Product Spec Sheet

Transcription

Product Spec Sheet

Landscape Irrigation Products
2005 – 2006 Catalog
Install Confidence.™
®
Install Rain Bird.
Introduction
Contents
2005 – 2006 Catalog
Introduction
2
How to Use This Catalog
4
New Products
7
Spray Heads
9
Rotary Nozzles
49
Rotors
53
Impacts
113
Valves
125
Controllers
165
Central Controls
199
Commercial Pump Stations
223
Landscape Drip / Xerigation ®
229
Accessories
273
Resources & Training
281
Reference
289
Warranties
303
www.rainbird.com
Table of Contents
1
Introduction
Water. It's what keeps the world alive. As the
world's largest manufacturer of irrigation
products, we believe it is our responsibility to
develop technologies that use water efficiently.
Over the past seven decades, our pioneering
efforts have resulted in more than 130 patents.
From central control systems and automatic
shut-off devices to pressure regulating components
and low volume drip irrigation, Rain Bird designs
products that use water wisely. And our
commitment extends beyond products to
education, training and services for our industry
and our communities.
The need to conserve water has never been
greater. We want to do even more, and with your
help, we can. Visit www.rainbird.com for more
information about The Intelligent Use of Water.™
2
Introduction
www.rainbird.com
2005 – 2006 Catalog
Introduction
Common Water Waste Problems and Solutions Guide
The need to conserve water has never been greater. We want to do even more, and with your help we can. This Application Guide highlights a
number of common water waste problems and describes how Rain Bird ® irrigation products provide solutions that result in more efficient water use.
WATER WASTE PROBLEM
Misting, fogging
SOLUTION
BENEFITS
SPRAY HEADS & ROTORS VALVES & CONTROLLERS
OTHER
Pressure regulating devices
Maintain constant optimal water pressure to prevent misting
and evaporation of water due to high pressure. Every 5 psi
reduction in pressure reduces water usage by 6-8%.
• 1800 ®-PRS (R/C)
• 1800-SAM-PRS (R/C)
• 1800 PCS Screens (R/C)
• Drip Control
Zone Kit (R/C)
• TSJ-PRS (R/C)
Seal-A-Matic™/check
valve products
Prevent water from draining out of the irrigation
system at the lowest head, eliminating puddling,
erosion and run-off.
• UNI-Spray™ with SAM (R)
• 1800-SAM (R/C)
• 1800-SAM-PRS (R/C)
• 3500-SAM (R)
• 5000-SAM (R/C)
• 5505-SAM (R/C)
• R-50-SAM (R/C)
• 6504-SAM (C)
• 7005-SAM (C)
• 8005-SAM (C)
High efficiency nozzles
Provide uniform distribution of water, eliminating
run-off on slopes or compacted soil and reducing
water usage up to 30%.
• U-Series Nozzles (R/C)
• Rain Curtain™ Nozzles (R/C)
• Rotary Nozzles (R/C)
• 5000/5000 Plus MPR
Nozzles (R/C)
Controllers with multiple
start times
Allow several shorter and more precise run times to
prevent run-off and puddles.
• All Controllers (R/C)
Controllers with
Cycle + Soak ™
Applies water at a rate that the soil can more easily
absorb, reducing erosion, run-off and waste.
• ESP-MC (C)
• IM Controller (C)
Direct-to-plant-root
watering devices
Deliver precise amounts of water at or near plant root
zones for maximum efficiency. By providing nourishment
directly to root systems, water is used more efficiently,
plants are healthier, and run-off and over-spray are
eliminated.
• Landscape Drip/
Xerigation
products (R/C)
• Root Watering
System (R/C)
• Irrigation
Supplement (R/C)
Automatic shut-off devices
Automatically shut off the controller when it is raining
or when sufficient soil moisture is detected, resulting
in water savings of 15-20%.
• Rain Sensor (R/C)
• Moisture Sensor
(R/C)
Controllers with
Rain Delay feature
Postpones the irrigation schedule when watering isn’t
needed and automatically resumes watering when
appropriate.
• ESPLX+/LXi+ (R/C)
• ESP-MC (C)
• Maxicom 2 (C)
• SiteControl (C)
• MDC (C)
Controllers with
Water Budget feature
Provides easy and flexible adjustments to the amount
of water used for irrigation to accommodate seasonal
changes.
• Ec (R)
• ESP Modular (R)
• ESPLX+/LXi+ (R/C)
• ESP-MC (C)
• Maxicom 2 (C)
• SiteControl (C)
• MDC (C)
Controllers with
ET Programming
Enables the controller to apply only the water required
by the landscape to reduce water consumption and
maintain a healthy landscape.
• Maxicom 2 (C)
• SiteControl (C)
Controllers with multiple
independent programs
Offer the flexibility to water various landscape zones at
different times and for varying durations to prevent
water waste.
• Ec (R)
• ESP (R)
• ESP Modular (R)
• ESP-LX+/LXi+ (R/C)
• ESP-MC (C)
• Maxicom 2 (C)
• SiteControl (C)
• MDC (C)
Direct-to-plant-root watering
devices
Offer the flexibility of applying different amounts of
water to plants based on their individual needs.
(due to high pressure)
Run-off
(due to compacted soil,
slopes or over-watering)
Over-watering
(due to weather and
seasonal changes)
Over-watering
(due to varying plant
types and environmental
conditions)
R - Residential applications
R/C - Residential and Commercial applications
2005 – 2006 Catalog
• PRS-Dial (R/C)
• ACV Adjustable
Check Valves
(R/C)
• Maxicom 2 (C)
• SiteControl (C)
• Landscape Drip/
Xerigation
products (R/C)
C - Commercial applications
www.rainbird.com
Introduction
3
Introduction
How to Use This Catalog
The 2003 - 2004 Rain Bird Landscape Irrigation Products Catalog
is designed to provide you with product and application information in a clear, easy-to-use format.
In the “How to Use This Catalog” section, we introduce you to elements you will likely encounter
on specific product pages.
At the beginning of each section, we’ve included product application matrices. These are general
guides to the products’ primary areas of use and are intended to help you choose the right Rain
Bird products for your specific needs.
We have included formulas showing how we calculate precipitation rates, as well as lists of
abbreviations used in the product sections.
Cutaways
Our cutaway illustrations let
you see the unique innovations
and features which make a
specific Rain Bird product the
industry’s best.
Charts
Performance charts with
both standard and metric
measurements give you easy
access to the product
capability information you need.
To convert from Bars to kPa,
use 1 Bar = 100 kPa.
Precipitation Rates
Rain Bird has calculated for you the precipitation rates for our
comprehensive lines of impacts, sprays, and rotors. These rates are
an indication of the approximate rate at which water is being
applied. The equations used to calculate the precipitation rates are
as follows:
▲
■
Square Spacing
U.S.:
PR=96.3 x GPM
SxS
Metric:
PR=1000 x m3/h
SxS
Triangular Spacing
U.S.:
PR=96.3 x GPM
SxL
Metric:
PR=1000 x m3/h
SxL
96.3 = Constant (inches/square foot/hour)
1000 = Constant (millimeter/square meter/hour)
GPM = Gallons per minute (applied to area by sprinklers)
m3/h = Cubic meters per hour (applied to area by sprinklers)
S = Spacing between sprinklers
L = Spacing between rows (S x 0.866)
4
Introduction
www.rainbird.com
2005 – 2006 Catalog
Introduction
Specification Information
The information in this catalog was accurate at the time of printing and may be used for proper
specification of each product. For the most up-to-date information, go to Rain Bird’s web site at
www.rainbird.com.
Abbreviations
The following abbreviations are used throughout this catalog:
Spray Heads
A
Model Designation Only
B
Bubbler or Brass
CST
Center Strip
EST
End Strip
F
Full Circle
FLT
Flat Spray
H
Half-Circle
LA
Low Angle Nozzle
LCS
Left Corner Strip
PCS
Pressure Compensating Screen
PRS
Pressure Regulating Stem
Q
Quarter-Circle
RCS
Right Corner Strip
SAM
Seal-A-Matic™ Check Valve
SLA
Low Angle Stream Spray
SQ
Square
SS
Stream Spray
SST
Side Strip
T
Third-Circle
TQ
Three-Quarter Circle
TT
Two-Third Circle
2005 – 2006 Catalog
Rotors
A
B
FC
Full-Circle
LA
Low Angle Nozzle
PC
Part-Circle
S
Shrub Model
SAM
Internal Stopamatic ®
or Seal-A-Matic™ Check Valve
Impacts
A
ADJ
Adjustable Distance Control
Diffuser Pin
B
DA
Distance Control Flap
FP
Trip (permits full- or part-circle
operation)
LA
Low Angle Nozzle
PJ
Precision Jet Tube
TNT
Bearing Designation
Controllers
SS
Stainless Steel Pedestal Cabinet
WM
Wall Mount Cabinet
Central Controls
SAT
Satellite Controller
SS
Stainless Steel Pedestal Cabinet
TW
Two Wire Communication Path
WM
Wall Mount Cabinet
Note:
1: For all impact sprinklers, stated psi refers to the
operating pressure at the nozzle.
2: For all impact rotor pop-up sprinklers, stated psi
Valves
CP
Contamination Proof
PRS
Pressure Regulating Module
www.rainbird.com
refers to the operating pressure at the base.
3: Precipitation rates are given for reference only.
4: For spacing recommendations, consult your
irrigation specialist.
Introduction
5
Introduction
ASAE Test Certification Statement
Rain Bird Corporation certifies that pressure, flow rate, and radius data for its
products were determined and listed in accordance with ASAE Standard S398.1,
Procedure for Sprinkler Testing and Performance Reporting, and are representative
of performance of production sprinklers at the time of publication. Actual product
performance may differ from the published specifications due to normal
manufacturing variations and sample selection. All other specifcations are solely
the recommendations of Rain Bird Corporation.
Customer Service
At Rain Bird, we believe when
you purchase our products, you
should also receive the support
you need to ensure that they
perform as designed. Like our
products, Rain Bird customer
service is designed to exceed
expectations. When you call with
questions about orders or new
products, you get the support
you need from the top water
management professionals in
the industry – support that
originates from our headquarters in Glendora, California, or
our Customer Service Center in
Tucson, Arizona and is backed
by our vast global network of
distributor-partners.
Worry-Free Warranties
Our comprehensive product
warranties make it even easier
to choose Rain Bird’s solutions
and relax. All Rain Bird’ Turf
products are warranted to the
trade for a period of either three
or five years from the date of
original purchase.
A Rain Bird warranty is the
hassle-free support irrigation
system professionals require
to maintain peak performance.
For you, it’s the added peace
of mind of knowing Rain Bird
is there when you need it.
For details about Rain Bird’s Turf
products, refer to section I on
page 303.
Technical Support
Rain Bird Technical Support has
the answers to all of your
specific product and watermanagement questions. Call our
toll-free Technical Service or
Spec Hotline numbers, or for
maximum convenience, access
the Rain Bird web site via your
personal computer. You’ll get
expert advice and the right
solutions.
Technical Service
1-800-247-3782
Spec Hotline
1-800-458-3005
Internet Address
http://www.rainbird.com
To find the nearest authorized distributor in your area, visit www.rainbird.com
6
Introduction
www.rainbird.com
2005 – 2006 Catalog
Introduction
New Products
New products are located on the following pages:
Spray Heads
Rotary Nozzles
15 foot Right and
Left Center Strip
MPR Nozzles
page 25
U-Series 8 and
10 foot Nozzles
page 32
1800 Series
NP Cover
page 42
Rotary Nozzles
page 50
Rotors
5006 Plus
Stainless Steel
page 64
5000/5000 Plus page 69
MPR Nozzles
5500 Series
Rotors
page 78
TSJ-PRS Series
page 108
Valves
Valve Boxes
page 150
2005 – 2006 Catalog
Universal
page 156
Manifold System
www.rainbird.com
Introduction
7
Introduction
New Products (continued)
Controllers
ESP-MC 28 and page 179
36 Station Models
TBOS 6 Station page 182
Control Module
Wireless
page 190
Rain/Freeze Sensor
Suction Lift Kit
page 228
Landscape Drip / Xerigation®
Low Flow Kits with page 258
Static Wye Filter
page 259
Low Flow Kits
with Self-Cleaning
Back Flush Filter
Back Flush Filter page 265
8
Introduction
Medium Flow
Commercial
Control Zone Kit
page 262
Low Flow
Valve
page 263
Accessories
Basket Filter
page 266
Single Pattern
page 279
Lake Management
Aerators
www.rainbird.com
Multi-Pattern
page 280
Lake Management
Aerators
2005 – 2006 Catalog
Spray Heads
Rotary
Nozzles
Spray Heads
Rotors
Impacts
Valves
®
®
Controllers
Install Confidence.
Install Rain Bird Spray Heads.
™
™
Central
Controls
Commercial Landscape Drip/
Pump Stations
Xerigation®
Accessories
Resources
& Training
Reference
Spray Heads
Major Products
1802
1803
1804
1806
1812
1800
PRS
1800
SAM
1800
SAM-PRS
US-200
US-400
US-600
PA-8S
PA-8S-PRS 1300/1400
Bubblers
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•*
•
•
•*
•
•
•
•
•
•
•
•
•
•*
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Primary Applications
Turfgrass
Slopes
Ground Cover/Shrubs
High Pressure Systems
Low Pressure Systems
High Wind Areas
•
•
•
•
•
•
•
*Optional US-SAM check valve is retrofittable on all UNI-Sprays
10
Spray Heads
www.rainbird.com
2005 – 2006 Catalog
Spray Heads
FAC T
R E P O RT
Install Confidence.
Install Rain Bird®
1800® Spray Heads.
Going head-to-head
against the competition
Rain Bird and competitive spray heads are
routinely subjected to the most stringent
testing procedures in the industry. Test results
from these side-by-side comparisons prove
that Rain Bird 1804 Spray Heads consistently
outperform the competition.*
3
3 Times More Durable
CYCLE SURGE DURABILITY TEST
8000
Install25
25years
yearsof
of unrivaled
unrivaledperformance.
performance.
Install
CYCLES
6000
4000
2000
0
Rain Bird 1804
Trust that when you install
Rain Bird® 1800 Spray Heads, you
can confidently expect that these
products will be more durable
than the competition, will be far
more reliable, and will deliver
superior performance time after
time after time. Here are just
a few reasons why:
2
2 Times More Reliable
ACCELERATED LIFE CYCLE TEST
16,000
Test Stopped
12,000
■ Constructed of time-proven UV-resistant
plastic and corrosion-resistant stainless
steel parts, assuring long product life.
than any other manufacturer—plus a
complete range of pop-up heights with
SAM and PRS features.
Rain Bird’s commitment to product
quality and assures customer peace
of mind.
■ Proven co-molded wiper seal that
completely eliminates a potential leak
path (between the cap and seal),
retains its shape cycle after cycle, and
has the lowest “flow-by” which allows
more heads to be installed on the
same valve.
■ Advanced ratchet mechanism employs
a separate adjustment ring which
prevents wear and reliably maintains
alignment.
www.rainbird.com
8,000
4,000
■ 71 different nozzles available—more
■ Five-year trade warranty reinforces
2005 – 2006 Catalog
Competitor B
Cycle Surge is a measure of material endurance.
Spray heads continuously cycled at 200 psi (14 bars),
3 seconds on, 2 seconds off.
CYCLES
1800 Series
2", 3", 4", 6", 12"
(5,1; 7,6; 10,2; 15,2; 30,5 cm).
PRS and SAM options available
on 4", 6", 12" models (10,2;
15,2; 30,5 cm).
Competitor A
S P R AY H E A D
0
Rain Bird 1804
Competitor A
Competitor B
S P R AY H E A D
The Accelerated Life Cycle Test is a measure of reliability.
Spray heads continuously cycled at 90 psi (6,3 bars),
30 seconds on, 30 seconds off.
1
#1 in Performance
■ The Rain Bird 1800-SAM Series outperforms
all competitors with an average hold back
of 14 feet (4,3 m).
■ The Rain Bird 1800-PRS Series maintains
a more consistent outlet pressure of 30 psi
(2,1 bars), across a wider range of inlet
pressures than the competition.
* Based on tests conducted at Rain Bird’s Product
Research Center in Glendora, CA. Test results reflect a
comparison of Rain Bird’s products with those of its
principal competitors.
Spray Heads
11
Spray Heads
■ Radius reduction screw
Install
the
proof.
Install the proof.
■ Plastic MPR nozzle and screen
■ Proven Rain Bird® co-molded,
pressure-activated wiper seal
■ Cycle surge durability test results prove the
Rain Bird 1804 Spray Head is more than three times
stronger than the competition. The 1804 Spray Head
lasted an average of 7,338 cycles while Competitor A
■ Strong stainless steel spring
provides reliable stem retraction
lasted an average of only 2,295 cycles and Competitor
B lasted an average of only 1,709 cycles.
■ Accelerated life cycle test results prove the Rain Bird
1804 Spray Head is more than twice as reliable as
the competition. All 1804 Spray Heads tested were
still operating after 14,400 cycles. Competitor A started failing at 4,330 cycles and Competitor B started
■ Side and bottom inlets featured
on 1806 and 1812 models
failing at 6,325 cycles.
■ 25 years of testing and in-field installations prove
■ Patented PRS in-stem pressure
regulator option
that the Rain Bird 1800-SAM-PRS Series delivers
unsurpassed performance when compared to its
competition. The 1800-SAM Series prevents drainage
from spray heads installed at lower elevations, which
conserves water and eliminates landscape damage
due to flooding and/or erosion. The 1800-PRS Series
■ Advanced Ratchet mechanism
with separate adjustment ring
■ SAM (Seal-A-Matic ) in-stem
check valve option
™
ensures optimal system performance and restricts
water loss by up to 70% if the nozzle is removed or
damaged.
Rain Bird 1800®-PRS Spray Heads—with a patented pressure regulator
built into the stem—provide the following benefits.
■ Balances lateral line pressure to ensure the outlet pressure at each
spray head is a constant 30 psi—the result is the even distribution of
water from each spray head.
■ Ends misting and fogging by regulating incoming pressure to an optimal 30 psi at the nozzle—the result is a reduction in the use of water.
■ Reduces water loss by 70% if the nozzle is removed or damaged—the
result is a reduction in property damage due to flooding.
With PRS
Without PRS
Restricts water loss up to 70% if
nozzle is removed or damaged
12
Spray Heads
www.rainbird.com
2005 – 2006 Catalog
Spray Heads
Expanded line now
includes
FAC T
8' and 10'
R E P O RT
Nozzles
Install Confidence.
Install Rain Bird
U-Series Nozzles.
™
™
®
®
Planto
touse
use30%
30%less
less water.*
water.*
Plan
You can confidently expect that when you install patented U-Series
nozzles from Rain Bird® you will reduce watering run times which in
turn conserves water and saves money. Water- and money-savings
result from the most uniform water distribution available for spray
heads. This is the only plastic nozzle with a dual-orifice** design that
efficiently delivers superior close-in watering and even water
distribution across the entire radius range.
■ Water flowing from both orifices*
eliminates gaps for more
uniform coverage
■ Matched precipitation rates across
pattern and radii with U-Series, MPR
and VAN nozzles provide flexibility in
design and installation
2005 – 2006 Catalog
■ An easy, cost-effective retrofit solu-
tion to eliminate dry spots around the
spray heads
■ New 8' and 10' (2,4 m 3,1 m) nozzles
in Q, T, H, and F patterns expand the
U-Series product line that also
includes 12' and 15' (3,4 m and 4,6 m)
nozzles in standard patterns
www.rainbird.com
■ U-Series nozzles fit all Rain Bird spray
heads and shrub adapters, and can be
used with Rain Bird PCS screens
* When U-Series dual orifice nozzles are installed instead of
standard nozzles on every spray head in the zone. Results may
vary based on site-specific conditions such as sprinkler spacing,
wind, temperature, soil and grass type.
** Not applicable for single orifice full-circle nozzles. These nozzles
form larger water droplets with a lower trajectory, which resist
wind and eliminate watering gaps for more uniform distribution.
Spray Heads
13
Spray Heads
Advancednozzle
nozzletechnology
technology
Advanced
assuressuperior
superiorwater
waterdistribution.
distribution.
assures
Going head-to-head
against the competition.
Rain Bird® U-Series nozzles produce
spray patterns from two orifices to
form a continuous water stream.
The result is that gaps in coverage are
eliminated so the entire watering area
is more uniformly covered.
The benefit of Rain Bird® U-Series nozzles is clearly visible
in side-by-side comparisons with standard, single-orifice
spray nozzles. The second orifice on the U-Series allows for
superior close-in watering. With the efficiency of U-Series
nozzles, you may reduce watering times by more than 30%.
Refer to the example on the left to see how. U-Series nozzles
have the lowest scheduling coefficient available in a spray
head nozzle.
2
2
1
3
What is Scheduling Coefficient?
Scheduling Coefficient (SC) is a measure of irrigation
uniformity developed for turf grass.
4
■ SC measures how much more you must water the
entire area for the driest sections to receive sufficient water.
■ The lower the SC, the better the spray head
U-Series nozzles (right), with an additional orifice for close-in
watering, minimize dry spots around the spray head for more
uniform coverage throughout the entire watering area.
nozzle distributes water.
This example uses a 675 square foot (53 m2)
turf grass area in Southern California.
The following example shows the time- and water-saving
advantages of installing Rain Bird® U-Series nozzles instead
of standard spray head nozzles.
Watering time needed with standard
spray head nozzles
52 minutes/week
Watering time needed with
U-Series nozzles
36 minutes/week
Time Saved
16 minutes/week
1
Patented U-Series
Water flowing from both orifices results in a lower scheduling
coefficient. This efficient design conserves water, saves
money and reduces waste.
2
A 30% reduction in watering time!
Multiplied by: Spray zone flow
10.4 gpm
Multiplied by: Watering weeks/year
46
Gallons Saved Per Year
7,654
To calculate your own savings please visit
www.rainbird.com/calculators/index.htm.
“We use the U-Series nozzles because of the close-in
watering and great uniformity.We know in the long
run they will save the client money.”
Ed Palladino
HRP LANDESIGN
Santa Ana, California
14
Spray Heads
Competitor A
Competitor B
Competitor A and B nozzles fail to provide efficient
close-in watering which results in a higher scheduling
coefficient.
Your results may vary based on site-specific conditions such as sprinkler spacing, wind,
temperature, soil and grass type.
Not applicable for single orifice full-circle nozzles. These nozzles form larger water
droplets with a lower trajectory, which resist wind and eliminate watering gaps for more
uniform distribution.
3
Based on tests conducted at Rain Bird’s Product Research Center in Glendora, CA. Tests
conducted on Rain Bird and principal competitors’ part circle nozzles.
4
Certified Landscape Irrigation Auditor Manual, The Irrigation Association, August 2000.
1
2
www.rainbird.com
2005 – 2006 Catalog
Spray Heads
Pop-Up Spray Heads
1800 Series
®
2", 3", 4", 6", 12" (5,1 cm; 7,6 cm; 10,2 cm; 15,2 cm; 30,5 cm)
Primary Application
1800 Series Spray Heads have first-rate quality built in for reliable
operation and long life. Their superior components and features
make them the spray heads of choice for a wide variety of
applications.
Dimensions/Models
• 1⁄ 2" (15/21) NPT female threaded inlet
• Models and height:
1802: 4" (10,2 cm) body height; 2" pop-up height (5,1 cm)
1803: 4 7⁄ 8" (12,4 cm) body height; 3" pop-up height (7,6 cm)
Features
• Co-molded wiper seal features an encased plastic “cage” to provide
1806: 9 3⁄ 8" (23,8 cm) body height; 6" pop-up height (15,2 cm)
unmatched resistance to grit, pressure and the environment.
Additionally, the pressure-activated, multi-function seal design
• Exposed surface diameter: 2 1⁄ 4" (5,7 cm)
assures a positive seal without excess “flow-by” which enables
more heads to be installed on the same valve.
Radius reduction screw
• Precision controlled flush at pop-down clears debris from unit,
assuring positive stem retraction in all soil types.
Plastic MPR nozzle and screen
• Strong stainless steel spring provides reliable stem retraction.
Co-molded, pressure-activated wiper seal
• Two-piece ratchet mechanism on all models allows easy nozzle
pattern alignment and provides added durability.
• Pre-installed orange 1800 Pop-Top™ flush plug blocks debris, larger
than nozzle filter screen openings, from entering after flushing.
Strong stainless steel retract spring
Allows for easy nozzle installation.
• Constructed of time-proven UV-resistant plastic and corrosion
resistant stainless steel parts, assuring long product life.
• All sprinkler components are removable from the top without
special tools, providing for quick and easy flushing and
maintenance of the sprinkler.
• Side and bottom inlets featured on 1806 and 1812 models.
• Five-year trade warranty.
Side inlet on 1806 and 1812 models
Operating Range
• Spacing: 3 to 20 feet (0,9 to 6,1 m)
• Pressure: 15 to 70 psi (1,0 to 4,8 bars)
Patented PRS in-stem pressure regulator option
Two-Piece
Ratchet
Adjustment Ring
(for easy nozzle
pattern
alignment
and durability)
SAM
(Seal-A-Matic ™)
in-stem check
valve option
1804- 15H
How to Specify
Specifications
• Flow-by: 0 at 8 psi (0,6 bar) or greater;
0.10 GPM (0,02 m 3/h; 0,006 l/s) otherwise
Nozzle Series/Pattern
15H
15 Series
MPR nozzle with
half-circle pattern
Model
1804
4" (10,2 cm) pop-up height
1800 Series
2005 – 2006 Catalog
www.rainbird.com
Spray Heads
15
Spray Heads
Seal-A-Matic™ Pop-Up Spray Heads
Pressure Regulating Pop-Up Spray Sprinklers
1800 -SAM Series
1800 -PRS Series
4", 6", 12" (10,2 cm, 15,2 cm, 30,5 cm)
4", 6", 12" (10,2 cm, 15,2 cm, 30,5 cm)
Primary Application
Ideal for use in areas with changing elevations, the 1800 SAM
Series offers all 1800 Series features plus:
Primary Application
Designed for areas with high and/or widely fluctuating water
pressures, the 1800 PRS Series has all 1800 Series features plus:
®
®
Features
• Built-in Seal-A-Matic™ (SAM) check valve. Eliminates the need for
under-the-head check valves. No parts to be installed at the site.
• Traps water in lateral pipes in elevation changes of up to 14 feet
(4,2 m). Reduces wear on system components by minimizing
water hammer during start-up.
• Prevents drainage from spray heads at lower elevations. Stops water
waste. Ends landscape damage due to flooding and/or erosion.
• Even stronger retract spring to accommodate elevation changes
up to 14 feet (4,2 m). One of the strongest springs in the industry.
• Designed for use with all Rain Bird plastic spray head nozzles.
• “SAM” stamped on cap for easy identification and maintenance.
Operating Range
•Spacing: 3 to 20 feet (0,9 to 6,1 m)
Specifications
• SAM capability: holds up to 14 feet (4,2 m) of head; 6 psi (0,4 bar)
• Flow-by: 0 at 8 psi (0,6 bar) or greater; 0.50 GPM
(0,11 m 3/h; 0,03 l/s) otherwise
• SAM operable only when installed by bottom inlet
Dimensions
• 1⁄ 2" (15/21) female threaded inlets
• Body height:
1804 SAM: 6" (15,2 cm)
1806 SAM: 9 3⁄ 8" (23,8 cm)
1812 SAM: 16" (40,6 cm)
• Exposed surface diameter:
2 1⁄ 4" (5,7 cm)
Features
• Patented PRS pressure regulator built into the stem. No parts to be
installed at the site. Saves time and money.
• Maintains constant outlet pressure at 30 psi (2,1 bars). Spray heads
and nozzles perform best at 30 psi. Ensures maximum spray head
and nozzle performance, even with varying inlet pressures.
Maintains constant pressure regardless of nozzle used.
• Restricts water loss by up to 70% if nozzle is removed or damaged.
Saves water and money. Reduces possibility of accidents and
property damage. Recommended for vandal prone areas.
• Ends misting and fogging caused by high pressure. Stops water
waste. Ensures necessary watering occurs in high pressure or wind
conditions.
• Designed for use with all Rain Bird plastic spray head nozzles.
• “PRS” stamped on cap for easy identification and maintenance.
Operating Range
Specifications
• Regulates nozzle pressure to an average 30 psi (2,1 bars) with inlet
pressures of up to 70 psi (5,0 bars) (see graph)
• Flow-by: 0 at 8 psi (0,6 bar) or greater; 0.10 GPM
(0,02 m 3/h; 0,006 l/s) otherwise
• Installation: side or bottom inlet
• Side inlet installation not recommended in freezing climates
Models
• 1804 SAM: 4" pop-up height (10,2 cm)
16
Spray Heads
www.rainbird.com
2005 – 2006 Catalog
Spray Heads
Pressure Regulating Seal-A-Matic™
Pop-Up Spray Heads
1800®-SAM-PRS Series
4", 6", 12" (10,2 cm, 15,2 cm, 30,5 cm)
Dimensions
• Body height:
1804 PRS: 6" (15,2 cm)
1806 PRS: 9 3⁄ 8" (23,8 cm)
1812 PRS: 16" (40,6 cm)
Primary Application
Meets the needs of all spray areas, regardless of changing elevation
or water pressures. Incorporates all 1800 Series SAM and PRS
features. “SAM-PRS” stamped on the cap for easy identification
and maintenance.
SAM
Operating Range
Models
• 1804 PRS: 4" pop-up height (10,2 cm)
Specifications
• SAM capability: holds up to 14 feet (4,2 m) of head;
6 psi (0,4 bar)
0.50 GPM (0,11 m 3/h; 0,03 l/s) otherwise
• SAM installation operable only when installed by bottom inlet
PRS
1800-PRS Performance
metric
standard
Without PRS
50
Nozzle Pressure (psi)
Dimensions
• Body height:
1804 SAM-PRS: 6" (15,2 cm)
1806 SAM-PRS: 9 3⁄ 8" (23,8 cm)
1812 SAM-PRS: 16" (40,6 cm)
40
30
With PRS
20
10
0
20 30
40 50
60
70
Models
• 1804 SAM-PRS: 4" pop-up height (10,2 cm)
SAM-PRS
Inlet Pressure (psi)
Recommended Operating
Pressure Range: 35-70 psi
1800-PRS Performance
METRIC
3,5
Without PRS
2,8
1804- SAM-PRS- 12Q
2,1
With PRS
1,4
0,7
0
How to Specify
Nozzle Pressure (bars)
standard
1,4 2,1 2,8 3,5 4,1 4,8
Inlet Pressure (bars)
Recommended Operating
Pressure Range: 2,4-4,8 bars
Optional
Feature
SAM-PRS
Seal-A-Matic
check valve
and in-stem
pressure
regulation
Model
1804
4" (10,2 cm)
pop-up
height
Nozzle Series
Pattern
12Q
12 Series
Plastic MPR
nozzle with
quarter-circle
pattern
Performance data derived from tests that conform with ASAE Standards; ASAE S398.1.
See page 6 for complete ASAE Test Certification Statement.
2005 – 2006 Catalog
www.rainbird.com
Spray Heads
17
Spray Heads
Universal Spray Heads
UNI-Spray™ Series
2", 4", 6" (5,1 cm, 10,2 cm, 15,2 cm)
Radius reduction screw
Primary Application
The UNI-Spray™ is designed for those applications where flexibility
and convenience are primary considerations. These reliable,
compact spray heads are shipped with or without pre-installed
Variable Arc Nozzles (VANs) that are adjustable from 0° to full circle
operation, saving hours of installation time, effort and money.
Removable variable arc
(VAN) nozzle and screen
Pressure-activated,
multi-functional wiper seal
Features
• Pressure-activated, wiper seal prevents excessive flow-by and
water waste. Keeps debris from entering upon retraction.
• Durable two-piece stem ratchet allows for quick and easy nozzle
pattern alignment.
• Internal parts removable from the top of the sprinkler for
easy servicing.
• Small exposed cover makes the unit virtually invisible for more
attractive landscapes.
• Rugged cover and body provide durability in high pressure and
surge conditions.
• Plastic and stainless steel materials resist corrosion.
• Economical, 6-inch (15,2 cm) pop-up model provides for
unobstructed watering of today’s taller turf grass varieties.
• VAN nozzle and screen are easily removable for flushing.
• UNI-Spray™ accepts all Rain Bird ® nozzles and accessories, which
simplifies inventory management.
• Optional field installable Seal-A-Matic™ check valve prevents low
head drainage up to 8 feet (2,4 m) of elevation difference.
Rugged ABS cover and body
Strong stainless steel
retract spring
Optional Seal-A-Matic™
check valve (US-SAM)
Two-piece ratchet
US - 4 - 15VAN
Model
UNI-Spray
Nozzle Series/Pattern
VAN nozzle with
variable arc
How to Specify
Body
4"
(10,2 cm)
UNI-Spray
18
Spray Heads
Variable Arc Nozzles
(10, 12, 15 or 18 feet) may be
ordered pre-installed
www.rainbird.com
2005 – 2006 Catalog
Spray Heads
Operating Range (for pre-installed nozzle choices)
• Spacing: 10 VAN Series: 8 to 10 feet (2,4 to 3,0 m)
• 12 VAN Series: 10 to 12 feet (3,0 to 3,7 m)
• Optimum Pressure: 30 psi (2 bars)
• Adjustable nozzle arc range: 0° - 360°
Specifications
0.20 GPM (0,04 m3/h; 0,01 l/s) otherwise
Dimensions
•1⁄ 2" (15/21) NPT female threaded inlet
• Body height:
US-200: 3 3⁄ 4" (9,5 cm)
US-400: 5 7⁄ 8" (14,9 cm)
US-600: 81⁄ 4" (21,0 cm)
• Exposed surface diameter: 11⁄ 4" (3,2 cm)
Models*
• US-200: 2" pop-up height (5,1 cm)
• US-210 VAN 2" pop-up height (5,1 cm) with 10-VAN attached
• US-SAM UNI-Spray™ field installed check valve
* The UNI-Spray™ sprinkler body accepts all Rain Bird nozzles.
2005 – 2006 Catalog
www.rainbird.com
Spray Heads
19
Spray Heads
Matched Precipitation Rate Nozzles
Plastic MPR Nozzles
Primary Application
Matched Precipitation Rate (MPR) nozzles simplify the design
process by allowing sprinklers with various arcs and radii to be
mixed on the same circuit. Fit all Rain Bird spray heads and shrub
adapters.
Features
• Matched precipitation rates across sets and across patterns in
5 Series, 8 Series, 10 Series, 12 Series, and 15 Series for
even water distribution and design flexibility.
• 5 Series nozzles meet small-area shrub or turf requirements.
• 8 Series nozzles now have a lower water flow which allows more
spray heads per zone.
• 1800 Series white filter (.035" x .035") screens (shipped with
nozzles) maintain precise radius adjustment and prevent clogging.
(5 and 8 Series nozzles are shipped with blue fine-mesh
(.02" x .02") filter screens.)
• Stainless steel adjustment screw to adjust flow and radius.
Operating Range
• Pressure: 15 to 30 psi (1 to 2,1 bars)
• Optimum pressure: 30 psi (2,1 bars)*
* Rain Bird recommends using 1800 PRS spray heads
to maintain optimum nozzle performance in higher
pressure situations.
Models
• 5 Series
• 5 Series: bubbler nozzles
• 8 Series
• 8 FLT Series
• 10 Series
• 12 Series
• 15 Series
• 15 Strip Series
• 16 Series: stream spray
• 22 Series: standard stream spray
Re-sealable Nozzle Packaging
Features
• Convenient re-sealable bags
• Separate, detachable nozzle and
screen pouches
• Tamper proof seal
• Hanging holes for easy display
MPR Nozzle & Screen
20
Spray Heads
www.rainbird.com
2005 – 2006 Catalog
Spray Heads
5 Series MPR
5° Trajectory
■
▲
METRIC
5° Trajectory
■
▲
Nozzle
Pressure Radius
psi
ft.
Flow
GPM
Precip
In/h
Precip
In/h
Nozzle
Pressure Radius
bars
m
Flow
m3⁄h
Precip
mm/h
Precip
mm/h
5F
15
20
25
30
15
20
25
30
15
20
25
30
15
20
25
30
0.29
0.33
0.37
0.41
0.14
0.16
0.18
0.20
0.09
0.11
0.12
0.13
0.07
0.08
0.09
0.10
2.07
2.01
1.62
1.58
2.07
2.01
1.62
1.58
2.07
2.01
1.62
1.58
2.07
2.01
1.62
1.58
2.39
2.32
1.87
1.83
2.39
2.32
1.87
1.83
2.39
2.32
1.87
1.83
2.39
2.32
1.87
1.83
5F
1,0
1,5
2,0
2,1
1,0
1,5
2,0
2,1
1,0
1,5
2,0
2,1
1,0
1,5
2,0
2,1
0,06
0,08
0,09
0,09
0,03
0,04
0,04
0,05
0,02
0,02
0,03
0,03
0,02
0,02
0,02
0,02
52
47
41
40
52
47
41
40
52
47
41
40
52
47
41
40
60
55
48
46
60
55
48
46
60
55
48
46
60
55
48
46
5H
5T
5Q
3
4
4
5
3
4
4
5
3
4
4
5
3
4
4
5
5H
5T
5Q
1,1
1,3
1,5
1,5
1,1
1,3
1,5
1,5
1,1
1,3
1,5
1,5
1,1
1,3
1,5
1,5
Note: All MPR nozzles tested on 4" (10,2 cm) pop-ups.
■ Square spacing based on 50% diameter of throw.
▲ Triangular spacing based on 50% diameter of throw.
Performance data taken in zero wind conditions.
Note: Specify spray head body and nozzles separately. Refer to Price List for
shipping unit quantities.
Note: Radius reduction over 25% of the normal throw of the nozzle is not
recommended.
2005 – 2006 Catalog
www.rainbird.com
Spray Heads
21
Spray Heads
8 Series MPR
METRIC
10° Trajectory
10° Trajectory
■
▲
Nozzle
Pressure Radius Flow
psi
ft.
