HF 234 - Masini de spalat Industriale

H I G H
HF 150
HF 185
HF 234
HF 304
S P I N
W
A S H E R
E X T R A C T O R S
Masina spalat,masini spalat,echipamente curatatorie chimica,masini spalat industriale,masini spalat profesionale,masina spalat profesionala,masina spalat
rufe,echipamente spalatorie haine,echipamente spalatorie rufe,masini spalat industriale, masini spalat profesionale, calandre, calandru, prese de calcat
industriale, curatatorie chimica, masini uscat rufe industriale.
HF 150 - HF 185 - HF 234 - HF 304
Door
PVC connection
• Easy loading & unloading
• Over-dimensioned hinges
• Stainless steel door with a matt finish !
• Simple and efficient connection of
the soap pumps
Connection from the soap
box to the tub
• Connection at the back of the tub
• No aggressive detergents directly
on the linen
• Less noise
Doorhandle
• A new safe and comfortable doorhandle
• Interchangeable with the previous model
Extraction vs residual moisture
• The higher the G-Force during extraction, the lower
the water retention of the fabrics being processed
• A higher G-Force will reduce the gas or electricity
used during the drying process
-> reduced drying and finishing time
-> reduced linting
-> extended linen life
• High speed extraction can eliminate preconditioning
of items to be ironed
-> energy save
-> increased production
Water retention after extraction (% of water)
100%
80%
60%
50%
48%
43 %
40%
20%
0%
380 G
419 G
* Test done with load of 30kg (100% cotton)
475 G
Bearing house
• Over-sized industrial bearing houses
• Steel axial seals made out of graphite and stainless steel
• Well balanced steel shaft
Standard inverter drive
•
•
•
•
•
Washing and spin speeds freely programmable
Rotation and stop time freely programmable from 0,1 till 60 sec
Low sound level
Less unbalances
Less current peaks
Speed sensor
• Exact rpm
IPSO wet cleaning system
• An alternative cleaning method using water
• Wet treatment process with low temperature, low mechanical actions and short
cleaning times
• The machine is capable of processing the most delicate silk
blouses, woolen blankets, bedcovers, synthetic materials, cotton garments,
overcoats or suits
HF 150 - HF 185 - HF 234 - HF 304
HF 150 & HF 185
• HF 150: the machine with the largest door in
its capacity
• HF 185: the most compact machine of this
capacity on the market
• Both available in coin version
Easy service
• Self-tensioning poly-V-belt
• Self-cleaning water level hose
• Water level hose & drain valve
mounted in front under the tub
• Extra low position of the counterweight
incorporated in the suspended frame
Large door
• Diameter 400mm: easy loading & unloading
CYGNUS PROFESSIONAL
• Extensive control allowing unlimited flexibility. The
large LCD-display provides the user with in-depth
info on the wash cycle. Wash data and
parameters can be modified, even during the
wash cycle. Programme titles can be easily
translated in every possible language (Russian,
Japanese, Chinese, Korean, Arabic, …).
CYGNUS PREMIUM
• Extensive control with large LCD-display showing
an overview of the wash programme by means
of easy understandable symbols. Cygnus
Premium enables the user to adjust parameters
of wash programmes on the machine.
CYGNUS COMMERCIAL
• Flexible control featuring up to 60 freely
programmable programmes for OPL (20 for
coin) and containing extra functions (hold, soak,
adjustable final spin, predefined start, rapid
advance function).
CYGNUS STANDARD
• Flexible control featuring 5 standard wash
programmes for OPL (7 for coin) and offering
limited indication of functions during the wash
cycle.
