Porsche-911-engine-parts-and-machining-incl--sub

06/2016
Porsche-911-engine-parts-and-machining-incl--sub-categorys
Ahnendorp B.A.S.
Motorteile &-bearbeitung Porsche und VW
Industriestrasse 2
46419 Isselburg
Germany
Fon: +49 2874 4047
Fax: +49 2874 1816
eMail: info(at)ahnendorp.com
Internet www.ahnendorp.com
Table of content
Porsche 911 engine parts and machining incl. sub-categorys........................................................................................................... 3
Piston and Cylinder Sets........................................................................................................................................................... 3 - 6
Tuning & Big Bore Piston and Cylinder Sets .......................................................................................................................... 7 - 9
Piston ring sets............................................................................................................................................................................. 10
Camshafts and Supplies........................................................................................................................................................ 11 - 12
Gasket Sets ........................................................................................................................................................................... 13 - 16
Bearing Sets.......................................................................................................................................................................... 17 - 18
Valves (p/c) .......................................................................................................................................................................... 19 - 20
Other Engine Parts................................................................................................................................................................ 21 - 24
Machining............................................................................................................................................................................. 25 - 32
Other Parts ................................................................................................................................................................................... 33
Porsche 911 Exhaust (see PDF also!).......................................................................................................................................... 34
06/2016
Porsche-911-engine-parts-and-machining-incl--sub-categorys
Porsche 911 engine parts and machining incl. sub-categorys > Piston and Cylinder Sets
Piston / Cylinder Porsche 911 2,0 110PS, 914/6 Mahle
Model: 01147P
Mahle piston and cylinder set Porsche 911.
For 2,0 liter engine, 110PS, also to use for Porsche 914/6.
Set for one engine.
Piston / Cylinder Porsche 911 2,0 130PS Mahle
Model: 01138P
Mahle piston and cylinder set Porsche 911.
For 2,0 liter engine, 130PS, build year 1965-1968.
Set for one engine.
Piston / Cylinder Porsche 911 2,0 S 160PS Mahle
Model: 01139P
Mahle piston and cylinder set Porsche 911.
For 2,0 liter S engine, 160PS, build year 1967-1968.
Set for one engine.
Piston / Cylinder Porsche 911 2,2 S 180PS Mahle
Model: 01149P
Mahle piston and cylinder set Porsche 911.
For 2,2 liter S engine, 180PS.
Set for one engine.
Piston / Cylinder Porsche 911 2,4 E Mahle
Model: 01140P
Mahle piston and cylinder set Porsche 911.
For 2,4 liter E engine, build year 1972-1973.
Set for one engine.
Piston / Cylinder Porsche 911 2,4 L 130PS / 911 2,4 T-E Mahle
Model: 01153P
Mahle piston and cylinder set Porsche 911.
For 9112,4 L and 911 2,4 T-E 130PS engines, build year 1972-1973.
Set for one engine.
Piston / Cylinder Porsche 911 2,4 S Mahle
Model: 01145P
Mahle piston and cylinder set Porsche 911.
For 2,4 liter S engine, build year 1972-1973.
Set for one engine.
Piston / Cylinder Porsche 911 2,4 TK USA 140PS Mahle
Model: 01154P
Mahle piston and cylinder set Porsche 911 TK USA.
For 2,4 liter engine, 140PS, build year 1973.
Set for one engine.
3
06/2016
Porsche-911-engine-parts-and-machining-incl--sub-categorys
Porsche 911 engine parts and machining incl. sub-categorys > Piston and Cylinder Sets
Piston / Cylinder Porsche 911 2,7 150PS Mahle
Model: 01141P
Mahle piston and cylinder set Porsche 911.
For 2,4 liter engine, 150PS.
Set for one engine.
Piston / Cylinder Porsche 911 2,7 Carrera 210PS Mahle
Model: 01142P
Mahle piston and cylinder set Porsche 911.
For 2,7 liter Carrera engine, 210PS.
Set for one engine.
Piston / Cylinder Porsche 911 3,0 204PS Mahle
Model: 01143P
Mahle piston and cylinder set Porsche 911.
For 3,0 liter engine, 204PS.
Set for one engine.
Piston / Cylinder Porsche 911 3,0 Turbo Mahle
Model: 01144P
Mahle piston and cylinder set Porsche 911.
For 3,0 liter turbo engine.
Set for one engine.
Piston / Cylinder Porsche 911 3,2 218PS Mahle
Model: 01146P
Mahle piston and cylinder set Porsche 911.
For 3,2 liter engine, 218PS.
Set for one engine.
Piston / Cylinder Porsche 911 3,2 Carrera Mahle
Model: 01158P
Mahle piston and cylinder set Porsche 911Carrera.
For 3,2 liter Carrera engine, buold year 1984-1989 (10,3:1).
Set for one engine.
Piston / Cylinder Porsche 911 Carrera 3,0 / 911 SC 180PS Mahle
Model: 01156P
Mahle piston and cylinder set Porsche 911Carrera and SC.
For 911 Carrera 3,0 and 911 SC 180PS engines, build year 1977-1980.
Set for one engine.
Piston / Cylinder Porsche 911 E 2,2 155PS Mahle
Model: 01152P
Mahle piston and cylinder set Porsche 911 E.
For 2,2 liter engine, 155PS, build year 1970-1971.
Set for one engine.
4
06/2016
Porsche-911-engine-parts-and-machining-incl--sub-categorys
Porsche 911 engine parts and machining incl. sub-categorys > Piston and Cylinder Sets
Piston / Cylinder Porsche 911 L 130PS / 911 E 140PS Mahle
Model: 01150P
Mahle piston and cylinder set Porsche 911.
For 911 L 130PS and 911 E 140PS engines, build year 1969.
Set for one engine.
Piston / Cylinder Porsche 911 S 175PS / 911 165PS Mahle
Model: 01155P
Mahle piston and cylinder set Porsche 911S.
