CA Antique (all other parts)

Section 20A
ANTIQUE 1929-on
45-S/V-UL-K-Model
Preston Cycle’s 1939 UH
Brake ....................................... 40 to 44
Electrical ......................................... 2-7
Exhaust ........................................... 8-9
Fenders ....................................... 25-27
Frame Related ............................ 20-24
Gas Tank/Carb ............................ 28-33
Handlebar ................................... 18-19
Oil Lines ...................................... 35-36
Primary ............................................. 37
Springer ...................................... 10-19
Wheel .......................................... 38-39
PRESTON CYCLE PRODUCTS INC.
20A-1
Electrical
Replacement Battery Box for 45-Made in USA
For solo or trikes, top is included, order mount plate separately,
#19816 & #19817 include raw box with top.
PC#OEM# YearsModel
19816
66202-29 1929-52 (A) Solo (raw)
19817
66203-40A 1940-63 (B) Servicar (raw)
19113
66377-29 Top Only Raw
19114
66377-29 Top Only Chromed
19115
66302-29 1929-53 (C) Mount plate, ea.
19116
49180-36 1929-53 (D) Mount stud, pair
Headlamp & Horn Bracket Insulator Terminal Kit
Colony kit includes insulators, fender lamp wires, steel and brass
hardware for headlamp bracket to fender light on BT 1945-48 and
Servi-car 1945-57.
72096
Chrome Rear Stop Light Switches
We offer a full line of chromed mechanical stop light switches.
These switches feature steel construction, support plates and
chrome plating. Ideal for replacing worn-out stock parts or when
building a ground-up project.
PCPFits
2177 45” WL models 1937-57 and Servicars from 1937-50 pull-on style (72003-34T)
19098 Black as above
17202 XL & K 1952-66 push off style (72004-52)
Chrome Brake Light Switch Kit
Mechanical, pull-type brake light switch kit fits 1939-48 UL. Replaces OEM# 72003-34. Order mounting kit separately.
19197
20A-2
Wire Clips
PCPModel
Application
72449 45’s
Rear frame (9976)
72450 1936-69 BT
Front frame leg (9979)
72489 1961-84 BT
Frame head tube (10012)
72490 1930-49 45
Seat post tube, frame tube and
1936-49 BT
frame head (4730-30A)
72491 1930-48 BT
Brake light, battery wire (4727-30)
72492 1923-33 All
Taillight (4727-23)
72504 1940-57 45
Horn wire (4703-38A)
1940-57 Servi
1938-48 BT
72505 1936-64 74OHV Front spark plug cable (4726-36)
72520 1938-65 BT
Timer wire (4726-37)
72547 L1945-E47 BT Type I, frame head tube (bull neck) (1977)
72545 L1947-49 BT
Type II, Frame head tube (9977)
72546 1950-60 BT
Type III, Frame head tube (9977)
72586 1949-64 BT Timer cable clamp (9957)
72587 1936-48 BT
Timer cable clamp (4726-36A)
PRESTON CYCLE PRODUCTS INC.
Electrical
19322
2174
19047
Early Horns
19323
19360 6 V Horn (no wings)
2174 12V Horn (no wings)
19047 Bracket Only (69003-42)
Horn Terminal
Board Kit
Reprodiction of horn
terminal board complete
with fasteners. Used on
1942-52 WLA, WLC and
XA.
72789
Horn Mounts
PCPDescription
19322 VL horn mount kit 1931-36 (42 pieces)
19323 Horn mount kit all models except VL 1936-41
19324 Horn mount kit 1946-48
19326 Horn mount kit 1949-54
19327 Horn mount rubber 1936-41
19328 Lower horn bracket 1936-45
C
B
A
Horn Brackets
PCPOEM
19045 69130-36
19058 69120-36
19046 69120-45
19047 69003-42
Years
(A) Upper 1936-40
(B) Lower 1936-45
(B) Lower 1945-57
(C) Rear strap (all)
Horn Terminal Board Kit
Reprodiction of horn terminal board complete with fasteners.
Used on 1942-46 all models except WLA, WLC.
72819 Replaces 4829-42
Beehive Tail Lamp Kit
Includes glass top, red glass lens, top lens gasket, mount gasket
and parkerized mounting kit. Fits 1939-46 EL, U and 1941-46 FL.
21935
PRESTON CYCLE PRODUCTS INC.
20A-3
Electrical
Oil Tank, Battery & Fender Accessories
PC #
17009
2235
849
850
OEM #
66390-58, 66393-58
66373-36
62575-36
62585-36
Description (chrome)
Tall 6-volt hold-down rods
Battery top plate
Battery bottom plate
Battery plate bracket
12V Custom Battery
Custom size battery is ideal when converting to a 12-volt system.
3-19/32” wide x 4-1/16” long x 4-1/2” high. Rated at 5-1/2 amp
hours.
6875 37-64 FL w/12-Volt conversion or horseshoe oil tank
6V Batteries to Fit FL and FLH Models
PC Description
6878 H-2 type fits BT 1941-1964 (4” x 4-1/2” x 8-1/2”H) (66006-29D)
6 Volt Battery
6 Volt Battery Hardware
Fits BT 1936-64
PCPOEM Application
19287
66373-36
Top cover, black
2235
66373-36
Top cover, chrome
19288
66390-36
Rod set with flags and pads
66393-36
1936-57 (zinc)
19289
66390-58
Rod set with flags and pads
66393-581958-64
12595
66387-26
Wing nuts 1929-64 (pair)
5445
66100-15
Pad set (2 pack)
PCPDescription
6897 H-1 Style for 1929-36 VL and J’s 4” x 6.5” x 6.5” high
6898 1932-53 Indian for most models (must reverse for four’s) 4” x 6 1/2” x 7 1/4” high ID-I
Battery Terminal Kit
These faithfully reproduced
battery terminal fasteners and
felt washers will add a look of
authenticity to any restoration.
Fits all 6 volt Harley Davidson
1923-65.
5122
20A-4
Battery Flags and Hold Down Straps
PCPOEM
19288 66390-36
66393-36 19289 66390-58
66393-58
Application
Fits horseshoe oil tank with 6 Volt wwbattery 1936-57. Parkerized
Fits as above, 1958-64
PRESTON CYCLE PRODUCTS INC.
Electrical
Indian Complete Wiring Harness Kit
Complete harness kits with Cotton braided wire and asphalt loom
for 1940-53 Indians.
PCP#Description
28653
Chief 1944-47
28654
Chief 1948-53
Frame Electrical Terminal Screws and Fittings
Duplicate of OEM Kit# 1523-26A. Contains insulators, screws and
nuts os original. Fits 1936-1947 Big Twins and 45’s.
8942
Colony Housing to Frame
Clamp Bolt Kit
Kit includes parkerized bolts (8300132) nuts and lockwashers to mont
housing to frame. Kits fits 1 clamp
only. 2 Kits are required for both
clamps.
72092 Servi-car 1932-41
72093 Servi-car 1942-73
Generator Relay (Solid State)
3-post replacement generator relay for Big Twins and allows use
of “idiot light”. Replaces OEM 74750-38. Used on all 3 brush
generators 1938-57.
28103 Relay with chrome cover
Solid State Relay Eliminator
Replaces mechanical regulator on 3 brush generators 1937-57.
No sticking relays and moving parts to wear out.
28100 Relay eliminator 1937-57
Miscellaneous Antique Hardware
PCPDescription
19530 VL Ignition key 1926-36 (4521-36) (each)
19533 Timer wire clip 1938-65 (9971) (each)
19536 Throttle and spark coil spool 18-48 (3332-36) (ea)
19538 Clutch brake cable ferrule 1950-52 (each)
19539 Timer cable clamp 1936-48 (each)
19540 Timer cable clamp 1949-64 (9957) (each)
19541 Timer cable clamp 1937-46 (56626-37) (each)
19542 Timer cable clamp 1946-64 (each)
19543 Timer cable clamp strap 47-53 (56628-47) (each)
19545 Throttle cable clamp 1952-65 (56609-52) (each)
19546 Front brake cable clamp 1928-48 (4160-28) (each)
Plug Wire Holder Bracket
19633 1937-63 45 SV (32000-37)
3998 1966-on FL, 74 OHV Rear (32000-37A) chrome
DISTRIBUTOR BAND
Replaces 32710-36 on all 37-47 models, complete as illustrated.
PCPOEM
19018 32710-36 Band kit
19019 32732-37 Control bracket
19392 32735-37 Bracket 74 & 80 SV
19552 74765-36 Relay mount BT 36-46, OHV
19553 74765-47 Relay mount BT 1947-64, OHV
19554 32666-30 Plate spring washer (each)
19544 56628-54 Spark cable bracket 1954-64
19539 56625-36Clamp
19533 9971
Wire clamp
19454 56626-37 Timer cable to frame clamp 1937-46
PRESTON CYCLE PRODUCTS INC.
20A-5
Electrical
Early Distributors 1936-47
2 Bolt manual advance style distributor features natural alloy finished base
with shaft and gear installed, stainless
advance band, chrome top and clip, base
retainer and points wire. Top housing
also includes early point with spring set
condensor.
PCPApplication
19366 45 1936-47
19367 BT 1936-47
4047 Chrome cap
V-Twin Replica Coils
Steel jacketed coils include nuts, packing and wires.
1930-47 BT and 45 Models (31602-30)
19362 6V Black
19559 6V Chrome
19560 12V Black
19561 12V Chrome
Distributor Bracket
74 & 80 SV
1948-60(37604-48)
19563 6V Black
5079 6V Chrome
19562 12V Black
5078 12V Chrome
19392 32735-37
19277
Distributor Top Rebuild
Includes points, condensor, wire, washers, bushings, studs, and
hardware.
PCPDescription
19277 1936-47 Complete kit
19636 1937-47 Base only
19257 1948-60 Base only
Coil Mount Kits
PCPApplication
19361 45 Solo and Servi-car 1930-52 (zinc plated)
72327 VL 1930-36 and 45 1927-45
72281 BT 1937-47
CIRCUIT BREAKER POST REBUILD KIT
This item is an accurate reproduction of a repair kit offered by
Harley in the 1940’s and 50’s to repair damaged and broken
posts and insulators on all model Harleys 1930-48. The Colony kit
provides an installation tool to install the post.
4378Kit
Colony Spark Control Coil Frame Clamp
1930-47 Points & Condenser Set
19168 Includes spring
20A-6
Parkerized clamp (56626-37), screw, nut and lockwasher for use
on 1937-46 BT.
72627
PRESTON CYCLE PRODUCTS INC.
