docsaeco - Gastro Medinox Kft.
download 
Report Transcription
saeco - Gastro Medinox Kft.
Spare parts for: Domestic Suitable for: <T1 SAECO T1> Rel. 2015-10211639 This catalogue is automatically generated. Therefore, the sequence of the items might not be always shown at best. Updates will be issued in case of additions and/or amendments. Suitable universal spare parts may not be included <T1 T1> SAECO Suitable for: Suitable for: 1095017 <| T 2 > Baffles < T 2 |> BACK BUSHING SINGLE HOOK 1095012 <| |> BROW N COFFEE CONVEYOR for solubles box scroll SAECO 9111.758.060 1095006 <| |> COIN CONVEYOR BOTTOM BLACK SAECO 0701.125 1095018 <| SAECO 0701.125.060 |> DISC FAN FOR M IXER FUNNEL external ø 30 mm - shaft hole ø 6x4.5 mm SAECO 9111.357.050 1095013 <| |> DRIPPING TRAY CONVEYOR SAECO 9111.228.060 1095010 <| |> FRONT BUSHING BROW N for powders box SAECO 9161.016.060 1095087 <| SAECO 9111.018 |> FUNNEL FOR M IXER <| 1095021 |> FUNNEL SUPPORT <| SAECO 0V2519 1095007 <| SAECO 9111.018.060 |> FUNNEL LID BROW N SAECO 9111.010.060 1095002 |> GROUNDS CONVEYOR BASIN BLACK dimensions 285x120 mm - height 100 mm SAECO 1813.141 SAECO 200005 SAECO 9111.347.050 <T1 T1> SAECO Suitable for: 1095003 <| Suitable for: |> GROUNDS CONVEYOR BASIN BLACK 1095005 <| |> height 390 mm SAECO 0875.155.050 1095016 <| |> SAECO 0862.111.050 JOINT FOR BOX SPRING 1095019 <| SAECO 9111.017.060 1095008 <| |> 1095020 |> |> LOCKING RING NUT FOR M IXER FUNNEL SAECO 9111.230.270 M IXER BOD Y FUNNEL 1240097 <| SAECO 9111.227.060 <| GROUNDS CONVEYOR BASIN BLACK height 310 mm |> M IXER M OTOR SUPPORT SAECO 9111.226.060 POW D ERS BOX FUNNEL BROW N 1095009 <| |> SAECO 9111.675.150 PUSHING ROLLER ø 8x36 mm for spoons and sugar dispenser SAECO 9111.009 1095115 <| |> SAECO 9111.009.060 REAR D OUBLE HOOK BUSHING SAECO 0875.263 1095022 <| |> for soluble hopper scroll SAECO 9111.016 1095014 <| |> SAECO 9111.016.060 SOLUBLES BOX FUNNEL SAECO 9111.629.060 SHAPED GASKET ø 63 m m for funnel SAECO 9111.011.060 1095011 <| SAECO 9111.421 |> SUGAR CONVEYOR <T1 T1> SAECO Suitable for: Suitable for: Ball valves and accessories < T 2 3526699 <| |> BALL VALVE ø 1/4" M F T 2 > |> <| SAECO WGA5001016000 1028009 <| |> LEFTHAND SIDE PANEL SILVER 1028004 <| SAECO 1047.006.A30 1028005 <| T 2 > Bodies < T 2 |> |> SIDE RIGHTHAND PANEL SILVER SAECO 1047.005.A30 TOP FRONT PANEL SILVER |> <| width 375 mm SAECO 1037.007.A30 SAECO 1047.007.A30 Boiler safety valves < T 2 1523537 <| |> BOILER VALVE ø 1/4"M 1523571 <| stainless steel - old model or viton SAECO WGADM2186 |> BOILER VALVE ø 1/4"M - 1.8 bar CE/PED calibration pressure 1.8 bar steam outlet flow rate 43.3 Kg/h silicone seal operating temperature -30/+160°C CE/PED certified valve SAECO T 2 > <T1 T1> SAECO Suitable for: 1523572 <| Suitable for: |> BOILER VALVE ø 3/8"M - 1.8 bar CE/PED |> <| calibration pressure 1.8 bar steam outlet flow rate 77 Kg/h viton seal operating temperature -20/+200°C CE/PED certified valve for GAGGIA GE-GD-XE-XD-E90-D90-LCD SAECO 12001711 1048011 <| T 2 > Boilers < T 2 |> BOILER ASSEM BLY 230V 1048001 <| |> BOILER M 5000F 230V with sensor and cable SAECO 11002023 5061025 <| |> SAECO 11012477 BOILER SLIM 1100W 230V SAECO 286471158 5058557 <| |> hose end fitting ø 5 mm additional heating element 437W 230V 1048007 |> BOILER SLIM 1300W 230V hose end fitting ø 5 mm SAECO 11004667 <| SAECO 286472858 SAECO 11013735 BOILER TOP CASE 1048013 <| |> BOILER UPPER BODY with heating element1000W 230V SAECO 20000460 1048002 <| |> SAECO 9011.044.00A BOILER 1090W 230V SAECO 282056258 SAECO 9019.A59.00A SAECO 11000395 5025969 <| |> SAECO 282058858 SAECO 11002259 BOILER 1100/437W 230V <T1 T1> SAECO Suitable for: 1048006 <| Suitable for: |> BOILER 1100W 230V 1048012 <| SAECO 9010.142.00A 5038339 <| |> 1048004 |> BOILER 120/220/240V 570/680W BOILER 437/1090W 230V <| 1048031 1330001 BOILER 1300W 230V SAECO 11011341 |> SAECO 9019.A61.00A T 2 > Booster pumps < T 2 <| |> SAECO 11001750 SAECO 9019.A19.00A BOILER 1100W 230V SAECO 282058758 <| SAECO EF0030/A <| |> |> ROTARY VANE PUM P ROTOFLOW ø 3/8" NPT |> <| clamp connection flowrate 100 L/h equipped with balanced bypass connection ø 3/8" conical NPT N.S.F. approved SAECO DM0217/002/PG 1384001 <| T 2 > Brushes < T 2 |> BRUSH FOR COFFEE SHOW ER SAECO WGA5001033000 1384009 <| |> SAECO 127390100 CLEANING BRUSH SAECO 9991.068 <T1 T1> SAECO Suitable for: Suitable for: Cappuccino makers - Cappuccinatore < T 2 1079018 <| |> CAPPUCCINATORE CONNECTOR TUBE 1079009 <| SAECO 142270200 1079008 <| |> COM PLETE SM ALL BLACK CAPPUCCINATORE 1079001 |> COM PLETE SM ALL CAPPUCCINATORE W HITE 1079015 1079010 |> SPHERICAL CAPPUCCINATORE S/STEEL |> SAECO 20000454 CAPPUCCINATORE PIN SAECO 1022.R01.050 5500786 <| SAECO 142520130 <| CAPPUCCINATORE V2 SAECO 11006073 <| SAECO 142520150 <| |> |> T 2 > SAECO 148870150 PIN FOR W HITE CAPPUCCINATORE SAECO 148870130 <| |> SAECO 222520550 1439037 <| T 2 > Caps < T 2 |> SAECO NR07.040 CONICAL PLUG ø 1/8"M FOR SOLENOID VALVE <| |> <T1 T1> SAECO Suitable for: Suitable for: Castors, rollers and accessories < T 2 1346001 <| |> W HEEL ø 16 mm T 2 > |> <| for casing bottom SAECO 11000223 Centrifugal fans < T 2 3240735 <| |> CENTRIFUGAL FAN CAP05B-072 3240727 <| |> 230V 50/60Hz 20W 2370 Rpm air outlet 38x35 mm with flange air inlet with sleeve internal ø 38.5 mm external ø 41 mm SAECO 9121.009 3449406 <| SAECO 9121.198.00A T 2 > Clamps |> DOUBLE-W IRE CLAM P 11-11.6 - 100 PCS 3449404 <| |> for hoses ø 11÷11.6 mm 1449126 |> SAECO 184320200 HOSE CLAMP ø 5.8-7.0 mm 5035467 <| SAECO NF11.052 1160339 |> HOSE CLAMP ø 7.8-9.5 mm SAECO 12000892 T 2 > Coffee filters < T 2 <| DOUBLE-W IRE CLAM P 8.8-9.3 - 100 PCS for hoses ø 8.8÷9.3 mm SAECO NV99.087 <| CENTRIFUGAL FAN CAP07B-022 230V 50/60Hz 26W 2420 Rpm air discharge spout 36x54 mm with flange distance between holes 30x60 mm SAECO 9121.009.00A < T 2 |> T 2 > BLIND FILTER SAECO WGANF08/006 1160262 <| |> FILTER 2-CUP 14 g SAECO WGANF08/005/B <T1 T1> SAECO Suitable for: 1160199 <| Suitable for: |> 1 CUP FILTER 1160251 <| SAECO 124653221 1160261 <| |> 1160200 <| SAECO WGANF08/004/B 1192077 1192039 |> BLACK COFFEE ASSEMBLY |> 5500672 <| SAECO 11005921 5064999 |> SAECO 11012810 1192016 <| T 2 > |> |> BLACK COFFEE GROUP SAECO 11004183 BLACK DREGS EJECTOR ø 36 mm 5055436 <| SAECO 322001050 <| 2 CUPS FILTER Coffee groups SAECO 11002145 <| |> SAECO 124650221 < T 2 <| 1 CUP FILTER 6 g SAECO WGANF08/002/B 1 CUP FILTER 7 gr SAECO NF08/004 |> |> SAECO 225800559 SAECO 9160.070.150 BREW GROUP V4 OCS BLACK SAECO 11011768 BREW GROUP 8 g 1192028 <| SAECO 421944037611 |> BROW N HOPPER FOR COFFEE GROUP SAECO 0701.R09.060 COFFEE DELIVERY VALVE 1090039 <| |> SAECO 322001201 COFFEE DOSER OUTLET CONVEYOR ASSY for coffee grinder SAECO 11003468 SAECO 20006884 SAECO 11004685 SAECO 11007647 SAECO 11012564 SAECO 11026355 SAECO 222870250 <T1 T1> SAECO Suitable for: 1192018 <| Suitable for: |> COFFEE GROUP BLACK SAECO 11004180 1192037 <| |> SAECO 11004189 COFFEE GROUP SM ART-V3 BLACK SAECO 11003426 1192021 <| |> 1192029 <| SAECO 9160.067.150 1192014 1192025 |> COFFEE OUTLET HOSE GREY 1192024 5072594 |> 1192027 1192126 |> |> COFFEE OUTLET HOSE GREY |> COFFEE TAM PER PISTON ø 36 m m BROW N SAECO 322000901 COFFEE-CONTAINER FOR GROUP <| 1192032 CONNECTION COUPLING <| SAECO 11003075 <| COFFEE GROUP 7P BROW N SAECO 9161.034.150 <| SAECO 0311.024.150 <| |> SAECO 9160.002.060 <| SAECO 9161.195.150 <| COFFEE GROUP SHOW ER PIN SAECO 9169.A14.060 <| SAECO 225802550 COFFEE HOPPER FOR GREY GROUP |> |> COFFEEE GROUP SCRAPER SAECO 11003213 1192914 |> CONNECTION FITTING BROW N for coffee group SAECO 0701.R04.150 SAECO 0701.R04.060 SAECO 322000501 <T1 T1> SAECO Suitable for: 5063245 <| Suitable for: |> COUNTERPISTON FOR COFFEE GROUP 8 g <| 1192023 GREY HANDLE <| SAECO 11001840 1192066 <| |> |> GLASS BALL ø 5 mm FOR GROUP SAECO 421944034451 5060580 |> SAECO 9991.168 GROUP COFFEE 8 g 5 bar for brew group SAECO 9161.069.150 1192197 <| |> SAECO 11012382 GROUP COFFEE 8 g 8 bar 1192035 <| |> GROUP PIN BROW N for old type coffee groups SAECO 11009266 5059828 <| |> SAECO 322001101 HOPPER BLACK FOR COFFEE GROUP 1192067 <| SAECO 149261350 5063244 <| |> 1192913 |> 1192033 <| SAECO 11009276 SAECO 9169.A14.150 SAECO 322001659 |> PISTON BLOCK FOR COFFEE GROUP GREY SAECO 9161.193.150 SHOW ER PIN GREY SAECO 0701.R05.050 PIN FOR SHOW ER SAECO 227470150 PIPE COUNTER-PISTON GROUP SAECO 11002617 <| |> 1192912 <| SAECO 9169.A14.050 |> SLEEVE REPLACEM ENT GROUP GREY SAECO 0301.R04.150 SAECO 322003759 <T1 T1> SAECO Suitable for: 5067819 <| Suitable for: |> TUBING FOR W ATER INLET BLACK <| 1192911 W ATER INLET HOSE GREY <| SAECO 20000440 1192026 <| |> |> VALVE REGULATOR SAECO 11005099 1192038 |> SAECO 145893000 SAECO 9011.099 W ATER INLET VALVE for coffee group SAECO 9161.064 SAECO 9161.064.150 SAECO 11005060 Coffee measuring spoons < T 2 1069001 <| |> PLASTIC M EASURING SPOON 20 ml SAECO WGADM1017 SAECO 146680150 3070062 |> <| SAECO 146680159 Compressors and spares < T 2 <| |> COM PRESSOR CUBIGEL GD40M B-d CSIR 3070216 <| |> power 1/8 HP. displacement 4.05 cc 220/240V 50Hz CUBIGEL 1443011 <| COM PRESSOR EMBRACO EM T6152GK CSIR SAECO 1603.R02.00A Contact thermostats |> CONTACT THERM OSTAT 100°C M 4 5015665 <| |> for coffee group SAECO WGADM1561 T 2 > 220/240V 50Hz power 1/5 Hp, displacement 4.50 cc gas R404a/R507 HMBP ASPERA SAECO 1601.R01.00A < T 2 T 2 > SAECO 189425900 CONTACT THERM OSTAT 135°C T 2 > <T1 T1> SAECO Suitable for: 1444601 <| Suitable for: |> CONTACT THERM OSTAT 150°C 1443040 <| |> CONTACT THERM OSTAT 175°C with manual reset - for boiler SAECO NE09.021 1443046 <| |> SAECO 189427500 CONTACT THERM OSTAT 90°C 1443036 <| |> SAECO 189428200 SAECO 189428700 CONTACT THERM OSTAT 95°C 10A 250V for SAECO SUPERAUTOMATICA SAECO 189421400 5500425 <| |> SAECO 189422000 THERM OSTAT CONTACT 127°C 1443083 <| SAECO 189425100 5071524 <| |> |> THERM OSTAT CONTACT 175°C SAECO 12001034 THERM OSTAT CONTACT 190°C |> <| SAECO 12001033 1080119 <| T 2 > Containers for coffee < T 2 |> COFFEE HOPPER 1080131 <| |> COFFEE HOPPER dimensions 240x118x80 mm SAECO 0311.007.230 1080136 <| |> SAECO 222711880 COFFEE HOPPER LID SAECO WGAMDB0226/CL SAECO 0329.006.230 1319277 <| |> SAECO 11002278 RELEASE PUSH-BUTTON FOR COFFEE HOPPER GR SAECO 11002280 SAECO 11007379 <T1 T1> SAECO Suitable for: 1080116 <| Suitable for: |> W ATER/COFFEE HOPPER LID SAECO 0301.022.380 SAECO 0301.022.770 1080106 SAECO 20006540 Containers for vending machines < T 2 <| |> <| |> COFFEE HOPPER 1080105 <| |> height 150 mm width 117 mm max depth 300 mm external socket union ø 39 mm internal socket union ø 35 mm SAECO 11007014 1080197 <| |> SAECO 9110.010.060 COFFEE HOPPER CLOSING SHEET 1080129 <| SAECO 9111.078.060 1080120 <| |> COFFEE HOPPER BROW N height 310 mm width 82 mm max depth 310 mm external socket union ø 40 mm internal socket union ø 30 mm COIN BOX |> SAECO 0702.014 1080104 <| COFFEE HOPPER SUPPORT BROW N SAECO 0702.014.060 |> CUPS HOLDER CAROUSEL height 545 mm SAECO 1813.017 1080108 <| |> SAECO 9111.152 DOUBLE BOX W ITH AGITATORS 1080107 <| dimensions 225x155x485 mm SAECO 11001969 |> DOUBLE EXTENSION FOR SOLUBLES BOX dimensions 225x155x155 mm internal length 145 mm SAECO 9111.681 T 2 > <T1 T1> SAECO Suitable for: 1080110 <| Suitable for: |> POW D ERS BOX 1080132 <| |> height 240 mm width 74 mm max depth 260 mm SAECO 9111.012 1080121 <| |> SAECO 9111.012.100 POW D ERS BOX LID BROW N SAECO 9111.068.100 1080111 <| |> simensions 264x76 mm 1080152 |> SAECO 9110.101 SUGAR CONTAINER CAP 1080128 <| |> size 149x112 mm 1080102 |> SAECO 9111.702 W HEEL FOR SOLUBLES BOX BROW N 1080109 <| |> external ø 125 mm SAECO 9111.014 1185003 4 COLUM N CUPS HOPPER height 110 mm SAECO 9111.014.060 SAECO 1813.076.060 Cup support grids < T 2 <| W HEEL FOR SOLUBLES BOX external ø 143 mm - central hole ø 8 mm SAECO 1813.098 <| SUGAR BOX height 225 mm width 110 mm max depth 150 mm SAECO 9111.013.060 <| POW D ERS BOX height 168 mm width 75 mm max depth 260 mm |> CUP SILVER GRID SAECO 0314.016.210 SAECO 0314.016.770 <| |> SAECO 21000252 T 2 > <T1 T1> SAECO Suitable for: Suitable for: Delivery compartments f.vending machines < T 2 1242002 <| |> LOCKING LEVER FOR D ELIVERY COM PARTM ENT T 2 > |> <| SAECO 9111.372.050 1092005 <| T 2 > Detergents < T 2 |> DETERGENT SAECO/GAGGIA IN TABLETS 3092251 <| |> blister pack 10 tablets 1.6 g for the cleaning of small coffee groups detergent for COFFEE MACHINES - SUPERAUTOMATIC MAC please see the attached documentation for use SAECO 21001685 3092250 <| |> SCALE REM OVER AXOR DE-CAF 10 BAGS granular bags 30 g removes scale residues from the hydraulic system and coffee machines boilers house hold type, it does not corrode nor leaves residues f/COFFEE MACHINES SAECO-GAGGIA-LAVAZZA-PAVONI-SGL MITACA-GRIMAC-RDL-SPINEL-DELONGHI-ETC. please see the attached documentation for use SAECO SCALE REM OVER AXOR RIO 250 ml |> <| removes scale residues from the hydraulic system and coffee machines boilers household type. it does not corrode nor leaves residues for SAECO-GAGGIA-LAVAZZA-PAVONI-SGL TYPE MACHINES MITACA-GRIMAC-RDL-SPINEL-DELONGHI-ETC. please see the attached documentation for use SAECO 21001030 1398001 <| T 2 > Door catches < T 2 |> SAECO NF11.036 DOOR CATCH SAECO 12000731 1398002 <| |> SAECO 12000440 PANEL CLOSING CATCH SAECO 149254400 <T1 T1> SAECO Suitable for: Suitable for: Dosers for coffee < T 2 1090037 <| |> ARM M OVEM ENT LEVER 1090038 <| |> for cups dispenser 1090031 |> SAECO 9111.483.060 COFFEE GRINDER DISPENSER EXTERNAL BODY 1090035 <| SAECO 1813.041.A20 1090036 <| |> 1090033 |> |> COFFEE GRINDER DISPENSER INTERNAL BOD Y SAECO 1813.040.A20 DOSER ASSEM BLY 220/230V 50Hz SAECO 1813.A10.A2A <| COFFEE DOSER OUTLET CONVEYOR ASSY for coffee grinder SAECO 1813.184.050 <| T 2 > 1090032 <| SAECO 1813.A10.A2N SPOONS DISPENSER EJECTOR BLACK |> REGULATION BRACKET FOR COFFEE DOSER SAECO 1813.044.A20 |> <| SAECO 11010332 1449271 <| T 2 > Drain hoses < T 2 |> DRAIN PIPE ELISPIR ø 14x20 m m - 30 m alimentary SAECO WGA5001024000 1449671 <| |> DRAIN PIPE ELISPIR ø 14x20 m m - 5 m alimentary SAECO WGA5001024000 <T1 T1> SAECO Suitable for: Suitable for: 1527537 <| T 2 > Drain tanks < T 2 |> DRAIN TRAY |> <| dimensions 100x80x48 mm SAECO WGA4001097000 1015016 <| T 2 > Drip trays for coffee and bar < T 2 |> BLACK DRIP TRAY 1527006 <| |> BLACK DRIP TRAY dimensions 200x165x75 mm SAECO 0862.035.050 1527012 <| |> BLACK DRIP TRAY SAECO 149641350 1527016 <| |> BLACK DRIP TRAY max. overall dimensions 270x128 mm SAECO 11000277 1527015 <| |> SAECO 11002272 DRAIN TRAY 1527013 <| |> SAECO 11007935 DRIP TRAY SUPPORT dimensions 305x112 mm SAECO 1034.018.150 1527017 <| |> DRIP TRAY