AGI - Fantastic Fall

AGI
We've packed this mailer with gunsmithing projects! Don’t waste your life being bored in front of the TV watching the
latest set of dysfunctional misfits on some reality show. Turn that time and energy into creating your own Masterpiece,
something you can be proud of, something your friends will admire. Get comfortable in your shop and experience the joy
of accomplishing these projects. You’ll feel good about the results and you will have created more self-reliance and
personal freedom in your life.
A gorgeous custom Mauser built by AGI student Jim Pimentel! You
can check out his story and the course he took on page 2.
Some of the gunsmithing projects you can work on
are: accurizing your Remington 700 or other
model bolt gun for varmint hunting, building or
customizing a Custom 1911 pistol for IPSC
competition or concealed carry, refinishing your
rifle or shotgun stocks, tightening up the triggers on all your guns to improve
your accuracy, converting your Remington 870 for home defense or tactical use, customizing your
Glock, or building your own AR-15 or AKS rifle - the way YOU WANT IT!
ALL this is within your reach with AGI step-by-step courses. In fact, we
have such a large variety of instructional courses
in so many areas of gunsmithing
that we could keep you
busy for the next few years!
Here's some incentive for
you . . . check out that
beautiful custom Mauser
shown above that AGI student Jim Pimentel built
on his very first try! It is
absolutely gorgeous and you
can do it too! Go to page two
for more details about
building a custom Mauser with
your own hands that you can
pass down to your grandkids!
Get started today!
1-800-797-0867
Your guns will be happy you did
and you will be too!
1
Build your own custom rifles with
Build a custom Mauser
worthy of becoming a
family heirloom!
Experience the satisfaction of building a
heirloom quality rifle that can be handed
down to your grandchildren.
You can do it with this
step-by-step course.
AGI Master Gunsmith Gene Shuey will show you each step, from removing old parts, to installing
and headspacing a new barrel. In this epic production you will see a solid old military 98 transformed into a classic hunting rifle. We start with two identical guns and then go through every
single conversion step in detail. Actions, triggers, barrels, stocks, mounts, slings, sights and custom
accessories are covered in extensive detail. Over seven (7) hours of detailed information!
Over two years in development and production! First we provide you with a thorough discussion
and identification of Mauser Actions. Then we teach you each of the following steps:
• Selecting Actions
• Removing The Old Hardware & Barrel
From The Action Using A Barrel Vise
• Selecting Barrels, Considerations
• Installing, Reaming And
Headspacing A Barrel
• Muzzle Brake Installation
Welding & fitting a custom bolt handle
Soldering on new sights • Custom Floor Plate Installation
• Bolt Handle Modifications
• Installing Sights And Soldering
• Selecting A Stock
• Inletting And Contouring The Stock
• Basic Checkering Concepts
• Stock Refinishing Concepts
Cartridge trap installation • And Much, Much More . . .
Inletting the stock
DVD#3064 Non-member price: $79.95 plus s/h GCA Silver Price: $63.96
AGI student builds an absolutely beautiful custom Mauser hunting rifle with
the help of AGI instructional videos - He says you can too!
“ . . . I decided that I would attempt to build my own custom rifle. I ordered the
“Building the Custom Mauser.” I purchased a Persian 98/29 Mauser rifle and began
work. Mr. Shuey is a disciplined instructor, not given to over statement. For the
beginner, these videos are so helpful as they walk one through the entire process of
building a custom rifle. Then I purchased the Rust /Nitre Bluing. I have just
completed all of the metal work (bottom metal, action, bolt and barrel) and I gotta tell
you, it is beautiful! I could never have afforded to purchase a custom rifle of this
quality. Yet, with these tapes, I have been able to produce beautiful work. This is not
a testimony to my own efforts. Rather, this is praise for the ability of these videos to
provide instruction in such a way, that a beginner like me can turn out decent work.
In the hands of a patient and diligent person, these videos bring the possibility of the
custom rifle into the reach of people like me. For that I wish to thank you and your
organization for providing me with this service. I got more than I bargained for from
your videos! Sincerely yours, Pastor Jim Pimentel
2
1-800-797-0867
AGI
2
An AGI Armorer’s Course on
the Mauser ’98 family of rifles
(the ’91 - ’98) which features
an expanded history section, as
well as vintage collectables and
accessories provided by “Mr.
Military” himself, John Bush!
We cover the design and
function using an AGI cutaway
made just for this course and
then we take you through the
complete disassembly and
reassembly showing differences between models along
the way. Your instructor,
Master Gunsmith Ken Brooks
has been building custom,
“sporterized,” Mausers for
years and loves the history of
the Mauser line, so he was the
perfect choice as instructor for
this course. Ken uses samples
of nearly every model from the
’91 to the ’98 and has a couple
of models that are pretty rare
and collectable indeed! We
finish up by showcasing some
original German collectables
including rare paper ammo
cases, ammo, training cards
and manuals. We also have .22
caliber training rifles and
actions made by France,
Germany and Belgium. This
course is longer than the usual
2 hours in length because it has
so much material in it!
Consider yourself warned, this
course is HOT! 167 min.
DVD#1434 $39.95 plus s/h
GCA Silver Price: $31.96
www.agiFall2015.com
these 4 courses!
3
4
Make your
firearms look
Rebarrel Your like new by
Military Bolt refinishing
the stocks!
Action Rifles
This 5 hour course is designed
to teach you how to super tune
all the popular military bolt
actions including: Mausers,
Enfields, Springfields, and
Japanese Arisakas.
AGI’s Ken Brooks tells you
which models are safe to build-up and which ones aren’t,
including which work best with magnum cartridges. This course
focuses on tuning, strengthening, and accurizing the action for
both reliability and function. Ken not only shows you HOW to
perform each procedure, he also explains WHEN and WHY to do
them. He shows you how to: weld up the firing pin hole, reshape
the firing pin, machine the bolt face and open it for magnums,
super-tune the extractor and make it “snap-over” for reliability,
lap the lugs, extend the mag box for longer cartridges, install
recoil shoulders in the magazine box, open the rails to feed
magnum cartridges, fit the magazine for reliable feeding, and
modify the front guard for bedding. Learn to flare the cocking
piece runway, fit the bolt stop and ejector, do a trigger job, rebarrel and headspace. Dozens of custom modifications are shown;
some for reliability, others for accuracy, and many for personal
taste. We show you how to perform procedures without expensive
tooling and which tools are a “must have.” You CAN build an
accurate, reliable, totally awesome, customized, military boltaction rifle! DVD#3284 Non-member price: $79.95 plus s/h
GCA Silver Price: $63.96
Duplicate the finish of the top
gun makers by using AGI's
step-by-step process. Master
Gunsmith Gene Shuey teaches
you how to remove dents, fix
cracks, strip the old finish,
preserve checkering and how to apply a new custom oil finish.
The end result will be a beautiful
finished stock that you can be
proud of. Guaranteed!
This exclusive
AGI video covers the process in
detail, showing you how to strip off the old finish, fill or fix dents
and scratches, how to sand and fill the grain, special techniques
for getting the proper color stain and the proper way to apply and
treat the finish. All of the simple tools and materials that you will
need are readily available and everything is explained in detail.
If you properly follow the AGI method your rifle or shotgun will
look like it was refinished by an expert. 120 min.
DVD#SRVDVD Non-member price: $49.95 plus s/h
GCA Silver Price: $39.96
I'm an AGI student and a Silver GCA member. I was asked by a friend
if I could fix the stock of his 870 shotgun. I read about the AGI course
on stock refinishing with Gene Shuey. I sent for the course, followed
the detailed step-by-step instructions and the stock looked like new. No,
it looked like a custom job of woodworking. I am
so happy with this finished stock. The professional instruction is top notch. So, from Medford,
Oregon this is R.G. Waterbury thanking all of
you at AGI for this amazing gift of knowledge.
3
BUY ALL 4 COURSES
AND $AVE!!!!
Non-member regular price: $249.80 plus s/h
Fall Sale Price: $199.84
GCA Silver Price: $159.87
GCA Members $AVE $89.93
Mention Bundle #20 when ordering.
(Includes courses #3064, #1434, #3284, #SRVDVD)
PLUS FREE SHIPPING on orders over $100!
Do you own any of these guns?
Then you need the Video Technical Manual for it!
AGI Armorer's Courses on DVD
video teach you design and
function and 'how-to' completely
disassemble, maintain, repair,
and reassemble your guns, fast
and easily with total confidence!
We believe you can't fix it unless you truly understand HOW the firearm is
intended to work. These really are owners' and technical manuals on DVD.
What is Covered in an Armorer’s Course? We start with a brief history of each
particular firearm and in most cases use an exclusive factory cutaway to explain in detail
Course 1014,
the design of the feeding and locking mechanisms, the trigger system, proper ejection, and every
1034, & 1064
other function of that specific model of firearm with views of the intricate internal workings not normally visishown here.
ble. After you have a complete understanding of the design and function we show, step-by-step, complete disassembly
and reassembly, then teach you basic troubleshooting and repairs at an Armorer's level. And AGI keeps you out of trouble by
telling you what parts you should never remove! AND . . . all AGI Armorer's Course DVDs include a FREE printable schematic!
Non-member price: $39.95 each plus s/h. GCA Silver Price: $31.96
Order $100 or more and get FREE SHIPPING!
4
1-800-797-0867
AGI
www.agiFall2015.com
Buy two get one free offer cannot be combined with any other promotional offers or discounts. Limit 3 free with 6 purchased. Offer expires 12/15/15.
AGI
www.agiFall2015.com
1-800-797-0867
Disassembly/Reassembly Manuals on DVD for your firearms!
THIS IS 'MUST HAVE' SUPPORT INFORMATION FOR ANYONE WHO OWNS ONE OF THESE FIREARMS!
These DVDs clearly demonstrate the COMPLETE process of disassembly and reassembly step-by-step using close
up views to provide clear instruction. Each DVD covers one specific model or family of firearms and is indexed to
help the user quickly find the information they are looking for.
Order $100 or more and get
Non-member price: $19.97 each plus s/h. GCA Silver Price: $15.96
E SHIPPING!
FRE
5
Become a machinist
in a matter of hours GUARANTEED!
Is it really possible?
The American Gunsmithing
Institute has created the first ever
complete home study course with
step-by-step instruction in all aspects of welding.
Can you learn how to operate a lathe, mill,
and general machine shop equipment by
watching our courses? Yes! In fact, just hours after watching this
course you’ll be turning out high quality work. Instructor Darrell
Holland breaks down the information into its simplest components.
Each technique he teaches prepares you for the next skill level.
Gas Welding (Oxy-acetylene), Stick (flux coated Arc Welding),
MIG (wire feed), TIG (Tungsten Inert Gas), Gas Cutting,
Plasma Cutting, Welding Small Parts, Welding
Symbols, Welding Projects, Shop Set Up, Safety
Be an expert welder in a matter of hours! Many times
when you are gunsmithing you will encounter a firearm that has
a worn or broken part which is expensive, hard to get, or even no
longer available. Knowing how to repair the existing part by
welding is often your best solution and can be the difference
between being a successful gunsmith or not.
The secret to ALL types of welding is
knowing how to control the molten puddle. We teach this at the very beginning
of our welding course and you WILL
22+ Hours!
master this skill! Welding is a skill set
that you need to learn to be a well rounded gunsmith, along with
learning to understand the design, function and repair of firearms
and basic machining skills. This course will take an absolute
novice and have them making professional looking welds in a
matter of minutes. Even experienced welders will learn new
tricks of the trade. Our Complete Welding Course is the most
comprehensive, video based, welding course ever produced.
Each part is presented in an easy-to-understand format, step-bystep, using close-ups that make a 1/2
See before you invest!
inch molten puddle fill your television
screen. #WELDINGCOURSE
Non-member price: $1,297 plus s/h
GCA Silver Price: $1037.60
"I have an extensive background in welding,
own my own business and have fabricated
many items throughout the last 25 years. I
thought I knew a lot about welding but I See clips from the course online today at
www.agivideos.com/weld
quickly realized I didn’t. What an excellent
course! I would highly recommend this course to all those who are
serious about learning proper welding procedures. Keep up the good
work." Ronald Stephenson, Phillipsburg, MT
"The Lathe Course was superb, and the Milling Course is even
better, I learned more tricks and insights from these courses than
35 years of hands-on has taught me. Just his tips for tramming in
the head quickly and easily were worth the cost of the course to
me. Darrell is not only a master machinist and gunsmith, but a
natural instructor as well. Thanks for another great course!"
Steve Bird Sr., Failure Analysis Engineer, San Jose, CA
Bonus DVDs &
Materials!!!
Two more
instructors will
show you how to
set up and operate
an automotivecylinder boring
PROFESSIONAL COURSE CA School Code #2800501
machine and an
automotive brake lathe. Armed with this information you could
start doing contract work for a local garage! AND in addition to
the 30 plus hours of video in the course itself, you will receive the
2,543 page Machinery’s Handbook (which is the Machinist's
bible) the matching Machinery’s Handbook Guide, an AGI
machinist apron, a pocket conversion and drill chart, practice tool
bit, thread alignment "fish-tail" gauge, written test, blueprints and
test materials. #MSCOURSEDVD Non-member price: $1,397
GCA Silver Price: $1117.60 plus s/h
OVER 30 HOURS ON DVD!
ONLINE WELDING AND MACHINING COURSE AVAILABLE FROM AGI!
You can attend the welding and machine courses online for a reduced price of only $497 each! Limited to
first 100 students so ACT NOW! Call our student advisors for more information and to enroll today at 1-800-797-0867.
