horses

Transcription

horses
STABLE
PUSH ASIDE YOUR WORK
Mucking out is easier with our moveable separation walls.
You are just a few simple steps away from turning multiple individual
stables into one large space to clear. Working in the stables can get so
much quicker – and so easily!
6
FACILITIES FOR HORSES
Planning Examples8
Classic Horse Stables14
Luxury Horse Stables28
Separation Walls32
Stable Windows and Doors40
Stable Entrance Doors48
Paddocks54
Feeding Grids62
Tube Connectors66
Rubber Mats70
Did you know?
In our online shop, you can order any of these articles in a
few clicks. Visit our website at www.growi.de!
`` MADE IN GERMANY – PERFECT!
PAGE 3
`` STABLE WINDOWS AND DOORS
PAGE 40
`` PLANNING DIMENSIONS FOR HORSE STABLES
PAGE 8
7
FACILITIES FOR HORSES
INDIVIDUAL STABLES WITH AN OUTDOOR PADDOCK
Stable aisle
At least 2.5 m wide (3 m if there are stables on each side)
At least 16 m2
At least 12 m2
At least 11 m2
At least 8 m2
Individual stable for:
- A mares with a foal
- Stallions
Individual stable for:
- S tud horses
Individual stable for:
- Large horses
Individual stable for:
- Ponies
Outdoor paddock
Outdoor paddock
Outdoor paddock
When keeping horses in individual stables, it is essential
that they have opportunities for social contact with
members of their fellow species Horses also need the
opportunity to investigate or observe their surroundings.
This can be achieved by providing the relevant structural
facilities, such as small run enclosures that are permanently
accessible, external hatches or, as a minimum, stable doors
that can be half opened. Each individual enclosure must
be designed in such a way as to at least allow the horses to
see, hear and smell one another.
8
Outdoor paddock
Separation walls that are highly closed off should only
be installed in exceptional cases (e.g. stables for clinical
or quarantine use and foaling stalls). Even in these cases,
it is important the horses can still see, smell and hear at
least one other horse. When assigning horses to individual
stables, it is important to ensure that horses that don’t get
along are not housed next to each other. The hallmarks
of horses not getting along include regular aggression
towards the horse in the neighbouring stable, or kicking
against the separation wall.
Minimum dimensions for individual enclosures,
examples for 3 withers heights
Withers heights
1.30 m 1.48 m
1.68 m
Stable area for individual horse
Stable area for a mare with a foal
Minimum length for the shortest side of the stable
Height of separation wall with retrofitted grid
Height of external stable doors or sliding doors
Height of the lower half of an external stable door
Area for small roaming enclosure
6.76 m2
8.94 m2
2.28 m
1.69 m
1.82 m
1.04 m
6.76 m2
11.29 m2
14.93 m2
2.94 m
2.18 m
2.20 m
1.34 m
11.29 m2
8.76 m2
11.59 m2
2.59 m
1.92 m
2.07 m
1.18 m
8.76 m2
PLANNING EXAMPLES
GROUP HOUSING ENCLOSURE
Open stable (3.5 x 7 m) for group
housing of approximately three
horses with roaming area (12 x 12
m)
At least 16 m2 per pony
At least 22 m2 per large
horse
Rest area
At least 7 m2 per pony
At least 9 m2 per large
horse
In principle, all horses should suit group housing – regardless of their age, breed, sex or type of use. For group
housing, the person responsible for housing the horses
must be highly qualified (with knowledge of and the ability to discern horse behaviour). It also calls for professional
management and the husbandry methods must be properly organised. The group housing of horses also presents
constraints compared to natural conditions (restricted
space, limited alternative options). For this reason, ensuring
that all the horses in a group can satisfy their basic needs is
especially challenging with this kind of husbandry.
The following prerequisites must be met for group housing:
Gradual integration of new horses into an existing group.
Option for separating individual animals or sub-groups.
Careful observation of changes in the group’s hierarchy
and of the welfare of the horses in order to implement any
measures required in a timely manner. Removing horses
from the group if, even after some time, it has not been
possible to integrate them. Adhering to the standard
dimensions and the functional dimensions. No dead-ends
or sharp corners anywhere in the horse enclosure.
Minimum dimensions for group housing,
examples given for 3 withers heights
Withers heights
1.30 m 1.48 m
1.68 m
Rest area per horse in enclosed free-stall housing (no roaming)
Rest area per horse in multiple outdoor free-stall housing
with roaming area
Length of feeding stall
Height of separating wall for the feeding stalls
6.76 m2
8.76 m2
11.29 m2
5.07 m2
6.57 m2
8.47 m2
2.34 m
1.69 m
2.66 m
1.92 m
3.02 m
2.18 m
9
FACILITIES FOR HORSES
A WIDE RANGE
From functional to elegant – the choice is yours.
With Growi®, you can create a stylish, trend-setting
stable or simply one that is practical.
10
HORSE STABLES
CLASSIC
Model AKERA
Model BUCHELA
Model SWING
Model EVANDO
Model DORINO
Model NABILA
Model CINTARO
Model KALITA
Model FAANA
Model ELEGIA
Model WALINA
System GALENO
LUXURY
Model BELAMIE
Model NANDO
11
HORSE STABLES
HIGH QUALITY IN EVERY LAST DETAIL
There’s nothing more important to us than the comfort and safety of
your horses. That’s why every horse stable that Growi® builds completely adheres to the German National Equestrian Federation (FN)
regulations, which are intended to help you with species-appropriate
horse husbandry.
Growi® is committed to ensuring safety in every last detail. From the
thickness of the boards we manufacture and the spacing of our grids,
right through to the height of our troughs – when we create your stable, we diligently implement every specification and every idea that
can further improve the safety of horse stables. This means that you
can rely on us to provide you with precision-fitted, robust enclosures.
There are no corners, edges or eyelets in sight and the materials we
use, such as our range of untreated hardwoods, minimise the levels of
harmful chemicals in the stables.
Square tube, 50 x 50 mm
Grid bar, 3/4" tube
50 mm spacing between grid bars
Concealed welding seams
50 x 40 mm U-profile
Wood panelling, 38 mm thick
BESPOKE PLANNING
Every stable is different. Is your stable geared towards those who ride
as a sporting pursuit or as a leisure pursuit? Is it a newly-built facility or
an old dairy barn being converted into a stable for sport horses? In any
case, it’s a job for the experts. Growi® provides you with a range of options so that you can set up your stable in a way that meets your expectations of a well-organised, efficient use of space. From the dimensions
right through to the design, we can offer you plenty of scope for ideas.
GALENO is a very flexible and quick option – a practical way of installing safe stable facilities. Once we have quickly and precisely adapted
the prefabricated components, the horse stable will be ready for you.
12
INFORMATION
RECOMMENDED STANDARD DIMENSIONS FOR HORSE STABLES (WITHERS HEIGHT = WH)
Ceiling clearance:1.5 x WH
Stable area for individual horse:
(2 x WH)²
Stable area for a mare with a foal:
(2.3 x WH)²
Height of feed trough (base plate):
0.33 x WH
Height of watering unit (water level):
0.3 x WH
WH
Dimensions for average-sized horses (WH=1.68 m):
The stable area is approx. 11 m². The short side of the stable is at least 3 m long.
The base of the trough is approx. 550 mm from the ground. Paddock area: approx.
11 m²
Dimensions for average-sized ponies (WH=1.40 m):
The stable area is approx. 8 m². The short side of the stable is at least 2.5 m long.
The base of the trough is approx. 450 mm from the ground. Paddock area: approx.
8 m²
In accordance with the guidelines set by the German Federal Ministry of Agriculture, vertical tubes should have an external diameter of at least 3/4". The wooden
planks should be at least 38 mm thick.
Width of stable aisle:
2.50 m for fully enclosed front walls e.g. Growi® Dorino
3.00 m for half-height front walls e.g. Growi® Akera
WOOD
The recess in the bottom U-profile rail has a width of 20 cm. The wooden planks are
inserted into this recess and pushed into the frame. Finally, a cover plate is added to
secure the recess. On request, the wood can be delivered with vent slots.
Douglas fir, bamboo and Ekki wood are extremely sturdy natural products. Animals
that live in stables often bite and play with the boards, which can cause damage.
Wood also darkens over time. Deviations from the indicated colour and irregularities in colour and shape are due to the material and do not constitute a deficiency
in quality. Furthermore, warping, shrinkage, darkening, or similar occurrences do
not impair the strength and utility of the wood. On request, we can also deliver profiled boards made of plastic.
It is natural for shrinkage to occur in wood because it has a high moisture content
at delivery. After a period of time, the planks must be re-tensioned. We therefore
recommend that you purchase several extra boards.
Bamboo brown/coffee
Ekki wood
Douglas fir
Denya wood
Recycled plastic planks,
brown
Recycled plastic planks, grey
Recycled plastic planks, green
13
CLASSIC HORSE STABLES
Image above: Akera front walls with Douglas fir panelling. Image below: Buchela front walls, hot-dip galvanised with Ekki wood panelling.
14
AKERA & BUCHELA
PLEASANT VIEWS
The side elements of the Growi® Akera horse stable have a height of 2200 mm, elegantly sloping down to 1400 mm.
The front wall of the Buchela model sweeps down to a height of 1600 mm. The frame of the stall element consists
of 50 x 50 x 3 mm square tube and 50 x 40 x 4 mm U-profile iron. The vertical bars of this element are made of 3/4"
tube. There are visible weld joints where the bars are welded to a 1 1/2" tube and the clearance between each bar
is 50 mm. The wood panelling has a height of 1200 mm and a thickness of 38 mm. It is delivered with tongue and
groove.
MODEL AKERA
The Akera horse stable from Growi®
consists of a sloped front wall with a halfheight hinged door. Includes an eyebolt
lock and a kickover latch.
Douglas fir
Width of 2510–3000 mm
Width of 3010–3500 mm
Width of 3510–4000 mm
No.
1505
1506
1507
Ekki
Width of 2510–3000 mm
Width of 3010–3500 mm
Width of 3510–4000 mm
1508
1509
1510
Bamboo
Surcharge to the price for Ekki, per stall element
1549
Recycled plastic planks
Surcharge to the price for Ekki, per stall element
1559
Additional elements
Brass ball Ø 110 mm
Powder coating of the front wall, per m2
Wood panelling with vent slots, per metre
MODEL BUCHELA
The Buchela horse stable from Growi®
consists of a sloped front wall with a
half-height, bow-shaped hinged door.
Includes an eyebolt lock and a kickover
latch.
1548
700132
1484
Douglas fir
Width of 2510–3000 mm
Width of 3010–3500 mm
Width of 3510–4000 mm
No.
1800
1801
1802
Ekki
Width of 2510–3000 mm
Width of 3010–3500 mm
Width of 3510–4000 mm
1803
1804
1805
Bamboo
Surcharge to the price for Ekki, per stall element
1549
Recycled plastic planks
Surcharge to the price for Ekki, per stall element
1559
Additional elements
Brass ball Ø 110 mm
Powder coating of the front wall, per m2
Wood panelling with vent slots, per metre
1548
700132
1484
15
CLASSIC HORSE STABLES
Swing front walls, hot-dip galvanised with Ekki wood panelling and vent slots. Image on the right: Swing front walls with a luxury finish
IN FULL SWING
These ‘Swing’ front walls from Growi® offer an attractive alternative for your equestrian facilities, adding that certain
something. The front wall has a centrally positioned hinged door that is mounted on two round tubular columns. The
half-height, curved shape of the hinged door lets the horses keep watch over the stable aisle. Growi® horse stables are
circumferentially welded and the vertical tubes have a diameter of 26.9 mm (3/4"). The 102 mm round tubular columns
each have a floor plate at the bottom for anchoring and a steel ball welded on at the top. A secure Growi double-throw
bolt makes it easy to open and close the door. For the wood panelling, you can choose between the tried-and-tested
recycled plastic planks, Douglas fir, bamboo or Ekki wood. All of the panels have a thickness of 38 mm.