SUPPORT SAECO 11004092 1527007 <| |> SILVER DRIP TRAY max. dimensions 328x230 mm SAECO 11001295 SAECO 0311.005.580 <T1 T1> SAECO Suitable for: 1527022 <| Suitable for: |> W HITE DRIP TRAY |> <| dimensions 200x165x75 mm SAECO 149641330 1050005 <| T 2 > Electrical cables < T 2 |> CABLE FLAT 26-POLE 1200 m m 1050019 <| |> POW ER CORD 16A 250V 2000 m m for board/keyboard connection SAECO 0721.889 SAECO 183911050 1050004 <| T 2 > Electrical sockets < T 2 |> THREE-POLE ELECTRIC SOCKET 10A 250V |> <| SAECO 187850400 1121001 <| |> DOSER ELECTROM AGNET PIN 1121002 <| |> ø 4x25 mm SAECO 1813.092 1054048 ELECTROM AGNET 220/230V 50Hz for spoons dispenser SAECO 9121.224.00A Electronic boxes < T 2 <| T 2 > Electromagnets < T 2 |> DOSER CONTROL BOX 2 GROUPS 230V SAECO DM2181/02/230 SAECO DM2182/02/230 <| |> SAECO 9121.235.00A T 2 > <T1 T1> SAECO Suitable for: Suitable for: Electronic printed-circuit boards < T 2 1390033 <| |> CIRCUIT BOARD 230V FOR M IXER 1390017 <| |> dimensions 60x47 mm SAECO 9121.118.00A 1390018 <| |> CPU CIRCUIT BOARD SAECO 11000262 1390022 <| |> dimensions 180x195 mm 1390027 |> CPU CIRCUIT BOARD 1390029 |> 1390030 SAECO 1873.601 CPU CIRCUIT BOARD 1390034 <| |> dimensions 160x110 mm 1390037 |> SAECO 11010780 CPU CIRCUIT BOARD 1390079 <| |> dimensions 160x100 mm SAECO 1863.635 CPU CIRCUIT BOARD dimensions 180x110 mm SAECO 1813.611 <| CPU CIRCUIT BOARD dimensions 160x100 mm SAECO 11006111 |> CPU CIRCUIT BOARD SAECO 11008979 <| dimensions 180x110 mm <| SAECO 20000653 dimensions 160x100 mm SAECO 11012097 <| CPU CIRCUIT BOARD dimentions 120x80 mm CPU ELECTRONIC BOARD size 160x100 mm SAECO 11003217 T 2 > <T1 T1> SAECO Suitable for: 1390036 <| Suitable for: |> DISPLAY CIRCUIT BOARD 5500667 <| |> dimensions 117x38 mm SAECO 11000299 1390031 <| |> SAECO 0313.804 LEVEL CONTROL CIRCUIT BOARD 5064998 <| SAECO 0347.816 |> dimensions 35x19 mm 7101458 |> SAECO 11012593 PC BOARD SENSOR HAL 506 SF-K 1390024 <| |> dimensions 23x10 mm 1390028 |> POW ER CIRCUIT BOARD SAECO 11008068 1390035 <| |> dimensions 270x100 mm 1390021 |> POW ER CIRCUIT BOARD dimensions 178x120 mm SAECO 0894.640 <| POW ER CIRCUIT BOARD dimensions 180x125 mm SAECO 181540900 <| PC BOARD CPU V2 230V dimensions 135x140 mm SAECO 11000651 <| DISPLAY CIRCUIT BOARD dimensions 80x40 mm SAECO 1813.613 POW ER ELECTRONIC CIRCUIT BOARD 1390023 <| |> STEAM TAP CIRCUIT BOARD size 180x160 mm SAECO 1863.636 SAECO 11004842 SAECO 11007569 <T1 T1> SAECO Suitable for: Suitable for: 1313022 <| T 2 > Feet < T 2 |> ADHESIVE FOOT 20x20 m m |> <| SAECO 147623150 Filter holder couplings < T 2 5500484 <| |> FILTER HOLDER COUPLING BELL T 2 > |> <| SAECO 220290300 Filter holder gaskets < T 2 5027216 <| |> FILTER HOLDER GASKET ø 55 mm 1186998 <| SAECO 145849762 1786055 <| |> FILTER HOLDER GASKET ø 68x47.8x5 mm |> FILTER HOLDER GASKET ø 66x36x16 mm SAECO 145841500 1186676 <| |> FILTER HOLDER GASKET ø 72x56x8.5 mm with external cuts SAECO 145840561 1486003 <| |> GASKET FILTER HOLDER ø 79x56x6.5 mm ORIGINAL SAECO 11004543 SAECO WGANG01/001/B <| |> T 2 > <T1 T1> SAECO Suitable for: Suitable for: Filter holders for coffee machines < T 2 1165109 <| |> COM PLETE FILTER HOLDER 1 CUP GAGGIA 1165026 <| |> spout connection ø 3/8" - knob connection M10 wings 7 mm - without spring or filter 5052121 |> SAECO WGA26G0104 JET SW IRL EM ULSIFIER BLACK 1165043 <| |> for filterholder 1165044 |> SAECO 11008490 PRESSURIZED FILTER HOLDER ASSEMBLY SAECO PRESSURIZED FILTER HOLDER ASSEMBLY SAECO 2cups - black - aluminium SAECO 4301007000 <| FILTER HOLDER GAGGIA/SAECO spout connection ø 3/8" - handle connection M10 wings 7 mm SAECO WGA8001059000 <| T 2 > SAECO 226551650 |> <| 2cups - black - brass SAECO 226550650 SAECO 226551850 1160001 <| T 2 > Filters < T 2 |> INLET PASS-THROUGH FILER 1160026 <| |> W ATER FILTER inlet and outlet ø 6 mm. 500 micron net SAECO 144650300 1160003 <| |> W ATER-DRAW ING FILER water-drawing tube ø 8 mm. 260 micron net SAECO SAECO 144650800 <| |> SAECO 224640200 <T1 T1> SAECO Suitable for: Suitable for: 1349093 <| T 2 > Fittings < T 2 |> ADJUSTABLE FITTING ø 1/8"M 1349014 <| |> BOILER FITTING ø 1/2"M -1/2"M for PTFE pipe ø 6 mm SAECO NR10.014 1349102 <| |> SAECO WGA8001010000 FITTING ø 1/4"M-1/4"M 1349112 <| SAECO WGA26G0070/01 1349094 <| |> 1349103 |> FITTING ø 1/8"M - 1/8"M NICHEL-PLATED BR 1349095 FITTING ø 3/8"M-3/8"M <| 1349706 |> 1349013 L-FITTING ø 3/8"M -3/8"M NICKEL-PLATED 1349710 <| SAECO WGANRC10/024 1201050 FITTING ø 1/8"M FOR PIPE ø 4 mm |> SAECO 9011.152 L-FITTING ø 1/8"M -1/8"M NICKEL-PLATED SAECO NR07.029 |> NICHEL PLATED L-FITTING ø 1/4"M -1/4"M SAECO WGANRC30/007 T 2 > Floats < T 2 <| |> SAECO 11008875 SAECO WGANRC11/001 <| FITTING ø 1/4"M-3/8"M SAECO WGANRC11/037 <| SAECO 11001481 <| |> |> M AGNETIC LEVEL FLOAT SAECO 145500859 SAECO 9161.112.150 1201020 <| |> SAECO 145501211 W ATER LEVEL FLOAT <T1 T1> SAECO Suitable for: Suitable for: 1411002 <| |> TURBINE ASSEM BLY SAECO 0311.A08 1455023 <| T 2 > Flowmeters < T 2 |> 1411003 <| SAECO 289433200 VOLUM ETRIC FLOW M ETER 937-1512/F09 |> SAECO 286473300 1455004 <| |> fittings ø 1/4"FF - nozzle ø 1.2 mm 1455056 |> VOLUM ETRIC FLOW M ETER 974-9522-B NSF 5060440 |> SAECO 12000781 T 2 > Fuses |> QUICK ACTING FUSE ø 6.3x32 mm - 10 PCS 3049034 <| |> 500V 3.15A 1186620 QUICK ACTING FUSE ø 6.3x32 mm - 10 PCS 500V 10A SAECO NE13.083 SAECO NE13.031 Gaskets and seals < T 2 <| VOLUM ETRIC FLOW M ETERS 932-9521-B90 NSF hose end fitting inlet/outlet ø 6 mm nozzle ø 1.2 mm SAECO NV99.100 < T 2 3049030 VOLUM ETRIC FLOW M ETER 974-9521-B NSF SAECO NV99.099 <| hose end fitting inlet/outlet ø 6 mm nozzle ø 1.8 mm <| SAECO 9160.039 inlet/outlet hose-end fitting ø 6 mm nozzle ø 1.2 mm SAECO NV99.033 <| VOLUM ETRIC FLOW M ETER |> COPPER FLAT GASKET ø 22x17x1.5 mm 1186848 <| |> FLAT EPDM GASKET external ø 14/12 mm - internal ø 7 mm for water tank valve SAECO UN1734-16O SAECO 11003671 T 2 > <T1 T1> SAECO Suitable for: 1186985 <| Suitable for: |> FLAT EPDM GASKET ø 15x6x6 m m 1186908 <| SAECO WGARB0709 5062673 <| |> GASKET FLAT FELT ø 45x39x4 mm |> SAECO 9181.352 5500622 <| |> for coffee grinders 1186983 |> GASKET FLAT VITON ø 15x7x3 m m GASKET FLAT PTFE ø 6x1.8x2 mm for steam tap SAECO 140360500 <| FLAT GASKET PTFE ø 12x10x2 mm SAECO 11003980 5058031 <| |> SAECO 145842664 GASKET LOW ER FOR COFFEE CONTAINER for water inlet tap SAECO WGA4001092000 1786147 <| |> GASKET M USHROOM / EPDM SAECO 145854462 1786231 <| |> for water/steam tap - ø 5/3 mm height 5 mm SAECO 11008104 1786230 <| |> GUARNIZIONE PIANA EPDM ø 24x15x3 mm for water inlet tap SAECO WGA4001094000 PTFE CONICAL SEAL ø 14.5x6.5x9 m m 1186404 <| |> PTFE FLAT GASKET ø 18x13x2 mm for water/steam tap SAECO WGARB0902 1786148 <| |> SHAPED GASKET FOR M IXER SAECO WGA4001077000 1186860 <| |> SHAPED V-RING for mixer motor pin SAECO 9111.025 SAECO NM05.015 <T1 T1> SAECO Suitable for: 1186859 <| Suitable for: |> SHAPED V-RING VS006 1192088 <| |> for mixer motor pin SAECO NM05.004 SAECO 9161.320 1186980 T 2 > Gaskets for coffee group < T 2 <| SILICONE MUSHROOM GASKET for coffee group |> COFFEE GROUP GASKET 73x61x1 mm |> <| free of asbestos SAECO WGA4001084000 Gaskets for coffee machine boiler < T 2 1186843 <| |> BOILER GASKET 1186845 <| |> T 2 > BOILER GASKET RED SILICONE silicone external ø 7/6 mm - height 8 mm SAECO 149450588 1240226 <| SAECO 