Electrical
Single Point Distributor
Features 2 bolt styling, manual advance and
natural alloy finish base with shaft and gear
installed. Top housing includes 1948-69
style single points, condenser and adjuster
plate, chrome top and clip, natural alloy
base retainer and points wire.
PCPDescription
28213 45’s 1948-52 WL, 1948-63 G and 1948 UL
28215 BT 1948-59
Coil Mount Kits
Complete reproduction coil mounting kit for 1937-47 UL. Includes
1723-36 u-bolts, 1723-36A spacers, 0256 lockwashers, 0107 nuts
and 1724-29 u-bolt straps.
72281
Circuit Breaker Ajusting
Screw Kit
Cad plated fasteners used on
1947-64 BT& 45’s Includes OEM
32593-47, 1062 and 7744.
72632
Single Point Distributor Parts 1949-60
PCPDescription
10101 Gear pin (255) (10 pack)
8146
Mount bolt kit (cadmium) (3779, 7035)
8145
As above, chrome
19252 45 Base with shaft (32506-37)
19256 Eccentric screws (30507-47A) (each)
18538 Bushing set 1936-69 (32525-36A)
2114
Chrome cover clip 1935-64 (32529-36)
4034
Timer gear 1936-69 (32531-36)
N/A
Breaker base 1937-46 (32578-37)
19257 Breaker base (32579-49)
3336
Base retainer FL 36-64, XL 54-64 (32585-36)
4047
Chrome cover 1936-64 (32589-36)
19251 Adjuster screw and plate kit 1947-63 (32593-47, 32594-47)
19254 Wire stud (32676-49)
19255 Distributor to coil wire (32690-30)
Generator Mounting Screws
45 Cu. In 1937-73
PCP
Year
Brush
5205 1937-57
3
1168
1937-57
3
5206 1958-73
2
1552 1958-73
2
Type (pairs)
Chrome stock
Cad stock
Chrome stock
Cad stock
74” & 80” ULH 1930-48
9108 1930-48
2
9109 1930-48
2
Chrome stock
Cad stock
Chrome Generator Mount Strap
Fits 3 brush type.
PCPApplication
19637 1932-52 45 and SV (30025-30)
Control Cable Wire Loom Clips
Spring steel clips have a parkerized finish and are sold each.
Parts book should be checked for proper fitment.
PCPOEM Application
19448 9977
Frame neck BT 1936-49
19480 9977A
Frame neck BT 1950-60
19481 1602-30 1” I.D. handlebar
19449 9977-46 Bull neck frame BT 1946-47
19451 9983
Tailamp wiring-left upper frame tube BT 1936-57
19447 9976
45” Rear frame (4 pk)
72450 9979
Front frame leg generator wire 1-1/4” BT 1936-69
19453 56615-49 1-1/8” I.D.
19454 56626-37 Timer cable 1937-46
PRESTON CYCLE PRODUCTS INC.
20A-7
Early Exhaust
CLAMPS NOT INCLUDED
WITH HEADER SETS
UL 3 PIECE STOCK EXHAUST SYSTEM
Replaces OEM #65445-37, 65492-39 and 65446-37. Fits all 74
and 80 cu. in. side valves. 1937-40.
4886Black
93051 Chrome
UL-ULH SYSTEM USA
4 piece unit for all flat head 74 and 80 1941-48. This allows the
use of any type of 1-3/4 muffler. May also be fitted to 1936-40
models for this purpose.
93055 Black
93056 Chrome
ON UL-ULH Flatheads use the 3-piece front header with muffler
with built in Y on 1936-40, or use the 4 piece system and utilize
any 1-3/4 muffler for later years.
UL STOCK MUFFLER WITH BUILT IN Y-PIPE
Replaces OEM#65201-37. Used on all 74 & 80 cu. in. side valves
1937-40 and 1936-40 Knuckles.
4888Black
93052 Chrome
UL Clamp Set 1941-48
19005 Black
19216 Chrome
UL Clamp Set 1937-40
19002 Parkerized
19215 Chrome
VL STOCK REPLACEMENT MUFFLER
Replaces OEM #1001-30. Fits all 1930-36 side valve BT
4890Black
93054 Chrome
VL 2 PIECE HEADER SET
Replaces OEM #1004-30 and 1007-30. Fits all 1930-36 side
valve Big Twins.
4891Black
93053 Chrome
VL Clamp Set 1930-36
19006 Black
19217 Chrome
20A-8
PRESTON CYCLE PRODUCTS INC.
Early Exhaust
CLAMPS NOT INCLUDED
WITH HEADER SETS
45 MILITARY STOCK REPLACEMENT
MUFFLER
Fits all 45’s 1940-45 military bikes.
93002
45 Chrome Muffler 1945-50
93009
45 CUBIC INCH 2 PIECE HEADER SET
Replaces OEM #’s 65490-41 and 6545241. Fits all 45’s 1941-52 Solos and Servicars. Black Finish.
4878 Black (1006-41)
19811 Chrome
1945-50 (65228-50)
45 LATE TYPE CIVILIAN MUFFLER
Replaces OEM #65228-50. Stock on all
1950-52 45’s.
93003
45” Clamp Set 1941-73
19007 Parkerized
19218 Chrome
SERVI-CAR MUFFLER USA
Black painted muffler replaces OEM
65220-51. Use on all 1933-73 45” ServiCars.
93004 Black
93017 Chrome
Chrome Flex Exhaust Covers
1-1/2” Cover slides on to fit all 45 models.
Sold each.
2421
45’s
1-5/8”
EXHAUST PIPE NIPPLE AND NUT
Nickel plated, accurately reproduced nuts
and nipples fit the following:
9209 Nipple 74 & 61, 1924-29, (1012-25)
Fishtail Muffler 1932-48
Fits ALL Two Wheel 45’s with 2-1/2” I.D.
1932-48.
6328 Chrome fishtail muffler
45 CIVILIAN STOCK REPLACEMENT
MUFFLER
Replaces OEM #1035-32. Stock on all
45’s 1932-49.
6809 Black
Clutch & Brake Hand Lever Clamp Bushing Kit
Cadmium plated bushing (45033-41), washer (6543) and cotter
pin (512) used on all 1941-48 Harley models.
72730
PRESTON CYCLE PRODUCTS INC.
20A-9
Springer Parts
Spring Fork Rod Kit
Springer Acorn Nut and Retainer
Chrome plated acorn nuts and cadmium
plated spring retainers for 1930-48 Davidson Springers.
5120
Chrome Plated Stem Nut
Nut is designed to fit Big Twin and ‘45’
Springers. The shoulder on its base fits
into the top triple clamp for positive alignment.
5130
Big Twin Springers
5161 ‘45’ Springers
SPRINGER STEM NUT.
Reproduction stem nut for Big Twin 193648, 45’s 1929-52.
PC#FinishFits
5250
Chrome Big Twin
5251
Cad
Big Twin
5252 Chrome45”
5253Cad 45”
Rods are heat treated for wear resistance
and parkerized as original.
2318 BT, 45 1936-47
45” SOLO FRONT AXLE.
Replacement front axle for all 1930-52 45”
Solo models only. Replaces OEM #4387130.
19028
Springer Cone Nut
OEM machined gear type with dust shield
pressed on.
PC#OEM Model
19024 48327-36 74-80, 1936-47
19607 As above Chrome
19025 48335-40 45, 1929-57
Front Hub Bearing Cone Retainer & Lock Nut
Accurate reproduction of OEM 43633-44
retainer and OEM 43885-30 nut. Fits all 45
solo 1930-on
9302 Chrome plated
9303 Cad plated
1946-57 Rod Bushings and Plate
19119 Ball bushings (45643-45)
19120 Retainer plate (54230-45)
Chrome 8” Springer Hub Cap
Replaces 43300-48 for all 1936-48, 74,
1941-57 Servicar front wheel.
45011
20A-10
This chromed bar fits between the side car
loops on 1936-57 stock rigid frames.
19118
ROCKER STUD LOCK TABS
PC#Type Year/Qty
5116
Big Twin 1936-48 (6)
19026 45 Solo 1945-52 (2)
Front Shackle Hardware
Shackle bar includes 2 bushings and is
offered in black or chrome. #2321 is a full
hardware kit including all parts in picture.
3 piece rebuild kit includes shoulder bolt,
lock tabs, and nut/greaser fitting.
19121 Black shackle bar
19122 Chrome shackle bar
2321 Complete hardware kit only
19123 3 piece kit
19124 Lock tab (5 pack)
19125 Bushings (pair)
Rigid Frame Vibrator Bar
SPRINGER FRONT BRAKE DRUMS
Cast construction available in black or
chrome, replaces OEM 44133-36 on 193647, Servi 1941-57.
PCPFinish
19802Black
19803Chrome
PRESTON CYCLE PRODUCTS INC.
Springer Parts
Complete Rocker Rebuilding Kit
Includes all components pictured to completely rebuild the rockers on 1930-48 Big Twin Springers, and 1941-57 Servi-car. All
parts are interchangeable with new old stock factory parts. Materials, heat treating, and plating are of OEM quality.
2319
Big Twin 1930-48
9216 45 Solo models 1930-52
Springer Front Brake Grease Seal Kit
Fits Big Twin Springers 1937-1948. Also
Servi-Car 1941-1957.
5287
Rocker Stud Bushing Remover/Installer
Tool
This piloted mandrel and support sleeve
simplifies bushing removal and installation. Prevents damage to rocker or
bushing.
5118
Springer Spring Rod Bushings
Precision machined bushings are heat
treated for wear resistance and cad plated
as original. Fits 45” and Big Twin Springers
1931-47.
2317
Front Rocker Stud Assembly
Contains one hardened ground bushing,
one hardened and ground rocker stud with
end plug, one 1/2-20 hardened nut and
two lock tabs.
5114
45 Fork Rocker
Replace 45661-30 on 45 models 1930-52
Solo models, pair OEM finish.
19027
Colony Steering Damper Upper
Kit
Reproduction of chrome lever and all upper steering damper fasteners used on
1936-48 BT.
72584
Rear Rocker Stud Assembly
Contains one hardened and ground bushing, one hardened and ground rocker stud
with spool spacer and 3/8-24 nut for fender
mount, one 1/2-20 hardened mounting nut
and one lock tab.
5115
Colony Steering Damper Upper
Kit
Rocker Stud Bushing Kit
Contains four hardened and ground rocker
stud bushings, exact duplicate.
5117
Big Twin Springer
5163 Harley ‘45’ Springer
Springer Front Fender Mounting Kit
Reproduction of hardware used to install
stock front fender on all 1936-48.
2179Kit
5162 Locks Only
Reproduction of parkerized lever and all
upper steering damper fasteners used on
37-52 45’s and 53-57 Servi-cars.
72585
Lower Bearing Guard
Centres lower race on stem.
19382 BT 1936-48 (48361-38)
19383 45 1926-57 (48363-40)
PRESTON CYCLE PRODUCTS INC.
20A-11
Springer Rebuild
Springer Fork Spring Set
Includes 2 upper 46055-30 and 2 lower
46056-37 for 1937-48 Big Twins,1937-57
45 models. Available in chrome or raw (for
painting). Exact replica!
13221 Raw Set
13223 Chrome Set
Inner Spring Springs
Take bounce out of springer forks. Lower
replaces 46056-37 cushion spring. Upper
replaces 46058-36 recoil bumper spring.
Sold in pairs. USA
PC# TYPEFINISH
13224 Lower Raw 5-1/2” x 1-1/4”
13225LowerChrome
13226 Upper Black Oxide 3-1/4” x 1”
13227UpperChrome
Springer Front Brake Cable Adjuster
Cad plated duplicate of original Harley
part. One or two locknuts included depending on application.
8624 Big Twin 1941-1948, Servi-Car 1941-1957
8818 Big Twin 1950-1971, XL
1952-1972, FX 1971-1972
277
Chrome as above
Front Brake Shackle Rebuild Kit
High quality reproduction of original Harley parts used on 1936-48 Big Twin and
‘45’ Springers.
2321
Steering Dampner Assembly
For Springer available as a complete kit.
PC#OEM Models
19611 2776-36 BT 1937-40
19039 46700-41 BT 1940-45
19040 46700-46 BT 1946-48
19041 46701-40 45 1940-57
CLUTCH & BRAKE LEVER PIVOT
SCREW KIT
Cad plated reproduction of pivot screws
and nuts used on clutch & brake levers.
Big Twins & 45’s 1941-1964.
5409
Flanders Style Riser
Original type rubber mounted with 4”
rise for Springer Dog Bone style top tee.
Chrome plated pair.
3062
Stainless Steel Spring Top Plate
Use on all models with in line post. Replaces 46550-36.
19035 Stainless Cover
19267 As above for offset
20A-12
Complete Springer Genuine Rocker
Rebuild Kit
Use on all Springers, 45 type 1930-1952,
as pictured. Use on non-removable drum
type.
19038 45” Rocker Rebuild
Springer Top Tees
Allows 1” dog bones or Flanders risers to
be used to mount handle bars on 1936-48,
74-80 & 45 Springers, Chrome
PC#TYPE
OEM
19103 Inline w/ Ears
56119-49
BRAKE COUPLING AND OILER
Cad plated solid brass coupling is an exact
reproduction of the original Harley design
and includes the dust cover. Coupling
OEM# 4142-30. Fits all models H.D. 193038.
9004
PRESTON CYCLE PRODUCTS INC.
Springer Parts
19804
19806
Springer Fork Head Light Bracket 1936-47
This reproduction mounting bracket fits
1936-on 45” 74” and 80” Twins. The late
type will allow for the use of stock shock
absorber.
PC# OEM# TypeFinish
19806 4966-36 EarlyBlack
19804 67810-36Late Black
RIDE CONTROL 1933-46
Reproduces as original to control the action of the Springer Fork. Feature Chrome
steel side bars with black control knobs.
Replaces 11250-36 on 1937 up 61-74+ 80,
1940-47 45 models. USA Made.
PC#OEM ITEM
19808 11250-36 Complete Kit
19866 As above Chrome
19105 13421-33 Friction discs 4pc
19106 13454-33 Bushings (pr)
19107 13440-33 Control knob
Springer Shock Assembly 194657
Includes all shock and mounting hardware
for 1946-57 spring fork. Has a black finish
and replaces 54200-45.
PCPDescription
19807 Complete kit
19043 Hardware only
19303 Bushing set (14002-45) 4 pcs
Springer Head Light
Spotlamp Brackets Only
Complete, replaces 67701-35, 6V. Exact
with reflector and Bezel, plus glass lens.
PCPDescription
832
Chrome Assy.
3558
Black Assy.
3552Bezel
17015 12V Bulb (each)
19344 Black bracket set, ride control
19345 As above, chrome (11369-38)
19347 Blk/nuts for above (68620-46)
Springer Spotlite
Replaces 11366-38 for all Springer forks,
12 volt bulb type, 1938-48 style.
4596 12 volt
Springer Spot Light Bar
Chrome, fits all Springers 1936-47, replaces 68616-46.
19042 Spot light bar
Ball Bearing Neck Cups
Springer Front Axle
Fit Big Twin 61-74 & 80, 1936-48, 1941-57
Servi-Car. Axle and spacer are chrome
plated.
PC#
OEMType
3675
43872-36 Chrome Axle
19044 43872-36 Black Axle
1900143884-36 Spacer
1900043882-36 Sleeve
Available in pairs in either cadmium plated
cups only or chrome plated kit with races
& balls.
PCPApplication
5757
74”-80”, 1936-48 (cad cups, pr) (48311-36)
5758
1930-52 45” (zinc cups, pr) (48310-30)
19172 Chrome kit for 45 1939-57 (as above)
15700 5/16 Balls (50 pk) (8860)
BALL BEARING RACES
74 and 80 BT Springer and early model
Sportster type (1957-77) available. Each
PC#OEM USE
19049 48350-39 Upper/lower 45”
48346-391929-57
19050 48345-36 Upper/lower 74-80
1936-48
PRESTON CYCLE PRODUCTS INC.
20A-13
Springer
Speedster Handlebars
Spring Fork Assemblies
Assemblies include: full spring set, inner and outer, front and rear
legs; rocker set with all studs and bushings; and spring rods with
bushings. Top clamp, neck races, and cone nut; not included. 45
solo models have inside rockers for small axle and internal brake
wheel. All other forks have offset mount rocker to allow interchangeable wheel with lug bolt type drum. Chrome assemblies
feature chrome front legs and outer springs. Some assembly is
required.
ChromeBlack Model Type
-
98905
Solo45
-
98906
Trike
45 Servi
98912
-
Big Twin 74 inline
9891398909Big Twin 74 offset
Exact replacement of the In Line type Springer bars used on
74-80-45’s 1937-45, 1937-48 45 45 Models, 1936-57 Servi-cars
replaces 55903-37. Painted or chromed as described; internals
not included.
ChromeBlack OEM
Description
930119300755951-36 (A) Speedster, inline
930209302155901-37 (B) Standard, inline
930139301255950-36 (C) Buckhorn, inline
930229301455954-46 Speedster, offset
9301693015
Buckhorn, offset
930239302455901-46 Standard, offset
19200
Internals for bars listed above
9217
6033-30
Chrome pinch bolt
9218
6033-30
Cad pinch bolt
9508
4636
Parkerized pinch bolt
45” and Big Twin Fork Legs
Fork legs fit 1936-52 45” and Big Twin 1936-48 models. Fork leg
has a 1/2” hole at the rocker area.
Rigid Rear Spring Fork Leg
PCPApplication
98902 1940-57 45 solo plain rear leg (45526-40)
98917 As above, chrome
98918 45 Servi black rear leg (45527-41
Front Spring Fork Leg
98903 BT spring fork with rods (45610-40)
98904 As above, chrome
98919 45 black front leg (45610-40)
98920 As above, chrome
2318 Spring rods (pair) (45641-36)
Handlebar End Nuts
Exact reproduction of handlebar end nuts used on 1910-1974
Harley Davidson.
7626
with 57/64-24 thread fits all Twins 1937-48.
7625
with 13/16-24 thread fits 1922-30 all models. 1936 61” only, 1931-36 all models.
9214
w/3/4-16 thread fits K, XL 1954-72, FL 1954-74.
Spring Rod Stabilizer
Reproduction of original 1930s accessory. Fits 1930-1948 all Springers, includes 2 nuts.
19029 Brass construction
Handlebar Throttle & Spark & Roller Pin Kit
Hardened and ground rollers, pins and cable screw.
8923 All H-D 1910-48, OEM: 9281, 56278-10, 56283-31
8924 All H-D 1954-74, OEM: 9261, 56278-10, 10-32 set screw
Throttle & Spark Coil Spool
1918-48 (each)
19536
20A-14
PRESTON CYCLE PRODUCTS INC.
Handlebar
Inner and Outer Throttle
Spark Casing Assembly
PCP#OEM# Description
19175 56502-32 1932-48 Outer, large, vinyl 48”
19176 56502-32 As above, with vinyl cover
19177 1909-31 Outer, large, nickel
19178 56528-49 1948-72 Outer, small
19276 56628-49C 1949-52 Outer, small, cotton braid
19179 56360-61 1961-on Outer, small
19180 56373-09 All, inner wire 1909-64
19181 56420-09 1909-48 Cable end
Throttle Control Parts All Twins 1949-53
PCPOEM Description
19178 56528-49 Outer control casing
19180 56373-09 Inner wire
Throttle Control Parts All Twins 1954-64
PCPOEM
Description
19183 56400-53A Plunger #68
19178 56528-49 Outer control casing
Handlebar Spirals
PCP#OEM# Description
19206 56245-35 1936-48 chrome
19207 56220-48 1949-53 raw
19208 56220-53 1954-70 raw
19209* 56220-58 1971-74 throttle, raw
Note: Reverses direction on 1954-70 throttle
Throttle Spirals and Cable Kits
Kits include all internal parts required for years listed.
PCP Years SidesThrottle
19200 1936-482
Push
19201 1949-532
Push
19202 1954-732
Push
19203 1965-701
Push
19204 1971-731
Pull
Throttle Control Parts All Models 1936-48
Throttle Control Parts
Handlebar Plunger Kit, replaces OEM# 56271-36
Fit 1937-48, 74 & 80 Twins (OEM# 9281, 56270-36, 56278-10 &
56281-31)
51000Kit
PCPOEM
51000 56271-36
19206 56245-35
7626 56287-36
7625 3330-31
8923 9281,
56281-31,
56278-10
19268
Description
Complete plunger kit
Chrome spiral
Cadmium handlebar end nut (pr)
Cadmium handlebar end nut (pr)
Handlebar control roller and pin kit
Outer & inner wire w. plug 1932-48
PRESTON CYCLE PRODUCTS INC.
20A-15
Springer Parts
Long 1909 Grip Set
OEM replacement #3310-09. Original style used for restoration.
Custom application must be shortened. Fits “74” and “80” most
stock controls.
5540 Black
Spring Fork Top Trees and Risers
PCPOEM
19310 19103 56119-49
19198
19221 56118-49
3062
19035 46550-36
19267 46550-46
Description
(A) 4” Dog bones
(B) Chrome tree with ears inline
(B) As above, zinc
(C) Zinc tree with ears offset
(D) 4” Chrome Flanders risers
(F) S.S. cover inline
(F) S.S. Cover offset
1952 Style Stock Grips
OEM replacement #56212-53. Replica-waffle style. Fits all H.D.
models 1949-1961. Sold in pairs
5437 Black
Waffle Style Grips
Nostalgic style waffle texture for 1974-up Twins, 1” + 1-1/8”
5440 Black set
Short Stock Grip Set
Smooth original style. OEM replacement #56205-62A. Set includes chrome end plugs. Fits FL-FLH 1962-1973.
5271 Black
5272 White
Spring Fork Installation Kits
Complete kits include zinc plated neck cups, ball bearings, upper
and lower races, black nut with dust cover pressed on and parkerized top nut.
PCPApplication
19311 Ball type 45”, Servi 1939-57
19312 Ball type BT 36-48
19313 Timken type BT 36-48
Front Vinyl Brake Coil 193148
19535 4143-30C (each)
Cable Oiler Kit
19556 1939-48 (45102-39)
Riser Stantions
Stantions fit spring fork top trees with 1” ears to allow rubber
mounted glide risers to be fitted with 1 piece later style handlebars. Sold in pairs.
19173 Chrome glide risers
19174 Zinc stantions
Brake Coil Ferrule 1931-48
19537
20A-16
PRESTON CYCLE PRODUCTS INC.
Springer Parts
Not Included
Not Included
Not Included
Not Included
2319
Fork Rocker Rebuilding Kits
PCP# 2319 includes parts shown except where noted as “not included”. All parts are interchangeable with OEM hardware.
BT 1930-48
2319 Complete hardware rebuild kit Servi Car 1941-57
5115
5114
19315
5116
5117
19317
Rear rocker stud kit
Front rocker stud kit
Rocker set (45655-30, 45658-30)
Lock tab kit (6 pk)
Bushing set (45667-30) (4 pk)
Spacers (45684-41) (pair)
Complete Black BT Rocker Kit
Rockers fit BT 1936-48 and Servi Car 1946-57. Includes locks, all
studs and installed bushings.
19314 Kit as shown
19315 Black rockers only
19316 Chrome rockers only
45 Solo Model 1930-52
19038 Complete hardware kit
9216 As above, Colony
19318 Chrome rocker set with 5/8” holes
19027 Rocker set, stock (45661-30)
19319 As above with studs
5163 Bushing set (45668-30) (4 pk)
5118
Bushing installer/remover BT, 45 rocker
19026 Lock tabs 1945-52 (pair)
SPRINGER MIRRORS
Original style black finished, great for restoration 1930-up, exact
duplicate of the OEM part, made in U.S.A.
OEM TYPE
1908711350-34
Stock
19088*11350-41M
Military
*Military version features adjustable stem.
PRESTON CYCLE PRODUCTS INC.
20A-17
Handlebar
Complete Spring Fork Handlebar Assembly
Speedster style bars feature cloth covered wires, chrome horn
and dimmer switches and are fitted with all internal throttle components including cables and grips.
93025 Black inline
93026 Chrome inline
93030 Black offset
93031 Chrome offset
Throttle & Spark Cable Brackets
Feature per finish and hardware.
PC# OEM
#Year/Model
19078 3371-36 A 1936-48 OHV BT
19079 3371-37 B 1937-48 SV BT
19080 9967
C 1930-73 45”
19081 55627-38 D 1930-48 SV BT
Type
Throttle
Throttle
Throttle & Spark
Spark
93036
93037
Spring Fork Handlebar
Handlebar Cross Bar
Curved, 1” bar features milled ends and fits 1936-57 spring fork
bars. Includes 2 chrome clamps and bolts.
19847
Hollywood style handlebar with cross bar includes internal throttle
components, cables, grips, chrome horn and dimmer switches with
cloth covered wires. Fits 1936-40 EL, 1936-52 WL, 1936-58 G, 193845 UL and 1941-45 FL.
PCPFinishType
93036 BlackOffset
93037 BlackInline
93038 ChromeInline
93038
93039 ChromeOffset
Handlebar Bolt Kit
Duplicate of pinch bolts used on
1936-48 BT Springers, 1940on 45 Springers. OEM 4636
includes lockwashers.
9217 Chrome
9218 Cad
9508 Parkerized
Handlebar Plunger
Accurate reproduction of throttle and spark plunger. 2 plungers
per kit for the following:
PCPOEM Description
9505 3316-36
1936 61”, BT 1937-48, 45 Solo and
Servicar 1940-48
9804 3316-31
45 Solo and Servicar 1931-39, VL 1931-36
Colony Front Brake Cable
Handlebar Clip
Parkerized clamp (9980), screw, nut
and lockwasher for use on 1928-48
BT and 1932-57 Servi-cars.
72628
20A-18
PRESTON CYCLE PRODUCTS INC.
Handlebar-Front End
Chrome Spring Covers
Spring Fork Windshield 36-47
Includes zinc fitting for handlebar mounting. Mount kit available
separately.
52144 Complete shield
1941-48 BT Spring Fork Cable & Handle Kit
Includes replica style cable with oiler fitting and end ferrules, a
polished or chrome handle and clamps to attach cable to bars
and fork legs.
PCP
Handle Finish
50238 Polished
50239 Chrome
Available to fit upper and lower
springs and rocker studs on Big
Twin. Order as required for 193657 spring forks.
19386 Lower round (pair)
19387 Rocker tear drop (pair)
19388 Rocker with bird (pair)
1941-64 Replica Brake Clutch Handle
Features accurately formed clamp and cadmium plated hardware
to replace 45002-41.
50236
50241
Replica Lever Assemblies
Replica Brake Lever
Chrome reproduction complete as pictured for 1928-40 Springer
models. Replaces 45002-28.
50237
50244
50245
50242
Include slotted lever bushing as original with small hole for brake
or clutch.
PCPFinish Item
50208 Chrome Complete assembly (45002-41)
50207 Polished Complete assembly (45002-41)
50241 Chrome Complete with ball end
50242 Polished Lever only with ball end
50243 Chrome Lever only with ball end
50244 Lever only, stock style (45017-41)
50245 Chrome Lever only, stock style
16280
Lever clamp strap
5409 Cadmium 1941-64 Pin and nut (45031-41)
10160 1949-64 Lever bushing w/cotter
(45033-49)
PRESTON CYCLE PRODUCTS INC.
20A-19
Frame Related
Colony Seat Post Bushing
Installation Tool
Heat treated with a black oxide finish.
Use tool to install seat post bushing.
72087 45 and Singles 1929-on, VL 1930-36
Rear Stand Pivot Bolt
45 Footboard Support Rods
Fits BT and 45” 1938-57 models.
Replaces 49570-38.
19589 Each
19391 Solo models 1932-52
45 SOLO TOOL BOX BRACKET
Fits 1941-52 45 solo. Replaces
64450-41. USA made, zinc
plated.
19074
BT Side Car Connector Kit
Comes complete with upper, front and lower fittings.
19590 87136-37 Sidecar front tire rod
Rear Frame Stands
Fits rigid 74, 80 and 45 models. Has painted or chrome finish
and requires stand clutch and mounting hardware to be ordered
separately.
PCPOEM Application
19813 49502-36 1936-52 45 Solo, painted
19840 As above, chrome
19077 49581-36 45 Solo catch, black
19273 As above, chrome
Left and Right Sidebar- Front and rear Support
Rod Mounting Kit
Accurately reproduced special shoulder nuts, nuts and washers fit
all 45’s 1932-73.
PCPDescription
9802 Parkerized
Rear Stand Mounting Hardware
Sidecar Body Support Rods Stud Repair Kit
Complete kit contains studs, bushings, washers and nuts to
rebuild your support rods back to factory specs. Used on 1941-84
models.
72433
20A-20
Parkerized hardware kits are an accurate reproduction of original
Harley fasteners used to mount the rear stand.
19014 BT SV 1930-36 (4526-35)
19015 OHV 1936, BT SV 1937, 45 1936-38
19022 45 1939-on
9616 As above, chrome
PRESTON CYCLE PRODUCTS INC.
Frame Related
Early H.D. Footboards WITHOUT Black Pads
Fit 1914-39 (2938-14)
3777 Raw finish
Jiffy Stand Parts 45 Solo 1929-52
45 Floorboards Brackets
Fits all 1929-52 solo models 1933-73, Servi car, 4 piece set,
black, OEM type.
5500 Brackets Only
PCPOEM
19389 50002-32
19398 50002-32
13232 50012-30
13231 50012-30
19070 50035-30
19397 50045-32
19071 50060-30
19446 50060-30
19072 50092-30
19073 50110-30
19349
Description
Complete assembly, black
Complete assembly w/chrome leg
Spring, black
Spring, chrome
Spring plate, zinc
Mount bracket
Jiffy leg, black
Jiffy leg, chrome
Leg bushing
U-bolt (ea)
As above cad plated
Colony Jiffy Stand Leg Bracket U-Bolt Kit
Footboard Hinge Bolt Kit
Cad plated reproduction of special shoulder bolts used to mount
footboards on all Harley Davidson 1914-up.
5364
Parkerized 1723-30 u-bolt, nuts and lockwashers used on 193052 45” Solo and 1930-36 VL.
72653
Rear Fender Mounting Strap
1936-57
Footboard Stud Mounting Kit
19329
Parkerized duplicates of original fasteners used to mount footboard studs.
9905 BT 1936-57 (shown)
9906 Servicar & 45 Solo 1935-on
Floorboard Extension Pads
Pads clamp on to 1914-65 style floorboards. Replaces 52654-33, 52655-33,
52668-33.
19444 Parkerized
19445 Chrome
PRESTON CYCLE PRODUCTS INC.
20A-21
Frame Related
Original Style Buddy Seat (Vinyl)
96163
Footboard Mounting Stud Kit
Correct parkerized reproduction of studs, nuts and washers used
to mount floorboards.
PCPApplication
72605 1914-22 All models (2948-14 stud)
72606 1914-28 All models (2949-14 stud)
72607 1925-28 All models (2951-24 stud)
Replica Thin Style Solo Seat
Black leather seat features rolled sewn edge with a black rivet
strip. Vented steel base plate accepts T-bar type mounting system. Order mount bar and hardware separately. Fits WL 29-52,
VL 30-36, EL 36-40, UL 37-48 and G 37-72.
96020
Footboard Mounting Kits
Correct parkerized reproduction of studs, nuts, and washers used
to mount floorboards.
PCPApplication
72579 1935-73 45’s and Servi-car
72604 1930-36 VL
Parkerized Seat Post Assembly
Heavy duty seat post assembly with installed springs, hex nuts
and spacers. Swivel top tab pin is pressed in place as original.
Seat post diameter is 1.180”. Fits EL 1936-40, UL 1937-48 and
FL 1941-80
82090
45 Tool Box Kit
Kit includes chrome tool box, zinc bracket, mount kits and two
keys. Bolt on bracket. Fits 1941-52 W models.
19702
20A-22
PRESTON CYCLE PRODUCTS INC.
Frame Related
Skid Plate Mounting Hardware
Reproduction of fasteners required to mount skid plate on 194042 WLA.
72590
Machine Gun Bracket and Ammunition Box
Mounting Kit
Correct reproduction of all fasteners used to mount OEM 1120242M and 11201-42M brackets on 1940-42 WLA.
72554
Colony Seat Post Rod, Nut and Spacer Kit
Reproduction of OEM 15-7/8” seat post rod. Includes nuts and
spacers. For use on 1929-73 45’s and Servi-cars except military
models.
72659
Legshield Mounting Kit
Accurate reproduction of all fasteners required to mount
legshields on 1940-42 WLA.
72597
Colony Seat Post Rod, Nut and Spacer Kit
Reproduction of OEM 14-¾” seat post rod. Includes nuts and
spacers. For use on all HD WLA and WLC models.
72583
Colony Seat Post Rod, Nut and Spacer Kit
Reproduction of OEM 15-7/8” seat post rod. Includes nuts and
spacers. For use on all 1936-80 BT except FX.
72612
PRESTON CYCLE PRODUCTS INC.
20A-23
Highway Bars
WARNINGS: These Highway Bars are for cosmetic use
WARNINGS:
Highway
are for
cosmeticin
use
only and will These
not provide
leg Bars
or vehicle
protection
the
only
not provide
orare
vehicle
protection
in the
eventand
of awill
low-speed
fall. leg
They
not made
or intended
event
of a low-speed
areinjury
not made
or intended
to provide
protection fall.
fromThey
bodily
in a collision
withto
provide
protection
from
bodily
injury in a collision with an
an automobile
or any
other
object.
automobile or any other object.
PCPOEM Year Model
93010 49035-35B1929-73 45 Solo and Servi, black
93019 49036-35 1929-73 As above, chrome
45” CRASH BARS
Fits 1929-73 Solo, Servi-Car front 1936-73
PCP
OEMTYPE FINISH
93008 49150-29B Rear 1929-52 Black
93018 49151-29C Rear 1929-52 Chrome
“U” Clamps
Forged design like OEM.
PCPOEM
Application
19280 31734-36 74-80 Spark coil (pr)
19281 31735-29 45 Spark coil (pr)
19075 49061-32 45 Front engine bar (pr)
19283 49064-36 Side car front clamp (pr)
19284 49177-38 45 Rear engine bar (pr)
19073 50110-30
45 front jiffy stand (ea)
19285 87701-79 Rear late side car (pr)
45 Rear Bar Mount Kit
Kit includes 49180-36 studs (2), 49177-38 “U” clamps (2), and
66302-29 mount plate for solo models 1938-52.
PCPDescription
19076 Complete kit
19115 Mount plate
19116 Stud set
Front Safety Guard Mounting Kits
Reproductions of u-bolts, nuts and washers to mount front safety
guards.
Chrome
Parkerized
Year
Application
OEM
72204
72203
37-47
61”, 74”, 80”
49064-36
72768
72767
32-73
45”
49061-32
20A-24
Colony Rear Crash Bar Mounting Kit
Parkerized u-bolts (49177-38), studs (49180-36), plate (6630229), nuts and washers used to mount rear crash bar on 1938-52
45” solo models.
72682
PRESTON CYCLE PRODUCTS INC.
Front Fenders
Springer Front Fender for ServiCars & 45’s
A genuine reproduction of the original. This fender is the final
touch for your restoration or custom needs. Fits all Servi-Cars
1949-53, 45’s 1949-57 and can also be used on 1936-48 Big
Twins as a custom application.
6008 OEM 59007-50
Spring Fork Front Fenders
Are full width 7-1/2” for 16” or 18” wheels with riveted on braces.
45 type fits with rockers inside the forks. BT fits with outside rockers.
PCPApplication
88205 BT 1936-46, replica w/thin braces
88218 45 1937-52
88220 RL 1934-36, replica (3702-34)
27285 Lower brace set BT 1936-48 (59135-36)
4501 Stainless steel trim for above
Springer Front Fender
Stainless steel fender trim set. Relaces OEM #59200-39. Fits all
1940-48 all models; 1949-up 45’s. Complete with clips. USA
4501 Kit
Fender Trim Fastening Clip
Replacement trim clips only. Replaces
OEM #59225-39.
5548 1939-48 (25 pack)
Front Fender Mounting Kit
Reproduction of stock Harley hardware used to install stock fenders.
Chr. Cad Parker.Description
974221799680 Springers 1936-48
-
-5162Locks only (parkerized)
Early Fender Tips
Embossed Eagle Type fits 1935-46 fenders—replaces Front
3724-48B, Rear 3724-48A.
4343 Front
4344 Rear
Early Fender Emblems
Sold as pairs, deluxe & OHV types. Nickel plated with stud & nuts
attached to mount to saddle bags, fenders.
2111
Deluxe (11530-46)
2112
O.H.V. (91583-52)
12640 Speed nuts (10 pack) (7613A)
Frames - Fenders - Tanks
We suggest pre-fitting all component parts including engine
and transmission assemblies before painting or final assembly of a frame, fender or tank.
PRESTON CYCLE PRODUCTS INC.
20A-25
Rear Fenders
88003
6005
45 Rigid Rear Fenders
Fully assembled and riveted together with hinge. 88000 and 6005
have relief over skirts to accept stainless fender trim attached
by clips. #88001 and 88007 have 1936-38 rear tail lamp shroud
attached
PCPApplication
6005 45 Solo 1937-46 (59612-41)
88007 45 solo with narrow braces (59612-41)
19368 45 Solo side skirt set (4pcs)
88003 Army 45 Solo 1936-52 (3710-41A)
88103 Fender end 45 1950-52 (59699-49)
Luggage Carrier
Fits 45” rigid frames only. Includes military saddlebag mount
bracket fastened in place. Army finish.
19838
Rear Stand Clip for 45 Models (Black)
Original-style rear stand clip fitting all Big Twins 1936-57. Clip
comes pre-drilled and ready for mounting.
PC # OEM #
Description
19077 49581-36 Rear Stand Clip 45 Solo 1936-52
Parkerized Luggage Carrier Mount Kit
Rear Fender Trim-USA
Stainless steel fender trim set. Fits all 1939-48 all models. Complete with clips.
4505 BT 1939-48 (53900-39)
82033 Side car trim kit 1936-67 (87925-39)
82034 Servi car trim kit 1939-67
Rear Fender Brace Bolt Kit
Chrome Old-Style Luggage Rack
Parkerized OEM 3743-23 bolts, nuts and washers used on 192340 BT.
72460
20A-26
PCPApplication
72347 1926-41 DL, RL, WL, 45’s
72348 1942-on WL, WLA, WLC 45’s
Replica of the early accessory rack, used on all rear fenders 1935
& up. Great for attaching throw-over saddle bags. Does not interfere with Buddy or Police style seats on post.
3215 Rear luggage rack
PRESTON CYCLE PRODUCTS INC.
Colony
Speedo Cable Clamps
Exact duplicate of original Harley clamps.
Item
PCPApplication
A
9646 74 & 80 Sidevalves 1936-38, 61 & 74 OHV 1936-51, parkerized (67075-36)
B
9647 45 Solo 1937-85, Servi-Car 1937-56, parkerized (67074-37)
C
9648 45 Solo 1941-52, parkerized (67076-41)
D
9649 74 & 80 Sidevalves 1939-48, parkerized (67086-39)
Chrome Saddle Bag Mounting Plates
Front Fender Lamp Wire Kit
Steel tube, clamps, nuts, connectors, wire and loom will secure
wire to fender as original. Duplicate of OEM kits, fits all models
1935-47.
9786
Use on rigid frame fenders 1936-57 or can also be bolted to
swing arm struts. Exact stamped, as original. Use saddle bag
mounting ovals to mount stock or custom bags to rigid frames!
4443 Pair
Fender Hardware
Colony Saddle Bag Mount Kit
Cad plated studs, chrome plated acorn nuts to install saddle bag
mounting plates on all models 1934-57.
5203 Kit
Colony Rear Fender Mounting Kit
Reproduction of stock hardware used to mount rear fender.
Chr.Cad Parker.Application
97081793 9707 BT 1936-57
97909791 9792 45 Solo ‘29-52
PRESTON CYCLE PRODUCTS INC.
Colony Utility Saddlebag
Holder Kit
Accurate reproduction of OEM style
fasteners (11724-X) used to hold
saddlebags on 1936-38 BT.
72634
20A-27
Gas Tank
CARB SUPPORT BRACKETS
Exact replica for Linkert carbs
45 Tank Set
Oil and gas tank set fits Solo and Servi car 1936-73. Tanks will
accept cateye dash plate and gas shut off rod kit. Shift gate
mount holes 3 3/8” c/c.
PCPDescription
89060 Tank set
19244 Gas shut-off kit
19169 Chrome cap set
19184 “Oil” cap only
9894 Chrome mount bolt
9895 Cadium mount bolt
9896 Parkerized mount bolt
19084
19085
19086
OEM
1110-33
1110-39
27432-36
Model
SV BT
SV BT
45 Models
#Year
C
1930-38
D
1939-48
E
1936-58
TOP OF TANK SCREW AND WASHER KIT
Duplicate of original Harley hardware used to mount tank to frame
on all Harley 1918-1936, 1936-1952 45’s. Kit includes paper gaskets to avoid paint chipping as original.
5411
Nickle Plated
5412 Cad Plated
45 TANK FILLER STRIP
Replaces OEM# 3502-37B. Use on all 45’s, 1937-73. 19097 Cadmium plated.
Oil Dipstick
Replaces OEM 62631-37 on all 45’s 1937-73.
19286
5567
4409
1941-46 TANK TRIM
Includes 4 stainless strips, 2 (61801-41), 2 (61799-41)
4409 Trim (4 pc.)
5567 Mount Strips (4 pc.)
20A-28
SHIFT GATE for 1940-46 Gas Tanks
Fits 45, 61, 74 and 80” models.
PC#OEM
Description
19090 33785-40 3 Army, c/c 3 1/4
19091 33790-39 3 Chrome
19092 33791-39 3 & R Chrome
19093 33789-37 4 Chrome
5207 33822-36 3 & R Chrome gate screws (3)
PRESTON CYCLE PRODUCTS INC.
Gas Tank
684
Bob Gas Valves
Colony Manifold Nipple
Valves include complete shut off rod and seat assembly for 61”
and 74” models with left tank reserve. Includes spring and sealing
washers.
PCPDescription
684
Gas valve assembly BT 1950-65
19243 As above, w/rubber compresssion 45” 1950-57
19244 As above, w/flared gas line 45” 1941-49
20010 Shut off rod kit 45” 41-49 with viton seal
14071 Seals (10 pack) (62085-40)
19245 Rod hardware kit 1941-65
19246 Shut off rod seat 1941-49 (62075-40)
19247 Shut off rod seat 1950-65 (62075-50)
PCPApplication
9422 45” 1937-73
9423 74-80 SV 1930-48
Gas Tank Mounting Kit
SHIFT GATE for 1947-65 Gas Tanks
Late type for 45 models, fits 1947-65 tanks. 3 1/2” c/c mount
holes
PC#OEM
SPEEDS
19094 33791-47 3 & R BT
19095 33789-47
4 BT
19096 33790-39
3 BT
Includes fasteners used to mount
gas tank on 1937-52 45 Solo and
1937-on Servicar.
9894 Chrome
9895 Cad
9896 Parkerized
Shut Off Rod Knob Kit 1941-65
Knob and seal cap are cad plated. Kit
includes all pieces as shown.
19396
45’s Inlet Pipe Assembly
Replaces OEM #27011-36. Use on all
1936-up 45’s
19054Manifold
5218 2 Nuts Only
692
2 Brass Seals
Colony Gas Tank Shut-Off Rod Upper Kit
Reproduction of upper mounting parts used on all BT 40-65
72702
Gas Tank Shut Off Valve Extension Knob
Allows for easier operation of the shut off valve used on 1940-65
gas tanks.
1801
PRESTON CYCLE PRODUCTS INC.
20A-29
Carb
Shut Off Hardware and Gas Tank Fitting Kit
#PCP
1 1801
2 19248
3 1807
Description
Chrome knob 1940-65 (91690-49)
45” Shut off spacer 1940-65 (62096-40)
Gas tank fitting kit 1940-65 (3 pcs)
45 Mikuni Carb Kit
Includes 34mm Mikuni carb, adaptor flange to fit 1936-52 stock
manifold #27024-36, Anderson style 1” twist grip assembly, air
cleaner and cable. Order carb manifold separately.
PCPItem
21870 Carb kit
19054 Manifold
Linkert Carburetor Fitting
Chrome fitting with O-ring designed to
use 1/4” flexible hose on Linkert carbs.
1732
Linkert Low Speed Needle Valve
Accurate reproduction of OEM 27340-33 needle valve used on all
1933-47 1” carburetors. 3-1/16” Long needle with type 1 (large)
head.
72707
Carburetor Control Coil Clip
Cad plated reproduction of OEM 9959 clip used on 1949-57 45’s.
Also used as timer wire clip on 1961-64 Servi-car.
72552 Pair
Linkert Low Speed Needle Valve
Accurate reproduction of OEM 27340-33 needle valve used on all
1933-47 1” carburetors. 3-1/16” Long needle with type 2 (small)
head.
72708
Manifold Inlet Nipples
Parkerized duplicate of OEM 27045-32 nipples used on 1937-47
61”, 74”, 80” Big Twin, Sidevalves and 1952-56 K, KH.
72636 10 pack
20A-30
PRESTON CYCLE PRODUCTS INC.
Linkert
Intake Manifold Nipple
Threaded steel nipple is exact
duplicate of original Harley
part. Packaged complete
with oversize rivet and heat
resistant “O” ring to prevent
leakage.
All O.H.V. 74’s 1940-54.
1700
Flathead Intake Manifold
Intake Manifold Nuts
Precision machined duplicates of original Harley part. These
manifold nuts are guaranteed to fit and seal properly. Now available for the following Harley Davidson engines:
1940-54 O.H.V. 74’s, 1953-56 K,KH
1688 Chrome Plated
5121 Cad Plated
Cast iron manifolds with brass packing rings and cad plated nuts.
19054 45 WLA 1936-73 (27011-36)
19189 74 & 80 ULH 1937-48 (27012-37)
5218 Chrome manifold nuts 1937-73
692
45 Intake manifold brass seals (pair)
1930-48 74 & 80 Flathead; 1936-39 61 O.H.V.; 1940-46 WLD
5164 Chrome Plated
5160 Cad Plated
1937-73 Harley ‘45’
5218 Chrome Plated
5219 Cad Plated
1-¼” Carburetor Throttle Disc
PartFitment
16083 G 1936-1954, UL 1937-1948, and WL 1937-1942 (27280-24)
16084 +.030 oversize WL 1929-1952 (27280-24A)
Intake Manifold Seals
Precision machined brass seals are duplicates of the original Harley part. Available for the following Harley Davidson engines:
1689 1940-54 O.H.V. 61/74’s, 1953-56 K,KH
692
Harley ‘45’s
5159 1930-48 All Sidevalves except ‘45’s, also 1936-39 61 Knuckle
Carb Throttle Shafts
Linkert Carb Float
Lever
19225 27381-50
PCPDescription
19580 Throttle shaft and bushing kit 45 1936-on
19581 1-1/4” Throttle shaft BT 1942-48 (27275-24)
19582 1” Throttle shaft Linkert 45 1936-54 (27275-26)
19583 1-1/4” Throttle shaft kit 1-1/4”
19584 1-1/2” Throttle shaft BT 1940-65 (27276-40)
19585 1-1/2” Throttle shaft and bushing kit 1940-on
PRESTON CYCLE PRODUCTS INC.
20A-31
Linkert
Replica Linket Carb
Completely assembled with all internals.
PCP
Type Year
Model
41041 BT SV 1937-48 M51
41043 BT OHV 1941-65 M74
41045
41050
Linkert Overhaul Kit
Linkert Complete Carb Hardware Assembly Kit
Includes all parts except body.
PCPSizeModel
41044 1-½”
M74B FL 1948-65
41045 1-¼”
M88 U-UL 36-48, WL/A 1937-52
Includes needle and seat, float, bushings, springs, float pin, gaskets and hardware for 1933-65 models..
PCPItem
41047 Complete kit with nitryl float
41049 Complete kit with brass float
41050 Kit without float
19109
19109 Brass float only
Replica Linkert Carburetor Float Lever
Fits FL 1941-1965 and replaces 27381-50. Sold each.
16122
Reproduction Linkert Carb Parts
PCP
OEM Item
19109 27380-33Float
19110 27260-49 Arm &
27265-49Bracket
19111 27225-48 Choke
19112 27363-41 Venturi
20A-32
Model
All
Big Twin
Type
Brass
49-65
Big Twin
Big Twin
M-74B
M-74B
PRESTON CYCLE PRODUCTS INC.
Gas Line
Steel Gas Lines
Fit tank to carburetor, tin or chrome finish.
PCPOEM Description
19492 3606-32 VL 1930-36
19493 3607-37A WL 1937-38
19494 3607-41M WL, GE 1942-49
19495 As above, chrome
19496 62354-50 WL 1950-65, GE 1953-65
19497 As above, chrome
19498 3607-37 UL 1937-38
19499 3608-39 UL 1939
19500 3608-40 UL 1940-41
PCPOEM
19501 3608-42
19502 3607-36
19503 3607-39
19504 3607-40
19505 3607-41A
19506 19509 62355-52
Description
UL 1942-48
OHV 1936-38
OHV 1939
OHV 1940-41
OHV 1942-49
As above, chrome
K model 1952-56
Crossover Fit Tank to Tank
Tin finish unless noted.
PCPOEM
Description
19484 62355-40 BT OHV 1940-47
3608-40A
19485 As above, chrome
19486 62355-48 OHV 1948
19487 62355-48A OHV 1949-56
3606-48A
19490 62355-52 K model 1952-56
19491 As above, chrome
12601 62361-50 Gas line nut, cad (each)
14099 62360-50 Gas line rubber sleeve 50-65 (10 pk)
PRESTON CYCLE PRODUCTS INC.
20A-33
Speedo/Dash
0-120 MPH Replica Domed Speedometers
Features domed glass lens with stainless narrow bezel in 2:1
ratio with a 5/8” male cable fitting. Includes reset knob.
PCPApplication
48444 (A) 1936-39
48445 (B) 1940-45
48446 (C) 1946-47
Cateye Dash Kits
Can be mounted on all 74”-80” Big Twins 1936-1983, and 45
models 1936-1953, 1936-73 Servi-Car models.
6306 1:1
6307 2:1
Speedo Drive Units
OEM replacement unit includes housing and gear for transmission drive.
PCPApplication
4631 1936-61 BT 11T (67130-36)
3888 Gear and shaft only 1936-61 BT 11T (67135-36)
2329 1937-52 45 Solo 8T(67129-39B)
19064 Retainer for above #2329
16513 1938-61 45 Servi 8T (67131-38)
16516 1962-73 45 Servi 13T (67131-62)
Speedo Cable Clamps
Exact duplicate of original Harley clamps.
Item
PCP
Application
Finish
OEM
A
9646
74 OHV 36-51
Parkerized
67075-36
B
9650
OHV BT 52-56
Parkerized
67075-52
C
9651
OHV BT 57-61
Parkerized
67074-57
D
9652
OHV BT 61-80
Zinc
67074-57A
Preston Cables
Black
FL Models
4201 45” Models
4195 4197
Description
FL’s (Male end) 41-61 (67026-36A)
1937-52 45” Solo (Male Head) (67025-37)
1962-73 45” Servi-Car (67028-62)
Thick Style Early Cables
Cables feature a zinc plated, .42” thick outer housing for early FL
trans drive and 45” rear wheel drive.
ZincOEM
Application
47408 67026-36A
BT 1936-61
47412 62025-37
45” 1937-52
47413
1937-73 45” Solo with late type 1962-on Speedo head
20A-34
SPEEDOMETER RATIO GUIDE
TRANSMISSION DRIVE FRONT WHEEL
FL 1941-E61 11 Tooth 2-1 Ratio FX 1973-79 & 81 On 2-1 Ratio
FL L1961
13 Tooth 2-1 Ratio FX 1980
1:1
RatioALL 45’s with rear wheel drive are 2:1 Ratio
PRESTON CYCLE PRODUCTS INC.
Oil Lines
Chrome Nipple Nut & Tube End
Will attach to tapered tank 63533-15 type fittings and will accept braided or rubber hose.
PCPDescription
19372 Nut (3 pack)
19374 90 Elbow w/nut (3 pk)
19375 45 Elbow w/nut (3 pk)
Oil Lines XLH & K
Lines are cadmium plated and include nuts and seals.
