holtest / borematic

Transcription

holtest / borematic
Small Tool Instruments and Data Management
Bore Micrometers
HOLTEST / BOREMATIC
Catalog No. E4280-568, 468, 368
Holtest Series micrometers make three-point / two-point
bore diameter measurements at top accuracy
World Class, High Performance, High Accuracy
Three-Point / Two-Point bore Micrometers
Digimatic Holtest
Lever operation allows easy
and speedy measurement
Borematic
568-338-10
468-161
468-168
468-174
568-333
Micrometer adjustment provides tactile feedback
Holtest
Holtest Type II
Two-point
contact type
368-770
368-168
368-001
368-174
368-769
368-774
The performance of the well-established Mitutoyo Holtest series, well-known for
their highly stable three-point self-centering action, has been further enhanced
by coating the contact surfaces with titanium nitride.
Borematic
Digimatic Holtest
Holtest Type II
Holtest
• Titanium-coated measuring pins provide excellent durability and impact
resistance and allow the instrument to measure right to the bottom of a
blind hole.
• Digital display with quick-action lever operation enables easy and speedy
measurement.
• Built-in Absolute System eliminates the necessity to set the origin point
at every power-on. The system is also immune to over-speed errors, thus
increasing the reliability of measurement.
• A tolerance judgment function is built in to allow GO/NG judgment based
on user-defined upper and lower limit settings.
• Titanium-coated measuring pins provide excellent durability and impact
resistance and allow the instrument to measure right to the bottom of a
blind hole.
• DIGIMATIC Holtest is equipped with a digital display for easy readability.
• ABS (absolute) and INC (incremental) measuring modes promote highly
efficient working.
• DIGIMATIC Holtest is compatible with statistical process control systems
and measurement support systems.
• DIGIMATIC Holtest is able to memorize two preset values for the datum
point.
• Function lock key prevents changing the datum point accidentally.
• Affordably priced, popular Holtest
• The anvils and cone are made from an alloy tool steel with a hardness of
HRC60.5 or more.
• Versions for measurement of special forms can be custom manufactured
in tool steel.
• Titanium-coated measuring pins provide excellent durability and impact
resistance and allow the instrument to measure right to the bottom of a
blind hole.
• Three-point design assures self-centering action for stable measurements
in the range above 8mm bore diameter.
• Bore micrometers fitted with the constant-force ratchet enable consistent
measurements with minimum variation between operators.
Titanium Coated Measuring Pins
Measuring a Blind Hole
Applying a titanium-nitride coating to the contact faces of the
measuring pins has improved durability and abrasion resistance.
With this coating the pin material can be changed from carbide to
hardened steel to provide extra toughness for preventing a contact
face being chipped during measurement.
Measuring pins attached to the anvils permit measuring the
diameter of a blind hole almost down to the bottom.
*The Holtest type II does not use measuring pins.
Unit: mm
4000
1330-1530
1220-1800
a
1700-2000
Holtest Type II
b
Shear strength
(N/mm2)
a
Titaniumcoated steel
Carbide
Hardness
(Hv)
b
c
Comparison of Pin Materials
Measuring Range
a
2-6
—
6-12
2
12-20
0.3 (2.6)
20-30
0.3 (3.4)
30-50
0.3 (3.4)
50-100 / 50-125*
0.3 (3.4)
*Borematic
100-300
12.4 (19.6)
( ): Holtest Type II
Measuring Deep Holes
An extension tube (optional
accessory) can be fitted to
enable measurement of
deep holes.
Inspection Certificate Supplied as Standard.
The Inspection Certificate supplied with each instrument, which
assures product quality and safety, cannot be
used for obtaining a Calibration Certificate
since the purchase date is not stated.
Mitutoyo will issue a calibration certificate, at
cost, on request.
b
—
—
5.6
8.3
13
c
2
2.5
3.5 (3.5)
5.2 (5.2)
10 (10)
17
14 (14)
21 13.8 (13.8)
Borematic
Borematic
Individual Gages: includes one digital display unit and one interchangeable
measuring head (plus adapter if required)
Metric
Size range
6-8mm
8-10mm
10-12mm
12-16mm
16-20mm
20-25mm
25-30mm
30-40mm
40-50mm
50-63mm
62-75mm
75-88mm
87-100mm
100-113mm
112-125mm
50-75mm
75-100mm
100-125mm
Order No.
568-331
568-332
568-333
568-334-10
568-335-10
568-336-10
568-337-10
568-338-10
568-339-10
568-340-10
568-341-10
568-342-10
568-343-10
568-344-10
568-345-10
568-346-10
568-347-10
568-348-10
Inch/Metric
Size range Order No.