16
SWING
MODEL SWING
The Swing horse stable from Growi® consists
of a curved front wall with a cut-out dip in
the hinged door. The door includes a double-throw bolt.
Douglas fir
Width of 2510–3000 mm
Width of 3010–3500 mm
Width of 3510–4000 mm
No.
1120
1121
1122
Ekki
Width of 2510–3000 mm
Width of 3010–3500 mm
Width of 3510–4000 mm
1123
1124
1125
Bamboo
Surcharge to the price for Ekki, per stall element
1549
Recycled plastic planks
Surcharge to the price for Ekki, per stall element
1559
Additional elements
Surcharge for brass ball Ø 110 mm
Powder coating of the front wall, per m2
Rotary trough fixture (dimensions on p. 30)
Wood panelling with vent slots, per metre
No.
1548
700132
1482
1484
LUXURY MODELS CAN BE FOUND
BEGINNING ON PAGE 28
17
CLASSIC HORSE STABLES
Image above: Evando front walls with 1-piece hinged doors and rotary trough fixtures. Image below: Evando with 1-piece hinged doors and
window hatches.
A LINEAR FEEL
The Evando model comes at a height of 2200 mm as standard and is manufactured to the width dimensions that
you require. The grid section of the elements is 950 mm
high and consists of 3/4" tubes. These tubes are joined using concealed welds, with 50 mm clearance between each
bar. There is a feeding hatch in the wooden section of each
front wall. The hinged door is 1200 mm wide and is locked
with a hot-dip galvanised double-throw bolt. The hinged
door is suspended by two robust, two-dimensional hinges.
It can also be supplied as a 2-piece hinged door.
18
- Linear front wall with feeding hatch
- Hinged door can be 1-piece or 2-piece, with double-throw bolt
- Hot-dip galvanised grid section
- Upper U-profile is sealed to decrease the risk of injury if
the animals rear up
EVANDO
MODEL EVANDO – 1-PIECE
The Evando horse stable from Growi®
consists of a linear front wall with a feeding hatch and a 1-piece hinged door with
a double-throw bolt.
MODEL EVANDO – 2-PIECE
The Evando horse stable from Growi®
consists of a linear front wall with a
feeding hatch and a 2-piece hinged door
with a double-throw bolt. This allows
the window and the door to be opened
separately.
Douglas fir
Up to a width of 2500 mm
Width of 2510–3000 mm
Width of 3010–3500 mm
Width of 3510–4000 mm
No.
1454
1455
1456
1457
Ekki
Up to a width of 2500 mm
Width of 2510–3000 mm
Width of 3010–3500 mm
Width of 3510–4000 mm
1470
1471
1472
1473
Bamboo
Surcharge to the price for Ekki, per stall element
1549
Recycled plastic planks
Surcharge to the price for Ekki, per stall element
1559
Douglas fir
Up to a width of 2500 mm
Width of 2510–3000 mm
Width of 3010–3500 mm
Width of 3510–4000 mm
No.
1496
1497
1498
1499
Ekki
Up to a width of 2500 mm
Width of 2510–3000 mm
Width of 3010–3500 mm
Width of 3510–4000 mm
1500
1501
1502
1503
Bamboo
Surcharge to the price for Ekki, per stall element
1549
Recycled plastic planks
Surcharge to the price for Ekki, per stall element
1559
Additional elements
Rotary trough fixture (dimensions on p. 30)
Wood panelling with vent slots, per metre
Intermediate/additional post 90 x 90 x 2200 mm
with floor plate for anchoring
No.
1482
1484
1607
19
CLASSIC HORSE STABLES
Image above: Dorino front walls with Ekki wood panelling. Image below: Nabilia front walls with Ekki wood panelling and window hatches
The Dorino and Nabila horse stables from Growi® are hot-dip galvanised and feature integrated sliding doors. They have a
standard height of 2200 mm and are manufactured to the width dimensions that you require. The grid section of the elements is 950 mm high and consists of 3/4" tubes. These tubes are joined using concealed welds, with 50 mm clearance
between each bar. There is a feeding hatch in the wooden section of each front wall. The topmost rail above the bar is
enclosed. The sliding door has a width of 1200 mm. The door is locked via a bolt system. The door is hung in an enclosed
runner rail that has two twin steel runners with ball bearings. The end stop is fitted with a rubber bumper.
The Nabila horse stable has a linear front wall with an arch-shaped sliding door.
20
DORINO & NABILA
MODEL DORINO
The Dorino horse stable from Growi®
consists of a linear front wall with a
sliding door and a feeding hatch.
Douglas fir
Up to a width of 2500 mm
Width of 2510–3000 mm
Width of 3010–3500 mm
Width of 3510–4000 mm
No.
1450
1451
1452
1453
Ekki
Up to a width of 2500 mm
Width of 2510–3000 mm
Width of 3010–3500 mm
Width of 3510–4000 mm
1466
1467
1468
1469
Bamboo
Surcharge to the price for Ekki, per stall element
1549
Recycled plastic planks
Surcharge to the price for Ekki, per stall element
1559
Additional elements
Rotary trough fixture (dimensions on p. 30)
Window hatch in grid frame (dimensions on p. 30)
Wood panelling with vent slots, per metre
Intermediate/additional post 90 x 90 x 2200 mm with floor plate
for anchoring
MODEL NABILA
The Nabila horse stable from Growi®
consists of a linear front wall with an archshaped sliding door and a feeding hatch.
1482
1483
1484
1607
Douglas fir
Width of 2510–3000 mm
Width of 3010–3500 mm
Width of 3510–4000 mm
No.
1806
1807
1808
Ekki
Width of 2510–3000 mm
Width of 3010–3500 mm
Width of 3510–4000 mm
1809
1810
1811
Bamboo
Surcharge to the price for Ekki, per stall element
1549
Recycled plastic planks
Surcharge to the price for Ekki, per stall element
1559
Additional elements
Rotary trough fixture (dimensions on p. 30)
Window hatch in grid frame (dimensions on p. 30)
Wood panelling with vent slots, per metre
Intermediate/additional post 90 x 90 x 2200 mm with floor plate for
anchoring
1482
1483
1484
1607
21
CLASSIC HORSE STABLES
Cintaro front walls with Ekki wood panelling and vent slots
CINTARO – THE HALF-HEIGHT OPTION
Frame made of 50 x 40 x 4 mm U-profile and 50 x 50 x 3 mm square tube with vertical bars made of 3/4" tube. 50 mm
clearance between each bar, bar height approximately 200 mm. Hinge door with a clearance width of 1200 mm, attached on the left or right. Hinged door hung on robust, adjustable hinges. Double throw bolt system with safety mechanism to prevent the horses opening it. Wood panelling with a height of 1200 mm and a thickness of 38 mm, with tongue
and groove.
MODEL CINTARO
The Cintaro half-height horse stable from
Growi® consists of a linear front wall with
a hinged door and a double throw bolt.
22
Douglas fir
Up to a width of 2500 mm
Width of 2510–3000 mm
Width of 3010–3500 mm
Width of 3510–4000 mm
No.
1528
1529
1530
1531
Ekki
Up to a width of 2500 mm
Width of 2510–3000 mm
Width of 3010–3500 mm
Width of 3510–4000 mm
1536
1537
1538
1539
Bamboo
Surcharge to the price for Ekki, per stall element
1549
Recycled plastic planks
Surcharge to the price for Ekki, per stall element
1559
CINTARO & KALITA
Kalita front walls with Ekki wood panelling
KALITA – TRIUMPHAL ARCHES
Frame made of 50 x 40 x 4 mm U-profile and 50 x 50 x 3 mm square tube with horizontal bars made of 1 1/2" tube (48.3
mm). 320 mm clearance between each bar (arch section), 170 mm clearance between the panels and the first horizontal
tube. Hinged door with a clearance width of 1200 mm, attached on the left or right. Hinged door hung on robust, adjustable hinges. Double throw bolt system with safety mechanism to prevent the animals opening it. Wood panelling with a
height of 1200 mm and a thickness of 38 mm, with tongue and groove.
MODEL KALITA
The Kalita horse stable from Growi® consists of a curved front wall with horizontal
bars and a hinged door, which includes a
double-throw bolt.
Douglas fir
Width of 2510–3000 mm
Width of 3010–3500 mm
Width of 3510–4000 mm
No.
1812
1813
1814
Ekki
Width of 2510–3000 mm
Width of 3010–3500 mm
Width of 3510–4000 mm
1815
1816
1817
Bamboo
Surcharge to the price for Ekki, per stall element
1549
Recycled plastic planks
Surcharge to the price for Ekki, per stall element
1559
Intermediate/additional post 90 x 90 x 2200 mm with floor
plate for anchoring
1607
23
CLASSIC HORSE STABLES
Image above: Faana front wall – special construction method, with Ekki wood panelling. Small image: Faana front wall with Douglas fir panelling
FAANA – OPENS OUT COMPLETELY
Faana from Growi® has the same elements as the Evando horse stable (see pp. 18/19), except that the Faana
model has a special feature – the entire front wall can
swing out. See for yourself!
- Linear front wall with feeding hatch
- 1-piece hinged doors with double-throw bolt
- Hot-dip galvanised grid section
- Front wall swings out completely
MODEL FAANA
The Faana horse stable from Growi® consists of a linear front wall
with a feeding hatch and a 1-piece hinged door with a double-throw bolt. It can be opened up completely. Delivery includes
two 90 x 90 x 2200 mm steel columns.
24
Douglas fir
Up to a width of 3000 mm
Width of 3010–3500 mm
Width of 3501–4000 mm
No.
1980
1981
1984
Ekki
Up to a width of 3000 mm
Width of 3010–3500 mm
Width of 3501–4000 mm
1982
1983
1985
Bamboo
Surcharge to the price for Ekki, per stall element
1549
Recycled plastic planks
Surcharge to the price for Ekki, per stall element
1559
FAANA & ELEGIA & WALINA
Elegia front walls with Douglas fir panelling but with half-height doors
ELEGIA AND WALINA – A GREAT COMBINATION
Front wall with integrated feeding grid for efficient, species-appropriate provision of hay. The front wall has a total height of
2200 mm. The feeding grids are made of Ø 48.3 mm (1 1/2") round tube and are therefore especially sturdy. The height of the
lower wood panelling for the Elegia model is approximately 440 mm and the height of the upper section is approximately 300
mm. The tubes for the feeding grids are approximately 1500 mm in length, which results in a clearance height of approximately 1900 mm between the floor and the inside edge of the top of the feeding grid. The height of the hinged door is approximately 2200 mm and it has a clearance width of approximately 1200 mm. All steel parts are hot-dip galvanised.
MODEL ELEGIA
approx. 300 mm
Douglas fir
Width of 3000–3500 mm
Width of 3510–4000 mm
No.
1695
1696
Ekki
Width of 3000–3500 mm
Width of 3510–4000 mm
1689
1694
Douglas fir
Width of 3000–3500 mm
Width of 3510–4000 mm
No.
1820
1821
Ekki
Width of 3000–3500 mm
Width of 3510–4000 mm
1822
1823
MODEL WALINA
approx. 500 mm
25
CLASSIC HORSE STABLES
Galeno stable system series front wall with Douglas fir panelling
THE GALENO STABLE SYSTEM – INDIVIDUALISED AND ECONOMICAL
We offer fast delivery of Growi® Galeno horse stables from stock, in standard dimensions. The grid elements of this horse
stable can be shortened in increments of 100 mm. This allows for the individual consideration of structural design conditions on site during assembly. The Galeno post allows you to create any conceivable stable solution. There are also fittings
for anchoring to the wall. The grid elements consist of a welded grid frame with a height of 950 mm as well as vertical
bars made of 3/4" tube, with 50 mm clearance between each bar. There are 50 x 40 x 4 mm U-profile elements above and
below. Additionally, there is a U-profile floor rail for accommodating the 38 mm thick wooden panelling, with a recess
and a cover plate for inserting the wooden panelling.
