Section 20A CLASSIC AND ANTIQUE 1929-on

Transcription

Section 20A
CLASSIC AND ANTIQUE 1929-on
Everything Except Motor and Trans
45-UL-Knuckle-Panhead-Pan/Shovel
Preston Cycle’s 1939 UH
Brake ................................. 40, 42 to 48
Electrical ......................................... 2-6
Exhaust ........................................... 7-8
Fenders ....................................... 22-26
Wire Clips
PCPModel
Application
72449 45’s
Rear frame (9976)
72450 1936-69 BT
Front frame leg (9979)
72489 1961-84 BT
Frame head tube (10012)
72490 1930-49 45
Seat post tube, frame tube and 1936-49 BT
frame head (4730-30A)
72491 1930-48 BT
Brake light, battery wire (4727-30)
72492 1923-33 All
Taillight (4727-23)
72504 1940-57 45
Horn wire (4703-38A)
1940-57 Servi
1938-48 BT
72505 1936-64 74OHV Front spark plug cable (4726-36)
72520 1938-65 BT
Timer wire (4726-37)
72547 L1945-E47 BT Type I, frame head tube (bull neck) (1977)
72545 L1947-49 BT
Type II, Frame head tube (9977)
72546 1950-60 BT
Type III, Frame head tube (9977)
72586 1949-64 BT Timer cable clamp (9957)
72587 1936-48 BT
Timer cable clamp (4726-36A)
Frame Related ............................ 19-21
Gas Tank/Carb ............................ 27-35
Handlebar ........................ 13-14, 17-18
Oil Lines ...................................... 37-39
Primary ............................................. 40
Springer ........................................ 9-18
Wheel ............................................... 41
PRESTON CYCLE PRODUCTS INC.
20A-1
Electrical
Replacement Battery Box for 45-Made in USA
Glass Lenses
For show use only on antique applications, not D.O.T. approved.
PCPOEM Description
19229 5065-25
Rear, clear 1915-33
19230 68092-25 Rear, clear 1935-38
19231 68094-39 Rear, clear 1939-46
19232 68090-39 Rear, red 1939-46
19233 68090-47 Rear, red 1947-54
19234 68093-47 Rear, clear 1947-54
19235 68090-55 Rear, red 1955-68
19236 68455-35 Taillamp, frosted 1935-66
19237 Moto-Lamp head lamp, clear 1935-47
19238 67731-35 Head lamp, clear 1935-47 (USA)
56117 67731-35 Head lamp, clear 1935-47 (imported)
19241 68660-38 Spot lamp, clear 1938-62
For solo or trikes, top is included, order mount plate separately, #19816 & #19817 include raw box with top.
PC#OEM# YearsModel
19816
66202-29 1929-52 (A) Solo (raw)
19817
66203-40A 1940-63 (B) Servicar (raw)
19113
66377-29 Top Only Raw
19114
66377-29 Top Only Chromed
19115
66302-29 1929-53 (C) Mount plate, ea.
19116
49180-36 1929-53 (D) Mount stud, pair
Brake Light Switches
PCPApplication
19528 VL 1930-36 (5081-34)
Colony 45 Circit Breaker Screw Kit 1937-73
9415
Cad
XLH Coil Mount Studs 1955-67
Sold in pairs to replace 64611-55 and 64612-55.
10897
BT Generator Screw Kit 1950-54
PCPFinish
72097
Chrome
72098
Cad
20A-2
Chrome Rear Stop Light Switches
We offer a full line of chromed mechanical stop light switches.
These switches feature steel construction, support plates and
chrome plating. Ideal for replacing worn-out stock parts or
when building a ground-up project.
PCPFits
2177 BT models 1937-67, 45” WL models 1937-57 and Servicars from 1937-50 pull-on style (72003-34T)
17202 Sportster® and K models 1952-66 push-off style (72004-52)
Pull Springs for Above Switches (sold in 5 packs)
13200 1936-57 BT Black (72017-39)
Electrical
19322
Early Horns
19323
19360 6 V Horn (no wings)
2174 12V Horn (no wings)
19047 Bracket Only (69003-42)
Horn Mounts
PCPDescription
19322 VL horn mount kit 1931-36 (42 pieces)
19323 Horn mount kit all models except VL 1936-41
19324 Horn mount kit 1946-48
19326 Horn mount kit 1949-54
19327 Horn mount rubber 1936-41
19328 Lower horn bracket 1936-45
Early Horns with Design
C
Features chrome grill with wings and includes mounting
bracket.
19358 6 Volt with bracket
19047 Bracket only (69003-42)
B
A
Horn Brackets
PCPOEM
19045 69130-36
19058 69120-36
19046 69120-45
19047 69003-42
Years
(A) Upper 1936-40
(B) Lower 1936-45
(B) Lower 1945-57
(C) Rear strap (all)
Horn Terminal Plate
Replaces 69037-42, on all Springer forks,
neoprene.
19048
Headlamp & Horn Bracket Insulator Terminal
Kit
Colony kit includes insulators, fender lamp wires, steel and
brass hardware for headlamp bracket to fender light on BT
1945-48 and Servi-car 1945-57.
72096
Horn Bracket Bolt and
Insulator Kit
Replaces 69135-47 and 6210
and includes hardware.
19640
20A-3
Electrical
Oil Tank, Battery & Fender Accessories
PC #
17009
2235
849
850
OEM #
66390-58, 66393-58
66373-36
62575-36
62585-36
Description (chrome)
Tall 6-volt hold-down rods
Battery top plate
Battery bottom plate
Battery plate bracket
12V Custom Battery
Custom size battery is ideal when converting to a 12-volt
system. 3-19/32” wide x 4-1/16” long x 4-1/2” high. Rated at
5-1/2 amp hours.
6875 37-64 FL w/12-Volt conversion or horseshoe oil tank
6V Batteries to Fit FL and FLH Models
PC Description
6878 H-2 type fits BT 1941-1964 (4” x 4-1/2” x 8-1/2”H) (66006-29D)
6889 T/L as above
6 Volt Battery
6 Volt Battery Hardware
Fits BT 1936-64
PCPOEM Application
19287
66373-36
Top cover, black
2235
66373-36
Top cover, chrome
19288
66390-36
Rod set with flags and pads
66393-36
1936-57 (zinc)
19289
66390-58
Rod set with flags and pads
66393-581958-64
12595
66387-26
Wing nuts 1929-64 (pair)
5445
66100-15
Pad set (2 pack)
PCPDescription
6897 H-1 Style for 1929-36 VL and J’s 4” x 6.5” x 6.5” high
6898 1932-53 Indian for most models (must reverse
for four’s) 4” x 6 1/2” x 7 1/4” high ID-I
Battery Terminal Kit
These faithfully reproduced
battery terminal fasteners
and felt washers will add a
look of authenticity to any
restoration. Fits all 6 volt
Harley Davidson 1923-65.
5122
20A-4
Battery Flags and Hold Down Straps
PCPOEM
19288 66390-36
19289 66390-58
66393-58
Application
Fits horseshoe oil tank with 6 Volt 66393-36 battery 1936-57. Parkerized
Fits as above, 1958-64
Electrical
Indian Complete Wiring Harness Kit
Complete harness kits with Cotton braided wire and asphalt
loom for 1940-53 Indians.
PCP#Description
28653
Chief 1944-47
28654
Chief 1948-53
Frame Electrical Terminal Screws and Fittings
Duplicate of OEM Kit# 1523-26A. Contains insulators, screws
and nuts os original. Fits 1936-1947 Big Twins and 45’s.
8942
Front Fender Lamp
Wire Kit
Steel tube, clamps, nuts,
connectors, wire and loom
will secure wire to fender
as original. Duplicate of
OEM H-D kit fits 1935-47
all models. Instruction
included.
9786
Generator Relay (Solid State)
3-post replacement generator relay for Big Twins and allows
use of “idiot light”. Replaces OEM 74750-38. Used on all 3
brush generators 1938-57.
28103 Relay with chrome cover
Solid State Relay Eliminator
Replaces mechanical regulator on 3 brush generators 193757. No sticking relays and moving parts to wear out.
28100 Relay eliminator 1937-57
Miscellaneous Antique Hardware
PCPDescription
19530 VL Ignition key 1926-36 (4521-36) (each)
19533 Timer wire clip 1938-65 (9971) (each)
19536 Throttle and spark coil spool 18-48 (3332-36) (ea)
19538 Clutch brake cable ferrule 1950-52 (each)
19539 Timer cable clamp 1936-48 (each)
19540 Timer cable clamp 1949-64 (9957) (each)
19541 Timer cable clamp 1937-46 (56626-37) (each)
19542 Timer cable clamp 1946-64 (each)
19543 Timer cable clamp strap 47-53 (56628-47) (each)
19545 Throttle cable clamp 1952-65 (56609-52) (each)
19546 Front brake cable clamp 1928-48 (4160-28) (each)
Plug Wire Holder Bracket
19633 1937-63 45 SV (32000-37)
3998 1966-on FL, 74 OHV Rear (32000-37A) chrome
DISTRIBUTOR BAND
Replaces 32710-36 on all 37-47 models, complete as illustrated.
PCPOEM
19018 32710-36 Band kit
19019 32732-37 Control bracket
19392 32735-37 Bracket 74 & 80 SV
19552 74765-36 Relay mount BT 36-46, OHV
19553 74765-47 Relay mount BT 1947-64, OHV
19554 32666-30 Plate spring washer (5 pack)
19544 56628-54 Spark cable bracket 1954-64
19539 56625-36Clamp
19533 9971
Wire clamp
19454 56626-37 Timer cable to frame clamp 1937-46
20A-5
Electrical
Early Distributors 1936-47
2 Bolt manual advance style
distributor features natural alloy
finished base with shaft and gear
installed, stainless advance band,
chrome top and clip, base retainer
and points wire. Top housing also
includes early point with spring set
condensor.
PCPApplication
19366 45 1936-47
19367 BT 1936-47
4047 Chrome cap
V-Twin Replica Coils
Steel jacketed coils include nuts, packing and wires.
1930-47 BT and 45 Models (31602-30)
19362 6V Black
19559 6V Chrome
19560 12V Black
19561 12V Chrome
Distributor Bracket 74 & 80 SV
1948-60(37604-48)
19563 6V Black
5079 6V Chrome
19562 12V Black
5078 12V Chrome
19392 32735-37
19384
19277
Chrome Tear Drop Coil
Covers
Fits early 6 volt 1948-60
models.
45461
Distributor Top Rebuild
Includes points, condensor, wire, washers, bushings, studs,
and hardware.
PCPDescription
19277 1936-47 Complete kit
19384 1948-60 Complete kit
19636 1937-47 Base only
19257 1948-60 Bsase only
Colony Housing to Frame
Clamp Bolt Kit
Kit includes parkerized bolts
(83001-32) nuts and lockwashers
to mont housing to frame. Kits fits
1 clamp only. 2 Kits are required
for both clamps.
72092 Servi-car 1932-41
72093 Servi-car 1942-73
CIRCUIT BREAKER POST REBUILD KIT
This item is an accurate reproduction of a repair kit offered by
Harley in the 1940’s and 50’s to repair damaged and broken posts and insulators on all model Harleys 1930-48. The
Colony kit provides an installation tool to install the post.
4378Kit
Coil Mount Kits
1930-47 Points & Condenser Set
PCPApplication
19361 45 Solo and Servi-car 1930-52 (zinc plated)
72327 VL 1930-36 and 45 1927-45
72281 BT 1937-47
19168 Includes spring
20A-6
Early Exhaust
CLAMPS NOT INCLUDED
WITH HEADER SETS
Knucklehead Stock Replacement Muffler 194149
93005 Black (1001-41)
93006Chrome
UL-ULH SYSTEM USA
4 piece unit for all flat head 74 and 80 1941-48. This allows
the use of any type of 1-3/4 muffler. May also be fitted to
1936-40 models for this purpose.
93055 Black
93056 Chrome
ON UL-ULH Flatheads use the 3-piece front header with muffler with built in Y on 1936-40, or use the 4 piece system and
utilize any 1-3/4 muffler for later years.
UL STOCK MUFFLER WITH BUILT IN Y-PIPE
Replaces OEM#65201-37. Used on all 74 & 80 cu. in. side
valves 1937-40 and 1936-40 Knuckles.
4888Black
93052 Chrome
Chrome Up Sweep Header Sets by Paughco
COMPLETE EXHAUST PIPE CLAMP SET
Stock replacement early exhaust clamp set. Each set includes
all correct clamps for that application.
