www.cstberger.com
Transcription
www.cstberger.com
www.cstberger.com ROTARY LASERS 57-ALHVD ALHV Package CST/berger Brands can be found anywhere construction, surveying, leveling, and layout work is being performed. We are customer driven and committed to providing quality laser products and superior service. CST/berger offers a comprehensive line of rotating laser tools. Hard Shell Carrying Case V-Mount for Drop Ceilings #57-VMOUNT ALGR Grade Control-Dual Dial-In Through Multi-Function LCD Display Set dual axis grade (±10%), Sweep “Chalkline”, Point-toPoint, and Spot modes allow you to adapt the ALGR Control Grade Through The MultiFunction LCD Model Laser Enhancement Glasses #57-GLASSES Magnetic Targets #57-TARGET Green Beam ALGR ALHV ALHV-G ALH w/Down Plumb Beam LM800DP LM800 LM800GR Horizontal Accuracy @ 100-ft 1/16-in (1.5mm) 1/16-in (1.5mm) 1/16-in (1.5mm) 1/16-in (1.5mm) 1/16-in (1.5mm) 1/16-in (1.5mm) 1/16-in (1.5mm) 0-1000 RPM Variable (3) Variable (3) 600 RPM Variable (3) Variable (3) 600 RPM Range Indoors 660-ft (200m) 660-ft (200m) 820-ft (250m) - 660-ft (200m) 660-ft (200m) - Range Exterior with Detector 2800-ft (850m) 2800-ft (850m) 1312-ft (400m) 2800-ft (850m) 2800-ft (850m) 2800-ft (850m) 2800-ft (850m) Leveling Type (Degrees) Electronic (±5º) Electronic (±5º) Electronic (±5º) Electronic (±5º) Electronic (±5º) Electronic (±5º) Electronic (±5º) 635nm 635nm 532nm 650nm 635nm 635nm 650nm Scanning w/ Spot Mode Vertical Self-Leveling @ 100-ft Yes Yes Yes - Yes Yes - 1/8-in (3.2mm) 1/8-in (3.2mm) 1/8-in (3.2mm) - 1/8-in (3.2mm) 1/8-in (3.2mm) - Laydown Beam Positioning No Yes Yes - Yes Yes - Slope/Grade Capability (±10%) Dual Dial-In Dual Dual Single Dual w/Remote Dual w/Remote Dual Battery Type 4-“D” Cell 4-“D” Cell NiMH 4-“D” Cell NiMH NiMH NiMH Water/Dust Protection IP67 IP67 IP67 IP67 IP54 IP54 IP54 Warranty 3 Year 3 Year 3 Year 3 Year 3 Years 3 Year 3 Year Available Packages: INTERIOR EXTERIOR INTERIOR EXTERIOR INTERIOR EXTERIOR EXTERIOR Complete Package Contents: 57-ALGRPKG Remote, LD440 Detector w/Clamp, Glasses, (2) Magnetic Targets, V-Mount, Tripod, 8-ft Rod, Batteries, Case 57-ALHVPKG Remote, LD440 Detector w/Clamp, Glasses, (2) Magnetic Targets, V-Mount, Tripod, 8-ft Rod, Batteries, Case Detector Package Contents: 57-ALGRD Remote, LD440 w/clamp, Batteries, Case 57-ALHVD Remote, LD440 Detector w/Clamp, Glasses, (2) Magnetic Targets, V-Mount, Batteries, Case 57-ALHVGD Remote, LD440G Detector w/Clamp, Glasses, Magnetic Target, V-Mount, NiMH Rechargeable Batteries, Case 57-ALHV Remote, Glasses, (2) Magnetic Targets, V-Mount, Batteries, Case 57-ALHVG Remote, Glasses, Magnetic Target, V-Mount, NiMH Rechargeable Batteries, Case Interior Package Contents: n/a n/a INTERIOR EXTERIOR INTERIOR EXTERIOR EXTERIOR 57-ALHPKG LD440 Detector w/Clamp, Tripod, 8-ft Rod, Batteries, Case n/a 57-LM800PKG Remote, LD400 Det. w/Clamp, Glasses, V-Mount, (2) Magnetic Targets, NiMH Bat. Pack/Charger, Tripod, 8-ft Rod, Case 57-LM800GRPKG LD400 Detector w/Clamp, NiMH Battery Pack and Charger, Tripod, 8-ft Rod, Case 57-ALH LD440 Detector w/Clamp, Batteries, Case 57-LM800DPDI LD-400 Detector a/Clamp, Remote, Glasses, (2) Magnetic Targets, V-Mount, NiMH Battery Pack and Charger, Case 57-LM800D Remote, LD400 Detector w/Clamp, NiMH Battery Pack and Charger, Case 57-LM800GR Remote, LD400 Detector w/Clamp, NiMH Battery Pack and Charger, Case 57-LM800DPI Remote, Glasses, (2) Magnetic Targets, VMount, NiMH Battery Pack and Charger, Case 57-LM800I Remote, Glasses, (2) Magnetic Targets, VMount, NiMH Battery Pack and Charger, Case n/a Other Package Contents: 57-LM800DI Same as #57-LM800I with LD400 detector All specifications are subject to change without notice. 2 Remote Rotation Rate (Preset Speeds) Beam Rating ROTARY LASERS LD440 Detector USA 1-800-435-1859 • www.cstberger.com • 1-815-432-9200 n/a 57-LM800GRPKG-3 Same as #57-LM800GRPKG 3-in-1 Tricase DETECTORS– ROTARY LASER Position beam automatically (90º vertical) over a reference point. Model Vertical Self-Leveling Vertical self-leveling allows interior rotary lasers to be positioned in laydown for vertical applications. LD500 LD440G LD440 LD400 LD120 LD100N LD90 1000-ft (305m) 1000-ft (305m) 500-ft (152m) Green Beam Range 600-ft (180m) 1400-ft (200m) 1400-ft (425m) 1400-ft (425m) Bandwidth (mm) 5/10/25 .75/1.5/3.0 .75/1.5/3.0 .75/1.5/3.0 1.5/3.0 1.5/3.0 1.5/3.0 LCD Display(s) 1-Side 2-Sides 2-Sides 2-Sides 2-Sides 1-Side - Visual LED’s Audible Yes Yes Yes - - - Yes, 2 Sides med/high med/high med/high med/high on/off on/off on/off 7 7 7 7 3 3 - 57-LD120 Rod Bracket 57-LD100N Rod Bracket 57-LD90 Rod Bracket Display Channels Strobe Shield Yes TM Contents: Yes 57-LD500 HD Rod Bracket, Pin, Case 57-LD440G HD Rod Bracket ROTARY LASER DETECTORS Lay-Down Beam Positioning Yes 57-LD440 HD Rod Bracket 57-LD400 HD Rod Bracket ACCESSORIES– ROTARY LASER LMH600 LMH-C AL-500HV AL-500H LM1000X LM30 3/32-in (2.4mm) 3/32-in (2.4mm) 1/8-in (3.0mm) 1/8-in (3mm) 1/8-in (3mm) 1/4-in (6mm) Variable (3) 600 RPM 0-1000 RPM 600 RPM Variable (4) Variable (2) 330-ft (100m) - 200-ft (60m) - 200-ft (60m) 200-ft (60m) 2000-ft (610m) 2000-ft (610m) 1000-ft (305m) 1000-ft (305m) 1000-ft (305m) 800-ft (240m) Electronic (±5º) Electronic (±3º) Electronic (±5º) Electronic (±5º) Electronic (±5º) Manual 635nm 650nm 635nm 650nm 635nm 635nm Yes - Yes - Yes Yes 1/8-in (3.2mm) - 1/8-in (3.2mm) - 1/8-in (3.2mm) 1/4-in (6.4mm) Yes - Yes - - - Dual Manual Single - - - 4-“D” Cell 4-“D” Cell 6-“AA” Cell 6-“AA” Cell NiMH 4-“C” Cell IP54 IP54 IP54 IP54 IP54 - 2 Year 2 Year 1 Year 1 Year 1 Year 1 Year INTERIOR EXTERIOR EXTERIOR INTERIOR EXTERIOR EXTERIOR 57-LMH600PKG Remote, Glasses, Magnetic Target, V-Mount, LD400 Detector w/Clamp, Batteries, Tripod, 8-ft Rod, Case 57-LMHCUPK LD400 Detector w/Clamp, Batteries, Tripod, 8-ft Rod, Case 57-LMH600D Remote, LD400 Detector w/Clamp, Batteries, Case 57-LMH-CU LD400 Detector w/Clamp, Batteries, Case 57-LMH600I Remote, Glasses, Magnetic Target, V-Mount, Batteries, Case 57-LMH600 Remote, Batteries, Case 57-LMHCUPK-3 Same as #57-LMHCUPK 3-in-1 Tricase INTERIOR EXTERIOR INTERIOR EXTERIOR 57-AL500HVPKG Remote, LD-90 Detector w/ Clamp, Glasses, Magnetic Target, Wall Mount, Batteries, Tripod, 8-ft Rod, Case 57-AL500HPKG LD-90 Detector w/ Clamp, Glasses, Magnetic Target, Wall Mount, Batteries, Tripod, 8-ft Rod, Case 57-LM1000XPKG Remote, Glasses, Magnetic Target, V-Mount, LD120 Det. w/Clamp, NiMH Battery Pack and Charger, Tripod, 8-ft Rod, Case 57-LM30PKG Glasses, Magnetic Target, Wiz-Mount, LD100N Detector w/Clamp, Batteries, Tripod, 8-ft Rod, Case 57-AL500HVDI Remote, LD-90 Detector w/ Clamp, Glasses, Magnetic Target, Wall Mount, Batteries, Case 57-AL500H LD-90 Detector w/ Clamp, Batteries, Case 57-LM1000XE LD120 Detector w/Clamp, NiMH Battery Pack and Charger, Tripod, 8-ft Rod, Case 57-LM30D LD100N Det. w/Clamp, Batteries, Case 57-LM30DUI Same as #57-LM30I plus LD400 Det. 57-AL500HVI Remote, Glasses, Magnetic Target, Wall Mount, Batteries, Case n/a 57-LM1000X Remote, Glasses, Magnetic Target, V-Mount, LD120 Detector w/Clamp, NiMH Battery Pack and Charger, Case 57-LM30I Remote, Target, Wiz-Mount, Batteries, Case 57-LM30 Batteries, Case n/a 57-LM30PKG-3 Same as #57-LM30PKG 3-in-1 Tricase USA 1-800-435-1859 • www.cstberger.com • 1-815-432-9200 Mounting Platform • Make many applications easy and more versatile with adjustable platform. • Aids in the installation of drop ceilings. Cat.