Dyna Family - Silicon Motion
Transcription
Dyna Family - Silicon Motion
Mobile Storage Dyna Family ‑ Card Reader Controllers SM331L Key Features USB2.0 SD/MMC Flash Memory Card Reader Controller Adheres to Universal Serial Bus Specification Revision 2.0 Overview Adheres to USB Mass Storage Class Bulk-only Transport specification v1.0 The SM331L, a high performing USB2.0 Flash memory card reader controller, is compatible with most up to date SDHC (SD2.0), MMC4.2. All Flash memory card host Supports high-speed (480Mbps) and full-speed (12Mbps) data transmissions Flash Memory card supports: interfaces utilize the maximum data transmission rate. - Secure-Digital™ (SD) v1.0/v1.1/v2.0 Equipped with high-integration 0.16µm process technology, the SM331L built-in PowerMost FETs for - Multi-Media Card™ (MMC) specification v3.x/v4.0/v4.1/v4.2 • SDHC, SD, Mini SD™ and Micro SD™ memory card power and 5v/3.3v, 3.3v/1.8v regulators for core logic and memory card power to lower material costs. The built-in Voltage Drop Detector (VDT) protects the Single 5v operation SM331L if a damaged Flash memory card is inserted. Built-in 5v/3.3v and 3.3v/1.8v voltage regulators Built-in 1.8v POR (Power-On-Reset) Built-in PowerMost FETs offering Flash memory card power Supports USB suspend/resume Operation LED indicators under Windows98 and 2000 SP1/SP2. The SM331L is optimized for system communication with Flash memory Single 12MHZ clock input Supports hardware Error Correction Code (ECC) media, and is appropriate for either standalone card reader stations or embedded systems such as desktop and laptop PCs, game consoles, LCD TVs and photo printers. Supports hardware Cyclic Redundancy Check (CRC) The SM331L is driverless compatible with most common operating systems, including Windows Vista, XP, 2000, ME, WinCE5.0, MAC10x and Linux Redhat This Flash memory card reader is supported by the SMI vendor driver Applications • MMC, High-Speed Multi Media Card™ (HS-MMC), RS MMC and MMC Micro, MMC-mobile Target Performance (high-speed) Package USB2.0 SD/uSD/MMC card reader SDHC sustained read rate: 20MB/s* SSOP28 (209mil) SD/uSD/MMC card reader for embedded system SDHC sustained write rate: 16MB/s* TQFN28 (4mm×4mm×0.75mm) *Figures may vary between test platforms and Flash chips. Die for COB application www.siliconmotion.com This publication, including all photographs, illustrations and software, is protected under international copyright laws, with all rights reserved. Neither this publication, nor any of the material contained herein, may be reproduced without written consent of the manufacturer. © Copyright 2008 Silicon Motion, Inc. Mobile Storage Dyna Family ‑ Card Reader Controllers SM331L Block Diagram 5V/3.3V 1.8V OUT 3.3V OUT 3.3V IN Analog Part 3.3v to 1.8v Reg. 5v to 3.3v Reg. (300mA max.) CORE LOGIC Card Host 8051 3.3V PMOS (200mA max.) PWR 1 (3.3V) ROM 16Kbyte Card 1 SDHC/MMC 1.8V IN SRAM 512Bx2 3.3V IN (I/O) 2 0 MAC (Media Access Controller) 12MHz USB . PHY USB Host Device 1.8V POR SM331L Application Block Diagram USB Host ► Personal Computer Laptop PC Tablet PC ...... www.siliconmotion.com ◄ Memory Card Host: SM331L SDHC/MMC Flash Memory Card Reader Digital Camera MP3 PMP Game Console Cellular Phone ...... This publication, including all photographs, illustrations and software, is protected under international copyright laws, with all rights reserved. Neither this publication, nor any of the material contained herein, may be reproduced without written consent of the manufacturer. © Copyright 2008 Silicon Motion, Inc.