HYDRAC Snow plough

Transcription

HYDRAC Snow plough

Snow plough with
swinging suspension
Profiline parabolic snow plough
Snow plough “KL“
For narrow tractors and
small self propelled
vehicles.
Snow plough “LB“
Powerful medium range
plough. For medium
sized tractors, Unimog,
small trucks.
Snow plough “U“
Powerful TOP - range
plough. For bigger
tractors, Unimog, trucks.
Snow plough “SL“
Premium TOP professional plough
For big tractors, Unimog,
big trucks.
“CITYLINE“
Especially for operating
in municipal area
For extra soft and quiet
cleaning.
Snow plough “ES“
For medium sized tractors,
Unimog, trucks.
HYDRAC Snow plough - profiline
Signal flags
While overrunning an obstacle the affected
plough share makes different movements.
Due to the parabolic cam track the plough
share is flapping over the obstacle.
LED-Lights
Adjustable snow screen
(on demand)
The plough share is sliding up and also
making a movement into the back. This
guarants a very smooth driving.
Obstacles up to 20 cm height are no problem!
Adjustable springs
Reflecting stickers
DIN 30710
Optimised blade design
for excellent snow
cleaning performance
HYDRAC snow ploughs have a very
aggressive cutting angle of 28° for a perfect
cleaning result.
Due to the parabolic release system this
aggressive cutting angle is decreasing at the
obstacle in order not to dig out gully covers, etc.
Screwed bolts lubricated
Kerb protector screwed
Large parabolic cam track guided
by 8 lubricated bearings
Steel wear plate screwed
with cutting angle of 28°
The system provides an additional damping effect
2
Wheels (on demand)
Protected cylinder
arrangement
"V-Kombi"
Series “VP“
For medium sized tractors.
Stepless adjusting of 4
basical cleaning positions.
Snow blade
Snow plough “L“
Lightweight
For medium sized
tractors.
Snow blade “UNI“
For front- and rearhydraulic
linkage, front loaders,
fork lifts, construction
machines.
Snow blade “SK“
For compact tractors
with fronthydraulic,
frontloader.
Snow+dozer blade
Snow blade “MINI“
Snow blade “HSS“
For small sized self
For light works of snow
propelled vehicles. Also cleaning and soil levelling.
suitable for front loaders.
built for the toughest assignment
Best painting quality
trough powder coating
Lubricated pin joints
>> Quiet
>> Extra soft release
>> Especially for municipal area
Double acting
lifting cylinders
Parallel guidance
adjustable
Turnable screws
This damping bar is in between the steel
wear plate and the blade. This construction
reduces noice development because blade
and wearplate are not connected directly
any more with eachother. The system
provides also an additional damping effect.
EURO – Quick change plate.
Height adjustable
Plastic dead stop (screwed)
Parking device
Depth skids
Stepless height. Adjustment with
exchangable wear plate
3
Mechanical release device
Mechanical release device
An innovation in the municipal sector, the mechanical devices relief for snow plough.
A built-in mechanical snowplow equipment relief with two compression springs offers
many advantages:
• The snow plow is relieved - the front axle loaded higher
• Much better directional stability and driving safety is achieved
• The wear of the wear bar sinks
In the raised position, the chain is released, an adjustment
of the spring bias in clearing position can take place in this
position, by varying the chain position easy.
Chain for adjusting the prestress
in the clearing operation
Preloaded spring Plow is relieved
Optional equipment - Hydraulic release device
Hydraulic release device
For snow ploughs mounted on tractors.
The driver can adjust from inside the cabin a
certain pre-pressure in the hydraulic system.
This is releasing a part of the weight of the snow
plough and increases the weight on the front axle.
• increases driving safety
• better tracking of the steerint tires
• longer durability of the wearing plate
Easy operation via soft keys easily adjustable, switched on and off.
Seperate cleaning rail
Cleaning rail ON
4
Cleaning rail OFF
Release position
Cleaning rail benefits:
• Hydraulic lift lockable
• Releasing the slush bar,
• High quality rubber wear plate
fibre reinforced
Alternative wearing plate
Rubber wearing plate
fibre reinforced. Silent,
especially for clearing slush.
Combi-wear plate for extra
long durability. Made of high
grade steel, rubber and korund.
Combi-wear plate SN 36
combi-wear plate screwed
with cutting angle of 9°.
Clamp rail
For fast changing of
the wear plate
Snow screens
Snow screen - adjustable
Snow screen rubber
Protective shield made of steel
and plastic elements
More options
Rubber or pneumatic tires
Parking vehicle
For easy moving of the snow plough.
Hydraulic pivoting device
Stepless adjustment.
Tires for depth control
Crash barrier protector
electric-Hydraulic installation
Stepless adjustment from from the
driver´s cab. One controller necessary.
Ø360 mm.
The PU-wear plate protect against
damage coulters.
