2016 Summer NRA Program - Trinidad State Junior College

Transcription

2016
Summer NRA Program
NRA Program
Gunsmithing Program
Trinidad State Junior College
600 Prospect St.  Trinidad, Colorado 81082
1-800-621-8752 ext. 5541 or 719-846-5541
[email protected]
TABLE OF CONTENTS
Section
_____
Page #
President’s Welcome
3
Summer Coordinator’s Welcome
4
General Information
5-7
Gunsmithing Technician Certificate
8
Gunsmithing Fine Arts Certificate
8
NRA Firearms Safety Instructor Certificate
9
Using the GI Bill for courses
10
Shipping of Firearms
10
The NRA Foundation Scholarships
11-12
Bill Prator Gun Range
13
2016 Class Schedule
14-15
2016 Firearms Safety Instructor Schedule
16
Detailed Class Schedule – Description, Instructor Information and Tool Lists
Week 1
Week 2
Week 3
Week 4
Week 5
Week 6
Week 7
Week 8
Week 9
Pgs. 18-25
Pgs. 25-36
Pgs. 36-45
Pgs. 45-55
Pgs. 55-61
Pgs. 62-64
Pgs. 64-75
Pgs. 75-85
Pgs. 86-91
Registration Form
92
Map of Campus and Driving Directions
94
What to do in and around Trinidad
Hotel, Restaurant and Attraction Information
95
The fine print
99
2
PRESIDENT’S WELCOME
Excellence. One word says it all. The Gunsmithing School at Trinidad State Junior College
has a long tradition of excellence. But don’t take our word for it. Our affiliation with the National
Rifle Association assures students that the TSJC Summer NRA program is high
quality. For nine glorious weeks, the finest craftsmen and artists from the Gunsmithing world
gather in Southern Colorado to offer hands-on courses to students from all over the nation
and the world. Come enjoy the tradition. Immerse yourself.
Welcome to America’s Premier Gunsmithing School.
Sincerely,
Carmen M. Simone, Ph.D.
President
3
Welcome from the NRA Coordinator
It is my pleasure to welcome you to the Trinidad State Junior College Summer NRA Program.
Whether you are new to TSJC or a seasoned veteran of our Summer Program, we are sure you will
find courses to meet your needs.
I am pleased to announce that we will have a class for women taught by a female instructor, Sheila
Miles, this summer. For all you ladies out there who have wanted to get a taste of Gunsmithing, but
didn’t want to be the only woman in the class, this is your chance to participate! The class is
scheduled for the week of June 27th.
Trinidad State offers several educational options:





Two-year Associates of Applied Sciences in Gunsmithing (73 credit hours)
Two-year Certificate (58 credits)
NRA Firearms Safety Instructor Certificate (18 credits)
Gunsmithing Technician Certificate (16 credits)
Gunsmithing Fine Arts Certificate (18 credits)
Each option is eligible for Federal financial aid, GI Bill, and Vocational Rehab benefits depending
on your personal circumstances. Additional information about these options can be found on our
website at http://www.trinidadstate.edu/gunsmithing/ . The web address for the NRA Program has
changed to http://trinidadstate.edu/gunsmithing/nra_summer.html.
If you are taking Gunsmithing-related courses for credit in the summer program, you may be
eligible for an NRA Foundation scholarship. This does not apply to the NRA Firearms Safety
Instructor courses. NRA Foundation scholarships are based on financial need. Information and an
application form are available on pages 11/12. Scholarship applications are due by April 29, 2016.
Be sure to check out the workshops available for your spouse through the Southern Rockies
Heritage School at Trinidad State by visiting www.southernrockiesheritageschool.org. New classes
are continually added to this website so be sure to check back more than once.
Thank you for considering Trinidad State for your Gunsmithing and Firearms Safety education. We
look forward to seeing you!
Donna
Donna Haddow
Executive Assistant to the President
and NRA Program Coordinator
600 Prospect Street
Trinidad, CO 81082
Phone 719-846-5541
Toll free 1-800-621-8752 ext. 5541
Fax 719-846-5062
http://trinidadstate.edu/gunsmithing/nra_summer.html
4
GENERAL INFORMATION
Welcome to Trinidad State Jr. College’s 2016 Summer NRA Program. These short-term
summer courses are designed for anyone interested in learning Gunsmithing or art forms that have
been associated with Gunsmithing as a hobby or a vocation. Courses are available for the novice,
the current student, or the professional. Each course is organized individually for those who wish to
learn a new skill, refine a technique, or study new technical information. Students may sign up for
one course or multiple courses depending on their goals; however, because courses last from 8 a.m.
to 5 p.m. Monday through Friday, you may only sign up for one course per week.
Students must bring firearms to work on, and any supplies or parts necessary to complete their
project. See course descriptions and tool lists for details. Please keep in mind that the tools
suggested for each class are the minimum tools you should bring. Please feel free to bring any
additional tools you feel you may need. All participants must comply with all local, state, and
federal laws regarding firearms. All persons enrolled in Gunsmithing courses must be able to
legally own and possess firearms. NO WORKING FIREARMS or ammunition are allowed in the
residence halls. You may check your firearms into our gun vault on Monday morning. All firearms
brought into the classroom will need to have a day tag. Further information will be provided at
orientation. Some courses list prerequisites. If you are unsure as to whether or not your
education/training/life experience meets the stated prerequisites, please contact the course instructor.
Most classes are conducted from 8 a.m. to 5 p.m. Monday through Friday. Some classes may run
on a weekend or for extended hours each day – please be sure to read any notes located with the
course description. A TSJC/NRA certificate of completion is awarded for each course completed.
TSJC has a longstanding affiliation with the National Rifle Association. The NRA, however, is not
an accreditation agency. Trinidad State Junior College is accredited by the North Central
Association of Colleges and Secondary Schools. You will find all of our courses professional,
thoughtfully constructed, and well, fun.
All classes must be paid at the time of registration. It is important to register for courses
at least 5 weeks in advance to allow adequate time for the school to purchase supplies and
equipment. NOTE: some actions and other gun parts may take up to 2 months for delivery so
please allow adequate time to purchase your parts.
TUITION COST
If you take a course as continuing education, you will pay $380 per week regardless of where you
live. The tuition for some courses may be higher. Colorado residents taking courses for credit will
also pay $380 per week. Out-of-state residents taking courses for credit will pay out-of-state tuition;
however, rates may vary depending on where the student lives. Current tuition rates can be viewed
at http://www.trinidadstate.edu/pdf/students/fia/tuition_schedules_trinidad.pdf . There is a one-time
registration fee of $12.85.
If you have questions, please feel free to contact Donna Haddow at 719-846-5541, 1-800-621-8752
ext. 5541 or [email protected]
Payment for classes may be made by telephone or by mailing your registration to:
Trinidad State Jr. College, NRA Program
Attn: Donna Haddow
600 Prospect St., Trinidad, CO 81082
 Phone:1-800-621-8752 ext. 5541---Fax 719-846-5062
 email:[email protected]
5
CANCELLATION POLICY
Classes are NON-REFUNDABLE with one exception: classes which TSJC cancels due to
insufficient enrollment, will be reimbursed in full. Classes with less than 6 students are subject to
cancellation at the discretion of the College. We will make every effort to notify you of a
cancellation at least four weeks in advance of the class.
Due to high interest in the program, we can no longer give refunds to students who cancel without
proof of medical illnesses or deaths in the family. If you must cancel due to a medical emergency or
death in the family, you will need to provide proof of the illness or death.
COURSE TIMES and LOCATION
Unless otherwise stated, classes are conducted Monday through Friday from 8 a.m. through 5 p.m.
Monday morning orientation will be held in room 306 of the MULLEN BLDG at 8:00 a.m.
Students will then proceed to their classrooms. It is possible some courses may be held, at least in
part, at the Prator Gun Range.
Courses related to the NRA Firearms Safety Instructor Certificate will have dates and times listed in
the course schedule chart located in this document.
HOUSING
On-campus housing is available for $120 per week for single rooms, $150 for married housing in
our residence halls. Rooms include bed, bedding, workbench and a desk. Married rooms will have
two single beds. Please bring your own towels and personal items. A box fan or desk fan is
recommended; however a limited number of fans will be available to rent for $5 per week. TSJC
has a limited number of micro/fridges available at no charge for those with medical needs (such as
diabetics who need to store insulin). If the units are not in use by those with medical needs when
you are here, they will be available for rent on a first-come, first-served basis for $20 per week. You
may check in on Sunday afternoon before classes begin at no additional charge. If you are here for
multiple weeks, you may stay the weekend in between classes at no extra charge. Each room
contains a phone jack and hook up to basic television cable services. Television sets are not
provided. A television is located in the community room in the residence hall. We will make the
Student Life Center available for some hours depending on when work study students are available.
Single male students will be housed in Romero Hall. The residence hall used for married couples
will be determined at a later date. NO CHILDREN ARE ALLOWED TO STAY IN THE
RESIDENCE HALLS. MARRIED HOUSING IS FOR COUPLES ONLY. NO ALCOHOL is
allowed in the hall. ADDITIONAL INFORMATION CAN BE FOUND ON PAGES 103-112.
MEALS
Our cafeteria serves three meals daily. You may purchase a 10-meal ticket for $55 at the cafeteria
when you eat your first meal or pay for each meal individually. The cafeteria schedule will vary
depending on the number of students on campus. A schedule will be posted in the Gunsmithing
Department and in the residence halls when you arrive. Cafeteria information is available at:
https://trinidadstate.sodexomyway.com. Please be aware that you may need to dine off campus at
lower-volume times. Dining options can be found at http://historictrinidad.com/dining.html
The NRA Program hosts a free dinner for students each Thursday evening at 5:30 p.m. in the
Pioneer Room located in the Sullivan Center (same building as the cafeteria and bookstore)
6
INSURANCE
Students enrolled in TSJC classes are NOT covered by any type of health or accident insurance.
Students are expected to arrange their own insurance.
LOCATION
Trinidad is located 200 miles south of Denver and 120 miles south of Colorado Springs, Colorado
on Interstate 25. We are about 170 miles north of Santa Fe, New Mexico.