GPM
Precip
In/h
Precip
In/h
Nozzle
bars
m
m3⁄h
Flow
l/s
Precip Precip
mm/h mm/h
8F
15
20
25
30
15
20
25
30
15
20
25
30
15
20
25
30
2.07
2.01
1.62
1.58
2.07
2.01
1.62
1.58
2.07
2.01
1.62
1.58
2.07
2.01
1.62
1.58
2.39
2.32
1.87
1.83
2.39
2.32
1.87
1.83
2.39
2.32
1.87
1.83
2.39
2.32
1.87
1.83
8F
1,0
1,5
2,0
2,1
1,0
1,5
2,0
2,1
1,0
1,5
2,0
2,1
1,0
1,5
2,0
2,1
0,05
0,05
0,06
0,07
0,02
0,03
0,03
0,03
0,02
0,02
0,02
0,02
0,01
0,01
0,01
0,02
52
47
41
40
52
47
41
40
52
47
41
40
52
47
41
40
60
55
48
46
60
55
48
46
60
55
48
46
60
55
48
46
■
▲
■
▲
8H
8T
8Q
5
6
7
8
5
6
7
8
5
6
7
8
5
6
7
8
0.74
0.86
0.96
1.05
0.37
0.42
0.47
0.52
0.25
0.29
0.32
0.35
0.18
0.21
0.24
0.26
8H
8T
8Q
■
1,7
2,1
2,4
2,4
1,7
2,1
2,4
2,4
1,7
2,1
2,4
2,4
1,7
2,1
2,4
2,4
0,16
0,20
0,23
0,24
0,08
0,10
0,12
0,12
0,05
0,07
0,08
0,08
0,04
0,05
0,06
0,06
▲
10 Series MPR
15° Trajectory
METRIC
15° Trajectory
Nozzle
Pressure Radius
psi
ft.
Flow
GPM
Precip
In/h
Precip
In/h
Nozzle
bars
m
m3⁄h
Flow
l/s
Precip Precip
mm/h mm/h
10F
15
20
25
30
15
20
25
30
15
20
25
30
15
20
25
30
1.16
1.30
1.44
1.58
0.58
0.65
0.72
0.79
0.39
0.43
0.48
0.53
0.29
0.33
0.36
0.39
2.28
1.96
1.71
1.52
2.28
1.96
1.71
1.52
2.28
1.96
1.71
1.52
2.28
1.96
1.71
1.52
2.63
2.26
1.98
1.75
2.63
2.26
1.98
1.75
2.63
2.26
1.98
1.75
2.63
2.26
1.98
1.75
10F
1,0
1,5
2,0
2,1
1,0
1,5
2,0
2,1
1,0
1,5
2,0
2,1
1,0
1,5
2,0
2,1
0,07
0,08
0,10
0,10
0,04
0,04
0,05
0,05
0,03
0,03
0,03
0,03
0,02
0,02
0,03
0,03
58
50
39
37
58
50
39
37
58
50
39
37
58
50
39
37
10H
10T
10Q
7
8
9
10
7
8
9
10
7
8
9
10
7
8
9
10
10H
10T
10Q
2,1
2,4
3,0
3,1
2,1
2,4
3,0
3,1
2,1
2,4
3,0
3,1
2,1
2,4
3,0
3,1
0,26
0,29
0,35
0,36
0,13
0,14
0,18
0,18
0,09
0,10
0,12
0,12
0,06
0,07
0,09
0,09
67
58
45
43
67
58
45
43
67
58
45
43
67
58
45
43
Note: Radius reduction over 25% of the normal throw of the nozzle is not recommended.
22
Spray Heads
www.rainbird.com
2005 – 2006 Catalog
Spray Heads
12 Series MPR
METRIC
30° Trajectory
■
▲
30° Trajectory
■
▲
Nozzle
Pressure Radius
psi
ft.
Flow
GPM
Precip
In/h
Precip
In/h
Nozzle
bars
m
m3⁄h
Flow
l/s
Precip Precip
mm/h mm/h
12F
15
20
25
30
15
20
25
30
15
20
25
30
15
20
25
30
15
20
25
30
15
20
25
30
1.80
2.10
2.40
2.60
1.35
1.58
1.80
1.95
1.20
1.40
1.60
1.74
0.90
1.05
1.20
1.30
0.60
0.70
0.80
0.87
0.45
0.53
0.60
0.65
2.14
2.02
1.91
1.74
2.14
2.02
1.91
1.74
2.14
2.02
1.91
1.74
2.14
2.02
1.91
1.74
2.14
2.02
1.91
1.74
2.14
2.02
1.91
1.74
2.47
2.34
2.21
2.01
2.47
2.34
2.21
2.01
2.47
2.34
2.21
2.01
2.47
2.34
2.21
2.01
2.47
2.34
2.21
2.01
2.47
2.34
2.21
2.01
12F
1,0
1,5
2,0
2,1
1,0
1,5
2,0
2,1
1,0
1,5
2,0
2,1
1,0
1,5
2,0
2,1
1,0
1,5
2,0
2,1
1,0
1,5
2,0
2,1
0,11
0,14
0,16
0,16
0,09
0,10
0,12
0,12
0,08
0,09
0,11
0,11
0,06
0,07
0,08
0,08
0,04
0,05
0,05
0,05
0,03
0,03
0,04
0,04
55
47
46
44
55
47
46
44
55
47
46
44
55
47
46
44
55
47
46
44
55
47
46
44
12TQ
12TT
12H
12T
12Q
9
10
11
12
9
10
11
12
9
10
11
12
9
10
11
12
9
10
11
12
9
10
11
12
12TQ
12TT
12H
12T
12Q
2,7
3,2
3,6
3,7
2,7
3,2
3,6
3,7
2,7
3,2
3,6
3,7
2,7
3,2
3,6
3,7
2,7
3,2
3,6
3,7
2,7
3,2
3,6
3,7
0,40
0,48
0,59
0,60
0,30
0,36
0,45
0,45
0,26
0,32
0,40
0,40
0,20
0,24
0,30
0,30
0,13
0,16
0,20
0,20
0,10
0,12
0,15
0,15
63
54
53
51
63
54
53
51
63
54
53
51
63
54
53
51
63
54
53
51
63
54
53
51
recommended.
2005 – 2006 Catalog
www.rainbird.com
Spray Heads
23
Spray Heads
15 Series MPR
METRIC
30° Trajectory
■
▲
30° Trajectory
■
▲
Nozzle
Pressure Radius
psi
ft.
Flow
GPM
Precip
In/h
Precip
In/h
Nozzle
bars
m
m3⁄h
Flow
l/s
Precip Precip
mm/h mm/h
15F
15
20
25
30
15
20
25
30
15
20
25
30
15
20
25
30
15
20
25
30
15
20
25
30
2.60
3.00
3.30
3.70
1.95
2.25
2.48
2.78
1.74
2.01
2.21
2.48
1.30
1.50
1.65
1.85
0.87
1.00
1.10
1.23
0.65
0.75
0.82
0.92
2.07
2.01
1.62
1.58
2.07
2.01
1.62
1.58
2.07
2.01
1.62
1.58
2.07
2.01
1.62
1.58
2.07
2.01
1.62
1.58
2.07
2.01
1.62
1.58
2.39
2.32
1.87
1.83
2.39
2.32
1.87
1.83
2.39
2.32
1.87
1.83
2.39
2.32
1.87
1.83
2.39
2.32
1.87
1.83
2.39
2.32
1.87
1.83
15F
1,0
1,5
2,0
2,1
1,0
1,5
2,0
2,1
1,0
1,5
2,0
2,1
1,0
1,5
2,0
2,1
1,0
1,5
2,0
2,1
1,0
1,5
2,0
2,1
0,16
0,19
0,23
0,23
0,12
0,15
0,17
0,18
0,11
0,13
0,15
0,16
0,08
0,10
0,11
0,12
0,05
0,07
0,08
0,08
0,04
0,05
0,06
0,06
52
47
41
40
52
47
41
40
52
47
41
40
52
47
41
40
52
47
41
40
52
47
41
40
15TQ
15TT
15H
15T
15Q
11
12
14
15
11
12
14
15
11
12
14
15
11
12
14
15
11
12
14
15
11
12
14
15
15TQ
15TT
15H
15T
15Q
3,4
3,9
4,5
4,6
3,4
3,9
4,5
4,6
3,4
3,9
4,5
4,6
3,4
3,9
4,5
4,6
3,4
3,9
4,5
4,6
3,4
3,9
4,5
4,6
0,60
0,72
0,84
0,84
0,45
0,54
0,63
0,63
0,40
0,48
0,55
0,56
0,30
0,36
0,42
0,42
0,20
0,24
0,28
0,28
0,15
0,18
0,21
0,21
60
55
48
46
60
55
48
46
60
55
48
46
60
55
48
46
60
55
48
46
60
55
48
46
recommended.
24
Spray Heads
www.rainbird.com
2005 – 2006 Catalog
Spray Heads
15 Strip Series
METRIC
30° Trajectory
30° Trajectory
Nozzle
Pressure
psi
WxL
ft.
Flow
GPM
Nozzle
Pressure
bars
WxL
m
Flow
m3⁄h
Flow
l/s
15SQ
15
20
25
30
15
20
25
30
15
20
25
30
15
20
25
30
15
20
25
30
15
20
25
30
15
20
25
30
18 x 18
19 x 19
21 x 21
23 x 23
4 x 13
4 x 14
4 x 14
4 x 15
4 x 26
4 x28
4x 28
4 x 30
3 x 11
3 x 12
4 x 14
4 x 15
3 x 11
3 x 12
4 x 14
4 x 15
4 x 26
4 x 28
4 x 28
4 x 30
9 x 15
9 x 16
9 x 18
9 x 18
2.68
3.06
3.42
3.73
0.45
0.50
0.56
0.61
0.89
1.00
1.11
1.21
0.35
0.40
0.45
0.49
0.35
0.40
0.45
0.49
0.89
1.00
1.11
1.21
1.34
1.47
1.60
1.73
15SQ
1,0
1,5
2,0
2,1
1,0
1,5
2,0
2,1
1,0
1,5
2,0
2,1
1,0
1,5
2,0
2,1
1,0
1,5
2,0
2,1
1,0
1,5
2,0
2,1
1,0
1,5
2,0
2,1
5,5 x 5,5
5,8 x 5,8
6,4 x 6,4
7,0 x 7,0
1,2 x 4,0
1,2 x 4,3
1,2 x 4,3
1,2 x 4,6
1,2 x 7,9
1,2 x 8,5
1,2 x 8,5
1,2 x 9,2
0,8 x 3,2
1,0 x 3,9
1,2 x 4,5
1,2 x 4,6
0,8 x 3,2
1,0 x 3,9
1,2 x 4,5
1,2 x 4,6
1,2 x 7,9
1,2 x 8,5
1,2 x 8,5
1,2 x 9,2
2,7 x 4,6
2,7 x 4,9
2,7 x 5,5
2,7 x 5,5
0,61
0,69
0,78
0,85
0,10
0,11
0,13
0,14
0,20
0,23
0,25
0,27
0,08
0,09
0,11
0,11
0,08
0,09
0,11
0,11
0,20
0,23
0,25
0,27
0,30
0,33
0,36
0,39
0,17
0,19
0,22
0,23
0,03
0,03
0,04
0,04
0,06
0,06
0,07
0,08
0,02
0,03
0,03
0,03
0,02
0,03
0,03
0,03
0,06
0,06
0,07
0,08
0,08
0,09
0,10
0,11
15EST
15CST
15RCS
15LCS
15SST
9SST
NEW
NEW
15EST
15CST
15RCS
15LCS
15SST
9SST
NEW
NEW
W = Width of coverage pattern L = Length of coverage pattern
Note: Specify spray head body and nozzles separately.
Refer to Price List for shipping unit quantities.
Note: Radius reduction over 25% of the normal throw of the nozzle is
not recommended.
2005 – 2006 Catalog
www.rainbird.com
Spray Heads
25
Spray Heads
16 Series MPR
15° Trajectory
METRIC
Nozzle
Pressure
psi
Radius
ft.
Flow
GPM
Nozzle
Pressure
bars
Radius
m
Flow
m3⁄h
Flow
l/s
16 F-SLA
15
20
25
30
15
20
25
30
15
20
25
30
13
14
15
16
13
14
15
16
13
14
15
16
2.37
2.66
2.96
3.22
1.18
1.33
1.48
1.61
0.59
0.67
0.74
0.81
16F-SLA
1,0
1,5
2,0
2,1
1,0
1,5
2,0
2,1
1,0
1,5
2,0
2,1
4,0
4,3
4,6
4,9
4,0
4,3
4,6
4,9
4,0
4,3
4,6
4,9
0,54
0,60
0,67
0,73
0,27
0,30
0,34
0,37
0,13
0,15
0,17
0,18
0,15
0,17
0,19
0,20
0,07
0,08
0,09
0,10
0,04
0,04
0,05
0,05
16H-SLA
16Q-SLA
16H-SLA
16Q-SLA
22 Series MPR
METRIC
35° Trajectory
Nozzle
Pressure
psi
Radius
ft.
Flow
GPM
Nozzle
Pressure
bars
Radius
m
Flow
m3⁄h
Flow
l/s
22F-SS
15
20
25
30
15
20
25
30
15
20
25
30
17
18
19
20
17
18
19
20
17
18
19
20
2.37
2.66
2.96
3.22
1.18
1.33
1.48
1.61
0.59
0.67
0.74
0.81
22F-SS
1,0
1,5
2,0
2,1
1,0
1,5
2,0
2,1
1,0
1,5
2,0
2,1
5,2
5,5
5,8
6,1
5,2
5,5
5,8
6,1
5,2
5,5
5,8
6,1
0,54
0,60
0,67
0,73
0,27
0,30
0,34
0,37
0,13
0,15
0,17
0,18
0,15
0,17
0,19
0,20
0,07
0,08
0,09
0,10
0,04
0,04
0,05
0,05
22H-SS
22Q-SS
22H-SS
22Q-SS
Note: Specify spray head body and nozzles separately.
Note: Radius reduction over 25% of the normal throw of the nozzle is
not recommended.
Note: 16 Series and 22 Series recommended for ground cover or shrub
areas only.
26
Spray Heads
www.rainbird.com
2005 – 2006 Catalog
Spray Heads
5 Series MPR Stream Bubbler Nozzles
0° Trajectory
METRIC
Nozzle
Pressure
psi
Radius
ft.
Flow
GPM
Nozzle
Pressure
bars
Radius
m
Flow
m3⁄h
Flow
l/s
5F-B
15
20
25
30
15
20
25
30
15
20
25
30
15
20
25
30
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
1.50
1.50
1.50
1.50
1.00
1.00
1.00
1.00
0.50
0.50
0.50
0.50
0.50
0.50
0.50
0.50
5F-B
1,0
1,5
2,0
2,1
1,0
1,5
2,0
2,1
1,0
1,5
2,0
2,1
1,0
1,5
2,0
2,1
1,5
1,5
1,5
1,5
1,5
1,5
1,5
1,5
1,5
1,5
1,5
1,5
1,5
1,5
1,5
1,5
0,35
0,35
0,35
0,35
0,23
0,23
0,23
0,23
0,12
0,12
0,12
0,12
0,12
0,12
0,12
0,12
0,09
0,09
0,09
0,09
0,06
0,06
0,06
0,06
0,03
0,03
0,03
0,03
0,03
0,03
0,03
0,03
5H-B
5Q-B
5CST-B
5H-B
5Q-B
5CST-B
Note: Indicates adjusted radius at psi shown.
Note: Flow at adjusted radius of 5 feet (1,5 m).
8 FLT Series MPR
5° Trajectory
■
▲
METRIC
5° Trajectory
■
▲
Nozzle
psi
ft.
GPM
Precip
In/h
Precip
In/h
Nozzle
bars
m
m3⁄h
Flow
l/s
Precip Precip
mm/h mm/h
8F-FLT
15
20
25
30
15
20
25
30
15
20
25
30
3.34
2.89
2.59
2.36
3.36
2.91
2.60
2.38
3.32
2.87
2.57
2.35
3.86
3.34
2.99
2.73
3.88
3.36
3.01
2.75
3.83
3.32
2.97
2.71
8F-FLT
1,0
1,5
2,0
2,1
1,0
1,5
2,0
2,1
1,0
1,5
2,0
2,1
0,07
0,08
0,09
0,10
0,04
0,04
0,05
0,05
0,02
0,02
0,02
0,02
87
71
61
60
87
71
62
60
86
71
61
60
8H-FLT
8Q-FLT
6
7
7
8
6
7
7
8
6
7
7
8
1.11
1.28
1.43
1.57
0.56
0.65
0.72
0.79
0.28
0.32
0.36
0.39
8H-FLT
8Q-FLT
1,7
2,1
2,4
2,4
1,7
2,1
2,4
2,4
1,7
2,1
2,4
2,4
0,25
0,30
0,35
0,36
0,12
0,15
0,18
0,18
0,06
0,07
0,09
0,09
100
82
71
69
101
82
71
70
100
81
71
69
Note: Radius reduction over 25% of the normal throw of the nozzle is not recommended.
2005 – 2006 Catalog
www.rainbird.com
Spray Heads
27
Spray Heads
Variable Arc Nozzles
4 Series VAN
VAN Series Nozzles
0° Trajectory
■
▲
Nozzle
Pressure Radius
psi
ft.
Flow
GPM
Precip
In/h
Precip
In/h
Primary Application
Adjustable nozzles for all standard and irregular-shaped turf and
shrub areas. Fit all Rain Bird spray heads and shrub adaptors.
330° Arc
Features
• Easy arc adjustment from 0° to 360° for 10, 12, 15 and
18-VAN; 0° to 330° for 4, 6 and 8-VAN.
• Simple twist of center collar increases or decreases arc setting.
• Captured screw slot prevents screwdriver strippage.
• No special tools required.
• Tactile left edge indicator
• Ideal for watering odd-shaped areas.
• 12, 15, and 18-VAN have matched precipitation rates with
Rain Bird MPR nozzles.
• Shipped with blue filter screen (.02 x .02) to maintain
precise radius adjustment and prevent clogging.
270° Arc
15
20
25
30
15
20
25
30
15
20
25
30
15
20
25
30
0.62
0.70
0.80
0.88
0.52
0.58
0.66
0.73
0.32
0.37
0.41
0.45
0.21
0.24
0.26
0.29
7.23
8.17
5.25
5.78
7.42
8.27
5.29
5.86
6.84
7.91
4.93
5.41
8.98
10.27
6.26
6.98
8.35
9.43
6.06
6.67
8.57
9.55
6.11
6.77
7.90
9.13
5.69
6.25
10.37
11.86
7.23
8.06
Operating Range
• Radius: *
4-VAN: 3 to 4 feet (0,9 to 1,2 m)
6-VAN: 4 to 6 feet (1,2 to 1,8 m)
8-VAN: 6 to 8 feet (1,8 to 2,4 m)
10-VAN: 8 to 10 feet (2,4 to 3,0 m)
12-VAN: 10 to 12 feet (3,0 to 3,7 m)
15-VAN: 12 to 15 feet (3,7 to 4,6 m)
18-VAN: 14 to 18 feet (4,3 to 5,5 m)
• Optimum pressure: 30 psi (2,1 bars)**
METRIC
180° Arc
90° Arc
▲
bars
m
m3⁄h
Flow
l/s
Precip Precip
mm/h mm/h
330° Arc
1,0
1,5
2,0
2,1
1,0
1,5
2,0
2,1
1,0
1,5
2,0
2,1
1,0
1,5
2,0
2,1
0,04
0,05
0,06
0,06
0,03
0,04
0,04
0,05
0,02
0,03
0,03
0,03
0,01
0,02
0,02
0,02
189
183
152
152
198
187
148
157
173
180
139
139
247
240
167
194
180° Arc
** Rain Bird recommends using 1800 PRS spray heads to maintain optimum
nozzle performance in higher pressure situations.
Models
• 4-VAN
• 6-VAN
• 8-VAN
• 10-VAN
• 12-VAN
• 15-VAN
• 18-VAN
■
Nozzle
270° Arc
* These ranges are based on proper pressure at nozzle.
3
3
4
4
3
3
4
4
3
3
4
4
3
3
4
4
90° Arc
0,9
1,0
1,2
1,2
0,9
1,0
1,2
1,2
0,9
1,0
1,2
1,2
0,9
1,0
1,2
1,2
0,14
0,17
0,20
0,20
0,12
0,14
0,16
0,17
0,07
0,09
0,10
0,10
0,05
0,06
0,06
0,07
218
215
176
176
229
216
171
181
200
208
161
161
285
277
193
224
Note: Turning the radius reduction screw may be required to achieve
catalog radius and flow when the arc is set at less than maximum arc.
▲Triangular spacing based on 50% diameter of throw.
Easy to adjust
VAN Series Nozzle
28
Spray Heads
www.rainbird.com
2005 – 2006 Catalog
Spray Heads
6 Series VAN
0° Trajectory
■
▲
METRIC
■
▲
Nozzle
Pressure Radius
psi
ft.
Flow
GPM
Precip
In/h
Precip
In/h
Nozzle
bars
m
m3⁄h
Flow
l/s
Precip Precip
mm/h mm/h
330° Arc
15
20
25
30
15
20
25
30
15
20
25
30
15
20
25
30
0.85
0.96
1.09
1.20
0.79
0.88
1.00
1.10
0.42
0.49
0.55
0.60
0.26
0.30
0.34
0.37
5.58
4.03
4.58
3.50
6.34
4.52
5.13
3.92
5.05
3.77
4.24
3.21
6.26
4.62
5.24
3.96
6.44
4.65
5.29
4.04
7.32
5.22
5.92
4.53
5.83
4.35
4.90
3.71
7.23
5.33
6.05
4.57
330° Arc
1,0
1,5
2,0
2,1
1,0
1,5
2,0
2,1
1,0
1,5
2,0
2,1
1,0
1,5
2,0
2,1
0,05
0,06
0,08
0,08
0,05
0,06
0,07
0,07
0,03
0,03
0,04
0,04
0,03
0,02
0,02
0,02
144
112
91
91
167
124
99
103
139
98
80
86
167
124
99
99
166
129
105
105
193
143
114
119
161
113
92
99
193
143
114
114
■
▲
METRIC
■
▲
270° Arc
180° Arc
90° Arc
4
5
5
6
4
5
5
6
4
5
5
6
4
5
5
6
270° Arc
180° Arc
90° Arc
1,2
1,5
1,8
1,8
1,2
1,5
1,8
1,8
1,2
1,5
1,8
1,8
1,2
1,5
1,8
1,8
0,19
0,23
0,27
0,27
0,18
0,21
0,24
0,25
0,10
0,11
0,13
0,14
0,06
0,07
0,08
0,08
8 Series VAN
5° Trajectory
Nozzle
Pressure Radius
psi
ft.
Flow
GPM
Precip
In/h
Precip
In/h
Nozzle
bars
m
m3⁄h
Flow
l/s
Precip Precip
mm/h mm/h
330° Arc
15
20
25
30
15
20
25
30
15
20
25
30
15
20
25
30
1.21
1.36
1.55
1.70
1.11
1.24
1.41
1.55
0.84
0.97
1.09
1.19
0.51
0.59
0.66
0.72
3.53
2.91
3.32
2.79
3.95
3.24
3.69
3.10
4.49
3.81
4.28
3.58
5.46
4.64
5.19
4.33
4.07
3.36
3.83
3.22
4.55
3.74
4.25
3.58
5.18
4.40
4.94
4.13
6.29
5.35
5.98
5.00
330° Arc
1,0
1,5
2,0
2,1
1,0
1,5
2,0
2,1
1,0
1,5
2,0
2,1
1,0
1,5
2,0
2,1
0,08
0,09
0,11
0,11
0,07
0,08
0,09
0,10
0,05
0,06
0,07
0,08
0,03
0,04
0,04
0,04
91
79
78
74
103
91
86
81
117
104
98
94
148
127
121
111
270° Arc
180° Arc
90° Arc
6
7
7
8
6
7
7
8
6
7
7
8
6
7
7
8
270° Arc
180° Arc
90° Arc
1,8
2,1
2,3
2,4
1,8
2,1
2,3
2,4
1,8
2,1
2,3
2,4
1,8
2,1
2,3
2,4
0,27
0,32
0,38
0,39
0,25
0,30
0,34
0,35
0,19
0,23
0,26
0,27
0,12
0,14
0,16
0,16
105
91
90
86
119
105
99
94
135
120
113
109
171
147
140
128
2005 – 2006 Catalog
www.rainbird.com
Spray Heads
29
Spray Heads
10 Series VAN
10° Trajectory
■
▲
METRIC
■
▲
Nozzle
Pressure Radius
psi
ft.
Flow
GPM
Precip
In/h
Precip
In/h
Nozzle
bars
m
m3⁄h
Flow
l/s
Precip Precip
mm/h mm/h
360° Arc
15
20
25
30
15
20
25
30
15
20
25
30
15
20
25
30
1.93
2.32
2.52
2.60
1.45
1.75
1.89
2.10
0.97
1.20
1.26
1.45
0.48
0.58
0.63
0.75
3.80
3.50
3.00
2.50
3.80
3.50
3.00
2.70
3.80
3.50
3.00
2.80
3.80
3.50
3.00
2.90
4.39
4.04
3.46
2.89
4.39
4.04
3.46
3.12
4.39
4.04
3.46
3.23
4.39
4.04
3.46
3.35
360° Arc
1,0
1,5
2,0
2,1
1,0
1,5
2,0
2,1
1,0
1,5
2,0
2,1
1,0
1,5
2,0
2,1
0.12
0.15
0.16
0.16
0.09
0.11
0.12
0.13
0.06
0.08
0.08
0.09
0.03
0.04
0.04
0.05
96
89
76
63
96
89
76
68
96
89
76
71
96
89
76
73
111
103
88
73
111
103
88
79
111
103
88
82
111
103
88
85
■
▲
METRIC
■
▲
270° Arc
180° Arc
90° Arc
7
8
9
10
7
8
9
10
7
8
9
10
7
8
9
10
270° Arc
180° Arc
90° Arc
2.1
2.4
2.7
3.1
2.1
2.4
2.7
3.1
2.1
2.4
2.7
3.1
2.1
2.4
2.7
3.1
0.44
0.53
0.57
0.59
0.33
0.40
0.43
0.48
0.22
0.27
0.29
0.33
0.11
0.13
0.14
0.17
12 Series VAN
15° Trajectory
Nozzle
Pressure Radius
psi
ft.
Flow
GPM
Precip
In/h
Precip
In/h
Nozzle
bars
m
m3⁄h
Flow
l/s
Precip Precip
mm/h mm/h
360° Arc
15
20
25
30
15
20
25
30
15
20
25
30
15
20
25
30
1.80
2.10
2.40
2.60
1.35
1.58
1.80
1.95
0.90
1.05
1.20
1.30
0.45
0.53
0.60
0.65
2.14
2.02
1.91
1.74
2.14
2.02
1.91
1.74
2.14
2.02
1.91
1.74
2.14
2.02
1.91
1.74
2.47
2.34
2.21
2.01
2.47
2.34
2.21
2.01
2.47
2.34
2.21
2.01
2.47
2.34
2.21
2.01
360° Arc
1,0
1,5
2,0
2,1
1,0
1,5
2,0
2,1
1,0
1,5
2,0
2,1
1,0
1,5
2,0
2,1
0,11
0,14
0,16
0,16
0,09
0,10
0,12
0,12
0,06
0,07
0,08
0,08
0,03
0,03
0,04
0,04
55
47
46
44
55
47
46
44
55
47
46
44
55
47
46
44
270° Arc
180° Arc
90° Arc
9
10
11
12
9
10
11
12
9
10
11
12
9
10
11
12
270° Arc
180° Arc
90° Arc
2,7
3,2
3,6
3,7
2,7
3,2
3,6
3,7
2,7
3,2
3,6
3,7
2,7
3,2
3,6
3,7
0,40
0,48
0,59
0,60
0,30
0,36
0,45
0,45
0,20
0,24
0,30
0,30
0,10
0,12
0,15
0,15
63
54
53
51
63
54
53
51
63
54
53
51
63
54
53
51
30
Spray Heads
www.rainbird.com
2005 – 2006 Catalog
Spray Heads
15 Series VAN
23° Trajectory
■
▲
METRIC
■
▲
Nozzle
Pressure Radius
psi
ft.
Flow
GPM
Precip
In/h
Precip
In/h
Nozzle
bars
m
m3⁄h
Flow
l/s
Precip Precip
mm/h mm/h
360° Arc
15
20
25
30
15
20
25
30
15
20
25
30
15
20
25
30
2.60
3.00
3.30
3.70
1.95
2.25
2.48
2.78
1.30
1.50
1.65
1.85
0.65
0.75
0.82
0.92
2.07
2.01
1.62
1.58
2.07
2.01
1.62
1.58
2.07
2.01
1.62
1.58
2.07
2.01
1.62
1.58
2.39
2.32
1.87
1.83
2.39
2.32
1.87
1.83
2.39
2.32
1.87
1.83
2.39
2.32
1.87
1.83
360° Arc
1,0
1,5
2,0
2,1
1,0
1,5
2,0
2,1
1,0
1,5
2,0
2,1
1,0
1,5
2,0
2,1
0,16
0,19
0,23
0,23
0,12
0,15
0,17
0,18
0,08
0,10
0,11
0,12
0,04
0,05
0,06
0,06
52
47
41
40
52
47
41
40
52
47
41
40
52
47
41
40
60
55
48
46
60
55
48
46
60
55
48
46
60
55
48
46
■
▲
METRIC
■
▲
270° Arc
180° Arc
90° Arc
11
12
14
15
11
12
14
15
11
12
14
15
11
12
14
15
270° Arc
180° Arc
90° Arc
3,4
3,9
4,5
4,6
3,4
3,9
4,5
4,6
3,4
3,9
4,5
4,6
3,4
3,9
4,5
4,6
0,60
0,72
0,84
0,84
0,45
0,54
0,63
0,63
0,30
0,36
0,42
0,42
0,15
0,18
0,21
0,21
18 Series VAN
26° Trajectory
Nozzle
Pressure Radius
psi
ft.
Flow
GPM
Precip
In/h
Precip
In/h
Nozzle
bars
m
m3⁄h
Flow
l/s
Precip Precip
mm/h mm/h
360° Arc
15
20
25
30
15
20
25
30
15
20
25
30
15
20
25
30
4.21
4.70
4.86
5.32
3.16
3.52
3.65
3.99
2.11
2.35
2.43
2.66
1.05
1.17
1.22
1.33
2.07
2.01
1.62
1.58
2.07
2.01
1.62
1.58
2.07
2.01
1.62
1.58
2.07
2.01
1.62
1.58
2.39
2.32
1.87
1.83
2.39
2.32
1.87
1.83
2.39
2.32
1.87
1.83
2.39
2.32
1.87
1.83
360° Arc
1,0
1,5
2,0
2,1
1,0
1,5
2,0
2,1
1,0
1,5
2,0
2,1
1,0
1,5
2,0
2,1
0,27
0,30
0,33
0,34
0,20
0,22
0,25
0,25
0,13
0,15
0,17
0,17
0,07
0,08
0,08
0,08
52
47
41
40
52
47
41
40
52
47
41
40
52
47
41
40
270° Arc
180° Arc
90° Arc
14
15
17
18
14
15
17
18
14
15
17
18
14
15
17
18
270° Arc
180° Arc
90° Arc
4,3
4,8
5,4
5,5
4,3
4,8
5,4
5,5
4,3
4,8
5,4
5,5
4,3
4,8
5,4
5,5
0,96
1,07
1,20
1,21
0,72
0,80
0,90
0,91
0,48
0,54
0,60
0,61
0,24
0,27
0,30
0,30
60
55
48
46
60
55
48
46
60
55
48
46
60
55
48
46
2005 – 2006 Catalog
www.rainbird.com
Spray Heads
31
Spray Heads
Double-Orifice Plastic Nozzles
Plastic U-Series Nozzles
Use 30% Less Water*
Primary Application
The patented U-Series nozzle is the first plastic nozzle with a second orifice for close-in watering and more uniform water distribution. Use up to 30% less water.* Its unique design cuts watering
run times, saves water and money, and reduces waste.
Features
• Additional orifice for close-in watering. Minimizes dry brown
spots around spray heads.
• Low Scheduling Coefficient for efficient watering.**
• Matched precipitation rate between sets and matched flow
(GPM, m 3/h and l/s) and precipitation rates with 1800 Series MPR
nozzles.
• Greater flexibility. Now, with the new 8’ and 10’ nozzles, a complete family of fixed arc U-Series nozzles.
• Fine mesh screen protects bottom orifice from debris.
• Fits all Rain Bird sprinklers and shrub adapters.
* When U-Series dual-orifice nozzles are installed instead of standard nozzles on
every spray head in the zone. Results may vary based on site-specific conditions
such as sprinkler spacing, wind, temperature, soil and grass type.
** Scheduling Coefficient (SC) measures the efficiency of spray heads. SC measures
how much more you must water your ENTIRE area for the driest sections to receive
sufficient water. The lower the SC, the better the spray heads distribute water.
Operating Range
• Optimum pressure: 30 psi (2,1 bars) *
* Rain Bird recommends using 1800 PRS spray heads to maintain optimum
nozzle performance in higher pressure situations.
Models
• U-8Q: 8-foot quarter-circle pattern nozzle New
• U-8T: 8-foot one-third-circle pattern nozzle New
• U-8H: 8-foot half-circle pattern nozzle New
• U-8F: 8-foot full-circle pattern nozzle New
• U-10Q: 10-foot quarter-circle pattern nozzles New
• U-10T: 10-foot one-third-circle pattern nozzle New
• U-10H: 10-foot half-circle pattern nozzle New
• U-10F: 10-foot full-circle pattern nozzle New
• U-12Q: 12-foot quarter-circle pattern nozzle
• U-12T: 12-foot one-third-circle pattern nozzle
• U-12H: 12-foot half-circle pattern nozzle
32
Spray Heads
• U-12TT: 12-foot two-thirds-circle pattern nozzle
• U-12TQ: 12-foot three-quarter-circle pattern nozzle
• U-12F: 12-foot full-circle pattern nozzle
• U-15Q: 15-foot quarter-circle pattern nozzle
• U-15T: 15-foot one-third-circle pattern nozzle
• U-15H: 15-foot half-circle pattern nozzle
• U-15TT: 15-foot two-thirds-circle pattern nozzle
• U-15TQ: 15-foot three-quarter-circle pattern nozzle
• U-15F: 15-foot full-circle pattern nozzle
U-Series Nozzle
U-Series Nozzle
Better, more uniform water distribution. Water flowing from both
orifices combines to form a
continuous water stream.
Eliminates gaps for more uniform
coverage throughout the entire
watering area.
Features
• Convenient re-sealable bags
• Separate, detachable nozzle and
screen pouches
• Tamper proof seal
• Hanging holes for easy display
www.rainbird.com
2005 – 2006 Catalog
Spray Heads
U8 Series
■
▲
METRIC
Flow
GPM
Precip
In/h
Precip
In/h
Nozzle
bars
m
m3⁄h
Flow
l/s
Precip Precip
mm/h mm/h
0.74
0.86
0.96
1.05
0.37
0.42
0.47
0.52
0.25
0.29
0.32
0.35
0.18
0.21
0.24
0.26
2.07
2.01
1.62
1.58
2.07
2.01
1.62
1.58
2.07
2.01
1.62
1.58
2.07
2.01
1.62
1.58
2.39
2.32
1.87
1.83
2.39
2.32
1.87
1.83
2.39
2.32
1.87
1.83
2.39
2.32
1.87
1.83
U-8F
1,0
1,5
2,0
2,1
1,0
1,5
2,0
2,1
1,0
1,5
2,0
2,1
1,0
1,5
2,0
2,1
0,05
0,05
0,06
0,07
0,02
0,03
0,03
0,03
0,02
0,02
0,02
0,02
0,01
0,01
0,01
0,02
52
47
41
40
52
47
41
40
52
47
41
40
52
47
41
40
60
55
48
46
60
55
48
46
60
55
48
46
60
55
48
46
■
▲
METRIC
■
▲
Flow
GPM
Precip
In/h
Precip
In/h
Nozzle
bars
m
m3⁄h
Flow
l/s
Precip Precip
mm/h mm/h
1.16
1.34
1.50
1.64
0.58
0.67
0.75
0.82
0.39
0.45
0.50
0.55
0.29
0.33
0.37
0.41
2.07
2.01
1.62
1.58
2.07
2.01
1.62
1.58
2.07
2.01
1.62
1.58
2.07
2.01
1.62
1.58
2.39
2.32
1.87
1.83
2.39
2.32
1.87
1.83
2.39
2.32
1.87
1.83
2.39
2.32
1.87
1.83
U-10F
1,0
1,5
2,0
2,1
1,0
1,5
2,0
2,1
1,0
1,5
2,0
2,1
1,0
1,5
2,0
2,1
0,07
0,08
0,09
0,10
0,04
0,04
0,05
0,05
0,02
0,03
0,03
0,03
0,02
0,02
0,02
0,03
52
47
41
40
52
47
41
40
52
47
41
40
52
47
41
40
10° Trajectory
Nozzle
Pressure Radius
psi
ft.
U-8F
15
20
25
30
15
20
25
30
15
20
25
30
15
20
25
30
U-8H
U-8T
U-8Q
5
6
7
8
5
6
7
8
5
6
7
8
5
6
7
8
U-8H
U-8T
U-8Q
■
1,7
2,1
2,4
2,4
1,7
2,1
2,4
2,4
1,7
2,1
2,4
2,4
1,7
2,1
2,4
2,4
0,16
0,20
0,23
0,24
0,08
0,10
0,12
0,12
0,05
0,07
0,08
0,08
0,04
0,05
0,06
0,06
▲
U10 Series
12° Trajectory
Nozzle
U-10F
U-10H
U-10T
U-10Q
Pressure Radius
psi
ft.
15
20
25
30
15
20
25
30
15
20
25
30
15
20
25
30
7
8
9
10
7
8
9
10
7
8
9
10
7
8
9
10
U-10H
U-10T
U-10Q
2,1
2,6
3,0
3,1
2,1
2,6
3,0
3,1
2,1
2,6
3,0
3,1
2,1
2,6
3,0
3,1
0,26
0,30
0,34
0,37
0,13
0,15
0,17
0,19
0,09
0,10
0,11
0,12
0,07
0,08
0,08
0,09
60
55
48
46
60
55
48
46
60
55
48
46
60
55
48
46
Note: Specify spray head body and nozzle sizes separately.
Note: Radius reduction over 25% of the normal throw of the nozzle
is not recommended.
Note: All U-Series nozzles tested on 4" (10,2) pop-ups.
2005 – 2006 Catalog
www.rainbird.com
Spray Heads
33
Spray Heads
U12 Series
23° Trajectory
■
▲
METRIC
■
▲
Nozzle
Pressure Radius
psi
ft.