STOCK EXHAUST CLAMP SETS
Fits
19002 1936-40 Knuckleheads
19003 1941-47 Knuckleheads
19004 1948-57 Panheads
19005 1936-47 UL’s
19006 1930-36 VL’s
19007 1936-51 All 45’s
Pipes include brackets and will accept straight fishtail extensions or mufflers which must be purchased and mounted
separately. Three piece systems feature an ‘S’ type front pipe
for better ground clearance PCP# 95855 and #95986 will not
fit with electric start wrap around oil tank. PCP#95854 and
#95987 can only be used with FXE type battery box. PCP#
95855 must be used with hydraulic brakes only.
PCPApplication
Type
95835 1948-57 Pan
Rigid (3 pce system)
95853 1958-65 Pan
Swing arm (3 pce system)
95854 1966-69 Early Shovel Swing arm
95855 1966-69 Early Shovel Rigid (3 pce system)
95986 1970-84 Late Shovel Rigid
95987 1970-84 Late Shovel Swing arm
UL Clamp Set 1941-48
19005 Black
19216 Chrome
UL Clamp Set 1937-40
19002 Black
19215 Chrome
UL 3 PIECE STOCK EXHAUST SYSTEM
Replaces OEM #65445-37, 65492-39
and 65446-37. Fits all 74 and 80 cu. in.
side valves. 1937-40.
4886Black
93051 Chrome
20A-7
Early Exhaust
CLAMPS NOT INCLUDED
WITH HEADER SETS
45 MILITARY STOCK REPLACEMENT
MUFFLER
Fits all 45’s 1940-45 military bikes.
93002
45 CUBIC INCH 2 PIECE HEADER
SET
Replaces OEM #’s 65490-41 and
65452-41. Fits all 45’s 1941-52 Solos
and Servicars. Black Finish.
4878 Black (1006-41)
19811 Chrome
45 Chrome Muffler 1945-50
93009
1945-50 (65228-50)
45 LATE TYPE CIVILIAN MUFFLER
Replaces OEM #65228-50. Stock on
all 1950-52 45’s.
93003
45” Clamp Set 1941-73
SERVI-CAR MUFFLER USA
Black painted muffler replaces OEM
65220-51. Use on all 1933-73 45”
Servi-Cars.
93004 Black
93017 Chrome
VL STOCK REPLACEMENT MUFFLER
Replaces OEM #1001-30. Fits all 193036 side valve BT
4890Black
93054 Chrome
VL 2 PIECE HEADER SET
Replaces OEM #1004-30 and 1007-30.
Fits all 1930-36 side valve Big Twins.
4891Black
93053 Chrome
19007 Black
19218 Chrome
Knuckle Clamp Set 1937-40
19002 Black
19211 Chrome
Fishtail Muffler 1932-48
Fits ALL Two Wheel 45’s with 2-1/2”
I.D. 1932-48.
6328 Chrome fishtail muffler
VL Clamp Set 1930-36
45 CIVILIAN STOCK REPLACEMENT
MUFFLER
Replaces OEM #1035-32. Stock on all
45’s 1932-49.
6809 Black
BT Clamp Set
EXHAUST PIPE NIPPLE AND NUT
Nickel plated, accurately reproduced
nuts and nipples fit the following:
9209 Nipple 74 & 61, 1924-29, (1012-25)
9210 Nut 74, 1921-24 and 61 & 74, 1925-29, (1014-21)
Chrome Flex Exhaust Covers
Knuckle 1941-47 & Panhead 1948-57.
19004 Black
19212 Chrome
20A-8
19006 Black
19217 Chrome
1-1/2” Cover slides on to fit all 45 models. Sold each.
2421
45’s
1-5/8”
Springer Parts
Spring Fork Rod Kit
Rods are heat treated for wear resistance and parkerized as original.
2318 BT, 45 1936-47
SPRINGER STEM NUT.
Reproduction stem nut for Big Twin
1936-48, 45’s 1929-52.
PC#FinishFits
5250
Chrome Big Twin
5251
Cad
Big Twin
5252 Chrome45”
5253Cad 45”
Springer Acorn Nut and Retainer
Chrome plated acorn nuts and cadmium plated spring retainers for 1930-48
Davidson Springers.
5120
45” SOLO FRONT AXLE.
Replacement front axle for all 1930-52
45” Solo models only. Replaces OEM
#43871-30.
19028
Front Hub Bearing Cone Retainer & Lock Nut
Chrome Plated Stem Nut
Nut is designed to fit Big Twin and ‘45’
Springers. The shoulder on its base
fits into the top triple clamp for positive
alignment.
5130
Big Twin Springers
5161 ‘45’ Springers
Rigid Frame Vibrator Bar
1946-57 Rod Bushings and Plate
Springer Cone Nut
OEM machined gear type with dust
shield pressed on.
PC#OEM Model
19024 48327-36 74-80, 1936-47
19607 As above Chrome
19025 48335-40 45, 1929-57
Accurate reproduction of OEM 4363344 retainer and OEM 43885-30 nut. Fits
all 45 solo 1930-on
9302 Chrome plated
9303 Cad plated
Chrome 8” Springer Hub Cap
Replaces 43300-48 for all 1936-48, 74,
1941-57 Servicar front wheel.
45011
This chromed bar fits between the side
car loops on 1936-57 stock rigid frames.
19118
19119 Ball bushings (45643-45)
19120 Retainer plate (54230-45)
ROCKER STUD LOCK TABS
PC#Type Year/Qty
5116
Big Twin 1936-48 (6)
19026 45 Solo 1945-52 (2)
Front Shackle Hardware
SPRINGER FRONT BRAKE DRUMS
Cast construction available in black or
chrome, replaces OEM 44133-36 on
1936-47, Servi 1941-57.
PCPFinish
19802Black
19803Chrome
Shackle bar includes 2 bushings and
is offered in black or chrome. #2321
is a full hardware kit including all parts
in picture. 3 piece rebuild kit includes
shoulder bolt, lock tabs, and nut/greaser
fitting.
19121 Black shackle bar
19122 Chrome shackle bar
2321 Complete hardware kit only
19123 3 piece kit
19124 Lock tab (5 pack)
19125 Bushings (pair)
20A-9
Springer Parts
Springer Front Brake Grease Seal Kit
Fits Big Twin Springers 1937-1948. Also
Servi-Car 1941-1957.
5287
Springer Spring Rod Bushings
Precision machined bushings are heat
treated for wear resistance and cad
plated as original. Fits 45” and Big Twin
Springers 1931-47.
2317
Front Rocker Stud Assembly
Contains one hardened ground bushing,
one hardened and ground rocker stud
with end plug, one 1/2-20 hardened nut
and two lock tabs.
5114
Complete Rocker Rebuilding Kit
Includes all components pictured to completely rebuild the
rockers on 1930-48 Big Twin Springers, and 1941-57 Servi-car.
All parts are interchangeable with new old stock factory parts.
Materials, heat treating, and plating are of OEM quality.
2319
Big Twin 1930-48
9216 45 Solo models 1930-52
Rocker Stud Bushing Remover/Installer Tool
This piloted mandrel and support sleeve
simplifies bushing removal and installation. Prevents damage to rocker or
bushing.
5118
Rear Rocker Stud Assembly
Contains one hardened and ground
bushing, one hardened and ground
rocker stud with spool spacer and 3/824 nut for fender mount, one 1/2-20
hardened mounting nut and one lock
tab.
5115
Springer Front Brake Operating
Arms, Cad Plated
PCPOEM
Model/Year
19032 44308-36
74 1936-48
Servi 1941-57
Springer Lower Cable Connector
Complete. Replaces 45172-28 on all
Springer brake cable 1928-57. Zinc.
19034
Springer Vinyl Brake Cable
Replaces 45085-30, on Springer Forks
1930-48, 45 models 1930-57.
19033
Rocker Stud Bushing Kit
Contains four hardened and ground
rocker stud bushings, exact duplicate.
5117
Big Twin Springer
5163 Harley ‘45’ Springer
Lower Bearing Guard
45 Fork Rocker
Replace 45661-30 on 45 models 193052 Solo models, pair OEM finish.
19027
20A-10
Springer Front Fender Mounting Kit
Reproduction of hardware used to
install stock front fender on all 1936-48.
2179Kit
5162 Locks Only
Centres lower race on stem.
19382 BT 1936-48 (48361-38)
19383 45 1926-57 (48363-40)
Springer Rebuild
Springer Fork Spring Set
Includes 2 upper 46055-30 and 2 lower
46056-37 for 1937-48 Big Twins,193757 45 models. Available in chrome or
raw (for painting). Exact replica!
13221 Raw Set
13223 Chrome Set
Inner Spring Springs
Take bounce out of springer forks. Lower replaces 46056-37 cushion spring.
Upper replaces 46058-36 recoil bumper
spring. Sold in pairs. USA
PC# TYPEFINISH
13224 Lower Black Oxide
5-1/2” x 1-1/4”
13225LowerChrome
13226 Upper Black Oxide 3-1/4” x 1”
13227UpperChrome
Flanders Style Riser
Original type rubber mounted with 4”
rise for Springer Dog Bone style top tee.
Chrome plated pair.
3062
Stainless Steel Spring Top Plate
Use on all models with in line post.
Replaces 46550-36.
19035 Stainless Cover
19267 As above for offset
Springer Front Brake Cable Adjuster
Cad plated duplicate of original Harley
part. One or two locknuts included depending on application.
8624 Big Twin 1941-1948, Servi-Car 1941-1957
8818 Big Twin 1950-1971, XL
1952-1972, FX 1971-1972
277
Chrome as above
Front Brake Shackle Rebuild Kit
High quality reproduction of original
Harley parts used on 1936-48 Big Twin
and ‘45’ Springers.
2321
Complete Springer Genuine Rocker
Rebuild Kit
Use on all Springers, 45 type 19301952, as pictured. Use on non-removable drum type.
19038 45” Rocker Rebuild
Springer Top Tees
Allows 1” dog bones or Flanders risers
to be used to mount handle bars on
1936-48, 74-80 & 45 Springers, Chrome
PC#TYPE
OEM
19102 Offset w/ Ears 56118-49
19103 Inline w/ Ears
56119-49
Steering Dampner Assembly
For Springer available as a complete kit.
PC#OEM Models
19611 2776-36 BT 1937-40
19039 46700-41 BT 1940-45
19040 46700-46 BT 1946-48
19041 46701-40 45 1940-57
CLUTCH & BRAKE LEVER PIVOT
SCREW KIT
Cad plated reproduction of pivot screws
and nuts used on clutch & brake levers.
Big Twins & 45’s 1941-1964.
5409
BRAKE COUPLING AND OILER
Cad plated solid brass coupling is an
exact reproduction of the original Harley
design and includes the dust cover.
Coupling OEM# 4142-30. Fits all models H.D. 1930-38.
9004
20A-11
Springer Parts
19804
Springer Fork Head Light
Bracket 1936-47
This reproduction mounting bracket fits
1936-on 45” 74” and 80” Twins. The late
type will allow for the use of stock shock
absorber.
PC# OEM# TypeFinish
19806 4966-36 EarlyBlack
19809 4966-36CEarly Chrome
19804 67810-36Late Black
19805 67810-36Late Chrome
RIDE CONTROL 1933-46
Reproduces as original to control the
action of the Springer Fork. Feature
Chrome steel side bars with black control knobs. Replaces 11250-36 on 1937
up 61-74+ 80, 1940-47 45 models. USA
Made.
PC#OEM ITEM
19808 11250-36 Complete Kit
19866 As above Chrome
19105 13421-33 Friction discs 4pc
19106 13454-33 Bushings (pr)
19107 13440-33 Control knob
Springer Spot Light Bar
Chrome, fits all Springers 1936-47,
replaces 68616-46.
19042 Spot light bar
Springer Shock Assembly
1946-57
Includes all shock and mounting hardware for 1946-57 spring fork. Has a
black finish and replaces 54200-45.
PCPDescription
19807 Complete kit
19043 Hardware only
19303 Bushing set (14002-45) 4 pcs
Springer Head Light
Complete, replaces 67701-35, 6V. Exact
with reflector and Bezel, plus glass lens.
PCPDescription
832
Chrome Assy.
3558
Black Assy.
3552Bezel
17015 12V Bulb (each)
19346 Chrome spot light bezel
Springer Front Axle
Fit Big Twin 61-74 & 80, 1936-48,
1941-57 Servi-Car. Axle and spacer are
chrome plated.