.275"-.350"
568-431
.350"-.425"
568-432
.425"-.500"
568-433
.50"-.65"
568-434-10
.65"-.80"
568-435-10
.8"-1.0"
568-436-10
1.0"-1.2"
568-437-10
1.2"-1.6"
568-438-10
1.6"-2.0"
568-439-10
2.0"-2.5"
568-440-10
2.5"-3.0"
568-441-10
3.0"-3.5"
568-442-10
3.5"-4.0"
568-443-10
4.0"-4.5"
568-444-10
4.5"-5.0"
568-445-10
2.0"-3.0"
568-446-10
3.0"-4.0"
568-447-10
4.0"-5.0"
568-448-10
with titanium coated measuring pins
Accuracy*
±5µm (within 5µm)
±5µm (within 5µm)
±5µm (within 5µm)
±5µm (within 5µm)
±5µm (within 5µm)
±6µm (within 6µm)
±6µm (within 6µm)
±6µm (within 6µm)
±6µm (within 6µm)
±6µm (within 6µm)
±6µm (within 6µm)
±6µm (within 6µm)
±6µm (within 6µm)
±6µm (within 6µm)
±6µm (within 6µm)
±6µm (within 6µm)
±6µm (within 6µm)
±6µm (within 6µm)
Extension tube
100mm (952322)
100mm (952322)
100mm (952322)
150mm (952621)
150mm (952621)
150mm (952622)
150mm (952622)
150mm (952622)
150mm (952622)
150mm (952623)
150mm (952623)
150mm (952623)
150mm (952623)
150mm (952623)
150mm (952623)
150mm (952623)
150mm (952623)
150mm (952623)
Technical Data
Accuracy:
Resolution:
Measuring pins:
Refer to the order No. list.
0.001mm or .00005"/0.001mm
Carbide or titanium-coated alloy
steel* (*over 12mm/.5" models)
Measuring method: Three-point contact
Display:
LCD
Battery: SR44 (1pc.) (938882)
Battery life:
Approx. 1 year
Functions
Zero-Set, presetting, GO/NO-GO judgment, power on/off,
inch/mm conversion (inch/mm type only), SPC data output,
data hold
Optional Accessory
937387:
965013:
––––––: SPC cable (1m)
SPC cable (2m)
Extension tube (refer to the order No. list)
Extension rod
*Instrumental error excluding quantizing error (maximum error)
Complete-Unit Gage Sets: includes several individual gages to cover the overall size range of the set
Metric
Overall range
6-12mm
12-25mm
25-50mm
50-75mm
75-100mm
50-100mm
Inch/Metric
Overall range Order No.
.275"-.5"
568-987
.5"-1"
568-988-10
1"-2"
568-989-10
2"-3"
568-990-10
3"-4"
568-991-10
2"-4"
568-992-10
with titanium coated measuring pins
Order No.
568-981
568-982-10
568-983-10
568-984-10
568-985-10
568-986-10
Range of Individual gages
6-8, 8-10, 10-12mm
12-16, 16-20, 20-25mm
25-30, 30-40, 40-50mm
50-63, 62-75mm
75-88, 87-100mm
50-75*, 75-100mm*
Setting rings included
ø8mm, ø10mm
ø16mm, ø20mm
ø30mm, ø40mm
ø62mm
ø87mm
ø62mm, ø87mm
*with interchangeable measuring pins (4 sets)
with titanium coated measuring pins
Range of Individual gages
.275-.35", .35-.425", .425-.5"
.5-.65", .65-.8", .8-1"
1-1.2", 1.2-1.6", 1.6-2"
2-2.5", 2.5-3"
3-3.5", 3.5-4"
2-3"*, 3-4"*
Setting rings included
.35" DIA., .425" DIA.
.65" DIA., .8" DIA.
1.2" DIA., 1.6" DIA.
2.5" DIA.
3.5" DIA.
2.5" DIA., 3.5" DIA.
*with interchangeable measuring pins (4 sets)
Interchangeable-Head Sets: includes one digital display unit with several interchangeable measuring heads (and adapters
as required) to cover the total size range plus one extension tube
Metric
6-12mm
Inch/Metric
with titanium coated measuring pins
Overall range Order No.