# Decription 57-VMOUNT Mount-Tripod Vertical and Wall/Ceiling Laser Grade Adapter • Set up lasers at desired grade. • Vernier (±10 minutes). Circular level vial and standard 5/8-11 mounting. Cat.# Decription 58-LGA Laser Grade Adapter Target-Magnetic • Attach to metal studs or drop ceiling t-bars. • Inch/cm graduations. • Ideal for drop ceilings. Cat.# Decription 57-TARGET Target-Red Laser 57-TARGET-G Target-Green Laser Glasses–Laser • Improves visibility of laser beams under bright conditions or over distances. Cat.# Decription 57-GLASSES Glasses-Red Laser 57-GLASSSES-G Glasses-Green Laser 3 58-ILM-XTE ILM-XT Interior/Exterior Package LINE LAYOUT LASERS CST/berger offers a diverse range of line layout lasers for construction, squaring, alignment, leveling, and layout work. We are customer driven and develop products that fit your needs. Hard-Shell Case Mini-Laser Tripod Magnetic Mount Strap Heavy-Duty Rod Bracket LINE LAYOUT LASERS LLD-20 Line Detector Green Beam Model XLP-34 ILM-XTG ILM-XT ILM LM2 Diode 635nm 532nm 635nm 635nm 635nm Down Plumb Beam 650nm - - - - Accuracy Up To ± 1/8-in @ 100-ft (3m @30m) 3/32-in @ 30-ft (2.4mm @ 9m) 3/32-in @ 30-ft (2.5mm @ 9m) 1/4-in @ 30-ft (6mm @ 9m) 1/4-in @ 60-ft (6mm @ 18m) Range (Interior) 100-ft (30m) 100-ft (30m) 100-ft (30m) 32-ft (10m) 100-ft (30m) Range (Exterior w/Detector) 300-ft (92m) - 100-ft (30m) - - Electronic, ±5º Self-Leveling, ±5° Self-Leveling, ±5° Self-Leveling, ±4° Manual-Vials (Adj. Feet)) Leveling Type Laser Cross 3 1 1 1 1 Battery Type 3-“AA” 3- NiMH “AA” 3-“AA” 3-“AA” 3-“AA” Warranty 1 Year 1 Year 1 Year 1 Year 1 Year Available Packages: INTERIOR EXTERIOR Interior Package Contents: 58-XLP34 Magnetic Laser Tripod, 2-Magnetic Targets, Laser Glasses, Batteries, Case Exterior Package Contents: 58-XLP34PKG XLD-2 Detector, B-Mount, Magnetic Laser Tripod, 2-Magnetic Targets, Glasses, Batteries, Case 58-ILM-XTG Magnetic Laser Tripod, Rechargeable Batteries/Charger Pack, Case LINE LAYOUT LASER ACCESSORIES LP12-UM Laser Pole Platform System • 12-ft (3.7m), 3-section laser pole with platform • Level and align from the floor to the ceiling– quick and easy set-up • Magnetic platform with horizontal and vertical adj. knobs Cat. # Description 58-LP12-UM 12-ft Pole System 4 INTERIOR EXTERIOR INTERIOR 58-ILM-XT Magnetic Laser Tripod, 3-’AA’ Alkaline Batteries, Case INTERIOR INTERIOR 58-ILM Magnetic Laser Tripod, Target, Batteries, Case 58-LM2 2-Magnetic Targets, Batteries, Case 58-ILM-XTE Magnetic Laser Tripod, LLD-20 Detector, Batteries, Case XLD2 Laser Line Detector XTMT Mount Mounting Platform–ILMXT • Dual-sided LCD Display • Easy-to-see bright blue on-grade LED’s with Strobe Shield™ • Heavy-duty magnets for ceiling applications • Includes heavy-duty rod bracket, batteries • Designed for the ILM-XT for easy leveling and aligning–adjustment knobs • Clips to channel, hangs, build in magnets Cat. # Description Cat. # 58-XLD2 Laser Line Detector 58-XTMT Multi-Mount for ILM-XT LLD-20 Laser Line Detector • Aids in locating laser beam emitted by a “Pulsed” Indoor-Outdoor Line Laser • Includes heavyduty rod bracket, 9V battery Description Mini-Laser Tripod • Adjustable Mount with Quick Clamp for ILM-XT Cat. # Description Cat. # Description 58-LLD20 Electronic Line Detector 58-MINIT Mount for ILM-XT USA 1-800-435-1859 • www.cstberger.com • 1-815-432-9200 DOT LASERS Carrying Case CST/berger Dot Lasers are great tools to increase productivity when 90° squaring, aligning and transfering points, as well as levelling. Multi-Mount Strap Trivet Target XP5 MP5 MP3 Diode (# of Dots) 635nm (1) 635nm (5) 650nm (3) Accuracy Up to 1/8-in @ 50-ft (3mm @ 15m) 1/4-in @ 100-ft (6mm @ 30m) 1/4-in @ 100-ft (6mm @ 30m) Range (Interior) 100-ft (30m) 100-ft (30m) 100-ft (30m) Levelling Type Self-Levelling Self-Levelling Self-Levelling ±4° ±5º ±5° Battery Type 3-“AA” 3-“AA” 3-“AA” Warranty 1 Year 1 Year 1 Year 58-XP5 Multi-Mount, Trivet, Target, Strap, Batteries, Soft Case and Hard Case 58-MP5 Multi-Mount, Strap, Target, Trivet, Batteries, Case 58-MP3 Multi-Mount, Strap, Target, Trivet, Batteries, Case ™ Model DOT LASERS Levelling Range 58-MP5 MP5 Standard Package Track Alignment Platform–MP5 • Track Alignment Platform with adjustment screws for the MP5 • Use for down plumb alignment jobs (such as framing and drywall installation). Cat. # Description 58-TAP Track Alignment Platform for MP5 Available Packages: Standard Package Contents: PIPE LASER Electronic pipe laser is designed with strength, accuracy, and reliability to operate on the most demanding jobsite conditions. Model Diode (#) Multi-Function Remote with ±15% line control from center position. 635nm (5) Range 800-ft (240m) Grade Range -15%,~ +40% Cross Axis Leveling Auto Line Centering ±15% 59-RC20 59-LMPLCASE Yes Yes Battery Type NiMH Warranty 2 Year 59-TARGET Target Kit - Base, Small and Large Target Insert PIPE LASER LINE LASER ACCESSORIES ±20 arc sec. Line Range Remote with Dual Wave Technology (both IR and RF frequency) LMPL20 Accuracy ± Next day setups are quick and easy, pipelaser remembers previous day’s grade and line settings. Illuminated display makes information easy to read. Remote and PipeLaser matching keypad icons for visual recall and ease of use. Available Packages: Package Contents: 59-LMPL20 Remote, Target Set, NiMH Bat. Pack/ Charger, Alkaline Battery Pack, 12V Cord, Leg Set (3), Case 59-LEGSET 59-RC20 59-PLMHT 59-BLOWER USA 1-800-435-1859 • www.cstberger.com • 1-815-432-9200 5 OPTICAL INSTRUMENTS Construction Automatic Level Levels and Transit-Levels Berger has been building quality, reliability, and value into their instruments since 1871. 