IMT MEA_11062014 - MyEquipAuctions.com

Transcription

www.myequipauctions.com
industrial division
construction
division
the weekly digital marketplace for construction auctions
the weekly digital marketplace for industrial auctions - November 6, 2014
EQUIPMENT AUCTIONS • EQUIPMENT FOR SALE • EQUIPMENT AUCTIONS • EQUIPMENT
FOR SALE • EQUIPMENT AUCTIONS • EQUIPMENT FOR SALE • EQUIPMENT AUCTIONS •
EQUIPMENT FOR SALE • EQUIPMENT AUCTIONS • EQUIPMENT FOR SALE • EQUIPMENT
Bidding Begins
Closing:
Tues.,
Nov.
11th
• 6PM
industrial
division
AUCTIONS • EQUIPMENT
FOR SALE
• EQUIPMENT
AUCTIONS
• EQUIPMENT
FOR SALE •
EQUIPMENT AUCTIONS
• EQUIPMENT
SALE
• EQUIPMENT
AUCTIONS • EQUIPMENT
Preview:
Monday,FOR
Nov.
10th
• 10AM-2PM
Wednesday,
Nov. •12th
• 9AM-5PM
EQUIPMENT FORRemoval:
SALE • EQUIPMENT
AUCTIONS
EQUIPMENT
FOR SALE • EQUIPMENT
AUCTIONS • EQUIPMENT FOR SALE • EQUIPMENT AUCTIONS • EQUIPMENT FOR SALE •
Exact address TBA, Santee CA 92071
AUCTIONS • EQUIPMENT FOR SALE • EQUIPMENT AUCTIONS • EQUIPMENT FOR SALE •
AUCTIONS • EQUIPMENT FOR SALE • EQUIPMENT AUCTIONS • EQUIPMENT FOR
SALE • EQUIPMENT AUCTIONS • EQUIPMENT FOR SALE • EQUIPMENT AUCTIONS •
SALE • EQUIPMENT
• EQUIPMENT
SALE • EQUIPMENT
PleaseAUCTIONS
visit website
on 11/9 FOR
for address
release. AUCTIONS •
www.McCormackAuction.com
INDUSTRIAL
AUCTIONS
EQUIPMENT
FOR SALE
• EQUIPMENT AUCTIONS • EQUIPMENT FOR SALE • EQUIPMENT
1
Machine Shop Auction-Online Only
619-447-1196
industrial division
Click Here to Visit our
http://www.industrialmachinetrader.com/calendar/AuctionsCalendar.cfm?calendar_type=AU
Auction Calendar
INDEX
Browse the publication
page-by-page to view all
industrial auctions
- OR -
Click below to go directly to the
region of your choice.
Looking for a specific piece of equipment?
Use the search button located at the bottom of each page
to directly link you to the equipment you need.
East
South
Midwest
West
Online/International
2
East
ONSITE & LIVE WEBCAST AUCTION
VICTORY REFRIGERATION
110 Woodcrest Road • Cherry Hill • New Jersey
SALE DATE:
Thursday, November 13th • 10:30 A.M.
Inspection: Wednesday, November 12th
8:00 A.M. to 4:00 P.M. and morning of sale
FEATURING:
•AMADA LIBRA 206
HIGH SPEED CNC PUNCHING CELL
•CNC TURRET PUNCHES
•CNC PRESS BRAKES
•PRESSES
•SHEARS •TOOLROOM
•FORKLIFT TRUCKS
•AIR COMPRESSORS
•MOLDS & FIXTURES FOR ASSORTED
REFRIGERATION PANELS
•FOAM UNITS
•AND MORE!
www.bidspotter.com/forms/event.php?event=16035
Register To Bid Online At:
http://www.bidspotter.com/en-us/auction-catalogues/koster-industries/catalogue-id-bscko10134
Buyer’s Premium Applies
For more information visit our website
www.kosterindustries.com
farming division
construction division
industrial division
3
East
Hydraulic Cylinder Manufacturer
Plant Closed
MID-ATLANTIC MFG. & HYDRAULICS, INC.
708 Milk Plant Road, Rural Retreat, Virginia 24368
Sale Date: Wednesday, November 12 at 12:00 Noon
Inspection: Day Prior from 12:00 Noon to 4:00 PM
Featuring: (2) Mitsubishi Model M-H-30-D CNC Horz. Machining
Centers, Warner & Swasey Titan Model 6167 Four-Axis Universal CNC
Turning Center, 18” x 120” Warner & Swasey Model SC20 CNC Turning
Center, 28” x 98” Warner & Swasey SC25 Model 4500 CNC Turning
Center, Cincinnati Milacron Model 18” x 60” Cincinnati Milacron
Model ML Shaft Cinturn CNC Turning Center, 18” x 40” Cincinnati
Milacron Cinturn CNC Chucking Lathe, 100 Ton Hannifin Model
S1000-41-SP C-Frame Hyd. Press, 150 Ton Hannifin Model F-150-41X-SP C-Frame Hyd. Press, Sierra Hyd. Cylinder Skiving & Burnishing
Machine, 12’ x 16” Dia. Cylinder Polishing Machine, Wisconsin EWN510- 6G Natural Gas Batch Oven, Kearney & Trecker Model 430TF
Vert. Milling Machine, Kearney & Trecker No. 6 Vert. Milling Machine,
Radial Arm Drills, Toolholders, Tooling & Machine Accessories.
15% On-Site & 18% On-Line Buyers Premium
http://www.bidspotter.com/en-us/auction-catalogues/bscci/catalogue-id-bscci10133
Live
on the Internet via:
Jeffrey L. Luggen / Auctioneer
http://www.bidspotter.com/en-us/auction-catalogues?ClientId=31a184ec-96cd-4b95-b068-a289013196cf
www.cia-auction.com
farming division
4
industrial division
East
http://www.bidspotter.com/en-us/auction-catalogues?ClientId=5cde8231-f8fd-43a8-9943-a28a0063f84f
www.CenturyServices.com
farming division
industrial division
5
East
NOTICE OF IRS PUBLIC AUCTION
Date: Wednesday , December 3, 2014 • 10.00 AM
Sale Location: 210 Holabird Ave Winsted, CT
Open House: December 2, 1.00 PM to 4.00 PM
Description of Property
Spring Manufacturer Entire Facility
Wire Springs & Metalworking Equipment
Over 80 Lots of Machining
Equipment & Manufacturing Tools
Sybron/Thermolyne Furnace • Bridgeport Milling
Machine Besley Grinders • Torrington Precision
Springmakers (QTY 5) • Raytech Finishers • Band
Saws • Grinders • Link Spring Testers • Kick Presses
Tooling Lathes • Metal Stock.
All Payments cash or certified.
For additional information about the property
and auction
visit us on the web at www.irsauctions.gov
or Call Tim Smith PALS (401)
369-2172
farming division
6
industrial division
East
ONLINE ONLY Auction
STARTS: MONDAY, DECEMBER 1st
ENDS: THURSDAY, DECEMBER 4th @ 10 am
INSPECTION: Tuesday, December 2nd, from 9am – 4pm
Maro Precision Tool Co.
12400 Merriman Rd. • Livonia, MI 48150
Online Public Auction by the Order of the Owner
Complete
tool & die facility featuring CNC machines • DeVlieg Jigmils
http://www.bidspotter.com/en-us/auction-catalogues/williams-and-lipton/catalogue-id-bscwi10027
DeVlieg Tables • Grinders • Mills, Lathes • Toolroom Equipment • Large
quantity machine accessories and support equipment.
16% BUYER’S PREMIUM
VISIT OUR WEBSITE FOR A COMPLETE LISTING!
www.williamsandlipton.com
WILLIAMS & LIPTON COMPANY
National business asset auctioneers & appraisers
farming division
32316 Grand River Ave. Suite 101, Farmington, MI 48336
PH: 248.478.2000 • FAX: 248.478.4046
WEBSITE: www.williamsandlipton.com
industrial division
7
East
ONLINE ONLY
auction
AUCTION DATE:
NOVEMBER 12th • 10:00 A.M.
Preview on November 10th & 11th • 9:00 am to 5:00 pm.
Pickup: November 14th,17th 9am to 5pm and 15th 9 am to 2 pm
Cat 50 Tool Holders, Cat 40 Tool Holders,
Drills, End Mills, lathe Tools, Hand Tools,
Power Tools, Angle Plates, Knockout
Punches, Scissor Lift, Logan Lathe, Gorton
Vertical Mill, 3 Honda 125 4 Wheelers,
Tri-Axle Trailer, Antique Hardinge Cataract
Lathe, Paint Shaker, and Much Much More.
