View Auction Brochure

UNUSED Since
Refurbished
Rig #88 IDECO H-725 – YD9
5% Total Internet Bidding Fee
Jim Richie - TX Lic# 13742 • James Dyess - TX Lic# 8550 • A 2.5% admin fee will be charged on all onsite purchases
Rig #169 AMERI-TECH Crew Quarters – YD1
Rig #169 C.EMSCO D-2 Drawworks – YD1
TYLER, TEXAS
WEDNESDAY, AUGUST 6th, 2014 • 9:00 A.M. (CDT)
Rig #151 G.DENVER PZ-8 – YD1
Rig #161 CAT SR-4 210KW Gen House – YD2
@ Holiday Inn - South Broadway - Visit Kruse Website for Special Room Rate
(9) DRILLING RIGS • (10) 130-BBL VACUUM TRAILERS
DRILL PIPE • DRILLING & WELL SERVICE COMPONENTS
2,594 H
HYUNDAI Gen / MTU12V - YD6
Rig #54 142'H 780,000# SHL Mast – YD6
Rig #151 MID-CONT. U-36A – YD1
ours
W!
Like NE
Rig #169 C.EMSCO F-800 w/3508 Eng – YD1
Rig #54 NATIONAL 110-M 1500 HP – YD6
FOR MORE INFO – Call 432-563-2005, View Online at www.kruseenergy.com
or Call Larry Mitchell (903-237-8916) or George Rich (409-790-9315)
Nice!
Rig #107 BDW 450 – YD1
YARD #1 - ODESSA, TX
Rig #151 CAT SR4B 320KW Gen House – YD1
DIRECTIONS: 2500 West 87th St, Odessa, TX 79764. From the intersection
of I-20 (Exit #121) & 338 Loop in Odessa, go north on 338 Loop for 2.3 miles,
turn left on Hwy 191/42nd St. and go 4.9 miles and turn right onto N. County
Road West and travel 3.3 miles North, then turn left on Hillmont Rd and travel
for .5 miles, then turn left on Beeson Ave. (look for Price Petroleum sign on
right) and travel .3 miles then veer left and turn right into yard (Patterson Yard).
PREVIEW beginning, July 30, 2014 8am-5pm, Monday-Friday. CHECKOUT
thru August 17, 2014, 8am-5pm, Monday-Friday.
CONTACT: Mike Loya @ 432-664-5527.
(NOTE: All Yard #1 Engines Were Pickled W/VCI Anti-Corrosive Fluid When
Rigs Were Stacked, With The Exception Of Rig #169 Drawworks Engines.)
RIG #151
MID-CONT. U-36A S/D Drawworks, PARMAC V-80 Brake p/b (2) CAT 3406A
Engs w/TWIN DISC 11524-TC Torques • TRI-STATE 131’ H Mast (Note: 2010
SUPERIOR CAT III INSPECTION) & TRI-STATE 10’H Substructure
w/MAXI-RIDER Personnel Lift 5’H Pony Subs • (2) CAT SR4B 320 KW Gens,
Ea p/b CAT C-15 Eng, SULLIVAN Palatek 30DG Screw Type Air Compressor •
(2) G.DENVER PZ-8 Triplex Pumps, Ea p/b Cat 379 Eng • OIME 27-1/2” Rotary Table • Toolpusher’s House • Crew Quarters • Dog House • Parts House •
Change House • Water Tank/Parts House Combo • Misc. Handling Tools
RIG #169
CONT.EMSCO D-2 S/D Drawworks, PARMAC 342 Brake p/b (2) CAT 379
Engs w/TWIN DISC 11524-TC Torques, (2) Air Compressors • DSI 131’H Mast,
DSI 12’H x 45’L Substructure, MAXI-RIDER Personnel Lift • (2) CAT SR4B 320
KW Gens, Ea p/b CAT 3406 Eng, SULLIVAN Palatek 30DG Screw-Type Air
Compressor • (2) CONT.EMSCO F-800 Triplex Pumps, Ea p/b CAT 3508 Eng
w/NATIONAL C-300-64 Torques • SKYTOP-BREWSTER 250-Ton Block/Hook
Combo • G. DENVER RT22.5 22-1/2” Rotary Table • AMERI-TECH Crew