Flow
GPM
Precip
In/h
Precip
In/h
Nozzle
bars
m
m3⁄h
Flow
l/s
Precip Precip
mm/h mm/h
U-12F
15
20
25
30
15
20
25
30
15
20
25
30
15
20
25
30
15
20
25
30
15
20
25
30
1.80
2.10
2.40
2.60
1.35
1.58
1.80
1.95
1.20
1.40
1.60
1.74
0.90
1.05
1.20
1.30
0.60
0.70
0.80
0.87
0.45
0.53
0.60
0.65
2.14
2.02
1.91
1.74
2.14
2.02
1.91
1.74
2.14
2.02
1.91
1.74
2.14
2.02
1.91
1.74
2.14
2.02
1.91
1.74
2.14
2.02
1.91
1.74
2.47
2.34
2.21
2.01
2.47
2.34
2.21
2.01
2.47
2.34
2.21
2.01
2.47
2.34
2.21
2.01
2.47
2.34
2.21
2.01
2.47
2.34
2.21
2.01
U-12F
1,0
1,5
2,0
2,1
1,0
1,5
2,0
2,1
1,0
1,5
2,0
2,1
1,0
1,5
2,0
2,1
1,0
1,5
2,0
2,1
1,0
1,5
2,0
2,1
0,11
0,14
0,16
0,16
0,09
0,10
0,12
0,12
0,08
0,09
0,11
0,11
0,06
0,07
0,08
0,08
0,04
0,05
0,05
0,05
0,03
0,03
0,04
0,04
55
47
46
44
55
47
46
44
55
47
46
44
55
47
46
44
55
47
46
44
55
47
46
44
U-12TQ
U-12TT
U-12H
U-12T
U-12Q
9
10
11
12
9
10
11
12
9
10
11
12
9
10
11
12
9
10
11
12
9
10
11
12
U-12TQ
U-12TT
U-12H
U-12T
U-12Q
2,7
3,2
3,6
3,7
2,7
3,2
3,6
3,7
2,7
3,2
3,6
3,7
2,7
3,2
3,6
3,7
2,7
3,2
3,6
3,7
2,7
3,2
3,6
3,7
0,40
0,48
0,59
0,60
0,30
0,36
0,45
0,45
0,26
0,32
0,40
0,40
0,20
0,24
0,30
0,30
0,13
0,16
0,20
0,20
0,10
0,12
0,15
0,15
63
54
53
51
63
54
53
51
63
54
53
51
63
54
53
51
63
54
53
51
63
54
53
51
is not recommended.
34
Spray Heads
www.rainbird.com
2005 – 2006 Catalog
Spray Heads
U15 Series
23° Trajectory
■
▲
METRIC
■
▲
Nozzle
Pressure Radius
psi
ft.
Flow
GPM
Precip
In/h
Precip
In/h
Nozzle
bars
m
m3⁄h
Flow
l/s
Precip Precip
mm/h mm/h
U-15F
15
20
25
30
15
20
25
30
15
20
25
30
15
20
25
30
15
20
25
30
15
20
25
30
2.60
3.00
3.30
3.70
1.95
2.25
2.48
2.78
1.74
2.01
2.21
2.48
1.30
1.50
1.65
1.85
0.87
1.00
1.10
1.23
0.65
0.75
0.82
0.92
2.07
2.01
1.62
1.58
2.07
2.01
1.62
1.58
2.07
2.01
1.62
1.58
2.07
2.01
1.62
1.58
2.07
2.01
1.62
1.58
2.07
2.01
1.62
1.58
2.39
2.32
1.87
1.83
2.39
2.32
1.87
1.83
2.39
2.32
1.87
1.83
2.39
2.32
1.87
1.83
2.39
2.32
1.87
1.83
2.39
2.32
1.87
1.83
U-15F
1,0
1,5
2,0
2,1
1,0
1,5
2,0
2,1
1,0
1,5
2,0
2,1
1,0
1,5
2,0
2,1
1,0
1,5
2,0
2,1
1,0
1,5
2,0
2,1
0,16
0,19
0,23
0,23
0,12
0,15
0,17
0,18
0,11
0,13
0,15
0,16
0,08
0,10
0,11
0,12
0,05
0,07
0,08
0,08
0,04
0,05
0,06
0,06
52
47
41
40
52
47
41
40
52
47
41
40
52
47
41
40
52
47
41
40
52
47
41
40
U-15TQ
U-15TT
U-15H
U-15T
U-15Q
11
12
14
15
11
12
14
15
11
12
14
15
11
12
14
15
11
12
14
15
11
12
14
15
U-15TQ
U-15TT
U-15H
U-15T
U-15Q
3,4
3,9
4,5
4,6
3,4
3,9
4,5
4,6
3,4
3,9
4,5
4,6
3,4
3,9
4,5
4,6
3,4
3,9
4,5
4,6
3,4
3,9
4,5
4,6
0,60
0,72
0,84
0,84
0,45
0,54
0,63
0,63
0,40
0,48
0,55
0,56
0,30
0,36
0,42
0,42
0,20
0,24
0,28
0,28
0,15
0,18
0,21
0,21
60
55
48
46
60
55
48
46
60
55
48
46
60
55
48
46
60
55
48
46
60
55
48
46
is not recommended.
2005 – 2006 Catalog
www.rainbird.com
Spray Heads
35
Spray Heads
Adjustable Full-Circle Bubbler
Pressure Compensating Full-Circle Bubblers
1300A-F
1400 Series
Primary Application
Designed for tree, shrub and flower areas.
Primary Application
Designed for irrigating tree, shrub and flower areas where pressure
compensation is required.
Features
• Fully adjustable flow.
• Shipped with SR-050 1⁄2" (15/21) inlet filter screen for easy
installation and resistance to debris.
• Operates over a wide range of pressures.
• Non-corrosive plastic and stainless steel construction for long life.
Operating Range
• Flow: 1.0 to 2.3 GPM (0,23 to 0,52 m3⁄h; 0,06 to 0,14 l/s)
Dimensions
• 1⁄2" (15/21) female threaded inlet
• Height: 1" (2,5 cm)
• Top diameter: 1" (2,5 cm)
Operating Range
Model
• 1300A-F
Dimensions
• 1⁄ 2" (15/21) female threaded inlet
• Height: 1" (2,5 cm)
1300A-F
METRIC
Nozzle
Pressure Flow
psi
GPM
Nozzle
bars
m3⁄h
l/s
F
10
20
30
40
50
60
F
0,7
1,0
1,5
2,0
2,5
3,0
3,5
4,0
4,1
1.0
1.4
1.7
1.9
2.1
2.3
Features
• Low flow rates allow water to be absorbed as needed. Reduces runoff.
• Flow will not fluctuate at pressures between 20 and 90 psi (1,4 to
6,2 bars). Maintains even flow.
• Flow is not adjustable for increased vandal resistance.
• No adjustment required.
•Corrosion-proof plastic and rubber construction for long life.
•Shipped with special SR-050 1⁄ 2" (15/21) bubbler filter screen for
easy installation and resistance to debris.
• Trickle pattern on models 1401 and 1402; umbrella pattern on
models 1404 and 1408.
0,23
0,26
0,30
0,34
0,39
0,43
0,48
0,52
0,53
0,06
0,07
0,08
0,09
0,10
0,12
0,13
0,14
0,14
Models
• 1401: 0.25 GPM (0,06 m3⁄h; 0,02 l/s); full-circle, trickle pattern
• 1402: 0.50 GPM (0,11 m3⁄h; 0,03 l/s); full-circle, trickle pattern
• 1404: 1.00 GPM (0,23 m3⁄h; 0,06 l/s); full-circle, umbrella pattern
• 1408: 2.00 GPM (0,46 m3⁄h; 0,12 l/s); full-circle, umbrella pattern
1300A-F
36
1400 Series
Spray Heads
www.rainbird.com
2005 – 2006 Catalog
Spray Heads
Pressure Compensating Screens
1800 PCS
Primary Application
Under the nozzle pressure compensation screens help reduce
pressure flunctuations. Use to control fogging of spray nozzles by
reducing the incoming pressure or to reduce the radius of the water
pattern. Take control of your system with 1800 PCS screens.
Features
• Compensates for pressure variations.
• Eliminates fogging and water waste caused by high pressures.
• Nozzles can be matched with screens to create short-throw,
reduced-radius patterns and/or flush-mounted bubblers.
• New .08 GPM (0,02 m3/h; 0,01 l/s) and .25 GPM (0,06 m3/h; 0,02 l/s)
screens allow greater flexibility in achieving 4', 6', and 7' radius
patterns
• Color-coded for easy identification
• Use with all 1800 Series plastic nozzles (MPR, VAN, U-Series,
Strips and Bubblers).
• Easily installed in new and retrofit applications. Simply replace
standard screen with PCS screen.
Recommended nozzle+PCS combinations
to achieve 4', 6' and 7' radii*
Nozzle
PCS
ft
m
5Q
8Q-FLT
8Q-FLT
8H-FLT
8H-FLT
8F-FLT
8F-FLT
Beige
Pink
Black
Pink
Silver
Black
White
4'
6'
7'
4'
7'
4'
7'
(1,2)
(1,8)
(2,1)
(1,2)
(2,1)
(1,2)
(2,1)
Note: radius reduction data tested at 30 psi (1,5 bars)
* Individual results may vary based on site conditions
* With a pressure compensator, outlet pressure will be reduced, but will fluctuate
as the inlet pressure changes. A pressure compensator cannot maintain outlet
pressure at a constant rate. A pressure regulator establishes and maintains a constant
outlet pressure of 30 psi (2,1 bars) as long as the inlet pressure at the spray head is
greater than 30 psi (2,1 bars).
Operating Range
• Flow: 0.10 to 3.70 GPM (0,05 to 0,84 m 3/h; 0,01 to 0,23 l/s)
Models
• PCS-008: 0.08 GPM (0,02 m 3/h; 0,01 l/s) - Beige New
• PCS-010: 0.1 GPM (0,02 m 3/h; 0,01 l/s) - Purple
• PCS-020: 0.2 GPM (0,05 m 3/h; 0,01 l/s) - Brown
• PCS-025: 0.25 GPM (0,06 m 3/h; 0,02 l/s) - Pink New
• PCS-030: 0.3 GPM (0,07 m3 /h; 0,02 l/s) - Silver
• PCS-040: 0.4 GPM (0,09 m 3/h; 0,03 l/s) - Orange
• PCS-060: 0.6 GPM (0,14 m 3/h; 0,04 l/s) - Black
• PCS-090: 0.9 GPM (0,20 m 3/h; 0,06 l/s) - White
• PCS-125: 1.25 GPM (0,28 m 3/h; 0,08 l/s) - Green
• PCS-175: 1.75 GPM (0,40 m 3/h; 0,11 l/s) - Yellow
• PCS-260: 2.6 GPM (0,59 m 3/h; 0,16 l/s) - Blue
• PCS-370: 3.7 GPM (0,84 m 3/h; 0,23 l/s) - Red
2005 – 2006 Catalog
1800 PCS Screens
www.rainbird.com
Spray Heads
37
Spray Heads
VAN
U-Series
1800 PCS Performance
PCS-010 PCS-020
PCS-030
GPM
0.1
0.2
0.3
m3/h (l/s) 0,02 (0,01) 0,05 (0,01) 0,07 (0,02)
Color
Purple
Brown
Silver
Distance feet meters feet meters feet meters
PCS-040
0.4
0,09 (0,03)
Orange
feet meters
U-12Q
U-12T
U-12H
U-12TT
U-12TQ
U-12F
U-15Q
U15T
U-15H
U15TT
U15TQ
U-15F
4 (90°)
4 (180°)
4 (270°)
4 (330°)
6 (90°)
6 (180°)
6 (270°)
6 (330°)
8 (90°)
8 (180°)
8 (270°)
8 (330°)
10 (90°)
10 (180°)
10 (270°)
10 (360°)
12 (90°)
12 (180°)
12 (270°)
12 (360°)
15 (90°)
15 (180°)
15 (270°)
15 (360°)
18 (90°)
18 (180°)
18 (270°)
12'
8'
4'
2'
2'
(0,6)
(0,6)
1'
1'
(0,3)
(0,3)
1'
(0,3)
7'
6'
3'
(0,9)
(3,7)
(2,4)
(1,2)
6'
(1,8)
3'
11'
(0,9)
(3,4)
2'
(0,6)
3'
(0,9)
3'
2'
1'
1'
3'
2'
0.5'
0.5'
1'
0.5'
3'
3'
(2,1)
(1,8)
(0,9)
(0,9)
(0,6)
(0,3)
(0,3)
(0,9)
(0,6)
(0,2)
(0,2)
(0,3)
(0,2)
(0,9)
0.5'
8'
1'
0.5'
(0,2)
(2,4)
(0,3)
(0,2)
2'
1'
(0,6)
(0,3)
0.5'
(0,2)
4'
3'
2'
2'
6'
4'
1'
1'
3'
2'
0.5'
0.5'
5'
1'
1'
1'
10'
2'
1'
1'
5'
3'
(1,2)
(0,9)
(0,6)
(0,6)
(1,8)
(1,2)
(0,3)
(0,3)
(0,9)
(0,6)
(0,2)
(0,2)
(1,5)
(0,3)
(0,3)
(0,3)
(3,1)
(0,6)
(0,3)
(0,3)
(1,5)
(0,9)
2'
1'
0.5'
(0,6)
(0,3)
(0,2)
PCS-060
0.6
0,14 (0,04)
Black
feet meters
12'
7'
6'
5'
6'
15'
10'
5'
(3,7)
(2,1)
(1,8)
(1,5)
(1,8)
(4,6)
(3,0)
(1,5)
4'
(1,2)
4'
4'
4'
(1,2)
(1,2)
(1,2)
6'
3'
3'
8'
4'
3'
3'
10'
5'
4'
4'
12'
5'
3'
3'
11'
6'
(1,8)
(0,9)
(0,9)
(2,4)
(1,2)
(0,9)
(0,9)
(3,1)
(1,5)
(1,2)
(1,2)
(3,7)
(1,5)
(0,9)
(0,9)
(3,4)
(1,8)
6'
3'
1'
(1,8)
(0,9)
(0,3)
PCS-090
0.9
0,20 (0,06)
White
feet meters
PCS-125
1.25
0,28 (0,08)
Green
feet meters
11'
9'
8'
8'
(3,4)
(2,7)
(2,4)
(2,4)
12'
11'
12'
9'
(3,7)
(3,4)
(3,7)
(2,7)
13'
9'
(4,0)
(2,7)
14'
12'
11'
9'
7'
(4,3)
(3,7)
(3,4)
(2,7)
(2,1)
PCS-175
1.75
0,40 (0,11)
Yellow
feet meters
PCS-260
2.6
0,59 (0,16)
Blue
feet meters
PCS-370
3.7
0,84 (0,23)
Red
feet meters
12'
(3,7)
11'
(3,4)
12'
(3,7)
15'
15'
12'
11'
10'
(4,6)
(4,6)
(3,7)
(3,4)
(3,1)
13'
13'
13'
(4,0)
(4,0)
(4,0)
14'
14'
15'
(4,3)
(4,3)
(4,6)
14'
(4,3)
15'
(4,6)
18'
15'
(5,5)
(4,6)
18'
(5,5)
6'
(1,8)
6'
6'
(1,8)
(1,8)
8'
5'
5'
(2,4)
(1,5)
(1,5)
8'
8'
(2,4)
(2,4)
7'
6'
6'
(2,1)
(1,8)
(1,8)
10'
9'
8'
(3,1)
(2,7)
(2,4)
10'
10'
(3,1)
(3,1)
8'
6'
5'
15'
9'
6'
(2,4)
(1,8)
(1,5)
(4,6)
(2,7)
(1,8)
12'
8'
7'
(3,7)
(2,4)
(2,1)
12'
12'
(3,7)
(3,7)
12'
5'
3'
(3,7)
(1,5)
(0,9)
12'
8'
8'
17'
9'
5'
(3,7)
(2,4)
(2,4)
(5,2)
(2,7)
(1,5)
15'
15'
12'
18'
16'
11'
(4,6)
(4,6)
(3,7)
(5,5)
(4,9)
(3,4)
38
Spray Heads
www.rainbird.com
2005 – 2006 Catalog
Spray Heads
Strip
Bubbler
MPR
1800 PCS Performance
GPM
m3/h (l/s)
Color
Distance
5Q
5T
5H
5F
8Q
8T
8H
8F
10Q
10T
10H
10F
12Q
12T
12H
12TT
12TQ
12F
15Q
15T
15H
15TT
15TQ
15F
16Q-SLA
16H-SLA
16F-SLA
22Q-SS
22H-SS
22F-SS
5Q-B
5H-B
5F-B
5CST-B
15SQ
9SST
15CST
15SST
15EST
PCS-010 PCS-020
PCS-030
0.1
0.2
0.3
0,02 (0,01) 0,05 (0,01) 0,07 (0,02)
Purple
Brown
Silver
feet meters feet meters feet meters
5' (1,5)
5' (1,5)
4' (1,2)
5' (1,5)
5'
(1,5)
4' (1,2)
8' (2,4)
6' (1,8)
7'
(2,1)
5' (1,5)
7'
(2,1)
2'
(0,6)
2' (0,6)
6' (1,8)
8'
(2,4)
4' (1,2)
9'
(2,7)
3' (0,9)
6'
(1,8)
3'
2'
3'
1'
(0,3)
(0,9)
(0,6)
(0,9)
8'
6'
4'
2'
2'
(2,4)
(1,8)
(1,2)
(0,6)
(0,6)
5'
5'
3'
1'
(1,5)
(1,5)
(0,9)
(0,3)
2'
0.5'
(0,6)
(0,2)
8'
1'
(2,4)
(0,3)
2'
(0,6)
7'
2'
(2,1)
(0,6)
4'
1'
(1,2)
(0,3)
3'
(0,9)
2'
1'
(0,6)
(0,3)
PCS-040
0.4
0,09 (0,03)
Orange
feet meters
8'
8'
3'
10'
10'
8'
1'
11'
10'
6'
4'
3'
2'
9'
7'
4'
2'
(2,4)
(2,4)
(0,9)
(3,1)
(3,1)
(2,4)
(0,3)
(3,4)
(3,1)
(1,8)
(1,2)
(0,9)
(0,6)
(2,7)
(2,1)
(1,2)
(0,6)
11'
4'
0.5'
12'
4'
(3,4)
(1,2)
(0,2)
(3,7)
(1,2)
5'
2'
1'
5'
(1,5)
(0,6)
(0,3)
(1,5)
PCS-060
0.6
0,14 (0,04)
Black
feet meters
8'
(2,4)
10'
4'
12'
11'
10'
6'
6'
5'
12'
12'
7'
4'
(3,1)
(1,2)
(3,7)
(3,4)
(3,1)
(1,8)
(1,8)
(1,5)
(3,7)
(3,7)
(2,1)
(1,2)
16'
9'
2'
20'
8'
2'
5'
2'
PCS-090
0.9
0,20 (0,06)
White
feet meters
8'
(2,4)
12'
12'
9'
8'
7'
15'
14'
11'
8'
6'
4'
(3,7)
(3,7)
(2,7)
(2,4)
(2,1)
(4,6)
(4,3)
(3,4)
(2,4)
(1,8)
(1,2)
(4,9)
(2,7)
(0,6)
(6,1)
(2,4)
(0,6)
12'
3'
22'
14'
5'
(1,5)
(0,6)
3'
4' x 4'
7' x 12'
4' x 12' (1,2 x 3,7) 4' x 24' (1,2 x 7,3) 4' x 30'
2' x 10' (0,6x 3,1) 3' x 20' (0,9 x 6,1) 4' x 26'
3' x 12' (0,9 x 3,7) 4' x 15' (1,2 x 4,6)
PCS-125
1.25
0,28 (0,08)
Green
feet meters
PCS-175
1.75
0,40 (0,11)
Yellow
feet meters
PCS-260
2.6
0,59 (0,16)
Blue
feet meters
PCS-370
3.7
0,84 (0,23)
Red
feet meters
15'
10'
(3,1)
12'
10'
8'
(3,7)
(3,1)
(2,4)
12'
12'
(3,7)
(3,7)
15'
15'
10'
8'
6'
(4,6)
(4,6)
(3,1)
(2,4)
(1,8)
13'
14'
10'
(4,0)
(4,3)
(3,1)
15'
15'
12'
(4,6)
(4,6)
(3,7)
(3,7)
(0,9)
(6,7)
(4,3)
(1,5)
16'
6'
(4,9)
(1,8)
12'
(3,7)
16'
(4,9)
22'
7'
(6,7)
(2,1)
18'
(5,5)
22'
(6,7)
(0,9)
5'
(1,5)
(1,2 x 1,2)
(2,1 x 3,7)
(1,2 x 9,1)
(1,2 x 7,9)
7' x 7 '
9' x 18'
4' x 30'
4' x 30'
(4,6)
(2,1 x 2,1) 11' x 11' (3,4 x 3,4) 15' x 15' (4,6 x 4,6) 16' x 16' (4,9 x 4,9)
(2,7 x 5,5) 9' x 18' (2,7 x 5,5)
(1,2 x 9,1)
(1,2 x 9,1)
Bold type indicates recommended nozzle/screen combination to achieve catalog performance at 30 psi (2,1 bars).
Note: Screens were tested at 50 psi (3,5 bars) for 10 minutes prior to taking distance measurements. Distances may vary slightly with higher pressures and longer run times.
Note: Refer to catalog notation for proper nozzle selection.
2005 – 2006 Catalog
www.rainbird.com
Spray Heads
39
Spray Heads
Swing Assemblies
Swing Pipe
Street Elbow
SA Series
SP and SPX Series
MSE Series
Primary Application
Connects sprinkler heads to lateral pipes. This low-cost, reliable,
and flexible connection prevents sprinkler heads or pipes from
breaking when run over by equipment and allows easy adjustment
of the heads to grade.
Primary Application
Use with Spiral Barb Fittings to
make a flexible swing joint
assembly for sprays and rotors.
Primary Application
Use with Swing Pipe and Spiral
Barb Fittings to make a flexible
swing joint assembly for spray
heads and rotors.
Features
• Adjust head to grade easily
• Leak-proof joints
• Flexible swing arm will not break or crack under a load
• Pre-assembled - saves labor
Operating Range
• Operating pressure up to 80 psi (5,5 bars)
• Surge pressure up to 240 psi (16,6 bars)
• Temperature up to 110˚ F (43˚ C)
Model
• SA6050: 6" (15,2 cm) Long, 1⁄2" x 1⁄2" (15/21) M x M NPT
• SA6050PP: 6" (15,2 cm) Long, 1⁄2" x 1⁄2" (15/21) M x M NPT pallet pack
• SA65075: 6" (15,2 cm) Long, 1⁄2" x 3⁄4" (15/21 x 20/27) M x M NPT
• SA65050Q: 6" (15,2 cm) Long, 1⁄2" x 1⁄2" (15/21) M x M NPT quad
• SA125075: 12" (30,5 cm) Long, 1⁄2" x 3⁄4" (15/21 x 20/27) M x M
NPT
• SA125050Q: 12" (30,5 cm) Long, 1⁄2" x 1⁄2" (15/21) M x M NPT quad
Features
Features
• Available in 100-foot (30 m)
coils and 20-foot (6 m) lengths • Black, high density polyethylene
• Linear low-density polyethylene • Schedule 40 construction
material
Operating Range
• Available in kink-resistant extra
• Operating range up to 80 psi
flex version (SPXFLEX-100) with
(5,5 bars) and 110˚ F (43˚ C)
easy-to-grip surface
Model
Specifications
• MSE050: 1⁄2" (15/21) F x M NPT
• Inside diameter: 0.49" (12 mm)
street elbow
• MSE075: 3⁄4" (20/27) F x M NPT
(5,5 bars) and 110° F (43° C)
street elbow
Models
• SPX-20STICK: 20-foot (6 m)
length
• SPX-100: 100-foot (30 m) coil
• SPXFLEX-100: 100-foot
(30 m) coil
SA Series
SP and SPX Series
40
Spray Heads
www.rainbird.com
MSE075
2005 – 2006 Catalog
Spray Heads
Spiral Barb Fittings
Plastic Shrub Adapter
Non-Potable Plastic
Shrub Adapter
SB Series
PA-8S
PA-8S-NP
Primary Application
Use with Swing Pipe to make a flexible swing joint assembly for
sprays and rotors.
Primary Application
Plastic model which attaches
nozzle to riser to irrigate ground
cover and shrub areas.
Primary Application
Identifies nozzle as part of a
non-potable water system.
Features
• Spiral barb design permits twist-in insertion; eliminates the need
for glue or clamps
• Hard acetal thermoplastic materials for sharper barbs
• Colors: 1⁄ 2" (15/21) Black; 3⁄ 4" (20/27) Gray
Operating Range
• Operating range up to 80 psi (5,5 bars) and 110° F (43° C)
Models
• SBE-050: 1⁄ 2" (15/21) male NPT x 1⁄ 2" spiral barbed elbow
• SBE-050B: 1⁄ 2" (15/21) male NPT x 1⁄ 2" spiral barbed elbow bulk pkg
• SBE-075: 3⁄ 4" (20/27) male NPT x 1⁄ 2" spiral barbed elbow
• SBE-075B: 3⁄ 4" (20/27) male NPT x 1⁄ 2" spiral barbed elbow - bulk
pkg
• SBA-050: 1⁄ 2" (15/21) male NPT x 1⁄ 2" spiral barbed adapter
• SBA-075: 3⁄ 4" (20/27) male NPT x 1⁄ 2" spiral barbed adapter, gray
color
• SB-CPLG: 1⁄ 2" spiral barbed coupling
• SB-TEE: 1⁄ 2" spiral barbed tee
• SBFE-050: 1⁄ 2" (15/21) female NPT x 1⁄ 2" spiral barbed elbow
• SB-NPT-TEE: 1⁄ 2" (15/21) male NPT x 1⁄ 2" spiral barb x 1⁄ 2" spiral
barb tee
SB-CPLG
SBA-050
SBE-050
SBFE-050
SB-TEE
Features
• Purple plastic shrub adapter
Features
• Adapts Rain Bird nozzles for use for easy identification of a
non-potable water system
with 1⁄ 2" (15/21) MPT threaded
•
Adapts Rain Bird nozzles for
risers.
• Accepts protective, non-clogging use with 1⁄ 2" (15/21) MPT
threaded risers
1800 Series filter screen
(shipped with nozzle) and PCS • Accepts protective, non-clogging 1800 Series filter screen
Series screens.
(shipped with nozzle) and
• Durable, non-corrosive plastic
PCS Series screens
construction.
• Durable, non-corrosive plastic
Specifications
construction
• 1⁄ 2" (15/21) female inlet threads
Specifications
• Fine top threads accept all
• 1⁄ 2" (15/21) female inlet thread
Rain Bird nozzles
• Fine top threads accept all
Model
Rain Bird nozzles
• PA-8S
Model
• PA-8S-NP
SBE-075
SBA-075
PA-8S
PA-8S-NP
SB Series
2005 – 2006 Catalog
www.rainbird.com
Spray Heads
41
Spray Heads
Plastic Adapter
Plastic Extension
Pressure Regulating Shrub Adapter
PA-80
1800 -EXT
PA-8S-PRS
Primary Application
Converts pop-up stem to
1⁄ 2" (15/21) male pipe thread.
Primary Application
Extends all Rain Bird spray
head models an additional 6 1⁄2"
(16,5 cm) in height.
Primary Application
Attaches nozzle to riser to irrigate ground cover and shrub areas
requiring pressure regulation.
®
Features
• Adapts Rain Bird sprinklers for
use with any 1⁄ 2" (15/21)
FPT bubbler or spray nozzle.
• Rugged, UV-resistant
thermoplastic construction.
• Easy to install; no tools
required.
Dimensions
• Height: 11⁄ 2" (3,8 cm); 0.8"
(2,0 cm) above 1800 cap
Model
• PA-80
Features
• UV-resistant thermoplastic
construction for long life.
• Fits all Rain Bird spray heads
and nozzles. Exception: Cannot
be used with bubblers.
• Easily installed without any
tools.
• Can be reinstalled without
damaging the threads if
accidentally knocked off the
riser or spray head.
• Maximum recommended
number: two extensions per
sprinkler.
Model
• 1800-EXT
Features
• Rugged thermoplastic construction resists UV rays.
• Adapts nozzles for use with 1⁄ 2" (15/21) MPT threaded risers.
• Patented PRS pressure regulator built into the stem.
No parts to be installed at the site. Saves time and money.
• Maintains constant outlet pressure at 30 psi (2,1 bars).
Ensures maximum spray head and nozzle performance.
• Ends misting and fogging caused by high pressure. Prevents
water waste and minimizes liability.
• Restricts water loss by up to 70% if nozzle is removed or
damaged. Saves water and money. Reduces liability.
Recommended for vandal-prone areas.
• Fits all Rain Bird plastic nozzles.
Operating Range
Specifications
• 1⁄ 2" (15/21) female inlet threads
•Fine top threads accept all Rain Bird nozzles
Dimensions
• Height: 5 1⁄ 4" (13,3 cm)
Model
• PA-8S-PRS
PA-80
42
1800-EXT
Spray Heads
PA-8S-PRS
www.rainbird.com
2005 – 2006 Catalog
Spray Heads
Vandal-Proof Cap
Non-Potable
1800 Series Cover
®
Non-Potable UNI-Spray™
Cover
NEW
1800 VPC
1800 NP Cover
US NP Cover
Primary Application
Designed for vandal-prone
areas.
Primary Application
Identifies spray head as part of non-potable water system.
Primary Application
Identifies spray head as part of
non-potable water system
®
®
Features
• Improved design for better retention on 1800 Series spray head
Features
• Locking stainless steel set screw covers.
• Purple plastic cover for easy identification of non-potable water
(1⁄ 16" Hex; 2 mm Hex) at cap
system.
threads prevents tampering.
• Fits any 1800 Series sprinkler. • Marked with “Do Not Drink!” warning in both English and
Spanish.
• “VPC” stamped on cap for easy
• Snaps onto all 1800 Series spray head covers.
identification.
®
®
®
Model
• 1800 NP Cover
Model
• 1800 VPC
Features
• Purple cover for easy identification of non-potable water
system.
• Threads onto all Uni-Spray spray
head bodies
• UV resistant
Model
• US-NP
Locking Screw
on 1800 VPC
1800 VPC
2005 – 2006 Catalog
1800 NP Cover
www.rainbird.com
US NP Cover
Spray Heads
43
Spray Heads
Root Watering System
RWS Series
Primary Application
Promotes healthy tree growth and the intelligent use of water.
Allows water, air and nutrients to bypass compacted soil and
reach deep root systems directly. Helps young or transplanted
trees survive.
Features
• Encourages roots to grow deep and remain below surface.
• Two bubbler choices make delivering the right amount of water
easy.
• Vandal resistant design with grate locking feature protects irrigation hardware.
• Shipped pre-assembled and ready-to-install.
• Optional sand sock made from landscape fabric prevents fine soil
from infiltrating into the RWS canister.
• Available in 36" length (can also be cut to adjust length).
Models
• RWS – G: RWS with locking grate
• RWS – BG: RWS with 1401 bubbler, locking grate, and
swing assembly
• RWS – BG02: RWS with 1402 bubbler, locking grate, and
swing assembly
• RWS – BCG: RWS with 1401 bubbler, check valve, locking grate,
and swing assembly
• RWS – BCG02: RWS with 1402 bubbler, check valve, locking grate,
and swing assembly
• RWS – BGX: RWS with 1401 bubbler, locking grate, and
18" swing assembly
• RWS – SOCK: Sand sock for all models, can be cut to length
• RWS – GRATE: 4" black grate for RWS
Specifications
• Overall dimensions: Diameter 4" (10,2 cm); Length: 36" (91,4 cm)
• Available bubblers are the Rain Bird 1401 (0.25 GPM, 0,02 l/s) or
1402 (0.50 GPM, 0,03 l/s) pressure compensating bubblers with
full circle trickle pattern and pre-installed 760-micron filter.
• All models come with 12” (30,5 cm) swing assembly with 1⁄ 2"
(15/21) male NPT inlet (RWS-BGX includes 18” [45,7 cm] stick of
open swing pipe).
• Optional check valve is the Rain Bird ACV-050 series, field
adjustable from 5' to 32' (1,5 m to 9,8 m) and factory adjusted to
12' (3,7 m) of pressure.
RWS-BG
44
RSW-SOCK
Spray Heads
www.rainbird.com
2005 – 2006 Catalog
Spray Heads
Saddle Tees
Anti-Theft Fittings
ST Series
PVRA Series
Primary Application
Saddle tees for polyethylene pipe provide a labor-saving method
for connecting sprinklers to laterals once the pipe has been pulled
or laid in the ground.
Primary Application
Anti-theft fittings protect your
investment in quality irrigation
equipment by preventing
the removal of sprinklers
from above.
Features
•Patented seal design
• All plastic components will not corrode like metal saddles
or clamps
• Requires less digging – and less time – than a double-clamped
insert tee
• Convenient installation tools
Features
• 360° swivel action
• Leak-free O-ring seal
• Fits Rain Bird spray heads
and 3⁄ 4" (20/27) inlet rotors
Specifications
•PVC body and high strength nylon bolts and nuts.
Operating Range
• Operating pressure up to
80 psi (5,5 bars)
Models
• ST-75C: 3⁄ 4" x 1⁄ 2" (1,9 cm x 15/21) female NPT saddle tee
•ST-75D: 3⁄ 4" x 3⁄ 4" (1,9 cm x 20/27) female NPT saddle tee
• ST-100C: 1" x 1⁄ 2" (2,5 cm x 15/21) female NPT saddle tee
•ST-100D: 1" x 3⁄ 4" (2,5 cm x 20/27) female NPT saddle tee
• ND-375: Nut Driving Tool
• HC-45: 1⁄ 2" (1,3 cm) Hole Coring Tool
• HC-55: 3⁄ 4" (1,9 cm) Hole Coring Tool
Models
• PVRA-050:
3⁄ 4" x 1⁄ 2" (20/27 x 15/21)
F x M NPT
• PVRA-075:
3⁄ 4" x 3⁄ 4" (20/27) F x M NPT
ST Series
2005 – 2006 Catalog
PVRA Series
www.rainbird.com
Spray Heads
45
Spray Heads
Adjustable Check Valve
Riser, Poly Cut-Off
Riser, Fixed Black
ACV Series
PCR6050
RISER Series
Primary Application
Adjustable check valve holds back 5 to 32 feet (1,5 to 9,8 m) of
pressure head – ideal for preventing the drainage of water through
a sprinkler head, keeping lines charged with water, and preventing
contamination of the irrigation system.
Primary Application
Provides a low cost alternative
for installing sprinkler heads.
Primary Application
Fits all Rain Bird nozzles used to
irrigate ground cover and shrub
areas. Available in 18" (45,7 cm)
and 24" (61,0 cm) lengths.
Features
• Prevents unwanted drainage through a sprinkler head
• Reduces water hammer and hydraulic stresses by keeping laterals
charged with water between irrigation cycles
• Adjusts to hold back from 5 to 32 feet (1,5 to 9,8 m) of pressure
head, 3 psi (0,2 bar) for each 360° turn of the adjustment screw
Operating Range
Models
• ACV-050: 1⁄2" (15/21) F x M NPT
• ACV-075: 3⁄4" (20/27) F x M NPT
• ACV-100: 1" (26/34) F x M NPT
Features
• 6" x 1⁄2" (15,2 cm x 15/21) NPT
Polyethylene cutoff riser
Features
• One piece sleek, black design – no
Operating Range
extra fittings or adapters required
• Operating pressure up to 80 psi 1
• ⁄2" (15/21) male NPT threads at
(5,5 bars)
inlet
• Storage Temperature: -40°F to
• Made from UV resistant thermo150°F (-40°C to 65°C)
plastic materials for long life
Model
Operating Range
• PCR6050
• Temperature: -40°F to 150°F (40°C to 65°C)
• Operating pressure up to 80 psi
(5,5 bars)
Model
• RISER-18: 18" (45,7 cm) fixed
black riser
• RISER-24: 24" (61,0 cm) fixed
black riser
ACV Series
46
Spray Heads
PCR6050
www.rainbird.com
RISER-18
2005 – 2006 Catalog
Spray Heads
Riser, Tree Well
Nozzle Box
NozBox Anchor Kits
TWR Series
NOZBOX
NOZBOX Series
Primary Application
Designed to save installation time for irrigating tree wells by
allowing installers to easily move and reposition the flexible riser
when root balls are dropped in place. Virtually indestructible by
vehicles, foot traffic, or vandals.
Primary Application
Organizes nozzles, emitters
and small tools – minimizing
lost parts and increasing
efficiency.
Features
• Flexible hose allows positioning of the riser exactly where needed
• 48" (121,9 cm) length, 1⁄2" (15/21) MxM NPT riser
• Available with pre-installed 1401 bubbler and/or check valve
Features
• Made of durable lightweight
plastic
• 2 separate compartments:
• Large toolbox area
• Lower compartment contains
3 trays with slotted,
adjustable sections
• Dimensions: 21" L x 11.7" W x
14" H (53,3 cm x 29,7 cm x
35,6 cm)
Primary Application
Contains wall anchors, screws
and bit, all inside a quality partitioned plastic box to meet your
installation needs. The plastic
box is sized to complement the
Rain Bird NozBox organizer.
Operating Range
• Temperature: -40°F to 150°F (-40°C to 65°C)
• Flow: 0-8 GPM (0,0 to 1,82 m 3/h; 0,0 to 0,50 l/s)
Model
• TWR48: 48" (121,9 cm) long, 1⁄2" (15/21) M x M NPT tree well
riser
• TWR4801: 48" (121,9 cm) long, 1⁄2" (15/21) M x M NPT tree well
riser with 1401 bubbler
• TWR48CV: 48" (121,9 cm) long, 1⁄2" (15/21) M x M NPT tree well
riser with check valve
• TWR48CV01: 48" (121,9 cm) long, 1⁄2" (15/21) M x M NPT tree
well riser with 1401 bubbler and check valve
Model
• NozBox
Model
• NozBox-ZAK: Anchor Kit, zinc
wall anchors
• NozBox-AK: Anchor Kit, plastic
wall anchors
NozBox
TWR48CV01
2005 – 2006 Catalog
Features
• Clear re-usable tray
• Two securing latches
• 3 distinct compartments
• Fits inside the Rain Bird NozBox
• NozBox-ZAK includes 40 selfdrilling zinc anchors #8, 40
Phillips/slotted head screws #8 x
11⁄4", and a #2 Phillips insert bit
• NozBox-AK includes 80 plastic
wall anchors #10–12, 80
Phillips/slotted head screws #10
x 1", and a 1⁄4" carbide masonry
drill bit
www.rainbird.com
NozBox-AK
Spray Heads
47
Spray Heads
Spray Head Pull Up Tool
PT
Primary Application
Use when repairing and
installing plastic pop-up
sprinklers
Features
• Pulls up pop-up sprinklers with
or without a nozzle
• Pulls up sprinklers in a canister
• Holds up pop-up sprinklers for
maintenance
• Corrosion resistant
Model
• PT
PT
48
Spray Heads
www.rainbird.com
2005 – 2006 Catalog
Spray Heads
Rotary
Nozzles
Rotors
Rotary Nozzles
Impacts
Valves
Controllers
Central
Controls
Pump Stations
Xerigation®
Accessories
Install Confidence.