The nearest major airport is in Colorado Springs. If you are driving, take either exit -Exit 14 from
the north side of Trinidad or Exit 13B from the south side of Trinidad. **SEE MAP ON PAGE 92**
COMPUTER ACCESS
Trinidad State Junior College has free WIFI for students throughout the campus. Password will be
available at residence hall check in and orientation on Monday morning. TSJC computers are
available in the residence hall and the Student Life building (directly behind Romero Hall). If you
will need access to these computers, please let us know at the time of registration so we can have a
student email account set up and ready for you when you arrive.
7
Gunsmithing Technician Certificate – 16 Credits
Many NRA Summer Classes are available for credit. Classes taken for credit are eligible for
payment using financial aid, GI Bill, and Vocational Rehab. Certain restrictions may apply. Please
talk to our financial aid office concerning your individual case: Misti Stelljes, Associate Director
Financial Aid/Student Loan Specialist, at 719-846-5553 or [email protected]
http://www.trinidadstate.edu/students/financial-aid/veteran-benefits
Course Information
GUN 120
GUN 121
GUN 116
GUN 103
GUN 192
Core classes required for certificate
Name
Basic Machine Shop
Advanced Machine Shop
Welding for Gunsmiths
Bluing
Benchmetal Hand Tools & Metallurgy
Three electives from courses offered for credit
Credit Hours
2
2
2
2
2
6
**Note, the Benchmetal class was added to the required courses beginning in 2015.
Other summer courses that are offered for credit may be taken as electives toward the certificate.
Courses offered as continuing education only do not count toward the certificate.
Tuition for Colorado residents $380.00
Tuition for out-of-state students --Provided upon request
Colorado residents taking classes for credit will need to register for the College Opportunity Fund
(COF). Registration for COF may be done by clicking here. If you previously took classes for credit,
you do not need to register for COF again. If you are not registered for COF, you will not receive
the stipend on your account and will pay higher tuition.
Gunsmithing Fine Arts Certificate - 18 credits
New this summer is a Gunsmithing Fine Arts certificate. We have typically offered most of these
classes and thought it made sense to put them all together in a certificate along with some basic art
education.
Course Information
ART 275
GUS 129
GUS 229
GUN 141
GUN 292
GUN 208
GUN 140
GUN 289
Name
Basic Drawing
Introductory Hand Engraving
Advanced Hand Engraving
Gunstock Carving
Scrimshaw
**Alternative Metal Finishes
Checkering
Special Topics – Gunsmithing Fine Arts Capstone
Total Credits
**May substitute Vintage Metal Finishing or Color Case Hardening for this class
8
Credit hours
2
3
3
2
2
2
2
2
18
NRA Firearms Safety Instructor Certificate– 18 Credits
TSJC is proud to announce the addition of the NRA Firearms Safety Instructor Certificate.
Approved by the Colorado Department of Education and the Higher Learning Commission, this
certificate may make it possible for students to use financial aid, GI Bill, and Vocational
Rehabilitation programs to pay for the classes depending on their eligibility.
Course Information
GUS 100 or GUR 101
GUR 106
GUR 107
GUR 108
GUR 109
GUR 110
GUR 111
GUR 120
GUR 200
GUR 201
GUR 206
GUR 207
GUR 208
GUR 209
GUR 210
GUR 211
GUR 250
COM 115
Name
Orientation and Firearms Safety or NRA Home
Firearms Safety
NRA Basic Pistol Shooting
NRA Basic Shotgun Shooting
NRA Muzzleloading Pistol Shooting
NRA Muzzleloading Rifle Shooting
NRA Basic Rifle Shooting
NRA Muzzleloading Shotgun Shooting
NRA Range Safety Officer Course
NRA Basic Instructor Training
NRA Home Firearms Safety Instructor
NRA Basic Pistol Shooting Instructor
NRA Basic Shotgun Shooting Instructor
NRA Muzzleloading Pistol Instructor
NRA Muzzleloading Rifle Instructor
NRA Basic Rifle Shooting Instructor
NRA Muzzleloading Shotgun Instructor
Instructional Leadership
Public Speaking
Total Certificate
Credit Hours
0.5
1
1
1
1
1
1
0.5
0.5
0.5
1
1
1
1
1
1
1
3
18
** Note – if you have taken public speaking at another college, please ask us about transferring the credit to TSJC in
place of taking the class again.
9
USING THE GI BILL FOR SUMMER NRA COURSES
TSJC is a military friendly school and extends our sincere thanks to all veterans for their service to
our country. Summer NRA Courses may be covered under the GI bill if you qualify. Courses must
be taken for credit in order to be covered. For information on how to use your benefits at TSJC,
visit: http://www.trinidadstate.edu/students/financial-aid/veteran-benefits or contact
Misti Stelljes, Associate Director of Financial Aid/Student Loan Specialist, can be reached at 719846-5553 or [email protected] for assistance.
SHIPPING OF FIREARMS
If you need to ship your firearms and/or tools to the school, they should be addressed to yourself in
care of the school. The firearm will be received in our mail room and given to the Gunsmithing
Department to place in the gun vault. If you ship through UPS or FedEx, and get a pre-paid
shipping label, you will be able to ship the gun back through our mailroom. If you do not get a prepaid label, you may take the firearm to the local UPS center – UPS’s only receives packages for
shipping between 4:30 and 6:00 p.m.
Please address your package to the school as follows:
Attn: John Doe, NRA Student
600 Prospect Street
Trinidad, CO 81082
Handguns must be shipped by overnight air.
If you have any questions about shipping firearms, please call David Walker in the tool room at
719-846-5469.
The College mailroom is located on the first floor of the Berg Building.
10
The NRA Foundation Scholarship Application
Summer NRA Program Students
The NRA Foundation has provided funding for the purpose of providing tuition
assistance in the form of needs-based scholarships to students studying at Trinidad
State Junior College in the Summer NRA Program to afford students the opportunity
to achieve their educational dream.
Scholarships will be awarded to students meeting the following criteria:
1. Enrolled in the Summer NRA Program working toward the Gunsmithing
Technician Certificate;
2. Individual having a recognized financial need;
3. Recommendation from someone, other than a relative, who can vouch for the
student; and
4. Based on recommendation by scholarship review committee
Students must remain in good standing at TSJC.
To complete an application for consideration, you must submit ALL of the following
items:
1. An essay explaining your financial need or crisis.
2. A copy of your income tax returns for 2014 or FAFSA financial aid
application.
3. A letter of recommendation from a mentor, high school instructor or counselor,
employers, etc. (letters should not come from relatives)
Applications will be reviewed by a scholarship review committee who will make
recommendations based on the materials submitted by scholarship applicants.
Students chosen for an award will be required to send a formal letter of thanks to The
NRA Foundation and will be required to attend the weekly NRA Program awards
dinner held on Thursday night each week during the Summer Program
(application form on next page)
11
THE NRA FOUNDATION
SCHOLARSHIP APPLICATION
Completed application forms should be submitted to Donna Haddow, Trinidad State Junior College,
600 Prospect Street, Trinidad, CO 81082 no later than 5 p.m., April 29, 2016
Name of Applicant ______________________________________________________
Student ID # ______________________________Birthdate: _____________________
(or Social Security #)
Home Address __________________________________________________________
City ______________________________ State ___________ Zip _______________
Local Address ___________________________________________________________
Phone Number _______________________________________
Email address ___________________________________________________
Attach:
 Essay explaining financial need or crisis
 Copy of FAFSA financial aid application or copy of your income tax returns for 2013
 Letter of recommendation from a mentor, high school instructor or counselor, employers,
etc. (letters should not come from relatives)
For College Use
Received:
____ Essay
____ Financial Information
_____ Letter of Recommendation
Date of NRA Scholarship Meeting: ________________________
Application is approved ________ denied _______ by NRA Foundation Scholarship Committee
Signature of College Official ________________________________________ Date
___________________
12
BILL PRATOR GUN RANGE
The pistol and rifle range will be available for summer NRA students
while attending NRA classes– A $5.00 fee will be due for trap or skeet
shooting for each 25-pigeon session.
Contact Andrew Orta, Director of Gun Range Operations,
at (719) 680-7236 to arrange for shooting times
The range is located at 42013 County Road 24.6. From downtown Trinidad go east on Main
Street to Grey Creek Road (County Road 24.6) and turn south for six miles.
http://www.trinidadstate.edu/gunsmithing/prator.html
13
Trinidad State Junior College-- 2016 class schedule
Classes listed in green apply toward the Gunsmithing Fine Arts Certificate
Classes listed in Red are required for the Gunsmithing Technician Certificate
SRHS = Southern Rockies Heritage School workshops
May 17
Glock Armorer’s class – register with Glock Training
Glock Staff
Boyd TCRM
May 30 – June 3
Intro to Gunsmithing
Ryan Newport
Mullen 106
Checkering
Glen Morovits
Mullen 101
Basic Machine Shop
Bill Sturtevant
Mullen 211
Reloading A-Z
Rich Machholz
Mullen 306
Basic Drawing
Richard Thompson
SRHS
Beginning Blacksmithing June 1-3
Mike Kernor
Prator Range
SRHS
Organic Blacksmithing June 4-5
Mike Kernor
Prator Range
June 4-5
Weekend Machining Lab
Mike Wygovsky
Mullen 211
June 4-12
Take Down Lever
Lee Hadaway
Mullen 206
June 6-10
Knifemaking
Glen Morovits
Mullen 101
Bill Sturtevant
Mullen 211
Dr. Michael Pierson
Mullen 414
Revolver Tuning
Keith Gipson
Mullen 306
Vintage Metal Finishing
Chuck Grace
Mullen 106
SRHS
Basic Stained Glass
Kathy Longanecker
June 11-12
Mike Wygovsky
Mullen 211
June 13-17
Sporterizing Military Bolt Actions
Bill Sturtevant
Mullen 101
Dr. Michael Pierson
Mullen 414
Action Blueprinting
John McLaughlin
Mullen 211
Mike Taunt
AR 15
John Holliger
Mullen 206
Experiments in Color Case Hardening
Ryan Newport & John Seim
Mullen 106
SRHS
Leather Holster Making
Bob Calkins
Berg 401
June 20-24
Advanced Welding for Gunsmiths
Mike Taunt
Mullen 106
1911 Race Guns
Steve Pitt
Mullen 211
Introductory Hand Engraving & Alumni/Special Projects
Dr. Michael Pierson
Mullen 414
Double Guns week 1
Dennis Potter
Mullen 101
Metalsmithing Single Shot Rifles week 1
Glenn Fewless
Mullen 206
Brownells 1911 Course and Customization
Mike Watkins
Mullen 306
SRHS
Gun Leather II
Bob Calkins
June 27-July 1
1911 Race Guns continued
Steve Pitt
Mullen 211
Bluing
Ryan Newport
Mullen 106
Metalsmithing Single Shot Rifles week 2
Glenn Fewless
Mullen 206
Introduction to Gunsmithing for Women
Sheila Miles
Mullen 306
Double Guns week 2
Dennis Potter
Mullen 101
June 13-19
14
Berg 301
Berg 401
Banta
Berg 401
Basic Machine Shop
Bill Sturtevant
Mullen 211
Stockmaking week 1
Clayton Nelson
Mullen 101
July 9-10
Mike Wygovsky
Mullen 211
July 11-15
Bill Sturtevant
Mullen 211
Spring Piston Airgun
Randy Bimrose
Mullen 306
Stockmaking week 2
Clayton Nelson
Mullen 101
Benchmetal Hand Tools & Metallurgy
Fred Weisenborn
Mullen 106
CAD/CAM 2D
Joel Sturtevant
Mullen 206
Scrimshaw
Jim & JT Stevens
Mullen 414
Hat Making
Tom Hirt
Mike Taunt
Classic Match Airguns
Randy Bimrose
Alternative Finishes
Lee Hadaway
Mullen 106
Spurs
CNC Lathe & Mill week 1 (you must take both weeks of this
Buddy Knight
Mullen 306
class)
Joel Sturtevant
Mullen 206
Gunstock Carving
Jack Brooks
Mullen 414
SRHS
Powder horns
Jim & JT Stevens
July 18-20
Small Business Management with an ATF Emphasis
Bill Sturtevant
Boyd TCRM
July 25-29
Accurizing the 1911
Ryan Newport
Mullen 306
Jon Birkhold
Mullen 211
SRHS
Relining the .22 caliber firearm
Three Piece Buckles
July 4-8
SRHS
July 18-22
SRHS
Banta Building
TBD
TBD
Buddy Knight
Mullen 106
CNC Lathe & Mill – 2 week of required 2 weeks
Joel Sturtevant
Mullen 206
Decorative metal inlay in wood
Jack Brooks
Mullen 414
nd
SRHS
Berg 401
PLEASE VISIT http://trinidadstate.edu/gunsmithing/nra_courses.html FREQUENTLY FOR UPDATES ON NEW
CLASSESAND CLASS CANCELLATIONS
15
SUMMER 2016
NRA FIREARMS SAFETY INSTRUCTOR COURSE SCHEDULE
Course Title
Date
June 6
NRA Home Firearm Safety
June 7 – 8
NRA Basic Pistol Shooting
June 9-10
June 13
NRA Basic Muzzleloading Pistol Shooting
Basic Instructor Training and NRA Home Firearm Safety
Instructor
June 14-15
NRA Pistol Instructor Training
June 16 - 17
NRA Muzzleloading Pistol Instructor Training
June 20
Range Safety Officer
June 21-22
NRA Basic Rifle Shooting
June 23-24
NRA Basic Muzzleloading Rifle Shooting
June 27
June 28
Refuse To Be A Victim
Instructor
June 29-30
NRA Basic Rifle Instructor Training
July 6-7
NRA Basic Muzzleloading Rifle Instructor Training
July 9-10
NRA Basic Pistol Shooting (Saturday & Sunday)
July 11
Range Safety Officer
July 12-13
NRA Basic Shotgun Shooting
July 14-15
July 18
NRA Basic Muzzleloading Shotgun Shooting
Instructor
July 19-20
NRA Basic Shotgun Instructor Training
July 21-22
NRA Basic Muzzleloading Shotgun Instructor Training
July 23-24
NRA Basic Pistol Shooting (Saturday & Sunday)
16
Location
Mullen
412
Mullen
412 **
Mullen
412 **
Mullen
412
Mullen
412 **
Mullen
412 **
Mullen
412
Mullen
412 **
Mullen
412 **
Mullen
412
Mullen
412
Mullen
412 **
Mullen
412 **
Mullen
412 **
Mullen
412
Mullen
412 **
Mullen
412 **
Mullen
412
Mullen
412 **
Mullen
412
Mullen
412 **
Time
1 p.m. to 5 p.m.
8 a.m. to 5 p.m.
both days
8 a.m. to 5 p.m.
both days
8 a.m. to 8 p.m.
8 a.m. to 5 p.m.
both days
8 a.m. to 5 p.m.
both days
8 a.m. to 6 p.m.
8 a.m. to 5 p.m.
both days
8 a.m. to 5 p.m.
both days
1 p.m. to 5 p.m.
8 a.m. to 8 p.m.
8 a.m. to 5 p.m.
both days
8 a.m. to 5 p.m.
both days
8 a.m. to 5 p.m. Sat
1 p.m. to 6 p.m. Sun
8 a.m. to 6 p.m.
8 a.m. to 5 p.m.
both days
8 a.m. to 5 p.m.
both days
8 a.m. to 8 p.m.
8 a.m. to 5 p.m.
both days
8 a.m. to 5 p.m.
both days
8 a.m. to 5 p.m. Sat
1 p.m. to 6 p.m. Sun
** Part of this course will be held at Prator Range. Students should report to the Boyd Building the first day and will be
provided with further instructions.
Refuse to be a Victim does not count toward the certificate.
Instructor Websites/E-mail addresses
We are also grateful for the following instructors who continue to take time year after year to pass their knowledge on to
others:
Jim Stevens www.scrimshawstudio.com or [email protected]
John Holliger www.whiteoakarmament.com or [email protected]
Dennis Potter [email protected]
Chuck Grace [email protected]
Glenn Fewless [email protected]
Dr. Michael Pierson [email protected]
Clayton Nelson [email protected]
Rich Machholz www.sierrabullets.com or [email protected]
Keith Gipson [email protected]
John McLaughlin [email protected]
Ryan Newport [email protected]
Mike Taunt [email protected]
Randy Bimrose [email protected]
Bob Calkins [email protected]
Frank “Buddy” Knight [email protected]
Fred Weisenborn [email protected]
Glen Morovits [email protected]
Bill Sturtevant [email protected]
Lee Hadaway www.thearmsroom.com/index.html or [email protected]
Jon Birkhold [email protected]
Jack Brooks [email protected]
Steve Pitt [email protected]
17
Summer nra 2016 course descriptions
We have included lists of the minimum tools required for each class
within the course descriptions below. Because of the variety of student
projects, it is impossible for us to list all tools you may need. If you
believe you may need something else, please bring it with you. The TSJC
bookstore carries many tools. For a list of tools available in the
bookstore, visit
http://www.trinidadstate.edu/pdf/students/bookstore/Gunsmithing_ToolList.pdf
Machine Shop Lab
$150 per weekend
Open Machine Shop Lab is for students with machining experience. This will be
a lab only class with a minimum of formal instruction. Students should bring
their own tools, projects, and materials.
Labs are scheduled for the weekends of June 4-5, June 11-12, and July 9-10;
however, if there is enough demand, we will add additional weekend sessions.
Instructor: Mike Wygovsky
WEEK ONE May 30-June 3
Introduction to Gunsmithing $380 or 2 credits
This course will cover operational theory, disassembly and assembly, proper use of hand tools and
precision measuring instruments, and an introduction to basic bench work of the Gunsmithing trade.
Consideration will be given to minor gun repair and the installation of firearm accessories. A brief
study of Federal Firearm Law and record keeping will be included. Students should bring some type
of project to work on during lab times under the supervision of the instructor. Students may bring
projects related to the scheduled topic outlines. For other projects, please contact the instructor,
Ryan Newport.
Ryan Newport is an alumni of Trinidad State Junior College. After graduation he spent 6 years
working as a repair gunsmith on the high end line of Browning shotguns, since that time he has
18
returned to TSJC as an instructor teaching Benchmetal, Firearms Conversions, Shotgunsmithing,
Bluing, and several Machine Shop classes. [email protected] office # 719-846-5525
Ryan Newport
Introduction to Gunsmithing
Tool List
Safety Glasses - OSHA Approved
Screwdrivers - miscellaneous assortment designed to fit gun screws
Small Hammer - 4oz brass or metal
Small pin punches
Metal files - assortment of small and medium metal cutting
File Handles - one to fit each file
Hand Grinder - (suggested but not mandatory)
Cutters for hand grinders - misc. assortment of metal and stones
Dial Caliper - 6"
Steel 6" Rule
3" wide Vise Jaws to protect work - (1/4" plywood lined with cork will do)
File Card
Needle Files
Dental Pick
Pliers w/side Cutters
Small tap handle
Hacksaw with medium blade - Note: any of the above tools can be substituted with a like tool from
home. The thing about most gun work is you don't know you will need it until you need it, so you
may choose bring extra tools you find handy. All tools listed can be purchased on campus at the
Trek-Inn Bookstore or through Brownells, Inc. 200 South Front St., Montezuma, Iowa
50171Ordering/Tech Support: 800-741-0015
******************************************************
Checkering $380 or 2 credits
(This course counts toward the Gunsmithing Fine Arts Certificate)
Course includes pattern design and layout, scribing, pattern transfer, checkering techniques, and
finishing. In addition, instruction on the use of the latest hand and power tools is provided.
Glen Morovits grew up along the Mississippi River bluff in southwest Wisconsin. “I usually had a 22LR
in my hands as I was chasing squirrels with the dog. Those early years of hunting turned into a lifelong love
of the outdoors and firearms”. Glen graduated from TSJC in 1981 and went to work for Don and Noma
Allen to build custom rifles. Those were the good old days and the beginning of a 30-year career working in
the firearms industry. He is now teaching stockmaking at TSJC and challenging the next generation to carry
on the tradition.
19
Glen Morovits
Checkering tool list
1-- Checkering and Carving of Gunstocks" by Kennedy (optional)
1-- Dem-Bart S-1 tool with handle
1-- " " F-1 90 deg. cutter
1-- " " C-1 90 deg. cutter
1-- " " 3-20 spacing tool
1-- " " 4-20 spacing tool
1-- " " 2, 3, or 4 line cutter ( optional )
1-- “ “ 2-20 spacing tool
1-- Jointer tool
1-- Dem- Bart 90 deg. vainer
4-- W.E. Brownell full view handle
1-- white or yellow grease pencil
1-- thread pitch gauge or Brownells chekrchex ( optional )
1--no. 2 optivisor (optional )
1--3/4" roll of masking tape
1--small brush ( tooth brush or fingernail brush )
1--small screwdriver
NOTE: All of the above tools and supplies can be purchased At the TSJC bookstore or through
Brownells Inc., 200 South Front St., Montezuma, Iowa 50171 Ordering/Tech Support: 800-7410015 and any can be substituted with something like it you have at home.
The TSJC Bookstore caters to the full-time Gunsmithing students and carries a wide range of books,
tools and parts including their own FFL. To purchase items from the bookstore in advance or to ask
questions, call Sandra Rodman or staff at 1-800-621-8752, ext. 5610.
************************************************************
Basic Machine Shop
$380 or 2 credits
(Core Class for Certificate)
This class offers instruction and hands-on experience in machine tool operation. Students will gain
experience with the metalworking lathe and milling machine in the manufacture of parts and tools.
Bill Sturtevant is a graduate of the Trinidad State Gunsmithing program, Bill joined the full-time
Gunsmithing faculty in August 2014. Bill has owned and operated Bill’s Gun Shop in Pueblo,
Colorado since 1990 and is known for producing quality custom and semi-custom firearms. The
shop has a well-established reputation for completing complex repairs others were not able to
20
do. He has completed several firearms that were used to gain world records in long distance
accuracy. Bill has also performed contract machining for several large manufacturing companies in
Colorado Springs, handling production runs of intricate parts.
Bill Sturtevant
Basic Machine Shop Tool List
Required Tools:
#2 center drill
5/16" or 1/4" HSS lathe tool bit blanks
6" dial caliper or 1" micrometer
6" steel rule
60-degree center gauge
Assorted files with handles
Carbide tipped scribe
Emery cloth: 120, 220, 320 and 400 grit
Layout dye
Safety Glasses
Thread pitch gauge
While not required, assorted hand tools can provide a useful addition:
6" or 8" adjustable wrench
Allen wrench set up to 3/8”
Center punch
Gunsmith pin punch set
Hammer
Pliers
Screwdrivers
Please note that this list is bare minimum. If you have other tools or supplies that may be useful,
bring them. You can never have too many tools.
Contact your instructor to make sure your project will fit our facilities and time restraints
**********************************************************
Reloading A-Z $380 or 2 credits
This class will address all facets of reloading from the basics to the most advanced
techniques. Students should bring their own equipment if convenient and instructor will
concentrate on precision reloading long range preparation, but not limited to that. We will look at
Exterior Ballistics and how bullet shape can influence accuracy. Plus we will follow an informal
format trying to be open to all pertinent questions.
21
Rich Machholz has been a ballistic technician at Sierra Bullets for 21 years and a long range Benchrest
competitor for over half that time.
He began hunting at a very early age and reloading followed shortly thereafter. In the early 1980's he got an
idea, made some drawings, hired an attorney and eventually received a design patent for case spinners. He
resurrected his old Sportsman Supply Company which was a retail sales company but soon developed into a
small manufacturing company building portable shooting tables, rifle rests, target stands and the SSC Case
Spinners. That eventually lead to freelance writing and later yet got him in the door at Sierra Bullets.
[email protected]
Reloading A-Z Tool List
Current reloading manual
1" Micrometer (optional)
6" Calipers
Reloading dies for your caliber of choice.
Bullets for their caliber of choice.
Powder for your caliber of choice.
Primers for your caliber of choice.
Brass for your caliber of choice.
Pad of engineering paper and writing instrument
Reloading tray
Front rest and or appropriate front and rear bags
Bore cleaning equipment
proper eye and ear protection
Rifles or Pistols to check for problems, proper function, and to shoot later in the week providing the
weather is good.
*********************************************************
Basic Drawing $300 or 2 credits
This course investigates the various approaches and media that students need to develop drawing
skills and visual perception. The course is designed to benefit both the Gunsmithing Fine Arts
students and students wanting to learn or improve their drawing skills.
TOPICAL OUTLINE:
I.
Media and Processes
A.
Traditional two-dimensional media and processes
B.
Illustration, decorative flourishes and motif
II. Visual Elements
A.
Line
B. Shape
C. Value
D.
Texture
22
E.
Space
F.
Linear and Spatial Perspective
III. Principles of Composition
A.
Balance
B. Scale
C. Proportion
D.
Movement
E.
Dominance
F.
Harmony, Rhythm and Repetition
G.
Unity and Variety
IV. Subject Matter
A.
Representational Nature (Ex. Deer, Elk, Bear, Tiger, Pheasants, Flowers & Leaves)
B. Abstract (Still Life)
C. Pointillism
D.
Historical Perspective
V. Presentation Portfolio
A.
Reference Sketches, Tracings and Studies
B. Critique
Richard Thompson: For Richard Thompson drawing is a process more than a medium. His passion
for Studio Art, Science and Computer Imaging began as a Fine Arts student at the University of
New Mexico. He received an Applied Science in Computer Programming Degree from UNM and
his Bachelor’s Degree from Indiana University. His continued interest in the Visual Arts and
Sciences has contributed to a one-of-a-kind experience in Studio Art, Computer Aided Design,
Architectural and Civil Map Drafting. As an art instructor he focuses entirely on helping his
students develop their own creativity and improve their craft so each can contribute something
unique to the world.
Richard Thompson
Basic Drawing Art Supply List
Kneaded eraser
Eraser (Mars Plastic)
Three charcoal pencils – Soft, Medium, Hard
One blending stump (tortillon)
One white charcoal pencil
Graphite Drawing Pencils (Tombo Mono) F, H, 2H,3H, HB, 2B, 4B, 6B ),
Color Pencils (Staedtler 12pk)
Four Black Artist Pens (Faber-Castell Pitt Superfine, Fine, Medium and Brush)
Tracing Paper (9 x 12”)
White Drawing Pad (11x 14”) Canson
Toned Gray Sketch Pad (9 x 12”) Strathmore
One roll masking tape
One 12” Ruler
23
***********************************************************
Beginning Blacksmithing $200
June 1, 2, 3
Class will be held at the Prator Gun Range
Students will learn to forge steel by maintaining a coal forge and utilizing a gas forge. Hammering
techniques, tapering, twisting, scrolling, bending and hot cutting using chisels, tongs, anvils, vises and other
tools.
Instructor: Mike Kernor
Safety equipment: Students should wear cotton type of clothing, long pants and enclosed toe shoes, safety
glasses, leather gloves are optional.
Tool list for students to bring: 2-3 LB. ball pein or cross pein hammer, 1/4 & 1/8 V bit-bolt style tongs,
leather or suede type of apron, metal ruler or tape measure, center punch. Where to purchase tools:
Pien Tool: http://piehtoolco.com/
Centaur Forge: http://www.centaurforge.com/
Blacksmithing Depot: http://www.blacksmithsdepot.com/
****************************************************************************************
Organic Blacksmithing $140
June 3, 4
Class will be held at the Prator Gun Range
Students will use the skills learned in beginning blacksmithing to forge items such as leaves, vines, and other
decorative pieces. Prerequisite: Beginning Blacksmithing or previous blacksmithing experience.
Instructor: Mike Kernor
24
Safety equipment: Students should wear cotton type of clothing, long pants and enclosed toe shoes, safety
glasses, leather gloves are optional.
Tool list for students to bring: 2-3 LB. ball pein or cross pein hammer, 1/4 & 1/8 V bit-bolt style tongs,
leather or suede type of apron, metal ruler or tape measure, center punch. Where to purchase tools:
Pieh Tool: http://piehtoolco.com/
Centaur Forge: http://www.centaurforge.com/
Blacksmithing Depot: http://www.blacksmithsdepot.com/
June 4-12, 2016– 9 days, includes weekends
Take Down Lever Actions
**Note – This course will start on Saturday, June 4th and run over the weekend, through
the week of June 6th and end on Sunday June 12th. Students should report to Mullen
206 at 8 a.m. Saturday, June 4th **
The class will run for 9 hours a day in order to meet the
seat time required for a two-week class.
Tuition for continuing ed is $750 for the 9-day course
If taken for credit – course is worth 4 credit hours
This 9-day course is designed to give students hands-on experience in the techniques and skills
needed to convert Marlin lever-actions into takedown rifles. Students should bring their own
firearms to work on. Pre-requisite: Basic Machine Shop or consent of the instructor.
NOTE - This course has been described as being "very intense". Hand skills, parts fitting and
finishing and basic machine skills are a must!!!
Lee Hadaway is a 1990 graduate of the TSJC Gunsmithing Program with an AAS and an
Advanced Firearms Repair certificate. Lee's first job out of school took him to Tulsa, Oklahoma.
There he worked for a shop that performed warranty repair work for most of the Wal-Marts in the
country. He performed warranty repairs for Smith & Wesson, Remington, Winchester, Browning,
Savage, Colt, and Mossberg repairing over 2000 firearms. He later bought into an existing business,
The Ammo Shop, Inc. which included retail sales, gunsmithing, pawn business, commercial ammo
manufacturing, and running the indoor range. Lee also contracted with The Ordnance Depot and
converted 65 Marlin Lever Actions into Takedowns. Eventually he went to work for Scattergun
Technologies and was put in charge of the Rebuild Program and performed the service of rebuilding
ragged out Law Enforcement 870s and 1100s. He performed work for over 200 Law Enforcement
Departments or Agencies, including FBI, DEA, INS, HUD, US Postal Inspectors, Federal Reserve
and US Marshals. In his spare time, Lee provided Gunsmithing services to Game Fair Limited, a
very high end gun shop. This gave Lee the opportunity to work on Purdy, Holland & Holland,
Westley Richards, Parker, and LC Smith side by sides. Lee chose to move back to Trinidad,
Colorado and teach for his old alma mater, Trinidad State Junior College. For 3 years, Lee taught
the Third Year Advanced Firearms Repair Program. He has also regularly taught Blueing,
Winchester High Wall I & II, and Shotgunsmithing. Lee has also taught in the NRA Summer
Program at Trinidad State. His summer classes are Takedown Lever Actions, Tactical Shotguns,
25
Handgun Repair, Long Gun Repair, and Blueing & Metal Finishing. He has operated The Arms
Room since 1999. www.thearmsroom.com
Lee Hadaway
Takedown Lever Actions Tool List
-
Marlin Centerfire Lever Action (used is fine)
Safety Glasses
Assorted Gunsmithing Screwdrivers
Assorted Hand Tools – Pliers, Needlenose, Vise Grip, etc.
Allen Wrenches
10” Flat Smooth File
10” Second Cut File
10” Bastard File
12 – 16oz Dead Blow, Rawhide or other Non-Marring Hammer
Set of Vise Safe Jaws
6” Dial or Digital Calipers
25’ 1 ½” 180 grit Emery Cloth
Most of the above tools will be available at the school bookstore
2 Packages Dremel ½” Sanding Drums, Coarse 60 grit (not available locally)
2 Packages Dremel ½” Sanding Drums, Fine 120 grit (not available locally)
Dremel Tool (not required but you’ll wish you had one)
Brownell’s Magna Tip Marlin 336 Bit Set #080-087-011 $10.99 (Nice to have but not required)
Ball Detents will be available from the instructor for $5
You are welcome & encouraged to bring any additional tools you want. There will be extensive
lathe and mill work so feel free to bring any machining tools also. Cutting tools will be available for
use from the tool room if necessary.
** Please feel free to contact Lee at [email protected] 719-680-1255 if you have any
questions.
Lee will have the person who makes his leather cases come by the class so any students who wants a
case can order a custom one
26
WEEK TWO
June 6-10
Knifemaking
$380 or 2 credits
In this course each student will make a full-tang fixed blade knife. We will use hand tools almost
exclusively. Because of this and the short duration of the course it is necessary that we restrict the
size of the knife that you will make. Your design must have a blade less than 4" in length and 1 1/4"
in width, not including the handle.
The entire design, handle and all, must fit within an 8" x 1 1/2" rectangle. I have no problem with
larger knives, but the size restriction is in the interest of your success. If you design and make a
smaller blade you will be able to sit back and smile while the guy with the big knife is struggling to
get finished. When it comes to first knives, SMALLER IS BETTER!!
Glen Morovits grew up along the Mississippi River bluff in southwest Wisconsin. “I usually had a 22LR
in my hands as I was chasing squirrels with the dog. Those early years of hunting turned into a lifelong love
of the outdoors and firearms”. Glen graduated from TSJC in 1981 and went to work for Don and Noma
Allen to build custom rifles. Those were the good old days and the beginning of a 30-year career working in
the firearms industry. He is now teaching stockmaking at TSJC and challenging the next generation to carry
on the tradition.
Glen Morovits
We will use 440C stainless steel for the blade and brass or nickel-silver for bolsters and pins. For
your first knife I recommend brass for bolsters and pins as it is easy to work and solder. If you want
to use nickel-silver or (Heaven forbid) stainless steel for your bolsters and pins, those materials can
be used as well. They are available from the knife suppliers in 12" lengths. You will need 3/4" x
1/4" flat stock for the bolsters, 1/8" round stock for the bolster pins, 1/4" or 3/16” round stock for
the handle pins, and 1/4" OD x 3/16" ID tube for the thong hole liner if desired.
Tools/Supplies needed:
1 pr.
Safety Glasses or Goggles
1
Dust Mask
1
6" Steel Rule
2
Machinist's Parallel Clamp 3"
1
Carbide Tipped Scriber
1
Layout Dye (Dykem brand preferred)
1
Magic Marker blue or red
27
4
1
2 sheets
1
1
1
1
Diemakers Polishing Stones 1/4" x 1/2" x 6"
(1 each 150, 240, 320, and 400 grit aluminum oxide)
MSC #05093513, 05093521, 05093539, and 05093547
Small Bottle of Baby Oil - for use with polishing stones
each 400 and 600 grit Wet or Dry Sanding Paper
8" OO cut Regular Pillar File
6" Second Cut Mill File
6" Second Cut Half Round File
8" Round File
(New files are a must. Buy good files, the ones at the discount store
are a source of great frustration.)
File Handles - one for each file you have
Knife Materials:
Knife Blade Steel precision ground 440C stainless
1 each 1/8” x 1 ½” x 18” Jantz #CG718
This will make at least two blades
Brass or Nickel-Silver Bolster and Pin material – Texas Knifemakers Supply
1 each ¼” x ¾”x 12” barstock
1 each 1/8” x 12” roundstock
1 each ¼” or 3/16” x 12” roundstock
Knife Handle Scales (Your Choice– Dymondwood, Micarta, or Stabilized Wood)
1 pair standard size 1 1/2" x 5" x 1/4"
This list reflects minimum tool requirements. If you have other tools or supplies that may be useful,
bring them.
Some reliable vendors are:
Tools:
MSC Industrial Supply Co.
www.mscdirect.com
800-645-7270
Knifemaking Supplies:
Texas Knifemakers Supply
www.texasknife.com
713-461-8632
Jantz Supply
www.knifemaking.com
800-351-8900
Leatherworking Tools and Supplies:
Tandy Leather Factory
Tandy has stores across the country
Check your Yellow Pages or
www.tandyleatherfactory.com
If finances are not a problem or if you plan on making knives as an active hobby or sideline
business, these items will prove useful.
1
Artificial Sinew natural color Tandy #3609-00
1pkg Easy-Thread Needles Tandy #1195
1
Eco-Flo Super Shene Tandy #2610-01
28
1
1
1
1
1
1
1
1
1
1 set
10ft.
Feibings Leather Dye your choice of color (for example brown is Tandy #2100-03)
Stiching Pony Tandy #3132-00
Exacto Craft Knife w\ blades
Bevel-Eze Edge Beveler size #2
Tandy #8076
Adjustable Gouge
Tandy #8082-00
Overstitch Wheel size #6
Tandy #8079
Stitching Awl Tandy #31218-01
Mighty Mag MSC #76580455
4" Hermorphadite Caliper
Diemakers Polishing Stones
MSC #05094750
(in place of the polishing stones listed above)
Abrasive cloth roll 180 and 320 grit 1 1/2" width
I have tried to make these lists as complete as possible, however I am sure that I have overlooked a
number of items. If you have other tools and can bring them with you by all means bring them!
*******************************************************
Advanced Machine Shop (Core class for certificate)
$380 or 2 credits
This class will provide further instruction and practice on machine tool operation. The students will
be instructed in rifle barrel re-barrel techniques as well as some advanced machine shop operations.
Projects will vary according to individual interests. PREREQUISITE: Basic machine shop or
consent of instructor.
Bill Sturtevant
Advanced Machine Shop Tool List
Barrel fitting requires that you provide one pre-contoured barrel, and an action that suits the class
project. If you have more needs or would like to include something else, bring two. Call if you think
you want other instruction.
29
Required Tools:
#2 or #3 Center drill
1/2 ", 4 Flute double end mill
5/16" - 3/8" HHS tool bits (and/or appropriate turning and facing carbide bits)
6" Dial caliper
6" Steel rule
60° Thread center gauge
Assorted files (with handles)
Carbide tip scribe
Emery cloth: 80, 120, 240, 320, 400 grit
Layout dye
Safety glasses
Thread pitch gauge
6" or 8" Adjustable wrench
Allen wrench set up to 3/8"
Center punch
Gunsmithing pin punch set
Gunsmithing screwdrivers
Hammer
Pliers
Tool box
******************************************************
$380 or 3 credit hours
**Note** In order for this course to meet the requirements for the Gunsmithing Arts
Certificate, classes will run longer each day. Students should report for orientation at 8
a.m. Monday morning. Dr. Pierson will discuss extended class time at the beginning of
the course.
This course covers basic concepts and skills related to hammer and chisel engraving. Special
emphasis will be placed on tool sharpening, pattern theory, designing, transferring, and cutting
patterns.
Dr. Michael J. Pierson has been an academic administrator and taught technical subjects in a
university setting for over 35 years. He has been engraving for 24 years, was trained by Frank
Hendricks, and is a member of the Firearms Engraver’s Guild of America. He is proficient with
both the hammer and chisel and pneumatic engraving techniques and a wide variety scroll patterns.
30
Dr. Michael J. Pierson
Tool List
Required tools and supplies:
1.
Chasing hammer, 1-1/8" face from NGraver or GRS
2.
Four 3/32” carbalt XD blanks from Lindsay
3.
#7, #12, #20 straight liners in standard width from NGraver or #18-10 and
#24-10 straight liners from GRS
4.
Steel ruler, 6 inch
5.
Dividers
6.
Scribe
7.
Ellipse template #20750 from Drafting Steals
8.
Circle template #20724 from Drafting Steals
9.
Stabilio # 8008 pencilfrom Amazon
10.
Curved burnisher from Amazon
11.
Dot punch set, No. 1,2,3 from NGraver or beading tool #10, #15, and #22
from GRS
12.
Optivisor, #3 lens from GRS
13.
Talcum powder
14.
Clear packaging tape
15.
Money clip, nickel silver spring tempered from Ngraver
16.
One tube of oil based black etching ink from Faust or Eckersleys
17.
Stainless tool holder for 3/32” graver blanks from Lindsay
18.
Wet/dry silicon carbide sandpaper (220,320, & 400 grit)
19.
Palm push adjustable length graver from Lindsay
20.
3/16” brass punch from MSC
21.
3/16” steel punch from MSC
22.
Carbide bur set #004-511 from GRS
Contact information for tool and supply sources:
GRS Tools
Web site: www.grstools.com
The Ngraver Company
Web site: Ngraver.com
Lindsay Engraving and Tools
Web site: Lindsayengraving.com
31
Rudolph Faust, Inc.
Web site: faustink.com
Eckersley’s Arts and Crafts
eckersleys.com
MSC Industrial Supply
Web site: mscdirect.com
OUTLINE OF COURSE CONTENT:
I.
Engraving tools
A.
Types
B.
Sharpening
II.
Pattern theory
A.
Spiral type
1.
Circular
2.
Elliptical
B.
Spiral characteristics
1.
Corridor type
a.
True corridors
b.
Holding corridor
2.
Relationship to other spirals
a.
Common stem spirals
b.
Overlaid spirals
C.
Spiral measurements
1.
Spiral height
2.
Corridor height
3.
Extension length
4.
Standoff
5.
Number of turns
6.
Angle of departure
D.
Leaf anatomy
1.
Leaf types
a.
Adjacent
b.
Separated
2.
Leaf parts
a.
Sweeps
b.
Buds
c.
Lobes
3.
Leaf measurements
a.
Leaf height
b.
Stem thickness
c.
Sweep height
d.
Bud height
e.
Leaf meter
f.
Leaf width
g.
Leaf separation
III.
Designing patterns
32
A.
B.
IV.
Selecting scroll style
Laying out the pattern
1.
Outline the panel
2.
Establish the panel’s center line
3.
Draw planning circles
4.
Establish point of origination
5.
Establish scroll height, corridor height, and rate of turn
Cutting patterns
A.
Hammer and chisel or chasing method
B.
Borders
C.
Lining
D.
Backgrounds
1.
Flush
2.
Relief
E.
Transfer plates
F.
Transfer techniques
*********************************************************
Revolver Tuning $380 or 2 credits
This course will incorporate basic double action revolver function, trouble shooting, timing, and
action tuning during a one-week course. Emphasizes Smith and Wesson, Colt Python types or
others. Students bring their own revolvers to fine tune.
Keith Gipson has been a full-time Gunsmithing instructor at TSJC since 1987. Keith is an experienced
machinist and gunsmith who specializes in gun repair, metalworking and CNC programming.
[email protected]
www.trinidadstate.edu
http://nra.trinidadstate.edu
Home Phone (719) 846-7954
Keith Gipson
Tools and Supplies
Assorted Gunsmithing Screwdrivers
Gunsmith Pin Punch Set
Gunsmithing Bench Block (if you do not have a bench block, bring a hockey puck)
Hex Wrench Set (if your gun has hex head screws)
Knife Edge India Stone 4” Fine
Small Hammer (4oz ball pein, or something similar)
Spring Kit for your revolver (if needed; if in doubt call me)
Square India Stone ½ “ x ½” x 6” Fine
33
Triangular India Stone 4” Fine
If your gun is really tired you may need some new parts, for example hand or cylinder stop.
Bring whatever else you have that you think would be helpful. Better to have it and not
need it than to need what you left at home.
The School should have all of the specialized tooling that we are likely to need, so don’t
buy a lot of expensive stuff just for this class.
**********************************************************
Vintage Metal Finishing $380 or 2 credits
May be taken toward the Gunsmithing Fine Arts certificate in place of
Learn the art of Guild quality vintage metal finishing from Chuck Grace, President of the American
Custom Gunmakers Guild. A one-week course covering the correct procedures employed to
“French Gray” & “Rust” blue vintage and modern firearms as well as other vintage finishes.
Chuck Grace is a charter member of the American Custom Gunmakers Guild. He has been making
stocks and custom firearms since 1974 and is a 1973 graduate of Trinidad State Junior College.
[email protected] (home)
Chuck Grace
A MESSAGE FROM THE INSTRUCTOR: The Vintage finishing class will involve metal finishes on
guns appropriate to High grade firearms of a by-gone era and what top grade metal smiths are using
today on Modern guns. Over half of the class time will be taken up with the preparing of the metal. Hand
filing and polishing of parts, then on to the actual coloring of the metal. Rust bluing, both express and
slow rust and nitre bluing. And finally polishing out actions bright after all bluing is done and fire arm is
assembled.
Vintage Metal Finishing materials list
1.Guns to work on. A good example for the week would be a Pre-64 Winchester lever gun.
2.selection of files. Small single cut mill files...6-10 inches long. Set of high quality needle files.
3.Cloth backed metal finishing rolls---80, 120, 220, 320 grit. 2 inches wide.
4.Rubber backing blocks. WOODCRAFT and WOODWORKERS SUPPLY sell a set of various
shaped neoprene blocks for backing the grit cloth. Plus go to Walmart and pick up a half dozen soft
pink erasures. These can be shaped to suit.
5.Tools to assemble-disassemble your gun.
6. If you have one...a dremel tool hand grinder with the set of stones.
7. Small propane torch and lighter
34
This class is not designed for high production. Don't bring 5 or 6 firearms and expect to get them all
done in a week. The hot-bluing class is the place for this. 99 percent of metal finishing will be done
by hand. We will use a flat backed belt sander occasionally where we can pick up speed but the
concave-convex surfaces will be done by hand. Chuck Grace 719-846-9435
[email protected]
***********************************************************************
Basic Stained Glass
Each section of this class is Class limited to 10 students
Section 1: Beginning Stained Glass Class--June 6, 7, 8
8:00 a.m.-5:00 p.m. Tuition $100
Section 2: Continued/Intermediate workshop-- June 9, 10 8:00 a.m.-5:00 p.m. Tuition $60
In this class you will learn the basic techniques of working with stained glass. We will begin with a
12” octagon stepping stone, and 8x10 copper foil panel. I have many patterns to choose from. You
will learn to lay out patterns, cut glass, grind edges, wrap copper foil, solder (no experience
necessary), and apply patina. We can make as many projects as time and glass allow. I will bring
additional supplies and glass you can purchase from me.
The class will be set up in two sections. Beginning students will come the first three days. A
separate class will be held on Thursday and Friday for those who want to continue from the
beginning of the week or for students who already have stained glass experience and would like to
join the group.
Kathy Longanecker
Tools and supplies:
Glass grinder with eye shield
Temperature controlled soldering iron
Soldering iron stand
Oil filled carbide cutter
7/32 copper foil
7/32 black backed foil
Plastic burnisher
Breaker/grozier pliers
Running pliers
Flux
Flux brush
35
1 lb. solder
At least 12 pcs. 6”x12” stained glass, variety
I have found these in The Best Beginner Kit at http://www.anythinginstainedglass.com for $299.95.
The shipping is around $35.00. It’s the best price I’ve found, and I prefer the studio grinder to the
gryphette, as it has a larger workspace, and eye shield.
You will also need to bring:
Safety glasses
Scissors
Apron, or old shirt
Old hand towels
Week 3 June 13-17
Action Blueprinting
Class will run from June 13-19, 2016 (week plus weekend)
$525.00 or 2 credit hours
Focuses on the study of the necessary modifications to convert the standard bolt action into a
varmint, bench rest, or match rifle action. Emphasizes the re-machining of the main line and lock up
areas of the action. These operations create a straight action concentric to its bore. Lab work will
consist of building specialized tools and fixtures and re-machining of actions and bolts.
Prerequisite – Basic and Advanced Machine Shop or Machine I at TSJC
John McLaughlin has an AAS Degree in Gunsmithing 1994-1995. Third- year certificate 1996. Owner
of Crossfox Firearms 1998-2007. TSJC instructor 2008-2014. Owner of McLaughlin Firearms 2011Present. [email protected]
John McLaughlin
Action Blueprinting Class Tool List
Remington 700 action or a Winchester 70
Pre contoured barrel of choice.
Reamers of most standard SAAMI spec. Calibers are available at the TSJC tool room for your
use. If you have specific dimensions you are trying to meet it is best that you buy or rent a
reamer and headspace gauge to meet your needs.
Dave Kiff at Pacific Tool & Gauge offers a student discount.
6” quality dial calipers.
1” quality micrometer.
Depth micrometer (blade style)
1)
Two 1/4” high speed blank lathe bits.
2)
One 5/16” high speed blank lathe bit.
3)
Calculator and notepad.
4) Thread pitch gauge
36
5) One set of feeler gauges.
6) Set of allen wrenches .050 to 3/8.
7) 1” dial indicator (0.001” or .0005” resolution)
8) Dial test indicator (.0001” or .0005” resolution)
9) Magnetic base
10)
Mighty mag
11)
PTG mediumSako extractor,#38 drill bit, and 11/64” endmill
12)
Safety glasses.
Please contact instructor prior to class at [email protected]
*********************************************************
Sporterizing Military Bolt Actions
$380 or 2 credits
In this course each student will work on converting a military type action like the 98 Mauser or
1903 Springfield into a custom sporterized action by doing conversions of the bolt handle, safety,
drilling and tapping for scope mounts, floor plate latches, feed work and metal preparation for
stocking. Because of the short duration of this course and the time needed to do many of the
alterations I suggest that you purchase needed materials for the conversion that you wish to perform.
Some pieces can be made without much loss of time while others can be time consuming to
produce. I am enclosing a list of topics which will be discussed and can be performed. Which ones
and how many you choose to complete depends solely on your skills upon entering the class and
your progression through each task. Most of the tasks can take 2 to 4 hours minimum to complete
for a trained gunsmith so plan your time wisely.
Bill Sturtevant
Lesson Topics
Bolt Handle
Forging
Cut and weld
Weld on new handle (need a bolt handle to install)
Bolt Lapping
37
Safeties
Wing (FN style)
Swing (Mod. 70 style)
Trigger Block safeties (Installed in new commercial trigger with
Safety included)
Feed work
Contouring of trigger guard and install floor plate latch
(Latches can generally be produced in class)
Drilling and tapping (need to have mounts to install)
NOTE: see thru scope mounts are not recommended!
Trigger Adjusting (Need to have new commercial trigger, Military trigger are
not recommended for a nice, safe trigger)
Tool List
Some needed tooling and materials for discussed conversions will be supplied such as drill bits,
taps, dies, welding rod, brazing rod, and lapping compound. Any other supplies and parts needed
will be the responsibility of the student.
Screw Drivers - miscellaneous assortment to fit gun screws
Small Hammer -4oz. brass or steal
Small Pin Punches - to remove pins
Metal Files - misc. assortment
Hand Grinder - ( suggested not mandatory )
Cutters for Hand Grinder - misc. assortment of metal and stones
Dykem Layout Die
Dial Caliper 6"
Steal 6" rule
3" wide Vise Jaws to protect work ( 1/4" plywood and cork work fine)
Needle Files
File Card
Pliers w/side cutter
Emery Cloth - misc. assortment for polishing metal
Small Tap Handle
Hacksaw with med. Blade
NOTE : Any tools, materials and supplies can be supplemented with a like tool from
home or can be purchased on campus at the trek in bookstore or through Brownells Inc. 200
South Front St., Montezuma, Iowa 50171 PH. # 515-623-5401
*********************************************************
**Note** In order for this course to meet the requirements for the Gunsmithing Arts Certificate,
classes will run longer each day. Students should report for orientation at 8 a.m. Monday
morning. Dr. Pierson will discuss extended class time at the beginning of the course.
38
This course covers advanced concepts and skills related to push engraving and hammer and chisel
engraving. Special emphasis will be placed on scroll types, precious metal inlay, bulino and
banknote engraving, restoring engraving, and lettering. Students should complete the Introductory
Hand Engraving course prior to enrolling Advanced Hand Engraving.
Tool List
Engraving Course Tool List
1.
2.
3.
4.
Steel ruler, 6 inch
5.
Dividers
6.
Scribe
7.
8.
9.
10.
11.
from GRS
12.
13. Talcum powder
14.
15.
16.
17.
18.
19.
20.
39
21.
22.
GRS Tools
The Ngraver Company
Rudolph Faust, Inc.
eckersleys.com
************************************************************
Welding for Gunsmiths $380 or 2 credits
(core class for certificate)
This course will cover basic safety and hands-on instruction will be provided to introduce the
student to various welding practices used in the art of Gunsmithing. Fabrication and repair of small
metal fixtures and parts related to the gunsmith will be highlighted. If time allows, other types of
welding may be covered by the instructor.
Mike Tauntworked as a precision tig welder in the art and architectural metal fabrication industry for over
22 years. With experience in welding most metals including bronze, brass, steel, aluminum and stainless steel
and is a proud graduate of the gunsmithing program at TSJC.
Mike Taunt
40
Basic Welding Tool List
Students should bring their own firearms for welding repairs
Safety glasses
Leather gloves for TIG welding (thin Goat skin)
Welding helmet (self-darkening is best)
Cotton shirt
Blue jeans okay
Pliers
Vice Grips
Stainless Steel
Brushes
No nylon clothing or jackets
Drop light
Small bench vise, nothing too big.
Small metal grinder with sanding and metal grinding disc's (4 1/2 in. or a 2 in. air grinder) would be
a good thing to have. You will need to supply your own discs.
*********************************************************************
High Power Competition AR-15- from Building to Shooting
$380 or 2 credits
This class will cover the techniques and methods used to build and maintain competition match rifle
AR-15’s. During class you will build a complete upper. Topics covered will include barrel
chambering, barrel installation, assembly, sights and triggers.
Prerequisites: Familiarity with AR-15
Audience: Highpower shooters, aspiring highpower shooters, and gunsmiths, armorers and
hobbyists interested in highpower competition AR-15s. This is not an armorer’s class.