6
Monthly access is $29.95 per month for continued access - call for details. Certified courses can only be ordered by phone. School Code #2800501
Learn ‘how-to’ make hand loaded ammunition tailored specifically
for YOUR needs. This course is far more in depth than any other
reloading course on the market. Renowned cartridge designer,
gunsmith, and AGI Instructor Fred Zeglin addresses reloading from
its most basic components so any novice reloader can jump right in
confidently after watching the course. He goes much further and
introduces you to tools that increase the speed and quality of the
reloading process. Popular tools offered by numerous manufacturers of reloading gear are demonstrated and explained. He also
covers casting bullet techniques and advanced precision reloading
for long range shooting.
Most people learn reloading strictly from
Regular Retail: $497 plus s/h
a mechanical 'monkey see, monkey do' view point. In other words, nobody
ever completely explains to them WHY operations are performed a certain way or WHAT value they have. In
this course Fred shows you, from a gunsmith’s perspective, what is happening to the brass when fired and
when it goes through the reloading process. This information will make you a well informed reloader and if
you’re a gunsmith, will help aid in diagnosing problems with your clients reloads and guns.
Accuracy is always the name of the game for any shooter. Fred talks about what makes a safe, accurate reload
and shares simple tricks that will save you hours of trial and error at the reloading bench and range.
Obviously, this translates into saving money on components as well.
IN THIS COURSE YOU WILL LEARN:
• History of reloading
• Reloading safety
• Choosing Components
• Introduction to Reloading Tools
• What is really happening to the brass case
• How to make a load plan for safe, accurate loads
• Introduction to a wide range of reloading resources
• Use of the Lee loader
• Portable Reloading tools
• Basic Case preparation
• Case trimming – Advanced case preparation
• Case lubrication
• Step-by-Step reloading of rifle cases - single stage press
• Step-by-Step reloading of pistol cases on a single stage press
• To crimp or not to crimp - dies and bullets
• Use of multi-stage presses
• Priming tools and correct seating of primers
• Manual and Electronic powder meters
• Powder Scales
• Introduction to Progressive Reloading
• Advanced reloading tools
SAVE
$200!
1-800-797-0867
AGI
•
•
•
•
•
•
•
Introduction to bullet casting
Satisfaction
GUARANTEE
Alloying and Casting Lead Ingots
ON EVERY
Hardness Testing cast bullets
DVD
Sizing and lubing cast bullets
Step-by-step bullet casting – single/multi cavity molds
Additional resources and suppliers
Advanced reloading techniques by Darrell Holland
1 Year
In this course Fred does something that only AGI instructors are
able to do - put the gunsmith’s understanding of the subject into
the course. Any reloader whether novice, intermediate, or
experienced will benefit from the clear explanations of the "How's
and Why’s" of reloading. The concepts of internal and external
ballistics are dealt with in a way to aid the reloader in making smart
choices; both in purchasing tools and in producing safe, quality
ammunition with them.
Item#CERTRELOAD This is an AGI certified course with testing
and certification. Non-member price: $497 plus s/h
GCA Silver Price: $397.60 Pre-sale Special Price: $297!
www.agiFall2015.com
7
Be a Certified Firearms Appraiser
Have people bring you piles of guns and
PAY YOU $$$ for your expert opinion!
Millions of firearms are sold, traded, or inherited every year and many of these guns
must be formally appraised for estate, resale, and tax purposes. This provides you
with a little known opportunity. You can get paid for providing your “expert opinion
of value” when you become a Certified Firearm Appraiser™ (CFA). Here are just a
few of the many opportunities:
• The IRS requires that firearms that are a significant part of an estate be
appraised for tax purposes. The same goes for collections of guns being
donated to a museum, foundation, or non-profit as a tax deduction.
• Individuals that need money for retirement or need to raise cash have to know what their guns are worth so
they can get a fair price. In addition, surviving relatives will often want to sell a deceased person’s firearms, but have no
idea of their value.
• In the case of bankruptcies, firearms are considered part of an
individual’s net worth, a certain amount of which, if properly documented,
they get to keep.
You will be able to help these individuals by providing your honest educated opinion,
and getting paid to do it. But, you must have the proper training and certification to
be able to provide an expert opinion and keep yourself legal. We can help you achieve that
expertise FAST!
AGI President Gene Kelly with Greg Martin
of Greg Martin Auctions
AGI has developed this special course which will enable you
to quickly become a Certified Firearm Appraiser™ using
knowledge provided from a panel of experts with well over
400 years of combined experience in collecting, appraising
and selling firearms. You will instantly benefit from all of their
experience, saving you years of trial, error and frustration. The
business lessons they share during these interviews are alone
worth the entire investment in this course. This complete
course even covers how to market your services, so that
estates, foundations and attorneys can find and hire you.
Just the certification alone puts you in a different class. Think about all the additional
business that could come from completing this course! If you offer gunsmithing services
many of these guns may need some restoration, customizing or tuning. You will also get
the opportunity to purchase many of the guns
people bring to you for your own collection or to
resell. Course includes over 17 hours of instruction
on DVDs and audio CDs, a training manual,
1 Year
resource lists, reference books,
Satisfaction
GUARANTEE
appraising forms, testing, and certification.
ON EVERY
Everything you need to get started now.
DVD
Complete the course and you will receive a
Certified Firearms Appraiser patch and a personalized
FREE BOOKS INCLUDED! certificate upon passing test.
#FAPCOURSE Non-member price: $1,247 plus s/h GCA Silver Price: $1037.60
8
1-800-797-0867
AGI
In this course
you will learn from
these respected experts:
Jim Supica
Director, National Firearms
Museum, NRA
Steve Fjestad
Author
"Blue Book of Gun Values”
Greg Martin
Greg Martin Auctions
James D. Julia
James D. Julia Auctioneers
Carey Creech
Advanced Collector
Gene Shuey
Master Gunsmith
Hank Bauer
Bauer Auction Services
Clark Ehlers
Rock Island Auction Company
Marty Higgenbotham
Higgenbotham Auctioneers
Jim Hinton
Sohn Associates, Ltd.
Rick Jennings
The Gun Guy
Brad Simpson
Simpson, Ltd.
Jeff Taverner
Gun Slingers Auctions,
Gun Slingers Gun Shop
Larry Wells
Old Barn Auction
www.agiFall2015.com
Take your Gunsmithing hobby to
the NEXT level with AGI's
Practical Gunsmithing Course
This course teaches you the insider secrets of master gunsmiths and quickly teaches you the shortcuts, tips and
tricks used by the pros! If you are not ready yet to invest in the complete AGI Professional Gunsmithing Course
but want to continue to build your gunsmithing skills and be able to do dozens of different repairs, then the
PRACTICAL Gunsmithing Course is the perfect “next step” for you!
Discover the secrets of repairing, modifying and
customizing your firearms quickly and easily!
9 hours of instruction from Master Gunsmith
Robert H. Dunlap which includes:
• How to set up your home workshop . . .
everything from the depth and height of your
workbench to the “must have” hand and
power tools that will save you time and
money getting started.
• How to custom hand grind your own
gunsmithing screwdrivers
• Two simple tricks for removing broken screws
out of metal or wood
• Cold-bluing methods
• Tricks on how to properly mount a scope . . .
and the “Dollar Bill Test” to use once you’ve
got the scope on
• Proper barrel cleaning to avoid damage
• How to re-tip a broken firing pin
• What NEVER to do when polishing a
chamber
• A simple method to quickly repair loose
handgun grips
• How to replace or install a recoil pad on your
rifle or shotgun
• How to repair a broken stock . . . using the tips
in this lesson just once could save you
hundreds of dollars and pay for the entire
course!
• Various types of firearm locking systems:
rifles, pistols and shotguns
• Proper nomenclature and parts identification
of single action revolver, double action
revolver, shotgun and long gun; learn to talk
"the talk" of a real Gunsmith
• How to identify a striker or hammer fired gun
and why the difference is important
• How to determine the proper “length of pull”
for your firearms
• The differences between American and
European style stocks
• How to tell if you’re stock is “cast-off, cast-on
or neutral” . . . and how this effects recoil
• Why your sight picture may change
depending on your stock’s pitch
• Barrel types, styles, and manufacturing
• Introduction to ballistics and how cartridges
are designed
• A complete discussion of sights and scopes
• And much more we don’t have room to list!!!
Tool recommendations
Efficient shop set up
Fitting Magazines
Bedding Techniques
Install Bead Sights
Grinding Screwdrivers
Chamber Casting
Swaging a Bore
Plus . . . you get The Complete Hobby
Gunsmithing Reference Book!
This book is crammed full with reference
information including a DVD index,
troubleshooting tips, shop techniques, handy
gunsmith tool blueprints as well as heat treating,
ammunition and decimal charts. A must have!
This book includes:
• Master index for the DVDs
• A 16-page “Troubleshooting Flow Chart”
Identify the malfunction then simply follow
across the chart to learn the probable cause
and appropriate corrective action.
THIS IS PURE GOLD!
• The exact blueprints for over 13 different
custom gunsmithing tools that YOU can make
• Metric and English ammunition designations
and sizes chart
• Full page of decimal equivalents - a handy
reference for drill and tap sizes.
• Heat-treating chart for hardening metals.
PLUS More!!!
Receive a certificate of completion
to display in your home or office
upon passing test.
You get everything
shown here!
Non-member price:
$597.00 plus s/h
GCA Silver Price: $477.60
1-800-797-0867
AGI
Receive a personalized certificate!
www.agiFall2015.com
9
"How-to" Customize Remington
The techniques covered in these courses are applicable to most makes and models of bolt action rifles.
1
Master Gunsmith Robert "Bob"
Dunlap shows you all the ins
and outs of the Remington 700
Rifle. Bob teaches you complete disassembly and reassembly, parts identification, proper
cleaning and lubrication. He
give you step-by-step instruction in design, function and
repair, including locking systems, feeding systems, sears,
and triggers. Stocks are also
covered along with easy repairs
for common problems. Bob
will take you inside this rifle
and show you what each part is
supposed to do and how to
maintain and repair it. 120 min.
DVD#1354 $39.95 plus s/h
GCA Silver Price: $31.96
2
Master rifle builder and
renowned varmint
hunter Darrell Holland
explains & demonstrates
the step-by-step process
of making, converting
and installing pillars to create a
rock solid bedding platform
which will increase the
accuracy of your rifle. Every
step is covered in precise
detail. 120 min.
DVD#3114 Non-member
price: $44.95 plus s/h
GCA Silver Price: $35.96
Order $100 or more and
Get FREE SHIPPING!
3
EVERYTHING IS COVERED!
From cartridge and caliber
selection for tactical and varmint
applications, all the way through
the fitting and assembly of a
custom rifle capable of putting all
the bullets through the same hole!
That’s right, Master Rifle Builder
Darrell Holland covers ALL the
options so you can select the style
and features that suit your own
tastes. NOTHING is left out of
the process. Darrell not only
shows you the different features
and styles you can choose from,
he explains the advantages and
disadvantages of each so you don’t make a mistake you’ll regret later.
Darrell actually reveals his exclusive, patented, V-block bedding
system, giving you an inside look at one of the most repeatedly
accurate mounting systems ever invented.
And this course doesn’t end in the shop! You go to the range with
Darrell to put the newly built rifle through its paces. He covers
proper procedures for barrel break-in and sighting-in so you can
preserve the accuracy potential of your new rifle. Darrell then shows
you proper cleaning techniques
and methods in order to maintain
that accuracy!
Cartridge Selection
Whether you want to take out
varmints at 500 yards with uncanny accuracy or you need a tactical
rifle that can perform when it's
needed, this is the course for you.
DVD#3124 Non-member price:
$49.95 plus s/h GCA Silver Price: $39.96 120 min.
BUILD A TACTICAL SHOTGUN!
Convert your Remington 870 for home defense or tactical use.
This two hour course begins with a discussion of accessories and options available, then breaks down
the actual work into its basic steps. Gene Kelly shows what modifications are actually worth doing
and have value. Learn what is legal and what generally is not. Basic tuning and reliability
modifications, such as timing of the cartridge stops, are covered in detail along with bolt carrier
conversion to override feed jams. Learn the correct way to measure the barrel and how to properly
shorten and crown it. Learn how to install sights and to drill and tap for screws, as well as modern
epoxy installations. Gene will teach you how to refinish your gun
with Gun Kote, a modern tactical finish. After finishing, Gene
shows you how to add tactical safeties, magazine extensions, specialized followers and ammo carriers. Several different types of
stocks are demonstrated, with the advantages of each covered in detail. He takes you through a
full function test of the finished gun, discusses safe home storage and locking devices, and concludes with a demonstration of the effects of various types of ammunition on walls. If you've
ever wanted a tactical shotgun, or wondered how you could build one on your own, this is the
course for you! DVD#3274 Non-member price: $39.95 plus s/h GCA Silver Price: $31.96
10
1-800-797-0867
AGI
www.agiFall2015.com
700 Rifles
4
Look for this logo and the special GCA 'Members Only' prices throughout
this mailer and SAVE even MORE MONEY on your projects! For a
limited time we are offering a FREE one month trial membership with
every order! See all the benefits of being a GCA Member on page 19!
Custom Barrel Your
OWN RIFLES!
This detailed course shows you
how to produce professional results!
Watch this course and you will understand EVERYTHING
you need to know to complete your rebarreling project from
lathe set up to final installation and fitting. Even how to
install a muzzle brake! Your instructor Darrell Holland starts
with choosing the right type of barrel for your application,
then he shows you how to use a lathe to true the receiver and
machine the lugs to create maximum contact for smooth but tight lock-up. It’s not the machining that usually gets people into trouble, it’s the set up. Darrell shows you a simple process that
enables you to support the receiver properly in the lathe chuck.
5
Everything you need to know
to tune up your factory rifle is
covered in this course!
Worried about the detailed measurements you need to make? No worries! Darrell explains the
Before you go out and spend
simple process and how the measurements relate to the finished product. Next he laps the lugs
hundreds, or possibly thousands of
to the receiver for correct headspace, showing you the proper techniques and materials to use.
dollars on a new custom rifle, first
Even the intricate process of counter-boring and cutting the threads is covered step-by-step, in
squeeze all the potential performthorough detail. Darrell not only makes it look easy, he shows
ance out of the rifles
you exactly what to do and what NOT to do in order to get
you already own!
accurate results. Even experienced machinists and rifle builders
Darrell Holland will
will pick up tips and tricks. If you plan to have someone
show you how to cut
else do your custom barrel work, you can STILL benefit Non-member regular price: $234.75 plus s/h your group sizes in half
or more by improving
from owning this course! Knowing this detailed informaFall Sale Price: $187.80
the rifles function using
tion will help you get the most for your money and you will
GCA Silver Price: $150.24
existing parts and by
understand each step in the process. This course will help you
employing the tricks of
as you select your new barrel, choose the options for installaGCA Members $AVE $84.51
custom gun makers that
tion, and discuss the project with your gunsmith.
Mention Bundle #21 when ordering.
you can do yourself.
(Includes courses #1354, #3114, #3124, #2014, #3254)
Darrell finishes up the course by crowning the barrel and
Save big bucks by
installing a custom muzzlebrake. Again, Darrell demystifies
“Saving” your existing
the simple process of how to put a proper crown on a barrel
barrel by recrowning, setting back
and shows you how to size, select and install a muzzle brake. Throughout the course Darrell
and rethroating the chamber. When
also discusses safety issues so you understand the tolerances required as you build a safe,
to do cryo work and stress relieving
reliable, and barreled action! 120 min. DVD#2014 Non-member price: $49.95 plus ship
of the barrel and when to avoid it is
GCA Silver Member Price: $39.96
explained. Also, how to add a
heavy pinned recoil lug, blueprinting the action and lapping the lugs,
bedding for 100% contact and all
the details of perfect stock fit. Plus
- trick aftermarket parts that really
work, proper barrel break-in techniques, fitting a special firing pin,
trigger, bolt stop and why.
Although most applicable to the
Remington 700 and Winchester
Model 70 rifles, which are covered
in detail, many of the techniques
can be applied to numerous other
models as well. Over 3.5 hours!
DVD#3254
Non-member price:
$49.95 plus s/h
GCA Silver Price: $39.96
11
BUY ALL 5 COURSES
AND $AVE!!!!
PLUS FREE SHIPPING on orders over $100!
How a Retired Cop found
Happiness and a Six Figure
Income, Gunsmithing from his Garage.
Jan-Steven Merson is a successful example of an individual with a passion for firearms wanting to make
a life style change. After retiring from a career in Law Enforcement with the Department of
Corrections, Jan wanted to do something that he enjoyed and still make money. He decided he wanted
to get into Gunsmithing.
Jan began searching online to find a Professional Level Gunsmithing program. What he found was
that most Gunsmithing schools required a large commitment of time and expense. They also extensively relied on textbooks as their teaching method. Jan is very open about the fact that he has A.D.D.
so it is very difficult for him to spend a lot of time reading volumes of information. He prefers to
learn by seeing, hearing and doing. He also didn’t want to move or travel to classes. In his search he
discovered the American Gunsmithing Institute. The step-by-step DVD courses they offered were just
the answer for his style of learning.
The American Gunsmithing Institute (AGI) is the World’s Premier Gunsmithing School and through
its exclusive systematic method of video instruction has educated more working Gunsmiths than all
other gunsmithing schools combined. Instruction is provided in the comfort of the students own home, on their own time schedule
and at a greatly reduced cost when compared to traditional classroom settings. AGI has been transforming people lives and careers
for over 22 years!
Jan and Rascal, best friends,
take a break in his shop.
Within three months, Jan set up his business, American Firearms & Gunsmith in Fullerton, California and began to offer a variety
of gunsmithing services. Word got out and, four years later, Jan was a very, very busy gunsmith. He credits the AGI gunsmithing
program for his competitive edge. He can reference the DVDs again and again while in his shop and he believes that the
up-to-date information provided in the AGI DVDs give him the knowledge and skill set customers demand today. It keeps them
coming back for more and more services from his shop. Because the firearms industry is ever changing, Jan continues to invest in
his gunsmithing education by acquiring new AGI courses as they become available.
Jan may still be doing business from his garage, but with his talent for gun repair, word-of-mouth, and the addition of his website,
he states that he is now earning over $100,000.00 annually and is thinking it’s time to expand the business to a storefront. (This is
not typical. Many Gunsmiths make around $10,000-$30,000 part-time to $40,000-$60,000 or more working full-time. Many pursue gunsmithing as a fun
retirement income.)
Jan summed up his American Gunsmithing Institute experience by saying, "Do it. You may say you really don’t have the money to lay
out. Well, look at it as a short term investment. You can make money almost instantly while taking the course and start paying yourself
back almost immediately."
Unlike most trade schools, AGI's program allows you to complete your studies and get Certified in as little as three months! You
will study at home, with up-to-date video instruction that is packed with current information on the design, function and repair of
firearms. The Professional Gunsmithing Course includes over 108 hours of video instruction on pistols, revolvers, rifles, shotguns,
.22s and much more. You will also receive advice on what tools to purchase, how to set up a shop with just a small investment and
how to operate a successful business. School Code # 2800501
To hear the entire interview with Jan and get a FREE one hour video lesson and
complete "How-to Get Started in Gunsmithing" information package on how YOU
can get certified as a Professional Gunsmith call us today at 1-800-797-0867 or go to
www.AmericanGunsmithingInstitute.net
12
All packages are shipped via priority mail except where noted. Must mention offer code located on mailing panel of this mailer to receive discount offers.
Offers expire 12/15/15 and cannot be combined with any other promotional offers or discounts. Cannot be applied to previous sales.
Be a Certified Law AGI
Enforcement Armorer
Qualify to Wear this Patch!
Even if you have never been a sworn officer.
Certified Law Enforcement Armorer's Course
This certified course covers all of the current commonly used law enforcement handguns, shotguns and patrol rifles. After receiving hundreds of requests for a course that would
meet the needs of sworn officers, individuals that work on law enforcement firearms or
those who would like to, we have incorporated the following AGI DVD Armorer's
Courses along with testing and certification to create this exclusive Certified Course.
You do NOT need to be in law enforcement to take this course.
"I was trained by three Master Gunsmiths and thought my training was fairly
complete, but I was truly surprised at everything new I learned
in this course. It is direct and fully explained. Your
customer service is also very helpful and courteous."
Sincerely, David Myers, Humble, TX
Guns covered in detail include:
MP5 • Glock Pistols • Colt 1911 • S&W M&P • SIG Pistol • Springfield XD • Beretta 92
H&K USP • Ruger® Mini-14® • Ruger® Double Action Revolvers
S&W Revolvers • Remington 870 Shotguns • AR-15 Rifle
Over 23
Mossberg 500 Series Shotguns • S&W Auto Pistols 1st, 2nd & 3rd Gen.