E.g. for cleaning the sidewalk
with an operator console, mounting
on the snow plough. E.g. for vehicles
without hydraulic devices.
5
Series KL
For mounting on municipal plate, or for front- or rear hydraulics.
For narrow tractors and small self propelled vehicles
Series KL
Profiline
Snow plough
Model
Total
width
Operating Blade height
width
No. of
blades
Weight
3-point hitch
Weight
Municipal plate
KL-I-140
1400 mm 1180 mm
900 mm
1
250 kg
235 kg
KL-I-160
1600 mm 1340 mm
900 mm
1
250 kg
285 kg
KL-I-180
1800 mm 1510 mm
900 mm
1
265 kg
295 kg
KL-II-200
2000 mm 1700 mm 850/900 mm
2
325 kg
410 kg
KL-II-220
2200 mm 1840 mm 850/900 mm
2
345 kg
430 kg
KL-II-240
2400 mm 2010 mm 850/900 mm
2
370 kg
455 kg
KL-II-260
2600 mm 2180 mm 850/900 mm
2
390 kg
475 kg
KL-II-280
2800 mm 2345 mm 850/900 mm
2
410 kg
495 kg
KL-II-300
3000 mm 2550 mm 850/900 mm
2
430 kg
515 kg
Basic equipment:
èHydraulic lateral adjustment ± 33°
èPivoted swivel compensation
èDepth skids, stepless adjustment
èParking device
èSpecial steel wear plate (150 x 10 mm)
èSignal flags
èLED - Lights
èPowder coated painting
Optional equipment:
èRubber or pneumatic tires (from KL-II-200; Ø200 mm)
èHydraulic pivoting device ± 14°
èParking vehicle
èSnow screen adjustable
èSnow screen rubber
èRubber wearing plate (190 x 40 mm)
6
3-point hitch
More blades - with Parabolic release facility !
Municipal plate
Series LB
For medium range self – propelled vehicles like tractors, Unimog or small truck
Model
Total
width
Operating
width
Blade height
No. of
blades
Weight
3-point hitch
Weight
Municipal plate
LB-II-260
2400 mm 1950 mm
900/1000 mm
2
460 kg
545 kg
LB-II-260
2600 mm 2180 mm
900/1000 mm
2
490 kg
575 kg
LB-II-280
2800 mm 2400 mm
900/1000 mm
2
520 kg
605 kg
LB-II-300
3000 mm 2550 mm
900/1000 mm
2
550 kg
635 kg
LB-III-280
2800 mm 2400 mm
900/1000 mm
3
540 kg
625 kg
LB-III-300
3000 mm 2550 mm
900/1000 mm
3
580 kg
665 kg
LB-III-320
3200 mm 2700 mm
900/1000 mm
3
610 kg
695 kg
Profiline
Snow plough
Series LB
Basic equipment:
èParking device
èSpecial steel wear plate, screwed (150 x 20 mm)
èSignal flags
èLED - Lights
Optional equipment:
èRubber or pneumatic tires (Ø300 mm)
èParking vehicle
èProtective shield made of steel and plastic elements
èRubber wearing plate (190 x 50 mm)
èCombi wearing plate (195 x 36 mm)
èMechanical release device (only with municipal plate)
3-point hitch
Municipal plate
7
Series U
For bigger tractors, Unimog and trucks
Series U-II / U-III / U-IV
Profiline
Snow plough
Model
Total
width
Operating
width
Blade height
No. of
blades
Weight
3-point hitch
Weight
Municipal plate
U-II-280-L
2800 mm
2400 mm 1000/1100 mm
2
715 kg
795 kg
U-II-300
3000 mm
2550 mm 1100/1200 mm
2
820 kg
900 kg
U-II-320
3200 mm
2700 mm 1100/1200 mm
2
845 kg
925 kg
U-III-280-L
2800 mm
2400 mm 1000/1100 mm
3
795 kg
875 kg
U-III-300-L
3000 mm
2550 mm 1000/1100 mm
3
815 kg
895 kg
U-III-320-L
3200 mm
2700 mm 1000/1100 mm
3
860 kg
940 kg
U-III-300
3000 mm
2550 mm 1100/1200 mm
3
870 kg
950 kg
U-III-320
3200 mm
2700 mm 1100/1200 mm
3
900 kg
980 kg
U-III-340
3400 mn
2850 mm 1100/1200 mm
3
930 kg
1010 kg
U-III-360
3600 mm
3000 mm 1100/1200 mm
3
960 kg
1040 kg
U-IV-340
3400 mm
2850 mm 1100/1200 mm
4
U-IV-360
3600 mm
3000 mm 1100/1200 mm
4
on request
1050 kg
1090 kg
Basic equipment:
More blades with Parabolic release facility !
