MT50 Mini Track Loader

®
Bobcat MT50 Mini Track Loader
SPECIFICATIONS
Performance
Bobcat
Attachments
for this
model:
MT50
Rated Operating Capacity
Tipping Load
Hydraulic Pump Capacity
Travel Speed
-Low Range
-High Range
500 lb. (227 kg)
1500 lb. (680 kg)
13.4 gpm
0-1.5 mph
3.2 mph (5,2 km) forward
1.5 mph (2,4 km) reverse
2497 lb.
5.2 psi
Operating Weight (with bucket)
Ground Pressure
Dimensions
Length (without bucket)
Width (with bucket)
Height
Height to Bucket Pin
69.5 in. (1765 mm)
36.0 in. (914 mm)
44.4 in. (1128 mm)
74.8 in. (1900 mm)
Kubota D722
Diesel/Liquid
3
20.0 hp gross, 18.8 hp net / 44 cu. in.
8 gal. (30,3 L)
Forward, reverse, travel speed controlled
by two hand levers.
Raise/lower and dump/rollback controlled
by two hand levers.
Hydraulic track drive system.
Single lever with dual direction detent.
Lift and Tilt
Transmission
Attachment
Standard Features
Options/Accessories
Just one worker can take on a variety of jobs with
the new Bobcat MT50. Its rated operating capacity
of 500 pounds makes this mini track loader the
perfect complement to your loader fleet!
48" Landplane
And look at its size. Only 36 inches wide and 69.5
inches long without attachment, it goes where
most other machines can’t — through doorways
and fence gates — to get you working in close
quarters indoors or outdoors.
Operation
Steering and Drive
48" Angle Broom
It digs, drills, trenches, moves material… along with
dozens of other tasks you’ll think up when you’re
out on the worksite. It’s easy to find things for the
MT50 to do because there are so many jobmatched Bobcat attachments to choose from.
Engine
Make/Model
Fuel/Cooling
Cylinders
HP/Displacement
Fuel Tank Capacity
MT50 Mini Track Loader —
the One-Man Crew!
Another big plus: the MT50’s rugged rubber tracks
keep you going in soft, wet or muddy conditions,
with minimal ground disturbance.
Auxiliary Hydraulics
Bob-Tach™
Mounting System
Gauges/Warning Lights
Lift Arm Lockout
w/Manual Bypass
Lift Arm Support
Lift Hook Locations
Neutral Start Interlocks
Parking Brake
Reverse Travel
Stop Panel
Tie-down Locations
Tilt Lockout
Two-Speed Travel
Attachment Control Kit
Light Kit
So grab yourself a handful of concentrated power —
and get to work with the new Bobcat MT50 mini
track loader!
500 LB. 13.4 GPM.
Rated
Operating
Capacity
Hydraulic Flow
36 IN.
Width
(with bucket)
NOTE - Where applicable, dimensions are in accordance with Society of Automotive Engineers (SAE)
and ISO standards. Specifications and design are subject to change without notice. Pictures of Bobcat
loaders may show other than standard equipment. All dimensions are given for loader equipped with
standard tires. All dimensions are shown in inches. Respective metric dimensions are enclosed by
parentheses. Bobcat Company complies with the requirements of ISO 9001 as registered with BSI.
36.0 in.
(914 mm)
94°
54.9 in.
(1395 mm)
100.5 in.
(2553 mm)
74.8 in.
(1900 mm)
38°
19.2 in.
(488 mm)
55.1 in.
(1400 mm)
44.4 in.
(1128 mm)
30°
30°
9.2 in.
(234 mm)
34.0 in.
(864 mm)
28.5 in.
(724 mm)
69.5 in.
(1765 mm)
91.4 in.
(2322 mm)
35.6 in.
(904 mm)
Bobcat Company
P.O. Box 6000 • West Fargo, ND 58078
www.bobcat.com
B-1748
Printed in U.S.A.
KnB-25M-403-#645028-F
Model 10 Auger
36" MT50 Bucket
Pallet Fork
Snowblower
38" Tiller
LT102A Trencher
48" Utility Blade
36" Utility Fork
Utility Grapple
MINI TRACK LOADER
One-Man Crew!
®
Bobcat MT50 Mini Track Loader
Get versatile! Hook up your MT50
to a wide choice of hard-working
Bobcat attachments, including:
Landscapers…Contractors…Rental Operators…
here’s the perfect complement to your loader fleet!
It’s tough…it’s versatile…it’s fast, agile and strong! The
new MT50 delivers all the rugged dependability you
expect from the Bobcat brand, along with all the jobsite
convenience of a walk-behind mini track loader!
What can it do?
You name it. The MT50 digs, drills, tills, trenches, moves
material — and all kinds of other jobs you’ll think of when
you’re out on the worksite.
STANDARD EQUIPMENT
Angle Broom
Auger
Utility Grapple
Sweeps snow, dirt and debris
from sidewalks, driveways and
warehouse floors.
Drills holes with speed and
plumb-line accuracy. Bits up
to 36 in. available.
Lifts and carries hard-to-handle
material: straw, hay, manure,
brush. Fits onto bucket or fork.
MT50 Bucket
Landplane
Pallet Fork
Designed to handle a wide
variety of jobs and materials.
Grades, levels, transports
material, breaks up hard
ground, peels sod.
Handles palletized material and
long objects, such as lumber
and fence posts.
Only 36 inches wide
The MT50 mini loader packs a lot of power in a small
package. It lets you work in tight spots, both indoors and
out…slips easily through most doorways and fence gates.
The instrument
panel is easy
to understand,
easy to use.
Simple to operate
Tiller
Trencher
Utility Blade
Digs and loosens soil, mixes
compost and other materials
into existing soil.
Handles a wide range of jobs,
including trenching close to
buildings.
Use it both as a snow blade or
dozer blade. Moldboard angles
up to 30 degrees.
500
Rated Operating
Capacity
74.8
Lift
Height
20
Liquid-Cooled
Diesel Engine
36
Width
(with bucket)
13.4
Auxiliary
Hydraulic Flow
• Bob-Tach™ Mounting System
Interface
• Reverse-Travel Stop Panel
• Lift Arm Lockout with
Manual Bypass
• Tilt Lockout
• Tracked Drive System
• Hydraulic Drive
• Auxiliary Hydraulics
• Liquid-Cooled Diesel Engine
• Parking Brake
• Gauges / Warning Lights
• Spark Arrestor Muffler
• Built-In Tie-Down Locations
• Built-In Lift Hook Locations
• Lift Arm Support
• Neutral Start Interlocks
• Two-Speed Travel with infinite
adjustment in low range
Parts and service backup
With every Bobcat product, you get
the support of a worldwide network
of dealers offering industry-leading
attachments, accessories and parts
availability. Their factory-trained
technicians are equipped to handle
all your parts and service
requirements, including engine and
hydrostatic/hydraulic components.
Unbeatable Bobcat warranty
The best equipment carries the
best warranty! The MT50 mini
track loader comes with a full
one-year warranty with
unlimited hours.
Operator Training
An operator safety video is available.
One-Man Crew!
®
Bobcat MT50 Mini Track Loader
Get versatile! Hook up your MT50
to a wide choice of hard-working
Bobcat attachments, including:
Landscapers…Contractors…Rental Operators…
here’s the perfect complement to your loader fleet!
It’s tough…it’s versatile…it’s fast, agile and strong! The
new MT50 delivers all the rugged dependability you
expect from the Bobcat brand, along with all the jobsite
convenience of a walk-behind mini track loader!
What can it do?
You name it. The MT50 digs, drills, tills, trenches, moves
material — and all kinds of other jobs you’ll think of when
you’re out on the worksite.
STANDARD EQUIPMENT
Angle Broom
Auger
Utility Grapple
Sweeps snow, dirt and debris
from sidewalks, driveways and
warehouse floors.
Drills holes with speed and
plumb-line accuracy. Bits up
to 36 in. available.
Lifts and carries hard-to-handle
material: straw, hay, manure,
brush. Fits onto bucket or fork.
MT50 Bucket
Landplane
Pallet Fork
Designed to handle a wide
variety of jobs and materials.
Grades, levels, transports
material, breaks up hard
ground, peels sod.
Handles palletized material and
long objects, such as lumber
and fence posts.
Only 36 inches wide
The MT50 mini loader packs a lot of power in a small
package. It lets you work in tight spots, both indoors and
out…slips easily through most doorways and fence gates.
The instrument
panel is easy
to understand,
easy to use.
Simple to operate
Tiller
Trencher
Utility Blade
Digs and loosens soil, mixes
compost and other materials
into existing soil.
Handles a wide range of jobs,
including trenching close to
buildings.
Use it both as a snow blade or
dozer blade. Moldboard angles
up to 30 degrees.
500
Rated Operating
Capacity
74.8
Lift
Height
20
Liquid-Cooled
Diesel Engine
36
Width
(with bucket)
13.4
Auxiliary
Hydraulic Flow
• Bob-Tach™ Mounting System
Interface
• Reverse-Travel Stop Panel
• Lift Arm Lockout with
Manual Bypass
• Tilt Lockout
• Tracked Drive System
• Hydraulic Drive
• Auxiliary Hydraulics
• Liquid-Cooled Diesel Engine
• Parking Brake
• Gauges / Warning Lights
• Spark Arrestor Muffler
• Built-In Tie-Down Locations
• Built-In Lift Hook Locations
• Lift Arm Support
• Neutral Start Interlocks
• Two-Speed Travel with infinite
adjustment in low range
Parts and service backup
With every Bobcat product, you get
the support of a worldwide network
of dealers offering industry-leading
attachments, accessories and parts
availability. Their factory-trained
technicians are equipped to handle
all your parts and service
requirements, including engine and
hydrostatic/hydraulic components.
Unbeatable Bobcat warranty
The best equipment carries the
best warranty! The MT50 mini
track loader comes with a full
one-year warranty with
unlimited hours.
Operator Training
An operator safety video is available.
®
Bobcat MT50 Mini Track Loader
SPECIFICATIONS
Performance
Bobcat
Attachments
for this
model:
MT50
Rated Operating Capacity
Tipping Load
Hydraulic Pump Capacity
Travel Speed
-Low Range
-High Range
500 lb. (227 kg)
1500 lb. (680 kg)
13.4 gpm
0-1.5 mph
3.2 mph (5,2 km) forward
1.5 mph (2,4 km) reverse
2497 lb.
5.2 psi
Operating Weight (with bucket)
Ground Pressure
Dimensions
Length (without bucket)
Width (with bucket)
Height
Height to Bucket Pin
69.5 in. (1765 mm)
36.0 in. (914 mm)
44.4 in. (1128 mm)
74.8 in. (1900 mm)
Kubota D722
Diesel/Liquid
3
20.0 hp gross, 18.8 hp net / 44 cu. in.
8 gal. (30,3 L)
Forward, reverse, travel speed controlled
by two hand levers.
Raise/lower and dump/rollback controlled
by two hand levers.
Hydraulic track drive system.
Single lever with dual direction detent.
Lift and Tilt
Transmission
Attachment
Standard Features
Options/Accessories
Just one worker can take on a variety of jobs with
the new Bobcat MT50. Its rated operating capacity
of 500 pounds makes this mini track loader the
perfect complement to your loader fleet!
48" Landplane
And look at its size. Only 36 inches wide and 69.5
inches long without attachment, it goes where
most other machines can’t — through doorways
and fence gates — to get you working in close
quarters indoors or outdoors.
Operation
Steering and Drive
48" Angle Broom
It digs, drills, trenches, moves material… along with
dozens of other tasks you’ll think up when you’re
out on the worksite. It’s easy to find things for the
MT50 to do because there are so many jobmatched Bobcat attachments to choose from.
Engine
Make/Model
Fuel/Cooling
Cylinders
HP/Displacement
Fuel Tank Capacity
MT50 Mini Track Loader —
the One-Man Crew!
Another big plus: the MT50’s rugged rubber tracks
keep you going in soft, wet or muddy conditions,
with minimal ground disturbance.
Auxiliary Hydraulics
Bob-Tach™
Mounting System
Gauges/Warning Lights
Lift Arm Lockout
w/Manual Bypass
Lift Arm Support
Lift Hook Locations
Neutral Start Interlocks
Parking Brake
Reverse Travel
Stop Panel
Tie-down Locations
Tilt Lockout
Two-Speed Travel
Attachment Control Kit
Light Kit
So grab yourself a handful of concentrated power —
and get to work with the new Bobcat MT50 mini
track loader!
500 LB. 13.4 GPM.
Rated
Operating
Capacity
Hydraulic Flow
36 IN.
Width
(with bucket)
NOTE - Where applicable, dimensions are in accordance with Society of Automotive Engineers (SAE)
and ISO standards. Specifications and design are subject to change without notice. Pictures of Bobcat
loaders may show other than standard equipment. All dimensions are given for loader equipped with
standard tires. All dimensions are shown in inches. Respective metric dimensions are enclosed by
parentheses. Bobcat Company complies with the requirements of ISO 9001 as registered with BSI.
36.0 in.
(914 mm)
94°
54.9 in.
(1395 mm)
100.5 in.
(2553 mm)
74.8 in.
(1900 mm)
38°
19.2 in.
(488 mm)
55.1 in.
(1400 mm)
44.4 in.
(1128 mm)
30°
30°
9.2 in.
(234 mm)
34.0 in.
(864 mm)
28.5 in.
(724 mm)
69.5 in.
(1765 mm)
91.4 in.
(2322 mm)
35.6 in.
(904 mm)
Bobcat Company
P.O. Box 6000 • West Fargo, ND 58078
www.bobcat.com
B-1748
Printed in U.S.A.
KnB-25M-403-#645028-F
Model 10 Auger
36" MT50 Bucket
Pallet Fork
Snowblower
38" Tiller
LT102A Trencher
48" Utility Blade
36" Utility Fork
Utility Grapple
MINI TRACK LOADER