The sliding door consists of a welded door frame with a height of 2150 mm, 50 x 40 x 4 mm U-profile elements above
and below and a 50 x 50 x 3 mm tubular steel side. The door has a clearance width of 1350 mm and comes with a fittings
set that includes a C-profile rail, 2 runners, a stopper and rail brackets. The wood panelling is not included in the price!
The square tube posts are approximately 2200 mm in length, have a profile of 80 x 80 x 3 mm and are 4-sided with
slotted holes for accommodating the grid frame. There is a 150 x 150 x 8 mm floor panel for anchoring, which is bolted
onto the posts on-site. The posts can be bolted to the centre of the floor panel or at the centre of one side. Thus the floor
panel can be customised for all kinds of assembly possibilities.
26
GALENO STABLE SYSTEM
GALENO STABLE SYSTEM:
INDIVIDUAL ASSEMBLY KIT, EASY SELF-ASSEMBLY
1
`` PRACTICAL ASSEMBLY KIT
`` CAN BE DISPATCHED IMMEDIATELY
Grid frame (height 950 mm) and floor rail
Width of 1530 mm, wood panelling not included
Width of 2030 mm, wood panelling not included
Width of 2960 mm, wood panelling not included
Width of 3460 mm, wood panelling not included
Frame for feeding hatch
To be built into the grid frame, approx. 440 x 245 mm (width x
height)
Sliding door, width of 1450 mm
Door frame, 2150 mm, with fittings set including C-profile rail.
Clearance width of 1350 mm between the posts, 2 runners, a
stopper and rail bracket. Wood panelling not included.
C-profile rail length: 3000 mm.
3
Square tube post
Tube profile of 80 x 80 x 3 mm, length of approximately 2200 mm.
4-sided with slotted holes for accommodating the grid frame.
There is a 150 x 150 x 8 mm floor panel for anchoring, which is
bolted onto the posts on-site. The posts can be bolted to the centre of the floor panel or at the centre of one side. The floor panel
can therefore be used on an individual basis for all assembly
possibilities.
System mounting elements
To be inserted into the system posts, per item
With flat plates for anchoring to the wall, per item
4
5
No.
1950
1951
1952
1953
1
2
1955
3
1960
4
1967
5
6
1968
1969
Wooden boards, long sides bevelled, price per m2 (see p. 53)
Ekki wood, 38 x 135 mm, with tongue and groove,
coverage width 120 mm ≙ 8.5 boards per metre
Douglas fir, 38 x 145 mm, with tongue and groove,
coverage width 130 mm ≙ 7.7 boards per metre
1551
1556-2
6
3
2
1
5
2
4
27
LUXURY HORSE STABLES
Image above: Belamie indoor stables with Ekki wood panelling and vent slots. Image below: Belamie indoor stables with additional powder-coating
28
BELAMIE & NANDO
ALL-PURPOSE ARCHES
The side elements of the Growi® Belamie and Nando horse stables have a height of 2200 mm. The frame of the stall element consists of 50 x 50 x 3 mm square tube and 50 x 40 x 4 mm U-profile iron. The vertical bars within the element are
made of 3/4" tube and are visibly welded with a clearance width of 50 mm between each bar. The wood panelling has a
thickness of 38 mm and features vent slots.
‘Belamie’ features a hinged door with an additional eyebolt lock in order to allow the door to be opened safely, as well as
a kickover latch near the bottom that is designed to prevent horses from kicking through with a hoof. The hinged door is
hung on robust, adjustable hinges, which can be attached on the left or right.
The centre columns each comprise of a Ø 100 mm steel tube with a height of 2450 mm and a foot plate. ‘Nando’ features
a sliding door with rubber bumpers to minimise noise.
SLIDING DOOR OR HINGED DOOR –
THE LUXURY NANDO AND BELAMIE
MODELS
MODEL NANDO
The Nando horse stable from Growi® consists of an arched front wall with a sliding door. The arch-shaped sliding door is moved back and forth on
a C-profile rail that has runners with ball bearings. The sliding door is locked using a spring-loaded bolt system. The end stop is fitted with a rubber
bumper to minimise noise. Delivery includes 38 mm thick Ekki wood with vent slots.
Ekki
Width of 2500–3000 mm
Width of 3010–4000 mm
No.
1710
1711
Bamboo
Surcharge to the price for Ekki, per stall element
1549
Recycled plastic planks
Surcharge to the price for Ekki, per stall element
1559
MODEL BELAMIE
The Belamie horse stable from Growi® consists of an arched front wall with a hinged door that has a height of 2200/2400 mm and a width of 1200
mm. The vertical bars in the door are made of 3/4" tube and are visibly circumferentially welded, allowing a clearance width of 50 mm between
each bar. The lower section of the door, which has a height of 1200 mm, contains wood panelling with a thickness of 38 mm. Includes two side
elements and two columns. Delivery includes 38 mm thick Ekki wood with vent slots.
Ekki
Width of 2500–3000 mm
Width of 3010–4000 mm
No.
1697
1698
Bamboo
Surcharge to the price for Ekki, per stall element
1549
Recycled plastic planks
Surcharge to the price for Ekki, per stall element
1559
29
HORSE STABLES
WINDOW HATCH IN GRID FRAME
This flap in the sliding door is used to allow the horses to look
out into the stable aisle. In the fixed grid section of a front wall,
this flap can be used for filling high volume hay racks. Only
possible at the same time as manufacturing the stable walls –
cannot be installed at a later date.
Surcharge for window hatch in grid frame
510 x 796 mm (W x H)
ROTARY TROUGH FIXTURE
No.
1483
`` HIGH VOLUME HAY RACKS PAGE 131
The rotary trough fixture makes it possible to swing the feed
troughs into the stable aisle so that they can be filled from the
stable aisle. Only possible at the same time as manufacturing the
stable walls – cannot be installed at a later date.
The semicircular horse trough is not included in the price –
see page 125.
Surcharge for rotary trough fixture
660 x 250 mm (W x H)
No.
1482
STORAGE CABINET AS PART OF THE STABLE FRONT WALL
This integrated cabinet, which is beneath the feed trough, can be
opened from the stable aisle. Storage cabinet for riding equipment. The exact dimensions of the cabinet and its design depend
on the front of the stable. These cabinets are manufactured on an
individualised basis. Only possible at the same time as manufacturing the stable walls – cannot be installed at a later date.
Surcharge for integrated storage cabinet
1100 x 500 x 400 mm (height x width x depth)
30
No.
1488
ACCESSORIES
Cintaro front walls with Ekki wood panelling and vent slots
HALF-HEIGHT STABLE DOOR
1
2
Hinged stable door 1400 x 1200 mm (height x width), frame made of 50 x 50 x 3
mm square tube, vertical bars made of 3/4" tube, visibly circumferentially welded,
allowing a clearance width of 50 mm between each bar. Lower door area made
of 38 mm thick wood panelling, 1200 mm high with tongue and groove. Double-throw bolt for safe opening of the door. The hinged door is hung on robust,
adjustable hinges, attached either on the left or the right. Opening angle approx.
160°, clearance width approx. 1200 mm.
Stable door – 1400 x 1200 mm
2 x Ø 100 mm vertical columns, foot plate, Douglas fir
2 x Ø 100 mm vertical columns, foot plate, Ekki wood
2 square tubes for anchor fastening, Douglas fir
2 square tubes for anchor fastening, Ekki wood
1
2
No.
1690
1692
1691
1693
GRID FOR RETROFITTING
Grid for retrofitting onto existing masonry walls. The grid section has a height of
1000 mm and consists of welded 3/4" tubes, with a clearance of 50 mm between
each bar. The frames of the grids for retrofitting are made of 50 x 50 x 3 mm square
tube and 50 x 40 x 4 mm U-profile iron. The topmost rail above the bar is enclosed.
On request, we can also manufacture these grids in all other dimensions for you, as
far as this is technically possible.
Grid for retrofitting onto existing masonry walls.
Width of 2510–3000 mm, height of 1000 mm
Width of 3010–4000 mm, height of 1000 mm
No.
1680
1681
SLIDING DOOR FOR WALL MOUNTING
Horse stable sliding door that can be mounted on existing walls or stable walls.
Sliding door measuring 1300 mm wide x door frame height of 2150 mm. Includes
C-profile rail (3000 mm in length), 2 runners, a stopper and rail bracket. Wood
panelling not included.
Sliding door for wall mounting
Sliding door, includes rail system – 1300 x 2360 (W x H)
No.
1136
31
FACILITIES FOR HORSES
THE PERFECT FIT
Functional, stylish, individual – we will help you to find a solution that is the
perfect fit for your requirements. Here at Growi®, one of our quality indicators is
whether we succeed in finding the perfect way to meet your needs!
32
SEPARATION WALLS
CLASSIC
Model ABIANA
Model DAKOTA
Model TAMERA
Model WAIKANTO
Model INAO
Model KAGURA
Model GALA
Model LASELLE
LUXURY
Model MORENGO
WITH US, YOU ARE
ON THE RIGHT TRACK!
33
SEPARATION WALLS
MAKING MUCKING OUT FASTER – OUR SOLUTION
Ì
Ì
Ì
Ì
Pivoting separation walls are
well-suited to mucking out entire
rows of stables. Type: Waikanto.
Pivoting front wall for using a farm loader to muck out individual stables from the
front. Type: Faana.
«
«
«
«
With sliding separation walls, the horses can be
accommodated in the stable aisle while the work
is being done.
34
FLEXIBLE SOLUTIONS
HEY PRESTO, THE WALLS HAVE MOVED!
We can manufacture any of our separation walls with this feature so that you can pull the wall into the stable
aisle. To do this, heavy-duty rollers are added to the separation walls, along with a sturdy handle on the stable
aisle side. To guide the movement, a crossbar is installed above the separation wall. The separation wall is
guided towards the stable aisle on two polyamide rollers with ball bearings. A U-profile piece is bolted onto the
external box wall to provide a recess for aligning the separation wall.
Surcharge for pull-out
system separation walls
All models
No.
1746
Our example:
You can move the horses to the
stable aisle in just one simple
step so you can use the space for
mucking out.
Belmondo Rodeo
The Rodeo rubber mat provides the horse stall with impact protection. Its shock-absorbing qualities prevent hip and leg injuries. It also reduces noise levels in your stables. The rubber mat can be easily cut to size and its texture is reminiscent of wooden
planks. The underside of the Rodeo mat has a ribbed pattern. The rubber mat can
either be screwed into place or the entire mat can be glued down.
Price per mat
No.
4014
35
SEPARATION WALLS
MODEL INAO
The Growi® Inao separating wall has a height
of 1400 mm. The grid has a height of 200 mm
and the wooden section has a height of 1200
mm.
MODEL KAGURA
The Growi® Kagura separating wall has a
height of 2200 mm and features horizontal
tubes. The wooden section has a height of
1200 mm.
For bar spacing see page 23, Kalita front wall.
MODEL WAIKANTO
The Waikanto separating wall from
Growi® can be pivoted freely and has a
height of 2200 mm. The grid has a height
of 950 mm and the wooden section has a
height of 1200 mm.
Delivery includes two 90 x 90 x 2200 mm
square tube posts with floor plates.
36
Douglas fir
Up to a width of 2500 mm
Width of 2510–3000 mm
Width of 3010–3500 mm
Width of 3510–4000 mm
No.
