Professional Measuring Technology

Transcription

Full Range For 2012/2013
Robert Bosch Limited
Marketing CST/berger
PO Box 98
Uxbridge
Middlesex, UB9 5HN
United Kingdom
1619EA6617 – EN – Printed in the Federal Republic of Germany – Subject to technical alterations. No liability is accepted for printing errors.
Professional
Measuring Technology
www.cstberger.com
Rotation lasers
2 | Table of contents
Table of contents
4Symbols
4
Product index
5
Rotation lasers
6
Rotation lasers
15
Rotation laser receivers
18
Accessories for rotation lasers
1
2
20 Pipe laser
21
Pipe laser
22
Accessories for pipe laser
3
23Line lasers
24
Line lasers
30
Line laser receivers
31
Accessories for line lasers
4
32Point lasers
33
Point lasers
5
34Total stations
35Total stations
36
Accessories for total stations
6
39Theodolites
40Theodolites
40
Accessories for theodolites
Table of contents | 3
Table of contents
7
41 Optical levels
42
Optical levels
8
45 Laser rangefinders
46
Laser rangefinders
9
47 Measuring wheels
48
Measuring wheels
10
50 Magnetic locators
51
Magnetic locators
11
53Tripods
54Tripods
59
Tripod accessories
12
60Staffs and “cut & fill” rods
61
Staffs and “cut & fill” rods
62Accessories for staffs and “cut & fill” rods
13
63Accessories
64
Prism poles
65
Accessories for poles
65Adapters
4 | Symbols and product index
Symbols and product index
Symbols
Scanning Mode with Preset Angles
Variable Rotation Speed
Automatic/Manual Mode
Clockwise and Anti Clockwise
Rotation Head Drive
Anti-Drift System
Plumb Beam
Product index
61
61
61
61
62
48
48
0–9
06-804M
06-805M
06-805MII
06-907M
06-TLMB
32-401M
32-416M
A
56 ALELT20
6ALGRD
12 ALH
9ALHV
9ALHVD
8ALHVG
8ALHVGD
54 ALQCI20-B
54 ALQCI40-B
55 ALQRI10-ELAZ
56 ALQRI20-ELAZ
55 ALQRI20-B
C
35 CST302R
35 CST305R
D
40 DGT10
40 DGT2
F
57 FGHD20
G
24 GIZLT-3
I
24 ILMXL
25 ILMXT
25 ILMXTE
26 ILMXTG
31
15
15
16
16
17
29
30
28
10
13
14
21
58
L
LD3
LD400
LD440
LD440G
LD500
LD90
LL20
LLD20
LM2
LM800DPI
LM800GR
LMH-CU
LMPL20
LP12-UM
51
51
52
52
57
33
M
Magna-Trak 100
Magna-Trak 102
Magna-Trak 200
Magna-Trak 202
MCTE-ELAZ20
MP3
42
42
42
42
P
PAL22D
PAL22G
PAL26D
PAL26G
R
22 RC20
18 RC400X
18 RC700
17 RD5
46 RF25
46 RF5
11 RL25H Set
7RL25HV
7 RL25HV Set
18 RM7
49 RT312M
49 RT412D
43
43
43
43
44
44
44
44
S
SAL20ND
SAL20NG
SAL24ND
SAL24NG
SAL28ND
SAL28NG
SAL32ND
SAL32NG
W
58 WDW20HV-ON
30
27
27
33
X
XLD2
XLP34
XLP34PKG
XP5
6 | Rotation lasers
Electronic self-levelling rotation laser with plumb beam –
1
dual-grade capable in both horizontal and vertical positions
Rotation lasers: Grade laser
Digital display for exact setting of grades
Dual-grade capability of ± 10% in both horizontal and vertical positions using
keypad and remote control
Exceptionally high accuracy, long range, robust and waterproof
Additional features
Plumb beam
Clearly visible laser beam
Plumb function in horizontal and vertical modes
Anti-Drift System
Handle can be used in the ‘laydown’ position for vertical applications
Manual grade capability of ± 10% using keypad
ALGRD
Applications
Civil engineering
Landscaping
Elevation marking, bricklaying,
transferring heights
Suspended ceiling installation
Drywall installation
Scope of delivery
1
Transferring right angles and
alignment
Setting up batter boards
Technical specifications
ALGRD
LD440 laser receiver with bracket (F 034 069 100)
3
Part number
F 034 061 EN0
RC400X remote control (F 034 069 AN7)
3
Laser diode
635 nm
1 x NiMH battery pack (1 608 M00 1NA)
3
Laser class
2M
Charger with EU/UK power cable (1 608 M00 2NE)
3
Working range with laser receiver
425 m (radius)
4 x 1.5 V LR6 (AA)
3
Hard carry case (1 608 M00 05M)
3
Accuracy
± 0.05 mm/m horizontal
± 0.1 mm/m vertical
Self-levelling range
± 5°
Dust and splash protection
IP67
Rotation speed
0–1000 rpm
Power supply
4 x 1.5 V LR20 (D)1 or
4 x 1.2 V HR20 (D) (NiMH batteries)
Operating time (max.)
Non-rechargeable batteries 60 h1
Rechargeable batteries (NiMH) 30 h
Tripod connection
5/8"
Length
160 mm
Width
160 mm
Height
215 mm
Weight
2.7 kg
can only be used together with a non-rechargeable battery holder (1 608 M00 05R)
Rotation lasers | 7
with single-slope capability
Self-levelling: horizontal and vertical
Robust design to protect against vibrations and falls
High precision and long range for outdoor applications
Additional features
Efficient protection against dust and splash water
Suitable for slopes of ± 8% to enable more versatility on the jobsite
User-friendly keypad design
RL25HV, RL25HV Set
Applications
Excavation, structural work,
formwork
Façade design
Installing partition walls
Interior fitting work
Scope of delivery
1
1
Landscaping
Screeding
Alignment in terrain
RL25HV, RL25HV Set
RD5 laser receiver with bracket (F 034 069 0N9)
3
Part number
F 034 061 0N6, F 034 061 0N5
RM7 remote control (F 034 069 0N1)
3
Laser diode
635 nm
Laser glasses
3
Laser class
2
Magnetic targets
3
225 m (radius)
V-Mount
3
Alkaline Tray (1 608 M00 9N0)
31
Accuracy
NMB1 (1 608 M00 1N0)
3
± 5°
IP56
Rotation speed
0, 150, 300, 600 rpm
Power supply
3 x 1.5 V LR20 (D) or
Non-rechargeable batteries 55 h
Tripod connection
5/8"
Length
200 mm
Width
220 mm
Height
190 mm
Weight
2.3 kg
CHNM1 charger with EU/UK power cable
(1 608 M00 2N2)
3
Hard carry case (1 608 M00 0N0)
3
only with RL25HV Set
1
Rotation lasers: Horizontal and vertical laser
The robust solution for precise outdoor levelling
8 | Rotation lasers
Electronic self-levelling rotation laser with green beam –
1
with plumb beam, dual-slope capable in both horizontal
and vertical positions
Exceptionally high visibility due to green laser beam
Dual-slope capable in both horizontal and vertical positions
Additional features
Plumb beam
Anti-Drift System
Axis alignment in vertical mode using keypad and remote control
Cross-axis levelling
Manual slope capability of ± 10% using keypad
ALHVG, ALHVGD
Applications
Civil engineering
Landscaping
Scope of delivery
1
2
3
alignment
ALHVG, ALHVGD
LD440G laser receiver with bracket (F 034 069 1N1)
33
Part number
F 034 061 BN9, F 034 061 BN8
RC700 remote control (F 034 069 A00)
3
Laser diode
532 nm
Laser glasses (1 608 M00 7N6)
3
Laser class
3R
2 magnetic targets (1 608 M00 8NC)
3
200 m (radius)
V-Mount (F 034 092 CN2)
3
3
Accuracy
3
± 5°
2 x 1.5 V LR6 (AA)
32
IP67
4 x 1.5 V LR6 (AA)
33
Rotation speed
150, 300, 600 rpm
3
Power supply
4 x 1.5 V LR20 (D)1 or
15 h1
Tripod connection
5/8"
Length
160 mm
Width
160 mm
Height
215 mm
Weight
2.5 kg
only with ALHVG
only with ALHVGD
Rotation lasers | 9
dual-slope capable in both horizontal and vertical positions
Additional features
Plumb beam
Anti-Drift System
Handle can be used in the ‘laydown’ position for vertical applications
ALHV, ALHVD
Applications
Civil engineering
Landscaping
Scope of delivery
1
2
3
alignment
ALHV, ALHVD
33
Part number
F 034 061 B00, F 034 061 B01
3
Laser diode
635 nm
3
Laser class
2M
2 magnetic targets (1 608 M00 8NB)
3
425 m (radius)
V-Mount (F 034 092 CN2)
3
3
Accuracy
3
± 5°
2 x 1.5 V LR6 (AA)
32
IP67
4 x 1.5 V LR6 (AA)
33
Rotation speed
150, 300, 600 rpm
3
Power supply
4 x 1.5 V LR20 (D)1 or
batteries (NiMH) 30 h
Tripod connection
5/8"
Length
160 mm
Width
160 mm
Height
215 mm
Weight
2.5 kg
only with ALHV
only with ALHVD
1
Electronic self-levelling rotation laser with plumb beam –
10 | Rotation lasers
Electronic self-levelling rotation laser with upward and downward
1
plumb beam – dual-slope capable in both horizontal and vertical
positions
Dual-slope capable in both horizontal and vertical positions
Exceptionally high accuracy
Exceptionally long range
Additional features
Robust and waterproof
Plumb beam
Highly visible diode
Plumb function in vertical and horizontal modes
LM800DPI
Applications
Structural work, formwork,
screeding
Scope of delivery
Transferring right angles
Alignment
Pits
LM800DPI
3
Part number
F 034 061 9NE
3
Laser diode
635 nm
3
Laser class
2M
3
425 m (radius)
V-Mount (F 034 092 CN2)
3
1 x NiMH battery pack (1 608 M00 1N9)
3
Accuracy
3
± 5°
2 x 1.5 V LR6 (AA)
3
IP55
1 x 9 V 6LR61 Block
3
Rotation speed
150, 300, 600 rpm
Hard carry case (1 608 M00 05P)
3
Power supply
1 x 7.2 V (2600 mAh)
(NiMH batteries)
15 h
Tripod connection
5/8"
Length
159 mm
Width
162 mm
Height
203 mm
Weight
2.5 kg
Available until the end of 2012.