èLongitudinal adjustable parallel guidance with ball-and-socket joints
èParking device
èSignal flags
èLED - Lights
Optional equipment:
èRubber or pneumatic tires (up to 40km/h=Ø300 mm; over 40km/h=Ø360 mm)
èParking vehicle
èRubber wearing plate fibre reinforced (190 x 50 mm)
èCrash barrier protector
èClamp rail
3-point hitch
8
Municipal plate
Series SL
For mounting on municipal plate.
For big tractors, Unimog and trucks
Model
Total
width
Operating
width
Blade height
No. of
blades
Weight
Municipal plate
SL-II-300
3000 mm 2550 mm 1200/1400 mm
2
1020 kg
SL-II-320
3200 mm 2700 mm 1200/1400 mm
2
1050 kg
SL-III-300 3000 mm 2550 mm 1200/1400 mm
3
1080 kg
2700 mm 1200/1400 mm
3
1120 kg
SL-III-340 3400 mm 2850 mm 1200/1400 mm
3
1150 kg
SL-III-360 3600 mm 3000 mm 1200/1400 mm
3
1180 kg
SL-III-380 3800 mm 3150 mm 1200/1400 mm
3
1210 kg
SL-IV-360 3600 mm 3000 mm 1200/1500 mm
4
1275 kg
SL-IV-380 3800 mm 3150 mm 1200/1500 mm
4
1305 kg
SL-IV-400 4000 mm 3300 mm 1200/1500 mm
4
1335 kg
SL-III-320 3200 mn
Profiline
Snow plough
Serie SL-II / SL-III / SL-IV
SL-V on request
Basic equipment:
èLongitudinal adjustable parallel guidance with ball-and-socket joints
èParking device
èSignal flags
èLED - Lights
Optional equipment:
èParking vehicle
èCrash barrier protector
èClamp rail
èMechanical release device
Municipal plate
9
Adaptor frame
For attachment to adaptor frame for tractors FENDT
without lifting cylinder and municipal plate.
Basic equipment:
èTilting device transverse
èParking device
èSteel wear plate, screwed (150 x 20 mm)
èSignal flags
èLED - Lights
Profiline
Snow plough
Optional equipment:
èRubber or pneumatic tires
(up to 40km/h=Ø300 mm; over 40km/h=Ø360 mm)
Available for following types of snow plough:
Series LB II
Series LB III
Series ES-III
Series U-II
Series U-III
Series U-III City-Line
Series SL-II
Series SL-III
Wheel loader attachment
Adapter plate for wheel loaders with stroke limitation instead of lifting cylinder
10
System
For soft and quiet cleaning. Extra comfortable driving and most sufficient noice reduction
available for following types of snow plough:
Series LB:
LB-II-260-C / LB-II-280-C / LB-II-300-C / LB-III-280-C / LB-III-300-C / LB-III-320-C
Series U:
U-III-280-C / U-III-300-C / U-III-320-C
Profiline
Snow plough
>> Quiet
>> Extra soft release
>> Especially for municipal area
This damping bar is in between the steel wear plate and the blade. This construction reduces
noice development beause blade and wearplate are not connected directly any more with
eachother. The system provides also an additional damping effect.
Municipal frame KOMBI
Only one bracket for attaching snow plough and front linkage
PATENTED
The municipal frame "Kombi" is equipped with the municipal quick change plate as
standard. This quick change plate can be removed very quickly and instead of it,
a front hydraulic can be mounted. A solid frame with rear axle support guarants
highest possible safety for the tractor.
Basic equipment:
èInterchange of snow plough and frontlinkage
èComing with quick-cha nge plate EURO size 3,
rear axle support and 4 hoses
4 Hydraulic hoses
Socket for light
Quick-change plate EURO
è
variable hight fixing
è
removeable
Rear axle support
Relocation transmission
Especially for Unimog.
1000 rpm, on request 540 rpm,
rotation to the right.
Rear axle support
Snow plough plate for front linkage
The front linkage arms can be removed
and the plate mounted in the arm-receiving
sockets.
11
Series ES
With swinging suspension. For mounting on municipal plate, or for front- or rear hydraulics.
For medium tractors, transporter, Unimog and trucks.
Series ES
Model
Total
width
Operating
width
Blade height
No. of
blades
Weight
Weight
3-point hitch Municipal plate
ES-III-280 2800 mm 2400 mm 1050 / 1150 mm
3
705 kg
790 kg
ES-III-300 3000 mm 2550 mm 1050 / 1150 mm
3
725 kg
810 kg
ES-III-320 3200 mm 2700 mm 1050 / 1150 mm
3
755 kg
840 kg
ES-IV-340 3400 mm 2850 mm 1050 / 1150 mm
4
--
860 kg
ES-IV-360 3600 mm 3000 mm 1050 / 1150 mm
4
--
885 kg
ed
The mically pric
econo ve solution
ati
altern
Ecswing
snow plough
Basic equipment:
èParking device
èSignal flags
èLED - Lights
cleaning positions
Optional equipment:
èRubber or pneumatic tires (up to 40km/h=Ø300 mm; over 40km/h=Ø360 mm)
èParking vehicle
èClamp rail
èSupport legs, height adjustable
plastic handlebar
1
Photo 1: Depth skids (basic equipment)
Photo 2: support legs (optional)
Adjustable springs
è
Particularly low noise with excellent damping properties of the plastic handlebar.