Hours of
Each individual video Armorer's Course covers:
Complete disassembly and reassembly, detailed explanation of design, function and
internal workings using a cutaway firearm, basic troubleshooting and repair at an
armorer's level, AND . . . each course includes a printable schematic! To attend
just one factory armorer school would cost you hundreds of dollars, plus days
of time and travel expenses. This entire course is equal to attending 15
(fifteen!) factory schools - as many times as you want! PLUS you can watch
and learn at home in your spare time. Your knowledge of these firearms and
confidence in maintaining them will reach a new level.
Video
Instruction!
Course includes: 15
Armorer Course
DVDs, testing,
certification and the
Certified Law Enforcement
Armorer’s Patch.
Course #LEACKITDVD
Non-member price: $797
GCA Silver Member Price:
$637.60 plus s/h
1-800-797-0867
www.agiFall2015.com 13
ffer!
Limited time o
Advanced training on each of these popular
firearms will put you at the top of your field!
You could save $1,400.76 on these 3 courses if you are a GCA Member! What are you waiting for - Join today!
Unsurpassed close up views
Whether you are a professional gunsmith or just getting your toe in the water and want to become a
expert on these particular firearms, these are must have, advanced training courses. Don’t put this
off! Each course contains newly remastered DVDs in a dedicated course binder with bonus video
not available in any other course AGI offers. The content in each of these courses is worth many
times the full retail price of the courses. They will more than pay for themselves if you only use it
once to build a gun for yourself, or continuously, if you put the knowledge to work in your
Gunsmithing business. The testing will take your skills to a new level and you will wear each of
these patches with pride.
Order $100 or more and get FREE SHIPPING!
You will know how to build, troubleshoot and customize all of these
firearms. These courses include Design, Function and Repair knowledge from Bob Dunlap, Ken Brooks
demonstrating complete disassembly and reassembly, and complete customizing, building, troubleshooting, tricks,
tips and much more from experts in the gunsmithing field including Gene Shuey, Mark Foster, TR Graham and
others. These are simply MUST HAVE COURSES for anyone who wants to build and work on these firearms.
These courses will enable you to achieve the satisfaction of taking your knowledge to the next level and being
able to perform advanced Gunsmithing techniques. Each course includes detailed notebooks, testing, personalized
certificates, and patches to wear on your shop apron or shooting jacket upon completing your online test.
What will your specialty be? . . . Why not all 3? Well rounded is good and you save even more!!
#Cert1911 Non-member price: $1,297
GCA Silver Member Price: $1037.60 plus s/h
#CertGlock Non-member price: $1,297
GCA Silver Member Price: $1037.60 plus s/h
#CertAR15 Non-member price: $1,297
GCA Silver Member Price: $1037.60 plus s/h
14
BUY ALL 3 COURSES AND
$AVE MORE!
Non-member regular retail price: $3891.00 plus s/h
Fall Sale Price: $3,112.80 • GCA Silver Price: $2,490.24
GCA Members $AVE $1,400.76
1-800-797-0867
PLUS FREE SHIPPING on orders over $100!
AGI
When ordering mention
Bundle #3CERTIFICATION
(Includes courses #CERT1911, #CertGlock, #CertAR15)
www.agiFall2015.com
Build these Guns the Way YOU Want!
You can still build a
semi-auto AK from
a parts kit legally!
We did all the work for you!
From research and experimenting
with various construction techniques, to creating tooling, to documenting everything with drawings, we took the long way
around in order to find the BEST
and EASIEST method for building a Semi-Auto AK from a parts
kit. Because of our thorough
research and painstaking experiments, YOU can build an AK from a kit with ease and guaranteed
success. We have eliminated all the guesswork and show you a
foolproof method for building up a SemiAuto AK from a receiver or from a flat.
Follow the procedures we show you, use
the tooling we give you prints for, and you
simply can’t miss.
Whether you are starting
from a flat or with a preformed receiver, every step
in the process is covered in
detail. When we are done
3+ hours!
building our AK, we take
you through the proper safety checks and then it’s off to the range
to test fire. You’ll be impressed at how well the gun operates.
DVD#3294 $59.95 plus s/h GCA Silver Price: $47.96
NOTE: Knowledge of complete disassembly and reassembly is
recommended for this course. See course #1054 on page 4.
Master Armorer John D. Bush
shows and demonstrates
step-by-step: identifying, sorting and selecting parts and
receivers, checking parts for
wear and fit, and a clear
demonstration of the barreling
and headspacing process. Along
with total assembly and final
fitting is a discussion on how to
identify parts by manufacturer,
interesting facts and bits of history. This is the only complete
course detailing everything you
need to know to assemble an
M-1 Garand from a parts kit.
109 min.
DVD#3144 $39.95 plus s/h
GCA Silver Price: $31.96
International Firearms Expert
John D. Bush takes you
step-by-step through the
process of building an ATF
approved G-3 semi-auto rifle
using a new USA manufactured receiver and surplus
parts. Includes what parts you
need to change to stay legal!
Detailed coverage of the
barreling process, headspacing,
parts identification, parts
inspection, and everything else
you need to know. Both the
stamped steel and forged aluminum receivers are shown
and demonstrated. 92 min.
DVD#3154 $39.95 plus s/h
GCA Silver Price: $31.96
One of the best things about this gun is that it can be customized to your heart's content and there are
many options available! This is a firearm that can be taken apart with basic tools and it is a good gun to
understand how the mechanics of the gun works.
Your instructor, Jack Landis, AGI Instructor and Technical Services Manager, shows many finished configurations of the gun, just to get the creative juices flowing. After that, we methodically move on to the
various parts of the firearm that can be customized. We take a look at the heart of the gun, the receiver
(or action). You will be making choices to build a tactical, hunting or target gun. Jack explains the attributes of various barrels, stocks, trigger housings, scopes, magazines, as well as individual parts that will
enable you to make informed decisions about the type of gun you want to build before you even spend
any money. The course will allow you to create
THE AGI "RISK FREE"
a budget and blueprint your plans so you do not
go overboard or end up with a bunch of stuff
1 YEAR - 100%
that you don't really need to build your dream
"BULLETPROOF GUARANTEE"
gun.
If for any reason you are not satisfied with any AGI
Jack also spends some time at the mill and lathe showing us how to include
some practical modifications, like boring/drilling/tapping rear cleanout holes in
the receiver, squaring up the bolt face/adjusting headspace and even how to do
a trigger job. DVD#3454 $79.95 plus s/h GCA Silver Price: $63.96
1-800-797-0867
AGI
video or product purchased directly from AGI, you may
return it for a full refund (less shipping) for one full year.
Defective videos also replaced for up to one year.
The only question we'll ask is:
"How did we fail you?"
www.agiFall2015.com
15
Escape Boredom, Make Money . .
Be a Professional Gunsmith and Turn Your Passion into Profit!