568-971
Range of each head
6-8, 8-10, 10-12mm
Setting rings included
Overall range
.275"-.5"
.5"-1"
1"-2"
2"-4"
2"-4"
ø8mm, ø10mm
12-25mm
568-972-10 12-16, 16-20, 20-25mm
ø16mm, ø20mm
25-50mm
568-973-10 25-30, 30-40, 40-50mm
ø30mm, ø40mm
50-100mm
50-63, 62-75, 75-88,
568-974-10
87-100mm
ø62mm, ø87mm
50-100mm
568-975-10 50-75*, 75-100mm*
ø62mm, ø87mm
Order No.
568-976
568-977-10
568-978-10
568-979-10
568-980-10
with titanium coated measuring pins
Range of each head
.275-.35", .35-.425", .425-.5"
.5-.65", .65-.8", .8-1"
1-1.2", 1.2-1.6", 1.6-2"
2-2.5", 2.5-3", 3-3.5", 3.5-4"
2-3"*, 3-4"*
Setting rings included
.35" DIA., .425" DIA.
.65" DIA., .8" DIA.
1" DIA., 1.6" DIA.
2.5" DIA., 3.5" DIA
2.5" DIA., 3.5" DIA
*with interchangeable measuring pins (4 sets)
*with interchangeable measuring pins (4 sets)
Complete-Unit Set: 568-971
Interchangeable-Head Set: 568-983-10
Digimatic Holtest
Digimatic Holtest
Individual Gages: includes one combination display unit and one
interchangeable measuring head
Metric
Range
6-8mm
8-10mm
10-12mm
12-16mm
16-20mm
20-25mm
25-30mm
30-40mm
40-50mm
50-63mm
62-75mm
75-88mm
87-100mm
100-125mm
125-150mm
150-175mm
175-200mm
200-225mm
225-250mm
250-275mm
275-300mm
Order No.
468-161
468-162
468-163
468-164
468-165
468-166
468-167
468-168
468-169
468-170
468-171
468-172
468-173
468-174
468-175
468-176
468-177
468-178
468-179
468-180
468-181
Inch/Metric
Range
Order No.
.275"-.35"
468-261
.35"-.425"
468-262
.425"-.5"
468-263
.5"-.65"
468-264
.65"-.8"
468-265
.8"-1"
468-266
1"-1.2"
468-267
1.2"-1.6"
468-268
1.6"-2"
468-269
2"-2.5"
468-270
2.5"-3"
468-271
3"-3.5"
468-272
3.5"-4"
468-273
4"-5"
468-274
5"-6"
468-275
6"-7"
468-276
7"-8"
468-277
8"-9"
468-278
9"-10"
468-279
10"-11"
468-280
11"-12"
468-281
with titanium coated measuring pins
Accuracy*
±2µm (within 2µm)
±2µm (within 2µm)
±2µm (within 2µm)
±2µm (within 2µm)
±2µm (within 2µm)
±3µm (within 3µm)
±3µm (within 3µm)
±3µm (within 3µm)
±3µm (within 3µm)
±3µm (within 3µm)
±3µm (within 3µm)
±3µm (within 3µm)
±3µm (within 3µm)
±5µm (within 5µm)
±5µm (within 5µm)
±5µm (within 5µm)
±5µm (within 5µm)
±5µm (within 5µm)
±5µm (within 5µm)
±5µm (within 5µm)
±5µm (within 5µm)
Extension tube
100mm (952322)
100mm (952322)
100mm (952322)
150mm (952621)
150mm (952621)
150mm (952622)
150mm (952622)
150mm (952622)
150mm (952622)
150mm (952623)
150mm (952623)
150mm (952623)
150mm (952623)
150mm (952623)
150mm (952623)
150mm (952623)
150mm (952623)
150mm (952623)
150mm (952623)
150mm (952623)
150mm (952623)
Technical Data
Accuracy:
Resolution:
Measuring pins:
Refer to the order No. list.
0.001mm or .00005"/0.001mm
(over 5" models: .0001"/0.001mm)
Carbide or titanium-coated alloy steel*
(*over 12mm/.5" models)
Measuring method: Three-point contact
Display:
LCD
Battery:
SR44 (1pc.), 938882
Battery life:
Approx. 8 months under normal use
Functions
Zero-setting, data hold, data output, preset, inch/mm
reading (inch/mm models), function rock, power on/off,
origin setting
Alarm: Low voltage, Counting value composition error
Optional Accessories
05CZA662: SPC cable (1m)
05CZA663: SPC cable (2m)
04AZB157: Mounting plate for micrometer stand
— :
Extension tube (refer to the order No. list)
*Instrumental error excluding quantizing error (maximum error)
Complete-Unit Sets: includes several individual gages to cover the overall
size range of the set
Metric
Overall range Order No.