For 911 S 175PS and 911 165PS engines, build year 1974-1977.
Set for one engine.
Piston / Cylinder Porsche 911 SC USA 172PS Mahle
Model: 01157P
Mahle piston and cylinder set Porsche 911 SC USA.
For 172PS engine, build year 1979-1983.
Set for one engine.
Piston / Cylinder Porsche 911 T 2,2 125PS Mahle
Model: 01151P
Mahle piston and cylinder set Porsche 911 T.
For 2,2 liter engine, 125PS, build year 1970-1971.
Set for one engine.
Piston / Cylinder Porsche 930 3,3 Turbo Mahle
Model: 01148P
Mahle piston and cylinder set Porsche 911.
For 3,3 liter Turbo engine, engine type 930.66 with k-jetronic.
Set for one engine.
Piston / Cylinder Porsche 964 Turbo 2 - 3,3 Mahle
Model: 01160P
Mahle piston and cylinder set Porsche 964 Turbo 2.
For 3,3 liter Turbo engine, 320PS, build year 1991-1992.
Set for one engine.
Piston / Cylinder Porsche 964 Turbo 3 - 3,6 Mahle
Model: 01161P
Mahle piston and cylinder set Porsche 964 Turbo 3.
For 3,6 liter Turbo engine, 360PS, build year 1993-1994.
Set for one engine.
Piston / Cylinder Porsche 993 272PS 285PS Mahle
Model: 01162P
Mahle piston and cylinder set Porsche 993.
For 272PS and 285PS, build year 1994-1998.
Set for one engine.
5
06/2016
Porsche-911-engine-parts-and-machining-incl--sub-categorys
Porsche 911 engine parts and machining incl. sub-categorys > Piston and Cylinder Sets
Piston / Cylinder Porsche 993 Biturbo 408PS Mahle
Model: 01163P
Mahle piston and cylinder set Porsche 993 Biturbo.
For 408PS, build year 1995-1998.
Set for one engine.
Piston / Cylinder Porsche C2 / C4 Mahle
Model: 01159P
Mahle piston and cylinder set Porsche C2 / C4.
Build year 1991-1993.
Set for one engine.
Piston Porsche 911 2,0 and 2.0 L 130HP Germany Forged 9:1
Model: 01138PA
We made german forged pistons for the Porsche 911 with 2000ccm engine (130 hp).
They are oversize 80,50 mm, so your own cylinders can be machined.
Also for the 2,0 L engine type!
Set for one engine.
Exclusive German Ahnendorp B.A.S. product!
Piston Porsche 911 2,0 and 2.0 L 130HP Germany Forged 9:1 including cylinder
Model: 01138PA+BEA
We made german forged pistons for the Porsche 911 with 2000ccm engine (130 hp).
Including machining your cylinders to 80,50mm.
They are oversize 80,50 mm, so your own cylinders can be machined.
Also for the 2,0 L engine type!
Set for one engine.
Exclusive German Ahnendorp B.A.S. product!
6
06/2016
Porsche-911-engine-parts-and-machining-incl--sub-categorys
Porsche 911 engine parts and machining incl. sub-categorys > Tuning & Big Bore Piston and
Cylinder Sets
3.2 Carrera Upgrade Kit to 3,4 incl. Cams and valves
Model: 01113PN
This is one of the most sold sets to upgrade your 3.2 Carrera engine up to 3.4.
Much more torque, more RPM and top speed.
Including Schrick cams 288/280 degrees and bigger valves 52mm/44mm.
Nice idle, daily driver concept.
Piston / Cylinder Porsche 911 2,2 to 2,5 Mahle
Model: 01300P
Mahle piston and cylinder set Porsche 911.
Upgrade for 2,2 liter engine to 2,5 liter.
Diameter 89mm.
Set for one engine.
Piston / Cylinder Porsche 911 2,4 to 2,5 Mahle
Model: 01301P
Mahle piston and cylinder set Porsche 911.
Upgrade for 2,4 liter engine to 2,5 liter.
Diameter 86,7mm.
Set for one engine.
Piston / Cylinder Porsche 911 2,7 Carrera Mahle
Model: 01302P
Mahle piston and cylinder set Porsche 911 Carrera.
For 2,7 liter engine.
Diameter 90mm (10,3:1).
Set for one engine.
Piston / Cylinder Porsche 911 2,7 Carrera to 2,8 Mahle
Model: 01303P
Mahle piston and cylinder set Porsche 911 Carrera.
Upgrade for 2,7 liter engine to 2,8 liter.
Diameter 92mm.
Set for one engine.
Piston / Cylinder Porsche 911 2,7 Carrera to 2,9 Mahle
Model: 01304P
Mahle piston and cylinder set Porsche 911 Carrera.
Upgrade for 2,7 liter engine to 2,9 liter.
Diameter 93mm.
Set for one engine.
Piston / Cylinder Porsche 911 2,7 Carrera to 3,0 (RSR) Mahle
Model: 01305P
Mahle piston and cylinder set Porsche 911 Carrera.
Upgrade for 2,7 liter engine to 3,0 liter RSR.
Diameter 95mm (10,3:1).
Set for one engine.
Piston / Cylinder Porsche 911 3,0 SC Mahle
Model: 01307P
Mahle piston and cylinder set Porsche 911.
For 3,0 liter SC engine
Diameter 95mm (10,5:1).
Set for one engine.
7
06/2016
Porsche-911-engine-parts-and-machining-incl--sub-categorys
Porsche 911 engine parts and machining incl. sub-categorys > Tuning & Big Bore Piston and
Cylinder Sets
Piston / Cylinder Porsche 911 3,0 SC to 3,2 Mahle
Model: 01310P
Mahle piston and cylinder set Porsche 911.
Upgrade for 3,0 liter SC engine to 3,2 liter.
Diameter 98mm.
Set for one engine.
Piston / Cylinder Porsche 911 3,0 SC to 3,3 Mahle
Model: 01313P
Mahle piston and cylinder set Porsche 911.
Upgrade for 3,0 liter SC engine to 3,3 liter.
Diameter 98mm (10,5:1).
Set for one engine.
Piston / Cylinder Porsche 911 3,0 SC to 3,5 Mahle
Model: 01314P
Mahle piston and cylinder set Porsche 911.
Upgrade for 3,0 liter SC engine to 3,5 liter.
Diameter 100mm.
Set for one engine.
Piston / Cylinder Porsche 911 3,2 Carrera to 3,4 Mahle
Model: 01311P
Mahle piston and cylinder set Porsche 911.
Upgrade for 3,2 liter Carrera engine to 3,4 liter.
Diameter 98mm.
Set for one engine.
Piston / Cylinder Porsche 911 3,2 Carrera to 3,5 Mahle
Model: 01315P
Mahle piston and cylinder set Porsche 911.
Upgrade for 3,2 liter Carrera engine to 3,5 liter.
Diameter 100mm.
Set for one engine.
Piston / Cylinder Porsche 911 3,6 to 3,8 Mahle
Model: 01317P
Mahle piston and cylinder set Porsche 911.
Upgrade for 3,6 liter engine to 3,8 liter.
Diameter 102mm.
Set for one engine.
Piston / Cylinder Porsche 911 RSR Mahle
Model: 01306P
Mahle piston and cylinder set Porsche 911 RSR.
Diameter 95mm (10,3:1).
Set for one engine.
Piston / Cylinder Porsche 930 Turbo 3,0 to 3,3 Mahle
Model: 01312P
Mahle piston and cylinder set Porsche 930 Turbo.
Upgrade for 3,0 liter engine to 3,3 liter.
Diameter 98mm (7,5:1).
Set for one engine.
8
06/2016
Porsche-911-engine-parts-and-machining-incl--sub-categorys
Porsche 911 engine parts and machining incl. sub-categorys > Tuning & Big Bore Piston and
Cylinder Sets
Piston / Cylinder Porsche 930 Turbo 3,3 to 3,5 Mahle
Model: 01316P
Mahle piston and cylinder set Porsche 930 Turbo.
Upgrade for 3,3 liter engine to 3,5 liter.
Diameter 100mm.
Set for one engine.
Piston / Cylinder Porsche 930 Turbo Mahle
Model: 01309P
Mahle piston and cylinder set Porsche 930 Turbo.
Diameter 97mm (8,0:1).
Set for one engine.
Piston / Cylinder Porsche 935 Turbo Mahle
Model: 01308P
Mahle piston and cylinder set Porsche 935 Turbo.
Diameter 95mm (7,0:1).
Set for one engine.
9
06/2016
Porsche-911-engine-parts-and-machining-incl--sub-categorys
Porsche 911 engine parts and machining incl. sub-categorys > Piston ring sets
Piston ring sets for Porsche 911
Model: 51111P-A
We could deliver all piston ring sets for porsche 911 pistons.
Please contact us that we can offer them.
The dimensons and hight of the rings are needed!
10
06/2016
Porsche-911-engine-parts-and-machining-incl--sub-categorys
Porsche 911 engine parts and machining incl. sub-categorys > Camshafts and Supplies
Camshafts Porsche 911 E
Model: 04411P
Camshafts Porsche 911 E
Camshafts Porsche 911 RSR Set
Model: 04405P
To fit early engines with 47 mm bearings.
Grind like RSR usuable for camhousings with 3 or 4 bearings.
Exhaust valve lift 11,7 mm duration 328°.
Intake value lift 12,2 mm duration 336 °.
Valve lift at TDC
Inlet: 5,95 mm
Exhaust 4,85 mm
Lobecenter 100 °
With inside oil feed.
Camshafts Porsche 911 S
Model: 04410P
Camshafts Porsche 911 S
Camshafts Porsche 911 SC
Model: 04413P
Camshafts Porsche 911 SC
Camshafts Porsche 911 T
Model: 04412P
Camshafts Porsche 911 T
11
06/2016
Porsche-911-engine-parts-and-machining-incl--sub-categorys
Porsche 911 engine parts and machining incl. sub-categorys > Camshafts and Supplies
Schrick Special Camshafts Porsche 911 catalogue
Model: Schrick
We also offer Schrick Porsche 911 camshafts.
For more details please see the catalogue.
The listed prices at the catalogue are without vat, please ask us about your price.
Printed catalogue for free with your order!
Schrick catalogue:www.avl-schrick.com/dat/MK/Schrick%202009%20D.pdf
List of some Schrick Porsche 911 camshafts, for more the details press link.
Porsche 911 6 Zyl. 2 Vent.
0005 L1 880-02 - 288/280/114, Lager Ø 49mm
0005 R1 880-02 - 288/280/114, Lager Ø 49mm
0005 L1 921-01 - 292/284/114, Lager Ø 49mm
0005 R1 921-01 - 292/284/114, Lager Ø 49mm
0005 L1 040-00 - 304/296/112, Lager Ø 49mm
0005 R1 040-00 - 304/296/112, Lager Ø 49mm
0005 L1 200-01 - 320/308/108, Lager Ø 49mm
0005 R1 200-01 - 320/308/108, Lager Ø 49mm
0452 E1 641-00 - 264/127
0452 A1 601-00 - 260/108
0452 E1 681-00 - 268/127
0452 A1 641-00 - 264/108
Porsche 996 6 Zyl. 4 Vent. Wasserkühlung (Boxster, 911 Carrera 1998 - 3,4L )
0319 E1 641-R0 - 264/120 - 2,5L Motor (Boxster) mit verstellbarem Kettenrad
0319 A1 641-R0 - 264/108 - 2,5L Motor (Boxster)
0319 E1 641-L0 - 264/120 - 2,5L Motor (Boxster) mit verstellbarem Kettenrad
0319 A1 641-L0 - 264/108 - 2,5L Motor (Boxster)
0319 E1 801-R0 - 280/127 - 3,4L Motor (911) mit verstellbarem Kettenrad
0319 A1 721-R0 - 272/113 - 3,4L Motor (911)
0319 E1 801-L0 - 280/127 - 3,4L Motor (911) mit verstellbarem Kettenrad
0319 A1 721-L0 - 272/113 - 3,4L Motor (911)
0319 E1 800-R0 - 280/127 - 3,4L Motor (911) mit verstellbarem Kettenrad
0319 A1 720-R0 - 272/113 - 3,4L Motor (911)
0319 E1 800-L0 - 280/127 - 3,4L Motor (911) mit verstellbarem Kettenrad
0319 A1 720-L0 - 272/113 - 3,4L motor (911)
Porsche 996 GT3 CUP 6 Zyl. 4 Vent. 0450 E1 001-L0 - 300/108
0450 E1 001-R0 - 300/108
0450 A1 921-L0 - 292/110
0450 A1 921-R0 - 292/110
Porsche 996/997 3,6L 6Zyl. 4Vent.
