cut resistant

cut resistant
whizard® metal mesh
Whizard® Metal Mesh
• Our double interlocked
metal mesh is formed using
state-of-the-art micro
plasma welding techniques
• Result is stronger, smoother,
hermetically sealed ring
connections that have no
gaps or weak spots
• Self-adjusting tensioning
system allows for easy fit
with no straps or buckles to
fasten
• No fabric cuffs to wear out
or become contaminated
• Easy to clean
• Serial number tags for
reissuance
Stainless Steel Mesh
• Superior cut and puncture protection
• 100% high grade stainless steel mesh with
hermetically sealed micro plasma welds
Titanium Mesh
• Over 43% lighter than stainless steel – helps reduce
the incidence of repetitive strain injuries
• Titanium is non-allergenic
• 100% non-corrosive when exposed to salt water
• Helps to retain body warmth and resists cold transfer
Note: All Whizard® Metal Mesh is sold by the dozen pieces.
Stainless steel mesh and titanium mesh gloves are available in
various styles. Each style is available in sizes XXS, XS, S, M, L, XL and XXL.
Hand Glove
2" Cuff
Stainless
Steel
CM030000
CM030001
CM030002
CM030003
CM030004
CM030005
CM030006
$1,530.00
Titanium
TT030000
TT030001
TT030002
TT030003
TT030004
TT030005
TT030006
$3,330.00
Size
XXS
XS
S
M
L
XL
XXL
CM030500
CM030501
CM030502
CM030503
CM030504
CM030505
CM030506
$2,010.00
TT030500
TT030501
TT030502
TT030503
TT030504
TT030505
TT030506
$4,740.00
XXS
XS
S
M
L
XL
XX
7-1/2" Cuff
Stainless
Steel
CM031900
CM031901
CM031902
CM031903
CM031904
CM031905
CM031906
$3,810.00
Size
XXS
XS
S
M
L
XL
XXL
Micro plasma weld
Resistance weld
Micro plasma welds create
value. Links are stronger so
the gloves wear longer. There
is also a lower risk of contamination because, unlike
resistance welded mesh rings,
micro plasma welded rings
leave no gaps to trap soil.
For complete product and ordering
information call 800-481-7450.
NOTE: Cut resistant gloves are extremely cut-resistant but not cut-proof. Do not subject to high-speed
or highly serrated blades. Always disconnect power before cleaning or removing slicer blades.
5
cut resistant
whizard®
Whizard®
• The industry innovator
and clear leader in the cut
resistant glove category,
with the widest range of
materials and technologies
for every application
• Pioneering technology has
produced advanced,
technically superior,
patented cut resistant fiber
combinations
• The only company in the
world that manufactures
cut resistant products in
every major category from
titanium metal mesh to
knits containing Kevlar®
Handguard II®
Heavy duty.
Patented combination of high
performance fibers, and stainless
steel. Unmatched combination of
cut resistance and comfort.
Excellent thermal properties.
Ambidextrous.
Sold by the dozen pieces.
Size
XXS
XS
S
M
L
XL
Beige
134147
333019
333021
333023
333025
333027
$310.80
Gray
134851
134852
134853
134854
134855
134856
$310.80
High strength
fibers
Dual stainless
steel core
Most Whizard® gloves,
are made from a patented
combination of stainless
steel and high performance
cut resistant fibers.
Many of the products in this section
have been produced in Philadelphia,
Mississippi in accordance with the
standard set for ISO 9001:2000.
For complete product and ordering
information call 800-481-7450.
6
cut resistant
Heavy Duty Slipguard
Heavy duty cut protection and slip
resistance. Our industry leading
Handguard II® glove construction
with polyurethane grip pattern.
Ideal for the pulp and paper
industry as well as for plastic
trimming. Style “B” pattern has
extra coating in high wear areas.
Sold by the dozen pieces.
“B” Pattern for paper slabbing
Whizard® Heavy Duty
Slipguard’s “B” grip
pattern is specially
designed to meet the
needs of the pulp and
paper industry.
• Superior cut resistance
protects workers from
“Doctor Blades”
• Grip pattern for secure
hold on knives and
product
• No grip on the lower
palm area allows
workers to slide hands
effortlessly across
the paper
HD Slipguard
Size
XXS
XS
S
M
L
XL
Std Cuff
Left
134156
133787
133791
133795
133799
133803
$408.00
Right
134157
133788
133792
133796
133800
133804
$408.00
Ext. 6" Cuff
Left
Right
N/A
N/A
333529 333528
333533 333532
333537 333536
333541 333540
333545 333544
$488.70
$488.70
10" Armguard Attached
Left
Right
134164 134165
133870 133871
133874 133875
133878 133879
133882 133883
133886 133887
$586.20
$586.20
HD Slipguard Style “B” Pattern
Size
XXS
XS
S
M
L
XL
Std Cuff
Left
N/A
333548
333551
333554
333557
333561
$397.20
Right
N/A
333547
333550
333553
333556
333560
$397.20
Ext. 6" Cuff
Left
Right
134162 134163
133899 133900
133903 133904
133907 133908
133911 133912
133915 133916
$488.70
$488.70
10" Armguard Attached
Left
Right
N/A
N/A
134706 134707
134709 134710
134712 134713
134715 134716
134718 134719
$586.20
$586.20
The exclusive polyurethane
coating process assures
outstanding adhesion of
coating to glove.
For complete product and ordering
information call 800-481-7450.
NOTE: Cut resistant gloves are extremely cut-resistant but not cut-proof. Do not subject to high-speed
or highly serrated blades. Always disconnect power before cleaning or removing slicer blades.
7
cut resistant
Knifehandler
Whizard® Gray
Knifehandler
In response to worker
demand, the Knifehandler
cut resistant glove was
improved. By enhancing
yarn construction and
manufacturing processes,
the new Knifehandler
offers:
•increased cut resistance
•better dexterity
•gray color in addition to
the traditional white.
Heavy duty. The original knife hand glove for the meat
industry. Single-end yarn construction for highest ratio
of cut protection to thickness available. Patented
combination of high performance fibers
and stainless steel. Excellent
thermal properties.
Ambidextrous.
Sold by the dozen pieces.
Whizard® grays are
also available in a
Handguard II® style.
Standard Knifehandler
Size
XXS
XS
S
M
L
XL
3" Cuff
134148
333368
333370
333372
333374
333376
$258.60
6" Cuff
N/A
333387
333388
333389
333390
333391
$269.70
3 Fingers
Dipped
N/A
133849
133850
133851
133852
133853
$282.30
W/10"
Attached
Fingerless Armguard
134755
N/A
333402
333392
333403
333393
333404
333394
333405
333395
333406
333396
$280.80
$410.10
Gray
3" Cuff
134913
134914
134915
134916
134917
134918
$258.60
Gripmaster
Heavy duty cut protection and slip resistance.
Patented combination of high performance
fibers and stainless steel. Ergonomically
designed polyurethane grip pattern. Also ideal
for plastics trimming. Sold by the dozen pieces.
Size
XXS
XS
S
M
L
XL
For complete product and ordering
information call 800--481-7450.
8
Left
134167
333588
333592
333596
333600
333604
$342.00
Right
134166
333587
333591
333595
333599
333603
$342.00
Fingerless
Left
Right
N/A
N/A
333565 333566
333569 333570
333573 333574
333577 333578
333581 333582
$420.60
$420.60
cut resistant
Guardsman Plus®
Heavy duty. Patented combination of
Vectran® and stainless steel. Special “plaiting”
technology. Cotton plaited to inside, resulting
in greater comfort. Easy to remove. Heat
protection up to 300˚F. Ambidextrous.
Sold by the dozen pieces.
Size
XXS
XS
S
M
L
XL
Reg.
Cuff
N/A
134141
134142
134143
134144
134145
$408.00
Open
Cuff
134171
134121
134122
134123
134124
134125
$408.00
With 10"
Attached
Armguard
134241
134242
134243
134244
134245
134246
$520.20
All Whizard® gloves are
easy to clean and care for.
You can wash by:
Hand
Method
Machine
Method
SteelGuard
Medium duty. Medium weight stainless steel
and polyester. Special “plaiting” technology.
Cotton plaited to inside, resulting in greater
comfort. Continuous cuff. Sold by the dozen
pieces.