Phone: 248-536-2777
Email: [email protected]
www.ltcauctionsonline.com
farming division
8
industrial division
East
LARGE CAPACITY CNC &
CONVENTIONAL MACHINING FACILITY
PUBLIC
AUCTION
WEBCAST & ONSITE
THURS, NOV 20 @ 10AM
EST
PREVIEW & INSPECTION:
Wed., Nov. 19 from 9am-4pm or by appointment
2397 E. Huron Rd. • Au Gres, MI
Featuring: FADAL VMC 65-35/30 • FADAL VMC 4020 • UNION 130/6 CNC Boring Mill • LUCAS 40T CNC Boring Mill • ELGAMILL CS-10 Boring Mill • INGERSOL Boring Mill, 54”x120” Table • LIBERTY Planer Mill, 68”x216” Table • SNK
FSP-5011 Boring Mill • AMERICAN 42”x288” Lathe • MONARCH 33”x192” Lathe
• LODGE & SHIPLEY 33”x144” Lathe • AMERICAN Pacemaker 42”x120” Lathe
• KING 60” Vertical Lathe • WASINO LS-63M 3-Axis Turning Center • PACIFIC
300-12 Hydraulic Press Brake • HERCULES ½”x10’ Hydraulic Shear • BUFFALO
1/3” x 96” Roll • BURDOX 120 Flame Cutting Machine • (5+) Toolroom Lathes • (2)
MATTISON 18”x72” Surface Grinders • (10+) Various Surface Grinders • BARBER
COLEMAN Type 6A Gear Hobber • G&E 42” Gear Hobber • Radial Drills, MILLER
& LINCOLN Welders, Plasma Arcs • Vertical and Horizontal Bandsaws • SHEFFIELD RS-150 CMM • MAGNAFLUX Machine • WIGGINS W80AT-96 Forklift •
I-R 40hp Air Compressor • 30-Ton Overhead Crane • (3) 3-Ton Cranes • (17) Jib
Cranes • Car Bottom Oven 2300°F Max. Temp. • Paint Room • Large Quantity
of Steel Stock, Scrap Steel, (100+) Cat 50 Tool Holders, Surface Plates, Height
Gauges, Micrometers, Air Gages, Calipers and More
Contact Mario Mazzuca at 248-569-9781 [email protected]
[email protected]
Sale Conducted by
In Conjunction with
AUCTIONS http://www.bidspotter.com/en-us/auction-catalogues/www-maynards-com/catalogue-id-biditu10031
| LIQUIDATIONS | APPRAISALS
21700 Northwestern Hwy., Suite 1180
Southfield MI 48075 Tel: (248) 569-9781
www.maynards.com
www.maynards.com
farming division
Bid in real
time via the
internet.
industrial division
9
East
FRITZ
Real Estate & Auctions
Date: November 15
Time: 9:00 a.m. preview, 8:00 a.m.
Location: KUB Warehouse 19 N. Texas Ave
Contents of former machine shop to be sold TO THE
HIGHEST BIDDER REGARDLESS OF PRICE.
IRS AUCTION
Tuesday, Nov 25th • 11:00 am
1022 East 33rd Street • Hialeah, fl
Property: Stamping Equipment & Supplies
Only the right, title and interest of the Taxpayer in and
to the property will be offered for sale. If requested, the
Internal Revenue Service will furnish information about
possible encumbrances, which may be useful in determining the value of the interest being sold.
Cincinnati Auto Shear #1012, CNC operated Cincinnati #5 Mechanical Brake
Press. CNC operated with Auto Gauge, Cincinnati #9 10' Press Brake with
Hunco Auton Bend, CNC operated D-BUR-RWhitney milling machine, Timesavers Sanders #948 Mini Belt • 2 Comaca Notchers • Band Saw • Iron Crafter
Model 30/30, dual 30 ton punch and 30 ton shear Ellis Band Saw Tool Kraft
belt sander mounted on work table chop saw • 2 work tables • misc cutters
and tips • large assortment of tooling.
10% Buyers Premium, cash, check with verifiable bank letter wire transfer,
removal at buyers expense
Fritz Real Estate and Auctions
Fritz Fedele
AU 2871, AB 2650
321-229-0722
fritzofcentralfl.com
954-740-2421
www.irsauctions.gov
[email protected]
PUBLIC AUCTION
Retiring (Paul Vlack Co, Inc.) Longtime 60+ years in metal fabricating business at 410 W. Waterloo
CANAL WINCHESTER, OH. 43110. US. RT. 33 take Gender Rd. South to Waterloo Rd, then left to sale.
THURSDAY, NOVEMBER 20th •10 AM
TRUCKS, JCB, LIFTS & EQUIPMENT
2005 Chev. 2500 HD pickup; 2002 & 1999 Chev. 3500 utility trucks; 1983 Chev. 70 truck w/dump bed;; JCB R/T (506-B forklift w/4’x8’ man
basket (4004 hrs.); BOBCAT – 753 D skid steer; 10’ skid steer trailer; 8’x27’ tandem axle trailer; FORKLIFT – Komatsu FG-25; Mayville
20”x26’ platform lift; MISC.- Scaffolding; Misc. racks; Misc. steel (I beams, angle iron, etc.); Large amt. of hdw.
METAL FABRICATING & SHOP TOOLS
Columbia ¼”x10’ shear (510-FSG); Columbia ¼”x8’ brake; Scotsman 65 Ton shear/punch (Mod. 6508); Edwards 55 Ton shear/punch; Nitto
Self Erace porta-punch; RMD pipe bender: Jancy pipe notcher; 8’ & 24’ steel layout tables; 900 Plasma torch; Plasma track torch; Miller
XMT 300 wire feed welder w/boom; Lincoln CV-300 wire feed welder w/boom; Lincoln LN-25 wire feed welders; Miller trailblazer welder
generator; IR 50 gal. air compressor (3 Ph.); Spectro-physics E-1 laser; Fiberglass step ladders; Power & Hand Tools.
OFFICE EQUIP., CAD & COLLECTIBLES
Computer system w/SSDCP steel detailing (CAD) software; HP Design 500 (48” Plotter); COLLECTIBLES – Late 1800’s Buff & Buff
(#3395) transit; 1940’s Fennel (#65884) transit; Misc.
Terms – Cash or Check with Photo ID. See auctionzip for full sale bill, pics and terms.
Sale Conducted By Rawn’s Auction Services
Auctioneers – Tom Rawn 614-833-2454 & Assoc.
www.rawnauctions.com and www.auctionzip.com (ID 4889)
10
farming division
industrial division
South
Precision CNC Machining Facility / Plant Closed By Order of the United States Bankruptcy Court
Eastern District of Tennessee • Southern District of Chattanooga
Case No. 14-10532
EAST TECH COMPANY DESIGN & MANUFACTURING
3115 Freeman St., Chattanooga, TN 37406
Sale Date: Tuesday, November 18th • 9:00 AM
Inspection: Day Prior from 10:00 AM to 4:00 PM
Mazak CNC Turning & Machining Centers: 2004 Mazak VTC 300C Vertical Machining
Center, (2) 2008 Mazak 510C-II VMC’s, (2) 2006 Mazak • 510C VMC’s, (2) 2008 Mazak
QTN 350-II CNC Turning Centers, 2005 Mazak • QTN 350 CNC Turning Center, 2004 Mazak
QTN-200 CNC Turning Center & Lg. Qty. Tooling. EDM Machines: 2005 Mitsubishi FA20S
Wire EDM, 2007 Hansvedt MX20 EDM Machine. Machine Tools: (2) 2001 & 2004 Acer High
Precision Vert. Milling Machines, DC Morrison Model KX1 1 ¼” Key-Seater, • 2002 Acer AGS1224AHD Surface Grinder, Sharp RD-1230 Radial Drill, 2004 • Acer 1440G Precision Lathe,
Lucifer R07 KHE-24 Heat Treat Furnace. Horz. & Vert. Band Saws: 2006 HEM Cyclone
Auto-C Horz. Band Saw, 2003 DoAll C-916S Horz. Band Saw, Do All Contour Vert. Band
Saw. • CMM/QA/Inspection/Welders: 2007 Zeiss Contura G2 RDS CMM, 2009 • Telesis
20FQ Laser Marking System, 2007 Rockwell Qualirock Advanced Digital Hardness Tester,
Miller Deltaweld 452, Miller Tig Welder, Esab Migmaster 250 Welder. Material Handling &
Plant Support: Caterpillar C6000 Propane Forklift Truck, Caterpillar G015 Propane Forklift
Truck, • 2006 Kaeser ASD30T 30HP Air Compressor, EZ Go Golf Cart, Tennant Model T5
Fast Walk Behind Floor Sweeper/Scrubber, Lg. Qty. Shop & Support Equipment.