0454 E1 841-R0 - 284/125
0454 E1 841-L0 - 284/125
0454 A1 921-R0 - 292/117
0454 A1 921-L0 - 292/117
12
06/2016
Porsche-911-engine-parts-and-machining-incl--sub-categorys
Porsche 911 engine parts and machining incl. sub-categorys > Gasket Sets
Assembly paste for bearings, crank and cam
Model: 08095
Assembly paste for bearings, crank and cam
Case Gasket Set Porsche all 911, 1965-1977
Model: 10081P
Case gasket set Porsche all 911, 1965-1977, for complete case
Case Gasket Set Porsche all 911, 1978-1998
Model: 10092P
Case gasket set Porsche all 911, 1978-1998 for complete case
(3,0 / 3,2 / 3,3 / 3,6 / 3,8)
Complete Gasket Set Porsche 911 2,0 S.TU, 1966-1969
Model: 10085P
Complete gasket set Porsche 911 2,0 S.TU, 1966-1969, for one engine
Complete Gasket Set Porsche 911 2,0 T,E,S, Mod. 1969
Model: 10086P
Complete gasket set Porsche 911 2,0 T,E,S, Mod. 1969 with Weber carburettors or mechanical injection , for one engine
Complete Gasket Set Porsche 911 2,2 T, 1970-1971
Model: 10100P
Complete gasket set Porsche 911 2,2 T, 1970-1971, for one engine
Complete Gasket Set Porsche 911, 2,0-2,4, T,E,S 1972-1973
Model: 10101P
Complete gasket set Porsche 911 2,0-2,4, T,E,S 1972-1973, for one engine
Head Gasket Set Porsche 911 2,0 165 PS 1974-1977
Model: 10093P
Head gasket set Porsche 911 2,0 165 PS, K-jetronic, 1974-1977, for all heads
13
06/2016
Porsche-911-engine-parts-and-machining-incl--sub-categorys
Porsche 911 engine parts and machining incl. sub-categorys > Gasket Sets
Head Gasket Set Porsche 911 2,0 S.TU, 1966-1969
Model: 10109P
Head gasket set Porsche 911 2,0 S.TU, 1966-1969, for all heads
Head Gasket Set Porsche 911 2,0 T,E,S, Mod. 1969
Model: 10110P
Head gasket set Porsche 911 2,0 T,E,S, Mod. 1969 with Weber carburettors or mechanical injection , for all heads
Head Gasket Set Porsche 911 2,2 T, 1970-1971
Model: 10111P
Head gasket set Porsche 911 2,2 T, 1970-1971, for all heads
Head Gasket Set Porsche 911 2,7 150/175 PS 1974-1977
Model: 10089P
Head gasket set Porsche 911 2,7 150/175 PS, K-Jetronic, 1974-1977, for all heads
Head Gasket Set Porsche 911 2,7 1973-1976
Model: 10088P
Head gasket set Porsche 911 2,7 1973-1976, for all heads
Head Gasket Set Porsche 911 3,0 / SC Carrera 1976-1983
Model: 10090P
Head gasket set Porsche 911 3,0 / SC Carrera 1976-1983, for all heads
Head Gasket Set Porsche 911 3,2 Carrera 1984-1989
Model: 10077P
Head gasket set Porsche 911 3,2 Carrera 1984-1989, for all heads
Head Gasket Set Porsche 911, 2,0-2,4, T,E,S 1972-1973
Model: 10112P
Head gasket set Porsche 911 2,0-2,4, T,E,S 1972-1973, for all heads
14
06/2016
Porsche-911-engine-parts-and-machining-incl--sub-categorys
Porsche 911 engine parts and machining incl. sub-categorys > Gasket Sets
Head Gasket Set Porsche 930 3,0 / Turbo 1975-1977
Model: 10094P
Head gasket set Porsche 930 3,0 / Turbo 1975-1977, for all heads
Head Gasket Set Porsche 930 3,0 / Turbo 1978-1989
Model: 10095P
Head gasket set Porsche 930 3,0 / Turbo 1978-1989, for all heads
Head Gasket Set Porsche 964 3,6 / C2/4 1989-1994
Model: 10096P
Head gasket set Porsche 964 3,6 / C2/4 1989-1994, for all heads
Head Gasket Set Porsche 965 3,3 / Turbo 1991-1992
Model: 10097P
Head gasket set Porsche 965 3,3 / Turbo 1991-1992, for all heads
Head Gasket Set Porsche 965 3,6 / Turbo 1992-1994
Model: 10098P
Head gasket set Porsche 965 3,6 / Turbo 1992-1994, for all heads
Head Gasket Set Porsche 993 1994-1998
Model: 10099P
Head gasket set Porsche 993 1994-1998, for all heads
Head Gasket Set Porsche 996 up to 1998
Model: 10113P
Head gasket set Porsche 996 up to 1998, for both heads
Valve Cover Gasket Set Porsche all 911, 2,0-3,3
Model: 10014P
Valve cover gasket set Porsche all 911, 2,0-3,3, for all heads
15
06/2016
Porsche-911-engine-parts-and-machining-incl--sub-categorys
Porsche 911 engine parts and machining incl. sub-categorys > Gasket Sets
Valve Cover Gasket Set Porsche all 911, 3,6
Model: 10015P
Valve cover gasket set Porsche all 911 3,6 for all heads
16
06/2016
Porsche-911-engine-parts-and-machining-incl--sub-categorys
Porsche 911 engine parts and machining incl. sub-categorys > Bearing Sets
HD - Race Rod Bearing Set Porsche 911 2,0-2,2 -0,25mm
Model: 06201P
HD - Race Rod bearing set for Porsche 911 2,0-2,2 -0,25mm, 57mm rod diameter.