Rotation lasers | 11
The robust solution for precise outdoor levelling
1
Additional features
Efficient protection against dust and splash water
Manual single-slope capability of ± 8% to enable more versatility on the jobsite
User-friendly keypad design
RL25H Set
Applications
Excavation, structural work,
formwork
Landscaping
Screeding
Alignment in terrain
Scope of delivery
RL25H Set
RD5 laser receiver with bracket (F 034 069 0N9)
3
Part number
F 034 061 0NE
NMB1 (1 608 M00 1N0)
3
Laser diode
635 nm
Laser class
2
CHNM1 charger with EU/UK power cable
(1 608 M00 2N2)
3
225 m (radius)
Hard carry case (1 608 M00 0N0)
3
Accuracy
± 5°
IP56
Rotation speed
600 rpm
Power supply
3 x 1.5 V LR20 (D) or
Non-rechargeable batteries 85 h
Tripod connection
5/8"
Length
200 mm
Width
220 mm
Height
190 mm
Weight
2.3 kg
Rotation lasers: Horizontal laser
Self-levelling: horizontal
Robust design to protect against vibrations and falls
High precision and long range for outdoor applications
Electronic self-levelling rotation laser –
1
horizontal single-slope capable
Additional features
Anti-Drift System
ALH
Applications
Construction
Landscaping
Foundations
Walls, elevation marking
Grading
Scope of delivery
1
ALH
3
Part number
F 034 061 A00
3
Laser diode
650 nm
3
Laser class
2M
2 x 1.5 V LR6 (AA)
3
425 m (radius)
3
Accuracy
± 0.05 mm/m
± 5°
IP67
Rotation speed
600 rpm
Power supply
4 x 1.5 V LR20 (D)1 or
Tripod connection
5/8"
Length
160 mm
Width
160 mm
Height
215 mm
Weight
2.5 kg
Electronic self-levelling rotation laser –
1
horizontal dual-slope c
apable
Horizontal dual-slope capable
Exceptionally high accuracy
Exceptionally long range
Additional features
Highly visible diode
LM800GR
Applications
Civil engineering
Building a patio
Driveways and paving
Walls
Elevation marking
Grading
Landscaping
Scope of delivery
LM800GR
3
Part number
F 034 061 9NG
3
Laser diode
650 nm
1 x NiMH battery pack (1 608 M00 1N9)
3
Laser class
2M
3
425 m (radius)
2 x 1.5 V LR6 (AA)
3
Accuracy
1 x 9 V 6LR61 Block
3
± 5°
Hard carry case (1 608 M00 05N)
3
IP55
Rotation speed
600 rpm
Power supply
1 x 7.2 V (2600 mAh)
(NiMH batteries)
15 h
Tripod connection
5/8"
Length
159 mm
Width
162 mm
Height
203 mm
Weight
2.5 kg
Electronic self-levelling rotation laser
1
Fast levelling – at the push of a button
Splashproof housing
Automatic horizontal self-levelling
Additional features
Anti-Drift System
Easy operation
LMH-CU
Applications
Civil engineering
Walls
Elevation marking
Landscaping
Building a patio
Scope of delivery
LMH-CU
3
Part number
F 034 061 700
3
Laser diode
650 nm
3
Laser class
2M
1 x 9 V 6LR61 Block
3
305 m (radius)
Hard carry case (1 608 M00 05N)
3
Accuracy
± 0.08 mm/m
± 3°
IP54
Rotation speed
600 rpm
Power supply
4 x 1.5 V LR20 (D)1 or
Tripod connection
5/8"
Length
160 mm
Width
160 mm
Height
215 mm
Weight
2.5 kg
1
Universal bracket for mounting on square, round and oval measuring rods or
similar
Front and back displays
Three levels of sensitivity
Additional features
Three levels of speaker volume
Universal bracket for mounting on measuring rods
Robust rubber-coated housing
Automatic shutdown after 5–8 minutes
Applications
Can be used with the following rotation lasers: LMH-CU, LM800GR, LM800DPI
LD400
Scope of delivery
LD400
Bracket (F 034 092 BN7)
3
Part number
F 034 069 000
1 x 9 V 6LR61 Block
3
Range
425 m
Power supply
1 x 9 V 6LR61 Block
IP55
Accuracy of reception range
0.75/1.5/3.0 mm
Length
25 mm
Width
76 mm
Height
169 mm
Weight
275 g
Professional universal laser receiver for rotation lasers
for all applications
Seven-channel height display indicates the position of the LD440 in relation to
the plane of the laser beam
Direction memory (displays the side on which the laser signal has left the
laser reception range)
Electronic filter (protects against direct sunlight and electromagnetic radiation)
Additional features
Three levels of measuring accuracy
Magnets for ceiling applications
Applications
Can be used with the following rotation lasers: ALH, ALHV, ALGRD
LD440
Scope of delivery
LD440
3
Part number
F 034 069 100
2 x 1.5 V LR6 (AA)
3
Range
425 m
Power supply
2 x 1.5 V LR6 (AA)
IP67
0.75/1.5/3.0 mm
Length
30 mm
Width
78 mm
Height
154 mm
Weight
0.25 kg
From October 2012 with RB1.
1
Rotation lasers: Rotation laser receiver
Robust and accurate universal laser receiver
Professional universal laser receiver for lasers with a green beam
1
Seven-channel height display indicates the position of the LD440G in relation
to the plane of the laser beam
Electronic filter (protects against direct sunlight and electromagnetic
radiation)
Additional features
Applications
Can be used with rotation lasers with a green beam: ALHVG, ALHVGD
LD440G
Scope of delivery
LD440G
3
Part number
F 034 069 1N1
2 x 1.5 V LR6 (AA)
3
Range
425 m
Power supply
2 x 1.5 V LR6 (AA)
IP67
0.75/1.5/3.0 mm
Length
30 mm
Width
78 mm
Height
154 mm
Weight
0.25 kg
Electronic machine control receiver for rotation lasers
Strong magnets for mounting on excavators etc.
Extra large 13 cm reception field
240° field of reception
Additional features
Display lighting
Sturdy Lexan housing: designed for harsh construction applications
Applications
Can be used with rotation lasers with a red beam
LD500
Scope of delivery
LD500
3
Part number
F 034 069 9N0
2 x 1.5 V LR6 (AA)
3
Range
200 m
Power supply
2 x 1.5 V LR6 (AA)
IP54
5/10/25 mm
Length
170 mm
Width
110 mm
Height
40 mm
Weight
0.8 kg
Rotation laser receiver
1
Additional features
Applications
Can be used with the following rotation lasers: RL25H, RL25HV
RD5
Scope of delivery
RD5
RB 1 bracket (1 608 M00 7N0)
3
Part number
F 034 069 0N9
2 x 1.5 V LR6 (AA)
3
Range
400 m
Power supply
2 x 1.5 V LR6 (AA)
IP57
± 0.5/1/2 mm
Length
30 mm
Width
78 mm
Height
154 mm
Weight
0.25 kg
Laser receiver for indoor and outdoor use
Sturdy magnets for ceiling applications
Clearly visible blue LED that acts as a centre mark
Robust rubber-coated housing, protected against water and dust
Additional features
Two levels of speaker volume
Applications
Can be used with rotation lasers with a red beam
LD901
Scope of delivery
1
LD90
Bracket
3
Part number
F 034 069 4N0
1 x 9 V 6LR61 Block
3
Range
150 m
Power supply
1 x 9 V 6LR61 Block
+/-1.5 / +/-3.0 mm
Length
132 mm
Width
57 mm
Height
30 mm
Weight
0.2 kg
available until 31.12.2012
Easily attached to a staff using the bracket
Clear display showing all necessary information
LED height indicator
Rotation lasers: Accessories
1
Remote controls
RC400X
Remote control. Range of 30 m.
Suitable for
ALGR
Part number
F 034 069 AN7
RC700
Remote control. Range of 30 m. Setting the rotation speed. Aligning
the vertical plane.
Suitable for
ALH, ALHV, ALHVG, LM800
Part number
F 034 069 A00
RM7
Remote control.
Suitable for
RL25H, RL25HV
Part number
F 034 069 0N1
V-Mount
Wall mount for use on ceilings and walls
For mounting lasers during interior fitting work. 5/8" thread, with
clamp for mounting on ceilings or wall studs.
Suitable for
Rotation, line and point lasers with 5/8" tripod fitting
Part number
F 034 092 CN2
Wall mount
Chargers, batteries and battery holders
57-CHNMEU
Universal charger for rotation lasers.
Suitable for
AL series, LM800
Part number
1 608 M00 2NE
CHNM1
Charger for rotation lasers.
Suitable for
RL25H, RL25HV
Part number
1 608 M00 2N2
57-NMB700
Battery (nickel metal hydride) 4 x 1.2 V HR20 (D).
For use with rotation lasers.
Suitable for
AL series, LMH series
Part number
1 608 M00 1NA
57-NMB1000
Battery (nickel metal hydride) 1 x 7.2 V (2600 mAh).
Suitable for
LM800
Part number
1 608 M00 1N9
NMB1
Battery (nickel metal hydride).
Suitable for
RL25H, RL25HV
Part number
1 608 M00 1N0
NMB1 Set
Battery (nickel metal hydride) and charger.
Suitable for
RL25H, RL25HV
Part number
1 608 M00 2N0
Non-rechargeable
battery holder
Holder for alkaline batteries.
Suitable for
Part number
1 608 M00 05R
Alkaline Tray
Holder for alkaline batteries.
Suitable for
RL25H, RL25HV
Part number
1 608 M00 9N0
Laser glasses
GLASSES
Laser glasses.
For better visibility of the red laser beam in bright conditions and over
longer distances.
Suitable for
AL series, LM800
Part number
1 608 M00 7N5
GLASSES-G
Laser glasses.
For better visibility of the green laser beam in bright conditions and
over longer distances.
Suitable for
Part number
1 608 M00 7N6
TARGET
Target for lasers with a red beam.
Target for use with lasers during interior work. With magnetic base for
attaching to ceiling T-bars and wall studs. With cm and inch graduations.
Suitable for
Lasers with a red beam
Part number
1 608 M00 8NB
TARGET-G
Target for lasers with a green beam.
Target for use with lasers during interior work. With magnetic base for
attaching to ceiling T-bars and wall studs. With cm and inch graduations.
Suitable for
Lasers with a green beam
Part number
1 608 M00 8NC
Targets
Brackets for laser receivers
RB400
Bracket for laser receiver.
Suitable for
LD400, LLD20
Part number
F 034 092 BN7
RB440
Suitable for
LD440, LD440G, XLD2
Part number
F 034 092 BN8
RB500
Suitable for
LD500
Part number
F 034 092 BN9
RB1
Suitable for
RD5, LD440, LD440G, XLD21
Part number
1 608 M00 7M0
58-LGA
Laser grade adapter with 0° – 90° display.
Sets the laser to the desired grade. ±10-minute display.
5/8"-11 thread.
Suitable for
ALH, ALHV, ALHVG, ALGRD, LM800DPI, LM800GR, LMH-CU, RL25H,
RL25HV
Part number
F 034 092 6N1
Laser grade adapter
1
From October 2012.
Rotation lasers: Accessories
1
Pipe laser
Pipe laser | 21
jobsite conditions
Long-range remote control and large display
Dual-slope capability of ± 10% in horizontal position using keypad and remote
control
Exceptionally high accuracy and long working range
Additional features
Electronic self-levelling
LED plumb reference
LMPL20
Applications
Manhole and sewer construction
Can be used in the pipe, on the pipe
or in the manhole
Scope of delivery
LMPL20
RC20 remote control (F 034 069 PN1)
3
Part number
F 034 062 2N1
Target set (1 608 M00 8NE)
3
Laser diode
635 – 650 nm
12 V cable PLPC20 (1 608 M00 3N4)
3
Laser class
3R
Leg set1
3
1 x NiMH battery pack (1 608 M00 1NK)
3
Charger with EU/UK power cable set
3
Accuracy
± 10 arc seconds at 25 °C
(± 1 arc second / 1 °C temperature
difference)
Hard carry case
3
Working range
200 m
Grade range
–15% to +40%
Line range
± 15%
IP57
Power supply
NiMH battery pack/
4 x D cell batteries
40 h/60 h
Length
400 mm
Width
160 mm
Height
160 mm
Weight
4.8 kg
Length of legs:
200 mm pipe diameter: 36.9 mm
1
2
Pipe laser
Robust, self-levelling pipe laser for the most demanding
22 | Pipe laser
Remote control for LMPL20 pipe laser
Pipe laser: Remote control and accessories
2
Robust, waterproof housing
Long working range
Two-way radio communication provides real-time data exchange between the
remote control and the pipe laser
Applications
Grade control
Line control
Menu functions
Battery indicator
Standby and operating modes
Pipe laser lock (anti-tamper)
Pulse mode
RC20
Scope of delivery
3 x 1.5 V LR03 (AAA)
3
RC20
Part number
F 034 069 PN1
Range, remote control
Up to 200 m
Power supply
3 x 1.5 V LR03 (AAA)
Weight
0.2 kg
Accessories for pipe lasers
59-PLMHT
Manhole mount for the pipe laser.
Suitable for
LMPL20
Part number
F 034 092 GN0
59-PLTRIVET
Trivet plate mount that acts as a platform for the pipe laser in the
manhole. Easy height adjustment to suit the pipe elevation.
Suitable for
LMPL20
Part number
F 034 092 EN1
59-NMH20
Rechargeable battery pack. NiMH. 4.8 volts.
Suitable for
LMPL20
Part number
1 608 M00 1NK
59-PLBP20
Non-rechargeable battery pack. 4 mono cells (alkaline).
Suitable for
LMPL20
Part number
1 608 M00 1ND
59-PLPC20
Power cable. 12 volts.
Suitable for
LMPL20
Part number
1 608 M00 3N4
59-TARGET
Target set consisting of target holder, TARGET-S and TARGET-L.
The TARGET-S (11.5 x 7 cm) and TARGET-L (24.5 x 7 cm) can be slid
into the guide track of the holder from above and fixed in place using a
locking screw.
Suitable for
LMPL20
Part number
1 608 M00 8NE
59-TARGET-S
Small target (11.5 x 7 cm).
Suitable for
LMPL20
Part number
1 608 M00 8NG
59-TARGET-L
Large target (24.5 x 7 cm).
Suitable for
LMPL20
Part number
1 608 M00 8NF
Line lasers
24 | Line lasers
Self-levelling line laser for indoor and outdoor use
3
Line lasers
Horizontal levelling beam, 2 vertical plumb lines at a 90° angle
Long working range in combination with the LLD20 receiver
Manual mode for tilting
Additional features
Laser cross
Additional 90° line
GIZLT-3
Scope of delivery
GIZLT-3
Wall mount
3
Part number
F 034 063 900
Laser glasses
3
Laser diode
635 nm
3 x 1.5 V LR6 (AA)
3
Laser class
2M
Fabric bag
3
Working range
10 m
30 m
Accuracy
± 0.4 mm/m
± 4°
IP54
Power supply
3 x 1.5 V LR6 (AA)
15–25 h
Tripod connection
5/8"
Length
80 mm
Width
80 mm
Height
160 mm
Weight
0.7 kg
Small, handy line laser
Laser cross
Horizontal levelling line
Vertical plumb line
Applications
Laying floor and wall tiles
Fitting cabinets and shelves
Additional features
Comprehensive scope of delivery
ILMXL
Scope of delivery
ILMXL
Magnetic mini tripod (F 034 091 LN3)
3
Part number
F 034 063 100
3 x 1.5 V LR6 (AA)
3
Laser diode
635 nm
Fabric bag
3
Laser class
2M
Working range
15 m
Accuracy
± 0.4 mm/m
± 4°
IP54
Power supply
3 x 1.5 V LR6 (AA)
20 h
Tripod connection
1/4" x 20
Length
95 mm
Width
70 mm
Height
90 mm
Weight
0.4 kg
Line lasers | 25
Line laser for indoor and outdoor use
3
Additional features
Can also be used in bright conditions with the LLD20 receiver
Horizontal levelling beam
Vertical plumb line
Comprehensive scope of delivery
ILMXT, ILMXTE
Applications
Remodelling projects
Installing walls and pipes
Installing ceiling grids
Outdoor levelling
Scope of delivery
1
Patios
Panelling
ILMXT, ILMXTE
3
Part number
F 034 063 500, F 034 063 5N2
LLD20 laser receiver with bracket
31
Laser diode
635 nm
3 x 1.5 V LR6 (AA)
3
Laser class
2M
1 x 9 V 6LR61 Block
31
Working range
15 m
Hard carry case
3
30 m
Accuracy
± 0.3 mm/m
± 5°
IP55
Power supply
3 x 1.5 V LR6 (AA)
25 h
Tripod connection
1.4" x 20
Length
100 mm
Width
65 mm
Height
110 mm
Weight
0.9 kg
only with ILMXTE
Line lasers
Laser cross
Easy operation and high precision
Range of up to 30 m in combination with LLD20 receiver
26 | Line lasers
Line laser with green beam for professional interior fitting work
3
Line lasers
High visibility due to green laser beam
Self-levelling
Laser cross
Additional features
Horizontal levelling beam and vertical plumb line
Easy to operate thanks to one-button control
ILMXTG
Applications
Installing drywalls
Remodelling projects
Installing walls and pipes
Installing ceiling grids
Scope of delivery
ILMXTG
3
Part number
F 034 063 7N1
Charger
3
Laser diode
532 nm green
3 x NiMH batteries
3
Laser class
2M
Hard carry case
3
Working range
30 m
Accuracy
± 0.3 mm/m
± 5°
IP55
Power supply
3 x 1.5 V LR6 (AA)
10–12 h
Tripod connection
1.4" x 20
Length
100 mm
Width
65 mm
Height
110 mm
Weight
0.9 kg
Line lasers | 27
High-performance line laser for indoor and outdoor use
3
Additional features
Downward plumb beam that can be switched on separately in all operating
modes
Outdoor applications
Levelling of concrete formwork and frames, and alignment at a 90° angle
Patios and courtyards
Landscaping
Bricklaying
XLP34, XLP34PKG
Applications
Floor and wall tiles
Interior design at a 90° angle
Cabinets and shelves
Pipes and conduits
Point transfer
Scope of delivery
1
2
XLP34, XLP34PKG
3
Part number
F 034 063 800, F 034 063 8N1
XLD2 laser receiver (F 034 069 BN1)
31
Laser diode
635 nm
B-Mount
31
Laser class
2M
3
Working range
30 m
3
55 m
3 x 1.5 V LR6 (AA)
32
Accuracy
0.2 mm/m
5 x 1.5 V LR6 (AA)
31
± 3°
Hard carry case
3
IP54
Power supply
3 x 1.5 V LR6 (AA)
Tripod connection
1.4" x 20
Length
130 mm
Width
110 mm
Height
110 mm
Weight
0.7 kg
only with XLP34PKG
only with XLP34
Line lasers
Self-levelling
1 horizontal laser line plus 2 vertical laser lines arranged at a 90° angle
Downward plumb beam, upward plumb point
28 | Line lasers
Tile laser
3
Line lasers
Projects a 90° angle onto floors and walls
Projects vertical laser lines
Vertical lines are set using the adjustable feet and level vials
Additional features
Very easy to operate thanks to one-button control
LM2
Applications
Panelling
Installing drywalls
Scope of delivery
LM2
3
Part number
F 034 064 101
3 x 1.5 V LR6 (AA)
3
Laser diode
635 nm
Fabric bag
3
Laser class
2M
Working range
30 m
Accuracy
± 0.3 mm/m
Manual
IP55
Power supply
3 x 1.5 V LR6 (AA)
30 h
Length
250 mm
Width
140 mm
Height
55 mm
Weight
0.5 kg
Line lasers | 29
Self-levelling line laser
3
Additional features
High precision and extensive working range for outdoor applications
LL20
Applications
Bricklaying, screeding, transferring
heights
Excavation work
Formwork
Installation
Scope of delivery
LL20
LD3 laser receiver with bracket (F 034 069 LN1)
3
Part number
F 034 063 0N8
6 x 1.5 V LR6 (AA)
3
Laser diode
635 nm
Hard carry case
3
Laser class
2
80 m
Accuracy
± 4°
IP55
Power supply
4 x 1.5 V LR6 (AA)
50 h
Tripod connection
5/8"
Length
141 mm
Width
53 mm
Height
188 mm
Weight
0.6 kg
Line lasers
Self-levelling: horizontal
Easy to operate thanks to compact design and one-button control
Robust design for tough jobsite conditions
30 | Line lasers
Line laser receiver
3
Line lasers: Line laser receiver
Seven-channel height display indicates the position of the LLD20 in relation
to the plane of the laser beam
Electronic filter protects against direct sunlight and electromagnetic radiation
Additional features
Dual-sided LCD display with full function overview and graphical display:
power on/off indicator, battery charge monitoring, accuracy setting, speaker
volume
Rubber reinforcement to protect against impact, and splashproof seal
Applications
Can be used with line lasers with a pulse function
LLD20
Scope of delivery
LLD20
Bracket
3
Part number
F 034 069 700
1 x 9 V 6LR61 Block
3
Range
30 m
Fabric bag
3
Power supply
1 x 9 V 6LR61 Block
IP55
Accuracy
± 1.3/± 2.5 mm
Length
25 mm
Width
76 mm
Height
169 mm
Weight
0.3 kg
Professional line laser receiver
Seven-channel height display indicates the position of the XLD2 in relation to
the plane of the laser beam
Direction memory (displays the side on which the laser signal has left the laser
reception range)
Electronic filter protects against direct sunlight and electromagnetic radiation
Additional features
Concise keypad with on and off button
Rubber reinforcement to protect against impact
Applications
Can be used with line lasers with a pulse function
XLD2
Scope of delivery
1
XLD2
Bracket (F 034 092 BN8)1
3
Part number
F 034 069 BN1
2 x 1.5 V LR6 (AA)
3
Range
55 m
Power supply
2 x 1.5 V LR6 (AA)
IP57
Accuracy
± 1.3/± 2.5 mm
Length
25 mm
Width
76 mm
Height
152 mm
Weight
0.3 kg
Line lasers | 31
Line laser receiver
3
Applications
Can be used with line lasers1
LD3
Scope of delivery
1
LD3
RB1 bracket
3
Part number
F 034 069 LN1
2 x 1.5 V LR6 (AA)
3
Range
80 m
Power supply
2 x 1.5 V LR6 (AA)
IP55
± 3 mm
Length
169 mm
Width
76 mm
Height
25 mm
Weight
0.2 kg
Accessories for line lasers
B-Mount
Batter board mount.