PCPDescription
10573 Return line nut (pair) (63527-50)
14097 Return line seal (5 pack) (63529-50)
14099 Vent line seal (10 pack) (62360-50)
Inner Primary Drain Tube
For sheet metal early Big Twin primary
tube and nut.
PCPApplication
19376 1937-58 Rigid (60546-36)
19377 1959-64 SA (60546-59)
19378 Fitting for cover (60548-36)
Flathead 74 & 80 Oil Line Sets
VLs are cad 2 piece sets and UL, ULH are 3 piece sets.
PCPDescription
19400 Set VL 1930-33
19401 Set VL 1934-36
19402 Set UL, ULH 1938-48
19403 As above, chrome
19404 Feed line UL 1937
19405 Feed line UL 1938-48
19406 Vent line UL 1937
19407 Vent line UL 1938-48
19408 Return line UL 1937
19409 Return line UL 1938-48
Oil Line Fitting Kit
These oil line fitting kits include 4 cadmium plated fittings for use
on OEM frames when an external oil filter is used. Fittings will
work with the aluminium cover oil pump only.
4653 Rigid frame 1936-57
4654 Swingarm frame 1958-64
45 Flathead and Servicar Oil Lines 1938-73
Cad ChromeDescription
1941019414 3 piece set
1941119415 Feed line (63510-37)
1941219416 Vent line (63570-37)
1941319417 Return line (63507-38)
19436
-
Vent nipple (25235-36) (also OHV 36-41)
19437
-
Black rear chain oiler (63590-41)
19438
-
Banjo bolt (63573-36)
14007
-
Brass washer (6440) (5 pack)
PRESTON CYCLE PRODUCTS INC.
20A-35
Oil Lines
Original-Style Oil Pump Fittings for Harley
Oil Canister Rebuild Kit
Includes all small parts and gaskets for rebuilding.
25606
Original-style fittings for Harley Big Twins. Also used with some
custom oil tanks to convert nipples so stainless-steel braided
lines can be used.
4657 Set of 3 for nylon and braided hose
1722 Chrome set of 3 fits steel and braided fixed-end lines
5119
Cad plated as above 1936-64
Knucklehead Rocker Box Oil Line Fitting
One kit contains 2 rocker box and 1 motor case fitting, chrome
plated.
1741
Oil Line Straight Tube With Nut 1936-64
19373 3 Pack
105711056810574 10592 10569
Cad Big Twin Pump and Filter Fittings
Banjo Bolts and Washers
PCPApplication
19438 Vent bolt (63573-36) (each)
14007 Vent bolt washer (6440) (5 pack)
19436 Vent nipple 45 1938-73, cadmium (25235-36) (ea)
19379 Feed & return bolt (3570-36A) (each)
19380 Feed & return bolt washer (3570-36B) (10 pack)
20A-36
PCPOEM
10574 63533-15
10592 26424-50
10571 63526-50
10569 63525-50
10568 63524-50
10573 63527-50
10591 63871-50
Application
1915-64 Oil pump cover to line (ea)
1950-64 Oil pump cover to line (ea)
1958-64 Oil pump cov - filter line (pr)
1940-64 Oil filter line connector (pr)
1951-64 Oil filter line connector (ea)
1950-64 Oil filter line nut (pr)
1941-64 Oil filter cap adapter (ea)
PRESTON CYCLE PRODUCTS INC.
Primary
45 Inner Primary for Solo or Trike
Fits 1937-63 Solo and Servi-Car. Black finish.
3396
45 Outer Primary
Front Chain Guard Inner Primary Cover
Mounting Kit
Reproduction of OEM 60648-39 screw plugs and OEM 60650-32
washers used on all 1939-73 45’s and Servi-car.
72521
Available original or with accessible clutch area for 1937-63 Solo
and Servi-Car. Both may be cut out for electric start.
PCPOEM Description
911
60557-36 Chrome derby cover
25158
60565-36 Derby cork gasket (5 pk)
871
60572-36 Chrome inspection cover
79426
60567-36 Inspection cork gasket (10 pack)
19837
Chrome 45 outer primary
19825
45 Custom outer primary (raw)
19830
45 Custom outer primary (black)
19835
45 Custom outer primary (chrome)
Chrome Rigid Chain Guards
PCPModel
5529 45 Solo 1936-52 (60303-36)
5530 45 Solo, raw (60303-36)
82020 As above black powder
Inner/Outer Primary Cover Mounting Kit
This complete mounting kit contains reproductions of the original
Harley hardware used to mount the inner and outer primary covers on VL Harleys and 45’s 1930-on.
5294
Rear Chain Guard Mount Kits for 45”
Kit includes bolt, nut, spring, cotter pin and washers.
PCPDescription
9744 Solo 45” 1936-52 and Servi to 1973 chrome
9745 As above, cadmium
9746 As above, parkerized
Inner Primary Chain Guard Mounting Kit
Complete mounting kit contains the following: 3813-29 bolts,
3815-29 cupped washers, 3814-29 springs, 0215 washers, 0108
nuts, 0290 cotter prins. Fits 1929-40 45’s and 1929-34 Singles.
Parkerized
72283
PRESTON CYCLE PRODUCTS INC.
20A-37
1936-66 Wire Wheels
Star Hub Parts
PC#OEM#
12511 43546-36B
21307 43549-36
3 2338 43556-36
4 13581 43560-35 5646 43566-35
62512 43564-35
72340
81166
1719
92513
2514
2515
2516
2517
2518
9220
9221
9222
9223
9224
9225
Description
Chrome Hub 1936-66 complete
Rear Wheel Bearing Hub Sleeve
1936-66
Thrust Bearing Sleeve 1941-66
Wheel Adjusting Shims 1941-66
10 Pack
Chrome Star Wheel Cover 1937-66
Wheel Hub Dust Shield 1936-66
Wheel Gasket Kit 1941-66
Chrome Star Wheel Screws for wheel
1936-66
Chrome Star Wheel Acorn Screws &
Nuts for 1 wheel 1936-66
Right Rollers STD.
Set of 12
Right Rollers +.0002 Set of 12
Right Rollers +.0004 Set of 12
Right Rollers +.0006 Set of 12
Right Rollers +.0008 Set of 12
Right Rollers +.001
Set of 12
74 Wheel Hub & Parts 1936-66
1010729 24721-30 113300 43574-35
123301 43563-35
133302 43558-39
14 3303 43552-39
1511087 43554-35
162346 43561-39
17 10732 43578-35 182519 9220
2520 9221
2521 9222
2522 9223
2523 9224
2524 9225
19 10511 9851
Right Side Roller Retainer 1941-66
Inner Wheel Hub Cover 1936-66
Thrust Washer 1941-66
Brake Side Washer 1936-66 (5 pk)
Wheel Spacer 1936-66
Wheel Thrust washer lock ring
1937-66 (10 pack)
Bearing Collar
Brake Side Roller Retainer 1941-66
Left Rollers STD Set of 14
Left Rollers +.0002 Set of 14
Left Rollers +.0004 Set of 14
Left Rollers +.0006 Set of 14
Left Rollers +.0008 Set of 14
Left Rollers +.001 Set of 14
Grease Fitting (10 pk)
Star Hub Wheel Assembly 1936-66
Wheel fits front and rear BT 1936-66. Stock replica wheel hub
comes with loose type roller bearings and replaces 43540-36.
Comes with chrome or stainless steel spokes.
ChromeS.S.
Diam./Width Description
707557075616” x 3.00”
Chrome hub and rim
707577075816” x 3.00”
Black hub, chrome rim
70759
16” x 3.00”
Black hub and black rim
707787077918” x 2.15”
Chrome hub and rim
707807078118” x 2.15”
Black hub, chrome rim
70789
18” x 2.15”
Black hub and rim
45 Solo Front Wheel Assemblies
Includes rim, replica original finish hub and bearings, laced with
stainless steel spokes.
PCPSizeRim
70980 16"Chrome
70981 16" Black
70982 18" Black
70983 18"Chrome
Rear Axle Adjuster Kit BT 1930-36
72069 With cad bolts (5 pc)
20A-38
PRESTON CYCLE PRODUCTS INC.
1936-66 Wire Wheels
16" OEM Factory Style Drop Center Rims "A"
18" Steel Wheel Rim
PCPOEM
70736 43002-30B
70737 43003-30C
70738 43004-30B
Description
45 Front, black
45 Front, chrome
All rear, black
Brake Drum Wheel Mounting Socket Screws Colony
reproduction of OEM 4026-35S bolts. Hardened and parkerized
oversized bolts for use on all models 1938-72. 7/16-20 thread.
72466
16" Original drop centre rim design with deep indent for safety
beads. Chrome rims have 40 spoke holes.
PCP
WidthFinish
Description
6280 3.0 Chrome
As OEM w/large hole
70735 3.0
Black powdercoat As OEM w/large hole
70752 3.0 Chrome
As OEM w/small hole
70753 4.0 Chrome
As OEM w/large hole
Black Steel Rims
Replica black powder coat rim with conventional bead construction. Measures 18" x 3.15" and 2.0" bead width. Fits front or rear
BT and rear only 45's. Fits rear WL 1930-52 and VL 1930-36. Fits
front or rear EL 1936-40, UL 1938-47 and FL 1941-44.
70766
Wheel Lug Bolts for Brake Drums
Front Wheel Stabilizer Collar Stud Kit
PCPOEM
19226 43530-35A
19227 43530-35A
19239 43531-35
Description
Black BT 1936-72
As above, chromed
Chrome BT oversize
Reproduction of OEM 44350-30 studs, nuts, and lockwashers
used on 1930-52 45 Solo and 1932-40 Servi-Car.
72599
PRESTON CYCLE PRODUCTS INC.