Install Rain Bird Rotary Nozzles.
™
®
Resources
& Training
Reference
Rotary Nozzles
0.60 in/hr precipitation rate from 13 to 24 feet
NEW
Rotary Nozzles
Primary Application
Designed to fit on Rain Bird ® spray heads, Rotary Nozzles provide
unsurpassed design flexibility and highly efficient water distribution
from 13' to 24'.
Features
• Low precipitation rate–0.60 in/hr (15,2 mm/hr)–reduces run-off and
erosion.
• Multiple, rotating streams uniformly distribute water throughout the
radius range.
• Matched precipitation rate across radii and pattern simplify the
design process.
• Matched precipitation rate with Rain Bird 5000/5000 Plus MPR
Rotor Nozzles allow MPR irrigation designs from 13' to 35'.
• With approximately 60% less flow than conventional spray nozzles,
Rotary Nozzles allow more heads per zone, reducing overall system
complexity and cost.
• Maintains highly efficient performance throughout the 20-55 psi
pressure range, with no misting or fogging at high pressures.
• Stainless steel radius reduction screw allows reduction down to 13'
on the R13-18 and to 17' on the R17-24 to accommodate varying
landscape needs.
• Designed for use on Rain Bird spray heads.
• Three-year trade warranty.
Operating Range
• Pressure range: 20-55 psi (1,4 to 3,8 bars)
• Spacing: 13' to 24' (4,0 m to 7,3 m)
Models
• R13-18Q: 13' to 18' (4,0 m to 5,5 m)
quarter-circle pattern nozzle
• R13-18T: 13' to 18' (4,0 m to 5,5 m)
third-circle pattern nozzle
• R13-18H: 13' to 18' (4,0 m to 5,5 m)
half-circle pattern nozzle
• R13-18TT: 13' to 18' (4,0 m to 5,5 m)
two-thirds-circle pattern nozzle
• R13-18TQ: 13' to 18' (4,0 m to 5,5 m)
three-quarter-circle pattern nozzle
• R13-18F: 13' to 18' (4,0 m to 5,5 m)
full-circle pattern nozzle
• R17-24Q: 17' to 24' (5,2 m to 7,3 m)
quarter-circle pattern nozzle
• R17-24T: 17' to 24' (5,2 m to 7,3 m)
third-circle pattern nozzle
• R17-24H: 17' to 24' (5,2 m to 7,3 m)
half-circle pattern nozzle
• R17-24TT: 17' to 24' (5,2 m to 7,3 m)
two-thirds-circle pattern nozzle
• R17-24TQ: 17' to 24' (5,2 m to 7,3 m)
three-quarter-circle pattern nozzle
• R17-24F: 17' to 24' (5,2 m to 7,3 m)
full-circle pattern nozzle
1804-SAM-R13-18Q
Model
1804
Optional
Feature
SAM
Pattern
F=Full
TQ=Three-quarter
TT=Two-thirds
H=Half
T=Third
Q=Quarter
Radius Range
13'-18' (4,0-5,5 m)
17'-24' (5,2-7,3 m)
Note: Specify sprinkler bodies and nozzles
separately. Installation on Rain Bird
1800®- SAM Spray Heads recommended
in sandy environments.
How to Specify
Nozzle
Rotary
Nozzle
R17-24Q
50
Rotary Nozzles
R13-18H
www.rainbird.com
2005 – 2006 Catalog
Rotary Nozzles
R13-18 Series (Black)
Arc
R13-18F
R13-18TQ
R13-18TT
R13-18H
R13-18T
R13-18Q
Pressure
psi
20
25
30
35
40
45
50
55
20
25
30
35
40
45
50
55
20
25
30
35
40
45
50
55
20
25
30
35
40
45
50
55
20
25
30
35
40
45
50
55
20
25
30
35
40
45
50
55
Radius
ft.
13
14
16
16
17
18
18
18
13
14
16
16
17
18
18
18
13
14
16
16
17
18
18
18
13
14
16
16
17
18
18
18
13
14
16
16
17
18
18
18
13
14
16
16
17
18
18
18
Flow
GPM
1.31
1.46
1.60
1.73
1.85
1.96
2.07
2.17
0.98
1.10
1.20
1.30
1.39
1.47
1.55
1.62
0.87
0.97
1.07
1.15
1.23
1.31
1.38
1.44
0.65
0.73
0.80
0.86
0.92
0.98
1.03
1.08
0.44
0.49
0.53
0.58
0.62
0.65
0.69
0.72
0.33
0.37
0.40
0.43
0.46
0.49
0.52
0.54
METRIC
■
▲
Precip
In/h
0.75
0.67
0.61
0.61
0.61
0.61
0.61
0.61
0.75
0.67
0.61
0.61
0.61
0.61
0.61
0.61
0.75
0.67
0.61
0.61
0.61
0.61
0.61
0.61
0.75
0.67
0.61
0.61
0.61
0.61
0.61
0.61
0.75
0.67
0.61
0.61
0.61
0.61
0.61
0.61
0.75
0.67
0.61
0.61
0.61
0.61
0.61
0.61
Precip
In/h
0.86
0.77
0.70
0.70
0.70
0.70
0.70
0.70
0.86
0.77
0.70
0.70
0.70
0.70
0.70
0.70
0.86
0.77
0.70
0.70
0.70
0.70
0.70
0.70
0.86
0.77
0.70
0.70
0.70
0.70
0.70
0.70
0.86
0.77
0.70
0.70
0.70
0.70
0.70
0.70
0.86
0.77
0.70
0.70
0.70
0.70
0.70
0.70
Note: Rotary Nozzles tested on 4 inch pop-ups. Performance data taken in
zero wind conditions.
Layout using square or triangular head-to-head (50%) spacing. Single row
applications are not recommended.
2005 – 2006 Catalog
Arc
R13-18F
R13-18TQ
R13-18TT
R13-18H
R13-18T
R13-18Q
Pressure
bars
1,4
1,7
2,1
2,4
2,8
3,1
3,4
3,8
1,4
1,7
2,1
2,4
2,8
3,1
3,4
3,8
1,4
1,7
2,1
2,4
2,8
3,1
3,4
3,8
1,4
1,7
2,1
2,4
2,8
3,1
3,4
3,8
1,4
1,7
2,1
2,4
2,8
3,1
3,4
3,8
1,4
1,7
2,1
2,4
2,8
3,1
3,4
3,8
Radius
m
4,0
4,3
4,8
5,0
5,2
5,4
5,5
5,6
4,0
4,3
4,8
5,0
5,2
5,4
5,5
5,6
4,0
4,3
4,8
5,0
5,2
5,4
5,5
5,6
4,0
4,3
4,8
5,0
5,2
5,4
5,5
5,6
4,0
4,3
4,8
5,0
5,2
5,4
5,5
5,6
4,0
4,3
4,8
5,0
5,2
5,4
5,5
5,6
Flow
m3⁄h
0,29
0,33
0,36
0,39
0,42
0,44
0,47
0,49
0,22
0,25
0,27
0,29
0,31
0,33
0,35
0,37
0,20
0,22
0,24
0,26
0,28
0,29
0,31
0,33
0,15
0,16
0,18
0,19
0,21
0,22
0,23
0,24
0,10
0,11
0,12
0,13
0,14
0,15
0,16
0,16
0,07
0,08
0,09
0,10
0,10
0,11
0,12
0,12
Flow
l/s
0,08
0,09
0,10
0,11
0,12
0,12
0,13
0,14
0,06
0,07
0,08
0,08
0,09
0,09
0,10
0,10
0,05
0,06
0,07
0,07
0,08
0,08
0,09
0,09
0,04
0,05
0,05
0,05
0,06
0,06
0,06
0,07
0,03
0,03
0,03
0,04
0,04
0,04
0,04
0,05
0,02
0,02
0,03
0,03
0,03
0,03
0,03
0,03
■
▲
Precip
mm/h
19
18
15
15
15
15
15
15
19
18
15
15
15
15
15
15
19
18
15
15
15
15
15
15
19
18
15
15
15
15
15
15
19
18
15
15
15
15
15
15
19
18
15
15
15
15
15
15
Precip
mm/h
22
21
18
18
18
18
18
18
22
21
18
18
18
18
18
18
22
21
18
18
18
18
18
18
22
21
18
18
18
18
18
18
22
21
18
18
18
18
18
18
22
21
18
18
18
18
18
18
Do not reduce radius below 13' (4,0 m) on the R13-18 model and below
17' (5,2 m) on the R17-24 model.
Installation on Rain Bird 1800®- SAM Spray Heads recommended in sandy
environments
www.rainbird.com
Rotary Nozzles
51
Rotary Nozzles
R17-24 Series (Yellow)
Arc
R17-24F
R17-24TQ
R17-24TT
R17-24H
R17-24T
R17-24Q
Pressure
psi
20
25
30
35
40
45
50
55
20
25
30
35
40
45
50
55
20
25
30
35
40
45
50
55
20
25
30
35
40
45
50
55
20
25
30
35
40
45
50
55
20
25
30
35
40
45
50
55
Radius
ft.
17
19
21
22
23
23
24
24
17
19
21
22
23
23
24
24
17
19
21
22
23
23
24
24
17
19
21
22
23
23
24
24
17
19
21
22
23
23
24
24
17
19
21
22
23
23
24
24
Flow
GPM
2.45
2.74
3.00
3.24
3.46
3.67
3.87
4.06
1.84
2.05
2.25
2.43
2.60
2.76
2.90
3.05
1.63
1.83
2.00
2.16
2.31
2.45
2.58
2.71
1.22
1.37
1.50
1.62
1.73
1.84
1.94
2.03
0.82
0.91
1.00
1.08
1.15
1.22
1.29
1.35
0.61
0.68
0.75
0.81
0.87
0.92
0.97
1.02
METRIC
■
▲
Precip
In/h
0.79
0.71
0.65
0.65
0.65
0.65
0.65
0.65
0.79
0.71
0.65
0.65
0.65
0.65
0.65
0.65
0.79
0.71
0.65
0.65
0.65
0.65
0.65
0.65
0.79
0.71
0.65
0.65
0.65
0.65
0.65
0.65
0.79
0.71
0.65
0.65
0.65
0.65
0.65
0.65
0.79
0.71
0.65
0.65
0.65
0.65
0.65
0.65
Precip
In/h
0.92
0.82
0.75
0.75
0.75
0.75
0.75
0.75
0.92
0.82
0.75
0.75
0.75
0.75
0.75
0.75
0.92
0.82
0.75
0.75
0.75
0.75
0.75
0.75
0.92
0.82
0.75
0.75
0.75
0.75
0.75
0.75
0.92
0.82
0.75
0.75
0.75
0.75
0.75
0.75
0.92
0.82
0.75
0.75
0.75
0.75
0.75
0.75
Note: Rotary Nozzles tested on 4 inch pop-ups. Performance data taken in
zero wind conditions.
Layout using square or triangular head-to-head (50%) spacing. Single row
applications are not recommended.
52
Rotary Nozzles
Arc
R17-24F
R17-24TQ
R17-24TT
R17-24H
R17-24T
R17-24Q
Pressure
bars
1,4
1,7
2,1
2,4
2,8
3,1
3,4
3,8
1,4
1,7
2,1
2,4
2,8
3,1
3,4
3,8
1,4
1,7
2,1
2,4
2,8
3,1
3,4
3,8
1,4
1,7
2,1
2,4
2,8
3,1
3,4
3,8
1,4
1,7
2,1
2,4
2,8
3,1
3,4
3,8
1,4
1,7
2,1
2,4
2,8
3,1
3,4
3,8
Radius
m
5,2
5,8
6,4
6,7
6,9
7,1
7,3
7,4
5,2
5,8
6,4
6,7
6,9
7,1
7,3
7,4
5,2
5,8
6,4
6,7
6,9
7,1
7,3
7,4
5,2
5,8
6,4
6,7
6,9
7,1
7,3
7,4
5,2
5,8
6,4
6,7
6,9
7,1
7,3
7,4
5,2
5,8
6,4
6,7
6,9
7,1
7,3
7,4
Flow
m3⁄h
0,55
0,62
0,68
0,73
0,78
0,83
0,87
0,91
0,41
0,46
0,51
0,55
0,59
0,62
0,65
0,69
0,37
0,41
0,45
0,49
0,52
0,55
0,58
0,61
0,28
0,31
0,34
0,36
0,39
0,41
0,44
0,46
0,18
0,21
0,23
0,24
0,26
0,28
0,29
0,30
0,14
0,15
0,17
0,18
0,20
0,21
0,22
0,23
Flow
l/s
0,15
0,17
0,19
0,20
0,22
0,23
0,24
0,25
0,11
0,13
0,14
0,15
0,16
0,17
0,18
0,19
0,10
0,11
0,13
0,14
0,14
0,15
0,16
0,17
0,08
0,09
0,09
0,10
0,11
0,11
0,12
0,13
0,05
0,06
0,06
0,07
0,07
0,08
0,08
0,08
0,04
0,04
0,05
0,05
0,05
0,06
0,06
0,06
■
▲
Precip
mm/h
20
18
16
16
16
16
16
16
20
18
16
16
16
16
16
16
20
18
16
16
16
16
16
16
20
18
16
16
16
16
16
16
20
18
16
16
16
16
16
16
20
18
16
16
16
16
16
16
Precip
mm/h
23
21
19
19
19
19
19
19
23
21
19
19
19
19
19
19
23
21
19
19
19
19
19
19
23
21
19
19
19
19
19
19
23
21
19
19
19
19
19
19
23
21
19
19
19
19
19
19
Do not reduce radius below 13' (4,0 m) on the R13-18 model and below
17' (5,2 m) on the R17-24 model.
Installation on Rain Bird 1800®- SAM Spray Heads recommended in sandy
environments
www.rainbird.com
2005 – 2006 Catalog
Spray Heads
Rotary
Nozzles
Rotors
Impacts
Rotors
Valves
Controllers
®
®
Central
Controls
Install Confidence.
Install Rain Bird Rotors.
™
™
Pump Stations
Xerigation®
Accessories
Resources
& Training
Reference
Rotors
1
2
3
4
5
6
7
8
9
54
Rotors
www.rainbird.com
2005 – 2006 Catalog
Rotors
Pop-Up Sprinkler Selection Guide
A sprinkler’s radius of throw is a key consideration in selecting a specific model. The chart below helps you make an initial choice among sprinklers in
the Rain Bird product line. This chart indicates the maximum radius of throw for each sprinkler type under zero wind conditions. The data refer to: the
smallest nozzle at the lowest charted pressure and the largest nozzle at the highest charted pressure.
1
15 to 35' (4,6 to 10,7 m)
3500 SERIES
2
25 to 50' (7,6 to 15,2 m)
5000/5000 PLUS SERIES
3
21 to 50' (6,4 to 15,2 m)
4
33 to 55' (10,0 to 16,7 m)
5500 Series
5
39 to 65' (11,9 to 19,8 m)
6
39 to 71' (11,9 to 21,7 m)
7
57 to 81' (17,4 to 24,7 m)
8005
8
2045A MAXI-PAW
22 to 45' (10,1 to 12,5 m)
®
9
41 to 83' (12,5 to 19,2 m)
A-SAM / AP SERIES
2005 – 2006 Catalog
www.rainbird.com
Rotors
55
Rotors
Major Products
Closed Case Rotors
3500
Series
Open Case Rotors
5000/5000
Plus Series
R-50
5500
Series
Falcon
6504
7005
8005
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
™
2045A
Maxi-Paw ™
A-SAM /
AP Series
•
•
•
Turfgrass 15' to 30'
•
Turfgrass 30' to 50'
Turfgrass more than 50'
Slopes
Ground Cover/Shrubs
•
•
Athletic Fields
High Wind Areas
Non-potable Water
56
•
•
Rotors
•
•
•
www.rainbird.com
•
•
•
2005 – 2006 Catalog
Rotors
FACT REPORT
Install Confidence.
Install Rain Bird®
Rain Curtain™ Technology.
Rain Curtain technology is only available on Rain Bird rotors, including
the 3500 Series, 5000 Series, 5500 Series, Falcon® 6504, 7005 and 8005.
Installsuperior
superiorwater
waterdistribution
distributionfor
forgreen
greengrass
grassresults.
results.
Install
Only Rain Bird® rotors have Rain Curtain™ nozzle technology that
features larger water droplets for resistance to windy conditions,
effective close-in watering to eliminate dry spots near the rotor
and even distribution over the entire radius range. In side-by-side
comparisons with the competition, the clear advantages of Rain
Curtain technology can be seen with the naked eye.
Rain Curtain Technology
How is Nozzle Performance Measured?
Scheduling Coefficient (SC) is one of the most accurate
ways to measure water distribution.
■ SC measures how much longer you must water the entire
area for the driest sections to receive sufficient water.
■ The lower the SC, the better the rotor distributes water.
An SC of 1.0 represents perfect uniformity. Tests show
that even rain has an SC greater than 1.0.**
■ Test results from side-by-side comparisons with
competitive nozzle products prove that Rain Curtain
technology consistently outperforms the competition
with the lowest scheduling coefficients—as low as 1.1.*
*Based on tests conducted at Rain Bird’s Product Research Center in Glendora, CA.
Test results reflect a comparison of Rain Bird’s products with those
of its principal competitors.**Based on a report published by
The Center for Irrigation Technology.
The Competition
Rotors tested at consistent psi with no physical disruption of the stream.
2005 – 2006 Catalog
www.rainbird.com
Rotors
57
Rotors
Installproven
provenRain
RainCurtain
Curtain™™technology
technology
Install
There are three elements which create the superior coverage
of Rain Curtain nozzle technology.
Short to Mid-Range Rain Curtain™ Nozzle Technology
[15-50 ft. (4,6-15,3 m)]
1
Large Droplets for Consistent Performance
Patent-Pending Micro-Ramps™ draw water off the main
stream, and gently divert it downward around the head
for superior close-in watering without seed washout.
Rain Curtain technology produces larger water droplets that
are far less susceptible to wind, and greatly minimizes misting and
airborne evaporation. This competitive advantage assures that the
right amount of water goes where it needs to go which saves time,
money and equally important, one of nature’s most valuable
resources.
Front view of nozzle
Back view of nozzle
Precisely Engineered Ramps, Angles and Radii
1) Create a cohesive stream for maximum distance of throw.
2
Effective Close-in Watering
2) Generate larger droplets that are less susceptible to wind and
airborne evaporation.
3) Deliver even water distribution across the entire radius range
for superior green grass results.
Long Range Rain Curtain™ Nozzle Technology
[40-81 ft. (12,2-24,7 m)]
Long-range
Watering Port
Effective and gentle close-in watering eliminates dry spots around
the rotor without seed washout.
Close-in
Watering Port
Even Distribution Over the Entire Radius
Mid-range
Watering Port
Rain Bird’s broad range of Rain Curtain nozzles [0.54-36.3 GPM
(0,12-8,24 m3/h), 15-81 ft. (4,6-24,7m)] is engineered to deliver
optimum distribution uniformity across the entire radius range.
This uniformity compensates for varying environmental conditions,
offering flexibility to the designer and assuring green grass results.
In Rain Bird large area rotors, Rain Curtain technology centers
around three watering ports that deliver long-range,mid-range
and close-in water for optimum distribution uniformity. This
uniformity across the entire radius range greatly diminishes
dependence on near-perfect head-to-head spacing, and
reduces the need to overwater because there are no gaps in
coverage. The close-in watering port features an expansion
chamber that actually takes energy out of that part of the
stream which is diverted downward around the head. By
reducing the velocity of the water by as much as 90%, effective
close-in watering is achieved. The close-in water flowing out of
the bottom of this port is distributed gently, even though the
rotor is operating at a relatively high flow and pressure.
3
▲
Call 1-800-RainBird (U.S. only) or visit www.rainbird.com for the name of your Rain Bird Distributor.
58
Rotors
www.rainbird.com
2005 – 2006 Catalog
Rotors
FAC T
R E P O RT
Install Confidence.
Install Rain Bird
5000 Series Rotors.
™
®
Installthe
thereliability
reliabilitythat
thattakes
takesperformance
performanceto
to the
the top.
top.
Install
5000 Series
Shrub 4", 6", 12"
(10,2; 15,2; 30,5 cm)
A rugged, mid-range gear-drive, the Rain Bird® 5000 Series Rotor
delivers unrivaled performance, is durable and features convenient
arc adjustment from the top. Specifically designed for residential,
commercial and athletic field installations with spacing up to 50'
(15,2 m), trust that this rotor is more reliable than the competition,
more robust and will continue to perform as promised year after
year. Here are just a few reasons why:
■ Rain Curtain™ nozzle trees, including eight nozzles
(angle of trajectory 25˚) and four low angle nozzles
(angle of trajectory 10˚), provide 25 to 50 feet (7,6 to
15,2 m) distance of throw.
■ Pressure-activated, multi-function wiper seal protects
internals from debris and assures positive pop-up
and retraction.
■ Five-year trade warranty reinforces Rain Bird’s
commitment to product integrity and assures customer
peace of mind.
■ Reversing full- and part-circle operation (up to 360˚)
in one unit.
■ Field-proven UV-resistant plastic and stainless steel
parts construction ensures long product life.
■ Reinforced flow path for additional side load strength.
2005 – 2006 Catalog
www.rainbird.com
Rotors
59
Rotors
Installthe
theproof.
proof.
Install
R
Rain Bird® and competitive rotors are routinely subjected to the most
stringent testing procedures in the industry. Test results from these
side-by-side comparisons prove that Rain Bird 5000 Series Rotors
consistently outperform the competition.*
3.8 Times More Reliable
R
16,000
R
Test Stopped at 14,328 cycles
■ effective close-in watering to eliminate
dry spots around the head
12,000
radius range
8,000
4,000
0
Rain Bird 5000
Hunter PGP
In side-by-side comparisons with the competition,
the performance advantages of Rain Curtain
Technology can actually be seen with the
naked eye.
ROTORS
The Accelerated Life Cycle Test is a measure of reliability.
Rotors continuously cycled at 75 psi (5,1 bars), one
minute on, one minute off.
1.7 Times More Robust
obust...
GRIT CYCLE TEST
R
a p i d In s t a l l . . .
Note: Rotors tested at consistent psi with no physical disruption of the stream.
300
Consider installing Rain Bird 5000 Series
Rotors with water-saving MPR nozzles.
200
100
0
Rain Bird 5000
Hunter PGP
ROTORS
The Grit Cycle Test is a measure of robustness—how
well a rotor operates when gritty water is utilized.
Rotors continuously cycled at 55 psi (3,7 bars), one
minute on, one minute off.
Annual water savings
per system (gallons)
3,278 x 30 =
■ makes money because more jobs can be completed
per day
■ reduces wear and tear on the thumbs because of
Cost of water
per gallon
enhanced design features
Rain Bird 5000 Series
Rapid installations are easily accomplished,
because Rain Bird 5000 Series Rotors feature
a slip clutch design—simply turn the turret by
hand when the system is not pressurized. Further
enhancing installation speed are nozzle insertion
and removal features, and the fact that 5000 Series
nozzles are keyed to ensure proper installation—not
off to one side or the other.
* Based on tests conducted at Rain Bird’s Product Research Center in
Glendora, CA. Test results reflect a comparison of Rain Bird’s 5004 rotor and
the Hunter PGP-4" rotor.
3,278
See for yourself how much
water you can save
Watering weeks
per year
■ saves time because jobs can be completed faster
Installing competitor rotors is slow, tedious work,
not to mention, outdated.
Total Gallons Per
Week Saved by
using MPR Nozzles*
Example
When compared to the competition, installing
Rain Bird 5000 Series Rotors is faster and easier as the
following photos illustrate. This in turn:
Rotors
Hunter PGP
Rain Bird 5000 Series Rotor
with Rain Curtain Technology
400
TIME
Grit Cycle Test results prove that
Rain Bird 5000 Series Rotors last 1.7
times longer than the competition.
As the following graph shows, the
Rain Bird 5000 Series Rotor average
time to failure is 345 hours. The
average time to failure for the
Hunter PGP is 204 hours.
60
■ larger water droplets for resistance to
■ even water distribution across the entire
CYCLES
Accelerated Life Cycle Test results
prove that Rain Bird 5000 Series
Rotors last nearly 3.8 times longer
than the competition. As the
following graph shows, the
Rain Bird 5000 Series Rotor’s
average cycle to failure is 13,469
cycles. The Hunter PGP average
cycle to failure is 3,547 cycles.
Only Rain Bird rotors have Rain Curtain
Nozzle Technology that features:
windy conditions
ACCELERATED LIFE CYCLE TEST
eliable...
a i n C u r t a i n™
No z z l e Te c h n o l o g y. . .
www.rainbird.com
30
98,340
$0.00125
(For your own calculation
use rates in your area)
Annual water savings
per system (dollars)
$0.00125 x 98,340 =
Hunter PGP
Calculate Your
Own Savings
$123
* Results in this calculation are based on four examples of typical residential
rotor zones using 3.0 nozzles at 35 feet spacing. The system is designed for an
area that requires one inch of water per week. Total water used per week with
MPR nozzles is 5,504 gallons. Total water used per week without MPR nozzles
is 8,782 gallons. Total savings are 3,278 gallons per week. If your system is
different, visit www.rainbird.com to determine your specific savings.
2005 – 2006 Catalog
Rotors
Part-Circle Rotor Pop-Up Sprinklers
3500 Series
Easy to Use, Tough to Beat
Primary Application
Residential and light commercial sites - spacing up to 35 feet
(10,7 m).
The 3500 Series Rotor is an easy to use short to mid-range 1⁄2” inlet
gear-drive rotor, offering value and convenience for residential &
light commercial applications. Utilizing a simple flat-bladed
screwdriver, the 3500’s arc adjustment is quick and easy.
This versatile rotor offers an attachable nozzle Tree with six superior
performing Rain Curtain nozzles and the convenience of reversing
full- and part-circle operation (up to 360 degrees) in one unit. Plus,
a nozzle removal feature and easily removable filter screen makes
maintainance a breeze.
All of this, an affordable price and a 3-year trade warranty makes
the 3500 Series one rotor that is easy to use and tough to beat!
Features
• The 3500 Series Rotor is available in Shrub, 4" and SAM ™ models.
• Top-adjust arc adjustment requiring only a flat bladed screwdriver
• Water-lubricated gear-drive design for durable, reliable operation
• 40- 360° Part-circle arc rotation and reversing full-circle rotation
in one
• Attached nozzle tree of six Rain Curtain nozzles.
• Radius adjustment screw allows up to 35% radius reduction
without changing nozzles
• True 4" (10,2 cm) pop-up (measured from the cover to the nozzle)
• Quick Check Arc/Fast Forward
• Dual action, positive stop wiper seal protects internals from debris
and assures positive pop-up and retraction
• Self-adjusting stator does not require replacement when changing
nozzles
• Easily removable filter screen
• Nozzle removal feature
3504-PC
3500-S
3504 - S - PC - SAM - N
2005 – 2006 Catalog
www.rainbird.com
Options
SAM;
Non-potable cover
How to Specify
Options
• Optional non-potable cover for easy identification of reclaimed
water
• Optional Seal-A-Matic™ (SAM™)check valve holds up to 7 feet (2,1
m) of elevation change, to prevent puddling and erosion caused by
low head drainage
Rotation
Part-circle
Model
Shrub
Model
3500 Series 4" pop-up
Note: 3504 will soon be available with a
pre-installed nozzle.
Rotors
61
Rotors
3500 Series
Continued
3500 Nozzle Performance
Operating Range
• Precipitation rate: .37 to .83 inches per hour (9 to 22 mm/h)
• Radius: 15 to 35 feet (4,6 to 10,7 m)
• Radius may be reduced up to 35% with Radius Reduction
Screw
• Pressure: 25-55 psi (1,7 to 3,8 bars)
• Flow Rate: .54 to 4.6 GPM (,12 to 1,04 m3/h)
Nozzle
Radius
ft.
Flow
GPM
Precip
In/h
Precip
In/h
25
0.75
1.0
1.5
2.0
3.0
4.0
0.75
1.0
1.5
2.0
3.0
4.0
0.75
1.0
1.5
2.0
3.0
4.0
0.75
1.0
1.5
2.0
3.0
4.0
15
20
23
27
29
31
17
21
23
27
31
33
17
21
24
27
31
35
18
22
24
28
32
35
0.54
0.77
1.06
1.40
2.17
2.97
0.67
0.92
1.28
1.69
2.60
3.58
0.77
1.06
1.48
1.93
3.00
4.13
0.85
1.18
1.65
2.15
3.25
4.60
0.46
0.37
0.39
0.37
0.50
0.59
0.45
0.40
0.47
0.45
0.52
0.63
0.51
0.46
0.49
0.51
0.60
0.65
0.51
0.47
0.55
0.53
0.61
0.72
0.53
0.43
0.45
0.43
0.57
0.69
0.52
0.46
0.54
0.52
0.60
0.73
0.59
0.53
0.57
0.59
0.69
0.75
0.58
0.54
0.64
0.61
0.71
0.83
35
Note: Pop-up height measured from the cover to the nozzle. Overall body
height is measured popped down.
Models
Part-circle units (PC) are adjustable from 40 -360 degrees.
• 3504-PC
• 3500-S
• 3504-PC-N
• 3500-S-SAM
• 3504-PC-SAM
• 3500-S-SAM-NP
• 3504-PC-SAM-N
▲
Pressure
psi
Specifications
• 1⁄2" NPT female bottom threaded inlet
• Full- and Part-circle adjustment 40° - 360°
Dimensions
• Pop up height: Shrub: 4" (10,2 cm); 4" (10,2 cm)
• Overall body height: Shrub: 7" (18 cm); 4": 6.6" (16,8 cm)
• Exposed surface diameter: 1.16" (2,9 cm)
■
45
55
Precipitation Rates based on half-circle operation.
Performance data collected in zero wind conditions.
62
Rotors
www.rainbird.com
2005 – 2006 Catalog
Rotors
METRIC
■
▲
■
▲
Pressure
bars
Nozzle Radius Flow
m
m3⁄h
Flow
l/s
Precip Precip
mm/h mm/h
Pressure
bars
Nozzle Radius Flow
m
m3⁄h
Flow
l/s
Precip Precip
mm/h mm/h
1,7
0,75
1,0
1,5
2,0
3,0
4,0
0,75
1,0
1,5
2,0
3,0
4,0
0,75
1,0
1,5
2,0
3,0
4,0
0,03
0,05
0,07
0,09
0,14
0,19
0,04
0,05
0,07
0,09
0,15
0,20
0,04
0,06
0,08
0,11
0,17
0,23
12
9
10
9
13
15
12
10
11
10
13
16
12
10
12
12
13
16
3,0
0,75
1,0
1,5
2,0
3,0
4,0
0,75
1,0
1,5
2,0
3,0
4,0
0,75
1,0
1,5
2,0
3,0
4,0
0,05
0,07
0,09
0,12
0,19
0,26
0,05
0,07
0,10
0,13
0,20
0,28
0,05
0,07
0,10
0,14
0,21
0,29
13
12
12
13
15
16
13
12
13
13
15
18
13
12
14
13
16
18
2,0
2,5
4,6
6,1
7,0
8,2
8,8
9,4
4,8
6,2
7,0
8,2
9,1
9,7
5,2
6,4
7,0
8,2
9,4
10,1
0,12
0,17
0,24
0,32
0,49
0,67
0,13
0,19
0,26
0,34
0,53
0,73
0,16
0,21
0,30
0,39
0,60
0,83
14
11
11
11
15
17
13
11
12
12
15
18
13
12
14
13
16
19
3,5
3,8
5,2
6,4
7,3
8,2
9,4
10,6
5,4
6,6
7,3
8,4
9,6
10,7
5,5
6,7
7,3
8,5
9,8
10,7
0,17
0,24
0,33
0,43
0,67
0,92
0,19
0,26
0,36
0,47
0,71
1,00
0,19
0,27
0,37
0,49
0,74
1,04
15
13
14
15
17
19
15
14
15
15
18
20
15
14
16
15
18
21
2005 – 2006 Catalog
www.rainbird.com
Rotors
63
Rotors
Full- or Part-Circle Rotor Pop-Up Sprinklers
5000/5000 Plus Series
The Next Evolution in Rotor Performance
Primary Application
Residential, commercial and athletic field sites - spacing up to 50
feet (15,2 m).
The 5000/5000 Plus Series mid-range rotor compliments
Rain Bird’s already strong Top Adjust Rotor Family, by offering
greater durability, enhanced Rain Curtain™ Nozzles and the
superiority of Stream Control™ Technology (5000 Plus only).
Features
• The 5000 Plus Series Rotor is available in 4", 6", 12", Shrub, and
Stainless Steel models (5000 Plus 4" & 6" only).
• Standard rubber cover for extra protection. 5000 Plus features a
green cover while the 5000 features a black cover.
• Heavy-duty cover assembly for extra durability in residential or
commercial applications
• Enhanced Rain Curtain ™ Nozzles
• Increased radius range with less flow per nozzle
• New Micro-Ramps ™ for superior close-in watering
• Nozzle extraction feature for easy rotor maintenance
• The 5000 Plus features Stream Control ™ Technology (SCT) with
Flow Shut-off capabilities
• Flow Shut-Off device (cone valve ™) integrated into the flow
path of the rotor assures maximum stream efficiency
• Flow Path to Nozzle Bore transition radius minimizes pressure
loss and assures peak nozzle performance
• Smoothed Flow Path entrance increases the maximum flow
capabilities
• Slip clutch mechanism for vandal resistance.
• Debris Sentry ™, integrated into the turret of the rotor, protects the
internals from debris
• Heavy-duty retract spring assures positive pop-down
• Tree of nozzles including four low angle (Angle of Trajectory 10º)
and eight standard angle Rain Curtain ™ Nozzles (Angle of Trajectory
25º) provides 25 to 50 (7,6 to 15,2 m) distance of throw
• New MPR nozzle set simplifies design and installation by providing
matched precipitation from 25' to 35'
• Top-adjust arc adjustment requiring only a flat-blade screwdriver
• Five-year trade warranty
5012-PL-FC, 5006-PL-FC,
5004-PL-FC, 5000-S-PL-FC
NEW
Options
SAM; Nonpotable cover
Rotation
“PC” for 40-360 degrees
“FC” for 360 degree only
Model
Plus
Model
Shrub
Model
5000 Series 4" pop-up
64
Model
Stainless
Steel
How to Specify
5004-S-PL-PC-SAM-N-SS
Rotors
5006-PL-FC-SS
www.rainbird.com
2005 – 2006 Catalog
Rotors
• 40 - 360° Arc Rotation and reversing full circle rotation in one. (A
non-reversing full circle only unit is also available)
• Radius adjustment screw allows up to 25% radius reduction
without changing nozzles
• True 4" (10 cm) pop-up (measured from the cover to the nozzle)
• Pressure-activated multi-function wiper seal protects internals
from debris and assures positive pop-up and retraction
• Reinforced flow path for additional side load strength
• Additional O-rings and seals for extra protection in “gritty” water
• Optional stainless steel riser helps deter vandalism on public turf
areas (4" and 6" 5000 Plus only)
• Optional pre-installed Rain Curtain ™ nozzle
• Optional Seal-A-Matic (SAM) ™ check valve holds up to 7 feet
(2,1 m) of elevation change, to prevent puddling and erosion
caused by low head drainage
• Optional non-potable purple cover for easy identification of
reclaimed water
Operating Range
• Precipitation rate: .20 to 1.01 inches per hour (5 to 26 mm/h)
• Radius may be reduced up to 25% with radius reduction screw
• Flow Rate: .73 to 9.63 GPM (0,17 to 2,19 m3/h)
Dimensions
• Pop-up height: Shrub: 4" (10 cm); 4" (10 cm); 6" (15 cm);
12" (30 cm);
• Overall body height: Shrub: 7 3⁄4" (19,7cm) 4": 7 3⁄8" (18, 5 cm); 6":
9 5⁄8" (24,5 cm); 12": 16 7⁄8" (42,9 cm)
• Exposed surface diameter: 1 5⁄8" (4,1 cm)
Note: Pop-up height measured from the cover to the nozzle. Overall body height is
measured popped down.
Models
Part-Circle units (PC) are adjustable from 40 –360 degrees.
Full-Circle units (FC) are 360 degrees only.
• 5000-S-(PC or FC)-(SAM)-(NP)
• 5004-(PC or FC)-(SAM)-(NP)
• 5006-(PC or FC)-(SAM)-(NP)
• 5012-(PC or FC)-(SAM)-(NP)
• 5000-S-PL-(PC or FC)-(SAM)-(NP)
• 5004-PL-(PC or FC)-(SAM)-(NP)
Note: All models are available with a 2.0 or 3.0 nozzle pre-installed.
Specifications
• ⁄4" (20/27) NPT female bottom threaded inlet
• Reversing full and part circle adjustment 40° – 360°
• Full circle only adjustment 360°
3
2005 – 2006 Catalog
www.rainbird.com
Rotors
65
Rotors
5000/5000 Plus Standard Angle Rain Curtain Nozzle Performance
■
▲
■
▲
Pressure
psi
Nozzle
Radius
ft.
Flow
GPM
Precip
In/h
Precip
In/h
Pressure
psi
Nozzle
Radius
ft.
