2014 HTT Project Reference List

HiTemp Tech Corp
14 Sandra Rd, Ringoes, NJ 08551
908-500-7500
[email protected]
www.thermcat.net
Rotary Kilns and Solid Waste Incineration Systems
Loro EnviroPower – Trivandrum, India, (3) Rotary Kiln Gasifiers and Dryers.
Dr Barry Liss 954-366-5556
Dr Neil Williams 954-993-2600
Designed a 150 TPD of MSW to operate in a WTE facilities. System was
designed to process various materials from RDF. System will be operational in
late 2014. HTT duties included project evaluation, permitting assistance, site
installation interactions and discussions with local, regional and nationally
relevant personnel. HTT has designed and will assist in the installation of the
system and assisted in training on-site personnel. The system afterburner was
designed to operate at 2000 Fahrenheit with a 1 second residence time. Main
chamber was 504 in x 96 in dia x 76 in ID and included a fully hinged access
interface door and screw hopper using an AC VFD drive motor system.
Aliron Corp, Calamba, Laguna, Republic of the Philippines
LIQUID AND SOLID WASTE HAZMAT FACILITIES
50 TPD Hazmat, System was complete with feed material sorting, conveyor
system, feed screw, Main chamber designed for 2000F operation, dump stack
valve, wet ash discharge, dry cyclone, quencher, scrubber, baghouse, and main
exhaust fan and stack. Currently under site construction
HTT designed one of the largest liquid and solid waste Hazmat Facilities in the
the Philippines. System was designed to process various materials from
chemical and production plants. System was operational in mid 2004. Duties
included project evaluation, permitting assistance, strategy interactions and
discussions with local, regional and nationally relevant personnel. Subsequently
designed and installed the system and assisted in training on-site personnel. The
main chamber is 96” dia x 480” long.
The system afterburner was designed to operate at 2200 Fahrenheit with a 2
second residence time. The afterburner chamber was 390 in x 120 in dia x 72 in
ID and included a fully hinged loading interface door. The feed system is a dual
and screw hopper using a dc drive motor system, and the feed screw system
was designed on rails for loading.
Mr. Nic Lazaro Philippines - +63 917 843 7352
Mr. Ron Grow, 301 229 2605 x105
Kentex International & Engineering Corp - 2006
50 TPD Hazmat Rotary Kiln, Taiwan Petro China 2004. System was complete
with feed material sorting, conveyor system, feed screw, Main chamber designed
for 2200F operation, dump stack valve, wet ash discharge, dry cyclone,
quencher, scrubber, baghouse, and main exhaust fan and stack.
Mr. George
TEL: +88 6-2-26981577
Cell +86 159 2125 997
[email protected]
[email protected]
Kentex Int - Petro China, Chengdu, China - 2011
50 TPD Hazmat
The system was designed for Petro China in Chengdu.
System is complete with feed material sorting, conveyor system, feed screw,
Main chamber designed for 2000F operation, dump stack valve, wet ash
discharge, dry cyclone, quencher, scrubber, baghouse, and main exhaust fan
and stack. Main chamber and major components were built in New Jersey.
Currently under site construction
Mr. George
TEL: +88 6-2-26981577
Cell +86 159 2125 997
[email protected]
[email protected]
TUCSON METAL, Tucson, AR 85713 - ROTARY KILN
520-884-1554, Mr. Steve Kippur
The Rotary Kiln was used located in El Paso, Tx. System was used to burn 500
LB/hr of drugs and misc confiscated materials. The Rotary Kiln was manual feed
because of the many types of things that needed to be destroyed. System was
used by the DEA, US Dept. of Immigration, and the FBI.