5200 Plain palm; sizes XS, S, M, L, XL - $171.90
5210 With gripper dots; sizes XS, S, M, L, XL - $184.20
Note: Must specify left or right hand at
the time of purchase for 5210.
Dishwasher
Method
Proper care will extend
the service life of the
gloves, maintain their
appearance and reduce
replacement costs.
Note: Low heat machine dry or air dry.
Defender II®
Medium duty. Combination of Spectra®, fiberglass
and stainless steel. Unequaled in performance
and value. Ambidextrous. Sold by the dozen pieces.
Size
XXS
XS
S
M
L
XL
3" Cuff
135371
135318
135319
135320
135321
135322
$188.70
6" Cuff
N/A
135310
135311
135312
135313
135314
$198.60
NOTE: Cut resistant gloves are extremely cut-resistant but not cut-proof. Do not subject to high-speed
or highly serrated blades. Always disconnect power before cleaning or removing slicer blades.
For complete product and ordering
information call 800-481-7450.
9
cut resistant
Talon®
Medium duty. Patented combination of Spectra®,
Vectran® and stainless steel. Medium duty knife hand
and general use glove. “Second skin” fit. Unmatched
combination of cut resistance, dexterity and
durability. Ambidextrous. Sold by the dozen pieces.
Whizard® Talon is
considered the meat
processing industry’s
number one glove. Its
“second skin” fit and
flexibility, plus its excellent
durability, make Talon an
excellent choice when
worn as a liner or by itself.
Size
XXS
XS
S
M
L
XL
134530
134531
134532
134533
134534
134535
$231.90
Silver Talon®
Medium duty. Our Talon glove with
silver color to better conceal stains.
Available plain or with urethane
grip pattern, ensuring longer wear
life. Sold by the dozen pieces.
Size
XXS
XS
S
M
L
XL
Std.
134524
134525
134526
134527
134528
134529
$231.90
Urethane Pattern
Left
Right
134656
134657
134659
134660
134662
134663
134665
134666
134668
134669
134671
134672
$272.70
$272.70
Silver Talon MasterGrip™
Applications: Medium Duty
Special Features: One-Glove
Solution; combines best
features of leather with
exceptional cut resistance.
Silver Talon MasterGripTM
Medium duty. Our Silver Talon combined with
leather palm and fingers. Leather provides good
abrasion resistance and added durability and
protection. For sheet metal applications, the
leather palm absorbs oil, resulting in a better grip.
Glove provides superior cut and heat protection.
Sold by the dozen pieces.
Suggested Industries: Glass
Handling, Metal Stamping,
Pulp & Paper, Warehouse
Size
XS
S
M
L
XL
For complete product and ordering
information call 800-481-7450.
10
Left
134766
134769
134772
134775
134778
$417.60
Right
134767
134770
134773
134776
134779
$417.60
cut resistant
Liner III
Medium duty. Spectra®, stainless steel and
fiberglass. Gray to better conceal stains.
“Second skin” feel allows use alone or as
a liner. Ambidextrous. Sold by the dozen pieces.
Size
XXS
XS
S
M
L
XL
135340
135341
135342
135343
135344
135345
$218.40
Special rubber coating
High performance cutresistant fiber
Cotton lining
Gripguard
Medium duty. Special rubber coating on
ultra high strength fabrics and stainless
steel. Protects against oils and chemicals.
Provides superior slip resistance. Gripguard
Heavy Duty features rough grip surface.
Sold by the dozen pieces.
Gripguard gloves feature
stainless steel wrapped
in high strength fibers.
A special moisture-resistant
rubber coating and cotton
lining complete the glove.
Gripguard Heavy Duty
Size Left
Right
S
134557
134556
M
134560
134559
L
134563
134562
$438.00
$438.00
Slipguard®
Medium duty. High performance. Patented
combination of Spectra®, fiberglass and
stainless steel. Cut protection and slip resistance
combined. Coated with unique low-friction
urethane pattern. Sold by the dozen pieces.
Size
XXS
XS
S
M
L
XL
Left
134154
133550
133554
133558
133562
133566
$330.90
Right
134155
133551
133555
133559
133563
133567
$330.90
NOTE: Cut resistant gloves are extremely cut-resistant but not cut-proof. Do not subject to high-speed
or highly serrated blades. Always disconnect power before cleaning or removing slicer blades.
For complete product and ordering
information call 800-481-7450.
11
cut resistant
Liner II
Medium duty. Combination of
Spectra®, fiberglass and stainless steel.
Gray to better conceal stains. Wear
alone or as a liner. Ambidextrous.
Sold by the dozen pieces.
Size
XXS
XS
S
M
L
XL
Liner II Applications:
• Metal stamping
• Parts handling
• Glass handling
• Sheet rolling
• Rubber trimming
• Plastic trimming
134149
333132
333134
333136
333244
333278
$288.60
Golden Grip®
Medium duty. Combination of high performance
fibers with an overwrap of yellow polyester.
Glove is also plaited with polyester for enhanced
comfort and wicking. Ergonomically designed,
polyurethane grip pattern. Available with
standard pattern or style B pattern grip.
Sold by the dozen pieces.
Part No. (Left Hand)
Size
XXS
XS
S
M
L
XL
Reg. Cuff
“Std.” / “B”
134328 / 134389
134332 / 134393
134336 / 134397
134340 / 134403
134344 / 134407
134348 / 134411
$367.20 / $367.20
6" Ext. Cuff
“Std.” / “B”
N/A / N/A
134480 / 134425
134484 / 134429
134488 / 134433
134492 / 134437
134496 / 134441
$420.60 / $420.60
Armguard
“Std.”
134500
134504
134508
134512
134516
134520
$496.50
Part No. (Right Hand)
Size
XXS
XS
S
M
L
XL
Reg. Cuff
“Std.” / “B”
134329 / 134390
134333 / 134394
134337 / 134399
134341 / 134404
134345 / 134408
134349 / 134412
$367.20 / $367.20
6" Ext. Cuff
“Std.” / “B”
N/A / N/A
134481 / 134426
134485 / 134430
134489 / 134434
134493 / 134438
134497 / 134442
$420.60 / $420.60
Armguard
“Std.”
134501
134505
134509
134513
134517
134521
$496.50
Golden Grip’s
“B” Grip Pattern
For complete product and ordering
information call 800-481-7450.
12
Golden Grip’s
Standard
Grip Pattern
cut resistant
Golden Guard MasterGripTM
Medium duty. Our high performance Golden
Guard® glove with leather palm and fingers for
superior grip and added durability and protection.
Ideal for metal handling, product sorting and
blade changing. Sold by the dozen pieces.
Size
XS
S
M
L
XL
Left
134803
134806
134809
134812
134815
$498.00
Right
134804
134807
134810
134813
134816
$498.00
Whizard® gloves, available
in six sizes, have color
coded wrists to simplify
sizing and re-issuance.
MetalGuard
Extra, Extra Small
Light duty. Kevlar®, Vectran, stainless steel and
polyester blend protects from abrasions. Twice
the wear life of standard spun knit cut
resistant gloves. Available with a dotted
or criss cross coated palm on the
Heavyweight style. Sold by the
dozen pair.
Heavyweight, green/yellow
1880 (shown right) Sizes S, M, L, XL- $181.50
1879 PVC criss cross pattern on
both sides; sizes S, M, L, XL - $198.90
1881 Blue PVC dots on both sides;
sizes S, M, L, XL - $196.50
Mediumweight, gray/yellow
1878 (shown left) Sizes S, M, L, XL - $165.00
Extra Small
Small
Medium
Large
Extra Large
Hy-Guard®
Light duty knife hand glove. Patented
combination of Vectran® and stainless steel
with the feel of cotton. Ambidextrous.
Sold by the dozen pieces.
Size
XS
S
M
L
XL
Std.
3" Cuff
134076
134077
134078
134079
134080
$261.60
Ext.
6" Cuff
134131
134132
134133
134134
134135
$272.70
For complete product and ordering
information call 800-481-7450.
NOTE: Cut resistant gloves are extremely cut-resistant but not cut-proof. Do not subject to high-speed
or highly serrated blades. Always disconnect power before cleaning or removing slicer blades.
13
cut resistant
Merlin®
Light duty. Patented combination of Vectran®
and stainless steel. “Second skin” fit under
standard work gloves. Colored cuff for easy
identification. Sold by the dozen pieces.
Size
XS
S
M
L
XL
Std.
134007
134008
134009
134010
134011
$288.30
Defender®
Light duty. Patented combination of
Spectra® and stainless steel. Excellent
thermal properties. Lightweight, flexible.
Ambidextrous. Sold by the dozen pieces.
Size
XS
S
M
L
XL
Sizing Chart
Production Products offers
convenient sizing charts
for cut resistant gloves
to ensure proper fit and
comfort. This will help
provide you the dexterity
to do your job effectively.
3" cuff
133894
133895
133896
133897
133898
$237.90
6" cuff
133613
133614
133615
133616
133617
Prepguard
Light duty. Combination of Spectra®
and stainless steel. Lightweight and
comfortable. Ambidextrous. Sold by
the dozen pieces.
Size
XS
S
M
L
XL
For complete product and ordering
information call 800-481-7450.
14
133838
133839
133840
133841
133842
$256.80
cut resistant
Liteguard
Light duty. Combination of Vectran®
and stainless steel. Lightweight and
comfortable. Provides warmth. Use by
itself or as a liner. Ambidextrous.
Sold by the dozen pieces.
Size
XXS
XS
S
M
L
XL
134152
133929
133930
133931
133932
133933
$251.10
BacFighter™
MicroSafe® Fiber
Light to medium duty. Spectra Guard fiber for cut and
abrasion resistance plus MicroSafe® fiber to inhibit bacterial
and fungal growth. Sold by thedozen pieces.
5300 BacFighter 1 lightweight;
sizes XS, S, M, L, XL - $194.40
5400 (shown) BacFighter 2 mediumweight;
sizes XS, S, M, L, XL - $201.60
5500 BacFighter 3 heavyweight;
sizes XS, S, M, L, XL - $201.60
Production Products has
specially designed patented
antimicrobial gloves.
MicroSafe® fiber offers an
additional layer of protection
from bacterial and fungal
growth. MicroSafe® fiber is
non-toxic and lasts the life of
the glove, even after repeated
washings. Gloves should continue to be washed and sanitized as part of your standard
glove maintenance program.
™
VS
Light to medium duty. A wireless option to
complement the Whizard® line of gloves. Made
using Spectra Guard™ for cut and abrasion
resistance. Superior tactile sensitivity.
Ambidextrous. Sold by the dozen pieces.
VS13
Size
XS
S
M
L
XL
White
135027
135028
135029
135030
135031
$157.50
Gray
135042
135037
135038
135039
135040
$157.50
VS7
Size
XS
S
M
L
XL
White
135258
135259
135260
135261
135262
$181.50
NOTE: Cut resistant gloves are extremely cut-resistant but not cut-proof. Do not subject to high-speed
or highly serrated blades. Always disconnect power before cleaning or removing slicer blades.
Gray
135249
135250
135251
135252
135253
$181.50
For complete product and ordering
information call 800-481-7450.
15
cut resistant
ComfortGuard
Light duty. Designed for applications where
exceptional softness and warmth is preferred.
Outstanding shrink resistance compared to
competitive gloves. Patented double strand
construction of high strength fibers. Two levels of
protection: lightweight for increased comfort and
flexibility, heavyweight for increased cut resistance.
Ambidextrous. Sold by the dozen pieces.
Cut-Tec™ with Spectra®
High Performance Fiber
• Cut-Tec™ wireless cut
protection features a core
containment system for
increased comfort
• Highly engineered
Spectra® composite fiber
provides durability and
increased cut protection
• Spectra® offers lightweight
strength, making it the
best combination of cut
protection and tactile
sensitivity.
• Pound for pound, Spectra®
is 10x stronger than steel.
• Excellent chemical
resistance and flexibility.
• Spectra® is chemically
inert. Exposure to
seawater and chemicals
such as gasoline,
kerosene, hydraulic fluid
etc., will not degrade
Spectra®.
Series I–light
Size White
XXS 135282
XS
135283
S
135284
M
135285
L
135286
XL
135287
$173.10
Gray
135229
135230
135231
135232
135233
135234
$173.10
cut-tec™
Cut-Tec™
Highly engineered Spectra Guard™ composite
fiber and Lycra®. Spectra® knit’s cut and abrasion
resistance provides protection without
sacrificing tactile sensitivity. Ambidextrous.
Sold by the dozen pieces.
Y5858 Ultra light weight; sizes S, M, L, XL - $81.30
For complete product and ordering
information call 800-481-7450.
16
Series II–heavy
Size White
XXS 135288
XS
135289
S
135290
M
135291
L
135292
XL
135293
$179.40
Gray
135275
135276
135277
135278
135279
135280
$179.40
cut resistant
Kevlar® is the solution for
many high performance
metal working and general
industrial applications
requiring these properties:
• high tensile strength
• low density
• resistance to corrosion
• cut protection without
sacrificing comfort and
dexterity
kevlar® cut-resistant by jomac®
Heavyweight MetalGuard
Kevlar®, stainless steel and polyester blend
protects from abrasions. Twice the wear life of
standard spun knit cut resistant gloves. Also
available with PVC dots or criss cross pattern.
Green/yellow. Sold by the dozen pair.
1880 Plain; sizes S, M, L, XL - $181.50
1881 (shown) Blue PVC dots on both sides;
sizes S, M, L, XL - $196.50
1879 PVC criss cross on both sides;
sizes S, M, L, XL - $198.90
Cut Protection
Performance Test
1.60
Kilograms to cut one inch
1.6 -
Mediumweight MetalGuard
1.4 -
1.35
1.2 1.0 - .90
0.8 0.6 0.4 0.2 -
Innovative combination of Kevlar®, Vectran
stainless steel and polyester. Provides a longer
wear life compared to a standard spun knit
cut resistant glove. Grey/yellow.
Ambidextrous.
Sold by the dozen pair.
1878 Sizes S, M, L, XL - $165.00
0-
Kevlar®
Kevlar®
(14 oz.)*
(20 oz.)*
Kevlar®
Plus
(20 oz.)*
Kevlar® Plus offers 18%
more cut resistance than
standard Kevlar® brand fiber
yet still features the same
heat and flame resistance.
ASTM 1790-97
* (weight ounces/square yard)
For complete product and ordering
information call 800-481-7450.
NOTE: Cut resistant gloves are extremely cut-resistant but not cut-proof. Do not subject to high-speed
or highly serrated blades. Always disconnect power before cleaning or removing slicer blades.
17
cut resistant
Kevlar® Medium Heavyweight
100% Kevlar® string type. Reinforced
thumb stitch. Continuous cuff.
Ambidextrous. Sold by the dozen pair.
1877 (shown) Sizes S, L - $134.40
Heavyweight 100% Kevlar® string
type. Reinforced thumb stitch.
Continuous cuff. Sold by the
dozen pair.
1803 Sizes S, M, L - $135.60
1813 With PVC dots on both sides;
size L - $146.40
Kevlar® Medium Weight
100% Kevlar® string type. Continuous cuff.
Sold by the dozen pair.
1800 (shown) Sizes S, M, L, XL - $79.20
1810 With PVC dots on both sides;
sizes S, M, L, XL - $88.80
Kevlar®/Cotton
Layered medium weight string type.
Kevlar® outside, cotton inside.
Sold by the dozen pair.
1804 Sizes S, M, L, XL - $54.60
1804NBC With nitrile blocks on one side;
sizes S, L - $73.80
1814 With dots on both sides;
sizes S, M, L, XL - $64.20
For complete product and ordering
information call 800-481-7450.
18
cut resistant
Flexi-Guard
The Flexi-Guard offers cut
protection and incredible
dexterity. Made of 100%
DuPont Kevlar®, Flexi-Guard
delivers the cut protection
of an aramid and the
comfort of a light cotton
glove. Plus, longer-wearing
Flexi-Guard will outlast
cheaper cotton
gloves—reducing the
cost of your overall
glove program.
Recommended for
assembly
operations where
dexterity is crucial.
Flexi-Guard
Lightweight 100% Kevlar®
string type. Continuous cuff.
Ambidextrous. Sold by the
dozen pair.
Y1700 Sizes XS, S, M, L, XL - $49.80
Why choose low-linting
Kevlar® Kleen?
Controlled environments—
such as those created for the
manufacture of electronics,
pharmaceuticals and paint
booths—have specific
requirements regarding
contaminants. Particles are a
category of contaminant that
includes solid matter, such as
human skin flakes, dust and
fibers from clothing. Lowlinting protective gloves such
as Kevlar® Kleen should be
specified for applications
within these environments
requiring product protection
and light-duty cut resistance.
Depending on the specific
requirements, they can be
worn alone or under
approved disposable gloves.
Kevlar® Kleen
Ideal for cleanrooms and other environments
requiring product and personal protection.
Low-linting. 100% Kevlar® string type in two
weights. Continuous cuff. Sold by the dozen pair.
1830 Medium weight; sizes S, M, L - $106.80
1840 Medium weight with PVC dots on both
sides; sizes S, M, L - $115.80
1833 (shown) Heavyweight; sizes S, M, L - $130.80
For complete product and ordering
information call 800-481-7450.
NOTE: Cut resistant gloves are extremely cut-resistant but not cut-proof. Do not subject to high-speed
or highly serrated blades. Always disconnect power before cleaning or removing slicer blades.
19
cut resistant
cut-resistant liners
Thin, highly reusable,
cut resistant glove liners
provide protection in critical
environment applications.
Whizard® Liner
Combines stainless steel and polyester
while preserving tactile sensitivity. Use as a
liner or stand alone. Black. Ambidextrous.
Sold by the dozen pair.
M281 Sizes S, M, L, XL - $189.00
• Combines tactile sensitivity
and cut resistance
• Economical
• Provides protection from
latex allergies
• Part of a complete line
of Critical Environment
product and hand
protection. See pages
83-86.
Spectra®/Lycra Liner
Lightweight. Moderate cut resistance.
High reusability. Sharp objects “slide”
across surface. Ambidextrous. Sold by
the dozen pair.
M214 Sizes XS, S, M, L, XL - $223.50
Spectra® High
Performance Fiber
• Spectra® offers lightweight
strength, making it the best
combination of cut
protection and tactile
sensitivity.
• Pound for pound Spectra®
is 10x stronger than steel.
Kevlar® Liners
Lightweight Kevlar®.
Economical, good cut
resistance. Ambidextrous.
Sold by the dozen pair.
M79 Sizes S, M, L - $59.40
For complete product and ordering
information call 800-481-7450.
20
cut resistant
From the meat industry to
paper mills, where arms are
exposed to blades and other
sharp objects, you need high
performance cut resistant
armguards for protection.
whizard® armguards and sleeves
Whizard® Armguard II
Armguards protect arms from lacerations and
provide thermal protection from hot surfaces.
Medium Duty Armguards
333477 10" Forearm sleeve, gray - $294.60
333480 20" Sleeve with clip, gray - $488.70
333482 22" Sleeve with clip, gray - $510.30
Excellent for plastic trimming,
metal handling, glass
manufacturing and door and
window manufacturing.
Heavy Duty Armguards
333559 (shown) 10" Forearm sleeve, white - $322.80
333562 20" Sleeve with clip, white - $510.30
333564 22" Sleeve with clip, white - $534.00
Whizard® Defender Armguards
133680 (shown) 10” Forearm sleeve, blue - $264.60
333584 12" Forearm sleeve with clip, blue - $299.40
133681 20" Sleeve with clip, blue - $441.30
133683 22" Sleeve with clip, blue - $454.80
Whizard® Defender II Armguards
134073 7-1/2" Forearm sleeve, white - $289.80
134030 20" sleeve, white - $378.00
134052 20" sleeve, gray - $389.40
Whizard® Merlin Armguard
134000 12" Forearm sleeve with
V & clip, white - $374.40
Note: All Whizard® Armguards are
sold by the dozen pieces.
For complete product and ordering
information call 800-481-7450.
NOTE: Cut resistant gloves are extremely cut-resistant but not cut-proof. Do not subject to high-speed
or highly serrated blades. Always disconnect power before cleaning or removing slicer blades.
21
cut resistant
Heavyweight MetalGuard Sleeves
Cut resistant 2-ply knit sleeves. Combination of Kevlar®,
stainless steel and polyester. Green/yellow.
SK-10-KSC 3" width x 10" length - $62.40
SK-14-KSC (shown) 3" width x 14" length - $87.30
SK-16-KSC 3" width x 16" length - $99.90
SK-18-KSC 3” width x 18" length - $112.20
SK-22-KSC 3" width x 22" length - $137.40
SK-24-KSC 3" width x 24" length - $149.70
Jomac® brand Kevlar®
sleeves are available with
optional thumb hole. The
feature adds protection
to palm area and back of
the hand. It also serves
to hold sleeve in place
better, increasing wearer
comfort. Add “H” after
item number when
ordering.
kevlar® sleeves
Kevlar® Sleeves
Cut- and flame-resistant 2-ply knit sleeves.
100%Kevlar®
SK-10 3" width x 10" length - $32.40
SK-14 3" width x 14" length - $45.30
SK-16 3" width x 16" length - $51.90
SK-18 (shown) 3” width x 18" length - $58.20
SK-22 3" width x 22" length - $71.40
SK-24 3" width x 24" length - $77.70
Kevlar® Sleeves with Cotton Lining
SK-10-KCL 3" width x 10" length - $23.70
SK-14-KCL 3" width x 14" length - $33.00
SK-16-KCL 3" width x 16" length - $38.10
SK-18-KCL (shown) 3" width x 18" length - $42.60
SK-22-KCL 3" width x 22" length - $52.20
SK-24-KCL 3" width x 24" length - $53.10
Kevlar® Twill Sleeves
SK-KT-07 7" Kevlar® twill sleeve, Kevlar® knit wrist - $72.60
Note: Add “TACK” after style number to designate tacking.
Must specify tack location at time of purchase.
Note: Add “H” after style number to designate thumb hole.
Note: Add “T” after style number to designate thumb tab.
Note: Kevlar® sleeves are sold by the dozen pieces.
For complete product and ordering
information call 800-481-7450.
22
leather
washable full leather drivers
Washable Full Grain Cowhide
LL
Wells Washables™
Wells Lamont brand washable
leather gloves offer
outstanding softness and
comfort. In fact, they become
softer with every wash. Other
leather products shrink when
washed and become stiff and
uncomfortable.
• All Wells Washables™
feature high quality cowhide
or pigskin
• Packaging includes complete
care instructions
• Men’s and women’s popular
styles including leather palm.
S L A MO
NT
WE
Washable saddletan cowhide.
Keystone thumb, ball and tape
wrist closure. Self hemmed.
Side vent. Sold by the dozen pair.
Y1190 Men’s; Sizes M, L, XL - $312.90
PLATINUM
PLA
TINUM
ATHERS
LL
S L A MO
NT
WE
LE
LE
ATHERS
LL
S L A MO
NT
WE
PLATINUM
PLA
TINUM
PLATINUM
PLA
TINUM
ATHERS
LL
S L A MO
NT
WE
LE
PLATINUM
PLA
TINUM
ATHERS
LL
S L A MO
NT
WE
LE
PLATINUM
PLA
TINUM
LE
WE
Hand Washing
Remove excess dirt. While
wearing gloves, wash in
warm water using a mild
abrasive soap. Wring gently.
Put the gloves back on and
apply a natural leather
conditioner into the leather.
Hang to dry at room
temperature.
LL
S L A MO
NT
WE
NT
PLATINUM
PLA
TINUM
Gold
LE
ATHERS
Solutions
When looking for quality
and value, look to
Production ProductsS LGold
A MO
LL
Solution drivers gloves.
Top
quality grain leathers
made
PLATINUM
PLA
TINUM
to provide durableLEAwear.
T H ERS
Gunn cut with shirred wrists.
LL
S L A MO
NT
WE
Machine Washing
Remove excess dirt. For best
results, wash separately in
warm water (104°F) using
liquid laundry detergent. Do
not use chlorine bleach.
Tumble dry on low heat.
Remove from dryer; allow to
cool before wearing.
ATHERS
PLATINUM
PLA
TINUM
LE
ATHERS
For complete product and ordering
information call 800-481-7450.
23
leather
full leather drivers
The ball and tape closure on
a number of drivers helps
keep dirt and debris from
entering the glove and
irritating workers’ skin.
Grain Deerskin
LL
ATHERS
LL
S L A MO
NT
WE
LE
S L A MO
NT
WE
Premium quality deerskin with
cotton/DuPont Lycra® spandex back.
Gunn cut, wing thumb. Bound hem.
Sold by the dozen pair. PLA
PLATINUM
TINUM
Y0925 Sizes S, M, L, XL - $200.10
LE
ATHERS
LL
S L A MO
NT
WE
PLATINUM
PLA
TINUM
PLATINUM
PLA
TINUM
ATHERS
LL
S L A MO
NT
WE
LE
PLATINUM
PLA
TINUM
LE
ATHERS
Full leather drivers are the
choice for applications
requiring higher levels of
dexterity. Grain leather
offers the most comfort
and requires the least
amount of breaking in.
Grips® Grain Cowhide
LL
ATHERS
LL
S L A MO
NT
WE
LE
S L A MO
NT
WE
Premium quality. Lanolin cowhide.
Precurved design. Suede palm patch.
Gunn cut, keystone thumb. Self PLA
PLATINUM
TINUM
hemmed. Sold by the dozen pair.
Packaged for walk-in sales.
1150 Sizes S,M, L, XL - $374.40
LE
ATHERS
LL
S L A MO
NT
WE
PLATINUM
PLA
TINUM
PLATINUM
PLA
TINUM
ATHERS
LL
S L A MO
NT
WE
LE
PLATINUM
PLA
TINUM
Grain Cowhide with Ball
and Tape Wrist
LE
LL
LE
WE
ATHERS
LL
S L A MO
NT
For complete product and ordering
information call 800-481-7450.
S L A MO
NT
WE
Premium quality. Palomino grain with
lanolin cowhide. Gunn cut, straight
thumb. Bound hem. Sold by the dozen
pair. Packaged for walk-in sales.
PLATINUM
PLA
TINUM
1178 Sizes S, M, L, XL, XXL - $274.20
PLATINUM
PLA
TINUM
LE
ATHERS
LL
S L A MO
NT
WE
24
ATHERS
leather
In 1988 we changed our
tanning formula to add
lanolin, nature’s best skin
conditioner, in an effort to
make some of our glove
styles softer and more
flexible.
Grain Goatskin
LL
In abrasion testing, our
“lanolized” leather actually
lasted an average of 28%
longer than untreated
leather. To make a good
situation even better,
lanolin also helps the
leather repel moisture and
stay soft even after
wetting.
S L A MO
NT
WE
WE
NT
Top quality goatskin with
natural and added lanolin.
Excellent dexterity and
comfortable fit. Gunn cut,
LA M
keystone thumb. Bound hem. LLS O
PLATINUM
PLA
TINUM
Sold by the dozen pair.
LE
ATHERS
Y0769 XS, S, M, L, XL, XXL - $153.30
LE
ATHERS
LL
S L A MO
NT
WE
PLATINUM
TINUM
PLA
PLATINUM
PLA
TINUM
ATHERS
LL
S L A MO
Abrasion Test
NT
WE
LE
PLATINUM
PLA
TINUM
LE
Average wheel revolutions before
wearout.
ATHERS
Cowhide Leather
L A MO
S
LL
NT
WE
Grain Cowhide
PLATINUM
PLA
TINUM
ATHERS
LL
S L A MO
NT
WE
LE
Lanolized Cowhide Leather +28%
High quality. Gunn cut, straight
thumb. Bound hem. Double shirred
elastic wrist. Sold by the dozen pair.
Y0122 Sizes S, M, L, XL, XXL - $133.20
LE
ATHERS
LL
S L A MO
NT
WE
PLATINUM
PLA
TINUM
PLATINUM
PLA
TINUM
LE
ATHERS
Grain Cowhide
LL
S L A MO
ATHERS
LL
S L A MO
NT
WE
WE
LE
NT
Spandex/Lycra® back. Gunn cut,
PLATINUM
PLA
TINUM
straight thumb. Bound hem.
Sold by the dozen pair.
Y0125 Sizes S, M, L, XL - $120.30
PLATINUM
PLA
TINUM
ATHERS
LL
S L A MO
NT
WE
LE
PLATINUM
PLA
TINUM
LE
ATHERS
LL
S L A MO
NT
WE
For complete product and ordering
information call 800-481-7450.
PLATINUM
PLA
TINUM
LE
ATHERS
25
LL
S L A MO
NT
WE
leather
PLATINUM
PLA
TINUM
LE
WE
L A MO
LS
S L A MO
PLATINUM
PLA
TINUM
LE
PLATINUM
PLA
TINUM
ATHERS
ATHERS
LL
S L A MO
NT
WE
LE
LL
NT
WE
ATHERS
NT
L
NT
Top quality. Gunn cut, keystone thumb.
S L A MO
LL
Palm patch. Bound hem. Sold by the
PLATINUM
TINUM
dozen pair. Packaged for walk-in PLA
sales.
LE
ATHERS
1130 Sizes S, M, L, XL - $198.90
S L A MO
PLATINUM
PLA
TINUM
LE
ATHERS
WE
LL
NT
WE
Grain Cowhide
PLATINUM
PLA
TINUM
LL
ATHERS
NT
WE
LE
S L A MO
PLATINUM
PLA
TINUM
LE
ATHERS
LE
ATHERS
LL
S L A MO
Cowhide
WE
Gunn cut, keystone thumb.
Self hemmed. Sold by the
dozen
pair.
S LA M
O
LL
Y0153
Sizes S, M, L, XL - $136.50
PLATINUM
PLA
TINUM
WE
NT
WE
S L A MO
PLATINUM
PLA
TINUM
Grain
NT
ATHERS
NT
WE
LE
LL
NT
Silver
LE
ATHERS
Solutions
An economical solution for
leather drivers. Silver
Solutions offer the quality
you expect and the
great
S L A MO
LL
value you need. Gunn cut
with shirred wrist.
PLATINUM
PLA
TINUM
PLATINUM
PLA
TINUM
ATHERS
LL
S L A MO
NT
WE
LE
PLATINUM
PLA
TINUM
LL
S L A MO
NT
WE
LE
®
PLATINUM
PLA
TINUM
Grain Cowhide with Kevlar
Lining
LE
ATHERS
LL
S L A MO
NT
WE
WE
NT
Soft grain cowhide with DuPont Kevlar®
lining for added cut and heat protection.
S L A MO
LL
Gunn cut, straight thumb. Bound
hem.
PLATINUM
PLA
TINUM
Sold by the dozen pair.
LE
AT ERS
Y0075 Sizes M, L, XL - $449.10 H
PLATINUM
PLA
TINUM
LE
WE
LL
S L A MO
NT
For complete product and ordering
information call 800-481-7450.
ATHERS
PLATINUM
PLA
TINUM
LE
26
ATHERS
ATHERS
LL
S L A MO
NT
WE
leather
PLATINUM
LE
ATHERS
Grain Goatskin
LL
S L A MO
WE
NT
Quality goatskin. Gunn cut,
keystone thumb. Bound hem. PLATINUM
Sold by the dozen pair.
Y0107 Sizes S, M, L, XL - $70.80
LL
S L A MO
WE
ATHERS
A number of leathers
feature a keystone
thumb. This specially
designed onepiece, inset thumb
is double-sewn
and has double
thickness at the
critical wear point.
This construction
provides extra comfort
and allows extra wear.
NT
LE
PLATINUM
TINUM
PLA
ATHERS
LL
S L A MO
NT
WE
LE
PLATINUM
ATHERS
LL
S L A MO
NT
WE
LE
PLATINUM
LE
Brushed Pigskin
ATHERS
LE
S L A MO
NT
WE
Soft and comfortable. Gunn cut,
keystone thumb. Self hemmed.
Sold by the dozen pair.
PLATINUM
Y0324 Sizes S, M, L, XL - $210.00
LL
ATHERS
LL
S L A MO
NT
WE
Tensile Strength
PLATINUM
PLA
TINUM
ATHERS
LL
Before abrasion
After abrasion
S L A MO
NT
WE
LE
PLATINUM
LL
ATHERS
S L A MO
NT
WE
LE
PLATINUM
Grain Cowhide
LE
ATHERS
Quality cowhide. Gunn cut,
S L A MO
straight thumb. Bound
LL hem.
Sold by the dozen pair.