Complete Certified Study-at-Home Course
Professional Gunsmithing Course - Level 1
When you repair a gun after your studies with AGI, you’ll know you
really fixed it. The complete core 108 hour course starts you off with a five hour
introduction to the world of Gunsmithing. You will learn about; special gunsmithing
tools and how to use them, filing and stoning techniques, proper use of hand tools,
firearms parts and proper terminology and descriptions, locking systems, action
types, feed mechanisms, basic ballistics, cartridges and powders, different types and
pressures, cartridge evolution, primer and bullet types and so much more. Now you are
prepared to learn the design, function and repair of firearms. The AGI Professional
Gunsmithing Course is divided into four major
sections: pistols and revolvers, shotguns, rifles, and
rimfires. It is our belief that you can’t “fix it” unless you
really understand how “it” works. Many so called gunsmiths simply
throw new parts at a problem and hope that it's fixed. We teach the why and the how.
Level 1
COMPLETE TESTING AND CERTIFICATE: As you complete the introduction to
gunsmithing and each of the four sections you will take a written multi-choice examination
to test your knowledge. If you pass, you will receive a handsome framed personalized
certificate for that portion of the course. A certificate is given for each section. In addition
to the core 108 hours of Design, Function and Repair instruction you receive in Level One
you will also get these additional bonuses:
• Gunsmithing FFL (Federal Firearms License) starter kit.
How-to Audio CD, application starter kit, forms, tags and
book. Everything you need to know to get your FFL.
• One Year of Silver Level Membership in the Gun Club of
America with GunTech Monthly Training Videos
• Professional Gun Cleaning course
• Buying and Collecting Used Guns course
• Detailed History of Smith & Wesson course
Student Tuition: $4,997 plus s/h
This is a
Stock refinishing course
Glass bedding course with kit
Shop Parts Manuals
Testing and Certificates
Ongoing Technical Support from
Professional Gunsmiths by phone and email
• One Year of Continuing Education through
Webcast Classes
•
•
•
•
•
$20,000 Value!
Professional Gunsmithing Course - Level 2
By enrolling in this advance level two course you will accelerate your learning process and
become a more competent gunsmith, able to work faster and provide more services. You will
learn how to operate a lathe and a mill, rebarrel and customize rifles, refinish firearms,
acquire advanced knowledge and so much more. To start with . . .
In Level Two you get the MACHINE SHOP COURSE
COMPLETE WITH MATERIALS AND SHOP MANUALS!
Level 2
PROFESSIONAL COURSE CA School Code #2800501
To expand your gunsmithing knowledge and ability to make repairs, the Level Two Professional course also
teaches you the next set of skills that you will want to learn: general machine shop knowledge and how to
operate a mill and lathe. In this course you’ll learn how to completely set up and operate a lathe, vertical mill
and a host of other shop equipment. Over 30 hours of video instruction! Master Riflesmith and Machinist
Darrell Holland will instruct you in everything you need to know to be able to walk up to any one of these
machines and start making parts. This is an extremely valuable addition to any gunsmith’s set of skills.
Includes test materials, books, prints and projects along with a certificate. Go to page 6 to get more details about what the Machine
Shop Course covers. AND IT'S ALL INCLUDED WHEN YOU ORDER THE LEVEL TWO GUNSMITHING COURSE!
16
. and Build a Retirement Income!
IN THE LEVEL TWO PROFESSIONAL COURSE YOU GET EVERYTHING INCLUDED IN THE
LEVEL ONE COURSE PLUS:
•
•
•
•
•
•
•
•
•
•
•
•
THE COMPLETE MACHINE SHOP COURSE - 30 HOURS!
Custom Barreling Bolt Action Rifles Course
Selecting, Understanding, and Buying Rifle & Pistol Scopes Course
Super Tuning the Factory Rifle Course
Building the Custom Mauser Rifle Course
Cowboy Action Armorer Course
Advanced Trigger Jobs and Systems Course
How to Heat Treat Carbon Steels Course
How-to Case Harden Metal Parts Course
How To Make Coil Springs Course
Learning The Art Of Making Flat Springs Course
Professional Metal Finishing and
Hot Caustic Bluing Course
• Slow Rust and Nitre Bluing Course
• Pillar Bedding Course – the advance step-by-step process to
provide accuracy
• BONUS: One week of hands-on in the classroom training
with AGI Instructors
• EXTRA BONUS VIDEO
COURSE: A DAY AT THE BENCH
WITH BOB DUNLAP: LEARN BY THE
SIDE OF THE MASTER!
Student Tuition: $6,997 plus s/h
This is a $30,000 Value!
Professional Gunsmithing Course - Level 3 - THE MASTER!
Level 3
This is the course a majority of our students choose to enroll in! It will provide you with
the knowledge and additional skill sets, including welding, that will enable to you to
advance your career even further. With the Master Level Gunsmithing Course, you will
receive 3 more certificates for 1911 Pistolsmithing, Glocksmithing and AR-15/M4
Riflesmithing. You will also receive additional training on how to be
successful not only as a gunsmith but in the gunsmithing business an absolute necessity in today's economy.
IN THE MASTER GUNSMITHING COURSE YOU GET EVERYTHING INCLUDED IN THE LEVEL ONE
and LEVEL TWO COURSES PLUS:
•
• COMPLETE ADVANCED
WELDING COURSE WITH
MATERIALS! Read more about this
•
great course on page 6.
• 1911 Pistolsmith Course
• Glocksmith Course
• AR-15/M4 Riflesmith Course
• How-to Rebarrel and Blueprint Military Bolt Action Rifles Course
•
• How to Build a Semi-Auto G-3, HK-91 & CETME Rifle Course
• BUSINESS SUCCESS SYSTEM INFORMATION PACKAGE
WHICH INCLUDES:
• 6 CDs. Interviews with AGI instructors and “How-to”
information on shop set-up, flow, problem solving, traps to
avoid, and more.
• “Tax Secrets that ‘THEY’ Don’t Want You To Know About” CD
• Exclusive Gunsmithing First Ever Flat-rate Job Book
Know how much you should charge for your work!
• Marketing Manual that teaches you how-to market your business.
• The Secret Life of Bob Dunlap – Inside Bob’s Head 4 DVDs! You'll learn just why Bob is a Master Gunsmithing Instructor
School Code #2800501
PLUS: 2 vouchers for a 1/2 hour
phone consultation with Master
Gunsmith Robert Dunlap.
Business Success Tool Kit Series:
12 audio CD “Mini-MBA” Series The core secrets to operating ANY
successful and profitable business.
BONUS: One week of hands-on in
the classroom training with AGI Instructors
This is a $40,000 value when compared
with a campus based gunsmithing school!
Student Tuition: $9,997 plus s/h
Call 1-800-797-0867 now to speak to a student advisor!
Want the ultimate course of instruction and the opportunity to kick off
your new career at full speed? Then TURN THE PAGE . . .
17
Professional Gunsmithing Course - Level 4
THE ENHANCED MASTER
GUNSMITHING COURSE
This is a turn-key gunsmithing system
which includes COMPLETE TRAINING and
a COMPLETE TOOL PACKAGE!