HD - Race Rod Bearing Set Porsche 911 2,0-2,2 Standard
Model: 06200P
HD - Race Rod bearing set for Porsche 911 2,0-2,2 Standard, 57mm.
Mainbearing No. 8 Porsche 911 Standard
Model: 05330P
Mainbearing No. 8 Porsche 911 Standard
Mainbearing No. 8 Porsche 911 Standard / -0,25
Model: 05331P
Mainbearing No. 8 Porsche 911 Standard / -0,25
Mainbearing Porsche 911 2,0-2,7 to 1974 -0,25
Model: 05226P
Mainbearing Porsche 911 2,0-2,7 to 1974 -0,25, for one engine
Mainbearing Porsche 911 2,0-2,7 to 1974 Standard
Model: 05224P
Mainbearing Porsche 911 2,0-2,7 to 1974 standard, for one engine
Mainbearing Porsche 911 2,7-3,0 up to 1974 Standard
Model: 05223P
Mainbearing Porsche 911 2,7-3,0 standard, for one engine
Mainbearing Porsche 911 3,0-3,6 1978-1989 Standard
Model: 05225P
Mainbearing Porsche 911 3,0-3,6 1978-1989 Standard, for one engine
17
06/2016
Porsche-911-engine-parts-and-machining-incl--sub-categorys
Porsche 911 engine parts and machining incl. sub-categorys > Bearing Sets
Oversize mainbearing Porsche 911 2,0-2,7 to 1974 by Ahnendorp +0,50 -0,25
Model: 05300P
Oversize mainbearing Porsche 911 2,0-2,7 to 1974, new produced as Ahnendorp part.
So many old cases could be use again.
Oversize for the case / mainbearing: +0,50mm
Undersize for the crankshaft: -0,25mm.
Delivery: Bearings 1-7.
Rod Bearing Porsche 911 2,0-2,2 -0,25
Model: 06066P
Rod bearing set Porsche 911 2,0-2,2 -0,25, for one engine
Rod Bearing Porsche 911 2,0-2,2 Standard
Model: 06063P
Rod bearing set Porsche 911 2,0-2,2 standard, for one engine
Rod Bearing Porsche 911 2,4-3,0 until 1977 -0,25
Model: 06067P
Rod bearing Porsche 911 2,4-3,0 until 1977 -0,25, for one engine
Rod Bearing Porsche 911 2,4-3,0 until 1977 Standard
Model: 06062P
Rod bearing Porsche 911 2,4-3,0 until 1977 standard, for one engine
Rod Bearing Porsche 911 3,0 upper 1977 Standard
Model: 06064P
Rod bearing Porsche 911 3,0 upper 1977 standard, for one engine
Rod Bearing Porsche 911 3,2-3,6 1984-1993 Standard
Model: 06065P
Rod bearing Porsche 911 3,2-3,6 1984-1993 standard, for one engine
18
06/2016
Porsche-911-engine-parts-and-machining-incl--sub-categorys
Porsche 911 engine parts and machining incl. sub-categorys > Valves (p/c)
Exhaust Valve Porsche 911 2,0 35mm 1966-1968
Model: 09412P
Exhaust valve Porsche 911 2,0 35mm 1966-1968, one piece
Exhaust Valve Porsche 911 2,0 S 39mm 1969
Model: 09413P
Exhaust valve Porsche 911 2,0 S 39mm 1969, one piece.
Only as OE valve!
Exhaust Valve Porsche 911 2,2-2,7 40mm 1970-1972
Model: 09404P
Exhaust valve Porsche 911 2,2-2,7 40mm 1970-1972, one piece (not for Carrera 3,0)
Soda filled
Exhaust Valve Porsche 911 3,0-3,2 41,5mm 1978-1989
Model: 09414P
Exhaust valve Porsche 911 3,0-3,2 41,5mm 1978-1989, one piece
Exhaust Valve Porsche 911 S/TU 38mm 1967-1968
Model: 09421P
Exhaust valve Porsche 911 S/TU 38mm 1967-1968, one piece
Exhaust Valve Porsche 911 Turbo 41,5mm Natrium gefüllt
Model: 09422P
Exhaust Valve Porsche 911 Turbo 41,5mm Natrium gefüllt
Exhaust Valve Porsche 964 3,6 42,5mm 1989-1994
Model: 09415P
Exhaust valve Porsche 964 3,6 42,5mm 1989-1994, one piece
Intake Valve Porsche 911 2,0 39mm 1966-1968
Model: 09416P
Intake valve Porsche 911 2,0 39mm 1966-1968, one piece
19
06/2016
Porsche-911-engine-parts-and-machining-incl--sub-categorys
Porsche 911 engine parts and machining incl. sub-categorys > Valves (p/c)
Intake Valve Porsche 911 2,0 45mm 1969
Model: 09417P
Intake valve Porsche 911 2,0 45mm 1969, one piece.
Only as OE valve.
