The Hungarian Aeronautical Industry

Transcription

The Hungarian
Aeronautical Industry
Focusing on product development and collaboration
After rebirth and
reemergence,
the Hungarian
Aeronautical Industry
is in the phase of
developing new
products and services.
The last decade
brought remarkable changes to our industry
structure: new organizations, new industrial
relations, new projects, new products and
solutions were emerging every year.
Contents
In 2003 the Hungarian Aviation Industry
Foundation HAIF was founded with the
mission to become the industry catalyst
Introduction.............................................................................................................4
Aircraft development................................................................................................15
and promoter that brings together experts,
organizations, companies, industry
and academia in order to speed up the
development and growth of our lagging
aeronautical industry.
HAIF initiated and organized the
establishment of the Hungarian Aerospace
Cluster HAC in 2006 and the Hungarian
Aerospace Technology Platform HATP in
2007. By now Hungary has an aerospace
industry which employs more than 2600
people and incorporates more than 50 hightech organizations.
HUNGARIAN GOVERMENT
Ministries, HITA, NIH, Authorities
Engineering services.................................................................................................25
ting
por
Sup
Collaboration
als
pos
Pro
System development.................................................................................................73
Lobby
Part manufacturing..................................................................................................49
ding
Fou
n
n
Fou
ding
Strategy formulation
Proposals
Various....................................................................................................................43
Collaboration
Product development
Companies
Introduction
Applied research
The structure of our industry
University departments
3
As a result in 2013 a new brochure was
published introducing the Hungarian
Aeronautics R/D sector, which lists the
main actors in the research area listing
their capabilities and indicating previous
experiences in FP6/7 and Clean Sky projects.
The current publication serves as a
complementary document listing the main
actors in the manufacturing, design and
testing area of the Hungarian Aeronautical
Industry.
Our industry consists of a mix of foreign and
local companies and capable to develop
and manufacture small aircraft for General
Aviation, manufacture metal and composite
components for large aircraft and able to
develop and manufacture UAS systems for
civil and military purposes. Since 2008 more
than 30 Hungarian companies implemented
the AS9100 aerospace quality system.
In 2009 our companies debuted in the Aero
2009 Friedrichshafen Expo for the first time
as an emerging industry, exhibiting seven
new aircraft models including two composite
amphibians one acrobatic aircraft and a small
UAV. By now we manufacture 5 GA category
aircraft and have 5 other prototypes under
testing including two amphibians and a small
helicopter.
In 2010 we celebrated the 100th anniversary
of the birth of Hungarian Aviation with
two remarkable events, the debut of our new
Corvus Racer 540 aircraft in Canada at the
Red Bull Air Race and the grand opening of
our greenfield El-Tech Center in Budapest
which focuses on developing electronic
systems for aerospace applications.
We completed our strategy document in
2011, which defines the future directions
and stages of our development for the next
10 years with the focus on aircraft design for
General Aviation, UAS systems, compositeand turbine part manufacturing and
embedded system development.
Since then we could improve collaboration
between industry and academia and created
a network of R/D organizations actively
participating in EU Framework and the Clean
Sky JTI research programmes.
In order to speed up our catch up process and
to enter a higher level of development our
aim is to launch a National Take Off program
to support our aeronautical industry.
As a result a more sophisticated, diversified,
integrated high-tech vehicle industry could be
created in Hungary where the achievements
of our programs could also be used by the
other transport domains.
We believe that with the support of our
Government and our EU partners our
collaboration and diversification strategy
can be successful and our organizations
can be better integrated into the European
Aerospace Industry which in turn will help our
industry to be successful internationally.
Mihaly Hideg MBA, MSc.
Chairman of the Hungarian Aviation Industry
Foundation
Cluster manager of the Hungarian Aerospace
Cluster
www.haif.org
4
Introduction
5
The Hungarian Aerospace Cluster (HAC)
HAC was established in 2006 on the bottomup principle. It is a non-profit, private, nonlegal entity with formal membership; it is led
by three managers – two founders and the
HAIF chairman.
It has 30 members, 26 Hungarian SMEs,
three foreign subsidiaries, and one University
department.
The SMEs are 100% privately owned and
altogether have workforces exceeding 1,500
people.
The cluster is focused on product
development based on a solid engineering
background, modern software (Catia,
SolidWorks, Ansys) and young, dynamic
management.
HAC members together developed and
manufacture sport and acrobatic airplanes,
gyrocopters and are developing 5 more small
aircraft in the amphibian, helicopter and UAV
categories.
HAC has cooperation agreements with the
Aviation Valley of Poland, Hanse Aerospace
of Germany, Hungarian Ship Industry Cluster,
Hungarian Bus Manufacturing Cluster and is a
founding member of the European Aerospace
Cluster Partnership (EACP).
HAC has the following objectives:
1. Accelerate the development of the
Hungarian Aerospace Industry
2. Diversify the best parts manufacturers
into aerospace
3. Create a network of aerospace and
related industries
The Cluster capabilities cover: design & engineering, rapid
prototyping, software development, embedded systems,
metal and composite part manufacturing, wire harness
manufacturing, bowden cable manufacturing, turbine part
machining and testing.
The majority of HAC members are AS9100 certified by SGS
Hungaria Ltd. The others have either ISO 9001:2008 or
certifications from automotive industry.
4. Support the development of new
Hungarian-designed small aerospace
vehicles
5. Oversee production of these vehicles
internationally
6. Organise and develop complementary
capabilities among Hungarian firms for
the manufacture of assemblies for large
aircraft
7. Achieve synergies and economies of
scale through networking in the fields
of design, development, training,
logistics, quality (AS 9100), IT, marketing
and certification
8. Introduce modern management methods
and principles to the SME sector – six
sigma, lean manufacturing
9. Develop new supplier relationships with
other countries
10. Increase Hungarian participation in
EU-funded aerospace projects
6
Introduction
7
The Hungarian Aerospace Industry History In a Nutshell
Pál Vágó (1889-?) invented and developed
the gyroscopic stabiliser, a forerunner of
modern gyro horizons.
Emil Némethy (1867-1943) was the first
engineer in the world to use steel tubes for
aeroplanes and work with aileron areas. The
“Némethy-equation” was one of the first
mathematical solutions to calculate with great
precision the lifting ability of early aircraft.
Sándor Svachulay (1875-1955) built
an aeroplane with welded steel tubes in
1909, which proved to be a forerunner of
modern skeleton-structured aeroplanes. For
the famous Albatros, Svachulay designed a
retractable landing gear, later adapted by
several international designers. His other
inventions included the adjustable metal
propeller and a device to control landing
speed.
János Adorján (1882-1964) was the
designer and constructor of Hungary’s first
working aeroplane. His twin-cylinder “Libelle”
plane completed several successful flights in
1909 and 1910.
8
Introduction
In the early decades of modern aviation
history, engineers seeking new flying methods
probed a variety of diverse concepts. In
addition to the rigid wing “dragon” and the
ornithopter, they also experimented with
propellers rotating around a vertical shaft.
during World War I, Lieutenant-colonel
István Petróczy, professor Tódor Kármán and
Vilmos Zurovetz jointly conducted hovering
experiments with a “windmill plane”, the PKZ.
Tódor Kármán (1881-1949) is considered a
leading theoretician of aerodynamics. Kármán
analysed the flow of fluids past a cylindrical
obstacle at right angles and determined that
the wake separated into two rows creating
turbulence around them. This is manifested
in aircraft wing flutter and the oscillation of a
bridge in high wind. The concept, presented
in several papers in 1911 and 1912, came
to be known as the “Kármán vortex street”
or “Kármán vortices”. His work led to the