1532
1533
1534
1535
Ekki
Up to a width of 2500 mm
Width of 2510–3000 mm
Width of 3010–3500 mm
Width of 3510–4000 mm
1540
1541
1542
1543
Bamboo
Surcharge to the price for Ekki, per stall element
1549
Recycled plastic planks
Surcharge to the price for Ekki, per stall element
1559
Douglas fir
Up to a width of 2500 mm
Width of 2510–3000 mm
Width of 3010–3500 mm
Width of 3510–4000 mm
No.
1824
1825
1826
1827
Ekki
Up to a width of 2500 mm
Width of 2510–3000 mm
Width of 3010–3500 mm
Width of 3510–4000 mm
1828
1829
1830
1831
Bamboo
Surcharge to the price for Ekki, per stall element
1549
Recycled plastic planks
Surcharge to the price for Ekki, per stall element
1559
Douglas fir
Up to a width of 2500 mm
Width of 2510–3000 mm
Width of 3010–3500 mm
Width of 3510–4000 mm
No.
1462
1463
1464
1465
Ekki
Up to a width of 2500 mm
Width of 2510–3000 mm
Width of 3010–3500 mm
Width of 3510–4000 mm
1478
1479
1480
1481
Bamboo
Surcharge to the price for Ekki, per stall element
1549
Recycled plastic planks
Surcharge to the price for Ekki, per stall element
1559
Additional elements
Manure plank
1485
CLASSIC
MODEL ABIANA
The Growi® Abiana separating wall has a
height of 2200 mm. The grid has a height
of 950 mm and the wooden section has a
height of 1200 mm.
The U-profile on the separation wall is fully
sealed at the top!
MODEL DAKOTA
The Growi® Dakota separating wall has a
height of 2200 mm. The grid has a height
of 950 mm and the wooden section has a
height of 1200 mm. The panelling to prevent food envy has an approximate width
of 1000 mm.
MODEL TAMERA
Douglas fir
Up to a width of 2500 mm
Width of 2510–3000 mm
Width of 3010–3500 mm
Width of 3510–4000 mm
No.
1458
1459
1460
1461
Ekki
Up to a width of 2500 mm
Width of 2510–3000 mm
Width of 3010–3500 mm
Width of 3510–4000 mm
1474
1475
1476
1477
Bamboo
Surcharge to the price for Ekki, per stall element
1549
Recycled plastic planks
Surcharge to the price for Ekki, per stall element
1559
Douglas fir
Up to a width of 2500 mm
Width of 2510–3000 mm
Width of 3010–3500 mm
Width of 3510–4000 mm
No.
1730
1731
1732
1733
Ekki
Up to a width of 2500 mm
Width of 2510–3000 mm
Width of 3010–3500 mm
Width of 3510–4000 mm
1738
1739
1740
1741
Bamboo
Surcharge to the price for Ekki, per stall element
1549
Recycled plastic planks
Surcharge to the price for Ekki, per stall element
1559
Douglas fir
The Growi® Tamera separating wall has a height Up to a width of 2500 mm
Width of 2510–3000 mm
of 2200 mm and has wooden panelling all
the way up. Height of lower wood panelling: Width of 3010–3500 mm
approx. 1200 cm. Height of upper wood panel- Width of 3510–4000 mm
ling: approx. 950 cm.
No.
1734
1735
1736
1737
Ekki
Up to a width of 2500 mm
Width of 2510–3000 mm
Width of 3010–3500 mm
Width of 3510–4000 mm
1742
1743
1744
1745
Bamboo
Surcharge to the price for Ekki, per stall element
1549
Recycled plastic planks
Surcharge to the price for Ekki, per stall element
1559
37
SEPARATION WALLS
Laselle separation wall with Douglas fir panelling.
LUXURY SEPARATION WALLS
The separation walls that Growi® builds have a high standard of quality and allow
as much individual design freedom as possible. We have an exclusive selection of
shapes and colours, which means that you can design a stable that suits you down
to the ground. Whether a classical style or a modern feel, we will be glad to fulfil
your requests. So why not be a trendsetter?
38
LUXURY
MODEL MORENGO
The Growi® Morengo separating wall has a
height of 2200 mm. The grid has a height of
950 mm and the wooden section has a height
of 1200 mm. It is delivered with Ekki wood
panelling.
Ekki
Width of 3010–3500 mm
Width of 3510–4000 mm
No.
1699
1700
Bamboo
Surcharge to the price for Ekki, per stall element
1549
Recycled plastic planks
Surcharge to the price for Ekki, per stall element
1559
Ekki
Width of 3010–3500 mm
Width of 3510–4000 mm
No.
1712
1713
Bamboo
Surcharge to the price for Ekki, per stall element
1549
Recycled plastic planks
Surcharge to the price for Ekki, per stall element
1559
Ekki
Width of 3010–3500 mm
Width of 3510–4000 mm
No.
1714
1715
Bamboo
Surcharge to the price for Ekki, per stall element
1549
Recycled plastic planks
Surcharge to the price for Ekki, per stall element
1559
MODEL GALA
In the area where the drinking bowl and feed
trough are located, the Gala model separation
wall from Growi provides visual protection from
food envy. It is only in the mid-section of the
separation wall that the visual barrier is replaced
with ¾" diameter vertical tubes. This separation
wall, with its aesthetic design feature of inset
horizontal Ekki wood planks, is part of our luxury
range.
MODEL LASELLE
The Laselle separating wall from Growi features
visual protection from food envy. The luxury design is inspired by the silhouette of a horse’s head,
which is incorporated into the design – the best
separating wall your stable will ever have seen!
The Ekki wood section has a height of 1200 mm.
39
FACILITIES FOR HORSES
ENJOY THE VIEW
Light and air – with our stable windows and doors,
improving the comfort and health of your horses is
easy. And the great view is an added bonus!
40
STABLE WINDOWS AND DOORS
WINDOWS
Model
SIDE-HUNG WINDOW
STRAIGHT
Model
TILT & TURN WINDOW
STRAIGHT
Model
TILT & TURN WINDOW
ARCHED
Model
WOOD PANELLING
STRAIGHT
Model
TILT & TURN WINDOW
ARCHED
Model
HERRINGBONE WOOD
STRAIGHT
Model
DIAMOND WINDOWS
STRAIGHT
DOORS
Model
SIDE-HUNG WINDOW
STRAIGHT
GATES
Model
HINGED DOOR
STRAIGHT
Model
DIAMOND WINDOWS
ARCHED
41
STABLE WINDOWS AND DOORS
LOCKS FOR STABLE WINDOWS
1
2
2+3
CALCULATIONS FOR DOORS AND WINDOWS
Minimum sizes
Window:1.00 x 1.00 m
Door: 1.20 x 2.20 m
Example calculation for a door with a non-standard
width
1.40 x 2.20 m (W x H) = 3.08 m2 x €23.80 = €73.30
FOR CUSTOM DIMENSIONS
Custom dimensions
Surcharge of €23.80/m2
2. Catch
3. A
luminium doorknob
Clearance height (H)
1. Budget lock with
square key
Outward-opening, in line with DIN (left) Outward-opening, in line with DIN (right)
Clearance width (W)
RECOMMENDED STANDARD DIMENSIONS FOR STABLE FACILITIES
External stable doors should be 1200 mm wide and the total height should be approximately 1.3 times the WH. The stable’s external doors should be wide enough to allow a tractor to
drive along the stable aisle. It is recommended that doors have a width of 3000 mm and a
height of 3000 mm.
42
INFORMATION
STABLE DOOR WITH DOUBLE-THROW LOCK.
Type A
1
2+3
1. Window:
catches
2. Door exterior:
double-throw
3. Door interior:
ball doorknob
1. Window:
budget lock with
square key
2. Door exterior:
double-throw
3. Door interior:
ball doorknob
Type B
STABLE DOOR WITH PROFILE CYLINDER LOCK
1
Type C
1. Door interior:
espagnolette
2. Door exterior:
lever handle
3. Door interior:
Drop-ring spindle
key
43
STABLE WINDOWS AND DOORS
STABLE WINDOWS – SIDE-HUNG OR TILTING
When it comes to quality, Growi® stable windows are produced and finished to the highest
of standards. Growi® stable windows are characterised by being sturdy, functional and robust. You can choose from a different basic types of window: Side-hung windows and tilt &
turn windows, straight or arched. In addition to the standard measurements of 1000 x 1000
mm, we can also produce your windows in all sizes, as far as this is technically possible.
SIDE-HUNG WINDOW – STRAIGHT
The Growi® 1000 x 1000 mm side-hung window includes an inner
grid frame and has a linear shape.
The side-hung double window consists of two pivoting frames.
First, the window pane opens and the inner grid frame remains
closed. After this, you can open the inner grid frame separately and
completely open the window.
Growi® side-hung window, straight
Side-hung window, 1000 x 1000 mm
Side-hung double window, 1000 x 1000 mm
Surcharge for budget lock
Surcharge for lock with turning aluminium doorknob,
external side only
Powder coating in a RAL colour
Surcharge for custom dimensions per m2 (see p. 42)
TILT & TURN WINDOW – STRAIGHT
1434
No.
1431
1441
1442
1434
The Growi® 1000 x 1000/1200 mm tilt & turn window has a curving,
arched shape and includes an inner grid frame. The window
operates in the same way as the straight design tilt & turn window.
Delivery time: 4 weeks.
Growi® tilt & turn window, arched
1000 x 1000/1200 mm
Surcharge for budget lock
Surcharge for lock with turning aluminium doorknob,
external side only
Powder coating in a RAL colour
Surcharge for custom dimensions per m2 (see p. 42)
44
No.
1430
1432
1441
1442
The Growi® 1000 x 1000 mm tilt & turn window includes an inner
grid frame and has a linear shape. The window can also be tilted to
provide permanent ventilation, even while the window frame itself
remains closed and locked.
Growi® tilt & turn window, straight
1000 x 1000 mm
Surcharge for budget lock
Surcharge for lock with turning aluminium doorknob,
external side only
Powder coating in a RAL colour
Surcharge for custom dimensions per m2 (see p. 42)
TILT & TURN WINDOW – ARCHED
ASE
ERING, PLE
WHEN ORD
G
IN
N
HE OPE
MENTION T
!
DIREC TION
No.
1428
1441
1442
1434
WINDOWS
Advantages:
-Tilt and/or turn functionality
-Easy installation
-Available as DIN right or left
-Removable grid frame (only for side-hung windows)
allows for easy cleaning of glass pane
-Casement is mounted via adjustable eye bolts, secured
to prevent lift-out
-Various locking options
-All dimensions available, as far as this is technically
possible
-Window pane installed using rubber welt, i.e. no unsightly silicone adhesive joints
-Best price-performance ratio
Technical description:
-Casing: angle steel 40/40/5 mm with brackets for
anchoring
-Window frame: profiled tube with adjustable eye bolts
-Glazing: safety glazing (4 mm) with rubber welt profile
-Inner grid frame: removable (only for side-hung windows), 50 mm clearance between bars
-Lock: catch or budget lock
Above: Straight, side-hung window. Below: Arched tilt & turn windows, powder-coated
45
STABLE WINDOWS AND DOORS
ASE
ERING, PLE
WHEN ORD
G
HE OPENIN
MENTION T
!
DIREC TION
STABLE DOOR WITH SIDE-HUNG WINDOW
The Growi® stable door with a side-hung window measures 1200 x 2200 mm. It has a linear shape and consists
of two sections. The stable door can be opened both from inside and from outside. It is delivered with 30 mm
thick Denya wood panelling. See pages 42-43 for detailed information about our range of locks.
Growi® stable door with side-hung window, 1200 x 2200 mm (W x H)
Door: Double throw lock. Window: Catch
Door: Double throw lock with ball doorknob. Window: Budget lock
Door: Lever handle and drop-ring spindle key. Window: Internal lock
Powder coating in a RAL colour
Surcharge for custom dimensions per m2 (see p. 42)
Type
A
B
C
No.
1408
1421
1418
1440
STABLE DOOR WITH TILT & TURN WINDOW
The Growi® stable door with a tilt & turn window measures 1200 x 2200 mm. It has a linear shape and consists
of two sections. The stable door can be opened from the inside and from the outside. It is delivered with 30
mm thick Denya wood panelling. See pages 42-43 for detailed information about our range of locks.
Growi® stable door with tilt & turn window, 1200 x 2200 mm (W x H)
Door: Double throw lock. Window: Catch
Door: Double throw lock with ball doorknob. Window: Budget lock
Door: Lever handle and drop-ring spindle key. Window: Internal lock
Powder coating in a RAL colour
Surcharge for custom dimensions per m2 (see p. 42)
Type
A
B
C
No.
1404
1422
1419
1440
STABLE DOOR WITH WOOD PANELLING
The Growi® stable door with wood panelling measures 1200 x 2200 mm. It has a linear shape and consists of
one section. It does not have a window and it includes 30 mm thick Denya wood panelling for the whole door.
Growi® stable door with wood panelling, 1200 x 2200 mm (W x H)
Door: Lever handle and drop-ring spindle key
Surcharge for custom dimensions per m2 (see p. 42)
Type
C
No.
1420
ARCHED STABLE DOOR
The Growi® arched stable door measures 1200 x 2000/2200 mm and consists of two sections. It includes a tilt &
turn window with a catch and a door with a double throw lock and 30 mm thick Denya wood panelling.
Growi® arched stable door tilt & turn window, 1200 x 2000/2200 mm
(W x H)
Door: Double throw lock. Window: Catch
Powder coating in a RAL colour
Surcharge for custom dimensions per m2 (see p. 42)
46
Type
No.
A
1409
1440
DOORS
Advantages:
-Tilt and/or turn
-Easy installation
-Available as DIN right or left
-Casement and lower leaf mounted via adjustable eye
bolts, secured to prevent lift-out
-Various locking options
-All dimensions available, as far as this is technically possible
-Window pane installed using rubber welt i.e. no unsightly
silicone adhesive joints
-Best price-performance ratio
Technical description:
-Casing: angle steel 60/60/6 mm with brackets for anchoring
-Window frame: profiled tube with adjustable eye bolts
-Lower door: profiled tube with adjustable eye bolts
-Glazing: safety glazing (4 mm) with rubber welt profile
-Lock: see p. 43 for detailed information
-Wood: Denya wood panelling, 30 mm
Stable door with plastic panelling
STABLE DOORS – BESPOKE DESIGN
Growi®stable doors are produced and finished to the highest of standards. They
are characterised by being sturdy, functional and robust. In addition to the
standard dimensions of 1200 x 2200 (W x H), we can also manufacture them to
custom dimensions, as far as this is technically possible.
STRAIGHT OR
ARCHED?
47
STABLE WINDOWS AND DOORS
Growi® arched stable entrance door; hemlock wood panelling; powder-coated.
Wood:
Profiled boards 12.5 x 96 mm
The profiled boards that we manufacture from Nordic
softwood have a width of 12.5 mm and we add a shadow
groove profile. We only use A-graded boards, which are
then planed and chamfered. The boards are pre-primed
or impregnated, the latter of which results in a light-green
colour.
48
You can add the colour of your choice to the wood yourself by adding a layer of varnish or outdoor paint.
When constructing Growi® stable entrance doors, the 12.5
mm thick tongue and shadow groove profiled wood is
glued onto a weather-resistant carrier plate. From the outside, the doors have a unified appearance. From the inside,
the dark brown carrier plate can be seen.
GATES
STABLE ENTRANCE DOORS –
VERY ADAPTABLE
Technical description:
-Casing: angle steel 80/80/8 mm with
brackets for anchoring
-Frame: profiled tube with adjustable
eye bolts
-Glazing: safety glazing (4 mm) with
rubber welt profile
-Inner grid frame: removable, 50 mm
clearance between bars
-Lock:
External: lock with profile cylinder and
lever handle. Internal: door espagnolette
Single door with Nordic softwood panelling.
STABLE ENTRANCE DOOR WITH DIAMOND WINDOWS
The Growi® stable entrance door with diamond-shaped
windows is divided horizontally and consists of four sections.
The wood filling is made up of a weather-resistant carrier plate
with a 12.5 mm thick layer of Nordic softwood panelling. Lock:
Type C.
Growi®stable entrance door with diamond-shaped windows
2400 x 2200 mm (W x H)
2400 x 3000 mm (W x H)
3000 x 2200 mm (W x H)
3000 x 3000 mm (W x H)
ARCHED STABLE ENTRANCE DOOR
No.
1210
1212
1211
1213
The Growi® arched stable entrance door is divided horizontally
and consists of four sections. The wood filling is made up of
a weather-resistant carrier plate with a 12.5 mm thick layer of
Nordic softwood panelling. Lock: Type C.
Growi® arched stable entrance door
2400 x 2200 mm (W x H)
2400 x 3000 mm (W x H)
3000 x 2200 mm (W x H)
3000 x 3000 mm (W x H)
No.
1215
1217
1216
1218
49
STABLE WINDOWS AND DOORS
Growi® stable entrance door with fitted herringbone look and side-hung window on the left (hemlock wood)
STABLE ENTRANCE DOOR – HERRINGBONE
This Growi® stable entrance door with a fitted herringbone look comes with doors that are divided horizontally into two leaves, resulting in four sections. The wood filling is made up of a weather-resistant carrier plate with a 12.5 mm thick layer of Nordic softwood panelling. Lock: Type C.
Growi® stable entrance door with herringbone look
2400 x 2200 mm (W x H)
2400 x 3000 mm (W x H)
3000 x 2200 mm (W x H)
3000 x 3000 mm (W x H)
50
No.
1226
1228
1227
1229
GATES
Growi® stable entrance door with side-hung windows, additional dividing elements and hemlock wood panelling.
STABLE ENTRANCE DOOR WITH SIDE-HUNG WINDOW
This Growi® stable entrance door with a side-hung window is divided horizontally and consists
of four sections. The wood filling is made up of a weather-resistant carrier plate with a 12.5 mm
thick layer of Nordic softwood panelling. Lock: Type C
Growi®stable entrance door with side-hung windows
2400 x 2200 mm (W x H)
2400 x 3000 mm (W x H)
3000 x 2200 mm (W x H)
3000 x 3000 mm (W x H)
No.
1220
1222
1221
1223
51
SLIDING STABLE DOORS
Growi® double sliding door system
SLIDING STABLE DOORS
Growi® double sliding doors are edged on all sides by a completely
hot-dip galvanised square tube frame. The wooden covering
consists of 12.5 mm thick tongue and groove profiled boards. Two
smooth-running pairs of runners guide the doors along an enclosed
C-profile rail. The door is locked with a hook lock. If desired, we can
integrate windows or personnel passages into your sliding doors.
These Growi® sliding door systems are also available as stand-alone
products.
Variation made using insulated corrugated sheeting, price on request
Delivered with a drop-ring locking system.
52
Growi® single sliding door system
2000 x 2500 mm (W x H)
2000 x 3000 mm (W x H)
2000 x 3500 mm (W x H)
2000 x 4000 mm (W x H)
No.
1750
1751
1752
1753
Growi® double sliding door system
3000 x 2500 mm (W x H)
3000 x 3000 mm (W x H)
3000 x 3500 mm (W x H)
3000 x 4000 mm (W x H)
1754
1755
1756
1757
4500 x 2500 mm (W x H)
4500 x 3000 mm (W x H)
4500 x 3500 mm (W x H)
4500 x 4000 mm (W x H)
1758
1759
1760
1761
ACCESSORIES AND LOCKS
ACCESSORIES FOR STABLE WINDOWS/STABLE DOORS
3
2
1
Accessories for Stable Windows and Doors
Double throw bolt system for Growi® stable doors
Flat steel lifting rod, 30 x 6 mm. Length approx. 950
mm,
includes upper and lower locking plates
Double throw bolt system for Growi® horse stables
Flat steel lifting rod, 30 x 6 mm. Length approx. 830
mm,
includes upper and lower locking plates
Upper window catch for side-hung windows
Upper window catch for tilt & turn windows
Cabin hook & eye, includes triangular aluminium plate
Cabinet/budget lock for 8 mm square key
Square key, 6-9 mm, conical
Eye bolt for stable window, M12 x 60 mm with nut
4
6
5
8
9
7
Stainless steel drop-ring spindle key, ring diameter
approx. 65 mm
Tube frame lock, PZW 28, 20 mm mandrel; 92/8 lock
facing, silver; single-throw
Lever handle set, aluminium, silver
Door/window magnet, for screw mounting. Ø 65 mm,
height of 70 mm
11
10
1
No.
1406
1245
2
3
4
5
6
7
1444
1448
1449
1233
1234
1235
8
1230
9
1231
10
11
1232
1236
1
2
3
4
5
6
7
No.
1237
1238
1239
1240
1241
1242
1243
1
No.
1551
2
1551-1
3
1556-2
ACCESSORIES FOR HORSE STABLES
2
1
3
5
4
6
7
Accessories
Galvanised C-profile rail, 40 x 34 mm – 6 m rod
Rail bracket for C-profile rail
Pair of end stops with rubber buffers for C-profile rail
Runners for C-profile rail
Rubber buffer end stop for a sliding door
Locking plate for wood cut-out
Latch for horse stables, can be used on the right or the
left
WOODEN BOARDS
4
2
1
3
Wooden boards, price per m2
Ekki wood, 38 x 130 mm, tongue and groove,
coverage width 120 mm ≙ 8.4 boards per metre
Ekki wood, 38 x 130 mm, tongue and groove,
vent slots, coverage width 120 mm ≙ 8.4 boards per metre
Douglas fir, 38 x 140 mm, tongue and groove,
coverage width 130 mm ≙ 7.7 boards per metre
Douglas fir, 38 x 140 mm, tongue and groove,
vent slots, coverage width 130 mm ≙ 7.7 boards per metre
Denya wood, 30 x 145 mm, tongue and groove,
coverage width 135 mm ≙ 7.4 boards per metre
Recycled plastic planks, 38 x 140 mm, tongue and groove,
coverage width 130 mm ≙ 8.4 planks per metre
Bamboo planks, 38 x 140 mm, tongue and groove,
coverage width 130 mm ≙ 8.4 planks per metre
1556-1
4
1550
1554
1410
53
FACILITIES FOR HORSES
SAFE SEPARATION
If you want to give your horses more room to
move about, Growi® paddocks are the perfect
solution. They feature sturdy workmanship, are
easy to install and are simply very safe.
54
PADDOCKS
PADDOCK ELEMENTS
Model GV 2
Model GV 3
Model GV 2 FIX
Model GV 3 FIX
Model GV 4
FEEDING GRIDS
Model SAFETY 3000
Model SAFETY 4000
Model SAFETY 5000
55
GATES & PANELS
GATES
They are functional, robust and they look slick. What’s more, they are extremely versatile! We
manufacture your gates according to your individual measurements so that they perfectly
fit the space where they will be doing their job for a long time. Completely reliable – our
gates are the product of heaps of knowledge about what safety should look like at a stable.
It all begins with choosing the right materials. When building our gates, we only use solid,
hot-dip galvanised steel tubes with a diameter of two inches. This ensures that the gates are
long-lasting and resilient, even after being exposed to years of rigorous wear and tear. Safety
often boils down to the small details. That’s why we make sure that our gates don’t have any
unnecessary gaps, corners or eyelets that could result in a horse injuring itself.