6-12mm
468-981
12-25mm
468-982
25-50mm
468-983
50-75mm
468-984
75-100mm
468-985
Inch/Metric
Overall range Order No.
.275"-.5"
468-986
.5"-1"
468-987
1"-2"
468-988
2"-3"
468-989
3"-4"
468-990
with titanium coated measuring pins
Range of Individual gages
6-8, 8-10, 10-12mm
12-16, 16-20, 20-25mm
25-30, 30-40, 40-50mm
50-63, 62-75mm
75-88, 87-100mm
156-101:
Micrometer stand
Setting rings included
ø8mm, ø10mm
ø16mm, ø20mm
ø30mm, ø40mm
ø62mm
ø87mm
Mounting plate for stand
with titanium coated measuring pins
Range of Individual gages
.275-.35", .35-.425", .425-.5"
.5-.65", .65-.8", .8-1"
1-1.2", 1.2-1.6", 1.6-2"
2-2.5", 2.5-3"
3-3.5", 3.5-4"
Setting rings included
.35" DIA., .425" DIA.
.65" DIA., .8" DIA.
1.2" DIA., 1.6" DIA.
2.5" DIA.
3.5" DIA.
Interchangeable-Head Gage Sets: includes one combination display unit with several interchangeable measuring heads
to cover the total size range plus one extension tube
Metric
Range
6-12mm
12-20mm
20-50mm
50-100mm
100-200mm
Inch/Metric
with titanium coated measuring pins
Order No.
Range of each head
468-971 6-8, 8-10, 10-12mm
468-972 12-16, 16-20mm
20-25, 25-30, 30-40,
468-973
40-50mm
50-63, 62-75, 75-88,
468-974
87-100mm
100-125, 125-150, 150-175,
468-975
175-200mm
Setting rings included
ø8mm, ø10mm
ø16mm
Range
.275"-.5"
.5"-.8"
.8"-2"
2"-4"
4"-8"
ø25mm, ø40mm
ø62mm, ø87mm
Order No.
468-976
468-977
468-978
468-979
468-980
with titanium coated measuring pins
Range of each head
.275-.35", .35-.425", .425-.5"
.5-.65", .65-.8"
.8-1", 1-1.2", 1.2-1.6", 1.6-2"
2-2.5", 2.5-3", 3-3.5", 3.5-4"
4-5", 5-6", 6-7", 7-8"
Setting rings included
.35" DIA., .425" DIA.
.65" DIA.
1" DIA., 1.6" DIA.
2.5" DIA., 3.5" DIA
5" DIA., 7" DIA.
ø125mm, ø175mm
Complete-Unit Set: 468-963-10
Interchangeable-Head Set: 468-953-10
Holtest
Holtest
Individual Gages: includes a micrometer thimble
with measuring head
Metric
Size range
2-2.5mm
2.5-3mm
3-4mm
4-5mm
5-6mm
—
6-8mm
8-10mm
10-12mm
12-16mm
16-20mm
20-25mm
25-30mm
30-40mm
40-50mm
50-63mm
62-75mm
75-88mm
87-100mm
100-125mm
125-150mm
150-175mm
175-200mm
200-225mm
225-250mm
250-275mm
275-300mm
Order No.
368-001
368-002
368-003
368-004
368-005
—
368-101-10
368-102-10
368-103-10
368-164
368-165
368-166
368-167
368-168
368-169
368-170
368-171
368-172
368-173
368-174
368-175
368-176
368-177
368-178
368-179
368-180
368-181
Inch/Metric
Size range Order No.