15% On-Site & 18% On-Line Buyers Premium
http://www.bidspotter.com/en-us/auction-catalogues/bscci/catalogue-id-bscci10134
Live on the Internet via:
farming division
www.cia-auction.com
industrial division
11
South
farming division
12
industrial division
South
farming division
industrial division
13
South
Complete Liquidation of Outlaw Industries, llc
TOOL & FAB AUCTION
Thursday, November 20th - 9am
Clinton, LA
392 Louisiana 37, Clinton, LA 70722
Facility Closing & Everything Goes!
Industrial Fab Shop Liquidation including, Steel Beam Press,
Forklifts, Welders, Air Comp., Saws, Shop Tools, Trucks, Trailers,
Thousands of lbs of Steel, etc...
LOUISIANA
AUCTIONEERS
ASSN., INC.
LAA
Visit Our Website for All The Details! www.HendersonAuctions.com
Questions? Call: 800-850-2252
Make Plans Now to Attend or Bid Online at www.HendersonAuctions.com
Controlled Automation Beam
Line BLW-Retro & Hyd-Mech
M20A Hyd Band Saw
HendersonAuctions.com
PO Box 336 Livingston, LA - 225.686.2252 fax 225.686.0647
Auctioneer: M. Henderson - LA Lic# 136 -14 / 12% Buyer’s Premium
bid
ONLINE
BIDDING
AVAILABLE
farming division
14
industrial division
South
• Public Auction - Online & Onsite •
Banah International Group, Inc.
Bankruptcy Case No.: 13-13954-AJC
Auction Date: Tuesday, December 9th at 10am Location:215 S.E. 10th Avenue, Hialeah, Fl 33010
Preview/Inspection Date: Dec. 1st from 10-4pm, Dec. 8th from 10-4pm and morning of sale 9-10am
Sale will consist of Exceptional State-of-the-Art Liquid and Granular Sugar Processing Plant (300,000 Sqft. Facility):
Granulated Sugar Filling and Packing Lines • Liquid Sugar Filling and Packing Lines • Brand new Pasteurizer System
• Compressors • Sugar Production Line • Warehouse Equipment • Large Qty of New Plastic Containers • 14’ Box Truck
• Forklifts • Server Equipment • Office Furniture, Office Equipment • Pallet Racking • Liquid Flavoring • Packaging
Materials and Boxes
For Catalog & Photos visit us @ www.moeckerauctions.com
(954) 252-2887 or (800) 840-BIDS (2437)
Can't make it to the site?
Bid Online At:
Condition: All items are as is, where is, with no warranty expressed or implied. • Payments: Full payment due on auction day. Onsite buyer’s
premium: 10% bp will apply to all purchases. • Online buyer’s premium: 13% bp will apply to all purchases.
www.proxibid.com/asp/AuctionsByCompany.asp?ahid=3976
3613 N 29th Avenue, Hollywood, Fl 33020
Toll Free 800-840-BIDS (2437) • Phone: 954-252-2887
[email protected]
AB 1098, AU 3219, Eric Rubin
www.moeckerauctions.com
We can help you stand out from the crowd...
farming division
industrial division
CALL US AT: 800-203-9960
15
Midwest
AUCTION
STARTING: NOVEMBER 25
LOTS BEGIN ENDING: DECEMBER 2 @ 11:00 AM
BY ORDER OF THE BOARD OF DIRECTORS
AN AUTOMATION BUILDER
34021 JAMES J POMPO
FRASER, MI 48026
INSPECT: NOVEMBER 25, 9:00 AM – 5:00 PM
MACHINING CENTER: 2013 HAAS MODEL VF-3 VERTICAL MACHINING CENTER, S/N 1105639, 40 X 20 X 25, W/
PROBING
TURNING CENTER: 2013 HAAS MODEL TL-2 CNC TURNING CENTER, S/N 3095477
CMM: CREAFORM C-TRACK 780 CMM W/ BENRO TRI STAND, CONTROL, HP CORE I7 LAPTOP, CREAFORM 2012
HANDY PROBE, AMSCOPE 11X-80X ZOOM MONOCULAR MICRO SCOPE W/ 5M PC CAMERA
MILLING MACHINES: BRIDGEPORT BY HARDINGE 2 HP VERTICAL MILLING MACHINE, S/N HDNG5001M, 2 AXIS
DIGITAL READOUT, POWER FEED TABLE, TORQUE RITE DRAW BAR;
BRIDGEPORT 1 HP VERTICAL MILLING MACHINE, S/N 229364, 2 AXIS DIGITAL READOUT, POWER FEED TABLE;
KEARNEY & TRECKER MILWAUKEE 315 TF-16 VERTICAL MILLING MACHINE W/ ACU-RITE III, 3 AXIS DIGITAL READOUT, 68” TABLE (LOCATED IN PLYMOUTH, MI)
PAINT BOOTH: 2013 TITAN PAINT BOOTH, MAX FT10-10-15-24, S/N 09132013ECKA (NEVER INSTALLED)
SAWS: HYDMECH S-20 SERIES III HORIZONTAL METAL CUTTING BAND SAW, S/N 6C03131974;
WF WELLS MODEL W-9-1, 16 X 20 HORIZONTAL METAL CUTTING BAND SAW, S/N W127464; PRM MODEL RFGGKV50 VERTICAL METAL CUTTING BAND SAW, S/N V501689, W/ BLADE WELDER
SHEAR: BETENDER MODEL 4’ X ¼” SHEAR, S/N 393-85
IRONWORKER: MARVEL “SPARTAN” MODEL IW50S IRONWORKER, S/N IW50S-270
GRINDERS: KO LEE S1024P-523 HYD. SURFACE GRINDER, S/N 2884; REID 6 X 18” HYD. SURFACE GRINDER,
MODEL HYD., S/N 21877
LATHE: NARDINI “MASCOTE” MS1440E QUICK CHANGE GEARED HEAD ENGINE LATHE, GAP BED
MISCELLANEOUS MACHINERY: STATE D24 DISC SANDER, S/N 938; HYPERTHERM POWERMAX 85 PLASMA CUTTER; MILLER MILLERMATIC 35O- WELDER; SUNNEX 5220, 20 TON 2 POST PRESS; 2012 MHC 4816, 48” PAN & BOX
BRAKE, S/N 20121019014; RIDGID 1822-1 POWER THREADER; DANA MODEL T-400 COLL-O-CRIMP I; PALMGREN
DOUBLE END PEDESTAL GRINDER; TRINCO 48/BP BLAST CABINET, S/N 70297-11; 2) CLAUSING 20 PEDESTAL
DRILL PRESSES; DOUBLE END PEDESTAL POLISHER; BALDOR TOOL GRINDER
AIR COMPRESSOR: SULLAIR “SHOP TEK” ST1500 AIR COMPRESSOR (ST1509RD), S/N 201205100028 W/ RN100 AIR DRYER
TRUCK: 2000 DODGE RAM SINGLE AXLE STAKE TRUCK, V/N 3B6MC3667YM226894, 186,943 MILES, DIESEL MOTOR
FORK LIFT: NISSAN MODEL GRGH02F35V APPROX. 7,000# FORK LIFT TRUCK, PROPANE, HARD RUBBER TIRES, TRIMAST, SIDE SHIFT
MISCELLANEOUS: APPROX. 15 BUSS PLUGS W/ MISC.; MGM 75 KVA TRANSFORMER; MISC. SHOP EQUIPMENT &
INVENTORY, OFFICE & MUCH MORE
VISIT
www.rjmauctions.com FOR ALL INFO, PHOTOS & TO BID
SALE CONDUCTED BY
R. J. MONTGOMERY & ASSOCIATES
695 Amelia ST., PLYMOUTH, MICHIGAN 48170 • PHONE: (734) 459-2323 • FAX: (734) 459-2524
MUCH MORE INFORMATION & PHOTOS AT OUR WEBSITE:
www.rjmauctions.com
16
farming division
industrial division
Midwest
farming division
industrial division
17
Midwest
Fall Equipment &
Truck Auction
Sat. Nov 15th @ 9am
Stoutsville Ohio Auction Facility
Zahner Metal Equipment
Liquidation!