PC#
OEMType
3675
43872-36 Chrome Axle
19044 43872-36 Black Axle
1900143884-36 Spacer
1900043882-36 Sleeve
20A-12
Spotlamp Brackets Only
19344 Black bracket set, ride control
19345 As above, chrome (11369-38)
19347 Blk/nuts for above (68620-45)
Ball Bearing Neck Cups
Available in pairs in either cadmium
plated cups only or chrome plated kit
with races & balls.
PC#OEM
USE
5757 48311-36 74 & 80 1936-48
Cadmium
5758 48310-30 45 1930-52
Cadmium
Sportster 1957-77
15700 8860
5/16 Balls (50 pk)
Springer Spotlite
Replaces 11366-38 for all Springer
forks, 12 volt bulb type, 1938-48 style.
4596 12 volt
19346 Chrome spot light bezel
BALL BEARING RACES
74 and 80 BT Springer and early model
Sportster type (1957-77) available. Each
PC#OEM USE
19049 48350-39 Upper/lower 45”
48346-391929-57
19050 48345-36 Upper/lower 74-80
1936-48
Springer
Speedster Handlebars
Spring Fork Assemblies
Assemblies include: full spring set, inner and outer, front and
rear legs; rocker set with all studs and bushings; and spring
rods with bushings. Top clamp, neck races, and cone nut; not
included. 45 solo models have inside rockers for small axle
and internal brake wheel. All other forks have offset mount
rocker to allow interchangeable wheel with lug bolt type drum.
Chrome assemblies feature chrome front legs and outer
springs. Some assembly is required.
ChromeBlack Model Type
9891098905Solo45
9891198906Trike
45 Servi
9891298907Big Twin 74 inline
98908
As above +2”
9891398909Big Twin 74 offset
45” and Big Twin Fork Legs
Fork legs fit 1936-52 45” and Big Twin 1936-48 models. Fork
leg has a 1/2” hole at the rocker area.
Rigid Rear Spring Fork Leg
PCPApplication
98900 1941-45 BT black inline rear leg (45525-36)
98915 As above, chrome (45525-36)
98901 1946-48 BT black offset rear leg (45525-46)
98916 As above, chrome
98902 1940-57 45 solo black rear leg (45526-40)
98918 45 Servi black rear leg (45527-41
Front Spring Fork Leg
98903 BT spring fork with rods (45610-40)
98919 45 black front leg (45610-40)
2318 Spring rods (pair) (45641-36)
Exact replacement of the In Line type Springer bars used on
74-80-45’s 1937-45, 1937-48 45 45 Models, 1936-57 Servicars replaces 55903-37. Painted or chromed as described;
internals not included.
ChromeBlack OEM
Description
930119300755951-36 (A) Speedster, inline
930209302155901-37 (B) Standard, inline
930139301255950-36 (C) Buckhorn, inline
930229301455954-46 Speedster, offset
9301693015
Buckhorn, offset
930239302455901-46 Standard, offset
19200
Internals for bars listed above
9217
6033-30
Chrome pinch bolt
9218
6033-30
Cad pinch bolt
9508
4636
Parkerized pinch bolt
Handlebar End Nuts
Exact reproduction of handlebar end nuts used on 1910-1974
Harley Davidson.
7626
with 57/64-24 thread fits all Twins 1931-36.
7625
with 13/16-24 thread fits 1922-30 all models. 1936 61” only, 1937-48 all models.
9214
w/3/4-16 thread fits K, XL 1954-72, FL 1954-74.
Handlebar Throttle & Spark & Roller Pin Kit
Hardened and ground rollers, pins and cable screw.
8923 All H.D. 1910-48, OEM: 9281, 56278-10, 56283-31
8924 All H.D. 1954-74, OEM: 9261, 56278-10, 10-32 set screw
Spring Rod Stabilizer
Reproduction of original 1930s accessory. Fits 1930-1948 all Springers, includes 2 nuts.
19029 Brass construction
20A-13
Handlebar
Inner and Outer Throttle
Spark Casing Assembly
PCP#OEM# Description
19175 56502-32 1932-48 Outer, large, vinyl 48”
19176 56502-32 As above, with cotton braid cover
19177 1909-31 Outer, large, nickel
19178 56528-49 1948-72 Outer, small
19276 56628-49C 1949-52 Outer, small, cotton braid
19179 56360-61 1961-on Outer, small
19180 56373-09 All, inner wire 1909-64
19181 56420-09 1909-48 Cable end
Throttle Control Parts All Twins 1949-53
PCPOEM
19182 56220-48
19178 56528-49
19180 56373-09
Description
Grip spiral
Outer control casing
Inner wire
Throttle Control Parts All Twins 1954-64
PCPOEM
Description
19183 56400-53A Plunger #68
19178 56528-49 Outer control casing
Handlebar Spirals
PCP#OEM# Description
19206 56245-35 1936-48 chrome
19207 56220-48 1949-53 raw
19208 56220-53 1954-70 raw
19209* 56220-58 1971-74 throttle, raw
Note: Reverses direction on 1954-70 throttle
Throttle Spirals and Cable Kits
Kits include all internal parts required for years listed.
PCP Years SidesThrottle
19200 1936-482
Push
19201 1949-532
Push
19202 1954-732
Push
19203 1965-701
Push
19204 1971-731
Pull
Throttle Control Parts All Models 1936-48
Throttle Control Parts
Handlebar Plunger Kit, replaces OEM# 56271-36
Fit 1937-48, 74 & 80 Twins (OEM# 9281, 56270-36, 56278-10
& 56281-31)
51000Kit
20A-14
PCPOEM
51000 56271-36
19206 56245-35
7626 56287-36
7625 3330-31
8923 9281,
56281-31,
56278-10
19268
Description
Complete plunger kit
Chrome spiral
Cadmium handlebar end nut (pr)
Cadmium handlebar end nut (pr)
Handlebar control roller and pin kit
Outer & inner wire w. plug 1932-48
Springer Parts
Long 1909 Grip Set
OEM replacement #3310-09. Original style used for restoration. Custom application must be shortened. Fits “74” and “80”
most stock controls.
5540 Black
1952 Style Stock Grips
OEM replacement #56212-53. Replica-waffle style. Fits all
H.D. models 1949-1961. Sold in pairs
5437 Black
Waffle Style Grips
Nostalgic style waffle texture for 1974-up Twins, 1” + 1-1/8”
5440 Black set
Short Stock Grip Set
Smooth original style. OEM replacement #56205-62A. Set
includes chrome end plugs. Fits FL-FLH 1962-1973.
5271 Black
5272 White
Spring Fork Top Trees and Risers
PCPOEM
19310 19103 56119-49
19198
19102 56118-49
19221
3062
19035 46550-36
19267 46550-46
Description
(A) 4” Dog bones
(B) Chrome tree with ears inline
(B) As above, zinc
(C) Chrome tree with ears offset
(C) As above, zinc
(D) 4” Chrome Flanders risers
(F) S.S. cover inline
(F) S.S. Cover offset
Spring Fork Installation Kits
Complete kits include zinc plated neck cups, ball bearings,
upper and lower races, black nut with dust cover pressed on
and parkerized top nut.
PCPApplication
19311 Ball type 45”, Servi 1939-57
19312 Ball type BT 36-48
19313 Timken type BT 36-48
Front Vinyl Brake Coil
1931-48
19535 4143-30C (each)
Riser Stantions
Stantions fit spring fork top trees with 1” ears to allow rubber mounted glide risers to be fitted with 1 piece later style
handlebars. Sold in pairs.
19173 Chrome glide risers
19174 Zinc stantions
Cable Oiler Kit
19556 1939-48 (45102-39)
Brake Coil Ferrule 1931-48
19537
20A-15
Springer Parts
Not Included
Not Included
Not Included
Not Included
2319
Fork Rocker Rebuilding Kits
PCP# 2319 includes parts shown except where noted as “not included”. All parts are interchangeable with OEM hardware.
BT 1930-48
2319 Complete hardware rebuild kit Servi Car 1941-57
5115
Rear rocker stud kit
5114
Front rocker stud kit
19315 Rocker set (45655-30, 45658-30)
5116
Lock tab kit (6 pk)
5117
Bushing set (45667-30) (4 pk)
19317 Spacers (45684-41) (pair)
45 Solo Model 1930-52
19038 Complete hardware kit
9216 As above, Colony
19318 Chrome rocker set with 5/8” holes
19027 Rocker set, stock (45661-30)
19319 As above with studs
19320 As above, chrome with studs
5163 Bushing set (45668-30) (4 pk)
5118
Bushing installer/remover BT, 45 rocker
19026 Lock tabs 1945-52 (pair)
Complete Black BT Rocker Kit
SPRINGER MIRRORS
Original style black finished, great for restoration 1930-up,
exact duplicate of the OEM part, made in U.S.A.
OEM TYPE
1908711350-34
Stock
19088*11350-41M
Military
Rockers fit BT 1936-48 and Servi Car 1946-57. Includes
locks, all studs and installed bushings.
19314 Kit as shown
19315 Black rockers only
19316 Chrome rockers only
*Military version features adjustable stem.
20A-16
Handlebar
Complete Spring Fork Handlebar Assembly
Speedster style bars feature cloth covered wires, chrome
horn and dimmer switches and are fitted with all internal
throttle components including cables and grips.
93025 Black inline
93026 Chrome inline
93030 Black offset
93031 Chrome offset
Throttle & Spark Cable Brackets
Feature per finish and hardware.
PC# OEM
#Year/Model
19078 3371-36 A 1936-48 OHV BT
19079 3371-37 B 1937-48 SV BT
19080 9967
C 1930-73 45”
19081 55627-38 D 1930-48 SV BT
Type
Throttle
Throttle
Throttle & Spark
Spark
Hollywood Handlebars
Bars have a cross brace for extra rigidity.
PCPDescription
93027 Black, inline
93028 Chrome, inline
93029 Black, offset
Handlebar Cross Bar
Curved, 1” bar features milled ends and fits 1936-57 spring
fork bars. Includes 2 chrome clamps and bolts.
19847
Handlebar Plunger
Handlebar Bolt Kit
Duplicate of pinch bolts used on 1936-48 BT Springers, 1940on 45 Springers. OEM 4636 includes lockwashers.
9217 Chrome
9218 Cad
9508 Parkerized
Accurate reproduction of throttle and spark plunger. 2 plungers per kit for the following:
PCPOEM Description
9505 3316-36
1936 61”, BT 1937-48, 45 Solo and Servicar 1940-48
9804 3316-31
45 Solo and Servicar 1931-39, VL 1931-36
Throttle & Spark Coil Spool
1918-48 (each)
19536
20A-17
Handlebar-Front End
Chrome Spring Covers
Spring Fork Windshield 36-47
Includes zinc fitting for handlebar mounting. Mount kit available separately.
52144 Complete shield
1941-48 BT Spring Fork Cable & Handle Kit
Includes replica style cable with oiler fitting and end ferrules,
a polished or chrome handle and clamps to attach cable to
bars and fork legs.
PCP
Handle Finish
50238 Polished
50239 Chrome
Replica Lever Assemblies
1941-64 Replica Brake Clutch Handle
Features accurately formed clamp and cadmium plated hardware to replace 45002-41.
50236
Replica Brake Lever
Include slotted lever bushing as original with small hole for
brake or clutch.
PCPFinish Item
50208 Chrome Complete assembly (45002-41)
50207 Polished Complete assembly (45002-41)
50240 Polished Complete with ball end
50241 Chrome Complete with ball end
50242 Polished Lever only with ball end
50243 Chrome Lever only with ball end
50244 Lever only, stock style (45017-41)
50245 Chrome Lever only, stock style
16280
Lever clamp strap
5409 Cadmium 1941-64 Pin and nut (45031-41)
10160 1949-64 Lever bushing w/cotter
(45033-49)
20A-18
Available to fit upper and lower
springs and rocker studs on Big
Twin. Order as required for 193657 spring forks.
19385 Upper round (pair)
19386 Lower round (pair)
19387 Rocker tear drop (pair)
19388 Rocker with bird (pair)
Chrome reproduction complete as pictured for 1928-40
Springer models. Replaces 45002-28.
50237
Frame Related
Colony Seat Post Bushing Installation Tool
Heat treated with a black oxide
finish. Use tool to install seat post
bushing.
72086 BT 1936-57
72087 45 and Singles 1929-on, VL 1930-36
45 Footboard Support Rods
19391 Solo models 1932-52
Rear Stand Pivot Bolt
Fits BT and 45” 1938-57 models.
Replaces 49570-38.