20A-39
45 Springer Front Brake
45 Front Axle and Brake Hardware 1930-52
PCPOEM
Description
19012 7811
Axle nuts, chrome
19013 As above, cadmium
15700 8860
Balls (50 pk)
10511 9851
Grease fitting (10 pk)
10513 9852
90 degree grease fitting (5 pk)
16247 9968
Early frame mount cable clamp
16521 9974
Lower cable to fork clamp
16204 9980
Front brake cable clamp
11109 43630-30 Retaining ring (5 pk)
16587 43632-44 Cone seal 45 front wheel (5 pk)
16588 43635-30 Lockwasher 45 front wheel
16589 Cone nut for sleeve 45 front wheel 30-52
16590 43640-30 Left inner dirt guard
19028 43871-30Axle
9302 43885-30 Nut and oil seal w/retainer, chrome
9303 As above, cadmium
9743 As above, parkerized
19458 44145-41 Backing plate 1941-52
18630 44180-30 Backing plate bushing
19125 44223-28 Springer fork brake bushing (pr)
19123 44226-36 Stud, lock tab, nut
44229-40
44231-38
19364 44226-36 Stud only
2321 Shackle rebuild kit
19459 44244-40 Shackle bar, black
20A-40
PCPOEM
19460 44265-31
12006 44270-36
19205 44307-31
19210 19461 44350-30
19339 44405-31
44406-31
19332 44427-35
19462 44450-35
72441 44450-35
19463 44476-35
13217 44486-28
50207 45002-41
50208 45002-41C
19033 45085-30
19456 19190 19457 45153-28
8624 45162-41
9739 9630 19464 9683 9740 16248 45172-28
19034 45177-29B
Description
Brake cam
Brake cam washer 1936-48
Front brake operating arm 41-52 45”
45 Front brake plate cover kit
45 Front wheel cover plate stud (pr)
Shoe set
Brake lining only
Brake shoe pivot stud
Brake stud kit (parkerized) 1935-51
Locking plate
Spring set
Lever assembly, polished
As above, chrome
Brake cable inner/outer 1941-57
Brake cable outer 1928-40
Brake cable inner/outer kit 1930-57
Inner cable only
Cable adjuster 1941-57
As above, chrome
As above, parkerized
Cable adjuster 1928-40 cadmium
As above, parkerized
As above, chrome
Lower cable clamp, black
Cable connector clamp
PRESTON CYCLE PRODUCTS INC.
BT Springer Front Brake
Big Twin Spring Fork Brake Parts 1936-48
PCPOEM
10131 490
10201 534
20518 6590
5198 20104 7923
20105 16247 9968
16204 9980
13511 41691-31
19044 43872-36
3675 43872-36
19000 43882-36
19001 43884-36
19192 554
43886-30
19802 44113-36
19803 44113-36C
19455 44146-41
19224 18638 44180-36
5287 44183-36
4694 44475-35
19121 44210-40
19122 2321 19125 44223-28
19364 44226-36
Description
Pin (5 pk)
Cotter pin
Washer (10 pk)
Cad nut kit (4 pcs)
Chrome nut
As above, cad
Cable to fork top clamp
Front brake cable clamp
Copper cam shim (5 pack)
Black front axle kit
Chrome front axle
Front axle sleeve
Chrome spacer
As above, parkerized
Chrome nut kit (3 pc)
Black brake drum
As above, chrome
Black backing plate
As above, chrome
Bushing for back plate BT
Grease seal kit
Lock plate
Black shackle bar BT 1940-48
As above, chrome
Shackle rebuild kit
Shackle bushing (pr)
Stud only from above
Brake Cable Assembly 45” and BT 1930-57
19190 (45085-30)
PCPOEM
19223 44265-36
12006 44270-36
19032 44308-36
19399 19340 44402-36
3970 44433-39
19222 44449-36
13216 44484-35
50207 45002-41
50208 45002-41C
19033 45085-30
19456 19190 19556 45102-39
19457 45153-28
8624 45162-41
9739 9630 19464 9683 9740 19034 45177-29B
16248 45172-28
90102 90103 Description
Brake cam BT
Shaft washer
Operating arm BT 36-48, parkerized
As above, chrome
Shoe set complete BT
Linings only BT
Stud and lock plate
Shoe springs (pr)
Lever assembly, polished
As above, chrome
Brake cable inner/outer 1941-47
Brake cable outer 1928-40
Brake cable inner/outer kit
Oil cup kit, zinc
Inner cable only
Cable adjuster 1941-57
As above, chrome
As above, parkerized
Cable adjuster 1928-40 cadmium
As above, parkerized
As above, chrome
Lower cable clamp
As above, chrome
Chrome BT brake kit
As above, black
BT Springer Axle Kit 1936-48
43322 Chrome
43323 Parkerized
PRESTON CYCLE PRODUCTS INC.
20A-41
Brake Drum
45 Rear Brake Drum
Unit includes drum with sprocket and splash ring riveted on. Replaces 41401-41, on 1941-52 solo.
19832 Drum complete, black
19833 as above chromed
2352 Sprocket only 41T
Solo Rear Black Backing Plate Assembly 41-52
Includes completely assembled backing plate, arm, shoes,
springs, speedometer drive and cam.
19861
Foot Brake Lever Stud
Fits BT 1937-57 and 45 1939-73.
72316 Stock
72310 O/S to 23/32 (needs reaming)
45 Rear Brake Parts
For 1941-52 Solo models.
PCPOEM Description
19511 4054-35
Rear cam
82065 4065-35
Parkerized, rear rod
19832 41401-41 Black complete drum
19833 As above, chrome
2352 41474-35 Sprocket kit with ring
19510 41652-37 Black backing plate
13583 41692-36 Brake cam shim
19335 41806-41 Complete shoe set
3968 41849-41 Linings, pair
10912 41876-41 Pivot stud
19513 41925-41 Rear arm
19514 As above, chrome
19515 42330-39 Parkerized front rod
19512 42566-35 Black bell crank
19463 44476-35 Lock plate
13217 44486-28 Spring set
72326 Parkerized Brake arm anchor stud kit 1935-52
Colony Rear Brake
Shoe Pivot Stud &
Cup
Parkerized reproduction of
original Harley fasteners
used on 1938-57 BT.
72720
Foot Brake Lever Stud
Fits BT Knuckle 1936-38
72315 Stock
72309 O/S to 23/32 (needs reaming)
Mechanical Brake Rods
Chr. Parker.Application
21619516Front 74 & 80 1937-57 (42326-37)
21882067Rear 74 & 80 1936-57 (42257-36)
1952719515 Front 45 Solo 1939-52 (4073-39)
8206682065 Rear 45 Solo 1935-52 (4065-35)
19524
Front VL 1930-35 (4063-30)
82064
Rear VL 1930-35 (4065-30)
Clevis
21719525Front all models short (42333-30)
21919526Rear all models long (42273-30)
1010510108 Pin (42269-30) (5 pk)
20A-42
74018
Mechanical Backing Plate Kit BT 1936-57
Includes plate, springs, shoes, cam pivot stud and plate. Arm not
included.
PCPFinish
74013 Chrome
74018 Black
PRESTON CYCLE PRODUCTS INC.
Brake Hardware
Rear Chain Adjusters
Quality reproduction rear axle kit contains
sleeve nut, collar, axle nut, and lockwasher. Fits 1936-52 45 Solo.
19008 Chrome Plated
19009 Cad Plated
Adjusters are heat treated, plated and sold
in pairs with plated lock nuts assembled to
insure properly fitting threads.
PCPDescription
5165 Cad BT 1936-72
1796 Chrome BT 1936-72
1632 Chrome Solo 45” 1930-52
5246 Cad Solo 45” 1930-52
Servi-Car Rear Sprocket
Front Axle Nut Kit
Rear Axle Nut and Lock Kit
Front Brake Control Wire Lower
Connection Kit
Parkerized lower connection assembly
used on 1928-50 45’s and 1928-48 Big
Twins.
72593
Replaces OEM 82860-32. Use on all
1932-73 Servi-Car. 37 Tooth type.
3763
Machined axle nuts just like Harley did it.
Kit contains 2 axle nuts and 2 cotter pins
for the following:
19010 1926-34 Singles,chrome
1929-36 45 Solo, chrome
19011 1926-34 Singles, cad
1929-36 45 Solo, cad
19012 1937-52 45 Solo, chrome
19013 1937-52 45 Solo, cad
3971
Mechanical Brake Kit 1936-57
For use on mechanical brake frames with a cross shaft tube only.
Can be used for restoration or for forward controls on a rigid
frame.
PCPFinish
19844Chrome
19845 Parkerized
Colony Rear Brake Rod
Clevis Pin Kit
Parkerized reproduction of OEM
41692-36 wave washers and
other fasteners to mount rear
brake rods. Fits 1935-52 45’s.
72502 Kit
72537 Pins only (5 pack)
HD 45 Servi Car Wheel Brake Cylinder
PC #
2330
OEM #
Fits
33460-511951-on
Servi-Car Master Cylinder
Stock replacement master cylinders. Complete and ready to
install. Harley 45” Servi-Car 1951-73.
19099
3971 Complete kit (83500-51)
19099 Rebuild kit (83502-51)
45 Solo Speedo Gear Unit
Complete unit use on 1937-52 solo includes gear & drive shaft.
Replaces 11138-37
PCPOEM
ITEM
232967129-37BDrive
1906467080-37 Retainer
PRESTON CYCLE PRODUCTS INC.
20A-43
Brake Shoes
240
19336
Brake Shoe Springs
Brake Shoe Sets
Sets are complete with linings installed and are sold in pairs.
Rear, Mechanical
PCPOEM
Application
240
41805-38 Rigid 74” 1938-57
19334* 41805-33 Rigid 74” 1938-57
19335 41806-41 45” Solo 1941-52
Rear, Hydraulic
PCPOEM
19336 83350-51
Application
Servi-G 1951-73
Front, Springer
PCPOEM
Application
19339* 44405-35 45” Solo 1931-52
19340 44402-36 61, 71, 80” 1936-47, Servi-G 1941-57
*Note: OEM cast construction
Front (pair)
PCPOEM
13216 44484-35
13217 44486-28
Rear (pair)
PCPOEM
13205 41835-30
13217 44486-28
13239 88375-51
88373-51
13216 44484-35
Application
Springer 74 & 80 36-57, FL Glide
1948-68
45” Solo 1929-52
Application
74 & 80 Mechnical 1936-57
45” Solo 1935-52
Servi -Car 1951-73
Servi-Car 1938-48
Wheel Cylinders
PCPApplication
Rebuild Kits
19630 1958-on Sidecar (87752-58A)
Springer front Brake
Shoes 1931-52
19339
3968
19333
Brake Linings with Rivets
PCP OEM WidthApplication
2047 41848-38 1.5”
Rear BT 1938-57, 6 hole
3970 44433-39 1”
Front BT Springer type forks,
5 hole
19332 44427-35 1”
Front 45” 1935-52, 6 hole
3968 41849-41 1-3/8” Rear 45” Solo 1941-46, 7 hole
19333 83355-51 2”
Rear Servi car 1951-73, 10 hole
20A-44
Spring Fork Front Brake Kit
Kit includes: cable, cable end, shackle adjuster, backing plate,
brake shoes, springs, drum, lug arm, cam, pivot stud and grease
seal. Available in black and chrome finish. Brake handle and axle
kit must be ordered separately. Fits 1936-47 spring forks with
offset BT rockers and a star hub wheel. Order hub and handle
separately.
PCPDescription
90102 Chrome kit
90103 Black kit
43322 Axle kit
Early Left Side Levers
50207 Polished (45002-41)
50208 Chrome (45002-41C)
PRESTON CYCLE PRODUCTS INC.