200B Model LEVELS AND TRANSIT LEVELS Speed-Series Magnification • Built-in sunshade with protected eyepiece • Large coated achromatic lens - with fixed cross hairs • Rubber eyepiece cap • 4ft. (1.2m) short focus 190B Speed-Series 140B • state of the art compensator for optimum range and accuracy • Fine motion knobs on left and right sides and endless horizontal drive • Sealed, dust-protected leveling screws 136 Speed-Series 135 Econo-Series Model Econo-Series Magnification 20X 20X 20X 20X 20X 1/4-in (6mm) 1/4-in (6mm) 1/4-in (6mm) 1/4-in (6mm) 1/4-in (6mm) Horizontal Angle 15’ 15’ 15’ n/a 15’ Angular Accuracy Vertical Angle 1° n/a n/a n/a n/a Working Range Working Range 200-ft (60m) 200-ft (60m) 200-ft (60m) 200-ft (60m) 200-ft (60m) Thread Tripod Base 5/8-11 5/8-11 5/8-11 5/8-11 Warranty 1 Year 1 Year 1 Year 1 Year Complete Package Contents: 54-200K Plumb Bob, Adjustment Tools, Case, Tripod, 8-ft Rod 54-190K Plumb Bob, Adjustment Tools, Case, Tripod, 8-ft Rod 54-140K Plumb Bob, Adjustment Tools, Case, Tripod, 8-ft Rod 54-136K Adjustment Tools, Case, Tripod, 8-ft Rod 54-135K Adjustment Tools, Case, Tripod, 8-ft Rod Standard Package Contents: 54-200B Plumb Bob, Adjustment Tools, Case 54-190B Plumb Bob, Adjustment Tools, Case 54-140B Plumb Bob, Adjustment Tools, Case n/a 54-135 Adjustment Tools, Case Leveling Accuracy @ 100-ft Leveling Accuracy (@ 100-ft) CAL 26 26X ±1/8-in (3mm) 1°/1gon 150-ft (45m) Comp Setting ±0.8” 5/8-11 Warranty 1 Year 1 Year Available Packages: Available Packages: Standard Package Contents: 55-CAL26 Lens Cover, Plumb Bob, Adjustment Tools, Case Automatic Levels Model Magnification Leveling Accuracy (@ 100-ft) AUTOMATIC LEVELS Angular Accuracy Working Range SAL32’N’ SAL28’N’ PAL 26X SAL24’N’ PAL 24X PAL 22X SAL20’N’ 32X 28X 26X 24X 24X 22X 20X 1/16-in (1.5mm) 1/16-in (1.5mm) 1/16-in (1.5mm) 1/16-in (1.5mm) 1/16-in (1.5mm) 1/8 in (3mm) 1/8 in (3mm) 1°/1gon 1°/1gon 1°/1gon 1°/1gon 1° 1°/1gon 1°/1gon 400-ft (120m) 350-ft (105m) 325-ft (100m) 300-ft (92m) 300-ft (92m) 250-ft (76m) 200-ft (60m) Comp Setting ±0.3” ±0.5” ±0.5” ±0.8” ±0.8” ±0.8” ±0.8” Warranty 5 Years 5 Years 5 Years 5 Years 5 Years 5 Years 5 Years Available Packages: Complete Kit Contents: 55-SLVP32N Lens Cover, Plumb Bob, Adjustment Tools, Case, Tripod, 8-ft Rod 55-SLVP28N Lens Cover, Plumb Bob, Adjustment Tools, Case, Tripod, 8-ft Rod 55-PLVP26N Lens Cover, Plumb Bob, Adjustment Tools, Case, Tripod, 8-ft Rod 55-SLVP24N Lens Cover, Plumb Bob, Adjustment Tools, Case, Tripod, 8-ft Rod 55-PLVP24D Lens Cover, Plumb Bob, Adjustment Tools, Case, Tripod, 8-ft Rod 55-PLVP22N Lens Cover, Plumb Bob, Adjustment Tools, Case, Tripod, 8-ft Rod 55-SLVP20N Lens Cover, Plumb Bob, Adjustment Tools, Case, Tripod, 8-ft Rod Standard Package Contents: 55-SAL32N Lens Cover, Plumb Bob, Adjustment Tools, Case 55-SAL28N Lens Cover, Plumb Bob, Adjustment Tools, Case 55-PAL26N Lens Cover, Plumb Bob, Adjustment Tools, Case 55-SAL24N Lens Cover, Plumb Bob, Adjustment Tools, Case 55-PAL24D Lens Cover, Plumb Bob, Adjustment Tools, Case 55-PAL22N Lens Cover, Plumb Bob, Adjustment Tools, Case 55-SAL20N Lens Cover, Plumb Bob, Adjustment Tools, Case 55-SLVP24N-3 Lens Cover, Plumb Bob, Adjustment Tools, 3-in-1 Tricase, Tripod, 8-ft Rod Other Package Contents: Automatic Level Tri-Case All-in-One Carrying Case 6 • Protects Instruments from Damage • Stores Instruments in One Place • Easy to Transport 55-TRCS Tri-Case All-in-one Carrying Case • Fits 8-ft Rod Carries Automatic Level, Tripod, Rod USA 1-800-435-1859 • www.cstberger.com • 1-815-432-9200 NOTE: When ordering autolevels, please add “D” for Degrees of “G” for “Gons”. PAL24X is only available in Degrees. ELECTRONIC TOTAL STATIONS AND THEODOLITES CST-302R Electronic Reflectorless Total Station ! NEW TOTAL STATIONS AND THEODOLITES Model CST-302R Total Station CST-305R Total Station CST-205 Total Station DGT-02 Theodolite DGT-10 Theodolite Magnification 30X 30X 30X 30X 30X Resolving Power 3.0” 3.0” 4.0” 3.5” 3.5” Field of View 4.3-ft 1°30’ 1°30’ 1°30’ 1°30’ 4.27-ft (1.3m) 4.27-ft (1.3m) 4.92-ft (1.5m) 4.27-ft (1.3m) 4.27-ft (1.3m) 9,840-ft (3,000m) 9,840-ft (3,000m) 5,249-ft (1,600m) n/a n/a Minimum Focus Distance Measurement Single Prism Angular Accuracy 2 Sec. 5 Sec. 5 Sec. 2 Sec. 5 Sec. Internal Memory Built-in SD Card, 10,000 Points Built-in SD Card, 10,000 Points 50,000 Points - - 5/8-11 5/8-11 5/8-11 5/8-11 5/8-11 Tripod Thread Available Packages: Standard Package Contents: 56-CST302R Battery Pack (2) Battery Charger, Plumb Bob, Set of Tools, Software and USB Cable 56-CST205 2 Ni-MH Rechargeable Batteries w/Charger, Software, RS232 Cable, Tool Kit, Plumb Bob, Case 56-CST305R Battery Pack (2) Battery Charger, Plumb Bob, Set of Tools, Carrying Case, Software and USB Cable Total Station Accessories Cat.# Description 61-4300 56-USB300 56-300R232 56-300UPDATE 56-CHCTS 56-CHCTSEU 56-CHCTSAU 56-CHCTSUK 56-NMH300 CST300 Tribrach, yellow only USB Cable, CST300R RS-232 Data Transfer Cable, CST300R RS-232 Update Cable, CST300R Battery Charger, NiMH for CST300R Battery Charger CST300R Euro Charger Battery Charger 300R Australian Charger Battery Charger CST300R UK Charger Battery, NiMH for CST300R Total Station Cat.# Description 56-NMHCTS 56-CHCTS 56-NMB225N Battery Pack - NiMH, for Total Station (CST200 Series) Battery Pack - NiMH, for CST225N Battery Pack - NiMH, for CST225N 56-DGT2 Batteries, Tool Kit, Plumb Bob, Case Data upload and data-transfer through RS-232 data port, USB and SD Card Cat.# Description 56-TSKIT Basic Total Station Starter Kit, Includes: 8-ft Maxi-Lite Prism Pole, Single Prism, Bipod, Prism Bag, Wood/Fiberglass Tripod 56-TSKIT-CS Basic Construction Staking Kit, Includes: 8-ft Maxi-lite Prism Pole, MiniPrism Pole System, Wood/Fiberglass Tripod 56-TSKIT-BS Basic Site Starter Kit, Includes: Tribrach-Optical Plummet, Tribrach Adapter, Universal Single Prism, Prism Bag, Wood/Fiberglass Tripod 56-TSKIT-BS 56-TSKIT-CS Abney & Hand Level Kits Cat.# Description 17-635 5-in (12.7cm) Hand Level Case (17-621) Length Degrees (10min) %Grade 5 1/4-in (13.3cm) 0° - 90° Yes 17-642 Topographic Abney 6 3/8-in (16.1cm) 0° - 60° Yes 17-643 K&E Type Topographic 7 3/8-in (18.7cm) 0° - 60° Yes 17-645 5X Abney with Stadia 8 5/8-in (21.9cm) 0° - 90° Yes 17-636 6-in (15.2cm) Hand Level Case (17-622) 17-637 7-in (17.8cm) Hand Level Case (17-623/-624/-631) 17-639 9-in (22.9cm) Hand Level Case (17-630) 17-638 Abney Level Case for 17-640/-641 17-621 Hand Levels Description HAND LEVELS 17-640 Abney Level Cat.