During class you will chamber, gas port and crown a barrel.
Fit and assemble a complete upper.
Students can bring their own lower or build one in class. If building one in class the student
must provide the stripped lower receiver.
Cover the guns and techniques used in Highpower Competition.
At the end of the week you will have the opportunity to put your new upper to the test at the
NRA Whittington Center with a brief high power clinic conducted by John Holliger.
John Holliger is the owner of White Oak Arms, Inc. and has been a competitive shooter since
1985. He has won numerous state and regional titles as well as winning the National Civilian
Service Rifle title in 2000. John has been building AR-15 full time since 2001 with his work
winning many state, regional and national titles and setting several national records. White Oak has
become the leader in match AR15s and barrels for the competitive high power shooter.
[email protected]
www.whiteoakarmament.com
41
John Holliger
Students will be required to purchase a kit from one of the following suppliers, which contains all
the parts needed to build your upper in class. If not purchasing an approved kit from the list below,
instructor approval is required. You may build a service upper, match upper or varmint upper.
Kits may be purchased from:
White Oak Armament – Service, Match, Varmint
Compass Lake Engineering – Service or Match
Keystone Accuracy - Match upper kit in 6mm or Service Rifle
Recommended Tool List:
Roll Pin Punches, 3/32, 1/16, 5/64, 3/16
Drive Pin Punches, 1/16, 5/64, 1/8
Hex wrenches, .050, 1/16, 5/64
Action Block
Armorers Wrench
Strap Wrench, a big one
Screwdriver, straight blade
8" adjustable wrench
Front sight adjustment tool
Small hammer
Bigger hammer
Really big hammer, used for making fine adjustments
Lower receiver holding block, goes in magazine well
Other stuff that I'll bring but students can bring as well if available would be 8x36 tap, #29 drill,
loctite #242 and #262. Trigger pull gauge. Gas tube pliers.
If going to the range bring some decent ammo, muffs, glasses, and other shooting equipment. If we
can get to the HP range, then shooting coat and other gear would be in order.
*******************************************************************************
42
Experiments in Color Case Hardening $380 or 2 credits
May be taken toward the Gunsmithing Fine Arts certificate in place of
The goal of this course is to instruct students on some of the variables that affect the case-coloring
process so that they can obtain predictable results when case-coloring. Students will be provided
with a course handout summarizing the process, and will participate in the preparation of a number
of test plates which will be used in experiments to determine the effects of bone/wood charcoal
composition, shielding, metal alloy composition and other factors on the overall coloration. On
completion of the course, a final document will be prepared to use for future reference when
preparing projects for case-coloring.
Ryan Newport is an alumnus of Trinidad State Junior College. After graduation he spent 6 years
Bluing, and several Machine Shop classes.
[email protected]
office # 719-846-5525
Ryan Newport
Volunteer Co-Instructor: John Seim--
John is a retiree with a long involvement in gun repair and restoration. He has attended in the NRA
Summer Program for more than 25years and has used that knowledge in his daily practice. Casecoloring is another gunsmithing technique that adds beauty and value to any fine firearm, and
should be understood based on scientific principals rather than alchemy. We hope to use some of
the information gotten from the course to add to the skillset the serious student can put to future
good use.
John & Bonnie Seim
43
Tools
Safety glasses
assorted hand tools
A selection of quality polishing paper from 120-400 grits
If students would like to bring projects to work on not related to case coloring, they may do so with
the instructors permission.
******************************************************************************
Leather Holster Making $375
Continuing Ed Only – not for college credit
This class has been created to teach students how to construct quality gunleather using methods and
techniques requiring a minimum number of leather tools. Since the work is by hand (no sewing
machines, etc.) reasonable hand strength and dexterity is necessary for class participation.
Students will learn the methods I used to design, layout, stitch, wet mold, edge, burnish, apply oil or
antique finish, and basket stamp holsters. As the class progresses, each student will construct two
holsters for guns of their choice. I would suggest a pancake holster for a semi auto (model 1911’s
are great) as well as a revolver holster of either a conventional or western design. You will have the
opportunity to basket stamp one of these holsters if you so desire. Students may wish to bring two
personal handguns to use in constructing these holsters (no scoped handguns, please). If time
permits, we will discuss construction of gunbelts, cartridge loop sewing, magazine cases, saddle
scabbards, and knife sheaths.
Robert (Bob) Calkins is an active shooter, hunter and firearms collector who has made gun leather for
himself, friends, and customers for over 50 years. In 1990, he and his wife, LaVon, decided to establish 3
Cross Custom Gunleather as a part-time business. Upon retiring from the Department of the Interior in 1994,
gunleather became a full-time occupation. Bob crafts gun rigs for cowboy competitors, which has included
State, National, and World Champion shooters. Hunters, outdoorsmen, casual shooters, and concealed-carry
holders, make up the balance of his business.
At age 75, Bob has cut back on working hours, but still produces several holsters and gun belts every week.
In his opinion, there are numerous good leather craftsmen. However, he believes an individual with a true
appreciation of firearms and their use is essential to building a truly functional piece of gun leather.
Bob Calkins 505-598-0208 (h) 505-716-3231 (c) or [email protected]
Bob Calkins
44
Leather Holster Making Tool List
Quality leather will be made available to students through the college bookstore. Costs will be
based on projects to be developed. TSJC Bookstore – please contact Sandra Rodman at 719846-5610 for information
Needles, thread, oil, stamping tools, etc. will be furnished at no charge by the instructor.















