Click here to

Transcription

Click here to

GZa^VWaZ!6[[dgYVWaZ¸I]Z8dchjaiVci¼h8]d^XZ#
DIGITOOL® SERIES
STATE-OF-THE-ART, PROGRAMMABLE DIGITAL AUDIO PROCESSING
Announcing the arrival of the new Architectural Acoustics® Digitool®
multi-processor from Peavey® Commerical Audio. Everything you
love about the original Digitool, re-engineered from the ground
up with stronger DNA. Digitools now share a technology platform
with the MediaMatrix NION® processor, providing ample headroom
for running Peavey’s world-class processing algorithms on a
screaming new DSP engine. Equipped with power and pedigree,
the new Digitools represent the new breed of state-of-the-art
digital signal processing.
Features and specifications subject to change without notice.
Peavey Electronics Corporation • 5022 Hartley Peavey Drive • Meridian, MS 39305 • (601) 483-5365 •
FAX (601) 486-1278 • www.peavey.com • PRINTED IN THE U.S.A.
]iie/$$XdbbZgX^Va#eZVkZn#Xdb
DIGITOOL® SERIES
NOW COMPATIBLE WITH MEDIAMATRIX® NWARE™
DIGITOOL MX32
tJOQVUTPVUQVUT&VSPDPOOFDUPST
t&OIBODFEOBWJHBUJPO
t'SPOUQBOFMNVUFTXJUDIFT
t'SPOUQBOFMJOQVUPVUQVUNFUFSJOH
t'SPOUQBOFM64#QPSU
t3FBSQBOFM&UIFSOFUQPSU
tDPOUSPMWPMUBHFQPSUT
t/8BSFCBTFEGSPOUQBOFM(6*
t"&4JOQVUTBTTJHOBCMFUPBOZPVUQVUT
DIGITOOL MX16
tJOQVUTPVUQVUT&VSPDPOOFDUPST
t&OIBODFEOBWJHBUJPO
t'SPOUQBOFMNVUFTXJUDIFT
t'SPOUQBOFM64#QPSU
t3FBSQBOFM&UIFSOFUQPSU
tDPOUSPMWPMUBHFQPSUT
t"&4JOQVUBTTJHOBCMFUPBOZPVUQVUT
DIGITOOL LIVE
t%FTJHOFEGPSMJWFTPVOEBQQMJDBUJPOT
tJOQVUTPVUQVUTCBMBODFE9-3
t&OIBODFEOBWJHBUJPO
t'SPOUQBOFMNVUFTXJUDIFTGPSBMMJOQVUTBOEPVUQVUT
t'SPOUQBOFM&UIFSOFUQPSU
t3FBSQBOFM&UIFSOFUQPSUGPSOFUXPSLDPOOFDUJWJUZ
t"&4JOQVUBTTJHOBCMFUPBOZPVUQVUT
QF™ SERIES
PROFESSIONAL EQUALIZATION WITH FLS® AND A FULL 18 DB OF CUT
2'
%VBM$IBOOFM#BOE&2
t$POTUBOU2öMUFST
t%VBMDIBOOFMCBOETQFSDIBOOFM
tE#CPPTUE#DVUQFSCBOE
tPDUBWFöMUFSTFUT
tECQFSPDUBWF)[MPXDVUöMUFSXJUITUBUVT-&%
t*40DFOUFSGSFRVFODJFTXJUIJOBDDVSBDZ
tE#HBJODPOUSPM
t)[UPL)[FòFDUJWFFRVBMJ[BUJPOSBOHF
t*NQSPWFE1FBWFZ'-4¥'FFECBDL-PDBUJOH4ZTUFN
tNNDFOUFSEFUFOUDPOUSPMTMJEFSTFODMPTFEJONFUBMGPSEVSBCJMJUZ
t9-3BOEw534JOQVUTPVUQVUTGPSCBMBODFEPSVOCBMBODFEPQFSBUJPO
Model
QF™ 215
Frequency Response
Input
Impedance
Output
Impedance
Filter Q
12 Hz to 20 kHz
20 k ohm
660 ohm
2.3
Output
Noise
Bypass Mode -100 dBV
Filter Mode (Flat) -98 dBV
Max Boost Power
and Cut Filter
Power
Requirements
Dimensions
& Weight
+12 dB/-18 dB
120 VAC, 60 Hz, 12 watts
3.5" H x 19" W x 7.375"
7.8 lbs.
2'
#BOE&2
tCBOEHSBQIJD&2XJUIE#CPPTUE#DVUQFSCBOE
t)[UPL)[FòFDUJWF&2SBOHF
tPDUBWFöMUFSTFUT
t9-3BOEw534JOQVUTPVUQVUTGPSCBMBODFEPSVOCBMBODFE
PQFSBUJPO
t$POTUBOU2öMUFST
t#ZQBTTTXJUDIXJUITUBUVT-&%
t0VUQVUMFWFM-&%TUPE#
t/FXJNQSPWFE'-4¥DJSDVJUSZGPSHSFBUFSTFOTJUJWJUZ
tE#QFSPDUBWF)[MPXDVUöMUFSXJUITUBUVT-&%
Model
QF™ 131
Frequency Response
Input
Impedance
Output
Impedance
Filter Q
12 Hz to 20 kHz
20 k ohm
660 ohm
4.77
Output
Noise
Bypass Mode -101 dBV
Filter Mode (Flat) -95 dBV
Max Boost Power
and Cut Filter
Power
Requirements
Dimensions
& Weight
+12 dB/-18 dB
120 VAC, 60 Hz, 12 watts
3.5" H x 19" W x 7.375"
7.2 lbs.
QF™ 131 & QF™ 215
The QF family features one dual-channelmodel and one single-channel unit, all incorporating Peavey’s
legendary low-noise, low-distortion design. Ruggedlyconstructed, QF Series EQs have 45 mm, centerdetented control sliders enclosed in metal for durability. These tworack-space units also offer ±15 dB
gain control and an LED display indicating output level. Other shared features includeswitchable low-cut
filters, +21 dBu balanced inputs and outputs, and bypass switches. QF Series equalizer filters areset at ISO
center frequencies within 3% accuracy. Whether on stage, in the studio, or simply tweaking your home
hi-fi system, the QF Series has an EQ for you.
QF 131 Features:
• 31-band graphic EQ with +12 dB boost/-18 dB cut per band
• 1/3 octave filter sets
• ISO center frequencies within 3% accuracy
• 45 mm, center-detent control sliders enclosed in metal for durability
• Constant Q filters
• Output level LEDs (-12 to +12 dB)
• 18 dB per octave 40 Hz low-cut filter with status LED
• +/-15 dB gain control
• 20 Hz to 20 kHz effective equalization range
• XLR and 1/4” TRS inputs/outputs for balanced or unbalanced operation
• Bypass switch with status LED
• Improved FLS® (Feedback Locating System) circuitry for greater sensitivity
QF 131 & QF 215 - Pg. 1
QF™ 131 & QF™ 215
QF 215 Features:
• Dual channel (15 bands per channel)
• 2/3 octave filter sets
• ISO center frequencies within 3% accuracy
• 25 Hz to 16 kHz effective equalization range
• 45 mm, center-detent control sliders enclosed in metal for durability
• Constant Q filters
• Output level LEDs (-12 to +12 dB)
• 12 dB boost/18 dB cut per band
• 18 dB per octave 40 Hz low-cut filter with status LED
• +/-15 dB gain control
• Improved Peavey FLS® (Feedback Locating System)
• XLR and 1/4 inch TRS inputs/outputs for balanced or unbalanced operation
SPECIFICATIONS*
Filter Q
Filter Frequencies (Hz)
Maximum Boost
and Cut Filter
Output Noise
Bypass Mode
Filter Mode (Flat)
QF™ 131
4.77
20, 25, 32, 40, 50, 63, 80,
100, 125, 160, 200, 250,
315, 400, 500, 630, 800,
1 k, 1.25 k, 1.6 k, 2 k, 2.5 k,
3.15 k, 4 k, 5 k, 6.3 k, 8 k,
10 k, 12.5 k, 16 k, 20 k
+12 dB / -18 dB
-101 dBV
-95 dBV
QF™ 215
2.3
25, 40, 63, 100, 160,
250, 400, 630, 1 k, 1.6 k,
2.5 k, 4 k, 6.3 k, 10 k, 16 k
+12 dB / -18 dB
-100 dBV
-98 dBV
QF 131 & QF 215 - Pg. 2
QF™ 131 & QF™ 215
ALL MODELS
Frequency Response:
± 1 dB (20 Hz – 20 kHz)
Distortion:
.002% (20 Hz – 20 kHz)
Input Impedance:
Balanced 20 k Ohms (equal impedances to ground)
Output Impedance:
660 Ohms
Maximum Input Level:
+18 dBV (8 V RMS)
Maximum Output Level:
-18 dBV unbalanced; +21 dBV balanced
Nominal Input Level:
0 dBV (1 V RMS)
Nominal Output Level:
0 dBV (1 V RMS)
Input Headroom:
Nominal 18 dB
Output Headroom:
18 dB
Maximum Boost and
Cut Gain:
+15 dB / -15 dB
Low Cut Filter:
40 Hz @ 24 dB per octave
Power Consumption:
Domestic: 120 VAC, 60 Hz, 12 Watts
Export: 220-230V~, 50/60 Hz, 12 Watts
Dimension:
3.5" (89 mm) H x 19" (483 mm) W x 7.375" (187 mm) D
Weight:
7.8 lbs. (3.54 kg)
* All specifications are typical unless otherwise noted. (0 dBV = 1 volt.) All specifications are referenced to nominal
output level (0 dBV) unless otherwise stated.
NOTE: All specifications measured at 1 V RMS input, unbalanced output, sliders at mid position, and all switches out
unless otherwise noted.
QF 131 & QF 215 - Pg. 3
Logo referenced in Directive 2002/96/EC Annex IV
(OJ(L)37/38,13.02.03 and defined in EN 50419: 2005
The bar is the symbol for marking of new waste and
is applied only to equipment manufactured after
13 August 2005
05/2011
D4S™ / D1V™
FLUSH-MOUNT BUTTON CONTROL
t6QUPGPVSQBOFMTPOBTJOHMF%JHJUPPM¥.9
t"UUSBDUJWFDPTNFUJDQBDLBHF
t34NVMUJESPQOFUXPSL
t4UBOEBSE%FDPSB(NPVOUJOH
t&BTZXJSJOHBOEJOTUBMMBUJPO
t'MFYJCMF"EESFTTBCMF
t$POöHVSBCMFDPOUSPMT
t5SBDLJOH-&%TUBUVTJOEJDBUJPOGPSNVMUJQMFMPDBUJPOT
D1V™ Rotary Control Panel
The D1V is a one-gang Decora™ panel with four programmable “virtual” rotary controls and status LEDs.
Features:
• Standard Decora package
• Assignable controls
• LED control status indicators
• Label space for customization
• RS-485 network connectivity
• Easy wiring & installation
• Flexible
• Addressable
• Tracking rotary control locations
• Software upgradeable
• Power supply card available
• Low power requirements
• Cost effective
• Integral EOL Terminators
Applications:
• Conference Rooms
• Meeting Rooms
• Combinable Ballrooms
• Paging Systems
• Entertainment Systems
• Theatre BOH (Back of House)
• Bars & Restaurants
13 August 2005
05/2011
• Schools
• Medical Facilities
• Institutional Facilities
• Municipal Facilities
• Courtrooms
• Lecture Halls
• Presentation Rooms
D4S™ Button Control Panel
The D4S is a one-gang Decora™ panel with four programmable buttonsand status LEDs.
Features:
• Standard Decora package
• Assignable controls
• LED control status indicators
• Label space for customization
• RS-485 network connectivity
• Easy wiring & installation
• Flexible
• Addressable
• Tracking rotary control locations
• Software upgradeable
• Power supply card available
• Low power requirements
• Cost effective
• Integral EOL Terminators
Applications:
• Conference Rooms
• Meeting Rooms
• Combinable Ballrooms
• Paging Systems
• Entertainment Systems
• Theatre BOH (Back of House)
• Bars & Restaurants
13 August 2005
05/2011
• Schools
• Medical Facilities
• Institutional Facilities
• Municipal Facilities
• Courtrooms
• Lecture Halls
• Presentation Rooms
IDL™ 1000
MULTI-TAP DIGITAL DELAY LINE
The IDL™ 1000 is a two-input, three-output, multi-tap
t5XPJOQVUUISFFPVUQVUEFMBZ
delay line designed primarily for time alignment in multi-
t&MFDUSPOJDBMMZCBMBODFEJOQVUTBOEPVUQVUT
speaker sound systems. With 1.35 seconds of delay, the
t0QUJPOBMUSBOTGPSNFSCBMBODFEJOQVUTBOEPVUQVUT
IDL 1000 can align multiple speaker systems in the largest
arenas and stadiums. The IDL 1000 has mono and stereo
modes of operation. The minimum delay increment of 20.8
microseconds allows alignment of drivers in an array with
tTFDPOETPGNBYJNVNEFMBZ
t*OUFHSBMTFDVSJUZQBOFM
tNJDSPTFDPOETNJOJNVNEFMBZTUFQT
t0OFSBDLTQBDF
t$&BQQSPWFE
1/4” precision.
Model
™
IDL 1000
Frequency Response
THD
+N
S/N
Ratio
Converters
Dimensions
Agency
Approvals
Operating
Voltage
12 Hz to 20 kHz, +1/-2 dB
.015%
>90 dB
A/D 16 bit 64x
Oversampled
1.75" H x 19" W x 7.5"
D/A 16 bit linear
UL, CUL
120/240
IDL™ 1000
The IDL 1000 is a 2-input, 3-output, multi-tap digital delay line designed primarily for time alignment in
multi-speaker sound systems. With 1.35 seconds of delay (over 1/4 mile), the IDL 1000 can aligh multiple
speaker systems in even the largest arenas and stadiums. In the stereo mode, Input “B” and Output 3 form a
second delay line that dynamically shares the delay memory. The minimum delay increment of 20.8 microseconds in the IDL 1000 allows alignment of drivers in an array with 1/4” precision.
Features:
• Two electronically balanced inputs (transformer
optional)
• Three electronically balanced outputs (transformer
optional)
•Stereo or mono operation
• 1.35 seconds maximum delay time
• 20.8 microseconds minimum delay steps
• 4-digit, 7-segment LED for data entry
• Delay can be entered in milliseconds, feet, or
meters
• Individual output switches to mute or compare
delay to zero
• 16-bit, 64 times oversampled Delta-Sigma A/D
converter
• 48 kHz sample rate
• 20 kHz bandwidth
• Input and output controls with security cover
• Maximum input level +25 dBu
• Maximum output level +24 dBm
• Rear panel security lock switch to protect delay
settings
• Relay bypass or mute with power off
• 1 RU 19” rack-mount configuration
IDL 1000- Pg. 1
IDL™ 1000
Frequency Response:
Signal to Noise Ratio:
Total Harmonic Distortion:
Input Impedance:
Output Impedance:
Maximum Input Level:
Maximum Delay Time:
Minimum Resolution:
Maximum High Resolution Delay:
64xOversampling Decimation:
Input Level Indicator:
A/D Converter:
D/A Converter:
Non-volatile Memory:
Security:
Dimensions:
Power Requirements:
Weight:
+/- 1.6dB 10Hz to 20kHz
Greater than 90dB
Less than 0.015% @ 1kHz
15k Ohms - Electronically Balanced (transformer optional)
200 Ohms - Electronically Balanced (transformer optional)
+25dBu
+26dBu (Hi Z Load), +24dBm (600 Ohm Load)
Mono 1.35 Sec., Stereo (output 1 or 2 + 3) < or = to 1.35 Sec
20.8 microseconds
ms display mode: 99.99 ms, ft. display mode: 99.98 ft. (88.48 ms)
1130 ft./sec., m display mode: 9.996 m (29.06 ms) 344 m/sec
470 microseconds
BiColor LED: Green=18dB headroom, Red=6db headroom
16 Bit 64xoversmapled A/D converter
16 Bit Linear
Does not require batteries
Slide cover for input and output controls, rear panel lock switch
disables butoons to protect settings, delay settings can still be viewed
19” W x 7.25” D x 1.75” H (48.3cm x 18.4cm x 4.4cm)
Domestic: 120VAC 60Hz, Export: 220-240VAC 50/60Hz
7.5 lbs. (3.4 kg)
IDL 1000 - Pg. 2
13 August 2005
05/2011
80301608
CEL™ 2A
COMPRESSOR, EXPANDER/GATE, LIMITER
$&-"8JUI)JHI1BTT'JMUFS
A built-in high-pass filter (DE-ESS) in the side chain makes the CEL 2A track vocals better than any other compressor/limiter on the market.
This fully adjustable compressor/expander/limiter can be
t4UFSFPPSEVBMNPOPPQFSBUJPO
used as two independent compressors or a single, synced
t4XJUDIBCMFMPXDVUöMUFSPOFBDIDIBOOFM
stereo compressor with true RMS summing. Voltage-
t4XJUDIBCMFEFFTTFSPOFBDIDIBOOFM
controlled amplifier and RMS-integrated circuits maintain
low distortion and excellent noise performance, while
switchable low-cut filter and de-esser on both channels
tw534JOTFSUDBQBCJMJUZ
t'VMMZBEKVTUBCMFDPNQSFTTPSMJNJUFSFYQBOEFS
t'VMMHBJOSFEVDUJPONFUFSJOH
t*OQVUPVUQVUTXJUDIBCMFNFUFST
expand the capabilities in live and studio applications.
Model
Frequency
Response
CEL™ 2A
20 Hz to 64 kHz
(+0 dB/-1 dB)
Input
20 k ohm (Bal.)
10 k ohm (Ubal.)
Output
Impedance
100 ohm
THD+N
Impedance
<0.1%
(10 Hz to 80 kHz BW)
S/N
Ratio
97 dB
(0 dBu reference level)
Dimensions
& Weight
1.75” H x 19” W x 9.25”
(7.2 lbs)
Agency
Approvals
Operating
Voltage
cUL, UL
100-120 VAC;
50/60 Hz; 15 Watts
CEL™ - 2a
The CEL-2a Compressor/Expander/Limiter is designed for use in all live performance and recording
applications, and can be incorporated as either two independent compressors or one synched stereo
compressor with true RMS summing. Voltage-controlled amplifier and RMS-integrated circuits maintain low distortion and excellent noise performance.
Features:
• Stereo or dual mono operation
• Switchable low cut filter on each channel
• Switchable de-esser on each channel
• 1/4 inch TRS insert capability
• Fully adjustable compressor/limiter/expander
• Full gain reduction metering
• Input/Output switchable meters
Applications:
• Spoken Word
• Lead Vocal
• Background Vocal
• Keyboards
• Acoustic Guitar
• Electric Guitar
• Bass Guitar
• Kick Drum
• Recording
CEL-2a - Pg. 1
CEL™ - 2a
Control:
Expander Threshold:
Expander Ratio:
Expander Attack:
Expander Release:
Compressor Threshold:
Compressor Ratio:
Compressor Attack:
Compressor Release:
Limiter Threshold:
Limiter Attack:
Limiter Release:
Gain Recovery:
-80 dBu to +10 dBu
1:1 (off) to 1:5 (gate)
.5 mSec (fixed)
200 mSec (fixed)
-40 dBu to +20 dBu
1:1 (off ) to infinite:1 (limit)
.5 mSec to 100 mSec
.05 sec to 2 sec
0 dBu to +20 dBu (off )
.5 mSec (fixed)
50 mSec (fixed)
0 dB to +20 dB
Input Imepedance:
20k Ohms, XLR connector (1 = g, 2 = +, 3 = -), balanced
20k Ohms, TRS connector (Sleeve = g, Tip = +, Ring = -), balanced
10k Ohms, 1/4” connector (Tip = input, Ring = output), unbalanced
T.H.D.:
Less than 0.1%‚ 20 Hz–20 kHz (10 Hz–80 kHz BW)
Signal to Noise:
97 dB (0 dBu reference level)
Frequency Response:
20 Hz–64 kHz (+0 dB/-1 dB)
Output Impedance:
100 oHms (XLR and 1⁄4”)
Meters:
Two 12-segment LED arrays‚ two 10-segment LED arrays‚ two activity LEDs
Dimensions:
19” W x 9.25” D x 1.75” H (48.3cm W x 23.5cm D x 4.4cm H)
Weight:
7.2 lbs. (3.3 kg)
Power Requirements:
Domestic: 100–120 VAC 50/60 Hz (15 watts nominal);
Export: 230 VAC 50/60 Hz (15 watts nominal)
MADE IN THE UNITED STATES
CEL-2a - Pg. 2
13 August 2005
05/2011
KOSMOS® V2
SUBHARMONIC GENERATOR
KOSMOS® V2 Drastically Improves the Listening Experience in Any Space, With Any Sound System.
This subharmonic and stereo enhancement t4FDPOEHFOFSBUJPOTVCCBTTHFOFSBUPSBVEJPQSPDFTTPS
system drastically improves the listening t$POUSPMTGPSTVCIBSNPOJDTMPXGSFRVFODZIJHIGSFRVFODZPVUQVUMFWFMBOETVC
experience in any space, with any sound
PVUQVUMFWFM
t%BNQJOHDSPTTPWFSEJTBCMFDVUTVCTGSPNNBJOTXJUDIFT
system. Replace lost atmosphere and stereo t.POPTVNTXJUDI
separation as well as that kick-in-the-gut bass t*OT0VUTw9-3534
that gets lost in the normal system chain.
t4VCPVU534CBMBODFE
14:$)0"$0645*$4 – The science of the study of the human auditory perception of sound. Based on a study of these principles, some audio
effects processors perform psychoacoustic enhancements based on algorithms written to mimic the auditory effects of human perception.
Model
KOSMOS® V2
Frequency
Response
Input
Output
Impedance
Process Mode: Program Controlled
Bypassed: <10 Hz to 80 kHz (+0 dB/-1 dB)
20 k ohm (Bal.)
10 k ohm (Ubal.)
200 ohm (Bal.)
100 ohm (Unbal.)
THD+N
Impedance
Process Mode: ≤ .003%
Bypassed: ≤ .001%
S/N
Ratio
Dimensions
& Weight
Agency
Approvals
Operating
Voltage
88 dB
1.75” H x 19” W x 9.25”
(7.1 lbs)
cUL, UL, CE
120 VAC; 50/60 Hz
@ 8 Watts
Kosmos® V2
The Kosmos® v2 is a second generation subharmonic and stereo image enhancement system. As the successor to the awardwinning Kosmos®, it incorporates improved circuitry and adds features to prvide even
more functionality for live sound and recording applications. Like the original Kosmos®, it can provide
planet rattling bass as its subharmonic processor watches the source material, analyzes the bass, then generates additional phase-synced low frequencies an octave below it. Borrowing from the Kosmos® Pro, the
damping (tracking) has two preset ranges.
Features:
• Creates intelligent, phase-synced subharmonics that don’t overpower existing material
• Dynamic source tracking yields tight, clean bass sounds
• Subharmonic activity indicator shows processing status
• A specially tuned low frequency circuit, compliments the subharmonics and can be used to fatten the low end
• High frequency image enhancement provides atmosphere through improved stereo separation and clarity
• A rear panel stereo/mono switch allows use as a channel insert or in a monophonic system
• Internal 90 Hz crossover signal can be removed from the subwoofer output when used as a side-chain effect
• Master output level controls left, right, and subwoofer output levels simultaneously
• All inputs & outputs are balanced XLR or 1/4” TRS jacks
• Signal and Peak lamps monitor signal activity and warn of overload
• Independent subwoofer output level control
Kosmos® V2
Frequency Response:
THD+N (10Hz -80K Hz BW):
Signal to Noise:
Crosstalk:
CMRR:
Nominal Input Level:
Max Output:
Max Input:
Input Impedance:
Output Impedance:
Power Requirements:
Dimensions (HxWxD):
Weight:
13 August 2005
05/2011
Process Mode - Controlled
Bypassed - <10Hz to 80Khz +0/-1 dB
Process Mode: ≤ .003%
Bypassed: ≤.001%
88 dB
<75 dB @ 1KHz
60 dB
+4 dBu (1.23 VRMS)
+26 dBu
+22 dBu
20K ohms balanced (Pin 2 positive), 10K ohms unbalanced
200 ohms balanced (Pin 2 positive), 100 ohms unbalanced
8 Watts @ 120VRMS 50/60 Hz, 8 Watts @ 230VRMS 50/60 Hz
1.75” x 19.0”x9.0” (4.45 cm x 48.6 cm x 22.86 cm)
Net: 7.1 lbs (3.22 kg)
Shipping Weight: 8.7 lbs (3.95 kg)
FEEDBACK FERRET® D
AUTOMATIC DIGITAL FEEDBACK ELIMINATOR
%JHJUBM'FFECBDL&MJNJOBUJPO"VUPNBUJDBMMZ
The most transparent feedback eliminator available! Our latest Feedback Ferret seek-and-destroy digital feedback eliminator, based on the original award
winning model, applies sophisticated “smart” notch filters that find, lock and suppress offending frequencies before human ears can even detect them.
Our advanced computer algorithm automatically identifies and suppresses microphone feedback so you can concentrate
on running the mix. Just raise the levels on your mics to the onset of feedback. The filters automatically “learn” the problem
spots in your system and knock them down with great precision, leaving everything else untouched for maximum fidelity.
Then during the performance additional filters are constantly standing by to instantly kill any extra, unexpected feedback.
t%ZOBNJDBMMZTVQQSFTTFTGFFECBDLVTJOHTPQIJTUJDBUFEiTFBSDI
EFTUSPZwöMUFSTUIBUöOEMPDLJOBOELJMMPòFOEJOHGSFRVFODJFT
t'PVSQSFTFUTGPSZPVSNPTUDPNNPOQFSGPSNBODFWFOVFT
t4JYUFFOJOEJWJEVBMöMUFSTDBOPQFSBUFTJNVMUBOFPVTMZFJHIU
EZOBNJDBMMZSFBDUUPJOQVUDIBOHFT
t&YUSB.BYi1BOJDwöMUFSTGPSRVJDLDPOUSPMPGTVEEFOTFWFSF
GFFECBDL
t4UFSFPPSiEVBMNPOPwPQFSBUJPOXIJDIFOBCMFTEZOBNJDBMMZ
DPOUSPMMFEöMUFST
t#BMBODFE9-3BOE534JOQVUTBOEPVUQVUT
t3FBSQBOFM%FGFBUCVUUPOMPDLTPVUJORVJSJOHöOHFST
t4FU'PSHFUPQFSBUJPOJOöYFEJOTUBMMBUJPOTTVDIBTDIVSDIFTBOE
BVEJUPSJVNT
'&&%#"$, – A squeal or a howl of a sound system caused by the regeneration of a signal from the output of a sound system’s loudspeaker back
into a microphone input.
Model
Feedback Ferret® D
Frequency
Response
Input
Impedance
Output
Impedance
THD+N
Ratio
Dimensions
& Weight
Agency
Approvals
Operating
Voltage
20 Hz to 20 kHz
(+/-0.5 dB) Ref. 1 kHz
40 k ohm
120 k ohm
0.005%@1 kHz
Typical
1.75” H x 19” W x 8”
(7.1 lbs)
cUL, UL
120 VAC; 60 Hz;
25 Watts
Feedback Ferret®
Find it and eliminate it. The Feedback Ferret D solves your feedback problems automatically. With the
Feedback Ferret D Dual Channel Digital Anti-Feedback System on the job, feedback can be eliminated
in stereo, or eliminated independently in either channel when configured as a dual mono processor. The
Feedback Ferret D features precise digital filters, fast feedback analysis and an audio friendly approach
to feedback elimination.
The Feedback Ferret D applies 16 stereo digital dynamic filters (or 32 filters in dual mono mode) at a
resolution of 24-bits, automatically controlling feedback without sacrificing volume or tone. The Feedback Ferret D, armed with sophisticated algorithms, distinguishes between music and feedback, seeking and destroying the feedback, leaving your music alone. Although there is no substitute for a good
soundperson, the Feedback Ferret D can greatly improve your sound application.
FEATURES:
• Sophisticated seek and destroy algorithms that find‚ lock in and reduce offending frequencies
• 24-bit converters and a sample rate of 48 kHz
• 16 stereo, dynamically controlled digital notch filters (or 32 filters in dual mono mode) configured for 1/12 octave performance give the Feedback Ferret D more feedback control than any other unit on the market
• Four preset locations allow you to store settings for your most common performance venues
• Disable button located on rear panel allows you to quickly disable the front panel once your settings are made
• +4 or -10 dB switches on each in/out
• Wide/Narrow button changes the width of filters
• Reset button resets some or all of the filters
Where To Put Your Feedback Ferret® D
The Feedback Ferret D can be used in a variety of locations within a sound system. Place a Feedback Ferret D
at the input insert of every microphone, or process multiple microphones together by placing a single Feedback Ferret D on the output of a vocal subgroup. One of the most common uses is to install the Feedback Ferret D between the power amp’s input and the mixer’s output (the main output or the monitor output‚ depending on your needs). You can also place the Feedback Ferret D on a single channel’s
insert to eliminate feedback from a single microphone or instrument. Once the Feedback Ferret D has determined the problem frequencies for a particular setup‚ you can save that group of filter settings to one of the
four preset buttons for instant recall.
Feedback Ferret - Pg. 1
Feedback Ferret®
*OQVU*NQFEBODF
%JNFOTJPOT
4BNQMF3BUF
8JEUIDN
%FQUIDN
)FJHIUDN
8FJHIUMCTLH
%ZOBNJD3BOHF
1PXFS
'SFRVFODZ3FTQPOTF
%PNFTUJD7"$)[8BUUT
&YQPSU7"$)[8BUUT
#ZQBTT
*OQVU-FWFM
LPIN
0VUQVU*NQFEBODF
LPIN
E#S!L)[SFGUP
E#V0VUQVU
)[UPL)[VOXFJHIUFE
5PUBM)BSNPOJD%JTUPSUJPO
E#VOPNJOBM
E#VGVMMTDBMF
0VUQVU%SJWF
$POWFSUFST
CJU
E#
)[UPL)[SFGL)[
E#V
!L)[UZQJDBM
*OQVU4FOTJUJWJUZ
5SVFQPXFSPGGCZQBTT
L)[
E#VOPNJOBM
E#VGVMMTDBMF
.PVOUJOH
0VUQVU-FWFM
0OF&*"SBDLTQBDF
E#V
$POOFDUJPOT
(BJO
#BMBODFEDPNCPGFNBMF
9-3GFNBMF534GPSJOQVU
4FQBSBUFCBMBODFENBMF9-3BOE
GFNBMF534GPSPVUQVU
6OJUZCBMBODFE
E#VOCBMBODFE
0UIFS#BDL1BOFM$POUSPMT
'SPOUQBOFMEJTBCMF
1PXFSVQSFDBMMTFMFDU
Feedback Ferret - Pg. 2
13 August 2005
05/2011
VSX® SERIES
LOUDSPEAKER MANAGEMENT SYSTEM
Take control of every facet of your sound reinforcement with Peavey’s VSX loudspeaker management systems. The VSX 26
features exclusive Peavey digital processing technology, upgradable software and functionality for use in single- or multizone applications—an all-in-one solution in a single rack space!
t5XPJOQVUTTJYPVUQVUT749
'FBUVSFTQFSJOQVU
tL)[TBNQMFSBUFCJUYPWFSTBNQMFE%FMUB4JHNB"%%"
tCBOE1BSB(SBQIJD&2749
t64#"#QPSUTGPSNFNPSZTUPSBHFBOEDPNQVUFSJOUFSGBDF
t$PNQSFTTPS-JNJUFS
t9-3JOQVUTBOEPVUQVUT"&4&#6EJHJUBMJOQVU
t%FMBZNT
tE#VJOQVUTBOEPVUQVUT
'FBUVSFTQFSPVUQVU
t$SPTTPWFS#BOEQBTTöMUFS#VUUFSXPSUI#FTTFM-JOLXJU[3JMFZ
t1IBOUPNQPXFSWPMU
t1BSBNFUSJD&2öWFCBOE)1-1OPUDIIPSO&2BMMQBTT
t#VJMUJOTJHOBMHFOFSBUPSXIJUFQJOLTJOF
t$PNQSFTTPS-JNJUFS
t$PNQVUFS(6*WJB64#
t%FMBZXJUIQPMBSJUZJOWFSTJPO
t&BTZQSFTFUBOETZTUFNVQEBUFTWJB*OUFSOFU
VSX 26 Dimensions (HxWxD): 1.75” x 19” x 8.5”
Weight: 7 lbs.
t'VMMZBEKVTUBCMFDSPTTPWFSQPJOUT
t&BTZUPSFBE-$%TDSFFO
8DBE
VSX 26 Presets
http://www.peavey.com/support/
software/vsx26_presets.cfm
<:F
DJIEJIH
8GDHHDK:G
"OZ$PNCJOBUJPOPG*OQVU5P0VUQVUJT6TFS$POGJHVSBCMF5P.BUDI:PVS4ZTUFN/FFET
4ZNNFUSJDBMBOE"TZNNFUSJDBM$SPTTPWFS$POGJHVSBUJPOTBSF"MTP6TFS4FMFDUBCMF
KHM'+
&
'
(
)
,
&GI6B^X>ceji
'9ViVL]ZZa
(A899^heaVn
)EVgVbZiZgHZaZXi7jiidch
*>ceji$DjiejiBdcîdg^c\
+JH7Edgih
*
+
,MAGBVaZA^cZAZkZaDjiejih
-MAG;ZbVaZA^cZAZkZa>cejih
'*-5&3o"OFMFDUSJDBMPSFMFDUSPOJDEFWJDFUIBUQFSNJUTDFSUBJOGSFRVFODJFTUPQBTTXIJMF
PCTUSVDUJOHPUIFSTTVDIBTBDSPTTPWFSGJMUFSVTFEXJUIMPVETQFBLFST
MMA™ MIXERS
INCREDIBLY FLEXIBLE, INCREDIBLY AFFORDABLE & MADE IN THE U.S.A.
The MMA™ series offers the option to custom design the type of mixer to match your customers requirements. A built-in
program input allows operation right out of the box. Look through the new listing of modules and these products will be
able to provide more features with less inventory than ever before.
.."5
/JOF$IBOOFM.JYFS
t&JHIUDPOöHVSBCMFNPEVMFQPSUT
t%FEJDBUFEQSPHSBNJOQVUDIBOOFM
t#BTTBOEUSFCMFDPOUSPMT
t5XPNVUJOHCVTFT
MMA™ Modular Mixers Allow The Flexibility Of Up To Eight Different
Input Configurations.
t&YUFSOBMWPMVNFDBQBCJMJUZ
t5SBOTGPSNFSCBMBODFENBJOPVUQVU
t5XPSBDLTQBDFTSBDLNPVOUJODMVEFE
t$&BQQSPWFE
.."
8BUU/JOF$IBOOFM.JYFS"NQ
tXBUUJOUFHSBMBNQMJöFS
tWPMUFYQPSU
WPMUWPMUPSPINMPBET
t&YDMVTJWF414TQFBLFSQSPUFDUJPODJSDVJUSZ
t5XPJOEFQFOEFOUNVUJOHCVTFT
t&YUFSOBMWPMVNFDPOUSPMDBQBCJMJUZ
t4FMFDUBCMFMPXDVUöMUFS
t$&BQQSPWFE
8."
8BMM.PVOU.JYFS"NQ
t&JHIUDIBOOFMT
t#BDLCPYJODMVEFE
.."
8BUU/JOF$IBOOFM.JYFS"NQ
t4FWFODPOöHVSBCMFNPEVMFQPSUT
t%FEJDBUFEQSPHSBNJOQVU
tWPMUFYQPSU
WPMUWPMUPSPINMPBET
tWPMUFYQPSU
WPMUWPMUPSPINMPBET
t7BSJBCMFUISFTIPMEDPNQSFTTPS
t/JOFCBOEHSBQIJDFRVBMJ[FS
t5XPJOEFQFOEFOUNVUJOHCVTFT
t'MVTIPSTVSGBDFNPVOUJOH
t4FMFDUBCMFMPXDVUöMUFS
t#MBDLCPYBWBJMBCMFTFQBSBUFMZGPSQSFDPOTUSVDUJPO
SFRVJSFNFOUT
t$&BQQSPWFE
t$&BQQSPWFE
Model
Frequency
Response
Input
Sensitivity
THD
+N
Output Power
Dimensions
& Weight
Agency
Approvals
Operating
Voltage
MMA 800T
20 Hz to 20 kHz, ±1 dB
See module specs
N/A
N/A
UL, CUL
120
MMA 8752
XFMR Output
XFMR Output
XFMR Output
See module specs
0.02%
75 Watts RMS
UL, CUL, CE
120/240
See module specs
0.05%
150 Watts RMS
UL, CUL, CE
120/240
See module specs
0.05%
150 Watts RMS
3.5" H x 17.125" W x 7.75" D
(9.1 lbs)
3.5" H x 17.125" W x 15.375" D
(23.3 lbs w/o modules)
3.5" H x 17.125" W x 15.375" D
(29 lbs w/o modules)
23.5" H x 13.5" W x 4.875" D
(28 lbs w/o modules)
UL, CUL, CE
120/240
MMA 81502
WMA 150
MMA™ 800T
The MMA 800T is a high-quality‚ industrial-grade audio mixer/preamp with nine input channels. Each
channel provides a level control, and the master output section features bass and treble EQ controls (defeatable) and special equalization contour.
The MMA 800T provides unmatched application flexibility and an array of optional plug-in modules,
allowing each system to be tailored to specialized installations. Input modules may be loaded as required for varying sound reinforcement applications (number of input channels, special functions, etc).
Features:
• Nine channel mixing system
• 20 Hz to 20 kHz frequency response
• Bridging input / output
• Dedicated Program input
• Contour switch (special equalization)
• Bass and treble controls
• Plug in module capability
• Rack mountable or stand alone package
Applications:
• Presntation rooms
• Boardrooms
• Courtrooms
• Auditoriums
• Lecture halls
• Meeting rooms
• Convention centers
• Paging systems
MMA 800T - Pg. 1
MMA™ 800T
Output Power:
Controls:
E#NSBUFEPVUQVU
E#NNBYJNVN
JOQVUHBJODPOUSPMTCBTTDPOUSPMUSFCMFDPOUSPM
DPOUPVSTXJUDINBTUFSHBJODPOUSPMQPXFS
TXJUDI&2EFGFBUTXJUDI
Power bandwidth:
)[UPL)[E#N>5)%
Indicators:
Frequency Response:
1PXFS-&%
"DUJWJUZ-&%
)[UPL)[E#
Protection:
"$MJOFGVTFFYUFSOBM
THD:
BUL)[SBUFEPVUQVU
S/N Ratio:
.BTUFS7PMVNF.JOE#
.BTUFS7PMVNF.BYE#
Tone Controls:
#BTTE#BU)[
5SFCMFE#BUL)[
Contour:
E#BU)[
E#BUL)[
Connectors:
1(.JOQVUCSJEHF*O0VU"69PVU3$"QIPOPKBDL
1PSUTDBSEFEHFDPOOFDUPS
PINPVUQVUTDSFXUFSNJOBMT
.VUJOHTDSFXUFSNJOBMT
"$MJOFDPSE4+5QSPOH
"$PVUMFUQSPOH
Power Consumption:
%PNFTUJD7"$)[XBUUT
&YQPSU7"$)[XBUUT
Dimensions:
)Y8Y%
Inputs:
&JHIUJOQVUQPSUTFBDIBDDFQUJOHBOZJOQVUPVUQVU
NPEVMFPOFEFEJDBUFEQSPHSBNJOQVUEVBM3$"
QIPOPKBDLT
CSJEHFJOPVU
Weight:
Input Sensitivity:
#MBDL
1PSUTN7!,0INT
#SJEHF*O0VUN7,0INT
1(.*ON7!,0INT
Other Features:
MCT
Color:
0VUQVUEJTDPOOFDUFEGPSTFDPOETBGUFSQPXFSPO
Outputs:
.BJOE#V!0INTCBMBODFE
"69E#V!,0INTVOCBMBODFE
MMA 800T - Pg. 2
13 August 2005
05/2011
MMA™ 8752
The MMA™ 81502 and 8752 are high-quality‚ industrial-grade audio mixer/amplifiers. Designed for
flexibility in application‚ these mixer/amps represent the latest‚ state-of-the-art technology in mixer/
amplifier design. Powerful‚ yet easy to use‚ the MMA series delivers amazing sonic performance. Lownoise design and features applicable to “real world” situations make these units ideal for audio applications where a powerful‚ compact mixer/amplifier with multiple inputs and outputs are required.
Features:
• Nine channel mixer/power amplifier system
• Eight input ports accept MMA™ plug-in modules
• Dedicated program input
• High and low EQ controls
• Switchable low cut filter
• External volume control capability
• Two mute buses
• Preamp output/power amp input patch capability
• Front panel master level control
• Short circuit and thermal protection
• SPS™ (Speaker Protection System) circuitry with indicator
• Optional rack-mounting with included rack ears
Applications:
• Presentation rooms
• Board rooms
• Court rooms
• Auditoriums
• Lecture halls
• Meeting rooms
• Paging systems
MMA™ 8752
Rated output power:
Output regulation:
Frequency response (Power Amplifier):
Frequency response (Pre-amplifier):
THD:
Power bandwidth:
Signal/Noise:
Outputs:
Input sensitivity:
Tone controls:
Power requirements:
Dimensions w/ rack ears no feet:
Dimensions w/o rack ears w/feet:
Weight:
13 August 2005
05/2011
80305085
75 Watts
Direct out: ± 0.5 dB, Transformer out: ±1.0 dB
±0.5 dB, 20 Hz to 20 kHz, direct out
±1.0 dB, 50 Hz to 20 kHz, transformer out
±1.0 dB, 20 Hz to 20 kHz
Power amplifier: 0.05% (1 kHz), Transformer out: 0.10% with
nominal gain settings
Direct out: 10 Hz to 70 kHz, Transformer out: 30 Hz to 40 kHz
(22 Hz - 22 kHz) typical, All controls CCW: 100 dB
All controls nom.: 95 dB, Master level Max: 77 dB
Direct out: 4 Ohms; Transformer isolated: 8 Ohms, 25 V, 70 V,
100 V; Pre out: 1 V nom; +21 dBu max. at 100 Ohms;
Bridge In/Out: 100 mV at 3.3 k Ohms
Program in: 100 mV at 10 k Ohms; Bridge In/Out: 100 mV at
3.3 k Ohms; Program in: 1 Volt at 20 k Ohms
Low EQ: ±10 dB at 100 Hz, High EQ: ±10 dB at 10 kHz
180 Watts, 120 VAC, 60 Hz
3.45” H x “ 19.00” W x 13.25”D (88 mm x 483 mm x 337 mm)
4” H x “ 17.00” W x 13.25” D (102 mm x 432 mm x 337 mm)
25.0 lbs. (11.4 kg)
MMA™ 81502
The MMA™ 81502 and 8752 are high-quality‚ industrial-grade audio mixer/amplifiers. Designed for
flexibility in application‚ these mixer/amps represent the latest‚ state-of-the-art technology in mixer/
amplifier design. Powerful‚ yet easy to use‚ the MMA series delivers amazing sonic performance. Lownoise design and features applicable to “real world” situations make these units ideal for audio applications where a powerful‚ compact mixer/amplifier with multiple inputs and outputs are required.
Features:
• Nine channel mixer/power amplifier system
• Eight input ports accept MMA™ plug-in modules
• High and low EQ controls
• Switchable low cut filter
• Two mute buses
• Preamp output/power amp input patch capability
• Front panel master level control
• Short circuit and thermal protection
Applications:
• Board rooms
• Court rooms
• Auditoriums
• Lecture halls
• Meeting rooms
• Paging systems
MMA™ 81502
Rated output power:
Output regulation:
Frequency response (Power Amplifier):
Frequency response (Pre-amplifier):
THD:
Power bandwidth:
Signal/Noise:
Outputs:
Input sensitivity:
Tone controls:
Power requirements:
Dimensions w/ rack ears no feet:
Dimensions w/o rack ears w/feet:
Weight:
13 August 2005
05/2011
80305084
150 Watts
Direct out: ± 0.5 dB, Transformer out: ±1.0 dB
±1.0 dB, 20 Hz to 20 kHz
Power amplifier: 0.05% (1 kHz), Transformer out: 0.10% with
nominal gain settings
Direct out: 10 Hz to 70 kHz, Transformer out: 30 Hz to 40 kHz
(22 Hz - 22 kHz) typical, All controls CCW: 100 dB
All controls nom.: 95 dB, Master level Max: 77 dB
Direct out: 4 Ohms; Transformer isolated: 8 Ohms, 25 V, 70 V,
(120 V); Pre out: 1 V nom; +21 dBu max. at 100 Ohms;
Bridge In/Out: 100 mV at 3.3 k Ohms
Program in: 100 mV at 10 k Ohms; Bridge In/Out: 100 mV at
3.3 k Ohms; Program in: 1 Volt at 20 k Ohms
Low EQ: ±10 dB at 100 Hz, High EQ: ±10 dB at 10 kHz
300 Watts, 120 VAC, 60 Hz
3.45” H x “ 19.00” W x 13.25”D (88 mm x 483 mm x 337 mm)
4” H x “ 17.00” W x 13.25” D (102 mm x 432 mm x 337 mm)
25.0 lbs. (11.4 kg)
WMA™ 150
The WMA 150 is a high quality, commercial grade wall-mount mixer/amplifier. Designed for unmatched
application flexibility with an array of optional plug in modules, allowing the system to be tailor-made
for specialized installations.
Powerful, yet easy to use, the WMA series delivers amazing sonic performance. Low-noise design and
features applicable to “real-world” situations make these units ideal for audio applications where a wallmount powered mixer with multiple input and output capabilities are required.
Features:
• Back box optional
• Eight-channel mixer
• 150 Watt integral amplifier
• Seven configurable module ports
• 100 V (export), 70 V, 25 V, 8 or 4 ohm loads
• SPS™ protection circuitry
• Variable threshold compressor
• Nine-band graphic equalizer
• Flush or surface mounting
• UL & CE approved
WMA™ 150
Type:
Output power:
Power bandwidth:
Frequency response:
Total harmonic distortion:
Signal to noise ratio:
Inputs:
Input sensitivity:
Outputs:
Output regulation:
Equalization:
Filters:
Controls:
Indicators:
Protection:
Connectors:
Power consumption:
Dimensions (HxWxD):
Color:
Wall mounting 8 channel mixer/amplifier
150W RMS
20Hz - 20kHz, <0.5% THD (direct); 50Hz - 20kHz, <0.5% THD XFMR
20Hz to 20kHz, +/- 1 dB direct; 20Hz to 20kHz, +/- 3 dB XFMR
0.05% @ 1kHz rated power
Master vol. min. 95 dB; Master vol. max. 77 dB
Seven input ports, one dedicated program input, one bridge input/output
Ports 1-7 and program input: 100 mV @ 10k Ohms; Bridge input/output: 100
mV @ 3.3k Ohms
Direct output (unbalanced): 4 Ohms; Transformer outputs (balanced): 8 Ohms
25V, 70V, 1 Vrms @600 Ohms
<0.5 dB direct; <1.0 dB transformer
9-band ISO one octave graphic: Center freqencies - 63, 125, 250, 1k, 2k, 4k,
8k, 16kHz; Equalizer range: +/- 12 dB
High pass: 180Hz, 12 dB/octave; Low pass: 7kHz, 12 dB/octave
8 input gain, 1 master, 1 EQ defeat, 1 HP filter, 1 LP filter, 9 EQ, 1 compression
1 power LED (red), 1 overload/compression (yellow)
Internal current limiting, built in SPS™, output relays, 1 line fuse (external), 2
internal fuses
Bridge input/output, Program in, Mute, external volume control; screw terminals Ports 1-7, card edge connectors; Ouputs: screw terminals; AC power: SJT,
3 conductor
AC 120V, 60Hz, 400 Watts
25 13/32 x 1413/3 x 4 7/8
Gray
13 August 2005
05/2011
80301533
MMA™ MODULAR MIXER PLUG-IN MODULES
"69
"6943
#5.4
-JOF-FWFM
*OQVU
-JOF-FWFM
*OQVU
-JOF-FWFM
*OQVU
t3$"TDSFX
UFSNJOBM
DPOOFDUPS
t.VUFTMBWF
t/PNVUF
t4DSFXUFSNJOBM
DPOOFDUPS
t&YUFSOBM
SFNPUFDPOUSPM
t.VUFTMBWF
t/PNVUF
.1&4
.JD*OQVU
t4DSFXUFSNJOBM
DPOOFDUPS
t1IBOUPNQPXFS
t.VUFNBTUFS
CVTBOE
t.VUFTMBWF
CVTBOE
t/PUFNVUF
t&MFDUSPOJDBMMZCBMBODFE
t4DSFXUFSNJOBM
DPOOFDUPS
t.VUFTMBWF
t/PNVUF
t5SBOTGPSNFS
CBMBODFE
.1&9
.154
.1543
t9-3DPOOFDUPS
t1IBOUPNQPXFS
t.VUFNBTUFSCVTBOE
t.VUFTMBWF
t/PNVUF
t&MFDUSPOJDBMMZCBMBODFE
t4DSFXUFSNJOBMDPOOFDUPS
t1IBOUPNQPXFS
t.VUFNBTUFS
t.VUFTMBWF
t/PNVUF
t&2
t5SBOTGPSNFSCBMBODFE
t4DSFXUFSNJOBMDPOOFDUPS
t1IBOUPNQPXFS
t&YUFSOBMSFNPUFDPOUSPM
t.VUFTMBWF
t/PNVUF
t5SBOTGPSNFSCBMBODFE
.JD*OQVU
.JD*OQVU
.159
01.
t5SBOTGPSNFSCBMBODFEJOQVU
t4DSFXESJWFSBEKVTUBCMFQSFBNQHBJO
t4FMFDUBCMF7%$QIBOUPNQPXFS
t.VUF.BTUFSGVODUJPOTFMFDUBCMF
CFUXFFOUXPNVUFCVTFT
t.VUF4MBWFGVODUJPOTFMFDUBCMF
CFUXFFOUXPNVUFCVTFT
t.VUF4MBWFJOWFSTJPOGVODUJPO
t%SJWFTPòNJYCVTPS
FYUFSOBMJOQVU
t1SPWJEFTCPUIXBUUT
JOUPPINTBOE
PINMJOFESJWFS
XJUITFQBSBUFPVUQVU
DPOUSPMT
t&VSPTUZMFJOQVU
DPOOFDUPS
0VUQVU.PEVMF
.JD*OQVU
.JD*OQVU
5.1"VUP
5SBOTGPSNFS.JD1SFBNQMJGJFS
t#BMBODFENJDSPQIPOFMFWFMJOQVU
t4FMFDUBCMFQIBOUPNQPXFS
t4FMFDUBCMFQIBTFJOWFSTF
t4JNQMFPQFSBUJPO
t7BSJBCMFJOQVUTFOTJUJWJUZ
t"EKVTUBCMFHBUFUISFTIPMEXJUISFDFTTFEDPOUSPM
t0VUTUBOEJOHEZOBNJDSBOHFOPJTFBOEEJTUPSUJPO
t&VSPTUZMFJOQVUDPOOFDUPS
1&2.
4&.
51.4
1BSBNFUSJD&2
4JHOBM&OIBODFNFOU
5FMFQIPOF1BHJOH.PEVMF
t5ISFFCBOETPGGVMMQBSBNFUSJDFRVBMJ[BUJPO
tE#CPPTUDVUSBOHF
t'PVSPDUBWFCBOEGSFRVFODZTXFFQ
t8JEFSBOHFPGöMUFSCBOEXJEUI
UPPDUBWF
t0VUTUBOEJOHE#
EZOBNJD
SBOHFOPJTFBOEEJTUPSUJPO
t5XPJOEFQFOEFOUSFDPOöHVSBCMF
JOQVUTBOEPVUQVUT
t3$"DPOOFDUPSGPSMJOFJOBOEUISV
t(FOFSBUFTTVCIBSNPOJDTOPU
QSFTFOUJOUIFTPVSDFNBUFSJBM
GPSMBSHFSUIBOMJGFCBTT
t4QFDJBMMZUVOFECBTTöMUFS
DPNQMFNFOUTUIFTVC
CBTTDJSDVJUSZ
t7PDBMDMBSJUZFOIBODFNFOU
t4VCCBTTBOECBTTBSF
PQUJNJ[FEGPSTUBOEBSE
JOTUBMMBUJPOTQFBLFST
t3$"DPOOFDUPSGPSJOQVUBOEPVUQVU
t4VJUBCMFGPSTNBMMPSMBSHFTQFBLFST
t5SBOTGPSNFSCBMBODFEJOQVU
t4DSFXESJWFSBEKVTUBCMF
QSFBNQHBJOBOEMPXDVUöMUFS
t.VUF.BTUFSGVODUJPO
TFMFDUBCMFCFUXFFOUXP
NVUFCVTTFT
t.VUF4MBWFGVODUJPOTFMFDUBCMF
CFUXFFOUXPNVUFCVTTFT
t.VUF4MBWFJOWFSTJPOGVODUJPO
t4VQQPSUGPS.."™6."™ & WMA™TFSJFTFYUFSOBM
TXJUDIPQUJPO
AUX™ 2 - MMA™ SERIES MODULE
Controls overall
output level of
the module
RCA phono input
jacks
Screw terminal
input panel
+"&
!
,+"% -#
!
&.)
&%+)&#
&*
&,%+"% !$" -! +**" /+-
" !+
+3
"$%*"&%*
2
2
&$'%
'+%)
%")+!0("&*./((.//%"-"-,*"(+#,-+!0 /.
",/&*$/%"./*!-!,&* -!"!$")+!0("
+**" /&+*(&$* -!"!$" +**" /+-1&/%/+,*!
+//+) &- 0&/+-!$0&!".*,)+!0("&*/+ -!
"!$".+ '"/,0.%#(0.%1&/%-"-,*"(*!&*./((
#0-*&.%"!)+0*/&*$. -"1.
"%
/+!
%',+%*"+"-"+/
)/+
!0/+
!0
)(,%/*'&%*
3/+'34!
Aux 2 - Pg. 1
AUX™ 2 - MMA™ SERIES MODULE
+24 VDC
Hot
Gain
Common
Mute
Output
Common
Mute 1
Mute 2
R100
A
g J 100
g
R101
C100
1.5k
+
22R50
J 100
1.5k
B
VR100
50KTRMRA
R102
10k
.1
+ C106
R103
470k
R104
T
10FP
C110
CR102
1N4148
47V50
C105
3
8
+
2 U100
+ 4560
+
22R50
4
R108
470k
C101
R107
12k
C102
CR103
1N4148
100PF
+
+ 22R50
R105
100k
R106
N/C
CR100
6.8k
6534
R109
470k
2N3904
Q100
1N4148
CR101
1N4148
C111
22R50
Q101
R110
10k
R112
C107
R111
1k
.015
R114
1.5k
R113
100k
1.5k
GND
GC
CLIP178
To defeat Mute 1 slave operation, remove CR 100
To defeat Mute 2 slave operation, remove CR 101
Aux 2 - Pg. 2
13 August 2005
05/2011
80304511
AUX™ SR - MMA™ SERIES MODULE