Suitable for
XLP34
Part number
F 034 092 4N0
Line lasers: Accessories and laser receiver
Easily attached to a staff using the bracket
Clear display showing all necessary information
Point lasers
Point lasers | 33
Self-levelling 3-beam point laser with magnetic universal mount
4
High accuracy with clearly visible laser points
Easy to handle due to compact size
Point lasers
Applications
Aligning 90° angles
Point transfer
Levelling work
MP3
Scope of delivery
MP3
Universal mount with 1/4" and 5/8" connection
3
Part number
F 034 066 0N0
Target
3
Laser diode
650 nm
Strap
3
Laser class
2M
3 x 1.5 V LR6 (AA)
3
Working range
30 m
Fabric bag
3
Accuracy
± 0.2 mm/m
IP54
Power supply
3 x 1.5 V LR6 (AA)
40 h
Tripod connection
1/4"
Length
107 mm
Width
64 mm
Height
115 mm
Weight
0.5 kg
Self-levelling 5-beam point laser with magnetic universal mount
High accuracy with clearly visible laser points
Rubber reinforcement to protect against impact, and splashproof seal
Easy to handle due to compact size
Applications
Ideal for plumb and levelling work at a right angle
Point transfer
Levelling work
XP5
Scope of delivery
XP5
Universal mount with 1/4" and 5/8" connection
3
Part number
F 034 066 500
Target
3
Laser diode
635 nm
Strap
3
Laser class
2M
3 x 1.5 V LR6 (AA)
3
Working range
30 m
Fabric bag
3
Accuracy
± 0.3 mm/m
Hard carry case
3
IP54
Power supply
3 x 1.5 V LR6 (AA)
24 h
Tripod connection
1/4"
Length
98 mm
Width
68 mm
Height
104 mm
Weight
0.4 kg
Total stations
Total stations | 35
with superior optics
Accuracy of 2 arc seconds (CST302R) or 5 arc seconds (CST305R)
Pre-installed, high-performance software
Large, dual-sided display
Additional features
Internal memory of 15,000 points
Working range up to 300 m without a prism and up to 5,000 m with a triple
prism
Data upload and data transfer through RS-232, USB port or SD card
Menu languages: English, German, French, Spanish, Portuguese, Russian
Dual-axis compensation
Encryption function
CST302R/305R
Applications
Exact measurement of distances
and angles
Horizontal stake out for excavation,
formwork and fixing points on the
floor and ceiling
Vertical stake out of fixing points on
façades and walls
Scope of delivery
1
2
Control line transfer onto multiple
storeys and perpendicular point
transfer
Checking and aligning prefab components and shuttering panels
CST302R/305R
Software
3
Part number
F 034 053 2N0, F 034 053 3N0
Tool kit
3
Magnification
30 x
Rain cover
3
Resolving power
4.0"
Plumb bob
3
Field of view
1°30´
2 x batteries (NiMH)
3
Minimum focus
1.3 m
3
Distance measurement with 1 prism
Up to 3,000 m
Cable (1 608 M00 3N1)
3
Angular accuracy
2˝1, 5˝2
Hard carry case
3
IP55
Working range
300 m without a prism
5 km with triple prism
Internal memory
15,000 points
Tripod connection
5/8"-11
Weight
9.1 kg (with hard carry case)
with CST302R
with CST305R
5
Total stations
User-friendly, powerful electronic total station
36 | Total stations
Total stations: Accessories
5
56-CHCTS
Charger for electronic total station.
Suitable for
CST302R, CST305R
Part number
1 608 M00 2N4
56-NMH300
Battery pack for electronic total station.
Suitable for
CST302R, CST305R
Part number
1 608 M00 1NJ
56-CST9PIN
Data transfer cable for electronic total station.
Suitable for
CST302R, CST305R
Part number
1 608 M00 3N1
63-1010-O, 63-1010-Y
Prism with all metal holder and target plate.
0/-30 mm offset. Precision ground to an accuracy of 2.5 arc seconds
(62.5 mm). Optima series. Fully compatible with leading manufacturers. Locking screw for tilt setting. Bayonet adapter with 5/8"-11 inner
thread. All metal holder and target plate.
Suitable for
CST302R, CST305R
Part number
63-1010-O (Orange)
F 034 055 2NG
63-1010-Y (Yellow)
F 034 055 2N5
63-1010V-O
Prism with all metal holder and target plate (orange) – Value Line.
0/-30 mm offset. Precision ground to an accuracy of < 5 arc seconds
(62.5 mm). Optima series. Fully compatible with leading manufacturers. Locking screw for tilt setting. Bayonet adapter with 5/8"-11 inner
thread. All metal holder and target plate.
Suitable for
CST302R, CST305R
Part number
63-1010V-O (Orange)
63-1012-O, 63-1012-Y
All metal holder and target plate.
Suitable for
Prism 63-2011-O, 63-2011-Y
Part number
63-1012-O (Orange)
F 034 055 2NL
63-1012-Y (Yellow)
F 034 055 2NJ
F 034 055 2NE
63-2010M-O,
63-2010M-Y
Prism with plastic target plate.
(62.5 mm). Durable and robust aluminium holder. Fully compatible
with leading manufacturers. Holder with tilt of up to 350°. Bayonet
adapter with 5/8"-11 inner thread.
Suitable for
CST302R, CST305R
Part number
63-2010M-O (Orange)
F 034 055 1N8
63-2010M-Y (Yellow)
F 034 055 1N6
63-2012M-O
Holder and target plate*.
Durable and robust aluminium holder. Plastic target plate. Fully compatible with leading manufacturers. Holder with tilt of up to 350°.
Bayonet adapter with 5/8"-11 inner thread.
Suitable for
Prism 63-2011-O, 63-2011-Y
Part number
63-2012M-O (Orange)
* Supplied without prism
F 034 055 3N6
Total stations | 37
63-2011-O, 63-2011-Y
Prism.
(62.5 mm). Fully compatible with leading manufacturers.
Suitable for
63-1012-O, 63-1012-Y, 63-2012M-O
Part number
63-2011-O (Orange)
F 034 055 1NG
63-2011-Y (Yellow)
F 034 055 1NE
63-2011V-O
Prism in canister (orange) – Value Line.
0/-30 mm offset. Precision ground to an accuracy of < 5 arc seconds
(62.5 mm). Fully compatible with leading manufacturers.
Suitable for
63-1012-O, 63-1012-Y, 63-2012M-O
Part number
63-2011V-O (Orange)
63-2600-O
Triple prism with all metal holder and target plate.
(62.5 mm). Three hermetically sealed prisms. Bayonet adapter with
5/8"-11 inner thread.
Suitable for
CST302R, CST305R
Part number
63-2600-O
63-3023
Prism with all metal holder and target plate.
-34 mm offset. Leica® type H.I. and push-button mounting.
High-precision, copper-coated prism. Snap-in prisms are compatible
with Leica®/Wild type holders and prisms. GPH1 prism and holder
(centrally symmetrical point in the standing axis of the prism carrier).
Suitable for
CST302R, CST305R
Part number
63-3023
63-3022
Prism with holder.
-34 mm offset. Precision ground to an accuracy of 2.5 arc seconds
(62.5 mm). GPH1-compatible with snap-in lock. Made of high-strength
plastic, copper-coated. Centrally symmetrical point in the standing axis
of the prism carrier (visible prism centre).
Suitable for
CST302R, CST305R
Part number
63-3022
63-3024
Prism.
-34 mm offset. Precision ground to an accuracy of 2.5 arc seconds
(62.5 mm). GPH1-compatible with snap-in lock. Made of high-strength
plastic, copper-coated. Centrally symmetrical point in the standing axis
of the prism carrier (visible prism centre).
Suitable for
CST302R, CST305R
Part number
63-3024
63-3025
Prism holder.