Items at 1400 E 9th St, Kansas City, MO 64106
Tuesday November 18th 7PM * 23 Items
Compressed Air Dryer • Famco Press • Engel Form Machine • Saws
Roll Former • Single Punch • Pressure Washer • Generator • More!
7060 SR 674 S, Stoutsville, Ohio 43154
THIS IS AN ONLINE ONLY AUCTION BOUND BY ALL LEGAL RIGHTS AND
REMEDIES IN THE STATE IN WHICH THE AUCTION OCCURS.
1-888-685-1269
www.Equip-Bid.com
Click Here
to Visit the
• Commercial Trucks & Support Trailers
• Agriculture & Lawn Garden
• Construction, Excavating & Mining
• Wagon Loads of Smalls
For More pictures & information on
our 150+ large unit auction:
Auctionzip.com #6240
Auction Calendar
online bidding available
www.dunndealauctions.net
(614) 946-6853
18
farming division
industrial division
West
STUART BATTY ENTERPRISES (SB TOOLS)
INTERNET ONLY AUCTION - Bid Online at www.RollerAuction.com
Tuesday, Nov 18th
10:00 A.M.
1797 Boxelder Street •
Louisville, CO 80027
Late Model CNC Equipment
2011 Doosan VC510
Inspection: Nov. 17th from 9am to 4pm
2011 Doosan DNM400 HS
Auction Features: Doosan Vertical Machining Centers - Doosan Lynx Turning Center - Danobat & ELB-Florida
Surface Grinders - Mega Gundrill - Trumpf TruMark Laser Marker - Hyd-Mech S-20A Auto Band Saw - Trak CNC
Lathe - Trak CNC Mill - Forklift - Misc. Machine Shop Equipment - Mac Pro Computers - Much More!
farming division
Roller & Associates, Inc.
Mega Gundrill
Danobat RT1350CF
2011 Doosan Lynx 220LC
7500 York Street • Denver, Colorado 80229 • (866) 515-1668 • www.rollerauction.com
www.myequipacutions.com
is
g div
in
farm
ion
industrial division
ivisio
n
d
the weekly digital marketplace
tion for industrial auctions
truc
cons
indu
stria
l div
ns
ctio
rial au
indust
e for
etplac
ly
ek
the we
l mark
digita
ision
NEW
EVERY
WEEK!
Monthly Public AUCTION
Second Saturday of the Month • 8am
3570 Grand Avenue, Phoenix, AZ 85019
Preview: Friday Before Auction 8am-5pm doors open at 7am morning of sale
Consign your Equipment with Us:
* Below Market Consignor Rates
* Customized Marketing Campaign
* Commercial, Industrial and Construction Assets
* Contact Nick Carr for Details
EVERY FRIDAY
1
CALL 800-203-9960
For Details
farming division
1
industrial division
602.242.7121
www.SierraAuction.com
19
International/Online
ONLINE AUCTION!
LATE MODEL PRECISION MACHINE TOOLS, INJ.
MOLDER, MUCH MORE!
Bid close Tuesday, November 18th • 11:00 A.M.
LOCATION A:
MULTI TEK MACHINING INC.
4721 Commercial Drive N.W.
HUNTSVILLE, ALABAMA 35816
LOCATION B:
STORAGE FACILITY
436 Abingdon Avenue
HUNTSVILLE, ALABAMA 35801
Bid on-site or bid via
CNC HZ. MACHINING CENTER: Haas EC300 twin 11.8” pallets, 2011, 12,000 RPM, 4th axis table
3-AXIS CNC LATHE: Doosan LYNX 220LM, 2007, Fanuc 0i-TC ctrl., 12 sta. turret w/(3) live positions
MAGAZINE BARFEED: MTA V-65E,
2011 CNC SWISS TYPE TURNING MACHINE: Hanwa XD220H 5-axis, 2008 w/MTA bar feed
MULTl-SLIDE CNC LATHE: Lico LNT36S 8-AXIS, 2011, Siemens 840D w/MTA bar feed
CNC THREAD WHIRLER: Monnier & Zahner M621, Fanuc 18M, 200mm
(2) DOALL HORIZ. BANDSAWS: DC-280NC, 2012, 11” round capacity • C410A 14”x16” capacity
CNC PLASTIC INJECTION MOLDER: Netstal N820/200MPS, 200 T. x 13.8 oz.
MISC. EQUIP.: Surface Grinder • Slip Roll • Barfeed • Toolboxes • More
FINISHING EQUIPMENT: (2) Vibratory Deburrers • Electrovert Vapor Degreaser
Q.C. EQUIP.: Starrett C.M.M. • Mitutoyo 24” elect. ht gauge • Microscope
ROTARY SCREW AIR COMPRESSOR: Ingersoll Rand 15 HP w/receiver
DON’T MISS THIS SALE!!!
BUYER’S PREMIUM: 18%
INSPECTION: Monday, Nov. 17th, 9 A.M. to 4 P.M. or by appointment
AUCTIONEER: Ron Moore PA Lic. #AU005068 OPMI Lic# C8
PAYMENT TERMS: Cashiers Check, Wire Transfer OR Company Check with letter from bank guaranteeing payment to PMI.
farming division
20
industrial division
online ONLY AUCTION
Surplus To The Ongoing Needs of GE
13 locations throughout THE U.S. and Canada
Bidding Ends:
Tuesday, Nov. 18th • 2:00 (EST)
Inspection: Mon., Nov. 17th (by appointment only)
FEATURING:
MAZAK CNC TURNING & MILLING CENTERS
• CNC TURNING CENTERS • CNC VERTICAL
MACHINING CENTER • CNC MULTI-AXIS LASER
• (6) VTL'S • CMM'S • TOOLROOM MACHINERY
• ENVIROMENTAL TEST CHAMBERS •
www.bidspotter.com/forms/event.php?event=16035
FABRICATING EQUIPMENT • MISCELLANEOUS
SHOP EQUIPMENT • PLUS MUCH MORE!
Register To Bid Online At:
http://www.bidspotter.com/en-us/auction-catalogues/koster-industries/catalogue-id-bscko10136
Buyer’s Premium
Applies
For more information visit our website
www.kosterindustries.com
farming division
industrial division
21
Schneider
industries, inc.
250+
LOTS
Complete Investment Recovery Programs.
SMELTING PLANT CLOSED AFTER ONLY 2 MO. OF OPERATION. BID NOW!
Began: Wednesday, October 22nd • 8:00 AM (CDT)
Ends: Wednesday, December 10th • 5:00 PM (CDT)
Location: Inspection by Appointment, Sold First Come, First Served
Basis!, Set Up an Inspection Now! Winnipeg, MB [Canada]
(Qty. 36) Graphite Electrodes for Smelting, Electric Arc Furnace
Rated 6MW DC Submerged Arc Furnace, Electrical Transformers,
Square D Electrical Panels, Hoppers, Vib. Conveyors, Ladles, Valves,
Motors, Air Compressors and Plant Support Equipment,
Lots of Electrical & MCCs.
Visit Our Website for Full Inventory Listings:
www.schneiderind.com
http://www.bidspotter.com/forms/event.
php?event=22198
Schneider Industries
3010 Locust St., Suite 103 • St. Louis, MO 63103
Phone: 314-863-7711 • Fax: 314-534-0758
[email protected]
If you have or know of surplus assets, please give us a call for a no cost consultation
314-863-7711 or email [email protected]
farming division
22
industrial division
Live on the internet via:
farming division
Cincinnati Industrial Auctioneers, Inc.
www.cia-auction.com
513-241-9701
industrial division
23
farming division
24
industrial division
Live Onsite and Webcast Auction
Fiberglass Industries, Inc.
Wednesday, November 12th • 10:30 AM (EST)
INSPECTION: Tuesday, November 11th • 9 AM to 4 PM • Amsterdam, New York
Complete Closure of Fiberglass Manufacturing Facility, By Order of Fiberglass Industries, Inc.,
Including; Stainless Steel Mixing Tanks, Dietze & Schell Winders, Ovens, Boilers, Generators, Air Compressors, Lab Equipment, Vehicles,
Plant Support, Scrap Metal, etc.