145854259 T 2 > |> COUPLING FOR GEARM OTOR 1240086 <| |> for 4-column cup doser 1240089 |> GEARMOTOR MR140 24VDC 80rpm for solubles box scroll SAECO 11000640 <| SAECO 9011.129 Gearmotors < T 2 SAECO 9121.216.00P GEARMOTOR BITRON 230/240V 50Hz 85W for coffee unit SAECO 9120.060.00A <| |> <T1 T1> SAECO Suitable for: 1240079 <| Suitable for: |> GEARMOTOR G70C 24V 1240331 <| |> for stirrer and sugar dispenser D-shaft ø 6x5 mm SAECO 9121.107.00P 1240191 <| |> GEARMOTOR M R130 24V SAECO 9111.688.A20 1240088 <| |> for double spiral 1240096 |> GEARMOTOR 230V SAECO 186900752 1240060 <| |> for coffee grinder 1240093 |> JOINT FOR SOLUBLES GEAR M OTOR GEARMOTOR 24V SET PHASE for coffee group SAECO 9121.093.00A <| GEARMOTOR 220V 50/60Hz 90W 7.3 Rpm for coffee group SAECO 9121.192.00P <| GEAR M OTOR CAM external ø 56 mm for sugar dispenser gear motor SAECO 20000521 1240087 <| |> SAECO 9121.108.00P REDUCER FOR POW DERS DISPENSER M OTOR pin hole ø 6x5 mm - 4 teeth length 22 mm SAECO 9111.131 SAECO 9110.004.060 1212024 <| T 2 > Gears < T 2 |> GEAR ø 52 m m 38 TOOTH 1212017 <| overall height 15 mm SAECO 226000300 |> GEAR ø 52 m m 40 TEETH for spoons and sugar dispenser SAECO 9111.694 <T1 T1> SAECO Suitable for: 1212018 <| Suitable for: |> GEAR ø 52 m m 40 TEETH 1212015 <| |> for sugar gearmotor SAECO 9111.695 1212012 <| |> SAECO 146000759 GEAR ø 82 m m 108 TEETH 1212013 <| |> overall height 67 mm tooth height 5 mm SAECO 146000659 1212016 <| |> SAECO 9121.069 SAECO 9121.069.150 5033759 GEAR LOCKING RING 1212025 |> KIT GEARINGS FOR GEARM OTOR V2 GEARMOTOR KIT P124 SAECO 20000455 1212014 <| |> SCROLL GEAR for cups dispenser gear ø 15 mm - 10 teeth scroll ø 29 mm SAECO 20000900 SAECO 1813.072.A20 T 2 > Grinders < T 2 1251146 SAECO 9121068150 one gear ø 78 mm 77 teeth total height 68 mm one gear ø 60/16 mm 90/13 teeth total height 17 mm gearing ø 78 mm 77 teeth overall height 68 mm 1 gear ø 60/16 mm 90/13 theeth overall height 17 mm <| GEAR ø 82 m m 108 TEETH SAECO 9121.068.150 <| SAECO 1813.070.A20 |> SAECO 9121.042 overall height 67 mm tooth height 4.2 mm for cups dispenser <| GEAR ø 60/11 mm 90/12 TEETH height 18 mm |> CERAM IC GRINDING BURRS SAECO (PAIR) LEFT 1251098 <| |> external ø 48 mm - internal ø 28 mm thickness 6.5 mm SAECO 146520100 CONIC.GRIND.BURRS SAECO-GAGGIA (PAIR) RH external ø 47.8/31.7 mm - internal ø 28/10 mm thickness 20 mm SAECO 226473500 SAECO 9141.040 SAECO 226477700 SAECO 9141.039 <T1 T1> SAECO Suitable for: 1251007 <| Suitable for: |> GRINDING BURRS ARISTARCO-GAGGIA(PAIR) RH 1251173 <| |> external ø 84 mm - internal ø 45 mm thickness 9 mm - 3 mounting holes SAECO WGAMDB0248 1251099 <| |> GRINDING BURRS SAECO (PAIR) LEFT GRINDING BURRS PAIR SAECO/GAGGIA RH external ø 64 mm - internal ø 37 mm thickness 8.5 mm - 3 fixing holes SAECO 9141.072 SAECO 9141.072_2PZ |> <| external ø 43 mm - internal ø 25 mm thickness 6.5 mm - 3 fixing holes SAECO 126520119 Grinding burr holders < T 2 1251151 <| |> GRINDING BURRS BOTTOM HOLDER 1251152 <| |> ø 44 mm - central hole ø 7 mm 1251153 |> SAECO 149198350 SPACER SCREW FOR COFFEE GRINDER 1251154 <| SAECO 9141.001 1080151 |> SPACER SCREW FOR COFFEE GRINDER SAECO 9141.065 T 2 > Grounds boxes < T 2 <| GRINDING BURRS BOTTOM HOLDER external ø 56 mm - central hope ø 4 mm SAECO 9141.007 <| |> T 2 > COFFEE DREGS BLACK CONTAINER SAECO 142600550 5048171 <| |> SAECO 11003533 CONTAINER FOR COFFEE PUCK BLACK <T1 T1> SAECO Suitable for: 5049780 <| Suitable for: |> DARK GREY COFFEE W ASTE CONTAINER 1080114 <| |> maximum overall dimensions 180x120x200 mm SAECO 0312.032.710 1080118 <| |> SAECO 0312.032.380 GROUNDS BOX SILVER 1080135 <| |> dimensions 120x87x110 mm SAECO %0311.004.580 1189003 GROUNDS BOX SILVER dimensions 180x120x200 mm SAECO 0311.004.580 SAECO 0312.032.760 SAECO 0312.032.770 T 2 > Guides < T 2 <| GROUNDS BOX BLACK dimensions 180x120x200 mm |> BOTTLES SLIDEW AY |> <| length 460 mm - width 29 mm SAECO 9111.461.050 Handles for filterholder-portafilter < T 2 5047149 <| |> FILTER HOLDER KNOB 1141005 <| SAECO 4332037000 1755826 FILTER HOLDER KNOB M10 SAECO WGA8001061000 Heating elements < T 2 <| |> |> CARTRIDGE HEATING ELEM ENT 80W 240V cartridge ø 12x55 mm SAECO WGADM2125/01 T 2 > <| |> T 2 > <T1 T1> SAECO Suitable for: Suitable for: 1755103 <| T 2 > Heating elements < T 2 |> HEATING ELEM ENT 1000W 230V 1186458 <| |> RED SILICONE RING 03050 external ø 53 mm - height 70 mm - fittings M12 SAECO 9011.255.00A 1755130 <| |> HEATING ELEM ENT 1000W 230V SAECO NM01.015 SAECO 11000972 |> <| hidraulic circuit connections M8 SAECO 288140458 1755008 <| |> HEATING ELEM ENT 2500W 220/380V 1186584 <| |> immersed length 220 mm - 6 pole distance between fixing holes 51 mm with bulbholder sheathing - flange 68x68 mm SAECO ES9190.271.00A 1186635 <| |> TRIANGULAR GASKET FOR HEATING ELEM ENT SAECO 4027001000 1786006 <| |> universal carbo dimensions 70x70x2 mm - internal hole ø 40 mm 1755056 |> HEATING ELEM ENT 4000/4760W 220/240V immersed length 310 mm - 6 poles distance between the holes 52 mm with bulb sheath - flangia ø 67/58 mm SAECO 11003362 TRIANGULAR GASKET FOR HEATING ELEM ENT PTFE dimensions 70x70x2 mm - internal hole ø 40 mm SAECO 4027001000 <| TRIANGULAR GASKET FOR HEATING ELEM ENT free of asbestos dimensions 70x70x2 mm - internal hole ø 40 mm SAECO 4027001000 1186584 <| |> TRIANGULAR GASKET FOR HEATING ELEM ENT free of asbestos dimensions 70x70x2 mm - internal hole ø 40 mm SAECO 4027001000 <T1 T1> SAECO Suitable for: 1186635 <| Suitable for: |> TRIANGULAR GASKET FOR HEATING ELEM ENT 1786006 <| |> universal carbo dimensions 70x70x2 mm - internal hole ø 40 mm SAECO 4027001000 1755270 <| |> SAECO 4027001000 HEATING ELEM ENT 5465W 230V 1186584 <| |> immersed length 400 mm - 6 poles distance between mounting holes 52 mm with bulb sheath - flange 68x68 mm for GAGGIA GE-GD-XE-XD 1186635 |> SAECO 4027001000 TRIANGULAR GASKET FOR HEATING ELEM ENT 1786006 <| |> universal carbo dimensions 70x70x2 mm - internal hole ø 40 mm 5501288 |> TRIANGULAR GASKET FOR HEATING ELEM ENT PTFE dimensions 70x70x2 mm - internal hole ø 40 mm SAECO 4027001000 <| TRIANGULAR GASKET FOR HEATING ELEM ENT free of asbestos dimensions 70x70x2 mm - internal hole ø 40 mm SAECO 11003363 <| TRIANGULAR GASKET FOR HEATING ELEM ENT PTFE dimensions 70x70x2 mm - internal hole ø 40 mm SAECO 4027001000 HEATING ELEM ENT 900W 230V |> <| immersed length 56 mm - 2 poles ø 52 mm - connections M12 SAECO 188150158 SAECO 188150358 Hose-end fittings < T 2 1315007 <| |> CONNECTION HOSE-END FITTING 1315006 <| for hot water pipe SAECO 11000294 |> HOSE-END FITTING F/SOLENOID VALVE CONNEC hose-end fitting ø 8 mm SAECO 9991.006 T 2 > <T1 T1> SAECO Suitable for: 1315003 <| Suitable for: |> INJECTOR HOSE-END FITTING BROW N 1315008 <| |> T-SHAPED HOSE END FITTING ø 8 mm hose-end fitting ø 7 mm - injector hole ø 3 mm length 54 mm SAECO 9111.335 SAECO 9111.335.060 SAECO 147920300 1449500 <| |> PTFE PIPE ø 2x4 mm - 10 m 1449502 <| |> alimentary 1449136 |> PTFE PIPE ø 4x6 mm - 10 m alimentary SAECO 149400200 <| T 2 > Hydraulic piping < T 2 SAECO 149400100 PVC HOSE ø 20x16 mm LENGTH 115 m m 1449679 <| |> for sugar drop SAECO 9971.015 SILICONE HOSE ø 3,5x6 SHORE 60 - 10 mt alimentary SAECO 9974.030 SAECO 149360400 SAECO 9972.045 SAECO 9972.056 SAECO 9972.206 1449279 <| |> SILICONE HOSE ø 3,5x6 SHORE 60 - 100 m 1449689 <| |> alimentary SAECO 149360400 1449289 <| |> SAECO 9972.056 SAECO 9972.206 SILICONE HOSE ø 10x13 SHORE 60 - 100 m SAECO 1449683 <| alimentary SAECO SILICONE HOSE ø 10x13 SHORE 60 - 10 m alimentary |> SILICONE HOSE ø 5x10 SHORE 60 - 10 m alimentary SAECO JS01.022 SAECO WGADM2106/015 <T1 T1> SAECO Suitable for: 1449283 <| Suitable for: |> SILICONE HOSE ø 5x10 SHORE 60 - 100 m 1449682 <| |> alimentary SAECO JS01.022 1449282 <| |> SILICONE HOSE ø 5x8 SHORE 60 - 10 m alimentary SAECO WGADM2106/015 SAECO 149360200 SILICONE HOSE ø 5x8 SHORE 60 - 100 m 1449510 <| |> SAECO 9972.022 W IRE HOSE ø 8.2x4.2 mm SH60 - 5 m alimentary SAECO 149360200 SAECO 16000380 3221407 <| |> RED INDICATOR LAM P 250V 1221023 <| |> max temperature 120°C mounting hole ø 25 mm SAECO WGA5001012000 5025958 RED INDICATOR LIGHT ø 8 mm flush mounting with fastening plate SAECO WGA5001010000 T 2 > Inlet hoses < T 2 <| T 2 > Indicator lights < T 2 |> HOSE FLEX ø 1/4" Fc x Fc 500 mm |> <| SAECO WGADM1608 Ironmongery (screws,nuts,washers) < T 2 1528001 <| |> COUNTERSUNK FLAT HEAD SCREW S M 4x10 slotted - stainless steel UNI 6109 - DIN 963 - ISO 2009 SAECO WGAUNI6107-4X10I 1528501 <| |> COUNTERSUNK HEAD SCREW S W ITH SHELLM5x12 cross recessed - stainless steel UNI 7689 - DIN 966 - ISO 7047 SAECO DI7987-5X8I T 2 > <T1 T1> SAECO Suitable for: 5055105 <| Suitable for: |> CYLINDER HEAD SCREW M4x10 1528100 <| |> stainless steel - cross recessed UNI 7687 - DIN 7985 - ISO 7045 SAECO WGADI7986-4X10Z 5017690 <| |> SAECO WGADI7986-4X10I CYLINDER HEAD SCREW M4x16 5020972 <| |> stainless steel - cross recessed UNI 7687 - DIN 7985 - ISO 7045 1528084 |> SAECO 129825502 CYLINDER HEAD SCREW M8x25 1528136 <| |> stainless steel - with hexagon socket UNI 5931 - DIN 912 - ISO 4762 1528622 |> SAECO WGA4001075000 HEXAGON HEAD SCREW M 8x16 3528213 <| |> stainless steel - UNI 5739 - DIN 933 - ISO 4017 SAECO UN5931-8X16Z 1184006 <| |> stainless steel - with hexagon socket UNI 9327 - DIN 7984 HEXAGONAL NUT M ID M 5 st./steel - UNI 5588 - DIN 934 - ISO 4032 SAECO WGADI6921-8X16Z LOW CYLINDER HEAD SCREW M 4x12 SAECO WGAUN5931-4X12I GLASS FASTENING NUT ø 1/2"F HOLE 13 mm nut height 14 mm - nut 23 mm SAECO WGAUN5931-8X25I <| CYLINDER HEAD SCREW M4x25 stainless steel - cross recessed UNI 7687 - DIN 7985 - ISO 7045 SAECO U043.004 <| CYLINDER HEAD SCREW M4x12 stainless steel - cross cut UNI 7687 - DIN 7985 - ISO 7045 SAECO U302.001 1184010 <| |> LOW CYLINDER HEAD SCREW M 6x10 stainless steel - with hexagon socket UNI 9327 - DIN 7984 SAECO WGAUN5931-6X10I <T1 T1> SAECO Suitable for: 1348036 <| Suitable for: |> NUT ø 3/8" W RENCH 21x6mm 1528128 <| |> SCREW M3.5x8 mm for motor mixer fastening SAECO WGAND01/005 5018567 <| |> SELF-TAPPING SCREW ø 2.9x9.5 mm SAECO 255046 1186399 <| |> stainless steel - cylinder head cross recessed - C type end UNI 6954 - DIN 7981 - ISO 7049 SAECO 129512503 1528008 <| |> W ASHER FLAT M 8 W ASHER FLAT M 16 internal/external ø 17/30 mm - thickness 3 mm in zinc plated iron alloy UNI 6592 - DIN 125 A - ISO 7089 SAECO WGAUN6592-17Z |> <| internal/external ø 8.4/16 mm - thickness 1.6 mm in zinc plated iron alloy UNI 6592 - DIN 125 A - ISO 7089 SAECO WGAUN6592-8Z 5049137 <| |> KNOB GRINDING SETTING <| 1241417 STEAM TAP HANDLE <| SAECO 11003785 1241153 <| T 2 > Knobs < T 2 |> |> STEAM SILK SCREEN PRINT. F. HANDLE SAECO WGADM0794/003 SAECO 227720953 1241124 |> SAECO 227720753 SAECO 1034.104 STEAM TAP KNOB <T1 T1> SAECO Suitable for: 1241125 <| Suitable for: |> W ATER/STEAM TAP KNOB 5027276 <| |> W ATER/STEAM TAP KNOB hole for square pin 7x7 mm SAECO 11004374 SAECO WGA8001028000 Labels for control panels < T 2 1399001 <| |> CONTROL PLATE <| SAECO 1034.147.050 T 2 > |> SAECO 11008740 1520400 <| T 2 > Level gauges < T 2 |> LEVEL GLASS ø 12x106 mm SILK-SCREEN PRIN <| |> SAECO WGA4001060000 Level regulators < T 2 1341042 <| |> LEVEL ADJUSTER RL30/1E/2C/F 230V <| T 2 > |> 230/240V 50/60Hz 5A SAECO WGADM1940 1341016 <| T 2 > Level sensors < T 2 |> LEVEL PROBE ø 1/4"M -123 mm SAECO WGADM1935 <| |> <T1 T1> SAECO Suitable for: Suitable for: 1225039 <| T 2 > Levers < T 2 |> DISPENSER LEVER |> <| SAECO WGAMDB0346 1186840 <| T 2 > Lip seals < T 2 |> LIP GASKET ø 29x12x10 mm 1186700 <| |> LIP SEAL ø 23x15x6 mm for water container SAECO 145841350 SAECO NM05.006 1388004 <| SAECO NM05.013 |> DOOR LOCK M ERONI SAECO 145842900 T 2 > Locks < T 2 |> <| SAECO NV02.249 1180002 <| T 2 > Lubricants < T 2 |> GREASE LUBRICANT 5 g |> <| for superautomatic coffee machines NSF CERTIFIED SAECO 11005044 SAECO 11022867 1240083 <| SAECO 421946017941 T 2 > Microswitches < T 2 |> LEVER FOR GLASSES SENSOR M ICRO SAECO 1813.067.A20 1240195 <| SAECO 0301.811 |> M AGNETIC M ICROSW ITCH <T1 T1> SAECO Suitable for: 1240073 <| Suitable for: |> M ICROSW ITCH 0.1A 250V 1240085 <| |> M ICROSW ITCH 0.1A 30V for multiways motorized valve SAECO NE05.001 1240387 <| |> SAECO NE05.058 M ICROSW ITCH 0.3(0.1)A 30V SAECO 12000066 1240209 <| |> M ICROSW ITCH 0.3A 30V for gear SAECO 11008868 1240401 <| |> SAECO NE05.017 M ICROSW ITCH 0.3A 30V <| 3240406 M ICROSW ITCH 10A 250V <| SAECO NE05.038 1240230 <| |> |> M ICROSW ITCH 10(4)A 250V SAECO NE05.052 3240123 |> M ICROSW ITCH 16A 250V for jets support motion SAECO NE05.059 SAECO NE05.010 SAECO 186701500 1240307 <| |> M ICROSW ITCH 230V for coffee group gearmotor SAECO NE05.009 <| |> SAECO WGADM0754 SAECO 186701200 <T1 T1> SAECO Suitable for: Suitable for: 1240211 <| |> COFFEE GRINDER M OTOR 230VDC SAECO 286851858 5037528 <| T 2 > Motors < T 2 |> 5030350 <| SAECO 9141.075.00A |> COFFEE GRINDER M OTOR 230VDC SAECO 11000513 COM PLETE MOTOR M IXER 24VDC 7102191 <| |> GEARMOTOR FOR BREW GROUP for mixer SAECO 9110.026.06P 1240080 <| |> SAECO 9110.160.06P SAECO 9121.111.00P KENTA M OTOR PIN SAECO 11003037 1240092 <| |> SAECO 11005214 M OTOR FOR MOBILE TRAY length 52 mm for spoons and sugar dispenser for solubles box scroll SAECO 9111.586.050 1240078 <| |> M OTOR LH 230V FOR COFFEE GRINDER SAECO 12000065 1240084 <| |> M OTOR M IXER M KG2253 230V D-shaft ø 6x4.6 mm SAECO 20000202 1240082 <| |> SAECO 9121.117.00A M OTOR M IXER SUPPORT FOR M IXER SAECO 9111.231.270 1240077 <| |> M OTOR W ITH CUPS ARM SAECO 9110.034.00P SAECO 186851058 <T1 T1> SAECO Suitable for: 1252602 <| Suitable for: |> M OTOR 220V FOR COFFEE GRINDER 1240090 <| |> M OTOR 230V ø 52 m m FOR M IXER for mixer D60 SAECO 0301.R01.00A 5044861 <| |> SAECO 0301.R10.00A M OTOR 24VDC FOR M IXER SAECO 9121.056.00A 1240368 <| |> D-shaft ø 4x3 mm SAECO 9121.248.00P 1240091 <| |> SAECO WGA5001017000 UPPER SCROLL FOR DRAFT TUBE SAECO 9111.072 1720003 |> <| SAECO 9111.072.060 Non-return and expansion valves < T 2 <| |> CHECK VALVE 1523068 <| |> for water inlet tap 1523052 |> EXPANSION VALVE ø 1/4"M 16 bar CHECK VALVE ø 1/8"M -1/8"M conical fitting SAECO WGA8001072000 <| RPM CLAM P MOTOR 165W model 11062503 power 165W 230V 1.3A 50/60Hz capacitor 8 µf with volumetric pump SAECO WGA5001015000 1523432 <| |> EXPANSION VALVE ø 1/8"M 11 Bar for boiler vibratory pump SAECO 229452100 SAECO WGA5001014000 T 2 > <T1 T1> SAECO Suitable for: 1523035 <| Suitable for: |> NON-RETURN VALVE ø 1/4"M -1/4"F 1523700 <| SAECO WGADM1232/001 5048106 NON-RETURN VALVE ø 1/8"M -1/8"M SAECO NR15.006 Nozzles for coffee groups < T 2 <| |> |> GROUP DIFFUSER M 13x1.5 T 2 > |> <| SAECO EF0047/A OR and ORM gaskets < T 