Aux SR - Pg. 1
AUX™ SR - MMA™ SERIES MODULE
Aux SR - Pg. 2
13 August 2005
05/2011
80302207
BTM™-S - MMA™ SERIES MODULE
BTM-S - Pg. 1
BTM™-S - MMA™ SERIES MODULE
BTM-S - Pg. 2
13 August 2005
05/2011
80301266
MPE™ S3/X3 MMA™ SERIES MODULE
The MPE-S3/X3 is an electronically balanced microphone pre-amp module for the MMA Series of Peavey
Architectural Acoustics mixer/amplifiers. The S3 and X3 have screwdriver-adjustable pre-amp gain and
low-cut filter, switchable phantom power, three muting options, and an inverting mute function that mutes
the master mic when no signal is present. The S3 has a Phoenix-style connector for permanent installation
wiring and the X3 has a female XLR connector. The electronic balancing affords a good Common Mode
Rejection Ratio (CMRR) at a low cost for short to medium mic-level cable runs. For extremely long runs,
use the MPT Series of transformer-coupled mic pre-amp modules.
Features:
• Modular construction
• Electronically balanced input circuitry
• Screwdriver adjustable pre-amp gain
• Screwdriver adjustable low-cut filter
• Euro style connector - S3
• XLR connector - X3
• Switchable 24VDC phantom power
• Mute master function selectable between two bute buses
• Mute slave function selectable between two mute buses
• Mute slave inversion to mute a master mic with no signal present
Applications:
• Board rooms
• Court rooms
• Auditoriums
• Lecture halls
• Meeting rooms
• Paging systems
MPE™ S3/X3 MMA™ SERIES MODULE
Audio Specifications:
Frequency response:
Equivalent input noise (EIN):
Input CMRR:
Range of input level for normal out:
Minimum source impedance:
Input impedance:
20Hz - 20kHz, +0/-1 dB
</= 0.05% @ 1kHz
</= -128 dBu
>60 dB 20Hz - 20kHz
Mic input: 0.25 mV to 100 mV; Line input: 2.5 mV to 1 V
150 Ohms
2.2 k Ohms
Control Specifications:
Pre-amp gain control:
Low-cut control:
0 dB to 53 dB (screwdriver adjustable)
Adjustable shelving type, low cut filter w/ a corner freq of 125 Hz
Mute Functions:
Mute master select for mute bus 1 and mute bus 2 (PC board jumper)
Mute slave select for mute bus 1 and mute bus 2 (PC board jumper)
Mute master inversion is used to reverse the slave operation of the module
Phantom Power:
Switchable 24 VDC (PC board jumper)
General Specifications:
Dimensions:
Net weight:
Power consumption:
Finish:
3.07” H x 1.38” W x 3.46” D (77.97mm x 35.05mm x 87.88mm)
2.6 oz. (73.71 g.)
336 mW (14 mA @ 24 VAC) supplied by the MMA Mixer/Amp
Black powder coat painted steel on mounting panel
13 August 2005
05/2011
80304655
MPT™ SR MMA™ SERIES MODULE
The MPT-SR is a transformer balanced microphone pre-amp module for the MMA Series of Peavey Architectural Acoustics mixer/amplifiers. The MPT-SR has a potentiometer with easy to adjust knob for adjusting pre-amp gain, screw terminals for ease of connection, muting, and remote volume capabilities. The
transformer balancing affords a good Common Mode Rejection Ratio (CMRR) at a low cost for extremely
long runs.
Features:
• Transformer balanced input circuitry
• Knob adjustable pre-amp gain
• Screw terminal connector
• Muting function
• Remote volume capability
Applications:
• Board rooms
• Court rooms
• Auditoriums
• Lecture halls
• Meeting rooms
• Paging systems
MPT™ SR MMA™ SERIES MODULE
Gain:
Input sensitivity:
Frequency response:
Equivalent input noise (EIN):
Minimum source impedance:
Load impedance:
Muting level:
Remote volume range:
Phantom power:
Power:
Control:
Mounting:
-4 dB to 51 dB
0.28 mV to 160 mV
30Hz - 20kHz, +0/-1 dB at nominal gain setting
</= 0.1% @ 1kHz with 1 mV input
</= -123 dBu (200 Ohms terminated) 20Hz - 20kHz
200 Ohms
10k Ohms
60 dB
0 to -60 dB
24 VDC
24 VDC
Gain
Edge card connector
Dimensions:
Net weight:
Power consumption:
Finish:
3.07” H x 1.38” W x 3.46” D (77.97mm x 35.05mm x 87.88mm)
2.9 oz. (82.21 g.)
336 mW (14 mA @ 24 VAC) supplied by the MMA Mixer/Amp
13 August 2005
05/2011
80304655
MPT™-S2/X2 MA™ SERIES MODULE
The MPT S2/X2 is a transformer balanced microphone / line level pre-amp module for the MMA™ and
WMA™ (S2 verison only) series of Peavey Architectural Acoustics mixer / amplifiers. The MPT S2/X2
features screwdriver adjustable pre-amp gain and low-cut filter, Euro-style connector (MPT S2) or XLR
(MPT X2) input connector, selectable phantom power, and powerful muting options.
Features:
• Electronically balanced input circuitry
• Screwdriver adjustable pre-amp gain
• Screwdriver adjustable low-cut filter
• Euro style connector
• Switchable 24VDC phantom power
• Mute master function
• Mute slave inversion function
Applications:
• Retail outlets
• Auditoriums
• Gymnasiums
• Paging systems
• Foreground music systems
• Background music systems
• Hotel meeting rooms
• Houses of worship
MPT S2/X2 - Pg. 1
MPT™-S2/X2 MA™ SERIES MODULE
MPT S2/X2 - Pg. 2
13 August 2005
05/2011
OPM™ MMA™ SERIES MODULE
The OPM is a powered output / balanced line ouput module for the MMA™, WMA™, UMA™,
and IPA™ series of Architectural Acoustics mixer / amplifiers. The OPM consists of a 5W power
amplifier and a balanced line amplifier, both driven from either the internal mix signal or external
line-level source. The two signal sources are internally pre-selectable with a slide switch included
with the module. Two separate screwdriver adjustable controls are included that adjust the power
ed and line level outputs. Euro connectors, and an unbalanced RCA line input round out the
features of the OPM module. The electronic balancing affords a good Common Mode Rejection
Ratio (CMRR) at a low cost for short to medium cable runs.
Features:
• 5W into 4 Ohm power amplifier
• Economical electronically balanced line output
• Screwdriver adjustable line output gain
• Euro ouput connector
• RCA unbalanced external line input
• Thermal protection at the power output
Applications:
• Retail outlets
• Board rooms
• Court rooms
• Auditoriums
• Lecture halls
• Meeting rooms
• Paging systems
OPM™ MMA™ SERIES MODULE
Nominal Load Resistance:
Nominal Output Level:
Frequency Response:
Line output 600 Ohms; Power output 4 Ohms
Line output 1 Vrms (0 dBV); Power output 4.5 Vrms (5W @ 4Ohms)
Line ouput 16 Vrms (+24dBV); Power output 5.5 Vrms (7.5W @ 4 Ohms)
Line output +0/-1 dB, 20Hz - 20kHz
Power output +0/-7 dB, 20Hz - 20kHz @ 4 Ohms
THD:
Line output <0.05% @ 1kHz , and nominal output level
Power output <0.3% @ 1kHz , and nominal output level
</= -86 dB Ref: Nominal output levels
Line Input Sensitivity:
</= -76 mV for nominal output levels, gain @ max
Line Input Resistance:
>/= 20k Ohms
Maximum Available Gain (gain/dB): Line output 10/20; Power output 66/36
Dimensions:
Net weight:
Power consumption:
Finish:
Input Selector Switch:
3.07” H x 1.4” W x 3.6” D (77.97mm x 35.5mm x 91.5mm)
3.53 oz. (100 g.)
15 W (600 mA @ 24 VAC) supplied by the MMA Mixer/Amp
UP - External RCA line input
DOWN - Internal mix input
13 August 2005
05/2011
80304655
PEQM™ MMA™ SERIES MODULE
The PEQM is a single-channel, three-band parametric equalizer for the MMA or WMA Series
modular audio products. The PEQM features three individual parametric filters, each with adjustable frequency, bandwidth and level. In addition, a separate bypass switch for each filter allows
maximum audio performance. Easy connectivity with a removable Euro connector and RCA jack
make the PEQM perfect for fixed installations. Among the many features of the PEQM is a versatile audio routing system allowing multiple variations of audio signal flow through the module
and to the mix bus of the MMA or WMA system. The module installs easily into two module
slots of the MMA or WMA Series products, making it a perfect addition for any sound system
application.
Features:
• 3 bands of fully parametric EQ
• +/- 15dB boost/cut range
• 4 octave band frequency sweep
• Wide range of filter bandwidth 0.1 to 1 octave
• Individual bypass switches for each frequency
• 120 dB dynamic range
• 2 independent, configurable inputs and outputs
• RCA connsctor for line in and thru
Applications:
• Retail outlets
• Auditoriums
• Gymnasiums
• Paging systems
PEQM - MMA Series Module - Pg. 1
PEQM™ MMA™ SERIES MODULE
Gain (Line/RCA):
Input/Outputs:
Nominal Input/Output Levels:
Maximum Input/Output Level:
Band-pass Filter Section:
Frequency Range:
THD+N:
Frequency Response:
SNR (Line I/O):
Dynamic Range:
0 dB (all controls at center position)
Unbalanced (3-pin Euro/RCA internally jumper configurable)
0 dBV (1 V)
+16 dBV (RL = 600 Ohms)
Boost/Cut Range:+/-15 dB, Bandwidth: 0.1 to 1 octaves (Q = 15 to 1.5)
Band 1: 40 - 800 Hz, Band 2: 200 - 4,000 Hz, Band 3: 1,000 - 20,000 Hz
<0.001% (1 kHz @ 0 dBV, 22 kHz BW)
<0.004% (1 kHz @+16 dBV/600 Ohms, 22 kHz BW)
<0.05% (20Hz-20kHz @+16dBV/600 Ohms, 80kHz BW)
10 - 200,000 Hz (+0/-2 dB) (All level controls at center position)
-108 dBV (Bypass, 22 kHz BW)
-104 dBV (22 kHz BW, All level controls center position)
-90 dBV (22 kHz BW, All level controls max, BW = max: worst case)
120 dB
Power Requirements:
Dimensions (H x W x D):
Finish:
24 V/70 mA (1.7 W) (supplied by MMA/WMA product)
3.07” x 2.8” x 3.3” (78 mm x 71 mm x 84 mm)
Black powder-coat painted steel on mounting panel
PEQM - MMA Series Module - Pg. 2
13 August 2005
05/2011
80304655
SEM™ - MMA™ SERIES MODULE
The SEM is a single-channel signal enhancement system for the MMA™, WMA™, UMA™, and IPA™ series
of Peavey Architectural Acoustics mixer/amplifiers. The SEM consists of specially designed (patent pending)
signal processing circuits that improve clarity and low frequency response, effectively causing small speakers to
sound like much larger ones. Three screwdriver adjustable controls are provided to set the amount of the generated sub-harmonic bass, the customtuned bass filter, and the high frequency expansion. All functions
have been optimized to work with small speakers, but low frequency reproduction will be improved when
speakers with good bass response are used.
Features:
• Generates sub-harmonics not present in the source material for larger than life bass
• Specially tuned bass filter complements the sub-bass circuitry.
• Vocal clarity enhancement
• Sub bass and bass are optimized for standard installation speakers
• RCA connector for input and output
• Suitable for small or large speakers
Applications:
• Retail outlets
• Board rooms
• Court rooms
• Auditoriums
• Lecture halls
• Meeting rooms
• Paging systems
SEM™ - MMA™ SERIES MODULE
Gain:
Input/output connectors:
Nominal Input / Output Level:
Maximum Input / Output Level:
Frequency Response:
THD+N:
Input Impedance:
Ouput Impedance:
0 dB (all controls minimum)
Unblanaced RCA
0 dBV (1Vrms)
+17 dBV (7.4 Vrms) RL=600 Ohms
Process Controlled
.015% @ 1kHz, nominal output level
-90 dB nominal output levels, controls set min
10k Ohms
100 Ohms
Dimensions:
Net weight:
Power Requirements:
Finish:
3.07” H x 1.4” W x 3.6” D (78mm x 35.5mm x 92mm)
2.9 oz. (82.21 g.)
+24 VDC @ 48 mA (1.15W) supplied by host unit
13 August 2005
05/2011
80305032
TMP™ AUTO- MMA SERIES MODULE
The TMP-Auto is a modular, transformer-balanced microphone preamplifier with integral automatic
gating functionality. Designed specifically for the popular MMA, UMA and WMA Series modular
mixing systems, the TMP-Auto is perfect for fixed installations where simple, cost-effective automatic
mixing is required. The TMP-Auto provides jumpers for phantom power and the option to configure
the TMP-Auto for line-level operation. Tamper-resistant, adjustable gate threshold and input gain controls are among the many features included. The module installs easily into a single slot of the MMA,
UMA or WMA Series products, making it a perfect addition for any sound system application.
Features:
• Variable input sensitivity w/screwdriver control
• Adjustable gate threshold w/recessed control
• Balanced microphone level input
• Selectable phantom power
• Selectable phase inverse
• Easy installation
• Simple operation
• Supports all Peavey modular audio frames
• Excellent overall specifications
• Outstanding dynamic range, noise and distortion
Applications:
• Retail outlets
• Auditoriums
• Gymnasiums
• Paging systems
• Conference centers
• Civic centers
TMP™ AUTO - MMA SERIES MODULE
Gain:
Input Sensitivity:
Frequency Response:
EIN:
Distortion:
Source Impedance:
Load Impedance:
Muting:
Attenuation (Slave Mode):
Phantom Power:
Control:
Mounting:
Power Requirements:
Dimensions (H x W x D):
Weight:
Finish:
Mic: 6 - 41 dB (adjustable), Line: (-14) - 31 dB (adjustable)
Mic: .28 mV - 45 mV nominal
+/-1 dB, 20 Hz to 20 kHz
-123 dBu (20 Hz - 20 kHz), 150 ohms terminated
<0.1% with 1 mV input, (1 kHz)
150 ohms
10 k Ohms
Mute Master or Mute Slave, selectable
55 dB
24 VDC, defeatable
Gain, Threshold
Edge card connector, Rear panel screws
24 V/10 mA (.240 W) supplied by MMA/UMA/WMA product
3.07” x 2.8” x 3.3” (78 mm x 71 mm x 84 mm)
2.9 oz.
Black powder-coat painted steel on mounting pan
13 August 2005
05/2011
80304511
TPM™ S2 - MMA SERIES MODULE
The TPM-S2 is a transformer-balanced line level preamp module for the MMA™, UMA™ and
WMA™ Series of Peavey Architectural Acoustics mixer/amplifiers. Designed specifically for telephone paging applications, the TPM-S2 features screwdriver-adjustable preamp gain and low cut filter,
Euro-style input connector and powerful muting options.
Features:
• Transformer-balanced input
• Screwdriver-adjustable preamp gain
• Screwdriver-adjustable low cut filter
• Euro-style input connector
• Mute Master function selectable between two mute
busses
• Mute Slave function selectable between two mute
busses
• Mute Slave inversion function
• Support for MMA, UMA & WMA series external
switch option
Applications:
• Retail outlets
• Auditoriums
• Gymnasiums
• Paging systems
• Conference centers
• Civic centers
TPM™ S2 - MMA SERIES MODULE
Frequency Response:
Total Harmonic Distortion (1kHz):
Input CMRR:
Input Level for Normal Output (100mV):
Minimum Source Impedance:
Input Impedance:
Mute Attenuation:
+0/-1 dB 20 Hz to 20 kHz
74 dB (min. gain setting)
<0.05%
>60 dB, 20 Hz - 20 kHz
8mV - 1V, Line input
150 Ohms
2.2k Ohms
55 dB
Control Specifications:
Gain:
Low Cut Filter:
-20 dB to 20 dB
Adjustable shelving type, low cut filter with a corner (-3 dB)
frequency of 125Hz (6 dB per octave)
Mute Master select for Mute Bus 1 and Mute Bus 2 (PC board
jumper), Mute slave select for Mute Bus 1 and Mute Bus 2 (PC
board jumper), Mute slave inversion is used to reverse the slave
operation of the module (See “Inverting Slave Mode” on the
back page)
Mute Functions:
Dimensions (HxWxD):
Net Weight:
Power Consumption:
3.07” x 1.38” x 3.46” (77.97 mm x 35.05 mm x 87.88 mm)
2.6 oz. (4.55 g)
336 mW (14 mA @24V DC) supplied by the MMA, UMA or
WMA series mixer/amplifier.
Black powder-coat painted steel on mounting panel
Finish:
13 August 2005
05/2011
80304511
UMA™ SERIES
UTILITY MIXER / AMPLIFIERS
JB6&*%'&*%"LViiB^mZg$
JB6,*',*"LViiB^mZg6bea^ÄZg
JB6(*'(*"LViiB^mZg$6bea^ÄZg
Our UMA™ series offers cost-effective solutions for small- to medium-sized jobs, but can also head up a section of a larger job.
Everything you’ll need is included—microphone inputs, telephone page, program inputs and now even a plug-in module port
for use with any single-space MMA™ module.
t6QUPöWFJOQVUDIBOOFMT
t0OFFMFDUSPOJDBMMZCBMBODFE.JD5FMJOQVUoUFMFQIPOFJOQVUXJUI
PINTUSBOTGPSNFSCBMBODFEGPSQBHJOH
t0OFFMFDUSPOJDBMMZCBMBODFE.JD-JOFJOQVU
t5XPFMFDUSPOJDBMMZCBMBODFE-JOFJOQVUT
t0OFQMVHJONPEVMFQPSUBMMPXTGPSBOZTJOHMFTQBDF.."
NPEVMF
t3FBSQBOFMJOQVUMFWFMDPOUSPMGPSPQUJPOBM.."JOQVUNPEVMF
t1SJPSJUZ.VUJOHTZTUFNXJUIJOUFSOBMTJHOBMPWFSSJEFFYUFSOBM
TXJUDIDMPTVSFDBQBCJMJUZUISFTIPMEDPOUSPMBOEGSPOUQBOFM
JOEJDBUPST
t$IBOOFMFMFDUSPOJDBMMZCBMBODFEPVUQVUQSPWJEFTOPONVUBCMF
PVUQVUGPS.0)
t4144QFBLFS1SPUFDUJPO4ZTUFN
DJSDVJUSZXJUIJOEJDBUPS
tPINEJSFDUPVUQVU
tPINWPMUBOEWPMUUSBOTGPSNFSCBMBODFEQPXFS
PVUQVUT
t"$DPOWFOJFODFPVUMFUWPMUVOJUTPOMZ
t0QUJPOBMSBDLNPVOUJOHSBDLFBSTJODMVEFE
t$&BQQSPWFE
JB6(*'>iZbCjbWZg/%%)*,%)%
JB6,*'>iZbCjbWZg/%%)*,%*%
JB6&*%'>iZbCjbWZg/%%)*,%+%
JB6b^mZg$Vbeh]VkZVbdYjaZedgi[dgZmigVkZghViâîn#
6.
8BUU.JYFS"NQMJöFS
tXBUUPVUQVU
t&MFDUSPOJDBMMZCBMMJOFJOQVU
t77PSȰPVUQVUT
t"EKVTUBCMFNVUJOHPGUIFMJOFJOQVU
t5SBOTGPSNFSCBMNJDQBHFJOQVU
Item Number: 00332000
J6(*I>>
(*"LViiB^mZg$6bea^ÄZg
tXBUUPVUQVU
t77PSȰPVUQVUT
t-FWFMTFOTJOHNVUJOHPGUIFBVYJOQVU
t.JDQBHFUFMFQIPOFJOQVU
t8BMMNPVOUDIBTTJT
t3$"PSTDSFXUFSNJOBMBVYJOQVU
Model
Frequency Response
Input Sensitivity
THD + N
Output Power
Dimensions and Weight
Agency Approvals
Operating Voltage
UMA™ 352
20 Hz to 20 kHz ±0.5 dB
direct out
Mic 1 mV, Tel 100 mV
Line 100 mV
0.05%
35 Watts RMS
3.45” H x 19” W x 13.25” D
(20 lbs)
UL, CE, CUL
120/240
UMA 752
20 Hz to 20 kHz, ±0.5 dB
direct out
Line 100 mV
0.05%
75 Watts RMS
3.45” H x 19” W x 13.25” D
(23.8 lbs)
UL, CE, CUL
120/240
UMA 1502
20 Hz to 20 kHz, ±0.5 dB
direct out
Line 100 mV
0.05%
150 Watts RMS
3.45” H x 19” W x 13.25” D
(27.1 lbs)
UL, CE, CUL
120/240
UM™ 10
50 Hz to 20 kHz, ±1.0 dB
Mic 1 mV, Page100 mV
Program 125 mV
0.5%
10 Watts RMS
3.5” H x 10.2” W x 7.25” D
(9.1 lbs)
UL, CUL
120
UA 35T II
50 Hz to 20 kHz, ±0.5 dB
XFMR Output
Mic 1 mV, Page 120 mV
Aux 100 mV
<0.2%
35 Watts RMS
4.25” H x 8.25” W x 13.625” D
(11.5 lbs)
UL, CUL
120
UMA™ 1502
The UMA 1502 is a high quality, commercial grade analog audio mixer/amplifier. Designed for flexibility in application, these mixer/amps represent the latest, state-of-the-art technology in analog circuit
design.
Powerful, yet easy to use, the UMA series delivers amazing sonic performance. Low-noise design and
features applicable to “real-world” situations make these units ideal for audio applications where a compact, powered mixer with multiple input and output capabilities are required.
Features:
• Up to five input channels
• One electronically-balanced Mic/Tel input – telephone input with 600 Ohms transformer-balanced
• One electronically-balanced Mic/Line input
• Two electronically-balanced Line inputs
• One plug-in module port allows for any single-space MMA™ module
• Rear-panel input level control for optional MMA input module
• Channel 4 electronically-balanced output provides non-mutable output for MOH
• 4 Ohm direct output
• 8 Ohm, 70 Volt, and 100 Volt transformer-balanced power outputs
• AC convenience outlet (120 Volt units only)
Applications:
• Board rooms
• Courtrooms
• Auditoriums
• Lecture halls
• Meeting rooms
• Convention Centers
• Paging systems
• Background music
• Retail spaces
• Restaurants
UMA™ 1502
Rated output power:
Output regulation:
Frequency Response Power Amplifier:
Frequency Response Pre-Amplifier:
THD:
Power bandwidth (±3 dB):
Signal/noise (22 Hz — 22 kHz) typical:
Outputs:
Inputs:
Tone controls:
Front panel controls and indicators:
Rear panel controls:
Muting:
Power requirements:
Dimensions:
Weight:
Color:
13 August 2005
05/2011
80303077
150 Watts
Direct out: <0.5 dB; Transformer out: <1.0 dB
±1.0 dB, 20 Hz to 20 kHz
Power Amplifier: 0.05% (1 kHz); Preamplifier: 0.10% with nominal gain settings
Direct out: <10 Hz to 70 kHz; Transformer out: 30 Hz to 40 kHz
All controls CCW: -100 dB; All controls nominal (5): -90 dB; Level controls CCW
and master level CW: -80 dB
Direct out: 4 Ohms; XFMR: Balanced 8 Ohms (25 V), 70 V, 100 V; Ch. 4 out: 1 V
nom., +21 dBu max. at 100 Ohms; Pre out: 1 V nom.; +21 dBu max., at 100 Ohms
Channel 1: Mic 1 mV at 1.8 k Ohms (XLR or screw terminals) Tel 100 mV at 20 k
Ohms (Screw terminals)
Channel 2: Mic 1 mV at 1.8 k Ohms (Screw terminals) Line 100 mV at 20 k Ohms
(Screw terminals)
Channel 3: Line 100 mV at 20 k Ohms (Screw terminals)
Channel 4: Line 100 mV at 20 k Ohms (Screw terminals), Stereo 316 mV (-10 dBV)