19589 Each
45 SOLO TOOL BOX BRACKET
Fits 1941-52 45 solo. Replaces
64450-41. USA made, zinc
plated.
19074
Rear Frame Stands
BT Side Car Connector Kit
Comes complete with upper, front and lower fittings.
19590 87136-37 Sidecar front tire rod
Fits rigid 74, 80 and 45 models. Has painted or chrome finish and requires stand clutch and mounting hardware to be
ordered separately.
PCPOEM Application
19813 49502-36 1936-52 45 Solo, painted
19814 49500-36 74 & 80 1938-57, painted
3815 49580-36 74 & 80 Catch, painted
19077 49581-36 45 Solo catch, painted
Left and Right Sidebar- Front and rear Support
Rod Mounting Kit
Accurately reproduced special shoulder nuts, nuts and washers fit all 45’s 1932-73.
PCPDescription
9802 Parkerized
Rear Stand Mounting Hardware
Sidecar Body Support Rods Stud Repair Kit
Complete kit contains studs, bushings, washers and nuts
to rebuild your support rods back to factory specs. Used on
1941-84 models.
72433
Parkerized hardware kits are an accurate reproduction of
original Harley fasteners used to mount the rear stand.
19014 BT SV 1930-36 (4526-35)
19015 OHV 1936, BT SV 1937, 45 1936-38
19022 BT 1938-57, 45 1939-on
20A-19
Frame Related
Early H.D. Footboards WITHOUT Black Pads
Fit 1914-39 (2938-14)
3777 Raw finish
Jiffy Stand Parts 45 Solo 1929-52
45 Floorboards Brackets
Fits all 1929-52 solo models 1933-73, Servi car, 4 piece set,
black, OEM type.
5500 Brackets Only
Footboard Hinge Bolt Kit
Cad plated reproduction of special shoulder bolts used to
mount footboards on all Harley Davidson 1914-up.
5364
PCPOEM
19389 50002-32
19398 50002-32
13232 50012-30
13231 50012-30
19070 50035-30
19397 50045-32
19071 50060-30
19446 50060-30
19072 50092-30
19073 50110-30
19349
Description
Complete assembly, black
Complete assembly w/chrome leg
Spring, black
Spring, chrome
Spring plate, zinc
Mount bracket
Jiffy leg, black
Jiffy leg, chrome
Leg bushing
U-bolt (ea)
As above cad plated
Original Style Buddy Seat (Vinyl)
96163
Footboard Stud Mounting Kit
Parkerized duplicates of original fasteners used to mount footboard studs.
9905 BT 1936-57 (shown)
9906 Servicar & 45 Solo 1935-on
Rear Fender Mounting Strap
1936-57
19329
Floorboard Extension Pads
Pads clamp on to 1914-65 style floorboards. Replaces 52654-33, 5265533, 52668-33.
19444 Parkerized
19445 Chrome
20A-20
BT Top Motor Mounts
Mounts are 2 halves with seat tee and rear tank mounts
incorporated into the top mount. Weld-in place for accurate
restoration.
PCPDescription
19694 1936-47 Knuckle
19695 1948-52 Pan
19696 1953-69 Pan-Shovel
19697 1970-84 Shovel
Highway Bars
WARNINGS: These Highway Bars are for cosmetic use
WARNINGS:
These
Highway
Bars
are for
cosmeticinuse
only
and will not
provide
leg or
vehicle
protection
the
only
and
will
not
provide
leg
or
vehicle
protection
in the
event of a low-speed fall. They are not made or intended
event
of a protection
low-speed from
fall. They
are
not made
or intended
to
provide
bodily
injury
in a collision
with
to automobile
provide protection
from object.
bodily injury in a collision
an
or any other
with an automobile or any other object.
45” CRASH BARS
Fits 1929-73 Solo, Servi-Car front 1936-73
PCP
OEMTYPE FINISH
93008 49150-29B Rear 1929-52 Paint
93018 49151-29C Rear 1929-52 Chrome
PCPOEM Year
6080 49038-36 1936-47
93010 49035-35B1929-73
93019 49036-35 1929-73
Model
BT 74-80 1955-57 straight leg 1” (A)
45 Solo and Servi, black
As above, chrome
Safety Guard Mounting Kit
Parkerized U-bolts replace OEM 49064-36. Kit includes Ubolts, nuts and lockwashers to mount safety guard on 193747 61”, 74” and 80” models.
72203
45 Rear Bar Mount Kit
Kit includes 49180-36 studs (2), 49177-38 “U” clamps (2),
and 66302-29 mount plate for solo models 1938-52.
PCPDescription
19076 Complete kit
19115 Mount plate
19116 Stud set
“U” Clamps
Forged design like OEM.
PCPOEM
Application
19279 13051-36 74-80 Front engine bar (pr)
19280 31734-36 74-80 Spark coil (pr)
19281 31735-29 45 Spark coil (pr)
19282 38460-52 Mouse trap booster clamp, Police shifter clamp (ea)
19075 49061-32 45 Front engine bar (pr)
19283 49064-36 Side car front clamp (pr)
19284 49177-38 45 Rear engine bar (pr)
19073 50110-30
45 front jiffy stand (ea)
19285 87701-79 Rear late side car (pr)
BT Rear Frame Bar Mounting Kit
Fits BT 1936-57. Order PCP# 24068 upper bolt studs when
you want to leave fender bolted in place after removing the
bar.
PCPDescription
9530 Chrome bolt kit
9531 Cadium bolt kit
9532 Parkerized bolt kit (shown)
24066 Black upper bolts
24067 Zinc lower bolt kit (6pcs)
20A-21
Fenders
6098
Springer Front Fender for Big Twins
Accurate, faithful reproduction of the original fender. Complete
with braces and fender edge “reveal”. For all 61”, 74” and 80”
Big Twins 1941 thru 1948.
6098 OEM 59012-40
Spring Fork Front Fenders
Glide Front Fender 1949-57
Front Fender Mounting Kit
Raw fender features early type riveted brackets.
88201 59000-48A
Are full width 7-1/2” for 16” or 18” wheels with riveted on
braces. 45 type fits with rockers inside the forks. BT fits with
outside rockers.
PCPApplication
88205 BT 1936-46, replica w/thin braces
88206 BT 1947-48, replica w/thick braces (59000-36)
88218 45 1937-52
88220 RL 1934-36, replica (3702-34)
27285 Lower brace set BT 1936-48 (59135-36)
4501 Stainless steel trim for above
Reproduction of stock Harley hardware used to install stock
fenders.
Chr. Cad Parker.Description
974221799680 Springers 1936-48
-
-5162Locks only
Atlas Style Replica Front Engine Bar Bolt
Glide Fender Brackets
Will mount to 1936-47 Big Twin front bar. Cover includes
U-bolt and acorn nuts.
PCPFinish 19875 Polished
19876 Chrome
Use to repair braces on 1948-84 FLH fenders or for mounting
on custom 7” wide fenders.
PCPFits
27286 1958-84 style
27282 1949-57 style
20A-22
Frames - Fenders - Tanks
We suggest pre-fitting all component parts including
engine and transmission assemblies before painting or
final assembly of a frame, fender or tank.
Rear Fenders
6029
88002
6005
74-80 & 45 Rigid Rear Fenders
Luggage Carrier
Fits 45” rigid frames only. Includes military saddlebag mount
bracket fastened in place. Army finish.
19838
Fully assembled and riveted together with hinge. 88000 and
6005 have relief over skirts to accept stainless fender trim
attached by clips. 6029 has smooth skirts for exact style on
1949-57 Rigid BT. 6029 & 88000 have built-in fender plate.
PCPApplication
88000 74 & 80 1936-48 (59604-39)
88002* As above, w/narrow braces 1936-57
88004* As above, w/wide braces 1947-48
88006 BT 1949-51 (59604-49)
6029 BT 1949-57 (59604-55) stock on 1955-57
88001 Bob fender BT 1936-57
6005 45 Solo 1937-46 (59612-41)
88007 45 solo with narrow braces (59612-41)
19368 45 Solo side skirt set (4pcs)
19369 Fender plate 1937-48 (59637-36)
88003 Army 45 Solo 1936-52 (3710-41A)
88103 Fender end BT 1949-57, 45 1950-52 (59699-49)
88104 Fender end BT 1939-48 (59699-39)
*Note: Features 2 piece spot welded skirt. Preston #88001
and 88007 have 1936-38 rear tail lamp shroud attached
Parkerized Luggage Carrier Mount Kit
PCPApplication
72347 1926-41 DL, RL, WL, 45’s
72348 1942-on WL, WLA, WLC 45’s
Rear Fender Frame Clamp Bolt Kit
Parkerized OEM 59802-47 and 4004 bolts, nuts and washers
used on 1936-57 BT.
72493
20A-23
Fenders
Springer Front Fender for ServiCars & 45’s
Rigid Rear Fender for 1936-48 Big Twin Models
An accurate reproduction of the rigid rear fender used on
1936 thru 1948 overhead valve Big Twins. Perfect in detail
and complete with brackets ready to bolt-on. Comes unpainted. Does not have taillight cut out.
88000 OEM 3711-39 (59604-39)
A genuine reproduction of the original. This fender is the final
touch for your restoration or custom needs. Fits all Servi-Cars
1949-53, 45’s 1949-57 and can also be used on 1936-48 Big
Twins as a custom application.
6008 OEM 59007-50
BT 1939-48 Rear Fender Gate
88104
Rear Fender Tail Gate
PCP
OEM 6057 —
88102
59699-73
27104
59853-58
10186
59851-39
10176
59862-30
Description
FLH Rear Fender Tail Gate
(No Light Holes) Plain Finish
1973-on Tail Light Hole
Hinge w/pin 1958-78
Hinge with pin 1939-48
Hinge Pin 1936-78 (ea.)
Rear Stand Clip for FL Models (Raw)
Original-style rear stand clip fitting all Big Twins 1936-57. Clip
comes pre-drilled and ready for mounting.
PC # OEM #
Description
3815 49580-36 Rear Stand Clip. BT Rigid 1937-57
19077 49581-36 Rear Stand Clip 45 Solo 1936-52
Stainless Steel Fender Trim Set
Includes two 9” & two 10”
strips for top of rear fender
& T bolts for mounting.
27158
Rigid Frame Fender
Clamp Set
Rigid Rear Fender Stripe Set 1949-57
19348
20A-24
Set of 2 chrome U-clamps &
bolts mounts fender to frame
behind battery.
941
Chrome (59800-36)
19665 Parkerized (pair)
Fender Trim
Rear Fender Trim-USA
Springer Front Fender
Stainless steel fender trim set. Relaces OEM #59200-39. Fits
all 1940-48 all models; 1949-up 45’s. Complete with clips.
USA
4501 Kit
Stainless steel fender trim set. Replaces OEM #59882-39.
Fits all 1939-48 all models. Complete with clips.
4505 BT 1939-48
82033 Side car trim kit 1936-67 (87929-39)
82034 Servi car trim kit 1939-67 (85102)
Fender Trim Fastening Clip
Replacement trim clips only. Replaces
OEM #59225-39.
5548 1939-48 (25 pack)
Early Fender Emblems
Sold as pairs, deluxe & OHV types. Nickel plated with stud &
nuts attached to mount to saddle bags, fenders.
2111
Deluxe (11530-46)
2112
O.H.V. (91583-52)
12640 Speed nuts (10 pack) (7613A)
Fender Trim Set 1949-56 OHV
A complete set of fender trim and fittings duplicating the original 1949 thru 1956 factory styling. Can be used for restoration, or to bring a classic look to any FL style front fender from
1949-up. Set includes 2 front fender side trim spears, front
fender lower trim, and front fender tip.
PC #
OEM #
Description
3118
--
Complete trim set (pictured)
16219 59207-49
Lower rear trim only
4347
59205-49 Front trim spear set only
4346
59215-49
Front tip only
Duo-Glide Emblems
Aluminum (not chromed)
1622 Pair (59195-58)
Sold as a set of two.
Front Fender Emblem Sets
1236 Hydra-glide (91582-50)
Early Fender Tips
Embossed Eagle Type fits 1935-46 fenders—replaces Front
3724-48B, Rear 3724-48A.
4343 Front
4344 Rear
Glide Fender Nameplate
Chrome Old-Style Luggage Rack
Chrome nameplate replaces 59196-65 on 1965-up FL-FLH.
2113
Pair
Replica of the early accessory rack, used on all rear fenders
1935 & up. Great for attaching throw-over saddle bags. Does
not interfere with Buddy or Police style seats on post.