2 1186365 <| |> "O" RING 02012 EPDM SAECO 12000890 1186867 <| |> SAECO 12001614 1186480 <| SAECO 140326561 GASKET O-RING 0060-20 SILICONE RED |> SAECO 140322061 1786028 <| |> for steam pipe DELONGHI machines for water-inlet valve SAECO/GAGGIA 1186842 |> SAECO 12000893 GASKET O-RING 02012 VITON GREEN <| 1186885 O-RING EPDM R5 <| SAECO 12000541 1186854 <| |> SAECO NM02.006 GASKET O-RING 0120-20 EPD M for water/steam tap SAECO 140324459 <| EPDM O RING 04112 |> GASKET ORM 0090-20 EPDM SAECO NM02.012 1186855 |> SAECO 12000414 O-RING GASKET M 0030-15 EPDM T 2 > <T1 T1> SAECO Suitable for: 1186675 <| Suitable for: |> O-RING GASKET M 0080-15 EPDM SAECO NM02.013 1186857 <| |> 1186647 <| SAECO 140324961 SAECO NM01.035 O-RING ORM 0320-25 NBR <| 1186856 O-RING R3 EPD M <| SAECO NM03.012 1186996 <| |> 1186864 |> 1186709 |> 1186252 1186707 <| SAECO 140320662 1186163 |> SAECO NM03.015 O-RING ORM 0380-40 RED SILICONE |> O-RING 0040-20 EPDM O-RING 0115 VITON |> O-RING 0108 VITON SAECO 12000042 1186858 <| SAECO WGADM0041/106 <| SAECO 140320762 SAECO 140326661 O-RING 0106 RED SILICONE SAECO NM01.028 <| |> O-RING M 0090-20 RED SILICONE SAECO 140329262 SAECO 140328561 <| |> |> O-RING 0176 RED SILICONE SAECO 140322962 O-RING 02010 EPD M SAECO NM03.015.NBR 1186846 <| |> SAECO NM01.002 O-RING 02012 RED SILICONE SAECO 140326562 <T1 T1> SAECO Suitable for: 1186014 <| Suitable for: |> O-RING 02015 EPD M SAECO NM02.028 1186900 <| |> SAECO 140328061 O-RING 02015 VITON 1186514 <| SAECO 140328161 1186755 |> O-RING 02018 VITON O-RING 02015 SILICON SAECO %NM01.050 1186861 <| SAECO WGADM0041/032 <| |> |> SAECO NM01.003 1186901 <| SAECO WGADM0041/031 |> SAECO NM01.058 SAECO NM01.050 SAECO 140328059 O-RING 02018 RED SILICONE SAECO 140321462 O-RING 02031 - RED SILICON SAECO 140320462 SAECO 140321962 SAECO 140324062 5008673 <| |> O-RING 02043 SILICONE 1186366 <| SAECO 140323062 1786232 <| |> O-RING 02062 BROW N VITON SAECO NM01.021 5008687 <| SAECO WGADM0041/107 1186373 <| |> O-RING 02081 BLACK SILICONE SAECO 140322462 |> |> O-RING 02050 RED SILICONE SAECO 140322262 O-RING 02075 SILICONE SAECO NM01.006 1186863 <| |> SAECO NM01.022 O-RING 02106 RED SILICONE SAECO 140324559 SAECO 140324562 <T1 T1> SAECO Suitable for: 1186850 <| Suitable for: |> O-RING 03068 RED SILICONE <| 1186026 O-RING 03212 RED SILICONE <| SAECO NM01.016 1186847 <| |> 1786150 |> O-RING 03081 RED SILICONE SAECO NM01.040 1186435 SAECO 140325962 <| |> |> O-RING 106 VITON SAECO NM04.002 ORM GASKET 0055-15 EPDM 5008675 <| |> ORM GASKET 0060-30 BLACK SILICONE for coffee assembly sleeve SAECO NM02.017 1786149 <| |> SAECO NM02.004 1186862 <| |> SAECO 140324362 ORM GASKET 0080-20 EPDM 1786111 <| SAECO NM02.029 ORM GASKET 0320-40 SILICONE |> ORM GASKET 0080-20 TERM OIL SAECO 140320461 1786074 <| |> ORM 0090-25 EPDM for coffee group piston SAECO NM01.044 1186868 <| |> SAECO NM04.010 SAECO 140325062 ORM -GASKET 0730-40 GREEN VITON SAECO NM02.018 1186457 <| |> SAECO 140321262 RED SILICONE O RING 0177 <T1 T1> SAECO Suitable for: 1186852 <| Suitable for: |> RED SILICONE O-RING ORM 0080-20 SAECO NM01.008 SAECO 140320459 1225038 |> 0-RING 02037 RED SILICONE SAECO 140322162 T 2 > Pawls for coffee grinder dosers < T 2 <| 1786087 <| |> RATCHET 6 TEETH |> <| SAECO WGAMDB0286 1324131 <| T 2 > Pins < T 2 |> INCREM ENT PIN 1324125 <| |> LEVER GUIDE PIN for coffee grinder SAECO 147470763 1324159 <| |> SAECO WGAMDB0291 PIN ø 5x20.5 mm 5069081 <| |> PIN FOR ADJUSTER for water inlet tap lever SAECO WGARB0844 1324902 <| |> SAECO 11013531 PIN FOR VALVE 1324911 <| |> PISTON ASSEMBLY for boiler valve for steam tap SAECO 147471700 SAECO 9011.100 SAECO 11009019 SAECO 9019.A01 SAECO 227660100 SAECO 227660103 <T1 T1> SAECO Suitable for: 5014767 <| Suitable for: |> PISTON ASSEMBLY 1348082 <| |> STEAM TAP PIN for steam tap SAECO 11009018 SAECO 11024785 SAECO 227660303 SAECO 120642220 SAECO 9019.A04 1348078 <| |> STEAM TAP PISTON SAECO 11001485 5038097 <| |> 1324089 <| SAECO 128870420 1324901 |> SAECO 11009013 STEAM TAP SPIND LE SAECO WGARB0610/02 TAP SHUTTER CONTROL PIN 1324400 <| SAECO WGARB0711 <| |> |> TAP SPINDLE SAECO WGARB0866/A VALVE PIN 1324158 <| SAECO 127471620 SAECO 227480203 |> W ATER/STEAM TAP PIN SAECO WGARB0710 SAECO 9011.075 Pipes for coffee machines < T 2 1449131 <| |> PRESSURE SW ITCH BOILER PIPE pipe ø 2x4 mm - length 200 mm SAECO 9979.B30 <| |> T 2 > <T1 T1> SAECO Suitable for: Suitable for: Pressure gauges < T 2 1245801 <| |> BOILER-PUM P PRESSURE GAUGE ø 63 mm T 2 > |> <| double scale 0÷2.5/0÷16 bar - connections ø 1/8"M rim ø 70 mm - body ø 63 mm SAECO WGA5001018000 Pressure switches < T 2 1320531 <| |> PRESSURE SW ITCH P302/6 3-POLES 30A T 2 > |> <| CE-SEV-ASE-UL approved ISO 228 G connection 1/4"M for pipe ø 4x6 mm adjustable scale 0.5÷1.4 bar fixed differential 0.15 (± 0.06) bar fluid temperature max :140°C max contact load : 220V 7KW (30A) 400V 12KW (30A) SAECO WGADM0541 SAECO 12001274 1397003 <| |> BOILER TEM PERATURE PROBE 1397004 <| SAECO 288582200 1397005 <| |> 1397007 |> |> BOILER TEM PERATURE PROBE SAECO 11000075 BOILER TEM PERATURE PROBE <| 1397006 BOILER TEM PERATURE PROBE 230V <| SAECO 11000316 <| T 2 > Probes < T 2 |> BOILER TEM PERATURE PROBE NTC SAECO 12000081 SAECO 286472258 1397008 SAECO 2059.000 |> DISPENSING DETECTORS KIT <T1 T1> SAECO Suitable for: 5036417 <| Suitable for: |> PROBE TEM PERATURE NTC BOILER 1397011 <| |> TEMPERATURE PROBE bulb ø 4x10 mm SAECO 190800100 SAECO NE13.066 Rotary switches < T 2 1057027 <| |> SELECTOR SW ITCH 0-1 POSITIONS 16A 400V 3057296 <| |> square pin 5x5 mm SAECO DM0755/002 1189002 <| SELECTOR SW ITCH 0-3 POSITIONS 32A 690V square pin 5x5 mm SAECO WGADM0755/001 SAECO WGADM1944 Rubberpieces for steam-water taps < T 2 |> T 2 > BURN PREVENTING HANDGRIP 1186849 <| |> T 2 > BURN PREVENTING PIPE HANDGRIP ø 10 mm for hot water pipe SAECO 11000596 5500789 <| |> SAECO 11001625 BURN PREVENTING RUBBERPIECE FOR PIPES SAECO 9161.055.710 SAECO 9161.055.760 1719001 T 2 > Scrolls < T 2 <| |> <| |> DOUBLE BOX SCROLL external ø 19 mm - total length 141 mm SAECO 9111.701 1189004 <| |> GUIDE SPIRAL ø 65 mm P45 RH CHROM E-PLATE length 485 mm SAECO 9111.281.940 <T1 T1> SAECO Suitable for: 1719002 <| Suitable for: |> SUGAR BOX SCROLL |> <| external ø 19 mm - total length 116 mm SAECO 9111.726 Seals for level glasses < T 2 1186226 <| |> FLAT EPDM GASKET T 2 > |> <| for level glass external ø 17.2/13 mm - internal ø 11 mm height 9/4 mm SAECO WGA4001076000 Shower screens for brew group < T 2 1081039 <| |> SHOW ER SCREEN ø 34 mm 1081028 <| SAECO 324000200 1081059 <| |> SHOW ER SCREEN ø 35.8 mm 5033942 |> SHOW ER SCREEN ø 48.8 mm SAECO 123740221 SHOW ER SCREEN ø 35.5 mm |> SHOW ER SCREEN ø 38 mm |> SHOW ER SCREEN ø 49 mm SAECO 9161.167 1081086 <| SAECO 223740300 <| |> SAECO 9161.037 1081058 <| SAECO 123741421 T 2 > <T1 T1> SAECO Suitable for: 1081021 <| Suitable for: |> SHOW ER SCREEN ø 55 mm 1081025 <| SAECO WGADM0269 1086509 SPOUT ø 34 mm SAECO 324000100 SAECO 9161.036 Showerholder diffusers < T 2 <| |> |> SHOW ER HOLDER DIFFUSER 1086035 <| |> T 2 > SHOW ER HOLDER PISTON ø 39.5 mm external ø 57 mm - height 14 mm - hole M5 SAECO WGA16G1002 5061494 <| SAECO 9161.306.150 Solenoid valves < T 2 |> COIL FOR DRAIN SOLENOID VALVE 230V <| 1120024 CONNECTOR FOR DRAIN VALVE <| SAECO 20000590 5032429 <| |> |> COIL M &M 22V0 24V 10W