Porsche-356---912-engineparts-and-machining

Porsche-356---912-engineparts-and-machining
Ahnendorp B.A.S.
Motorteile &-bearbeitung Porsche und VW
Industriestrasse 2
46419 Isselburg
Germany
Fon: +49 2874 4047
Fax: +49 2874 1816
eMail: info(at)ahnendorp.com
Internet www.ahnendorp.com
09/2016
Table of content
Porsche 356 / 912 engineparts and machining ................................................................................................................................... 3
Piston and Cylinder Sets........................................................................................................................................................... 3 - 4
Piston Ring Sets............................................................................................................................................................................. 5
Camshafts and Supplies................................................................................................................................................................. 6
Gasket Sets..................................................................................................................................................................................... 7
Bearing Sets ................................................................................................................................................................................... 8
Mainbearings 356 A/B .................................................................................................................................................... 8 - 9
Mainbearings 356 C/SC 912 ....................................................................................................................................... 10 - 11
Rod Bearings 356 / 912 ...................................................................................................................................................... 12
Valves (Sets)................................................................................................................................................................................ 13
Heads and Supplies .............................................................................................................................................................. 14 - 17
Carburettors, Manifolds, Supplies........................................................................................................................................ 18 - 19
Crankshafts and Rods........................................................................................................................................................... 20 - 22
Other Engine Parts................................................................................................................................................................ 23 - 24
Oil Cooling and Supplies ..................................................................................................................................................... 25 - 26
Flywheels and Clutches........................................................................................................................................................ 27 - 28
Exhausts................................................................................................................................................................................ 29 - 30
Machining............................................................................................................................................................................. 31 - 38
Other Parts ................................................................................................................................................................................... 39
Porsche-356---912-engineparts-and-machining
09/2016
Porsche 356 / 912 engineparts and machining > Piston and Cylinder Sets
Bored and honed cylinders Porsche 356 original, now 86,00mm
Model: 01205P
Bored and honed cylinders Porsche 356 original, now 86,00mm.
Set for one engine.
In exchange or to sell without exchange.
For use with 86mm high performance forged pistons.
Cast iron original.
Please contact us for mor informations.
Cylinder Spacers Porsche 356 0,5mm
Model: 10029P
Cylinder spacers Porsche 356 0,5mm, set for one engine
Cylinder Spacers Porsche 356 1,00mm
Model: 10030p
Cylinder spacers Porsche 356 1,00mm, set for one engine
Piston / Cylinder Porsche 356 - Porsche 912 Mahle Nikasil
Model: 01193P
Piston and Cylinder set for all Porsche 356 engines, 82,50 mm, Alu-Nikasil Cylinder version, original Mahle.
Set like standard Porsche 912 engines.
Piston / Cylinder Porsche 356 86,10mm with B.A.S. forged pistons
Model: 01196P
Piston and Cylinder set for Porsche 356, 86,10 mm big-bore set, B.A.S. forged pistons, including machining your delivered cast iron clinders, 1720ccm
For machining we need your cylinders!
Piston / Cylinder Porsche 356 86mm Alu-Biral 1720ccm
Model: 01197P
Piston and Cylinder set for Porsche 356, 86,00 mm big-bore set, 1720ccm, cast pistons and "Alu-Biral" cylinder.
Piston / Cylinder Porsche 356 86mm cast iron
Model: 01200P
Piston and Cylinder set for Porsche 356, 86,00 mm big-bore set, 1720ccm, cast pistons and "cast iron" cylinder
Piston / Cylinder Porsche 356 86mm with B.A.S. forged pistons
Model: 01195P
Piston and Cylinder set for Porsche 356, 86,00 mm big-bore set, B.A.S. "forged" pistons, including machining your delivered cast iron clinders, 1720ccm
For machining we need your cylinders!
3
Porsche-356---912-engineparts-and-machining
09/2016
Porsche 356 / 912 engineparts and machining > Piston and Cylinder Sets
Piston / Cylinder Porsche 356 86mm, forged
Model: 01198P
Piston and Cylinder set for Porsche 356, 86,00 mm big-bore set, forged pistons, new cylinder, 1720ccm
Piston / Cylinder Porsche 356 912 B.A.S. 86,20mm forged
Model: 01201P
Piston and Cylinder set for Porsche 356, 86,20 mm big-bore set, forged B.A.S. pistons, including machining your delivered cast iron clinders, 1720ccm
For machining we need your cylinders!
Piston / Cylinder Porsche 356 912 B.A.S. 86,50mm forged - 1750ccm
Model: 01202P
Piston and Cylinder set for Porsche 356, 86,20 mm big-bore set, forged B.A.S. pistons, including machining your delivered cast iron clinders, 1750ccm
For machining we need your cylinders!
Piston / Cylinder Porsche 356 Mahle 82,5mm
Model: 01190P
Piston and Cylinder set for all Porsche 356 engines, 82,50 mm (for use 60 HP engines machining of head´s required)
4
Porsche-356---912-engineparts-and-machining
Porsche 356 / 912 engineparts and machining > Piston Ring Sets
Piston ring sets for Porsche 356 - 82,5mm
Model: 51190P
Piston ring sets for Porsche 356, 82,5mm.
Set for one engine.
Please add size of your old rings!
Set for one engine.
Piston ring sets for Porsche 356 and Porsche 912
Model: 51112P-A
We could deliver all piston ring sets for porsche 356 and porsche 912 pistons.
Please contact us that we can offer them.
The dimensons and hight of the rings are needed!
Piston ring sets for Porsche 912- 82,5mm Nikasil
Model: 51193P
Piston ring sets for Porsche 356 Porsche 912, 82,5mm Nikasil.
Set for one engine.
Please add size of your old rings!
Set for one engine.