TECHNICAL SPECIFICATIONS HF 150-185
Cylinder:
Capacity 1/9 (kg)
HF 150
HF 185
16,1
20,1
Capacity 1/10 (kg)
14,5
18,1
Volume (L)
145
181
Diameter (mm)
680
680
Depth (mm)
400
500
3
3
Door opening diam. (mm)
Perforations diam. (mm)
400
400
Height to doorhandle (mm)
745
745
Speed:
Spin (rpm)
250 to 1000
250 to 1000
Distribution (rpm)
85
85
Wash (rpm)
10 to 50
10 to 50
G-force
380
380
Kinetic energy of the cylinder (N/m)
1200
1200
Dynamic bottom load (N/16Hz)
2736
4105
Power motor (W)
2200
2200
Water pressure (bar)
3 to 5
3 to 5
Hot water T° (boiler fed) (°C)
80
80
Max. water consumption (L)
165
210
Warm water need (boiler fed machine) (L/cycle)
110
130
Diam. drain (mm/")
50 / 2
50 / 2
Drain by gravity (L/min)
80
80
Steam connection (“)
3/8
3/8
Steam pressure (bar)
2,0 - 5,5
2,0 - 5,5
Weight
gross (kg)
383
418
nett (kg)
363
391
Dimensions:
Packing dimensions:
Type of heating
Height (mm)
1348
1348
Width (mm)
780
780
Depth (mm)
753
853
Height (mm)
1500
1500
Width (mm)
850
850
Depth (mm)
950
1020
Volume (m3)
1,21
1,3
POWER SUPPLY - FUSES
230V
1AC
230 V
3 AC
400V
(tri + N)
230V
1 AC
230 V
3 AC
400V
(tri + N)
Boiler fed
20 A
20 A
20 A
20 A
20 A
20 A
Steam heating
20 A
20 A
20 A
20 A
20 A
20 A
Electrical heating 12 kW
63 A
40 A
63 A
40 A
Electrical heating 15 kW
63 A
50 A
63 A
50 A
Electrical heating 18 kW*
70 A
50 A
70 A
50 A
Electrical heating 21 kW
63 A
63 A
Electrical heating 24 kW
63 A
63 A
All specifications subject to change without notice.
A.
B.
C.
D.
Ventilation soap dispenser
Liquid soap connetions
Hard water connections 3/4"
Warm water connections 3/4"
(*) Standard heating
E.
F.
G.
I.
Soft water connections 3/4"
Connections clamps
Electrical connections
Ventilation tub
J. Bolt pattern for fixation
K. Drain valve
L. Steam connection
>>
front view HF 150-185
front view HF 234
front view HF 304
rear view HF 150-185
rear view HF 234
rear view HF 304
side view HF 150-185
side view HF 234
side view HF 304
TECHNICAL SPECIFICATIONS HF 234-304
HF 234
HF 304
Capacity 1/9 (kg)
26
33,7
Capacity 1/10 (kg)
23,4
30,4
Volume (L)
234
304
Diameter (mm)
750
850
Depth (mm)
530
537
3
3
400
400
Height to doorhandle (mm)
820
820
Speed:
Spin (rpm)
250 to 1000
250 to 1000
Distribution (rpm)
85
85
10 to 50
10 to 50
Wash (rpm)
G-force
419
475
Kinetic energy of the cylinder (N/m)
1700
2000
Dynamic bottom load (N/15Hz)
6640
12404
Power motor (W)
3000
4000
Water pressure (bar)
3 to 5
3 to 5
Hot water T° (boiler fed) (°C)
80
80
Max. water consumption (L)
257
335
Diam. drain (mm/")
75 / 3
75 / 3
Drain by gravity (L/min)
160
160
Steam connection (“)
1/2
1/2
Steam pressure (bar)
2,0 - 5,5
2,0 - 5,5
Weight
gross (kg)
584
781
nett (kg)
534
731
1528
1558
Dimensions:
Packing dimensions:
Height (mm)
Width (mm)
900
1060
Depth (mm)
1010
1150
Height (mm)
1700
1740
Width (mm)
970
1120
Depth (mm)
1100
1260
Volume (m3)
1,81
2,46
Type of heating
POWER SUPPLY - FUSES
230V
1AC
230 V
3 AC
400V
(tri + N)
230V
3 AC
400 V
tri + N
Boiler fed
32 A
32 A
32 A
32 A
32 A
Steam heating
32 A
32 A
32 A
32 A
32 A
Electrical heating 12 kW
63 A
50 A
Electrical heating 15 kW
70 A
50 A
Electrical heating 18 kW
80 A*
63 A*
80 A*
63 A
Electrical heating 21 kW
63 A
63 A
Electrical heating 24 kW
70 A
70 A*
Electrical heating 30 kW
All specifications subject to change without notice.
80 A
(*) Standard heating
Alliance International bvba, Nieuwstraat 146, B-8560 Wevelgem (Belgium)
Tel +32 56/41 20 54 - Fax +32 56/41 86 74 - [email protected] - WWW.IPSO.BE
Masina spalat,masini spalat,echipamente curatatorie chimica,masini spalat industriale,masini spalat profesionale,masina spalat
profesionala,masina spalat rufe,echipamente spalatorie haine,echipamente spalatorie rufe,masini spalat industriale, masini spalat
profesionale, calandre, calandru, prese de calcat industriale, curatatorie chimica, masini uscat rufe industriale.
PRINTED ON 60% FIBRE RECYCLED PAPER.
Perforations diam. (mm)
Door opening diam. (mm)
HF1501022011
Cylinder: