Heat Recovery Service - DECONINCK

Heat Recovery
In a lot of companies energy is often lost as
waste heat through the chimney. Together
with you, Deconinck-Wanson finds the best
way to recover this waste heat.
Deconinck-Wanson offers you the
following:
• recovery units tailored to your needs
• waste heat recovery for steam and hot
water production
• combination with combined heat and power
(CHP) possible
• significant drop in your energy bill!
Service
• boilers tailored to your needs
• compleet assembly and installation
• all additional equipement possible on
request (condens tank, deaerator, flash
tank, chimney, economiser, flue gas cooler,
water treatment...)
• mobile unit rental
• boiler and burner maintenance of all types
• repair, revision, spare parts
• 2nd hand boilers
• energy studies
Visit our new website
WWW.DECONINCK.COM
CONTACT
Deconinck-Wanson
Legen Heirweg 43
9890 Gavere
België
Tel: +32 9 384 63 27
Fax: +32 9 384 69 82
[email protected]
WWW.DECONINCK.COM
Steambloc®
Vaporax®
Thermopac®
Deconinck-Wanson Steambloc® steam
boilers are three pass shell boilers
constructed from high quality materials, in our
own work shop and according to the latest
quality demands.
• operating pressure up to 20 bar (higher on
request)
• high steam quality
• high efficiency (93% without economiser,
95% with economiser)
• longevity
• easy maintenance
• large steam and water content
Deconinck-Wanson Vaporax® steam
generators have a compact construction and
high efficiency. The limited water content
results in a fast startup.
• minimal needed construction surface
• no deposit in coil due to high velocities in
coill
• high steam quality due to attached water
seperator
• efficiency up to 90% without economiser
• type LN & 3R:
300 kg/h to 5000 kg/h
up to 70 bar
• type RR:
for export
250 kg/h to 8000 kg/h
up to 70 bar on request
• type HP:
220 kW to 2300 kW
up to 90 bar (higher on request)
Deconinck-Wanson Thermopac® thermal oil
heaters are three pass and for pass coiled
heater with a high efficiency.
An oil temperature till 400°C is possible.
• compact construction, minimal needed
surface
• precise control of temperature
• high efficiency
• heat recovery possible
• vertical or horizontal version possible
• type HS:
250 kg/h tot 1 500 kg/h
semi-wetback reversal chamber
• type HH:
1 500 kg/h tot 30.000 kg/h
full wetback reversal chamber
• type B:
only for export
230 kW to 7000 kW
• type BH:
for export and Europe
290 kW to 7000 kW
• type LN & LNE:
answers to the strictest European
requirements