Hi-Temp Specialty Metals, Yaphank, NY – 2011
Rotary Kiln Tantalum oxidizing furnace - Mr. John J Gurule, Yaphank, NY 11980
Ph: 631-775-8750
Process Furnaces
Environmental Process Systems, Wheeling WV - 1991
PCB PROCESSING PLANTDesigned and built the largest PCB Process Furnace in the US. Personally
designed one of the one of the largest liquid and solid waste PCB processing
plants in the US. The system was installed for Environmental Protection Services
in Wheeling, WV. Duties included repair and modifications of their existing
equipment, project evaluation, strategy interactions and discussions with relevant
personnel. Subsequently designed and installed the system and assisted in
training on-site personnel. The system afterburner was designed to operate at
2200 Fahrenheit with a 2 second residence time. Main chamber was 24’ x 12’ x
14’ ID (LWH) and included a full width double hinge door with pneumatic seals,
tank car design where entire floor of furnace (12’ x 24’) is a moving hearth using
a dc drive motor system on rails.
Metallic Corp, Greensville, NC - 2006
DUAL PROCESS FURNACE - 252-413-0246, John Santos
Personally designed and built one of the one of the largest Dual Chamber liquid
and solid waste precious metal processing plants in the US. The system was
installed for Metallix Corp, Greenville, NC. Duties included project evaluation,
strategy interactions and discussions with relevant personnel. Subsequently
designed and installed the system and assisted in training on-site personnel.
The system afterburner was designed to operate at 2200 Fahrenheit with a 2
second residence time. Main chamber was 24’ x 12’ x 14’ ID (LWH) and included
a full width double hinge door with pneumatic seals, tank car design where entire
floor of furnace (12’ x 24’) is a moving hearth using a dc drive motor system on
rails.
VANGUARD RESEARCH, S. Plainfield, NJ 07080 – 1988/2005
3 Process Furnaces
HTT installed a Rotary Kiln Process dryer in 2001 at Vanguard Research. We
installed a thermal reduction system with a single afterburner, made by HITEMP
TECH for processing low and high BTU solid waste (3,000 - 18,000 BTU/lb). The
systems included primary and secondary chambers, natural gas burners, gas
mixing carburetor, moving hearth, refractory lined stack, venturi, packed tower
scrubber, induced draft fan, baghouse, and Nema 4 controls. The system was
designed using a PLC with touch panel control and monitoring system for
interfacing with the scrubber. Systems were each designed for 3 MM BTU/hr
heat release or 500 lb/hr design. We also installed a 300 lb/hr rotary kiln dryer
system using natural gas for drying sludge. Exhaust was also ducted into the
scrubber/baghouse.
Nasreya Center - Hazardous Waste Disposal – Alexandria Egypt
Deif Soliman, +20 122 442 6579
Designed, fabricated, installed on site a Hazardous Solid Waste
incineration system. System was shipped in a Sealand Container.
Site prep included setting the system on pad, erection, piping, wiring,
startup, and operator training.
United Precious Metal Refining, Inc., Alden, NY – 2004/2008
Mr Ajit, 716-683-8334
(2) Process furnaces for precious metal recovery. During the summers of 2005
and 2008 we installed 2 thermal reduction systems, made by HITEMP TECH for
processing low and high BTU solid waste (3,000 -18,000 BTU/lb) . The systems
included primary and secondary chambers, natural gas burners, gas mixing
carburetor, moving hearth with VFD motor control, refractory lined stack, and
Nema 4 controls. Systems were designed for 6 MM BTU/hr heat release or 1000
lb/hr design. The systems are currently operating near Buffalo NY.