¼” light weight electric drill
Dremel tool with sanding drums
Clear safety glasses
Sponge and quart size water container (large butter tub is great)
Straight edge ruler
16: x 20” piece of ¾” plywood with smooth side
Exacto knife with blades
Rawhide #4 Mallet (such as Tandy #3300-04)
Craft Tool Leather Shears (such as Tandy #3050-00)
Grooving tool (such as Tandy 8074-00)
Edging tool (such as Tandy #8077-03 or Osborne #127-4 preferred)
Craft tool Overstitcher #6 (such as Tandy 8079-06)
#14 Punch (such as Tandy 3777-14)
12” x 12” Granite piece (minimum 1” thick)
WEEK FOUR June 20-24
Advanced Welding for Gunsmiths $380 or 2 credits
This class will be advanced study of gun and gun parts welding
Prerequisite: Welding for Gunsmiths
Mike Taunt worked as a precision tig welder in the art and architectural metal fabrication industry for over
and is a proud graduate of the Gunsmithing program at TSJC.
Mike Taunt
45
Advanced Welding Tool List
Welding hood
Gloves
Pencil grinder with 1/8 collet and a set of carbide or diamond 1/8 shank. Harbor Freight carries
the grinders and bits for a reasonable price
Students “MUST” have a broken or pitted gun or gun parts or a kit gun in flats
Small vice grips needle and flat nose
6” bastard file (TSJC bookstore has great files)
120, 240, 320 grit sandpaper rolls. (bookstore has good paper)
***************************************************************************
BUILDING A RACE GUN
Students will be required to take both weeks of this class
July 13-July 24, 2015
This will be a two week course covering the techniques and methods used to build a race gun
utilizing the STI/SVI 2011 high capacity pistol. These guns are the “Ferrari’s” of the Practical
Shooting sports and are the platform of choice for the top IPSC/USPSA competitors.
46
Students can choose to build either an Open (with optics and compensator) or Limited (no scope or
compensator) gun as both will be covered. Open guns are typically chambered in
38Super/38Supercomp or 9mm. Limited guns are typically chambered in 40 S&W. It is HIGHLY
recommended that students order the frame/slide and barrel ahead of time. Do not wait until
close to class time as these parts can sometimes be on backorder. Previous experience with the
1911 platform is highly recommended, but not required. Basic machining or equivalent experience
is required.
The course will cover lightening slides, fitting barrels to slide, barrel porting, mounting optics,
fitting grip safeties, triggers, compensator design and fitting, magazine tuning, fitting of internals
and reloading tips for race guns. Also covered are tuning the gun (spring weights, firing pin stop
radius are examples).
There are a myriad of choices in building a race gun, many will be based on the shooter’s choice.
Range time will be provided so students can shoot several different configurations to understand
how gun configuration affects recoil control, dot/sight tracking, recoil feel and target transitions.
Ammunition and firearms will be provided for this range session. Time permitting, there will be
range time the last day of class for students to fire the guns they built and run through an IPSC
practical stage.
Steve Pitt is the owner of Yukon Arms, Ltd. and has been a competitive shooter since 1995. He
holds a Master class rating in USPSA Open, Limited and Limited10 divisions.
Steve Pitt is the owner of Yukon Arms, Ltd. and has been a competitive shooter since 1995. He
holds a Master class rating in USPSA Open, Limited and Limited10 divisions.
Steve Pitt
Recommended parts listSTI frame/slideBarrel -
Compensator-
Internal parts-
It is highly recommended to get a slide/barrel prefit kit.
STI, STI Trubor, Barsto, Kart and KKM are all good barrels. Barsto’s in
particular take long time to order. If you have a different brand you like that
is fine. A Bull barrel is preferred, but not required, depending on the
compensator.
STI Trubor (barrel and compensator together) is a good choice. It also
comes as a compensator blank if you would like a different hole
configuration. Brazos Custom and CKArms also make a good compensator.
These can be ordered during class as there are a lot of options to discuss.
STI, Harrison Designs, EGW and Wilson (not their value line) are quality
parts.
47
Optics-
The C-more slide ride for frame mounted optics.
(The brands listed are only examples and are not required. There are definitely a lot of other good
choices).
Recommended tools listStudents should bring general gunsmithing tools such as:
Gunsmith Screwdriver Set
Armorer’s Bench Block
Hammer
Punch Set
6” stones (medium, fine, and ceramic)
Dremmel Tool w/Cratex wheels
Needle File set
Assorted files
Rolls of sand paper- 180-400 grit
Dial calipers
Nice to have if you fit a lot of 1911’s
Slide holding jig- the Yavapai jig is a good one (Brownells part # 080-835-002WB)
Hammer/Sear jig- I prefer the Power Custom Series 1 (Brownells part # 713-070-002WB)
Endmills- misc. endmills- 5/8”, 3/8”, ¼”, 1/8” are common sizes.
1911 locking lug file (Brownells part # 080-751-000WB)
1911 lug fitting kit (Brownells part # 080-000-089WB)
Specialty tools will be supplied, but please bring anything you might have that you think will be useful.
Please contact Steve Pitt for any questions on tools.
*********************************************************
Introductory Hand Engraving – orEngraving Problems/Alumni Engraving Course
$380 or 3 credits
For information on the Introductory Hand Engraving Course, please refer to week 2 (June 6th)
above
48
Engraving Problems/Alumni Engraving:
This course is designed for students that have completed the Introductory Hand Engraving and
Advanced Hand Engraving courses. It is an individualized course that will focus on specific needs
of the student. Students can bring projects that they would like to get assistance with and
specialized instruction. Students that register for this course should contact the instructor prior to
the beginning of the class so that appropriate instructional arrangements can be made.
Engraving Course Tool List
1.
2.
3.
4.
Steel ruler, 6 inch
5.
Dividers
6.
Scribe
7.
8.
9.
10.
11.
from GRS
12.
13.
Talcum powder
14.
15.
16.
17.
18.
19.
20.
21.
49
22.
GRS Tools
The Ngraver Company
Rudolph Faust, Inc.
eckersleys.com
**********************************************************
Double Guns Week 1 $380 or 2 credits
This course will cover book work on high grade double guns, including regulating triggers,
repairing locks and restoring guns to safe condition. Resetting sprung ribs and tightening loose
actions will also be discussed. Students will bring their own guns to work on. PREREQUISITE:
Machine shop or consent of instructor. See additional information from the instructor below.
Dennis Potter has been Gunsmithing full time since 1974, specializing in side-by-side and
over/under shotguns. As both stock maker and metal smith he offers all phases of repair and
restoration. He has been a member of the American Custom Gunmakers Guild since 1984 an has
serve on the Guild’s Board of Directors.
[email protected]
Shop Phone 414-425-4830
Dennis Potter
A MESSAGE FROM THE INSTRUCTOR
Welcome to Trinidad State Junior College and the course in Side By Side and Over/Under Shotgun
Repair. I am looking forward to meeting all of you and intend to give you a great deal of
50
information concerning repair of these guns. My plan is to spend an hour or so of time each day in a
lecture environment with the handout I will provide you with at the start of the class.
Each student must provide the guns they will be working on. I would suggest bringing at least two
guns, bring as many as you can; we don’t want to run out of project guns with time remaining. The
school cannot provide guns to work on, so the class is geared to your guns and their problems, and
not everyone will be working on the same projects at the same time, but we will use each other’s
projects as learning experiences for all.
No ammunition is allowed in the classroom at any time. Safety is our first concern.
If you have questions you can reach me at my shop at 414 425 4830 or email [email protected]. I
will do my best to answer your questions as soon as possible but please remember I have my
business to run also.
This class will cover side by side and over/under shotgun repair and rebuilding. The class is
primarily a workshop, with the student working on the guns he or she provides. Instruction will be
focused on the work required on each gun. I will also provide a certain amount of instruction on
specific topics listed below. Most of my instruction is centered on how I do the task, not that this is
the only way or even the best way. I have a multi-page handout you will get the first morning of
class.
Safety, introduction, basic tools and fixtures, assessment of condition, disassembly principles.
Metal finishes
Barrels bores, dents, honing, bulges, chambers, striking barrel exteriors.
Making parts, steel selection, heat treatment, case hardening, screws, shop made cutters welding and
soldering.
Spring making and heat treatment
Soldering ribs and forend loops
Refitting actions and barrels, hinge pin, hook, locking bolt, barrel bite and forend fit
Wood repairs
Trigger pull principles, regulation and safety
Double Guns Tool List
The following tool list is a guideline, what I feel you need to tackle class projects. You may not
need or use all the tools listed here, but they are all necessary for many tasks, and even if you don’t
use all of them in the class on your projects, you will use them if you continue with shotgun work.
***Tools marked with *** are required for the class, the school does not provide them and you will
need them to participate in the class. After some of the tools I have listed a code for source of the
tool, eg: MSC for MSC Supply, BR for Brownells.
***1 pair of safety glasses with side shields
***1 1oz ball peen hammer
1 soft faced hammer eg; Stanley #594 MSC
1 common slip-joint pliers
1 pair of cheap needle nose pliers. We may degrade these with heat so buy a cheapy.
1 8” #0 extra narrow pillar file BR 360 312 131
***1 8” three square (triangular) file
51
***1 8” mill bastard file and 1 10” mill bastard file
***1 roll of heavy duty paper towels
Some cotton rags or shop towels
1 pink pearl rubber eraser 2 ½ x 1 x ½
1 Exacto knife with #11 blade or a good pocket knife
1 3/8’ variable speed drill
1 6” half round #0 cut file
*** 1 ¼” chain saw file
1 5/16 round smooth cut file MSC
All file must have handles, even corn cobs if you are on a budget
1 set of needle files, you don’t need expensive ones to start
***1 6: scale or ruler
1 hacksaw with a high quality 10” 24 tooth blade
1 steel scriber
1 large magic marker
1 roll 1” masking tape
***1 12 x 12 ¼ thick cork sheet. This will be used for making padded vise jaws. Walmart may
even have these, or else MSC
1 12 x 12 scrap carpeting for more vise jaws
1 Dremel tool or equivalent, should be variable speed with accessories kit. The ability to control
(lower) speed is important
***1 each 10 ft roll or sheet of 120, 240,320, abrasive cloth. I like the two inch wide, but one inch
or sheets are ok, for metal polishing
1 each sheets of 400 and 600 wet or dry abrasive paper
*** 1 Mapp or propane torch
1 sheet grey Scotchbrite (Reg). scouring pad
***1 set of screwdrivers. Suggest Brownells set #080 103 081 as a good start. Don’t use cheap
screwdrivers on your expensive gun.
1 apron, if you wish. I always wear one as I can get dirty, and you probably will too
And last, but not least, some good gun oil (preferably no WD40) and some solvent
The book store here has a lot of tools, but I would not count on getting everything there. Bring as
many tools as you can, it’s pretty hard to have too many tools, or too many guns.
There also is a pretty good hardware store just down the street from the school and a Walmart down
the road.
If you intend to do some rust bluing bring the following:
1 pair brown or white cotton gloves
1 pr rubber gloves, I like the Bluettes brand
1 package of oil free 0000 grade steel wool. It must be oil free, like the Liberon brand from wood
workers supply houses. Common hardware store wool is full of oil and not of any use in bluing
*******************************************************************
52
Metalsmithing Single Shot Rifles Week 1
$380 or 2 credits
This will be a two-week long hands-on course on Metalsmithing the falling block rifle. The
emphasis will be on the high quality workmanship and the accurate single shot rifle. The student
will be led through the process of properly preparing and barreling their own single shot action.
Class will cover the various US and British single shot action designs of the late 19th century up
through WWI. Classroom instruction will cover the various action designs, simple and set trigger
designs, chamber and extractor/ejector designs, and basic metallurgy and heat treating theory.
PREREQUSITES: Mill, lathe and hand tool experience or consent of instructor.
Glenn Fewless is an American Custom Gunmakers Guild member specializing in building high quality
BPCR rifles and classic single shot rifles. Glenn not only demonstrates his ability to create works of art in
metal and wood, but also as a seasoned competitor in NRA Black Powder Cartridge Rifle Silhouette,
Midrange and Creedmoor matches as well as the American Single Shot Rifle Association.
[email protected]
Glenn Fewless
Metalsmithing the Single Shot Rifle Tool List
Single shot falling block action of your choice, original or reproduction. There are reproductions of
some of the old actions available, such as Steve Earle’s Wesson #1 Long Range and CPA’s Steven’s
44-1/2 action.
Barrel blank. Students choice of caliber, twist, contour and make. Contouring or octagoning of
blank can be done in class, but if you obtain a contoured or octagon blank it will save some time that
could be used elsewhere on the project. Most any of the barrel makers will supply the barrels
contoured and some offer octagon. Green Mountain offers quality octagon barrels in large calibers
at a reasonable price.
Chamber reamer. Most SAMMI spec reamers are available for use in the TSJC tool room. If you
have specific desires for chamber dimensions you will need to provide your own reamer and head
space gauges if required.
Sights or scope blocks, as desired.
Shop tools. As the students are expected to have a working knowledge of lathes and milling
machines, they will have a good idea as to what tools they will need. A basic list would include.
Quality 6” caliper
Quality 1” micrometer
6” scale
¼ and 5/16” high speed tool bits.
Center gauge
Thread pitch gauge
Milling cutters, ¼, 3/8 and ½”
53
3/8” 60* dovetail cutter
Set of feeler gauges
Quality dial test indicator
Magnetic base indicator holder
Calculator and note book
Set of Allen wrenches .050” to 3/8
8” mill file
6” Swiss pillar files #0 and #2 cut
Handles for files Polishing tools and techniques. All polishing will be done by hand, requiring a
small assortment of abrasive stones and QUALITY abrasive paper. 1/2 “ and 3/8” triangular stones
in medium and coarse would be a good start. Abrasive paper in 120, 180, 240, 320, 400 and 600
grit.
Safety glasses are required in the machine shop labs. Prescription glasses are acceptable. If your
eyes have a lot of miles on them you might consider a low to medium power Optivisor to help with
the detail work. I use a #3 lens most of the time.
Students are encouraged to contact instructor for advice on tools and materials for their specific
project. Many of the tools and measuring instruments are available at the TSJC Book Store at
student discount prices
***********************************************************************
Brownells 1911 Course and Customization $380
Continuing Ed only – not for college credit
This one week course will cover all aspects of building a 1911 pistol from a bare frame and slide
and fitting of all components. Students will be expected to know how to disassemble and assemble a
1911 pistol before attending class. Precision filing and fitting of parts will be a required skill.
Machine shop skills will be required for machining slides for sight installation and frames for
ramped barrels. We can instruct you on how to machine the slide and frame as needed, but will not
have time to do the work for you. Or teach you how to operate a lathe or mill.
If you do not know how to operate a lathe or mill, you should order your slide and frame already
machined for sights and barrel type you want to use.
We will have for your use fixtures, jigs for trigger work, files, mill cutters, and stones to accomplish
the work needed.
HIGHLY recommended reading before attending the class is the Kuhnhausen book, The Colt .45
Automatic, a Shop Manual. Available from Brownell’s, part # 924-200-045 for $31.99.
Supplying your own basic hand tools will be a great benefit, instead of having to wait for them to
become available for your use.
Mike Watkins
Mike can be reached through Ted Somers at Brownells. Direct: 641-623-8501
Mike Watkins is a veteran IPSC competitor. Mike learned how to build the guns he was
shooting and has turned that knowledge into a career spanning more than three decades. Raised in
Lubbock, Texas he operated his own gun shop before joining Brownells Technical Services team
nine years ago. Mike is known as a true aficionado of the 1911 auto and is active in the American
54
Handgunner Club and the American Pistolsmiths Guild, where he was named Pistolsmith of the
Year in 1997. Watch for him in his 1930 Ford five-window couple street rod with the license plate,
ITLBURN. Mike can be reached through Ted Somers at Brownells. Direct: 641-623-8501
***********************************************************************
Gun Leather II $375
Continuing Ed only – not for college credit
Gunleather II has been created to expand methods and techniques learned by students in Basic
Holstermaking. This class will take students to the next level of gunleather constructions. Students
will review principles learned in Basic Holstermaking with emphasis on development of a gunbelt,
holster, and associated leather for a complete gun rig. The remainder of the class will give students
the latitude to develop projects of their choice associated with guns, knives, and cartridge retention.
Students will be required to provide their own firearms and knives for project development.
Robert (Bob) Calkins is an active shooter, hunter and firearms collector who has made gun leather for
himself, friends, and customers for over 50 years. In 1990, he and his wife, LaVon, decided to establish 3
Cross Custom Gunleather as a part-time business. Upon retiring from the Department of the Interior in 1994,
gunleather became a full-time occupation. Bob crafts gun rigs for cowboy competitors, which has included
State, National, and World Champion shooters. Hunters, outdoorsmen, casual shooters, and concealed-carry
holders, make up the balance of his business.
At age 75, Bob has cut back on working hours, but still produces several holsters and gun belts every week.
In his opinion, there are numerous good leather craftsmen. However, he believes an individual with a true
appreciation of firearms and their use is essential to building a truly functional piece of gun leather.
Bob Calkins 505-598-0208 (h) 505-716-3231 (c) or [email protected]
Bob Calkins
Gun Leather Tool List
Quality leather will be made available to students through the college bookstore. Costs will be
based on projects to be developed. TSJC Bookstore – please contact Sandra Rodman at 719846-5610 for information
Needles, thread, oil, stamping tools, etc. will be furnished at no charge by the instructor.
 ¼” light weight electric drill
 Dremel tool with sanding drums
 Clear safety glasses
 Sponge and quart size water container (large butter tub is great)
 Straight edge ruler
55