Made of high-strength plastic.
Suitable for
Prism 63-3024
Part number
63-3025
63-4000
Reflector system.
-34 mm offset. Ideal for working at short distances (up to 200 m), e.g.
convergence measurements in tunnel construction. Compatible with
Wild type plug-in stud.
Suitable for
CST302R, CST305R
Part number
63-4000
F 034 055 1NS
F 034 055 5N1
F 034 055 4NA
F 034 055 4N9
F 034 055 4NB
F 034 055 4NC
F 034 005 5N0
5
38 | Total stations
5
65-1500M
Universal mini prism with metal holder and accessories.
0/-30 mm offset. Diameter of 25.4 mm, sealed. 5/8"-11 thread.
Precision ground to an accuracy of 2 arc seconds. Side-mounted
circular vial.
Suitable for
CST302R, CST305R
Part number
65-1500M-C (Chartreuse)
F 034 055 6N4
65-1500M-R (Red)
F 034 055 6N5
65-1700-R
Mini prism stake out pole system.
Precise 25.4-mm mini prism with 0/-30 mm offset. M6 thread connection at top and bottom. Precision prism pole. Supplied with fabric bag,
2 points and four 30-cm extensions (2 x silver and 2 x red anodised)
for adapting to different conditions.
Tilting axis height with point = 100 mm.
Suitable for
CST302R, CST305R
Part number
65-1700-R
65-3500M
Mini prism with all metal holder and target plate.
With fabric bag and batter board point. -34 mm offset. Side-mounted
circular vial.
Suitable for
CST302R, CST305R
Part number
65-3500M
F 034 055 BN3
F 034 055 CN1
Theodolites
40 | Theodolites
Powerful digital theodolite
6
Theodolites
Accuracy of 2 arc seconds (DGT2) or 5 arc seconds (DGT10)
Easy and precise angle measurement
Large, dual-sided display with lighting
Additional features
Comprehensive range of accessories
Robust / IP54
DGT10, DGT2
Applications
Suitable for all angle measurements
on the construction site
Transferring batter board axes
Staking out angles and gradients
Checking and aligning prefab components and formwork
Vertical transfer of control lines
Scope of delivery
1
2
DGT10, DGT2
Sunshade
3
Part number
F 034 054 3N0, F 034 054 3N1
Rain cover
3
Angular accuracy
5˝1, 2˝2
Tool kit
3
Magnification
30 x
Drying cloth
3
Resolving power
2.5"
Plumb bob
3
Field of view
1°30´
Batteries
3
Minimum focus
1.3 m
Hard carry case
3
Circle graduations
360°/400 gons
Tripod connection
5/8"-11
IP54
Weight
4.5 kg
with DGT10
with DGT2
Accessories for theodolites
DTEP
Diagonal eyepiece.
Suitable for
DGT10, DGT2
Part number
1 608 M00 7N4
Optical levels
42 | Optical levels
Optical level with 22 x or 26 x magnification
7
Optical levels
Sturdy metal housing with rubber reinforcement
Fast aperture
Magnetically dampened compensator
Additional features
Circular vial with penta prism
Fine motion knobs on both sides with friction-braked rotation, endless
horizontal drive
Large focussing knob
Target collimator
Graduated circle with either 360 degrees or 400 gons
Compensator lock (transport lock)
PAL series
Applications
Patios
Landscaping
General construction
Foundations
Road construction
Excavation
Scope of delivery
1
2
3
4
PAL22D, PAL22G
Lens cover
3
Part number
F 034 068 7N4, F 034 068 7N7
Plumb bob
3
Unit of measure
Degrees1, gons2
Allen wrench
3
Magnification
22 x
Adjusting pin
3
Working range
76 m
Hard carry case (1 608 M00 05S)
3
Levelling accuracy
0.1 mm/m
Angular accuracy
1°1, 1 gon2
Compensator setting accuracy
± 0.8"
Clear objective aperture
36 mm
Length
220 mm
Width
70 mm
Height
150 mm
Weight
1.9 kg
PAL26D, PAL26G
Part number
F 034 068 8NE, F 034 068 8NH
Unit of measure
Degrees3, gons4
Magnification
26 x
Working range
99 m
Levelling accuracy
0.05 mm/m
Angular accuracy
1°3, 1 gon4
± 0.5"
40 mm
Length
220 mm
Width
70 mm
Height
150 mm
Weight
1.9 kg
only
only
only
only
with
with
with
with
PAL22D
PAL22G
PAL26D
PAL26G
Optical levels | 43
7
Additional features
Fine motion knobs on both sides with friction-braked rotation,
endless h
orizontal drive
Target collimator
SAL20N and SAL24N
Applications
Patios
Landscaping
Foundations
Road construction
Excavation
Scope of delivery
1
2
3
4
SAL20ND, SAL20NG
F 034 068 1N7, F 034 068 1N8
Lens cover
3
Part number
Plumb bob
3
Unit of measure
Degrees1, gons2
Allen wrench
3
Magnification
20 x
Adjusting pin
3
Working range
Up to 61 m
3
Levelling accuracy
0.1 mm/m
Angular accuracy
1°1, 1 gon2
± 0.8"
36 mm
Length
220 mm
Width
70 mm
Height
150 mm
Weight
1.9 kg
SAL24ND, SAL24NG
Part number
F 034 068 400, F 034 068 401
only
only
only
only
with
with
with
with
SAL20ND
SAL20NG
SAL24ND
SAL24NG
Unit of measure
Degrees3, gons4
Magnification
24 x
Working range
Up to 91 m
Levelling accuracy
0.05 mm/m
Angular accuracy
1°3, 1 gon4
± 0.8"
36 mm
Length
220 mm
Width
70 mm
Height
150 mm
Weight
1.9 kg
Optical levels
Fast aperture
44 | Optical levels
7
Optical levels
Fast aperture
Additional features
Fine motion knobs on both sides with friction-braked rotation, endless
horizontal drive
Target collimator
SAL28N and SAL32N
Applications
Patios
Landscaping
Foundations
Road construction
Excavation
Scope of delivery
1
2
3
4
SAL28ND, SAL28NG
Lens cover
3
Part number
F 034 068 A17, F 034 068 A19
Plumb bob
3
Unit of measure
Degrees1, gons2
Allen wrench
3
Magnification
28 x
Adjusting pin
3
Working range
Up to 107 m
3
Levelling accuracy
0.05 mm/m
Angular accuracy
1°1, 1 gon2
± 0.5"
40 mm
Length
220 mm
Width
70 mm
Height
150 mm
Weight
1.9 kg
SAL32ND, SAL32NG
Part number
F 034 068 200, F 034 068 201
Unit of measure
Degrees3, gons4
Magnification
32 x
Working range
Up to 122 m
Levelling accuracy
0.05 mm/m
Angular accuracy
1°3, 1 gon4
± 0.3"
40 mm
Length
220 mm
Width
70 mm
Height
150 mm
Weight
1.9 kg
only
only
only
only
with
with
with
with
SAL28ND
SAL28NG
SAL32ND
SAL32NG
Laser rangefinders
46 | Laser rangefinders
The robust solution for precise short distance measurement
3
8
Laser rangefinders
Rubber reinforcement ensures robustness and durability
Jobsite tested: dust and splash protected (IP54),
shockproof when dropped from a height of up to 1 m
Large, automatically illuminated, easy to read three line display
Additional features
User-friendly buttons for exceptionally good handling
RF5
Scope of delivery
RF5
2 x 1.5 V LR03 (AAA)
3
Part number
F 034 072 0N2
Hand strap
3
Measuring range
0.05 – 50 m
Protective case
3
Measuring accuracy, typ.
± 1.5 mm
Manufacturer’s certificate
3
Battery lifetime, individual measurements
Approx. 10,000
Battery lifetime, continuous measurement
Approx. 2.5 h
Shock protection
Up to 1 m
IP54
Length
114 mm
Width
53 mm
Height
31 mm
Weight
0.14 kg
The robust solution for long outdoor distances
Typ. measuring accuracy of ± 1 mm and measuring range of up to 250 m
Integrated viewfinder for measuring in bright sunlight
Glass lens and ceramic optics carrier for high precision and robustness
Additional features
Outstanding functionality: ten functions for faster and more precise work
Easy operation thanks to clear keypad and display symbols
Fold-out measuring pin for precise measurements in all situations
Large, easy to read, illuminated four line display
RF25
Scope of delivery
RF25
4 x 1.5 V LR03 (AAA)
3
Part number
F 034 072 3N0
Hand strap
3
Measuring range
0.05 – 250 m
Protective case
3
Measuring accuracy, typ.