3215 Rear luggage rack
20A-25
Colony
Speedo Cable Clamps
Exact duplicate of original Harley clamps.
Item
PCPApplication
A
9646 74 & 80 Sidevalves 1936-38, 61 & 74 OHV 1936-51, parkerized (67075-36)
B
9647 45 Solo 1937-85, Servi-Car 1937-56, parkerized (67074-37)
C
9648 45 Solo 1941-52, parkerized (67076-41)
D
9649 74 & 80 Sidevalves 1939-48, parkerized (67086-39)
E
9650 O.H.V. BT 1952-56, parkerized (67075-52)
F
9651 O.H.V. BT 1957-61, parkerized (67074-57)
G
9652 O.H.V. BT 1961-80, zinc plated (67074-57A)
Chrome Saddle Bag Mounting Plates
Use on rigid frame fenders 1936-57, can also be bolted to
swing arm struts. Exact stamped, as original. Use saddle
bag mounting ovals to mount stock or custom bags to rigid
frames!
4443 Pair
Fender Hardware
Front Fender Lamp Wire Kit
Steel tube, clamps, nuts, connectors, wire and loom will secure wire to fender as original. Duplicate of OEM kits, fits all
models 1935-47.
9786
Colony Saddle Bag Mount Kit
Colony Rear Fender Mounting Kit
Cad plated studs, chrome plated acorn nuts to install saddle
bag mounting plates on all models 1934-57.
5203 Kit
Reproduction of stock hardware used to mount rear fender.
Chr.Cad Parker.Application
97081793 9707 BT 1936-57
97909791 9792 45 Solo ‘29-52
20A-26
Gas Tank
CARB SUPPORT BRACKETS
Exact replica for Linkert carbs
45 Tank Set
Oil and gas tank set fits Solo and Servi car 1936-73. Tanks
will accept cateye dash plate and gas shut off rod kit. Shift
gate mount holes 3 3/8” c/c.
PCPDescription
89060 Tank set
19169 Chrome cap set
19184 “Oil” cap only
9894 Chrome mount bolt
9895 Cadium mount bolt
9896 Parkerized mount bolt
OEM
Model #Year
19082 27431-41
OHV BT
A
1941-53
3817* 27431-41C OHV BT
A
As above, chrome
19083 27431-41B OHV BT
B
1954-65
19635 27431-41B OHV BT
1954-65
19084 1110-33
SV BT
C
1930-38
19085 1110-39
SV BT
D
1939-48
19086 27432-36
45 Models E
1936-58
23068 62762-52BT 1954-64
62763-52
* Chrome, all other numbers Parkerized finish
45 TANK FILLER STRIP
Replaces OEM# 3502-37B. Use on all 45’s, 1937-73. 19097 Cadmium plated.
Gas Tank Shut Off Valve Extension Knob
Allows for easier operation of the shut off valve used on 194065 gas tanks.
1801
Oil Dipstick
Replaces OEM 62631-37 on all 45’s 1937-73.
19286
45 PARTS
5567
4409
1941-46 TANK TRIM
Includes 4 stainless strips, 2 (61801-41), 2 (61799-41)
4409 Trim (4 pc.)
5567 Mount Strips (4 pc.)
TOP OF TANK SCREW AND WASHER KIT
Duplicate of original Harley hardware used to mount tank to
frame on all Harley 1918-1936, 1936-1952 45’s. OEM# 3665
Bolt, 61820-18 Washer. Kit includes paper gaskets to avoid
paint chipping as original.
5411
Nickle Plated
5412 Cad Plated
20A-27
Gas Tank
3.5 Gal Knuckle Bobbed Tank Set 1936-47
Tanks feature hand shift mounts and a shut-off rod provision.
Order shut-off rod and seal kit separately. Tanks are also
available with 3 mount strips welded to each side to attach
stock 1940-46 emblems and stainless trim. Emblems and trim
are available separately.
PCPDescription
89075 Tanks 1936-39
89061 Tanks without trim mounts 1940
89062 Tanks with trim mounts 1941-46
29600 Emblems 1941-46
4409 Stainless trim (4 pieces) 1941-46
Colony Manifold Nipple
PCPApplication
9422 45” 1937-73
9423 74-80 SV 1930-48
9513 OHV 1936-39
684
Bob Gas Valves
Valves include complete shut off rod and seat assembly for
61” and 74” models with left tank reserve. Includes spring and
sealing washers.
PCPDescription
684
Gas valve assembly BT 1950-65
19243 As above, 45” 1950-57
19244 As above, 45” 1941-49
14071 Seals (10 pack) (62085-40)
19245 Rod hardware kit 1941-65
19246 Shut off rod seat 1941-49 (62075-40)
19247 Shut off rod seat 1950-65 (62075-50)
Gas Tank Mounting Kit
Includes fasteners used to
mount gas tank on 1937-52 45
Solo and 1937-on Servicar.
9894 Chrome
9895 Cad
9896 Parkerized
20A-28
Speedo Drive Units
OEM replacement unit includes housing and gear for transmission drive.
PCPApplication
4631 1936-61 BT 11T (67130-36)
3888 Gear and shaft only 1936-61 BT 11T (67135-36)
4632 1962-67 BT 13T (67130-62)
4633 1968-80 BT 23T (67130-69)
2329 1937-52 45 Solo 8T(67129-39B)
19064 Retainer for above #2329
16513 1938-61 45 Servi 8T (67131-38)
16516 1962-73 45 Servi 13T (67131-62)
Early Style Vented Caps
Tall style chrome caps with small
knurl fit factory Bobbed Tanks
1936-64. Replace 61103-36.
19195 Pair
Shut Off Rod Knob Kit 1941-65
Knob and seal cap are cad plated. Kit
includes all pieces as shown.
19396
Tank Related
Rear Tank Mount Clips
Right and left sides for Big Twins to
mount rear tank bolts and seat tee
pair.
4557
Shut Off Hardware and Gas Tank Fitting Kit
#PCP
1 1801
2 19248
3 1807
Description
Chrome knob 1940-65 (91690-49)
45” Shut off spacer 1940-65 (62096-40)
Gas tank fitting kit 1940-65 (3 pcs)
Mounts for Bob Tanks
Frame saver kit may be welded to all 1936-85 BT frames,
stock or custom, to replace original brackets.
PCPDescription
1215 Complete kit
4552 Lower mount
16350 Rear mount clips (pair)
FatBob Tank Tabs
Four piece set for front top and bottom,
left and right, weld on to repair broken
tabs on stock and aftermarket tanks.
Pairs.
5044
Gas Valve Shut-Off Kit
Chrome plated Fat Bob gas tank shut-off kit. This kit comes
complete with all parts necessary to replace the old style gas
shut-off valve. Kit contains cover for gas shut-off rod hole,
fittings for adapting carb—gas line and fittings. For Harleys
1936-65 with 3.5 and 5 gallon tanks.
1382
Linkert Carburetor Fitting
Chrome fitting with O-ring designed
to use 1/4” flexible hose on Linkert carbs.
1732
Fat Bob Crossover
Gas Line
Crossover gas line to fit the
stock 1957-65 Harley Fat
Bob gas tanks.
2477 Chrome (62355-48)
19488 Cad
45 Mikuni Carb Kit
Includes 34mm Mikuni carb, adaptor flange to fit 1936-52
stock manifold #27024-36, Anderson style 1” twist grip assembly, air cleaner and cable. Order carb manifold separately.
PCPItem
21870 Carb kit
19054 Manifold
Shift Mount Tab Kit
Includes 2 brackets and tube for replacements on BT hand
shift tanks, must be welded on.
19551 Shift tab with 4 mounts
20A-29
LINKERT
Linkert Carb Misc. Hardware (custom orders)
PCPOEM
Item
16117 27037-33 Early float bowl
16016 27043-41 Spacer
16017 27215-33 Choke shaft 16018 27218-48 Choke shaft 16019 27219-36 Air in shaft stop 16054 27225-24 1-¼” Choke disc
16062 27252-37 Lever 16082 27260-40 Lever 13000 27270-49 Lever screw spring
16085 27280-40 1-½” Throttle door
16086 27280-40A Oversize throttle door
16087 27280-51 Throttle disc (9-X)
18537 27290-24 Shaft bushing set
13013 27291-32 Shaft spring
16088 27297-27 HS Needle valve
16089 As above Oversized
16090 27298-40 HS Needle 16091 27297-40 HS Needle valve
16092 27300-50 HS Needle valve
16093 27318-41 Fixed Jet
16094 37318-50 Fixed jet #18
16095 27318-50 Fixed jet #19
16096 27325-33 Idle body plug (5 pk)
16097 27327-24 Idle passage plug (5 pk)
13014 27330-33 Nozzle spring (10 pk)
16110 27331-33 Main nozzle
16111 27331-40 Main nozzle
16112 27332-50 Main nozzle
16113 27337-27 Low speed needle valve
16114 27340-33 1”, as above
16115 27345-41 Spring collar
13015 27349-27 Needle valve spring
72332 27362-30 1-1/16” Venturi
72338 27363-41 1-5/16” Venturi
72342 27364-41 15/16” Venturi
16118 27371-36 Late float bowl
19109 27380-50 Brass Float
19225 27381-50 Replica float lever
16123 Float pivot nut and bolt
16125 27383-11 Float pivot pin w/caps
16126 27383-11A Float pin w/caps
16127 27390-33 Bowl valve cover cap
16128 27391-36 Bowl gasket
16129 27395-27 Needle valve lever
72598 27397-27 Valve lever screw
13016 27405-26 Choke mech. spring
1503 27450-36 Cable block end
20A-30
Application
45 WLA
45 & SV BT
BT 1930-47 all
BT
1930-47
ULH +45,
1935-48
1940-47 OHV
Throttle Control Parts
Handlebar Plunger Kit, replaces OEM# 56271-36
Fit 1937-48, 74 & 80 Twins (OEM# 9281, 56270-36, 56278-10
& 56281-31)
51000Kit
61”
BT
45, BT
WLA
BT 1940-49
BT 1950-65
45 1941-43,
BT 1941-54
BT 1951-65
BT 1951-65
SV 1933-53
OHV 1940-51
BT 74B
All
45
M74B
45WLA
Carburetor Bowl Lock Nut Kit
Carburetor bowl lock nut kit includes copper gasket, nut and
lockwasher. Fits all 1930-1965 Harley Twins with Linkert
Carb. Replaces OEM# 27375-29
8901 Chrome Plated
8902 Cad Plated
Chrome Plated Oval Head Screw Kit
5/16-24 x 23/32 Long. Slotted oval head screws to fit various
applications such as stock Harley air cleaner and tank shift
guide. Replaces OEM# 33822-36.
5207 3 Pack
Linkert Choke Rod Kit
Choke rod and lever assembly used on all Big Twins with
linkert style carb. An exact reproduction of the original with a
chrome plated lever.
19519 1941-47 Knuckle
3819 1948-65 Panhead
19631 1948-65 Rod (27244-48)
19632 1941-47 Rod (27244-40)
LINKERT
INTAKE MANIFOLD SEALS
Precision machined brass seals are duplicates of the original Harley part. Available for the following Harley Davidson
engines:
1689 1940-54 O.H.V. 74’s
692
Harley ‘45’s
5159 1930-48 All Sidevalves except ‘45’s, also 1936-39 61 Knuckle
Intake Manifold
This replacement type “plumber” manifold is precision cast
from high strength alloy steel,
then precision machined to
provide the ultimate in performance and classic beauty.
This manifold is sold complete
with guaranteed to fit Colony
brass seals to insure satisfaction.
7313 OHV 74’s 1940-54
INTAKE MANIFOLD NIPPLE
Threaded steel nipple is exact
duplicate of original Harley
part. Packaged complete
with oversize rivet and heat
resistant “O” ring to prevent
leakage.
All O.H.V. 74’s 1940-54.
1700
“RUBBER BAND” TYPE INTAKE MANIFOLD CONVERSION KIT FOR 1940-1954 KNUCKLEHEAD AND PANHEAD
Here is a complete conversion kit that will eliminate those
troublesome intake manifold leaks common to Knucklehead
and Panheads with worn and distorted “plumber” style manifold components.