è
Particularly robust plastic handlebars guarantee an softly avoid backwards and upwards
if the snow plough is hitting an obstacle.
è
Get by on return springs the aggressiveness and the to evasion necessary force can be
Municipal plate
12
set individually, if the snow plough is hitting an obstacle.
3-point hitch
Adaptor frame
2
Series V-KOMBI
For mounting on municipal plate, or for front- or rear hydraulics
For medium range self – propelled vehicles like tractors or transporter.
Series VP
Model Total width Operating width
straight left/right, V- &
position copped position
Blade height
Pivoting
Weight
range per 3-point hitch
share
Weight
Municipal
plate
VP-240 2400 mm
2100 mm
800/1000 mm
35°
630 kg
710 kg
VP-280 2800 mm
2500 mm
800/1000 mm
35°
650 kg
730 kg
VP-320 3200 mm
2900 mm
800/1000 mm
35°
680 kg
750 kg
The standard model is equipped with an electro hydraulic valve which allows to change the shape. Therefore the V-Kombi plough
can be used in four positions. To be used in areas like footpaths, parks, parking lot, cities,...
Available positions:
Basic equipment:
right
left
èElectro hydraulic valve
èParking device
èSpecial steel wear plate with automatic release device
èLED - Lights
èSignal flags
„V“
copped
Optional equipment:
V-Kombi
straight
Electro hydraulic valve
13
Series L
Lightweight. For medium sized tractors.
Series L
Model
Total
width
Operating
width
Blade height
No. of
blades
Weight
Weight
3-point hitch Municipale plate
L-2001
2200 mm 1750 mm
900/1000 mm
1
390 kg
440 kg
L-2301
2500 mm 2000 mm
900/1000 mm
1
420 kg
470 kg
L-2501
2700 mm 2200 mm
900/1000 mm
1
455 kg
505 kg
L-2701
2900 mm 2400 mm
800/1000 mm
1
485 kg
535 kg
Snow blade
Basic equipment:
èOne blade with safety facility
èSafety valve
èHydraulic lift (only with municipale plate)
èPressure device
èTurnable special steel wear plate (for double durability)
rable
o
v
a
f
larly
u
c
i
t
r
pa
one blade - Snow plough unlatch to the front !
Optional equipment:
èLED - Lights
èMechanical release device (only for municipal plate)
3-point hitch
Municipale plate
Klink automatic: the blade latches when starting from the front.
Reset by springs.
14
Snowblade UNI
For mounting at front or rear hydraulic, front loader, forklifts and construction machines
Series UNI
Model
Total width
Operating
width
Blade height
Weight
3-point hitch
UNI-140*
1400 mm
1200 mm
750/860 mm
280 kg
UNI-160*
1600 mm
1420 mm
750/860 mm
300 kg
UNI-180*
1800 mm
1500 mm
750/860 mm
325 kg
UNI-200
2000 mm
1700 mm
750/860 mm
345 kg
UNI-230
2300 mm
2000 mm
750/860 mm
385 kg
UNI-250
2500 mm
2150 mm
750/860 mm
410 kg
UNI-270
2700 mm
2350 mm
750/860 mm
440 kg
UNI-290
2900 mm
2500 mm
750/860 mm
470 kg
UNI-310
3100 mm
2650 mm
750/860 mm
495 kg
* No rubber tires possible
Basic equipment:
èOne blade with safety facility
èSignal flags
Snow blade
Optional equipment:
èRubber or pneumatic tires (from UNI-200; Ø200 mm)
èLED - Lights
LED - Lights
Rubber tires
Different mounting possibilities:
Hoftracs, Construction: Growing support with height adjustment and
tilting device transverse
Loader: With tilting device transverse
forklift attachment
15
Snowblade SK
For mounting at front or rear hydraulic.
For compact tractors with fronthydraulic, frontloader or lift trucks.
Series SK
Model
Total
width
width
Weight
3-point hitch
SK-130
1300 mm 1130 mm
685/750 mm
185 kg
SK-150
1500 mm 1300 mm
685/750 mm
195 kg
SK-170
1700 mm 1475 mm
685/750 mm
205 kg
SK-190
1900 mm 1650 mm
685/750 mm
215 kg
SK-210
2100 mm 1825 mm
685/750 mm
225 kg
Basic equipment:
èSafety release device with spring
èCross-pendulum adjustment
Optional equipment:
Snow blade
èRubber or pneumatic tires (from SK-150; Ø160 mm)
èLED - Lights
3-point hitch
attachment for mounting
to quick coupling triangle
Complete equipment around the small tractor!