at 4.0 k Ohms (RCA jacks)
Power in: 1 Volt at 20 k Ohms
Bass: ±10 dB at 100 Hz; Treble: ±10 dB at 10 kHz
Channel 1 level control, Channel 2 level control, Channel 3 level control,
Channel 4 level control, Bass control, Treble control, Master level control, Input
channel signal level indicators: (signal presence = green; signal peak = red),
Input channel mute status, Power amplifier signal presence indicator, SPS™ indicator,
Power on indicator
Module input level control use with MMA input modules only, Channel 1 sensitivity
switch, Channel 1 mute bus assign switch, Mute 2 threshold control,
Channel 2 sensitivity switch, Channel 2 mute bus assign switch, Channel 4 output
level control, Loop switch, Power switch
Mute 1: MMA input module overrides Ch 1 through 4, Mute 2: Ch 1 overrides Ch 2
through 4 with adjustable threshold control range from OFF to 100 mV (TEL) or 1
mV (MIC)
300 Watts, 120 V AC, 60 Hz
19” x 13.25” x 3.45” with rack ears (483 mm x 337 mm x 88 mm)
17” x 13.25” x 3.45” without rack ears (432 mm x 337 mm x 88 mm)
27.1 lbs. (12 kg)
Black
UMA™ 352
The UMA 352 is a high quality, commercial grade analog audio mixer/amplifier. Designed for flexibility
in application, these mixer/amps represent the latest, state-of-the-art technology in analog circuit design.
Features:
Applications:
• Board rooms
• Courtrooms
• Auditoriums
• Lecture halls
• Meeting rooms
• Paging systems
• Retail spaces
• Restaurants
UMA 352 - Pg. 1
UMA™ 352
4QFDJGJDBUJPOT
3BUFEPVUQVUQPXFS8BUUT
0VUQVUSFHVMBUJPO
%JSFDUPVU
<E#
5SBOTGPSNFSPVU <E#
'SFRVFODZSFTQPOTF
1PXFS"NQMJGJFS E#)[UPL)[
EJSFDUPVU
E#)[UPL)[
USBOTGPSNFSPVU
1SFBNQMJGJFS
E#)[UPL)[
5)%
1PXFS"NQMJGJFS
1SFBNQMJGJFS
1PXFSCBOEXJEUI
%JSFDUPVU
5SBOTGPSNFSPVU
L)[
XJUIOPNJOBMHBJO
TFUUJOHT
<)[UPL)[
)[UPL)[
4JHOBMOPJTF
)[±L)[
UZQJDBM
"MMDPOUSPMT$$8
E#
"MMDPOUSPMTOPNJOBM
E#
-FWFMDPOUSPMT$$8BOENBTUFSMFWFM$8
E#
0VUQVUT
%JSFDUPVU
9'.3
$IPVU
1SFPVU
*OQVUT
$IBOOFM
$IBOOFM
$IBOOFM
$IBOOFM
1PXFSJO
0INT
#BMBODFE0INT
77
7OPNE#VNBY
BU0INT
7OPNE#VNBY
BU0INT
.JDN7BUL0INT
9-3PSTDSFXUFSNJOBMT
5FMN7BUL0INT
4DSFXUFSNJOBMT
.JDN7BUL0INT
4DSFXUFSNJOBMT
-JOFN7
BUL0INT
4DSFXUFSNJOBMT
-JOFN7
BUL0INT
4DSFXUFSNJOBMT
-JOFN7
BUL0INT
4DSFXUFSNJOBMT
4UFSFPN7
E#7
BU
L0INT
3$"KBDLT
7PMUBUL0INT
5POFDPOUSPMT
#BTT
5SFCMF
E#BU)[
E#BUL)[
'SPOUQBOFMDPOUSPMTBOEJOEJDBUPST
$IBOOFMMFWFMDPOUSPM
$IBOOFMMFWFMDPOUSPM
$IBOOFMMFWFMDPOUSPM
$IBOOFMMFWFMDPOUSPM
#BTTDPOUSPM
5SFCMFDPOUSPM
.BTUFSMFWFMDPOUSPM
*OQVUDIBOOFMTJHOBMMFWFMJOEJDBUPST
TJHOBMQSFTFODFHSFFOTJHOBMQFBL
SFE
*OQVUDIBOOFMNVUFTUBUVTJOEJDBUPST
1PXFSBNQMJGJFSTJHOBMQSFTFODF
JOEJDBUPS
414 JOEJDBUPS
1PXFSPOJOEJDBUPS
3FBSQBOFMDPOUSPMT
.PEVMFJOQVUMFWFMDPOUSPM6TFXJUI
.." JOQVUNPEVMFTPOMZ
$IBOOFMTFOTJUJWJUZTXJUDI
$IBOOFMNVUFCVTBTTJHOTXJUDI
.VUFUISFTIPMEDPOUSPM
$IBOOFMTFOTJUJWJUZTXJUDI
$IBOOFMNVUFCVTBTTJHOTXJUDI
$IBOOFMPVUQVUMFWFMDPOUSPM
-PPQTXJUDI
1PXFSTXJUDI
.VUJOH
.VUF.."JOQVUNPEVMFPWFSSJEFT
$IUISPVHI
.VUF$IPWFSSJEFT$IUISPVHI
XJUIBEKVTUBCMFUISFTIPMEDPOUSPMSBOHF
GSPN0''UPN75&-
PSN7.*$
0UIFSGFBUVSFT
3FNPUFWPMVNFDPOUSPM37$
WJBTDSFX
UFSNJOBMT
L0INTBQQSPYJNBUFMZE#
BUUFOVBUJPO
L0INTBQQSPYJNBUFMZE#
BUUFOVBUJPO
.VUFBOENVUFCVTBDUJWBUJPOXJUI
TXJUDIDPOUBDUDMPTVSFWJBTDSFX
UFSNJOBMT
7%$ QIBOUPNQPXFSPO.*$JOQVUT
%JNFOTJPOT
YYXJUISBDLFBST
NNYNNYNN
YYXJUIPVUSBDLFBST
NNYNNYNN
8FJHIU
MCTLH
$PMPS
#MBDL
'FBUVSFT
6QUPGJWFJOQVUDIBOOFMT
0OFFMFDUSPOJDBMMZCBMBODFE.JD5FM
JOQVU°UFMFQIPOFJOQVUXJUI0IN
USBOTGPSNFSCBMBODFEGPSQBHJOH
0OFFMFDUSPOJDBMMZCBMBODFE.JD-JOF
JOQVU
5XPFMFDUSPOJDBMMZCBMBODFE-JOFJOQVUT
0OFQMVHJONPEVMFQPSUBMMPXTGPSBOZ
TJOHMFTQBDF.." NPEVMF
3FBSQBOFMJOQVUMFWFMDPOUSPMGPS
PQUJPOBM.."JOQVUNPEVMF
1SJPSJUZ.VUJOHTZTUFNXJUIJOUFSOBM
TJHOBMPWFSSJEFFYUFSOBMTXJUDIDMPTVSF
DBQBCJMJUZUISFTIPMEDPOUSPMBOEGSPOU
QBOFMJOEJDBUPST
.VUF#VT"DUJWF%FGFBUTXJUDIFTPO
UXPDIBOOFMT
3FNPUFWPMVNFDPOUSPMDBQBCJMJUZ
#BTTBOEUSFCMFFRVBMJ[BUJPODPOUSPMT
1SFBNQPVUQVUBOEQPXFSBNQJOQVU
MPPQGPSFYUFSOBMQSPDFTTJOHFRVJQNFOUPS
BVYJMJBSZPVUQVU
$IBOOFMFMFDUSPOJDBMMZCBMBODFE
PVUQVUQSPWJEFTOPONVUBCMFPVUQVUGPS
.0)
'SPOUQBOFMDIBOOFMJOQVUTJHOBMMFWFM
JOEJDBUPST
"NQMJGJFSTJHOBMJOEJDBUPS
414 4QFBLFS1SPUFDUJPO4ZTUFN
DJSDVJUSZXJUIJOEJDBUPS
1PXFSJOEJDBUPS
0INEJSFDUPVUQVU
0IN7PMUBOE7PMU
USBOTGPSNFSCBMBODFEQPXFSPVUQVUT
"$DPOWFOJFODFPVUMFU7VOJUT
POMZ
0QUJPOBMSBDLNPVOUJOHXJUIJODMVEFE
SBDLFBST
1PXFSSFRVJSFNFOUT
8BUUT7"$)[
UMA 352 - Pg. 2
UMA™ 352
Q
Q
JOEJDBUPSTTIBMMJODMVEFQPXFSTJHOBM
QSFTFODFBUUIFBNQMJGJFSDIBOOFMTJHOBM
BOENVUFDPOEJUJPOBOE4145IFNJYFS
BNQMJGJFSTIBMMIBWFBIJFSBSDIJDBMNVUJOH
GVODUJPOXIFSFUIFJOQVUNPEVMFIBTUIF
IJHIFTUQSJPSJUZGPMMPXFECZ$IBOOFM
0VUQVUTTIBMMJODMVEFPOFEJSFDUBOEUISFF
USBOTGPSNFSCBMBODFE5IFQPXFSTXJUDI
TIBMMCFPOUIFSFBSQBOFMBMPOHXJUIUIF
EFUBDIBCMF*&$DPSEGVTFIPMEFSBOE
BDDFTTPSZQPXFSPVUMFU7POMZ
"QQMJDBUJPOT
1SFTFOUBUJPOSPPNT
#PBSESPPNT
$PVSUSPPNT
"VEJUPSJVNT
-FDUVSFIBMMT
.FFUJOHSPPNT
$POWFOUJPODFOUFST
1BHJOHTZTUFNT
#BDLHSPVOENVTJD
3FUBJMTQBDFT
3FTUBVSBOUT
%FTDSJQUJPO
5IF6."JTBIJHIRVBMJUZ
DPNNFSDJBMHSBEFBOBMPHBVEJP
NJYFSBNQMJGJFS%FTJHOFEGPSGMFYJCJMJUZJO
BQQMJDBUJPOUIJTNJYFSBNQSFQSFTFOUT
UIFMBUFTUTUBUFPGUIFBSUUFDIOPMPHZJO
BOBMPHDJSDVJUEFTJHO
1PXFSGVMZFUFBTZUPVTFUIFOFX6."
EFMJWFSTBNB[JOHTPOJDQFSGPSNBODF
-PXOPJTFEFTJHOBOEGFBUVSFTBQQMJDBCMF
UP²SFBMXPSME³TJUVBUJPOTNBLFTUIJTVOJU
JEFBMGPSBVEJPBQQMJDBUJPOTXIFSFB
DPNQBDUQPXFSFENJYFSXJUINVMUJQMF
JOQVUBOEPVUQVUDBQBCJMJUJFTBSF
SFRVJSFE
"SDIJUFDUVSBMBOE&OHJOFFSJOH
4QFDJGJDBUJPOT
5IFNJYFSBNQMJGJFSTIBMMIBWFJOQVUTBOE
BOBDDFTTPSZNPEVMFQPSUGPSVTFXJUI
QSFTFOUBOEGVUVSF1FBWFZ.."NPEVMFT
5IFGSPOUQBOFMTIBMMJODMVEFGPVSJOQVU
MFWFMDPOUSPMTCBTTBOEUSFCMFDPOUSPMTBOE
BNBTUFSPVUQVUDPOUSPM'SPOUQBOFM
5IFSFTIBMMCFGPVSJOQVUTXJUI&VSPUZQF
DPOOFDUPSTPOUIFSFBSQBOFMBOEMFWFM
DPOUSPMTPOUIFGSPOUQBOFM$IBOOFMTIBMM
BMTPJODMVEFBO9-3DPOOFDUPSBOEIBWFB
CSJEHJOHUSBOTGPSNFSJOQVUXJUITXJUDIBCMF
JOQVUTFOTJUJWJUZCFUXFFOUFMFQIPOFQBHJOH
BOENJDSPQIPOF8IFOJOUIFNJDSPQIPOF
NPEF7PMUQIBOUPNQPXFSTIBMMCF
BQQMJFEUPUIF*OQVU$IBOOFMTIBMMCF
FMFDUSPOJDBMMZCBMBODFEXJUIBTXJUDIBCMF
JOQVUTFOTJUJWJUZCFUXFFONJDBOEMJOF
MFWFMT8IFOJOUIFNJDSPQIPOFNPEF
7PMUQIBOUPNQPXFSTIBMMCFBQQMJFEUPUIF
*OQVU$IBOOFMTBOETIBMMCF
FMFDUSPOJDBMMZCBMBODFEMJOFMFWFMJOQVUT
XJUI$IBOOFMJODMVEJOHTUFSFP3$"KBDLT
"EEJUJPOBMMZUIFPVUQVUGSPN$IBOOFM
JOQVUTIBMMCFNBEFBWBJMBCMFWJBBO
FMFDUSPOJDBMMZCBMBODFEPVUQVUXJUIB&VSP
UZQFDPOOFDUPSBOEBTFQBSBUFMFWFM
DPOUSPM5IFNPEVMFQPSUTIBMMCFDBQBCMF
PGDPOUSPMMJOHCPUINVUFCVTFT%FQFOEJOH
VQPOUIFNPEVMFDIPTFOJUDBOCFTFUVQ
GPSNBTUFSDPOGJHVSBUJPO8IFOUIFJOQVU
TJHOBMUPBOJOQVUNPEVMFDPNNBOETB
NVUFGVODUJPO$IBOOFMTTIBMMCF
NVUFE
0OMZ$IBOOFMTIBMMIBWFBDPOUJOVPVTMZ
WBSJBCMFNVUFUISFTIPMEDPOUSPMPOUIFSFBS
QBOFM4FUUJOHUIJTDPOUSPMGVMMZDMPDLXJTF
TIBMMEFGFBUUIF$IBOOFMNVUFGVODUJPO
5IFNVUFMFWFMUISFTIPMEGPS$IBOOFM
TIBMMCFJODSFBTFEBTUIFDPOUSPMJTUVSOFE
DMPDLXJTF8IFOUIFTJHOBMMFWFMJO$IBOOFM
FYDFFETUIFNVUFUISFTIPME$IBOOFMT
TIBMMCFNVUFE$IBOOFMTBOETIBMM
JODMVEFBTXJUDIUPEFGFBUJUTNVUJOH
GVODUJPO8IFOUIFTXJUDIJTPVUUIF
DIBOOFMTIBMMCFNVUFE8IFOUIFTXJUDIJT
JOUIFDIBOOFMDBOOPUCFNVUFE
5IFNBTUFSTFDUJPOTIBMMJODMVEFGSPOU
QBOFMCBTTBOEUSFCMF&2DPOUSPMTFBDI
XJUIBE#SBOHFPGPQFSBUJPO"GSPOU
QBOFMNBTUFSMFWFMDPOUSPMTIBMMDPOUSPMUIF
PVUQVUTJHOBMMFWFMPGUIFQSFBNQNJYFS
5IFDBQBCJMJUZUPJOTFSUBOFYUFSOBMEFWJDF
TIBMMCFJODMVEFEWJBUXP3$"KBDLT"MPPQ
TXJUDITIBMMCZQBTTUIFMPPQQPJOU3FNPUF
NBTUFSMFWFMDPOUSPMDBQBCJMJUZTIBMMCF
JODMVEFEBMPOHXJUISFNPUFDPOUSPMGPSFBDI
NVUFCVT
5IFNJYFSBNQMJGJFSTIBMMIBWFBEJSFDU
0INPVUQVUBOEUSBOTGPSNFSCBMBODFE
PVUQVUT°7PMU7PMUBOE0IN5IF
BNQMJGJFSTIBMMJODMVEFDMJQQJOHQSPUFDUJPO
WJB4145IFVOJUTIBMMCFDBMMFEUIF
1FBWFZ"SDIJUFDUVSBM"DPVTUJDT%JWJTJPO
NPEFM6."
UMA 352 - Pg. 3
13 August 2005
05/2011
80303075
UMA™ 752
The UMA 752 is a high quality, commercial grade analog audio mixer/amplifier. Designed for flexibility
in application, these mixer/amps represent the latest, state-of-the-art technology in analog circuit design.
Features:
Applications:
• Board rooms
• Courtrooms
• Auditoriums
• Lecture halls
• Meeting rooms
• Paging systems
• Retail spaces
• Restaurants
UMA™ 752
Rated output power:
Output regulation:
Frequency Response Power Amplifier:
Frequency Response Pre-Amplifier:
THD:
Power bandwidth (±3 dB):
Signal/noise (22 Hz — 22 kHz) typical:
Outputs:
Inputs:
Tone controls:
Front panel controls and indicators:
Rear panel controls:
Muting:
Power requirements:
Dimensions:
Weight:
Color:
13 August 2005
05/2011
80303076
75 Watts
Direct out: <0.5 dB; Transformer out: <1.0 dB
±1.0 dB, 20 Hz to 20 kHz
Power Amplifier: 0.05% (1 kHz); Preamplifier: 0.10% with nominal gain settings
Direct out: <10 Hz to 70 kHz; Transformer out: 30 Hz to 40 kHz
All controls CCW: -100 dB; All controls nominal (5): -90 dB; Level controls CCW
and master level CW: -80 dB
Direct out: 4 Ohms; XFMR: Balanced 8 Ohms (25 V), 70 V, 100 V; Ch. 4 out: 1 V
nom., +21 dBu max. at 100 Ohms; Pre out: 1 V nom.; +21 dBu max., at 100 Ohms
Channel 1: Mic 1 mV at 1.8 k Ohms (XLR or screw terminals) Tel 100 mV at 20 k
Ohms (Screw terminals)
Channel 2: Mic 1 mV at 1.8 k Ohms (Screw terminals) Line 100 mV at 20 k Ohms
(Screw terminals)
Channel 3: Line 100 mV at 20 k Ohms (Screw terminals)
Channel 4: Line 100 mV at 20 k Ohms (Screw terminals), Stereo 316 mV (-10 dBV)
at 4.0 k Ohms (RCA jacks)
Power in: 1 Volt at 20 k Ohms
Bass: ±10 dB at 100 Hz; Treble: ±10 dB at 10 kHz
Channel 1 level control, Channel 2 level control, Channel 3 level control,
Channel 4 level control, Bass control, Treble control, Master level control, Input
channel signal level indicators: (signal presence = green; signal peak = red),
Input channel mute status, Power amplifier signal presence indicator, SPS™ indicator,
Power on indicator
Module input level control use with MMA input modules only, Channel 1 sensitivity
switch, Channel 1 mute bus assign switch, Mute 2 threshold control,
Channel 2 sensitivity switch, Channel 2 mute bus assign switch, Channel 4 output
level control, Loop switch, Power switch
Mute 1: MMA input module overrides Ch 1 through 4, Mute 2: Ch 1 overrides Ch 2
through 4 with adjustable threshold control range from OFF to 100 mV (TEL) or 1
mV (MIC)
180 Watts, 120 V AC, 60 Hz
19” x 13.25” x 3.45” with rack ears (483 mm x 337 mm x 88 mm)
17” x 13.25” x 3.45” without rack ears (432 mm x 337 mm x 88 mm)
23.8 lbs. (11 kg)
Black
UM™ 10
Our UMA series offers cost-effective solutions for small- to medium-sized jobs, but can also head up a
section of a larger job. Everything you’ll need is included--microphone inputs, telephone page, program
inputs and now even a plug-in module port for use with any single-space MMA™ module.
Features:
• Switchable Mic / Page input with screw terminals
• Dedicated Program input with screw terminals and RCA phono jack
• Signal activated muting of the program input by the Mic/Page input with adjustable mute
threshhold
• External muting of the program input via switch closure
• Bass and treble controls on the program input
• 4 Ohm, 8 Ohm, 25 V, and 70V outputs
• Power indicator
• Powder-coated steel chassis
• Internal current limiting and thermal fuse
Applications:
• Retail outlets
• Board rooms
• Court rooms
• Auditoriums
• Lecture halls
• Meeting rooms
• Paging systems
UM™ 10
Output Power:
Power Bandwidth:
Outputs:
Output Regulation:
Frequency Response:
Total Harmonic Distortion:
Input Configuration:
10 watts RMS
50 Hz-20 kHz, 1.0% THD
Direct: 4 Ohms; XFMR: 8 Ohms, 25V, and 70V
Direct: <0.5 dB; XFMR: <1.25 dB
50Hz - 20kHz, +/- 1 dB
20Hz - 20kHz - Mic: 60 dB, Page: 80 dB, Program: 80 dB
0.05%, rated output 1kHz
Mic/Page input selectable - screw terminals
Program input - screw terminals and RCA phono jack
Input Sensitivity:
Mic: 1 mV / 600 Ohms, balanced
Page: 100 mV / 600 Ohms, balanced
Program: 550 mV / 20k Ohms, balanced screw terminals
RCA phono jack: 150 mV / 20k Ohms, unbalanced
Tine Controls (Program input only): Treble: +/- 10 dB @ 10kHz; Bass: +/- 10dB @ 100Hz
Muting:
Internal: Signal activated muting of the Program input by the Mic/Page
input, adjustable threshold
External: Switch closure for external muting of Program input
Controls:
Mic/Page gain, Program gain, Bass tone, Treble tone, Mute threshold,
Mic/Page select, Power
Indicators:
Power LED
Connectors:
Mic/Page: Screw terminals; Program: Screw terminals and RCA phono
jack; Ouputs: Screw terminals; Muting: Screw terminals
Power Consumption:
Domestic: 35 Watts, 50/60 Hz, 120 VAC
Export: 35 Watts, 50/60 Hz, 230 VAC
Dimensions:
3.5” H x 10.2” W x 7.25” D
Weight:
6 lbs.
Color:
Gray
13 August 2005
05/2011
80300187
UA™ 35T II
The UAª 35T II is a high quality utility amplifier ideally suited for varying installation requirements. It
produces 35 watts into 4 and 8 ohm direct connections plus a broad range of line amplification. Level
controls are provided for mic/page and AUX. The AUX input is accessible via screw terminals or RCA
jacks. Bass and treble controls are functional on the total system (mic/page/AUX). When a signal is
present at the mix/page input, the AUX input is muted. This feature is internally defeated when required.
Features:
• 35 watts into 4 ohms
• Mic/page inputs (screw terminals)
• Mic/page select switch
• Dedicated program input (screw terminals and RCA jacks)
• Bass and treble controls
• Mic/page level controls
• Direct 4 ohm output (screw terminal)
• Completely isolated 8 ohm, 600 ohm, 25 volt and 70 volt outputs (screw terminals)
• Shelf-top or wall-mountable chassis
Applications:
• Retail outlets
• Board rooms
• Court rooms
• Auditoriums
• Lecture halls
• Meeting rooms
• Paging systems
UA™ 35T II
Output Power:
Power Bandwidth:
Frequency Response:
THD (1 kHz):
S/N Ratio (22 kHz BW):
Tone Controls:
AUX Input:
Mic/Page Input:
Input Sensitivity:
Outputs:
Output Regulation:
Controls:
Indicators:
Protection:
Power Consumption:
Dimensions:
Weight:
Color:
Other Features:
13 August 2005
05/2011
80304367
35 watts RMS
50 Hz-20 kHz, .8% THD Mic, 50 Hz-20 kHz, .6% THD AUX
50 Hz-20 kHz +0, -2 dB, 50 Hz-20 kHz +0, -2 dB Mic/Page
Aux <.05%, Mic <.2%, Page <.2%
Tone controls flat/input control max: 85 dB Aux, 58 dB Mic/Page
Bass ± 10 dB @ 100 Hz, Treble ±10 dB @ 10 kHz
Dual RCA phono jacks, summed
Screw terminal input switchable between mic/page
AUX Input: 100 mV @ 10K, Mic Input: 1 mV @ 1K,
Page Input: 120 mV @ 5K
4 ohms, 8 ohms, 600 ohms, 25 V, 70 V
Less than 0.5 dB, no load to full load
1 AUX input gain control, 1 mic/page gain control, 1 bass control, 1
treble control, 1 mic/page select switch
Power LED
Built-in, with AC line fuse
120 volts AC, 60 Hz, 100 watts
4.25” H x 8.25” W x 13.625” D
11.5 pounds
Gray
Mic/Page input has precedence over the AUX input (defeatable)
PZS™ 140RA
MULTI-ZONE MIXER / AMP
1;43".VMUJ;POF.JYFS"NQ
tXBUUPVUQVU[POF
The PZS 140RA defines the concept of room combining. This versatile matrix mixer t#BMBODFEMJOFPVUQVU[POF
allows you to send a single audio source to several rooms, or up to five different t'JWFJOQVUDIBOOFMTXJUI&2
t;POFBTTJHONFOUDIBOOFM
sources to multiple rooms, creating individual audio environments.
The D4S wall controller allows you to quickly configure rooms by remotely t"VUPNBUJDMFWFMTFOTJOHNVUJOH
selecting your audio sources. Up to eight D4S controllers can be used with a single tWPMUWPMUPINPSPINMPBET
PZS 140RA, allowing unprecedented efficiency and control at very little expense. t5ISFFSBDLTQBDFT
'
t3FNPUFBDDFTTWJB%4øVTINPVOUDPOUSPM
QBOFM
&
'
(
)
>cejih
9^\îVaGZbdiZ8dcigda
OdcZDjiejih
8dccZXi^dchB^X"AZkZa!
A^cZ"AZkZa!Hjbb^c\G86!
9^\îVaGZbdiZ8dcigda!
IgVch[dgbZg"8djeaZY
AdjYheZV`ZgDjieji!9^gZXi"
8djeaZYAdjYheZV`ZgDjieji!
IgVch[dgbZg"8djeaZYA^cZ
aZkZaDjieji
(
Model
PZS™ 140RA
(
&
)
Frequency Response
THD
+N
S/N
Ratio
Converters
Dimensions
Agency
Approvals
Operating
Voltage
12 Hz to 20 kHz, +1/-2 dB
.015%
>90 dB
Oversampled
A/D 16 bit 64x
D/A 16 bit linear
1.75" H x 19" W x 7.5"
UL, CUL
120/240
PZS™ 140RA
The PZS 140RA is a full featured matrix mixer with four integral 35 Watt power amplifiers. The five-input, four-output architecture is supported by a full matrix with microprocessor-based assignment, store/
recall functionality, front panel controls and support for the D-Series remote control network.
The compact 3U package features and intuitive front panel design with easy access to zone assign buttons, EQ, input level and output drive controls. Visual feedback is included for matrix routing assignment, input and output audio level and paging mute for master channels.
Features:
• Five input channels, assignable to any output
• Mic and line inputs for each channel
• RCA summing inputs (ch. 3, 4, and 5)
• Four balanced (600 Ohm) line level outputs
• Four 25W power amplifiers
• 70V, 25V, 8 Ohm, and 4 Ohm amp outputs
• Euro connectors for all inputs and outputs
• Support for the D-Series control panels
• Signal LED on each input
• Zone assignment switches for easy routing
• Adjustable threshold for paging hold
• Shelf or rack-mountable, fan cooled package
Applications:
• Retail
• Restaurants & Bars
• Schools
• Multi-purpose facilities
• Correctional facilities
• Professional complexes
PZS™ 140RA
Rated Power (individual 4 Ohm load): 35W @ 60 Hz to 20 kHz < 1% T.H.D., simultaneous operation x 4
Minimum Load Impedance: 4 Ohms, direct coupled. 25V, 70V, and 8 Ohm transformer coupled
Frequency Response: 60 Hz to 20 kHz; +0, -3 dB 9transformer coupled)
T.H.D., one channel driven: <0.05% @ 35W @ 1kHz
Inputs, channel 1 & 2:
Mic: 2k Ohm, -54 dBu (1.5 mV, balanced)
Line: >50k Ohm , -18 dBu (100 mV balanced)
RCA: >50k Ohm, -18 dBu (100 mV balanced)
Signal to Noise Ratio: Residual: (channel down, master full), 90 dB below rated power
Line inputs: (controls nominal, 150 Ohm terminated), 82 dB below rated power
Mic Inputs: (controls nominal, 150 Ohm terminated), 82 dB below rated power
Tone controls: Low EQ: +10, -10 dB @ 100 Hz
High EQ: +10, -10 dB @ 10 kHz
Controls: Channels 1&2: Level, Low EQ, High EQ, Assign, Signal Presence LED, Mute LED, Threshold
(trigger), Hold/Release Time Adjust
Dimensions: 5.625” H x 19” W x 15.375” D
Shipping Weight: 42.5 lbs.
Net Weight: 37.3 lbs.
Mounting: Three EIA Space Rackmount
13 August 2005
05/2011
AUTOMIX® CONTROL 8
THE WORLD’S MOST AFFORDABLE, EXPANDABLE AUTOMIXER.
"650.*9¥$0/530- &JHIU$IBOOFM"VUPNBUJD.JYFS
The Automix® Control 8 is a high-quality automatic mixer with
eight transformer-balanced mic/line inputs. Each channel
provides a gain control, 48 V phantom power (mic inputs),
low-cut filter, activity/clipping LED, an aux send control and
a choice between manual and automatic operation. Each
channel also provides a defeatable insert point, 5 V TTL status
output and can be muted individually (multiple channels can
be muted simultaneously via an assignable mute bus).
t&JHIUUSBOTGPSNFSCBMBODFENJDMJOFJOQVUT
tWPMUQIBOUPNQPXFS
t7BSJBCMFQSJPSJUZGFBUVSFPODIBOOFMTBOE
t)[MPXDVUöMUFSDIBOOFM
t"DUJWJUZBOEDMJQQJOH-&%DIBOOFM
In addition, channels 1 and 2 provide an adjustable priority
control. The master section provides a gain trim control,
three 1/9 octave sweepable notch filters, a downward
expander, transformer-balanced outputs (main and aux),
and remote volume connections. The Automix Control 8 has
been designed to easily link multiple units together to form a
single mixer with many more inputs (16, 24, 32). The Automix
Control 8 is supplied with a see-through Plexiglas security
panel to prevent changes to the installer’s settings.
t"VYTFOEDIBOOFM
t6OJUTBSFMJOLBCMFXJUI"VUPNJYBOE4.3
"OPJOQVUMPTT
t5ISFFTXFFQBCMFNBTUFSOPUDIöMUFST
t5SBOTGPSNFSCBMBODFENBJOBOEBVYPVUQVUT
8djcXâ8]VbWZgh
t%JSFDUPVUBOEQSPDFTTJOHMPPQGPSFBDIJOQVU
t-PHJDPVUQVUT
t$&BQQSPWFE
>iZbCjbWZg/%%*&%..%
8djgiGddbh
B^Xgde]dcZ>cejih
?jY\ZLîcZhh9Z[ZchZEgdhZXjidg?jgn?Vâ8Zaa
EB&-HB^Xh
8]V^gbVc^hdcV
eg^dgînX]VccZa
;ZZYid
?Vâ8Zaa