± 1.0 mm
Manufacturer’s certificate
3
Battery lifetime, individual measurements
Approx. 30,000
Battery lifetime, continuous measurement
Approx. 5 h
Shock protection
Up to 1 m
IP54
Length
120 mm
Width
66 mm
Height
37 mm
Weight
0.24 kg
Measuring wheels
48 | Measuring wheels
All-purpose measuring wheel for the most demanding jobsite
9
conditions in construction and utilities
Measuring wheels
High stability and long life
6-digit counter, easy-to-read and impact-resistant
Easy pushbutton reset
Applications
Construction
Utilities
Land surveying
32-401M
32-401M
Part number
F 034 074 5N3
Wheel diameter (circumference)
31.83 cm (1 m)
Max. measured value
9999.99 m
Wheel stand
3
Wheel brake
3
Handle
Folding
Material
Steel
All-purpose measuring wheel for the most demanding jobsite
conditions in land surveying
Sturdy disc wheel for use in terrain
6-digit counter, easy-to-read and impact-resistant
Applications
Land surveying
Construction
Utilities
32-416M
32-416M
Part number
F 034 074 9NG
31.83 cm (1 m)
Max. measured value
9999.99 m
Wheel stand
3
Wheel brake
3
Handle
Folding
Material
Steel
Measuring wheels | 49
Lightweight, handy measuring wheel
9
Measuring wheels
Ergonomic pistol grip
Individually height-adjustable
Applications
Construction
Utilities
Land surveying
RT312M
RT312M
Part number
F 034 074 R01
31.83 cm (1 m)
Max. measured value
9999.99 m
Wheel stand
3
Handle
Telescopic grip
Material
Aluminium
Digital measuring wheel with integrated display and memory
Illuminated display makes it easy to read the values
Pause function for interruptions and combined measurements
Quickly save and recall up to four measured values
Applications
Construction
Utilities
Land surveying
RT412D
RT412D
Part number
F 034 074 R02
31.83 cm (1 m)
Max. measured value
9999.99 m
Wheel stand
3
Power supply
2 x 1.5 V LR03 (AAA)
Handle
Telescopic grip
Material
Aluminium
Magnetic locators
Magnetic locators | 51
Very sturdy, waterproof magnetic and valve rod locator
10
Additional features
Waterproof up to the housing; housing splashproof
Sturdy and lightweight aluminium tube with durable hard rubber tip
Applications
For locating ferromagnetic objects outdoors
For locating objects concealed by earth, road surface, snow and water, e.g.
hydrants, marker magnets, manhole covers, valve rods, surveying marks and
rods, water meters, etc.
Magna-Trak 100
Scope of delivery
Magna-Trak 100
Magna-Trak 100
3
Part number
F 034 082 1N0
Batteries
3
Length
102 cm
Fabric bag
3
Locating depth (depending on size of object)
4.6 m
Power supply
6 x 1.5 V LR6 (AA)
100 h
Weight
1.3 kg
Erase function for suppressing unwanted influences from other magnetic parts
Visual and audible output of measurement results
Adjustable sensitivity and volume
Additional features
Very lightweight and ergonomic
Indication of power cables
Applications
Magna-Trak 102
Scope of delivery
1
2
Magna-Trak 102
Magna-Trak 102
3
Part number
F 034 082 3N0, F 034 082 3N5
Batteries
3
Length
102 cm
Fabric bag
31
4.6 m
Hard carry case
32
Power supply
6 x 1.5 V LR6 (AA)
100 h
Weight
1.3 kg
only with F 034 082 3N0
Magnetic locators
52 | Magnetic locators
10
Magnetic locators
New design, easy operation, larger display
Additional features
Applications
Magna-Trak 200
Scope of delivery
Magna-Trak 200
Magna-Trak 200
3
Part number
F 034 082 4N0
Batteries
3
Length
109 cm
Fabric bag
3
4.6 m
Power supply
6 x 1.5 V LR6 (AA)
100 h
Weight
1.3 kg
Erase function for suppressing unwanted influences from other magnetic parts
Additional features
Applications
Magna-Trak 202
Scope of delivery
1
2
Magna-Trak 202
Magna-Trak 202
3
Part number
F 034 082 5N0, F 034 082 5N1
Batteries
3
Length
109 cm
Fabric bag
31
4.6 m
Hard carry case
32
Power supply
6 x 1.5 V LR6 (AA)
100 h
Weight
1.3 kg
Tripods
54 | Tripods
Tripod
11
Tripods
Light weight aluminium tripod with quick-release clamp
Very sturdy and robust
Joints and shoe points made of metal
Additional features
Lightweight, durable, thick aluminium
Supplied with shoulder strap
ALQCI20-B
ALQCI20-B
Part number
F 034 091 000
Work height
97 – 160 cm
Max. work height
160 cm
Transport size
97 cm
Weight
4.1 kg
Tripod thread
5/8"
Dome head tripod
Dome head enables fast adjustment
Light weight, sturdy aluminium tripod with quick-release clamp
Additional features
ALQCI40-B
ALQCI40-B
Part number
F 034 091 70C
Work height
97 – 160 cm
Max. work height
160 cm
Transport size
97 cm
Weight
4.1 kg
Tripod thread
5/8"
Tripods | 55
Tripod
11
Tripods
Medium weight aluminium tripod with quick-release clamp
Additional features
ALQRI20-B
ALQRI20-B
Part number
F 034 091 300
Work height
107 – 165 cm
Max. work height
165 cm
Transport size
107 cm
Weight
5.5 kg
Tripod thread
5/8"
Elevator tripod
Additional features
ALQRI10-ELAZ
ALQRI10-ELAZ
Part number
F 034 091 1N1
Work height
84 – 139 cm
Max. work height
139 cm
Transport size
84 cm
Weight
4.9 kg
Tripod thread
5/8"
56 | Tripods
Elevator tripod
11
Tripods
Additional features
ALQRI20-ELAZ
ALQRI20-ELAZ
Part number
F 034 091 100
Work height
122 – 295 cm
Max. work height
295 cm
Transport size
122 cm
Weight
7.2 kg
Tripod thread
5/8"
Telescopic tripod
Light weight tripod with quick-release clamp
Additional features
ALELT20
ALELT20
Part number
F 034 091 GN0
Work height
105 – 183 cm
Max. work height
183 cm
Transport size
105 cm
Weight
5.5 kg
Tripod thread
5/8"
Tripods | 57
Heavy-duty elevator tripod
11
Tripods
Work height of 4.60 m
Crank for fine adjustment
Solid joints and shoe points made of metal
Additional features
Very robust construction
MCTE-ELAZ20
MCTE-ELAZ20
Part number
F 034 091 K05
Work height
213 – 460 cm
Max. work height
460 cm
Transport size
213 cm
Weight
19 kg
Tripod thread
5/8"
Heavy weight fibreglass tripod with quick-release clamp
Extra stability due to double banded legs
Additional features
No shrinking or swelling in changing weather and temperature conditions
FGHD20
FGHD20
Part number
F 034 091 PN2
Work height
107 – 183 cm
Max. work height
183 cm
Transport size
107 cm
Weight
7.2 kg
Tripod thread
5/8"
58 | Tripods
Heavy weight wooden tripod with screw clamp
11
Tripods
Extra stability due to double banded, extendible legs
Additional features
No shrinking or swelling in changing weather and temperature conditions
WDW20HV-ON
WDW20HV-ON
Part number
F 034 091 V09
Work height
100 – 183 cm
Max. work height
183 cm
Transport size
100 cm
Weight
7.2 kg
Tripod thread
5/8"
Laser pole platform system for fast levelling and alignment
from the floor to the ceiling
Telescopic pole with 3 sections enables easy adjustment to suit any room
height
Magnetic mount with horizontal and vertical fine adjustment
Design enables use in the smallest corners and spaces
Additional features
Mount with quick-release clamp
Padded base and ceiling plates
LP12-UM
Scope of delivery
Fabric bag
3
LP12-UM
Part number
F 034 093 000
Work height
100 – 360 cm
Max. work height
360 cm
Weight
2 kg
Tripods | 59
Mini tripod
58-MINIT
Mini tripod with magnet.