Quarters • 2-Tank Mud System w/Crimped Wall Tanks • Water Tank • Doghouse • Parts & Lube House Combo • Air Hoist & Misc Handling Tools
RIG #107
BDW 450 S/D Drawworks, PARMAC 341 Brake p/b (2) CAT 3406 Engs w/NATIONAL C-195-64 Torques, (2) Air Compressors • SUPERIOR 110’H
320,000#SHL Mast, 12’H x 40’L Substructure • (2) LEROY SOMER 350 KW
Gens, Ea p/b CAT C-15 Eng, SULLIVAN Palatek 30D7 Screw-Type Air Com-
unks
(12) B
500-Bbl Water Tank – YD1
Rig #151 131’H Mast w/MAXI RIDER – YD1
Rig #466 NATIONAL 610 – YD1
pressors, QUINCY 5120 Air Compressor • McKISSICK 868 250-Ton
Block/Hook Combo • NATIONAL 17-1/2” Rotary Table • 5000# Choke Manifold
• 3-Tank Mud System w/Crimped Wall Tanks • (2) Water Tanks • 12’W x 48’L
Crew Quarters • Doghouse • Change/Parts House Combo • (3) I.RAND Air
Hoists & Misc Handling Tools
RIG #466
NATIONAL 610 S/D Drawworks, McKINNEY 281 Brake p/b (2) CAT C-15 Engs
• SUPERIOR 131’H 428,000#SHL Mast & 12’H Substructure • (2) CAT SR4
210 KW Gens, Ea p/b CAT 3406 Eng, SULLIVAN Palatek 30DG Screw-Type
Air Compressors • (2) IDECO MM700 Duplex Pumps, Ea p/b CAT 379 Eng •
PYRAMID 350-Ton Block/Hook Combo • IDECO 27-1/2” Rotary Table • Crew
Quarters • Toolpusher’s House • Doghouse • Water Tanks
YARD #2 - SAN ANGELO, TX
DIRECTIONS: 4105 South Chadbourne St, San Angelo, TX 76903. From intersection of Hwy 67 & Hwy 277/87 in San Angelo, TX, Go South on Hwy 277/87
for 1.5 miles to FM 388/W. Ave L. Turn left (travel East) on FM 388/W. Ave L to
travel .4 mile to S. Chadbourne St, Turn right (South) and travel 2 miles to Patterson-UTI yard on the right. PREVIEW beginning, July 30, 3014, 8 am-5 pm,
including weekends. CHECKOUT thru August 17, 2014, 8 am-5 pm, including
weekends. CONTACT: Benny Hughes @ 432-413-8840.
(NOTE: All Yard #2 Engines Were Pickled W/VCI Anti-Corrosive
Fluid When Rigs Were Stacked)
RIG #161
G.DENVER 500 S/D Drawworks, PARMAC 341 Brake p/b (2) CAT 3406 Engs
w/NATIONAL C-195-164 Torques, Air Compressor • SUPERIOR 110’H
320,000# SHL Mast, 12’H x 42’L Substructure • MAXI-RIDER Personnel Lift •
(2) CAT SR4 210 KW Gens, Ea p/b CAT 3406 Eng, SULLIVAN Palatek 30DG
Screw-Type Air Compressor • (2) CONT.EMSCO F-800 Triplex Pumps, Ea p/b
CAT 3408 Eng w/NATIONAL C-300-64 Torques • CONT.EMSCO RA36 250Ton Block/Hook Combo • G.DENVER RT22.5 22-1/2” Rotary Table • 2-Tank
Mud System w/Crimped Wall Tanks • (2) Water Tanks • Doghouse • Parts
House • I.RAND 4000# & (2) 2500# Air Hoists • Pipe Spinner • Kelly Spinner •
Misc Handling Tools
YARD #3 - HAUGHTON, LA
DIRECTIONS: From Shreveport, LA go east on I-20 to exit 33. At the stop sign
(LA157) turn right & go one block to traffic light. Turn left on Hwy LA3227. Go
Rig #151 12'W x 48'L Crew House – YD1
2.0 miles to stop sign. Turn right on LA164 & go 0.9 miles. Turn right on
LA614 (Stallion Yard on east side of 164) & go 0.8 miles to entrance on left.