88K:8VbZgVh
KHM'+
J6(*I>>
EB&-HB^Xh
8dbW^cZgA^c`
>bejahZ+I
K^YZdHlîX]Zg[dg
K^YZd6ggV^\cbZci
9^gZXiDjiejih
KHM)>E6(%%I
8ajhiZgd[>bejahZ
+*'H:cXadhjgZh
KHM'+
>9A&%%%
*kdaiad\^Xdjieji
dcZVX]X]VccZaid
XdccZXiidk^YZd
hlîX]Zg
Ad\\^c\
GZXdgYZg
>E6
(%%Ih
>bejahZ+Ih
t&BDIDIBOOFMNJDMJOFTFMFDUBCMF
t#BMBODFEPVUQVU
t&BTJMZMJOLFEUPDSFBUFBBOE
DIBOOFMNJYFS
(
-
.
&'
)
*
+
&&
,
&%
&
$IBOOFM-FWFM
.BTUFS-FWFM
%JQ4XJUDIFT
"VY4FOE$POUSPM
''
'&
&,
(BJO5SJN
"DUJWJUZ$MJQQJOH-&%"DUJWJUZ
1SJPSJUZ$IBOOFMPOMZ
"VY.BTUFS-FWFM$POUSPM
&-
'
%PXOXBSE&YQBOEFS
.BTUFS(BJO5SJN
/PUDI'JMUFS-FWFM$POUSPM
/PUDI'JMUFS'SFRVFODZ$POUSPM
&+
'(
&)
&*
&.
.JD*OQVUT
*OTFSU*O0VU
*OTFSU#ZQBTT4XJUDI
%JSFDU0VUQVUT
'%
&(
.BJO0VU
"VY0VU
3FNPUF7PMVNF
.VUF#VT
-JOL1PSU
-JOL4XJUDI
1PXFS4XJUDI
CJB7:GD;DE:CB>8HCDB·I]ZbVm^bjb\V^cViiV^cVWaZ[gdbVhdjcYgZ^c[dgXZbZciVjY^dhnhiZb^ha^bîZYWni]ZcjbWZgd[deZcb^Xgde]dcZh#:kZgni^bZi]ZcjbWZgd[deZcb^Xgde]dcZh^hYdjWaZYi]Z
ediZci^Va\V^cd[i]ZhnhiZb^h]VakZY#I]ZVbdjcid[\V^cgZYjXi^dc^cY7^hZfjVaidiZci^bZhi]Zad\Vgî]bd[i]ZcjbWZgd[i]ZdeZcb^Xgde]dcZh\V^cgZYjXi^dcY72&%ad\CDB#
Automatic Mixer Application Guide Available At: http://www.peavey.com/media/pdf/aa/automix.pdf
AUTOMIX® CONTROL 8
The Automix® Control 8 is a high-quality automatic mixer with eight transformer-balanced mic/line
inputs. Each channel provides a gain control, 48 V phantom power (mic inputs), low-cut filter, activity/clipping LED, an aux send control and a choice between manual and automatic operation. Each
channel also provides a defeatable insert point, 5 V TTL status output and can be muted individually
(multiple channels can be muted simultaneously via an assignable mute bus). In addition, channels
1 and 2 provide an adjustable priority control. The master section provides a gain trim control, three
1/9 octave sweepable notch filters, a downward expander, transformer-balanced outputs (main and
aux), and remote volume connections. The Automix Control 8 has been designed to easily link multiple units together to form a single mixer with many more inputs (16, 24, 32). The Automix Control
8 is supplied with a see-through Plexiglas security panel to prevent changes to the installer’s settings.
Features:
• Eight transformer-balanced mic/line inputs
• Variable priority feature on channels 1 and 2
• 100 Hz low cut filter/channel
• Activity and clipping LED/channel
• Aux send/channel
• 48 volt phantom power
• Three sweepable master notch filters
• Transformer-balanced main and aux outputs
• Direct out and processing loop for each input
• Logic outputs
• CE approved
• Units are linkable with Automix 4 and SMR™ 821A; no input loss
Automix Control 8 - Pg. 1
AUTOMIX® CONTROL 8
Microphone Input:
Input Levels:
150 Ohms, 60 dB Max Gain to balanced outputs, Balanced
-64 dBu (0.5mV) Minimum, -43 dBu (5.5mV) Nominal, -2 dBu (615mV) Maximum
Line Input:
Input Levels:
10k Ohms, 30 dB Max Gain to balanced outputs, Balanced
-35 dBu (13.7mV) Minimum, -14 dBu (155mV) Nominal, +27 dBu (17.4mV) Maximum
Main Ouput:
Output Levels:
Minimum load 600 Ohms, balanced output
+2.21 dBu (1V) Nominal, +20 dBu (7.75V Hi Z Load), +16 dBu (6.44V 600 Ohm Load)
Aux Output:
Output Levels:
Minimum load 600 Ohms, balanced output
+2.21 dBu (1V) Nominal, +20 dBu (7.75V Hi Z Load), +16 dBu (6.44V 600 Ohm Load)
Distortion:
Frequency Response:
<0.2% at nominal (20 Hz to 20 kHz) mic input to main output
20 Hz to 20 kHz +0/-1 dB at nominal, mic input to main output
20 Hz to 20 kHz +0/-1 dB at nominal, mic input to aux output
-85 dBu Main output (residual noise 0dB reference) All controls down
-84 dBu Main output (residual noise 0dB reference) One channel nominal, Master level nominal
87 dBu Main output (S/N Ratio 2.21dB reference) All controls down
86 dBu Main output (S/N Ratio 2.21dB reference) One channel nominal, Master level nominal
-85 dBu Main output (residual noise 0dB reference) All controls down
-80 dBu Main output (residual noise 0dB reference) One channel nominal, Master level nominal
87 dBu Main output (S/N Ratio 2.21dB reference) All controls down
82 dBu Main output (S/N Ratio 2.21dB reference) One channel nominal, Master level nominal
22Hz - 22kHz BW
Hum and Noise:
Main Output
Hum and Noise:
Aux Output
Hum and Noise Measurements:
Remote Volume Range:
Off Channel Attenuation:
Mute:
Mute Bus:
Status Output:
Power Consumtion:
Weight:
Dimensions:
0dB to 70dB of attenuation
0dB to 70dB
Channel is attenuated 45dB when mute to ground connection is made
Multiple channels can be attenuation 45 dB when MuteBus to ground connection is made
Status is high (5V) when channel is active. It is low (0V) when channel is not active
AC 120 volts, 60 Hz, Domestic
AC 230 volts, 50/60 Hz Export
15 watts
11 lbs. (4.9 kg)
Width: 19” (48.26 cm)
Depth: 9 1/4” (23.49 cm)
Height: 3 1/2” (8.89 cm)
Automix Control 8 - Pg. 2
13 August 2005
05/2011
SMR™ 821A
EIGHT-CHANNEL MIXER
5IF"VUPNJY¥$POUSPMJTBIJHIRVBMJUZBVUPNBUJDNJYFSXJUI
FJHIUUSBOTGPSNFSCBMBODFENJDMJOFJOQVUT&BDIDIBOOFM
QSPWJEFTBHBJODPOUSPM7QIBOUPNQPXFSNJDJOQVUT
MPXDVUöMUFSBDUJWJUZDMJQQJOH-&%BOBVYTFOEDPOUSPM
BOEBDIPJDFCFUXFFONBOVBMBOEBVUPNBUJDPQFSBUJPO
&BDIDIBOOFMBMTPQSPWJEFTBEFGFBUBCMFJOTFSUQPJOU7
55-TUBUVTPVUQVUBOEDBOCFNVUFEJOEJWJEVBMMZNVMUJQMF
DIBOOFMTDBOCFNVUFETJNVMUBOFPVTMZWJBBOBTTJHOBCMF
NVUFCVT
*OBEEJUJPODIBOOFMTBOEQSPWJEFBOBEKVTUBCMFQSJPSJUZ
DPOUSPM5IFNBTUFSTFDUJPOQSPWJEFTBHBJOUSJNDPOUSPM
t5XPTFMFDUBCMF3$"TUFSFPPSNPOPMJOFJOQVUT
UISFFPDUBWFTXFFQBCMFOPUDIöMUFSTBEPXOXBSE
FYQBOEFSUSBOTGPSNFSCBMBODFEPVUQVUTNBJOBOEBVY
BOESFNPUFWPMVNFDPOOFDUJPOT5IF"VUPNJY$POUSPM
IBTCFFOEFTJHOFEUPFBTJMZMJOLNVMUJQMFVOJUTUPHFUIFS
UPGPSNBTJOHMFNJYFSXJUINBOZNPSFJOQVUT
5IF"VUPNJY$POUSPMJTTVQQMJFEXJUIBTFFUISPVHI
1MFYJHMBTTFDVSJUZQBOFMUPQSFWFOUDIBOHFTUPUIF
JOTUBMMFSTTFUUJOHT
AUTOMIX® CONTROL8 Eight Channel Automatic Mixer
t5ISFFFMFDUSPOJDBMMZCBMBODFEMJOFPVUQVUT.BTUFSMFGUSJHIU
BOEBVY
t'PVSCBOE&2PONBTUFSMFGUSJHIUPVU
t3FNPUFNBTUFSWPMVNFDPOUSPM
t3FNPWBCMF&VSPTUZMF*0DPOOFDUPST
t4JYCBMBODFENJDMJOFJOQVUTUSBOTGPSNFSPQUJPOBM
tWPMUQIBOUPNQPXFSTFMFDUBCMFQFSDIBOOFM
t.JDMJOFJOQVUTBTTJHOBCMFQFSDIBOOFMUPBMMUISFFCVTFT
t$&BQQSPWFE
t$IBOOFMNVUFDBQBCJMJUZWBSJBCMFUISFTIPME
I=G::"ODC:8DCIGDA
A:;IDJI
6JMDJI
G><=IDJI
>E6,*'
6BEA>;>:G
>E6,*'
6BEA>;>:G
ODC:&
ODC:'
>E6&*%'
6BEA>;>:G
ODC:(
:><=I8=6CC:AH>C6H>C<A:G68@HE68:L>I=I=:;A:M>7>A>IND;7:>C<JH:96H6ODC:B>M:G#
Model
SRM™ 821A
Frequency Response
Input
Sensitivity
EIN
dBu
THD + N
dBu
Dimensions
& Weight
Agency
Approvals
Operating
Voltage
20 Hz to 20 kHz, +0/-1 dB
-70 dBu
-128 dBu
<0.1
1.75" H x 19" W x 7.5"
11 lbs.
UL, CE
120/240
SMR™ 821a
The SMR™ 821a is a versatile, high quality mixer designed with the professional in mind. Offering six
microphone inputs, two switchable stereo inputs, and such features as buss assignment, phantom power,
remote master, Left, Right, and Aux output, this compact unit is perfectly suited to modern diverse applications. All inputs and outputs are electronically balanced.
Features:
• Single rack space design
• Eight total inputs: six balance mic/line; two unbalanced stereo
• LED level/clip status indicator on each channel
• Mic inputs include selectable 48-Volt phantom power
• Two selectable stereo line inputs (switched between mono or stereo)
• Three assignable electronically balanced outputs: Left‚ Right‚ Aux
• Master level controls for each output bus
• Three five-segment LED meter arrays
• Four-band EQ: low‚ low-mid‚ high-mid‚ high
• Integral channel muting system with priority
• Audio and mute bus linking
• Left‚ Right‚ Aux and Mute bus links for stacking multiple units
• Rear panel master/slave linking mode switch
• Remote master Left/Right level control port
• Rear panel 20 dB pad switch on each microphone input
• Front panel continuously variable preamp gain control
• Rear panel bus assign switches for each microphone channel
• Rear panel global 100 Hz low-cut filter switch for all microphone inputs
• Mute bus with channel 1 rear panel threshold control
• Select switch for routing microphone mix bus post remote control
• All audio I/O on removable Euro connectors
SMR™ 821a
Frequency Response:
20 Hz–20 kHz +0 dB/-1 dB
Total Harmonic Distortion + Noise: <0.05% typical 22 Hz–22 kHz BW; Mic to Left/Right out 40 dB Mic
gain‚ +4 dBu‚ 20 Hz–20 kHz
Equivalent Input Noise (EIN):
-128 dBu Mic input terminated with 150 Ohms
CMRRatio (Mic Input):
>70 dB typical 20 Hz–20 kHz
Crosstalk Adjacent (1 kHz):
>70 dB typical
Crosstalk Output to Output (1 kHz): >60 dB typical
Phantom Power:
+48 volts at mic + and - inputs
Remote Control Volume:
30 dB attenuation (10k ohm potentiometer) typical
60 dB attenuation (100k ohm potentiometer) typical
Channel Mute:
>60 dB attenuation
Signal/Clip Indicators:
Input Channel Status Green: -20 dBu, Red: 2 dB below clipping
Output Level Meters:
-24: -20 dBu, -6: -2 dBu, 0: +4 dBu, +6: +10 dBu, Clip: 2 dB below
clipping
Connections: Removable Euro-type connectors for single channel audio inputs‚ outputs‚ bus link and external
control. RCA singleended female for channels 7 and 8 stereo inputs. IEC receptacle for AC power.
Mounting:
Dimensions:
Weight:
Power Requirements:
Single EIA Rack Mount
1.75” (H) x 19” (W) x 8.75” (D) (45 mm x 483 mm x 222 mm)
7.4 lbs (3.4 kg)
Domestic: 120 VAC‚ 60 Hz 15 Watts nominal
Export: 230 VAC‚ 50/60 Hz 15 Watts nominal
13 August 2005
05/2011
80303116
OCTOPOWER™ 850
MULTI-CHANNEL POWER AMPLIFIER
The Octopower 850 is a commercial multi-channel power
amplifier designed for fixed installation in integrated systems.
The Octopower includes nine discreet power amplifier
channels, each with 50 watts of full bandwidth power into
a 4-ohm load. Any combination of two amplifier channels
can be bridged for multiple configurations. In its maximum
bridged configuration, the Octopower provides one 50-watt
channel at 4 ohms and four 100-watt channels at 8 ohms.
Also included is a powerful Fault Contact feature with highcurrent Form C contacts. The Fault Contacts can be used for
t36&*"SBDLQBDLBHF
t/JOFEJTDSFFUBVEJPQPXFSBNQMJöFST
t#BMBODFEMJOFMFWFMJOQVUT
tXBUUT3.4BUPINTQFSDIBOOFMY
switching alarm and supervisory systems. All connections
are located on the rear panel, and a removable AC power
cable is included.
Audio level control is recessed and located on the rear
panel for tamper-resistant installation. Front-panel features
include visual monitoring of fault status and audio levels
for all nine channels. The Octopower also features forcedair cooling and is built into a standard 2RU EIA package
designed for rack mounting. The Octopower is compatible
with MediaMatrix® systems.
t#SJEHFBCMF
t'PSDFEBJSDPPMJOH
t3FDFTTFESFBSQBOFMMFWFMDPOUSPMT
t7JTVBMGSPOUQBOFMQPXFSTUBUVT-&%
+
&
&
'
(
)
*
+
t'SPOUQBOFMGBVMUNPOJUPSJOH
t3FBSQBOFMIJHIDVSSFOUGBVMUDPOUBDUT
'PSN$
t)FBWZEVUZ$34DPOTUSVDUJPO
8^gXjî7gZV`Zg
;Vjai8dciVXih
EdlZg6bea^ÄZg
Djiejih
8]VccZa.>$D
6jY^d>ceji
8]VccZaAZkZa
'
(
)
*
I]ZDXidedlZg-*%^h9Zh^\cZY[dgJhZLî]BZY^VBVig^m9^\îVa6jY^dHnhiZbhdg^cHiVcY"6adcZ
DeZgVi^dc#;ZVijg^c\C^cZ9^hXgZiZ8]VccZahd[EdlZg6bea^[^XVi^dcVcY;Vjai8dciVXi8dccZXi^dch#
IPA™ SERIES
INDUSTRIAL POWER AMPLIFIER
*1"
*OEVTUSJBM1PXFS"NQMJGJFS
t4JOHMFDIBOOFMJOEVTUSJBMQPXFSBNQMJöFS
tXBUU3.4PVUQVU
*1"
tXBUU3.4PVUQVU
tWPMUFYQPSU
WPMUWPMUPS
PINMPBET
t*TPMBUFEPVUQVUUSBOTGPSNFS
t4FMFDUBCMFTVCTPOJDöMUFS
t5XPSBDLTQBDFTSBDLFBSTJODMVEFE
t%VBMTQBDFQPSUGPSBMM.."4FSJFT
NPEVMFT
t$&BQQSPWFE
tWPMUFYQPSU
WPMUWPMUPS
PINMPBET
t5XPSBDLTQBDFTSBDLFBSTJODMVEFE
t%VBMTQBDFQPSUGPSBMM.."4FSJFT
NPEVMFT
t$&BQQSPWFE
Model
Frequency Response
THD
+N
S/N
Ratio
Output Power
Agency
Approvals
Operating
Voltage
IPA™ 752
20 Hz to 20 kHz, ±0.5 dB Direct Out
50 Hz to 20 kHz, ±0.5 dB Transformer Out
.005%
95 dB
75 watts RMS
3.5" H x 17" W x 15.75" D
(21.2 lbs)
UL, CE
120/240
IPA™ 1502
50 Hz to 20 kHz, ±0.5 dB
XFMR Output
.005%
95 dB
150 watts RMS
3.55" H x 17" W x 15.75" D
(26.9 lbs)
UL, CE
120/240
*1"5
tXBUU3.4PVUQVU
tWPMUFYQPSU
WPMUWPMUPS
PINMPBET
t&YDMVTJWF414TQFBLFSQSPUFDUJPO
DJSDVJUSZ
t#BMBODFEJOQVUT9-3w534BOE
CBSSJFSTUSJQ
t5ISFFSBDLTQBDFT
tXBUUT3.4DIBOOFMPINT
t-PBEGBVMUDPSSFDUJPO
t7BSJBCMFTQFFEGBO
t'BEFJOQSPUFDUJPO
t#SJEHFENPEFPQFSBUJPOXBUUTBU
PINT
t5XPSBDLTQBDFT
t$&BQQSPWFE
*1IL:AK:
tXBUUT3.4DIBOOFMPINT
t6-$&BQQSPWFE
Model
Frequency Response
THD
+N
S/N
Ratio
Output Power
Agency
Approvals
Operating
Voltage
IPA™ 300T
50 Hz to 20 kHz, ±0.5 dB
XFMR Output
.01%
95 dB
300 watts RMS
5.25” H x 19” W x 15.75” D
(39.59 lbs)
UL, CUL
120/240
IPA™ 1502
25 Hz to 20 kHz, ±0.5 dB
XFMR Output
.02%
> - 106 dB
900 watts RMS/2 ohm
700 watts RMS/4 ohm
3.55" H x 17" W x 15.75" D
(23 lbs)
UL, CE
120
IPA™ 752
The IPA 752 is a high-quality‚ industrial-grade audio amplifiers. Designed for flexibility in application‚
these amplifiers represent the latest‚ state-of-the-art technology in amplifier design. Powerful‚ yet easy
to use‚ the new IPA series delivers amazing sonic performance. Low-noise design and features applicable to “real world” situations make these units ideal for audio applications where a powerful yet‚ compact amplifier with multiple input and output capabilities are required.
Features:
• One plug-in module port: allows for any single- or double-space MMA™ module
• Input control for MMA input modules on rear panel
• Balanced screw terminal bridging input
• Input sensitivity control for bridging input on rear panel
• Switchable 60Hz‚ 4th order high-pass filter
• Priority/Muting system with internal signal override
• Remote volume control capability
• Preamp output and power amp input loop for external processing equipment or auxiliary output
•Front panel master level control
• Amplifier signal indicator
Applications:
• Board rooms
• Court rooms
• Auditoriums
• Lecture halls
• Meeting rooms
• Paging systems
IPA™ 752
Rated Output Power:
Output Regulation:
Frequency response:
75 W
Direct Out: <0.5dB, Transformer Out: <1.0dB
Power Amp Direct Out: +/-0.5dB, 20Hz-20kHz
Transformer Out: +/- 1.0dB‚ 50Hz–20kHz
Pre-amp Out: +/- 1.0dB‚ 20Hz–20kHz
THD:
Power Amplifier: 0.05% (1kHz) @ full power,
Pre-amplifier: 0.10% with nominal settings
Power Bandwidth:
Direct Out: <10Hz–20kHz, Transformer Out: 30Hz–20kHz
Signal/Noise:
(22Hz–22kHz) typical, All controls CCW: -100dB,
All controls nominal: -90dB
Outputs:
Direct Out: 4 Ohms, XFMR: Balanced 8 Ohms‚ 25V‚ 70V
Pre Out: 1V nominal‚ +21dBu max @ 100 Ohms
Input Sensitivity:
Bridging Input: Up to 100mV @ 20k Ohms, Power In: 1V @ 20k Ohms
Front Panel Controls:
Master Level Control, Power Amplifier Signal Presence Indicator,
SPS™ Indicator, Power On Indicator
Rear Panel Controls:
Module Input Level Control (use with MMA™ input modules only),
Bridging Input Level Control, Loop Switch, Power Switch
Muting:
MMA™ input module with muting capability overrides the Bridging Input
Other Features:
Remote Volume Control (RVC) via screw terminals, 10k Ohm
approximately 30dB of attenuation, 100k Ohm approximately 60dB of
attenuation
Power Requirements:
Domestic: 180W‚ 120VAC‚ 60Hz, Export: 180W‚ 230VAC‚ 50/60Hz
Dimensions (with rack ears): 19.00” (483mm) W x 13.25” (337mm) D x 3.45” (88mm)
Weight:
22.5 lbs (10 kg)
13 August 2005
05/2011
80303069
IPA™ 1502
The IPA 1502 is a high-quality‚ industrial-grade audio amplifiers. Designed for flexibility in application‚ these amplifiers represent the latest‚ state-of-the-art technology in amplifier design. Powerful‚ yet
easy to use‚ the new IPA series delivers amazing sonic performance. Low-noise design and features
applicable to “real world” situations make these units ideal for audio applications where a powerful yet‚
compact amplifier with multiple input and output capabilities are required.
Features:
• One plug-in module port: allows for any single- or double-space MMA™ module
• Input control for MMA input modules on rear panel
• Balanced screw terminal bridging input
• Input sensitivity control for bridging input on rear panel
• Switchable 60Hz‚ 4th order high-pass filter
• Priority/Muting system with internal signal override
• Remote volume control capability
• Preamp output and power amp input loop for external processing equipment or auxiliary output
•Front panel master level control
• Amplifier signal indicator
Applications:
• Board rooms
• Court rooms
• Auditoriums
• Lecture halls
• Meeting rooms
• Paging systems
IPA™ 1502
Rated Output Power:
Output Regulation:
Frequency response:
150 W
Direct Out: <0.5dB, Transformer Out: <1.0dB
Power Amp Direct Out: +/-0.5dB, 20Hz-20kHz
Transformer Out: +/- 1.0dB‚ 50Hz–20kHz
Pre-amp Out: +/- 1.0dB‚ 20Hz–20kHz
THD:
Power Amplifier: 0.05% (1kHz) @ full power,
Pre-amplifier: 0.10% with nominal settings
Power Bandwidth:
Direct Out: <10Hz–20kHz, Transformer Out: 30Hz–20kHz
Signal/Noise:
(22Hz–22kHz) typical, All controls CCW: -100dB,
All controls nominal: -90dB
Outputs:
Direct Out: 4 Ohms, XFMR: Balanced 8 Ohms‚ 25V‚ 70V
Pre Out: 1V nominal‚ +21dBu max @ 100 Ohms
Input Sensitivity:
Bridging Input: Up to 100mV @ 20k Ohms, Power In: 1V @ 20k Ohms
Front Panel Controls:
Master Level Control, Power Amplifier Signal Presence Indicator,
SPS™ Indicator, Power On Indicator
Rear Panel Controls:
Module Input Level Control (use with MMA™ input modules only),
Bridging Input Level Control, Loop Switch, Power Switch
Muting:
MMA™ input module with muting capability overrides the Bridging Input
Other Features:
Remote Volume Control (RVC) via screw terminals, 10k Ohm
approximately 30dB of attenuation, 100k Ohm approximately 60dB of
attenuation
Power Requirements:
Domestic: 180W‚ 120VAC‚ 60Hz, Export: 180W‚ 230VAC‚ 50/60Hz
Dimensions (with rack ears): 19.00” (483mm) W x 13.25” (337mm) D x 3.45” (88mm)
Weight:
26.1 lbs (12 kg)
13 August 2005
05/2011
80303070
IPA™ 300T
The IPA 300T is a high performance power amplifier designed to meet the needs of the most demanding
fixed installation/PA applications. The convenient patch panel layout couple with state of the art circuit design, assures the reliable long term operation and smooth trouble free installation.
Twenty-five and seventy volt fully isolated line output capability is standard equipment. The IPA 300T has
been packaged for standard 19” rack mount capability and occpies 5 1/4 inches of vertical rack space.
Features:
• 300 Watts RMS into 4 Ohms
• Level control
• Subsonic filter switch
• SPS switch
• Power on LED
• Power switch
• 4 Ohm screw terminal direct output
• 8 Ohm balanced output
• 70V balanced output
• 25V balanced output
• 1V/600 Ohm balanced output
• AC convenience outlet
IPA 300T- Pg. 1
IPA™ 300T
Rated Power and Load:
Direct output: 300W RMS @ 4 Ohms, Transformer output (fully iso
lated) 300W RMS @ 16 Ohms (70V)/2 Ohms (25V)
0.1% THD @ rated power
Direct output: +0/-1 dB 40 Hz - 20 kHz
Greater than 95 dB below rated power
4k Ohms
Provides an 18dB per octave roll-off of low frequencies with the 3dB
point @ 42Hz
300 W RMS @ 4 Ohms
Level control, subsonic filter switch, SPS switch, Power switch
Power on LED
4 Ohm screw terminal direct output, 8 Ohm balanced output, 70V
balanced outpu 25V balanced output, 1V/600 Ohm balanced output,
AC convenience outlet
Painted shelf or rack mount metal chassis
5.25” H x 13.13” D x 19” W (13.3 cm x 33.35 cm x 483 mm)
37 lbs. (16.8 kg)
Distortion:
Frequency response:
Hum and Noise:
Input Impedance:
Subsonic Filter:
Power Output:
Controls:
Indicator LEDs:
Outputs:
Construction:
Dimensions:
Weight:
ARCHITECTURAL AND ENGINEERING SPECIFICATIONS - The power amplifier shall have one
input that has provisions for both balanced and unbalanced signals. Connections for the balanced input shall be
provided via a TRS 1/4” jack, XLR, and barrier strip connections. Connections for the unbalanced input shall