PLATINUM
L
S
Y0123 Sizes S, M, L, XLEAT-HE$R83.40
Cowskin
Goatskin
WE
NT
LL
Goatskin has higher natural tensile strength
and tends to hold this quality feature even
after abrasion.
S L A MO
NT
WE
Pigskin
PLATINUM
PLA
TINUM
LE
ATHERS
LL
S L A MO
NT
WE
For complete product and ordering
information call 800-481-7450.
PLATINUM
LE
ATHERS
27
WE
S L A MO
S L A MO
PLATINUM
PLA
TINUM
LE
PLA
PLATINUM
TINUM
ATHERS
ATHERS
LL
S L A MO
NT
WE
LE
LL
NT
LL
NT
WE
leather
LL
LE
S L A MO
ATHERS
NT
WE
PLATINUM
PLA
TINUM
Grain Cowhide
PLATINUM
PLA
TINUM
WE
ATHERS
L
Sold by
PLATINUM
TINUM
PLA
WE
LL
S L A MO
NT
PLATINUM
PLA
TINUM
PLATINUM
PLA
TINUM
LE
ATHERS
LL
ATHERS
S L A MO
NT
WE
LE
ATHERS
S L A MO
NT
WE
LE
LL
Gunn cut, straight thumb.
the dozen pair.
Y0163 Sizes XS, S, M, L, XL - $70.50
NT
LE
L A MO
LS
PLATINUM
PLA
TINUM
ATHERS
S L A MO
PLATINUM
PLA
TINUM
Bronze
LE
ATHERS
Solutions
The best possible value
that delivers quality and
consistency. Shirred wrist,
Gunn cut.
LL
S L A MO
NT
WE
LL
NT
WE
LE
PLATINUM
PLA
TINUM
LE
ATHERS
Grain Cowhide
LA M
LL
S L A MO
NT
WE
WE
NT
Economy choice. Gunn cut, straight LLS O
PLATINUM
TINUM
thumb. Bound hem. Sold by the PLA
LE
ATHERS
dozen pair.
Y0133 Sizes S, M, L, XL - $59.70
PLATINUM
PLA
TINUM
LE
WE
ATHERS
LL
S L A MO
NT
Gloves that feature a
wing thumb mirror
the natural shape
of the hand. The
gloves offer
comfortable
gripping and allow
the thumb to move
more freely. The
gloves also wear longer.
The thumb pattern is easily
identified: When the glove
is laid flat, thumb should
extend to the side.
PLATINUM
PLA
TINUM
ATHERS
LL
S L A MO
NT
WE
LE
PLA
PLATINUM
TINUM
Grain
Cowhide
LE
ATHERS
LL
ATHERS
LL
S L A MO
NT
WE
LE
S L A MO
NT
WE
Wraparound index finger
protects the seam from
wearing out. Gunn cut, wing
thumb. Bound hem.
PLATINUM
PLA
TINUM
Sold by the dozen pair.
Y0623 Sizes S, M, L, XL - $115.50
PLATINUM
PLA
TINUM
LE
For complete product and ordering
information call 800-481-7450.
28
ATHERS
LL
S L A MO
NT
WE
leather
PLA
PLATINUM
TINUM
ATHERS
LL
S L A MO
NT
Grain Pigskin
WE
LE
LL
S L A MO
NT
WE
PLATINUM
TINUM
Gunn cut, keystonePLA
thumb.
LE
ATHERS
Bound hem. Sold by the
dozen pair.
Y0323 Sizes S, M, L, XL - $75.30
PLA
PLATINUM
TINUM
ATHERS
LL
Straight Thumb Design
Cut as one piece with the
palm, the thumb extends
straight toward the
wrist. This style uses
less material than
the similar wing
thumb, reducing the
cost of the glove.
S L A MO
NT
WE
LE
PLATINUM
PLA
TINUM
ATHERS
LL
S L A MO
NT
WE
LE
PLATINUM
PLA
TINUM
ATHERS
LL
S L A MO
NT
WE
LE
PLATINUM
PLA
TINUM
LE
ATHERS
Split Cowhide
LL
S L A MO
NT
WE
S L A MO
NT
WE
Excellent value. Soft and
extremely flexible. Gunn cut,
straight thumb. Bound hem.
PLATINUM
PLA
TINUM
LE Sold
by the dozen pair.
ATHERS
Y1124 Sizes S, M, L, XL - $42.90
LL
PLATINUM
PLA
TINUM
LE
Leather Type
Abrasion
resistance
Puncture
resistence
Tensile
strengh
ATHERS
Breathablitity Flexibility
Tactile
sensitivity
Insulation
ability
Moisture
resistance
Relative
cost
Grain Pigskin
Best
High
Good
Best
High
High
Low
Best
Low
Grain Cowhide
High
Best
High
Fair
Good
Good
Good
Fair
Mid-range
Split Cowhide
High
Best
High
Fair
Fair
Fair
Good
Fair
Low
Grain Deerskin
Fair
Fair
Best
Fair
High
High
Best
Better
High
Grain Goatskin
High
High
High
Fair
High
High
Low
Good
Mid-range
NOTE: The table above is meant to give you a general indication of how various types of leather perform
in relation to each other during standard testing. For a recommendation on a specific application, consult
a Production Products glove specialist.
For complete product and ordering
information call 800-481-7450.
29
leather
washable leather palm
White Mule – W.O. Wells
created the first leather
palm glove in 1928, an
innovation that changed
the glove industry forever.
The quality of the craftsmanship and materials set
it apart, as it does today,
from all other work gloves.
Grain Pigskin Leather Palm
LL
ATHERS
LL
S L A MO
NT
WE
LE
S L A MO
NT
WE
Men’s washable pigskin leather
palm. Wing thumb, safety cuff.
100% cotton denim back. Sold by
the dozen pair.
PLATINUM
PLA
TINUM
Y3265 Size L - $192.60
LE
ATHERS
LL
S L A MO
NT
leather palm
WE
PLATINUM
PLA
TINUM
As for the gloves’ name...
while Wells moved slowly
past a field on a train ride
from New Orleans, he
spotted a group of big,
strong Louisiana mules.
The largest of the group, a
White Mule, caught Wells’
eye. He declared that the
glove would carry the
mule’s namesake and it
was immediately dubbed
The White Mule. The
name, said Wells, was “to
stand for strength and
hard work.”
PLATINUM
PLA
TINUM
ATHERS
LL
S L A MO
NT
WE
LE
PLATINUM
PLA
TINUM
LE
ATHERS
LL
S L A MO
NT
WE
Grain Cowhide Leather Palm
PLATINUM
PLA
TINUM
ATHERS
LL
S L A MO
NT
WE
LE
LE
ATHERS
LL
S L A MO
NT
WE
PLATINUM
PLA
TINUM
PLATINUM
PLA
TINUM
LE
ATHERS
Safety or Gauntlet Cuff
LL
LE
WE
ATHERS
LL
S L A MO
NT
For complete product and ordering
information call 800-481-7450.
S L A MO
NT
WE
LE
LL
PLATINUM
PLA
TINUM
LE
ATHERS
LL
S L A MO
N
E
30
S L A MO
NT
WE
Sewn with DuPont Kevlar® thread. Superior
grip. Comfortable fit. Wing thumb, full
feature. Sold by the dozen pair.
PLATINUM
PLA
TINUM
Y3014 (shown left) Safety cuff;
Sizes S, M, L, XL - $68.70
PLATINUM
PLA
TINUM
Y3015 (shown right) Gauntlet cuff;
Sizes S, L, XL - $71.40
ATHERS
Premium quality grain cowhide.
Exceptionally soft and flexible.
Gunn cut, wing thumb, full feature.
Sold by the dozen pair.
Y2008 (shown left) Safety cuff;
Sizes S, M, L, XL - $88.20
Y2009 (shown right) Gauntlet cuff;
Sizes S, M, L, XL - $91.50
LL
S L A MO
NT
WE
leather
PLATINUM
PLA
TINUM
LE
ATHERS
S L A MO
WE
Gunn cut, straight thumb. Full feature.
Sold by the dozen pair. Packaged for
walk-in sales.