If you want to get started in gunsmithing immediately and possess
all the information available plus a complete turn-key set of tools,
this is the course for you. A number of students wanted everything
they needed for doing complete gunsmithing repairs and basic
This is only Part of the COMPLETE Turn-key Gunsmithing System!
customizing in a small home size shop, without them having to
Check out all the tools that you'll get below!!!!
spend a lot of money and time shopping around in dozens of different
1 Year
stores. So we interviewed our top instructors and they recommended the tools that we include in this package.
Satisfaction
GUARANTEE
If you really want to get started fast without breaking the bank, this package will allow you to accomplish that goal.
ENHANCED MASTER!
ON EVERY
DVD
IN THE ENHANCED MASTER GUNSMITHING COURSE YOU GET
EVERYTHING INCLUDED IN THE LEVEL 1, 2, AND 3 COURSES PLUS:
• Firearms Appraiser Course— make money appraising guns and bring even more business into your shop!
• Expansion Modules: additional 100 hours of fully indexed firearms training and reference videos.
Pistols—over 65 additional handguns, Rimfire Rifles—dozens of additional models, Shotguns—over 30 additional shotgun models
and systems, Rifles— additional models and systems
• Design, Function and Repair Live Courses —
a series of classes that were recorded
• Complete DVD library of 60 Armorer’s Courses
• Personalized Gunsmithing Website—
help jump start your business
• BONUS: One week of hands-on in the classroom training
ENHANCED MASTER TOOL PACKAGE!
AND THE TOOLS!
THE COMPLETE TOOL PACKAGE CONTAINS:
• Gun Coat Airbrush
• 7" x 12" Bench Top Lathe
Metal Finishing Kit
• 6" Wire Wheel
• Plastic Mallet
• Belt Sander with disc sander
• Dental Pick Set
• Bench Grinder and Wire Brush
• Thread Gauge
• Bench Top Drill Press
• Digital Calipers
• Gunsmithing Bench Vise
• Brass and Steel Punch Set
• Foredom Hand Grinder with cutters
• Pliers Set and Diagonal Cutter
and bits, Flex Shaft, Handle and
• Professional File Set and Needle File Set
Variable Speed Foot Control.
• Safety Glasses and Oil Mat
• Complete Set of Gunsmithing
• Gunsmith’s Bench Block
Screwdrivers
• Laser Boresighting System
• Oxy-acetylene Torch, Tip and
(for collimating scopes)
Regulator Kit
• Electronic Trigger Pull Gauge
(tanks not included)
• Rifle Holding Cleaning Fixture & Cradle
• Brass Punch Set
• Gunsmith Parallel Jaw Pliers
• Steel Pin Punch Set
• Set of “Jack First” Three Volume
• 4 oz Ball Pein Hammer
Parts Schematics Catalogs
• 8 oz Brass Hammer
• Gun Parts Corp Reference Manual
• 2 oz Ball Pein Hammer
PROFESSIONAL COURSE CA School Code #2800501
•
•
•
•
•
Brownells Gunsmithing Catalog Offer
6" x 1/2" Norton Trigger and Sear Stones
Screw Gizzie (for grinding screws to fit)
Mauser Bolt Extractor Pliers
and other goodies . . .
Notice: The tools in this package are representative and models,
manufacturers or items are subject to availability and change without notice.
This is over a $50,000 value including tools!
Unsurpassed education in the comfort of your own
home at your own pace that will created a lifetime
of income and opportunity for only $14,997 You CANNOT beat that! ACT NOW!
Call a student advisor now at 1-800-797-0867 and ask for
18 the Special Fall prices on all AGI Professional Courses!
We want you to see just how fantastic being a SilverPLUS Member of the GCA is!
With your order you will automatically receive a FREE* Trial Membership in the Gun Club of
America. That's a $30+ value - FREE! Here's what you get . . .
GunTech DVD Magazine: An exciting 2 Hour Firearms Technical Magazine on DVD Video! Every month we mail
you one of these collectible DVDs. Each issue contains exclusive information, bench and field evaluations of new
and interesting guns, workbench tips, technical "how-to" tips, gun and gun related product evaluations, tool
reviews and demonstrations, along with clearly presented and detailed projects that YOU can do. We interview some of the most interesting people in the firearms industry, take you on factory and museum tours,
provide shooting instruction and tips, and go behind the scenes at the SHOT Show every year. (The SHOT Show is
restricted to only people in the firearms industry which means that you can't get this "behind the scenes" look anywhere else!)
PLUS each and every month we present a complete disassembly/reassembly course on a rare, unique,
interesting or popular firearm. For anyone in the industry such as an FFL Dealer, gunsmith, pawn broker, law enforcement
armorer or serious firearm hobbyist, this one section ALONE is worth the entire monthly
investment in membership.
The GCA Connection: The GCA Connection is your full color monthly newsletter which includes
columns, articles, and tips by our staff and fellow GCA Members, along with GunTech's monthly
program guide, GCA Specials, discounts offered directly from manufacturers, and a wealth of other
information!
HOT BRASS Magazine: a bi-monthly firearms magazine from the GCA that contains
interesting articles, how-to projects, shooting tips, contests, and more!
GCA Connection and GunTech #112
Industry Discounts: Each year you will receive coupons good for thousands of
dollars off products and firearms from various manufacturers. You will also enjoy the
20% GCA "Members Only" Discount that applies to courses ordered from the
American Gunsmithing Institute.* *Excludes state certified courses, books, and tools.
Members Only Website: On this website you’ll find a how-to gunsmithing discussion board, industry news, source directory of
gunsmithing parts, supplies, manufacturers, gunsmithing articles, stories, and much more! Technical Support: Have questions about guns or gunsmithing? Get your questions answered! GCA Members receive technical support from Master Gunsmiths by phone and email. You'll also get complete online access to all past issues of GunTech.
LIVE International Meetings/TeleSeminars/Webcasts: Monthly live video webcasts over the internet. During the shows we have a
lot of fun, give away prizes, review products and tools, answer your questions, offer specials and more!
SPECIAL RISK FREE TRIAL MEMBERSHIP OFFER: Get 1 FREE* issue of GunTech DVD Magazine and The GCA Connection Newsletter along
with FULL ACCESS to the GCA "Members Only" Website and all the other benefits highlighted above. *There is a one time fee of only $9.97 to cover
the shipping and handling for the free issue. On the second month you can tell us to stop or we will automatically charge your credit card $29.95 a
month and continue to send you the monthly GCA Connection Newsletter, the monthly GunTech DVD and provide you full access to the website along
with online support and discounts. If for any reason you decide you do not want to continue your GCA membership, simply call us and we will cancel
your membership immediately. SATISFACTION GUARANTEED!
Mention or enter the offer code on your mailing label when ordering!
The Gun Club of America is “The insiders source for reliable
firearms information and training.” Join us today!
19
The American Gunsmithing Institute has trained MORE working Gunsmiths than any other school!
Sale Ends 12/15/15