redesign of many structures to withstand
vibration, including modifications to the
design of ships and aircraft to adopt more
streamlined forms. Kármán’s theory on
aerodynamic bumps served as a basis for the
development of supersonic aircraft.
Oszkár Asbóth (1891-1960) performed
military service at an aircraft factory near
Vienna after the outbreak of World War
I, where he was in charge of propeller
manufacturing. He constructed and tested
some 1,500 propellers in the factory’s wind
tunnel. Ten years later, Asbóth built his first
helicopter. Powered by a 120-horsepower,
nine-cylinder engine and propelled by two
4.35 meter propellers assembled in parallel
one above the other and rotating in opposite
directions, the “AH 1” took off vertically on
September 9, 1928.
Dávid Schwartz (1845-1897), the Hungarian
inventor of the dirigible airship, used ultrathin aluminium to insulate the balloon, the
aluminium skeleton and the propellers at
the sides of the basket. Commissioned by
the German army, he constructed the first
dirigible airship in 1896, tested with partial
success at Tempelhof near Berlin, Germany,
on November 3, 1897. The propeller belts
broke, causing the pilot to lose control
and crash the airship. Schwarz died shortly
afterwards and his widow sold all patent
rights to Graf Zeppelin in 1898. Zeppelin
went on to develop a successful line of
dirigible airships which bore his name, while
that of Schwartz disappeared into oblivion.
Aladár Zsélyi (1883-1914) was the first
in Hungary to design and construct an
aeroplane based entirely on structural
engineering fundamentals. His creation
included several new concepts, including
a new control mechanism and a springmounted landing gear.
9
The re-emergence of Hungarian Aerospace
began in 2000 with the construction of a
greenfield aerospace plant by GE Engine
Services in Veresegyház. This was soon
followed by Lufthansa Technik Budapest,
Eldim, Alcoa, Elektrometall GmbH,
Flamespray, Lufthansa Systems, CAE
engineering, and Diehl Aerosystems. Together,
these companies laid the foundations for a
modern aerospace sector in Hungary.
Ernő Rubik (1910-1997) was a member
of a group of aircraft designers who were
instrumental in rebuilding the Hungarian
aircraft industry after World War I and II.
As head of the Central Experimental Plant,
he started to develop all-metal gliders with
simple structures suitable for mass production
in 1956. A family of gliders emerged, the
most successful of which was the R-26 Góbé
two-seater glider still in use for training
purposes. In 1963, Ernő Rubik was awarded
the Kossuth Prize, the highest Hungarian
state award for science, for his lifetime
achievement.
Hungary’s aerospace industry can look back
on rich traditions. There have been several
outstanding Hungarian aircraft designers and
builders who have left their mark on the early
history of aviation.
Following World War II, and the Hungarian
revolution of 1956 (against the government
and its Soviet-imposed policies) in particular,
Hungarian aerospace development was
10
Introduction
restricted to prototypes of training aeroplanes
and gliders.
Before 1992, little was made public about the
latest developments in the industry, although
Hungarian engineers played a significant
role in the research and development of
Soviet-made aircraft and supplementary
equipment.
Nevertheless, Hungarian instruments and
communications equipment have always
been used extensively in space research
and space flight.
During the 1990s, with the help of Lockhed
Martin managers Hungarian engineers and
technicians grew increasingly familiar with
advanced methods of aircraft operation,
maintenance and refurbishment. By the end
of the decade, a new group of aerospace
experts had emerged that was proficient
in English and knowledgeable of Western
practices
in the aerospace business.
GE Engine Services division is an aircraft
engine component repair shop employing
more than 220 people in Hungary. It repairs
mainly CFM56 and GE90 engine components
for global customers using advanced repair
technologies developed by GE. It was the first
greenfield aerospace plant built in Hungary
after the political changes.
Lufthansa Technik Budapest is a subsidiary
of Lufthansa Technik employing more than
300 people at Liszt Ferenc Airport was
established in 2001 as a joint venture 85
percent owned by Lufthansa Technik and
15 percent by Malév Hungarian Airlines. It
provides overhaul and painting services for
Boeing 737 and Airbus A320 type aircraft for
Lufthansa and third party customers.
ELDIM is a subsidiary of its Dutch mother
company was established as a brownfield
plant in 2002 in Debrecen the second biggest
town in Hungary. It focuses on turbine part
manufacturing using advanced laser, drilling
and welding technologies. Later it was
acquired by Sulzer Metco, and its name was
changed to Sulzer Hungaerotech Llc.
ALCOA has created a brownfield plant in
Nemesvamos in 2002 called Alcoa Fastening
Systems where it started to manufacture
high-tech fasteners for the aerospace industry.
It uses machining, heat treatment and EDM
technologies.
Elektro-Metall Export Gmbh. the German
mother company established a greenfield
plant called Elektro-Metall Paks Kft. in 2001
to manufacture wire harnesses for Airbus
aircraft. It employs more than 200 people in
Paks, in the centre of Hungary.
Flame Spray an Italian company established
a subsidiary in Gödöllő to provide advanced
coating services to the gasturbine industry.
Currently located in Szada industrial park, the
company employs about 50 people and has
NADCAP certification.
Lufthansa Systems Hungária Kft. was
established in 1995 as the first international
subsidiary of Lufthansa Systems. In the
Budapest office there are more than 600
experts developing applications for the airline
industry. Apart from the airline industry LHS
provides IT solutions for other industries as
well.
11
In 2009 CAE Engineering Ltd. acquired
Allied-Visions Ltd. which had been active
in Hungary since 1998. Currently CAE
Engineering Ltd. employs more than 80
engineers in Budapest. The company develops
solutions for civil and military flight simulation
for almost every modern airliner, for both
major and regional carriers, as well as many
of today’s business jets and helicopters
including simulation of aircraft systems.
Diehl Aerosystems, a leading partner for
aircraft cabin design and integration has set
up a production facility in Nyírbátor, Hungary
in 2011. The new company “Diehl Aircabin
Hungary Kft” a subsidiary of Diehl Aircabin,
based in Laupheim, Germany, created more
than 150 jobs in Hungary. It manufactures
cabin equipment from composites for Boeing
and Airbus aircraft.
In the early years of the millennium, three
new small aircraft design companies also
commenced eatment, operations. Using
all-composite technologies, Corvus Aircraft
Ltd., Composite One Ltd. and Waterfly Ltd.
opened a new “composite era” in the history
of the Hungarian aerospace industry. Today
there are six SMEs active in the design,
development and manufacturing of general
aviation airplane/rotorcraft categories and
3 organizations are active in the area of
unmanned aviation vehicles.
The Hungarian Aerospace Industry
(including MRO organisations) is almost
100% privately owned and currently
comprises more than 130 registered
organisations employing some 2,700 people.
12
Introduction
The Hungarian Aviation Industry
Foundation (HAIF - www.haif.org) was
established in 2003 to accelerate the
development of the sector. By organising
workshops, lobbying and bringing together
aerospace-related companies, HAIF initiated
and oversaw the creation of the Hungarian
Aerospace Cluster (HAC) in 2006, the
first aerospace industrial group in Hungary
focusing on development and manufacturing.
HAC currently has 30 members.
In 2007, HAIF launched the AS9100
aerospace quality management project for
its members in tandem with the Ministry
of Transport. More than 30 companies
participated in the project and were certified
by the end of 2011.
In September 2007, HAIF founded the
Hungarian Aerospace Technology Platform
(HATP), a third key body designed to help
research and development organisations
participate in FP7 Framework programmes,
Clean Sky programs and bring together space
and aeronautical companies in Hungary.
HATP currently lists 31 organisations as
members, including three major universities.
Since its establishment HAIF has been acting
as a managing organization for both HAC
and HATP organizations and represents them
both internationally and domestically. Its
strategic role and collaborating approach
are key success factors in the growth and
development of the Hungarian Aeronautical
Industry.
Established in 1993, the Defence Industry
Association of Hungary
(www.vedelmiipar.hu) also lists several
aerospace suppliers among its members.
13
Aircraft development
Avana Industries Ltd.
Address: 1041 Budapest, Ipari Park u. 10.
Telephone: +36 70 378 5266
Website:www.avanaind.eu
E-mail: [email protected]