Intake Valve Porsche 911 2,0-2,7 46mm 1970-1977
Model: 09410P
Intake valve Porsche 911 2,0-2,7 46mm 1970-1977, one piece (not for carrera 3,0)
Intake Valve Porsche 911 3,0-3,2 49mm 1978-1989
Model: 09418P
Intake valve Porsche 911 3,0-3,2 49mm 1978-1989, one piece
Intake Valve Porsche 911 S/TU 42mm 1967-1968
Model: 09420P
Intake valve Porsche 911 S/TU 42mm 1967-1968, one piece
Intake Valve Porsche 964 3,6 50mm 1989-1994
Model: 09419P
Intake valve Porsche 964 3,6 50mm 1989-1994, one piece
20
06/2016
Porsche-911-engine-parts-and-machining-incl--sub-categorys
Porsche 911 engine parts and machining incl. sub-categorys > Other Engine Parts
Camshaft Chain Set Porsche 911
Model: 04850P
Camshaft chain set Porsche 911
Chain rail set Porsche 911
Model: 04851P
Chain rail set Porsche 911, please state engine type
Chain Tensioner Hydraulic Porsche 911
Model: 04853P
Chain tensioner hydraulic Porsche 911, one piece
Chain Tensioner Mechanic Porsche 911
Model: 04852P
Chain tensioner mechanic Porsche 911, one piece
Conversion Kit Chain Tensioner Hydraulic Porsche 911
Model: 04854P
Conversion kit chain tensioner hydraulic Porsche 911, set for one engine
Crankshaft Porsche 911 2,0 liter used, regrindet, without exchange
Model: 80000P
Crankshaft Porsche 911 for 2,0 liter engine with.
This crankshaft are regrinded on the 1st undersize (0,25mm) on mainbearings taps 1 to 7 and all rod taps.
Crankshaft Porsche 911 T 2,2 liter 125hp 1970-1971
Model: 80000P
Crankshaft Porsche 911 T for 2,2 liter engine with 125hp, from 1970 until 1971.
This crankshaft is repired and regrinded on the 1st undersize (0,25mm) on mainbearings taps 1 to 7 and all rod taps.
One tap of rodbearing was chromed up before.
Flywheel bolts Porsche 911 2,0
Model: 23077P
Flywheel bolts Porsche 911 2,0, for one engine
21
06/2016
Porsche-911-engine-parts-and-machining-incl--sub-categorys
Porsche 911 engine parts and machining incl. sub-categorys > Other Engine Parts
Flywheel bolts Porsche 911 2,2-3,0
Model: 23078P
Flywheel bolts Porsche 911 2,2-3,0, for one engine
Flywheel bolts Porsche 911 3,0-3,6
Model: 23079P
Flywheel bolts Porsche 911 3,0-3,6, for one engine
Flywheel Porsche 911 NEW, all versions
Flywheel Porsche 911 NEW, all versions, please ask for prices.
Gasket oil screen Porsche 911
Model: 16169P
Gasket oil screen Porsche 911 (set = 2 gaskets)
Intermediate shaft Porsche 911
Model: 05153P
Intermediate shaft Porsche 911, set for one engine
Oil Pump Porsche 911 1966-1975
Model: 16190P
Oil Pump Porsche 911 1966-1975.
The larger oil pump 16190P up to 1976 should be used (case must be modified with extra bypass).
Oil Pump Porsche 911 1976-1989 (large)
Model: 16191P
Oil Pump Porsche 911 1976-1989.
The larger oil pump can be use with older cases too if case will be modified with bypass.
Oil Pump Porsche 911 3,2 Carrera 1984-1989
Model: 16177P
Oil pump Porsche 911 3,2 Carrera 1984-1989
22
06/2016
Porsche-911-engine-parts-and-machining-incl--sub-categorys
Porsche 911 engine parts and machining incl. sub-categorys > Other Engine Parts
Oil Pump Porsche 964/933 1989-1998
Model: 16178P
Oil pump Porsche 964/933 1989-1998
Oil return pipe flexible Porsche 911
Model: 16176P
Oil return pipe flexible Porsche 911
Oil return pipe Porsche 911
Model: 16175P
Oil return pipe Porsche 911 (need four p/c for one engine!)
Rocker Porsche 911
Model: 04766P
Rocker Porsche 911, one piece
Rocker Shaft Porsche 911
Model: 04767P
Rocker shaft Porsche 911, one piece
Rod Bolts with Nuts Porsche 911 2,0
Model: 07201P
Rod bolts with nuts Porsche 911 2,0, for one engine
Rod Bolts with Nuts Porsche 911 2,2
Model: 07202P
Rod bolts with nuts Porsche 911 2,2, for one engine
Rod Bolts with Nuts Porsche 911 2,4-3,0
Model: 07203P
Rod bolts with nuts Porsche 911 2,4-3,0, for one engine
23
06/2016
Porsche-911-engine-parts-and-machining-incl--sub-categorys
Porsche 911 engine parts and machining incl. sub-categorys > Other Engine Parts
Rod Bolts with Nuts Porsche 911 3,2-3,6
Model: 07204P
Rod bolts with nuts Porsche 911 3,2-3,6, for one engine
Valve Adjusting Screw Porsche 911
Model: 04755P
Valve adjusting screw Porsche 911, one piece
24
06/2016
Porsche-911-engine-parts-and-machining-incl--sub-categorys
Porsche 911 engine parts and machining incl. sub-categorys > Machining
Alignbore of engine case Posche 911 for oversize bearings
Model: 80294P
Alignbore of engine case Posche 911 for oversize bearings
Balancing Crankkshaft, Flywheel and Clutch Pressure Plate Porsche 911
Model: 80046P
Balancing crankkshaft, flywheel and clutch pressure plate Porsche 911
Balancing Crankshaft and Flywheel Porsche 911
Model: 80024P
Balancing crankshaft and flywheel Porsche 911
Balancing Crankshaft Porsche 911
Model: 80038P
Balancing crankshaft Porsche 911
Balancing Flywheel Porsche 911
Model: 80039P
Balancing flywheel Porsche 911
Balancing Flywhell and Clutch Plate Porsche 911
Model: 80154P
Balancing flywhell and clutch plate Porsche 911
Bore and hone cylinders Porsche 911
Model: 80138P
Bore and hone cylinders Porsche 911, only cast iron cylinders
Check crankshaft for demension run out and cracks Porsche 911
Model: 80126P
Check crankshaft for demension run out and cracks Porsche 911
25
06/2016
Porsche-911-engine-parts-and-machining-incl--sub-categorys
Porsche 911 engine parts and machining incl. sub-categorys > Machining
Clean 6 cylinderheads porsche 911 for machining
Model: 81020P
Clean 6 cylinderheads porsche 911 for machining.