5
09/2016
Porsche-356---912-engineparts-and-machining
Porsche 356 / 912 engineparts and machining > Camshafts and Supplies
Cam Follower for Porsche 356
Model: 04718P
Cam Follower Porsche 356, set for one engine, to use with stock and our sport racing cams
Cam Gear Porsche 356
Model: 04403P
Cam gear Porsche 356
Camshaft Porsche 356 B.A.S. 304 degree
Model: 04408P
Camshaft Porsche 356, B.A.S. version 304 degree, replacement of original camshaft
Camshaft Porsche 356 B.A.S. 310 degree
Model: 04406P
Camshaft Porsche 356, B.A.S. version 310 degree, low torque, for street use
Camshaft Porsche 356 B.A.S. 328 degree
Model: 04407P
Camshaft Porsche 356, B.A.S. version 328 degree, full racing, to use with two carburettors 44 IDF and open exhaust
Camshaft Porsche 356 Schleicher 316 degree
Model: 04400P
Camshaft Porsche 356 Schleicher 316 degree, lift 8,5mm, sport version for street use.
Achtung:
Ventilfeder-Freigang bei max. Ventilhub sowie Distanz Ventile/Kolben vor und nach Überschneidung O.T. prüfen.
Camshaft Porsche 356 Schleicher 324 degree
Model: 04401P
Camshaft Porsche 356 Schleicher 324 degree, lift 9,4mm, full racing, to use with two carburettors 44 IDF and open exhaust.
Achtung:
Ventilfeder-Freigang bei max. Ventilhub sowie Distanz Ventile/Kolben vor und nach Überschneidung O.T. prüfen.
6
09/2016
Porsche-356---912-engineparts-and-machining
Porsche 356 / 912 engineparts and machining > Gasket Sets
Case Gasket Set Porsche 356
Model: 70377P
Case Gasket Set Porsche 356, high quality brand, set for one engine
Exhaust Gasket Set Porsche 356
Model: 08068P
Exhaust Gasket Set Porsche 356, set for one engine
Head Gasket Set Porsche 356
Model: 70376P
Head Gasket Set Porsche 356, high quality brand, set for both heads
7
09/2016
Porsche-356---912-engineparts-and-machining
Porsche 356 / 912 engineparts and machining > Bearing Sets > Mainbearings 356 A/B
Mainbearing 356 A/B -0,25/+0,25
Model: 05213P
Mainbearing set Porsche 356 A/B -0,25 crank /+0,25 case
Mainbearing 356 A/B -0,25/+0,50
Model: 05220P
Mainbearing set Porsche 356 A/B -0,25 crank /+0,50 case
Mainbearing 356 A/B -0,50/+0,25
Model: 05214P
Mainbearing set Porsche 356 A/B -0,50 crank /+0,25 case
Mainbearing 356 A/B -0,50/+0,50
Model: 05221P
Mainbearing set Porsche 356 A/B -0,50 crank /+0,50 case
Mainbearing 356 A/B -0,75/+0,25
Model: 05218P
Mainbearing set Porsche 356 A/B -0,75 crank /+0,25 case
Mainbearing 356 A/B -0,75/+0,50
Model: 05222P
Mainbearing set Porsche 356 A/B -0,75 crank /+0,50 case
Mainbearing 356 A/B Standard/+0,25
Model: 05212P
Mainbearing set Porsche 356 A/B standard crank /+0,25 case
Mainbearing 356 A/B Standard/+0,50
Model: 05219P
Mainbearing set Porsche 356 A/B standard crank /+0,50 case
8
09/2016
Porsche-356---912-engineparts-and-machining
Porsche 356 / 912 engineparts and machining > Bearing Sets > Mainbearings 356 A/B
Mainbearing Porsche 356 A/B -0,25/Standard
Model: 05205P
Mainbearing set Porsche 356 A/B -0,25 crank /standard case
Mainbearing Porsche 356 A/B -0,50/Standard set
Model: 05206P
Mainbearing set Porsche 356 A/B -0,50 crank /standard case
Mainbearing Porsche 356 A/B Standard/Standard set
Model: 05204P
Mainbearing set Porsche 356 A/B standard crank /standard case
9
09/2016
Porsche-356---912-engineparts-and-machining
09/2016
Porsche 356 / 912 engineparts and machining > Bearing Sets > Mainbearings 356 C/SC 912
Mainbearing 356 C/SC -0,25/+0,25
Model: 05210P
Mainbearing set Porsche 356 C/SC -0,25 crank / +0,25 case
Mainbearing 356 C/SC -0,25/+0,50
Model: 05260P
Mainbearing set Porsche 356 C/SC -0,25 crank / +0,50 case
Mainbearing 356 C/SC -0,25/Standard
Model: 05202P
Mainbearing set Porsche 356 C/SC -0,25 crank /standard case
Mainbearing 356 C/SC -0,50/+0,25
Model: 05211P
Mainbearing set Porsche 356 C/SC -0,50 crank / +0,25 case
Mainbearing 356 C/SC -0,50/+0,50
Model: 05261P
Mainbearing set Porsche 356 C/SC -0,50 crank / +0,50 case
Mainbearing 356 C/SC -0,50/Standard
Model: 05203P
Mainbearing set Porsche 356 C/SC -0,50 crank /standard case
Mainbearing 356 C/SC -0,75/+0,25
Model: 05217P
Mainbearing set Porsche 356 C/SC -0,75 crank / +0,25 case
Mainbearing 356 C/SC -0,75/Standard
Model: 05208P
Mainbearing set Porsche 356 C/SC -0,75 crank /standard case
10
Porsche-356---912-engineparts-and-machining
09/2016
Porsche 356 / 912 engineparts and machining > Bearing Sets > Mainbearings 356 C/SC 912
Mainbearing 356 C/SC Standard/+0,25
Model: 05209P
Mainbearing set Porsche 356 C/SC standard crank / +0,25 case
Mainbearing 356 C/SC Standard/+0,50
Model: 05215P
Mainbearing set Porsche 356 C/SC standard crank / +0,50 case
Mainbearing 356 C/SC Standard/+0,75
Model: 05216P
Mainbearing set Porsche 356 C/SC standard crank / +0,75 case
Mainbearing 356 C/SC Standard/Standard
Model: 05200P
Mainbearing set Porsche 356 C/SC standard crank /standard case
11
Porsche-356---912-engineparts-and-machining
Porsche 356 / 912 engineparts and machining > Bearing Sets > Rod Bearings 356 / 912
Rod Bearing Porsche 356 912 -0,50
Model: 06060P
Rod bearing set 356 -0,50
Rod Bearing Porsche 356 912 -0,75
Model: 06061P
Rod bearing set 356 -0,75
Rod Bearing Porsche 356 912 -1,00 mm
Model: 06095P
Rod bearing set 356 -1,00 mm
Rod Bearing Porsche 356 912 Standard
Model: 06040P
Rod bearing set 356 standard
Rod Porsche Bearing 356 912 -0,25
Model: 06050P
Rod bearing set 356 -0,25
12
09/2016
Porsche-356---912-engineparts-and-machining
Porsche 356 / 912 engineparts and machining > Valves (Sets)
Exhaust Valves Porsche 356 31mm
Model: 09408P
Exhaust valves Porsche 356 31mm, 1 groove version, set for one engine
Exhaust Valves Porsche 356 34mm
Model: 09407P
Exhaust valves Porsche 356 34mm, 3 groove version, set for one engine
Exhaust Valves Porsche 356 34mm Soda Filled TRW
Model: 09406P
Exhaust valves Porsche 356 34mm, 3 groove version, set for one engine
Exhaust Valves Porsche 356 35mm Tuning
Model: 09409P
Exhaust valves Porsche 356 35mm, 1 groove version, 8mm Tuning, set for one engine
Nur für von uns vorbereitete Zylinderköpfe zu verwenden.