# Large dual-sided graphic display & alphanumeric keyboard 56-TSKIT Abney Levels Description Easy-to-target collimator Total Station Accessory Kits HAND LEVELS Cat.# 56-DGT10 Batteries, Tool Kit, Plumb Bob, Case Superior Optics (30X magnification) 17-630 17-642 Length 17-640 17-620A Pocket Sighting Level- Aluminum 17-621 Locke Hand Level 5-in (12.7cm) 17-623 Hand Level 6-in (15.2cm) 17-624 Round Hand Level 6-in (15.2cm) 17-630 5X Magnifying Hand Level 8-in (20.3 cm), ext. 9-in (22.9cm) 17-631 2X Magnifying Hand Level 6-in (15.2cm), ext. 8-in (20.3cm) 17-632 K&E Type 2X Hand Level 6-in (15.2cm), ext. 7 1/2-in (19.1cm) 17-645 17-632 17-643 17-623 Eagle Eye Hand Level Cat.# 17-600EE 17-624 17-631 Description Length 17-632 1X Eagle Eye Hand Level, w/stadia 5-in (12.7cm), ext. 7-in (17.8cm) USA 1-800-435-1859 • www.cstberger.com • 1-815-432-9200 7 Quick Clamp Wing Screw Positive quick clamp locking clamps. Hand Hold CST’s traditional wing screw clamping tripods offer quick and secure clamping for budgetminded users. Heavy-Duty Tripods - Aluminum Contractor’s Tripods - Aluminum Lightweight, heavy gauge aluminum and the added stability of double banded legs put this extension leg tripod “head and shoulders” above other aluminum tripods. Extended Closed Net Wt Head Our popular Contractors’ Tripods offer a positive locking quick clamp or wing screw style clamp. The Price Is Right! Our aluminum tripod has value written all over it. This tripod is stronger and more rigid than comparable tripods. Quick-Clamp Fastener Cat. # Extended Closed Net Wt Head Fastener 60-ALQR20 65” (165cm) 42” (107cm) 12lb (5.5kg) FLAT 5/8-11 60-ALQC20 63” (160cm) 38” (97cm) 9lb (4.1kg) FLAT 5/8-11 60-ALQRI20 65” (165cm) 42” (107cm) 12lb (5.5kg) FLAT 60-ALQCI21 63” (160cm) 38” (97cm) 9lb (4.1kg) FLAT 60-ALQR25 1/2-20, 1/4-20 65” (165cm) 42” (107cm) 12lb (5.5kg) FLAT 3 1/2-8 60-ALQR40 65” (165cm) 42” (107cm) 12lb (5.5kg) DOME 5/8-11 60-ALQC25 63” (160cm) 38” (97cm) 9lb (4.1kg) FLAT 3 1/2-8 60-ALQRI40 65” (165cm) 42” (107cm) 12lb (5.5kg) DOME 5/8-11 60-ALQC40 5/8-11 Wing Screw Cat. # HEAVY DUTY TRIPODS Threaded Screw for Extra Stability Positive Locking Clamps Quick-Clamp Cat. # Easily carry tripod with hand hold in one leg of the CST Wood Tripods (WDW Tripods). Light Weight, Heavy Gauge Aluminum with Double Banded Legs 60-ALQR20 Tripod 63” (160cm) 38” (97cm) 9lb (4.1kg) DOME 5/8-11 60-ALQCI20 63” (160cm) 38” (97cm) 9lb (4.1kg) FLAT 5/8-11 60-ALQCI40 63” (160cm) 38” (97cm) 9lb (4.1kg) DOME 5/8-11 Wing Screw Extended Closed Net Wt Head Fastener 60-ALW10 49” (124cm) 25” (64cm) 9lb (4.1kg) FLAT 5/8-11 Extended Closed Net Wt Head Fastener 60-ALW20 65” (165cm) 42” (107cm) 13lb (5.5kg) FLAT 5/8-11 60-ALC20 63” (160cm) 38” (97cm) 9lb (4.1kg) FLAT 5/8-11 60-ALWI20 65” (165cm) 42” (107cm) 13lb (5.5kg) FLAT 5/8-11 60-ALC40 63” (160cm) 38” (97cm) 9lb (4.1kg) DOME 5/8-11 60-ALW25 65” (165cm) 42” (107cm) 13lb (5.5kg) FLAT 3 1/2-8 60-ALW30 97” (246cm) 59” (150cm) 14lb (5.5kg) FLAT Replaceable Shoe Point Cat. # 5/8-11 Extra-Strength Honeycomb Fiberglass Dowels Heavy-Duty Tripods Wood/Fiberglass Extra Large Extruded Aluminum Locking Clamps Wing Screw, Flat Head Quick-Clamp, Flat Head Cat.# Extended Closed Net Wt Fastener 60-WDF20 72” (183cm) 42” (107cm) 16lb (7.2kg) 5/8-11 60-WDF20X 72” (183cm) 42” (107cm) 16lb (7.2kg) 5/8-11 60-WDF25 72” (183cm) 3 1/2-8 60-FGHD20* 72” (183cm) 42” (107cm) 42” (107cm) Heavy-Duty Tripods - Wood 16lb (7.2kg) 16lb (7.2kg) 3X Larger Quick Release Lever 60-WDF20X Tripod 5/8-11 Cat.# Extended Closed Net Wt Fastener 60-WDW10HV 25” (64cm) 19” (48cm) 12lb (5.5kg) 5/8-11 60-WDW20HV 72” (183cm) 42” (107cm) 16lb (7.2kg) 5/8-11 60-WDWI20 72” (183cm) 42” (107cm) 16lb (7.2kg) 5/8-11 60-WDW30HV 97” (246cm) 59” (150cm) 21lb (9.5kg) 5/8-11 *All Fiberglass Pass Through Bolt Premium Grade North American Hardwood Strut Heavy-Duty Composite Shoe with Steel Point Heavy-Duty Elevator Tripods The adjustable column has a height adjustment range of 12” (305mm) and improved gear system for smooth continuous motion. Cat.# 60-ALW30ELAZ Type Aluminum 60-WDW30ELAZ Wood Extended Net Wt 128” (325cm) 68” (173cm) 21lb (9.5kg) Fastener 5/8-11 128” (325cm) 68” (173cm) 27lb (12.2kg) 5/8-11 60-WDW20ELAZ Wood 94” (239cm) 49” (124cm) 18lb (8.2kg) 5/8-11 60-WDF20ELAZ Wood/Fbgls 94” (239cm) 49” (124cm) 18lb (8.2kg) 5/8-11 60-ALW20ELAZ Aluminum 88” (224cm) 48” (122cm) 15lb (6.8kg) 5/8-11 60-ALW10ELAZ Aluminum 46” (117cm) 25” (64cm) 13lb (5.9kg) 5/8-11 60-IOFOOT Indoor/Outdoor Rubber Shoe. All-surface rubber feet with retractable sharp metal points. 8 Closed Contractor’s Elevator Tripods Cat.# Type Extended Closed Net Wt Fastener 60-ALELT20 Aluminum 72” (183cm) 72” (183cm) 12lb (5.5kg) 5/8-11 60-ALQRI20ELAZ Aluminum 88” (224cm) 48” (122cm) 16lb (7.2kg) 5/8-11 Elevator Columns 60-ALW20ELAZ Tripod 60-ELAZ30 Column USA 1-800-435-1859 • www.cstberger.com • 1-815-432-9200 Cat.# Fastener Adj. Height 60-ELAZ20 5⁄8-11 17” (43cm) 60-ELAZ25 3 1⁄2-8 17” (43cm) 60-ELAZ30 5⁄8-11 34” (86cm) 60-ELAZ35 3 1⁄2- 8 34” (86cm) CONTRACTOR’S TRIPODS TRIPODS TRIPOD ACCESSORIES Robotics Tripods Aluminum Cat.# Description Fastener 60-TFG20 Tripod Floor Guide 63” (160cm) 38” (97cm) - 5/8-11 60-BAG20 60-RT20WDF Composite 71”(180cm) 46” (117cm) - 5/8-11 Tripod Carrying Bag fits tripods up to 45” (114cm) in closed length. 60-RT20FG 71” (180cm) 46” (117cm) - 5/8-11 61-2512 Universal Plastic Tripod Cap, 5⁄8-11 thread Type Extended 60-RT20ALW Aluminum ROBOTICS/MACHINE CONTROL TRIPODS Composite/Wood Closed GPS Receiver Tripod 60-TFG20 Floor Guide Mast Height: 84” (213cm). Total Extension Height Open: 10’-5” (317cm) Cat.# 60-WDF20MST Extended Closed Net Wt Fastener 72” (183cm) 42” (107cm) 17lb (7.8kg) 5/8-11 60-RT20ALW Tripod Elevator column allows a height adjustment range of 17” (43cm) Cat.# Tripod Adapters Easily adapt a tripod to fit your instrument. Cat.# Machine Control Tripods Extended Closed Net Wt Fastener 60-MCT 135” (343cm) 72” (183cm) 29lb (13kg) 5/8-11 60-MCTE 171” (434cm) 84” (213cm) 34lb (15.4kg) 5/8-11 NOTE: All MCT Tripods include Heavy Duty Points as well as industrial grade casters for interior applications. 60-MCTE Tripod RODS TRIPOD ACCESSORIES Net Wt Cat.# Tripod Fastener Adapts to Instrument Size 61-2506 5/8-11 11/16-26 61-2507 1/2-20 11/16-26 61-2508 1/2-20 5/8-11 61-2509 5/8-11 1/2-20 61-2510 5/8-11 3 1/2-8 61-2510A 3 1/2-8 5/8-11 61-2516 1/4-20 1/4-20 61-2517 5/8-11 1/4-20 Telescoping Rods Cat.# Length UOM Type 06-805MC 16-ft/5m Metric “E” Ft/Inches/8ths Aluminum 06-805MT 16-ft/5m Metric “E” Ft/Inches/100ths Aluminum Section Cat.