16
Snowblade Mini
For mounting at front or rear hydraulic.
For small self-propelled vehicles. Also possible to mount on a front loader.
Series Mini
Total
width
Operating
width
Blade height
Weight
3-point hitch
Mini-125 1250 mm
1100 mm
500/550 mm
60 kg
Mini-150 1500 mm
1300 mm
500/550 mm
72 kg
Mini-170 1700 mm
1475 mm
500/550 mm
91 kg
Optional equipment:
Basic equipment:
èSafety release device with spring
attachment for mounting
to quick coupling triangle
3-point hitch
Snow and dozer blade HSS
Snow blade
Model
For gentle snow clearing and levelling. Suitable for medium tractors.
Series HSS
Model
Total
width
Basic equipment:
width
Weight
3-point hitch
HSS-170-L
1700 mm 1450 mm
750 mm
145 kg
HSS-220-L
2200 mm 1900 mm
750 mm
165 kg
HSS-250-L
2500 mm 2150 mm
750 mm
185 kg
èDepth skids
èMechanical lateral adjustment ± 30°
èSteel wear plate, welded
17
Series “TN-R“
Disc spreader made
of INOX. For salt and grit.
For mounting on the rear
hydraulics of tractors.
Series “T-R“
Discspreader, self-loading
device. For salt and grit.
Series “TND-R“
Spreader with double
chamber system.
Series “CL“
Spreader Classic.
For salt and gritt.
Series “SL-R“
Self-loading spreader.
Disc spreader T-R
For salt and grit, self-loading model. For mounting on the rear hydraulics of tractors.
Series T-R
Model
Total
width
Capacity Weight
T-1000-R 2100 mm
1000 l
715 kg
T-1400-R 2100 mm
1400 l
810 kg
T-1700-R 2100 mm
1700 l
895 kg
Spreading
width
Spreading amount
of grit
Spreading
amount of salt
stepless adj.
1,5 - 8 m
stepless adj.
1,5 - 8 m
stepless adj.
1,5 - 8 m
stepless adj.
0 - 200 g/m²
stepless adj.
0 - 200 g/m²
stepless adj.
0 - 200 g/m²
stepless adj.
0 - 50 g/m²
stepless adj.
0 - 50 g/m²
stepless adj.
0 - 50 g/m²
Spreader
Please always mention the cathegory of the top link at the order! (CAT II or CAT III)
Support foot
Distributing plate
made of Inox
T-1400-R
On-the-move control
For fully automatic spread
adjustment from the driver´s
cab in relation to the speed.
18
Electric remote control
For adjustment of the spreading
amount from the driver´s cab.
Oil supply
Oil tank with attach pump and filter.
Camera with LCD-Display.
Spreader with self-loading device (on request)
Hopper made of hot galvanized steel
Basic equipment:
èDistributing plate made of Inox, Diameter 50 cm
èFully hydraulically driven
èManually adjustment of spreading direction and amount
èCentre of gravity closed to the tractor
èTurning direction invertible
èHydraulically components splash guarded
èSpreading protection made of rubber
èSupport foot
èLED - Lights
èPainting colour RAL 2011
LED - Lights
Spreading protection made of rubber
All hydraulic components are stored in the body
(not exposed to the elements and protected
against splashing water) and easily accessible.
èSelf-loading-equipment with double acting cylinders
èElectric remote control for adjustment of the spreading amount
èOn-the-move control for fully automatic spread adjustment from
the driver´s cab in relation to the speed. Connected on the
signal-plug socket of the tractor.
èElectrical spreading adjustment (only with electric remote control or
on-the-move control)
èLED floodlight
èLED beacon light (on / off switching via operating panel)
èCamera with LCD display
èOil supply (oil tank with attach pump and filter)
èAdapter and software for readout the scattering datas by an usb flash drive
è GPS - scattering data recording to on-the-move-control
èTarpaulin hopper cover
Hopper made of hot galvanized charging auger and agitator >> significant longer durability!
Galvanized agitator
for breaking up the grit.
Hopper made of galvanized
steel (4mm)
Simply filling of the silo
19
Spreader
Optional equipment:
Disc spreader TN-R
For salt and grit. For mounting on the rear hydraulics of tractors.
Single chamber system
Series TN-R (made of INOX)
Model
Total
width
TN-1000-R 2100 mm
Capacity Weight
1000 l
TN-1400-R 2100 mm
1400 l
TN-1700-R 2100 mm
1700 l
Spreading
Spreading
Spreading
width
amount of grit amount of salt
stepless adj.
1,5 - 8 m
stepless adj.
440 kg
1,5 - 8 m
stepless adj.
465 kg
1,5 - 8 m
415 kg
stepless adj.
0 - 200 g/m²
stepless adj.
0 - 200 g/m²
stepless adj.