be provided by the TRS 1/4” jack, barrier strip connections, and an RCA phono jack. Provisions for an external
master volume control shall be made via barrier strip connections on the back panel. The unit shall be packaged in a rugged metal chassis 19” wide by 5 1/4” high by 3 1/8” deep (including external handles). Weight
is 37 lbs. THe unit shall operate from standard 120 volts AC, 60 Hz power. The amplifier shall be capable of
delivering 300 Watts into 4 Ohmsand 8 Ohms, as well as providing 25 volt and 70 volt line outputs. The unit
shall be capable of delivering rated pwer from 40Hz to 20kHz, +0/-1 dB into 4 Ohms at its direct output at
0.5% or less distortion with system hum and noise at least 95 dB below rated ouput. THe unit shall be called
the Peavey Architectural Acoustics Division model IPA 300T.
IPA 300T - Pg. 2
13 August 2005
05/2011
80301547
IP™ - Twelve
The IP-Twelve dual-channel amplifiers are ruggedly built from high quality components and feature comprehensive protection circuits to protect your amplifier in the real world.
Features:
• 700 watts RMS/channel (4 ohms)
• 900 watts RMS/channel (2 ohms)
• Bridged mode operation (1850 watts at 4 ohms)
• Exclusive SPS speaker protection circuitry
• Variable-speed fan
• Load fault correction
• Fade-in protection
• Two rack spaces
• UL/CE approved
Applications:
• Board rooms
• Court rooms
• Auditoriums
• Lecture halls
• Meeting rooms
• Paging systems
IP™ - Twelve
Rated Power 4 ohms bridge:
Rated Power 2 x 2 ohms:
Minimum Load Impedance:
Maximum RMS Voltage Swing:
Frequency Response:
Power Bandwidth:
T.H.D. 2 x 2 ohms:
T.H.D. 2 x 4 ohms:
T.H.D. 2 x 8 ohms:
SMPTE IMD:
Slew Rate:
Damping Factor (8 ohms):
Input CMRR:
Voltage Gain:
Input Sensitivity:
Input Impedance:
Hum and Noise:
Crosstalk:
Current Draw @ 1/8 power:
Current Draw @ 1/3 power:
Idle Current Draw:
Max. Current Draw:
Thermal Emissions (BTU/hr.):
Cooling:
Controls:
Indicator LEDs:
Protection:
Connectors:
Construction:
Dimensions:
Packaged Weight:
Unit Weight:
13 August 2005
05/2011
1850 watts @ 1 kHz <0.1% THD
900 watts per channel @ 1 kHz <0.05% THD both channels driven
950 watts @ 1 kHz at <0.05% THD
2 ohms
73 volts
10 Hz - 100 kHz; +0, -3 dB at 1 watt
10 Hz - 50 kHz; +0, -3 dB at rated 4 ohm power
< 0.02% @ 700 W per channel from 20 Hz to 20 kHz
< 0.1% 60 Hz and 7 kHz, 250 W @ 4 ohms
35V/us
> 150:1 @ 20 Hz - 400 Hz
> -75 dB @ 1 kHz
x 40 (32 dB)
1.32 volts +/- 3% for 1 kHz. 4 ohm rated power, 1.06 volts +/- 3% for 1 kHz.
15k ohms, balanced
> -106dB, “A” weighted referenced to rated 4 ohm power
> -55dB, “A” weighted referenced to rated 4 ohm power
1000 watts @ 2 ohms, 685 watts @ 4 ohms, 400 watts @ 8 ohms
30 watts
683 @ 1/8 Power into 2 ohms, 512 @ 1/8 Power into 4 ohms
Temperature dependant variable speed 80 mm DC fan
2 rear panel attenuators
2 DDT (clip limiting), 2 Signal presence, 2 Active status, 2 Temp
Thermal, DC, turn-on bursts, subsonic, incorrect loads.
Dual four pin Euro connectors, Barrier Strip speaker output, 15 amp IEC mains
16 ga. steel reinforced with 12 ga. rack ears
88.4 mm x 483 mm x 347.7 mm, 342.9 mm behind rear mounting ears
(3.48” x 19” x 13.688”, 13.5” behind rack ears)
28.3 lbs. (12.84 kg)
23.0 lbs. (10.43 kg)
ICA™ SERIES
INDUSTRIAL COMMERICAL AMPLIFIERS
Bringing Unprecedented Value & Flexibility to the Contracting Market.
Bringing unprecedented value and flexibility to the
contracting market, ICA Series amplifiers are designed to
drive 4-ohm outputs, 70.7-volt outputs and 100-volt outputs.
70.7- and 100-volt outputs can be driven directly, eliminating
the need for transformers or autoformers. These amplifiers
cover almost every installed or distributed sound power
requirement imaginable.
ICA Series amplifiers are ruggedly built from high-quality
components and feature comprehensive protection circuits
to protect your amplifier from real-world occurrences.
t-PBE'BVMU$PSSFDUJPOJOTUBOUMZSFEVDFTDIBOOFMHBJOUPBMMPX
UIFBNQMJöFSUPPQFSBUFBUBTBGFMFWFMJOUPBOBCOPSNBMMPBE
t'BEF*O1SPUFDUJPOMFBWFTUIFTQFBLFSMPBEEJTDPOOFDUFEVOUJM
UIFBNQMJöFSEFUFSNJOFTUIBUUIFPQFSBUJOHTUBUVTJTOPSNBM
t%$WPMUBHFQSPUFDUJPOEFUFDUT%$WPMUBHFPSTVCTPOJDTJHOBMTBU
PVUQVUUFSNJOBMT
t5IFJOQVUDPOOFDUPSBDDFQUTCBMBODFEBOEVOCBMBODFEBVEJP
TJHOBMT
t4FRVFOUJBM5VSO0ODPOOFDUPS
Model
Frequency Response
THD
+N
S/N
Ratio
Output Power
Agency
Approvals
Operating
Voltage
ICA® 2400V
10 Hz-25 kHz +0 -3 dB
<0.025%
-115 dB
1200 watts @ 4 ohm
UL,CUL,CE
120/240
IICA® 400V
10 Hz-25 kHz, +0 -3 dB
<.01%
>-110 dB
volt RMS –70 volt
200 watts/ch.
5.25” H x 19” W x 16.4 D
(45 lbs)
3.48" H x 19" W x 16.4" D
(31 lbs)
UL,CUL,CE
116 volt RMS-100V
120/240
ICA® 2400V
The ICA amplifiers are available as “V” versions. The ICA “V” Series is designed specifically for 70
Volt and 100 Volt (export) distributed audio systems, without the need for a transformer.
The goal for the ICA series of amplifiers is to give a way to cost-effectively compete in the modern contracting market. The complete series is offered in both low and high impedance output configurations,
and all ICA series amplifiers offer “green” features such as sequential turn on/off and Hibernation. This
unit also includes full protection from heat, shorts and DC.
Features:
• Front panel status LEDs
• Load Fault Correction™ (LFC)
• Hibernation™
• Initialized Protection™ (IP)
• Thermal, short circuit and DC voltage protected
• Sequential turn on/off
• Aggessively priced vs. similar products
ICA 2400V - Pg. 1
ICA® 2400V
Rated power (both channels driven):
Minimum load impedance:
Maximum RMS voltage swing:
Frequency response:
Power bandwidth:
THD
SMPTE IMD:
Slew rate:
Damping factor:
Input CMRR:
Voltage Gain:
Input Sensitivity:
Input Impedance:
Hum and Noise:
Crosstalk:
Power consumption @ 1/8 power:
Power consumption @ 1/3 power:
Idle power consumption:
Maximum power consumption:
Thermal emissions (BTU/hr.):
Cooling:
Controls:
Indicator LEDs:
Protection:
Connectors:
Construction:
Dimensions:
Gross weight:
Net Weight:
1200 Watts @ 20 Hz - 20 kHz both channels driven at <0.1% THD
4 Ohms
95 Volts
10 Hz - 25 kHz; +0, -.3 dB at 1 Watt
10 Hz – 50 kHz; +0, -3 dB at rated power
(2 channels driven) <0.025% @ 1200 W @ 1 kHz with both channels driven
<0.1% 60 Hz and 7 kHz, 800 W @ 8 Ohms
35 V/μs
>250:1 @ 20 Hz - 1 kHz
> -65 dB @ 1 kHz
x40 (32 dB)
1.73 volts @ 4 Ohms, 2 volts @ 8 Ohms
20 k Ohms, balanced
> -115 dB, “A” weighted referenced to rated power
-55dB, “A” weighted referenced to rated power
575 W
1,185 W
35 VA in standby mode
2,760 VA (time limited by breaker)
1830 @ 1/3 power, 940 @ 1/8 power
120 mm DC fan, off until heatsinks reach 45o C, then variable speed
2 rear panel attenuators, sequential turn-on / off
2 Clip, 2 Signal, 2 LFC, 1 Protect, 1 Power
Temp, DC, turn-on bursts, subsonic, incorrect load or short
8-pin plugable signal input, 4-pin plugable sequential power, 4-terminal barrier strip,
IEC AC
All-steel; 16 gauge chassis, 18 gauge top, 12 gauge rack ears
5.25” x 16.4” x 19” (133 mm x 416.6 mm x 483 mm)
51.4 lbs. (23.3 kg)
45 lbs. (20.4 kg)
ARCHITECTURAL AND ENGINEERING SPECIFICATIONS - The power amplifier input comes standard with plugable-input
connectors and individual channel rotary attenuators. The unit has LED indicators to show power, activity and SPS™ compression,
and also has a rear panel level control. The ICA series is packaged in a rugged, all-steel 16 gauge chassis, with 18 gauge top and 12
gauge rack ears. The dimensions are 5.25” high by 16.4” wide by 19” deep. The unit operates from standard 120 Volts AC, 60 Hz
power. The internal power amplifier delivers 800 Watts into a 70 Volt line, with rated power from 20 Hz to 20 kHz ±0.1% THD
(both channels driven into rated output). The signal-to-noise is >-110 dB, “A” weighted, referenced to rated power.
ICA 2400V - Pg. 2
13 August 2005
05/2011
ICA® 400V
The ICA amplifiers are available as “V” versions. The ICA “V” Series is designed specifically for 70
Volt and 100 Volt (export) distributed audio systems, without the need for a transformer.
The goal for the ICA series of amplifiers is to give a way to cost-effectively compete in the modern contracting market. The complete series is offered in both low and high impedance output configurations,
and all ICA series amplifiers offer “green” features such as sequential turn on/off and Hibernation. This
unit also includes full protection from heat, shorts and DC.
Features:
• Front panel status LEDs
• Load Fault Correction™ (LFC)
• Hibernation™
• Initialized Protection™ (IP)
• Thermal, short circuit and DC voltage protected
• Sequential turn on/off
• Aggessively priced vs. similar products
ICA 400V - Pg. 1
ICA® 400V
Rated power (two channels):
Minimum load impedance:
Maximum RMS voltage swing:
Frequency response:
Power bandwidth:
200 Watts @ 20 Hz - 20 kHz both channels driven at <0.1% THD
ICA 400V-70: 25 Ohms, ICA 400V-100: 50 Ohms
ICA 400V-70: 86 Volts, ICA 400V-100: 116 Volts
10 Hz - 25 kHz; +0, -.3 dB at 1 Watt
ICA 400V-70: 10 Hz - 100 kHz; +0, -3 dB at rated power
ICA 400V-100: 10 Hz - 50 kHz; +0, -.3 dB at rated power
THD (two channels driven):
ICA 400V-70: <0.1% @ 200 W from 20 Hz - 20 kHz
ICA 400V-100: <0.15% @ 200 W from 20 Hz - 20 kHz
SMPTE IMD:
<0.1% 60 Hz and 7 kHz, 200 W
Slew rate:
ICA 400V-70: 30 V/μs, ICA 400V-100: 40 V/μs
Damping factor:
ICA 400V-70: >1,000:1 @ 20 Hz - 400 Hz, ICA 400V-100: >2,000:1 @ 20 Hz - 400 Hz
Input CMRR:
> -65 dB @ 1 kHz
Voltage Gain:
x40 (32 dB)
Input Sensitivity:
ICA 400V-70: 1.77 volts for rated output, ICA 400V-100: 2.5 volts for rated output
Input Impedance:
20 k Ohms, balanced
Hum and Noise:
> -110 dB, “A” weighted referenced to rated power
Crosstalk:
ICA 400V-70: >-70 dB, “A” weighted referenced to rated power
ICA 400V-100: >-65 dB, “A” weighted referenced to rated power
Power consumption @ 1/8 power: ICA 400V-70: 4 amps, ICA 400V-100: 3 amps
Power consumption @ 1/3 power: ICA 400V-70: 5 amps, ICA 400V-100: 5 amps
Idle power consumption:
ICA 400V-70: .5 amps in Standby Mode, ICA 400V-100: .5 amps in Standby Mode
Maximum power consumption:
ICA 400V-70: 8 amps for rated power, ICA 400V-100: 7 amps for rated power
Thermal emissions (BTU/hr.):
500 @ 1/3 power, 350 @ 1/8 power
Cooling:
80 mm DC fan, off until heatsinks reach 45o C, then variable speed
Controls:
2 rear panel attenuators, sequential turn-on / off
Indicator LEDs:
2 Clip, 2 Signal, 2 LFC, 1 Protect, 1 Power
Protection:
Temp, DC, turn-on bursts, subsonic, incorrect load or short
Connectors:
8-pin plugable signal input, 4-pin plugable sequential power, 4-terminal barrier strip, IEC AC
Construction:
All-steel; 16 gauge chassis, 18 gauge top, 12 gauge rack ears
Dimensions:
3.48” x 16.4” x 19” (88.4 mm x 416.6 mm x 483 mm)
Gross weight:
33.5 lbs. (15.2 kg)
Net Weight:
31 lbs. (14 kg)
ARCHITECTURAL AND ENGINEERING SPECIFICATIONS - The power amplifier input comes standard with plugable-input
connectors and individual channel rotary attenuators. The unit has LED indicators to show power, activity and SPS™ compression,
and also has a rear panel level control. The ICA series is packaged in a rugged, all-steel 16 gauge chassis, with 18 gauge top and 12
gauge rack ears. The dimensions are 3.48” high by 16.4” wide by 19” deep. The unit operates from standard 120 Volts AC, 60 Hz
power. The internal power amplifier delivers 200 Watts into a 70 Volt line or 100 Volt line, with
rated power from 20 Hz to 20 kHz ±0.1% THD (both channels driven into rated output). The signal-to-noise is >-110 dB, “A”
weighted, referenced to rated power.
13 August 2005
05/2011
80305038
ICA 400V - Pg. 2
QUADRA® SERIES
COMPACT TWO-WAY SYSTEMS
KZghVbdjci(*
VcY,%bdjci^c\
]VgYlVgZVkVâVWaZ
^cWaVX`dgl]îZ
IgVeZod^YVa9Zh^\c[dg:Vhn6ggVn^c\
2VBESB¥
2VBESB¥
2VBESB¥
t2VBESBUJDUISPBUHFPNFUSZIPSO
tXBUUTQSPHSBNXBUUTQFBL
t4PVOE(VBSE™ tweeter protection
tIFBWZEVUZXPPGFS
t95™ 1.4" titanium compression
driver
t5PQIBOEMFBOECPUUPNTUBOENPVOU
t5PQBOECPUUPNøZJOHQPJOUJOTFSUT
t4DSFXUFSNJOBMDPOOFDUJPOT
t4PVOE(VBSEUXFFUFSQSPUFDUJPO
tw#89#MBDL8JEPX¥w7$XPPGFS
t39™22 2” titanium compression driver
t.VMUJQMFIBOEMFTBOECPUUPNTUBOE
mount
t4DSFXUFSNJOBMBOE4QFBLPO¥
connections
t4PVOE(VBSEUXFFUFSQSPUFDUJPO
tw#89#MBDL8JEPXw7$XPPGFS
t39wUJUBOJVNDPNQSFTTJPOESJWFS
t.VMUJQMFIBOEMFTBOECPUUPNTUBOE
mount
t4DSFXUFSNJOBMBOE4QFBLPO
connections
Model
Frequency Response
Power Handling
Sensitivity
Impedance
Dimensions
Weight
Quadra® 10
250 watts continuous
500 watts program
1,000 watts peak
96 dB 1w/1m
8 ohm
(F) 18.75" H x 14" W x 13.19" D
(R) 16.69" H x 8" W x 13.9" D
31 lbs.
Quadra® 12
1000 watts program
2,000 watts peak
99 dB 1w/1m
8 ohm
(F) 23.65" H x 17.75" W x 14" D
(R) 22.25" H x 10" W x 14" D
45 lbs.
Quadra® 15
1,000 watts program
2,000 watts peak
100 dB 1w/1m
8 ohm
(F) 28.50" H x 21.25" W x 17.25" D
(R) 26.75" H x 11.63" W x 17.25" D
56 lbs.
STADIA™ III SERIES
COMPACT TWO-WAY SYSTEM
t'VMMSBOHFUXPXBZTZTUFN
twOFPEZNJVNNBHOFUXBUFSSFTJTUBOUXPPGFS
t8QSPHSBNQPXFSIBOEMJOHPINNPEF
t39UJUBOJVNEJBQISBHNDPNQSFTTJPOESJWFS
UXFFUFS
t5XFFUFSQSPUFDUJPODJSDVJUJODMVEFE
t.PMEFEQMBTUJDUSBQF[PJEBMFODMPTVSF
t)PSODPWFSBHFQBUUFSO¡CZ¡
t#VJMU*O77USBOTGPSNFSXJUI88
8BOE8UBQT
t*OQVUWJBTDSFXUFSNJOBMTDBOCFXJSFEGPS
PINJOQVU
t8FBUIFSSFTJTUBOUEFTJHOXJUIQPMZGBCSJD
DPWFSFEHSJMMF
t7FOUFEDBCJOFUXJUIIJöTPVOEWPJDJOH
t5XPTFUTPGCSBDLFUNPVOUJOTFSUT
t"WBJMBCMFJOCMBDLPSJWPSZNPEFMT
>iZbCjbWZg/%%*-)..%"7aVX`
>iZbCjbWZg/%%*-*%%%"L]îZ
Model
™
Stadia III
Frequency Response
Power Handling
Sensitivity
Impedance
400 watts program
800 watts peak
94 dB 1w/1m
8 ohm
Dimensions
(F) 22.06” H x 14.88” W x 11.25” D
(R) 22.06” H x 9.70” W x 11.25” D
Weight
25 lbs.
WS™ 82T / WS™ 52T
CEILING / WALL SPEAKER
845$FJMJOH8BMM4QFBLFS
845$FJMJOH8BMM4QFBLFS
tXBUUTQSPHSBNQPXFSIBOEMJOH
t&BTZBUUSBDUJWFJOTUBMM
t&BTZBUUSBDUJWFJOTUBMM
t845JODMVEFTWPMUUSBOTGPSNFS
t845JODMVEFTWPMUUSBOTGPSNFS
t/PTPMEFSJOHOPDSJNQJOH
t/PTPMEFSJOHOPDSJNQJOH
tw)Yw8Yw%PVUTJEF
tw)Yw8Yw%PVUTJEF
Model
Frequency Response
Power Handling
Sensitivity
Impedance
Dimensions
Weight
™
WS 52T
68 Hz to 17 kHz
50 watts Continuous
100 watts Program
88 dB 1w/1m
8 ohm
11" H x 7.3125" W x 2.5" D
(outside)
3.4 lbs.
WS™ 82T
58 Hz to 18 kHz
75 watts Continuous
150 watts Program
89 dB 1w/1m
8 ohm
14.125" H x 10.125" W x 3.5" D
(outside)
4.8 lbs.
PHR™ SERIES CEILING SPEAKERS
BECAUSE SOMETIMES IT’S BETTER TO BE HEARD AND NOT SEEN.
Designed to provide high performance in a very compact
footprint, the Architectural Acoustics® PHR™ series in-ceiling
mountng enclosures appeal to both system designers and
architects. PHR in-ceiling mount enclosures are ideal for
high-intelligibility voice, music and signal reproduction
in commercial, industrial and institutional applications.
A tap selector switch allows for easy system tuning and
configuration for 70- or 100-volt distributed systems. A full
selection of taps up to 60 watts (model dependent) and an
8-ohm transformer bypass setting are included for maximum
system versatility. The UL-compliant enclosure is constructed
of high-impact, injection-molded plastic and includes a
press-fit grille design that blends well with contemporary
architecture.
PHR series enclosures are housed in steel backing cans and
include two color-coded, screw-locked flying leads in a
wiring chamber to allow for easy system wiring and "daisy
chain" wiring to additional PHR enclosures.
1)3
1)3
.FUBM$BO$FJMJOH4QFBLFS
Frequency Response: 115 Hz to 13.5 kHz, +/- 4 dB
Power Handling: Thru Mode 40W, Transformer Taps
Frequency Response: 90 Hz to 20 kHz, +/- 4 dB
Power Handling: Thru Mode 50W, Transformer Taps
10W, 5W, 2.5W, 1.25W, 0.63W (70V), 100V capable
rubber surround, 1” duo-dome polymer tweeter
with phase plate
Crossover Frequency: 4 kHz
Outside Dimensions: 7.9” x 7.87” (Outermost Diameter x Overall Depth)
Cutout Diameter: 6.57”
Enclosure:High-impact polystyrene with removable locking installation arms;
back can of formed steel; conduit-capable clamp for wiring; wiring chamber
with screw lock; perforated metal grille with inner fabric liner for ‘blackout.’
30W, 15W, 7.5W, 3.75W, 1.9W (70V), 100V capable
Sensitivity: 89 dB SPL, 1m, 1W (8 ohms nominal in
Thru Mode)
Components: 6.5” woofer with 1” VC, PP cone and rubber surround, 3/4” soft dome tweeter
Crossover Slopes: 12 dB/oct. for tweeter, 6 dB/oct. for woofer
Cutout Diameter: 8.8”
back can of formed steel; conduit-capable clamp for wiring; wiring chamber with
screw lock; perforated metal grille with inner fabric liner for ‘blackout.’
C-shaped backing plate support included
UL compliant
UL compliant
Sensitivity: 86 dB SPL, 1m, 1W (8 ohms nominal in
Thru Mode)
Components: 4” woofer with 1” VC, PP cone and
1)3
1)3446#
$BO$FJMJOH4QFBLFS
Frequency Response: 80 Hz to 20 kHz, ± 4 dB
Power Handling: Thru Mode 90W,
Frequency Response: 55 Hz to 100 Hz, ± 6 dB,
Transformer Taps 60W, 30W, 15W, 7.5W,
3.75W (70V), 100V capable
Sensitivity: 91 dB SPL, 1m, 1W (8 ohms
nominal in Thru Mode)
Components: 8” woofer with 1.2” VC, PP cone
and rubber surround, 3/4” soft dome tweeter
Crossover Slopes: 12 dB/oct. for tweeter, 6 dB/oct. for woofer
Cutout Diameter: 11”
Enclosure: High-impact polystyrene with removable locking installation arms;
back can of formed steel; conduit-capable clamp for wiring; wiring chamber
with screw lock; perforated metal grille with inner fabric liner for ‘blackout.’
Power Handling: Thru Mode 100W,
45 Hz @ -10 dB
UL compliant
UL compliant
Item Number: 00595950 - Black
Item Number: 00595930 - White
Model
Frequency Response
Transformer Taps 60W, 30W, 15W, 7.5W,
3.75W (70V), 100V capable
Sensitivity: 89 dB SPL, 1m, 1W (8 ohms
nominal in Thru Mode)
Components: 8” woofer with 1.2” VC, PP cone
and rubber surround
Crossover Frequency: 120 Hz
Crossover Slope: 18 dB/oct.
Cutout Diameter: 14”
back can of formed steel; conduit-capable clamp for wiring; wiring chamber with
screw lock; perforated metal grille with inner fabric liner for ‘blackout.’
Power Handling
Sensitivity
Impedance
Dimensions
Weight
PHR™ 410
115 Hz to 13.5 kHz, +/- 4 db
Thru mode 40W, Transformer Taps 10W, 5W,
2.5W, 1.25W, 0.63W (70V), 100V capable
86 dB SPL, 1w/1m
8 ohm
nominal in Thru mode
7.9” x 7.87” D (outside)
6.57” Cutout Diameter
4.6 lbs.
PHR™ 630
90 Hz to 20 kHz, +/- 4 db
7.5W, 3.75W, 1.9W (70V), 100V capable
86 dB SPL, 1w/1m
8 ohm
10.2” x 8.6” D (outside)
8.8” Cutout Diameter
7.6 lbs.
PHR™ 860
80 Hz to 20 kHz, ± 4 db
15W, 7.5W, 3.75W (70V), 100V capable
91 dB SPL, 1w/1m
8 ohm
12.44” x 11.3” D (outside)
11” Cutout Diameter
12.5 lbs.
PHR™ 860S Sub 55 Hz to 100 kHz, ± 6 db
45 Hz @ -10 db
15W, 7.5W, 3.75W (70V), 100V capable
89 dB SPL, 1w/1m
8 ohm
15.75” x 12.75” D (outside)
14” Cutout Diameter
14.5 lbs.
QW® SERIES
WORLD-CLASS TOURING AND INSTALLATION ENCLOSURE FEATURING
EXCLUSIVE QUADRATIC THROAT WAVEGUIDE™ TECHNOLOGY.
Peavey designed the QW® Series for pristine live and program
audio reproduction in high-end productions and large
venues. QW enclosures include advanced audio technology
and components such as our exclusive Quadratic Throat
Waveguide™ horn, 44XT™ titanium diaphragm compression
driver and Pro Rider® and Low Rider® woofers, plus very low
power compression, low distortion at high output levels,
Hammer Head™ exteriors and 16-gauge, powder-coated,
perforated steel grilles.
1BUFOUFE2VBESBUJD5ISPBU8BWFHVJEF5FDIOPMPHZ
Peavey developed its exclusive Quadratic Throat Waveguide
In horns using our Quadratic Throat Waveguide, the sound originates
technology to eliminate the distortion caused by loudspeaker horns
at the same physical point, allowing a smooth transition from driver
when pushing high sound-pressure levels (SPL).