FEATURED ITEMS
•(9) Dietze & Schell Direct Roving Winders Models:
DS330/2-2 & DS360/2-2 (New 2012
•Lantech Rotary Stretch Pallet Wrapper Q Series, S/N
QA003537, w/Weber Labeler System Model 5200
w/ Zebra #170PAX4 Label Head
•Caterpillar 500 KVA Prime Backup Generator, S/N
G6B01245 (New 2005), Approx. 450 Hours, Model
LC 6, Engine Model 3406, Cat Identification #:
CAT00000TC5G00606
•McQuay Chilling System Model WDC063MA, S/N
STNU081200062 (New 2009), w/Chilling Towers,
Circulation Pumps, Lakeside Water Treatment
System, Filter Tanks, Pumps and Meters
•Ingersoll Rand 200 HP Rotary Screw Air Compressor
Motdel IRN200H-2S, S/N NFF0563U08256, (New
2008)
•Reymsa Model HRFG812120, 1-Fan 20-HP Cooling
Tower, (New 2008), 20-HP Motor
•Ingersoll Rand 100 HP Rotary Screw Air Compressor
Model IRN100H-CC, S/N NV8962U10344 (New
2010)
•Reymsa Model HRFG812120, 1-Fan 20-HP Cooling
Tower, (New 2009), 20-HP Motor
•Reymsa Model HRFG816215, 2-Fan Cooling Tower,
(New 2008), 850-RPM Back Up Speed, 15-HP
Motor, 1,365-Gallon/Min
•York Shipley Generator/Boiler Model 560-SPH
175X-S150-N, S/N 07-21985 (New 2007),
6,000,000 BTU, Gas Fired
•Wabash Platen Press Model MIL-125-2424-6IM, 250
Ton, S/N 6943
•York Shipley Steam-Pak Generator/Boiler Model SPH175N-187382, S/N 81-114164-H-81675 (New
1981), 6,000,000 BTU, Gas Fired
•Instron Model 1125, 20,000-Lb. Load Cell Tensile
Tester, S/N 6619
•(15+) Stainless Steel Mixing Tanks, Various Sizes
•Taillift 5,000 Lb LPG Forklift Model 5G25C, S/N
410270, Triple Mast, Side Shift
•1991 Peterbilt 6 x 4 Diesel Truck Tractor, VIN:
1XP5DR9X2NN313087
•2006 Buick Model Lecerne Automobile, VIN:
1G4HP57266U177071, 160K Miles
•2007 Toyota Model Camry Automobile, VIN:
JTNBK46K173001441, 265K Miles
•2012 Ford Model Taurus Automobile, VIN:
1FAHP2EW0CG138422, 66K Miles
•2012 Ford Model Taurus SEL Automobile, VIN:
1FAHP2EW8CG126583, 52K Miles, Gold, Leather
• GREAT Scrap Metal Opportunity Tons of Scrap Items
& Scrap Metal Available!!
•Complete Laboratory - Maintenance Department
•Instron Model 3369, 50KN Load Cell Tensile Tester,
Material Handling Equipment, Batch Processing
•Morehouse Cowles Dissolver Model 2TV2045, Dual
S/N 67364
Shaft and Drive Dissolver, S/N LA800 (New 2008),
Equipment - Plant Support
•Hyster 5,000 Lb Forklift Model S50XL, S/N
with (1) 15-Hp.Motor, (1) 7.5-Hp. Motor and
http://www.bidspotter.com/en-us/auction-catalogues?ClientId=839d962a-1922-4693-a4eb-a28b012c118e
A187V15631K, Side Shift, Quad Mast
350-Gallon Stainless Steel Mixing
Powered by:
Online Auction - Internet Bidding Only
Metal Masters
www.bidspotter.com/forms/clientupcoming.php?clientname=132
Wednesday, November 19th •1:00 PM (EST)
New Haven, Connecticut
By Order of Metal Masters, Complete Plant Closure, Including: Press Brakes, Shears, Punch Presses,
CNC Machining & Turning Centers, Bending Rolls, Machine Tools, Welding Equipment, Material
Handling, Vehicles, Plant Support, etc.
FEATURED ITEMS
•Pacific 14’ X 200 Ton Press Brake Model K200-14, S/
N5446, 1/4" Cap.
•Aronson Welding Positioner Model HD10MTCR
•Pacific 10’ x 100 Ton Press Brake Model 100-10, S/N 1286,
Hydraulic
•Chicago Dries & Krump 6’ x 75 Ton Press Brake Model 46-C,
S/N L-13769
•Press & Shear Machinery Co. 10’ x ¼” Hydro Shear S/N
1014XBHA67576, FOBG
•Niagara 8’ x ¼” Power Squaring Shear, No. 896
•Whitney 50 Ton Punch Press Model 653-50, S/N 653-18530080
•W.A. Whitney CNC Turret Punch Press, Model Pulsa 620,
S/N P25284; 620-001-37798, 20-Station, Westinghouse
CNC Control, ¼” Cap.
•Eagle Bending Rolls Model CP-40, S/N 396
•Webb 6' X 8" Drop End Pinch Rolls Model R3LR-8006, S/N
7267, 3/8" Capacity
•Giddings & Lewis 4" Horizontal Boring Mill, Model 340-T, S/N •Supermax CNC Slant Bed Turning Center Model YCM-TC-2,
7372, W/ 96" Table, DRO
S/N 907088, Fanuc Series O-T Controls
•Sharnoa CNC Vertical Machining Center Model SDC 30-7.5,
S/N 850196, ATC, Tiger CNC Control
•Hyster 5000 lb. LPG Forklift Model H50J, S/N F003D03112E,
Pneumatic Tires, Triple Mast, Side Shifter
•Uni-Hyro Ironworker Model 50-15, S/N 3PE1413, 50 Ton
•Ford E350 Box Truck, 15' Box, Automatic
•International Stake Body Truck, Diesel, 20' Rack Body
http://www.bidspotter.com/en-us/auction-catalogues?ClientId=839d962a-1922-4693-a4eb-a28b012c118e
Buyer's Premium: 15%
REGISTRATION & BIDDING AT:
Powered by:
WWW.THOMASAUCTION.COM
Thomas Industries
Guilford, CT 06437
EMAIL: [email protected]
farming division
Auction License #AU481
industrial division
Phone: 203-458-0709
"Worldwide Auctions & Appraisals Since 1947"
25
As Appointed By The Trustee In Bankruptcy
Lakehead Marine & Industrial Inc.
Complete Shipyard Featuring Large Capacity Turning, Boring & Bending
401 Shipyard Road, Thunder Bay, Ontario, Canada
1 of 2 VBM’s
Swing 196.8"
Max 70.8" x 472.4"
1 of 13 Lathes
SCHIESS Vertical Boring Mill Model 2K 300/500
GEMINIS Engine Lathe Model GE-1400-S
6" Spindle
18' x 750 Ton
1 of 2 Boring Mills
ASQUITH 6" Floor Type Horizontal Boring Mill
PACIFIC Press Brake Model 750-18
Auction: Wednesday November 12, 10:00 AM (ET)
Bid Live Onsite
& Online Via
http://www.bidspotter.com/en-us/auction-catalogues/infinity-asset-solutions/catalogue-id-bscinf10113
Inspection: Tuesday November
11, 9 AM to 4 PM (Over 1,000 Lots!)
www.infinityassets.com
infinityassets.com 905.669.8893
AUCTIONS • LIQUIDATIONS • FINANCING • APPRAISALS
26
www.hilcoind.com
www.hilcoind.com
farming division
industrial division
PUBLIC AUCTION
SURPLUS TO THE ONGOING
OPERATIONS OF POHLMAN, INC.
Online Auction: Currently In Progress
Featured Items Include:
• Hydromats & Screw Machine
• Tunnel & Conveyor Type Parts Washers
• Inspection / CMM
• Gantry-Type Loading Robots
• Tool & Cutter Grinders
• CNC Machining Centers
• Barrel Dumper
• AC Motor (NIB)
• CNC Lathes
• Chip Conveyors
• Surface Grinders
And Much More!
Auction Hosted By:
Visit our website for more information
www.Atec-Inc.com
ATEC
Auctions • Appraisals • Asset Recovery
Phone: (314) 447-3200
farming division
industrial division
27
WEBCAST
& ONSITE
LATE MODEL STATE OF THE ART LARGE CAPACITY TURNING,
MACHINING AND GRINDING FACILITY EQUIPMENT
As New As 2008 Including Mori Seiki, Mazak, Toyoda
2 Available
2008
MAZAK Mazatech FH-8800 CNC Horizontal Machining Center
2007
TOYODA GE6P-106 II 22” x 62” CNC Cylindrical Grinder
2008
MAZAK Slant Turn 50N x 3000U “Big Bore” CNC Turning Center
2007
MAZAK Slant Turn 50N x 2000U CNC Turning Center
BARNARD MANUFACTURING
COMPANY, INC
TUESDAY,
NOV. 18TH 2014
10AM EST
Preview & Inspection:
Mon., Nov. 17 from 9am-4pm
or by appointment
2005 1492 WEST WALKER RD.
2007
MORI SEIKI NL-3000-1250 CNC Turning Center
SALE CONDUCTED BY
AUCTIONS
LIQUIDATIONS
APPRAISALS
MORI SEIKI Dura Center 5 CNC Vertical Machining Center
21700 Northwestern Hwy.
Suite 1180
Southfield, MI 48075
Tel: (248) 569-9781
www.maynards.com
ST. JOHNS, MICHIGAN
IN CONJUNCTION WITH
Place your bid now!
REGISTER AT
farming division
www.biditup.com
28
industrial division
UPON INSTRUCTIONS FROM SECURED CREDITORS
LARGE CAPACITY CNC & CONVENTIONAL MACHINING FACILITY
PUBLIC AUCTION
WEBCAST
& ONSITE
THURSDAY,
NOV. 20TH 2014
10AM EST
PREVIEW & INSPECTION:
WED, NOV. 19 FROM 9AM-4PM
OR BY PRIOR APPOINTMENT
2397 E. HURON RD.
AU GRES, MI
FADAL VMC 6535/30 CNC Vertical Machining Center
LUCAS 40T 4-Axis CNC Horizontal Rotary Table Boring Mill
Unable to Attend?
http://www.bidspotter.com/en-us/search-filter/auction-catalogues?ClientId=44ce8da7-7025-4958-b465-a29301344316
Bid in real time via the internet.
REGISTER AT: www.bidspotter.com
SALE CONDUCTED BY
farming division
AUCTIONS | LIQUIDATIONS |
industrial division
UNION 130/6 CNC Horizontal Rotary Table Boring Mill
21700 Northwestern Hwy.,
Suite 1180
Southfield MI 48075
Tel: (248) 569-9781
IN CONJUNCTION WITH
www.cia-auction.com
www.maynards.com www.biditup.com
www.biditup.com
www.cia-auction.com
APPRAISALS
www.maynards.com
29
HTE TOOLING INC. High Tech Tooling Mfr.
Owner Retiring
266 Rutherford Road South, Unit 20, Brampton, Ontario
Auction: Thursday Nov. 20, 11:00 AM (ET)
Bid Live Onsite For Complete Terms & Conditions,
& Online Via Removal Times and Directions, Please
Visit infinityassets.com For Details.
http://www.bidspotter.com/en-us/search-filter/auction-catalogues?ClientId=834073aa-521a-474e-be3f-a2890129daac
Inspection: Wednesday Nov. 19, 9am to 4pm or by appointment
Also Available By Private Treaty: Intellectual Property Including Name, Website Etc. And Patented Spatter Removal Tooling Technology
A U C T I O Nhttps://www.facebook.com/pages/Infinity-Asset-Solutions-Inc/238299922871609
S • L I Q U I D AT I O N S
Like us at: facebook.com/
Infinity-Asset-Solutions-Inc
FINANCING • APPRAISALS
905.669.8893
infinityassets.com
Follow us at: twitter.com/
https://twitter.com/InfinityAssets
farming division
InfinityAssets
30
industrial division
•• ONLINE ONLY AUCTION ••
Surplus to
Equipment moved for convenience:
4243 US Route 23 South
Piketon, OH 45661
Date: Bidding Closes Tuesday, December 9th
Inspection: Thursday, December 4th from 9:00 AM – 4:00 PM
POWER GENERATION & ELECTRICAL MACH’Y
•• HIGHLIGHTS: All NEW IN 2008 – NEVER INSTALLED ••
•(4) CAT SR48-GD 1230 kW/1537 kVA
Continuous
Diesel Generator Sets
MWR 10-17-14
•(2) CAT C27 725 kW/906 kVA Prime
Diesel Generator Set
•(6) Fire Guard 1000 – 2000 Gallon
Above Ground Fuel Tanks
•Lg. Qty. Diesel Fuel Transfer Pumps,
Motors, Filters, Cartridges, and more
•(16) GE 9T83C9874-Type QL General
Purpose Power Transformers
•CD Technologies UPS Battery
Chargers
•(10) Ass’t Flowserve Centrifugal
Pumps
•(8) WCR A891M Stainless Plate Heat
Exchangers
•1000s of ass’t Flowserve, Flowtek
& Crane Marwin actuator, butterfly,
globe and ball valves
• 1000+/- Copper Tubing & Fittings
• And Much More!
Huge Quantity Pipe Fittings including Ass’t Brass, Copper & Bronze Flanges, Covers, Tees,
Elbows, Nipples, Reducers, Check Valves, and More!
Can’t attend in person?
BID LIVE ONLINE AT:
TERMS: To be sold in accordance with CRG
Terms of Sale as published on Web and in Auction
Catalog. OH Lic # 2009000015
farming division
www.crgauction.com • (800) 300-6852
industrial division
31
UPON INSTRUCTIONS FROM THE OWNER
BRACE INDUSTRIES INC FABRICATION PLANT
WEBCAST
& ONSITE
PUBLIC AUCTION
TUES, NOV 18TH 2014 @ 10AM PST
PREVIEW & INSPECTION: Monday, November 17 from 9am-4pm or by appointment
7956 ALEXANDER ROAD • DELTA, BC
SCOTCHMAN 650 S Ironworker
HYD-MECH S-20 P Bandsaw
UNION 5’x8’ Plasma Burning System
2008
UNIVERSAL Brown Hydraulic Bender
HYSTER 5155XL Forklift
LIFTMASTER CPCD 30F Forklift
For More Information Contact: Mike Seibold (604) 675-2227 [email protected]
[email protected]
http://www.bidspotter.com/en-us/search-filter/auction-catalogues?ClientId=e50ad540-59b3-43e3-b0b3-a28b0101b1d4
1837 Main St.,
Vancouver, BC V5T 3B8
Tel: 604 676-6787 | Fax: 604 876-2678
AUCTIONS | LIQUIDATIONS | APPRAISALS
32
www.maynards.com
www.maynards.com
farming division
Unable to attend? BID LIVE, ON-LINE!