# Length UOM Type Section 5 06-716 16-ft Feet/10ths/100ths Fiberglass 4 5 06-716C 16-ft Feet/Inches/8ths Fiberglass 4 8-ft Feet/10ths/100ths Aluminum 3 06-816 16-ft Feet/10ths/100ths Aluminum 5 06-808C 8-ft Feet/Inches/8ths Aluminum 3 06-816C 16-ft Feet/Inches/8ths Aluminum 5 06-808M 2.5m Metric “E” Aluminum 3 06-905M 5m Metric “E” Fiberglass 5 06-913 13-ft Feet/10ths/100ths Fiberglass 4 06-905MMM 5m 1/2 cm/mm Fiberglass 5 06-913C 13-ft Feet/Inches/8ths Fiberglass 4 06-705M 5m Metric “E” Fiberglass 4 06-813 13-ft Feet/10ths/100ths Aluminum 4 06-805M 5m Metric “E” Aluminum 5 06-813C 13-ft Feet/Inches/8ths Aluminum 4 06-805MMM 5m 1/2 cm/mm Aluminum 5 06-904M 4m Metric “E” Fiberglass 4 06-925 25-ft Feet/10ths/100ths Fiberglass 6 06-9042MM 4m dm/cm/2mm Fiberglass 4 06-925C 25-ft Feet/Inches/8ths Fiberglass 6 06-804M 4m Metric/“E” Aluminum 4 06-725 25-ft Feet/10ths/100ths Fiberglass 6 06-8042MM 4m dm/cm/2mm Aluminum 4 06-725C 25-ft Feet/Inches/8ths Fiberglass 6 06-916 16-ft Feet/10ths/100ths Fiberglass 5 06-907M 7.6m Metric “E” Fiberglass 6 06-916C 16-ft Feet/Inches/8ths Fiberglass 5 06-707M 7.6m Metric “E” Fiberglass 6 RODS AND POLES 06-808A Laser Rods and Poles Bayonet and Quik-Lok Cat.# Length Unit of Measure 09-2082E 8-ft Feet/Inches/8ths 09-2082T 8-ft Feet/Inches/100ths “Cut and Fill” Rod Type Cat.# Section 2 3 Bayonet 2 09-2082M 2.5m Metric Bayonet 2 09-4154T 15-ft Feet/Inches/100ths Quik-Lok 4 09-4154E 15-ft Feet/Inches/100ths Quik-Lok 4 06-4154M 4.6m Metric Quik-Lok 4 Length UOM 2.4m Metric 2 06-TLC 8-ft Feet/Inches/8ths 2 06-TLMB 2.4m Metric 2 Bubble Vial 06-TLCB 8-ft Feet/Inches/100ths 2 Bubble Vial 06-TLM Bayonet Rod Quik-Lok Pole Section Extras “Cut and Fill” Rod USA 1-800-435-1859 • www.cstberger.com • 1-815-432-9200 9 PRISMS 0/-30mm Optima® Series Metal Triangular, 0/-30mm Triple Assembly • Fully compatible with leading manufacturers. • All metal holder and target warranted for life. • Tension adjusting brass knob. • Nickel plated brass 5/8-11 bayonet adapter • Aluminum holder, target and yoke. • Three hermetically sealed 2-1/2” (62.5mm) precise prisms. • Nickel plated brass 5/8-11 bayonet adapter. 63-1010 Cat.# Decription 63-1010* Single Tilt Assembly with Target Cat.# Decription 63-1012* Single Tilt Holder with Target Only 63-2600 Triple Tilt Prism Assembly with Target 63-1040* 30/40mm Prism Assembly with Target 63-2601 Triple Tilting Holder and Target Only 63-1040CC* 30/40mm Copper Coated Prism Assembly with Target 63-2600 *Specify color when ordering. If no color is specified, any color in stock will be shipped. Retro Prism, 73mm Diameter • Encased in a light and rugged Lexan container. • A red and white sighting pole is included with each assembly. • Aluminum holders are machined and electrostatically painted for long-lasting finish. Value Line Prism 0/-30mm Systems Cat.# Decription 63-1010V Prism-Optima® All-Metal 63-2010MV Prism-Universal, w/Metal Yoke 65-1500V Prism-Mini, “Original” Peanut PackTM 65-1500MV Prism-Mini, All-Metal Peanut Pack TM Optima® N2 Nitrogen Filled Triple Prism Assembly- Aluminum Mount 64-2010 Single Prism Assembly with Pole 64-2011 Retro Prism Only- Lexan Container 64-2011S Seconds Retro Prism in Lexan Can Prism-Mini, Stake Out Pole System • 25mm precise mini prism with 0/-30mm offset tilting aluminum prism and holder. • Precision machined sectional poles. • Padded carrying case w/ 2 points. 63-1010N Cat.# Decription 63-1010N Optima N2 Prism 63-2011N Optima® N2 Prism in canister ® Yellow/Black Decription 65-1700 Mini Prism Pole System • Designed for close-in stakeout jobs. • Dual 5/8-11 thread allow threading in of poles on each side. • Dual circular vials. • Aluminum yoke and Delrin washers for excellent wear and long-term performance. • Precision ground glass up to 2 arc seconds. • Fully compatible with leading manufacturers. • Single tilt holder tilts to 350º. • Nickel plated brass 5/8-11 bayonet adapter. TM Orange/White Cat.# Prism-Stake Out 0/-30mm Universal Polycarbonate Chartreuse/Blk Decription 64-2000 65-1700 PRISMS • Hermetically sealed and charged with nitrogen. • All metal holder and target warranted for life. • Fully compatible with leading manufacturers. • Tension adjusting brass knob. 64-2000 Cat.# Blk/Chartreuse Cat.# Decription 63-2010* Single Tilt Prism Assembly 63-2010M* Single Tilt Prism Assembly with Metal Yoke 63-2012M* Metal Yoke Single Tilt Mount Only 63-2012* Single Tilt Mount Only 63-3033 Universal 1.6cm x 11 Adapter 63-2010 Cat.# Decription 65-1600M Mini Prism System for Stakeout Jobs with Case and Point Chartreuse/Blk Prism-Right Angle • Permits stepping off angles of 90° and 180° with a center lens which permits foresight viewing. • Features a larger field of view, and larger foresight viewing glass. *-Specify color when ordering. If no color is specified, any color in stock will be shipped. Cat.# Decription 66-911 Precise Large Double Right Angle Prism w/ Leather Case Mini Prism, 0/-30mm Universal • 25.4mm diameter prism, sealed in black anodized aluminum can. • 5/8-11 mounting thread. • Precision prism ground up to 2 arc seconds. • On-board circular bubble vial. Cat.# Decription 65-1500* “Peanut Pack” Mini Prism Package 65-1500M* “Peanut Pack” All Metal Mini Prism Package 65-1505* Mini Tilt Target Assembly with Prism Only 65-1505M* All Metal Mini Tilt Target Assembly with Prism Only 65-1505S Seconds Mini Assembly with Prism 65-1505RL 65-1505RL NEW Reflectorless Mini Prism 65-1512 25.4mm Mini Prism in Can Only 65-1512S Seconds Mini Prism in Can Only 65-1500M, 65-1503M and 65-1505M colors: 10 Chartreuse/Blk Yellow/Black Red/Black 65-1500 65-1500M All others in colors: Orange/White Yellow/Black Blk/Chartreuse USA 1-800-435-1859 • www.cstberger.com • 1-815-432-9200 PRISMS Lighted Prism in Canister 2-1/2” (62.5mm) Prism in Canister A flashing red LED centered within allows easy targeting over long distances or under adverse weather conditions. Can be used with any offset and is compatible with all assemblies with M20 threads. These prisms will fit any prism holder with a M20x2 thread. Cat.# Decription 63-2011* Prism in Canister 63-2011S Prism in Canister (Seconds) 63-3011 Prism Copper Coated, in Canister Cat.# Decription 63-4011 Prism in Canister *-Specify color when ordering. If no color is specified, any color in stock will be shipped. Prism-Robotics System, Black Anodized Reflector System, -34mm Offset • High precision 360º robotic prisms ensure tracking lock with the robotic instrument is quick. • Dual 5/8-11 mounting threads (female). • Six high precision copper coated 25.4mm prisms housed in a precisly CNC machined aircraft grade aluminum housing. • Low cost– ideal for short range jobs where retrieving the reflector is not an option. • Brass push-button Leica style mounting mechanism. Cat.