0 - 200 g/m²
stepless adj.
0 - 50 g/m²
stepless adj.
0 - 50 g/m²
stepless adj.
0 - 50 g/m²
Tarpaulin hopper cover foldable
(basic equipment)
Spreader
Basic equipment for TN-R and TND-R:
è Galvanized agitator (contrary to clumping and to act
to ensure the descent of salt and grit)
è Fully hydraulically driven
è Turning direction of charging auger and agitator invertible
by pushing a button
è Hydraulically components splash guarded
è Proportional hydraulic valves with dirt filter
è Manually adjustment of spreading width and quantity
èMechanical or electrical spreading adjustment
èCentre of gravity closed to the tractor
èDistributing plate made of Inox, Diameter 45 cm
è Spreading protection made of rubber
è Hot galvanized safety grid in the hopper
èTarpaulin hopper cover foldable
è Support feet
èLED - Lights
è Reflecting stickers (red/white)
è Painting colour RAL 2011
LED - Lights
Support feet
Hydraulically components splash guarded
Symbol picture TND-R
On-the-move control
20
For adjustment of the spreading
amount from the driver´s cab
Oil supply
Oil tank with attach pump and filter.
Camera with LCD-Display.
Spreader TND-R with double chamber system
Double chamber system
Series TND-R (made of INOX)
Model
Total
width
TND-1000-R
2100 mm
1000 l
TND-1400-R
2100 mm
1400 l
TND-1700-R
2100 mm
1700 l
Hopper made of INOX
Capacity Weight
Spreading
width
stepless adj.
1,5 - 8 m
stepless adj.
555 kg
1,5 - 8 m
stepless adj.
583 kg
1,5 - 8 m
500 kg
Spreading
amount of grit
Spreading
amount of salt
stepless adj.
0 - 200 g/m²
stepless adj.
0 - 200 g/m²
stepless adj.
0 - 200 g/m²
stepless adj.
0 - 50 g/m²
stepless adj.
0 - 50 g/m²
stepless adj.
0 - 50 g/m²
TND-R: dual chamber system (distribution 50/50),
for individual adjustment of either salt or crushed
stones (grit) or for spreading both at once.
Distribution 60/40 on request.
Optional equipment for TN-R and TND-R:
Spreading protection
made of rubber
Spreader
èOn-the-move control for fully automatic spread adjustment from the driver´s cab
in relation to the speed. Connected on the signal-plug socket of the tractor.
èElectric remote contol for adjustment of the spreading amount from the driver´s cab
èElectrical spreading adjustment (only with electric remote control or
on-the-move control)
è LED floodlight
è Camera with LCD display
èOil supply (oil tank with attach pump and filter)
è Safety grid made of high quality steel
è LED beacon light (on / off switching via operating panel)
èAdapter and software for readout the scattering datas by an usb flash drive
è GPS - scattering data recording to on-the-move-control
Hopper made of INOX 4 mm (stainless steel) hot galvanized charging auger and agitator >> significant longer durability!
Hot galvanized safety grid
Tarpaulin hopper
cover foldable
Stepless spreading adjustment Galvanized agitator
for breaking up the grit.
21
Classic spreader CL
Series CL
Model
Dimensions
Capacity Weight Spreading
Spreading
Spreading
width
amount of grit amount of salt
CL-550 100/120/95 cm
550 l
145 kg
1,5 - 6 m
0 - 200 g/m²
0 - 50 g/m²
CL-750 100/120/115 cm
750 l
178 kg
1,5 - 6 m
0 - 200 g/m²
0 - 50 g/m²
CL-950 100/120/135 cm
950 l
190 kg
1,5 - 6 m
0 - 200 g/m²
0 - 50 g/m²
Basic equipment:
è Hopper and distributing plate made of Inox
è Power transpmission by pto-shaft (540 rpm)
èPto-shaft
è Manually adjustment of spreading direction and amount
è Strong frame 6 mm, hot galvanized and powder coated, painting colour RAL 2011
è Hot galvanized safety grid in the hopper
è 3-point hitch mounting, CAT I & II
èAgitator
èLights
è Tarpaulin hopper cover
è Rear reflector
è Reflecting stickers
Spreader
Optional equipment:
è Spreading width and quantity can be adjusted hydraulically from inside the cabine
è On-the-move control for fully automatic spread adjustment from the driver´s cab in
relation to the speed. Connected on the signal-plug socket of the tractor.
è LED light for controling of the spreading activity (available only for the electrical spreaders)
è Outdoor temperature sensor (only with on-the-move control)
On-the-move control
22
3 holes cuarantee constant
material flow
Agitator
Spreading width from 1,5 - 6 m
adjustable spreading direction:
left - middle - right
Hot galvanized safety grid
Self-loading spreader SL-R
Spreader with self-loading device. For mounting on the rear hydraulics of tractors.