This is sometimes possible, that we can work on your heads.
Please do averytime also make them clean much god as possible, if you send them to us.
Cleaning and blasting of six heads porsche 911.
Like to see on the pictures, this is much work, but needet for machining sometimes.
Crankshaft Regrind Porsche 911
Model: 80106P
Crankshaft Regrind Porsche 911.
Mainbearings 1-7 and all rod bearings.
Cut 6 valve seats Super Finish Porsche 911
Model: 80009P
Cut 6 valve seats with radius Porsche 911, Super Finish
Cylinder Head Rebuild Porsche 911 and Tuning I, set
Model: 80356P
Cylinder Head Rebuild Porsche 911 and Tuning I.
New valve guides, valves seats radius cut, cylinder sealing surface milled, valves grind include porting and valve polishing, price for all heads.
Achtung:
Die Stehbolzen der Zylinderköpfe nicht entfernen!
26
06/2016
Porsche-911-engine-parts-and-machining-incl--sub-categorys
Porsche 911 engine parts and machining incl. sub-categorys > Machining
Cylinder Head Rebuild Porsche 911 Tuning II 50/43mm, Satz
Model: 80384P
Cylinder Head Rebuild Porsche 911 Tuning II 50/43mm
New valve guides, new valves seats, cylinder sealing surface milled, porting and machine for larger valves inlet 50mm/ exhaust 43mm with 8mm stems, price for all
heads.
Valves for must bought extra!
Cylinder Head Rebuild Porsche 911 Tuning II 52/44mm, set
Model: 80385P
Cylinder Head Rebuild Porsche 911 Tuning II 52/44mm
New valve guides, new valves seats, cylinder sealing surface milled, porting and machine for larger valves inlet 52mm/ exhaust 44mm with 8mm stems, price for all
heads.
New valves for add. cost.
27
06/2016
Porsche-911-engine-parts-and-machining-incl--sub-categorys
Porsche 911 engine parts and machining incl. sub-categorys > Machining
Cylinder Head Rebuild Porsche 911 Tuning II, Satz
Model: 80386P
Cylinder Head Rebuild Porsche 911 Tuning II
New valve guides, new valves seats, cylinder sealing surface milled, porting, price for all heads.
New valves for add. price.
Cylinder Head Rebuild Porsche 911 w/o milling cylinder sealing surface, set
Model: 80307P
Cylinder Head Rebuild Porsche 911.
New valve guides, valves seats radius cut, valves grind, without milling cylinder sealing surface, set.
Attention:
All parts must deliver disassembled and cleaned.
Otherwise we can not machine your parts or only for additional cost.
Please do not remove the bolds!!!
Cylinder Head Rebuild Porsche 911, Satz
Model: 80306P
Cylinder Head Rebuild Porsche 911.
New valve guides, valves seats radius cut, cylinder sealing surface milled, valves grind, set.
Attention:
All parts must deliver disassembled and cleaned.
Otherwise we can not machine your parts or only for additional cost.
Achtung:
Die Stehbolzen der Zylinderköpfe nicht entfernen!
28
06/2016
Porsche-911-engine-parts-and-machining-incl--sub-categorys
Porsche 911 engine parts and machining incl. sub-categorys > Machining
Drilling of Twin Plugs Porsche 911
Model: 80129P
Drilling of twin plugs Porsche 911, all 6 heads
M12
Achtung:
Bearbeitungtechinsch kann es durch das alter Ihrer Zylinderköpfe möglich sein, das beim Zusatzgewinde Kühlrippen abbrechen.
Diese Verantwortung liegt bei Ihnen!
Flywheel Leighten and Balancing Porsche 911
Model: 80116P
Flywheel leighten and balancing Porsche 911
Grinding of Friction Surface Porsche 911 Flywheel
Model: 80082P
Grinding of friction surface Porsche 911 flywheel
Hone Cylinders Porsche 911, Fresh Up
Model: 80109P
Hone cylinders Porsche 911, fresh up, all 6
Hot Tank Part Cleaning Porsche 911 15 minutes
Model: 81010P
Hot Tank Part Cleaning Porsche 911
Machine Porsche 911 case for bigger cylinders
Model: 80013P
Machine Porsche 911 case for bigger cylinders, price for machining with new piston and cylinders from us, other diameters different price.
With some of the piston/cylinder for other engine versions you must machine you case for more stroke!
Milling bypass to use bigger oil pump Porsche 911 1966 to 1976 cases
Model: 80167P
Milling bypass to use bigger oil pump Porsche 911
Case bypass modification to use the larger oil pump from 1976 on.
Including parts.
Oversize valve seat Porsche 911 head one p/c - add. cost
Model: 80089P
Oversize valve seat Porsche 911 head for one p/c - add. cost, price only in combination with standard head rebuild!
29
06/2016
Porsche-911-engine-parts-and-machining-incl--sub-categorys
Porsche 911 engine parts and machining incl. sub-categorys > Machining
Polishing of used Crank Journals Porsche 911
Model: 80163P
Polishing of used Crank Journals Porsche 911
Porsche 911 cylinder heads machine to bigger ports
Model: 80360P
Porsche 911 cylinder heads machine to bigger ports, machining all 6 heads, intake and exhaust side.
Also to add with our other cylinder head machining.