Managing Director: Janos Dosa
Contact: Janos Dosa
Languages: Hungarian, English
Establishment: 2008.
Main areas of interest
1 Area of Production
Tooling, prototype development
List of products:
- 6 aerobatic and general aviation aircraft
tooling and prototypes
- 11+ mass transit bus tooling and prototypes
- The world’s only production “full composite”
bus tooling and moulds
- Several truck body and cabin tooling and
prototypes
General Aviation - the world’s fastest seaplane
development and production of parts
List of products:
- Complete design and tooling in house
- Prototype parts
Contact:
[email protected]
List of products:
Avana has made several automotive parts as
R/D engineering samples for major European
car manufacturers. This includes engine
covers, side impact crash bars, structural
elements, decor elements. In a major European
FP7 research program Avana was involved
in preform R/D for automotive short cycle
production technology.
Contact:
[email protected]
Production capabilities
General information
From 2015 Avana will open its new production
facility in SW Hungary. With over 5000 sqm
production space and 1500sqm satellite grade
clean rooms Avana will be able to produce
almost anything made from composite. With
several autoclaves Avana is able to produce
technology demanding parts for automotive,
auto sport, aerospace, defence and space
applications.
Quality System Implemented
Avana has a pending AS9100 certification for
its new facility.
- CAD /CAM turning, 3D milling, casting
- CFD/FEA rapid prototyping. 3D printing
Contact:
[email protected]
14
Development of Carbon Graphite and related
automotive preforms
15
Fly Mix
Address: 7700 Mohács, Pécsi u. 66.
Telephone: +36 69 301 120
Website:www.flymixparagliding.com
Managing Director: István Illés
Contact: István Illés
- Ultralight aeroplanes, powered paragliders
foot launching, powered paragliders trike
production
- Steel construction
- Aerial services(sightseeing flights, aerial
photograph, parachute jump)
List of products:
- Welding parts
- Machined parts
- Stainless steel construction
Contact:
Csaba Farkas
General information
- Steel metal construction
- Welding(MIG,TIG,MAG), machining
- CAE engineering
Powered paraglider trike manufacturing,
developing, prototype building, test flights
ISO 9100 in progress
16
17
Halley Ltd.
Address: 3300 Eger, Mester u. 3.
Telephone: +36 36 517 830
Website:www.halley.hu
Managing Director: Zoltan Molnar
Contact: Zsofia Nagy
Ultralight aircrafts
List of products:
- Weight shift controlled (WSC) aircraft
- Fixed winged UL aircraft
- Autogyro
Contact:
[email protected]
18
UL aircraft production with traditional, welded
and composite technology.
General information
The factory has started the production of
the powered hang gliders 30 years ago. The
production of Apollo Fox started at 1991, and
in 2001, the company introduced the new
Apollo Gyro. Today it has 25 employees in the
headquarter in Eger and has a wide range of
international distributor network, ensuring a
world-wide sale.
The company’s aircrafts are suitable for sport,
work and training.
ISO 9001-2008
19
Hungaro-Copter Ltd.
Address: 3351 Verpelét, Kossuth út 64.
Telephone: +36 30 382 8398
Website:hungarocopter.hu
Managing Director: Gabor Farkas
Contact: Gabor Farkas
Helicopter prototype development
Machining
List of products:
A one and two seat helicopter for General
Aviation and composit rotorblade
development for helicopters.
List of products:
Parts for automotive and pneumatics
Contacts:
[email protected]
Contacts:
[email protected]
CAD /CAM, CAE
CNC turning/milling
20
General information
Together with the mother company Steelriders
kft., Hungaro-Copter kft. develops and
manufactures the prototype of a one-seat
and later a two-seat conventional helicopter
for General Aviation. Our 30+ staff also
manufacture machined metal parts for other
industries.
ISO 9001:2009, ISO 14001:2005
21
Magnus Aircraft Ltd.
Address: Kecskemét
Telephone: +36 20 512 0800
Website:www.magnus-aircraft.com
SkyCruiser Autogyro Ltd.
Managing Director: Imre Katona
Contact: +36 20 511 0011
Languages: English, Hungarian, Russian
Ultra-light, LSA aircraft manufacturing
Contact:
[email protected]
22
Managing Director: József Mészáros
Contact: József Mészáros
Languages: English, Hungarian
Composite technologies
List of products:
Fusion aircraft
Address: 2131 Inárcs, Kossuth Lajos u. 104/a
Telephone: +36 30 894 7739
Website:www.skycruiser.hu
General information
Magnus Aircraft is a new founded company
which follows the route of the former Corvus
Hungary Ltd. and Corvus Aircraft Ltd. which
spent more than 9 years almost solely with
developments of special composite elements,
testing and enhanced technologies, to be able
to build the best ever full composite aircraft.
Light aircrafts
List of products:
- Autogyros
- Engineering, developing of autogyros
TYPE APPROVAL No.: LG-01-2013
date of issue: 15 January 2013 by HUNGARY
NATIONAL TRANSPORT AUTHORITY Aviation
Authority
Autogyro parts mounting test ride, etc.
General information
Our product is: type “Skycruiser SC-200”
autogyro.
23
Engineering Services
CAD-Terv Engineering Ltd.
Address: 1087 Budapest, Könyves Kálmán krt.
76. 7 floor
Telephone: +36 1 461 9000
Website:www.cadterv.hu
Managing Director: István Nadj
Contact: Edina Tóber
Languages: English, German
Engineering services
List of products:
- Machine design
- Product design
- Tool design
Contacts:
[email protected]
Dassault Systemes PLM solution
implementation and related services
List of products:
- PLM softwares (CATIA, ENOVIA, DELMIA,
SIMULIA, 3DVIA)
- Training
- Consultancy
- Support
- Sofware development
Contacts:
[email protected]
24
- CAE Engineering services: Our solutions
include engineering services (machine
design, product design) in various fields
of mechanical engineering. We offer full
handling of field-specific construction
procedures (from design to prototyping).
- Sofware development (Dassault Systemes’
PLM solutions e.g. CATIA)
- Training, education (Dassault Systemes’ PLM
solutions e.g. CATIA)
- Support (DS PLM solutions e.g. CATIA): we
are ready to assist our clients with issues
regarding modelling; using, implementing or
customising design systems; converting to 3D
systems.
- PLM solutions: Dassault Systemes’
3DExperience platform (CATIA, ENOVIA,
DELMIA, SIMULIA, 3DVIA), enabling 3D
design, engineering 3D CAD, modelling,
simulation, data management and process
management.
25
CAE Engineering Ltd.
General information
CAD-Terv Engineering Ltd. provides services
in various fields of engineering – including
special purpose machine design, equipment
or product design -, and also offers Dassault
Systemes PLM solutions, like CATIA CAD system
with product support as authorized distributor
in Hungary since 1997.
We provide overall design and construction
solutions transacting from sktech to mass
production. The utilized CAD and CAE
systems and the several years of experience in
construction ensures reliability and precision
helping to reveal potential problems in early
design phases.
26
The more than 10 years in Dassault Systemes
Authorized Reselling (CATIA design system
and other PLM solutions) covers most of the
possible areas including air and naval industry
serving our partners with complete software
support and personalized education.
Prominent partners use these solutions like
Airbus, Boeing, Lockheed Martin, Pratt &
Whitney, Aviatel Dassault, Cessna, Bombardier
Aerospace and the Sukhoi Civil Aircraft.
ISO 9001:2008 Management System Standard
Year: 2004
Address: 1122 Budapest, Ráth György u. 28.
Telephone: +36 1 225 0134
Website: www.cae.com/hungary
Managing Director: Gábor Ercsényi
Contact: Gábor Ercsényi
Establishment: 1998. (former Allied-Visions
Ltd.) -> 2009. (company acquired by CAE)
Simulations
List of products:
- 2D and 3D simulation of emergency rescue
and military situations
- Civil and military flight simulation for almost
every modern airliner for both major and
regional carriers, as well as many of today’s
business jets and helicopters
- Video and audio streaming, realtime
processing
- Creating GIS databases
- 3D modeling
- Developing of VoIP systems
- Simulation of aircraft systems
(communication, navigation etc.)
Contacts:
[email protected]
27
Training
List of products:
Providing Command and Staff training for
military officers in Europe using CAE’s combat
simulation system.
Contact:
[email protected]
Pilot selection systems
List of products:
Construction and operation of automated pilot
selection systems to measure psychological
and motoric abilities of piloting different types
of aircrafts.
Contact:
[email protected]
28
The company applies its simulation expertise
and experience to help customers enhance
safety, improve efficiency and maintain
readiness. Its pilot training programs are
designed to provide commercial aircraft,
business jets and helicopter pilots with the
highest-quality, operationally oriented training
experience. CAE full-flight simulators replicate
in every detail the cockpit of the aircraft that
they simulate. They can simulate 250 to
400 malfunctions and reproduce with great
accuracy and realism, the visual environment
the aircraft appears to be flying in, including
clouds, thunderstorms, and the landing
approaches of airports around the world.
Simulators also simulate sound and motion,
including the banking and turning of the
aircraft, accelerations, and the feel of tires as
they roll across the bumps and cracks in the
runway. Full-flight simulators allow pilots to
experience and learn emergency procedures
that cannot be practiced safely aboard the
actual aircraft. They are so realistic that a
veteran pilot will be able to train on a level D
simulator (the highest level of fidelity) and then
fly on a real aircraft with passengers.
General information
In addition to software development of
various military and civil flight simulators,
CAE Hungary has a group of content editors
creating visual databases and 3D models used
in the simulations. CAE Hungary provides
software development, integration support and
content creation solutions for CAE Healthcare,
and Presagis.
CAE Hungary (CAE Engineering Ltd.) became
part of CAE in 2009 and employs 80 people,
mainly content creators and software
developers. It has worked on major European
programs, such as the EuroFighter and Tornado
jets as well as the NH-90, C-160, A109 and
CH-53 helicopters. CAE Hungary employees
also assist in the software development of civil
aircraft full-flight simulators, like the Airbus
A320, A330, Boeing 777.
EN 9100:2009; 2010
MSZ EN ISO 9001:2009; 2009
29
Department of Aeronautics, Naval Architecture and Railway
Vehicles, Budapest University of Technology and Economics
Address: 1111 Budapest, Stoczek u. 4.
Telephone: +36 1 463 1922
Website:www.vrht.bme.hu
Managing Director: Daniel Rohacs, Dr.
Languages: Hungarian, English, French
Establishment: 1946. (university: 1782)
Flight Physics
List of products:
Major results in flight physics, aero-structure,
propulsion, simulation, control system
developments:
- Taking part in aerodynamic design of the
Corvus Racer 540 special acrobatic aircraft
- Investigation on airflow around finite wings
and helicopter rotors
- Development of a RANS solver (DAS_FLOW)
for simulation of inner and outer flows
- Aerodynamic investigation and optimization
of turboprop engine integration into the
airframe (EU supported ESPOSA project)
30
- Application of morphology for optimization of
profiles and bodies in flow
- Bifurcation analysis and chaos at the high
angle of attack dynamics
- Developing the UAVs
- New simplified model for study the wing
aeroelasticity (EU supported A2-Net-Team
project)
- Safety and security analysis of the personal
air transport
- Developing the so called rendezvous control
system
Contact:
[email protected]
Avionics and on-board system developments
Air Traffic Management and human factors
List of products:
- Conflict detection and resolution system,
passive and active conflict detection systems
- Pilot workload monitoring system (planned to
include into the CleanSky2)
- Developing sensors and actuators for UAVs,
small, personal and sport aircraft
- Developing the ground and on-board systems
for improving the landing process in bad
weather conditions
- Two licenses: “Operator centric integrated
monitoring system for machines and
vehicles”, and “ Embedded Flight Instrument
System”
List of products:
- Developing the non-cooperative target
classification methods (EU supported SINBAD
project),
- Investigation on the integration of the small
and personal aircraft and UAVs into the new
ATM system
- Using the methods of subjective analysis
to investigation of the operator situation
awareness and decision making
- Developing the air traffic controller workload
monitoring system, integration of the MEMS
based sensors into the working environment
- Development of flight profile rebuilding
software
Contact:
[email protected]
Contact:
[email protected]
31
About 30 contract based and national
research projects for last 5 years, Important
International projects:
CREATING: Concepts to Reduce Environmental
impact and Attain optimal Transport
performance by Inland NaviGation
(EU FP6 – STREP), 2003-06
EMT: Emergency Management Technology –
Chinese – Hungarian Bilateral project –
2005-06
SINWANA: Safety Aspects of Inland Waterway
Navigation Especially in Shallow Waters –
Chinese – Hungarian Bilateral project –
2005-06
EPATS: European Personal Air Transportation
System (EU FP6 ), 2007-08
SINBAD: Safety Improved with a New concept
by Better Awareness on airport approach
Domain (EU FP6 project), 2007-10
32
NELI: Cooperation-Network for logistics
and nautical education focusing on Inland
Waterway Transport in the Danube corridor
supported by innovative solutions, EU – SEE
project, 2009-11
SATS-Rdmp: Small Aircraft Transportation
System Roadmap (EU FP7), 2010-12
A2-Net-Team: Advanced Aircraft Network for
Theoretical & Experimental Aeroservoelastic
Modeling, FP7-IRSES Project , 2011-14
ESPOSA: Efficient Systems and Propulsion for
Small Aircraft (EU FP7), 2011-14
Move It!: Modernisation of Vessels for Inland
waterway freight Transport (EU FP7), 2011-14
INNOVATIVE: Associate Partner of the
SESAR JU, Lot 5: Modeling, support, validation,
2011-14
ATM: FUSION Lot 6 Integration of UAV into the
SESAR, 2011-14
General information
The Budapest University of Technology and
Economics is a 232 years old technical
university
The department works and has good results in
the field of thermal and fluid micro machines
vehicle thermal process analysis, gas turbine
The Department of Aeronautics, Naval
Architect and Railway Vehicles works for
Faculty of Transportation Engineering and
Vehicle Engineering and has full BSc., MSc.
and PhD. programs.
and combustion engine, aeronautical
sciences development and real flight situation
modeling, studies on special airplanes and air
transportation management
The Department has 6 laboratories (among as
fluid and thermal machines, virtual laboratory,
flight simulator) and workshop.
The Department has competence and capacity
in technology and product development,
evaluation, simulation, model-formation and
outside engineering support.
33
eCon Engineering Ltd.
Address: 2051 Biatorbágy, Ritsmann u. 42.
Telephone: +36 1 279 0320
Website:www.econengineering.com
Managing Director: Gábor Kiglics
Contact: Gábor Kiglics
Languages: Hungarian, German, English
Engineering consulting for FE - numerical
computations
List of products:
Finite element analysis, engineering consulting,
eCon Engineering Ltd. offers its expertise for
the following development areas:
- Structural analysis (linear and non-linear)
- Thermal analysis
- Electromagnetic analysis
- Coupled field analyses (thermal–solidity,
electromagnetic–thermal, hydrodynamic–
solidity)
34
- Transient analyses
- Dynamic analyses
- Optimization
- Crash simulations
- Analysis and manufacturing planning of
composite structures
- Acoustic analyses
- Lifetime calculations
- Composite analyses and optimization
Contact:
[email protected]
We offer engineering and design services in
the following areas - eCon Engineering are a
main conductor
List of products:
- Special pourpose machines
- Assembly robots
- Weld-glue-seal machines
- Gauges, testers and fatiguing machines
- Product development
Contact:
[email protected]
General information
Founded in 2002
3 Hungarian owners
45 Employees – 90% Engineers
OFFICES:
Budapest – Hungary (Headquarters)
Győr – Hungary
Munich, Stuttgart – Germany
Subotica – Serbia
ENGINEERING SERVICES:
FEA – Finite Element Analysis
Dynamic Analyses
Optimization
Design of special purpose machinery, Robot
cells, Pick&Place Automats
Support, Training
35
Rea-Tech Mérnöki és Építészeti Ltd.
SOFTWARE DISTRIBUTION:
ANSYS
MOLDEX3D
HyperWorks
Distribution of Deprag components in Hungary
GOAL FOR CAD APPLICATIONS:
Collaborative engineering together with our
partners
Complex solutions
Global focus with diverse experience
STRATEGY:
CAD Simulation und CAD Design bundled
Complex project Management
Certification: AS9100 / ISO9001
SOFTWARE-PORTFOLIO:
HyperWorks, ANSA, MEDINA
ANSYS, NASTRAN, ABAQUS
ACP (Ansys Composites Pre/Post)
36
AMESIM - systemsimulation
LS-DYNA, PAM-Crash
Moldex3D
FEMFAT, nCode
ADAMS, Simpack
CFX, Fluent
Catia V5, SolidWorks
Address: 2049 Diósd, IV. Béla király út 44.
Telephone: +36 20 330 9499
Website: www.rea-tech.eu
COOPERATION:
Cooperation in Development projects
Close cooperation with Technical University
Budapest
Working closely with our Partners
Long-time experience in CAD computations
Experience in CAD-usages
Connection to multiple CAD-Systems
Innovative Concepts & Scenarios
AS9100 rev B
Managing Director: Jozsef Rohacs, Dr.
Contact: +36 30 581 9373
Languages: Hungarian, English, Russian
List of products:
Rea-Tech has practice in development of the
concepts of operation, prediction and demand
models, radically new, so called disruptive
technologies, new products, technology
identification, evaluation and selection,
technology and product life evaluation,
forecast, foresight and roadmapping.
It has developed demand model of the
personal planes, predicted the number of UAV,
developed the safety philosophy for small and
personal aircraft, air transportation systems,
has involved into the identification, evaluation
and selection of the magnetic levitation
technology to assisting the aircraft take-off and
landing, etc.
The staff of Rea-Tech had been taken part as
advisors in development of the Corvus Racer
540 acrobatic aircraft.
Rea-Tech is the coordinator of the EU
supported GABRIEL (Integrated Ground and
on-Board system for Support of the Aircraft
Safe Take-off and Landing – Grant Agreement
Number - 284884).
The Rea-tech has developed a special accident
investigation support system.
Contact:
[email protected]
37
System delevopment.
List of products:
Rea-Tech has taken part in development
of different systems like, conflict detection
and resolutions, MEMS based sensors and
actuators. These activities were supported
by different national research programs,
and Hungarian companies. as well as by
EU supported GANRIEL project and they
are associated with system development as
“Operator centric integrated monitoring system
for machines and vehicles”, and “ Embedded
Flight Instrument System”. These two last
systems are licensed by inventors of Rea-Tech
working for Budapest University of Technology
and Economics, too.
List of products:
Rea-Tech had been developed a special airport
concept with ground service production line,
airport security manuals for small airports
(as contribution to EU supported PPlane
(PPlane—Personal Plane: Assessment and
Validation of Pioneering Concepts for Personal
Air Transport Systems)) airport site plane and
preliminary design for using the GABRIEL
concept
Contact:
[email protected]
General information
Rea-Tech Ltd. is a privately owned Hungarian
company established for research development - innovation and outside
engineering and project management support
in (air) transportation and vehicle engineering,
and aeronautics.
The company’s mission is to contribute to
national and international projects for the
improvement of air transport systems. Rea-Tech
continues to actively participate in a variety
of EC projects under different Framework
Programmes and collaborates with a number
of research institutions, organizations, private
companies and universities.
Rea-Tech has competence and capacity in
outside support providing in
- Education and training,
- Outside engineering (especially in CFD,
CAD/CAM, model development, design and
simulation, system integration),
- Technology and product development,
technology and product evaluation, testing,
certification,
- Technology forecast, technology and product
life prediction, roadmapping,
- Project management, development of the
international cooperation,
- External expert, consultancy, advisory.
Contact:
[email protected]
38
39
Sky-Soft Ltd.
Address: 1125 Budapest, Városkúti út 30/A
Telephone: +36 1 392 2275
Website:www.sky-soft.hu
Managing Director: János Sziklai, Dr.
Contact: János Sziklai, Dr.
Software development Software consulting
Hardware consulting System integration
Scientific and engineering research
experimental developments Rejuvenation of
legacy VAX computer based systems with
CHARON-VAX software emulator Development
of “Mission-critical” high reliability systems for
military applications.
List of products:
Software development Software consulting
Hardware consulting System integration
Scientific and engineering research
experimental developments Rejuvenation of
legacy VAX computer based systems with
CHARON-VAX software emulator Development
of “Mission-critical” high reliability systems for
military applications.
Contact:
[email protected]
40
Research and development for military
applications, military engineering and defense
technology
List of products: Research and development
for military applications, military engineering
and defense technology.
MSZ EN ISO 9001:2009 / HTI/67-75/2012.
AQAP 2110:2009+2210 / HTI/67-76/2012.
“Registered NATO Supplier” qualification 2002.
“Approved NATO Supplier” qualification 2004.
“Suitable Supplier for NATO Tenders”
qualification 2012.
Contact:
[email protected]
41
Various
Ostorhazi Ltd.
Address: 2030 Érd, Duna u. 27/c
Telephone: +36 23 521 100
Website:www.coatingtechnology.eu
Managing Director: László Ostorházi, Dr.
Contact: László Ostorházi, Dr.
Different coatings, paintings & linings
List of products:
Special screw coating for aerospace industry
Contact:
[email protected]
General information
2300 m2 new Coating Techniques Centre in
the industrial park at Százhalombatta. The
complex, operate advanced equipment, surface
preparation and finishing techniques of the
industrial coating technology. Our aim is to
offer complex solutions to all surface treatment
problems for our customers, while ensuring a
significant manufacturing capacity.
We manufacture high quality coatings that
prevent or reduce the adverse effect of the
environment on the carrying surface. Such
tasks include particularly corrosion protection
or other coatings of special functions. In our
facilities and on the workplaces we cooperate
with skilled personnel and carefully selected
suppliers for our customers who are committed
in quality.
In addition to our services we offer industrial
painting equipment and the materials
necessary for their application. We develop
and apply special solutions for coating
technologies, that increase the lifetime and
utility value of the built environment, while
reduce energy consumption and operational
costs.
ISO 9000, ISO 14000
42
Various
43
Produktum Ltd.
Address: 1182 Budapest, Olt u. 12.
Telephone: +36 1 291 0460
Website:www.produktum.hu
Managing Director: Ferenc Szarvas
Contact: Ferenc Szarvas
Languages: English
Design and production of special tools/ground
support equipment/aviation access equipment
for airlines and airplane maintenance industry.
Aluminium structures for general industry.
Products for aviation:
- Mobile aluminium access stands, filling
stands for maintenance/aviation companies
- Towable/movable hydraulically operated
access equipment for A320/B737
maintenance
- Towable aluminium flip up step stands
44
Various
- Gas path cleaner for CFM 56 and V2500
engines
- Lower nose dock for A320
- Baggage carts
- Kitchen mover
- Running gear dollies, etc.
- Design of special custom tailored tools for
airplane maintenance
References:
Lufthansa Technik plants,
Aeroplex, Bombardier Transportation, MALÉV,
Budapest Airport, Austrian AG, GANZ-Skoda,
Montenegro Airlines, Trade Air, Alstom Power,
ArcelorMittal, WOCO, Celebi GH, airports,
railway industry, power stations
Our products can be found: in Hungary,
Austria, Croatia, Montenegro, Romania,
Serbia, Switzerland, Bulgaria, Albania, Czech
Contact:
[email protected]
- Design
- Profile and sheet metal cutting
- Sheet metal pressed bending
- Punching and forming with crank presses
- Welding (TIG, MIG, MMA) carbon steel,
stainless steel, aluminium
- Plasma cutting
- Turning
- Milling
TÜV certified products. Access stands for
aviation according to EURONORM, approved
by TÜV. ISO certification is under progress
45
VARINEX Inc.
Address: 1141 Budapest, Kőszeg u. 4.
Telephone: +36 1 273 3400
Website:www.varinex.hu
Managing Director: György Voloncs
Contact: György Falk
Establishment: 1991
We directly produce 3D printed parts with
Stratasys FDM technology by FORTUS400
machine with ULTHEM material as well and we
also do Objet/PolyJet and Objet/Multimaterial
parts and EOS SLS/PA models too.
We make wax pressing tools for investment
casting, we also print temporary injection tools
and complete casting patterns including core
boxes as well.
Contact:
[email protected]
We offer Engineering Simulation services in the
following analysis areas:
- Structural (linear and non-linear)
- Thermal
- Dynamic / Multibody
- CFD
- Forming / Forging
- Welding
- Plastic Injection
We also offer Implementation, Training and
Support for Simulation Tools.
Contact:
[email protected]
46
Various
CAD/CAM/FEA services, Rapid Prototyping
and Rapid Tooling, Reverse Engineering
ISO 9001:2008 since 1998
Software Distribution:
- Autodesk
- MSC Software
- Simufact
- Next Limit Technologies
- Open Mind
- Rapidform
47
Part manufacturing
ANTON Ltd.
Address: 8900 Zalaegerszeg, Sport u 16.
Telephone: +36 92 550 010
Website:www.anton.hu
Managing Director: Antal Bóbics
Contact: István Gál
Tooling
Injection moulding
List of products:
- Injection moulds
- Machining fixtures
List of products:
Plastic parts
Design Engineering, Milling, Grinding, EDM
(wire and die sinking), Fast Hole EDM, Hot
Forging, EB Welding, Prototyping, Injection
moulding, Coordinate Measuring.
Contacts:
[email protected]
General information
Manufacturing of injection moulds and
thermoplastic parts (1-4 component).
EDM and CNC machining of hard-to-machine
metal alloys.
Parts for gas turbines (complete machining),
toolsets for machining the above components.
ISO 9001 from 2001
ISO 14001 from 2004