Register at www.bidspotter.com
industrial division
MUEBA KBL 1/2
Ironworker
CLARK CGP25 Forklift
HYSTER S80E Forklift
Radial Arm Drill
ADVANCE RF-45
Mill Drill
KANE & ROACH
Angle Rolls
MILLERMATIC 250
RIDGID 500 Threader
KING Sander
Hyd Shop Press
WALTER 10”
Combination Sander
VOEST DA 210/1 Lathe
EAGLE Air Compressor
CANOX CCP-300
Welder
NEW STEEL INVENTORY
IRONWORKERS / BANDSAW / COLD CUT SAW BENDER / RADIAL ARM DRILL /
• SCOTCHMAN 650S 65 Ton, 5hp, 2500 psi
MILL DRILL / LATHE / ROLLS
• MUEBA Universal Size KBL 1/2, 1-5/8 Punch, 3/4 x 3/4
• HYD-MECH S-20P 20” Metal Cutting Bandsaw, Auto
Coolant
• WALTER 10” Cold Cut Saw
• KALAMAZOO 12” Cold Cut Saw
PLASMA BURNING SYSTEM / WELDERS /
RELATED EQUIPMENT
• UNION CARBIDE/LINDE CM60 Plasma Trace Burning
System, HL-7 Linatrol Eye, Servo Drive, 5’ x 8’ Cap.,
Hyotherm, PowerMax 1100 Plasma Power Supply
• MILLER CP-250TS Welder w/ Millermatic 30E Wire Feed
• MILLER Millermatic 250 Welder
• MILLER Welder, 76/38/30 amp w/ Canox 24V Wire Feed
• MILLER Millermatic 300 Welder
• LINCOLN Ideal Arc R35 Welder w/ Wire Feed
• HOBART Mega-Flex 450 Welder w/ Wire Feed
• AIRCO Welder, 650 amp, DC/FC, w/ Miller Wire Feed
• LINCOLN V1-253 Welder w/ Wire Feed
• CANOX CCP-300 Welder
• MEMCO CV-451 Welder w/ Miller 60 Series Wire Feed
• HOBART 300 amp Welder w/ Cyclomatic Wire Feed
• GULLCO KR-200L-B Foot Operated Welding Roll Positioner
• WATTS Track Cutting System
• GULLCO Rod Oven
GENERAL EQUIPMENT
• SELFER ACE HISII-1624 Portable Hydraulic
UNIVERSAL Brown 40 Hydraulic Tube Bending System
Punch C-Frame w/ Mod. HPD-05 Pump
YODOGAWA YMR840 3’ Radial Arm Drill, 13-1500 RPM • KING 6” x 48” x 12” Disc Combination
ADVANCE RF-45 Mill Drill, 60-1250 RPM
Sander
VOEST DA 210/1 Engine Lathe, 1-3/4” Bore, 18” Swing, 5’ Bed • RIGID 500 Pipe Threader
KANE & ROACH 5hp Pyramid Rolls
• 6” x 26-1/2” 5hp Belt Sander
• 1995 KING 3/4” Drill Press w/ Bench Grinder
MOBILE EQUIPMENT
• Hydraulic Adjustable Shop Press, 10hp
• 2008 LIFTMASTER CPCD 30F Diesel, 6500lb Cap., 118”
• ENERPAC Tube Bender, Hydarulic/Electirc
Lift, 2 Stage Mast, s/s, Pneumatic Tires
• EAGLE Max Air C416OVI 5hp Air Compressor
• HYSTER S155XL 15,000lb Cap. Forklift, 134” Lift, 2 Stage
• (7) Mag Drills
Mast, s/s, Solid Tire
• HYSTER S80E 8000lb Cap. Forklift, 169.50” Lift, 2 Stage • Gravity Rollcases
• (30) Steel Sawhorses
Mast, s/s, Solid Tire
• CLARK CGP25 5000lb Cap. Forklift, 189” Lift, 3 Stage • Cut Off Saws
• Hand Tools and More
Mast, Pneumatic Tires, LPG
• Qty of 10’ and Over Steel Angle, Beam,
• AC 3000lb Cap. Forklift, 2 Stage Mast, Solid Tire, LPG
Plate and Pipe Inventory
• (3) Forklift Cherry Pickers, 1 Push Blade, Man Basket
•
•
•
•
•
TERMS & CONDITIONS | PAYMENT: 25% NON-REFUNDABLE DEPOSIT ON AWARD OF BID, BALANCE WITHIN 24 HOURS. PAYMENT IS CASH, CASHIER’S CHECK,
CERTIFIED CHECK, WIRE TRANSFER, COMPANY CHECK ONLY IF ACCOMPANIED BY A LETTER FROM YOUR BANK GUARANTEEING AMOUNT OF CHECK FOR DEPOSIT AND/OR
PAYMENT IN FULL. NO PERSONAL CHECKS. FULL PAYMENT MUST BE MADE BEFORE REMOVAL OF PURCHASE. REMOVAL: LAST DAY OF REMOVAL IS WEDNESDAY, NOVEMBER
21, 2014, AND AS FURTHER DEFINED IN THE SALE CATALOGUE, EVERYTHING IS SOLD “AS IS, WHERE IS”. ALL SALES FINAL. COST AND RESPONSIBILITY FOR REMOVAL OF
PURCHASE REMAINS WITH THE PURCHASER. EVERY EFFORT WILL BE MADE TO FACILITATE REMOVAL. WHILE QUANTITIES AND DESCRIPTIONS ARE BELIEVED TO BE ACCURATE,
THE AUCTIONEER, OWNERS OR COUNSEL MAKE NO WARRANTIES OR GUARANTEES EITHER EXPRESSED OR IMPLIED AS TO AUTHENTICITY, GENUINENESS OF, OR DEFECTS
IN ANY LOT AND WILL NOT BE HELD RESPONSIBLE FOR ANY ADVERTISING DISCREPANCIES OR INACCURACIES. NO WARRANTIES WHATSOEVER ARE MADE AS TO CONDITION,
MERCHANTABILITY OR FITNESS FOR USE OF ANY ITEM. MAY WE SUGGEST YOU TAKE FULL ADVANTAGE OF THE PREVIEW AND INSPECTION PERIOD. SALE SUBJECT TO
ADDITIONS, DELETIONS & PRIOR SALES. PLEASE CHECK AVAILABILITY OF EQUIPMENT. BUYERS PREMIUMS: 12% ON-SITE, 15% ON-LINE
For More Information Contact: Mike Seibold (604) 675-2227 [email protected]
or [email protected]
http://www.bidspotter.com/en-us/search-filter/auction-catalogues?ClientId=e50ad540-59b3-43e3-b0b3-a28b0101b1d4
1837 Main St.,
farming division
AUCTIONS | LIQUIDATIONS | APPRAISALS
industrial division
Vancouver, BC V5T 3B8
Tel: 604 676-6787 | Fax: 604 876-2678
www.maynards.com
www.maynards.com
Unable to attend? BID LIVE, ON-LINE!
Register at www.bidspotter.com
33
On-site and Online AUCTION
Sterling Machine Shop
4631 Milltown Road, Green Bay, WI 54313
Auction Date: Tuesday, November 18, • 10:00 AM SHARP!
Inspection Date: Monday, November 17 • 10:00 AM - 4:00 PM and Tuesday, November 18, from 8:00 AM - time of sale.
DIRECTIONS:Take I43 North Out Of Milwaukee. Take Exit 180 I172 W Toward A. Strabel/Airport. Continue Onto I172W. Take US 41N Toward
Marinette. Take Exit Toward I32N. Continue Onto I32N. Turn Right Onto Marley Road. Turn Right Onto Milltown Road. Watch For Auction Signs.
OFFICE Equipment (will be onsite only)
SHOP EQUIPMENT
(1980) Polamco Universal Milling Machine, Model FWA-41M • Hardinge Second Operation Lathe, Model DSM59, s/n
99/57, 1 hp • Clausing Engine Lathe, Model 5914, s/n 503273, 14” Swing x 40” Bed, Newall Topaz DRO, Steady Rest
• Peerless Vertical Band Saw, Model HVC-20, s/n 9-1118-11, IC Saw Blade Welder, 110V, 60 HZ • Famco Arbor Press,
Model 3 • American Broach & Machine Arbor Press, Hydraulic, Model 6 Ton, s/n 5674 • Enerpac Press, 10,000 PSI Max,
10 Ton MBC Welding Positioner, Model PB2, s/n 299, ½ HP, 200# Capacity • (2) Dewalt Electric 4-1/2” Angle Grinders
• Baldor Grinder Buffer, Model 612, s/n W382, 3600 RPM • Steel Welding Table, 68” x 68” • MHC Arbor Press, Model
1805-1010, 1 Ton Capacity • Miller Tig Runner, s/n LC17748, Miller Coolmate 3 Coolant Hypertherm Powermax 350
Plasma Cutter • Miller Extended Reach Ari Cooled Wire Feeder, s/n KF759750 • Miller DC Inverted Arc Welder, s/n
KG295413 w/Cart Hobart Welder, Model RC300, s/n 12RT-41587 • Miller Millermatic 135 115V Wire Welder, s/n
LE071854 • Welding Table, 4’ x 12’ w/6-1/4” Vise • Belt/Disc Sander On Cart • Misc. Cabinet w/Contents: Welding
Sticks, Belts, Grinding Discs, Etc. • Hobart Welder, Model RC250, s/n 12RT w/Miller 24V Constant Speed Wire Feeder
• Crown Walk Behind Forklift, Electric, Model 20MT, s/n 38080, 2,000# x 110”, Approx. 71 Hours • Pexto Power Squaring Sheer, Model V2720, s/n H2777-48, 14
Gauge Capacity, Soft Steel • Chicago Steel Banding Pan Brake, 4’, Model W31, s/n 59262 • Niagara 3 Roll Former, 42” x 14 Gauge Capacity Acetylene Cart/Torch
Set • Toledo Scale, Model 2020, s/n 16951, 200# Capacity Trinco Dry Blast Cabinet, 2 Hole, Model 36/bp, s/n 42439-5, Trinco BP2 Dry Blast • Bridgeport J Head