16: x 20” piece of ¾” plywood with smooth side
Exacto knife with blades
Rawhide #4 Mallet (such as Tandy #3300-04)
Craft Tool Leather Shears (such as Tandy #3050-00)
Grooving tool (such as Tandy 8074-00)
Edging tool (such as Tandy #8077-03 or Osborne #127-4 preferred)
Craft tool Overstitcher #6 (such as Tandy 8079-06)
12” x 12” Granite piece (minimum 1” thick)
WEEK FIVE June 27-July 1
Bluing (core class for certificate) $380 or 2 credits
In this course we will mainly be covering hot salt blueing as it applies to the firearms industry. This
course includes instruction and hands on training in metal preparation, hot bluing, niter bluing, and
some alternative finishes such as Parkerizing and spray finishes. Students should supply their own
firearms or parts to work on. The focus of this class is to learn quality metal finishing skills, not to
blue a large volume of guns. It would be better to end your week with 3-4 exceptional quality
projects, rather than 15-20 incomplete and lacking quality finishes.
Blueing, and several Machine Shop classes.
[email protected]
office # 719-846-5525
Ryan Newport
Recommended Tools and Materials List
6” adjustable wrench
Allen wrench set
Aluminum oxide polishing cloth 180, 240, and 400 grits
56
Assorted files with handles smaller sizes 6" or 8" may be most useful
Bench block - we can make this from a hard rubber hockey punch.
Dust mask
Guns to blue
Gunsmith screwdriver set.
Hammer
Long sleeve shirt and pants (Required)
Needle nose pliers
Pin punch set
Safety glasses (Required)
Scotch brite pads (green and gray)
This list reflects minimum requirements. If you have other tools or supplies that maybe useful, bring
them because you can never have enough tools.
**********************************************************
Double Guns Week 2 $380 or 2 credits
This is the second week of a two-week course, which will cover book work on high grade double
guns, including regulating triggers, repairing locks and restoring guns to safe condition. Resetting
sprung ribs and tightening loose actions will also be discussed. Students will bring their own guns
to work on. PREREQUISITE: Machine shop or consent of instructor.
Dennis Potter has been Gunsmithing full time since 1974, specializing in side-by-side and
over/under shotguns. As both stock maker and metal smith he offers all phases of repair and
restoration. He has been a member of the American Custom Gunmakers Guild since 1984 an has
serve on the Guild’s Board of Directors.
[email protected]
Shop Phone 414-425-4830
Dennis Potter
A MESSAGE FROM THE INSTRUCTOR
Welcome to Trinidad State Junior College and the course in Side By Side and Over/Under Shotgun
Repair. I am looking forward to meeting all of you and intend to give you a great deal of
information concerning repair of these guns. My plan is to spend an hour or so of time each day in a
lecture environment with the handout I will provide you with at the start of the class.
As a rough outline, the class will cover, Barrels, bores, dents and honing. Introduction to metal
finishes including rust bluing, leaf spring making, making various metal parts, resoldering ribs,
refitting (tightening) actions and trigger pulls. We will cover some stock repairs, but not stock
making per se. Stockmaking is a separate subject itself. Your projects are what we are going to work
on, whatever they may be.
57
Each student must provide the guns they will be working on. I would suggest bringing at least two
guns, bring as many as you can; we don’t want to run out of project guns with time remaining. The
school cannot provide guns to work on, so the class is geared to your guns and their problems, and
not everyone will be working on the same projects at the same time, but we will use each other’s
projects as learning experiences for all.
No ammunition is allowed in the classroom at any time. Safety is our first concern.
If you have questions you can reach me at my shop at 414 425 4830 or email [email protected]. I
will do my best to answer your questions as soon as possible but please remember I have my
business to run also.
This class will cover side by side and over/under shotgun repair and rebuilding. The class is
primarily a workshop, with the student working on the guns he or she provides. Instruction will be
focused on the work required on each gun. I will also provide a certain amount of instruction on
specific topics listed below. Most of my instruction is centered on how I do the task, not that this is
the only way or even the best way. I have a multi-page handout you will get the first morning of
class.
Safety, introduction, basic tools and fixtures, assessment of condition, disassembly principles.
Metal finishes
Barrels bores, dents, honing, bulges, chambers, striking barrel exteriors.
Making parts, steel selection, heat treatment, case hardening, screws, shop made cutters welding and
soldering.
Spring making and heat treatment
Soldering ribs and forend loops
Refitting actions and barrels, hinge pin, hook, locking bolt, barrel bite and forend fit
Wood repairs
Trigger pull principles, regulation and safety
Double Guns Tool List
The following tool list is a guideline, what I feel you need to tackle class projects. You may not
need or use all the tools listed here, but they are all necessary for many tasks, and even if you don’t
use all of them in the class on your projects, you will use them if you continue with shotgun work.
After some of the tools I have listed a code for source of the tool, eg: MSC for MSC
Supply, BR for Brownells.
1 pair of safety glasses with side shields
1 1oz ball peen hammer
1 soft faced hammer eg; Stanley #594 MSC
1 common slip-joint pliers
1 pair of cheap needle nose pliers. We may degrade these with heat so buy a cheapy.
1 8 “ #0 extra narrow pillar file BR 360 312 131
1 8” three square (triangular) file
1 8” mill bastard file 1 10 “ mill bastard file
1 roll of heavy duty paper towels
Some cotton rags or shop towels
1 pink pearl rubber eraser 2 ½ x 1 x ½
1 Exacto knife with #11 blade or a good pocket knife
58
1 3/8’ variable speed drill
If you intend to do some rust bluing bring the following:
1 pair brown or white cotton gloves
1 pr rubber gloves, I like the Bluettes brand
1 package of oil free 0000 grade steel wool. It must be oil free, like the Liberon brand from wood
workers supply houses. Common hardware store wool is full of oil and not of any use in bluing
1 6 “ half round #0 cut file
1 ¼ “ chain saw file
1 5/16 round smooth cut file MSC
All file must have handles, even corn cobs if you are on a budget
1 set of needle files, you don’t need expensive ones to start
1 6 “ dial caliper (Vernier type) or a 0 to 1” micrometer
1 center punch
1 6 “ scale or ruler
1 hacksaw with a high quality 10 “ 24 tooth blade
1 steel scriber
1 large magic marker
1 roll 1 “ masking tape
2 12 x 12 “ ¼ thick cork sheet. This will be used for making padded vise jaws. Walmart may even
have these, else MSC
1 12 x 12 “ scrap carpeting for more vise jaws
1 Dremel tool or equivalent, should be variable speed with accessories kit. The ability to control
(lower) speed is important
1 each 10 ft roll or sheet of 120, 240, 320 abrasive cloth. I like the two inch wide but one inch or
sheets are ok, for metal polishing
1 each sheets of 400 and 600 wet or dry abrasive paper
1 Mapp or propane torch
1 sheet grey Scotchbrite (Reg). scouring pad
1 set of screwdrivers. Suggest Brownells set # 080 103 081 as a good start. Don’t use cheap
screwdrivers on your expensive gun.
1 apron, if you wish. I always wear one as I can get dirty, and you probably will too
And last but not least, some good gun oil (preferably not WD 40) and some solvent
The book store here has a lot of tools but I would not count on getting everything there. Bring as
many tools as you can, it’s pretty hard to have too many tools, or too many guns.
There also is a pretty good hardware store just down the street from the school, and a Walmart down
the road.
**********************************************************
Metalsmithing Single Shot Rifles Week Two $380 or 2 credits
This will be the second week of the course on metalsmithing the falling block rifle. The emphasis
will be on high quality workmanship and the accurate single shot rifle. The student will be led
through the process of properly preparing and barreling their own single shot action. Class will
cover the various US and British single shot action designs of the late 19th century up through WWI.
Class room instruction will cover the various action designs, simple and set trigger designs, and
59
basic metallurgy and heat treating theory. PREREQUISITES: Mill, lathe and hand tool experience
or consent of instructor. Class limited to 10 students.
Glenn Fewless is an American Custom Gunmakers Guild member specializing in building
high quality BPCR rifles and classic single shot rifles. Glenn not only demonstrates his ability to
create works of art in metal and wood, but also as a seasoned competitor in NRA Black Powder
Cartridge Rifle Silhouette, Midrange and Creedmore matches as well as the American Single Shot
Rifle Association.
[email protected]
Glenn Fewless
Metalsmithing the Single Shot Rifle Tool List
Single shot falling block action of your choice, original or reproduction. There are reproductions of
some of the old actions available, such as Steve Earle’s Wesson #1 Long Range and CPA’s Steven’s
44-1/2 action.
Barrel blank. Students choice of caliber, twist, contour and make. Contouring or octagoning of
blank can be done in class, but if you obtain a contoured or octagon blank it will save some time that
could be used elsewhere on the project. Most any of the barrel makers will supply the barrels
contoured and some offer octagon. Green Mountain offers quality octagon barrels in large calibers
at a reasonable price.
Chamber reamer. Most SAMMI spec reamers are available for use in the TSJC tool room. If you
have specific desires for chamber dimensions you will need to provide your own reamer and head
space gauges if required.
Sights or scope blocks, as desired.
Shop tools. As the students are expected to have a working knowledge of lathes and milling
machines, they will have a good idea as to what tools they will need. A basic list would include.
Quality 6” caliper
Quality 1” micrometer
6” scale
¼ and 5/16” high speed tool bits.
Center gauge
Thread pitch gauge
Milling cutters, ¼, 3/8 and ½”
3/8” 60* dovetail cutter
Set of feeler gauges
Quality dial test indicator
Magnetic base indicator holder
Calculator and note book
Set of Allen wrenches .050” to 3/8
8” mill file
60
6” Swiss pillar files #0 and #2 cut
Handles for files Polishing tools and techniques. All polishing will be done by hand, requiring a
small assortment of abrasive stones and QUALITY abrasive paper. 1/2 “ and 3/8” triangular stones
in medium and coarse would be a good start. Abrasive paper in 120, 180, 240, 320, 400 and 600
grit.
Safety glasses are required in the machine shop labs. Prescription glasses are acceptable. If your
eyes have a lot of miles on them you might consider a low to medium power Optivisor to help with
the detail work. I use a #3 lens most of the time.
Students are encouraged to contact instructor for advice on tools and materials for their specific
project. Many of the tools and measuring instruments are available at the TSJC Book Store at
student discount prices.
**************************************************************
Introduction to Gunsmithing for Women
$380 – continuing ed only, not for credit
This course will cover operational theory, disassembly and assembly, proper use of hand tools and
precision measuring instruments, and an introduction to basic bench work of the Gunsmithing trade.
Cycle of Operation, Common malfunctions, repairs and maintenance procedures will be covered.
Course work will focus on common semi-auto handguns. Students should bring guns to use as class
projects.
Subjects to Be Covered
(Safety Checks and General Maintenance)
1. Class Room Safety
2. Safety Checking your handgun
3. Complete Disassembly of your handgun
4. Checking all critical internal parts for burrs and deformation
5. Maintenance and Lubrication
6. Re-Assembly
(Malfunctions and Corrections)
1. Failures to Feed
2. Failures to Close/Chamber
3. Failures to Fire
4. Failures to Extract
5. Failures to Eject
6. Failures of Slide to Lock Open After Firing Last Round
7. Hammer Follows Slide During Firing or When Loading
8. Hammer Fails to Drop When Trigger is Pulled
9. Trigger Fails to Return Forward
10. Defective Safeties
11. Popular Modifications: Why They Are Done, Do You Need Them (Discussion if Time Permits)
61
Instructor: Sheila Miles
Introduction to Gunsmithing
Tool List
Screwdrivers - miscellaneous assortment designed to fit gun screws
Small Hammer - 4oz brass or metal
Small pin punches
Metal files - assortment of small and medium metal cutting
Dial Caliper - 6"
Steel 6" Rule
4" wide Vise Jaws to protect work - (1/4" plywood lined with cork will do)
File Card
Needle Files
Dental Pick
Pliers w/side Cutters
- Note: Many of the above tools can be substituted with a like tool from home. The thing about most
gun work is you don't know you will need it until you need it, so you may choose bring extra tools
you find handy. All tools listed can be purchased on campus at the Trek-Inn Bookstore or through
Brownells, Inc. 200 South Front St., Montezuma, Iowa 50171 Ordering/Tech Support: 800-7410015
WEEK SIX July 4-8
Basic Machine Shop (Core Class for Certificate) $380 or 2 credits
This class offers instruction and hands-on experience in machine tool operation. Students will gain
experience with the metalworking lathe and milling machine in the manufacture of parts and tools.
Bill Sturtevant is a graduate of the Trinidad State Gunsmithing Program, Bill joined the full-time
62
Bill Sturtevant
Basic Machine Shop Tool List
Required Tools:
#2 center drill
5/16" or 1/4" HSS lathe tool bit blanks
6" dial caliper or 1" micrometer
6" steel rule
60-degree center gauge
Assorted files with handles
Carbide tipped scribe
Emery cloth: 120, 220, 320 and 400 grit
Layout dye
Safety Glasses
Thread pitch gauge
6" or 8" adjustable wrench
Allen wrench set up to 3/8”
Center punch
Gunsmith pin punch set
Hammer
Pliers
Screwdrivers
A list of required tools is also enclosed. Please note that this list is bare minimum. If you have other
tools or supplies that may be useful, bring them. You can never have too many tools.
*********************************************************
Custom Stockmaking Week 1 $380 or 2 credits
This two-week course is designed to introduce the participant to custom stockmaking. Different
types of gunstock wood, layout, shaping and finishing will be covered. Hands on experience is
emphasized.
Clayton Nelson graduated from Trinidad State Junior College in 1955. He has been a full-time custom
riflemaker since 1966 and has produced over 850 custom rifles to date. He is still active at his bench on a
full-time basis choosing his love for his craft over retirement. He has created several innovative procedures
in his career that have been adopted and practiced by other custom riflemakers. His rifles are pieces of art
created through his vision and exceptional metalwork and stockmaking skills. Clayton Nelson, 506 Ash St.,
Trinidad, CO 81082, ph# 719-846-3720.
63
Clayton Nelson
Custom Stockmaking
Tool List
Safety Glasses (OSHA Approved)
1 Recoil Lug Chisel
1 #3 Rawhide Mallet
1 Jar Inletting Black
1 Toothbrush
1 #49 Cabinet Makers Rasp
Assortment of files of difference shapes and sizes (desirable/optional)
1 Rubber Sanding Block
1 Recoil Pad
Assortment of sandpaper 120 gr. to 500 gr.
1 Block Forend Tip Wood (only if desired on stock)
1 Type of Oil Stock Finish (hand rubbed or spray)
1 Medium Regular Screwdriver
1 Medium Phillips Screwdriver
1 5/32” Straight Push Chisel
1 ½” Straight Scraper
1 ½” Curved Scraper
1 ¼” “U” Scraper
1 ¼” Straight Scraper
1 ¼” Curved Scraper
1 9/16” “U” Gouge
1 9/16” Barrel Channel Rasp (optional)
WEEK SEVEN July 11-15
ADVANCED MACHINE SHOP (Core class for certificate)
$380 or 2 credits
This class will provide further instruction and practice on machine tool operation. The students will
be instructed in rifle barrel re-barrel techniques as well as some advanced machine shop operations.
Projects will vary according to individual interests. PREREQUISITE: Basic machine shop or
consent of instructor.
64
Bill Sturtevant
Advanced Machine Shop Tool List
Barrel fitting requires that you provide one pre-contoured barrel, and an action that suits the class
project. If you have more needs or would like to include something else, bring two. Call if you think
you want other instruction.
Required Tools:
#2 or #3 Center drill
1/2 ", 4 Flute double end mill
5/16" - 3/8" HHS tool bits (and/or appropriate turning and facing carbide bits)
6" Dial caliper
6" Steel rule
60° Thread center gauge
Assorted files (with handles)
Carbide tip scribe
Emery cloth: 80, 120, 240, 320, 400 grit
Layout dye
Safety glasses
Thread pitch gauge
6" or 8" Adjustable wrench
Allen wrench set up to 3/8"
Center punch
Gunsmithing pin punch set
Gunsmithing screwdrivers
Hammer
Pliers
Tool box
******************************************************************************
65
SPRING PISTON AIRGUNS
$380 or 2 credits
Present an overview of airgun power plants focusing on the spring piston air guns. Explain how the
energy to power the pellet is generated by the helical coil spring. Cover the reasons for mainspring
failure. Start the repair process with the initial inspection, special tools, disassembly, preparation of
the compression cylinder for installation of new parts, install new parts, reassembly and subsequent
testing. Limited tuning and improving the operation will be addressed. Also proper lubrication and
maintenance will be covered. The special tools used for disassembly and assembly will be
introduced.
Randy Bimrose whose gun repair experience dates back 48 years, puts the same dedication,
determination, exactness and consistency into every repair. It does not matter if it is a shooter
setting a world record, a national champion or the casual plinker wanting to hit that spinner as he
relaxes in the backyard. The desire of each shooter is to have an airgun that works properly and hits
where it is aimed. His experience and background include: A retired U.S. Marine Corps Match
Armorer, Former Senior Gunsmith for Beeman Precision Airguns for over 10 years, former
gunsmith for C&J Enterprises, Repair Consultant for Beeman Precision Airguns, Member of Marine
Corps Distinguished Shooter Assoc., Life member of NRA & CRPA (CA Rifle & Pistol Assoc),
also on the CRPA Board of Directors and member of NSSF .
[email protected]
Randy Bimrose
Recommended Textbook: Exploded Airgun Drawings 2nd Edition—Revised June 14, 2010 (ISBN
0-9674667-2-5) – John Groenewold
Students should bring a minimum of six and a maximum of twelve different spring piston air guns
from the list below. It will most beneficial if they are as many different models as possible.
Pistols:
Beeman P1, 700, Original 5;
Diana 5;
HW 45, HW 70;
HyScore 815, 825;
Webley Hurricane, Tempest, Mark I & II, Senior, Premier, Junior;
Winchester 353.
66
Rifles:
Beeman R series (any model), Model 100, 200, 250, Original 27, 35, Falcon I & II,
FX 1 & 2, S 1, GS 950, GS 1000, GT 600, GT 650, GT 700, C1, Kodiak;
Crosman Challenger;
Diana 20, 24, 25, 26, 27, 28, 34, 35, 36, 38, 350 Magnum, 45, 46, 48, 50, 52, 54;
FWB 124, 127;
HW 30, 35, 50, 55, 77, 80, 85, 95, 97, 98, 99;
HyScore 801, 807, 809, 828;
Marksman 45, 28, 55, 59, 60, 61, 70, 71, 72;
Webley Eclipse, Vulcan I, II & III, Omega, Patriot;
Winchester 425, 427.
The student should bring a new mainspring, piston seal and breech seal for each gun. Some guns
will require other parts during disassembly and when changing the piston seal. These include the
earlier Diana and other brands that are the same models. If you have any questions or doubts
contact Randy. If anyone has a problem getting any parts please contact me at least 3-4 weeks
ahead of the class meeting time.
AIRGUNSMITHING COURSE – GENERAL TOOL LIST
Safety glasses
Bench pad – rubber or similar to protect the gun
Soft jaws for the vise (felt, leather or molded plastic)
Assorted screwdrivers
Ball peen hammer (4 oz. Best)
Rawhide or non-marring hammer
Pin punch set
Roll pin punch set
Allen wrenches – SAE .050- ¼; Metric 1.5 – 6 mm
Assorted pliers – needle nose, slip joint, parallel action
Adjustable wrench – 8” best, 6” OK
Pin vises for holding small screws and pins
Files – 6” Swiss pattern pillar #2, #0
Needle file set #2
Dental picks – assorted
Deburring tool
Lathe tool bit – 3/8 or 1/2
12 gauge shotgun cleaning rod with slotted tip
3/8” variable speed drill (reversible is nice sometimes but not necessary)
Small flashlight – recommend Mag light with 2 AA batteries, it is bright and focuses to a spot for
looking down inside the tubes/compression cylinders or one with LED with several bulbs for a
bright beam
Paper towels – 1 roll
M-Pro 7 Gun Cleaner or Mil-Comm MC25 Gun Cleaner/Degreaser
67
M-Pro 7 Gun Oil LPX or Mil-Comm TW-25 Oil
Mil-Comm TW-25B Lubricating Light Grease
Almagard Vari Purpose Lubricant #3752 or Moly based grease
Rubbing alcohol – 91% is best, 70% OK
Plastic food storage tray (like Rubbermaid or similar), size 5-7” wide by 10-12” long and about 3”
deep max. A small inner tray to keep the screw and pins helps to keep things organized.
AIRGUNSMITHING COURSE -- SPRING PISTON GUNS TOOL LIST
All Manufacturers -- Mainspring compressor—Home made or commercial (Commercial available
from JG Airguns)
FWB 124 -- 11 mm Open end wrench or adjustable wrench
Marksman International Series -- 9 mm socket (1/4 or 3/8 drive)
Marksman International Series -- Circlip pliers
*********************************************************
STOCKMAKING - Week 2
$380 or 2 credits
This is the second week of the two-week course is designed to introduce the participant to custom
stockmaking. Different types of gunstock wood, layout, shaping and finishing will be
covered. Hands-on experience is emphasized.
Clayton Nelson graduated from Trinidad State Junior College in 1955. He has been a full-time
custom riflemaker since 1966 and has produced over 850 custom rifles to date. He is still active at
his bench on a full-time basis choosing his love for his craft over retirement. He has created several
innovative procedures in his career that have been adopted and practiced by other custom
riflemakers. His rifles are pieces of art created through his vision and exceptional metalwork and
stockmaking skills. Clayton Nelson, 506 Ash St., Trinidad, CO 81082
phone 719-846-3720.
Clayton Nelson
Tool List
Safety Glasses (OSHA Approved)
1 Recoil Lug Chisel
1 #3 Rawhide Mallet
1 Jar Inletting Black
1 Toothbrush
1 #49 Cabinet Makers Rasp
Assortment of files of difference shapes and sizes (desirable/optional)
1 Rubber Sanding Block
1 Recoil Pad
68
Assortment of sandpaper 120 gr. to 500 gr.
1 Block Forend Tip Wood (only if desired on stock)
1 Type of Oil Stock Finish (hand rubbed or spray)
1 Medium Regular Screwdriver
1 Medium Phillips Screwdriver
1 ½” Straight Scraper
1 ½” Curved Scraper
1 ¼” “U” Scraper
1 ¼” Straight Scraper
1 ¼” Curved Scraper
1 9/16” “U” Gouge
1 9/16” Barrel Channel Rasp (optional)
*******************************************************************************
Benchmetal Hand Tools and Metallurgy $380 or 2 credits
(core class for certificate)
One of the greatest skills a gunsmith can have is the ability to do fine hand work. In Gunsmithing
Hand Tools, we will be covering not only use of hand tools, but how to make your own high quality
tools, such as chisel and screwdrivers. We will also working on basic metallurgy including steel
identification, and selection, forging, soldering, brazing, and heat treating. The tools that we will be
covering are based on what would be found in just about every gun shop across America, from
major manufactures to home hobby shops. These tools include the use and care of files, vises,
torches, hammers, pliers, and some power tools such as drill presses and belt sanders.
Fred Weisenborn grew up in the Ozark hills of Missouri, where his father introduced him to the
art of blacksmithing. As a teenager, Fred joined the local blacksmith association, where he worked
with artists and craftsmen throughout the country and developed a passion for creating things from
metal. He spent the summer of 2002 at the Touchstone Center for Crafts in PA, where he was able
to work with many master smiths like Raymond Rybar Jr. and Bill Fiorini. When the time came to
choose a career, Fred decided to attend Trinidad State Junior College's gunsmith program. In the
next two years, Fred was taught everything from basic machining to building his own 50 caliber
rifle. After college, he worked for two years as a gunsmith for Gander Mountain in Foreset Lake,
MN. He decided to make a career change in 2007 and moved to the St. Louis area in the hopes of
more career opportunities in the firearm business. In 2010 he began working for Midwest Gun
Works in Pevely, MO as a gunsmith. Fred enjoys the daily challenges that come with his trade, and
believes that through hard work and the ability to collaborate with others, no problem is too big to
solve. Fred designs and makes knives and pens in his spare time and still enjoys creating work over
the forge. He sells items online as well as at local craft shows and consignment shops. He and his
wife and their three children reside in the small town of Columbia, IL, just outside of St. Louis, MO.
69
Fred Weisenborn
Recommended Tools and Materials List
6” adjustable wrench
Aluminum oxide polishing cloth 180, 240, and 400 grits
Assorted files with handles smaller sizes 6" or 8" may be most useful
Gunsmith screwdriver set.
Hammers (4oz&16oz)
Long pants are required – no shorts please
Pliers- heavy duty to hold material while forging
Safety glasses (Required)
This list reflects minimum requirements. If you have other tools or supplies that maybe useful, bring
them because you can never have enough tools.
*******************************************************************************
CAD/CAM 2D $380 or 2 credits
This class will provide the student with the essential concepts and techniques that are required to
successfully create part geometry, generate tool path, verify tool path models, and post process the
CNC codes. The student will be exposed to a 2-axis machining, 3-axis machining wire frame and
surface modeling, lathe programming, and DNC systems. Programming projects and models will be
demonstrated in the CNC manufacturing lab.
Joel Sturtevant - Machining Instructor at TSJC. Joel captured a first- place gold medal in the
2012 SkillsUSA National Leadership and Skills Conference’s Machining category. Joel won his
gold medal in the Precision Machining Technology category in an intense competition that included
hands-on production with machining equipment, manual code writing with software, and
examinations on machine and shop theory
Joel Sturtevant
70
There are no required tools for this class. You should bring a notebook and pen to take notes.
***********************************************************
Scrimshaw
$375.00 or 2 credits
(course counts toward the Gunsmithing Fine Arts Certificate)
Learn the Art of Scrimshaw one-on-one with Jim Stevens. You do not need an interest in
Gunsmithing to take this course. The techniques taught are the same for anyone wanting to learn
how to create beautiful scrimshaw on ivory, resins, and powder horns. An intensive, hands-on
course taught by artist, sculptor, and scrimshander Jim Stevens. Jim Stevens is a world renowned
scrimshander, writer and artist. He has three books published on scrimshaw techniques, has been
commissioned to create works for collectors throughout the world, and is a Kennedy Center
Registered VSA Artist in both the visual and literary arts. Jim brings his expertise and his no-fail
attitude to inspire all who attend his classes. No other art form in American has a longer history.
No other expression of art has such significance or influence on the American spirit.
Jim Stevens is a world renowned scrimshander, writer and artist. He has been commissioned to
create works of art for collectors throughout the world. Jim brings his expertise and his no-fail
attitude with him to inspire all who attend his classes, paving the way for all to express themselves
in a media that warms the soul. No other art form in American has a longer history. No other
expression of art has such significance or influence on the American spirit.
[email protected]
Jim Stevens
SCRIMSHAW AND POWDER HORN CLASSES TOOL/SUPPLY LIST
The most expensive item on the following list is less than $40. I have purchased everything on the
list and spent less than $100. All the items are small enough to carry in your luggage (don't pack
liquids or aerosol cans) but it is still easier to buy what you can from the College supply store.
Everyone will be given time on our first day to go to the supply store and purchase materials.
The College has a first-class tool, art and office supply store on campus. It is called "The Trek-Inn
Bookstore", phone 719-846-5610. Their prices seem to be equal to or less than prices on the
71
outside. Also, buying at the school store can definitely save you a lot of shopping or packing time.
You can even give them a call ahead of time and let them know what you need so you can be
assured they will have what you want when you arrive. If you already have any of these items, bring
them. There's no need to repeat your purchases.
Where to shop, source index:
(You can always order materials from the Internet if you prefer.) a=school store, b=local art store or
jewelry supply store or hardware store, c=local supermarket, d=local department store (like Walmart
or Kmart)
MATERIALS FOR BOTH SCRIMSHAW AND POWDER HORN CLASSES
Source
Item
a, b
One hobby knife handle (ie: X-Acto knife) (with rubber grip if you prefer)
a, b
Package of 5, #11 hobby knife blades
a, b
One small tube of Titanium White artist's oil paint
a, b
One small tube of Ivory Black artist's oil paint
a,b
One #2 pencil
a, b
One black aquarellable pencil (Stabilo or other brand)
a, b
One white aquarellable pencil (Stabilo or other brand)
a, b
One pencil sharpener (small hand held type)
a, b
One roll of transparent tape
a, b
One pair of scissors
a, b
One pink eraser
a, b
A clear plastic ruler (6 inches long is fine)
a, b
One small can of spray adhesive
a, b
One small bottle of rubbing alcohol
a, b
One small pair of pliers
a, b
One headband magnifier (ie: Opti-visor) (see note below)
a, b
Three sheets each of #400 and #600 wet/dry sandpaper
a, b
One package of .0000 steel wool pads
a, b
One paper dust mask (to use while sanding and polishing)
a, b
Safety glasses or goggles (required in school’s tool shops)
c,
One small package of facial tissue
c,
One package of assorted fine point, hand sewing needles
c,
One small package of cotton swabs (Q-tip or other brand)
d,
One small flexible-neck desk lamp. (see lighting note below)
a, b
One double-ended reversible pin vise (one end with zero minimum capacity)
ADDITIONAL MATERIALS ONLY FOR POWDER HORN CLASS
b,d
Hand-held rotary tool with set of small ball bits
(Rotary tools by WEN, Black & Decker, and others as low as $20 on
Amazon.com)
b,d
Set of small hobby hand files (usually comes in set of 6 miniature files in variety of
shapes)
a, b
Three sheets each of #100, #250, #350 wet/dry sandpaper
The Scrimshaw and Powder Horn materials in-class fee is $12. This covers the cost of ivory, Tagua
vegetable ivory, cattle horn, black buffalo horn, and other materials that I will have on hand for
72
special in-class projects. This is the only in-class fee. I will have all these materials on hand when
you arrive.
Headband Magnifier Note: If you have one, bring it. For those buying one for the first time, Optivisors headband magnifiers are one of the few that come with a choice of lenses. Lens powers are
designated by the numbers 3,5,7, and10. A #3 lens is 1x magnification and allows you to work about
14 inches from your material. Not much bending, but frankly not much help either. A #5 is 2x
magnification and allows you to work about 8 inches from your material. I find this is fine for most
work. A #10 gives 3x magnification but only about 4 inches of work distance. This is great for
minute details but can be hard on the back over long periods of time. I use a #5 Opti-visor lens for
general work and switch to a #10 for those times when I need the extra power for very fine details. I
guess the best advice I can give new buyers is to get what you think will work the best for you and
what fits your budget.
Other Types of Magnification: We will talk about opti-visors, microscopes, thread
counters, combination lamp/magnifiers, jewelers loupes, binocular loupes and other types
of magnifiers during the course. If you already use any of these magnifiers (or another)
and are comfortable and enjoy using what you have, go ahead and bring it.
Lighting (desk lamp note): Our classroom has good overhead light, however you'll soon learn that
you need additional lighting on your bench. This is why a desk lamp is on the materials list. Your
lamp should have a flexible neck and use a regular incandescent or low power tungsten bulb. What
you want is a lamp whose light can be positioned at a very low angle to the bench, with the back of
the lamp pointed towards you while reflecting light off the material you are working on.