Series SL-R
Type
Capacity Operating Min. recommended Weight
width
tractor power
SL-1000-R
200 l
1000 mm
15 hp
180 kg
SL-1200-R
380 l
1120 mm
40 hp
280 kg
SL-1800-R
850 l
1700 mm
70 hp
385 kg
SL-2100-R
1100 l
2000 mm
85 hp
490 kg
SL-2300-R
1500 l
2200 mm
100 hp
595 kg
SL-1000-R
Basic equipment:
èDriven by hydraulic motor
èMounting on the rear hydraulics of tractors.
èSelf-loading container with stepless adjustable distributing rotor
èHydraulic toplink
èPainting colour RAL 2011
All models have agitator as basic equipment.
Spreader
Please always mention the cathegory of the top link at the order! (CAT II or CAT III)
Optional equipment:
èOn-the-move control for fully automatic stepless adjustment of the spreading
amount, depending of the driving speed. Connected on the signal-plug
socket of the tractor.
è Electric remote contol for adjustment of the spreading amount from the
driver´s cab (only from SL-1200-R)
è Oil supply (oil tank with attach pump and filter)
è Tarpaulin hopper cover
Demands on the tractor:
On-the-move control
For adjustment of the
spreading amount from
inside of the cabine.
Oil supply
Oil tank with attach pump
and filter.
è1 double acting hydraulic circuit
for the top link
è1 single acting or double acting
hydr. circuit with permanent oil flow
position + oil return without pressure
23
Snow blower SF
With extra strong 2-shaft gearbox for 540 rpm left and 1000 rpm right
Series SF
Model
Auger
Operating Operating
width
height Quantity Diameter
Rotor
Diameter
Capacity
throw
Min. recommended
distance
tractor power
Weight
SF-200-HD 2000 mm
770 mm
2
340 mm
680 mm
10 - 12 m³/min
5 - 40 m
50 hp
650 kg
SF-220-HD 2200 mm
770 mm
2
340 mm
680 mm
12 - 16 m³/min
5 - 40 m
70 hp
675 kg
SF-240-HD 2400 mm
770 mm
2
340 mm
680 mm
12 - 16 m³/min
5 - 40 m
80 hp
700 kg
SF-245-HD
2450 mn
900 mm
2
440/340 mm 800 mm
14 - 18 m³/min
5 - 40 m
100 hp
1100 kg
SF-260-HD 2600 mm
1100 mm
2
500/340 mm 900 mm
16 - 22 m³/min
5 - 40 m
120 hp
1460 kg
Basic equipment:
èPto shaft
èFor mounting at front- or rear hydraulic
èGear box with 2 pto shafts (540 rpm and 1000 rpm)
èExhaust pipe hydraulically turnable
èHydraulically adjustment of throwing flap
Optional equipment:
èExtension of the exhaust pipe with
hydraulically adjustable throwing flap
1000 rpm right
540 rpm left
Gear box with 2 pto shafts
Snow blower
HYDRAC – Snow blowers are working in a two-step-process.
The horizontal positioned augers are cutting the snow and deliver it to the center of the machine where the powerful exhaust
turbine is located. Through this exhaust turbine the snow is blown out.
24
Snow blower SFT
With extra strong 2-shaft gearbox for 540 rpm left and 1000 rpm right
Series SFT-Profi
Model
SFT-250-Profi
Auger
Operating Operating
width
height Quantity Diameter
Rotor
Diameter
Capacity
throw
distance
Min. recommended
tractor power
Weight
2550 mm
800 mm
15 - 25 m³/min
5 - 45 m
150 hp
1170 kg
1100 mm
1
850 mm
Basic equipment:
Snow blower
èPto shaft
èFor mounting at front- or rear hydraulic
èGear box with 2 pto shafts (540 rpm and 1000 rpm)
èExhaust pipe hydraulically turnable
èHydraulically adjustment of throwing flap
25
Hedge Cutter
For mounting on the front- or rear hydraulics of tractors.
Serie BM
Model
Mower width
Boom reach
Weight
Min. recommended Oil capacity FTO speed
tractor power
rpm
Blades "Y"
BM-3208 Eco
80 cm
3,20 m
330 kg
20 hp
58 l
540 min
40
BM-5110 Eco
100 cm
4,80 m
930 kg
50 hp
137 l
540 min
48
BM-6012 Eco
120 cm
6,00 m
1160 kg
70 hp
137 l
540 min
52
BM-6112 Profi
120 cm
6,10 m
1175 kg
80 hp
210 l
540 min
48
BM-6212 V
120 cm
5,50 - 6,20 m
1295 kg
100 hp
210 l
540 min
48
BM-7012 Tele
120 cm
6,50 - 7,20 m
1510 kg
120 hp
210 l
540 min
48
BM-8012 Tele
120 cm
8,10 m
1540 kg
120 hp
210 l
540 min
48
BM-5010 FRONT
100 cm
4,90 m
890 kg
80 hp
130 l
1000 min
48
HYDRAC – hedge cutter
Consisting of a hydraulically powered and adjustable cutting head with replaceable
blades, based on mowing to a depth role. The hydraulically operated boom allows
you to work in any position. By a compressed gas accumulator, a hydraulic pivoting
of the arm is guaranteed, when it collides with an obstacle.