to horn. The shape allows the sound waves to travel unencumbered
Rectangular horns have a vertical axis and a horizontal axis, and the
through the horn and always at right angles to the horn walls, which
sound travels along these axes. However, the sound originates at
transmit the sound waves with virtually no distortion—delivering
different points within the horn, and when the horn pattern is not
crisp, clear sound directly to your audience.
symmetrical—as with 60° x 40° or 60° x 90° horns—the transition of
sound from the driver to the wall of the horn produces distortion.
28¥'
28¥'
5XP8BZ'VMM3BOHF
5XP8BZ.JE)JHI3BOHF
tXBUUTQSPHSBNQPXFS
tXBUUTQSPHSBNQPXFS
t'FSSPøVJEDPPMFE$)¥RUDPOTUBOUEJSFDUJWJUZIPSOFNQMPZT
PVSQBUFOUFE2VBESBUJD5ISPBU8BWFHVJEFUFDIOPMPHZ
t95)'ESJWFSXJUI4PVOE(VBSE
t1BUFOUFE95UJUBOJVNDPNQSFTTJPOESJWFS
t"MMOFX1SP3JEFS¥wXPPGFS
t5XPw#89)&XPPGFSTXJUIwWPJDFDPJMT
twQSFNJVNHSBEFQMZXPPEDPOTUSVDUJPO
t'SFRVFODZSFTQPOTF)[UPL)[
t)BNNFS)FBECMBDLQPMZVSFBöOJTI
t.BYJNVNDPODFSUQPXFS
tHBVHFQPXEFSDPBUFETUFFMHSJMMF
t%FTJHOFEGPSQSPGFTTJPOBMCJBNQBQQMJDBUJPOT
t4"QPMFNPVOUTUBOEBEBQUFS
t5XPGVMMSBOHFBOEUXPCJBNQ/FVUSJL¥4QFBLPO¥DPOOFDUPST
28¥'
4VCXPPGFS
tXBUUTPGQSPHSBNQPXFS
¥
28 '
t%VBMEJSFDUSBEJBUJOH-PX3JEFS¥wIJHIQPXFSFEXPPGFST
5XP8BZ'VMM3BOHF
t'MZBCMFWFSTJPOBWBJMBCMF
t#JBNQBCMF
t/FVUSJL4QFBLPODPOOFDUPST
tXBUUTQSPHSBNQPXFS
28¥
t%VBMBMMOFX1SP3JEFSwXPPGFST
4VCXPPGFS
tXBUUTPGQSPHSBNQPXFS
t$PNQBDUBOEMJHIUXFJHIUEFTJHO
t5XPGVMMSBOHFBOEUXPCJBNQ/FVUSJL4QFBLPODPOOFDUPST
t%JSFDUSBEJBUJOH-PX3JEFSwIJHIQPXFSFEXPPGFS
¥
28 .-BOE.3
5XP8BZ'VMM3BOHF
t1PMFNPVOUTUBOEBEBQUFS
tXBUUTQSPHSBNQPXFS
t/FVUSJL4QFBLPODPOOFDUPST
t1SP3JEFSwIJHIQPXFSXPPGFS
50054*&40/#30"%8":
'FBUVSJOHUIF28¥4FSJFT
The star-making stage at the legendary
Tootsie’s Orchid Lounge on Broadway in
Nashville boasts a state-of-the-art QW
pro audio system from Peavey.
t4"CMBDLQPMFNPVOUTUBOEBEBQUFS
Item Number: 00571320 QWML / 00571330 QWMR
Model
Frequency Response
Sensitivity
Impedance
Dimensions
Weight
QW® 1F
200 Hz to 18 kHz, ±3 dB
1,200 watts program; 2,400 watts peak
Power Handling
101 dB 1w/1m
4 ohm MF
8 ohm HF
(F) 48.5" H x 21" W x 30.38" D
(R) 48.5" H x 10.38" W x 30.38" D
154 lbs.
QW® 2F
97 dB 1w/1m
8 ohm
(F) 33.38" H x 21.13" W x 22.59" D
(R) 33.38" H x 13.78" W x 22.59" D
98 lbs.
QW® 4
1,400 watts continuous
100 dB 1w/1m
4 ohm
(F) 49.25" H x 21.13" W x 22.69" D
(R) 49.25" H x 13.78" W x 22.69" D
136 lbs.
QW® 118
47 Hz to 1.5 kHz, ±3 dB
97 dB 1w/1m
8 ohm
28.38" H x 21" W x 26.75" D
85 lbs.
QW® 218
47 Hz to 1.5 kHz, ±3 dB
100 dB 1w/1m
8 ohm
49" H x 21" W x 26.75" D
147 lbs.
QW® ML/MR
97 dB 1w/1m
8 ohm
17.75" H x 29.75" W x 21.25" D
85 lbs.
IMPULSE® SERIES
PREMIUM LIGHTWEIGHT, WEATHER-RESISTANT MOLDED ENCLOSURES.
Renowned for their durable construction, high power handling and superior, exclusive technologies—including fieldreplaceable speaker baskets and DDT™ speaker protection in powered models—it’s no wonder why Impulse® speakers are so
widely used in so many diverse applications.
*NQVMTF¥
*NQVMTF¥5
4NBMM'VMM3BOHF4ZTUFN
4NBMM7PMU'VMM3BOHF
tXBUUTQSPHSBNQPXFS
IBOEMJOH
t5XPXBZTZTUFN
t8FBUIFSSFTJTUBOU
tXBUUXBUUXBUUBOE
XBUUUBQT
t)JöTPVOE
t8FBUIFSSFTJTUBOU
t8IJUFPSCMBDL
t)JöTPVOE
t0QUJPOBMJOTUBMMCSBDLFU
477FSTBNPVOU
t"WBJMBCMFJOXIJUFPSCMBDL
477FSTBNPVOU
*NQVMTFT
4IJFMEFE'VMM3BOHF4ZTUFN
t)JöTPVOE
t.BHOFUJDBMMZTIJFMEFE
t0QUJPOBMJOTUBMMCSBDLFU7FSTBNPVOU
Model
Power Handling
Sensitivity
Impedance
Dimensions
Weight
Impulse® 6
Frequency Response
70 Hz to 20 kHz
50 watts Continuous
100 watts program
84 dB 1w/1m
8 ohm
11.5” H x 7.5” W x 3.5” D
6 lbs.
Impulse® 6T
70 Hz to 20 kHz
5 watt, 10 watt, 15 watt
and 35 watt taps
83 dB 1w/1m
70 volt
11.5” H x 7.5” W x 6.5” D
8 lbs.
Impulse® 652S
60 Hz to 18 kHz
350 watts program
91 dB 1w/1m
4 ohm
15.5” H x 10.25” W x 9.88” D
12 lbs.
*NQVMTF¥
5XPXBZ4QFBLFS4ZTUFN
tXBUUTQSPHSBNQPXFS
IBOEMJOH
t8FBUIFSSFTJTUBOU
*NQVMTF¥**
5XPXBZ4QFBLFS4ZTUFN
tXBUUTDPOUJOVPVTXBUUT
QSPHSBNXBUUTQFBL
t8FBUIFSSFTJTUBOU
t)JöTPVOE
t)JöTPVOEDIBSBDUFS
t8IJUFPSCMBDL
477FSTBNPVOU
t#VJMUJOTUBOEBEBQUFS
t0QUJPOBM*NQVMTF13
DPWFSBWBJMBCMF
*NQVMTF¥
5XPXBZ4QFBLFS4ZTUFN
t8FBUIFSSFTJTUBOU
t)JöTPVOE
t8IJUFPSCMBDL
477FSTBNPVOU
t0QUJPOBM*NQVMTF13
DPWFSBWBJMBCMF
Model
Sensitivity
Impedance
Dimensions
Weight
Impulse® II
Frequency Response
100 Hz to 20 kHz
50 watts continuous,
100 watts program, 200 watts peak
Power Handling
90 dB at 1w/1m
16 ohms
15” H x 9.25” W x 10” D
7.00 lbs.
Impulse® 1015
60 Hz to 18 kHz
+/- 3 dB
1000 watts program
2000 peak
100 dB at SPL 1w/1m
8 ohms
30” H x 24.25” W x 18.875” D
48.50 lbs.
Impulse® 1012
72 Hz to 18 kHz
1000 watt
99 dB at 1w/1m
8 ohm
27.25” H x 17.37” W x 21.25” D
44.60 lbs.
DISTRO™
POWER DISTRIBUTION SYSTEM
Specially designed for touring sound reinforcement systems, the
Peavey Distro™ distributes up to 80 amps of current to multiple circuits.
The Peavey Distro can be installed into any amp rack, eliminating the
need to find individual outlets for multiple amplifers each time the
rack is relocated and used. Using the Distro references all equipment
plugged into it to a single ground, reducing ground related issues
that are caused by tying equipment to multiple services.
t"UPUBMMPBE
t4JYBNQDJSDVJUT
t)JHI*OSVTI.BHOFUJD$JSDVJU#SFBLFST4XJUDI(SBEF
t1MVHTJOUPTUBOEBSE/&."TPDLFU3BOHF1MVH
t$PNQBDU6QBDLBHF
t4ZTUFNXJMMNPVOUJOTUBOEBSEwSBDLT
t8FJHIUMCT
t%JNFOTJPOTw)Yw8Yw%
Distro™
1PXFS%JTUSJCVUJPO4ZTUFN
4QFDJBMMZEFTJHOFEGPSUPVSJOH4PVOE3FJOGPSDFNFOUTZTUFNTUIF1FBWFZ%JTUSPEJTUSJCVUFTVQUP"NQTPGDVSSFOUUPNVM
UJQMFDJSDVJUT5IF1FBWFZ%JTUSPDBOCFJOTUBMMFEJOUPBOZBNQSBDLFMJNJOBUJOHUIFOFFEUP¾OEJOEJWJEVBMPVUMFUTGPSNVMUJQMF
BNQMJ¾FSTFBDIUJNFUIFSBDLJTSFMPDBUFEBOEVTFE6TJOHUIF%JTUSPSFGFSFODFTBMMFRVJQNFOUQMVHHFEJOUPJUUPBTJOHMF
HSPVOESFEVDJOHHSPVOESFMBUFEJTTVFTUIBUBSFDBVTFECZUZJOHFRVJQNFOUUPNVMUJQMFTFSWJDFT
'&"563&4
"UPUBMMPBE
4JYBNQDJSDVJUT
)JHI*OSVTI.BHOFUJD$JSDVJU#SFBLFST4XJUDI(SBEF
1MVHTJOUPTUBOEBSE/&."TPDLFU3BOHF1MVH
$PNQBDUVQBDLBHF
$"65*0/5IFTVQQMJFEQMVHBOEDBCMFTIPVMEPOMZCFQMVHHFEJOUPBOBQQSPWFE/&."TFSWJDF5IFTFSWJDFNVTU
DPOUBJOBQSPQFSMZTJ[FEDJSDVJUCSFBLFS4IPVMEUIJTTFSWJDFOFFEUPCFJOTUBMMFEJUNVTUCFEPOFCZBMJDFOTFEFMFDUSJDJBO
1MFBTFJOTQFDUUIFJOQVUDBCMFBOEQMVHCFGPSFFBDIVTFGPSDVUTPSDSBDLTJOUIFJOTVMBUJPOBOEGPSCFOUCMBEFT1FSJPEJDBMMZ
DIFDLUIFTUSBJOSFMJFGPOUIFTVQQMZDBCMFUPNBLFDFSUBJOJUJTTOVHBOEUIBUUIFDBCMFXJMMOPUUXJTUPSDPNFMPPTF
.PVOUJOH
4ZTUFNXJMMNPVOUJOTUBOEBSESBDLT
13 August 2005
05/2011
DUAL DELTAFEX®
24-BIT EFFECTS PROCESSOR WITH DUAL EFFECTS ENGINES
The Dual DeltaFex® is like having two multi-effects units
in one. Providing powerful digital signal processing with
flexible dual audio connections in a single rack space makes
this unit perfect for studio or live applications. Dual inputs
and outputs allow for four operational modes; Series, Parallel,
Dual Mono and Sum Mono. Both Series and Parallel modes
process a stereo input signal into a stereo output signal. Dual
Mono mode configures the unit exactly like two separate
stereo effects processors. Sum Mono works the same as Dual
Mono, except it combines the two effects units into one pair
of outputs. Featuring 16 programmable effects including
multiple reverbs and delays, compressor, pitch shifter,
chorus, flanger, phaser, tremolo, rotary speaker, distortion,
exciter and karaoke (vocal eliminator), the Dual DeltaFex® is
truly two units in one. You’ll save money and space with the
Dual DeltaFex®.
tCJU4UFSFPJOQVUTBOEPVUQVUT
t4UFSFP1BSBMMFM4FSJFTBOE%VBM.POPNPEFT
tEJòFSFOUFòFDUTUZQFTGPSFBDIFOHJOFJODMVEJOHNVMUJQMF
SFWFSCTEFMBZTDPNQSFTTPSQJUDITIJGUFSDIPSVTøBOHFQIBTF
USFNPMPSPUBSZTQFBLFSXJUINPSQIJOHTQFFEDPOUSPMEJTUPSUJPO
FYDJUFSLBSBPLFBOEBEKVTUBCMFQBSBNFUFSTGPSFBDIFòFDU
t3FWFSCBOEEFMBZUBJMTDPOUJOVFXIFOFòFDUJTTXJUDIFEPò
t.JYDPOUSPM
t*OQVUBOEPVUQVUMFWFMDPOUSPMT
t%FGFBUKBDLEPVCMFTBTTQFFEDPOUSPMGPSSPUBSZTQFBLFS
t#JDPMPSDMJQ-&%
t%VBMFOHJOF%41TUFSFPFòFDUTQSPDFTTPS
Model
Dual DeltaFex®
Frequency
Response
20 Hz to 20 kHz
Input
Output
Impedance
THD+N
Impedance
S/N
Ratio
Dimensions
& Weight
Power
Requirement
100k ohm
1k ohm
Less than 0.005%
98 dB
(unweighted) minimum
1.75” H x 19” W x 8” D
(6.2 lbs)
External 16 VAC, 1.1 amp
Power Supply
Dual DeltaFex®
The Dual Deltafex® is like having two multi-effects units in one. Providing powerful digital signal processing with
flexible dual audio connections in a single rack space makes this unit perfect for studio or live applications. Dual
inputs and outputs allow for four operational modes; Series, Parallel, Dual Mono and Sum Mono. Both Series and
Parallel modes process a stereo input signal into a stereo output signal. Dual Mono mode configures the unit exactly
like two separate stereo effects processors. Sum Mono works the same as Dual Mono, except it combines the two
effects units into one pair of outputs. Featuring 16 programmable effects including multiple reverbs and delays,
compressor, pitch shifter, chorus, flanger, phaser, tremolo, rotary speaker, distortion, exciter and karaoke (vocal
eliminator), the Dual Deltafex® is truly two units in one. You’ll save money and space with the Dual Deltafex®.
&REQUENCY2ESPONSE
(ZK(Z
(EADROOM
#LIPINDICATIONATD"BEFORECLIPPING
!$AND$!#ONVERSION
2ATEK(Z
0RESETS
USERFACTORY
1UANTIZATIONBIT
3IGNALTONOISERATIO
D"UNWEIGHTEDMINIMUM
4($,ESSTHAN
)NPUTS
,EFTRIGHT
)MPEDANCE
D"VNOMINAL
D"VMAXIMUM
KOHM
D"6MAXIMUM
KOHM
13 August 2005
05/2011
CMXCMXCM
7EIGHT
LBSKGWITHPOWERSUPPLY
)MPEDANCE
0EAVEY
$IMENSIONS
v(Xv7Xv$
/UTPUTS
,EFTRIGHT
0OWER2EQUIREMENT
%XTERNAL6!#AMP0OWER3UPPLY
LBSKGWITHOUTPOWERSUPPLY
IMPULSE® 12D
THE FUTURE OF POWERED ENCLOSURES IS NOW.
The new Impulse® 12D powered enclosure features a
true ribbon driver and a 12” field-replaceable dual voice
coil premium neodymium speaker. A Woofer Servo
circuit monitors back-EMF and controls cone motion,
ensuring the cone’s movement mirrors the driving
signal from the power amp, and resulting in very low
distortion, high power handling and rock-solid lowfrequency attack. The advanced new ribbon driver—an
exclusive Peavey design based on the ribbons used in
the Peavey Versarray™ line array—provides 90° H x 30°
V coverage, with sonically transparent reproduction.
Utilizing Peavey’s revolutionary IPR™ power amplifier
technology, the Impulse 12D produces 1,200 watts
of efficient power while weighing a very lightweight
39 lbs. IPR amplifiers are designed with a lightweight
switch-mode power supply and a high-speed class D
topology that yields the highest audio resolution and
efficiency available.
The Input section features two input channels
and a line output, with a mix of I/O options such as
combination XLR-1/4” jacks, RCA and install-ready
Phoenix connections. Input channels 1 and 2 also have
mic/line source switches and gain controls. The AutoOff function automatically shuts off the power when
it no longer detects a signal, while the Line Out allows
the user to chain multiple units or send the input signal
to another source.
The DynaQ™ section offers advanced tone controls
such as Bass Enhancer, which is an overall loudness
boost; a Music/Speech switch that provides optimized
EQ settings for each audio type; and Contour, specially
configured for program music. A module bay allows for
future expansion including Wireless I/O, Delay/Time
Adjustment, Mixer Expander, Ethernet I/O and more.
Model
Impulse® 12D
Frequency Response
Low Frequency Limit
Sensitivity
Impedance
52 Hz to 20 kHz
(-3 dB Point): 60 Hz
100 dB (average)
(1W @ 1M, swept sine
input in anechoic enviroment)
10 k ohms (unbalanced)
20 k ohms (balanced line level)
2.4 k ohms (balanced mic level)
Dimensions
Front: 24.89” H x 15.63” W x15.38” D
Rear: 23.13” H x 7.50” W x13.50” D
Weight
39 lbs.
(17.7 kg)
PEAVEY IMPULSE® 12D POWERED
ENCLOSURE USES RIBBON DRIVERS
& REVOLUTIONARY IPR™ AMP
TECHNOLOGY.
The Impulse 12D is housed in a durable, injection-molded enclosure that includes a pole mount, three flying points and a
tilt-back design to facilitate use as a personal monitor.
*NQVMTF¥%
tXBUUTGSPN1FBWFZ*13QPXFSTFDUJPO
t"VUP0''DPOUSPM
t5XPJOEFQFOEFOUMZNJYFEJOQVUDIBOOFMTXJUIMFWFMDPOUSPMT
BOENJDMJOFTXJUDI
t5XPXBZCJBNQMJGJFEPQUJNJ[FEBDUJWFTFSWPESJWF
MPVETQFBLFSTZTUFN
tw1SFNJVN1FBWFZOFPEZNJVNMPVETQFBLFSXJUIEVBMWPJDFDPJM
t'JFMESFQMBDFBCMFCBTLFU
t1SPQSJFUBSZNNSJCCPOESJWFSPOBMPXDPMPSBUJPO
XBWFHVJEF
t$PNCP9-3wBOE1IPFOJYDPOOFDUPSTPODIBOOFM
t$PNCP9-3wBOE3$"DPOOFDUPSTPODIBOOFM
t9-3w534BOE1IPFOJYPVUQVUTPO-JOF0VU
t8PPGFS4FSWPUFDIOPMPHZ
t&YDMVTJWF%%5BOUJDMJQQJOHQSPUFDUJPO
t#BTT&OIBODFNFOUDJSDVJUQSPWJEFTBVUPNBUJDFRVBMMPVEOFTT
DPNQFOTBUJPO
t.PVOUJOHCBZGPSPQUJPOBMJOQVUGVODUJPONPEVMFT
t3VHHFEQPMZQSPQZMFOFNPMEFEFODMPTVSFXJUIUJMUCBDLEFTJHO
GPSNPOJUPSVTF
t1PMFNPVOUNPMEFEJO
t5PQCPUUPNBOETJEFøZJOHQPJOUJOTFSUT
t-&%DPOUSPMTXJUDI1PXFS4JHOBM0ò
tMCT
ISM™ 5Tx
TWO-WAY SPEAKER SYSTEM
The ISM™ 5Tx is a two-way speaker system based on a 4 1/2”
premium woofer and 1” polydome tweeter. The lightweight
rugged injection molded cabinet provides for use in music
or speech playback. A curved black metal perforated grille
provides driver protection and professional apperance. The
compact light weight coupled with its smooth response
makes this system especially ideal for applications where
space is in demand.
*4.¥5Y
5XP8BZ4QFBLFS4ZTUFN
t1SFNJVNwXPPGFS
twQPMZEPNFUXFFUFS
t#VJMUJOTXJUDIFEWPMUMJOF
USBOTGPSNFSXUBQTBUXXBUUT
XBUUTBOEXBUUT
tPINTOPNJOBMQPTJUJPOPOTXJUDI
tTNBMMMJHIUXFJHIUNPMEFEFODMPTVSF
t.PMEFEJONPVOUJOHJOTFSUT
Model
ISM™ 5Tx
Frequency Response
65 Hz to 20 kHz
Power Handling
60 watts (program)
Sensitivity
Impedance
Dimensions
Weight
88 dB at 1w/1m
8 ohms
5.3125” H x 8.3125” W x 5.5625” D
4 lbs.
SSE™ 110
SANCTUARY SERIES® HIGH-PERFORMANCE SUBWOOFER
Sanctuary Series SSE enclosures are designed to provide
premium sound while preserving the subtle aesthetics
of your sanctuary. These loudspeaker enclosures are
available in off-white or black to match the décor of most
worship environments, and also feature mounting and
flying inserts for arranging in virtually any location in your
sanctuary. SSE enclosures ensure the entire audio system
blends as seamlessly as possible into your sanctuary’s
architecture.
SSE
4VCXPPGFS
t)[UP)[
tw1FBWFZ1SPIJHIQFSGPSNBODFTVCXPPGFS
t&ODMPTVSFEFTJHOFEGPSøZJOHPSXBMMNPVOUJOH
JOTFSUTJODMVEFE
t'PVSQJO/FVUSJL¥BOEUXPQPTJUJPOUFSNJOBM
TIJQJOQVUTJOQBSBMMFM
t%JNFOTJPOT)Y8Y%
wYwYw
t8FJHIUMCT
SSE™ 118
SANCTUARY SERIES® HIGH-POWER FLYING SUBWOOFER
Sanctuary Series SSE enclosures are designed to provide
premium sound while preserving the subtle aesthetics
of your sanctuary. These loudspeaker enclosures are
available in off-white or black to match the décor of most
worship environments, and also feature mounting and
sanctuary. SSE enclosures ensure the entire audio system
blends as seamlessly as possible into your sanctuary’s
architecture.
SSE
'MZJOH4VCXPPGFS
t)[UP)[E#BOFDIPJD
t6TBCMFMPXGSFRVFODZMJNJUE#BOFDIPJD
)[
t1PXFSIBOEMJOH8DPOUJOVPVT8QSPHSBN8
QFBL
t41-8.BOFDIPJD
E#41tHBVHFQPXEFSDPBUFENFUBMHSJMMFXJUIQPMZDMPUIDPWFSJOH
QSPUFDUTUIFGSPOUPGUIFTZTUFNGSPNEBNBHF
t5XFMWFwUISFBEFENPVOUJOHTVTQFOTJPOQPJOUTBSF
QSPWJEFEGPSøZJOHBOENPVOUJOH
t.VMUJQMFVOJUTDBOCFBEEFEUPHFUIFSBMPOHXJUIUIF44&
TZTUFNTUPDPOTUSVDUWJTVBMMZBQQFBMJOHDMVTUFST
tNN#BMUJDCJSDIBOEQBJOUFEXJUIBEVSBCMFUFYUVSFEQBJOU
t*OQVUDPOOFDUJPOJTNBEFWJBBQJO/FVUSJL¥JOQBSBMMFMXJUIB
UFSNJOBMTUSJQ
t%JNFOTJPOT)Y8Y%
'SPOUwYwYw
3FBSwYwYw
t8FJHIUMCT
6aaHVcXijVgnHZg^Zh
heZV`ZghVgZVkVâVWaZ
^cd[[l]îZdgWaVX`
Äc^h]ZhidÄindjg
cZZYh#
SSE™ 15 / SSE™ 12/ SSE™ 10
SANCTUARY SERIES® HIGH-POWER FLYING ENCLOSURES
The SSE 10, SSE 12 and SSE 15 are designed
to be flown in order to cover as much area as
possible. All are designed for arraying. The horn
has a coverage pattern of 90° in the horizontal
axis and 40° in the vertical axis. The highs are
generated using the highly acclaimed Peavey
14XT™ titanium compression driver.
The Sound Guard™ IV tweeter protection
network is built in for driver protection.
SSE
Connections are made using a four-pin
Neutrik® Speakon® or a paralleled two-position
terminal block for additional cabinets.
These enclosures incorporates flying points
on the top and bottom for the utilization of
the Peavey Versamount™ 70 mounting bracket.
The 13 mm birch plywood cabinet are covered
with a durable acrylic polyurethane.
SSE
SSE
BLACK ITEM # 00575340
WHITE ITEM # 00575350
t5XPXBZTPVOESFJOGPSDFNFOUFODMPTVSFT
t95UJUBOJVNEJBQISBHNDPNQSFTTJPOESJWFSXJUI4PVOE(VBSE*7QSPUFDUJPOOFUXPSL
t%FTJHOFEGPSQFSNBOFOUJOTUBMMBUJPO
t4FWFOøZJOHQPJOUTTJYwGPSTVTQFOTJPOBOEPOFwGPSBOHMFBEKVTUNFOU
tNNCJSDIQMZXPPEDPOTUSVDUJPO
tPINT
Model
Frequency Response
Mounting
Unobtrusive, Flyable
Enclosures for High-Fidelity
Music Reproduction and
Spoken Word.
Power handling
Speaker
SSE™ 15
74 Hz to 17 kHz
±3 dB / 98 dB SPL @ 1W/1m
500 watts program
1000 watts peak power
Scorpion® Pro 1500+
15” woofer with 2.5” (64mm) voice coil
Mounting point
Front: 24.5” H x 17.43” W x 13.14” D
for Versamount™ 70 bracket Rear: 24.5” H x 12.14” W x 13.14” D
Dimensions
Weight
46 lbs.
SSE™ 12
79 Hz to 17 kHz
±3 dB / 98 dB SPL @ 1W/1m
500 watts program
Scorpion® Pro 1200+
12” woofer with 2.5” (64mm) voice coil
Mounting point
Front: 24.5” H x 17.43” W x 13.20” D
40 lbs.
SSE™ 10
80 Hz to 17 kHz
±3 dB / 95 dB SPL @ 1W/1m
400 watts program
Premium 10” woofer
Mounting point
Front: 19.63” H x 15.09” W x 12.12” D
29 lbs.
SSE™ 26
SANCTUARY SERIES® TWO-WAY SOUND REINFORCEMENT ENCLOSURES
The SSE 26 is a two-way system featuring the highly acclaimed SSE
Peavey 14XT titanium compression driver with a Sound 5XP8BZ4PVOE3FJOGPSDFNFOU&ODMPTVSFT
Guard™ IV tweeter protection network and two maximum- t%FTJHOFEGPSQFSNBOFOUJOTUBMMBUJPOT
t5XPQSFNJVNwXPPGFST
performance 6.5” woofers.
It is rated at 300 watts program and 600 watts peak. This
lightweight speaker system is ideal for smaller venues
where space is at a premium. Connections include a four-pin
Neutrik® Speakon® or a paralleled two-position terminal block
for additional cabinets.
t1FBWFZ95UJUBOJVNDPNQSFTTJPOESJWFS
t4PVOE(VBSE*7UXFFUFSQSPUFDUJPOOFUXPSL
t.PVOUJOHQPJOUGPS7FSTBNPVOUCSBDLFU
tXBUUTQSPHSBNXBUUTQFBLQPXFSIBOEMJOH
t)[UPL)[
tE#BU8N
tPINT
The SSE Series is available in black and off-white finishes.
BLACK ITEM # 00575400 / WHITE ITEM # 00575410
Model
SSE™ 26
Frequency Response
100 Hz to 17 kHz
94 dB @ 1W/1m
Power handling
Speaker
Mounting
300 watts program
Two premium 6.5” woofers
Mounting point
for Versamount™ 35 bracket
Dimensions
Front: 23.25” H x 9.93” W x 9.47” D
Rear: 23.25” H x 5.23” W x 9.47” D
Weight
28 lbs.
SSE™ S5
HIGH POWER, ASYMMETRICAL HORN, FULL-RANGE SYSTEM
Sanctuary Series® SSE enclosures are designed to provide
premium sound while preserving the subtle aesthetics of
your sanctuary. These loudspeaker enclosures are available
in off-white and black finishes and feature mounting and
sanctuary.
SSE4
'VMM3BOHF4ZTUFN
tw4DPSQJPO¥1MVT)0XPPGFST
t39DPNQSFTTJPOESJWFSDPVQMFEUPBOBTZNNFUSJDBMIPSOXJUI
4PVOE(VBSE***UXFFUFSQSPUFDUJPO
t'SFRVFODZSFTQPOTF)[UPL)[E#
t1PXFSIBOEMJOHXBUUTQSPHSBNXBUUTQFBL
t4FOTJUJWJUZE#XN
t/PNJOBMJNQFEBODFPIN
Available in Black or Off-White, These SSE™ Enclosures Were Engineered For Public Address
and a Wide Range of Musical Applications.
Model
Frequency Response
Power handling
Speaker
Nominal Impedance:
SSE™ S5
94 dB @ 1w/1m
800 watts program
15” Scorpion® Plus HO woofers
8 ohm
Dimensions
27.375” H x 20.625” W x 16.5” D
Weight
63 lbs.
SSE™ 6
TWO-WAY SOUND REINFORCEMENT MONITORS
The SSE™ 6 is a two-way system featuring the highly acclaimed SSE
Peavey 14XT™ titanium compression driver with a Sound t5XPXBZTPVOESFJOGPSDFNFOUFODMPTVSF
Guard™ IV tweeter protection network and a maximum- t%FTJHOFEGPSQFSNBOFOUJOTUBMMBUJPO
t1SFNJVNwXPPGFS
performance 6.5” woofer.