Flow
GPM
Precip
In/h
Precip
In/h
25
1.5
2.0
2.5
3.0
4.0
5.0
6.0
8.0
1.5
2.0
2.5
3.0
4.0
5.0
6.0
8.0
1.5
2.0
2.5
3.0
4.0
5.0
6.0
8.0
33
35
35
36
37
39
39
36
34
36
37
38
40
41
43
43
35
37
37
40
42
45
46
47
1.12
1.50
1.81
2.26
2.91
3.72
4.25
5.90
1.35
1.81
2.17
2.71
3.50
4.47
5.23
7.06
1.54
2.07
2.51
3.09
4.01
5.09
6.01
8.03
0.20
0.24
0.28
0.34
0.41
0.47
0.54
0.88
0.22
0.27
0.31
0.36
0.42
0.51
0.54
0.74
0.24
0.29
0.35
0.37
0.44
0.48
0.55
0.70
0.23
0.27
0.33
0.39
0.47
0.54
0.62
1.01
0.26
0.31
0.35
0.42
0.49
0.59
0.63
0.85
0.28
0.34
0.41
0.43
0.51
0.56
0.63
0.81
55
1.5
2.0
2.5
3.0
4.0
5.0
6.0
8.0
1.5
2.0
2.5
3.0
4.0
5.0
6.0
8.0
35
37
37
40
42
45
47
50
34
35
37
40
42
45
48
50
1.71
2.30
2.76
3.47
4.44
5.66
6.63
8.86
1.86
2.52
3.01
3.78
4.83
6.16
7.22
9.63
0.27
0.32
0.39
0.42
0.48
0.54
0.58
0.68
0.31
0.40
0.42
0.45
0.53
0.59
0.60
0.74
0.31
0.37
0.45
0.48
0.56
0.62
0.67
0.79
0.36
0.46
0.49
0.53
0.61
0.68
0.70
0.86
35
45
65
66
Rotors
www.rainbird.com
2005 – 2006 Catalog
Rotors
5000/5000 Plus Standard Angle Rain Curtain Nozzle Performance
Pressure
bars
Nozzle
Radius Flow
m
m3⁄h
Flow
l/s
■
▲
Precip Precip
mm/h mm/h
1,7
1,5
2,0
2,5
3,0
4,0
5,0
6,0
8,0
1,5
2,0
2,5
3,0
4,0
5,0
6,0
8,0
1,5
2,0
2,5
3,0
4,0
5,0
6,0
8,0
1,5
2,0
2,5
3,0
4,0
5,0
6,0
8,0
10,10
10,70
10,70
11,00
11,3
11,90
11,90
11,00
10,20
10,80
10,90
11,20
11,6
12,10
12,40
11,80
10,40
11,00
11,30
11,20
12,3
12,70
13,20
13,30
10,60
11,20
11,30
12,10
12,7
13,50
13,90
14,10
0,07
0,09
0,11
0,14
0,18
0,23
0,27
0,37
0,08
0,10
0,12
0,15
0,20
0,25
0,29
0,40
0,09
0,11
0,14
0,17
0,22
0,29
0,34
0,45
0,10
0,13
0,16
0,19
0,25
0,31
0,37
0,50
5
6
7
8
10
12
14
22
5
6
7
9
11
12
14
21
6
7
8
9
11
13
14
19
6
7
9
9
11
12
14
18
2,0
2,5
3,0
0,25
0,34
0,41
0,51
0,66
0,84
0,97
1,34
0,28
0,36
0,44
0,55
0,71
0,91
1,05
1,45
0,31
0,41
0,50
0,62
0,81
1,03
1,21
1,63
0,34
0,45
0,56
0,69
0,89
1,13
1,34
1,79
6
7
8
10
12
14
16
26
6
7
9
10
12
14
16
24
7
8
9
11
13
15
16
21
7
8
10
11
13
14
16
21
METRIC
Pressure
bars
Nozzle
Radius Flow
m
m3⁄h
Flow
l/s
■
▲
Precip Precip
mm/h mm/h
3,5
1,5
2,0
2,5
3,0
4,0
5,0
6,0
8,0
1,5
2,0
2,5
3,0
4,0
5,0
6,0
8,0
1,5
2,0
2,5
3,0
4,0
5,0
6,0
8,0
10,70
11,30
11,30
12,20
12,8
13,70
14,20
14,90
10,60
11,10
11,30
12,20
12,8
13,70
14,90
15,20
10,40
10,70
11,30
12,20
12,8
13,70
14,60
15,20
0,10
0,14
0,17
0,21
0,27
0,34
0,40
0,54
0,11
0,15
0,18
0,22
0,29
0,37
0,43
0,57
0,12
0,15
0,19
0,23
0,30
0,39
0,47
0,61
7
8
9
10
12
13
14
18
7
8
10
11
13
14
15
18
8
10
11
11
13
15
15
19
4,0
4,5
0,37
0,49
0,60
0,74
0,97
1,23
1,45
1,93
0,40
0,52
0,64
0,80
1,04
1,32
1,55
2,06
0,42
0,55
0,68
0,84
1,10
1,40
1,64
2,19
8
9
11
12
14
15
17
20
8
10
12
12
15
16
17
21
9
11
12
13
15
17
18
22
2005 – 2006 Catalog
www.rainbird.com
Rotors
67
Rotors
5000/5000 Plus Low Angle Nozzle Performance
■
▲
METRIC
Pressure
psi
Nozzle
Radius
ft.
Flow
GPM
Precip
In/h
Precip
In/h
Pressure
bars
Nozzle
Radius Flow
m
m3⁄h
Flow
l/s
■
▲
Precip Precip
mm/h mm/h
25
1.0 LA
1.5 LA
2.0 LA
3.0 LA
1.0 LA
1.5 LA
2.0 LA
3.0 LA
1.0 LA
1.5 LA
2.0 LA
3.0 LA
1.0 LA
1.5 LA
2.0 LA
3.0 LA
1.0 LA
1.5 LA
2.0 LA
3.0 LA
25
27
29
29
28
30
31
33
29
31
32
35
29
31
33
36
29
31
33
36
0.76
1.15
1.47
2.23
0.92
1.38
1.77
2.68
1.05
1.58
2.02
3.07
1.17
1.76
2.24
3.41
1.27
1.92
2.45
3.72
0.23
0.30
0.34
0.51
0.23
0.30
0.35
0.47
0.24
0.32
0.38
0.48
0.27
0.35
0.40
0.51
0.29
0.38
0.43
0.55
0.27
0.35
0.39
0.59
0.26
0.34
0.41
0.55
0.28
0.37
0.44
0.56
0.31
0.41
0.46
0.58
0.34
0.44
0.50
0.64
1,7
1,0 LA
1,5 LA
2,0 LA
3,0 LA
1,0 LA
1,5 LA
2,0 LA
3,0 LA
1,0 LA
1,5 LA
2,0 LA
3,0 LA
1,0 LA
1,5 LA
2,0 LA
3,0 LA
1,0 LA
1,5 LA
2,0 LA
3,0 LA
1,0 LA
1,5 LA
2,0 LA
3,0 LA
1,0 LA
1,5 LA
2,0 LA
3,0 LA
7,60
8,20
8,80
8,80
8,00
8,60
9,10
9,30
8,60
9,20
9,50
10,10
8,80
9,40
9,70
10,60
8,80
9,40
9,90
10,80
8,80
9,40
10,10
11,00
8,80
9,40
10,10
11,00
0,05
0,07
0,09
0,14
0,05
0,08
0,10
0,15
0,06
0,09
0,11
0,17
0,06
0,10
0,13
0,19
0,07
0,11
0,14
0,21
0,07
0,11
0,15
0,22
0,08
0,12
0,15
0,23
6
8
9
13
6
8
9
13
5
8
9
12
6
8
10
12
6
9
10
13
7
9
10
13
7
10
11
14
35
45
55
65
2,0
2,5
3,0
3,5
4,0
4,5
0,17
0,26
0,33
0,51
0,18
0,28
0,36
0,55
0,20
0,32
0,41
0,62
0,22
0,35
0,45
0,68
0,24
0,38
0,49
0,74
0,26
0,41
0,52
0,80
0,27
0,44
0,56
0,84
7
9
10
15
6
9
10
15
6
9
10
14
7
9
11
14
7
10
11
15
8
11
12
15
8
11
13
16
68
Rotors
www.rainbird.com
2005 – 2006 Catalog
Rotors
Rotor Nozzles
NEW
5000/5000 Plus MPR Nozzles
Achieve Matched Precipitation Rate Between 25' and 35'
Primary Application
Rain Bird 5000/5000 Plus MPR Nozzles simplify both the design
process and the installation of rotors, because they reliably deliver
matched precipitation rates within and between rotor radii from 25'
to 35'. Without having to use fixed arc plates, designers and
installers can achieve MPR using either 5000 Series or 5000 Plus
Series Rotors. Superior flexibility in arc adjustment minimizes the
risks of over- or under-watering.
Features
• Three Nozzle trees of 25', 30', and 35' (7,6 m, 9,1 m, 10,7 m) radii
• Each tree contains a Q (90°), T (120°), H (180°), and F (360°) Nozzle
• No fixed arc plate required
• Compatible with both the 5000 and 5000 Plus Rotor Series
• Rain Curtain™ Technology provides:
- Large droplets for consistent performance
- Effective close-in watering
- Even distribution over the entire radius
• Precipitation rate of 0.60 in/hr (15,2 mm/hr) reduces run-off and
erosion
• Color-coded by radius for easy identification
• Nozzles are easy to insert and remove
• Stackable Nozzle trees for convenient storage
Models
• 5000-MPR-25: Tree of nozzles for 25-foot radius with
Q, T, H, F Nozzles attached
5000/5000 Plus MPR Nozzles
How to Specify
5000 - MPR - 25 - Q
2005 – 2006 Catalog
www.rainbird.com
Pattern
Q=Quarter
T=Third
H=Half
F=Full
Model
Rotor
Radius Range
25'
30'
35'
Nozzle
Matched
Precipitation Rate
Rotors
69
Rotors
5000-MPR-25 (Red)
■
▲
METRIC
■
▲
Nozzle
Pressure Radius
psi
ft.
Flow
GPM
Precip
In/h
Precip
In/h
Nozzle
bars
m
m3⁄h
Flow
l/s
Precip Precip
mm/h mm/h
Quarter
25
35
45
55
65
25
35
45
55
65
25
35
45
55
65
25
35
45
55
65
0.74
0.88
1.00
1.11
1.21
1.00
1.21
1.38
1.53
1.67
1.44
1.73
1.98
2.21
2.41
2.78
3.34
3.82
4.25
4.63
0.54
0.59
0.62
0.68
0.75
0.55
0.61
0.64
0.71
0.77
0.52
0.58
0.61
0.68
0.74
0.51
0.56
0.59
0.65
0.71
0.62
0.68
0.71
0.79
0.86
0.63
0.70
0.74
0.82
0.89
0.61
0.67
0.70
0.79
0.86
0.58
0.64
0.68
0.76
0.82
Quarter
1,7
2,4
3,1
3,8
4,5
1,7
2,4
3,1
3,8
4,5
1,7
2,4
3,1
3,8
4,5
1,7
2,4
3,1
3,8
4,5
0,05
0,06
0,06
0,07
0,08
0,06
0,08
0,09
0,10
0,11
0,09
0,11
0,12
0,14
0,15
0,18
0,21
0,24
0,27
0,29
13,7
14,9
15,6
17,4
18,9
13,9
15,4
16,2
18,0
19,6
13,3
14,7
15,5
17,3
18,9
12,8
14,2
14,9
16,6
18,1
15,8
17,3
18,1
20,1
21,9
16,0
17,8
18,7
20,7
22,6
15,4
17,0
17,9
20,0
21,8
14,8
16,4
17,3
19,2
20,9
■
▲
METRIC
■
▲
Third
Half
Full
23
24
25
25
25
23
24
25
25
25
23
24
25
25
25
23
24
25
25
25
Third
Half
Full
7,0
7,3
7,6
7,6
7,6
7,0
7,3
7,6
7,6
7,6
7,0
7,3
7,6
7,6
7,6
7,0
7,3
7,6
7,6
7,6
0,17
0,20
0,23
0,25
0,27
0,23
0,27
0,31
0,35
0,38
0,33
0,39
0,45
0,50
0,55
0,63
0,76
0,87
0,97
1,05
5000-MPR-30 (Green)
Nozzle
Pressure Radius
psi
ft.
Flow
GPM
Precip
In/h
Precip
In/h
Nozzle
bars
m
m3⁄h
Flow
l/s
Precip Precip
mm/h mm/h
Quarter
25
35
45
55
65
25
35
45
55
65
25
35
45
55
65
25
35
45
55
65
1.03
1.23
1.40
1.56
1.69
1.34
1.62
1.85
2.06
2.24
2.15
2.59
2.96
3.30
3.60
4.24
5.08
5.78
6.39
6.92
0.47
0.53
0.60
0.67
0.72
0.46
0.52
0.59
0.66
0.72
0.49
0.55
0.63
0.71
0.77
0.49
0.54
0.62
0.68
0.74
0.54
0.61
0.69
0.77
0.83
0.53
0.60
0.69
0.76
0.83
0.57
0.64
0.73
0.82
0.89
0.56
0.63
0.71
0.79
0.85
Quarter
1,7
2,4
3,1
3,8
4,5
1,7
2,4
3,1
3,8
4,5
1,7
2,4
3,1
3,8
4,5
1,7
2,4
3,1
3,8
4,5
0,06
0,08
0,09
0,10
0,11
0,08
0,10
0,12
0,13
0,14
0,14
0,16
0,19
0,21
0,23
0,27
0,32
0,36
0,40
0,44
12,0
13,4
15,2
17,0
18,4
11,7
13,2
15,1
16,8
18,3
12,5
14,1
16,1
17,9
19,6
12,3
13,8
15,7
17,4
18,8
Third
Half
Full
29
30
30
30
30
29
30
30
30
30
29
30
30
30
30
29
30
30
30
30
70
Rotors
Third
Half
Full
8,8
9,1
9,1
9,1
9,1
8,8
9,1
9,1
9,1
9,1
8,8
9,1
9,1
9,1
9,1
8,8
9,1
9,1
9,1
9,1
0,23
0,28
0,32
0,35
0,38
0,30
0,37
0,42
0,47
0,51
0,49
0,59
0,67
0,75
0,82
0,96
1,15
1,31
1,45
1,57
13,8
15,4
17,6
19,6
21,2
13,5
15,2
17,4
19,4
21,1
14,4
16,2
18,6
20,7
22,6
14,2
15,9
18,1
20,0
21,7
www.rainbird.com
2005 – 2006 Catalog
Rotors
5000-MPR-35 (Beige)
■
▲
METRIC
■
▲
Nozzle
Pressure Radius
psi
ft.
Flow
GPM
Precip
In/h
Precip
In/h
Nozzle
bars
m
m3⁄h
Flow
l/s
Precip Precip
mm/h mm/h
Quarter
25
35
45
55
65
25
35
45
55
65
25
35
45
55
65
25
35
45
55
65
1.40
1.67
1.92
2.13
2.31
1.77
2.15
2.46
2.74
2.99
2.75
3.33
3.81
4.23
4.62
5.36
6.62
7.58
8.43
9.18
0.53
0.56
0.60
0.67
0.73
0.50
0.54
0.58
0.65
0.70
0.52
0.55
0.60
0.66
0.73
0.50
0.55
0.60
0.66
0.72
0.61
0.64
0.70
0.77
0.84
0.58
0.62
0.67
0.75
0.81
0.60
0.64
0.69
0.77
0.84
0.58
0.64
0.69
0.76
0.83
Quarter
1,7
2,4
3,1
3,8
4,5
1,7
2,4
3,1
3,8
4,5
1,7
2,4
3,1
3,8
4,5
1,7
2,4
3,1
3,8
4,5
0,09
0,11
0,12
0,13
0,15
0,11
0,14
0,16
0,17
0,19
0,17
0,21
0,24
0,27
0,29
0,34
0,42
0,48
0,53
0,58
13,4
14,1
15,3
17,0
18,4
12,7
13,6
14,7
16,4
17,9
13,1
14,1
15,2
16,9
18,4
12,8
14,0
15,1
16,8
18,3
Third
Half
Full
32
34
35
35
35
32
34
35
35
35
32
34
35
35
35
32
34
35
35
35
Third
Half
Full
9,8
10,4
10,7
10,7
10,7
9,8
10,4
10,7
10,7
10,7
9,8
10,4
10,7
10,7
10,7
9,8
10,4
10,7
10,7
10,7
0,32
0,38
0,44
0,48
0,52
0,40
0,49
0,56
0,62
0,68
0,62
0,76
0,87
0,96
1,05
1,22
1,50
1,72
1,91
2,09
15,4
16,3
17,7
19,6
21,3
14,6
15,8
17,0
18,9
20,7
15,2
16,3
17,6
19,5
21,3
14,8
16,2
17,5
19,4
21,2
2005 – 2006 Catalog
www.rainbird.com
Rotors
71
Rotors
Full- or Part-Circle Rotor Pop-Up Sprinkler
R-50
Primary Application
Heavy-duty, closed-case rotor designed for residential and light
commercial applications, especially where high durability and
built-in vandalism protection are important.
Features
• Easy arc adjustment requires no tools.
• Water-lubricated, non-strippable drive provides durability for a
longer product life.
• 25° to 350° part-circle operation or non-reversing full-circle
operation in one unit.
• 5 Rain Curtain™ nozzles.
• 5 Radius+ nozzles provide for maximum radius.
• Radius adjustment screw allows up to 25% radius reduction without
changing nozzles.
• Memory Arc® quickly and automatically returns nozzle stream to set
arc if tampered with.
• Unique Quick Flush™ action cleans stem on initial pop-up and final
retraction.
• Adjustable bypass allows flow adjustment to optimize drive at
varying pressure.
• Inlet filter screen and dual spring bearings ensure dirty water
performance.
• Low angle (11°) body available.
• Low-pressure and low-gallonage operation.
• 35⁄8" (9,2 cm) pop-up height.
• Patented, pressure-activated, multi-function wiper seal protects
internal assembly from debris to ensure positive pop-up and
retraction.
R-50 SAM-RC-LA-2.0
Model
R-50 SAM
Optional
Feature
Low Angle
Body
Optional Feature
Rubber Cover
72
How to Specify
Nozzle Size
2.0
Rotors
R-50
www.rainbird.com
2005 – 2006 Catalog
Rotors
Options
• Optional internal Seal-A-Matic™ (SAM) holds back 8 feet of
elevation change to prevent puddling and erosion caused by low
head drainage
• Optional, durable, two-piece rubber cover for added safety sold
separately (standard on SAM models).
• Vandal-resistant, stainless steel locking set screw at cap threads
on SAM models.
• Optional, non-potable water cap for easy identification of reclaimed
water sold separately.
Operating Range
• Precipitation rate: 0.27 to 1.52 inches per hour (6,8 to 38,6 mm/h)
• Flow: 1. 5 to 9.4 GPM (0, 36 to 2,09 m3/h; 0,10 to 0,58 l/s)
Models
• R-50
• R-50-LA
• R-50-SAM
• R-50-SAM-LA
Available Nozzles
• Standard trajectory— Rain Curtain™ nozzles
• 1.5, 2.0, 3.0, 4. 0, and 6. 0
• Standard trajectory—Radius+ nozzles
• 1.5, 2.0, 3.0, 4. 0, and 6. 0
• Low angle trajectory—Rain Curtain nozzles
• 1.5, 2.0, 3.0, 4. 0, and 6. 0 Rain Curtain nozzles
• Low angle trajectory—Radius+ nozzles
• 1.5, 2.0, 3.0, 4.0, and 6.0
Specifications
• ⁄4" (20/27) FNPT bottom inlet
• Radius+ and Rain Curtain™ nozzles: 1.5-black; 2.0-brown;
3.0-gray; 4.0-yellow; 6.0-green
• Nozzle outlet trajectory is 23°.
• LA nozzle outlet trajectory is 11°.
3
Dimensions
• Pop-up height 35⁄8" (9,2 cm)
• Overall height: 71⁄4" (18,4 cm)
• Exposed surface diameter: 13⁄4" (4,4 cm)
Note: Overall body height is measured popped down.
Radius+ Nozzles provide the longest radius
possible with good distribution efficiency.
Rain Curtain Nozzles provide superior
coverage, especially close-in.
2005 – 2006 Catalog
www.rainbird.com
Rotors
73
Rotors
R-50 / R-50 SAM Performance with Rain Curtain ™ Nozzles
METRIC
Pressure
psi
25
35
45
55
60
Nozzle
• 2.01.5
• 3.0
• 4.0
• 6.0
• 1.5
• 2.0
• 3.0
• 4.0
• 6.0
• 1.5
• 2.0
• 3.0
• 4.0
• 6.0
• 1.5
• 2.0
• 3.0
• 4.0
• 6.0
• 1.5
• 2.0
• 3.0
• 4.0
• 6.0
•
■
▲
■
Radius
ft.
Flow
GPM
Precip
In/h
Precip
In/h
Pressure
bars
27
28
32
33
36
28
30
33
34
38
28
30
34
34
40
28
30
34
34
40
28
30
34
34
40
1.6
1.9
2.8
3.8
5.4
1.9
2.2
3.3
4.4
6.5
2.2
2.6
3.8
5.1
7.3
2.4
2.9
4.1
5.7
8.1
2.5
3.0
4.3
6.1
8.5
0.42
0.47
0.53
0.67
0.80
0.47
0.47
0.58
0.73
0.87
0.54
0.56
0.63
0.85
0.88
0.59
0.62
0.68
0.95
0.98
0.61
0.64
0.72
1.02
1.02
0.49
0.54
0.61
0.78
0.93
0.54
0.54
0.67
0.85
1.00
0.62
0.64
0.73
0.98
1.01
0.68
0.72
0.79
1.10
1.13
0.71
0.74
0.83
1.17
1.18
1,7
2,0
2,5
3,0
3,5
4,0
4,1
Nozzle
• 1,52,0
• 3,0
• 4,0
• 6,0
• 1,5
• 2,0
• 3,0
• 4,0
• 6,0
• 1,5
• 2,0
• 3,0
• 4,0
• 6,0
• 1,5
• 2,0
• 3,0
• 4,0
• 6,0
• 1,5
• 2,0
• 3,0
• 4,0
• 6,0
••1,5
• 2,0
• 3,0
• 4,0
• 6,0
• 1,5
• 2,0
• 3,0
• 4,0
• 6,0
•
▲
Radius Flow
m
m3⁄h
Flow
l/s
Precip Precip
mm/h mm/h
8,2
8,5
9,8
10,1
11,0
8,4
8,8
9,9
10,2
11,3
8,4
8,9
10,1
10,3
11,6
8,5
9,1
10,2
10,3
11,9
8,5
9,2
10,4
10,4
12,2
8,5
9,2
10,4
10,4
12,2
8,5
9,2
10,4
10,4
12,2
0,10
0,12
0,18
0,24
0,34
0,11
0,13
0,19
0,25
0,37
0,12
0,14
0,21
0,28
0,41
0,13
0,16
0,23
0,31
0,45
0,15
0,18
0,25
0,34
0,49
0,16
0,19
0,27
0,37
0,53
0,16
0,19
0,27
0,38
0,54
11
12
13
17
20
11
12
14
18
21
12
13
15
19
22
13
14
16
21
23
15
15
17
23
24
15
16
18
25
25
16
16
18
26
26
0,36
0,43
0,64
0,86
1,23
0,39
0,46
0,68
0,92
1,33
0,44
0,52
0,76
1,02
1,47
0,48
0,57
0,83
1,13
1,62
0,53
0,63
0,90
1,24
1,76
0,56
0,67
0,96
1,35
1,89
0,57
0,68
0,98
1,38
1,93
12
14
15
19
23
13
14
16
20
24
14
15
17
22
25
15
16
18
25
26
17
17
19
27
27
18
18
21
29
29
18
19
21
29
30
74
Rotors
www.rainbird.com
2005 – 2006 Catalog
Rotors
R-50 / R-50 SAM Performance with Radius+ Nozzles
METRIC
Pressure
psi
25
35
45
55
60
Nozzle
• 2.01.5
• 3.0
• 4.0
• 6.0
• 1.5
• 2.0
• 3.0
• 4.0
• 6.0
• 1.5
• 2.0
• 3.0
• 4.0
• 6.0
• 1.5
• 2.0
• 3.0
• 4.0
• 6.0
• 1.5
• 2.0
• 3.0
• 4.0
• 6.0
•
■
▲
■
Radius
ft.
Flow
GPM
Precip
In/h
Precip
In/h
Pressure
bars
33
37
38
34
38
39
39
45
34
39
40
40
48
34
39
40
41
49
34
39
40
41
50
1.5
2.2
3.1
1.7
2.5
3.5
4.8
7.0
2.0
2.8
4.2
5.4
8.1
2.1
3.1
4.5
6.0
8.9
2.3
3.3
4.9
6.2
9.4
0.27
0.31
0.41
0.28
0.33
0.44
0.61
0.67
0.33
0.35
0.51
0.65
0.68
0.35
0.39
0.54
0.69
0.71
0.38
0.42
0.59
0.71
0.72
0.31
0.36
0.48
0.33
0.39
0.51
0.70
0.77
0.38
0.41
0.58
0.75
0.78
0.40
0.45
0.63
0.79
0.82
0.44
0.48
0.68
0.82
0.84
1,7
2,0
2,5
3,0
3,5
4,0
4,1
Nozzle
• 1,52,0
• 3,0
• 4,0
• 6,0
• 1,5
• 2,0
• 3,0
• 4,0
• 6,0
• 1,5
• 2,0
• 3,0
• 4,0
• 6,0
• 1,5
• 2,0
• 3,0
• 4,0
• 6,0
• 1,5
• 2,0
• 3,0
• 4,0
• 6,0
• 1,5
• 2,0
• 3,0
• 4,0
• 6,0
• 1,5
• 2,0
• 3,0
• 4,0
• 6,0
•
▲
Radius Flow
m
m3⁄h
Flow
l/s
Precip Precip
mm/h mm/h
10,0
11,3
11,6
10,2
11,4
11,7
10,3
11,6
11,9
11,9
13,9
10,3
11,7
12,0
12,2
14,3
10,4
11,9
12,2
12,4
14,8
10,4
11,9
12,2
12,5
15,1
10,4
11,9
12,2
12,5
15,3
0,09
0,14
0,20
0,10
0,15
0,21
0,11
0,16
0,23
0,31
0,45
0,12
0,17
0,25
0,33
0,49
0,13
0,19
0,28
0,36
0,54
0,14
0,20
0,30
0,39
0,58
0,14
0,21
0,31
0,39
0,59
7
8
10
7
8
11
8
9
12
16
17
8
9
13
16
17
9
10
13
17
18
9
10
15
18
18
10
11
15
18
18
0,34
0,50
0,70
0,36
0,53
0,75
0,40
0,58
0,83
1,11
1,63
0,43
0,63
0,91
1,21
1,78
0,47
0,68
0,99
1,31
1,95
0,50
0,73
1,08
1,39
2,09
0,52
0,75
1,11
1,41
2,13
8
9
12
8
9
13
9
10
14
18
19
9
11
15
19
20
10
11
15
20
21
11
12
17
21
21
11
12
17
21
21
2005 – 2006 Catalog
www.rainbird.com
Rotors
75
Rotors
R-50 LA / R-50 SAM LA Performance with Rain Curtain ™ Nozzles
METRIC
Pressure
psi
25
35
45
55
60
Nozzle
• 2.01.5
• 3.0
• 4.0
• 6.0
• 1.5
• 2.0
• 3.0
• 4.0
• 6.0
• 1.5
• 2.0
• 3.0
• 4.0
• 6.0
• 1.5
• 2.0
• 3.0
• 4.0
• 6.0
• 1.5
• 2.0
• 3.0
• 4.0
• 6.0
•
■
▲
■
Radius
ft.
Flow
GPM
Precip
In/h
Precip
In/h
Pressure
bars
21
26
28
28
30
23
27
29
29
32
23
28
29
30
33
22
26
29
30
35
22
27
29
30
34
1.5
1.9
2.7
3.8
5.1
1.8
2.2
3.1
4.4
6.0
2.0
2.5
3.6
5.1
6.9
2.2
2.8
3.9
5.6
7.6
2.3
2.9
4.1
5.9
7.9
0.66
0.54
0.66
0.93
1.09
0.66
0.58
0.71
1.01
1.13
0.73
0.61
0.82
1.09
1.22
0.88
0.80
0.89
1.20
1.19
0.92
0.77
0.94
1.26
1.32
0.76
0.63
0.77
1.08
1.26
0.76
0.67
0.82
1.16
1.30
0.84
0.71
0.95
1.26
1.41
1.01
0.92
1.03
1.38
1.38
1.06
0.88
1.08
1.46
1.52
1,7
2,0
2,5
3,0
3,5
4,0
4,1
Nozzle
• 1,52,0
• 3,0
• 4,0
• 6,0
• 1,5
• 2,0
• 3,0
• 4,0
• 6,0
• 1,5
• 2,0
• 3,0
• 4,0
• 6,0
• 1,5
• 2,0
• 3,0
• 4,0
• 6,0
• 1,5
• 2,0
• 3,0
• 4,0
• 6,0
• 1,5
• 2,0
• 3,0
• 4,0
• 6,0
• 1,5
• 2,0
• 3,0
• 4,0
• 6,0
•
▲
Radius Flow
m
m3⁄h
Flow
l/s
Precip Precip
mm/h mm/h
6,4
7,9
8,5
8,5
9,2
6,7
8,1
8,7
8,7
9,4
6,8
8,1
8,7
8,8
9,7
6,8
8,2
8,8
9,0
10,1
6,8
8,2
8,8
9,2
10,4
6,7
8,1
8,8
9,2
10,4
6,7
8,2
8,8
9,2
10,4
0,09
0,12
0,17
0,24
0,32
0,10
0,13
0,18
0,26
0,34
0,11
0,14
0,20
0,28
0,38
0,12
0,15
0,22
0,31
0,42
0,13
0,17
0,24
0,34
0,46
0,14
0,18
0,25
0,36
0,49
0,14
0,18
0,26
0,37
0,50
17
14
17
24
27
16
14
17
24
28
18
16
19
26
29
19
17
20
28
30
21
18
22
29
30
23
20
24
31
33
23
20
24
32
33
0,34
0,43
0,61
0,86
1,16
0,37
0,46
0,65
0,92
1,24
0,41
0,51
0,72
1,02
1,38
0,44
0,56
0,79
1,12
1,52
0,48
0,61
0,86
1,22
1,65
0,52
0,65
0,92
1,31
1,77
0,52
0,66
0,93
1,34
1,79
19
16
19
27
32
19
16
20
28
32
20
18
22
30
34
22
19
24
32
34
24
21
25
34
35
27
23
27
36
38
27
23
28
37
38
76
Rotors
www.rainbird.com
2005 – 2006 Catalog
Rotors
R-50 LA / R-50 SAM LA Performance with Radius+ Nozzles
METRIC
Pressure
psi
25
35
45
55
60
Nozzle
• 2.01.5
• 3.0
• 4.0
• 6.0
• 1.5
• 2.0
• 3.0
• 4.0
• 6.0
• 1.5
• 2.0
• 3.0
• 4.0
• 6.0
• 1.5
• 2.0
• 3.0
• 4.0
• 6.0
• 1.5
• 2.0
• 3.0
• 4.0
• 6.0
•
■
▲
■
Radius
ft.
Flow
GPM
Precip
In/h
Precip
In/h
Pressure
bars
26
28
28
30
34
26
29
30
32
34
26
30
30
30
36
26
30
30
32
36
26
30
30
32
36
1.6
1.9
2.8
3.8
5.4
1.9
2.2
3.3
4.4
6.5
2.2
2.6
3.8
5.1
7.3
2.4
2.9
4.1
5.7
8.1
2.5
3.0
4.3
6.1
8.5
0.46
0.47
0.69
0.81
0.90
0.54
0.50
0.71
0.83
1.08
0.63
0.56
0.81
1.09
1.08
0.68
0.62
0.88
1.07
1.20
0.71
0.64
0.92
1.15
1.26
0.53
0.54
0.79
0.94
1.04
0.63
0.58
0.82
0.96
1.25
0.72
0.64
0.94
1.26
1.25
0.79
0.72
1.01
1.24
1.39
0.82
0.74
1.06
1.32
1.46
1,7
2,0
2,5
3,0
3,5
4,0
4,1
Nozzle
• 1,52,0
• 3,0
• 4,0
• 6,0
• 1,5
• 2,0
• 3,0
• 4,0
• 6,0
• 1,5
• 2,0
• 3,0
• 4,0
• 6,0
• 1,5
• 2,0
• 3,0
• 4,0
• 6,0
• 1,5
• 2,0
• 3,0
• 4,0
• 6,0
• 1,5
• 2,0
• 3,0
• 4,0
• 6,0
• 1,5
• 2,0
• 3,0
• 4,0
• 6,0
•
▲
Radius Flow
m
m3⁄h
Flow
l/s
Precip Precip
mm/h mm/h
7,9
8,5
8,5
9,2
10,4
7,9
8,7
8,8
9,3
10,4
7,9
8,8
8,9
9,4
10,6
7,9
9,0
9,1
9,5
10,8
7,9
9,2
9,2
9,5
11,0
7,9
9,2
9,2
9,8
11,0
7,9
9,2
9,2
9,8
11,0
0,10
0,12
0,18
0,24
0,34
0,11
0,13
0,19
0,25
0,37
0,12
0,14
0,21
0,28
0,41
0,13
0,16
0,23
0,31
0,45
0,15
0,18
0,25
0,34
0,49
0,16
0,19
0,27
0,37
0,53
0,16
0,19
0,27
0,38
0,54
12
12
18
20
23
12
12
18
21
25
14
13
19
23
26
15
14
20
25
28
17
15
21
27
29
18
16
23
28
31
18
16
23
29
32
0,36
0,43
0,64
0,86
1,23
0,39
0,46
0,68
0,92
1,33
0,44
0,52
0,76
1,02
1,47
0,48
0,57
0,83
1,13
1,62
0,53
0,63
0,90
1,24
1,76
0,56
0,67
0,96
1,35
1,89
0,57
0,68
0,98
1,38
1,93
13
14
20
23
26
14
14
20
25
28
16
16
22
27
30
18
16
23
29
32
20
17
25
32
34
21
18
26
33
36
21
19
27
33
37
2005 – 2006 Catalog
www.rainbird.com
Rotors
77
Rotors
5500 Series Rotors
NEW
Bigger, Better, Built to Last
Primary Application
Athletic fields, schools, parks and commercial sites – Turf areas
with spacing up to 55 feet (15,2 m).
The Rain Bird® 5500 Series Rotors are built to withstand the harsh
conditions and vandalism present in commercial rotor applications.
They have been designed and tested to ensure the high reliability
demanded by the market today. The 5500 Series offers the
durability and performance of Rain Bird’s best commercial rotors in
a package designed to excel in short to mid-range applications.
5505
5512
5505 - SS - NP - 12
Model
5500 Series:
5" pop-up
78
Nozzle Size
12
Optional
Feature
Non-potable
rubber cover
How to Specify
Optional
Feature
Stainless
steel riser
(5" only)
Rotors
Features
• Five year trade warranty.
• Memory Arc® returns the rotor to its original arc setting.
• Non-strippable drive mechanism prevents damage from vandals.
• Brass reinforced nozzle turret to riser connection withstands
attempted vandalism.
• Optional stainless steel riser model helps deter vandalism on public
turf areas.
• Continuous full and part circle operation in one unit to reduce
inventory requirements.
• Easy, wet, dry arc adjustment with slotted screwdriver through top of
rotor from 50° to 330° part-circle, 360° non-reversing full-circle.
• Left and right side trips adjustable for ease of installation without
turning the case and loosening the pipe connection.
• Seal-A-Matic™ (SAM) check device/riser to help prevent low head
drainage.
• Water-lubricated gear drive.
• Eight Rain Curtain™ nozzles for optimal distribution and close-in
watering resulting in superior uniformity.
• Nozzles are interchangeable from the front with no special tools.
• Self-adjusting stator allows nozzle replacement with no other
adjustments required.
• Heavy duty retract spring ensures positive pop-down.
• Standard black rubber cover
• Optional Purple rubber cover for non-potable applications
• Small 1 3⁄4" (4,4 cm) exposed diameter reduces possibility of injury on
play areas
www.rainbird.com
2005 – 2006 Catalog
Rotors
Operating Range
• Precipitation Rate: 0.23 to 1.4 in/hr (5,9 to 35,5 mm/h)
• Radius: 33 to 55 feet (10,0 to 15,2m)
• Flow: 1.4 to 15.5 GPM (0,33 to 3,52 m3/h; 0,09 to 0,98 l/s)
Specifications
• 3⁄4" (20/27) NPT or BSP female threaded inlet
• SAM check device holds up to 10 feet (3,1 m) of head
• Rain Curtain nozzles: 2.0 - Orange, 3.0 - Red, 4.0 - Black, 5.0 Yellow, 6.0 - Light Blue, 8.0 - Dark Green, 10.0 - Grey, 12.0 - Beige
• Nozzle outlet trajectory is 25°
Dimensions
• Exposed diameter: 1 3⁄4" (4,4 cm)
• Overall diameter: 2 3⁄4" (7,0 cm)
• Overall height: 9 1⁄4" (23,5 cm)
• Pop-up height: 5" (12,7 cm)
Note: Pop-up height is measured from cover to the primary nozzle port.
Overall body height is measured popped down.
Models
• 5505: 3⁄4" NPT female threaded inlet (5" plastic riser stem)
• 5505-SS: 3⁄4" NPT female threaded inlet (5" stainless steel
covered riser stem)
• 5512: 3⁄4" NPT female threaded inlet (12" plastic riser stem)*
*Available soon.
5500 Series Nozzles
2005 – 2006 Catalog
www.rainbird.com
Rotors
79
Rotors
Pressure
psi
30
40
50
60
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Nozzle
2
3
4
5
6
8
2
3
4
5
6
8
10
12
2
3
4
5
6
8
10
12
2
3
4
5
6
8
10
12
■
▲
Radius
ft.
Flow
GPM
Precip
In/h
Precip
In/h
Pressure
psi
33
35
37
37
37
33
37
39
41
41
43
39
41
39
37
41
43
45
45
43
47
45
37
41
45
47
47
45
51
51
1.4
2.3
2.6
3.2
3.8
5.4
1.6
2.7
3.1
3.8
4.5
6.4
7.5
9.6
1.8
3
3.5
4.3
5.1
7.3
7.9
11.1
2
3.4
3.8
4.7
5.6
8.1
9.7
12.3
0.25
0.36
0.37
0.45
0.54
0.95
0.23
0.34
0.35
0.43
0.47
0.81
0.86
1.21
0.26
0.35
0.36
0.41
0.48
0.76
0.69
1.05
0.28
0.38
0.36
0.41
0.49
0.77
0.72
0.91
0.29
0.42
0.42
0.52
0.62
1.1
0.27
0.39
0.41
0.5
0.54
0.94
0.99
1.4
0.3
0.4
0.42
0.47
0.56
0.88
0.8
1.22
0.32
0.44
0.42
0.48
0.56
0.89
0.83
1.05
70
80
90
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Nozzle
2
3
4
5
6
8
10
12
2
3
4
5
6
8
10
12
10
12
■
▲
Radius
ft.