ISO-TS 16949 from 2005
AS 9100 from 2009
Contacts:
[email protected]
Machining
List of products:
Metal part manufacturing/ machining
Contacts:
[email protected]
48
Part manufacturing
49
Borsodi Műhely Ltd.
Address: 9027 Győr, Juharfa u. 8.
Telephone: +36 96 529 071
Website:www.borsodimuhely.hu
Managing Director: László Borsodi
Contact: Adrián Natea
Languages: Hungarian, English, German,
Spanish, French, Italian, Romanian
Individual and small serial, high precision parts
machining
List of products:
- Universal turning, milling, boring, grinding
- CNC turning (8axis), CNC milling (3&5axis),
CNC coordiante boring
- CNC flat grinding, CNC diameter grinding,
CNC coordiante grinding
- EDM: Die-sinking, Wire-Erodating, Start-bore
drilling
- Fine locksmith works, Assembling
Heat treatment
List of products:
- Vacuum hardening, oil hardening, case
hardening
- Tempering, Annealing, Softening, Stress
relieving, Aging
- Gas nitriding
- Precipitation hardening
Contact:
[email protected]
Part manufacturing
List of products:
- 3D CMM measuring (Power Inspector)
- 2D highness measuring
- Hady measuring (Micrometer, Vernier caliper,
Gauges, etc...)
- Optical projector
- Optical microscope
- Contourographe
- Accredited length measuring (ISO17025)
Contact:
[email protected]
- Machining
- CAD/CAM (Solidworks / PowerMill)
- Measuring
- Accredited length measuring
- Engineer support
General information
- Machining: 3 shifts
- Heat treatment: Continuous shift
- Measuring: 2 shifts
- 3 machining factories
AS 9100, ISO 9001, ISO 14001, ISO 17025
Contact:
[email protected]
50
Measuring
51
Cooptim Ipari Ltd.
Address: 2030 Érd, Budafoki út 10.
Telephone: +36 23 521 400
Website:www.cooptim.com
Managing Director: Lajos Kerekes, Antal Natta
Contact: Eva Solyom
Languages: German, English, Russian
Producing wire feed systems and other spare
parts for GMAW (Gas shielded Metal Arc
Welding) machines. Products are in-house
developments some of them patented.
Cooptim has achieved a dominating position
on the international welding technology
market. Almost the entire production is
exported to 45 countries worldwide.
4300 m2 production plant is equipped with
CNC machines.
52
Part manufacturing
Machined parts for vehicles, aircraft, and
aerospace industry
Cutting parts for any special needs
List of products:
Aluminium and plastic wire feed systems, reel
hub assemblies, central adaptors, feed rolls,
gear wheels, collet knobs, gas preheaters etc.
Machined parts, cutting parts, castings, geared
parts.
Contact:
[email protected]
List of products:
Machining, cutting, wire harnesses
Contact:
[email protected]
General information
Employees in the manufacturing are cutting
skilled labourers, qualified NC/CNC machine
operators.
Direct control of manufacturing, developing
and planning made by graduated proessional
employees.
With starting a second shift the capacity could
be increased by 5500 working houres per
month.
- CNC turning, CNC cutting, CNC milling and
drilling, grinding and gearing
- CNC machining centers assembly
ISO9001:2008 and AS9100
53
Elektro-Metall Paks Ltd.
Address: 7030 Paks, Ipari Park Hrsz.:4703/31
Telephone: +36 75 519 111
Website:www.eme-in.de
Managing Director: Károly Vincze
Contact: Károly Vincze
Languages: German
Cable confection, making harnesses
List of products:
Cable harnesses
- Wireless laser subtitling
- Harness assembly
- High-voltage testing
Contact:
[email protected]
54
Part manufacturing
General information
- 200 employees, two-shift work schedule
- Production, quality, logistics and corporate
management
EN 9100-2009
EN 9001-2008
ISO 14001:2005
55
Eltec Holding Ltd.
Address: 1106 Budapest, Tündérfürt u. 3-5.
Telephone: +36 1 335 8330
Website:www.eltec.net
Managing Director: Csaba Domolki
Contact: Istvan Domeny
Languages: English, German, Polish, Hungarian
Area of Production
- wire harnesses, Magnetic coils, electrical
components
- complete cable systems for the automotive
and bus industries
- single and special vehicles and electric cars
- customized cable sets for highest standards
- conveyor and control systems and heavy
power transfer
- aeronautics, railway and armament industries
R&D
- complex technical developments
- modern future oriented developments
- high-complexity electrical engineering
systems with 3D printing, rapid prototyping
56
Part manufacturing
Mechanical and electrical component
assemblies, plastic molding, Resin casting
technology, winding technology, rapid
prototyping, electrical engineering systems.
EN9100:2009
IRIS
ISO/TS16949:2009
ISO9001:2008
ISO14001:2004
UL Reg. E337198 and E337199
57
Gravitás 2000 Ltd.
Address: 1139 Budapest, Lomb u. 31/C.
Telephone: +36 1 350 8851
Website:www.gravitas.hu
Managing Director: Lajos Hajagos
Contact: Sándor Markos
Languages: English
Precision parts and sub-assemblies for
medical, automobile and aerospace industry
List of products:
- parts for M55 bike
- parts for medical equipments
(agility, leaf-bank, phantom head)
- parts for aerospace equipments
Tool and tool insert machining
List of products:
- injection mold tools
- mold tool inserts
Contact:
[email protected]
Contact:
[email protected]
Special machinery design
and manufacturing
58
Part manufacturing
List of products:
- special fixtures
- special machinery
- conveyors
- assembly lines
Contact:
[email protected]
- CAD/CAM application
- Multi-axis machining
- Mil-turn, turn-mill machining
- Wire EDMing
- EDM drilling
- Micro milling
- Exotic material machining
- Assembling
General information
The Gravitás 2000 Ltd. is a 100% Hungarian
owned limited company, which is working
on the field of the machine element and tool
production. The business strategies of the
company are the high quality in the design and
manufacturing and the precise fulfilment in the
delivery. The highly educated and experienced
engineers and skilled workers guarantee the
perfect realizations of the manufacturing
tasks. The CAD/CAM systems, installed in our
engineering office and the PPS system are
in close connection and ensure the precise
realization of the projects. The complicated
manufacturing tasks are
supported by the computer aided part design,
multi-axis machining, HSC and hard milling,
high precision CNC turning, spark erosion and
grinding. The production process is controlled
by a computer system, and supported by
ISO 9001:2008, ISO 14001: 2005, ISO
13485:2003 and the AS9100 Revision B
integrated quality assurance systems. The
manufacturing environment is developing
continuously, new procedures, more efficient
tooling and machining equipment, and upto-date CNC machine tools help the business
success of the company.
59
Macher Engineering and
Electronic Ltd.
Address: 8000 Székesfehérvár, Sóstói út 1.
Telephone: +36 22 507 450
Website:www.macher.hu
Managing Director: Marta Macher
Contact: Andrea Malomhelyi
[email protected]
Languages: English, German, Hungarian
Electronic development and manufacturing
activities of the company:
Electro-mechanical development, electromechanical assembly, cable confectioning,
manufacturing tools and special purpose
equipment, developing production
technologies, injection moulding,
metallization.
Customers receive full-scale service in
the following areas: development based
on customer expectations, preparing
production documentations, providing special
manufacturing tools, sample production, series
production.
Products undergo final inspection in a
simulated environment, which ensures that the
specified technical system of requirements is
fully met.
Products will reach the end-user directly or
with the contribution of an integrator.
- ISO 9001:2008
- EN 9100:2009
- ISO 14001:2004
- UL Cert. E341577
Contact:
[email protected]
60
Part manufacturing
61
MAGYARMET Investment
Casting Lp.
Address: 2060 Bicske, Kanizsai u. 12.
Telephone: +36 22 566 310
Website:www.magyarmet.com
Managing Director: Imre Győri
Contact: Iliya Tzankov
Languages: English, German, Russian
Precision investment castings (lost wax
process), casted in low- and high-alloy steel
(corrosion-, heat- and wear-resistant), nickeland cobalt-based alloys, weight from 5 g to 40
kg. The production process includes the heat
treatment of the castings. Application areas:
pumps and valves, instrumentation; various
engineering sectors - general, power, chemical,
vehicle, medical; processing industries (food,
pulp and paper, separation) etc.
Export ratio is about 60 %.
62
Part manufacturing
Most of the casted parts are machined on
modern CNC machines in the company’s
machining shop. Further services are
consultations on castable designs and alloys,
rapid prototyping, surface and heat treatment
etc.
List of products:
Products are in general designed by the client,
are produced acc. client’s drawings.
Some examples: pump impellers and bodies,
sensor parts, bodies, bonnets and discs for
valves and instrumentation; exhaust knees
for big engines, brake parts for railway
applications; catalyst grids, reducers and
burners for petrolchemistry; separators for
centrifuges; cable clamps for wind farms;
frames and bodies for medical equipment and
many more.
List of products:
Products are in general designed by the
client, are produced acc. client’s drawings.
Some examples for ready machined parts:
pump impellers and bodies, sensor parts,
bodies, bonnets and discs for valves and
instrumentation; exhaust knees for big
engines, brake parts for railway applications;
catalyst grids, reducers and burners for
petrochemical applications; separators for
centrifuges; cable clamps for wind farms;
frames and bodies for medical equipment and
many more.
Contact: [email protected]
Production capabilities:
Precision investment casting, heat treatment,
CNC mechanical machining (turning,
milling, boring, key seating), conventional
machining (turning, milling, boring, grinding,
key seating), solidification and machining
simulation, rapid prototyping (partly with
subcontractors), planning of the wax injection
tools, production of the wax injection tools
(with subcontractors).
63
General information
MAGYARMET looks back at more than 30
years of experience on the field of precision
investment casting and provides a big
variety of alloys - carbon and low-alloy
steel (structural, case hardening and heat
treatable), high-alloy steels (austenitic,
martensitic, ferritic, duplex and super duplex,
heat-resistant and heat-proof), special alloys.
The annual capacity is about 300 t. Typically
there are small and medium sized series, but
in the last few years the proportion of big
series is increasing. Most of the products are
mechanically machined, some are surface
treated.
ISO 9001:2008 since 26.05.2009 (SGS)
AS 9100, Rev. C since 26.05.2009 (SGS)
ISO 14001 since 27.01.2010 (SGS)
PED 97/23/EC since 09.06.2011 (TÜV Rheinland)
ISO 3834-2:2006 (TÜV Süd)
64
Part manufacturing
Omikron-Dokk Ltd.
Address: 8227 Felsőörs, Petőfi u. 26.
Telephone: +36 30 747 6055
Website: www.omikrondokk.hu
Managing Director: István Lipóczi
Contact: Gergely Lipóczi, Dr.
Glassfiber and carbonfiber reinforced parts
made with the following technologies:
- Wet lay-up GRP, CRP
- Spray-up
- RTM / light RTM
- Vacuum infusion
- Continuous lamination
- Max. yearly capacity: 2000 tons
List of products:
- Bus and truck body parts
- Double-decker bus staircases
- Wind turbine rotor blades up until
20 meters radius
- Swimming pools and garden ponds
- Motorboats, yachts
- Fuselages
- Interior panels
- Dashboards
- Wings
Contact:
[email protected]
65
- SMC prepregs, high and low temperature
epoxy and ester based systems
- BMC systems
- Press moulding
- 2100 tons yearly max. capacity
Thermoforming / Vacuforming thermoplastic
materials
1,5 x 1 m maximum part size, 10 mm
max. part thickness
List of products:
Passenger car and bus panels, covers for
Suzuki, Daewoo and Scania
List of products:
- Generator disks
- Welding masks
- Railway insulations
- Lamp armatures
Contact:
[email protected]
Contact:
[email protected]
- Wet lay-up GRP, CRP
- Spray-up
- RTM / light RTM
- Vacuum infusion
- Continuous lamination
- Thermoforming / Vacuforming
66
Part manufacturing
- Structural adhesives
- Painting
- CAD/CAM/CAE
- Rapid prototyping
- Prototyping, Moulding, Tooling
- CNC milling
- 3D measuring
- FEA simulations
General information
Omikron-Dokk Group is one of the largest
Central-European GRP and CRP part
manufacturers, with 4 workshops, 8000 m2
production area and 80 employees.
AS9100, Certified by SGS, 2013
ISO 14001
ISO 9001
67
Technoplast Group Ltd.
Address: 3561 Felsőzsolca, Bódva u. 7.
Telephone: +36 20 9333 563
Website:www.technoplast.hu
Managing Director: Peter Zai
Contact: Peter Zai
Languages: English
Establishment: 2011(1980)
Rapid prototyping
Tooling, jig making
Machine building
List of products:
3D printing, vacuum casting, RIM casting,
plastic and rubber part production, complete
unit production (e.g. air-condition system)
List of products:
Tools for plastic injection moulding, rubber
vulcanization, forging.
List of products:
Complete machine production
(e.g. medical Kidney stones crushers)
Contact:
[email protected]
Contact:
[email protected]
Contact:
[email protected]
68
Part manufacturing
General information
Our company produced few CNC machined
parts for Sentinel 2 satellite. We produced
some parts for an equipment for Focus
ESA project. The equipment was tested on
07.02.2010. in the ISS space
station by Mr Jeffrey Williams.
Designing, CAD/CAM engineering, rapid
prototyping, plastic moulding, CNC machining,
machine building.
ISO 9001:2009
69
TKI-Ferrit Development and
Manufacturing Ltd.
Address: 1142 Budapest, Ungvar u. 64-6.
Telephone: + 36 1 422 0030
Website:www.tki-ferrit.hu
Managing Director: Anna Sztaniszlav, Dr.
Contact: Daniel Sztaniszlav, Dr.
Languages: English, Hungarian
Passive microwave components
List of products:
Waveguide-, micro strip-, strips line-, lumped
elements isolators, circulators from 70 MHz to
40 GHz frequency range applications with low,
medium-, and high-power handling.
Operating temperature range is according to
requests.
Contact:
[email protected]
Components with different connectors - pin,
SMA, N, BNC- are available.
70
Part manufacturing
General information
Traditional ceramic technology: ball mills, high
temperature furnaces up to 1450 deg.C for
microwave ferrite/garnet materials’ production.
Grinding, lapping, polishing technologies for
elaboration of different ferrite/garnet and
ceramic dielectric pieces. Thin film technology:
RF sputtering, electroless galvanic method,
photolithography. Assembling microwave
components. Microwave measurements of
transmission parameters, such as insertion loss,
isolation and reflection on a broad temperature
range.
TKI-Ferrite Ltd has long experiences on
microwave ferrite/garnet materials and ferrite
devices. The company has self-developed and
manufactured ferrites/garnets, circulators,
isolators. The products are both catalogue
products and developed according to
customers’ requests. According to our R&D
capacities we are reliable SME partner for
different international and EU projects, grants,
such as EUREKA, ERA-NET, Fp7, Horizont
2000, etc.
ISO -9001-2009; AS 9100 Rev.C
71
System development
Aviatronic Ltd.
Address: 1121 Budapest, Konkoly-Thege Miklos
út 29-33.
Telephone: +36 1 392 0784
Website:www.aviatronic.hu
Managing Director: Peter Barna
Contact: Peter Barna
Languages: English
Electronic hardware and software
development, production, maintenance and
repair
repair
List of products:
Flight data recorders and evaluation systems
List of products:
Airborne power supplies
Contact:
[email protected]
Contact:
[email protected]
repair
List of products:
- Magnetic sensors
- Non-destructive testing
Contact:
[email protected]
- Design and manufacturing of airborne
electronic systems
- BGA assembly and rework capabilities
General information
- Design and manufacturing of airborne
electronic systems
- BGA assembly and rework capabilities
AS9100 (20010-2012)
ISO 9001:2008
72
System development
73
BHE Bonn Hungary Ltd.
Address: 1044 Budapest, Ipari Park u. 10.
Telephone: +36 1 233 2138
Website:www.bhe-mw.eu
Managing Director: Károly Kazi, Dr.
Contact: János Solymosi
Languages: English
- On-board and ground based electronics
- Radar technology
- Space Telecommunications
- Satellite Technology
- UAS technology
List of products:
- Telemetry & Telecommand equipment
- Synthetic Aperture Radar subsystems
- Microwave Altimeters
- UAS Systems
- Digital Satellite Communication Subsystems
- On-board Electronic Surveillance
Contact:
[email protected]
General information
- CAE engineering, Simulation, Product
development
Simulation, optimisation, development,
assembling, integration and testing of RF and
microwave subsystems and equipment for the
aeronautics, defence and space industry.
Airborne, space-borne and ground based
RF & microwave subsystems for remote
sensing and communications.
ISO9001 (since 2000)
AS9100 (since 2009)
74
System development
75
All these automations are carried out by
model transformations that provide a general
platform to capture the various engineering
design intelligence.
Our department has over a decade of
experience in the application of MDE based
approaches for the design and development of
safety critical system.
Fault Tolerant Systems
Research Group
Address: 1117 Magyar Tudosok krt 2
Telephone: +36 1 463 3586
Website:www.inf.mit.bme.hu
Managing Director: Prof. András Pataricza
Contact: Ákos Horváth
Advanced Software technologies
- Model-based design and analysis
- Verification and Validation using formal
methods
- Traceability for certification
- Safety analysis
The increasing complexity of the safety
critical system applications demands for
the widespread use of design automation
in order to continuously improve design
76
System development
productivity and quality. Model-Driven
Engineering (MDE) has recently become a
key technique in systems engineering by
facilitating the systematic use of models from
an early phase of the design cycle. System
requirements and design are captured by
high-level, engineering models. Early formal