# Decription 63-4000 For Reflectorless Total Stations (Leica, Rentax, etc.) Leica® Compatible, 62.5mm • Featuring -34mm offset with Leica type H.I. and pushbutton mounting. • Hermetically sealed 62.5mm copper coated prism. • Color Available: Black/Yellow. Cat.# Decription 63-3000 Triangular Triple Tilt Prism Assembly, All Metal with Target 63-3010 GPH1A Type Single Tilt Prism Assembly 63-3020 GPH1 Type Single Tilt Prism Assembly, Co-Axial Target Decription 63-3022 GPH1 Type Co-Axial Single Tilt Assembly 63-3023 Same as Above Plus Target 63-3024 “Snap-In” Leica Type Prism Only 63-3025 Robotics Prism System- Zeiss, 100mm 65-360R-3 Robotics Prism System- Leica, 86mm 65-360R-4 Robotics Prism System- Trimble, 135mm “Snap-In”, Zeiss Compatible GPH1 Type “Snap-In” Single Holder • -35mm offset Leica type H.I. and push-button mounting. • High precision copper coated prism. • “Snap-in” prisms and holder are compatible and interchangeable with Zeiss/Trimble holders and prisms. 63-3026 Target Only for Above These prisms and holders are interchangeable with Leica/Wild holders and prisms. Cat.# Decription 63-5035CZ Snap-In Single Tilt Assembly with Target Optima®All-Metal, -35mm Offset Optima®, All-Metal, Leica® GPH1 Compatible • Optima’s aluminum target, holder, and yoke. • Optima’s lifetime warranty. • Aluminum coaxial target, holder, target. • Tension adjusting brass knob. • Nickel plated brass 5/8-11 bayonet adapter • Optima’s lifetime warranty. GPH1 Type Prism Assembly Robotics Prism System - Topcon, 77mm 65-360R-2 Spectra Precision® Compatible Prisms 63-3023 Cat.# 63-4020 Decription 65-360R-1 PRISMS • -34mm offset Leica type H.I. and push-button mounting. • High precision copper coated prism. • “Snap-in” prisms and holder are compatible and interchangeable with Leica/Wild holders and prisms. Decription Cat.# NOTE: One free adapter is supplied with each unit. Special adapters available to match different brand total stations. Specify when ordering: Topcon, Trimble, Leica, Zeiss, etc. Leica® Compatible, “Snap-In” Cat.# 65-360-3 Height 100mm 65-360-2 Height 86mm 65-360-1 Height 77mm Chartreuse/Blk Chartreuse/Blk Cat.# Decription 63-1035 35mm Offset Single Tilt Assembly Mini Prism, All-Metal, Zeiss Compatible Mini Prism, All-Metal, Leica® Compatible • Versatile for shots up to 3000’ (900m). • -34mm offset on dual aluminum tilting target. • On-board offset circular bubble vial. 65-3500M Cat.# Decription 65-3500M Peanut PackTM Mini Prism Assembly with Case and Point 65-3512 Copper Coated Mini Prism, Leica Type Chartreuse/Blk • -35mm offset, all-metal mini prism assembly. • 25.4mm diameter prism, sealed in black anodized aluminum can. • 5/8-11 mounting thread. • Precision prism ground up to 2 arc seconds. •On-board circular bubble vial. • Color available: Black with Chartreuse Target. Cat.# Decription 65-5035CZ Zeiss Type All Metal Mini Prism Ass. & Accessories USA 1-800-435-1859 • www.cstberger.com • 1-815-432-9200 11 PRISM AND RANGE POLES Quick-LokTM Adjustable Top Maxi-LiteTM, Adjustable Top • Sturdy and dent resistant aluminum construction. • 10th and metric (every 2mm) graduations • Warranted for life. High-grade, lightweight aircraft aluminum pole with easily visible precise level vial. Anoodized graduation marks. Easy grip handle with twist lock. Outer Pole Dia. Mounting Type Length Weight Section 67-4508TMA 8’ (2.5m) 1-1/4” (32mm) 5/8-11, Adj. H.I. 2 67-4708TMA 8’ (2.5m) 2.1 lbs. (0.95kg) 2 67-4508TML 8’ (2.5m) 1-1/4” (32mm) Leica Style 2 67-4712TMA 12’ (3.6m) 2.8 lbs. (1.27kg) 3 67-4509TMA 8’ (2.5m) 1” (25mm) 5/8-11, Adj. H.I. 2 67-4715TMA 15’ (4.6m) 3.8 lbs (1.72kg) 4 67-4509TML 6.5’ (2m) 1” (25mm) Leica GLS11 Tru-Lock 2 67-4512TMA 12’ (3.6m) 1-1/4” (32mm) 5/8-11, Adj. H.I. 3 67-4512TML 12’ (3.6m) 1-1/4” (32mm) Leica Style 3 67-4515TMA 15’ (4.6m) 1-1/2” (38mm) 5/8-11, Adj. H.I. 4 Cat.# Length Type Section 67-4515TML 15’ (4.6m) 1-1/2” (38mm) Leica Style 4 67-4908TMA 8’ (2.5m) Twist-Lok 2 67-4912TMA 12’ (3.6m) Twist-Lok 3 67-4915TMA 15’ (4.6m) Twist-Lok 4 Length Cat.# Section Twist-Lok, Telescoping–Value Line PRISM POLES AND ACCESSORIES Quick-LokTM Composite Prism Pole This pole is made of dent- and kink-resistant fiberglass composite sections and lightweight aircraft aluminum inserts. Cat.# 67-4608TMA Length Outer Pole Dia. 8’ (2.5m) 1-1/2” (38mm) Type Section 5/8-11 Quick-Loc 2 Tru-LockTM Adjustable Top • Impact-resistant DelrinTM is self-contained. • Non-slip positive clamping as well as quick release. • Recessed circular bubble vial. Cat.# Collet Lock, Brass Telescoping • High strength aluminum– resistant to warping and beakage. • Wild/Leica type mounting stud is available. • 5/8-11 mounting stud, 10ths/Metric graduations. 67-4209TM 8’ (2.5m) 1-1/4” (32mm) 67-4209TMA 8’ (2.5m) 1-1/4” (32mm) 67-4212TM 12’ (3.6m) 1-1/4” (32mm) 67-4212TMA 12’ (3.6m) 1-1/4” (32mm) 67-4215TM 15’ (4.6m) 1-1/2” (38mm) 67-4215TMA 15’ (4.6m) 1-1/2” (38mm) Type Adj. H.I.– 3” (75mm) 3 4 • One precise 10-minute vial. • Two viewing angles with large aperture: 7/16”. • Special penta prism allows direct reading of adjustable circular bubble. • Use with poles of 19-38mm (3/4” to 1-1/2”) diameter. 2 Cat.# Length 67-4304 4’ (1.25m) 1-1/4” (32mm) Non-Graduated 67-4308TM 8’ (2.5m) 1-1/4” (32mm) 10ths/Metric 2 67-4308TMA 8’ (2.5m) 1-1/4” (32mm) 10ths/Metric , Adj.H.I. 2 12’ (3.6m) 1-1/4” (32mm) 10ths/Metric, Adj.H.I. 3 67-4312TMA 12’ (3.6m) 1-1/4” (32mm) 10ths/Metric, Adj.H.I. 3 67-4312TM Outer Pole Dia. Type Section 2 Duralast Range Poles Constructed of a high strength aluminum core with alternating international orange and white ABS plastic tubing permanently attched to the aluminum. 5/8-11 thread joints for quick assembly. Includes solid steel hardened point. Cat.# Description Cat.# Outer Pole Dia. Sections (length) 06-751 Heads Up Rod Level use for poles w/ diameter 0.80” 68-3706 6-ft (1.8m) 11/16” (1.7cm) 2 (3-ft) 67-3708 8-ft (2.4m) 11/16” (1.7cm) 2 (4-ft) 68-3710 10-ft (3.0m) 11/16” (1.7cm) 2 (3-ft)+ 1 (4-ft) 68-3712 12-ft (3.6m) 11/16” (1.7cm) 3 (4-ft) 68-3715 2.5m 27mm 2 (1.25m) 68-3720 2m 27mm 2 (1m) BIPODS AND TRIPODS Side entry head with clamp for faster pole setup. The Quick-Loc systems allows nonslip quick clamping. The thumb release style allows easy adjustments with a push of a button. All fit 1” to 1-1/2” (25mm-38mm) poles. 0X 67-426 Cat.# Type Style Open Closed 67-4250 Tripod Quick Release 73” (185cm) 44” (112cm) 67-4260 Bipod Quick Release 73” (185cm) 44” (112cm) 67-4250X Tripod Thumb Release 71-1/2” (182cm) 42-1/2” (108cm) 67-4260X Bipod Thumb Release 71-1/2” (182cm) 42-1/2” (108cm) 67-4250QL Tripod Quik-Lok 71-1/2” (182cm) 41” (104cm) 67-4260QL Bipod Quik-Lok 71-1/2” (182cm) 41” (104cm) High strength aluminum tubing which is electrostatically powder painted white then striped red. 5/8-11 thread, includes replaceable hardened steel point. Description 68-3751 Range Pole Tripod 68-3950 Gator Tripod for range and prism poles 69-3808 Cat.# 68-3922 0 68-395 Constructed of heavy aluminum tubing and castings, with quality fittings for a long life of rough treatment. Length Range Pole, Poly-urethane Coated Range Pole Tripods 12 1-1/4” (32mm) Lightweight, 5/8-11 The clamping mechanism is a pistol grip, quick release. “Lock-TiteTM” holds set screw in position but allows adjustment of clamping tension to individual preference. 5/8-11 mounting stud. 4 Level-Rod, “Heads Up” 67-4250 2 8’/2.5m Quick Release, Precise 3 Adj. H.I.– 3” (75mm) Section 67-4409TMA 2 2 Type 1-1/4” (32mm) Standard, 5/8-11 2 Adj. H.I.– 3” (75mm) Outer Pole Dia. 8’/2.5m Section Mini Non-Graduated 67-4509TML Outer Pole Dia. 4’ (1.25m) 1-1/4” (32mm) 67-4408TMA Length 67-4204 67-4312TMA 67-4209TM 67-4608TMA 67-4512TMA Cat.# Length 67-4408TMA Cat.# Length Outer Dia. 68-3808 8’ (2.5m) 1” (2.5mm) Section(s) 68-3812 12’ (3.6m) 1” (2.5mm) 3 68-3815 2m 1” (2.5mm) 2 68-3817 3m 1” (2.5mm) 3 68-3818 1.8m 1” (2.5mm) 1, with point and cap 2 “Value Line” Telescoping Range Poles Cam-locking 2m telescoping sections feature alternating red and white stripes 20cm apart. Extruded lightweight aluminum. Cat.# Extended Length Collapsed Adapter Section 68-3922 2m 1.2m - 2 68-3922P 2m 1.2m 5/8-11 Prism 2 USA 1-800-435-1859 • www.cstberger.com • 1-815-432-9200 RANGE POLES Cat.# GPS ACCESSORIES TRIBRACHS Tripod-Precise GPS Antenna Features a 2m fixed or adjustable height atenna pole. Quick release tripod system allows fast and accurate set up. Cat.# Decription 69-100 GPS Antenna Tripod, adjustable 2m pole, fixed 2m spot 69-100A GPS Antenna tripod, non-adjustable 2m pole 69-101 GPS Antenna tripod, adjustable 2m pole 69-WDF30GPS Wood GPS tripod, adjustable 2m pole Value Line Tribrach Optical– 0.5-15m focus 61-4501 Value Line Tribrach Optical– 0.5-15m focus 61-4635 Laser Tribrach Laser– Dot r2mm@2m (6’) GPS tripod carrying case Adapters-Tribrach Cat.# Description 69-102 GPS Mag Mount Cat.# Description 69-102A GPS Mag Mount quick release adapter 61-2513 Adapter, 5/8-11 to Leica Type 69-104* GPS Receiver backpack w/ frame 61-2515 Leica Type Prism Adapter (up to 5/8-11) 69-105* GPS Receiver backpack w/ Quik-Lok antenna pole 61-2520 Chicago Fixed Tribrach Adapter 69-106 Quik-LokTM 2m GPS receiver pole 61-2521 Friction Type Rotating Tribrach Adapter 69-201 1m GPS range pole, yellow/black 61-2525 Zeiss/Wild Type Rotating Tribrach adj. 69-202 50cm GPS range pole, yellow/black 61-2526 Removable Center Only, 5/8-11 69-203 25cm GPS range pole, yellow/black 61-3510 Leica Style Adapter, Green w/Optical Plummet 69-204 10 minute vial with holder 61-3511GRY Pentax/Sokkia Style, Grey w/Optical Plummet 61-3511TYL Topcon Style Adapter, Yellow w/Optical Plummet 61-3520 Fixed Leica/Wild GRT-44 type, w/Optical Plummet 61-2520 TM GPS 2m Reciever Pole Cat.# Description 69-107* GPS Rover Rod 61-3511GRY 69-107 69-106 69-5988 Adapter - GPS Pole, 5/8-11 *-Standard color for backpacks is yellow; special colors are available: redorange, blue, or chartreuse (hi-vis green). Please specify when ordering. 69-104 Optical– 0.5-15m focus 61-4500 69-WDF30GPS GPS Accessories 69-102 Plummet Wild-Type Tribrach TRIBRACHS GPS ACCESSORIES 69-100 Description 61-3500 Several Colors to choose: BLK = Black, GRN=Green, GRY=Grey, and YEL=Yellow or TYL=TopCon Yellow. 69-ALQR30GPS Aluminum GPS tripod, adjustable 2m pole 69-103 Cat.# 69-107C GPS Composite Rover Rod *-Colors available: Sokkia teal blue, Topcon/Javad chartreuse, Trimble yellow or black. Please specify when ordering. 61-3510 61-3520 MAGNETIC LOCATORS High impact plastic case is water resistant, lightweight and epoxy sealed. On/Off, Volume, and Sensitivity Controls. “High-Tech” magnetic toroidal sensors and electronic balancing circuitry Description 19-550 MT100, Soft Case 19-551 MT100, Hard Case 19-555 MT101, Soft Case 19-556 MT101, Hard Case 19-557 MT102, Soft Case 19-558 MT102, Hard Case Cat.# Description 19-200SC MT200, Soft Case 19-200HC MT200, Hard Case 19-202SC MT202, Soft Case 19-202HC MT202, Hard Case Erase Power Line Feature Indicator MT100 MT101 MT102 P MT200 MT202 P P P P • • • • • • Model MT200 Sensitivity Control P P P P P Model MT102 Volume LCD Digital Low Battery Analog Bar Control Display Indicator Graph P P P P P P P P P P P P P P P Model MT101 Length: 42-3⁄4”; Weight: 3 lbs./1.3kg Waterproof up to housing; waterresistant housing Easy access battery compartment On/Off, Volume, and Sensitivity Controls Strong, lightweight aluminum tube with durable hard rubber tie “High-Tech” magnetic toroidal sensors and electronic balancing circuitry MAGNETIC LOCATORS Cat.# Features: Model el MT1000 Masonry/Magnetic Nails Hardened masonry nails are cadmium plated to resist rust and increase visibility. 100 nails per package. Cat.# Length 20-751I 3/4 in 1/8 in 20-752I 1 in 5/32 in 20-753I 1-1/4 in 3/16 in 20-754I 1-1/2 in 1/4 in 20-755I 2 in 1/4 in 20-756I 2-1/2 in 1/4 in USA 1-800-435-1859 • www.cstberger.com • 1-815-432-9200 Diameter 13 MEASURING WHEELS Professionals in many fields count on the Rolatape® Professional Series. Cat.# Wheel Diameter (Circ.) Counter Reading Wheels Wheel Stand Handle T 32-112 32-300 32-400 400 415 32-416M 416M 32-600 300 32-401 401M 32-415 112 600 623 4 in (1-ft) 11-1/2 in (3-ft) 15-1/4 in (4-ft) 387mm (1.2m) 15-1/4 in (4-ft) 387mm (1.2m) 23 in (6-ft) 23 in (6-ft) 9,999m 100,000 ft 10,000 ft/in Y 100,000 ft/in M, D, E 100,000 ft 9,999m M, D, E 100,000 ft MEASURING WHEELS M, D 100,000 ft Dual Plastic Single Steel Single Spoked Single Spoked Single Disk Single Disk Single Spoked Single Spoked - Available (Add “S”) Yes Yes Yes Yes - Yes 3-Section Insert & Lock Adjustable Adjustable Adjustable Adjustable Adjustable Adjustable Yes Yes Yes Yes Wheel Brake Yes Yes Other Packages Available including T Tenths, Y Yards, M Metric , DDual Counters, as well as Extended Model Designed to handle the needs of professionals and homeowners alike. While maintaining our focus Cat.