.08"-.1"
368-021
.1"-.12"
368-022
.12"-.16"
368-023
.16"-.2"
368-024
.2"-.24"
368-025
.24"-.28"
368-026
.275"-.35" 368-201-10
.35"-.425" 368-202-10
.425"-.5" 368-203-10
.5"-.65"
368-264
.65"-.8"
368-265
.8"-1"
368-266
1"-1.2"
368-267
1.2"-1.6"
368-268
1.6"-2"
368-269
2"-2.5"
368-270
2.5"-3"
368-271
3"-3.5"
368-272
3.5"-4"
368-273
4"-5"
368-274
5"-6"
368-275
6"-7"
368-276
7"-8"
368-277
8"-9"
368-278
9"-10"
368-279
10"-11"
368-280
11"-12"
368-281
with titanium coated measuring pins
Accuracy*
±2µm (within 2µm)
±2µm (within 2µm)
±2µm (within 2µm)
±2µm (within 2µm)
±2µm (within 2µm)
±2µm (within 2µm)
±2µm (within 2µm)
±2µm (within 2µm)
±2µm (within 2µm)
±2µm (within 2µm)
±2µm (within 2µm)
±3µm (within 3µm)
±3µm (within 3µm)
±3µm (within 3µm)
±3µm (within 3µm)
±3µm (within 3µm)
±3µm (within 3µm)
±3µm (within 3µm)
±3µm (within 3µm)
±5µm (within 5µm)
±5µm (within 5µm)
±5µm (within 5µm)
±5µm (within 5µm)
±5µm (within 5µm)
±5µm (within 5µm)
±5µm (within 5µm)
±5µm (within 5µm)
Extension rod
—
—
—
—
—
—
100mm (952322)
100mm (952322)
100mm (952322)
150mm (952621)
150mm (952621)
150mm (952622)
150mm (952622)
150mm (952622)
150mm (952622)
150mm (952623)
150mm (952623)
150mm (952623)
150mm (952623)
150mm (952623)
150mm (952623)
150mm (952623)
150mm (952623)
150mm (952623)
150mm (952623)
150mm (952623)
150mm (952623)
Technical Data
Accuracy: Refer to the order No. list.
Graduation: 0.001mm, 0.005mm*, .0001" or .0002"*
(*over 12mm or .5" models)
Range
Measuring
method
Measuring pin material
2-3mm
.08-.12"
3-6mm
.12-.28"
6-12mm
.28-.5"
over 12mm
over .5"
Two-point
Hardened steel (HRC60.5
or more)
Hardened steel (HRC60.5
or more)
Two-point
Three-point Carbide
alloy steel
Three-point Titanium-coated
(1700-2000Hv)
Optional Accessory
––––––:
Cone
Extension tube (refer to the order No. list)
Carbide
ball
Carbide
pin
Cone
Carbide
ball
Carbide
pin
Anvil
Anvil
Carbide-tipped or titanium-coated measuring pin
*Instrumental error (maximum error)
Gage Sets: includes several individual gages to cover the overall size range
of the set
Metric
Inch/Metric
with titanium coated measuring pins
Overall range Order No.
Range of each gage
2-3mm
368-906 2-2.5, 2.5-3mm
3-6mm
368-907 3-4, 4-5, 5-6mm
6-12mm
368-901-10 6-8, 8-10, 10-12mm
12-20mm
368-912 12-16, 16-20mm
20-25, 25-30, 30-40,
20-50mm
368-913
40-50mm
50-63, 62-75, 75-88,
50-100mm
368-914
87-100mm
100-125, 125-150, 150-175,
100-200mm
368-915
175-200mm
with titanium coated measuring pins
Overall range Order No.
Range of each gage
.08"-.12"
368-926 .08-.1", .1-.12"
.12-.16", .16-.2", .2-.24",
.12"-.28"
368-927
.24-.28"
.275"-.5"
368-921-10 .275-.35", .35-.425", .425-.5"
.5"-.8"
368-917 .5-.65", .65-.8"
.8"-2"
368-918 .8-1", 1-1.2", 1.2-1.6", 1.6-2"
2"-4"
368-919 2-2.5", 2.5-3", 3-3.5", 3.5-4"
4"-8"
368-920 4-5", 5-6", 6-7", 7-8"
Setting rings included
ø2.5mm
ø4mm, ø5mm
ø8mm, ø10mm
ø16mm
ø25mm, ø40mm
ø62mm, ø87mm
Setting rings included
.1" DIA.
.16" DIA., .24" DIA.
.35" DIA., .5" DIA.
.65" DIA.
1" DIA., 1.6" DIA.
2.5" DIA., 3.5" DIA.
5" DIA., 7" DIA.
ø125mm, ø175mm
368-912
368-906
368-913
Holtest Type II
Holtest Type II
Individual Gages: includes a micrometer thimble
with measuring head
Metric
Range
12-16mm
16-20mm
20-25mm
25-30mm
30-40mm
40-50mm
50-63mm
62-75mm
75-88mm
87-100mm
100-125mm
125-150mm
150-175mm
175-200mm
200-225mm
225-250mm
250-275mm
275-300mm
Technical Data
Accuracy:
Refer to the list of specifications.
Graduation:
0.001mm or .0002"
Measuring method:Three-point method
Contact point:
Carbide-tipped
Inch/Metric
Order No.