Porsche 911 lighten, weight correction and shotblasting of rods
Model: 80127P
Porsche 911 lighten, weight correction and shotblasting of rods, set for one engine.
Machining of your rods!
Lighten round 70 gramms for each!
Pull Off Crankshaft Gear Porsche 911
Model: 80060P
Pull off crankshaft gear Porsche 911
Regrind top surface Porsche 911 cylinderheads, set
Model: 80095P
In order to resurface the cylinder sealing surface of the Porsche 911 cylinder heads the opposide surface must be 100% flat to klamp the head to the milling
machine.
Through the long service time most porsche 911 cylinderheads are bend and the rocker cover side must be grind.
Before this machining the studs and valve guides must be removed and the location dowels must drilled out.
Price for one set = 6 cylinder heads.
Repair of exhaust stud Porsche 911
Model: 80209P
Repair of exhaust stud Porsche 911with helicoil
one P/C
Replace 6 valve guides inlet or exhaust Porsche 911
Model: 80099P
Replace 6 valve guides inlet or exhaust Porsche 911 (6 cylinder heads).
Oversize for additional costs.
Replace 6 Valve Seats Porsche 911
Model: 80102P
Replace 6 valve seats Porsche 911
Price only in combination with standard rebuild!
30
06/2016
Porsche-911-engine-parts-and-machining-incl--sub-categorys
Porsche 911 engine parts and machining incl. sub-categorys > Machining
Replace and produce 1 valve guide inlet or exhaust Porsche 911
Model: 80088P
Replace and produce 1 valve guide if needed, inlet or exhaust.
Price for one piece!
Replace rocker bushings Porsche 911
Model: 80132P
Replace rocker bushings Porsche 911, for one engine
Resurface flywheel flange Porsche 911
Model: 80094P
Resurface flywheel flange Porsche 911
Resurfacing case parting surface and alignbore back to standard size Porsche 911
Model: 80292P
Resurfacing caseparting surface and alignbore back to standard size if possible, Porsche 911.
Resurfacing Cylinder Heads Porsche 911
Model: 80098P
Resurfacing cylinder heads Porsche 911, price for all 6 heads.
Resurfacing Cylinder Spigots Porsche 911
Model: 80201P
Resurfacing Cylinder Spigots Porsche 911.
Check if cylinders will good fit at the case!
Rod bolts with nuts Porsche 911 2,0
Model: 07201P
Rod bolts with nuts Porsche 911 2,0, for one engine
Rod bolts with nuts Porsche 911 2,2
Model: 07202P
Rod bolts with nuts Porsche 911 2,2, for one engine
31
06/2016
Porsche-911-engine-parts-and-machining-incl--sub-categorys
Porsche 911 engine parts and machining incl. sub-categorys > Machining
Rod bolts with nuts Porsche 911 2,4-3,0
Model: 07203P
Rod bolts with nuts Porsche 911 2,4-3,0, for one engine
Rod bolts with nuts Porsche 911 3,2-3,6
Model: 07204P
Rod bolts with nuts Porsche 911 3,2-3,6, for one engine
Rod Rebuild Porsche 911 including new bolds and nuts
Model: 80118P
Rod rebuild Porsche 911, resizing big end, fitting of new bushings, including new bolds and nuts
Sand Blasting 15 minutes
Model: 81011P
Sand Blasting 15 minutes
Turning Flywheel Porsche 911
Model: 80083P
Turning flywheel before grinding Porsche 911, if needed
32
06/2016
Porsche-911-engine-parts-and-machining-incl--sub-categorys
Porsche 911 engine parts and machining incl. sub-categorys > Other Parts
High Temperature Aerosol Exhaust Paint Spray Black
Model: 20110
High Temperature Aerosol Exhaust Paint Spray Black
T-Shirt Ahnendorp
Model: 90011
T-Shirt Ahnendorp
Please select size
T-Shirt Ahnendorp Woman
Model: 90010
T-Shirt Ahnendorp Woman
Please select size
33
06/2016
Porsche-911-engine-parts-and-machining-incl--sub-categorys
Porsche 911 engine parts and machining incl. sub-categorys > Porsche 911 Exhaust (see PDF
also!)
Exhaust racing heat exchanger without heating function, Ø inner 42 mm, stainless steel
Model: 21109P
Exhaust racing heat exchanger without heating function, Ø inner 42 mm, stainless steel, set for one engine
Model Motor Year
911 S 2.4 08/71-07/73
911 S (mech. injection) 2.4 08/71-07/73
911 S (mech. injection) 2.7 08/73-07/75
911 T/E/S (not mech. injection) 2.0-2.4 01/63-07/73
911/911 S/911 Carrera 2.7 08/73-07/75
Nur noch begrenzte Stückzahlen auf Lager!
Kat-Ersatzrohr in der neuen Edelstahl Porsche 911 3,0-3,2 Liter
Model: 80000P
Kat-Ersatzrohr in der neuen Edelstahl Version für den Porsche 911 3,0-3,2 Liter Motor.
Innenaufbau strömungsgünstig optimiert.
Inklusive Gewinde für die Lambdasonde (Verschluss-Schraube wird mitgeliefert).
Ab jetzt auf Lager, Preis 265 Euro.
Porsche 911 2,0-2,7 Dynomax sport exhaust system
Model: 21120P
Porsche 911 2,0-2,7 Dynomax sport exhaust system.
This system will be one of the best way if you want to combinate much hp and torque.
The headers are made with a exact diameter for Porsche 911 engines from 2,0 to 2,4 liters.
Because the silencer also use some of the finest pruducing technic it is very compact but you get also much more flow.
The sound is very deep.
Delivery like the pictures.
Complete system is coated.
911 S 2.4 08/71-07/73
911 S (mech. Einspritzung) 2.4 08/71-07/73
911 S (mech. Einspritzung) 2.7 08/73-07/75
911 T/E/S (keine mech. Einspritzung) 2.0-2.4 01/63-07/73
911/911 S/911 Carrera 2.7 08/73-07/75