analysis of design models is carried out by
automatically generating various mathematical
models to eliminate conceptual flaws and
finally, design artefacts of the target system
such as source code, configuration tables or
documentation are derived by code generators.
List of products:
A complete round-trip engineering
between design and verification is enabled
by precise model transformations from
engineering models to V&V techniques and
back-annotation of analysis results to the
engineering model. The main benefit of early
model analysis is the significant cost reduction
achieved by thorough checks in each design
phase in contrast to the traditional process
where early design faults are captured during
final testing.
Automated model-based traceability
assurance extracts traceability documentation
as required by certification authorities (like
DO-178B/C in the avionics domain), where
rich traceability information is derived during
model transformation steps processing the
source and target models and incrementally
maintained upon model changes. Testing,
the most commonly used V&V technique can
also benefit from MDE by partially automating
the generation and evaluation of test cases.
Our focus is testing robustness, a frequently
overlooked property, which measures the
resilience against exceptional inputs and
stressful environmental conditions.
Runtime verification carried out by monitoring
can proactively detect errors and initiate
corrective actions. Monitoring of embedded
systems is particularly challenging due to the
severe resource-constraints of the target.
Our method supports the synthesis of
monitors based on the (formalized) properties
to be verified and adjusts the resolution of
monitoring to the amount of free resources.
Contacts:
[email protected]
General information
As a research group we aim to provide professional services for our partners that ranges from
consultation, education to direct product development and technology/knowledge transfer in the
domains described in the Area of Production.
77
Hilase Ltd.
Address: 6727 Szeged, Irinyi u. 1.
Telephone: +36 62 700 910
Website: www.hilase.eu
Managing Director: Zoltán Bozóki
Contact: Zoltán Bozóki
Languages: English
Establishment: SME
Instrumentation for airborne measurements
List of products:
Hilase-Hygro. Measures atmospheric humidity
and total water concentration airborne for
meteorological and scientific as well as for
safety purposes.
Contact:
[email protected]
78
System development
General information
Concentration measuring instrumentation
for various applications including airborne
measurements.
Operation of the Hilase analysers are based on
the so called laser based photoacoustic effect.
The advantage of this method is its simplicity,
ruggedness, sensitivity and fast response time.
Hilase analysers has fully automatic operation,
light-weight and requires yearly or even more
rare re-calibration.
Hilase is specialised in developing, prototyping
and producing instruments for measuring the
concentration of gases or aerosols in various
applications. Hilase already sold airborne
instruments for research aircrafts. Furthermore
Hilase successfully completed commercialising
an instrument family (Hilase-Ex) for the natural
gas industry.
Hilase works in close cooperation with the
University of Szeged and the Videoton Holding
Inc. The University of Szeged ensures the
scientific background of the activities of Hilase,
while Videoton Holding Inc. provides the
engineering support for the company.
ISO 9100:2008 since 2007
AS9100 since 2010
79
HM Arzenál
Elektromechanikai Inc.
Address: 4461 Nyírtelek, Dózsa György út 121.
Pf.10
Telephone: +36 42 210 555
Website: www.hmarzenal.hu
Managing Director: Gábor Varga
Languages: H
ungarian, English, German,
Russian
Military industry / radar modernization
Civil manufacturing
List of products:
- Design and manufacturing of high frequency
units
- Design and manufacturing of signal
processing units
- Assembled cables
- Manufacturing of parts, units and sub-units
List of products:
- Manufacturing of parts, units and sub-units
- Metal working with CNC and other
technologies
- Design and installation of security systems
Design, different kinds of metalworking
technologies, CNC technology
Contact:
[email protected]
Contact:
[email protected]
80
System development
ISO 9001: 2009
ISO 14001: 2004
ISO/IEC 27001: 2005
AQAP 2110:2006
81
SGF Technology Associates Ltd.
Address: 1121 Budapest, Pipiske u. 1-5/20
Telephone: +36 20 344 2537
Website: www.sgf.hu
Managing Director: Sándor Szalai, Dr.
Contact: Sándor Szalai, Dr.
Languages: E nglish, Russian, Hungarian
Space related high reliable fault tolerant
control and data acquisition systems
Control and Data Acquisition System for
airplanes
List of products:
- Fault tolerant central Command and Data
Management System (CDMS hardware and
software) for the Rosetta Philae lander
- Lander Software Simulator (for DLR and MPS
- Electrical Ground Support Equipment of the
CONCERT, OMEGA and SPICAM instruments
for Rosetta
- CDMS simulators for Philae lander
List of products:
Data Acquisition Block and Archiving System
for aeroplanes (Racer 540)
Contact:
[email protected]
Contact:
[email protected]
82
System development
83
BHE Bonn Hungary
Electronics Ltd.
X
X
X
X
X
X
X
X
X
X
CAD-Terv Ltd.
X
CAE Engineering Ltd.
X
X
X
X
X
X
X
X
X
X
Mould
manufacturing
AS 9100
UAS
Technology
X
Hungaro-Copter Ltd.
X
X
Flight
simulators
AS 9100
Magnus Aircraft Ltd.
X
AS 9100
Magyarmet Lp.
X
OmikronDokk Ltd.
X
X
X
EMP ElektroMetallPaks Ltd.
X
X
Fault Tolerant
Systems Research
Group Ltd.
X
X
X
X
X
X
X
X
X
X
X
X
X
X
Halley Ltd.
AS 9100
AS 9100
Sky Soft Ltd.
X
AS 9100
SkyCruiser
Autogyro Ltd.
X
Varinex Inc.
AS 9100
Special
measuring
instruments
AS 9100
X
X
X
X
X
X
X
X
X
X
Lost-wax
casting
X
X
X
AS 9100
X
X
Special
coatings/linings
X
X
AS 9100
X
X
X
X
X
X
X
X
X
ISO 9001:2009
AS 9100
X
X
Certificates
Other
Composites
Aircraft manufacturing
Space - Aerospace Subsystems/ Components
Auxiliary Systems/ Tooling
Airports/ Airport Infrastructure
Manufacturing of precision parts
Avionics/ Simulators/ Control Systems
ICT
Production/Processing/Assembly
Wire harnesses
Laser Technology
Interiors
X
X
Technoplast
Group Ltd.
X
X
X
X
X
X
X
X
SGF Ltd.
TKI-Ferrit Ltd.
X
X
X
Ostorházi Ltd.
X
X
X
X
Rea-Tech Ltd.
Eltec Holding Ltd.
X
X
X
Produktum Ltd.
Maintenance/Repair/Overhaul
Onboard instruments
Satellite Communication
Assembling/Integration
Consultancy/People Management
Education/Training
R&D/Engineering/Testing
Prototyping / Rapid prototyping
X
Macher Ltd.
X
X
HM Arzenál Inc.
ISO
9001:2009
ISO
14001:2004
ISO/IEC
27001:2005
AQAP
2110:2006
AS 9100
AS 9100
X
X
Raw materials / Special Materials
Certificates
Other
AS 9100
X
X
X
X
Composites
X
X
Cooptim Ltd.
Department of
Aeronautics, Naval
Architecture and
Railway Vehicles,
Budapest University
of Technology and
Economics
Aircraft manufacturing
Space - Aerospace Subsystems/ Components
Auxiliary Systems/ Tooling
Airports/ Airport Infrastructure
Manufacturing of precision parts
Avionics/ Simulators/ Control Systems
Interiors
ICT
X
X
X
BorsodiMűhely Ltd.
Hilase Ltd.
Production/Processing/Assembly
Wire harnesses
Laser Technology
Maintenance/Repair/Overhaul
Onboard instruments
X
X
Aviatronic Ltd.
Gravitás 2000 Ltd.
Satellite Communication
X
Avana Industries Ltd.
Fly-Mix Ltd.
Assembling/Integration
Consultancy/People Management
Education/Training
X
R&D/Engineering/Testing
Prototyping / Rapid prototyping
Raw materials / Special Materials
Anton Ltd.
X
X
X
X
X
X
X
X
Rapid prototyping
AS 9100
AS 9100
ISO 9001:2008
Contacts
Mr. András Wittek
Mr. Mihaly Hideg MBA, MSc.
Head of Directorate
consultant for machinery/aerospace
industries
+36 1 872 6666
[email protected]
Chairman of the Hungarian Aviation
Industry Foundation
Cluster Manager of the
Hungarian Aerospace Cluster
Hungarian Aviation Industry
Foundation
Mr. Roland Guraly
Hungarian representative at ACARE
AirTN technical participant (NIH)
Business Development Director
Slot Consulting Ltd.
Hungary - 1185 Budapest, Jeges u. 9.
+36 1 294-1351
[email protected]
www.haif.org
Hungary - 1183 Budapest,
Csáth Géza u. 1/D. 1.sc. V/3.
+ 36 1 290-3498
[email protected]
www.slotconsulting.hu
Dr. Jozsef Rohacs Ph.D.
EASN contact for Hungary
Head of Department
Department of Aeronautics,
Naval Architect and Railway Vehicles
Budapest University of Technology
and Economics
Hungary - 1111 Budapest,
Stoczek u. 6.
Building J. 4th floor
+36 1463-1922
[email protected]
www.bme.hu
Hungarian Investment
and Trade Agency
Address: 1055 Budapest, Honvéd utca 20.
Customer service: [email protected]
Telephone: +36 1 872 6520
Fax: +36 1 872 66 99
Web: www.hita.hu

The Hungarian Aeronautical Industry

Transcription

Similar documents

Hungary in the footsteps of Deaf Nation`s traveler Joel Barish

flyer - 2016

Hungary - World Music Network

HUNGARIAN DANCE

homoki vipera

Silver Rose Ball lepoello

New Years Eve

Hungarian táncház

An Airman`s Prayer - March 4, 1945: Szombathely Cathedral Project

Hungarian Bear`s Breeches