SAECO 0862.R07 5036415 |> DRAIN SOLENOID VALVE P0049 230V 50/60Hz 11.1VA SAECO 20000592 5032428 <| |> SAECO 11001543 HOUSING FOR DRAIN SOLENOID VALVE P0049 <| 1120013 M ULTIW AYS M OTORIZED VALVE KIT <| SAECO 20000591 1120030 <| |> SAECO 20000480 |> M ULTIW AYS M OTORIZED VALVE KIT SAECO 20000827 1240094 |> POW D ER REDUCER COIL 230V 50Hz SAECO 9129.A12.00A T 2 > <T1 T1> SAECO Suitable for: 1120022 <| Suitable for: |> SOLENOID VALVE CORE <| 1120020 SOLENOID VALVE OLAB 3 W AYS ø 1/8"F 24V <| SAECO 0875.R11 1120107 <| |> |> SOLENOID VALVE CORE D9 SAECO 0862.R16 |> coil 6000BH/B0DN 24V 10W SAECO 11023754 1120028 <| |> SAECO 9121.145.00P 2 SOLENOID VALVES UNIT ODE ø 1/8" 230V 1120122 <| |> 2 ways - 5W 230V 50Hz - orifice ø 1.2 mm COIL OD E LBA05230AS 230V 5W 50/60Hz width 22 mm - height 29.5 mm depth 27.5 mm SAECO 9121.221.00A 1120018 <| |> 2 SOLENOID VALVES UNIT OLAB ø 1/8" 24V 5030343 <| |> 3 ways - 10W 24V SAECO 11007165 1120354 <| |> SAECO 11026112 2-W AY SOLENOID VALVE PARKER 230V 50/60Hz VE146NV - fittings ø 1/4"FF - max 10 bar VITON sealing - orifice ø 2.5 mm with coil ZB09 9W 220/230V 50/60Hz fluid temperature -10°C +140°C SAECO WGADM2115 2-W AY SOLENOID VALVE OLAB ø 1/8"FF 230V coil 6000BH/K5FV 230V 50Hz 9/12.5VA SAECO 11008828 3120032 <| |> SAECO 9121.080.00A SAECO 912108000A COIL PARKER ZB09 9W 220/240V 50/60Hz width 34 mm - height 33 mm depth 43 mm <T1 T1> SAECO Suitable for: 1120026 <| Suitable for: |> 2-W AYS SOLENOID VALVE OLAB 230V 50Hz 1120027 <| |> for boiler SAECO 9121.036.00A 1120335 <| |> 3 SOLENOID VALVES UNIT ODE ø 1/8" 24V 2 ways - 5W 24V - orifice ø 1 mm SAECO 9121.134 3-W AY SOLENOID VALVE PARKER 230V 50/60Hz 3120032 <| SAECO 9121.134.00P |> VE128IR - drain ø 1/8" conical - max 10 bar RUBY seal - orifice ø 1.3 mm with coil ZB09 9W 220/230V 50/60Hz fluid temperature -30°C+140°C COIL PARKER ZB09 9W 220/240V 50/60Hz width 34 mm - height 33 mm depth 43 mm SAECO WGADM0647 1120339 <| |> 3-W AY M ECHANICAL COM PONENT PARKER |> <| VE128IR - drain ø 1/8" conical - max 10 bar RUBY seal - orifice ø 1.3 mm fluid temperature -30°C+140°C 1120019 <| |> 4 SOLENOID VALVES UNIT ODE ø 1/8" 24V 1120011 <| |> 2 ways - 5W 24V - orifice ø 1.1 mm SAECO 9121.195.00P 5023944 SAECO 11009225 SAECO 11011470 T 2 > Spouts for coffee < T 2 <| 4 SOLENOID VALVES UNIT OLAB ø 1/8" 24V 3 vie - 10W 24VDC |> BLACK COFFEE SPOUT SAECO 223700550 5500638 <| |> COFFEE SPOUT SAECO 0311.023.150 SAECO 11006983 <T1 T1> SAECO Suitable for: 1022015 <| Suitable for: |> COFFEE SPOUT COVER 1022524 <| SAECO 222824108 1022010 <| |> 1022057 |> GREY FIXED SPOUT 1022056 1022011 |> SPOUT ASSEM BLY BLUE 1022017 1022012 |> SPOUT ASSY GREY 1022503 |> |> SPOUT ASSY BLACK 1022014 |> 1022058 <| SAECO 311011380 STRAIGHT SINGLE SPOUT ø 3/8" |> SAECO 421944044201 SPOUT CHANNEL SAECO 0311.022.380 1022079 <| |> SUPPORT FOR DELIVERY SPOUTS 6 positions SAECO WGA26G0112 SAECO 421944044181 SPOUT ASSY GREY SAECO 0347.A03.710 SPOUT BLACK SAECO 0311.011.380 <| GREY SPOUT ASSEM BLY SAECO 0327.A07.050 <| SAECO 0360.A03.710 <| |> SAECO 0327.A07.680 <| SAECO 0327.A07.760 <| DOUBLE SPOUT ø 3/8" SAECO WGA6301004010 <| SAECO 0327.010.680 <| |> SAECO 0862.008.050 <T1 T1> SAECO Suitable for: Suitable for: 1250237 <| T 2 > Springs < T 2 |> CONICAL SPRING ø 7/4x35 m m 1250258 <| |> DOSER LEVER RETURN SPRING for piston block group grey SAECO 9161.222 1250241 <| |> SAECO WGAMDB0292 FORK SPRING FOR PIPE ø 4 m m <| 5071472 HOPPER SPRING <| SAECO 9011.144 1250240 <| |> |> SAECO NF11.084 1250239 |> for SAECO ATLANTE-3P-5P-COMBISNACK-SG200E-FS400 QUARZO500-QUARZO700-CRISTALLO600-CRISTALLO400 AMBRA-PHEDRA 1250534 |> SAECO 11001693 SPRING ø 12x22 mm 1250536 <| SAECO WGARB0882 5032303 <| |> SPRING ø 3.5x20 mm FOR D OSER FLAP |> SPRING ø 13x42 mm SAECO WGA40010890 1250238 <| |> for SAECO 3P-5P-7P-8P-AMBRA-COMBISNACK-GROUP500 SG500-QUARZO500-QUARZO700NE-QUARZO700NM-RUBINO200 SG200E-SG700 SAECO 9161.005 PUSH-BUTTON SPRING for coffee hopper release SAECO 9161.425 <| FORKSPRING INTERNAL ø 11 mm SPRING ø 4x21 mm for COFFEE MACHINES steam needle tap for VENDING needle holder / boiler SAECO 126765317 SAECO 9011.007 <T1 T1> SAECO Suitable for: 1250901 <| Suitable for: |> SPRING ø 4x29 mm 5031970 <| |> for boiler needle valve SAECO 9011.132 1250236 <| |> SAECO 126761518 SPRING ø 9x21 mm TAP PIPE 1250259 <| SAECO 11000759 1343077 |> PLATE SCRAP SEPARATOR 1343078 <| SAECO WGAMDB0240 1348600 1348085 1439026 |> TOP STAR Steam taps and spares for coffee mach. |> COM PLETE STEAM TAP |> 1348083 <| |> 1348091 <| SAECO 11003733 STEAM TAP EXTENSION SAECO WGARB0721 |> STEAM TAP SAECO 228455200 STEAM TAP SAECO 0345.R05 <| T 2 > SAECO WGAMDB0215 SAECO WGA8001027000 <| STAR SPRING Stars and spare parts < T 2 <| |> SAECO WGAMDB0256 < T 2 <| SPRING ø 7x21 mm for mushroom valve |> SAECO 9161.204 1348080 <| SAECO 9161.057 STEAM TAP SAECO 9161.204.G |> STEAM TAP PIN T 2 > <T1 T1> SAECO Suitable for: 1348093 <| Suitable for: |> STEAM TAP PIN <| 1348097 STEAM TAP W ITH SUPPORT <| SAECO 0327.014 1348099 <| |> 1348101 |> SAECO 226480900 5052727 SAECO 226482000 W ATER/STEAM TAP SAECO 11001549 SAECO 11004135 SAECO 11004625 SAECO 11008698 SAECO 11025775 |> BALL COUPLING STEAM PIPE 5501266 5500801 |> 1449132 T 2 > |> SAECO 11001621 |> BLACK PLASTIC STEAM SPRINKLER SAECO 147430150 M ETAL STEAM SPRINKLER 1449133 <| SAECO 227430550 <| |> <| SAECO 4332049000 <| TAP W ATER/STEAM V2 Steam-water pipes coffee machines < T 2 1449174 |> SAECO 11012381 <| SAECO 11001545 <| STEAM TAP PIN SAECO 9161.205 SAECO 20007014 <| |> |> NOOZLE FOR STEAM PIPE SAECO 11001620 NOZZLE FOR STEAM OUTLET SAECO 11011504 1449134 <| |> SAECO 147430100 SAECO 9990.002 NOZZLE FOR STEAM OUTLET M ADE OF PLASTIC SAECO 147430163 SAECO 9990.001 <T1 T1> SAECO Suitable for: 1449125 <| Suitable for: |> NOZZLE FOR W ATER/STEAM PIPE 1449129 <| SAECO 142271350 1549021 <| |> |> SAECO 11000593 PIPE STEAM COMPLETE ø 10 mm 5047887 <| |> pipe length 275 mm SAECO WGA8003013000 5047884 <| |> NOZZLE FOR W ATERPIPE SAECO WGA8003013010 STAINLESS STEEL STEAM SPRINKLER PLASTIC PANNARELLO length 83 mm for GAGGIA CLASSIC-ESPRESSO-ESPRESSODELUXE-NEWBABY EVOLUTION-COFFEE97-TS SAECO 11011247 SAECO 8301006000 1449317 <| |> W ATER PIPE NOZZLE length 82 mm SAECO 227431321 1319377 <| SAECO WGA5001005000 T 2 > Switches < T 2 |> BIPOLAR SW ITCH 16A 250V 1319542 <| |> with indicator light SAECO 5332003000 1319376 <| |> BLACK BIPOLAR SW ITCH 16A 250V SAECO WGA5001001000 1319382 <| |> silk-screen printing "on-off" hole ø 20 mm SAECO 5332004000 BIPOLAR SW ITCH 16A 250V square pin 6x6 mm - button block 13x19 mm for coffee delivery BLACK BIPOLAR SW ITCH 16A 250V silk-screen printing "0-1" mounting hole 13x27 mm SAECO NE03.038 <T1 T1> SAECO Suitable for: 1319274 <| Suitable for: |> BLACK THREE-POLE PUSH-BUTTON 16A 250V 1319276 <| |> BROW N SELECTION PUSH-BUTTON 16(4)A 250V - mounting hole 22x30 mm SAECO 183650750 1319578 <| |> CHROM E-PLATED PUSH-BUTTON SAECO 9111.036 1319278 <| |> PUSH-BUTTON PANEL M EM BRANE dimentions 335x255 mm SAECO WGA6003016000 1399002 <| |> PUSH-BUTTON PANEL M EM BRANE SAECO 11001810 1319273 <| |> PUSH-BUTTON PANEL M EM BRANE 5 BUTTONS dimentions 335x255 mm SAECO 0870.642 1319528 <| |> SAECO 11003223 PUSH-BUTTON PANEL 5 BUTTONS 1319279 <| |> PUSH-BUTTON PANEL 5 BUTTONS W ITH DISPLAY size 170x105 mm SAECO WGA8003007000 1319562 <| |> PUSH-BUTTON SUPPORT SAECO WGA4001080000 SAECO 0721.801 <| SAECO 0721.822 |> <T1 T1> SAECO Suitable for: 3319948 <| Suitable for: |> RED BIPOLAR SW ITCH 16A 250V 3319151 <| |> 16(4)A 250V - with indicator light max temperature 120°C mounting hole ø 25 mm SW ITCH PROTECTION CAP ø external 34 mm for push-buttons with mounting hole ø 25 mm SAECO WGADM2104 1319547 <| |> SINGLE-POLE PUSH-BUTTON 16A 250V 1319544 <| |> square pin 6x6 mm - button block 13x19 mm for coffee delivery SAECO WGA5001009000 3319295 <| |> SW TCH 2-POLE BLACK 16A 250V SINGLE-POLE SW ITCH 16A 250V square pin 6x6 mm - button block 13x19 mm for coffee delivery SAECO WGA5302001000 3319780 |> BLOCK CONNECTION W HITE 30x22 mm 3319782 |> FRAM E SAFETY 2 SIDES BLACK 30x22 mm 3319501 |> <| 16(4)A 250V - max. temperature 120°C with indicator lamp with green led mounting hole 22x30 mm SAECO 186051800 3319779 |> BLOCK CONNECTIONS BLACK 30x22 m m <| 3319783 |> FRAM E SAFETY 4 SIDES BLACK 30x22 mm <| <| <| PUSH-BUTTON PROTECTION CAP external dimensions 29x36 mm for switches with mounting hole 22x30 mm <T1 T1> SAECO Suitable for: Suitable for: Tampers for coffee < T 2 1385002 <| |> NYLON COFFEE TAM PER ø 50/57 mm <| T 2 > |> SAECO WGA2PR/1 Terminal blocks < T 2 3247009 <| |> 6-POLE TERM INAL BLOCK FV122/B 40A 600V <| T 2 > |> for cable max 6 mm2 operating temperature 150°C nominal voltage 450 V SAECO WGADM1930 SAECO WGADM1931 3444442 <| T 2 > Thermostats < T 2 |> THREE-PHASE THERM OSTAT 170°C <| |> with manual reset covered capillary 880 mm bulb ø 6x88 mm SAECO WGA5001013000 SAECO 5024007000 1739004 <| T 2 > Transformers < T 2 |> TOROIDAL TRANSFORM ER 200VA 50/60Hz primary tension 230V - secondary tension 22/24V SAECO NE19.028 <| |> <T1 T1> SAECO Suitable for: Suitable for: 1349651 <| |> PIPETTE FITTING 90° 5062552 <| |> SANTOPRENE internal pump connection ø 6 mm hose-end fitting ø 7.5 mm SAECO 147920150 5057079 <| |> 1120031 |> SAECO 9991.084 SAECO 12000142 1120029 <| SAECO 11010166 1331023 |> SAFETY VALVE FOR VIBRATORY PUM P SQUARE DAMPER EX-EP-EK-EA <| 1331032 1410001 |> |> SAFETY VALVE FOR VIBRATORY PUM P SAECO 229451300 SAFETY VALVE FOR VIBRATORY PUM P SAECO 21000470 SAECO WGADY0003 <| |> SAECO 11012279 <| SAECO 9079.A27 <| PUMP VIBRATORY EAP5 52W 120V 60Hz fittings ø 1/8"- ø 6 mm max pressure 15 bar water temperature max 25°C integrated diode (1N 4007P) connector terminal 6.3x0.8 mm SAFETY VALVE FOR VIBRATION PUMP SAECO 11004689 <| T 2 > Vibrating pumps < T 2 SAECO 149185850 THERM AL PROTECTION 120°C 1331022 SAECO 9991.056 |> SAECO 11012194 1331020 <| |> for vibratory pump SAECO 289200100 SAECO 289200300 SQUARE DAMPER HF VALVE S3BP back pressure self-priming boiler and bypass atmospheric pressure reset and by-pass SAECO 149452450 <T1 T1> SAECO Suitable for: 2102265 <| Suitable for: |> VIBRATION PUMP EP5 41W 120V 60Hz 1122738 <| |> connections ø 1/8"- ø 6 mm max pressure 15 bar water temperature max 25°C integrated diode (1N 4007P) connection terminal 6.3x0.8 mm SAECO 12000131 1122002 <| |> SAECO 9070.035.00F SAECO 9070.035.00P VIBRATORY PUM P EP5GW 48W 230V 50Hz 1331026 <| |> fittings ø 1/8" - ø 6 mm pressure max 15 bar max water temperature 20°C integrated diode (1N 4007P) lead connector 6.3x0.8 mm SAECO 12000132 1122601 <| |> SAECO 9070.026.00A SAECO 9070.035.00A VIBRATORY PUM P EX5 41W 120V 60Hz SAECO 12000140 1122735 <| |> 1122736 VIBRATORY PUM P EX5 48W 24V 50/60Hz fittings ø 1/8"- ø 6 mm pressure max 15 bar water temperature max 20°C integrated diode (1N 4007P) lead connector 6.3x0.8 mm SAECO 187720950 VIBRATORY PUM P EX5 48W 230V 50Hz fittings ø 1/8"- ø 6 mm pressure max 15 bar water temperature max 20°C integrated diode (1N 4007P) lead connector 6.3x0.8 mm SAECO 9070.026.00F |> VIBRATORY PUM P EP5GW 48W 230V 50Hz countersunk fitting ø 1/8" - ø 6 mm max. pressure 15 bar max water temperature 20°C integrated diode (1N 4007P) lead connection 6.3x0.8 mm fittings ø 1/8"- ø 6 mm pressure max 15 bar water temperature max 20°C integrated diode (1N 4007P) lead connector 6.3x0.8 mm <| VIBRATORY PUM P EP5 48W 24V 50/60Hz fittings ø 1/8"- ø 6 mm pressure max 15 bar water temperature max 20°C integrated diode (1N 4007P) lead connector 6.3x0.8 mm SAECO 187720958 1331009 <| |> VIBRATORY PUM P EX5GW 48W 230V 50Hz KIT connections ø 1/8" - ø 7 mm max pressure 15 bar water temperature max 35°C integrated diode (1N 4007P) lead connector 6.3x0.8 mm SAECO 9070.043.00A <T1 T1> SAECO Suitable for: 1120025 <| Suitable for: |> VIBRATORY PUM P EX7 48W 230V 50Hz 1331005 <| |> fittings ø 1/8" countersunk - ø 6 mm pressure max 7 bar temperatura dell'acqua max 20°C integrated diode (1N 4007P) lead connector 6.3x0.8 mm SAECO 187720958EX7 1331021 <| |> VIBRATORY PUM P FLUID-O-TECH 70W 220V 220V 50Hz - fittings ø 1/8" without by-pass for BIANCHI SAECO 9070.051.00A VIBRATORY PUM P HF 22W 230V 50Hz |> <| hose-end fitting ø 6.6 mm - ø 6.6 mm max pressure 2.6 bar water temperature max 20°C integrated diode (1N 4007P) lead connector 4.7x0.8 mm SAECO 12001212 5049142 <| |> CONTAINER FOR W ATER 5061227 <| |> max. encumbrance 180x110x150 mm 1201019 |> CONTAINER FOR W ATER max. encumbrance 260x155x70 mm SAECO 11002017 <| T 2 > Water containers for OCS HORECA < T 2 SAECO 11013212 FLOATING SPACE PLUG 1186844 <| |> GASKET GREY COVER for water tank receiver connection external ø 35 mm - internal ø 15 mm SAECO 142844380 5029644 <| |> SAECO 9161.050.230 GASKET HOLDER SAECO 0701.031 5030079 <| SAECO 0701.031.150 |> for water container SAECO 0701.014.150 SAECO 149185359 SAECO 142690381 TANK FOR W ATER SAECO 142844059 <T1 T1> SAECO Suitable for: 5500614 <| Suitable for: |> W ATER CONTAINER 1080130 <| |> W ATER TANK maximum overall dimensions 205x118x115 mm SAECO 0311.A05.230 1080133 <| |> SAECO 222693880 SAECO 0317.A16.230 W ATER TANK 5500652 <| SAECO 222692800 1080115 <| |> |> SAECO 0301.046.230 W ATER TANK LID BLACK 1080112 <| |> dimensions 196x74 mm SAECO 142802050 1358005 W ATER TANK TRASPARENT GREY with filter SAECO 222692480 SAECO 222693580 |> COM PLETE W ATER INLET TAP SAECO 226476380 T 2 > Water filling taps < T 2 <| W ATER TANK |> <| SAECO WGA8001033000 Water softeners and accessories < T 2 3010274 <| |> CARTRIDGE DESCALING FILTER 5050501 <| |> for water treatment for TECHNICAL purposes model AQUA AROMA CREMA duration 150 litres SAECO DESCALING CARTRIDGE FILTER model INTENZA+ SAECO 21001405 SAECO 21002050 T 2 > <T1 T1> SAECO Suitable for: 3010303 <| Suitable for: |> W ATER SOFTENER FOR OCS NICAL 125 for water treatment for TECHNICAL purposes descaling/anti-fouling system suitable f/machines with inlet pipes with strong cation-exchange resin operating range 18°Fr 22L operating range 27°Fr 16L operating range 45°Fr 9L dimensions ø 44x100 mm - from 0°C to 40°C SAECO <| |> The data herewith contained may change without notice and LF SpA cannot be held responsible for possible errors stated or resulting by the use of this document. All rights reserved. No part of this publication may be reproduced without written permission by LF SpA.
Similar documents
Spare parts for:
Espresso machines
Suitable for:
Spare parts for:
Vienna_Deluxe_Cafe-SUP108CR
METAL/BLACK FIXED DISPENSING CHANNEL
METAL/BLACK MOBILE DISPENSING CHANNEL
DISPENSING SUPPORT METALLIZAT.BLACK
BLACK FOOT FOR REVOLVING RING
ROTATING RING ASS.GREY/BLACK FEET
COFFEE CONT.LID M5000-...