224 (shown) Safety cuff;
Sizes XS, M, L, XL - $148.20
229 Gauntlet cuff; Sizes M, L, XL - $155.70
PLATINUM
PLA
TINUM
WE
NT
WE
S L A MO
PLATINUM
PLA
TINUM
LL
S L A MO
PLATINUM
PLA
TINUM
LE
NT
WE
WE
ATHERS
NT
LE
NT
ATHERS
LL
S L A MO
Gold
LE
ATHERS
Solutions
Production Products Gold
Solutions leather palms are
S L A MO
constructed with a select
LL
shoulder split or grain
PLATINUM
PLA
TINUM
leather. Full feature LEwith
ATHERS
leather index finger,
fingertips, knuckle strap
and pull, and heavy duty
rubberized cuffs. LLS LAMO
PLATINUM
PLA
TINUM
LE
LL
NT
LL
NT
WE
White Mule®
ATHERS
PLATINUM
PLA
TINUM
LE
ATHERS
LL
S L A MO
NT
WE
Kevlar® Lined Palm and
Back Cross Section
PLATINUM
PLA
TINUM
LE
Kevlar® Lined Palm and Back
ATHERS
LL
ATHERS
LL
S L A MO
NT
WE
LE
S L A MO
NT
WE
3/4 leather back. Palm is puncture
resistant. Extremely comfortable.
Gunn cut, straight thumb.
Sold by the dozen pair.
Y3550 Size L - $334.20
PLATINUM
PLA
TINUM
PLATINUM
PLA
TINUM
LL
ATHERS
Premium
split grain
leather
S L A MO
NT
WE
LE
Lined with
non-woven
Kevlar®
PLATINUM
PLA
TINUM
ATHERS
LL
3/4 leather
back
S L A MO
NT
WE
LE
PLATINUM
PLA
TINUM
LE
Sewn with
Kevlar®
ATHERS
Rubberized
safety cuff
For complete product and ordering
information call 800-481-7450.
31
Full Leather Back
LL
S L A MO
NT
WE
leather
PLATINUM
PLA
TINUM
LE
ATHERS
WE
ATHERS
LL
S L A MO
ATHERS
LL
S L A MO
PLATINUM
PLA
TINUM
ATHERS
LL
S L A MO
NT
WE
LE
PLATINUM
PLA
TINUM
LE
WE
ATHERS
LL
Double Palm
S L A MO
NT
S L A MO
PLATINUM
PLA
TINUM
PLATINUM
PLA
TINUM
LE
NT
WE
LE
NT
WE
LE
PLATINUM
PLA
TINUM
Nothing will
destroy a pair of
leather gloves
faster than
handling rough
wood. No one
knows this
better than the
lumber industry,
for which we
addressed the problem by
adding another thickness of
leather to the palm and
forefinger area.
LL
S L A MO
NT
Double Palm Leather
Gloves
LL
NT
WE
Select shoulder split leather. Wing thumb,
full feature. Sold by the dozen pair.
Y3102 Safety cuff; Size L - $47.40
PLATINUM
PLA
TINUM
Y3103 (shown) Gauntlet cuff;
Size L - $53.10
LE
ATHERS
ATHERS
Select shoulder split leather.
Wing thumb, safety cuff. Full
feature. Sold by the dozen pair.
WE
S L A MO
PLATINUM
PLA
TINUM
PLATINUM
PLA
TINUM
LE
WE
S L A MO
NT
LL
PLATINUM
PLA
TINUM
S L A MO
LE
NT
LL
ATHERS
ATHERS
WE
LE
L
NT
LL
NT
WE
Y3101 Sizes S, M, L, XL - $48.30
L A MO
LS
ATHERS
Knit Wrist Leather Palm
PLATINUM
PLA
TINUM
LE
ATHERS
LL
S L A MO
LE
ATHERS
LL
S L A MO
NT
WE
ATHERS
NT
WE
WE
S L A MO
Select shoulder split leather. Wing
thumb, full feature. Knit wrist
prevents debris from entering glove
PLATINUM
PLA
TINUM
and irritating skin. Sold by the dozen
pair.
Y3112 Size L - $36.00
NT
LE
LL
NT
Silver
LE
ATHERS
Solutions
Standard shoulder split
leather palms in our Silver
Solutions offer exceptional
S L A MO
LL
value. Striped backing with
PLATINUM
PLA
TINUM
rubberized cuffs.
WE
PLATINUM
PLA
TINUM
PLATINUM
PLA
TINUM
LE
32
ATHERS
LL
S L A MO
NT
WE
For complete product and ordering
information call 800-481-7450.
PLATINUM
PLA
TINUM
LE
ATHERS
leather
Safety or Gauntlet Cuff
S L A MO
WE
LL
LL
S L A MO
LE
ATHERS
LL
S L A MO
NT
WE
ATHERS
NT
WE
LE
NT
Select shoulder split leather.
PLATINUM
PLA
TINUM
Wing thumb, full feature.
Sold by
the dozen pair.
Y3106 (shown right) Safety cuff;
sizes XS, S, M, L, XL - $35.40
PLATINUM
PLA
TINUM
Y3107 (shown left) Gauntlet
cuff;
sizes XS, S, M, L, XL - $38.40
PLATINUM
PLA
TINUM
LA M
LL
WE
S L A MO
PLATINUM
PLA
TINUM
S L A MO
NT
LL
PLATINUM
PLA
TINUM
ATHERS
LL
S L A MO
NT
WE
LE
NT
WE
ATHERS
WE
LE
NT
S
O
LL
Gunn Cut
Constructed without
seams
PLATINUM
PLA
TINUM
on the back for Lextra
EATHERS
comfort. The palm side of
the middle two fingers is
S LA M
O the
separate and sewn
to
LL
palm at the base of the
PLATINUM
PLA
TINUM
middle two fingers
for
LE
ATHERS
increased wear life.
ATHERS
NT
WE
LE
Safety or Gauntlet Cuff
PLATINUM
PLA
TINUM
LE
ATHERS
WE
S L A MO
S L A MO
PLATINUM
PLA
TINUM
ATHERS
LL
S L A MO
NT
WE
LE
PLATINUM
PLA
TINUM
LE
ATHERS
LL
S L A MO
NT
WE
Full Cotton Back
PLATINUM
PLA
TINUM
LE
ATHERS
LL
S L A MO
For complete product and ordering
information call 800-481-7450.
NT
WE
Standard shoulder split palm.
Full cotton back makes gloves
cooler and more comfortable.
Knit wrist. Straight thumb.
Sold by the dozen pair.
Y3204 Sizes S, L - $13.80
S L A MO
PLATINUM
PLA
TINUM
Bronze
LE
ATHERS
Solutions
Production Products offers
you an economical choice
with our Bronze Solutions.
Cotton backing colors and
patterns are subject to
change—quality is not.
Not recommended for
heavy duty, long wear
applications.
ATHERS
NT
WE
LE
LL
NT
LL
PLATINUM
PLA
TINUM
LL
ATHERS
ATHERS
WE
WE
LE
NT
WE
LE
S L A MO
PLATINUM
PLA
TINUM
S L A MO
NT
LL
LL
NT
Standard shoulder split palm.
Wing thumb, full feature. Sold by
the dozen pair.
Y3201 (shown left) Safety cuff;
PLATINUM
PLA
TINUM
Sizes S, L - $22.50
Y3202 (shown right) Gauntlet cuff;
Sizes S, L - $24.90
PLATINUM
PLA
TINUM
LE
ATHERS
33
LL
S L A MO
NT
WE
leather
PLATINUM
PLA
TINUM
ATHERS
LL
S L A MO
NT
WE
LE
PLATINUM
PLA
TINUM
LE
ATHERS
Economy Choice
LL
ATHERS
LL
S L A MO
NT
WE
LE
S L A MO
NT
WE
Split leather. Wing thumb. Full
feature, safety cuff. Sold by the
PLATINUM
PLA
TINUM
dozen
pair.
Y3402 Sizes S, L - $26.10
PLATINUM
PLA
TINUM
ATHERS
LL
S L A MO
NT
WE
LE
PLATINUM
PLA
TINUM
ATHERS
LL
S L A MO
NT
WE
LE
PLATINUM
PLA
TINUM
LE
ATHERS
Economy Choice
LL
ATHERS
LL
S L A MO
NT
WE
LE
S L A MO
NT
WE
Split leather palm. Wing thumb, patch
palm. Full feature. Safety cuff. Sold by the
dozen
pair.