5109 Complete Kit
One Kit Contains:
1 Cast Almag Manifold
2
Conversion Nipples
2
Nipple to Cylinder Head Seals
2 Nipple to Manifold Seals
2 Rivets
4
Carburetor Mounting Screws
1738
1739
1787
Manifold Only
Steel conversion nipple kit only, 19454 O.H.V. 74
Aluminum weld-in nipple kit only
Linkert to Bendix Adapter
INTAKE MANIFOLD NUTS
Precision machined duplicates of original Harley part. These
manifold nuts are guaranteed to fit and seal properly. Now
available for the following Harley Davidson engines:
1940-54 O.H.V. 74’s
1688 Chrome Plated
5121 Cad Plated
Mounts to 4 bolt stock manifold to allow use of Bendix or
Spigot carb.
21669
1930-48 74 & 80 Flathead; 1936-39 61 O.H.V.; 1940-46
WLD
5164 Chrome Plated
5160 Cad Plated
1937-73 Harley ‘45’
5218 Chrome Plated
5219 Cad Plated
20A-31
Linkert
Air Cleaner Mesh Element
and Spring
Woven metal mesh element is the
same style as original. Spring is
for use on J-slot.
PCPDescription
19191 Metal mesh filter with core liner (29036-41)
73516 Spring for J-Slot backing plate (29040-41) (each)
Flathead Intake Manifold
Cast iron manifolds with brass packing rings and cad plated
nuts.
19054 45 WLA 1936-73 (27011-36)
19189 74 & 80 ULH 1937-48 (27012-37)
5218 Chrome manifold nuts 1937-73
692
45 Intake manifold brass seals (pair)
Colony Carb Mounting Screws 1932-64
8930
Carburetor Cable Brackets
PCPApplication
27336 1957-65, 1972 and 1973 XL (38679-72)
27337 1966-71 XL (27449-66)
Carb Throttle Shafts
PCPDescription
19580 Throttle shaft and bushing kit 45 1936-on
19581 1-1/4” Throttle shaft BT 1942-48 (27275-24)
19582 1” Throttle shaft Linkert 45 1936-54 (27275-26)
19583 1-1/4” Throttle shaft kit 1-1/4”
19584 1-1/2” Throttle shaft BT 1940-65 (27276-40)
19585 1-1/2” Throttle shaft and bushing kit 1940-on
20A-32
Cad (use with insulator spacer)
CARB MOUNTING SCREW KIT
Perfect reproduction of slotted hex screws used on all Harley
Davidson with Linkert carb. (No spacer)
5196Cad
AIR CLEANER MOUNTING SCREW AND LOCK KIT
This hardware kit contains 4 correct size hex head screws
and 2 steel locks to prevent loosening.
9017 Fits all Twins 1936-55
1816 Fits all Twins 1956-65
Linkert Carb
Float Lever
19225 27381-50
Linkert
Replica Linket Carb
Completely assembled with all internals.
PCP
Type Year
Model
41040 45 SV
1941-52 M88
41041 BT SV 1937-48 M51
41042 WL SV 1937-41 M41
41043 BT OHV 1941-65 M74
Linkert Overhaul Kit
Includes needle and seat, float, bushings, springs, float pin,
gaskets and hardware for 1933-65 models..
PCPItem
41047 Complete kit with cork float
41049 Complete kit with brass float
41050 Kit without float
19109 Brass float only
Linkert Foam Float and Needle Valve Assembly
16059
Carburetor Needle Valve Lever Screw
Correct reproduction of OEM 27397-27 screw used on all
1927-65 linkert carbs.
72598 Cad plated
Linkert Complete Carb Hardware Assembly Kit
Includes all parts except body.
PCPSizeModel
41044 1-½”M74B
41045 1-¼”M88
41046 1-¼”M88I
Reproduction Linkert Carb Parts
PCP
OEM Item
19109 27380-33Float
19110 27260-49 Arm &
27265-49Bracket
19111 27225-48 Choke
19112 27363-41 Venturi
Model
All
Big Twin
Type
Brass
49-65
Big Twin
Big Twin
M-74
M-74B
Linkert Float Valve Body
Includes needle seat and gasket.
16055 27382-33
20A-33
Linkert Carburetor Venturi
Carburetor Data Chart
1-1/2” Linkert M Series Carburetors
OEM
1134-40
Model
M-25
1” Linkert M Series Carburetors
Venturi
Size
Application
1-5/16”
1940 E, EL, E1941 F, FL
1134-40
27126-40
M-75
1-5/16”
L1941 FL, FLH
optional for 1942-48F, FL
1134-40A
M-35
M-35T
M-35TP
1-1/8”
1941-48 E, EL,
1942-48 F, FL (27128-40)
27128-48
M-36
M-36A
1-1/8”
1949-E50 61
E1949 F, FL field conversion
for M-36
27128-48
M-61
1-1/8”
L1950-52 E, EL
27128-48
M-61B
1-1/8”
Later replacement carb for
1949-52 61
27130-48
M-45
M-45A
1-5/16”
L1949-E50 F, FL field conversion for M-45
27130-48
M-74
1-5/16”
L1950-E51 F, FL
27130-48
M-74B
1-5/16”
L1951-65 F, FL
27146-52
M-53
19/32”
1-1/4”
1952-54 K
27146-52A
M-53A1
1-5/16”
1955-56 KH
OEM
Model
Venturi
Size
Application
1133-30
M-4
M-11
7/8”
1930-35 D, R and Servi-Car
1133-30
M-16
7/8”
1930-35 RL
1930-35 74 Commercial
1133-36
27120-36
M-16
7/8”
1936-48 R, W and Servi-Car
27120-30
M-18
7/8”
1949-58 W and Servi-Car
27150-42
M-17R
13/16”
1942 XA right cylinder
27151-42
M-17L
13/16”
1942 XA left cylinder
1-1/4” Linkert M Series Carburetors
Model
Venturi
Size
Application
1134-30
M-2
M-31
M-21
1-1/16”
1930-33 all 74 except Commercial, 1930-36 DLD and RLD,
1936 RL
1134-33
M-31
M-41
1-1/16”
1933 VLD, 1934-35 74, 1937-41
WL/D, 1936 VLD
Venturis for Linkert Carburetors all HD 1930-65
1134-35
M-41L
1-1/8”
1935-36 VLH
Precision machined aluminum Venturis from Colony.
1134-36
M-5
1-1/16”
1936-39 E and EL
PCP
1-1/16”
1936-39 E and EL,
1950’s replacement carb
1-1/16”
1937-48 U and UL
1942-48 WL, WLD
1942 US Navy
OEM
27128-36
M-55
OEM
Size
Carb Model/Application
72328
27360-29
7/8”
M4, M11, M16, M18
72330
27361-30
1”
72332
27362-30
M31, M42, M54, M54B
1134-37
27122-37
M-51
1134-37A
M-51L
1-1/8”
1937-41 UH and ULH
1133-40M
M-64
1-1/16”
1940 WLA
72334
27363-30
1-1/8”
M41L, M51L
1134-40M
M-65
1-1/16”
1940 UA
27363-40
1-1/8”
M-84
M-641
1-1/16”
15/16”
M61B, M61, M36A, M36,
M35, M35T, M35TP
1133-41M
early 41WLA
unknown military model with oil
bath fitter
72336
72338
27363-41
1-5/16” M74B, M74, M45A, M45
27364-41
15-16”
1133-41M
M-88
15/16”
Later 41WLA, all 42WLA, 194243 WLC, 1949-E51 WLA
72342
1134-41T
M-97
1-1/16”
1941 TA
1134-41
M-90
15/16”
1942 ELC and 1942 ELA
1134-42M
M-58
1-1/16”
1941-42 US (South Africa)
1943-44 US (Navy)
27122-37
M-52
1-1/16”
1949-E51 45
(except W and Servi-Car)
27122-37
M-54
1”
L1951-52 45W and Servi-Car
1133-41M
M-54B
1”
L1951-52 WLA
20A-34
M2, M5, M21, M41, M51,
1-1/16” M52, M55, M58, M64, M65,
M84, M97
M88, M90, M641
Linkert
Gas Strainer Assembly
Cad plated in line style gas strainer is
exact duplicate of OEM 3623-39 used
on 1939-41 Twins. Includes screen and
gasket.
9661
Nickel plated gas strainer is exact duplicate of OEM 3623-32 used on Twins
1932-38. Includes cap, gaskets and
screen.
9659
Gas Strainer Cap
Brass diamond knurl style cap and
gaskets are exact duplicate of OEM
3629-32 cap and 3633-32 gasket. Fits
all Twins 1932-38.
9730
Gas Strainer Rebuild Kit
OEM 3627-39 screen, 3613-39 gasket
and body to carburator gasket to rebuild
in line style gas strainer used on all
Twins 1939-41.
9731
Gas Shut Off Valve
Reproduction of original gas shut off
valve used on 1916-39, OEM 3601-16.
Correct finnish as listed
9597 Nickel plated 1916-35
Cad plated gas strainer is exact duplicate of OEM 3623-41M used on Twins
1942-49. Includes cap, gasket and
screen.
9660
GAS STRAINER CAP (and gaskets)
Reproduction of original Harley cap and
gaskets. Fits Big Twins and 45’s 19321964. OEM 62268-32 cap, 62270-32
gskt.
8925Chrome
8926Cad
Cad plated strainer is exact duplicate
of OEM 62250-50 used on BT 1950-65.
Includes cap, gasket and screen.
9662
GAS STRAINER SCREEN
OEM style brass screen assembly and
gaskets. Fits BT and 45’s 1932-1964.
(62265-32 screen, 62270-32 gasket.)
8927
20A-35
Gas Line
Steel Gas Lines
PCPOEM
19501 3608-42
19502 3607-36
19503 3607-39
19504 3607-40
19505 3607-41A
19506 19507 62352-50
19508 19509 62357-52
Crossover Fit Tank to Tank
Thick Style Early Cables
Fit tank to carburetor, tin or chrome finish.
PCPOEM Description
19492 3606-32 VL 1930-36
19493 3607-37A WL 1937-38
19494 3607-41M WL, GE 1942-49
19496 62354-50 WL 1950-65, GE 1953-65
19498 3607-37 UL 1937-38
19499 3608-39 UL 1939
19500 3608-40 UL 1940-41
Tin finish unless noted.
PCPOEM
Description
19484 62355-40 BT OHV 1940-47
3608-40A
19486 62355-48 OHV 1948
19487 62355-48A OHV 1949-56
3606-48A
19488 62355-48B OHV 1957-65
19490 62355-52 K model 1952-56
12601 62361-50 Gas line nut, cad (each)
14099 62360-50 Gas line rubber sleeve 50-65 (10 pk)
20A-36
Description
UL 1942-48
OHV 1936-38
OHV 1939
OHV 1940-41
OHV 1942-49
As above, chrome
OHV 1950-65
As above, chrome
K model 1952-54
Cables feature a zinc plated, .42” thick outer housing for early
FL trans drive and 45” rear wheel drive.
BlackZincOEM
47408
67026-36A
4741647409
62026-62
47412
62025-37
47413
Application
BT 1936-61
BT 1962-80
45” 1937-52
45” 1937-73
Oil Lines
Chrome Nipple Nut & Tube End
Will attach to tapered tank 63533-15 type fittings and will accept braided or rubber hose.
PCPDescription
19372 Nut (3 pack)
19373 Straight tube w/nut (3 pk)
19374 90 Elbow w/nut
19375 45 Elbow w/nut (3 pk)
Oil Lines XLH & K
Lines are cadmium plated and include nuts and seals.
PCPDescription
10573 Return line nut (pair) (63527-50)
14097 Return line seal (5 pack) (63529-50)
14099 Vent line seal (10 pack) (62360-50)
Inner Primary Drain Tube
For sheet metal early Big Twin primary tube and nut.
PCPApplication
19376 1937-58 Rigid (60546-36)
19377 1959-64 SA (60546-59)
19378 Fitting for cover (60548-36)
Flathead 74 & 80 Oil Line Sets
VLs are cad 2 piece sets and UL, ULH are 3 piece sets.
PCPDescription
19400 Set VL 1930-33
19401 Set VL 1934-36
19402 Set UL, ULH 1938-48
19404 Feed line UL 1937
19405 Feed line UL 1938-48
19406 Vent line UL 1937
19407 Vent line UL 1938-48
19408 Return line UL 1937
19409 Return line UL 1938-48
Banjo Bolts and Washers
PCPDescription
19438 Vent bolt (ea) (63578-36)
14007 Vent washer (5 pk) (6440)
19379 Feed & return bolt (ea) (3520-36A)
19380 Feed washer (10 pk) (3570-36B)
Nipple Bolt for Oil Tank Vent Line
Replaces OEM 63578-36. Used on all 1937-52
45 Twins and BT 1936-39. Sold Each.
19438 Nipple Bolt
14007 Washer for vent bolt (5 pk)
45 Flathead and Servicar Oil Lines 1938-73
Oil Line Fitting Kit
These oil line fitting kits include 4 cadmium plated fittings for
use on OEM frames when an external oil filter is used. Fittings
will work with the aluminium cover oil pump only.