# on quality and accuracy, the Measure Master® Commercial Series features Wheel Diameter (Circ.) an axle driven counter that Counter Reading adds in forward and subtracts in reverse. Wheels 32-12* 32-TWIN* 32-30* 32-50 32-66 MM-12 MM-TWIN MM-30 MM-50 MM-6.6 4 in (1-ft) 4 in (1-ft) 11-1/2 in (3-ft) 19 in (5-ft) 25 in (6-ft) 10,000 ft/in 10,000 ft/in 10,000 ft/in 10,000 ft/in 10,000 ft/in Single Dual Single Single Single - - Yes - - 3-Section 3-Section Insert & Lock Insert & Lock Insert & Lock Wheel Stand Handle * Also available in Tenths and Metric. Add “T” for Tenths, and “M” for Metric ( i.e. cat.# 32-12T ). Quality and accuracy at an affordable price. Cat.# Wheel Diameter (Circ.) Counter Reading 32-EZ1 32-EZ2 32-EZ3 32-EZ4 EZ-1 EZ-2 EZ-3 EZ-4 4-in (1-ft) 4-in (1-ft) 11 1/2-in (3-ft) 15 1/4-in (4-ft) Measure and mark while you walk with ProMarker® marking wand. Cat.# 32-PMW Marker Wand Wheel Diameter (Circ.) Counter Reading 4” (1’) 10,000 ft/in 32-30PM MM-30 PM 11-1/2” (3’) T,M 100,000 ft/in 32-400PM 400 PM 15-1/4” (4’) M 100,000 ft 9,999-ft 9,999-ft 9,999-ft 9,999-ft Single Dual Single Single - - Yes Yes 3-Section 3-Section Snap-Lock Steel Latch - - - Yes Accurate, well balanced, easily portable for many applications. CST wheels feature a gear driven counter made from Cat.# wear resistant Delrin® enclosed in a weather Wheel Diameter resistant professional Wheel Type designed housing. 31-40M 31-308 31-20M 31-10M 31-108 31-04P 318mm 10 in 97mm 97mm 4 in 4 in Wheels Wheel Stand Handle Wheel Brake Counter Reading Wheels Wheel Stand *Add a “-P” when ordering (i.e. 31-308-P) 14 32-623 Handle Integated Paint System Wheels n/a Wheel Stand Handle Single Single Spoked - Yes Yes Trigger Adj. w/Trigger Adj. w/Trigger Wheel Brake Yes Other Packages Available including T Tenths (32-MM-30TPM), M Metric (#32-30MPM and #32-400MPM) Aluminum Aluminum ABS Plastic ABS Plastic ABS Plastic ABS Plastic 1,000 m/dm 10,000 ft/in 1,000 m/cm 10,000 m/cm 10,000 ft/in No Counter Single Single Dual Single Single Single Yes Yes Snap-Lock Snap-Lock 3-Section 3-Section 3-Section 1-Section - *Available - - - Yes USA 1-800-435-1859 • www.cstberger.com • 1-815-432-9200 MEASURING TAPES 3:1 Gear Ratio for Faster Rewind 3:1 Gear Ratio for Faster Rewind Pro-Series Fiberglass Tapes Pro-Series Nylon-Clad Steel Tapes These Pro-Series Fiberglass Tapes are made with nonwoven PVC-coated fiberglass of superior durability. An indispensable measuring tool designed for the precisionminded user. Open reels feature new rubber reinforced, rounded design, large soft rubber grip handle. 1⁄2” tape width. Sides UOM End Type 300-ft (91m) 2 10th/100ths, M/cm/2mm 73-Y3001M 82-30010A 300-ft 1 Ft/10ths/100ths Type A end 74-Y3008M 300-ft (91m) 2 Ft/8ths, M/cm/2mm 73-Y3008M 82-30010B 300-ft 1 Ft/10ths/100ths Type B end 74-Y3001 300-ft 1 Ft/10th/100ths 73-Y3001 82-30080A 300-ft 1 Ft/Inches/8ths Type A end 74-Y3008 300-ft 1 Ft/Inches/8ths (16” Center) 73-Y3008 82-30080B 300-ft 1 Ft/Inches/8ths Type B end 74-Y2001 200-ft 1 Ft/10th/100ths 73-Y2001 82-30018B 300-ft 2 Ft/10ths, Ft/Inches Type B end 74-Y2008 200-ft 1 Ft/Inches/8ths (16” Center) 73-Y2008 82-20010A 200-ft 1 Ft/10ths/100ths Type A end Cat. # Length Sides UOM Refill No. Cat. # 74-Y1658M 165-ft (50m) 2 Ft/8ths, M/cm/2mm 73-Y1658M 82-20010B 200-ft 1 Ft/10ths/100ths Type B end 74-Y1651M 165-ft (50m) 2 10th/100ths, M/cm/2mm not available 82-20080A 200-ft 1 Ft/Inches/8ths Type A end 74-Y1001M 100-ft (30m) 2 10th/100ths, M/cm/2mm 73-Y1001M 82-20080B 200-ft 1 Ft/Inches/8ths Type B end 74-Y1008M 100-ft (30m) 2 Ft/8ths, M/cm/2mm 73-Y1008M 82-1651MA 165-ft/50m 2 M/10ths Type A end 74-Y1001 100-ft 1 Ft/10th/100ths 73-Y1001 82-1658MA 165-ft/50m 2 M/Inches Type A end 74-Y1008 100-ft 1 Ft/Inches/8ths (16” Center) 73-Y1008 82-10010A 100-ft 1 Ft/10ths/100ths Type A end 74-Y501M 50-ft (15m) 2 10th/100ths, M/cm/2mm not available 82-10010B 100-ft 1 Ft/10ths/100ths Type B end 74-Y508M 50-ft (15m) 2 Ft/8ths, M/cm/2mm not available 82-10080A 100-ft 1 Ft/Inches/8ths Type A end 74-Y501 50-ft 1 Ft/10th/100ths 73-Y501 82-10080B 100-ft 1 Ft/Inches/8ths Type B end 74-Y20M 20m 2 M/cm/2mm, M/cm 73-Y20M 82-10018B 100-ft 2 Ft/10ths, Ft/Inches Type B end 74-Y30M 30m 2 M/cm/2mm, M/cm 73-Y30M 82-1001MA 100-ft/30m 2 M/10ths Type A end 100-ft/30m 2 M/Inches Type A end 30m 1 Metric Type A end 82-50MA 50m 1 Metric Type A end 82-100MA 100m 1 Metric Type A end 74-Y50M 50m 2 M/cm/2mm, M/cm 73-Y50M 82-1008MA 74-Y100M 100m 2 M/cm/2mm, M/cm 73-Y100M 82-30MA “PRO-SERIES” POCKET TAPES PLUMB BOB TARGETS Power return features a smooth gliding action with a positive thumb lock and release. Weatherproof, impact-resistant plastic cases are enclosed in a rubber housing. Cat. # Length Side 78-R251 25-ft ft/10ths/100ths 78-R258 25-ft ft/in/8ths 78-R075M 7.5m m/cm/mm 78-R258 25’ Tape Precision machined for perfect balance and lacquered for a lasting finish. Includes a hardened steel point with ASA thread. Steel ASA screw cap allows storage for an extra point. Size-Weight Cat. # Description 11-425 4-in x 4-in Pressure Sensitive Target, Peel-Off Sheet 11-426 8-in x 8-in Pressure Sensitive Target, Peel-Off Sheet 11-431 2-in x 4-in Plastic Rectangular Target, red & white, notched 11-432 2-1/2-in x 4-in Translucent Yellow Target GAMMON REELS An aid to set up and deploy a clean, accurate plumb. Slip the reel into your palm and draw the bob to desired position and stop with finger pressure. Steel clock spring zips the string back into case. BRASS PLUMB BOBS Cat. # MEASURING TAPES Length 74-Y3001M Cat. # Size-Weight 11-497 6 oz. (170g) 11-553 18 oz. (510g) 11-498 8 oz. (225g) 11-554 24 oz. (680g) 11-499 10 oz. (285g) 11-554A 32 oz. (910g) 11-550 12 oz. (340g) 11-554B 80 oz. (2270g) 11-551 14 oz. (400g) 11-555A Extra cap only 11-552 16 oz. (455g) 11-555B Extra point only Cat. # Description 11-728 Gammon Reel®, with hi-vis black and orange target 11-729 12-in / 3.6m Gammon Reel® 11-730 6 1/2-in / 1.9m Gammon Reel®, with 72 lb. test Orange nylon cord 11-731 Bobbin of Orange Nylon Cord, 24 yds./21.9m REPLACEMENT PLUMB BOB CORD Braided linen cord comes in 25 yd. spools. Cat. # Description 11-732 White- Heavy 11-733 White- Medium 11-735 Orange- Medium USA 1-800-435-1859 • www.cstberger.com • 1-815-432-9200 15 www.cstberger.com Proven. Innovative. One Solution. TM Phone: 815-432-9200 Toll: 800-435-1859 Fax: 815-432-5390 ™ ™ ©Copyright 2009, Robert Bosch Tool Corporation 2610A00599 00-FLCAT rev4 (0909) JG