JENSEN INDUSTRIES, N. Haven, CT 06473
Precious Metal Process Furnace
CNS Products, Bayonne NJ 07002
Production furnace for food processing
Fuller Company, Bethlehem, PA 18017-2188
Annealing Furnace
MSW INCINERATION SYSTEMS
Ft. Knox Army Base - 1984
50 TPD MUNICIPAL SOLID WASTE INCINERATOR
Sales, design and fabrication of 50 TPD municipal solid waste incinerators
installed at the Ft. Knox Army Base in Kentucky in 1981. The system consisted of
a specialized dual primary, single afterburner system with heat recovery boiler
and stack. The completed system was capable of handling 50 tons of solid waste
per day. Closed
Mayport Naval Station in Jacksonville, Florida - 1982
25 TPD MUNICIPAL SOLID WASTE INCINERATOR
Provided technical assistance and participated in the installation of a solid waste
incinerator at the Mayport Naval Station in Jacksonville, Florida. Equipment in
the system included a stepped hearth solid waste incinerator with a water quench
ash separation dropout chamber, a one-second afterburner and later, a heat
recovery boiler was added. The completed system was installed in 1980 and is
designed to handle 25 tons of solid waste per day. Closed
Engelhard, Carteret, NJ - 1981
MSW ROTARY KILN
Oversaw the design, manufacturing and installation of a rotary kiln incinerator at
Engelhard, Carteret, NJ. The system was comprised of a 300 lb/hour solid waste
manually fed rotary kiln, afterburner, heat recovery boiler, baghouse, and packed
tower scrubber. Closed
Vint Hill Farms-US Army, Warrenton, VA - 2001
Designed and Overseen the Rebuild of the document Incineration System,
GEOMET Technologies, Germantown, MD - 2001
Design and Consulting, Mad Cow Rotary Kiln Incineration System
MERG - Maryland Env Restoration Group, Charlotte, NC 28205
Rebuild Hot oil Rotary Screw Dryer for Soil
Enclosed Flare
Abdullah A.M. Al Khodari, AL KHOBAR, SAUDI ARABIA,
700 CFM CH4 from Dammam Landfill. The Fabrication Site was Al-Khodari
Heavy Industies. Serop Jolihjian – Prod Mgr (03) 843 1891 (3) 8431838
BROWNFIELD ASSOC., Belmar, NJ 07719
300 CFM CH4 from Charleston, VA Landfill, currently operated by Environmental
Standards, Charlottesville, VA 22902. 610-869-3322, Andrew Riggs
City of Linden, NJ - OP-TECH, Edison, NJ 08837
500 CFM CH4 Landfill, Icon Eng, 908 415 3444 Jenna
Carteret, NJ – Enclosed Flare Landfill Gases
SESI, NJ Mr. Fuad Dahan, PhD, PE 973 808 0633
500 CFM CH4 from Landfill Gases
EDISON NJ LANDFILL – Enclosed Flare
Iron Hill Construction Management - Mr. Jacob Smith 1)610.332.0550
Thermal Oxidizers
ABB LUMMUS GLOBAL, Bloomfield, NJ 07003, Mr. Marvin Greene, 973-8932747 /2000 fax, 1000 SCFM, thermal oxidizer with direct chemical vapor injection
burner system.
AKZO NOBEL CHEM INC, McCook, IL 60525
Thermal Oxidizer Package with HCL Scrubber, Ray Chu, 914-674-5354
AKZO NOBEL - FORTAFIL FIBERS, Rockwood, TN 37854
(4) 200 CFM TO
CROLL REYNOLDS, Westfield, NJ 07091
(4) 2000 SCFM TO for Carbon Bed Regeneration – Photo Circuits Corp
FERRO CORP - Transelco Division, Penn Yan, NY 14527
1500 CFM
FILTRATION SPECIALTIES, Mr. Mike Swink, Taunton, Mass, 508-880-9556,
6,000 SCFM, Thermal Oxidizer for coating system
GAF – ELK Corporation, Quakertown, PA 18951
3000 CFM TO
Gasbarre Products, Inc., St Marys, PA
3000 CFM TO
15857
HARPER FURNACE, INTL, Lancaster, NY 14087
TO for testing furnace emissions.
Johnson and Johnson, JNJ, East Windsor, NJ 08520
(4) 300 CFM TO
Main Line Coffee Roasters, Yeadon, PA
300 CFM TO
La Colombe Coffee, Philadelphia, PA 19134
300 CFM TO
Finite Industries, Carlstadt, NJ
6000 CFM Catox
New Harmony Coffee, Philadelphia, PA 19106
300 CFM TO
Norton Company - RAAM-PLEX – St Gobain, Worcester MA 01615
(3) 500 CFM TO and (1) 1000 CFM Catox
PHOTO CIRCUITS, at their locations in Peachtree, GA and Glen Cove, LI, NY,
516-674-1054, Brett Miller, 4 Thermal oxidizers for burning VOC from process
exhaust. Systems are designed for 1800F operating temperatures at a flow rate
of 3000 SCFM.