Intake Valves Porsche 356 38mm
Model: 09400P
Intake valves Porsche 356 38mm, 1 groove version, set for one engine
Intake Valves Porsche 356 38mm
Model: 09401P
Intake valves Porsche 356 38mm, 3 groove version, set for one engine
Intake Valves Porsche 356 40mm
Model: 09402P
Intake valves Porsche 356 40mm, 1 groove version, set for one engine, original Porsche
Intake Valves Porsche 356 41mm Tuning
Model: 09403P
Intake valves Porsche 356 41mm, 1 groove version, 8mm Tuning, set for one engine
Nur für von uns vorbereitete Zylinderköpfe zu verwenden.
13
09/2016
Porsche-356---912-engineparts-and-machining
Porsche 356 / 912 engineparts and machining > Heads and Supplies
Cam follower Porsche 356
Model: 04718P
Cam follower set Porsche 356, set for one engine.
For stock and our special camshafts.
Cylinder Heads Porsche 356 38/31mm Exchange, set
Model: 30073P
Cylinder heads Porsche 356 38/31mm in exchange, spark plugs threads are milled out and welded.
To repair or prevent future cracks.
This is a great possibility to machine them for long thread spark plugs without any additional costs.
Delivery with new valves (38/31mm).
With new valve guides, new valve seats, heads on both sides resurfaced.
Set for one engine = 2 cylinder heads for exchange.
If we need oversize guides for your delivered heads, additional costs possible.
Cylinder Heads Porsche 356 38/34mm Exchange, set
Model: 30074P
Cylinder heads Porsche 356 38/34mm in exchange, spark plugs threads are milled out and welded.
To repair or prevent future cracks.
This is a great possibility to machine them for long thread spark plugs without any additional costs.
Delivery with new valves (38/34mm).
With new valve guides, new valve seats, heads on both sides resurfaced.
Set for one engine = 2 cylinder heads for exchange.
If we need oversize guides for your delivered heads, additional costs possible.
Cylinder Heads Porsche 356 40/31mm Exchange, set
Model: 30075P
Cylinder heads Porsche 356 40/31mm in exchange, spark plugs threads are milled out and welded.
To repair or prevent future cracks.
This is a great possibility to machine them for long thread spark plugs without any additional costs.
Delivery with new valves (40/31mm).
With new valve guides, new valve seats, heads on both sides resurfaced.
Set for one engine = 2 cylinder heads for exchange.
If we need oversize guides for your delivered heads, additional costs possible.
Cylinder Heads Porsche 356 41/35mm Exchange, set
Model: 30072P
Tuning cylinder heads Porsche 356 41/35mm in exchange, spark plugs threads are milled out and welded.
To repair or prevent future cracks.
This is the great possibility to machine them for long thread spark plugs without any additional costs.
Ports corrected by hand milling.
Delivery with larger 41/35mm and lighter 8mm tuning valves, springs and lighter spring retainers.
This heads are to use only with 86mm tuning piston and cylinders!
With new special valve guides, new bigger valve seats, heads on both sides resurfaced.
Set for one engine = 2 cylinder heads for exchange.
Including new springs, heads are ready to fit (must be cleaned before!!!!).
If we need oversize guides for your delivered heads, additional costs possible.
Cylinder Spacers Porsche 356 0,5mm
Model: 10029P
Cylinder spacers Porsche 356 0,5mm, set for one engine
14
09/2016
Porsche-356---912-engineparts-and-machining
Porsche 356 / 912 engineparts and machining > Heads and Supplies
Cylinder Spacers Porsche 356 1,00mm
Model: 10030p
Cylinder spacers Porsche 356 1,00mm, set for one engine
Exhaust Gasket Set Porsche 356
Model: 08068P
Exhaust Gasket Set Porsche 356
Head Gasket Set Porsche 356
Model: 70376P
Head Gasket Set Porsche 356, quality brand, set for both heads
Nut Valve Adjusting Screw Porsche 356
Model: 04754P
Nut valve adjusting screw Porsche 356, 1 piece
Push Rods Alu Porsche 356
Model: 04660P
Alum. pushrods set Porsche 356, very light, overlenght to be cut on the right size
Push Rods Alu Porsche 356 Original
Model: 04661P
Aluminium pushrods set Porsche 356 Original, set for one engine = 8 pc
Pushrod Tubes Porsche 356 stainlees steel
Model: 10066P
Pushrod Tubes Porsche 356, set for one engine stainlees steel
Regrinding rockers Porsche 356
Model: 80131P
Regrinding rockers Porsche 356, set for one engine.
Only possible if your rockers not to much worn.
15
09/2016
Porsche-356---912-engineparts-and-machining
Porsche 356 / 912 engineparts and machining > Heads and Supplies
Rocker Exhaust Porsche 356, Long
Model: 04773P
Rocker exhaust Porsche 356, long, 1 piece.
Please see machining of your ones too!
Rocker Exhaust Porsche 356, Short
Model: 04772P
Rocker exhaust Porsche 356, short.
Please see machining of your ones too!
Rocker Inlet Porsche 356
Model: 04774P
Rocker inlet Porsche 356, 1 piece.
Please see machining of your ones too!
Rocker Shaft Porsche 356 Exhaust, Short
Model: 04765P
Rocker shaft Porsche 356 exhaust, short, 1 piece
Rocker Shaft Porsche 356 Inlet, Long
Model: 04764P
Rocker shaft Porsche 356 inlet, long, 1 piece
Spark Plug NGK long thread - long electrode Porsche 356 / Porsche 912
Model: 26025LGW-LE
Spark plug NGK long thread - long electrode Porsche 356 / Porsche 912, one piece, for welded exchange heads from us
Spark Plug NGK long thread - short electrode Porsche 356 / Porsche 912
Model: 26025LGW-KE
Spark plug NGK long thread - short electrode Porsche 356 / Porsche 912, one piece, for welded exchange heads from us
Spark Plug NGK short thread - long electrode Porsche 356 / Porsche 912
Model: 26025P-KGW-LE
Spark plug NGK short thread - long electrode Porsche 356 / Porsche 912, one piece
16
09/2016
Porsche-356---912-engineparts-and-machining
Porsche 356 / 912 engineparts and machining > Heads and Supplies
Spark Plug NGK short thread - short electrode Porsche 356 / Porsche 912
Model: 26025P-KGW-KE
Spark plug NGK short thread - short electrode Porsche 356 / Porsche 912, one piece
Valve Adjusting Screw Porsche 356
Model: 04750P
Valve Adjusting Screw Porsche 356, 1 piece
Valve Collets Porsche 356 HD German 1 grove, Set
Model: 04695P
Valve Collets Porsche 356 HD German, Set, set for one engine, 1 grove.
For valves 38/31mm.
Valve Collets Porsche 356 HD German, Set
Model: 04694P
Valve Collets Porsche 356 HD German, Set, set for one engine
Valve Cover Gasket Set Porsche 356
Model: 10013P
Valve cover gasket set Porsche 356, for one engine
Valve Spring Set Porsche 356
Model: 04540P
Valve spring set Porsche 356
Valve Steam Seals Porsche 356
Model: 04297P
Valve stam seals, set of 4.
17
09/2016
Porsche-356---912-engineparts-and-machining
Porsche 356 / 912 engineparts and machining > Carburettors, Manifolds, Supplies
Add cost for Mesh Design Filter Weber IDF 84mm Set (2 p/c)
Model: 82000
Add cost for Mesh Design Filter Weber IDF if you buy a new caruburettor set from us, hight 84mm Set (2 p/c).
Bring up the classic style to your engine!
Electric Fuelpump Pierburg Porsche 356 12V
Model: 28057
Electric fuelpump Pierburg Porsche 356, 0,3-0,4 Bar, 12 Volt.
Emergency switch off relay Porsche 356
Model: 28058
Emergency switch off relay Porsche 356, 12 Volt.
K+N Air Filter Cleaner
Model: 27100
K+N Air Filter Cleaner
K+N Air Filter Oil
Model: 27090
K+N Air Filter Oil
Manifolds Adapter Weber IDF 40 Porsche 356
Model: 32350
Manifolds adapter Weber IDF 40 for Porsche 356, set including gaskets and screws, for one engine.
To fit 40 IDF on solex manifolds.
Manifolds Weber IDF 40 Porsche 356
Model: 28008P
Manifolds Weber IDF 40 for Porsche 356, set including gaskets and screws, for one engine
Manifolds Weber IDF 44 Porsche 356
Model: 28009P
Manifolds Weber IDF 44 for Porsche 356, set including gaskets and screws, for one engine
18
09/2016
Porsche-356---912-engineparts-and-machining
Porsche 356 / 912 engineparts and machining > Carburettors, Manifolds, Supplies
Synchron Tester Porsche 356
Model: 28062
Synchron tester Porsche 356 to calibrate the carburettors
Weber Carburettor Set Porsche 356 IDF 40 / Porsche 912
Model: 32286P
Weber carburettor set Porsche 356 IDF 40, set for one engine, including air filters and manifolds.
Configured for your engine details and to use with original Porsche linkage.
Weber Carburettor Set Porsche 356 IDF 40 / Porsche 912
Model: 32192P
Weber carburettor set Porsche 356 IDF 40, set for one engine without air filters and manifolds.
Configured for your engine details and to use with original Porsche linkage.
Weber Carburettor Set Porsche 356 IDF 44 / Porsche 912
Model: 32296P
Weber carburettor set Porsche 356 IDF 44, set for one engine, including air filters and manifolds.
Configured for your engine details and to use with original Porsche linkage.
Please notice:
Manifolds are smaller and must be machine with your heads, we can do this aditional, please see Tuning 2 machining for more informations!
Weber Carburettor Set Porsche 356 IDF 44 / Porsche 912
Model: 32202P
Weber carburettor set Porsche 356 IDF 44, set for one engine without air filters and manifolds.
Configured for your engine details and to use with original Porsche linkage.
19
09/2016
Porsche-356---912-engineparts-and-machining
Porsche 356 / 912 engineparts and machining > Crankshafts and Rods
Case Gasket Set Porsche 356
Model: 70377P
Case Gasket Set Porsche 356, quality brand, set for one engine
Crankshaft Porsche 356 A / B without counterweights
Model: 03082P
Crankshaft Porsche 356 A/ B without counterweights, new
Bearings 40 - 50 - 50 - 50 mm
Crankshaft Porsche 356 A / B without counterweights, machined
Model: 03083P
Crankshaft Porsche 356 A/ B without counterweights, machined for differend undersizes
Bearings normal: 40 - 50 - 50 - 50 mm, now undersizes!