4653 Rigid frame 1936-57
4654 Swingarm frame 1958-64
Cad ChromeDescription
1941019414 3 piece set
1941119415 Feed line (63510-37)
1941219416 Vent line (63570-37)
1941319417 Return line (63507-38)
19436
-
Vent nipple (25235-36)
19437
-
Rear chain oiler (63590-41)
19438
-
Banjo bolt (63573-36)
14007
-
Washer (6440) (5 pack)
20A-37
Oil Lines
Rigid Frame OHV Without Filter
OHV models without filter.
1942019421 3 pc Set 1949-57
1941819419 3 pc Set 1941-48
46653838 Vent line 1938-57 (63572-38)
46643832 Feed line 1938-57 (63511-38)
194243836 Return line 1949-57 (63506-41)
1942219423 Return line 1941-48 (63506-38)
19426
-
Feed line 1936 (3571-36)
19427
-
Feed line 1937 (3571-37D)
19428
-
Vent line 1936-37 (3572-36)
19429
-
Return line 1936-37 (3571-36A)
19430
-
Return line 1938-48 (3571-38C)
Rigid Frame With Filter 1941-57
46633172 4 piece set 1941-48
1943319434 4 piece set 1949-57
194254656 Filter line set only
Knucklehead 1936-47 Oil Lines
Cadmium-plated oil line kit complete with seals and fittings.
This kit fits original HD rigid frames with the external oil filter
on 1938-57 Big Twins.
PCPOEM
Description
4663 Complete oil line kit 1941-48 (shown)
4664 63511-38
Oil pump feed line
4665 63572-38A Oil tank vent line
4666 63500-50 Oil tank return line
4667 63503-50 Oil Filter return line
1936-41 is banjo type and 1942-47 has a flared nut.
PCPOEM Application
5562 3573-36 1936-41 Cad banjo line
19438 63573-36 1936-73 Cad banjo bolt (ea)
9848 1936-41 Cad nipple kit w/banjo bolt and washer
9847 1936-41 Chrome, as above
14007 6440
1936-41 Washer for above (5 pack)
21009* 63480-42 1942-47 Chrome oil line
3843* 63480-42 1942-47 Cad oil line
8941 17330-42 1941-47 Cad line fittings (3 piece set) 17325-42
5297 33615-36 1936-41 Cad line fitting for timing cover
*Note: Nut type ends
Rocker Feedline Nipple
1963-65 Panhead
3845 62780-63
21008
10593 63542-63
10572 63526-57
Oil Line Kit for Harley Rigid Frame O.H.V.
Accurate reproduction of special thread
fitting used on rocker line 1936-41 OHV,
vent line 1937-52.
5297
20A-38
1963-65 Chrome Y line
1963-65 as above, tin plated
1963-65 Elbow for above
1963-84 Line fittings (5 pack)
Oil Lines
Oil Canister Rebuild Kit
Includes all small parts and gaskets for rebuilding.
25606
Knucklehead Oil Filter Kit 1940-47
19550
Oil Line Straight Tube With Nut 1936-64
19373 3 Pack
Banjo Bolts and Washers
PCPApplication
19438 Vent bolt (63678-36) (each)
14007 Vent bolt washer (6440) (5 pack)
19436 Vent nipple 45 1938-73, cadmium (25235-36) (ea)
19379 Feed & return bolt (3520-36A) (each)
19380 Feed & return bolt washer (3570-36B) (10 pack)
Chrome Oil Line Set
19419 BT 1941-48
Original-Style Oil Pump Fittings for Harley
105711056810574 10592 10569
Cad Big Twin Pump and Filter Fittings
PCPOEM
10574 63533-15
10592 26424-50
10571 63526-50
10569 63525-50
10568 63524-50
10573 63527-50
10591 63871-50
Application
1936-64 Oil pump cover to line (ea)
1950-64 Oil pump cover to line (ea)
1958-64 Oil pump cov - filter line (pr)
1940-64 Oil filter line connector (pr)
1940-64 Oil filter line connector (ea)
1950-64 Oil filter line nut (pr)
1941-64 Oil filter cap adapter (ea)
Original-style fittings for Harley Big Twins. Also used with
some custom oil tanks to convert nipples so stainless-steel
braided lines can be used.
4657 Set of 3 for nylon and braided hose
1722 Chrome set of 3 fits steel and braided fixed-end lines
5119
Cad plated as above 1936-64
Knucklehead Rocker Box Oil Line Fitting
One kit contains 2 rocker box and 1 motor case fitting,
chrome plated.
1741
20A-39
Primary
45 Outer Primary
Available original or with accessible clutch area for 1937-63
Solo and Servi-Car. Both may be cut out for electric start.
PCPOEM Description
911
60557-36 Chrome derby cover
25158
60565-36 Derby cork gasket (5 pk)
871
60573-36 Chrome inspection cover
79426
60567-36 Inspection cork gasket (10 pack)
3034
45 Outer primary (raw)
19837
As above, chrome
19825
45 Custom outer primary (raw)
19830
Black as above
19835
Chrome as above
45 Inner Primary for Solo or Trike
1939-73, Raw. Can be adapted to electric start. Plain.
3396
Spring Fork Front Brake Kit
Kit includes: cable, cable end, shackle adjuster, backing
plate, brake shoes, springs, drum, lug arm, cam, pivot stud
and grease seal. Available in black and chrome finish. Brake
handle and axle kit must be ordered separately. Fits 193647 spring forks with offset BT rockers and a star hub wheel.
Order hub and handle separately.
PCPDescription
90102 Chrome kit
90103 Black kit
43322 Axle kit
Early Left Side Levers
50207 Polished (45002-41)
50208 Chrome (45002-41C)
Chrome Rigid Chain Guards
Inner/Outer Primary Cover Mounting Kit
PCPModel
5529 45 Solo 1936-52 (60303-36)
5530 45 Solo, raw (60303-36)
82020 As above black powder
Inner Primary Chain Guard Mounting Kit
Rear Chain Guard Mount Kits for 45”
This complete mounting kit contains reproductions of the
original Harley hardware used to mount the inner and outer
primary covers on VL Harleys and 45’s 1930-on.
5294
Complete mounting kit contains the following: 3813-29 bolts,
3815-29 cupped washers, 3814-29 springs, 0215 washers,
0108 nuts, 0290 cotter prins. Fits 1929-40 45’s and 1929-34
Singles. Parkerized
72283
20A-40
Kit includes bolt, nut, spring, cotter pin and washers.
PCPDescription
9744 Solo 45” 1936-52 and Servi to 1973 chrome
9745 As above, cadmium
9746 As above, parkerized
1936-66 Wire Wheels
Star Hub Parts
PC#OEM#
12511 43546-36B
21307 43549-36
3 2338 43556-36
4 13581 43560-35 5646 43566-35
62512 43564-35
72340
81166
1719
92513
2514
2515
2516
2517
2518
9220
9221
9222
9223
9224
9225
Description
Chrome Hub 1936-66 complete
Rear Wheel Bearing Hub Sleeve
1936-66
Thrust Bearing Sleeve 1941-66
Wheel Adjusting Shims 1941-66
10 Pack
Chrome Star Wheel Cover 1937-66
Wheel Hub Dust Shield 1936-66
Wheel Gasket Kit 1941-66
Chrome Star Wheel Screws for
wheel 1936-66
Chrome Star Wheel Acorn Screws &
Nuts for 1 wheel 1936-66
Right Rollers STD.
Set of 12
Right Rollers +.0002 Set of 12
Right Rollers +.001
Set of 12
74 Wheel Hub & Parts 1936-66
1010729 24721-30 113300 43574-35
123301 43563-35
133302 43558-39
14 3303 43552-39
1511087 43554-35
162346 43561-39
17 10732 43578-35 182519 9220
2520 9221
2521 9222
2522 9223
2523 9224
2524 9225
19 10511 9851
Right Side Roller Retainer 1941-66
Inner Wheel Hub Cover 1936-66
Thrust Washer 1941-66
Brake Side Washer 1936-66 (5 pk)
Wheel Spacer 1936-66
Wheel Thrust washer lock ring
1937-66 (10 pack)
Bearing Collar
Brake Side Roller Retainer 1941-66
Left Rollers STD Set of 14
Left Rollers +.0002 Set of 14
Grease Fitting (10 pk)
Star Hub Wheel Assembly 1936-66
Wheel fits front and rear BT 1936-66. Stock replica wheel hub
comes with loose type roller bearings and replaces 43540-36.
Comes with chrome or stainless steel spokes.
ChromeS.S.
Diam./Width Description
707557075616” x 3.00”
Chrome hub and rim
707577075816” x 3.00”
Black hub, chrome rim
70759
16” x 3.00”
Black hub and black rim
707787077918” x 2.15”
Chrome hub and rim
707807078118” x 2.15”
Black hub, chrome rim
70789
18” x 2.15”
Black hub and rim
45 Solo Front Wheel Assemblies
Includes rim, replica original finish hub and bearings, laced
with stainless steel spokes.