As you can see, being practically relevant is very important to Growi®. For that reason, we
manufacture our gates at our very own factory in Rietberg. This allows us to keep an eye on
the thing that is most important to us – quality.
Detail views
Installation length (measured from hole centre to hole centre)
1
GV3
3
480 mm
sturdy flat-profile plate
1. Fixed mounting
element
60 x 60 mm
2
0 102 mm
0 48.3 mm
0 60.3 mm
2. Eye bolt for balancing
1
GV4
300 mm
60 x 60 mm
4
sturdy flat-profile plate
3. Round bolt lock
2
0 102 mm
0 48.3 mm
0 60.3 mm
4. Double round bolt lock
56
INFORMATION
PANELS
Adaptable and very robust – you’re sure to be on the safe side with our panels. Adjustable bolts for balancing make for a
perfect installation and the flat plates are bolted directly onto the posts. Protective bars in the intermediate space provide
all-round protection from injuries – even with tried and tested products, a little improvement is always possible.
And because safety should be standard practice in stables, you can adapt our panels to suit your individual requirements.
Length of the element (measured from start to end of
tube)
GV2 FIX
480 mm
1
0 60.3 mm
Detail views
80 x 80 mm
1. Vertical flat plate
screwed in directly.
Installation length (measured from hole centre to hole centre)
2
sturdy flat-profile
plate
480 mm
GV2
60 x 60 mm
3
0 48.3 mm
0 60.3 mm
2. Fixed mounting
element
0 102 mm
2
GV4
300 mm
sturdy flat-profile plate
3. Eye bolt for balancing
60 x 60 mm
3
0 48.3 mm
0 60.3 mm
0 102 mm
57
PADDOCKS
PANELS – EASY TO COMBINE
Growi® panels are available in two versions – either with fixed measurements or
with a variable width that can be adapted by up to 1000 mm. The horizontal steel
tubes have a diameter 60.3 mm. The vertical, flat-profiled elements of the GV FIX
fences have a thickness of 8 mm. The GV series on page 59 also consists of vertical
60.3 mm steel tubes and the slide-in sections are made of 48.3 mm tube. The vertical square tubes measure 60 x 60 mm. The GV series panels will be delivered with
two eye bolts and two fixed mounting elements, which are included in the price.
Posts, clamps and additional installation accessories can be found on pages 64–65.
GV2 FIX PANEL
The GV2 FIX panel has a height of 600 mm. The tube
spacing is 480 mm. It consists of two Ø 60.3 mm
horizontal tubes and is used to fence off paddocks.
Price does not include posts.
Length of the element
3000 mm
4000 mm
GV3 FIX PANEL
The GV3 FIX panel has a height of 1140 mm. The
tube spacing is 480 mm. It consists of three Ø 60.3
mm horizontal tubes and is used to fence off paddocks. Price does not include posts.
Length of the element
3000 mm
4000 mm
58
No.
992107
992108
No.
993107
993108
PANELS
GV2 PANEL
The GV2 panel has a height of 600 mm. The tube spacing is 480 mm.
The elements can each be extended by 1000 mm, which makes them
very easy to install. Price includes fittings (2 x fixed mounting element,
2 x eye bolts), excludes posts and clamps.
Installation length
1430–2410 mm
2230–3210 mm
3230–4210 mm
4230–5210 mm
5030–6010 mm
GV3 PANEL
The GV3 panel has a height of 1140 mm. The tube spacing is 480 mm.
The elements can each be extended by 1000 mm, which makes them
very easy to install. Price includes fittings (2 x fixed mounting element,
2 x eye bolts), excludes posts and clamps.
Installation length
1430–2410 mm
2230–3210 mm
3230–4210 mm
4230–5210 mm
5030–6010 mm
GV4 PANEL
No.
992100
992101
992102
992103
992104
No.
993000
993001
993002
993003
993004
The GV4 panel has a height of 1140 mm. The tube spacing is 300 mm.
The elements can each be extended by 1000 mm, which makes them
very easy to install. Fittings (2 x fixed mounting element, 2 x eye bolts),
posts and clamps not included.
Installation length
1430–2410 mm
2230–3210 mm
3230–4210 mm
4230–5210 mm
5030–6010 mm
No.
994000
994001
994002
994003
994004
59
PADDOCKS
THE PERFECT SOLUTION FOR YOUR EXTERNAL OR INTERNAL AREAS!
GV2 GATE ELEMENT
The GV2 gate element has a height of 600 mm and the tube spacing
is 480 mm. The elements can each be extended by 1000 mm, which
makes them very easy to install. Price includes fittings (1 x fixed
mounting element, 1 x eye bolt, 1 x sliding bolt), excludes posts and
clamps.
Installation length
1600–2350 mm
2400–3150 mm
3400–4150 mm
4400–5150 mm
5200–5950 mm
GV3 GATE ELEMENT
The GV3 gate element has a height of 1140 mm and the tube spacing
is 480 mm. The elements can each be extended by 1000 mm, which
makes them very easy to install. Price includes fittings (1 x fixed
mounting element, 1 x eye bolt, 1 x sliding bolt), excludes posts and
clamps.
Installation length
1375–2355 mm
2175–3155 mm
3175–4155 mm
4175–5155 mm
4975–5955 mm
GV4 GATE ELEMENT
No.
992120
992121
992122
992123
992124
No.
993021
993022
993023
993024
993025
The GV4 gate element has a height of 1140 mm and the tube spacing
is 300 mm. The elements can each be extended by 1000 mm, which
makes them very easy to install. Price includes fittings (1 x fixed
mounting element, 1 x eye bolt, 1 x sliding bolt), excludes posts and
clamps.
Installation length
1375–2355 mm
2175–3155 mm
3175–4155 mm
4175–5155 mm
4975–5955 mm
No.
994021
994022
994023
994024
994025
Drop-ring lock for Growi GV elements
The Growi® drop ring lock is mounted in the centre of the head rail of the GV element.
This type of installation makes it possible to open the gate in either direction. The lock has
a 20 mm thick steel bolt, which is embedded by 55 mm when in the locked position. For
safety, a compression spring holds the bolt in the locked position. There is an additional
safety mechanism that prevents the animals from opening this lock. This mechanism
must first be deactivated before the spring lock can be operated.
Surcharge for drop-ring lock
(Only possible when ordering complete gate elements)
60
No.
993026
GATES
Paddock units made up of GV3 FIX elements
GV2 gate element
GATES – WITH ROUND BOLT LOCKS
Growi® gates are made of Ø 60.3 mm steel tube and a Ø 48.3
mm slide-in section. The basic elements are hot-dip galvanised and can either be used as permanent fencing or as gate
elements. Fittings can be combined as desired. The range of
elements is rounded off by our safety bolt and double bolt
systems, which can be screw-mounted.
What’s more, the elements can be extended by 1000 mm,
which makes them very easy to install. Prices include fittings:
2 eye bolts and a round bolt lock. Posts are not included!
61
FEEDING GRIDS
FEEDING GRIDS FOR HORSES
By placing feed near the ground, horses can adopt their natural posture during long feeding
times. Particularly for groups of horses in free-stall housing, this allows all of the group’s horses
to eat at the same time.
SAFE FROM THE BEGINNING
Feeding grids have been in use for many years in cattle rearing and they are become increasingly popular in individual and free-stall stables. Feeding grids must be strictly fine-tuned to
suit the built and behaviour of the horses. The upper horizontal rod should be at least 2.10 m
high. Every animal is different, which is why the safety feeding grids from Growi® can also be
individually adapted. This allows you to amend the distance between the feeding openings
according to the size of the horses.
FEEDING GRIDS – SAFETY IN THE DETAILS
A risk with feeding grids is that a horse will put its head or leg through an opening and
become entangled in its neighbour’s feeding area. In order to effectively minimise this cause
of injury, Growi® safety feeding grids close off the intermediate space. This is a simple way of
preventing the horse’s neck or legs becoming entangled – and the severe neck injuries or
broken bones that this can cause.
SAFETY FEEDING GRID
Installation length (measured from hole centre to hole centre)
0 48.3 mm
0 26.9 mm
min. 300 mm
0 46.0 mm
2
Detail views
1
0 60.3 mm
62
0 102 mm
1. Hitch pins
2. T-clamps
INFORMATION
SAFETY FEEDING GRID 3000
The safety feeding grid 3000 consists of two 60.3 mm 0support tubes with
four adjustable suspension elements and five grid elements. The length of
the tubes is 2750 mm and the installation length, including the suspension
elements, is a maximum of 2950 mm. Price does not include posts.
Grid bars
1470 mm
1800 mm
SAFETY FEEDING GRID 4000
Installation length
3970 mm
3970 mm
No.
990312
990313
The safety feeding grid 5000 consists of two 60.3 mm 0support tubes with
four adjustable suspension elements and eight grid elements. The length of
the tubes is 4750 mm and the installation length, including the suspension
elements, is a maximum of 4950 mm. Price does not include posts.
Grid bars
1470 mm
1800 mm
GRID ELEMENTS
No.
990310
990311
The safety feeding grid 4000 consists of two 60.3 mm 0support tubes with
four adjustable suspension elements and six grid elements. The length of
the tubes is 3750 mm and the installation length, including the suspension
elements, is a maximum of 3950 mm. Price does not include posts.
Grid bars
1470 mm
1800 mm
SAFETY FEEDING GRID 5000
Installation length
2970 mm
2970 mm
Installation length
4970 mm
4970 mm
No.
990314
990315
The clearance width between each bar on the individual grid elements is
50 mm. Delivery includes 4 x clamps with two holes for installation on 60.3
mm 0 tubes.
Grid elements
Length of 1470 mm, width of 290 mm
Length of 1800 mm, width of 290 mm
No.
990073
990072
GATE OPTION
The safety feeding grids are delivered with a welded supporting
frame. The individual feeding grids are screwed onto this frame.
This gate option has adjustable eye bolts on one side in order
to attach hinges. On the other side there are two round bolts
for locking the gate. Because the gate is very heavy, a supporting roller is included in the delivery.
Surcharge for implementing as
pivoting gate design.
No.
990316
63
GATES & PANELS
MOUNTING CLAMPS FOR 0 102 MM POSTS
1
5
9
2
3
6
7
10
Mounting clamps for 0102 mm posts
Clamp with one bracket
Clamp with one bracket, 90°
Clamp with two brackets, at 90° angle from each
other
Clamp with two brackets, opposite each other
Clamp with two brackets, opposite each other, 90°
Clamp with three brackets
Clamp with three brackets, 90°
Clamp with four brackets
Clamp with bolt bracket
Clamp with two bolt brackets, double
Clamp with two bolt brackets, parallel
Clamp with bracket for drinking bowl
4
8
11
1
2
3
4
5
6
7
8
9
No.
990093
990082
990094
10
11
990095
990083
990096
990084
990097
990110
990111
990112
990114
MOUNTING CLAMPS FOR 0 76 MM POSTS
1
2
3
4
6
5
7
Mounting clamps for 076 mm posts
Clamp, no bracket
Clamp with one bracket, 90°
Clamp with two brackets, at 90° angle from each
other
Clamp with bolt bracket
Clamp with two brackets, opposite each other
Clamp with three brackets
Clamp with four brackets
1
2
3
No.
995400
996013
996014
4
5
6
7
996018
996015
996016
996017
Mounting clamps for 060 mm posts
Clamp with one bracket
Clamp with two brackets, opposite each other
Clamp with three brackets
Clamp with four brackets
Clamp with bolt bracket
1
2
3
4
5
No.
995410
995411
995412
995413
995414
Fastening accessories
Single screw-on part, with chain and bolt
Single screw-on part, with chain and bolt, horizontal
Single screw-on part, with nut and bolt
Bolt bracket for GV 3 , GV 4 and GV 5 bolt locks
1
2
3
4
No.
990070
990116
990117
990080
MOUNTING CLAMPS FOR 0 60 MM POSTS
1
5
2
3
4
INSTALLATION ACCESSORIES
1
2
3
4
4 Bolt bracket – in use with bolt
(bolt not
included)
64
ACCESSORIES
ROUND TUBULAR POSTS
3
2
1
Round Ø 60 mm post
1700 mm
2000 mm
1
Round Ø 76 mm post
1700 mm
2000 mm
2
995422
995423
3
990090
990091
990092
Round Ø 102 mm post
2000 mm
2500 mm
3000 mm
No.
995420
995421
INSTALLATION SLEEVES & COVERS
5
3
2
1
4
0 60 mm post
Installation sleeves, length of 500 mm
Cover for installation sleeves
1
0 76 mm post
Installation sleeves, length of 500 mm
Cover for installation sleeves
2
995424
995425
4
3
5
990099
990100
990101
1
No.
992001
2
992012
3
4
990134
993027
0 102 mm post
Floor plate for anchoring
Installation sleeves, length of 500 mm
Cover for installation sleeves
No.
995426
995427
BOLTS AND LOCKS
1
3
2
4
Bolts and Locks
M20 eye bolt, length of 180 mm,
includes nuts and washers
Fixed mounting element for GV elements,
includes M10 x 90 carriage bolts
Screw-on bolt system, includes U-bolts
Individual GV drop-ring lock, for retrofitting. The necessary holes must be drilled in the existing elements
at your location.
GATE ROLLERS
Gate rollers
Spring-loaded gate roller with plastic wheel
(Spring deflection: 60 mm. Wheel: 200 x 50 mm)
Includes U-bolts, total length approx. 800 mm
No.
5546
65
PADDOCKS
90° CONNECTOR
VARIABLE CROSS CONNECTOR
Size
1"
11/4"
11/2"
2"
No.
3400
3401
3402
3403
STRAIGHT CONNECTOR
No.
3423
3424
3425
3426
90° CORNER CONNECTOR
Size
1"
11/4"
11/2"
2"
No.
3407
3408
3409
3410
Size
1"
11/4"
11/2"
2"
No.
3427
3428
3429
3430
90° CORNER CONNECTOR II
90° ELBOW CONNECTOR
Size
1"
11/4"
11/2"
2"
66
Size
1"
11/4"
11/2"
2"
No.
3411
3412
3413
3414
Size
1"
11/4"
11/2"
2"
No.
3431
3432
3433
3434
TUBE CONNECTORS
TUBE CONNECTORS – STURDY AND SIMPLE
No need for thread cutting, bolting or welding – a hex key is the only tool required to establish
this robust and rigid connection.
The material used is high-quality, galvanised malleable iron.
The bolts exert a high clamping force which, in conjunction with the use of suitable steel tubes,
results in secure systems that can withstand loads. If the tube connectors are reused, new
adjusting screws should be used.
- Easy assembly – can be disassembled at any time
- Safe, stable and lightweight
- High load capacity
- Tube connectors available in sizes from 1" to 2"
Nominal Pipe
Size (NPS)
1"
1 1/4"
1 1/2"
2"
External Ø of tube
33.7 mm
42.4 mm
48.3 mm
60.3 mm
SIMPLE TO CONNECT
90° T-CONNECTOR
CROSS CONNECTOR
Size
1"
11/4"
11/2"
2"
No.
3435
3436
3437
3438
FLOOR ANCHORING
Size
1"
11/4"
11/2"
2"
No.
3439
3440
3441
3442
Size
1"
11/4"
11/2"
2"
No.
3443
3444
3445
3446
Size
1"
11/4"
11/2"
2"
No.
3447
3448
3449
3450
CROSS CONNECTOR II
Size
1"
11/4"
11/2"
2"
No.
3471
3472
3473
3474
WALL ANCHORING II
CROSS CONNECTOR III
Size
1"
11/4"
No.
3475
3476
67
PADDOCKS
CLAMPS
1
B
A
2
B
A
3
B
A
4
B
A
5
B
A
6
B
A
7
A
B
8
A
B
9
68
T-clamp, divided (A x B)
3/4" x 3/4"
1" x 3/4"
1" x 1"
1 1/4" x 1"
1 1/2" x 1"
1 1/4" x 1 1/4"
1 1/2" x 1 1/2"
2" x 1 1/2"
2" x 2"
Corner clamp (A x B)
2" x 2"
T-clamp, enclosed (A x B)
1" x 1"
1 1/2" x 1 1/2"
2" x 2"
T-clamp with double bolt (A x B)
2" x 1 1/2"
Double T-clamp (A x B)
1" x 1"
1 1/2" x 1 1/2"
2" x 2"
Cross clamp (A x B)
1 1/2" x 1 1/2"
2" x 2"
Perpendicular clamp (A x B)
1 1/4" x 1 1/4"
1 1/2" x 1 1/2"
2" x 1 1/2"
2" x 2"
Elbow clamp, 90° (A x B)
1" x 1"
1 1/2" x 1 1/2"
2" x 2"
Full saddle clamp
1 1/4"
1 1/2"
2"
1
No.
995201
995202
995203
995204
995205
995206
995207
995208
995209
2
995210
3
995211
995212
995213
4
995231
5
995214
995215
995216
6
99521
995218
7
995219
995220
995221
995222
8
995223
995224
995225
9
995232
995233
995234
TUBE CONNECTORS
CONNECTORS
1
2
3
4
5
Cross connector
1 1/2" x 1 1/4"
1 1/2" x 1 1/2"
1 1/2" x 2"
2" x 2"
U-bolt
1 1/4" x M10
1 1/2" x M10
2" x M10
Tube Connector
Internal, for 1 1/2" tube
Internal, for 2" tube
Galvanised threaded DIN 2440 tubes
only available in 6 m rods
1/2" x 2.65 mm x 6 m rod, per metre
3/4" x 2.65 mm x 6 m rod, per metre
1" x 2.65 mm x 6 m rod, per metre
1 1/4" x 2.65 mm x 6 m rod, per metre
1 1/2" x 2.65 mm x 6 m rod, per metre
2" x 2.65 mm x 6 m rod, per metre
Plastic end caps
Ribbed, 0 33.7 mm
Ribbed, 0 42.4 mm
ribbed, 0 48.3 mm
Ribbed, 0 60.3 mm
1
No.
995235
995236
995237
995238
2
995239
995240
995241
3
995242
995243
4
995226
995227
995228
995250
995229
995230
5
995246
995247
995248
995249
Nominal Pipe
Size (NPS)
3/4
1"
1 1/4"
1 1/2"
2"
Nominal Pipe Size
(NPS)
3/4
1"
1 1/4"
1 1/2"
2"
69
STABLE
PUSH ASIDE YOUR WORK
Mucking out is easier with our moveable separation walls.
You are just a few simple steps away from turning multiple individual
stables into one large space to clear. Working in the stables can get so
much quicker – and so easily!
6
FACILITIES FOR HORSES
NO MORE SLIPS
Rubber mats are a great way of preventing injuries
in stalls and paddocks. They provide horses with
stability and a good grip.
70
RUBBER MATS
PROTECTION AND COMFORT
There are lots of good reasons to invest in a BELMONDO rubber covering. They support the hoof mechanism and make
the animals more sure-footed. The appropriate level of softness prevents the tendons and joints from excessive strain.
The rubber also offers thermal insulation. This means that the horses are less exposed to the cold from below, which in
turn prevents instances of muscular disorders, rheumatism and stiffness. What’s more, the rubber provides sound insulation and reduces noise levels in the stables! Laying the mats is very simple, so it is quick and easy to install them yourself.
These hygienic, low-maintenance mats also dry off quickly. BELMONDO rubber coverings help to reduce costs. Using
these coverings significantly reduces straw usage, storage costs and the volume of waste.
BELMONDO® BASIC
The basic mat is a robust mat with the required level of softness. It is long-lasting, keeps its shape and
is suitable for animals. It is suitable for use in stables or in free-stall housing. As well as being non-slip
and providing a sure footing, it is also hygienic and reduces the quantity of bedding needed. The
hammer-blow texture on the surface has a non-slip effect yet is also easy to clean. Rubber’s natural
qualities also provide perfect insulation from radiative cooling. Not suitable for use with studs or pins.
The mats are made of vulcanised rubber. The top surface has a hammer-blow design and the underside has a ribbed profile. Thickness: 18 mm. Weight: approx. 20 kg per mat. Puzzle-cut on four sides.
Basic stall mat, 1000 x 1000 x 18 mm
Per mat
Pallet of 30, per mat
No.
4027
4027
BELMONDO® CLASSIC
BELMONDO® Classic ticks all the boxes for a high-quality floor covering for stables and free-stall housing, such as providing animals with a sure footing, being non-slip and saving on bedding – as well
as being hygienic and easy to clean. This mat can also even out slight irregularities in the underlying
floor.
The mats are made of vulcanised rubber and their wear-free surface layer has a horseshoe texture.
The underside has a ribbed profile.
Thickness: 18 mm. Weight: approx. 21 kg per mat. Puzzle-cut on four sides.
Classic stable mat, 1000 x 1000 x 18 mm
Per mat
Pallet of 30, per mat
No.
4029
4029
BELMONDO® TREND
BELMONDO® Trend provides comfort for the horse when lying down and perfectly accommodates its
musculo-skeletal system. In comparison to the solid BELMONDO® Classic, the BELMONDO® Trend is
designed to be softer and springier. The softer rubber compound also minimises the risk of slipping,
to prevent tendon damage. The BELMONDO® Trend is designed exclusively for use in horse stables.
Vulcanised rubber, horseshoe texture on the top surface, wear-free protective layer, underside with
raised nubs and rubber strips. Thickness: 28 mm. Weight: approx. 22 kg per mat. Puzzle-cut on four
sides.
Trend stable mat, 1000 x 1000 x 28 mm
Per mat
Pallet of 30, per mat
No.
4032
4032
71
RUBBER MATS
BELMONDO® KINGSIZE COVER
BELMONDO® Kingsize Cover – the seamless cover for large areas
Surface: hammer-blow texture. Underside: hammer-blow texture. Thickness: 15 mm. The Kingsize
Cover is made to measure, in line with your individual measurements: 2620/3480/4400/5250 mm
x 2500 to 6000 mm (in intervals of 100 mm). Straight edge. For horseshoes without studs or pins.
Weight per m2: 17 kg. Please note that the cover will be delivered in one piece and the necessary
transport provisions must be available for its receipt.
Belmondo Kingsize Cover
per m2
Widths: 2620/3480/4400/5250 mm
Lengths: 2500–6000 mm, in intervals of 100 mm
No.
4046
BELMONDO® RODEO
The Rodeo rubber mat provides the horse stall with impact protection. Its shock-absorbing qualities
prevent hip and leg injuries. It also reduces noise levels in your stables. The rubber mat can be easily
cut to size and its texture is reminiscent of wooden planks. The underside of the Rodeo mat has a
ribbed pattern.
The rubber mat can either be screwed into place or the entire mat can be glued down.
Belmondo Rodeo Rubber Mat
Thickness: approx. 11 mm. Dimensions: 1300 x 3500 mm.
Weight: approx. 14 kg per m2. Price per mat
No.
4014
BELMONDO® PADDOCK
BELMONDO® Paddock mat, made of vulcanised virgin rubber. The top surface features a diamond
pattern, the underside has raised nubs with a thickness of 5 mm. The appropriate level of softness
supports the hoof mechanism and protects the tendons and joints. It is easy to clean, weather-resistant and freeze-proof, as well as being very durable and easy to install. Dimensions: 1000 x 1000 mm.
Thickness: 24 mm. Weight: 23 kg. Puzzle-cut on four sides.