Please contact us for mor informations!
Crankshaft Porsche 356 C with counterweights
Model: 03080P
Crankshaft Porsche 356 C with counterweights, new
Bearings 40 - 55 - 55 - 50 mm
Crankshaft Porsche 356 C without counterweights
Model: 03081P
Crankshaft Porsche 356 without counterweights, new
Bearings 40 - 55 - 55 - 50 mm
Crankshaft Porsche 356 C without counterweights, machined
Model: 03084P
Crankshaft Porsche 356 C without counterweights, machined for differend undersizes
Bearings normal: 40 - 55 - 55 - 50 mm, now undersizes!
Please contact us for mor informations!
Crankshaft Porsche 356 C/SC with counterweights, machined
Model: 03085P
Crankshaft Porsche 356 C/SC with counterweights, machined for differend undersizes
Bearings normal: 40 - 55 - 55 - 50 mm, now undersizes!
Please contact us for mor informations!
Flywheel Bolt Porsche 356
Model: 23076P
Flywheel Bolt Porsche 356
20
09/2016
Porsche-356---912-engineparts-and-machining
Porsche 356 / 912 engineparts and machining > Crankshafts and Rods
Flywheel Bolt Porsche 356 Reinforged Chromo
Model: 23080P
Flywheel Bolt Porsche 356, reinforged chromo (SCAT)
Gear for Crankshaft Porsche 356
Model: 04812P
Gear for Crankshaft Porsche 356
Mainbearing dowel Porsche 356 case
Model: 05123P
Mainbearing dowel Porsche 356 case, one p/c.
Please inform about lenght!
Oil seal flywheel Porsche 356
Model: 10083P
Oil seal flywheel Porsche 356
Oil seal pully Porsche 356
Model: 10082P
Oil seal pully Porsche 356
Pully Porsche 356
Model: 25040P
Pully Porsche 356 stock size
Rod nuts Porsche 356
Model: 70380P
Rod nuts Porsche 356, set for one engine
Rod rebuild Porsche 356 502 type
Model: 80096P
Rod rebuild Porsche 356 502 type, set
21
09/2016
Porsche-356---912-engineparts-and-machining
Porsche 356 / 912 engineparts and machining > Crankshafts and Rods
Rod rebuild Porsche 356 616 type
Model: 80097P
Rod rebuild Porsche 356 616 type, set
Rods Porsche 356 Carrillo
Model: 07200P
Rods Porsche 356 Carrillo, set for one engine
22
09/2016
Porsche-356---912-engineparts-and-machining
09/2016
Porsche 356 / 912 engineparts and machining > Other Engine Parts
1-2-3 Ignition distributor without vacuum connection for Porsche 356 / 912 - Kopie
Model: 26023P
The 1-2-3 ignition distributor is created in cooperation with VW-professionals, this has resulted in a product that can be used in all Porsche 356 / 912.
Version without vacuum-advance.
Other systems of electronic ignition (Lumenition, Newtronic & Multic etc) require that the original mechanical centrifugal advance system is still fitted, points ?
assisted systems (Boyer ? Bransden etc.) even use the original points operating cam which suffers uneven wear and consequent lumpy running of the engine
because each cylinder has its own inaccurate ignition timing. Furthermore they all require a separate box for the associated electronics.
?123ignition? is different, all is contained in one simple module which just goes in place of the original points box, the points operating cam is removed along with the
advance weights and their bearings which wear, two strong, small magnets slip onto the drive pins which previously held the advance weights, ?123ignition? is then
simply bolted on.
Simple installation without mechanical adaptations.
Smoother engine torque curve.
No maintenance ? ever again!
Variable dwell angle to prevent low speed overheating of ignition coil and make a better spark at all speeds.
Better starting.
Better emissions.
Better fuel consumption.
No burning out of the ignition coil (after stopping the
engine power is cut to the coil after 1 second!).
Built in LED for simple static ignition timing.
Real value for money.
SPECIFICATIONS
direct. : CW (topview)
voltage : 4,0-15,0 Volts
range : 500 - 7000 rpm
temperature : -30 to 85 Celsius
coil : stock or High Energy coil
primary coil NOT below 1,0 ohm
dwell : constant current, fully autom.
time-out : after 1 second current is switched off
spark-bal. : better than 0,5 degr. crankshaft
vacuum : advance starts at 5 inchHg
stops at 10 degr. @ 10 inchHg
gearshift retard > 17 inchHg
max.advance : 45 degr. crankshaft
wiring : red = +6V or +12V, black = '-' coil
Ignition Coil 456 12V
Model: 26106
Ignition coil 456 version 12 Volt, only to use with 123 ignition!
Ignition Coil 456 6V
Model: 26107
Ignition coil 456 version 6 Volt, only to use with 123 ignition!
Ignition Coil Bosch Blue 12V Retro Style Porsche 356 / 912
Model: 26102
Ignition coil Bosch original "blue" version, 12 Volt retro style Porsche 356 / 912
23
Porsche-356---912-engineparts-and-machining
Porsche 356 / 912 engineparts and machining > Other Engine Parts
Ignition Coil Porsche 356 Bosch "Blue" new style
Model: 26104
Ignition coil Porsche 356 Bosch original "blue" version, other colored to match engine finish, 12 Volt, new style
Ignition Distributor Porsche 356 009 Chrome Version
Model: 26013
Tuning Ignition Distributor Porsche 356 009 chrome version
Ignition Distributor Porsche 356 009 Version
Model: 26010
Tuning Ignition Distributor Porsche 356 009 Version
Ignitionwire set silicone blue Porsche 356 912
Model: 26080
Ignitionwire set silicone blue, set for one engine
24
09/2016
Porsche-356---912-engineparts-and-machining
Porsche 356 / 912 engineparts and machining > Oil Cooling and Supplies
Alu HD Oil Cooler Porsche 356
Model: 15043P
Alu HD Oil Cooler Porsche 356
Front oil cooler set Porsche 356 / Porsche 912
Model: 15100
Here we offer different front oil cooler sets with all parts which needed.