REM, Branchville, NJ 07826
300 CFM TO
UNION CARBIDE CORPORATION, Bound Brook, NJ 08805
500 CFM TO with Scrubber
WEETABIX CO. INC, Clinton, MA 01510
6000 CFM TO
ZeroPoint Clean tech Inc, Pottsdams, NY 13676
3000 SCFM TO
Catalytic Oxidizers
Abel Sanitary & Environmental Services, Inc.Andover, NJ 07821
500 SCFM Catox, Gas fired
Bristol Meyers Squib, Princeton, NJ
Turbine exhaust Catalyst
COATS AMERICA, Bristol, RI 02809
5000 SCFM Catox
Enviro-Equipment, Inc. ,Pineville N.C. 28134
(4) Catox for Chemical and SVE
Sandoz EON Labs, Inc. Wilson, NC 27893
3000 SCFM Catox with Scrubber, Mr. Kym London, Wilson, NC, 252-245-2200
US FUGI ELECTRIC, Piscataway, NJ 08854
3000 CFM Catox
Fort Hood, TX 76544
3000 CFM Catox
Geneva Pharmaceuticals, Dayton, NJ 08810
8,000 CFM Catox
Groundwater & Environmental Services, Inc, Crofton, MD 21114
HTT 100FM-CAT-HR-E
Ground/Water Treatment & Technology, Inc., Denville, NJ 07834
(4) Catox 973-983-0901, Bob Kunzel
H2M Associates, Inc., Totowa, NJ 07512
Rebuild of Catox System
HOWELL HYDROCARBONS, Channelview, TX 77530-0421
1000 CFM Catox
Killam Associates, Milburn, NJ 07041
300 CFM Catox
MSE Technology Applications, Butte, MT 59701
3000 CFM Catox
Hatch Mott MacDonald, Millburn, NJ 07041
(2) Catox repair
SANDOZ PHARMACEUTICALS
3,000 SCFM Catalytic Oxidizer with 70% preheat exchanger. Mr John
Counterman, East Hanover, NJ‎ (973) 503-7500‎
SPECIFIED FUELS & CHEMICALS-HALTERMAN CO, Channelview, TX 775300421, Chem processing, 1500 CFM Catox, 281-457-2768, Jeff Gamez
HANDEX CONSULTING, Monroe Twp, NJ 08831
(2) Catox
Honda Motors 700 SCFM Gas fired Catalytic Oxidizer with integral Preheat
Exchanger.System was installed near Manilla Philippines. Handles vapors
generated in the painting operation.
HONEYWELL INT'L (Fram Filter), Clearfield, Utah 84016
(4) Catox
Mark Litho, Clifton, NJ 07014
3000 CFM Catox, Charles Tumminello, Cedar Knolls, NJ, 973-538-5557
PLYMOUTH RUBBER CO, Canton, MA 02021
5000 CFM Catox
RAMSEY DESIGN GROUP, Ramsey, NJ 07446-1288
3000 CFM Catox
Scapa Tape, Carlstadt, NJ
6000 CFM Catox
Schrader Environmental Services, Inc., Ithaca, Michigan 48847
(2) 300 CFM Catox
SECOR, Las Vegas, NV 89120
200 CFM Catox
Shield Environmental Assoc., Lexington, KY 40509
350 CFM Catox
TARA TAPE, Fairless Hills, PA 19030
3000 CFM Catox
Textiles Coated Int., Manchester, NH 03103
3000 CFM Catox
Velsicol Eesti AS, Uus Tehase 8, 30328 Kohtla-Jarve. Estonia
1000 CFM Catox
PRECISION CASTPARTS, Portland, OR 97206-0898, 503-777-8173
12,000 CFM Catox
TOKICO USA INC, Dearborn, MI 48120
25,000 SCFM Catox
SOIL VAPOR EXTRACTION SYSTEMS 34 Gas and Electric Catox
and Thermal oxidizers Systems for SVE