Paddock mat, 1000 x 1000 x 24 mm
Per mat
Pallet of 30, per mat
No.
4033
4033
BELMONDO® HORSEWALKER
BELMONDO® Horsewalker, the custom-made rubber cover for your horsewalker. BELMONDO® Horsewalker can conduct electricity, offers improved grip for wet conditions and is resistant to UV and
ozone damage. Suitable for any horsewalker, provided that there is a firm substrate such as concrete,
asphalt, etc.
Surface: diamond texture with wear-free surface layer. Underside: multi-square texture (3 mm)
Thickness: 21 mm. Dimensions: made-to-measure using modern water jet cutting machines. For all
types of horseshoe. Suitable for vehicles.
To calculate a price, we will need a ground plan of your
horsewalker. Price and delivery time provided on request.
72
BELMONDO
BELMONDO® MATS – MINIMISING COSTS AND YOUR WORKLOAD,
SO YOU HAVE MORE TIME FOR THE HORSES
BELMONDO mats are impressively easy to lay due to their handy size and puzzle-cut connecting edges.
This allows you to simply remove the mats when cleaning or replacing them – or if you are moving stables. They are very
durable, long-lasting and recyclable. The mats also significantly reduce the quantities of bedding needed, which in turn
reduces the volume of waste. Another advantage is that they are easy to clean. Apart from ‘Walkway’, the mats are all
suitable for vehicles.
Certified quality from Germany: In order to provide constant quality assurance, we work together with the DLG (German
Agricultural Society, www.dlg.org) to test many of our products. All BELMONDO® products are have been awarded the
Austrian hallmark for animal welfare.
BELMONDO® WALKWAY
The stable aisle can often present slip hazards and pose the problem of unnecessary noise. The
BELMONDO Walkway provides a solution to these problems. It muffles the clatter of hooves and
provides a non-slip surface. The same is, of course, true of the washing and grooming area. What’s
more, the mat is also very easy to sweep. Please note that the BELMONDO Walkway is not suitable for
heavy vehicles! BELMONDO Walkway is also very well suited to use in horse trailers and transporters.
The mats are made of vulcanised rubber. The top surface has a horseshoe texture and the underside
has a ribbed profile. Thickness: 11 mm. Weight: approx. 13.5 kg per mat. Puzzle-cut on four sides. For
horseshoes without studs or pins.
Walkway mat, 1000 x 1000 x 11 mm
Per mat
Pallet of 40, per mat
No.
4026
4026
BELMONDO® WALK PRO
The BELMONDO Walk Pro rubber mats are designed to be laid in the stable aisle. The appealing mosaic design on the top surface provides improved grip for wet conditions.
Underside: ribbed profile. Dimensions: 1000 x 1000 mm. Puzzle cut on all sides. For all types of horseshoe. Suitable for vehicles.
Walk Pro mat, 1000 x 1000 x 16 mm
Per mat
Pallet of 30, per mat
No.
4047
4047
BELMONDO® FOR DRAINS & GUTTERS
1
2
Special BELMONDO Walkpro and BELMONDO Paddock mat pieces to fit sections with drains and
gutters.
Dimensions:
BELMONDO gutter: 167 x 1000 mm
BELMONDO drain: 400 x 400 mm
No.
Belmondo gutter, per mat
Belmondo drain, per mat
1
2
4048
4049
73
RUBBER MATS
R10 ROLL OF MATTING
The R10 roll of matting with fabric insert has a thickness of 10 mm and a weight of 10 kg/m2. The top
surface has a non-slip texture and the underside has a 1.5 mm ribbed profile. Can also be used as kick
protection for the stable wall or as a rubber cover for your horse transporter.
R10 roll of matting with fabric insert
1650 mm wide, per m2
2000 mm wide, per m2
No.
4043
4045
K20 EN RUBBER MAT
The Growi® K20 EN rubber mat is made of reliable, robust solid rubber. It has a thickness of 20 mm
and a weight of 18 kg/m2. Simply economical – easy to lay, to fasten and to clean. Animal-friendly
hammer-blow texture on the top surface, raised nubs on the underside. A durable and simple alternative.
Growi® K20 EN rubber mat
1000 x 1300 mm
1000 x 1500 mm
1000 x 2000 mm
1000 x 3500 mm
No.
4006
4008
4012
4013
VERLEGEANLEITUNG
VERY EASY TO LAY
Whether rolling out matting or fitting together puzzle-cut edges, laying our mats is easy and straightforward.
On our website, we have compiled a few tips for you about laying mats:
®
www.growi.de/gummimatten-tipps
BELMONDO Basic, Classic, Trend, Walkway, Walkpro,
Paddock
Voraussetzungen:
PREREQUISITES:
Untergrund:
Substrate: (Please
consult us regarding woodenMatten:
floors!)
gleichmäßige Temperatur: • befestigt
• firm • clean • sauber und trocken
and dry • no holes • any irregularities
must be evened out • maximum incline
mind. 5° C bis max. 30° C • keine Löcher
of 2% (paddock:
at least 1%, maximum of 2%) (Entsprechend lagern!)
• Unebenheiten ausgleichen
Mats:
• max. 2 % Gefälle (Paddock: mind. 1 -­ max. 2 %)
Constant temperature
of at least 5°C to a maximum of 30°C (store accordingly!)
Bei Holzboden bitte Rücksprache halten!
Das benötigen
Sie:need:
What
you will
Messen:
Measuring:
oder
or
Schneiden:
Cutting:
Markieren:
Marking:
oder
or
oder
or
Puzzle verbinden:
Joining
the puzzle pieces:
oder
or
!
BELMONDO® Matten können an der Puzzleverbindung vielfältig kombiniert werden:
Kreuz-­Verbund:
T-­Verbund:
A
Remove the puzzle edge that is
adjacent to the wall
A
Befahrbarkeit
BELMONDO® Matten (außer Walk-­
way) sind befahrbar mit üblichem "!%-­
tor, mit zugelassener Luftbereifung bei vorgeschriebenem Luftdruck bis max. 4 bar. (Beachten: mit notwendiger Um-­
sicht fahren und in großen Radien lenken!)
Adjust the mats – cut the mats to
(gute Verwertbarkeit von Reststücken)
size at the edge if required
Um Flüssigkeiten (Urin) zu binden, wird in der Box immer etwas saugfähige Einstreu benötigt. Wir empfehlen auch im Laufstall eine Minimaleinstreu.
!
74
1
Lay and join the mats to suit your requirements
Trennwände, Steher etc. nicht auf den Matten montieren!
(Stabilität ist nicht gewährleistet! Matten nicht klemmen!) Zur Wand liegende Puzzle entfernen
REGUPOL
REGUPOL® STABLE MAT
REGUPOL®® stable mat, measuring 1000 x 1000 mm (length x width) with a weight of 36 kg/m2. It
has a thickness of 50 mm, 15 mm of which is the height of the raised nubs on the underside. These
mats allow water and urine to pass through them. In stables, they can reduce the quantity of bedding
required by up to three quarters. For horses with respiratory diseases, it is possible to use no bedding
at all. For use as a floor covering in stables, wash stalls, washing areas, open stables and free-stall
housing with concrete substrate, an inclined floor and drainage. Requires regular cleaning. Available
in reddish brown or black.
Stable mat, 1000 x 1000 x 50 mm
Per mat
Pallet of 20, price per mat
No.
3037
3037
REGUPOL® FLEXIBLE TILES
REGUPOL® flexible tiles allow water and urine to pass through them. The tiles are laid loose on an
even, freezeproof, crushed-stone substrate that is 25–40 cm deep and has edging. A footing layer is
not necessary. The tiles can be used in open stables and free-stall housing where there is an open/
porous crushed-stone substrate, as well as in wash stalls and stable aisles.
Available in reddish brown or black.
REGUPOL® INTERLOCKING
PAVING
Flexible tiles, 1000 x 500 x 43/30 mm
1000 x 500 x 30 mm, 27 kg/m2, per m2, for ponies
Pallet of 30, price per m2, for ponies
No.
4038
4038
1000 x 500 x 43 mm, 38 kg/m2, per m2
Pallet of 30, price per m2
3038
3038
REGUPOL® interlocking paving stones measure 200 x 160 mm (L x W) and have a thickness of 43
mm. The paving is permeable and extremely resilient. It can even be driven on by light agricultural
machines. Additional advantages include the fact it is an extremely quiet surface that is easy to clean.
It also has a long service life. The paving is laid on an even, freezeproof, crushed-stone base with
edging. It is suitable as a floor covering for stable aisles, wash stalls, wash areas (outdoors), paddocks/
roaming areas, horse walkers and paths. Available in reddish brown or black.
Interlocking paving, 200 x 160 x 43 mm
per m2
No.
3033
RUBBER RING MAT
Rubber ring mat, 1500 x 1000 mm (L x W), thickness of 23 mm, weight of 16.5 kg. Made of vulcanised
virgin rubber. Mat suitable for a variety of uses in wet environments. Permeable to water if the area
beneath it has drainage. Soft, non-slip, absorbs sound. Can be used as impact protection in the stable
or in the washing area. Not suitable for laying in the horse stable. Diameter of rings: approx. 20 mm.
Rubber ring grid mat, 1500 x 1000 x 23 mm
Per mat
Ring mat connector, per piece
No.
4035
4036
75
FACILITIES FOR HORSES
SAFETY WITH EVERY STEP: PADDOCK GRID
Safety begins with a firm footing. Our paddock grids are the perfect non-slip
mat for horses – whether used in the entire outdoor area or just for the feeding
area. Simply lay them on a firm surface and muddy ground will become a thing
of the past.
76
PADDOCK TILES
PADDOCK TILES
These tiles make it possible to reinforce or seal the ground surface. Their applications in the area of animal husbandry
include paddocks, riding arenas, roaming and feeding areas. These tiles are also tried and tested for use in areas for storage, pitches and parking, as well as for constructing tracks or paths. The advantages speak for themselves: high level of
stability due to thick cell walls (approx. 5 mm); quick to lay, easy to manipulate and adapt at the edges; sturdy connectors;
minimal sealing i.e. quick draining; freezeproof and UV-resistant; laying large areas reduces the risk of sinking; non-slip
surface.
PADDOCK TILES
Dimensions: 500 x 400 x 40 mm (length x width x height)
Size: approx. 0.2 m2
Weight: 2.1 kg/tile
Colour: black, recycled material
Quantity required: approx. 5 tiles per m2, 20 m2 per pallet
Paddock tiles (price per m2)
per m2
With the purchase of 1 pallet = 20 m2
With the purchase of 3 pallets = 60 m2
With the purchase of 6 pallets = 120 m2
No.
3097
3097
3097
3097
EQUIGROUND PADDOCK GRID
Footing layer
Equiground filled
with fine grit
Fine grit
Coarse crushed
stone
Drainage
The sturdy grid structure of the Equiground layer separation
system distributes the point load of the hooves over a large area.
This prevents the footing layer and the substrate from mixing and
compacting. The ground remains permeable. Equiground is made
of high-quality, impact-resistant plastic (PP). Equiground is 100%
recyclable and does not pollute the groundwater. The advantages:
you can lay the grid yourself and it is easy to handle; the grid is
highly impact-resistant despite the minimised footing layer; good
water drainage; environmentally-friendly recycled plastic (HDPEPP) i.e. no disposal problems.
EQUIGROUND PADDOCK GRID
Dimensions: 640 x 330 x 38 mm
5.45 tiles per m2
Colour: black
Hook connection system
30.83 m2 per pallet
Equiground paddock grid (price per m2)
per m2
With the purchase of 1 pallet = 30.83 m2
With the purchase of 3 pallets = 92.49 m2
With the purchase of 6 pallets = 184.98 m2
No.
3080
3080
3080
3080
77