Just change the cooler if possible and add the other parts to fit on the engine side.
On the picture you see all the parts which are included.
The correct partnumber will be change from our system with the order!
(Not to use for Porsche 911!)
Gasket set for oil screen Porsche 356
Model: 16116P
Gasket set for oil screen Porsche 356
Machining Engine Cover Porsche 356 for Full Flow
Model: 80387P
Full flow machining Porsche 356 case without parts
Sample picture - we also use gasket-fluid after machining
Mounting for oilcooler universal
Model: 15300
Mounting for oilcooler universal, one p/c.
140x20 / 140x40mm.
Oil Cooler Adapter Porsche 356
Model: 16030P
Oil cooler Adapter Porsche 356 including fittings
Oil Cooler Kit Porsche 356
Model: 15093P
Oil cooler Kit Porsche 356 with two 13 row coolers 210x115mm, including fittings and 10 meter special 150°C hose
Oil filter bracked and hose kit full flow Porsche 356
Model: 80389P
Oil filter bracked and hose kit full flow Porsche 356 with showed parts, including machining case cover, without thermostat
Sample picture - we also use gasket-fluid after machining
25
09/2016
Porsche-356---912-engineparts-and-machining
Porsche 356 / 912 engineparts and machining > Oil Cooling and Supplies
Oil Filter Braked Porsche 356
Model: 16040P
Oil filter braked Porsche 356 including fittings and filter
Oil Filter Full Flow Porsche 356
Model: 16172P
Oil Filter Full Flow Porsche 356
Oil filter hose set Porsche 356 / Porsche 912
Model: 16167P
Oil filter hose set Porsche 356 / Porsche 912
Oil Thermostat Porsche 356
Model: 16050P
In hose oil thermostat Porsche 356
26
09/2016
Porsche-356---912-engineparts-and-machining
Porsche 356 / 912 engineparts and machining > Flywheels and Clutches
Clutch Disc Porsche 356 180mm
Model: 24901P
Clutch Disc Porsche 356 180mm
Clutch Disc Porsche 356 200mm
Model: 24103P
Clutch Disc Porsche 356 200mm
Clutch Disc Porsche 912 M215 200mm
Model: 24105P
Clutch Disc Porsche 912 M215 200mm
Clutch pressure plate Porsche 356 180mm
Model: 24900P
Clutch pressure plate Porsche 356 180mm
Clutch pressure plate Porsche 356 200mm
Model: 24102P
Clutch pressure plate Porsche 356 200mm
Clutch pressure plate Porsche 356 200mm reinforced
Model: 24170P
Clutch pressure plate Porsche 356 200mm reinforced
Clutch pressure plate Porsche 912 M215 200mm
Model: 24104P
Clutch pressure plate Porsche 912 M215 200mm
Flywheel Bolt Porsche 356
Model: 23076P
Flywheel Bolt Porsche 356
27
09/2016
Porsche-356---912-engineparts-and-machining
Porsche 356 / 912 engineparts and machining > Flywheels and Clutches
Flywheel Bolt Porsche 356 Reinforged Chromo
Model: 23080P
Flywheel Bolt Porsche 356, reinforged chromo (SCAT)
Flywheel Porsche 356 and SC 200mm 6V New lightend
Model: 23102P
Flywheel Porsche 356 6V new 200mm.
Lightend, to fit with original Porsche clutch and pressure plate.
Flywheel Porsche 356 and SC 200mm 6V New lightend for VW Clutch
Model: 23103P
Flywheel Porsche 356 6V new 200mm.
Lightend, to fit with VW Beetle clutch and pressure plate.
Flywheel Porsche 912 200mm 130 gears 12 Volt
Model: 23100P
Flywheel Porsche 912 new 200mm 130 gears.
To use with original Porsche 912 clutch and pressure plate (M215).
On a Porsche 356 to fit with VW or Porsche 911 starter, not for original Porsche 356 starter.
(The original Porsche 356 flywheel was only for 6 Volt - 109 gears)
Fylwheel Porsche 356 180mm 6V New
Model: 23101P
Fylwheel Porsche 356 6V new 180mm
Fit with original 180mm clutch and pressure plate.
Modification of 180mm Porsche 356 flywheel for VW clutch
Model: 80114P
Modification Porsche 356 flywheel for VW clutch.
Modification of 180mm flywheel to accept the 200mm VW clutch, including leighten and balance.
To use with our delivered clutch and clutch disk only.
28
09/2016
Porsche-356---912-engineparts-and-machining
Porsche 356 / 912 engineparts and machining > Exhausts
Ahnendorp Exhaust Porsche 356 Full Racer Stainless
Model: 21198P
This is our new steinless racingsystem for Porsche 356.
The header can be fit on each motor dimension.
It is also handmade like our other exhausts, this system includes header boxes replacement tubes (also stainless).
The exhaust tube is made from steel with a special inlay.
Lenght of the exhaust tube round 55cm, so the flow will be perfect.
We recomed to use this system only for race use.
It will fit on all tuned engines perfectly.
To fit the system you must modify the car, delivery like the pictures.
Exhaust Porsche 912 Bursch for US Heater
Model: 21196P
Exhaust Porsche 912 Bursch for US Heater, 38mm diameter, low sound, easy to fit, black high-gloss painted, polished tail pipe.
We could still deliver this system for Porsche 912 with europe heater and for Porsche 356 with europe heater or Porsche 356 with us heater.
Heater Box Replacement Tubes Porsche 356
Model: 21192P
Heater box replacement tubes Porsche 356, to use for our sport exhaust without heating, stainless steel, set for one engine
Sebring Style Race Exhaust Header Porsche 356 without Silencer!
Model: 21197P
Sebring Race exhaust header Porsche 356 without Silencer(!), include heaterbox replacement tubes.
Steel version, no heading, without muffler, most powerfull sound for racing.
Sport Exhaust "Racesport" Porsche 356
Model: 21195P
Sport exhaust "Racesport" Porsche 356, include heaterbox replacement tubes.
