Wolf Adjustable Trimmer

The Wolf Adjustable
Trimmer can be hand
held against a bench
pin or table top. (see
above).
Warning! Tie hair back, wear safety glasses and NIOSH
approved dust mask!
Easy to use– one knob tightens to adjust the angle and
secure the Wolf Adjustable Trimmer to a #30 flex shaft
handpiece (not included).
The table slides on the
slotted undercarriage
to keep the gap
between table and bur
minimal . Hand turn
the bur to make sure
the table is in the
correct position before
pressing the flex shaft
foot pedal.
Degree indexing on
the side of the Wolf
Adjustable Trimmer
makes it easy to mill
and reproduce specific
angles. The ripfence
can be moved to either
side of the hole– so you
can work on either side
of the bur.
Use with cylinder bur (11.1 mm
diameter maximum) to quickly
and accurately trim carving wax.
For control, brace ring or pinky
finger of holding hand on edge of
the table. Fast bur speed, firm grip
on wax and smooth, gentle pressure against bur yields best results.
The Wolf Adjustable
Trimmer can also be
held in a GRS
Benchmate (not
included.) When
using with the GRS
Benchmate slide
the included black
plastic collar over a
#30 hand piece so the
tapered end of the
collar fits into the GRS
Benchmate bracket.
Use the Wolf
Adjustable Trimmer
with separating disk(s)
on metal to cut
grooves for inlay or
channel setting.
W ol f Ad jus tab le Tri mmer
#59-1728
Manufactured by Ikohe, Inc.
For free tutorials and more information
about award winning Wolf Tools and
Wolf Wax by Ferris visit:
www.WolfTools.com & www.WolfWax.com
For information about workshops visit:
www.KateWolfDesigns.com
email: [email protected]