Turn and cross RR tracks into Blazer Construction Rock yard. PREVIEW beginning July 30, 2014, 8am-5pm, including weekends. CHECKOUT thru August 17, 2014, 8am-5pm, including weekends. CONTACT: Charlie Washburn
@ 903-985-0429.
(NOTE: All Yard #3 Engines Were Pickled W/VCI Anti-Corrosive
Fluid When Rigs Were Stacked)
RIG #88
IDECO H725 S/D Drawworks, PARMAC V-80 Brake p/b (2) CAT C15 Engs, OILWORKS 195-100 Torques (NOTE: This Drwwks Package was Completely Refurbished & Never Used. This is Rig #88 Drwwks, but is located in Tyler, TX
Yard #9, See Directions) • SUPERIOR 136’H 425,000# SHL Mast, DSI 16’H
Substructure • (2) CAT SR4 210 KW Gens, Ea p/b CAT 3306 Eng • (2) OILWELL
A-850PT Triplex Pumps, Ea p/b CAT 3508 Eng w/NAT’L C-300-64 Torque •
McKISSICK 868 250-Ton Block/Hook Combo • NATIONAL 17-1/2” Rotary Table •
KOOMEY 5-Station Closing Unit • 2-Tank Mud System w/Crimped Wall Tanks •
Doghouse • Fuel Tank • Water Pump System (Duck Pond) • (3) I.RAND Air Hoists
DRILLING COMPONENTS
NATIONAL 610 S/D Drwwk w/PARMAC 281 Brake • (2) OILWELL A-1100 Triplex
Pumps • IDECO UTB-260 Block/Hook • OILWELL 360-Ton Block/BJ 5350 Hook •
(5) Utility Houses Ea w/(2) CAT SR-4 / 3406 Gen Sets • I.RAND HUL40 Air Hoist •
(4) INT'L Kelly Spinners • (2) OILWORKS & (2) MATHEY Wireline Units •
WEATHERFORD Pipe Spinner • (2) PARMAC 342 Brakes
YARD #4 - GILLIAM, LA (HOBBS WELDING)
DIRECTIONS: 13331 Hwy 71, Gilliam, LA 71029. North of Shreveport, LA,
travel N. Loop 220 to exit 7B, Hwy 71, 1, I-49N. Travel Hwy 1/I-49N for 4.1
miles to the intersection of I-49N. Exit to I-49N & go approx 20 miles to the intersection of Hwy 71 Exit 23A & go south on Hwy 71 for 1.6 miles to Hobbs
Welding on the left. PREVIEW beginning, July 30, 2014, 8am-5pm, including
weekends. CHECKOUT thru August 17, 2014, 8am-5pm, including weekends.
CONTACT: TJ Washburn @ 903-985-0131.
(NOTE: All Yard #4 Engines Were Pickled W/VCI Anti-Corrosive Fluid
When Rigs Were Stacked)
Nice!
2
(1 of 5) Gen Houses – YD3
Rig #151 Top Doghouse – YD1
Nice!
TOWNSEND TM-20-6 Dbl BOP – YD6
(1 of 2) 200-Bbl Water Tanks – YD6
Rig #466 BJ 250-Ton Block/Hook Combo – YD1
RIG #84
IDECO H725 S/D Drawworks, PARMAC V80 Brake, Driller’s Air Control Panel, 2-Eng In-Line Compound, w/o Power • DSI 136’H
650,000# SHL Mast, 16’H Substructure • (2) CAT SR4B 310 KW Gens, Ea p/b CAT 3406 Eng • (2) G. DENVER PZ-9 Triplex
Pumps, Ea p/b CAT 398 Eng • IDECO 360 Traveling Block w/IDECO 360 Hook • IDECO 23E 23” Rotary Table • C. EMSCO
LB300 300-Ton Swivel • HYDRIL GK 11” 5M Annular BOP • SHAFFER 11” 5M Dbl BOP • 5-Station Closing Unit • 5000# Choke
Manifold • 2-Tank Mud System w/Crimped Wall Tanks • Water Tank • Fuel Tank • Toolpusher’s House • Top Doghouse
YARD #5 - HENDERSON, TX
DIRECTIONS: 3146 FM 2276 N, Henderson, TX, 75652. From the North side of Henderson, TX at the intersection of
Hwy 259 & Hwy 64 go North on 259 for 4 miles to FM 2276, turn left & follow FM 2276 until you cross the railroad tracks.
The first gate on the left. The sign says Odessa Pumps. PREVIEW beginning, August 1, 2014, 8am-5pm, including weekends. CHECKOUT thru August 17, 2014, 8am-5pm, including weekends. CONTACT: Dick Turner @ 903-721-0283.
VACUUM TRAILERS - FORKLIFT
DRILLING & WELL SERVICE COMPONENTS
(2) CAT 375KW Gens p/b CAT 3408 Engs • HYDRIL 11” 5000# Sgl Ram BOP (UNUSED) • SHAFFER MNL 7”
Dbl BOP • (2) TOWNSEND 7-1/16” 5000# Sgl BOPs • EMSCO 17-1/2” Rotary Table • (2) BREWSTER 22-1/2”
Rotary Tables • (2) BAASH-ROSS 5-1/4” Hex Kelly Bushings • (2) Crimped Wall Mud Tanks Ea w/(2) Compartments • Water Tanks • DETROIT 3-71 Eng w/PTO • WORTHINGTON Water Pump w/DETROIT 4-71 Eng •
G.DENVER Water Pump p/b WAUKESHA 310 Eng • G.DENVER ADL Air Compressor • 4 Wireline Units • (6) 85/8” Wellheads • (3) PTO Winches • (11) Centrifugal Pumps • IDECO T-1000 Fluid Module (NEW) • (22) Various
Right Angle Drives • (4) DETROIT Series 60 Engine Cores • 200-Bbl Fiberglass Tank, On S/A Trailer • ALLISON
CLT-750 Trans • PARMAC 122 Brake • (3) G.DENVER PA-8 Gear End Cases
11611 County Road 128 West
Odessa, TX 79765
www.kruseenergy.com
AUCTION INFORMATION
Date & Time: Wednesday, August 6th, 2014 @ 9:00AM
Auction Location & Crew Headquarters:
Holiday Inn South Broadway • 903-561-5800 (Tel) • 903-561-9916 (Fax)
5701 S. Broadway • Tyler, TX 75703 • Visit Kruse Website for Special Room Rate
Alternate Hotels:
Comfort Suites • 903-534-0999 • 303 Rieck Rd • Tyler, TX
Sleep Inn & Suites • 903-581-8646 • 5555 Donnybrook Ave • Tyler, TX
Airport: Tyler Pounds Field International Airport (4 Miles West of Loop 323 on
Hwy 64) • Served by American Airlines & United Airlines
TERMS OF SALE
TAX NOTICE
Purchasers who are tax exempt MUST provide a copy of their SALES and USE
TAX PERMIT at the time of BIDDER REGISTRATION. The company Federal
Identification Number, or for a proprietorship, the purchaser’s social security number will also be required at registration.
BRING A COPY OF YOUR SALES TAX PERMIT!
YARD #6 - JENA, LA
DIRECTIONS: 21207 Hwy 8 West, Jena, LA 71342. From Alexandria, LA go North on Hwy 165, turn right on Hwy
8, go 20.8 miles to Justiss Oil Co. on right. PREVIEW beginning July, 30, 2014, 7am-3:30pm, Mon-Fri. CHECKOUT thru August 17, 2014, 7am-3:30pm, Monday-Friday. CONTACT: Ronnie Lowe @ 318-312-0622.
RIG #54
NATIONAL 110-M S/D Drawworks, PARKERSBURG 48” Brake, C. EMSCO CT-5 2-Eng In-Line Compound w/C.
EMSCO Torques, Air Clutches w/(2) G. DENVER Air Compressor, Mtd on (3) Skids (No Power) • CUSTOM RIG
WORK 142’H 780,000# SHL Mast & 21’H Substructure w/10’H Pony Sub • NATIONAL P500 Swivel w/INTERNATIONAL K-6 Kelly Spinner • G. DENVER 400-Ton Block w/BJ Dynaflex 500-Ton Hook • Doghouse • (2) Suitcases
OILWELL 20-1/2" Rotary Table – YD8
1-432-563-2005
Fax: 432-563-7929
All bidders must register and provide proper identification. All purchases must be
PAID IN FULL on sale date before equipment will be released. Acceptable forms
of payment include Cash, Cashier’s Check, Travelers Checks, Wire Transfer or
Personal/Company Check Accompanied by BANK LETTER OF GUARANTEE. No
drafts will be accepted. All printed information regarding this sale is merely a guide,
subject to change, and neither the auction Company, Sellers, nor Publishers shall
be liable for any errors in this brochure. All items will be sold “AS IS, WHERE IS,
WITH ALL FAULTS” and without guarantee or warranty of any kind, either expressed or implied. A 2.5% Admin Fee will be charged on all onsite purchases.
A 5% Total Internet Bidding Fee will be charged on all Internet purchases.
(10) 130-Bbl Vacuum Trailers • NISSAN 9000# Forklift p/b 6-Cyl Diesel Eng • 1993 JIM’S T/A Gooseneck
Dovetail Equipment Trailer
Rig #54 G.DENVER 400-Ton Block – YD6
NATIONAL 110 D/D – YD6
3
For Private Sales or Appraisals
Contact Us or Kruse Asset Management at 800-952-1973
ABSENTEE BIDS
Absentee Bids Only Allowed with 50% DEPOSIT OF MAXIMUM BID and WRITTEN INSTRUCTIONS
to Odessa Office 24 HOURS PRIOR TO AUCTION, NO EXCEPTIONS.
Foreign Buyer Notice: You must be pre approved 48 hours before auction to register to bid.
For further information contact [email protected]
(10) 130-Bbl Vacuum Trailers – YD5
rs
8 486 H o u
JIM RICHIE
918-289-1482
DAVID LONG
432-661-6272
GARY BERGMAN
210-410-7489
SCOTT FELKER
623-980-5546
GARY STOUT
405-203-0311
PAT PERRYMAN
210-862-2964
JAMES DYESS
940-328-2882
CHARLES WAMPLER
303-625-3088
ERIC DYESS
940-452-4132
STEVE TAYLOR
432-448-0406
LARRY MITCHELL
903-237-8916
GEORGE RICH
409-790-9315
N.O.V. IDS350P Top Drive – YD6
Rig #161 C.EMSCO F-800 Triplex Pump – YD2
PRESORTED
FIRST CLASS MAIL
US POSTAGE
PAID
SAN ANTONIO TX
PERMIT NO 4043
8177 S. Harvard, #FF
Tulsa, OK 74137
James B. Richie
Chief Auctioneer
TX Lic# 13742, OK Lic# 0330149
WEDNESDAY • AUGUST 6th, 2014 • TYLER, TEXAS • 9:00AM (CDT)
DRILLING COMPONENTS
NATIONAL OILWELL IDS 350P 350-Ton Top Drive w/CAT 3512 Gen,
NOV Hyd Power Unit • HYUNDAI HFC7632-64E 1833 KVA 600 Volt Gen
p/b DETROIT MTU 12VDDC Eng, Premium Gauge Panel, Covered Skid
(Note: 2594 Hours Since NEW – Very Nice!) • NATIONAL 110 D/D Drwwks • Gen House w/G. DENVER ADL Air Compressor, Volume Tank •
5-Compartment Mud Tank, 350-Bbl Capacity • 11,594’ (374 Jts) 5”, S135 Drill Pipe • 1829’ (56 Jts) 5”, S-135 Drill Pipe • TOWNSEND TM-206 7-1/16” 3000# Dbl Manual BOP (REBUILT & No Rams) • (1)
INGERSOLL-RAND 2500# Air Hoist (REBUILT Like NEW), (2) THERN
TA 2500# Air Hoists • (2) Open Top 202-Bbl Water Tanks • FOLEY Type
Tongs w/Heads • BJ Type C Tongs w/Heads • Drill Pipe Slips • NATIONAL 110
Low Drums & Brake Bands (Appear UNUSED) • Asst’d Centrifugal Pumps
YARD #7 - PALESTINE, TX
DIRECTIONS: 6389 HWY 79 South, Palestine, TX 75801. From the intersection of Hwy 79/84 and Loop 256 in Palestine, TX. Travel Southwest on Hwy 79
for approx. 5 miles to yard on the left at Bullard St. PREVIEW beginning July
28, 2014, 8am-4pm, Mon.-Fri. CHECKOUT thru August 17, 2014, 8am-4pm,
Mon.-Fri. CONTACT: Jerry Don Kelly @ 903-724-9306.
RIG #10
RMI 750 Drawworks, PARMAC Brake p/b (2) CAT C-15 Engs • LEE C. MOORE
131’H 400,000# SHL Mast & DSI 2-Piece Substructure w/Pony Subs • (2) G.
DENVER PZ-9 Triplex Pumps, Ea p/b CAT 398 Eng • NATIONAL 9-P-100
Triplex Pump p/b CAT 379B Eng • IDECO 160-Ton Block/Hook Combo •
KOOMEY 5-Station Closing Unit • 5000# Choke Manifold • 2-Tank Mud System • Water Tank • 4-Comp Lubester • Rig House • Doghouse • Parts House
YARD #8 - KILGORE, TX
DIRECTIONS: 805 Whiteside Lane, Kilgore, TX 75662. From I-20 & 259/31 S,
follow Business 259 South through Kilgore to the intersection of 259 S & Woodlawn St. (traffic light). Turn right (west) & go 1.0 mile to Whiteside Ln. (Calvary
Way Church sign on left). Turn left to yard on the right. PREVIEW beginning
July 28, 2014, 8am-4pm, Mon.-Fri. CHECKOUT thru August 15, 2014, 8am4pm, Mon.-Fri. CONTACT: Chuck Rheady @ 979-204-2212 or Matthew LeTourneau 903-220-9870.
DRILLING COMPONENTS
CAT 3408 Eng w/Radiator & Gauges • OILWELL 20-1/2” Rotary Table • NATIONAL IDEAL 17-1/2” Rotary Table • SHAFFER 13-5/8” Dbl Bop 5000# •
CAMERON QRC 10” 3000# Dbl BOP • HYDRIL GK 10” 3000# Annular BOP •
CAMERON 4” Sgl BOP • HYDRIL GK 11” 10,000# Annular BOP • 4-Station
Closing Unit • (2) F-1000 Mud Manifolds (Appear UNUSED) • (2) VARCO Kelly
Spinners • INTERNATIONAL Kelly Spinner • (2) VARCO HDP 5-1/4” Hex Kelly
JAMES DYESS, AUCTIONEER
Drives • BAASH-ROSS 5-1/4” Hex Kelly Drive • (2) VARCO 5-1/4” Sq Kelly
Drive • JOY 500-Ton Hook • PARKERSBURG 48” Brake w/Cradle & Water
Tank • (3) 10,000# Chicksans, (2) Hyd Choke Manifolds • (6) Air Compressors
w/Elec Motors • (11) Pallets Changeover Subs • MATHEY GCS Wireline Unit •
(4) Deadline Anchors
YARD #9 - TYLER, TX
DIRECTIONS: 11940 Constanine Ave., Tyler, TX 75708. From I-20 & Hwy 271,
travel south on Hwy 271 for 5 miles to FM 3270 on the right (west). Turn right
& go 0.4 miles to FM 344 or Constanine Ave. Turn right & go 0.6 miles to yard
on Left. PREVIEW beginning, July 28, 2014, 8am-4pm, Mon.-Fri., no week-
ends. CHECKOUT thru August 15, 2014, 8am-4pm, Mon.-Fri., no weekends.
(PPE REQUIRED). CONTACT: Wes Maxwell @ 903-707-1134 or Russ
Lemons @ 903-574-3329.
(NOTE: The Following Engines Were Running Take Outs
When Rigs Were Stacked -SSS)
(2) CAT 3408 DITA Engs w/OILWORKS F11561-TCO Torque Converters • (2)
CAT 3406 Engs Ea w/ALLISON 5860 Trans • (2) DETROIT 8V-71 Engs Ea
w/Tu-Flo 1000 Compressors & ALLISON 5860 Trans
JAMES B. RICHIE, AUCTIONEER