368-764
368-765
368-766
368-767
368-768
368-769
368-770
368-771
368-772
368-773
368-774
368-775
368-776
368-777
368-778
368-779
368-780
368-781
Range
.5"-.65"
.65"-.8"
.8"-1"
1"-1.2"
1.2"-1.6"
1.6"-2"
2"-2.5"
2.5"-3"
3"-3.5"
3.5"-4"
4"-5"
5"-6"
6"-7"
7"-8"
8"-9"
9"-10"
10"-11"
11"-12"
Order No.
368-864
368-865
368-866
368-867
368-868
368-869
368-870
368-871
368-872
368-873
368-874
368-875
368-876
368-877
368-878
368-879
368-880
368-881
Accuracy
±2µm (within 2µm)
±2µm (within 2µm)
±3µm (within 3µm)
±3µm (within 3µm)
±3µm (within 3µm)
±3µm (within 3µm)
±3µm (within 3µm)
±3µm (within 3µm)
±3µm (within 3µm)
±3µm (within 3µm)
±5µm (within 5µm)
±5µm (within 5µm)
±5µm (within 5µm)
±5µm (within 5µm)
±5µm (within 5µm)
±5µm (within 5µm)
±5µm (within 5µm)
±5µm (within 5µm)
Extension tube
150mm (952621)
150mm (952621)
150mm (952622)
150mm (952622)
150mm (952622)
150mm (952622)
150mm (952623)
150mm (952623)
150mm (952623)
150mm (952623)
150mm (952623)
150mm (952623)
150mm (952623)
150mm (952623)
150mm (952623)
150mm (952623)
150mm (952623)
150mm (952623)
Gage Sets: includes several individual gages to cover the overall size range of the
set
Metric
Overall range Order No.
Range of each gage
12-20mm
368-991 12-16, 16-20mm
20-25, 25-30, 30-40,
20-50mm
368-992
40-50mm
50-63, 62-75, 75-88,
50-100mm
368-993
87-100mm
100-125, 125-150, 150-175,
100-200mm
368-994
175-200mm
Inch/Metric
Overall range Order No.
.5"-.8"
368-995
.8"-2"
368-996
2"-4"
368-997
4"-8"
368-998
Setting rings included
ø16mm
ø25mm, ø40mm
ø62mm, ø87mm
ø125mm, ø175mm
368-991
368-992
368-993
368-994
Range of each gage
.5-.65", .65-.8"
.8-1", 1-1.2", 1.2-1.6", 1.6-2"
2-2.5", 2.5-3", 3-3.5", 3.5-4"
4-5", 5-6", 6-7", 7-8"
Setting rings included
.65" DIA.
1" DIA., 1.6" DIA.
2.5" DIA., 3.5" DIA.
5" DIA., 7" DIA.
Setting Rings
Optional Setting Rings
Ceramic Setting Rings
Setting Rings
177-424
177-300
177-147
Features
•Used for quick zero adjustment of dial bore
gages, Holtest, and inside micrometers.
•Actual inside diameter is marked on each
ring.
•Ceramic Setting Rings are also available.
Anticorrosion treatment is usually not
required when handling Ceramic Setting
Rings, resulting in simple maintenance and
storage.
Technical Data
Maximum difference between the nominal size and
the actual diameter of setting rings:
±0.01mm for ø1-45mm
±0.02mm for ø50-300mm
±.0004" for .1"-1.8" DIA.
±.0008" for 2"-12" DIA.
Cylindricity of setting rings:
1.0µm for ø1-60mm
1.5µm for ø62-90mm
2.0µm for ø100-150mm
2.5µm for ø175-225mm
3.0µm for ø250-300mm
.00004" for .1"-2.4" DIA.
.00006" for 2.5"-3.6" DIA.
.00008" for 4"-6" DIA.
.00010" for 7"-9" DIA.
.00012" for 10"-12" DIA.
177-429
177-432
177-146
177-139
177-205
Inch
Size
.1"
.16"
.24"
.275"
.35"
.425"
.50"
.60"
.65"
.70"
.80"
1.0"
1.2"
1.4"
1.6"
1.8"
2.0"
2.4"
2.5"
2.8"
3.0"
3.2"
3.5"
3.6"
4.0"
5.0"
6.0"
7.0"
8.0"
9.0"
10.0"
11.0"
12.0"
Order No.
177-209
177-206
177-207
177-281 / 177-522*
177-179 / 177-523*
177-283 / 177-524*
177-180 / 177-525*
177-181
177-182 / 177-527*
177-183
177-287 / 177-529*
177-184 / 177-530*
177-289 / 177-531*
177-185 / 177-532*
177-291 / 177-533*
177-186 / 177-534*
177-187
177-293
177-315
177-188
177-317
177-295
177-319
177-189
177-297
177-299
177-301
177-303
177-305
177-307
177-309
177-311
177-313
*Ceramic
Accuracy
±.00004"
±.00004"
±.00004"
±.00004"
±.00004"
±.00004"
±.00004"
±.00004"
±.00004"
±.00004"
±.00004"
±.00004"
±.00004"
±.00004"
±.00004"
±.00004"
±.00004"
±.00004"
±.00006"
±.00006"
±.00006"
±.00006"
±.00006"
±.00006"
±.00008"
±.00008"
±.00008"
±.00010"
±.00010"
±.00010"
±.00012"
±.00012"
±.00012"
Metric
Size
1mm
1.1mm
1.2mm
1.3mm
1.4mm
1.75mm
2mm
2.25mm
2.5mm
2.75mm
3mm
3.25mm
3.5mm
3.75mm
4mm
4.5mm
5mm
5.5mm
6mm
6.5mm
7mm
8mm
10mm
12mm
14mm
16mm
17mm
20mm
25mm
30mm
35mm
40mm
45mm
50mm
60mm
62mm
70mm
75mm
80mm
87mm
90mm
100mm
125mm
150mm
175mm
200mm
225mm
250mm
275mm
300mm
*Ceramic
Order No.
177-220
177-222
177-225
177-227
177-230
177-236
177-239
177-242
177-208
177-246
177-248
177-250
177-252
177-255
177-204
177-257
177-205
177-263
177-267 / 177-420*
177-271
177-275
177-125 / 177-423*
177-126 / 177-424*
177-284 / 177-425*
177-132
177-177 / 177-427*
177-133
177-286 / 177-429*
177-139 / 177-430*
177-288 / 177-431*
177-140 / 177-432*
177-290 / 177-433*
177-178 / 177-434*
177-146
177-292
177-314
177-147
177-316
177-294
177-318
177-148
177-296
177-298
177-300
177-302
177-304
177-306
177-308
177-310
177-312
Accuracy
±1.5µm
±1.5µm
±1.5µm
±1.5µm
±1.5µm
±1.5µm
±1.5µm
±1.5µm
±1.5µm
±1.5µm
±1.5µm
±1.5µm
±1.5µm
±1.5µm
±1.5µm
±1.5µm
±1.5µm
±1.5µm
±1.5µm
±1.5µm
±1.5µm
±1.5µm
±1.5µm
±1.5µm
±1.5µm
±1.5µm
±1.5µm
±1.5µm
±1.5µm
±1.5µm
±1.5µm
±1.5µm
±1.5µm
±1.5µm
±1.5µm
±1.5µm
±1.5µm
±1.5µm
±1.5µm
±1.5µm
±1.5µm
±1.5µm
±2.5µm
±2.5µm
±2.5µm
±2.5µm
±2.5µm
±2.5µm
±2.5µm
±2.5µm
Dimensions
Dimensions
Borematic
L
83
53
59
67
75
Range
6-12
12-20
20-30
30-50
50-100
100-300
Range
6-12
12-20
20-30
30-50
50-125
Unit: mm
Unit: mm
¬
Digimatic Holtest
,
,
( ): 50-125mm model
L
59
84
93
103.8
105.4
151.4
Holtest
Holtest Type II
,
Unit: mm
L
12
12
22
22
22
59
59
59
82
82
94
94
102
102
105
105
105
105
Range
100-125
125-150
150-175
175-200
200-225
225-250
250-275
275-300
L
161
161
161
161
161
161
161
161
,
Range
2-2.5
2.5-3
3-4
4-5
5-6
6-8
8-10
10-12
12-16
16-20
20-25
25-30
30-40
40-50
50-63
62-75
75-88
87-100
Unit: mm
Range
12-16
16-20
20-25
25-30
30-40
40-50
50-63
62-75
75-88
87-100
100-125
125-150
150-175
175-200
200-225
225-250
250-275
275-300
L
82
82
94
94
102
102
105
105
105
105
161
161
161
161
161
161
161
161
#OORDINATE¬-EASURING¬-ACHINES
6ISION¬-EASURING¬3YSTEMS
&ORM¬-EASUREMENT
Bore Micrometers
/PTICAL¬-EASURING
3ENSOR¬3YSTEMS
4EST¬%QUIPMENT¬AND¬
3EISMOMETERS
$IGITAL¬3CALE¬AND¬$2/¬3YSTEMS
3MALL¬4OOL¬)NSTRUMENTS¬AND
$ATA¬-ANAGEMENT
PAT. JP1783035, JP1783036, JP1845485, JP1745486, US4879508, US4878013, US5053715,
EP0248165, EP0404980, EP0240020, CN87102580, CN87102624, CN89106051
.OTE¬!LL¬INFORMATION¬REGARDING¬OUR¬PRODUCTS¬AND¬IN¬PARTICULAR¬THE¬ILLUSTRATIONS¬DRAWINGS¬DIMENSIONAL¬AND¬PERFORMANCE¬DATA¬CONTAINED¬IN¬THIS¬PAMPHLET¬AS¬WELL¬AS¬OTHER¬
TECHNICAL¬DATA¬ARE¬TO¬BE¬REGARDED¬AS¬APPROXIMATE¬AVERAGE¬VALUES¬7E¬THEREFORE¬RESERVE¬THE¬RIGHT¬TO¬MAKE¬CHANGES¬TO¬THE¬CORRESPONDING¬DESIGNS¬DIMENSIONS¬AND¬WEIGHTS¬
4HE¬STATED¬STANDARDS¬SIMILAR¬TECHNICAL¬REGULATIONS¬DESCRIPTIONS¬AND¬ILLUSTRATIONS¬OF¬THE¬PRODUCTS¬WERE¬VALID¬AT¬THE¬TIME¬OF¬PRINTING¬/NLY¬QUOTATIONS¬SUBMITTED¬BY¬OURSELVES¬
MAY¬BE¬REGARDED¬AS¬DElNITIVE
/UR¬PRODUCTS¬ARE¬CLASSIlED¬AS¬REGULATED¬ITEMS¬UNDER¬*APANESE¬&OREIGN¬%XCHANGE¬AND¬&OREIGN¬4RADE¬,AW¬0LEASE¬CONSULT¬US¬IN¬ADVANCE¬IF¬YOU¬WISH¬
TO¬EXPORT¬OUR¬PRODUCTS¬TO¬ANY¬OTHER¬COUNTRY¬)F¬THE¬PURCHASED¬PRODUCT¬IS¬EXPORTED¬EVEN¬THOUGH¬IT¬IS¬NOT¬A¬REGULATED¬ITEM¬#ATCH!LL¬CONTROLS¬
ITEM¬THE¬CUSTOMER¬SERVICE¬AVAILABLE¬FOR¬THAT¬PRODUCT¬MAY¬BE¬AFFECTED¬)F¬YOU¬HAVE¬ANY¬QUESTIONS¬PLEASE¬CONSULT¬YOUR¬LOCAL¬-ITUTOYO¬SALES¬OFlCE
-ITUTOYO#ORPORATION
¬3AKADO¬#HOME
4AKATSUKU¬+AWASAKISHI
+ANAGAWA¬¬*APAN
4¬¬¬¬¬
&¬¬¬¬¬
HTTPWWWMITUTOYOCOJP
32.60 0709 3 E (PA) NE, Printed in Japan
/UR¬ PRODUCTS¬ ARE¬ CLASSIlED¬ AS¬ REGULATED¬ ITEMS¬ UNDER¬
*APANESE¬ &OREIGN¬ %XCHANGE¬ AND¬ &OREIGN¬ 4RADE¬ ,AW¬
0LEASE¬CONSULT¬US¬IN¬ADVANCE¬IF¬YOU¬WISH¬TO¬EXPORT¬OUR¬
PRODUCTS¬ TO¬ ANY¬ OTHER¬ COUNTRY¬ )F¬ THE¬ PURCHASED¬
PRODUCT¬IS¬EXPORTED¬EVEN¬THOUGH¬IT¬IS¬NOT¬A¬REGULATED¬
ITEM¬ #ATCH!LL¬ CONTROLS¬ ITEM¬ THE¬ CUSTOMER¬ SERVICE¬
AVAILABLE¬FOR¬THAT¬PRODUCT¬MAY¬BE¬AFFECTED¬)F¬YOU¬HAVE¬
ANY¬QUESTIONS¬PLEASE¬CONSULT¬YOUR¬LOCAL¬-ITUTOYO¬SALES¬
OFlCE

Similar documents

Holtest Digimatic Holtest C-2, 3 Holtest C-4, 5 Holtest (Type II) C

Holtest Digimatic Holtest C-2, 3 Holtest C-4, 5 Holtest (Type II) C • 330-degree rotatable display unit for easy reading at any angle. • GO/NO-GO judgment function. • The ABSOLUTE linear encoder eliminates over-speed errors. • With SPC data output. • Setting rings ...

More information