Suitable for
ILMXT, ILMXTG, ILMXL, GIZLT-3, MP3, XP5, XLP34
Part number
F 034 091 LN3
60-BAG20
Fabric bag for tripods.
Up to a length of 114 cm.
Suitable for
Tripods
Part number
1 608 M00 12V
60-TFG20
Folding tripod floor guide.
Aluminium, length of 70 cm.
Suitable for
Tripods
Part number
1 608 M00 AN2
Tripod accessories
Tripods: Mini tripod and accessories
11
Staffs and “cut & fill” rods
Staffs and “cut & fill” rods | 61
Telescopic staff (aluminium)
Additional features
Tight tolerances on extruded aluminium sections allow for smooth extension
Anodised sections are imprinted with weather-resistant and corrosion-
resistant inks
Includes snap-on circular vial (06-850)
06-804M, 06-805M, 06-805MII
06-804M
Part number
F 034 094 4N0
Unit of measure
Metric
Length
4m
Sections
4
Material
Aluminium
06-805M, 06-805MII
Part number
F 034 094 100, F 034 094 102
Unit of measure
Metric
Length
5m
Sections
5
Material
Aluminium
Telescopic staff (fibreglass)
Suitable for use in water
Corrosion-resistant, non-conductive fibreglass
Levelling scale on the front, measuring scale on the back
Additional features
Tight tolerances on extruded fibreglass sections allow for smooth extension
Anodised sections are imprinted with weather-resistant and corrosion-
resistant inks
06-907M
06-907M
Part number
F 034 094 EN4
Unit of measure
Metric
Length
7.6 m
Sections
6
Material
Fibreglass
Staffs
12
Light and durable aluminium alloy
Reliable and wear-resistant polycarbonate buttons lock the individual
sections
Levelling scale on the front, measuring scale on the back
62 | Staffs and “cut & fill” rods
“Cut & fill” rod
Staffs and “cut & fill” rods: “Cut & fill” rods and accessories
12
Height-adjustable, sturdy aluminium measuring rod with integrated circular
vial for aligning
Scale with a fixed zero point between the red and white areas (on the front)
Non-slip Quick-Lock™ mechanism
Additional features
Colour-coded rod
Red for “too high” – silver for “too low”
Spring-loaded bottom shoe for easy extension
Supplied with receiver mounting bracket
Applications
For use with lasers
Transferring and measuring heights and height differences
Ideal for setting up ceilings and floors
Measuring elevation profiles
06-TLMB
06-TLMB
Part number
F 034 094 301
Unit of measure
Metric
Length
2.4 m
Sections
2
Material
Aluminium
Accessories for staffs and “cut & fill” rods
06-TLMB-BAG
Fabric bag.
For “cut & fill” rod.
Suitable for
TLMB
Part number
1 608 M00 14L
06-820
Fabric bag.
Suitable for
Aluminium staffs
Part number
1 608 M00 2ND
06-850
Snap-on circular vial.
Suitable for
Aluminium staffs
Part number
F 034 009 2N3
Accessories
64 | Accessories
Accessories
13
Prism poles
67-4209TM
Prism pole.
Extendible, 135 to 250 cm, 2 sections, 5/8" connection, weight of
1.2 kg, metric and 1/10" graduations, with integrated circular vial.
Suitable for
Prisms
Part number
F 034 056 2N1
67-4508TMA,
67-4508TML
Extendible prism pole. Measuring height of 150 to 250 cm.
Two sections. Outer diameter: 32 mm at bottom, 25.4 mm at top.
Quick-LockTM with adjustable height. Weight of 1.6 kg, metric and
1/10" graduations, with integrated circular vial.
Suitable for
Prisms
Part number
67-4508TMA
F 034 056 6N2
5/8"-11
67-4508TML
F 034 056 6N4
Wild/Leica® type connection
67-4509TMA,
67-4509TML
Two sections. Outer diameter: 32 mm at bottom, 25.4 mm at top.
Suitable for
Prisms
Part number
67-4509TMA
F 034 056 6N7
5/8"-11
67-4509TML
F 034 056 6N8
67-4512TMA,
67-4512TML
Three sections. Outer diameter: 32 mm at bottom, 19.1 mm at top.
Quick-LockTM with adjustable height. Weight of 2 kg, metric graduations, with integrated circular vial.
Suitable for
Prisms
Part number
67-4512TMA
F 034 056 6NA
5/8"-11
67-4512TML
F 034 056 6NC
67-4515TMA,
67-4515TML
Three sections. Outer diameter: 38 mm at bottom, 19.1 mm at top.
Suitable for
Prisms
Part number
67-4515TMA
F 034 056 6NF
5/8"-11
67-4515TML
F 034 056 6NH
67-4708TMA,
67-4708TML
Extendible “Maxi Lite” prism pole.
Measuring height of 250 cm. Two sections. Weight of 0.95 kg, with
integrated circular vial.
Suitable for
Prisms
Part number
67-4708TMA
F 034 056 7N0
5/8"-11
67-4708TML
F 034 056 7N1
67-4712TMA,
67-4712TML
Measuring height of 360 cm. Three sections. Weight of 1.3 kg, with
Suitable for
Prisms
Part number
67-4712TMA
F 034 056 7N5
5/8"-11
67-4712TML
F 034 056 7N7
67-4715TMA,
67-4715TML
Measuring height of 460 cm. Four sections. Weight of 1.7 kg, with
Suitable for
Prisms
Part number
67-4715TMA
F 034 056 7NB
5/8"-11
67-4715TML
F 034 056 7ND
Accessories | 65
Accessories for poles
67-4250, 67-4250X
Tripod for prism poles with diameter of 25–38 mm.
Aluminium, weight of 2.9 kg.
Suitable for
Prism poles
Part number
67-4250
F 034 056 3N0
Quick-release clamp
67-4250X
F 034 056 3N3
Thumb-release clamp
67-4260, 67-4260X
Bipod for prism poles with diameter of 25–38 mm.
Aluminium, weight of 2.1 kg.
Suitable for
Prism poles
Part number
67-4260
F 034 056 3N4
Quick-release clamp
67-4260X
F 034 056 3N7
Thumb-release clamp
Adapters
61-2513
Prism adapter for Leica® type stud.
Plug-in stud inner thread 5/8"-11.
Suitable for
Leica® prisms
Part number
F 034 057 6N6
61-2521
Rotating tribrach adapter.
For mounting in Wild/Leica® system tribrachs. 5/8"-11 outer thread.
For mounting prism systems and adapters.
For adapting
to prisms from other manufacturers
Part number
F 034 057 6NC
61-2525
Zeiss type tribrach adapter with DIN plug-in stud.
For mounting in Wild/Leica® system tribrachs. Bore hole for DIN
plug-in stud (Zeiss system) for mounting Zeiss prisms. DIN plug-in
stud with 5/8" thread.
For adapting
to prisms from other manufacturers
Part number
F 034 057 6ND
61-3510GRN
Prism carrier with optical plummet and Leica® type mounting stud.
Sensitive, adjustable vial, precision ground to an accuracy of 2 arc
seconds. Rotating, green.
Suitable for
Tribrachs with Wild/Leica® system claw adapter
Part number
F 034 057 8N1
61-3520
Wild system prism carrier.
Without plummet. Fixed. With Leica® type mounting system.
Suitable for
Tribrachs with Wild/Leica® system claw adapter
Part number
F 034 057 8N7
61-4500BLK
Tribrach with optical plummet.
Black.
Suitable for
Theodolites and total stations
Part number
F 034 057 2N0
61-4635BLK
Tribrach with laser plummet.
Laser plummet < 2 mm at 2 m. Black.
Suitable for
Theodolites and total stations
Part number
F 034 057 4N1
Double right angle penta prism
66-911
Precise double right angle penta prism in a leather pouch.
Large centre lens with yellow filter, which permits foresight viewing.
Part number
F 034 055 DN3
Accessories
13
66 | | 67

Professional Measuring Technology

Transcription

Similar documents

www.cstberger.com