Flow
GPM
Precip
In/h
Precip
In/h
39
43
45
47
47
47
53
53
39
43
45
47
49
49
55
55
55
55
2.2
3.6
4.1
5.1
6.1
8.8
11.2
13.5
2.3
3.9
4.4
5.5
6.5
9.5
12.1
14.4
13.1
15.5
0.27
0.38
0.39
0.45
0.53
0.77
0.77
0.92
0.29
0.41
0.42
0.48
0.52
0.76
0.77
0.92
0.83
0.99
0.31
0.44
0.45
0.52
0.61
0.89
0.89
1.07
0.33
0.47
0.48
0.55
0.6
0.88
0.89
1.06
0.96
1.14
■
Square spacing based on 50% diameter of throw.
▲
Triangular spacing based on 50% diameter of throw.
80
Rotors
www.rainbird.com
2005 – 2006 Catalog
Rotors
METRIC
■
Pressure
bars
2,1
2,5
3,0
3,5
4,0
Nozzle
• 23
•4
•5
•6
•8
•2
•3
•4
•5
•6
•8
•2
•3
•4
•5
•6
•8
• 10
• 12
•2
•3
•4
•5
•6
•8
• 10
• 12
•2
•3
•4
•5
•6
•8
• 10
• 12
•
▲
■
Radius Flow
m
m3⁄h
Flow
l/s
Precip Precip
mm/h mm/h
Pressure
bars
10,1
10,7
11,3
11,3
11,3
10,1
10,8
11,4
12,0
12,0
12,4
11,2
11,3
12,1
12,7
12,9
13,3
12,3
13,1
12,5
11,3
12,5
13,2
13,8
13,8
13,2
14,4
13,9
11,3
12,5
13,6
14,2
14,2
13,6
15,3
15,2
0,09
0,15
0,16
0,20
0,24
0,34
0,10
0,16
0,18
0,23
0,27
0,38
0,11
0,18
0,20
0,25
0,30
0,42
0,48
0,64
0,11
0,19
0,22
0,27
0,32
0,46
0,51
0,71
0,12
0,21
0,24
0,29
0,35
0,50
0,59
0,76
6,3
9,2
9,3
11,4
13,6
24,2
5,9
8,9
9,1
11,2
12,5
21,8
6,0
8,7
9,1
10,8
12,1
20,1
20,1
29,3
6,5
8,8
9,2
10,4
12,3
19,3
17,6
26,5
7,0
9,7
9,2
10,4
12,4
19,5
18,1
23,8
4,5
0,32
0,52
0,59
0,73
0,86
1,23
0,35
0,58
0,66
0,81
0,96
1,37
0,38
0,64
0,74
0,90
1,07
1,53
1,74
2,30
0,41
0,69
0,80
0,98
1,17
1,67
1,83
2,54
0,45
0,75
0,85
1,05
1,25
1,80
2,12
2,74
7,3
10,6
10,7
13,2
15,7
28,0
6,8
10,2
10,5
12,9
14,4
25,2
6,9
10,0
10,5
12,5
13,9
23,2
23,2
33,8
7,5
10,2
10,7
12,0
14,2
22,3
20,3
30,6
8,1
11,2
10,6
12,0
14,3
22,5
20,9
27,4
5,0
5,5
6,0
6,2
Nozzle
• 23
•4
•5
•6
•8
• 10
• 12
•2
•3
•4
•5
•6
•8
• 10
• 12
•2
•3
•4
•5
•6
•8
• 10
• 12
• 10
• 12
• 10
• 12
•
▲
Radius Flow
m
m3⁄h
Flow
l/s
Precip Precip
mm/h mm/h
11,6
12,8
13,7
14,3
14,3
14,0
15,9
15,9
11,9
13,1
13,7
14,3
14,5
14,5
16,3
16,3
11,9
13,1
13,7
14,3
14,9
14,9
16,8
16,8
16,8
16,8
16,8
16,8
0,13
0,22
0,25
0,31
0,37
0,53
0,66
0,82
0,14
0,23
0,26
0,33
0,39
0,57
0,72
0,87
0,14
0,25
0,28
0,35
0,41
0,60
0,76
0,91
0,81
0,96
0,83
0,91
7,1
9,7
9,6
10,9
13,0
19,5
18,9
23,3
7,2
9,7
10,1
11,5
13,4
19,4
19,5
23,4
7,4
10,3
10,6
12,2
13,2
19,3
19,6
23,3
20,7
24,5
21,2
25,1
0,48
0,80
0,90
1,12
1,33
1,92
2,38
2,94
0,51
0,83
0,95
1,18
1,41
2,04
2,60
3,12
0,52
0,88
1,00
1,25
1,47
2,15
2,74
3,27
2,91
3,45
2,98
3,52
8,2
11,2
11,0
12,6
15,0
22,5
21,9
26,9
8,3
11,2
11,6
13,3
15,5
22,5
22,5
27,1
8,5
11,9
12,2
14,0
15,3
22,3
22,6
26,9
23,9
28,3
24,4
28,9
■
▲
2005 – 2006 Catalog
www.rainbird.com
Rotors
81
Rotors
Falcon 6504
®
Uncompromising Performance
Primary Application
Parks, athletic fields, cemeteries, schools and commercial sites –
Large turf areas with spacing up to 65 feet (19,8 m).
With the Falcon 6504 rotor you can have it all — superior
distribution, reliability and durability! Rain Curtain™ nozzles
maximize performance and coverage. A multi-function wiper seal
and tapered riser keep the stem clear of debris, providing long-term
protection. Plus, heavy-duty construction makes the Falcon 6504
one of the toughest rotors in the field. Available in full- and partcircle models with optional stainless steel riser, the Falcon 6504
rotor is ideal for large turf sites such as parks, athletic fields,
cemeteries, schools and commercial applications.
Falcon
6504
Falcon
6504
Stainless
Steel
Optional
Feature
Stainless
steel riser
Rotation
Part-circle
Model
F4: Falcon
Optional Optional
Features Feature
NonPrepotable
installed
cover
Nozzle
or,
High- Nozzle Size
speed 16
rotor
Note: For non-U.S. applications, it is
necessary to specify NPT or BSP
thread type.
82
How to Specify
NP
or
F4- PC- SS- HS- 16- P
Rotors
Features
• Stainless steel riser option helps deter vandalism on public turf areas.
• Easy arc adjustment (part-circle model) through top of rotor from
40° to 360°.
• Water-lubricated gear drive for reliable, durable rotation.
• Heavy-duty, stainless steel retract spring ensures positive pop-down.
• Standard black rubber cover or optional purple rubber cover
for non-potable water.
• Removable Seal-A-Matic™ (SAM) check device prevents puddling
and erosion caused by low-head drainage.
• Eight color-coded Rain Curtain™ nozzles offer greater design
flexibility.
• Rain Curtain™ nozzles have three ports for optimal long-range,
mid-range, and close-in watering, for green grass even in the heat
of summer.
• Self-adjusting stator does not require replacement when changing
nozzles.
• Ratcheting slip clutch mechanism provides vandal resistance.
• Radius adjustment screw allows radius reduction up to 25%
without changing nozzles.
• Small 2" (5,1 cm) exposed diameter reduces possibility of injury
in play areas.
www.rainbird.com
2005 – 2006 Catalog
Rotors
• Patented, pressure-activated wiper seal and tapered riser stem
on both plastic and stainless steel models protect internals from
debris to ensure positive pop-up and retraction.
• 4" (10,2 cm) pop-up height to center line of nozzle clears taller
turfgrass.
• Stainless steel trip gears ensure long-term durability.
• Optional rubber collar for added safety on playing fields New
• High-speed model completes full rotation in approximately one
minute for quick wet-down of clay tennis courts and sports turf
infield areas.
• Falcon rotors can be ordered from the factory with nozzles
pre-installed in case quantities as a special order. w
Models
• F4-FC: Full-circle
• F4-PC: Part-circle
• F4-FC-NP: Full-circle, non-potable cover
• F4-PC-NP: Part-circle, non-potable cover
• F4-FC-SS: Full-circle, stainless steel
• F4-PC-SS: Part-circle, stainless steel
• F4-FC-SS-HS: Full-circle, stainless steel, high speed rotation
• F4-PC-SS-HS: Part-circle, stainless steel, high speed rotation
• F4-FC-SS-NP: Full-circle, stainless steel, non-potable cover
• F4-PC-SS-NP: Part-circle, stainless steel, non-potable cover
Note: All models available with BSP threads.
Operating Range
• Precipitation Rate: 0.37 to 1.14 inches per hour (9 to 29 mm/h)
Specifications
• 1" (26/34) female NPT or BSP threaded inlet
• SAM check device holds up to 10 feet (3,1 m) of elevation change
• Rain Curtain nozzles: 04-black; 06-light blue; 08-dark green;
10-grey; 12-beige; 14-light green; 16-dark brown; 18-dark blue
• Nozzle outlet trajectory is 25°
Dimensions
• Overall height: 81⁄ 2" (21,6 cm)
• Exposed surface diameter: 2" (5,1 cm)
Note: Pop-up height is measured from cover to center of nozzle. Overall body
height is measured popped down.
2005 – 2006 Catalog
www.rainbird.com
Rotors
83
Rotors
Falcon 6504 Nozzle Performance
Pressure
psi
30
40
50
60
Nozzle
• 64
•4
•6
•8
• 10
• 12
• 14
• 16
• 18
•4
•6
•8
• 10
• 12
• 14
• 16
• 18
•4
•6
•8
• 10
• 12
• 14
• 16
• 18
•
■
▲
Radius
ft.
Flow
GPM
Precip
In/h
Precip
In/h
Pressure
psi
39
43
41
45
49
51
53
55
55
59
41
49
51
53
55
59
61
59
41
47
51
55
57
61
63
63
2.9
4.2
3.3
4.9
6.6
8.1
9.7
11.3
12.6
13.7
3.7
5.5
7.4
9.1
11.0
12.7
14.3
15.4
4.0
6.0
8.2
10.0
12.2
14.0
15.7
17.1
0.37
0.44
0.38
0.47
0.53
0.60
0.66
0.72
0.80
0.76
0.42
0.44
0.55
0.62
0.70
0.70
0.74
0.85
0.46
0.52
0.61
0.64
0.72
0.72
0.76
0.83
0.42
0.50
0.44
0.54
0.61
0.69
0.77
0.83
0.93
0.87
0.49
0.51
0.63
0.72
0.81
0.81
0.85
0.98
0.53
0.60
0.70
0.73
0.83
0.84
0.88
0.96
70
80
90
Nozzle
• 64
•8
• 10
• 12
• 14
• 16
• 18
•4
•6
•8
• 10
• 12
• 14
• 16
• 18
• 18
•
■
▲
Radius
ft.
Flow
GPM
Precip
In/h
Precip
In/h
41
49
51
57
59
61
63
65
43
49
53
55
61
61
63
65
65
4.4
6.3
8.9
10.8
13.2
15.2
16.9
18.3
4.6
6.9
9.4
11.6
14.0
16.2
18.1
19.6
21.7
0.50
0.51
0.66
0.64
0.73
0.79
0.82
0.83
0.48
0.55
0.64
0.74
0.72
0.84
0.88
0.89
0.99
0.58
0.58
0.76
0.74
0.84
0.91
0.95
0.96
0.55
0.64
0.74
0.85
0.84
0.97
1.01
1.03
1.14
■
▲
Falcon® 6504 Rain Curtain™ Nozzles
84
Rotors
www.rainbird.com
2005 – 2006 Catalog
Rotors
Falcon 6504 Nozzle Performance
METRIC
■
Pressure
bars
2,1
2,5
3,0
3,5
4,0
Nozzle
• 46
•4
•6
•8
• 10
• 12
• 14
• 16
• 18
•4
•6
•8
• 10
• 12
• 14
• 16
• 18
•4
•6
•8
• 10
• 12
• 14
• 16
• 18
•4
•6
•8
• 10
• 12
• 14
• 16
• 18
•
▲
■
Radius Flow
m
m3⁄h
Flow
l/s
Precip Precip
mm/h mm/h
Pressure
bars
11,9
13,1
12,3
13,5
14,9
15,5
16,2
16,8
16,8
18,0
12,5
14,1
15,1
15,8
16,4
17,2
17,4
18,0
12,5
14,9
15,5
16,2
16,8
18,0
18,6
18,1
12,5
14,4
15,5
16,6
17,3
18,5
19,1
19,0
0,18
0,26
0,20
0,29
0,42
0,51
0,61
0,71
0,79
0,86
0,22
0,32
0,43
0,53
0,64
0,74
0,83
0,90
0,23
0,35
0,47
0,58
0,70
0,81
0,91
0,98
0,25
0,37
0,51
0,62
0,75
0,87
0,97
1,06
9
11
10
12
13
15
17
18
20
19
10
12
14
15
17
18
20
20
11
11
14
16
18
18
19
22
11
13
15
16
18
18
19
21
4,5
0,66
0,95
0,72
1,05
1,50
1,84
2,20
2,57
2,86
3,11
0,78
1,16
1,56
1,92
2,31
2,68
3,00
3,25
0,85
1,26
1,69
2,08
2,52
2,91
3,27
3,53
0,89
1,34
1,83
2,23
2,72
3,12
3,50
3,81
11
13
11
13
16
18
19
21
24
22
12
13
16
18
20
21
23
23
13
13
16
18
21
21
22
25
13
15
17
19
21
21
22
24
5,0
5,5
6,0
6,2
Nozzle
• 46
•8
• 10
• 12
• 14
• 16
• 18
•4
•6
•8
• 10
• 12
• 14
• 16
• 18
•4
•6
•8
• 10
• 12
• 14
• 16
• 18
• 18
• 18
•
▲
Radius Flow
m
m3⁄h
Flow
l/s
Precip Precip
mm/h mm/h
12,5
14,6
15,5
17,1
17,7
18,6
19,2
19,5
12,7
14,9
15,7
17,2
18,1
18,6
19,2
19,8
13,1
14,9
16,1
16,8
18,6
18,6
19,2
19,8
19,8
19,8
0,27
0,39
0,54
0,66
0,80
0,92
1,03
1,12
0,28
0,41
0,57
0,69
0,85
0,97
1,09
1,18
0,29
0,43
0,59
0,73
0,88
1,02
1,14
1,23
1,33
1,37
12
13
16
16
18
19
20
21
13
13
17
17
19
20
21
22
12
14
16
19
18
21
22
23
24
25
0,96
1,40
1,95
2,37
2,89
3,32
3,71
4,03
1,01
1,47
2,05
2,50
3,04
3,51
3,91
4,23
1,04
1,56
2,13
2,63
3,18
3,67
4,10
4,44
4,79
4,93
14
15
19
19
21
22
23
24
15
15
19
19
21
23
24
25
14
16
19
22
21
25
26
26
28
29
■
▲
2005 – 2006 Catalog
www.rainbird.com
Rotors
85
Rotors
High Speed Falcon 6504 Nozzle Performance
Pressure
psi
30
40
50
60
Nozzle
• 64
•4
•6
•8
• 10
• 12
• 14
• 16
• 18
•4
•6
•8
• 10
• 12
• 14
• 16
• 18
•4
•6
•8
• 10
• 12
• 14
• 16
• 18
•
■
▲
Radius
ft.
Flow
GPM
Precip
In/h
Precip
In/h
Pressure
psi
37
39
41
43
47
47
49
53
51
53
41
45
49
49
53
53
53
55
41
45
47
49
53
53
55
59
3.0
4.3
3.5
6.0
6.6
8.1
9.9
11.4
12.6
13.9
3.7
5.6
7.5
9.2
11.2
12.9
14.3
15.6
4.2
6.2
8.3
10.2
12.4
14.2
15.7
17.2
0.42
0.54
0.40
0.62
0.58
0.71
0.79
0.78
0.93
0.95
0.42
0.53
0.60
0.74
0.77
0.88
0.98
0.99
0.48
0.59
0.72
0.82
0.85
0.97
1.00
0.95
0.49
0.63
0.46
0.72
0.66
0.82
0.92
0.90
1.08
1.10
0.49
0.62
0.69
0.85
0.89
1.02
1.13
1.15
0.56
0.68
0.84
0.94
0.98
1.12
1.15
1.10
70
80
90
Nozzle
• 64
•8
• 10
• 12
• 14
• 16
• 18
•4
•6
•8
• 10
• 12
• 14
• 16
• 18
• 18
•
■
▲
Radius
ft.
Flow
GPM
Precip
In/h
Precip
In/h
41
43
49
51
55
53
57
59
39
43
51
49
55
53
59
59
61
4.6
6.7
9.0
11.1
13.5
15.3
17.1
18.6
4.9
7.1
9.7
11.9
14.4
16.5
18.4
20.0
21.3
0.53
0.70
0.72
0.82
0.86
1.05
1.01
1.03
0.62
0.74
0.72
0.95
0.92
1.13
1.02
1.11
1.10
0.61
0.81
0.83
0.95
0.99
1.21
1.17
1.19
0.72
0.85
0.83
1.10
1.06
1.31
1.18
1.28
1.27
■
▲
86
Rotors
www.rainbird.com
2005 – 2006 Catalog
Rotors
High Speed Falcon 6504 Nozzle Performance
■
Pressure
bars
2,1
2,5
3,0
3,5
4,0
Nozzle
• 64
•4
•6
•8
• 10
• 12
• 14
• 16
• 18
•4
•6
•8
• 10
• 12
• 14
• 16
• 18
•4
•6
•8
• 10
• 12
• 14
• 16
• 18
•4
•6
•8
• 10
• 12
• 14
• 16
• 18
•
METRIC
▲
■
Radius Flow
m
m3⁄h
Flow
l/s
Precip Precip
mm/h mm/h
Pressure
bars
11,3
11,9
12,0
12,7
14,2
14,2
14,8
16,0
15,4
16,0
12,5
13,3
14,5
14,5
15,4
16,2
15,8
16,4
12,5
13,7
14,9
14,9
16,2
16,2
16,2
16,9
12,5
13,7
14,4
14,9
16,2
16,2
16,6
17,7
0,19
0,27
0,21
0,34
0,42
0,51
0,62
0,72
0,79
0,88
0,23
0,37
0,44
0,54
0,65
0,75
0,83
0,91
0,24
0,36
0,48
0,59
0,71
0,82
0,91
0,99
0,26
0,38
0,51
0,63
0,77
0,88
0,97
1,07
11
14
10
15
15
18
20
20
24
24
10
15
15
18
20
21
24
25
11
14
16
19
20
23
25
25
12
15
18
20
21
24
25
24
4,5
0,68
0,98
0,75
1,22
1,49
1,83
2,24
2,58
2,85
3,15
0,81
1,33
1,57
1,93
2,35
2,71
3,00
3,29
0,85
1,28
1,72
2,11
2,56
2,95
3,27
3,57
0,93
1,38
1,85
2,27
2,76
3,17
3,50
3,83
12
16
12
18
17
21
24
23
28
28
12
17
17
21
23
24
28
28
13
16
18
22
23
26
29
29
14
17
21
24
24
28
29
28
5,0
5,5
6,0
6,2
Nozzle
• 64
•8
• 10
• 12
• 14
• 16
• 18
•4
•6
•8
• 10
• 12
• 14
• 16
• 18
•4
•6
•8
• 10
• 12
• 14
• 16
• 18
• 18
• 18
•
▲
Radius Flow
m
m3⁄h
Flow
l/s
Precip Precip
mm/h mm/h
12,5
13,4
14,6
15,3
16,5
16,2
17,1
18,0
12,3
13,1
15,1
15,4
16,8
16,2
17,5
18,0
11,9
13,1
15,5
14,9
16,8
16,2
18,0
18,0
18,4
18,6
0,28
0,41
0,55
0,67
0,82
0,93
1,04
1,13
0,29
0,43
0,58
0,71
0,87
0,98
1,10
1,20
0,31
0,45
0,61
0,75
0,91
1,04
1,16
1,26
1,32
1,34
13
16
18
21
22
26
26
25
14
18
18
22
22
27
26
27
16
19
18
24
23
29
26
28
28
28
1,00
1,48
1,97
2,42
2,95
3,36
3,73
4,07
1,06
1,56
2,08
2,57
3,12
3,54
3,96
4,30
1,11
1,61
2,20
2,70
3,27
3,74
4,17
4,53
4,75
4,84
15
19
21
24
25
30
30
29
16
21
21
25
26
31
30
31
18
22
21
28
27
33
30
32
32
32
■
▲
2005 – 2006 Catalog
www.rainbird.com
Rotors
87
Rotors
7005
Primary Application
Athletic fields, schools, parks and commercial sites – Large turf
areas with spacing up to 70 feet (21,4 m).
The Rain Bird 7005 rotor is built rugged to withstand the harsh
It has been designed and tested to ensure the high reliability
demanded by the market today. With its extensive customer
identified features, it is versatile enough to fit all applications.
7005
7005-SS
7005- SS- NP- 18
Nozzle Size
14
Note: For non-U.S. applications, it is
necessary to specify NPT or BSP
thread type.
How to Specify
Optional Features
Non-potable cover
88
Rotors
Model
7005
Optional Feature
Stainless steel riser
Features
turf areas.
• Easy, wet, dry arc adjustment with slotted screwdriver through top
of rotor from 50° to 330° part-circle, 360° non-reversing full-circle.
• Continuous full- and part-circle operation in one unit to reduce
• Left and right side arc settings adjustable for ease of installation
without turning the case and loosening the pipe connection.
drainage.
• Standard rubber cap. (Black)
• Rain Curtain™ nozzles with three ports for optimal long-range,
mid-range, and close-in watering resulting in superior uniformity.
• Small (17⁄8") exposed diameter reduces possibility of injury in play
areas.
• Optional non-potable rubber cover (purple).
• Optional rubber collar (black or purple).
www.rainbird.com
2005 – 2006 Catalog
Rotors
Pressure
psi
• 0604
• 08
• 10
• 12
• 14
• 16
• 18
• 04
• 06
• 08
• 10
• 12
• 14
• 16
• 18
• 04
• 06
• 08
• 10
• 12
• 14
• 16
• 18
• 04
• 06
• 08
• 10
• 12
• 14
• 16
• 18
• 14
• 16
• 18
•
50
Operating Range
• Flow: 3.8 to 22.2 GPM (0,86 to 5,04 m3/h; 0,24 to 1,40 l/s)
60
Specifications
• 1" (26/34) NPT or BSP female threaded inlet
• SAM check device holds up to 10 feet of head
• Rain Curtain nozzles: 04 - black; 06 - light blue;
08 - dark green; 10 - gray; 12 - beige; 14 - light green;
16 - dark brown; 18 - dark blue
• Nozzle outlet trajectory is 25º
Dimensions
70
Note: Pop-up height is measured from cover to center of nozzle.
Models
• 7005: 1" NPT female threaded inlet (plastic riser stem).
• 7005-SS: 1" NPT female threaded inlet (stainless steel
covered riser stem).
• Optional non-potable rubber cover (purple)
• Optional rubber collar (black or purple)
Nozzle
80
*Note: All models available with BSP threads
90
■
▲
Radius
ft.
Flow
GPM
Precip
In/h
Precip
In/h
39
45
49
53
57
59
61
63
39
45
49
53
59
61
65
65
39
45
49
55
59
63
67
67
39
45
49
55
61
63
67
69
65
69
71
3.8
5.6
6.6
9.3
11.1
12.6
14.3
16.1
3.8
6.1
8.4
10.1
12.0
14.3
15.9
17.8
4.7
6.7
9.0
11.1
13.2
15.3
17.2
19.3
5.0
7.1
9.8
11.8
14.2
16.4
18.6
20.9
17.9
20.0
22.2
0.48
0.53
0.53
0.64
0.66
0.70
0.74
0.78
0.48
0.58
0.67
0.69
0.66
0.74
0.72
0.81
0.60
0.64
0.72
0.71
0.73
0.74
0.74
0.83
0.63
0.68
0.79
0.75
0.73
0.80
0.80
0.85
0.82
0.81
0.85
0.56
0.62
0.61
0.74
0.76
0.81
0.85
0.90
0.56
0.67
0.78
0.80
0.77
0.85
0.84
0.94
0.69
0.74
0.83
0.82
0.84
0.86
0.85
0.96
0.73
0.78
0.91
0.87
0.85
0.92
0.92
0.98
0.94
0.93
0.98
■
▲
2005 – 2006 Catalog
www.rainbird.com
Rotors
89
Rotors
METRIC
■
Pressure
bars
3,5
4,0
4,5
Nozzle
• 0406
• 08
• 10
• 12
• 14
• 16
• 18
• 04
• 06
• 08
• 10
• 12
• 14
• 16
• 18
• 04
• 06
• 08
• 10
• 12
• 14
• 16
• 18
•
▲
■
Radius Flow
m
m3⁄h
Flow
l/s
Precip Precip
mm/h mm/h
Pressure
bars
11,9
13,7
14,9
16,1
17,5
18,1
19,0
19,3
11,9
13,7
14,9
16,3
17,7
18,5
19,4
19,7
11,9
13,7
14,9
16,5
18,0
18,8
19,8
20,1
0,24
0,36
0,44
0,58
0,70
0,81
0,91
1,03
0,26
0,38
0,49
0,64
0,75
0,87
0,98
1,10
0,28
0,40
0,53
0,67
0,80
0,93
1,04
1,17
12
14
14
16
16
18
18
20
13
15
16
17
17
18
19
20
14
15
17
18
18
19
19
21
5,0
0,86
1,28
1,59
2,10
2,52
2,92
3,29
3,70
0,93
1,37
1,75
2,30
2,70
3,13
3,52
3,95
1,00
1,45
1,92
2,40
2,87
3,34
3,75
4,21
14
16
16
19
19
21
21
23
15
17
18
20
20
21
22
24
16
18
20
20
20
22
22
24
5,5
6,0
6,2
Nozzle
• 0406
• 08
• 10
• 12
• 14
• 16
• 18
• 04
• 06
• 08
• 10
• 12
• 14
• 16
• 18
• 14
• 16
• 18
• 14
• 16
• 18
•
▲
Radius Flow
m
m3⁄h
Flow
l/s
Precip Precip
mm/h mm/h
11,9
13,7
14,9
16,7
18,3
19,1
20,2
20,6
11,9
13,7
14,9
16,8
18,5
19,4
20,6
21,0
19,7
21,0
21,5
19,8
21,0
21,7
0,29
0,43
0,58
0,69
0,85
0,98
1,10
1,24
0,31
0,45
0,62
0,75
0,90
1,04
1,17
1,31
1,10
1,23
1,38
1,13
1,26
1,40
15
16
19
18
18
19
20
21
16
17
20
19
19
20
20
21
20
20
21
21
21
21
1,06
1,54
2,09
2,50
3,05
3,54
3,98
4,46
1,13
1,62
2,25
2,70
3,23
3,75
4,22
4,71
3,96
4,45
4,96
4,06
4,54
5,04
17
19
22
21
21
22
23
24
18
20
23
22
22
23
23
25
24
23
25
24
24
25
■
▲
7005 Rain Curtain™ Nozzles
90
Rotors
www.rainbird.com
2005 – 2006 Catalog
Rotors
8005
Primary Application
Athletic fields, schools, parks and commercial sites – Large turf
areas with spacing up to 80 feet (24,4 m).
The Rain Bird 8005 rotor is built rugged to withstand the harsh
It has been designed and tested to ensure the high reliability
demanded by the market today. Its extensive customer identified
features and 80 foot radius make it ideal for sportsfields, parks and
other large turf applications.
2005 – 2006 Catalog
www.rainbird.com
8005-SS
8005
8005- SS- NP- 26
Nozzle Size
26
How to Specify
Features
turf areas.
• Easy, wet, dry arc adjustment with slotted screwdriver through top
of rotor from 50° to 330° part-circle, 360° non-reversing full-circle.
• Continuous full- and part-circle operation in one unit to reduce
• Left and right side arc settings adjustable for ease of installation
without turning the case and loosening the pipe connection.
drainage.
• Standard rubber cap. (Black)
• Rain Curtain™ nozzles with three ports for optimal long-range,
mid-range, and close-in watering resulting in superior uniformity.
• Small (17⁄8") exposed diameter reduces possibility of injury in play
areas.
• Optional non-potable rubber cover (purple).
• Optional rubber collar (black or purple).
Optional Features
Non-potable
rubber collar
Model
8005
Optional Feature
Stainless steel riser
Note: For non-U.S. applications, it is necessary to
specify NPT or BSP thread type.
Rotors
91
Rotors
Pressure
psi
8005
Continued
50
Operating Range
60
Specifications
• 1" (26/34) NPT or BSP female threaded inlet
• SAM check device holds up to 10 feet (3,1 m) of head
• Rain Curtain nozzles:* 12 - beige; 14 - light green; 16 - dark brown;
18 - dark blue; 20 - red; 22 - yellow; 24 - orange; 26 - white
• Nozzle outlet trajectory is 25º
* Note: Nozzles 20, 22, 24, and 26 are keyed to fit only in the 8005 rotor.
70
Dimensions
Note: Pop-up height is measured from cover to center of primary nozzle port.
80
Models
• 8005: 1" NPT female threaded inlet (plastic riser stem).
• 8005-SS: 1" NPT female threaded inlet (stainless steel covered
riser stem).
• Optional non-potable rubber cover (purple)
• Optional rubber collar (black or purple)
*Note: All models available with BSP threads
90
100
■
▲
Nozzle
• 1412
• 16
• 18
• 20
• 22
• 24
• 26
• 1412
• 16
• 18
• 20
• 22
• 24
• 26
• 1412
• 16
• 18
• 20
• 22
• 24
• 26
• 1412
• 16
• 18
• 20
• 22
• 24
• 26
• 1412
• 16
• 18
• 20
• 22
• 24
• 26
• 2022
• 24
• 26
■
▲
Radius
ft.
Flow
GPM
Precip
In/h
Precip
In/h
57
59
61
63
65
65
63
65
59
61
65
65
67
71
69
73
59
63
67
67
71
73
75
75
61
63
67
69
71
75
77
79
61
65
69
71
73
75
79
79
75
77
79
81
11.1
12.6
14.3
16.1
18.6
20.7
22.3
24.3
12.0
14.3
15.9
17.8
20.1
23.2
24.7
26.7
13.2
15.3
17.2
19.3
22.0
25.2
27.0
29.4
14.2
16.4
18.6
20.9
23.9
27.3
29.2
31.5
14.7
17.9
20.0
22.2
25.3
29.1
31.0
33.7
26.8
30.7
32.8
36.3
0.66
0.70
0.74
0.78
0.85
0.94
1.08
1.11
0.66
0.74
0.72
0.81
0.86
0.89
1.00
0.96
0.73
0.74
0.74
0.83
0.84
0.91
0.92
1.01
0.73
0.80
0.80
0.85
0.91
0.93
0.95
0.97
0.76
0.82
0.81
0.85
0.91
1.00
0.96
1.04
0.85
1.00
1.01
1.07
0.76
0.81
0.85
0.90
0.98
1.09
1.25
1.28
0.77
0.85
0.84
0.94
1.00
1.02
1.15
1.11
0.84
0.86
0.85
0.96
0.97
1.05
1.07
1.16
0.85
0.92
0.92
0.98
1.05
1.08
1.10
1.12
0.88
0.94
0.93
0.98
1.06
1.15
1.10
1.20
0.97
1.15
1.17
1.23
92
Rotors
www.rainbird.com
2005 – 2006 Catalog
Rotors
METRIC
■
Pressure
bars
3,5
4,0
4,5
5,0
Nozzle
• 12
• 14
• 16
• 18
• 20
• 22
• 24
26
• 12
• 14
• 16
• 18
• 20
• 22
• 24
26
• 12
• 14
• 16
• 18
• 20
• 22
• 24
26
• 12
• 14
• 16
• 18
• 20
• 22
• 24
26
■
▲
▲
■
Radius Flow
m
m3⁄h
Flow
l/s
Precip Precip
mm/h mm/h
Pressure
bars
17,4
18,0
18,7
19,2
19,9
20,0
19,3
20,0
17,9
18,5
19,6
19,7
20,3
21,3
20,7
21,8
18,0
18,9
20,1
20,1
21,1
22,0
22,0
22,6
18,1
19,2
20,4
20,6
21,6
22,4
23,0
23,2
0,70
0,80
0,91
1,02
1,18
1,41
1,42
1,55
0,74
0,88
0,98
1,10
1,25
1,45
1,53
1,67
0,80
0,93
1,05
1,17
1,33
1,53
1,63
1,78
0,85
0,98
1,11
1,24
1,42
1,62
1,74
1,89
17
18
19
20
21
25
27
28
17
19
18
20
22
23
26
25
18
19
19
21
22
23
24
25
19
19
19
21
22
23
24
25
5,5
2,54
2,89
3,28
3,69
4,25
5,08
5,11
5,57
2,68
3,17
3,54
3,97
4,50
5,23
5,50
6,01
2,87
3,37
3,77
4,22
4,79
5,51
5,88
6,42
3,06
3,54
3,99
4,47
5,11
5,84
6,26
6,80
19
21
22
23
25
29
32
32
19
21
21
24
25
27
30
29
20
22
22
24
25
26
28
29
22
22
22
24
25
27
27
29
6,0
6,5
6,9
Nozzle
• 12
• 14
• 16
• 18
• 20
• 22
• 24
26
• 12
• 14
• 16
• 18
• 20
• 22
• 24
26
• 20
• 22
• 24
26
• 20
• 22
• 24
26
▲
Radius Flow
m
m3⁄h
Flow
l/s
Precip Precip
mm/h mm/h
18,6
19,2
20,4
21,0
21,6
22,8
23,5
24,1
18,6
19,6
20,9
21,5
22,1
22,9
23,9
24,1
22,5
23,4
24,1
24,3
22,9
23,5
24,1
24,7
0,89
1,03
1,17
1,31
1,50
1,72
1,84
1,98
0,92
1,10
1,23
1,37
1,57
1,86
1,92
2,08
1,63
1,90
2,00
2,19
1,69
1,93
2,07
2,29
19
20
20
21
23
24
24
25
19
21
20
21
23
26
24
26
23
25
25
27
23
25
26
27
3,22
3,72
4,22
4,74
5,42
6,19
6,62
7,14
3,30
3,96
4,45
4,95
5,65
6,71
6,92
7,50
5,89
6,84
7,22
7,91
6,09
6,97
7,45
8,24
21
23
23
25
27
28
28
28
22
24
24
25
27
30
28
30
27
29
29
31
27
29
30
31
2005 – 2006 Catalog
www.rainbird.com
Rotors
93
Rotors
Full- or Part-Circle Impact Rotor Pop-Up Sprinklers
2045A Maxi-Paw
™
4", 6", 12" (10 cm, 30 cm)
Primary Application
Dirty water applications - spacing up to 45 feet (13,7 m).
• Multi-function, pressure-activated wiper seal.
• FP trip for full- or part-circle operation.
• Inlet filter screen.
• Combination 1⁄2" (15/21) or 3⁄4" (20/27) bottom inlet.
• Serviceable through the top of the case.
The Maxi-Paw’s powerful throw permits maximum spacing and
offers superior close-in watering and uniform water distribution.
Low pressure loss and an efficient, straight-through flow design
conserve energy and are ideal for dirty water applications. The
Options
optional Seal-A-Matic™ prevents run-off, puddling, and erosion
caused by low head drainage. And most important, it's rugged and • Optional internal Seal-A-Matic (SAM) prevents puddling and erosion
caused by low head drainage and saves water (hold back 10'
dependable, popping up on schedule again and again because of
(3,1 m) or head)
the multi-function wiper seal. The Maxi-Paw Rotor–a tradition of
• New optional non-potable cover for easy identification of reclaimed
excellence.
water
Features
Operating Range
• Five interchangeable, color-coded MPR nozzles.
• Precipitation Rate: 0.23 to 1.05 inches per hour (5,8 to 26,6 mm/h)
• Two interchangeable low-angle (LA) nozzles.
• No tools required to change nozzles.
• Flow rate: 1.5 to 8.4 GPM (0,01 to 0,52 l/s; 0,36 to 1,86 m3/h)
• Heavy-duty plastic case with sturdy, reinforced ribbed design.
• Double-weighted arm for slower rotation and increased distance
of throw.
• Self-flushing inner trip with improved inner trip lever.
Specifications
• Powerful reverse action.
• Combination 1⁄2" (15/21) or 3⁄4" (20/27) female bottom inlet
• Adjustable arm spring for low-pressure and low-gallonage
• 1⁄2" (15/21) female side inlet
operation.
• Nozzles: 06-red; 07-black; 08-blue; 10-yellow; 12-beige
• Energy efficient, low-pressure and low-gallonage operation.
• LA nozzles: 07LA-black; 10LA-yellow
• Proven impact drive.
• Nozzle outlet trajectory is 23°.
• Straight-through flow for dirty water applications.
• LA nozzle outlet trajectory is 11°.
• Full-circle or adjustable arc 20° to 340°.
• Side inlet installation is not
• Precision Jet Tube (PJ™).
recommended in freezing climates.
• Hooded bearing.
• Distance controller diffuser pin.
Dimensions
Models
• 2045A Maxi-Paw
• 2045A Maxi-Paw-SAM
• 2045A Maxi-Paw-SAM-NP
Optional
Feature
SAM
Model
2045A
Maxi-Paw
94
Optional
Feature
Low Angle
Nozzle
Nozzle Size
10
How to Specify
2045A- SAM-10- LA
Rotors
2045A Maxi-Paw
Available Nozzles
• Standard trajectory
• 06, 07, 08, 10, 12
• Low angle
• 07LA, 10LA
www.rainbird.com
2005 – 2006 Catalog
Rotors
Maxi-Paw ™/Maxi-Paw SAM Performance
METRIC
Pressure
psi
25
35
45
55
60
Nozzle
• 0706 LA
• 07
• 08
• 10 LA
• 10
• 12
• 06
• 07 LA
• 07
• 08
• 10 LA
• 10
• 12
• 06
• 07 LA
• 07
• 08
• 10 LA
• 10
• 12
• 06
• 07 LA
• 07
• 08
• 10 LA
• 10
• 12
• 06
• 07 LA
• 07
• 08
• 10 LA
• 10
• 12
•
■
▲
■
Radius
ft.