Vertical Milling Machine, s/n 12/BR-113476, Variable Speed, 9” x 42” T-Slot Table, Servo Type 150 Powerfeed, Coolant, 1-1/2 HP, Newall Topaz DRO, 14” x 30” •
Powermill Kondia Vertical Milling Machine, Model G, Asong AS235 Power Feed, Newall DRO, 14” x 30” • (6) Kurt 6” Vises • Chicago Parts Washer • Troyke Rotary
Index Table, Model BH15, s/n 17281 • Leland-Gifford 6 Head Gang Drill, No. 2 Multi-speed, Up To 1800 RPM, 21” x 78” Table • Brown & Sharpe Grinder, No. 1 •
Hardinge Lathe Second Operation, Model DV59 Central Machinery 8” Drill Press, Bench Type, s/n 1229030672 • (1994) Dainichi F15 CNC Lathe, s/n 26429, 3 Jaw
Chuck, 12 Position Automatic, 4” Hole Through, 15” x 20”, 10” x 23”L Swing Over Bed • Iemca VIP 80E Bar Feed, Type 16, s/n 020703QA03 • Daewoo Puma 10
CNC Lathe, s/n 200204, 3 Jaw Chuck, 12 Position ATC, Daewoo Fanuc Control (control needs work) • Detect Gram Scale, s/n 23F-4144 • bCincinnati Grinder, s/n
FU4E5PH-9, 67” Bed • Stone Cold Saw Bewo Cold Saw • DoAll Welder, Model DBW5, s/n 6493348, Pedestal Mount • Setco Industries Tool Grinder, Model SPL, s/n
85360, 1 hp, 10” Wheel • Boyar Schultz Surface Grinder, Model H612, 6” x 12” Permanent Magnetic Chuck • (1985) Morton KM-40-S Tool Grinder, s/n 3005, Brown
& Sharpe Permanent Magnetic Chuck, 3Speed Grinding Wheel • Black & Webster Black Diamond Tool Grinder, Model BW90A1V, s/n 27871, 3400 RPM, 1/3 HP • 6”
Carbide Grinder, Electric, ½ HP, Double End •Electric Grinder, Double End, Model JBG6A, s/n 405622, ½ HP, 1 PH, 60 Cycle, 115V, 3450 RPM • Sunnen Grinder, s/n
11347 • Pedestal Sander • Banding Cart w/Tooling • Electro Arc Tap Burner/Disintegrator, Model CON, s/n C3898, 120V, 20 AMP • (1953) Norton Surface Grinder,
s/n 287, 8” x 24” Permanent Magnetic Chuck • (1963) Cincinnati OD Grinder, 14” Swing x 96” Bed, Model 14L96, s/n 6P4H5M1 • South Bend Precision 14” Single
Spindle Drill Press, Bench Type, Model 14B3, s/n 0400B • Dewalt 7770 Lectrostop Radial Arm Drill, 10” Blade, Electric, s/n 79491053 • Di-Arco Punch, NO. 2, s/n
BB5393, Manual • Harding Speed Lathe, Model HSL59 • Porter Cable 8” Wet/Dry Belt Grinder, s/n 1411 • (1998) FMB Horizontal Band Saw, s/n 80940, Coolant,
24” x 12’8”, Stand w/Roller • Brobo Waldown Cold Saw, Model S350D, s/n E2141 w/Bench • Leblond Engine Lathe, Model Regal, s/n 7E2095, 3 Jaw Chuck, Tool
Positioner, 18” Swing x 72”, 2” Hole Through, Mitutoyo Linear Scale Counter • (1998) Dainichi CNC Lathe, Model DL65 x 300, s/n 28670, 3 Jaw Chuck, Positioner,
Tail Stock, 24” Swing x 118’, Fanuc Series 20T Control • Leblond Engine Lathe, s/n 8E2409, 3 Jaw Chuck, Positioner, Tail Stock, 16” Swing x 144” Leland & Gifford
4 Head Gang Drill, 12” x 57-1/2” Table, No. 2 Motor V Belt, Up To 1800 RPM • (2001) Hurco CNC Vertical Machining Center, Model VMX40, s/n Q6812, Ultimax
CNC Control • Union Boring Mill, s/n 3121-01, 28” x 36” Table, 2-1/2” Spindle, DRO • Devlieg Spiramatic Jig Mill, s/n 9267, 35” x 6” Table, 48” x 72”, Newall DRO
• Haas Servo Controller, 3 Jaw Chuck • Gap Bed Engine Lathe, s/n 1468, 16” Swing x 45”, 3 Jaw Chuck, Steady Rest, Tail Stock, Newall Sapphire DRO, Tooling •
Kearney & Trecker Horizontal Mill, 12”x 50” T-Slot Table • Hurco SM1 Vertical Milling Machine, s/n SDX8002124A, Variable Speed, 4,229 Hours, 12” x 42” T-Slot
Table • Baldor Dual End Grinder/Buffer, s/n 51186
Material Handling
Allis Chalmers Forklift Truck, LP Type, Model ACC30, s/n AJD9931, 2950# x 180”, 352 Hours, Solid Tires
Trailers/vehicles
(1999) Ford F150 XLT Pickup Truck, Extended Cab, 4x4, Triton V8 Gas Engine, Automatic, Cloth Interior
(2008) Mitsubishi Outlander SUV, AWD, 6 Cylinder, Automatic, Cloth Interior, 137,000 Miles, Vin no. JA4MT41X170Z012928
TERMS: No warranties or guarantees. Cash, Cashier’s Check or a Check Only With A Bank Letter Guaranteeing Your Check.
No Credit Cards. 12% Buyer’s Fee Onsite & 15% Buyer’s Fee Online.
Registered Wisconsin Auctioneers 27-53
David Gerlach-Registered Wisconsin Auctioneer 144
Michael Gerlach- Registered Wisconsin Auctioneer 1347/Kevin Hough- Registered Wisconsin Auctioneer 1212
Patricia Fox- Registered Wisconsin Auctioneer 2123/Connie Hudziak Registered Wisconsin Auctioneer 2122
GERLACH COMPANIES
139 E. Capitol Drive, Hartland, WI 53029
262-367-4950
farming division
WI Registration No’s 144, 1347, 1212, 2123, 2122 & 186-052
For more information visit our website @ www.gerlachauctions.com
34
industrial division
loeb
online auction
Koenig Machine, Inc.
winternitz
5531 Playbird Road, Sheboygan, WI 53083
inDustrial auctioneers
DATE: Wednesday, December 3rd
TIME: Lots begin closing 10am CST
INSP: Tuesday, December 2nd
from 9am-4pm CST or earlier by appt.
https://www.proxibid.com/asp/Catalog.asp?aid=66038
•MightyUSAViper
VMC-2100CNCVertical
MachiningCenter(2007)
•MightyUSAViperVMC1270APCNCVertical
•HwacheonHi-Tech700
CNCTurningCenter(2006)
BigCapacity!
•HwacheonHi-Tech200C
•HwacheonHi-Eco45CNC
TurningCenter(1999)
•ColdSaws&Lathes
•HwacheonHi-Tech200A
•HwacheonHi-Eco31ACNC
TurningCenter
•HwacheonHi-Eco21HS
CNCTurningCenter
•ExcelQMC-10Vertical
•ExcelCE-13&PMC-10T24
VerticalMachiningCenters
•ThermwoodC408-Head
CNCVerticalRouter
•MiterSaws,Grinders&
Welders
•MarvelSpartanPA133EPCHydraulicAutomatic
Horiz.BandSaw(2011)
•1999GMCC6500Box
BodyTruck
•2005FordLCFStakeBed
DumpTruck
•2006DodgeGrand
CaravanMini-Van
•2003DodgeRam15o0
Pick-upTruckwithNewer
Motor&Trans,Topper
•VerticalMillingMachines
&DrillPresses
•LargeQTYMachine
Accessories&Attachments
•LargeQTYSteelInv.&
ScrapInventory
•ForkLifts&360degree
JibCrane
•LargeQTYCarbideInserts
&PerishableTooling
•InspectionEquipment&
Tooling
•AirCompressors&Dryers
•LargeQuantityofMisc.!!!
•RealEstateAvailable!!
Well Maintained Precision CNC Shop - Equipment as New as 2012!!!
Real Estate Available
For Sale:
9,000 sq.ft. Light Mfg/Shop/Office
Building on 1.29 Acres, Ample Power
Real Estate Information:
Paul Gottsacker • (920) 453-9600
Complete Lot List Including Descriptions & Photos Available Online at ProxiBid.com
Complete Terms of Sale are available online.15% BP. For more information, call (877) 886-0440 • (773) 548-4131 or email [email protected]
www.loebwinternitz.com
www.bidspotter.com
Charles J. Winternitz • [email protected]
Auctioneer’s License 189-52
farming division
(773) 548-4131
loebwinternitz.com
[email protected]
[email protected]
A subsidiary of
www.loebwinternitz.com
industrial division
35
auctions
Click Here
to Visit the
Auction Calendar
36

IMT MEA_11062014 - MyEquipAuctions.com

Transcription

Similar documents

Auction Brochure - Thomas Industries

here to Print - Bristol Bronze

Houston, TX - Ritchie Bros. Auctioneers

Auction Brochure - Thomas Industries

Birmingham Hydraulics Inc. – Online Auction via BidSpotter http

View Auction Brochure