It is rated at 150 watts program and 300 watts peak. This
lightweight speaker system is ideal for smaller venues
where space is at a premium. Connections include a four-pin
Neutrik® Speakon® or a paralleled two-position terminal block
for additional cabinets.
t1FBWFZ95 UJUBOJVNDPNQSFTTJPOESJWFS
t.PVOUJOHQPJOUGPS7FSTBNPVOUCSBDLFU
t)[UPL)[
tE#BU8N
tPINT
The SSE Series is available in black and off-white finishes.
BLACK ITEM # 00575370 / WHITE ITEM # 00575380
Sanctuary Series SSE™ Enclosures are Designed to Provide Premium Sound While
Preserving the Subtle Aesthetics of Your Sanctuary.
Model
Frequency Response
Power handling
Speaker
Nominal Impedance:
SSE™ S5
94 dB @ 1w/1m
800 watts program
15” Scorpion® Plus HO woofers
8 ohm
Dimensions
Front: 16.41” H x 9.95” W x 9.47” D
Rear: 16.41” H x 5.23” W x 9.47” D
Weight
21 lbs.
SSE™ 12M / SSE™ 10M
TWO-WAY SOUND REINFORCEMENT MONITORS
The SSE 12M & SSE 10M are new low-profile monitor enclosures featuring high power ratings with custom components, a sleek
look and a unique, snap-in metal grille.
SSE.
SSE.
t1FBWFZ4DPSQJPO¥1SPwXPPGFSXJUIwNN
WPJDFDPJM
t1FBWFZ95UJUBOJVNEJBQISBHNDPNQSFTTJPOESJWFS
t)[UPL)[
tE#BU8N
tPINT
t.BYJNVNQFSGPSNBODFwXPPGFS
t1FBWFZ95UJUBOJVNDPNQSFTTJPOESJWFS
t)[UPL)[
tE#BU8N
t0INT
Sanctuary Series® SSE™ Enclosures are Designed to Provide Premium Sound While
Preserving the Subtle Aesthetics of Your Sanctuary.
Model
Frequency Response
Power handling
Speaker
Nominal Impedance:
SSE™ 12M
79 Hz to 17 kHz
98 dB @ 1w/1m
500 watts program
Peavey Scorpion® Pro 1200+
12” woofer with 2.5” voice coil
8 ohms
15.22” H x 24.5” W x 16.96” D
Dimensions
Weight
35 lbs.
SSE™ S5
80 Hz to 17 kHz
95 dB @ 1w/1m
400 watts program
Maximum-performance
10” woofer
8 ohms
14.56” H x 19.63” W x15.95” D
29 lbs.

Click here to

Transcription

Similar documents

ss8.5 Brochure FA

TRx115N

CARVIN ENGINEERING DATA

UN-GGIM: User case studies

presentation - SPI International

9300 Brochure R17

TRx122

Operations Supplement

Audix Brochure 2003.qxd

Second-quarter 2014 operations supplement

December CALENDAR OF EVENTS

echoSouNderS