Other Items: (Not required but nice. Bring them if you can.) Plastic box for your tools and supplies.
Notebook and pen (For taking notes during discussions). Seat cushion for your stool (they are hard).
Three old hand towels (to pad your work and your elbows and for wiping your fingers). Also bring
any additional tools and/or supplies you feel you may want or need, any artwork or pictures you
would like to work from, and a file folder for holding handouts.
Scrimshaw Class Final Project: For your final project you will need to purchase and bring with you
the material you want to use. If you do not bring your own material for your final project, you may
select from what I will have on hand.
I have no business relationship with them, but The Boone Trading Company is a
reputable company that has any material you may want for your final project. Their
number is 1-800-423-1945. You can go online to review their materials. Their web
address is: http://www.boonetrading.com/. Your final piece should be a belt buckle,
pendant, money clip, or similar item. I recommend a flat blank rather than a domed
cabochon, since domed cabochons are harder for beginners, but a domed cabochon
will still be okay if that is what you prefer. Also, for pendants, order a pendant at least
30-40mm in length.
Powder Horn Class Final Project: For your final project, I will have horns and materials on-hand.
You may bring your own horn if you have one you want to use instead.
I have no business relationship with them, but Powderhorns and More, Inc. is a
reputable company that has any material you may want for your final project. You
can go online to review their materials. Their web address is:
http://www.powderhornsandmore.com.
73
************************************************************
Welding for Gunsmiths (core class for certificate)
$380 or 2 credits
This course will cover basic safety and hands-on instruction will be provided to introduce the
student to various welding practices used in the art of Gunsmithing. Fabrication and repair of small
metal fixtures and parts related to the gunsmith will be highlighted. If time allows, other types of
welding may be covered by the instructor.
Mike Taunt worked as a precision tig welder in the art and architectural metal fabrication industry for over
and is a proud graduate of the Gunsmithing program at TSJC.
Mike Taunt
Basic Welding Tool List
Students should bring their own firearms for welding repairs
Safety glasses
Leather gloves for TIG welding (thin Goat skin)
Welding helmet (self-darkening is best)
Cotton shirt
Blue jeans okay
Pliers
Vice Grips
Stainless Steel
Brushes
No nylon clothing or jackets
Drop light
Small bench vise, nothing too big.
Small metal grinder with sanding and metal grinding disc's ( 4 1/2 in. or a 2 in. air grinder ) would
be a good thing to have. You will need to supply your own disc's.
********************************************************************************
74
HAT MAKING with Tom Hirt $375
Continuing Ed only-not for college credit
Students will learn to use the equipment and techniques to make a hat with products that most
people have or can readily get from home. Students will learn how to shape the hat by hand, ironing
of the brim, sizing and hand cutting of the brim, hand pouncing and hand finishing the crown . If
time allows, the class may touch on hat binding and trim by hand. Students will leave class with a
completed hat and the skills needed to practice what they learned at home and make additional hats
with supplies they have on hand. Tom will provide a hat box with all the tools and materials
needed for each student. This class has some down time while waiting for processes to
complete. To fill this time, students may bring a hat in need of repair and/or plan to make a second
hat as time permits.
Tom Hirt is old-fashioned guy who does things the old fashioned way. You might call him a
throw-back to a bygone era-that time when h and cowboys and craftsmen took care of business with
their hands. Hirt continues that tradition to this day as a hat maker who makes superior-quality
beaver felt hats one at a time by hand. Known as the hat maker for the movies, he has designed hats
for many famous clients including Val Kilmer, Sam Elliot, and Sharon Stone. His credits include
Tombstone, the Quick and the Dead, Conagher, and many others. After almost 20 years, he is
considered one of the West’s most notable and most established hatters.
http://www.hatsofthewest.com [email protected] 719-372-9399
Tom Hirt
Tool/Supply list
Students will need to register no later than May 30th in order for Tom to get the materials he will
need for the class. Students should contact Tom at the number above to get a complete list of other
supplies [at students expense] they need to bring and provide their hat size for ordering the block,
etc. Students will reimburse Tom for the cost of supplies and should contact him for pricing and to
provide hat size information.
WEEK EIGHT July 18-22
CLASSIC MATCH AIRGUNS $380 or 2 credits
Present an overview of airgun power plants (spring piston, CO2 and single stroke pneumatic) used
in the various classic match type airguns. The classic match airguns are defined as the original guns
designed for 10 meter competitions but have been eclipsed by more state-of-the-art systems. Their
75
original use dictated close tolerances in their manufacture and thus the repair procedures are more
detailed. These guns are now enjoyed primarily by the casual shooter although they are still used by
some schools and youth organizations for competition. The repair process begins with covering the
initial inspection, then special tools, disassembly, preparation for installation of new parts,
preparation of the parts, then the installation of the parts with tuning in mind and testing. Proper
lubrication will also be covered.
Randy Bimrose whose gun repair experience dates back 48 years, puts the same dedication,
determination, exactness and consistency into every repair. It does not matter if it is a shooter
setting a world record, a national champion or the casual plinker wanting to hit that spinner as he
relaxes in the backyard. The desire of each shooter is to have an airgun that works properly and hits
where it is aimed. His experience and background include: A retired U.S. Marine Corps Match
Armorer, Former Senior Gunsmith for Beeman Precision Airguns for over 10 years, former
gunsmith for C&J Enterprises, Repair Consultant for Beeman Precision Airguns, Member of Marine
Corps Distinguished Shooter Assoc., Life member of NRA & CRPA (CA Rifle & Pistol Assoc),
also on the CRPA Board of Directors and member of NSSF .
[email protected]
Randy Bimrose
Recommended Textbook: Exploded Airgun Drawings now a PDF download-http://www.jgairguns.biz/catalog/index.php?cPath=46_625
Students should bring a minimum of five and a maximum of eight different match air guns from the
list below. It will most beneficial to bring at least one each of the three power plant types if at all
possible.
Rifles:
Anschutz – LG250, 380
Beeman – M400
FWB – 150, 300, 300S, C60, C62, 600, 601, 602, 603
Diana – 60, 65, 66, 75, 100
Gamo – 126, 128, MC
HW – 55
HyScore – 810M, 810SM, 811SM, 820SM
Steyr – Match 88, Match 91
Walther – LG55, LGR, LGV, CG 90, CGM, LG 90, LG 200, LG 210, LGM-1, LGM-2
Winchester -- 333
76
In the rifle selections above some models have Junior, Running Target and Universal models.
These were not listed separately for space considerations but could be used for that model since the
power plant portion is the same as the regular model.
On the Junior models the barrel length and stock pull length is generally all that is different.
The Universal models will have different sight mounting methods and the stock will allow for some
adjustments.
The Running Target versions will have better provisions for scope mounting, a different style stock
and in some cases a different trigger than the regular model.
The student should bring a new mainspring or mainspring set as appropriate, piston seal and breech
seal for each spring piston gun and a set of seals for the other power plants, i.e. Single Stroke
Pneumatic and/or CO2. If you have any questions or doubts contact Randy. If anyone has a
problem getting any parts please contact me at least 3-4 weeks ahead of the class meeting time.
CLASSIC MATCH GUN -- Rifle
TOOL LIST
Mainspring compressor—Home made or commercial (Commercial available from JG Airguns)
5.5mm or 7/32 open or closed end wrench – Diana 75
10 mm Open end wrench – Gamo 126
1/8 inch Cape chisel – FWB 65 / 80 / 90 / 150 / 300
Devcon Weldit All Purpose Adhesive and Vinyl Mender S-182/18245 (for use in Anschutz 250
hydraulic cylinder to glue in the end seals)
AIRGUNSMITHING COURSE – GENERAL TOOL LIST
Safety glasses
Bench pad – rubber or similar to protect the gun
Soft jaws for the vise (felt, leather or molded plastic)
Assorted screwdrivers
Ball peen hammer (4 oz. Best)
Rawhide or non-marring hammer
Pin punch set
Roll pin punch set
Allen wrenches – SAE .050- ¼; Metric 1.5 – 6 mm
Assorted pliers – needle nose, slip joint, parallel action
Adjustable wrench – 8” best, 6” OK
Pin vises for holding small screws and pins
Files – 6” Swiss pattern pillar #2, #0
77
Needle file set #2
Dental picks – assorted
Deburring tool
Lathe tool bit – 3/8 or 1/2
12 gauge shotgun cleaning rod with slotted tip
3/8” variable speed drill (reversible is nice sometimes but not necessary)
Small flashlight – recommend Mag light with 2 AA batteries, it is bright and focuses to a spot for
looking down inside the tubes/compression cylinders or one with LED with several bulbs for a
bright beam
Paper towels – 1 roll
M-Pro 7 Gun Cleaner or Mil-Comm MC25 Gun Cleaner/Degreaser
M-Pro 7 Gun Oil LPX or Mil-Comm TW-25 Oil
Mil-Comm TW-25B Lubricating Light Grease
AlmagardVari Purpose Lubricant #3752 or Moly based grease
Rubbing alcohol – 91% is best, 70% OK
Plastic food storage tray (like Rubbermaid or similar), size 5-7” wide by 10-12” long and about 3”
deep max. A small inner tray to keep the screw and pins helps to keep things organized.
AIRGUNSMITHING COURSE -- SPRING PISTON GUNS TOOL LIST
All Manufacturers -- Mainspring compressor—Home made or commercial (Commercial available
from JG Airguns)
FWB 124 -- 11 mm Open end wrench or adjustable wrench
Marksman International Series -- 9 mm socket (1/4 or 3/8 drive)
Marksman International Series -- Circlip pliers
********************************************************
Alternative Finishes $380 or 2 credit hours
(course counts toward the Gunsmithing Fine Arts Certificate)
This class will explore some of the more common, non-traditional, finishes used in our industry.
These will include, but are not limited to, Parkerizing, Cerakote, and Gunkote. 2-3 Project guns
would be sufficient for this class, we will have test pieces available to practice on if there is a finish
that you would like to learn, but not put on your own firearm.
Lee Hadaway is a 1990 graduate of the TSJC Gunsmithing Program with an AAS and an
Advanced Firearms Repair certificate. Lee's first job out of school took him to Tulsa, Oklahoma.
There he worked for a shop that performed warranty repair work for most of the Wal-Marts in the
country. He performed warranty repairs for Smith & Wesson, Remington, Winchester, Browning,
Savage, Colt, and Mossberg repairing over 2000 firearms. He later bought into an existing business,
The Ammo Shop, Inc. which included retail sales, gunsmithing, pawn business, commercial ammo
manufacturing, and running the indoor range. Lee also contracted with The Ordnance Depot and
converted 65 Marlin Lever Actions into Takedowns. Eventually he went to work for Scattergun
78
Technologies and was put in charge of the Rebuild Program and performed the service of rebuilding
ragged out Law Enforcement 870s and 1100s. He performed work for over 200 Law Enforcement
Departments or Agencies, including FBI, DEA, INS, HUD, US Postal Inspectors, Federal Reserve
and US Marshals. In his spare time, Lee provided Gunsmithing services to Game Fair Limited, a
very high end gun shop. This gave Lee the opportunity to work on Purdy, Holland & Holland,
Westley Richards, Parker, and LC Smith side by sides. Lee chose to move back to Trinidad,
Colorado and teach for his old alma mater, Trinidad State Junior College. For 3 years, Lee taught
the Third Year Advanced Firearms Repair Program. He has also regularly taught Blueing,
Winchester High Wall I & II, and Shotgunsmithing. Lee has also taught in the NRA Summer
Program at Trinidad State. His summer classes are Takedown Lever Actions, Tactical Shotguns,
Handgun Repair, Long Gun Repair, and Blueing & Metal Finishing. He has operated The Arms
Room since 1999. www.thearmsroom.com email: [email protected]
Lee Hadaway
Tool List
Set of punches
Small ball peen hammer
Various hand tools for disassembling firearms
120, 220,240,320 grit aluminum oxide cloth backed polishing paper (10yds each)
Personal respirator, approved for painting applications
Safety Glasses
1 box (100) latex disposable gloves in your size
Assorted small 6-10 files in smooth to bastard cut
Paasche single action siphon feed airbrush. The H set works well. Order online or can usually be
picked up from Hobby Lobby. This is just a recommendation. Some air guns will be available for
class use.
Cerakote in your choice of colors. Gunkote will be available from the instructor for $5 per gun.
1 quart of Acetone or MEK
Projects to be worked on, if you have any questions please feel free to contact the instructor at the
email above.
**********************************************************
Small Business Management with an ATF Emphasis
$150 or 1 credit
79
Days 1 and 2 will cover all the areas for obtaining an FFL and record keeping requirements, how to
use the local office for information and to keep out of trouble, and shipping and receiving from
different states. The instructor will try to have an ATF officer come in and give their input on record
keeping and common compliance issues. Day 3 will cover general small business issues in the areas
of concern that most people overlook when starting a business, such as tax and license requirements,
unemployment and workmen’s comp., marketing, etc.
Bill Sturtevant is a graduate of the Trinidad State Gunsmithing program. He joined the full-time
Bill Sturtevant
No tools needed. Please bring a notepad and pen for taking notes.
************************************************************
Spur Making $375
Continuing ed only – not for college credit
Students will begin with pattern development and continue through the various processes of spur
making. These include jig and fixture design and construction. Fabrication of spur parts, welding,
80
grinding, sanding and finishing. Spurs built in this class should be of a simple design to allow time
to complete the project.
Prerequisite: Tig welding skills are an asset, however they are not required.
Frank {Buddy} Knight was raised on a ranch south of Marfa, Texas and learned from his father
and grandfather to appreciate quality gear. Early on he wanted to work with his hands and spur
making was a perfect fit. He built his first pair of spurs in the Vocational Agriculture Shop at Marfa
High School when he was fourteen.
His work has been displayed at The Trappings of Texas in The Museum of the Big Bend at Sul Ross
State University Alpine, Texas, at The Western Folk Life Center in Elko Nevada, The Cowboy
Classic in Phoenix Arizona, and The Trappings on the Llano at the Llano County Historical
Museum in Llano, Texas. He demonstrated spur making at the 25th Texas State Folk Life Festival at
the Institute of Texan Cultures in San Antonio, Texas.
Today Buddy operates a shop in Marfa, Texas. He produces bits, spurs, silver buckles, jewelry, and
some ornamental iron.
Buddy Knight
List of tools needed for spur making class
1. Jewelers saw
2. 2/0 or 4/0 jewelers saw blades --- about a dozen
3. Assorted files with handles
a. 6” or 8” half round
b. 6” square
c. 6’ or 8” three square slim taper--- 2nd cut
d. 8” or 10” flat
e. 4” half round or flat
f. 8 “ or 10” round
4. Hack saw
5. Layout dye
6. Scribe
7. Ball peen hammer
8. Stick or spray glue
9. 6” or 12” steel rule
Tools good to have but not necessary
81
1. Dye grinder with 3/8” radius end burr
2. Dremel tool with 3/8” or ¼” sanding drum and 60 grit sanding bands
Materials needed to build spurs
1 Heel band material
3/16” X ¾” or 1” or 1 ¼ x 8 ¼” long strap
2 Hanger materials
1/16” x ½” X 3” strap
Rowel blanks ¾” 1” 1 ¼ ” 1 ½
I buy these thing at:
Metal Fab Products
PO Box 14367
Odessa TX 79768
432 362 3617
Shank materials
2 options
3/8” X 2” or ½ X 2” mild steel bar stock
Can be purchased at any metal supply store
Button materials
Truss head rivets
¼” X ½” and 5/16” X ½” -- 2 each
I buy rivets at:
RJ Leahy Co.
1475 Yosemite Ave.
San Francisco, CA 94124
415 861 7161
********************************************************************************
CNC MILL & LATHE
$760 or 4 credits
Students are required to take both weeks of this class
This course will cover transitional information between conventional machining applications and
the typical applications found in Computer Numerical Control Machining. Topics may consist of
numerical control systems, the cartesian coordinate system, high efficiency tooling applications,
objectives of numerical control, calculating speed and feed rates, defining calculating tool motion,
fixturing requirements, basic program structure, programming codes, and basic conversational
programming. Operations of CNC machines will be required. Students will design for and program
a single spindle machine with live tooling. Students will expand their skills by learning proper tool
selection, feed and speed calculation, turning programming basics, milling programming basics, and
variable manipulation
Joel Sturtevant - Machining Instructor at TSJC. Joel captured a first- place gold medal in the
2012 SkillsUSA National Leadership and Skills Conference’s Machining category. Joel won his
gold medal in the Precision Machining Technology category in an intense competition that included
82
hands-on production with machining equipment, manual code writing with software, and
examinations on machine and shop theory
Joel Sturtevant
No tools or supplies are needed for this class other than a notebook and pen to take notes.
***********************************************************
Decorative Gun Stock Carving class with Jack Brooks
$650 or 2 credits
This five day class will be a study of traditional decorative carving as found on 18th century
American flintlock rifles. Students will learn to carve both incise and relief designs in the manner
of old masters from Christian's Spring, Lancaster, and Allentown, Pennsylvania. Jack will furnish
practice butt stock pieces that each student will carve and be able to take home as future reference.
Students will need their own set of carving tools which will be listed below.
Jack Brooks was born in Colorado, graduated from Englewood High School in 1966, and
attended University of Northern Colorado where he majored in chemistry (BA 1970 and MA 1972).
He built his first flintlock rifle in 1971. After working four years as a chemist he began making
flintlock rifles full time in 1976. Besides making new rifles, pistols, and fowlers; he began
collecting and restoring antique Kentucky rifles. This gave Jack the opportunity to study firsthand
the finest examples of 18th and 19th century American longrifles. His interest in Kentucky rifles
began when a child with Walt Disney's Davy Crockett TV series and John Wayne's movie “The
Alamo”. Many years later Jack, along with friends Bob Lienemann and Mike Branson, were asked
to make 14 guns for the 2004 remake of “The Alamo” movie. Jack's work has been displayed at
The Smithsonian Institute, the NRA Museum, and the Minneapolis Institute of Art. His guns have
also been featured in several magazines and books. Jack has authored many magazine articles and
has taught several years at the annual Gunsmith Seminar of the National Muzzle Loading Rifle
Association.
Jack Brooks
Carving Tool list
Wood carving gouges ( Swiss Made from Woodcraft recommended):
83
2mm No. 7
4mm No.7
6mm No. 7
10mm No. 7
18mm No. 7
20mm No.5
12mm No.3
2mm No. 9
2mm No. 1
5mm No. 1
8mm No.1
cabinet scraper
steel hand burnisher
raw hide or wooden mallet
three bench stones for sharpening (coarse, medium, and hard)
leather strop ( 3” by 12” piece of saddle leather will work)
desk lamp or work light
pencil and paper
*****************************************************************************
Powder Horns $375
This hands-on intensive course will instruct participants through the basics and many advanced
techniques of North American powder horn making and the application of scrimshaw, engrailing,
and other structural and embellishment techniques. Selection and preparation of various horn
materials, as well as layout and the execution of various techniques and designs will be covered.
While exotic and international powder horn styles will be covered, the emphasis will be on the
skilled creation of the North American style powder horn. In today’s world of powder horns, the
North American style is the one most sought after by collectors and black powder shooters. Special
artistic ability or experience is NOT needed to succeed in this class. Skills learned will be applicable
in either personal or professional pursuits.
Jim Stevens is a world renowned scrimshander, writer and artist. He has been commissioned to
create works of art for collectors throughout the world. Jim brings his expertise and his no-fail
attitude with him to inspire all who attend his classes, paving the way for all to express themselves
in a media that warms the soul. No other art form in American has a longer history. No other
expression of art has such significance or influence on the American spirit.
[email protected]
84
Jim Stevens
SCRIMSHAW AND POWDER HORN CLASSES TOOL/SUPPLY LIST
The most expensive item on the following list is less than $40. I have purchased everything on the
list and spent less than $100. All the items are small enough to carry in your luggage (don't pack
liquids or aerosol cans) but it is still easier to buy what you can from the College supply store.
Everyone will be given time on our first day to go to the supply store and purchase materials.
The College has a first-class tool, art and office supply store on campus. It is called "The Trek-Inn
Bookstore", phone 719-846-5610. Their prices seem to be equal to or less than prices on the
outside. Also, buying at the school store can definitely save you a lot of shopping or packing time.
You can even give them a call ahead of time and let them know what you need so you can be
assured they will have what you want when you arrive. If you already have any of these items, bring
them. There's no need to repeat your purchases.
Where to shop, source index:
(You can always order materials from the Internet if you prefer.) a=school store, b=local art store or
jewelry supply store or hardware store, c=local supermarket, d=local department store (like Walmart
or Kmart)
MATERIALS FOR BOTH SCRIMSHAW AND POWDER HORN CLASSES
Source
Item
a, b
One hobby knife handle (ie: X-Acto knife) (with rubber grip if you prefer)
a, b
Package of 5, #11 hobby knife blades
a, b
One small tube of Titanium White artist's oil paint
a, b
One small tube of Ivory Black artist's oil paint
a,b
One #2 pencil
a, b
One black aquarellable pencil (Stabilo or other brand)
a, b
One white aquarellable pencil (Stabilo or other brand)
a, b
One pencil sharpener (small hand held type)
a, b
One roll of transparent tape
a, b
One pair of scissors
a, b
One pink eraser
a, b
A clear plastic ruler (6 inches long is fine)
a, b
One small can of spray adhesive
a, b
One small bottle of rubbing alcohol
a, b
One small pair of pliers
a, b
One headband magnifier (ie: Opti-visor) (see note below)
a, b
Three sheets each of #400 and #600 wet/dry sandpaper
85
a, b
a, b
a, b
c,
c,
c,
d,
a, b
One package of .0000 steel wool pads
One paper dust mask (to use while sanding and polishing)
Safety glasses or goggles (required in school’s tool shops)
One small package of facial tissue
One package of assorted fine point, hand sewing needles
One small package of cotton swabs (Q-tip or other brand)
One small flexible-neck desk lamp. (see lighting note below)
One double-ended reversible pin vise (one end with zero minimum capacity)
ADDITIONAL MATERIALS ONLY FOR POWDER HORN CLASS
b,d
Hand-held rotary tool with set of small ball bits
(Rotary tools by WEN, Black & Decker, and others as low as $20 on
Amazon.com)
b,d
Set of small hobby hand files (usually comes in set of 6 miniature files in variety of
shapes)
a, b
Three sheets each of #100, #250, #350 wet/dry sandpaper
The Scrimshaw and Powder Horn materials in-class fee is $12. This covers the cost of ivory, Tagua
vegetable ivory, cattle horn, black buffalo horn, and other materials that I will have on hand for
special in-class projects. This is the only in-class fee. I will have all these materials on hand when
you arrive.
Headband Magnifier Note: If you have one, bring it. For those buying one for the first time, Optivisors headband magnifiers are one of the few that come with a choice of lenses. Lens powers are
designated by the numbers 3,5,7, and10. A #3 lens is 1x magnification and allows you to work about
14 inches from your material. Not much bending, but frankly not much help either. A #5 is 2x
magnification and allows you to work about 8 inches from your material. I find this is fine for most
work. A #10 gives 3x magnification but only about 4 inches of work distance. This is great for
minute details but can be hard on the back over long periods of time. I use a #5 Opti-visor lens for
general work and switch to a #10 for those times when I need the extra power for very fine details. I
guess the best advice I can give new buyers is to get what you think will work the best for you and
what fits your budget.
Other Types of Magnification: We will talk about opti-visors, microscopes, thread
counters, combination lamp/magnifiers, jewelers loupes, binocular loupes and other types
of magnifiers during the course. If you already use any of these magnifiers (or another)
and are comfortable and enjoy using what you have, go ahead and bring it.
Lighting (desk lamp note): Our classroom has good overhead light, however you'll soon learn that
you need additional lighting on your bench. This is why a desk lamp is on the materials list. Your
lamp should have a flexible neck and use a regular incandescent or low power tungsten bulb. What
you want is a lamp whose light can be positioned at a very low angle to the bench, with the back of
the lamp pointed towards you while reflecting light off the material you are working on.
Other Items: (Not required but nice. Bring them if you can.) Plastic box for your tools and supplies.
Notebook and pen (For taking notes during discussions). Seat cushion for your stool (they are hard).
Three old hand towels (to pad your work and your elbows and for wiping your fingers). Also bring
any additional tools and/or supplies you feel you may want or need, any artwork or pictures you
would like to work from, and a file folder for holding handouts.
86
Powder Horn Class Final Project: For your final project, I will have horns and materials on-hand.
You may bring your own horn if you have one you want to use instead.
I have no business relationship with them, but Powderhorns and More, Inc. is a
reputable company that has any material you may want for your final project. You
can go online to review their materials. Their web address is:
http://www.powderhornsandmore.com.
WEEK NINE July 25-29
Accurizing the 1911 $380 or 2 credits
In this course we will cover fit of a national match barrel and barrel bushing, fit of ambidextrous
safeties, fitting grip safeties, disassembly, parts nomenclature, re-assembly, cycle of operation, and
trouble shooting.
returned to TSJC as an instructor teaching Benchmetal, Firearms Conversions, Shotgun Smithing,
Bluing, and several Machine Shop classes.
[email protected]
office # 719-846-5525
Ryan Newport
Tool List
Depth micrometer if you have one (optional).
1. Cleaning rod and patches for 45 Auto
2. Roll of 1" wide (approximately) masking tape
3. Safety glasses with side shields
4. Shop towels (Minimum of 2 rolls)
5. Black magic marker
6. Small high intensity flashlight
7. Bench mat
8. Ball Peen Hammer, 4oz.
9. Nylon/Brass Hammer
10. Pin Punch 5/32"
11. Tools that you need to disassemble your 1911
87
a) Tools to remove grips (Screwdriver, Allen or Torx)
b) Barrel Bushing Wrench, Non Marring
c) Pin Punches (1/16", 1/8", 3/32")
d) Screwdriver or Allen wrench for Mag Catch Lock
e) Tweezers, 4-6"
12. Variable speed Dremel Tool (plug in model, no cordless models) with the following accessories:
a. 1/2” round stone medium coarseness
b. 1/4” round stone medium coarseness
c. 2-1/2” felt buffing wheels
d. 2-1/4” felt buffing wheels
Parts List:
All students will need a Government (5”) length fully operational and safe 1911 along with the
following parts list
1. National Match Full gunsmith Fit Barrel I recommend a Storm Lake oversized gunsmith fit
(Brownells part#842-000-115WB)
No semi fit, pre fit, or ramped barrels will be allowed in class.
2. Barrel Links (Wilson Combat #3, #4, #5. Brownells #965-142-000WB)
3. Barrel Link Pin
4. Oversized Barrel Bushing (Brownells #296-000-085WB)
5. Ambidextrous safety if desired to fit
6. Ed Brown style grip safety if desire to install
*******************************************************
Relining .22 Caliber Firearms
$380 or 2 credits
During this workshop the class will explore various avenues of relining and finishing .22 caliber
rifles that have the chambers and bores shot out. The student should have basic machine skills to
bore, face, chamber, and cut extractor slots and grooves. The students will examine various
finishing techniques to match the desired finished product. Pre-requisite: Basic Machine Shop
Jon Birkhold graduated from TSJC (1965) and holds BA and MA degrees from Adams State
University. Since graduation Jon has spent 2 years in the US Army, 30 years teaching industrial arts
(machine shop) in Ohio. He has also been a gunsmith and riflesmith for Baldridge Sports, Danville,
Ohio about 7 years and 12 years with Whitetail Gunsmithing of Loudonville, Ohio. While at
Whitetail Gunsmithing, he has 10-years of experience in relining .22 caliber rifles and has
rebarreled and blueprinted numerous center fire rifles. He has attended Smith and Wesson Armorer
schools on pistols and revolvers and numerous workshops at TSJC. Also he is the manufacturer of
Brownells Alignment Punches. [email protected] Phone 740-599-7905 (mornings only)
Jon Birkhold
88
Tools/Supplies
Barrel liner drill (Brownells part # 361-504-008)
Barrel iner, .22LR (Brownells part # 770-100-022)
Drill rod no larger than .281” diameter
1” round bar stock, 6” long
2, 1/4x20 TPI ¾”, hex head screws
2 fired .22LR cases
Files, 10” MLL Bastard
Modeling Clay
680 or 290 LOC-tite
Depth micrometer
.22LR Chambering reamer
.22 LR Head space gages, go and no-go
Vans Cold Blue or other
Mark Lees Express blue #1 (Brownells # 575-200-004)
Mark Lees Express Brown #2 (Brownells # 575-100-004)
2 bore plugs (Brownells # 082-201-100)
Q-tips
Lathe tools for facing and crowning
.22LR rifle of choice to be relined (Stevens Favorite, 1890 Winchester, etc.)
Empty one gal. plastic oil container
Oil can, pump type
Cutting fluid such as Hardcut 258 light or similar oils
Acid brushes – 2
Tablet of graph paper, ¼” grid
Rd. nose scraper
Assortment of abrasive cloth, to 400 grit
3 rubber faucet gaskets, apx. 1/2’
90 degree muzzle facing cutter (Brownells # 080-947-239AK)
**********************************************************
Three-piece Buckle Class $375
Non credit only – not for college credit
Students will learn to design and make a steel buckle, keeper and tip. Techniques for mounting
decorative designs made of copper, nickel, or brass on buckles or spurs will also be covered.
Frank {Buddy} Knight was raised on a ranch south of Marfa, Texas and learned from his father
and grandfather to appreciate quality gear. Early on he wanted to work with his hands and spur
making was a perfect fit. He built his first pair of spurs in the Vocational Agriculture Shop at Marfa
High School when he was fourteen.
89
His work has been displayed at The Trappings of Texas in The Museum of the Big Bend at Sul Ross
State University Alpine, Texas, at The Western Folk Life Center in Elko Nevada, The Cowboy
Classic in Phoenix Arizona, and The Trappings on the Llano at the Llano County Historical
Museum in Llano, Texas. He demonstrated spur making at the 25th Texas State Folk Life Festival at
the Institute of Texan Cultures in San Antonio, Texas.
Today Buddy operates a shop in Marfa, Texas. He produces bits, spurs, silver buckles, jewelry, and
some ornamental iron.
Buddy Knight
Tools
1
2
3
4
5
6” or 8” half round files
6” or 8” flat file
Jewelers saw with 2/0, 3/0, or 4/0 saw blades
Hacksaw
Small ball peen hammer
Materials
1.
2.
3.
4.
5.
6.
StaSilv or High force 44 solder with flux from Brownells or Indian jewelers supply
22 gauge nickel silver, copper or brass, sheet from Indian jewelers supply
22 gauge mild steel sheet from Metal Fab Products in Odessa TX
16 gauge mild steel sheet
1/8” steel strap at least 3” wide and 6” long
5/32” steel rod
*******************************************************************************
Decorative Metal Inlay class with Jack Brooks
$650
90
Non credit only – not for college credit
Gun stocks on fine 18th century firearms were often decorated with inlays of brass, silver, or even
gold. Some inlays were shaped from sheet metal and inlaid into the wood while other work was
done by inlaying ribbons of metal creating delicate patterns which is often called “wire inlay”. Also
the two techniques were sometimes combined along with engraved accents with beautiful effect.
In this class students will learn how to do this type of traditional decoration. Each student will be
provided practice pieces of maple or walnut for their inlay work. Attention will be paid to design,
tools, technique, simple engraving, and wood finish.
Jack Brooks was born in Colorado, graduated from Englewood High School in 1966, and
attended University of Northern Colorado where he majored in chemistry (BA 1970 and MA 1972).
He built his first flintlock rifle in 1971. After working four years as a chemist he began making
flintlock rifles full time in 1976. Besides making new rifles, pistols, and fowlers; he began
collecting and restoring antique Kentucky rifles. This gave Jack the opportunity to study firsthand
the finest examples of 18th and 19th century American longrifles. His interest in Kentucky rifles
began when a child with Walt Disney's Davy Crockett TV series and John Wayne's movie “The
Alamo”. Many years later Jack, along with friends Bob Lienemann and Mike Branson, were asked
to make 14 guns for the 2004 remake of “The Alamo” movie. Jack's work has been displayed at
The Smithsonian Institute, the NRA Museum, and the Minneapolis Institute of Art. His guns have
also been featured in several magazines and books. Jack has authored many magazine articles and
has taught several years at the annual Gunsmith Seminar of the National Muzzle Loading Rifle
Association.
Jack Brooks
Metal Inlay Tool list
Tools and Materials List
drill bits in following sizes: No. 68, 65, 56, 55, 53, and 52
small hand drill electric or hand with chuck that will take above drill bit sizes
scissors
small dividers (4-6”)
10” mill file
4” mill file
small ( 3 or 4oz) ball peen hammer
1 mm wood chisel
2 mm wood chisel
5 mm wood chisel
pair of small pliers
pair of small nippers
metal scribe
pencil
91
candle for sooting
jeweler's saw
2 dozen #1 saw blades for jeweler's saw
metal counter sink
12” metal straight edge rule
3 bench stones (course, medium, and fine)
leather strop
Semi Chrome polish
small pocket or pen knife
wet dry sand paper for metal (220, 320, 400, 600, 800, 1000 grits)
square graver and chasing hammer for engraving
round sterling silver wire, two feet of each of these three sizes: 19 gauge, 16 gauge, and 14 gauge
2” by 6” piece of sterling silver 22 gauge ( a good source for silver is Rio Grande Jewelry,
Albuquerque, NM 87121, phone 800-545-6566, web www.riogrande.com)
If you have questions call Jack Brooks at 303-789-4029.
*******************************************************************************
Capstone Project for Gunsmithing Arts Certificate
GUS 289 - Gunsmithing Arts Capstone
This course will be arranged with TSJC staff once the student has reached the point in their NRA
Gunsmithing Arts training to complete this requirement.
Provides practical application of the skills learned in the TSJC/NRA Gunsmithing Arts course series
using a capstone project model. The student will plan and execute a finished engraving, scrimshaw, or
other gunsmithing arts related project as agreed upon with their supervising instructor. This is the final
course in the TSJC/NRA Gunsmithing Arts Certificate program.
Credit Hours:2
Outline and Competencies –TBA
************************************************************************
TSJC/NRA 2016 SUMMER COURSE REGISTRATION SHEET
Date: _______/______/____________ D.O.B.:
_________________________________
Name: ___________________________Please Provide a Valid Student ID # or Social Security #
Mailing Address: ____________________________TSJC Student #:_S____________________
City: _____________________________ or Social Security#: __________________________
State: ________________Zip:__________ Country: ___________________________________
Phone: _____________________________ Cell: ______________________________________
Email: _____________________________ Emergency Contact #: _________________________
Name of Emergency Contact & Relationship to you: _____________________________________
ARE YOU A COLORADO RESIDENT
______ yes _______ no
92
Please be sure to circle check whether you are taking EACH class as continuing education (CE) or for
credit(Credit). Note: single housing $120 per week – married housing $150 per week – check off S
or M to indicate which type of housing you need. Daily rate are available for those taking shortterm classes
Week 1 – May 30-June 3_______________________________
CE
Credit
On Campus Housing – S__ M __
Week 1 Cost:
Housing Cost:
________________
________________
Week 2 – June 6-10
CE
Credit
_______________________________
On Campus Housing -S__ M __
Week 2 Cost:
Housing Cost:
________________
________________
CE
Credit
_______________________________
Week 3 Cost:
Housing Cost:
________________
________________
CE
Credit
_______________________________
Week 4 Cost:
Housing Cost:
________________
________________
Week 5 – June 27-July 1 _______________________________
CE
Credit
Week5 Cost:
Housing Cost:
________________
________________
Week 6 – July 4-8
CE
Credit
_______________________________
Week 6 Cost:
HousingCost:
________________
________________
Week 7 – July 11-15
CE
Credit
_______________________________
Week 7 Cost:
Housing Cost:
________________
________________
CE
Credit
_______________________________
Week 8 Cost:
Housing Cost:
________________
________________
CE
Credit
_______________________________
Week 9 Cost:
Housing Cost:
One-time Registration Fee
________________
________________
$12.85
Total due for all courses and campus housing $______________
CHECK #______________ PAYABLE TO: TRINIDAD STATE JUNIOR COLLEGE
VISA:
MASTER CARD:
DISCOVER:
DEBIT: PIN#:_____________
CARD#:___________________________________________ EXPIRATION DATE: ______/_____/___
I certify that I am able to own and possess firearms.
Date:
___________/ ______/_________
Signature:
____________________________________
Registration Form Instructions
If you have attended TSJC previously and don’t know your student or “S” number, you
may contact Donna Haddow at 719-846-5541 or 1-800-672-8752 ext. 5541 [email protected] to obtain your number or simply fill in the last four digits
of your Social Security number. If you have not attended in the past, we need your Social
Security number.
93
Because classes are now offered for credit or as continuing education, please be sure to
circle CREDIT or CE on the form. Tuition is as follows:
Continuing Education or Colorado Resident for credit $380.00
Out-of State, for credit -- please contact Donna
*Note – tuition for some continuing education courses may vary
Colorado residents taking classes for credit will need to register for the College Opportunity Fund.
Registration may be done by clicking here or by visiting our website at www.trinidadstate.edu and
clicking on the COF button. If you took classes for credit previously, you do not need to register
for COF again. If you are not registered for COF, you will not receive the credit on your account
and will pay higher tuition.
New this year is the option for married student housing. Please mark on the bottom of the
form if you will require married accommodations. Single students are $120 per week,
married rooms $150 per week. Daily rate $20 for single, $30 for married couples. NO
CHILDREN ARE ALLOWED, COUPLES ONLY
If you have any questions, please feel free to contact me
Donna
Donna Haddow
Executive Assistant to the President
andNRA Coordinator
600 Prospect Street
Trinidad, CO 81082
94
95
WHAT WHAT
TO DO IN AND AROUND TRINIDAD
http://historictrinidad.com/tourism.html
Outdoor activities in the area include hiking, fishing, camping, horseback riding,
backpacking and bicycling and motorcycling. At scenic Trinidad Lake State Park,
about three miles west of Trinidad off the Scenic Highway of Legends (Highway 12)
provides a place for fishing and water sports such as boating, sailing and water skiing.
Camping is available.
The City of Trinidad has an outstanding nine-hole Municipal Golf Course.
Monument Lake Resort, located 36 miles west of Trinidad in the Sangre de Cristo
Mountains, is an ideal fishing spot. Campgrounds and a 20-unit lodge are available to
visitors.
For history and art buffs, Trinidad has the Trinidad History Museum with the Bloom
Mansion (a Victorian house built in 1882), the Baca House (a Territorial-style adobe
built in 1869) and the Santa Fe Trail Museum. The Louden-Henritze Archaeology
Museum, located in the Freudenthal Memorial Library on the Trinidad state Junior
College campus, contains fossils, artifacts, and dioramas pertaining to the geology and
prehistory of the region. The A.R. Mitchell Museum of Western Art features the work
of western artist and illustrator A.R. Mitchell plus the works of other known artists. The
Aultman Photographic collection is also housed at the Mitchell.
Park your car and explore historic Trinidad in style. Take a ride on the Trinidad
Trolley. It’s free and you can get off and back on as often as you like.
The scenic Highway of Legends, from Trinidad to Walsenburg (Highway 12), has
marvelous scenery and many interesting historic legends.
By taking a short drive south to New Mexico, such attractions as the NRA Whittington
Center in Raton and Mount Capulin – an extraordinary extinct volcano near
Capulin, NM can be seen. Taos is also nearby.
The sites listed below will provide you with an abundance of information on things to do
and places to see while you are visiting the area.
www.historictrinidad.com/tourism/tourism.html
http://www.trinidadchamber.com/index.html
http://www.sangres.com/colorado/lasanimas/trinidad.htm
http://www.colorado.com/colorado-welcome-center-trinidad
96
Activities
Trinidad’s public green spaces are second to none for a town of its size. In addition to its worldclass skate park, a new and radical disc golf course, and a river walk, four public parks offer
bocce ball, fishing, running trails, soccer, basketball, baseball, and playgrounds as well as a
historic band shell for public concerts. Trinidad has a historic nine-hole golf course as well as a
new Nicklaus Design course at Cougar Canyon.
At the junction of Scenic Highway of Legends lake country and Santa Fe Trail Scenic Byway
grasslands and canyons, Trinidad is the gateway to unparalleled opportunities for recreation
and daytrips in southern Colorado.st en
Trinidad’s River walk, part of the
town’s expanding trails system,
meanders for 3.5 miles along the
lazy Purgatoire River.
Historic Kit Carson Park has a
Victorian band shell, bike paths,
and a cast bronze statue of
Kit Carson, considered one of
the finest equestrian works in the
country.
Avid Golfer rates Trinidad’s municipal
golf course one of the “ten hidden
gems in the country.” More on
golfing in Trinidad.
97
Los Nino’s Soccer Complex is one
of Trinidad’s newest parks.
Central Park’s pond is stocked with
rainbow trout for fishing by the
under-14 set only.
Trinidad’s skatepark is rated ninth
in the world by champion skater
Tony Hawk. With lots of lines and
no kinks, the skatepark provides
fast full-arena runs and also
accommodates the young
ones.
Cimino Downtown Park, bordering
Trinidad's riverwalk, has a state-ofthe-art playground and fountain that
welcome youngsters as well as a
lighted bocce ball court for quiet
sundown evenings.
98
Trinidad's Family Aquatic Center opened in June 2008. It is located at South Side Park near the town's
world-class skate park, Frisbee golf park, and community center.
The center includes a wading pool for toddlers, a 140-foot "flume" slide, six-lane lap pool, concession area,
"funbrellas" offering shade, and tables and chairs for relaxing. Dressing rooms have a separate area for families.
The entire center is ADA accessible. 719-846-2675 or 719-846-4454 x14.
Open swim is 1pm-5:40pm every day.
Other swim times:
Lap Swim: Mon 6pm-7:20pm, Sat & Sun 9:30am-10:30am.
Sr. Citizen Lap Swim: Sat & Sun 12pm-12:50pm
Family Swim: Tues, Wed, Thurs, Fri 6pm-7:20pm, Sat & Sun 10am-12pm.
Moms and Tots: Tues 12pm-12:50pm
NRA Whittington Center: http://www.nrawc.org/index.html
Southern Colorado Repertory Theater:
http://www.scrtheatre.com/scrtheatre.com/Home.html
Trinidad Lake State Park:
http://parks.state.co.us/Parks/TrinidadLake/Pages/TrinidadStateParkHome.aspx
Earth Mountain Education Farm: earthmountainfarm.org
Picketwire Canyon: http://www.exploresoutheastcolorado.com/picketwire.htm
Trinidad Triggers Baseball Teamhttp://www.trinidadtriggers.com
99
The Fine Print
While attending classes at TSJC, all students must adhere to the Student Code of Conduct
Student Code of Conduct
Conduct that violates student rights and freedoms and is subject to disciplinary action
includes, but is not limited to:
1. Academic Misconduct:
Plagiarizing, cheating, or committing any other form of academic misconduct including, but not limited to,
unauthorized collaboration, falsification of information, and/or helping someone else violate reasonable
standards for academic behavior. Students who engage in any type of academic dishonesty are subject to
both academic consequences as determined by the instructor and to disciplinary action as outlined in the
Trinidad State Junior College disciplinary procedures.
2. Disruptive Behavior:
Engaging in any disruptive behavior that negatively affects or impedes teaching or learning (regardless of
mode of delivery or class setting); or disrupts the general operation of Trinidad State Junior College.
3. Deceitful Acts:
Engaging in deceitful acts, including, but not limited to: forgery, falsification, alteration, misrepresentation,
non-disclosure, or misuse of documents, records, identification and/or educational materials.
4. Conduct that is Detrimental to College or to Safety:
Conduct that is deemed detrimental, harmful and/or damaging to Trinidad State Junior College and/or
that jeopardizes the safety of others as determined by the Chief Student Services Officer. Examples include,
but are not limited to, slamming doors, throwing chairs, and/or defacing of college property.
1.
Physical/Non-physical Abuse:
Physical abuse or conduct that threatens or endangers another person’s health or safety.
Non-physical abuse, threats, intimidation, coercion, influence, or any unwelcome conduct in any form that is
sufficiently severe, pervasive or persistent that it alters the conditions of the learning environment or
employment. Knowingly falsifying, publishing or distributing, in any form, material that tends to impeach the
honesty, integrity, virtue or reputation of another person.
6. Harassment and/or Discrimination:
Discrimination or harassment on the basis of sex/gender, race. color, age, creed, national or ethnic origin,
physical or mental disability, veteran status, pregnancy status, religion or sexual orientation.
7. Sexual Misconduct:
Sexual Misconduct offenses include, but are not limited to Sexual Harassment, Non-Consensual Sexual
Contact (or attempts to commit same), Non-Consensual Sexual Intercourse (or attempts to commit same),
and/or Sexual Exploitation.
(See SP 4-120a for more information: http://www.cccs.edu/SBCCOE/Policies/SP/PDF/SP4-120a.pdf)
9.Narcotics/Alcohol:
100
Use, being under the influence, manufacturing, possession, cultivating, distribution, purchase, or sale of
alcohol and/or drugs (illegal and/or dangerous or controlled substance) and/or alcohol/drug paraphernalia
while on college owned or college controlled property, and/or at any function authorized or supervised by
Trinidad State Junior College and/or in state owned or leased vehicles.
Note: Although possession and use of marijuana consistent with the requirement of the Colorado Constitution
is no longer a crime in the State of Colorado, the possession and use of marijuana remains illegal under
federal law. Consistent with federal law, including the Controlled Substances Act and the Drug Free Schools
and Communities Act, the use and/or possession of marijuana continues to be prohibited while a student is
on college owned or college controlled property, and/or any function authorized or supervised by Trinidad
State Junior College and/or in state owned or leased vehicles.
10. Dress Code:
:
Dress or personal hygiene that fails to meet the established safety or health standards of specific classes or
activities offered by Trinidad State Junior College.
11.Leaving Children Unattended:
Leaving children unattended or unsupervised in campus buildings or on campus grounds unless enrolled or
participating in authorized campus activities.
12.Violation of Laws, Directives, and Signage:
Violating any municipal, county, state or federal law that adversely impacts the conditions of the educational
or employment environment. Violations of college traffic and parking rules, regulations, or signage. Creating
an intentional obstruction that unreasonably interferes with freedom of movement, either pedestrian or
vehicular. This includes, but is not limited to leading or inciting to disrupt college activities. Failure to comply
with the lawful directives of Trinidad State Junior College employees acting within the scope of their duties,
including those directives issued by a Trinidad State Junior College administrator to ensure the safety and
well-being of others. Violations of college policies, protocols, procedures or signage.
13. Illegal Gambling:
Participation in illegal gambling activities on college owned or college controlled property, and/or any function
authorized or supervised by Trinidad State Junior College and/or in state owned or leased vehicles.
14.Unauthorized Entry and/or Unauthorized Possession:
Entry into, or use of any building, room, or other Trinidad State Junior College owned or Trinidad State Junior
College controlled property, grounds, or activities without authorized approval. This also includes, but is not
limited to the unauthorized possession, duplication or use of college keys, lock combinations, access codes,
and access cards and/or credentials and/or propping open or tampering with doors/windows.
15. Unacceptable Use of College Equipment, Network or System:
Unacceptable uses of any Trinidad State Junior College owned or operated equipment, network
or system including, but not limited to: knowingly spreading computer viruses; reposting personal
communications without author’s consent; copying protected materials; using the network for financial or
personal gain, commercial activity , or illegal activity; accessing the network using another individuals
account; unauthorized downloading/uploading software and/or digital video or music; downloading/
uploading, viewing or displaying pornographic content, or any other attempt to compromise network integrity.
16.Unauthorized Pets/Animals:
Possession of any unauthorized pet or animals and or assistance animals, while on college-owned or
college-controlled property.
101
17.Tampering with Student Organization, Election, or Vote:
Tampering with the process of any college recognized student organization, election or vote.
18.Group or Organization Conduct:
Students who are members of a college recognized student organization or group and commit a violation of
the Student Code of Conduct may be accountable both as an individual and as a member of the
student organization.
19.Abuse of the Student Disciplinary and/or Grievance Procedure:
Abuse of the Student Disciplinary and/or Grievance Procedure includes, but is not limited to the
following:
• Disruption or interference with the orderly conduct of the student disciplinary/ grievance procedure.
• Falsification, distortion, or misrepresentation, or knowingly pursuing malicious, frivolous, or fraudulent
charges.
• Attempting to discourage an individual’s proper participation in, or use of, the student disciplinary/grievance
procedure.
• Attempting to influence the impartiality of a participant and/or the student disciplinary / grievance procedure.
• Harassment (verbal or physical) and/or intimidation of a participant in the student disciplinary / grievance
procedure.
• Failure to comply with directives and/or sanctions imposed under student disciplinary / grievance procedure.
• Influencing or attempting to influence another person to commit an abuse of the student
disciplinary/grievance procedure.
• Engaging in retaliatory acts in any form against any person or person(s) involved in the student disciplinary /
grieve procedure
Grievance procedure
20.Unauthorized Entry into College Events:
Entering or attempting to enter any Trinidad State Junior College sponsored activity without proper
credentials for admission. It is the intent of this code to ensure students at TSJC neither lose their rights nor
escape the responsibility of citizenship in the college community. While the activities covered by the laws
of the larger community and those covered by TSJC’s rules may overlap, it is important to note that the
community’s laws and TSJC’s rules operate independently and that they do not substitute for each other.
TSJC may pursue enforcement of its own rules whether or not legal proceedings are underway or in
prospect, and may use information from third party sources (such as law enforcement agencies and the
courts) to determine whether TSJC conduct has been violated. A TSJC student is not exempt from local,
state, or federal laws and TSJC students have the additional obligation of abiding by all of TSJC’s
regulations. It is the personal responsibility of every member of the campus community not only to protect
his/her own rights, but to respect the rights of others and conduct themselves in a manner conductive to
learning in an educational environment.
Student Code of Conduct:
Basis: Students are expected to adhere to the Student Code of Conduct and policies and procedures of
Trinidad State Junior College (TSJC). If a student is charged with violating the TSJC Code of Conduct, these
are the procedures to be used in resolving the charge.
102
Definitions:
Chief Student Services Officer (CSSO):The individual designated by the TSJC President
to administer student affairs and be responsible for administering the TSJC Student Code
of Conduct and this procedure. The CSSO may delegate student discipline to another
individual (designee).
Code of Conduct: A document developed and published by TSJC which defines prescribed
conduct of students.
Complainant(s): A person(s) who is subject to the alleged misconduct or related retaliation.
For purposes of this procedure, a complainant can be a CCCS/TSJC employee(s), TSJC
student(s), authorized volunteer(s), guest(s), or visitor(s).
Day: Refers to working day unless otherwise noted below.
Jurisdiction: Applies to behaviors that take place on the campus, at System or TSJC sponsored events; and
may also apply off-campus and to online activity when the Chief Student Services Officer (CSSO), or
designee, determines that the off-campus conduct affects a substantial System or TSJC interest. A
substantial TSJC interest is defined to include the following:
• Any action that constitutes criminal offense as defined by Federal or Colorado law. This includes, but is not
limited to, single or repeat violations of any local, state or Federal law committed in the municipality where the
System or TSJC is located;
• Any situation where it appears that the accused individual may present a danger or threat to the health or
safety of self or others; • Any situation that significantly impinges upon the rights, property or achievements
of self or others or significantly breaches the peace and/or causes social
disorder; and/or
• Any situation that is detrimental to the educational interests of the System or TSJC. Any online postings or
other electronic communication by students, including cyber-bullying, cyber-stalking, cyber-harassment, etc.
occurring completely outside of the System or the College’s control (e.g., not on System or TSJC networks,
websites or between System or TSJC email accounts) will only be subject to this procedure when those
online behaviors can be shown to cause a substantial on-campus disruption. Otherwise, such
communications are considered speech protected by the First Amendment to the Constitution.
Notice: Notices which are required to be given by this procedure shall be considered served upon the student
when given by personal delivery, mailing by certified mail, or emailing the student to their official TSJC email
address requesting a delivery receipt notification. If notice is mailed, student shall be given three (3)
additional days to respond.
Respondent: A student whose alleged conduct is the subject of a complaint or incident.
Retaliatory Acts: Include but not limited to intimidation, verbal or physical threats, harassment, coercion, or
other adverse action(s) against a person who reports an incident of misconduct.
Sanctions:
One or more of the following may be imposed when there is a finding that a student has violated the TSJC
Code of Conduct:
1. Warning: A Notice served upon the student advising her/him that he/she is violating or has violated TSJC
regulations.
2. Probation: After a finding of violation of the Code of Conduct, restriction of student’s privileges for a
designated period of time including the probability of more severe disciplinary sanctions if the student is
found to be violating any TSJC regulations during the probationary period.
103
3. Other Disciplinary Sanction: Fines, restitution, denial of privileges (including extra-curricular activities or
holding office in student organizations), assignment to perform services for the benefit of TSJC or community;
educational sanctions such as mediation, letter of reflection, attendance at a workshop, seminar, or training
writing a letter of apology seeking academic advising; re-assignment or eviction from campus housing,
substance abuse screening, re-assignment to another class section, including a potential online section, or
other sanction that doesn’t result in the student being denied the right of attending classes, or any
combination of these.
4. College Suspension or Expulsion: An involuntary separation of the student from TSJC for misconduct not
based on academic performance for a specified period of time.
a. Suspension is a separation that shall not exceed three academic terms (including summer term)
per suspension for any singular offense or situation. While a student is suspended, he or she is not
eligible for admission or re-admission at any of the community Colleges within the System.
Additionally, if a student is suspended at any of the other Auraria Campus Institutions (i.e.,
Metropolitan State University of Denver [MSUD] or the University of Colorado Denver [UCD]), he or
she will not be eligible for admission or re-admission at the Community College of Denver (CCD).
Consequently, if a student is suspended at MSUD or UCD and attempts to enroll at one of the other
twelve community Colleges within the System, he or she may be denied pursuant to the process
under Board Policy 4-10, Admission, Continued Enrollment and Re-enrollment of Students. Once the
suspension is lifted at any of the community Colleges within the System, MSUD or UCD, the student
may be eligible for admission or re-admission. Examples of suspension include, but are not limited to
the following: the College, a department or program, a class, use of a College facility or an activity.
Students may be suspended from one class period by the responsible faculty member or adjunct
instructor. Longer suspensions can only be implemented by
the CSSO or designee in accordance with this procedure.
b. Expulsion is an indefinite separation from TSJC. The expelled student is not eligible for admission
or re-admission at any of the community Colleges within the System. Additionally, if a student is
expelled at MSUD or UCD, he or she will not be eligible for admission or re-admission at CCD.
Consequently, if a student is expelled at MSUD or UCD and attempts to enroll at one of the other
twelve community Colleges within the System, he or she may be denied pursuant to the process
under Board Policy 4-10, Admission, Continued Enrollment and Re-enrollment of Students.
In exceptional cases where a student wants to be considered for admission or re-admission after an
expulsion has been implemented, the student bears the burden to prove that the behavior resulting in
the expulsion has been resolved. It is the College’s discretion to admit or deny the student.
5. Interim Action: An immediate action taken by the CSSO or designee, to ensure the safety and well-being of
members of the System or TSJC community; preservation of System or TSJC property; or if the student
poses a definite threat of disruption or interference to others or the normal operations of the System or TSJC.
In the event of an interim action, the hearing before the CSSO or designee shall occur as soon as possible
following the interim action. If TSJC issues a permanent sanction, the student shall be afforded appeal rights
as discussed below. If TSJC does not implement a permanent sanction, the interim action will be removed
from the student’s record.
6. TSJC may issue a “Cease Communications”, “No Contact”, and/or “No Trespass” directive, also referred to
as a persona non grata.
Student: All persons currently taking courses at or sponsored by the College(s), pursuing either credit or noncredit courses (or both), including those concurrently attending secondary or post-secondary institutions and
College. Persons who are not officially enrolled for a specific term, but who have a continuing relationship
with TSJC are considered students.
Continuing Relationship: : A student registered for an upcoming term or has indicated intent via a transaction
such as a financial aid application to register for an upcoming term. A continuing relationship also includes
students who are first time enrollees who engage in misconduct prior to the time of enrollment. For students
in a continuing relationship status, jurisdiction and the reasonable person standard must be considered in
104
pursuing disciplinary charges. The Student Conduct Code shall apply to a student’s conduct even if the
student withdraws from school while a disciplinary matter is pending.
Title IX Coordinator(s) and Title VI and VII Coordinator(s) (EO Coordinator): Designated by
the College President to oversee all civil rights complaints.
Training: All TSJC officials involved with the investigation and discipline process will be trained annually on
the issues related to domestic violence, dating violence, sexual assault, and stalking.
Procedures: The CSSO or designee shall receive all allegations of student misconduct, investigate the
complaints, which includes meeting with the student to give him/her the
opportunity to respond to the allegations of misconduct. If the allegations of misconduct are discrimination
and/or harassment based on federal or state civil rights laws, TSJC will investigate those incidents through
the Civil Rights Grievance and Investigation Process, System President’s Procedures (SP) 3-50b and (SP) 431a via the following link: https://www.cccs.edu/about-cccs/state-board/policies-procedures/. Once the
investigation is complete, either through this process or the Civil Rights Grievance and Investigation Process,
the CSSO or designee shall render a sanction decision.
The CSSO or designee may decide that the charges can be disposed of administratively by mutual consent
of the parties involved on a basis acceptable to them. If an administrative resolution is not achieved, the
CSSO or designee shall issue a decision which determines whether the alleged conduct occurred; whether
the conduct violated the Code of Conduct or TSJC procedures; and impose a sanction(s) if appropriate.
In cases of domestic violence, dating violence, sexual assault and stalking, the complainant and the
respondent will be notified simultaneously in writing of the outcome of any disciplinary proceeding, as well as
any changes to those results or disciplinary actions prior to the time that such results become final and shall
be given the rationale for the discipline decision. The student shall receive written notice of the decision and
be advised of her/his right to appeal the decision, subject to the grounds below, by filing a written appeal with
the CSSO or designee within seven (7) days of service of the decision.
Appeal: In the event of an appeal, the CSSO or designee shall give written notice to the other party (e.g., if
the accused student appeals, the appeal is shared with the complainant who may also wish to file a
response), and then the CSSO or designee will draft a response memorandum (also shared with all parties).
All appeals and responses are then forwarded to the Appeals Officer or committee for initial review to
determine if the appeal meets the limited grounds and is timely. The original finding(s) and sanction(s) will
stand if the appeal is not timely or substantively eligible, and the decision is final. If the appeal has standing,
the documentation is reviewed. Because the original finding(s) and sanction(s) are presumed to have been
decided reasonably and appropriately, the party appealing the decision must specifically cite the error(s) in
the original determination on which the appeal is based. The only grounds for appeal are as follows:
1. A material procedural or substantive error occurred that significantly impacted the outcome of the hearing
(e.g. substantiated bias, material deviation from established procedures); which must be explained in the
written appeal; or
2. To consider new evidence, unavailable during the investigation or hearing that could substantially impact
the original finding or sanction. A summary of this new evidence and its potential impact must be included in
the written appeal, as well as the reasons the new evidence was not available during the original proceeding.
Failure to participate in the initial process does not constitute as new information for the appeal
process If the Appeals Officer or committee determines that a material procedural or substantive
error occurred, it may return the complaint to the CSSO or designee with instructions to reconvene, in order
to cure the error. In rare cases of bias, where the procedural or substantive error cannot be cured by the
CSSO or designee, the Appeals Officer or committee may order that a new hearing be held by a different
individual acting in the place of the designated CSSO or designee. The results of a reconvened hearing
cannot be appealed. The results of a new hearing can be appealed once on (either or both of) the two
applicable grounds for appeals. If the Appeals Officer or committee determines that new evidence should be
considered, it will return the complaint to the CSSO or designee to reconsider in light of the new evidence,
only. If the subject matter pertains to civil rights violations pursuant to SP 4-31a, the Appeals Officer or
105
committee will return the complaint to the Title IX/EO Coordinator to reconsider in light of the new evidence,
only. The reconsideration of the CSSO, designee, or Title IX/EO Coordinator is not appealable.
The procedures governing the hearing of appeals include the following:
• All parties should be timely informed of the status of requests for appeal, the status of the appeal
consideration, and the results of the appeal decision.
• If the Appeals Officer or committee determines there is new evidence or error in the original proceeding,
every opportunity to return the appeal to the CSSO or designee for reconsideration (remand) should be
pursued.
• Appeals are not intended to be a full rehearing of the complaint (de novo). In most cases, appeals are
confined to a review of the written documentation or record of the original hearing, and pertinent
documentation regarding the grounds for appeal.
• An appeal is not an opportunity for an Appeals Officer or committee to substitute their judgment for that of
the CSSO or designee, merely because they disagree with her/his finding and/or sanctions.
• Appeals decisions are to be deferential to the original decision, making changes to the findings only where
there is clear error and a compelling justification to do so.
• Sanctions imposed are implemented immediately, unless the CSSO or designee stays their implementation
in extraordinary circumstances, pending the outcome of the appeal.
• The Appeals Officer or committee will render a written decision on the appeal to all parties within seven (7)
days of receiving the appeal request. The committee’s decision to deny appeal requests is final.
Additional Process Provisions:
• The student may have the opportunity to be advised by a personal advisor of their choice, at their expense,
at any stage of the process and to be accompanied by that advisor at any meeting or hearing. An advisor
may only consult and advise her/his advisee, but not speak for the advisee at any meeting or hearing. These
procedures are entirely administrative in nature and are not considered legal proceedings. The CSSO
may remove or dismiss an advisor who becomes disruptive or who does not abide by the restrictions on their
participation.
• The student is responsible for presenting her/his own case and, therefore, advisors are not permitted to
speak or to participate directly in any hearing, except when the student is under the age of eighteen (18) or
incapacitated.
• Student shall have the right to identify documents, witnesses and other material he/she would like the
CSSO or designee to review before making a final decision.
• Any hearing held shall be conducted in private unless all parties agree otherwise.
• A record of the hearing should be maintained by the CSSO or designee.
• Audio and/or Video Recording – TSJC, at its discretion, may audio or video record any meeting throughout
the process. Should a recording exist, the student may request a copy at the end of the process. No other
audio or video recording will be allowed.
• If student has a disability and would like to request an accommodation to assist her/him through the
discipline process, he/she may do so by informing the CSSO or designee. The CSSO or designee will then
work with disability support services to accommodate the request.
• Proceedings under this procedure may be carried out prior to, simultaneously with, or following civil or
criminal proceedings off-campus.
106
• Standard of proof – TSJC will use the preponderance of evidence standard in the disciplinary proceedings,
meaning, TSJC will determine whether it is more likely than not that a conduct code was violated.
• All sanctions imposed by the original decision maker will be in effect during the appeal. A request may be
made to the CSSO or designee for special consideration in exigent circumstances, but the presumptive
stance of the College is that the sanctions will stand. Graduation, study abroad, internships/externships,
clinical placements, extra-curricular activities, etc. do not (in and of themselves) constitute exigent
circumstances, and students may not be able to participate in those activities during their appeal. In cases
where the appeal results in reinstatement to the College or of privileges, all reasonable attempts will be made
to restore the student to their prior status, recognizing that some opportunities lost may be irretrievable in the
short term.
• The procedural rights afforded to students above may be waived by the student.
• All timelines may be extended as agreed upon by both parties.
Retaliatory Acts:
It is a violation of this procedure to engage in retaliatory acts against any employee or student who reports an
incident(s) of Code of Conduct violations or any employee or student who testifies, assists or participates in
the discipline proceeding, investigation or hearing relating to such allegation(s) of Code of Conduct violations.
Revising this Procedure:
TSJC reserves the right to change any provision or requirement of this procedure at any time and the change
shall become effective immediately.
Record of Discipline:
The record of disciplinary actions will remain confidential, separate from your academic record and
maintained by the Chief Student S
ervices Officer. They are not available to unauthorized persons. Exceptions will be made only under the
conditions specified in the Family Education Rights and Privacy Act of 1974, as amended and under
a court order or subpoena. All records of a case will be maintained by the office of the Vice President of
Student Affairs for a minimum of five (5) years after the final resolution of the case at which time they will be
destroyed, unless mitigating circumstances exist as determined by campus administration.
Additional Residence Hall Information – Summer 2016
Laundry
Each residence hall has laundry facilities located in the building. Residents needing change for the
laundry facilities may ask the Bookstore for change during normal business hours. If laundry
equipment is broken or not functioning properly please contact the Housing Office at 719.846.5458.
Cable TV Services
Each room is equipped with a cable TV hookup providing basic service channel selections. If you
have a cable-ready TV there is no extra charge or equipment necessary for these basic services. For
problems with your cable service contact Comcast at 1.800.COMCAST (1.800.266.2278).
Internet Connections in the Residence Halls
In order to use the high-speed Internet connection, residents must have a LEGAL copy of an
operating system (OS) and meet basic security requirements. These requirements include up-to-date
OS patches, antivirus definitions, and antispyware definitions.All Administrative level and user
accounts on personal computer systems must be password protected. You must abide by Housing
and College Network/Internet policy. You are responsible for your computer system regardless of
where it is used or by whom. For problems with your wireless connection, please call or leave a
voice mail with the Technology Services Help Desk at 719.846.5663 Monday through Friday
from 8:00 a.m. to 5:00 p.m.
Other Devices
107
If you have other devices that will not work (e.g. game systems, VoIP phones, TiVo) contact the
Technology Services Help Desk at 719.846.5663.
Technology Access – Special Needs
Do you have difficulty accessing a standard computer or electronic information due to a disability?
Those needing assistance may include students who: experience pain when computing, cannot see
the computer screen, cannot access a standard keyboard or mouse, or have visual, language, or
auditory processing difficulties. Please contact Dan Wilson at 719.846.5567
Furnishings, Bunks, Lofts, and Other Alterations
Students are responsible for the College furnishings provided in their rooms. All rooms are
furnished with an extra-long twin-sized bed, dresser, closet, desk and chair. Residents must provide
their own towels and personal articles. Furnishings designed for use in public areas are not to be
moved into students’ rooms.
Portable air conditioners and evaporative coolers are not allowed in any hall due to electrical
restrictions. Nearly all other forms of movable furniture are permitted within the guidelines
presented in the Residence Life Handbook found on the Residence Life web site.
All furniture pro-vided in your room must remain in the room you are assigned. It is recommended
that you not bring or rent additional furniture.
Failure to follow the Furnishings Policy may result in disciplinary action and charges to
replace/repair damages.
Refrigerators/Microwaves
Students may bring their own refrigerators as long as it meets the following requirements:
The unit specifications are not to exceed the maximum of 4.6 cubic ft.
Cannot exceed 115 volt, 60 cycles AC 100 watt.
The appliance must be electrical and UL approved.
Housing and maintenance personnel have the final authority to approve or deny use of appliances.
The College reserves the right to inspect refrigerators for unsanitary conditions.
DO NOT bring full-sized refrigerators.
Repairs
What Housing Does Not Repair
• Cable Television: For problems with your cable service contact Comcast at 1.800.COMCAST
(1.800.266.2278).
• Refrigerators and Microwaves: Contact the appliance's manufacturer.
• Phones: Contact your phone’s manufacturer
• Personal Items
Maintenance Requests in YOUR living space can be placed by:
• Contacting the housing office at 719.846.5497 during regular business hours. If you leave a
message please include the following:
• NAME
• CALL BACK NUMBER (let us know the best time to reach you)
• RESIDENCE HALL
• ROOM NUMBER
• NATURE OF THE PROBLEM
NOTE: All requests received will be processed in a reasonable amount of time. You should expect
response or feedback within two business days.
Non-Emergency Service and Maintenance Request
(These requests must go through the Housing Office)
• Keys
• Pest control
108
• Furniture changes/requests
Emergency: Emergency is defined as fire, life, and safety issues and Trinidad PoliceDepartment
should be called at 911. Also, the TSJC security should be called at 719.845.6042 and Housing at
719.846.5497
Urgent Service and Maintenance
Contact the person on duty for your residence hall: your RA or the Housing Office. Urgent response
is defined as safety/security issues, heat, alarm malfunctions, and any utility problem that may cause
damage to College facilities. Urgent requests include:
• Loss of hot or cold water
• Loss of heat
• Loss of electricity (room light out is not an emergency)
• Electrical hazard
• Flooding or major leak
• Fire (call 911)
• Gas leaks
• Lock malfunction or breakage
• Any condition that represents a significant imminent threat or potential hazard to the community
• Glass window breakage (this is a potential safety and security hazard)
• Toilets (loss of service in halls)
Alcohol Policy
Alcoholic beverages are NOT permitted in any state building or state property including the
residence halls (Huggins, O’Connor, Johnson and Romero) and surrounding grounds. Any student
or guest possessing or consuming alcohol, possessing empty alcohol containers in the residence
halls or elsewhere on campus will be subject to residence hall disciplinary sanctions which could
lead to suspension from residence halls or total expulsion from campus.
This includes students and guests above and below 21 years of age.
Bias Incidents
Bias incidents are non-criminal activity against a person or property that is motivated, in whole or in
part, by the offender’s bias against perceived or actual race, ethnicity, national origin, religion,
ability, age, gender, gender expression, socioeconomic status or sexual orientation. Bias incidents
are prohibited in the residence halls. Such incidents may result in the immediate removal and
permanent expulsion from the residence halls.
Candles and Open Flames
Due to fire safety standards candles (including unburned or decorative) and any items with an open
flame or exposed heating coils are NOT allowed in residence hall rooms. Incense burning is also
NOT permitted.
Compliance With Officials
Residents and their guests are expected to comply with the verbal or written directions of any
College official or police officer acting in the performance of their duties and in the scope of their
employment.
Damage
• Students are liable for any damage that they cause to College property and may need to pay
replacement or restoration costs.
• Students representing an informal or organized group that sponsors a social event are liable for any
damage to College property that occurs in connection with that event.
• Students are expected to assist staff by accepting responsibility for damage to College property,
and to identify those students who are responsible for such damage.
• Extensive or recurring damage to community areas may result in charges being incurred by the
community and possible disciplinary action.
109
Drug Policy
Use, possession, manufacturing, or distribution of illegal drugs including but not limited to
marijuana, narcotics, methamphetamines, cocaine, opiates, LSD, mushrooms, heroin, designer drugs
such as Ecstasy and GHB, or other controlled substances is prohibited.
Use or possession of prescription drugs or over the counter products other than for the person
prescribed, inappropriate use of, or for use other than the prescribed purpose is prohibited.
Possession or use of drug paraphernalia including but not limited to equipment, products, and
materials used to cultivate, manufacture, distribute, or use illegal drugs is also prohibited.
MEDICAL MARIJUANA POLICY
Trinidad State Junior College policy since November 2010 is: “Although possession and use of
marijuana for certain medical conditions consistent with the requirements of the Colorado
Constitution is no longer a crime in the State of Colorado, the possession and use of marijuana
remains illegal under federal law. Consistent with federal law, including the Controlled Substances
Act and the Drug-Free Schools and Communities Act, the use and/or possession of marijuana
continue to be prohibited while enrolled as a TSJC student is on campus, including while in campus
housing.” In addition, students must adhere to the regulations specified in program handbooks and
may be subject to disciplinary action for failure to comply.
Emergency Procedures
• For emergencies call 911.
• TSJC Security will contact the most appropriate emergency service whether it is fire, victim
assistance, emergency counseling, ambulance, paramedic, or police.
• Tell the dispatcher what the situation is and stay on the phone until all questions have been
answered and the dispatcher tells you to hang up.
• Residence hall staff should then be called immediately and informed of the emergency.
Entering a Student Room
If practicable, the College will not enter a student’s room unless accompanied by the student, their
authorized representative, or a second authorized College representative. However, the College
reserves the right to enter student rooms for the purpose of inspecting the premises for adherence to
fire- and life-safety guidelines, routine cleanliness inspections, housekeeping, maintenance,
necessary repair, to serve a warrant for the arrest of a resident/guest of the room, or with a search
warrant for the room itself, to aid in an arrest which began outside the room, or when an authorized
agent has reasonable suspicion of a violation of contract that includes: a) an occupant of the room
may be physically harmed or endangered; b) damage is being done to College property; or c)
College policy is not being adhered to as stated in the College General Catalog, Student Handbook
and the Residence Hall Handbook.
Explosives
Explosives of any nature, including flammable liquids, fireworks, and ammunition, are not
permitted in the residence halls. This includes lighter fluid and Zippo®-type lighters.
Hate Crimes
Hate crimes are prosecutable offenses committed against a person or property with the intent to
intimidate or harass another person because of perceived or actual race, ethnicity, national origin,
religion, ability, age, gender, gender expression, socioeconomic status or sexual orientation. Hate
crimes are prohibited in the residence halls.
Passive Involvement
Being a member of a community means understanding and adhering to community standards and
policies. It also means taking an active role in the development and well-being of that community.
One community role is to ensure that community standards are upheld. As a community member,
you are responsible for your behavior, the choices that you make, and the behavior of your guests. It
110
is our hope that you will choose to abide by all College and housing policies as well as community
standards. If you are ever in the presence of a policy violation, you have some choices:
• You may attempt to stop the violation,
• You may contact residence hall staff, or
• You may remove yourself from the situation.
If you choose to remain at the scene of a policy violation, you may be included on the incident
report and may be held accountable for a policy violation.
Pets
• Residents are not permitted to have fish in their rooms. Residents having pets in their rooms may
face disciplinary action and be charged for damages and/or cleaning. Pets include but are not limited
to: dogs, cats, snakes, turtles, salamanders, newts, fish, frogs, rodents, etc.
• See the section on “Service Animals” for information regarding service animals.
Pranks and Practical Jokes
Individual or group pranks and practical jokes that may lead to any of the following are not
permitted:
• Actual or perceived harassment
• Accident
• Injury
• Damage to College property
• Damage to personal property
• Damage that requires abnormal and/or unnecessary cleaning of residence hall
buildings and facilities.
Residents in violation of this policy may receive disciplinary action and monetary fines. If no one
comes forward, all residents of the residence hall may be fined to cover the expense of
repairing/replacing damaged items.
Public Areas
• All furniture located in public areas must remain in those locations. Removal of furniture from
designated areas will be considered theft.
• When removing your personal room trash and recycling, please use the receptacles located outside
of your residence hall. Please do not place personal trash or recycling in stairwells, bathrooms, or
public trash cans within your hall.
• Study rooms are designed for academic use only.
• No illegal activities are permitted in the public areas.
• Under no circumstances are students to sit on windowsills, climb out of windows, or be on exterior
window ledges. Students also are not permitted to climb on residence hall buildings, ledges, or
roofs.
• Students are prohibited from throwing any object out of room windows, or the window of any
public area or lounge in the building.
• Students are also prohibited from removing window screens, whether in a residence hall room or
public area.
• Students may not use their residence hall room, its address or phone number for commercial or
business purposes.
• Students may post a message board on the exterior of their room door. The exterior of the door
may not have any wording or material that is obscene or pornographic.
Residence Hall Furniture
The furniture provided for use in the lobbies and in the public space of the Residence Halls is for all
of the residence and guests. Relocating furniture to individual rooms is considered theft of public
property and is not tolerated. Should this furniture be found in a student room each resident of
111
that room will be fined $25 for each item of furniture found in the room for each day it remains in
the student room including the day it was found. Should the furniture not be located in a student
room, the floor it was supposed to be located on will be fined the cost of replacement of the
furniture until the furniture is located.
Quiet Hours
Students have the right to sleep and study in the residence hall environment. It is very important that
residents take the responsibility to follow the Quiet Hours and Courtesy Hours Policies in the residence
halls and those areas directly surrounding the residence halls.
This means that even on weekends, residents have the right to sleep and study and may ask other
students to keep the noise level down if they are being bothered by excessive noise.
A Quiet Hours violation is defined as any noise, from any source, being audible one door away from the
source.
For the those areas surrounding the residence halls Courtesy Hours are in effect 24 hours a day, 7 days a
week. This means that during the day, and even on weekends, residents have the right to sleep and study
and may ask other students to keep the noise level down if they are being bothered by excessive noise. A
Courtesy Hours violation is defined as any sustained noise, from any source, being audible over 50 feet
from the source of the noise.
Quiet Hours begin Sunday through Thursday at 10 p.m. and end at 8 a.m. Friday and Saturday night
Quiet Hours begin at midnight and end at 8 a.m.
Sales and Solicitation Policy
Door-to-door solicitation, distributing, and advertising is prohibited. A student or organization must
secure authorization to sell on campus. In the case of residence hall authorization, it must be
obtained through the Housing Office, 719.846.5458. On-campus sales by students or authorized
student organizations are limited to designated areas, as approved by College Administration.
Service Animals
Students with specific disabilities may have service animals if the need is documented. Students are
responsible for behavior of the animals in regard to other standard policies of the residence halls and
city codes. Exceptions to these policies may be requested and granted by the Housing Office. The
training of service animals is limited to public areas in the hall. Animals in training must be with
their trainer at all times and are not allowed to reside in the facilities.
Smoking
The residence halls at Trinidad State Junior College are smoke-free buildings. Residents, guests,
and staff members may NOT smoke in any residence hall. Individuals who choose to smoke will
need to exit the residence halls and only smoke in the outside location that has been designated as a
smoking area. Smoking is prohibited in all College buildings and within twenty feet of the building.
Stalking
Stalking is a crime in the state of Colorado and is generally defined as willful and
repeated following and harassment combined with a credible threat intended to cause the victim to
be in fear for their safety. Stalking behaviors can affect the mental and physical health of the victim.
112
Incidents of this kind should be reported immediately to the police and then notify the Housing
Office. Don’t hesitate to ask for help.
Theft, Stolen Property
Theft or unauthorized use of College or others’ personal property is prohibited. The Trinidad Police
Department may be informed of cases involving stolen property. In the event a theft occurs, the
student is responsible for reporting and filing a report with the Trinidad Police Department. The
student should also notify the Housing Office. The police may choose to refer the student to the
student conduct system or file charges.
Threats
Threats of any kind – real, false, implied, or perceived – against a person or property will not be
tolerated. Housing staff are expected to always be cautious and respond to any knowledge of threat
or injury to residents. Students who makes threats to others or to themselves can be assured that
staff and possibly the Trinidad Police Department will respond.
Safety Equipment
The residence halls have a zero tolerance policy on tampering with College safety
equipment. Students caught altering their room or hall safety equipment may be held financially
responsible for replacement and/or judicial action may be taken.
Videotaping and Camera Use
Consistent with state law and College policy, persons living in or visiting the College residence
halls have rights as well as responsibilities regarding the privacy of others. No person may
videotape, audio record, or take photographs of any person in a private location without that
person’s explicit knowledge and consent. Private locations include, but are not limited to, residence
hall rooms, bathrooms, and lounges.
Weapons
Students may not bring firearms or other weapons (hunting knives, archery, fencing, paintball guns,
pellet guns, taser guns, air soft guns, martial arts equipment, slingshot, any item that is a reasonable
facsimile, etc.) into the residence halls. Firearms, weapons, or ex-plosives of any nature (including
fireworks and flammable liquids) are strictly prohibited in the residence halls. If firearms are
brought to campus, storage accommodations must be made through the Gunsmithing Department
719.846.5578. Exotic weapons (such as swords, nunchucks, etc.) are also not permitted on College
property.
Firearm Allowances
To present an authorized public demonstration or exhibition pursuant to instruction in conjunction
with an organized school or class or to participate in an authorized extra-curricular activity or
athletic team. Students must obtain prior written approval from the proper authorities.
Specified repair/modification or to be used at the TSJC Prator Gun Range.
By authorized law enforcement officers while in performance of their duties.
For purposes of storing firearms in a college vault and instructional purposes in the Gunsmithing or
CLETA programs. Gun safes are NOT ALLOWED to be kept in residence hall rooms.
To present an authorized public demonstration or exhibition pursuant to instruction in conjunction
with an organized school or class or to participate in an authorized extra-curricular activity or
athletic team. Students must obtain prior written approval from the proper authorities.
Specified repair/modification or to be used at the TSJC Prator Gun Range.
By authorized law enforcement officers while in performance of their duties.
For purposes of storing firearms in a college vault and instructional purposes in the Gunsmithing or
CLETA programs. Gun safes are NOT ALLOWED to be kept in residence hall rooms.
113
Firearm Authorized Use
The College’s Gunsmithing Department shall develop procedures and regulations pertaining to the
use of firearms as part of the only recognized programs of instruction that re-quire access to a
firearm as an integral part of the instructional program.
Gunsmith students residing in the residence halls are allowed to keep NON-OPERABLE firearms in
their room. Firearm ammunition is NOT permitted to be stored in the residence halls. The College
reserves the right to inspect such firearms at any time for any reason. Failure to comply with this
policy may result in housing, College, and legal disciplinary action, including but not limited to
immediate removal from the residence halls, expulsion from the College, and a legal citation.
Trinidad State Junior College is committed to providing a safe living environment for all
residents. Personal security in and around campus residence halls has been approached
proactively, and personal security in a student’s residential living space has the highest
priority. Residents should feel most safe and secure in their rooms. To travel from outside a
residence hall to a residential room, residents will have to successfully pass through at least
one (1) control point. Key access allows residents to enter their hall and floor. Guests must
always be escorted when inside a residence hall Please call 719.846.5458 or 719.846.5497 with
any questions.
The College provides residence hall supervision through Campus Security, Trinidad Police
Department, and Resident Assistants. Entry/exit areas, parking lots, and the exterior buildings
may be monitored through camera surveillance.
Safety and Security
The Housing Office has taken several steps to improve the safety of its residents:
1. Student doors have heavy duty, high security locksets on solid core doors.
2. Door viewers on student doors.
3. Twenty-four hour lock up on all residence hall access areas key access only.
4. Smoke and fire detection systems in all halls.
5. Crash bars on all exit doors.
7. Security latches on the windows.
8. All exterior doors in the residence hall system are monitored for proper position and alarmed; all
external fire tower doors are designated “Emergency Exit Only” and will activate an alarm if
opened.
9. TSJC Security and Trinidad Police Department patrol the residence halls on a frequent schedule.
Reporting Disabilities
It is suggested that residents with disabilities share that information with their Resident Assistants
(RAs) at the beginning of the semester. This information assists emergency personnel in providing
appropriate help in case of evacuations and emergencies. Re-porting is not a guarantee of safety
during an evacuation. Reporting is strictly voluntary.
Reporting Hazards
Report non-emergency hazards to the hall office. The information will be passed to the appropriate
department for correction. In emergency situations, dial 911. Always re-main on the line until the
emergency dispatcher has adequate information and tells you that it is okay to hang up (if your
safety is threatened at the location of the telephone you are using, evacuate the area).
Window Screens
114
Window screens are there for your safety and protection. Removal of the window screen is a safety
violation and a charge will be assessed for its replacement. Disciplinary action may be taken. Report
any lost, damaged, or stolen screens immediately to the Housing Office.
Security
Security procedures such as desk services, security patrols, evening lock up, and
restricted-access plans are regularly reviewed and open to changes and improvements. Students are
expected to observe lock-up procedures and cooperate with programs de-signed to maintain the
security of residents. Propping of entrance doors is prohibited.
Bicycles/Motorcycles
To assist with safe building evacuation, bicycles/motorcycles are not allowed in hall-ways or
stairwells, nor are they to be chained to stairwells, railings, or trees at or near building exit routes.
Theft
Unfortunately, theft can be a problem in College residence halls. For this reason, you are
encouraged to be sure your personal possessions are covered by some form of insurance either as a
part of your parents’ homeowners’ policy or by a separate renter’s insurance policy. We also
recommend inventorying your valuable possessions with the Housing Office. For this reason, it
would be helpful to engrave an identification number on your valuable possessions and have a list of
items including description, value, model number, and serial number prepared in advance. It is
important for you to protect your possessions and those of your fellow students. Keep your room
door locked whenever you are out of your room, sleeping, or napping. When you see strangers who
do not appear to belong on your floor, find out who they are and what they’re doing. Remember, “if
you like your stuff, someone else will, too!”
115

2016 Summer NRA Program - Trinidad State Junior College

Transcription

Similar documents

2015 Winners

AGI - Fantastic Fall

Rangemaster Newsletter

Fort Hancock, June 2013 - Army Ground Forces Association

Gun Safe-Curio Cabinet - Creative Building Resources

Naugatuck Valley Community College Waterbury, Connecticut

Blood Money II: How Gun Industry Dollars Fund the NRA

hK416 cQB - Pyramyd Air

October 2015

If for some reason, you no longer wish to receive

Beretta Mx4 brochure