PLATINUM
PLA
TINUM
Y3308 Sizes S, L - $19.80
PLATINUM
PLA
TINUM
LE
For complete product and ordering
information call 800-481-7450.
34
ATHERS
leather
insulated leather
Thinsulate® Lined Driver
Black grain cowhide, full feature,
Gunn cut, keystone thumb, extended
knit wrist with pull tab. Knit wrist
combined with Thinsulate® lining
makes this our warmest glove.
Shirred elastic back. Sold by the
dozen pair. Packaged for walk in sales.
1100 Sizes S, M, L, XL - $211.80
Thinsulate® Lining
• One-and-one-half times the
warmth of down
• Twice the warmth of high
loft fiberfill insulations of
equal thickness
• Functional, lightweight,
breathable, durable
• Warmth without bulk
Thinsulate
®
Thermal Insulation
3M
Jersey Lined Driver
Grain cowhide full leather. Gunn
cut, straight thumb. Sold by the
dozen pair.
Y0022 Sizes S, M, L, XL - $195.00
Fleece/Foam Lined Driver
Grain cowhide full leather.
Gunn cut, straight thumb. Red
fleece over foam lining. Sold by
the dozen pair.
Y0032 Sizes S, M, L, XL, XXL -$120.30
For complete product and ordering
information call 800-481-7450.
35
leather
Thinsulate® Leather
Lined Palm
Premium grain pigskin
leather palm. Gunn cut,
wing thumb. Sold by the
dozen pair.
Y0042 Sizes S, M, L, XL - $136.50
Lined, Lime Green
Reflective Back
Premium grain pigskin, lined,
lime green with reflective back.
Knit wrist for extra warmth.
Gunn cut, wing thumb. Sold by
the dozen pair.
Y0026 Sizes S, M, L, XL - $157.20
For complete product and ordering
information call 800-481-7450.
36
leather
weldrite® welders
Premium Double Tanned Heavy
Split Cowhide
Double tanned, heavy, select side split cowhide
sewn with DuPont Kevlar® thread. Gunn cut,
reinforced straight thumb. Fully welted. Full flame
retardant hand sock lining. Sold by the dozen pair.
Y1903 Size L - $120.90
Premium Blue Select Split Cowhide
Blue, select side split cowhide sewn with
DuPont Kevlar® thread. Gunn cut, wing thumb,
full welting. One-piece back with foam lining
for extra heat protection. Sold by the dozen pair.
Y1925 Size L - $123.90
Welting adds durability and
greatly reduces the chance of
burn-through at the seams.
Rust Split Cowhide
Rust colored, standard shoulder split cowhide
sewn with DuPont Kevlar® thread. One-piece back,
Gunn cut, wing thumb, reinforced welting. Full
sock lining. Sold by the dozen pair.
Y1923 Size L - $96.30
Pearl Gray Split Cowhide
Standard shoulder split cowhide. One-piece
back, Gunn cut, wing thumb, reinforced
welting. Full sock lining. Sold by the dozen pair.
Y1901 Size L - $67.20
For complete product and ordering
information call 800-481-7450.
37
leather
weldrite® mig/tig welders
MIG/TIG Welders: The
choice for precision
welding applications
where fingertip
sensitivity is necessary.
Also ideal for other
general industrial
applications requiring
hand and forearm
protection as well as
dexterity.
Grain Sheepskin
Form-fitting sheepskin for extra dexterity. Rust
colored split leather 4" cuff. Gunn cut, straight
thumb. Sold by the dozen pair.
Y1961 Sizes S, M, L - $270.30
While lined select side
leather is recommended
for heavy welding
applications, a lightweight
leather glove, such as one
made of sheepskin, is
preferred for
MIG (Metal Inert Gas) and
TIG (Tungsten Inert Gas)
welding.
• These types of welding
do not generate the high
heat of arc welding
• In the case of TIG
welding, great dexterity
is required to make the
intricate welds
• Sheepskin, a superior, thin
leather made from the
hides of South African
hair sheep, enhances
dexterity because of its
softness, durability and
sensitivity
Grain Cowhide
Cowhide with contrasting split leather
4" cuff. Sewn with DuPont Kevlar®
thread. Gunn cut, wing thumb. Sold by
the dozen pair.
Y2001 Sizes S, M, L, XL - $233.40
Grain Cowhide/Kevlar® Thread
Grain cowhide sewn with DuPont Kevlar®
thread. Split leather 4" cuff. Gunn cut,
wing thumb. Sold by the dozen pair.
Y2021 Sizes S, M, L, XL - $138.00
Grain Cowhide/Canvas Cuff
Grain cowhide with durable canvas
4" cuff. Clute cut, straight thumb.
Sold by the dozen pair.
Y2010 Sizes S, M, L, XL - $122.70
For complete product and ordering
information call 800-481-7450.
38
leather
sug®
SUG® 870
TM
Premium synthetic leather. Breathable
Dimension 3™ directional stretch mesh
back and Airdex™ breathable stretch
finger inserts. Feeltite™ wrist for custom
fit. Closed cell neoprene knuckle strap for
superior flexibility. Slimfit™ shaped
construction. Packaged for walk-in sales.
Available in all black or assorted colors of
the back material. Sold by the dozen pair.
870K Black back; sizes S, M, L, XL - $260.40
870 Assorted back colors; sizes S, M, L, XL - $260.40
Work hard, play hard!™
With the new SUG® Sport
Utility Gloves, have some fun
with a product line that’s
finally changed to meet the
demands of today’s users.
Finally a bold and exciting
new approach that goes way
beyond plain old work
gloves. We’ve taken a tired
category that really hasn’t
changed in over 70 years and
redefined it using our sport
glove expertise developed
over the last 40 years. We’ve
combined the best of work
and sport gloves to create
the SUG®...Sport Utility Glove™.
SUG® 854
Patented Grips® precurved design reduces
hand fatigue. Ventilated premium grain
pigskin leather. OverWrap™ fingertips for
extra wear. Airdex™ breathable stretch
spandex back available in black or assorted
colors. Anti vibration padded reinforced
palm patch. Deer split finger sidewalls for
super comfort. Slimfit™ shaped
construction. Slimfit™ safety cuff.
Sold by the dozen pair.
854K Black back; sizes S, M, L, XL - $246.60
854 Assorted back colors;
sizes S, M, L, XL - $246.60
SUG® 848
Patented Grips® precurved design
reduces hand fatigue. Ventilated
premium grain cowhide leather.
Airdex™ breathable stretch spandex
back. Feeltite™ wrist for custom fit.
Recovery™ 4 way stretch fabric finger
inserts. Duraflex™ reinforced palm
patch, thumb and fingertips.
Sold by the dozen pair.
848 Black; sizes S, M, L, XL - $224.70
For complete product and ordering
information call 800-481-7450.
39
leather
TM
SUG® 856
Premium grain pigskin leather. Patented
Grips® precurved design reduces hand
fatigue Premium grain pigskin leather.
Breathable Dimension 3™ directional
stretch mesh back. Anti vibration
padded reinforced palm patch. Slimfit™
shaped construction. Pigskin leather pull
tab for easy on and off. Leather
reinforced knuckle strap and fingertips.
Seamless wing thumb for comfort and
flexibility. Sold by the dozen pair.
856 Black back; sizes M, L - $210.60
SUG® 852
Select split cowhide leather. Patented Grips®
precurved design reduces hand fatigue.
Slimfit™ shaped construction. Breathable
Dimension 3™ directional stretch mesh back
in black or assorted colors. Seamless wing
thumb for comfort. Leather reinforced
knuckle strap and fingertips.
Sold by the dozen pair.
852K Black back; sizes M, L - $131.10
852 Assorted back colors; sizes M, L - $131.10
SUG® 846
Black premium grain cowhide leather. Patented
Grips® precurved design reduces hand fatigue.
Duraflex™ reinforced palm patch. OverWrap™
fingertips for extra wear. Xtrastretch™ terry
thumb for comfort. Recovery™ 4 way stretch
fabric finger inserts. Breathable Dimension 3™
directional stretch mesh back in black or
assorted colors. Sold by the dozen pair.
846K Black back; sizes M, L - $163.80
846 Assorted back colors; sizes M, L - $163.80
For complete product and ordering
information call 800-481-7450.
40