PCPSizeRim
70980 16"Chrome
70981 16" Black
70982 18" Black
70983 18"Chrome
Rear Axle Adjuster Kit BT 1930-36
72069 With cad bolts (5 pc)
20A-41
45 Front Brake
45 Front Axle and Brake Hardware 1930-52
PCPOEM
Description
19012 7811
Axle nuts, chrome
15700 8860
Balls (50 pk)
10511 9851
Grease fitting (10 pk)
10513 9852
90 degree grease fitting (5 pk)
16247 9968
Early frame mount cable clamp
16521 9974
Lower cable to fork clamp
16204 9980
Front brake cable clamp
11109 43630-30 Retaining ring (5 pk)
16587 43632-44 Cone seal 45 front wheel (5 pk)
16588 43635-30 Lockwasher 45 front wheel
16589 Cone nut for sleeve 45 front wheel 1930-52
16590 43640-30 Left inner dirt guard
19028 43871-30Axle
9302 43885-30 Nut and oil seal w/retainer, chrome
9743 As above, parkerized
19458 44145-41 Backing plate 1941-52
18630 44180-30 Backing plate bushing
19125 44223-28 Springer fork brake bushing (pr)
19123 44226-36 Stud, lock tab, nut
44229-40
44231-38
19364 44226-36 Stud only
2321 Shackle rebuild kit
19459 44244-40 Shackle bar, black
20A-42
PCPOEM
19460 44265-31
12006 44270-36
19031 44307-31
19210 19461 44350-30
19339 44405-31
44406-31
19332 44427-35
19462 44450-35
19463 44476-35
13217 44486-28
50207 45002-41
50208 45002-41C
19033 45085-30
19456 19190 19457 45153-28
8624 45162-41
9739 9630 19464 9683 9740 16248 45172-28
19034 45172-28B
Description
Brake cam
Brake cam washer 1936-48
Front brake operating arm 31-52 45”
45 Front brake plate cover kit
45 Front wheel cover plate stud (pr)
Shoe set
Brake lining only
Brake shoe pivot stud
Locking plate
Spring set
Lever assembly, polished
As above, chrome
Brake cable inner/outer 1941-57
Brake cable outer 1928-40
Brake cable inner/outer kit 1930-57
Inner cable only
Cable adjuster 1941-57
As above, chrome
As above, parkerized
Cable adjuster 1928-40 cadmium
As above, chrome
Lower cable clamp, black
Cable connector clamp
BT Springer Brake
Big Twin Spring Fork Brake Parts 1936-48
PCPOEM
10131 490
10201 534
20518 6591
5198 20104 7923
20105 16247 9968
16204 9980
13511 41691-31
19044 43872-36
3675 43872-36
19000 43882-36
19001 43884-36
19192 554
43886-30
19802 44113-36
19803 44113-36C
19455 44146-41
19224 18638 44180-36
5287 44183-36
4694 44475-35
19121 44210-40
19122 2321 19125 44223-28
19364 44226-36
Description
Pin (5 pk)
Cotter pin
Washer (10 pk)
Cad nut kit (4 pcs)
Chrome nut
As above, cad
Cable to fork top clamp
Front brake cable clamp
Copper cam shim (5 pack)
Black front axle kit
Chrome front axle
Front axle sleeve
Chrome spacer
Chrome nut kit (3 pc)
Black brake drum
As above, chrome
Black backing plate
As above, chrome
Bushing for back plate BT
Grease seal kit
Lock plate
Black shackle bar BT 1940-48
As above, chrome
Shackle rebuild kit
Shackle bushing (pr)
Stud only from above
Brake Cable Assembly 45” and BT 1930-57
19190 (45085-30)
PCPDescription
19223 44265-36
12006 44270-36
19032 44308-36
19399 19340 44402-36
3970 44433-39
19222 44449-36
13216 44486-35
50207 45002-41
50208 45002-41C
19033 45085-30
19456 19190 19556 45102-39
19457 45153-28
8624 45162-41
9739 9630 19464 9683 9740 19034 45172-28
16248 45172-28
90102 90103 Brake cam BT
Shaft washer
Operating arm BT 36-48, parkerized
As above, chrome
Shoe set complete BT
Linings only BT
Stud and lock plate
Shoe springs (pr)
Lever assembly, polished
As above, chrome
Brake cable inner/outer 1941-57
Brake cable outer 1928-40
Brake cable inner/outer kit
Oil cup kit, zinc
Inner cable only
Cable adjuster 1941-57
As above, chrome
Cable adjuster 1928-40 cadmium
As above, chrome
Lower cable clamp
As above, chrome
Chrome BT brake kit
As above, black
BT Springer Axle Kit 1936-48
43322 Chrome
43323 Parkerized
20A-43
BT Rigid Brake
20A-44
See Drawing on Previous Page
Big Twin Rear Brake Parts to 1957
PC # OEM #
1 233
42480-36
2 232
42402-36
3 217
42333-30
4 216
42326-37
19516 42326-37
5. 19250 42280-35
6. 235
42560-37
7 1366 42550-31
8 234
42556-36
9 18585 47755-31
10 218
42257-36
11 219
42273-30
12 2275 5242
Description
Chrome brake pedal backing plate 1936-57
Chrome Brake pedal 1936-57
HD Chrome 74 foot pedal brake rod clevis 1936-57
Chrome front foot pedal brake rod 1936-57
Parkerized, as above
Brake rod lock bracket and pin
Chrome right front brake shaft lever 2 hole 1936-57
Mechanical brake crossover shaft 1936-57
Chrome left front brake shaft lever
1 hole 1936-57
Mechanical crossover shaft bushing 1931-57
Chrome rear long brake rod 36-57
Chrome brake rod clevis fit 45’ 1935-52 and 74’s 1936-57
Mechanical brake crossover shaft nut & lock kit (cad)
As above, chrome
Big Twin Rigid Brakes
13 236
41929-36
14 74020 41650-37
74021 15 18571 41685-37
18628 16 1309 41671-36
17 13205 41835-30
18 240
41805-38
19 2047 41848-38
20 74000 41400-37
74001
21 10141 41425-37
22 19226 43530-35A
19227 43530-35A
23 550
41600-36
24 3357 41875-38
25 10105 42269-30
26 4694 44475-35
27 13212 42427-26
Chrome brake lever 1936-57
Black backing plate 1936-57
As above, chrome
Brake cam bushing 1937-57
As above +.015
Brake cam 1936-57
Brake shoe spring 1936-57
Brake shoes complete 1938-57
Brake linings with rivets 1938-57
Black rear brake drum with sprocket 1937-57
As above chrome plated
Drum dowel pins 1937-72 Set
Black wheel lug bolts set of 5 fits 1936-72
As above chromed set of 5
Rear left axle sleeve 1936-57
BT backing plate pivot stud kit for brake shoes 1941-57
Shifter & brake rod clevis pin, washer & cotter pin (5 pk)
Pivot & stud plate biter washer
Brake pedal return spring
Foot Brake Lever Stud
Fits BT 1937-57 and 45 1939-73.
72316 Stock
72310 O/S to 23/32 (needs reaming)
Stock Brake Pedal Pad
OEM replacement #36954-62. Late
model, rear brake. Fits FX 1971 & up.
1295 Black
Stoplight Switch
Once very hard to find and now reproduced this switch includes brake arm
bracket and spring. Chrome-plated.
Replaces OEM 72003-34.
2177 Chrome
19098Black
Foot Brake Lever Stud
Fits BT Knuckle 1936-38
72315 Stock
72309 O/S to 23/32 (needs reaming)
Brake Shoe Pivot Stud
Brake Shaft Nut and Lock Kit
Replaces OEM #’s 41875-38 stud,
41872-38 & 41870-38 Cups. Used on all
1937-57 Big Twins.
3357
This kit contains 2 cad plated special
hex size nuts and 2 Parkerized locks to
prevent loosening of brake cross shaft
components.
2275 Cad Plated
5242 Chrome Plated
20A-45
Brake Drum
45 Rear Brake Parts
Brake Drum with Sprocket
Complete OEM replacements with riveted on sprocket. The
following drums are cast iron material: 74003, 74008, 74004,
74010, 74009, 74012, 74011, 19832. The remaining drums
are made from drawn steel.
PCPOEM Description
74000 41400-37 Black rigid 1937-57
74001 41400-37 As above, chrome
74002 41400-58 Black hydraulic 1958-62
74003* 41400-58 As above, chrome
74004* 41400-63 Black hydraulic 1963-66
74009* 41400-67 Black hydraulic 1967-72
74011* 41401-52 Black XL 1952-78
19832* 41401-41 Black 45 Solo 1941-52
19833 41401-41 As above, chrome
Note:* these drums are of a cast iron material (the others are
made of drawn steel)
For 1941-52 Solo models.
PCPOEM Description
19511 4054-35
Rear cam
82065 4065-35
Parkerized, rear rod
19832 41401-41 Black complete drum
2352 41474-35 Sprocket kit with ring
19510 41652-37 Black backing plate
13583 41692-36 Brake cam shim
19335 41806-41 Complete shoe set
3968 41849-41 Linings, pair
10912 41876-41 Pivot stud
19513 41925-41 Rear arm
19515 42330-39 Parkerized front rod
19512 42566-35 Black bell crank
19463 44476-35 Lock plate
13217 44486-28 Spring set
72326 Parkerized Brake arm anchor stud kit 1935-52
Wheel Lug Bolts for Brake Drums
PCPOEM
19226 43530-35A
19227 43530-35A
19239 43531-35
5401 5402
Description
Black BT 1936-72
As above, chromed
Chrome BT oversize
Chrome bolts and nuts XL 1952-78
As above, cad
Solo Rear Black Backing Plate Assembly 41-52
Includes completely assembled backing plate, arm, shoes,
springs, speedometer drive and cam.
19861
Mechanical Brake Rods
Chr. Parker.Application
21619516Front 74 & 80 1937-57 (42326-37)
21882067Rear 74 & 80 1936-57 (42257-36)
1952719515 Front 45 Solo 1939-52 (4073-39)
8206682065 Rear 45 Solo 1935-52 (4065-35)
19524
Front VL 1930-35 (4063-30)
82064
Rear VL 1930-35 (4065-30)
Clevis
21719525Front all models short (42333-30)
21919526Rear all models long (42273-30)
1010510108 Pin (42269-30) (5 pk)
20A-46
74018
Mechanical Backing Plate Kit BT 1936-57
Includes plate, springs, shoes, cam pivot stud and plate. Arm
not included.
PCPFinish
74013 Chrome
74018 Black
Hardware
Rear Chain Adjusters
Rear Axle Nut and Lock Kit
45 Rear Brake Drum
Unit includes drum with sprocket and
splash ring riveted on. Replaces 4140141, on 1941-52 solo.
19832 Drum complete, black
19833 as above chromed
2352 Sprocket only 41T
Quality reproduction rear axle kit contains sleeve nut, collar, axle nut, and
lockwasher. Fits 1936-52 Harley 45
Solo.
19008 Chrome Plated
19009 Cad Plated
Adjusters are heat treated, plated
and sold in pairs with plated lock nuts
assembled to insure properly fitting
threads.
PCPDescription
5165 Cad BT 1936-72
1796 Chrome BT 1936-72
1632 Chrome Solo 45” 1930-52
5246 Cad Solo 45” 1930-52
Front Axle Nut Kit
Mechanical Brake Drum
Splash Ring
Servi-Car Rear Sprocket
Replaces OEM 82860-32. Use on all
1932-73 Servi-Car. 37 Tooth type.
3763
Replaces OEM #41420-30. Use on all
1930-57 Big Twins. Keeps inside of
brake drum clean and dry.
256
Machined axle nuts just like Harley did
it. Kit contains 2 axle nuts and 2 cotter
pins for the following:
19010 1926-34 Singles,chrome
1929-36 45 Solo, chrome
19011 1926-34 Singles, cad
1929-36 45 Solo, cad
19012 1937-52 45 Solo, chrome
19013 1937-52 45 Solo, cad
HD 45 Servi Car Wheel Brake Cylinder
PC # OEM #
Fits
2330 33460-511951-on
28063 83462-51 Rebuild kit 1951-73
Mechanical Brake Kit 1936-57
For use on mechanical brake frames with a cross shaft tube
only. Can be used for restoration or for forward controls on a
rigid frame.
PCPFinish
19844Chrome
19845 Parkerized
Servi-Car Master Cylinder
Stock replacement master cylinders. Complete and ready to
install. Harley 45” Servi-Car 1951-on.
3971 Complete kit (83500-51)
19099 Rebuild kit (83502-51)
45 Solo Speedo Gear Unit
Complete unit use on 1937-52 solo includes gear & drive
shaft. Replaces 11138-37
PCPOEM
ITEM
232967129-37BDrive
1906467080-37 Retainer
20A-47
Brake Shoes
Brake Shoe Springs
Brake Shoe Sets
Sets are complete with linings installed and are sold in pairs.
Rear, Mechanical
PCPOEM
Application
240
41805-38 Rigid 74” 1938-57
19334* 41805-33 Rigid 74” 1938-57
283
44401-49B XL 1954-78
19335 41806-41 45” Solo 1941-52
Rear, Hydraulic
PCPOEM
244
41801-58A
250
41801-63
59084 19336 83350-51
Application
FLH 1958-62
FLH 1963-72
As above, oversize .025
Servi-G 1951-73
Front, Glide
PCPOEM
Application
19337 44401-49A FLH 1949-72
19338 41849-64 XL 1964-72
Front, Springer
PCPOEM
Application
19339* 44405-35 45” Solo 1931-52
19340 44402-36 61, 71, 80” 1936-47, Servi-G 1941-57
*Note: OEM cast construction
Front (pair)
PCPOEM
13209 41835-69
13216 44484-35
13217 44486-28
13209 41835-69
Application
FLH Glide 1969-72
Springer 74 & 80 36-57, FL Glide
1948-68
45” Solo 1929-52
XL 1952-72
Rear (pair)
PCPOEM Application
13205 41835-30 74 & 80 Mechnical 1936-57
13048 41836-58 Hydraulic 1958-62
41837-58
13049 41836-63 Hydraulic 1963-72
41837-63
13209 41835-69 XL 1952-78
13217 44486-28 45” Solo 1935-52
13049 41836-36 Side car 1958-80
41837-36
13239 88375-51 Servi -Car 1951-73
88373-51
13216 44484-35 Servi-Car 1938-48
Springer front Brake
Shoes 1931-52
19339
Brake Linings with Rivets
PCP OEM WidthApplication
2047 41848-38 1.5”
Rear BT 1938-57, 6 hole
2046 44432-54 1”
Rear XL 1954-78, front BT 1949-72, 8 hole
19331
As above, .025 oversize
2133 41848-64
Front XL 1964-72
2049 41808-63 1-7/16” Rear BT 1963-72, 8 hole
2048 41802-58 1-1/16” Rear BT 1958-62, 8 hole
3970 44433-39 1”
Front BT Springer type forks,
5 hole
19332 44427-35 1”
Front 45” 1935-52, 6 hole
3968 41849-41 1-3/8” Rear 45” Solo 1941-46, 7 hole
19333 83355-51 2”
Rear Servi car 1951-73, 10 hole
20A-48
Wheel Cylinders
PCPApplication
2278 1958-62 BT (41740-58)
5648 1963-72 BT (41740-63)
Rebuild Kits
28063 1951-73 Servi (83462-51)
19630 1958-on Sidecar (87752-58A)

Section 20A CLASSIC AND ANTIQUE 1929-on

Transcription

Similar documents

CA Antique (all other parts)

Maxseal Solenoid Valves

CA Electrical - PrestonCycle

Type Approved Mobile Phone

a COLONY Catalog in PDF Format

baraza la mitihani la tanzania