Stainlees steel, no heading, with one muffler, free to fit on right or left side.
Tube diameter 42mm.
Sport Exhaust Sebring Style Porsche 356
Model: 21193P
Sport exhaust Sebring style Porsche 356, stainlees steel, to use with early heating or without heating (with our heater box replacement tubes)
Sport Exhaust Two Single Tail Pipe Porsche 356
Model: 21194P
Sport exhaust single tail pipe Porsche 356, stainlees steel, to use with early heating or without heating (with our heaterbox replacement tubes).
Two single tail pipes for fit through the bumper.
29
09/2016
Porsche-356---912-engineparts-and-machining
Porsche 356 / 912 engineparts and machining > Exhausts
Tail Pipes Carrera Style for our Porsche 356 exhaust system
Model: 70545P
Tail Pipes Carrera Style for our Porsche 356 exhaust system.
With those stainlees tailpipes you can easy use the carerra end body.
30
09/2016
Porsche-356---912-engineparts-and-machining
Porsche 356 / 912 engineparts and machining > Machining
356 Lagersattel Änderung für C Hauptlager mit Nutzentrierung
Model: 80156P
356 Lagersattel Änderung für C Hauptlager mit Nutzentrierung.
Ölrücklaufnute an der hinteren Wellendichtung einfräsen, Haltenuten für Lagerschalen und Ölnuten in die Lagersättel
einfräsen, damit die Lager und Kurbelwelle vom SC montiert werden kann.
Align bore main and cam bearings Porsche 356 Are-A, resurfacing case parting surface
Model: 80296P
Align bore main and cam bearings, resurfacing case parting surface Porsche 356 Pre-A.
Machine with resurfacing of oilpump and oil sealing.
Align bore main and cam bearings, resurfacing case parting surface
Model: 80291P
Align bore main and cam bearings, resurfacing case parting surface Porsche 356
Align bore mainbearings to oversize Porsche 356
Model: 80290P
Align bore mainbearings to oversize Porsche 356
Align bore mainbearings to oversize Porsche 356 24 hp / 30 hp
Model: 80298P
Align bore mainbearings to oversize Porsche 356 24 hp / 30 hp
Balance crankshaft, flywheel, clutch plate and pully
Model: 80081P
Balance crankshaft Porsche 356, flywheel, clutch plate and pully seperately and together.
Balance flywheel and clutch plate Porsche 356
Model: 80154P
Balance flywheel and clutch plate Porsche 356
Balance flywheel Porsche 356
Model: 80039P
Balance flywheel Porsche 356
31
09/2016
Porsche-356---912-engineparts-and-machining
Porsche 356 / 912 engineparts and machining > Machining
Bore and hone cylinders Porsche 356 up to 0,5mm
Model: 80072P
Bore and hone cylinders Porsche 356 up to 0,5mm, Biral cylinders only to 83mm
Bore and hone cylinders Porsche 356 up to 1,0mm
Model: 80134P
Bore and hone cylinders Porsche 356 up to 1,0mm
Bore and hone cylinders Porsche 356 up to 86,00mm
Model: 80135P
Bore and hone cylinders Porsche 356 up to 86,00mm, only cast iron cylinders
Check crankshaft for demension, run out and cracks
Model: 80125P
Check crankshaft for demension, run out and cracks
Cleaning of parts in hot tank for 15 minutes
Model: 81010P
Cleaning of parts in hot tank
Crack welding Porsche 356 head
Model: 80128P
Crack welding Porsche 356 head, price for the first crack.
Including machining for long thread if wished.
Crack welding Porsche 356 head
Model: 80136P
Crack welding Porsche 356 head, price for each other crack after the first.
Crankshaft balance Porsche 356
Model: 80038P
Crankshaft balance Porsche 356
32
09/2016
Porsche-356---912-engineparts-and-machining
09/2016
Porsche 356 / 912 engineparts and machining > Machining
Crankshaft with flywheel and clutch plate balance Porsche 356
Model: 80046P
Crankshaft with flywheel and clutch plate balance Porsche 356
Crankshaft with flywheel balance Porsche 356
Model: 80024P
Crankshaft with flywheel balance Porsche 356
Cut 4 valve seats Super Finish Porsche 356 / 912
Model: 80007P
Cut 4 valve seats with radius Porsche 356 / 912, Super Finish
Cylinderhead rebuild Porsche 356 and Tuning I, set
Model: 80256P
Cylinderhead rebuild Porsche 356 Tuning I
Including new guides, milling seats, grinding valves, resurfacing, porting and matching of your manifolds by hand milling, for both heads / one engine
Cylinderhead rebuild Porsche 356 Tuning II 41/35, set
Model: 80301P
Cylinderhead rebuild Porsche 356 Tuning II 41/35mm valves
Including larger and lightend 8mm valves intake 41mm and exhaust 35mm.
Porting and matching of your maifolds by "hand milling".
With new guides and resurfacing.
Price for one set = 2 cylinderheads
Cylinderhead rebuild Porsche 356 Tuning II 41/35, set
Model: 80286P
Cylinderhead rebuild Porsche 356 Tuning II 41/35mm valves incl. porting of your manifolds by grinding.
Including larger and lightend 8mm valves intake 41mm and exhaust 35mm.
With new guides and resurfacing.
Price for one set = 2 cylinder heads
Cylinderhead std. rebuild Porsche 356, set
Model: 80206P
Cylinderhead std. rebuild Porsche 356, including new guides, milling seats, grinding valves and resurfacing, for both heads.
Attention:
All parts must deliver disassembled and cleaned.
Otherwise we can not machine your parts or only for additional cost.
Flywheel grinding Porsche 356
Model: 80094P
Flywheel grinding Porsche 356
33
Porsche-356---912-engineparts-and-machining
Porsche 356 / 912 engineparts and machining > Machining
Grinding of friction surface Porsche 356
Model: 80082P
Grinding of friction and pressure plate fitting surface
Hone clinders Porsche 356
Model: 80030P
Hone clinders (fresh up) Porsche 356, set
Install shuffle bushing on center bearing saddle Porsche 356
Model: 80025P
Install shuffle bushing on center bearing saddle Porsche 356
Lighten Porsche 356 flywheel
Model: 80115P
Lighten Porsche 356 flywheel and balance
Lighten, weight correction and shotblasting of Porsche 356 rods, set for one engine
Model: 80033P
Lighten, weight correction and shotblasting of rods, set for one engine.