The Operation is carried out of Bowden cables from the drivers cabine or on request
with a proportional control with joystick (standard for BM-5010-F).
Basic equipment:
Hedge Cutter
èMower head
èControl pannel with Bowden cable
èAdaptation plate for different head
èHydraulical overload protection (only on BM 3208 Eco=mechanical)
èSupport roller for depth control
èRotor shaft with 2 twisted rows of knife holders
èFront and backguard made of wear resistant rubber
èReplacable side skids
èSide rods
èFloating position
BM-6012 Eco
26
changeable "Y" blades
Transport position
Optional equipment:
èBranch cutter HS15
èBranch cutter AS13 èBranch cutter AS22 èRotating brushcutter èBlower Gb31 Brunch cutter HS15
Control pannel with Bowden cable
cutting width 1,50 m maximum diameter of branch 3 cm
cutting width 2,10 m maximum diameter of saw blades 70 cm, 4 saw blades 320 kg
for clean roads (1x single acting control necessary)
Blower Gb 31
Brunch cutter
Proportional control joystick
Spiral rotor with two spiral rows
BM-6212 V - laterally cutting, tiltable forward
BM-5010 F - Front
BM-5010 F - Front
Hedge Cutter
Rotating brushcutter
27
Excavator
3-point mounting.
Basic equipment:
Excavator
Model
Width of the Digging Lifting
standard bucket depth height
Range
Weight Recommended
tractor power
Mini 190
25 cm
2,15 m 1,70 m 3,00 m 400 kg
12 - 40 hp
Junior 250
30 cm
2,70 m 2,20 m 3,50 m 660 kg
40 - 80 hp
Standard 290
40 cm
3,05 m 2,55 m 3,75 m 800 kg
60- 130 hp
èAttachable oil pump (PTO) with pump
èStepless lateral adjustment
èHydraulical support legs left and right
èStandard bucket
è3-point mounting
èStable locking rails (for Junior 250 and
Standard 290 with extra solid support legs)
èBushings in all bearings
èHardened pins
Profiline
Schneeschilder
If the tractor is equipped with control hydraulic, it‘s necessary to have locking rails
for the top link!
HYDRAC Excavators – powerful and solid
Due to the special steel in combination with the clever design the excavator has excellent
power-to-weight ratio. The stepless lateral adjustment and the enormous power of this
excavator are ensuring a perfect performance. Various tools are making this machine to a real
multi-purpouse specialist.
The tilting cylinders are equipped with a shock absorber. Which allows a very smooth operating.
Dreipunkt
Schneeschilder
Ecoline
Schneepflüge
Extra wide buchet 1,20 m
Mini 190
Böschungsmäher
Schneefräsen
Streugeräte
Our production facility
Conical bucket
from 20 to 70 cm
Junior 250
Standard bucket
from 25 to 60 cm
Solid base for maximum performance – to secure our leading postion
Over 45 years of experience in research and development, design and construction,
permanent innovation and the use of state of the art EDP and CAD/CAM technology
are ensuring the leading position. A quality control system following to ISO 9001
provides best quality and production efficiency. Today HYDRAC is known as a
hightech production facility for agricultural- and municipal equipment with around
120 employees. More than 6500 machines are annually produced. HYDRAC is
very keen on the permanent education and a high sense of responsibility of its
employees, who are the base for the permanent progress.
The HYDRAC production facilities in Upper Austria - the heart of Austria’s main
industrial region – have been expanded several times within the lastyears. Latest
CNC machines and robots ensure an economic production.
Product range: Snow ploughs, winter service and municipal equipment, frontend loader, front linkage and front power take off.
Perfect service: Extensive consultation and quick customer service is at the top of HYDRAC’s priorities!
An additional plus: Special wishes can be fulfilled on short notice!
Video clips: www.youtube.com/user/HydracAustria
Dealer:
HYDRAC Pühringer GmbH&CoKG | Kommunal- und Landtechnik
AT-4523 Sierning | Primitstraße 4 | Tel +43-7259-6000-0
Fax +43-7259-6000-40 | [email protected] | www.hydrac.com
Errors and modifications reserved. Information subject to change without prior notice. | 40800707 – 11/12 | © HYDRAC 2012

HYDRAC Snow plough

Transcription

Similar documents

magazin - Weidemann

Rod Seals - Trelleborg Sealing Solutions

Prospekt 1 Behandl_Liegen_engl.qxd

Karat Catalogue ()

Link to - Ottawa Pavilion