Flow
GPM
Precip
In/h
Precip
In/h
Pressure
bars
22
32
35
25
38
39
37
23
37
38
29
41
42
38
25
39
40
31
42
44
38
25
41
41
32
43
45
38
25
41
42
32
44
45
1.5
2.2
2.8
3.4
4.2
5.5
2.0
1.9
2.7
3.3
4.0
4.8
6.3
2.3
2.1
3.0
3.7
4.5
5.4
7.1
2.5
2.3
3.3
4.1
5.0
6.0
7.9
2.6
2.4
3.5
4.2
5.4
6.4
8.4
0.60
0.41
0.44
1.05
0.56
0.70
0.28
0.69
0.38
0.44
0.92
0.55
0.69
0.31
0.65
0.38
0.45
0.90
0.59
0.71
0.33
0.71
0.38
0.47
0.94
0.62
0.75
0.35
0.74
0.40
0.46
1.02
0.64
0.80
0.69
0.48
0.51
1.21
0.65
0.80
0.32
0.80
0.44
0.51
1.06
0.64
0.79
0.35
0.75
0.44
0.51
1.04
0.68
0.82
0.39
0.82
0.44
0.54
1.09
0.72
0.87
0.40
0.85
0.46
0.53
1.17
0.74
0.92
2,0
2,5
3,0
3,5
4,0
Nozzle
• 0607 LA
• 07
• 08
• 10 LA
• 10
• 12
• 06
• 07 LA
• 07
• 08
• 10 LA
• 10
• 12
• 06
• 07 LA
• 07
• 08
• 10 LA
• 10
• 12
• 06
• 07 LA
• 07
• 08
• 10 LA
• 10
• 12
• 06
• 07 LA
• 07
• 08
• 10 LA
• 10
• 12
•
▲
Radius Flow
m
m3⁄h
Flow
l/s
Precip Precip
mm/h mm/h
6,8
10,4
11,0
8,1
11,9
12,3
11,3
7,1
11,4
11,7
8,9
12,5
12,9
11,5
7,5
11,8
12,1
9,4
12,8
13,3
11,6
7,6
12,2
12,4
9,6
13,0
13,6
11,6
7,6
12,5
12,7
9,8
13,3
13,7
0,10
0,15
0,19
0,23
0,28
0,37
0,13
0,12
0,17
0,21
0,26
0,31
0,40
0,14
0,13
0,19
0,23
0,28
0,34
0,44
0,15
0,14
0,20
0,25
0,30
0,36
0,48
0,16
0,15
0,22
0,26
0,33
0,39
0,52
16
10
11
25
14
18
7
17
10
11
23
14
18
8
17
10
11
23
15
18
8
17
10
12
23
15
19
9
18
10
12
25
16
20
0,38
0,55
0,68
0,83
1,01
1,32
0,46
0,44
0,62
0,76
0,92
1,11
1,45
0,51
0,47
0,67
0,83
1,01
1,21
1,59
0,55
0,50
0,72
0,89
1,09
1,30
1,72
0,58
0,54
0,78
0,94
1,19
1,42
1,86
19
12
13
29
16
20
8
20
11
13
27
16
20
9
19
11
13
27
17
21
9
20
11
13
27
18
21
10
21
11
14
29
19
23
Precipitation Rates based on half-circle operation
2045A Maxi-Paw Nozzles
2005 – 2006 Catalog
www.rainbird.com
Rotors
95
Rotors
Part-Circle Impact Rotor Pop-Up Sprinklers
27/37/47 Series
Primary Application
Dirty water applications – Large turf areas with spacing up to 63 feet
(19,2 m).
Rain Bird’s 27/37/47 Series open-case rotors are proven superior in
dirty water. They offer uniform water distribution with an easy-toservice construction.
47AP
Features
•High-impact plastic case on AP and 47A-SAM models.
• Heavy-duty, brass pop-up assembly.
• Straight-through flow for excellent performance in dirty water.
• Adjustable arc 20° to 340°.
• Precision Jet tube (PJ™) minimizes side splash.
• Inlet filter screen and flushing action protect internal assembly
from debris.
• Long-wearing TNT bearing.
• Easy to rebuild and repair.
• Diffuser screw on 27AP and 37AP models allows radius reduction
up to 25% without changing nozzles.
• Optional, two-piece rubber cover on all models for added safety.
• Optional, internal Stopamatic ® valve on 47A eliminates puddling and
erosion caused by low-head drainage, saving water and money.
Operating Range
47AP-RC
47AP - SAM - 14
Nozzle Size
14
Note: For non-U.S. applications,
it is necessary to specify NPT or BSP
thread type.
96
How to Specify
Model
47AP
Optional
Feature
SAM:
Stopamatic
check
valve
Rotors
www.rainbird.com
2005 – 2006 Catalog
Rotors
Specifications
• 1" (26/34) female-threaded inlet
• 1" (26/34) female BSP threaded inlet (47AP, 47AP-RC, 47A-SAM,
and 47A-SAM-RC models only)
• 27AP: For standard nozzle at 60 psi (4,1 bars), the highest point of
stream is 10 feet (3,1 m) above nozzle. Nozzle outlet trajectory is 25°.
• 37AP: For standard nozzle at 60 psi (4,1 bars), the highest point
of stream is 10 feet, 6 inches (3,2 m) above nozzle. Nozzle outlet
trajectory is 25°.
• 47A-SAM, 47AP: For standard nozzle at 70 psi (5,0 bars),
the highest point of stream is 12 feet (3,7 m) above nozzle.
Nozzle outlet trajectory is 23°.
Dimensions with Standard Cover
• 27AP/37AP/47AP overall height: 10" (25,4 cm)
• 47A-SAM overall height: 12 7⁄ 8" (32,7 cm)
• 27AP/37AP/47AP/47A-SAM pop-up height: 2 5⁄ 16" (5,9 cm)
• 27AP/37AP/47AP exposed surface diameter: 6" (15,2 cm)
• 47A-SAM exposed surface diameter: 6 1⁄ 4" (15,9 cm)
Models
• 27AP
• 37AP
• 47AP
• 27AP-RC: Rubber cover
• 47AP-BSP: BSP threaded
• 47AP-RC-BSP: Rubber cover, BSP threaded
• 47A-SAM
• 47A-SAM-RC: Rubber cover
• 47A-SAM-BSP: BSP threaded
• 47A-SAM-RC-BSP: Rubber cover, BSP threaded
Note: For non-U.S. applications, it is necessary to specify NPT or BSP thread type.
Dimensions with Rubber Cover
• 27AP/37AP/47AP overall height: 10 1⁄ 2" (26,7 cm)
• 47A-SAM overall height: 13 1⁄ 4" (33,7 cm)
• 27AP/37AP/47AP/47A-SAM pop-up height: 2 5⁄ 16" (5,9 cm)
• 27AP/37AP/47AP exposed surface diameter: 6 1⁄ 2" (16,5 cm)
• 47A-SAM exposed surface diameter: 6 3⁄ 4" (17,1 cm)
2005 – 2006 Catalog
www.rainbird.com
Rotors
97
Rotors
27AP Performance
METRIC
■
▲
■
▲
Pressure
psi
Nozzle
Radius
ft.
Flow
GPM
Precip
In/h
Precip
In/h
Pressure
bars
Nozzle
Radius Flow
m
m3⁄h
Flow
l/s
Precip Precip
mm/h mm/h
40
09
10 *
11
12
09
10 *
11
12
09
10 *
11
12
09
10 *
11
12
09
10 *
11
12
41
42
42
41
42
43
44
42
42
43
45
42
43
44
43
44
45
-
4.4
5.3
6.3
3.9
4.9
5.9
7.0
4.3
5.4
6.5
7.7
4.6
5.8
7.0
4.9
6.2
7.5
-
0.50
0.58
0.69
0.45
0.54
0.61
0.70
0.47
0.59
0.68
0.73
0.50
0.60
0.70
0.51
0.62
0.71
-
0.58
0.67
0.79
0.52
0.62
0.71
0.80
0.54
0.68
0.78
0.85
0.58
0.70
0.80
0.59
0.71
0.82
-
2,8
09
10 *
11
12
09
10 *
11
12
09
10 *
11
12
09
10 *
11
12
09
10 *
11
12
09
10 *
11
12
09
10 *
11
12
12,5
12,8
12,8
12,6
12,9
13,0
12,5
12,7
13,0
13,4
12,7
12,9
13,2
13,7
12,8
13,0
13,3
12,9
13,2
13,5
13,1
13,4
13,7
-
0,28
0,33
0,40
0,29
0,35
0,41
0,25
0,31
0,37
0,44
0,26
0,33
0,40
0,48
0,28
0,35
0,42
0,29
0,37
0,45
0,31
0,39
0,47
-
13
15
17
13
15
18
11
14
16
18
12
14
17
18
12
15
17
13
15
18
13
16
18
-
50
60
70
80
3,0
3,5
4,0
4,5
5,0
* Standard Nozzle Size
5,5
1,00
1,20
1,43
1,04
1,26
1,49
0,89
1,12
1,35
1,60
0,95
1,19
1,44
1,72
1,01
1,27
1,53
1,06
1,34
1,62
1,11
1,41
1,70
-
15
17
20
15
17
20
13
16
18
21
14
17
19
21
14
17
20
15
18
20
15
18
21
-
98
Rotors
www.rainbird.com
2005 – 2006 Catalog
Rotors
37AP Performance
METRIC
■
▲
■
▲
Pressure
psi
Nozzle
Radius
ft.
Flow
GPM
Precip
In/h
Precip
In/h
Pressure
bars
Nozzle
Radius Flow
m
m3⁄h
Flow
l/s
Precip Precip
mm/h mm/h
40
12
13
14*
15
12
13
14*
15
12
13
14*
15
12
13
14*
15
12
13
14*
15
43
43
44
44
44
45
45
45
45
46
46
46
46
47
47
47
47
48
48
7.3
8.4
9.6
7.0
8.2
9.4
10.8
7.7
9.0
10.4
11.8
8.3
9.8
11.3
12.8
8.9
10.5
12.1
13.7
0.76
0.87
0.96
0.70
0.82
0.89
1.03
0.73
0.86
0.95
1.07
0.76
0.89
0.99
1.12
0.78
0.92
1.01
1.15
0.88
1.01
1.10
0.80
0.94
1.03
1.19
0.85
0.99
1.09
1.24
0.87
1.03
1.14
1.29
0.90
1.06
1.17
1.32
2,8
12
13
14*
15
12
13
14*
15
12
13
14*
15
12
13
14*
15
12
13
14*
15
12
13
14*
15
12
13
14*
15
13,1
13,1
13,4
13,2
13,4
13,5
13,4
13,4
13,6
13,7
13,7
13,7
13,9
14,0
13,9
13,9
14,2
14,2
14,1
14,1
14,4
14,4
14,3
14,3
14,6
14,6
0,46
0,53
0,61
0,48
0,55
0,63
0,44
0,52
0,60
0,68
0,47
0,55
0,64
0,73
0,50
0,59
0,68
0,77
0,53
0,63
0,72
0,82
0,56
0,66
0,76
0,86
19
22
24
20
22
25
18
21
23
26
18
21
24
27
19
22
24
28
19
23
25
28
20
23
26
29
50
60
70
80
3,0
3,5
4,0
4,5
5,0
5,5
1,66
1,91
2,18
1,73
1,99
2,28
1,59
1,87
2,15
2,45
1,71
2,00
2,30
2,62
1,82
2,13
2,45
2,79
1,92
2,26
2,61
2,95
2,02
2,38
2,75
3,11
22
26
28
23
26
29
20
24
27
30
21
25
28
31
22
26
28
32
22
26
29
33
23
27
30
34
2005 – 2006 Catalog
www.rainbird.com
Rotors
99
Rotors
47AP/47A-SAM Performance
METRIC
■
▲
■
▲
Pressure
psi
Nozzle
Radius
ft.
Flow
GPM
Precip
In/h
Precip
In/h
Pressure
bars
Nozzle
Radius Flow
m
m3⁄h
Flow
l/s
Precip Precip
mm/h mm/h
60
14
15
16 *
17
18
14
15
16 *
17
18
14
15
16 *
17
18
14
15
16 *
17
18
14
15
16 *
17
18
54
55
56
57
57
56
57
58
59
59
57
58
59
60
61
59
60
61
62
63
60
61
62
-
10.8
12.7
14.0
15.5
17.6
11.7
13.9
15.2
17.1
19.1
12.6
14.9
16.4
18.6
20.5
13.4
15.9
17.3
20.0
21.8
14.2
16.9
18.3
-
0.71
0.81
0.86
0.92
1.04
0.72
0.82
0.87
0.95
1.06
0.75
0.85
0.91
1.00
1.06
0.74
0.85
0.90
1.00
1.06
0.76
0.87
0.92
-
0.82
0.93
0.99
1.06
1.20
0.83
0.95
1.00
1.09
1.22
0.86
0.99
1.05
1.15
1.23
0.86
0.98
1.03
1.16
1.22
0.88
1.01
1.06
-
4,1
14
15
16 *
17
18
14
15
16 *
17
18
14
15
16 *
17
18
14
15
16 *
17
18
14
15
16 *
17
18
14
15
16 *
17
18
14
15
16 *
17
18
16,5
16,8
17,1
17,4
17,4
16,8
17,1
17,4
17,7
17,7
17,1
17,4
17,7
18,0
18,1
17,4
17,7
18,0
18,4
18,6
17,8
18,1
18,4
18,7
19,0
18,1
18,4
18,7
18,3
18,6
18,9
-
0,68
0,80
0,88
0,98
1,11
0,71
0,84
0,92
1,03
1,16
0,75
0,89
0,97
1,10
1,22
0,79
0,93
1,02
1,17
1,29
0,83
0,98
1,07
1,23
1,35
0,87
1,03
1,12
0,89
1,07
1,15
-
18
20
22
23
26
18
21
22
24
27
18
21
22
24
27
19
21
23
25
27
19
22
23
25
27
19
22
23
19
22
23
-
70
80
90
100
4,5
5,0
5,5
6,0
6,5
6,9
2,45
2,88
3,18
3,52
4,00
2,56
3,02
3,33
3,71
4,17
2,70
3,20
3,50
3,95
4,40
2,84
3,37
3,68
4,20
4,63
2,98
3,54
3,86
4,45
4,86
3,12
3,71
4,03
3,22
3,84
4,15
-
21
24
25
27
31
21
24
25
27
31
21
24
26
28
31
22
25
26
29
31
22
25
26
29
31
22
25
27
22
26
27
-
100
Rotors
www.rainbird.com
2005 – 2006 Catalog
Rotors
Full-Circle Impact Rotor Pop-Up Sprinklers
21/31/41-51 Series
Primary Application
Dirty water applications – Large turf areas with spacing up to 83
feet (25,3 m).
Rain Bird’s 21/31/41-51 Series open-case rotors are proven
superior in dirty water. They offer uniform water distribution with an
easy-to-service construction.
Features
• Heavy-duty, brass pop-up assembly.
• Straight-through flow for excellent performance in dirty water.
• Inlet filter screen and flushing action protect internal
assembly from debris.
• Easy to rebuild and repair.
• Color-coded plastic range nozzles on 41-51AP, and 41-51A-SAM.
• Diffuser screw on 21AP and 31AP allows up to 25% radius
reduction without changing nozzles.
• Double-slotted spreader nozzle on 41-51A and 41-51AP for
optimal mid-range and close-in watering.
• Optional, two-piece rubber cover on all models for added safety.
• Optional, internal Stopamatic ® valve on 41-51A eliminates puddling
and erosion caused by low-head drainage, saving water and money.
41-51AP
41-51A-SAM
Operating Range
2005 – 2006 Catalog
www.rainbird.com
41-51AP-RC
41-51AP-SAM-18x11.5
Nozzle Size
18x11.5
How to Specify
Specifications
• 1" (26/34) female-threaded inlet
• 1" (26/34) female BSP threaded inlet
(41-51AP and 41-51A-SAM models only)
• 41-51AP: For standard nozzle at 70 psi (5 bars), the highest point
of stream is 12 feet (3,7 m) above nozzle. Nozzle outlet trajectory
is 23°.
• 21AP: For standard nozzle at 60 psi (4,1 bars), the highest point
of stream is 10 feet (3,1 m) above nozzle. Nozzle outlet trajectory
is 25°.
• 31AP: For standard nozzle at 60 psi (4,1 bars), the highest point of
stream is 10 feet, 6 inches (3,2 m) above nozzle. Nozzle outlet
trajectory is 25°.
Optional Feature
SAM: Stopamatic
Check Valve
Model
41-51AP
Note: For non-U.S. applications,
it is necessary to specify NPT or
BSP thread type.
Rotors
101
Rotors
21/31/41-51 Series
Continued
Specifications Continued
• 41-51A-SAM: For standard nozzle at 70 psi (5 bars), the highest
point of stream is 17 feet (5,2 m) above nozzle. Nozzle outlet
trajectory is 23°.
Dimensions (with standard cover)
• 21AP/31AP/41-51AP overall height: 10" (25,4 cm)
• 41-51A-SAM overall height: 127⁄8" (32,7 cm)
• 21AP/31AP/41-51AP/41-51A-SAM pop-up height: 2 5⁄16" (5,9 cm)
• 21AP/31AP/41-51AP exposed surface diameter: 6" (15,2 cm)
• 41-51A-SAM exposed surface diameter: 6 1⁄4" (15,9 cm)
Dimensions (with rubber cover)
• 21AP/31AP/41-51AP overall height: 10 1⁄2" (26,7 cm)
• 41-51A-SAM overall height: 13 1⁄4" (33,7 cm)
• 21AP/31AP/41-51AP/41-51A-SAM pop-up height: 2 5⁄16" (5,9 cm)
• 21AP/31AP/41-51AP exposed surface diameter: 6 1⁄2" (16,5 cm)
• 41-51A-SAM exposed surface diameter: 6 3⁄4" (17,1 cm)
Models
• 21AP
• 31AP
• 41-51AP
• 41-51AP-BSP: BSP threaded
• 41-51AP-RC: Rubber cover
• 41-51AP-RC-BSP: Rubber cover, BSP threaded
• 41-51A-SAM
• 41-51A-SAM-BSP: BSP threaded
• 41-51A-SAM-RC: Rubber cover
• 41-51A-SAM-RC-BSP: Rubber cover, BSP threaded
102
Rotors
www.rainbird.com
2005 – 2006 Catalog
Rotors
21AP Performance
METRIC
■
▲
■
▲
Pressure
psi
Nozzle
Radius
ft.
Flow
GPM
Precip
In/h
Precip
In/h
Pressure
bars
Nozzle
Radius Flow
m
m3⁄h
Flow
l/s
Precip Precip
mm/h mm/h
40
08
09
10 *
11
08
09
10 *
11
08
09
10 *
11
08
09
10 *
11
08
09
10 *
11
41
42
43
43
42
43
44
45
43
44
45
46
43
44
45
47
44
45
46
47
2.8
3.5
4.4
5.3
3.2
3.9
4.9
5.9
3.5
4.3
5.4
6.5
3.8
4.6
5.8
7.0
4.0
4.9
6.2
7.5
0.16
0.19
0.23
0.28
0.17
0.20
0.24
0.28
0.18
0.21
0.26
0.30
0.20
0.23
0.28
0.31
0.20
0.23
0.28
0.33
0.19
0.22
0.26
0.32
0.20
0.23
0.28
0.32
0.21
0.25
0.30
0.34
0.23
0.26
0.32
0.35
0.23
0.27
0.33
0.38
2,8
08
09
10 *
11
08
09
10 *
11
08
09
10 *
11
08
09
10 *
11
08
09
10 *
11
08
09
10 *
11
08
09
10 *
11
12,5
12,8
13,1
13,1
12,6
12,9
13,3
13,4
12,8
13,1
13,4
13,6
12,9
13,3
13,6
13,8
13,1
13,4
13,7
14,1
13,3
13,6
13,9
14,3
13,4
13,7
14,0
14,3
0,18
0,22
0,28
0,33
0,19
0,23
0,29
0,35
0,20
0,25
0,31
0,37
0,21
0,26
0,33
0,40
0,23
0,28
0,35
0,42
0,24
0,29
0,37
0,45
0,25
0,31
0,39
0,47
4
5
6
7
4
5
6
7
4
5
6
7
5
5
6
7
5
6
7
8
5
6
7
8
5
6
7
8
50
60
70
80
3,0
3,5
4,0
4,5
5,0
Precipitation Rates based on full-circle operation.
5,5
0,64
0,79
1,00
1,20
0,67
0,83
1,04
1,26
0,72
0,89
1,12
1,35
0,77
0,95
1,19
1,44
0,82
1,00
1,27
1,53
0,87
1,06
1,34
1,64
0,91
1,11
1,41
1,70
5
6
7
8
5
6
7
8
5
6
7
8
5
6
7
9
6
6
8
9
6
7
8
9
6
7
8
10
2005 – 2006 Catalog
www.rainbird.com
Rotors
103
Rotors
31AP Performance
METRIC
■
▲
■
▲
Pressure
psi
Nozzle
Radius
ft.
Flow
GPM
Precip
In/h
Precip
In/h
Pressure
bars
Nozzle
Radius Flow
m
m3⁄h
Flow
l/s
Precip Precip
mm/h mm/h
40
12
13
14 *
15
12
13
14 *
15
12
13
14 *
15
12
13
14 *
15
12
13
14 *
15
44
44
44
45
45
45
46
46
46
46
47
47
47
47
48
48
48
48
49
49
6.3
7.3
8.4
9.6
7
8.2
9.4
10.8
7.7
9
10.4
11.8
8.3
9.8
11.3
12.8
8.9
10.5
12.1
13.7
0.31
0.36
0.42
0.46
0.33
0.39
0.43
0.49
0.35
0.41
0.45
0.51
0.36
0.43
0.47
0.54
0.37
0.44
0.49
0.55
0.36
0.42
0.48
0.53
0.38
0.45
0.49
0.57
0.40
0.47
0.52
0.59
0.42
0.49
0.55
0.62
0.43
0.51
0.56
0.63
2,8
12
13
14 *
15
12
13
14 *
15
12
13
14 *
15
12
13
14 *
15
12
13
14 *
15
12
13
14 *
15
12
13
14 *
15
13,4
13,4
13,4
13,7
13,5
13,5
13,7
13,8
13,7
13,7
13,9
14,1
14,0
14,0
14,2
14,3
14,2
14,2
14,5
14,5
14,4
14,4
14,7
14,7
14,6
14,6
14,9
14,9
0,40
0,46
0,53
0,60
0,41
0,48
0,55
0,63
0,44
0,52
0,60
0,68
0,47
0,55
0,64
0,73
0,50
0,59
0,68
0,77
0,53
0,63
0,72
0,82
0,56
0,66
0,76
0,86
8
9
11
12
8
9
11
12
8
10
11
12
9
10
11
13
9
11
12
13
9
11
12
14
9
11
12
14
50
60
70
80
3,0
3,5
4,0
4,5
5,0
5,5
1,43
1,66
1,91
2,18
1,49
1,73
1,99
2,28
1,60
1,87
2,15
2,45
1,70
2,00
2,30
2,62
1,81
2,13
2,45
2,79
1,92
2,26
2,61
2,95
2,02
2,38
2,75
3,11
9
11
12
13
9
11
12
14
10
11
13
14
10
12
13
15
10
12
14
15
11
13
14
16
11
13
14
16
104
Rotors
www.rainbird.com
2005 – 2006 Catalog
Rotors
41-51AP/41-51A-SAM Performance
■
▲
■
▲
Pressure
psi
Nozzle
Radius
ft.
Flow
GPM
Precip
In/h
Precip
In/h
Pressure
psi
Nozzle
Radius
ft.
Flow
GPM
Precip
In/h
Precip
In/h
50
11 x 11
12 x 11
13 x 11
14 x 11 *
16 x 11
18 x 11.5
20 x 11.5
22 x 13
24 x 13
11 x 11
12 x 11
13 x 11
14 x 11 *
16 x 11
18 x 11.5
20 x 11.5
22 x 13
24 x 13
11 x 11
12 x 11
13 x 11
14 x 11 *
16 x 11
18 x 11.5
20 x 11.5
22 x 13
24 x 13
52
53
55
57
60
62
65
69
72
54
55
57
59
62
65
68
71
75
56
57
59
61
64
67
70
74
77
12.4
13.4
14.5
16.6
19.0
21.7
24.7
28.9
33.3
13.5
14.6
15.8
18.0
20.7
23.7
26.9
31.4
36.3
14.5
15.7
16.9
19.4
22.2
25.5
28.9
33.8
39.0
0.44
0.46
0.46
0.49
0.51
0.54
0.56
0.58
0.62
0.45
0.46
0.47
0.50
0.52
0.54
0.56
0.60
0.62
0.45
0.47
0.47
0.50
0.52
0.55
0.57
0.59
0.63
0.51
0.53
0.53
0.57
0.59
0.63
0.65
0.68
0.71
0.51
0.54
0.54
0.58
0.60
0.62
0.65
0.69
0.72
0.51
0.54
0.54
0.58
0.60
0.63
0.66
0.69
0.73
80
11 x 11
12 x 11
13 x 11
14 x 11 *
16 x 11
18 x 11.5
20 x 11.5
22 x 13
24 x 13
11 x 11
12 x 11
13 x 11
14 x 11 *
16 x 11
18 x 11.5
20 x 11.5
22 x 13
24 x 13
11 x 11
12 x 11
13 x 11
14 x 11 *
16 x 11
18 x 11.5
20 x 11.5
22 x 13
24 x 13
57
59
60
63
66
69
72
76
79
59
60
62
65
68
71
74
78
81
60
62
63
66
69
72
75
79
83
15.5
16.7
18.0
20.7
23.7
27.1
30.8
36.0
41.5
16.4
17.6
19.1
21.8
25.0
28.7
32.6
38.1
43.9
17.2
18.5
20.1
23.0
26.3
30.2
34.2
40.0
46.1
0.46
0.46
0.48
0.50
0.52
0.55
0.57
0.60
0.64
0.45
0.47
0.48
0.50
0.52
0.55
0.57
0.60
0.64
0.46
0.46
0.49
0.51
0.53
0.56
0.59
0.62
0.64
0.53
0.53
0.56
0.58
0.61
0.63
0.66
0.69
0.74
0.52
0.54
0.55
0.57
0.60
0.63
0.66
0.70
0.74
0.53
0.54
0.56
0.59
0.61
0.65
0.68
0.71
0.74
60
70
••
•
••
••
••
••
••
••
••
••
••
••
•
90
100
••
•
••
••
••
••
••
••
••
••
••
••
•
2005 – 2006 Catalog
www.rainbird.com
Rotors
105
Rotors
41-51AP/41-51A/41-51A-SAM Performance
■
METRIC
▲
■
▲
Pressure
bars
Nozzle
Radius Flow
m
m3⁄h
Flow
l/s
Precip Precip
mm/h mm/h
Pressure
bars
Nozzle
Radius Flow
m
m3⁄h
Flow
l/s
Precip Precip
mm/h mm/h
3,5
11 x 11
12 x 11
13 x 11
14 x 11 *
16 x 11
18 x 11,5
20 x 11,5
22 x 13
24 x 13
11 x 11
12 x 11
13 x 11
14 x 11 *
16 x 11
18 x 11,5
20 x 11,5
22 x 13
24 x 13
11 x 11
12 x 11
13 x 11
14 x 11 *
16 x 11
18 x 11,5
20 x 11,5
22 x 13
24 x 13
11 x 11
12 x 11
13 x 11
14 x 11 *
16 x 11
18 x 11,5
20 x 11,5
22 x 13
24 x 13
15,9
16,2
16,8
17,4
18,3
18,9
19,8
21,0
22,0
16,4
16,7
17,3
17,9
18,8
19,6
20,5
21,6
22,6
16,7
17,1
17,6
18,3
19,2
20,0
21,0
22,1
23,1
17,1
17,5
18,0
18,7
19,6
20,5
21,4
22,6
23,6
0,78
0,84
0,91
1,05
1,20
1,37
1,56
1,82
2,10
0,84
0,90
0,98
1,12
1,28
1,47
1,67
1,95
2,25
0,88
0,95
1,03
1,18
1,35
1,54
1,75
2,05
2,36
0,92
1,00
1,08
1,23
1,41
1,62
1,84
2,15
2,48
11
12
12
12
13
14
14
15
16
11
12
12
13
13
14
14
15
16
11
12
12
13
13
14
14
15
16
11
12
12
13
13
14
14
15
16
5,5
11 x 11
12 x 11
13 x 11
14 x 11 *
16 x 11
18 x 11,5
20 x 11,5
22 x 13
24 x 13
11 x 11
12 x 11
13 x 11
14 x 11 *
16 x 11
18 x 11,5
20 x 11,5
22 x 13
24 x 13
11 x 11
12 x 11
13 x 11
14 x 11 *
16 x 11
18 x 11,5
20 x 11,5
22 x 13
24 x 13
11 x 11
12 x 11
13 x 11
14 x 11 *
16 x 11
18 x 11,5
20 x 11,5
22 x 13
24 x 13
17,4
17,8
18,3
19,1
20,0
20,9
21,8
23,0
24,0
17,8
18,2
18,7
19,5
20,5
21,4
22,3
23,5
24,5
18,1
18,6
19,0
19,9
20,9
21,8
22,7
23,9
25,0
18,3
18,9
19,2
20,1
21,0
22,0
22,9
24,1
25,3
0,97
1,04
1,13
1,29
1,48
1,70
1,93
2,25
2,60
1,01
1,09
1,18
1,35
1,55
1,77
2,01
2,35
2,71
1,06
1,14
1,23
1,41
1,61
1,85
2,10
2,46
2,83
1,08
1,17
1,27
1,45
1,66
1,90
2,15
2,52
2,90
12
12
12
13
13
14
15
15
16
12
12
12
13
13
14
15
15
16
12
12
12
13
13
14
15
15
16
12
12
12
13
13
14
15
16
16
4,0
4,5
5,0
••
•
••
••
••
••
••
••
••
••
••
••
••
••
••
••
•
2,81
3,04
3,29
3,77
4,31
4,93
5,61
6,56
7,56
3,01
3,26
3,52
4,03
4,62
5,28
6,00
7,02
8,10
3,17
3,43
3,70
4,24
4,86
5,56
6,32
7,38
8,52
3,33
3,59
3,89
4,45
5,10
5,84
6,63
7,75
8,94
13
13
14
14
15
16
16
17
18
13
14
14
15
15
16
16
17
18
13
14
14
15
15
16
17
17
18
13
14
14
15
15
16
17
18
19
6,0
6,5
6,9
••
•
••
••
••
••
••
••
••
••
••
••
••
••
••
••
•
3,49
3,76
4,07
4,66
5,33
6,12
6,94
8,11
9,36
3,65
3,93
4,25
4,87
5,57
6,39
7,25
8,48
9,78
3,81
4,09
4,44
5,08
5,81
6,67
7,57
8,85
10,20
3,90
4,20
4,56
5,22
5,97
6,86
7,76
9,08
10,46
13
14
14
15
15
16
17
18
19
13
14
14
15
15
16
17
18
19
13
14
14
15
15
16
17
18
19
13
14
14
15
16
16
17
18
19
106
Rotors
www.rainbird.com
2005 – 2006 Catalog
Rotors
Swing Joints
TSJ Series
Primary Application
Connects 3⁄4" (1,9 cm), 1" (2,5 cm), and 11⁄2" (3,8 cm) sprinklers or
quick coupler valves to lateral pipes. Used to level heads to grade
and prevent damage to pipes.
Features
• All Rain Bird swing joints feature superior flow characteristics
through an innovative swept elbow design that reduces pressure
losses by over 50% compared to other swing joint designs.
• Double O-ring seals keep water in and dirt out, ensuring joints are
kept clean and can be repositioned more easily.
• Patented pressure relief vent allows trapped water to escape from
the joint threads, preventing O-ring damage or extrusion.
• Excellent structural integrity from the swept elbow design reduces
the costs associated with fatigue-related failures.
• Oversized threaded inlets and large visible stops make
hand-tightening simple.
• High operating pressure rating (315 psi) is perfect for use in
constant pressure situations.
• Spigot inlet available on 1” swing joints.
Operating Range
• Pressure Rating: 315 psi (21,7 bars) @ 73ºF (22,8ºC)
• 3⁄4" TSJ pressure loss: 0.3 psi (0,02 bar) at 6 GPM (0,4 l/s)
• 1" TSJ pressure loss: 1.5 psi (0,1 bar) at 18 GPM (1,1 l/s);
2.5 psi (0,2 bar) at 23 GPM (1,5 l/s)
• 1 1⁄ 2" TSJ pressure loss: 0.5 psi (0,03 bar) at 40 GPM (2,5 l/s); 1.6
psi (0,1 bar) at 70 GPM
Models
• TSJ-12075: 12" (30,5 cm) long, 3⁄4" (20/27) M x M NPT swing joint
• TSJ-12: 12" (30,5 cm) long, 1" (26/34) M x M NPT swing joint
• TSJ-12SPGT: 12" (30,5 cm) long, 1" (2,5 cm) spigot x 1" (26/34)
M NPT swing joint
• TSJ-12150: 12" (31 cm) long, 1 1⁄2" (40/49) M x M NPT swing joint
• TSJ-18: 18" (45,7 cm) long, 1" (26/34) M x M NPT swing joint
• TSJ-18SPGT: 18" (45,7 cm) long, 1" (2,5 cm) spigot x 1" (26/34)
M NPT swing joint
BSP version of TSJ-12 available
TSJ-12075, TSJ-12, TSJ-12SPGT,
TSJ-12150, TSJ-18SPGT, TSJ-18
2005 – 2006 Catalog
www.rainbird.com
Rotors
107
Rotors
Pressure Regulating Swing Joints
NEW
Features
• All the great features of the Rain Bird Turf Swing Joint combined
with a pressure regulating outlet elbow.
• Two pre-set regulation pressures: 45 psi (3,1 bars) for 3⁄4" model
and 70 psi (4,8 bars) for 1" model.
• Regulates and maintains constant pressure at the rotor inlet.
• Durable PVC housing matches the high strength of Rain Bird’s
swing joints.
• Rugged fabric reinforced elastomer diaphragm.
Operating Range
• 3⁄4" TSJ-PRS nominal pressure setting: 45 psi (3,1 bars)
• 1" TSJ-PRS nominal pressure setting: 70 psi (4,8 bars)
• Maximum flow: 22 GPM (1,4 l/s)
• Pressure Rating: 315 psi (21,7 bars) @ 73ºF (22,8ºC)
Models
• TSJ-075-PRS: 3⁄4" swing joint with 45 psi pressure regulator,
12" (30,5 cm) long, 3⁄4" (20/27) M x M NPT
• TSJ-100-PRS: 1" swing joint with 70 psi pressure regulator,
12" (30,5 cm) long, 1" (26/34) M x M NPT
TSJ-PRS Pressure Regulation
metric
standard
Swing Joint Outlet (Rotor Inlet)
Pressure (psi)
Primary Application
Provides pressure regulation for rotors with 3⁄4" and 1" inlets.
Improves rotor performance in high pressure applications. Ensures
optimal droplet size and improves uniformity by preventing overpressure conditions.
80
70
TSJ-100-PRS
60
50
TSJ-075-PRS
40
30
20
20 30
40
50
60
70
80
90 100 110 120 130 140 150
Swing Joint Inlet Pressure (psi)
metric
standard
METRIC
Swing Joint Outlet (Rotor Inlet)
Pressure (bars)
TSJ-PRS Series
5,5
4,8
TSJ-100-PRS
4,1
3,5
TSJ-075-PRS
2,8
2,1
1,4
1,4 2,1 2,8 3,5 4,1 4,8 5,5 6,2 6,9 7,6 8,3 9,0 9,7 10,3
Swing Joint Inlet Pressure (bars)
BSP version of 1" TSJ-100-PRS available
TSJ-075-PRS, TSJ-100-PRS
108
Rotors
www.rainbird.com
2005 – 2006 Catalog
Rotors
Rotor Accessories
T-Bird™ Accessories
R-50 Accessories
Falcon Accessories
ROTORTOOL
SAK-2 T-Bird
Adapter Assembly
A49119, A49400
Falcon ® Operating
Pressure Tester
Primary Application
Primary Application
Primary Application
Primary Application
The universal Rain Bird rotor tool. Adapts the liquid-filled pressure Additional covers for the R-50
Determine pressure at the
and R-50-SAM rotors for
rotor for use in on-site
gauge to T-Bird.
Features
special site needs.
troubleshooting.
• Flat blade screwdriver and pull- Features
Features
• Adapter assembly accepts
up tool all in one.
Features
the liquid-filled pressure gauge • Two-piece rubber cover retrofit • Simplifies troubleshooting of
Model
kit (A49119) for added safety.
from the SAK-2 kit to measure
existing system by accurately
• ROTORTOOL
Perfect for heavy-traffic areas
static or dynamic pressure.
measuring operating pressure
or sports fields.
• Threads on to any T-Bird body.
at the sprinkler head, using
• Non-potable water cap (A49400) a specific nozzle.
Model
has “Do Not Drink!” warning in • Falcon rotor riser and cover
• 171023: SAK-2 T-Bird Adapter
both English and Spanish for
assembly can be fitted directly
Assembly
easy identification of reclaimed
onto rotor in the field.
water.
• Nozzles can be changed in the
assembly, for more accurate
Models
pressure measurement.
• A49119: Two-piece rubber
•
Schrader valve mounted on riser
cover
allows
easy measurement of
• A49400: Purple, non-potable
field
operating
pressure.
cover
Note: Purple cover must be ordered
separately.
Model
• FALC-OPT
A49119
2-piece kit
ROTORTOOL
2005 – 2006 Catalog
A49119
www.rainbird.com
FALC-OPT
Rotors
109
Rotors
Tools
Tools
Falcon ®
Lifter Tool
Falcon ®
Support Tool
Maxi-Paw Wrench
POP-A-WAY ®
Sprinkler Wrench
Primary Application
For lifting Falcon nozzle housing
to insert nozzle.
Primary Application
For supporting nozzle housing in
raised position to insert nozzle.
Primary Application
For removing internal assembly
from case.
Primary Application
For removing pop-up
assembly from case on 15111A
and 15111B rotors.