Machining of your rods!
Lighten round 70 gramms for each!
Machining Engine Cover Porsche 356 for Full Flow
Model: 80387P
Full flow machining Porsche 356 case without parts
Sample picture - we also use gasket-fluid after machining
Milling exhaust flanges Porsche 356
Model: 80210P
Milling exhaust flanges Porsche 356, for both heads
Modification Porsche 356 flywheel for VW clutch
Model: 80114P
Modification Porsche 356 flywheel for VW clutch.
Modification of 180mm flywheel to accept the 200mm VW clutch, including leighten and balance.
To use with from us delivered VW type 1 clutch and clutch disk.
34
09/2016
Porsche-356---912-engineparts-and-machining
Porsche 356 / 912 engineparts and machining > Machining
New valve seats Porsche 356 / 912 heads
Model: 80058PO
New valve seats Porsche 356 heads, price for 4 of the same size, price without standard head rebuild!
New valve seats Porsche 356 heads
Model: 80058P
New valve seats Porsche 356 heads, price for 4 of the same size, price only in combination with standard head rebuild!
Oil filter bracket and hose kit full flow Porsche 356
Model: 80389P
Oil filter bracket and hose kit full flow Porsche 356 with showed parts, including machining case cover, without thermostat
Sample picture - we also use gasket-fluid after machining
Oversize valve seat Porsche 356 head one p/c - add. cost
Model: 80089P
Oversize valve seat Porsche 356 head for one p/c - add. cost, price only in combination with standard head rebuild!
Polish flywheel or pully seal surface
Model: 80164P
Polish flywheel or pully seal surface
Polishing of used crank journals Porsche 356
Model: 80162P
Polishing of used crank journals Porsche 356
Porsche 356 engine housing machine with shuffle bolts
Model: 80295P
Porsche 356 engine housing machine with shuffle bolts (in addition to Align bore main and cam bearings, resurfacing case parting surface).
Sometimes the cases are so warped that either the crankshaft or the camshaft bearing have stages.
We have the following solution:
Remove the original alignment pins.
The housing halves are aligned as closely as possible with dial gauge.
2 holes of the original mounting screws are aligned on the cutter, drilled, rubbed and honed to final size.
Then bolts are manufactured and ground to final dimensions.
After assembly, the housing may be align bore the bearings.
35
09/2016
Porsche-356---912-engineparts-and-machining
Porsche 356 / 912 engineparts and machining > Machining
Porsche 356 Gehäuse Ölnuten einfräsen
Model: 80155P
Porsche 356 Gehäuse Ölnuten im Bereich der Hauptlagergasse einfräsen
Porsche 356 Main Bearing No. 4 Repair
Model: 80388P
Porsche 356 main bearing no. 4 repair, bore cover to oversize, fitting of bushing and bore to exact size.
Pull off cam gear Porsche 356
Model: 80060P
Pull off cam gear Porsche 356
Regrind crankshaft Porsche 356
Model: 80021P
Regrind crankshaft Porsche 356 all journals
Regrinding rockers Porsche 356
Model: 80131P
Regrinding rockers Porsche 356, set for one engine
Repair of oil pump Porsche 356 912 oversize gears
Model: 80157P
Repair of oil pump Porsche 356 with oversize gears, oversize shaft might be needed
Repair of oil pump shafts Porsche 356 912 oversize shafts
Model: 80158P
Repair of oil pump shafts Porsche 356 additional to repair 80157P.
Fitting oversize shafts and bushings.
Repair of worn lifter bores Porsche 356
Model: 80500P
Repair of worn lifter bores Porsche 356 case with bushings, price for one engine
36
09/2016
Porsche-356---912-engineparts-and-machining
Porsche 356 / 912 engineparts and machining > Machining
Replace 4 valve guides inlet or exhaust Porsche 356 / 912
Model: 80008P
Replace 4 valve guides inlet or exhaust Porsche 356 / 912 (2 cylinder heads).
Oversize for additional costs.
Replace and produce 1 valve guide inlet or exhaust
Model: 80088
Replace and produce 1 valve guide if needed, inlet or exhaust.
Price for one piece!
Resurfacing cylinder heads Porsche 356
Model: 80001P
Resurfacing cylinder heads Porsche 356, price for a set
Resurfacing cylinderheads Porsche 356 valve cover side
Model: 80002P
Resurfacing cylinderheads Porsche 356 on valve cover side, needed before resurfacing heads if they are bend
Resurfacing of cylinder spigot Porsche 356
Model: 80040P
Resurfacing of cylinder spigot Porsche 356
Rod machining Porsche 356 502 type for SC bearings
Model: 80166P
Rod machining Porsche 356 502 type for new bearings
Rod rebuild Porsche 356 502 type
Model: 80096P
Rod rebuild Porsche 356 502 type, set
Rod rebuild Porsche 356 616 type
Model: 80097P
Rod rebuild Porsche 356 616 type, set
37
09/2016
Porsche-356---912-engineparts-and-machining
Porsche 356 / 912 engineparts and machining > Machining
Sand blasting of parts for 15 minutes
Model: 81011P
Sand blasting of parts
38
09/2016
Porsche-356---912-engineparts-and-machining
Porsche 356 / 912 engineparts and machining > Other Parts
Engine Bracket
Model: 40527
Engine Bracket, to fit on workbench
High Temperature Aerosol Exhaust Paint Spray Black
Model: 20110
High Temperature Aerosol Exhaust Paint Spray Black
T-Shirt Ahnendorp
Model: 90011
T-Shirt Ahnendorp
Please select size
T-Shirt Ahnendorp Woman
Model: 90010
T-Shirt Ahnendorp Woman
Please select size
09/2016