Model
• 209226
Model
• 209227
Model
• 42064
Model
• 41045
Lifter Tool
209227
Support Tool
209226
42064
Lifter Tool, Support Tool
110
Rotors
www.rainbird.com
41045
2005 – 2006 Catalog
Rotors
Tools
Cast Iron Case
Spanner Wrench
Style “P” Driver
Rotor Bearing
Nipple Wrench
Rotor Body
Assembly Wrench
Primary Application
For installing and removing
21A, 31A, 41-51A, 27A,
37A, 47A rotors.
Primary Application
For removing vandal-resistant
cover screws from rubber-cover
impact rotors.
Primary Application
For holding bearing nipple while
assembling or removing body
from bearing on 21AP, 31AP,
41-51AP, 27AP, 37AP,
47A-SAM, and 41-51A-SAM
rotors.
Primary Application
For holding body while
assembling or removing
body from bearing on 21AP,
31AP, 41-51AP, 27AP, 37AP,
47A-SAM, and 41-51A-SAM
rotors.
Model
• 42001
Model
• 42049
Model
• 42005
Model
• 42006
42001
2005 – 2006 Catalog
42049
42006
www.rainbird.com
42005
Rotors
111
Rotors
Tools Tools
Anti-Theft Fittings
Adjustable Check Valve
Style “H” Driver
PVRA Series
ACV Series
Primary Application
For removing vandal-resistant
cover screws from plastic-cover
impact rotors.
Primary Application
Anti-theft fittings protect your
investment in quality irrigation
equipment by preventing
the removal of sprinklers
from above.
Primary Application
This check valve is adjustable to hold back 5 to 32 feet
(1,5 to 9,8 m) of pressure head – ideal for preventing the drainage
of water through a sprinkler head, keeping lines charged with water,
and preventing contamination of the irrigation system.
Model
• 42050
Features
• 360° swivel action
• Leak-free O-ring seal
• Fits Rain Bird spray heads
and 3⁄ 4" (20/27) inlet rotors
Operating Range
• Operating pressure up to
80 psi (5,5 bars)
Operating Range
Models
• PVRA-050:
3⁄ 4" x 1⁄ 2" (20/27 x 15/21)
F x M NPT
• PVRA-075:
3⁄ 4" x 3⁄ 4" (20/27) F x M NPT
Models
• ACV-050: 1⁄2" (15/21) F x M NPT
• ACV-075: 3⁄4" (20/27) F x M NPT
• ACV-100: 1" (26/34) F x M NPT
PVRA Series
42050
112
Features
• Prevents unwanted drainage through a sprinkler head
• Reduces water hammer and hydraulic stresses by keeping laterals
charged with water between irrigation cycles
• Adjusts to hold back from 5 to 32 feet (1,5 to 9,8 m) of pressure
head, 3 psi (0,2 bar) for each 360° turn of the adjustment screw
Rotors
ACV Series
www.rainbird.com
2005 – 2006 Catalog
Spray Heads
™
™
Rotary
Nozzles
Install Confidence.
Install Rain Bird Impacts.
®
®
Rotors
Impacts
Valves
Impacts
Controllers
Central
Controls
Pump Stations
Xerigation®
Accessories
Resources
& Training
Reference
Impacts
Major Products
2045-PJ
Maxi-Bird
20BP-ADJ
25BPJ-ADJ
35A-TNT
65PJADJ-TNT
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Slopes
Ground Cover/Shrubs
Low Pressure Systems
High Wind Areas
Effluent Water
114
Impacts
www.rainbird.com
2005 – 2006 Catalog
Impacts
Full- or Part-Circle Impact Sprinkler
2045-PJ Maxi-Bird
™
Primary Application
(15/21) riser-mounted impact head used for slope and
large-area, above-grade applications.
1⁄ 2"
Features
• Impact drive sprinkler.
• Double-weighted arm for slower rotation and increased
distance of throw.
• Straight-through flow for superior performance in dirty water.
• Adjustable arm spring for low-pressure and low-gallonage operation.
•Precision Jet tube (PJ ™) minimizes side splash.
• 5 Matched Precipitation Rate (MPR) nozzles and 2 low-angle (LA)
nozzles
• Interchangeable, color-coded bayonet mount nozzles
• No tools required to change nozzles.
• FP trip permits full- or part-circle operation (20° to 340°)
• Powerful reverse action.
Operating Range
Specifications
• 1⁄ 2" (15/21) male threaded inlet nozzles
• Nozzle outlet trajectory:
23° for 06, 07, 08, 10, and 12 nozzles.
• 11° for 07 LA and 10 LA
• Standard trajectory angle nozzles: 06-red; 07-black; 08-blue;
10-yellow; 12-beige
• Low angle (LA) nozzles: 07 LA-black; 10 LA-yellow
2045-PJ-08 Maxi-Bird
Model
• 2045-PJ-08 Maxi-Bird
2045-PJ-08 Nozzles
2005 – 2006 Catalog
www.rainbird.com
Impacts
115
Impacts
2045-PJ-08 Maxi-Bird Performance
METRIC
Pressure
psi
Nozzle
• 0706 LA
• 07
• 08 *
• 10 LA
• 10
• 12
• 06
• 07 LA
• 07
• 08 *
• 10 LA
• 10
• 12
• 06
• 07 LA
• 07
• 08 *
• 10 LA
• 10
• 12
• 06
• 07 LA
• 07
• 08 *
• 10 LA
• 10
• 12
• 06
• 07 LA
• 07
• 08 *
• 10 LA
• 10
• 12
•
25
35
45
55
60
■
▲
■
Radius
ft.
Flow
GPM
Precip
In/h
Precip
In/h
Pressure
bars
22
32
35
25
38
39
37
23
37
38
29
41
42
38
25
39
40
31
42
44
38
25
41
41
32
43
45
38
25
41
42
32
44
45
1.5
2.2
2.8
3.4
4.2
5.5
2.0
1.9
2.7
3.3
4.0
4.8
6.3
2.3
2.1
3.0
3.7
4.5
5.4
7.1
2.5
2.3
3.3
4.1
5.0
6.0
7.9
2.6
2.4
3.5
4.2
5.4
6.4
8.4
0.60
0.41
0.44
1.05
0.56
0.70
0.28
0.69
0.38
0.44
0.92
0.55
0.69
0.31
0.65
0.38
0.45
0.90
0.59
0.71
0.33
0.71
0.38
0.47
0.94
0.62
0.75
0.35
0.74
0.40
0.46
1.02
0.64
0.80
0.69
0.48
0.51
1.21
0.65
0.80
0.32
0.80
0.44
0.51
1.06
0.64
0.79
0.35
0.75
0.44
0.51
1.04
0.68
0.82
0.39
0.82
0.44
0.54
1.09
0.72
0.87
0.40
0.85
0.46
0.53
1.17
0.74
0.92
2,0
2,5
3,0
3,5
4,0
Nozzle
• 0607 LA
• 07
• 08
• 10 LA
• 10
• 12
• 06
• 07 LA
• 07
• 08
• 10 LA
• 10
• 12
• 06
• 07 LA
• 07
• 08
• 10 LA
• 10
• 12
• 06
• 07 LA
• 07
• 08
• 10 LA
• 10
• 12
• 06
• 07 LA
• 07
• 08
• 10 LA
• 10
• 12
•
▲
Radius Flow
m
m3⁄h
Flow
l/s
Precip Precip
mm/h mm/h
6,8
10,4
11,0
8,1
11,9
12,3
11,3
7,1
11,4
11,7
8,9
12,5
12,9
11,5
7,5
11,8
12,1
9,4
12,8
13,3
11,6
7,6
12,2
12,4
9,6
13,0
13,6
11,6
7,6
12,5
12,7
9,8
13,3
13,7
0,10
0,15
0,19
0,23
0,28
0,37
0,13
0,12
0,17
0,21
0,26
0,31
0,40
0,14
0,13
0,19
0,23
0,28
0,34
0,44
0,15
0,14
0,20
0,25
0,30
0,36
0,48
0,16
0,15
0,22
0,26
0,33
0,39
0,52
16
10
11
25
14
18
7
17
10
11
23
14
18
8
17
10
11
23
15
18
8
17
10
12
23
15
19
9
18
10
12
25
16
20
0,38
0,55
0,68
0,83
1,01
1,32
0,46
0,44
0,62
0,76
0,92
1,11
1,45
0,51
0,47
0,67
0,83
1,01
1,21
1,59
0,55
0,50
0,72
0,89
1,09
1,30
1,72
0,58
0,54
0,78
0,94
1,19
1,42
1,86
19
12
13
29
16
20
8
20
11
13
27
16
20
9
19
11
13
27
17
21
9
20
11
13
27
18
21
10
21
11
14
29
19
23
116
Impacts
www.rainbird.com
2005 – 2006 Catalog
Impacts
Full-Circle Impact Sprinkler
20B-ADJ
Primary Application
(15/21) riser-mounted impact head used for slope or
non-turf-area applications.
1⁄ 2"
Features
• Distance-control diffuser pin allows up to 25% radius reduction
• Rugged brass construction.
Operating Range
Specifications
• 1⁄ 2" (15/21) male threaded inlet.
• For 10 nozzle at normal operating pressure, the highest
point of stream is 7 feet (2,1 m) above nozzle.
• Nozzles: 08, 09, 10
Model
• 20B-ADJ
20B-ADJ- 08
How to Specify
Nozzle
08
2005 – 2006 Catalog
www.rainbird.com
Impacts
Model
20B-ADJ
117
Impacts
20B-ADJ Performance
METRIC
At 12" Above Finished Grade
15 ° Trajectory
■
▲
METRIC
At 15,2 cm Above Finished Grade
5 ° Trajectory
■
▲
Pressure
psi
Nozzle
Radius
ft.
Flow
GPM
Precip
In/h
Precip
In/h
Pressure
bars
Nozzle
Radius Flow
m
m3⁄h
Flow
l/s
Precip Precip
mm/h mm/h
30
08
09
10 *
08
09
10 *
08
09
10 *
08
09
10 *
08
09
10 *
38
39
39
39
40
40
40
41
41
40
41
41
40
41
41
2.4
3.1
3.8
2.9
3.6
4.4
3.2
4.0
5.0
3.6
4.4
5.5
3.9
4.8
5.9
0.16
0.20
0.24
0.18
0.22
0.26
0.19
0.23
0.29
0.22
0.25
0.32
0.23
0.27
0.34
0.18
0.23
0.28
0.21
0.25
0.31
0.22
0.26
0.33
0.25
0.29
0.36
0.27
0.32
0.39
2,1
08
09
10 *
08
09
10 *
08
09
10 *
08
09
10 *
08
09
10 *
08
09
10 *
08
09
10 *
11,6
11,9
11,9
11,8
12,1
12,1
11,9
12,2
12,2
12,0
12,3
12,3
12,1
12,4
12,4
12,2
12,5
12,5
12,2
12,5
12,5
0,15
0,20
0,24
0,17
0,21
0,26
0,19
0,23
0,29
0,20
0,25
0,31
0,22
0,27
0,34
0,24
0,29
0,36
0,25
0,30
0,37
4
5
6
4
5
6
5
6
7
5
6
7
5
6
8
6
7
8
6
7
9
40
50
60
70
2,5
3,0
3,5
4,0
4,5
4,8
0,54
0,70
0,86
0,61
0,77
0,95
0,67
0,84
1,04
0,73
0,91
1,13
0,79
0,98
1,21
0,85
1,05
1,30
0,89
1,09
1,34
5
6
7
5
6
7
5
7
8
6
7
9
6
7
9
7
8
10
7
8
10
Optimum water distribution achieved at 40 to 50 psi (2,8 to 3,5 bars).
118
Impacts
www.rainbird.com
2005 – 2006 Catalog
Impacts
25BPJ-ADJ Series
Primary Application
(15/21) riser-mounted impact head used for slope or large,
25BPJ-ADJ Series Performance
1⁄ 2"
Features
• FP trip allows full- or part-circle operation. Adjustable from 20° to 340°.
• Die-cast Precision Jet tube (PJ™) minimizes side splash.
• Rugged brass, bronze, and stainless steel construction.
Bronze body and arm, stainless steel trip assembly, brass bearing
sleeve and nipple. Stainless steel fulcrum pin, arm spring,
trip spring and friction collars.
Operating Range
Specifications
• 1⁄ 2" (15/21) male threaded inlet
• Nozzle outlet trajectory: 25°
• Nozzles: 09, 10
Models
• 25BPJ-FP-ADJ
• 25BPJ-FP-ADJ-DA
• 25BPJ-FP-ADJ-DA-TNT
• 25BPJ Special
Nozzle
Radius
ft.
Flow
GPM
Precip
In/h
Precip
In/h
30
09
10 *
09
10 *
09
10 *
38
39
39
40
40
41
3.1
3.8
3.6
4.4
4.0
5.0
0.41
0.48
0.46
0.53
0.48
0.57
0.48
0.56
0.53
0.61
0.56
0.66
40
50
METRIC
■
▲
Pressure
Nozzle
bars
Radius Flow
m
m3⁄h
Flow
l/s
Precip Precip
mm/h mm/h
2,1
09
10 *
09
10 *
09
10 *
09
10 *
11,6
11,9
11,8
12,1
12,0
12,3
12,2
12,5
0,20
0,24
0,21
0,26
0,23
0,29
0,25
0,32
10
12
11
13
12
14
12
15
2,5
3,5
25BPJ-FP-ADJ
▲
Pressure
psi
3,0
Brass nozzle with bridge-mounted stainless steel
diffuser pin and non-clog, barrel-type vane.
Diffuser pin allows up to 25% radius reduction
■
0,70
0,86
0,77
0,95
0,85
1,05
0,91
1,14
12
14
13
15
14
16
14
17
25BPJ-ADJ- 09
25BPJ-FP-ADJ-DA
25BPJ-ADJ-DA-TNT
25BPJ Special
Same as model 25BPJ-FP-ADJ, with
bridge-mounted DA distance control flap.
Same as model 25BPJ-FP-ADJ-DA,
with longer wearing TNT bearing.
Same as model 25 BPJ-FP-ADJ-DA-TNT,
with tamper-resistant friction collars and
fixed trip for part-circle operation only.
How to Specify
Nozzle
09
Model
25BPJ-ADJ
2005 – 2006 Catalog
www.rainbird.com
Impacts
119
Impacts
35A-TNT Series
Primary Application
(20/27) riser-mounted impact head used for slope or large,
non-turf applications.
3⁄ 4"
Features
• FP trip allows full- or part-circle operation. Adjustable from
20° to 340°.
• Stainless steel distance control diffuser pin and DA distance control
flap allow up to 25% radius reduction without changing nozzles.
• Rugged brass and stainless steel construction.
8 FLT MPR Nozzles
8 FLT MPR Nozzles
(20/27) male bearing. TNT bearing only. Cast
brass body and arm. Brass bearing sleeve and nipple. Stainless steel arm spring, trip spring, and trip
collars. Stainless steel trip can be
set for full- or part-circle operation.
Same as model 35A-TNT with
distance control diffuser pin (ADJ).
3⁄4"
Operating Range
• Precipitation Rate: 0.43 to 0.67 inches per hour
(11 to 17 mm/h)
Specifications
• 3⁄ 4" (20/27) male threaded inlet
8 FLT MPR Nozzles
8 FLT MPR Nozzles
Same as model 35A-TNT, with Precision Jet
tube (PJ™) and distance control flap (DA).
Same as model 35A-TNT, with Precision Jet tube
(PJ™) and distance control diffuser pin (ADJ).
Models
• 35A-TNT
• 35A-ADJ-TNT
• 35A-PJDA-TNT
• 35A-PJADJ-TNT
35A-PJADJ-TNT- 10
Model
35A-PJADJ-TNT
120
How to Specify
Nozzle
10
Impacts
www.rainbird.com
2005 – 2006 Catalog
Impacts
35A-TNT Series Performance
METRIC
■
▲
■
▲
Pressure
psi
Nozzle
Radius
ft.
Flow
GPM
Precip
In/h
Precip
In/h
Pressure
bars
Nozzle
Radius Flow
m
m3⁄h
Flow
l/s
Precip Precip
mm/h mm/h
30
10
11
12 *
10
11
12 *
10
11
12 *
10
11
12 *
42
43
44
44
45
47
45
47
49
46
48
51
3.9
4.6
5.5
4.5
5.4
6.4
5.0
6.0
7.2
5.4
6.6
7.8
0.43
0.48
0.55
0.45
0.51
0.56
0.48
0.52
0.58
0.49
0.55
0.58
0.49
0.55
0.63
0.52
0.59
0.64
0.55
0.60
0.67
0.57
0.64
0.67
2,1
10
11
12 *
10
11
12 *
10
11
12 *
10
11
12 *
10
11
12 *
10
11
12 *
12,8
13,1
13,4
13,1
13,5
13,9
13,4
13,9
14,5
13,7
14,3
15,0
14,0
14,6
15,5
14,0
14,6
15,6
0,25
0,29
0,35
0,27
0,32
0,38
0,29
0,35
0,42
0,31
0,38
0,45
0,34
0,41
0,49
0,34
0,42
0,49
11
12
14
11
13
14
12
13
14
12
13
15
12
14
15
12
14
15
40
50
60
2,5
3,0
3,5
4,0
4,1
0,89
1,04
1,25
0,97
1,15
1,37
1,05
1,26
1,50
1,13
1,37
1,63
1,21
1,48
1,75
1,23
1,50
1,77
12
14
16
13
15
16
13
15
17
14
16
17
14
16
17
14
16
17
2005 – 2006 Catalog
www.rainbird.com
Impacts
121
Impacts
65PJADJ-TNT
Primary Application
1" (26/34) riser-mounted impact head used for slope or large,
Features
• FP trip allows full- or part-circle operation. Adjustable from
20° to 340°.
• Stainless steel distance control diffuser pin allows up to 25%
radius reduction without changing nozzles.
• Rugged brass and stainless steel construction.
Operating Range
Specifications
• 1" (26/34) female NPT or BSP threaded inlet.
65PJADJ-TNT Performance
■
▲
Pressure
psi
Nozzle
Radius
ft.
Flow
GPM
Precip
In/h
Precip
In/h
50
60
70
80
16
16
16
16
57
58
63
65
12.9
14.2
15.4
16.5
0.76
0.81
0.75
0.75
0.88
0.94
0.86
0.87
METRIC
■
▲
Pressure
bars
Nozzle
Radius Flow
m
m3⁄h
Flow
l/s
Precip Precip
mm/h mm/h
3,5
4,0
4,5
5,0
5,5
16
16
16
16
16
17,4
17,9
18,5
19,2
19,8
0,81
0,88
0,93
0,99
1,04
19
20
19
19
19
2,93
3,16
3,35
3,55
3,75
22
23
23
22
22
Model
• 65PJADJ-TNT
• 65PJADJ-TNT-BSP: BSP model
65PJADJ- TNT
Model
65PJADJ-TNT
How to Specify
Nozzle
16
65PJADJ-TBT
122
Impacts
www.rainbird.com
2005 – 2006 Catalog
Impacts
Portable Irrigation Solution
TR Series Traveler
Primary Application
Provides an economical solution in situations where supplementary
irrigation is required or where in-ground watering systems are
either too costly or impractical. The Rain Bird TR is a self-propelled
irrigation unit powered by water pressure from the irrigation supply.
The TR Series Traveler is ideal for sports fields, schools, parks, sod
farms, polo fields, and arena dust control.
Features
• Enclosed drive gear mechanism
• Precise speed adjustment independent of flow at nozzle
• Automatic shut-down at end of path
• Simple set-up and operation
• Maintenance-free turbine and transmission
• Three year trade warranty
• Built-in pressure gauge
• High efficiency
• Simple, durable design
Cable
Anchor
Cable
Anchor
Ideal irrigation setup utilizing
two Rain Bird TR Travelers with
two points of connection on the
sides of the irrigated area.
Drag Hose
Drag Hose
Cable
Anchor
Alternate irrigation method
using one Rain Bird TR Traveler
and a single point of connection
on the side of the irrigated area.
Drag Hose
Cable
Anchor
Operating Range
(Rain Bird TR only using Rain Bird 14070EH brass impact sprinkler
unless otherwise noted)
• Path distance: up to 295 ft. or 440 ft. (90 m or 135 m) (depending
on model selected)
• Radius: up to 71 ft. (22,1 m)
• Maximum coverage of up to 582 ft. x 142 ft. (179,2 m by 44,2 m)
per lap
• Speed: adjustable from 35 to 75 ft. per hour (9,0 – 23,5 m/hour)
• Flow: 7.4 to 21.9 GPM (1,68 to 5,05 m3/h)
• Recommended hose size: 1 inch diameter
• Maximum hose length: 330 ft. (100 m) based on using
1 inch diameter hose
Cable
Anchor
Alternate irrigation method
using one Rain Bird TR Traveler
and a single point of connection
at the end of the irrigated area.
Drag Hose
Drag Hose
Cable
Anchor
TR - 135
Models
• TR-90: Four wheels, 90 meter (295 ft.) cable
• TR-135: Four wheels, 135 meter (440 ft.) cable
TR-135 shown with recommended
Rain Bird 14070EH Impact sprinkler
2005 – 2006 Catalog
www.rainbird.com
How to Specify
Cable Length
90 meters (295 ft.)
or 135 meters (440 ft.)
Model
TR
Note: Rain Bird 14070EH Impact
Sprinkler is included.
Impacts
123
Impacts
TR Series Traveler
Continued
Recommended Sprinklers:*
• 14070EH (data below)
• 65PJADJ-TNT (page 122)
• Falcon ® 6504 (page 82)
14070EH Performance
STRAIGHT BORE NOZZLE WITH VANE (SBN-3V) WITH SPREADER (LAN-1) (STREAM HEIGHT: 10 FT.)
psi
3/16" x 1/8"
Rad. GPM
13/64" x 1/8"
Rad. GPM
7/32" x 1/8"
Rad. GPM
15/64" x 1/8"
Rad. GPM
1/4" x 1/8"
Rad. GPM
17/64" x 1/8"
Rad. GPM
9/32" x 1/8"
Rad. GPM
35
40
45
50
55
60
65
70
75
80
51
52
53
53
54
55
55
56
56
57
53
54
55
56
56
57
58
58
59
60
55
56
57
58
59
60
61
62
62
63
56
57
59
60
61
62
63
64
65
66
57
59
60
62
63
64
65
66
67
69
57
59
61
63
65
67
68
69
-
57
60
62
64
66
68
69
71
-
8.7
9.3
9.9
10.4
10.9
11.4
11.9
12.4
12.8
13.2
9.8
10.5
11.1
11.7
12.3
12.8
13.3
13.8
14.3
14.8
10.9
11.7
12.4
13.1
13.7
14.3
14.9
15.4
16.0
16.5
11.5
12.4
13.1
13.8
14.4
15.1
15.7
16.3
16.9
17.5
12.7
13.7
14.4
15.3
16.1
16.7
17.4
18.1
18.7
19.3
14.1
15.0
16.0
16.8
17.7
18.4
19.2
20.0
-
15.5
16.5
17.6
18.5
19.4
20.2
21.1
21.9
-
METRIC
STRAIGHT BORE NOZZLE WITH VANE (SBN-3V) WITH SPREADER (LAN-1) (STREAM HEIGHT: 3 m)
4,76mm x 3,18mm 5,16mm x 3,18mm
Rad. Flow Flow Rad. Flow Flow
BARS (m) (m3/h) (lps) (m) (m3/h) (lps)
5,56mm x 3,18mm
Rad. Flow Flow
(m) (m3/h) (lps)
5,95mm x 3,18mm
Rad. Flow Flow
(m) (m3/h) (lps)
6,35mm x 3,18mm
Rad. Flow Flow
(m) (m3/h) (lps)
6,75mm x 3,18mm 7,14mm x 3,18mm
Rad. Flow Flow Rad. Flow Flow
(m) (m3/h) (lps) (m) (m3/h) (lps)
2,5
3,0
3,5
4,0
4,5
5,0
5,5
17,00
17,40
17,90
18,30
18,80
19,00
19,40
17,20
17,80
18,40
18,90
19,40
19,70
20,10
17,50
18,30
18,90
19,50
20,00
20,40
21,00
17,70
18,60
19,30
20,10
20,70
21,30
-
15,60
16,10
16,40
16,70
16,90
17,10
17,40
2,01
2,21
2,38
2,54
2,71
2,86
3,00
0,56
0,61
0,66
0,71
0,75
0,79
0,83
16,20
16,70
17,10
17,40
17,70
17,90
18,30
2,26
2,48
2,68
2,86
3,03
3,19
3,36
0,63
0,69
0,74
0,79
0,84
0,89
0,93
2,52
2,77
3,00
3,19
3,39
3,56
3,75
0,70
0,77
0,83
0,89
0,94
0,99
1,04
2,66
2,93
3,15
3,37
3,57
3,77
3,97
0,74
0,81
0,88
0,93
0,99
1,05
1,10
2,94
3,22
3,50
3,74
3,96
4,18
4,38
0,82
0,90
0,97
1,04
1,10
1,16
1,22
3,25
3,56
3,85
4,11
4,37
4,62
-
0,90
0,99
1,07
1,14
1,21
1,28
-
17,70
18,70
19,60
20,50
21,20
22,10
-
3,58
3,92
4,23
4,51
4,80
5,05
-
0,99
1,09
1,18
1,25
1,33
1,40
-
124
Impacts
www.rainbird.com
2005 – 2006 Catalog
Spray Heads
Rotary
Nozzles
™
™
Rotors
Install Confidence.
Install Rain Bird Valves.
®
®
Impacts
Valves
Controllers
Valves
Central
Controls
Pump Stations
Xerigation®
Accessories
Resources
& Training
Reference
Valves
Major Products
DV
DVF
JTV
ASVF
PGA
PEB
PESB
GB
3
1"
1"
3
EFB-CP
BPE
BPES
200PRV
QC
Sizes
⁄4", 1"
⁄4", 1"
1", 11⁄2", 2"
1", 11⁄2", 2"
1", 11⁄2", 2"
1", 11⁄4", 11⁄2", 2" 1", 11⁄4", 11⁄2", 2" 3"
3"
2"
3
0.25–30 (1")
0.2–22 ( 3⁄4")
0.2–40 ( 1")
2–150
0.25–200
0.25–200
5–200
5–200
60–300
60–300
up to 120
10–125
0,23–6,81 (1")
0,05–5,0 ( 3⁄4")
0,05–9,08 ( 1")
0,45–34,05
0,06–45,40
0,06–45,40
1,14–45,40
1,14–45,40
13,62–68,10
13,62–68,10
up to 27,3
3–28
0,01–2,52
0,06–1,89 (1")
0,01–1,39 ( 3⁄4")
0,01–2,52 ( 1")
0,13–9,45
0,02–12,60
0,02–12,60
0,32–12,60
0,32–12,60
3,78–18,90
3,78–18,90
up to 7,61
0,83–7,78
15–150
15–150
15–150
15–150
20–200
20–200
15–200
15–200
20–200
20–200
up to 200
5–125
1,03–10,34
1,03–10,34
1,03–10,34
1,03–10,34
1,38–13,80
1,38–13,80
1,04–13,80
1,04–13,80
1,38–13,80
1,38–13,80
up to 13,8
0,4–8,6
I/E
I/E
I/E
I
I/E
I/E
I/E
I/E
I/E
I/E
I/E
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
5–150
1,14–34,05
0,32–9,45
5–200
1,14–45,40
0,32–12,60
5–200
1,14–45,40
0,32–12,60
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
(GPM)
0.2–22 ( 3⁄4")
0.2–40 ( 1")
0.2–40
(m3/h)
0,05–5,0 ( 3⁄4")
0,05–9,08 ( 1")
0,05–9,08
(l/s)
0,01–1,39 ( 3⁄4")
0,01–2,52 ( 1")
(psi)
15–150
(bars)
1,03–10,34
Flow
Pressure
Manual Bleed
I/E
•
Flow Control
Bottom Inlet
DV-A
DVF-A
Low Flow
•
•
PRS-D
(GPM)
(m3/h)
(l/s)
Dirty Water
Non-Potable Water
Sites Requiring Brass
Sites Requiring Plastic
•
•
•
•
*DV/DVF available in globe, angle, slip x slip, male x male and male x barb configurations.
126
Valves
** Flows below 3 GPM (0,68 m3/h; 0,19 l/s) install RBY filter upstream.
www.rainbird.com
⁄4", 1", 11⁄2"
•
•
•
I/E = Internal/External *
2005 – 2006 Catalog
Valves
Electric Remote-Control Valves
DV Series
3⁄ 4",
1" (20/27, 26/34)
Primary Application
Economical irrigation valve for residential and light commercial
applications.
Features
• Double-filtered pilot-flow design for maximum reliability.
• Balanced-pressure diaphragm for long life.
• External bleed to manually flush system of dirt and debris during
installation and system start-up.
• Internal bleed for spray-free manual operation.
• Energy-efficient, low-power encapsulated solenoid with captured
plunger and 90 mesh (200 micron) solenoid filter.
• Buna-N diaphragm with self-cleaning 90 mesh (200 micron) pilot
water filter and captive spring.
• Operates in low-flow and Xerigation ® applications when the
RBY filter is installed upstream.
• 1 1⁄4" (3,2 cm) stainless steel phillips head screws.
• Slip-by-slip configuration for low-cost, solvent-weld installations.
• Male by male configuration for quick and easy manifolding.
• Male by barb configuration for installation with poly pipe.
• Angle configuration for flexible installations especially when
submains are deep.
• Accepts latching solenoid for use with Rain Bird battery-operated
controllers.
• Optional conduit cover (DV-DUIT) available (see page 162)
Dimensions
• Height: 4 1⁄ 2" (11,4 cm)
• Height (Angle): 51⁄ 2" (14 cm)
• Length: 4 3⁄ 8" (11,1 cm)
Length (Angle): 3 3⁄ 4" (9,5 cm)
Length (MM): 5 3⁄ 8" (13,6 cm)
Length (MB): 5 3⁄ 4" (14,6 cm)
• Width: 3 1⁄ 3" (8,4 cm)
Models
• 075-DV: 3⁄ 4" (20/27)
• 100-DV: 1" (26/34)*
• 100-DV-SS: 1" (26/34)
• 100-DV-A: 1" (26/34)*
• 100-DV-MM: 1" (26/34)*
• 100-DV-MB: 1" (26/34)
• 125-DV-MB: 1" (26/34)M x 1 1⁄4" (33/42)B
New
* Available with BSP threads
1: Rain Bird recommends flow rates in the
supply line not to exceed 7.5 ft./sec.
(2,3 m/s) in order to reduce the effects of
water hammer.
2: DV Series valves cannot be used with
PRS pressure regulating modules.
Operating Range
• 075-DV Flow: 0.2 to 22 GPM (0,05 to 5,0 m3⁄h; 0,01 to 1,39 l/s).
For flows below 3 GPM (0,68 m3⁄h; 0,19 l/s) or any Xerigation
application, use RBY-075-200MX filter installed upstream.
• 100-DV Flow: 0.2 to 40 GPM (0,05 to 9,08 m3⁄h; 0,01 to 2,52 l/s).
For flows below 3 GPM (0,68 m3⁄h; 0,19 l/s) or any Xerigation ®
application, use RBY-100-200MX Filter installed upstream.
• Water temperature: Up to 110° F (43° C)
• Ambient temperature: Up to 125° F (52° C)
®
100-DV-SS
100- DVF- MB
How to Specify
Electrical Specifications
• 24 VAC 50/60 Hz (cycles/sec.) solenoid
• Inrush current: 0.30 A (7.2 VA) at 60 Hz
• Holding current: 0.19 A (4.6 VA) at 60 Hz
• Coil resistance: 42-55 Ohms
Optional Configuration:
MB- Male x Barb
MM- Male x Male
A- Angle
SS- Slip x Slip
F: Flow control
Model
DV: Remote Control Valve
ASV: Anti-siphon valve
Size
075: 3/4 " (20/27)
100: 1" (26/34)
This specifies a 100-DVF valve;
1" (26/34) male x barb with flow control.
Note: For non-U.S. applications it is
necessary to specify NPT or BSP thread
type (1" only).
100-DV-A
2005 – 2006 Catalog
www.rainbird.com
Valves
127
Valves
DVF Series
1" (26/34)
Primary Application
Economical irrigation valve for residential and light commercial
applications where flow control is required.
Features
• Incorporates all features of DV Series valves, plus the following:
• Unique, easy-to-turn, patented pressure assisted flow control
mechanism.
Operating Range
• 100-DVF Flow: 0.2 to 40 GPM (0,05 to 9,08 m3⁄h; 0,01 to 2,52 l/s).
products applications, use RBY-100-200MX Filter installed
upstream.
• Water temperature: up to 110° F (43° C)
100-DVF-MB
DVF Cutaway
Dimensions
• Height: 5 3⁄ 5" (14,2 cm)
• Height (Angle): 6.1" (15.5 cm)
• Length: 4 3⁄ 8" (11,1 cm)
Length (Angle): 3 3⁄ 4" (9,5 cm)
Length (MM): 5 3⁄ 8" (13,6 cm)
Length (MB): 5 3⁄ 4" (14,6 cm)
• Width: 3 1⁄ 3" (8,4 cm)
Models
•100-DVF: 1" (26/34)*
• 100-DVF-SS: 1" (26/34)
• 100-DVF-A: 1" (26/34)
• 100-DVF-MM: 1" (26/34)*
• 100-DVF-MB: 1" (26/34)
• 125-DVF-MB: 1" (26/34)M x 1 1⁄4" (33/42)B
* Available with BSP threads.
100-DVF-MM
128
100-DVF-A
Valves
1: Rain Bird recommends flow rates in the supply line not to exceed
7.5 ft./sec. (2,3 m/s) in order to reduce the effects of water hammer.
2: DVF Series valves cannot be used with PRS pressure regulating modules.
www.rainbird.com
2005 – 2006 Catalog
Valves
DV and DVF Valve Pressure Loss
METRIC
Pressure Loss (bars)
Pressure Loss (psi)
Flow
GPM
075-DV
3/4"
psi
100-DV/100-DVF
1"
psi
Flow
m3⁄h
1
3
5
10
20
30
40
2.5
2.5
2.9
3.8
5.1
-
2.2
2.2
2.4
2.7
4.2
6.1
9.3
0,23
0,68
1,14
2,27
4,54
6,81
9,08
l/s
075-DV
3/4"
bars
100-DV/100-DVF
1"
bars
0,06
0,19
0,32
0,63
1,26
1,89
2,52
0,17
0,17
0,20
0,26
0,35
-
0,15
0,15
0,17
0,19
0,29
0,42
0,64
100-DV / DVF Angle, Male x Barb, and Male x Male Valve Pressure Loss
METRIC
Pressure Loss (bars)
Pressure Loss (psi)
Flow
GPM
Angle
1"
psi
Male x Barb
1"
psi
Male x Barb
1 1⁄4"
psi
Male x Male
1"
psi
Flow
m3/h l/s
Angle
1"
bars
Male x Barb Male x Barb Male x Male
1"
1 1⁄4"
1"
bars
bars
bars
1
3
5
10
20
30
40
1.6
1.6
1.8
2.3
3.6
5.5
9.1
2.2
2.2
2.4
2.7
5.2
10.5
18.5
1.3
1.3
1.5
2.7
5.2
8.6
14.2
2.2
2.2
2.4
2.7
4.6
8.2
14.1
0,23
0,68
1,14
2,27
4,54
6,81
9,08
0,11
0,11
0,12
0,16
0,25
0,38
0,63
0,15
0,15
0,17
0,19
0,36
0,72
1,28
0,06
0,19
0,32
0,63
1,26
1,89
2,52
0,09
0,09
0,10
0,19
0,36
0,59
0,98
0,15
0,15
0,17
0,19
0,32
0,57
0,97
Note: See Xerigation section for RBY Filter flow loss data.
Note: DV/DVF Male x Male and Male x Barb not recommended for flows
exceeding 30 GPM (6,81 m3/h, 1,89 l/s).
2005 – 2006 Catalog
www.rainbird.com
Valves
129
Valves
ASVF Series
3⁄ 4",
1" (20/27, 26/34)
Primary Application
Economical irrigation valve and atmospheric backflow preventer
for residential and light commercial applications.
Features
• Combination reliable DVF valve and atmospheric backflow
preventer in one unit
• Incorporates all features of DV and DVF Series valves,
• I.A.P.M.O. and A.S.S.E listing approved
• City of Los Angeles listing approved
• Canadian Standards Association listing approved
ASVF Cutaway
Operating Range
• 075-ASVF Flow: 0.2 to 22 GPM (0,05 to 5,0 m3⁄h; 0,01 to 1,39 l/s).
products application, use RBY-075-200MX filter installed upstream.
• 100-ASVF Flow: 0.2 to 40 GPM (0,05 to 9,08 m3⁄h; 0,01 to 2,52 l/s).
products application, use RBY-100-200MX filter installed upstream.
100-ASVF
130
Valves
www.rainbird.com
2005 – 2006 Catalog
Valves
ASVF Valve Pressure Loss
Specifications
• Anti-siphon must be installed at least 6" (15,2 cm) above the
highest point of water in the pipe and sprinklers it serves.
• No valve can be located downstream of the anti-siphon valve.
• UPC Sec. 1003 (2)
• Anti-siphon valves must not be operated continuously for more
than twelve (12) hours.
• Consult local codes.
Dimensions
• Height: 6 1⁄ 4" (15,8 cm)
• Length: 6 1⁄ 10" (15,5 cm)
• Width: 3 1⁄ 5 " (8,1 cm)
Models
• 075-ASVF: 3⁄ 4" (20/27)
• 100-ASVF: 1" (26/34)
Models available in NPT threads only.
Flow
GPM
075-ASVF
3/4" psi
100-ASVF
1" psi
1
3.6
3.1
3
3.6
3.1
5
4.2
4.0
10
5.7
5.4
20
8.6
7.3
30
-
10.3
40
-
15.9
METRIC
Flow
m3⁄h
l/s
075-ASVF
3/4" bars
100-ASVF
1" bars
0,23
0,06
0,25
0,21
0,68
0,19
0,25
0,21
1,14
0,32
0,29
0,28
2,27
0,63
0,39
0,37
4,54
1,26
0,59
0,50
6,81
1,89
-
0,71
9,08
2,52
-
1,10
* See Xerigation section for RBY Filter flow loss data. Rain Bird
recommends flow rates in the supply line not to exceed 7.5 ft./sec.
(2,3 m/s) in order to reduce the effects of water hammer.
2005 – 2006 Catalog
www.rainbird.com
Valves
131
Valves
100DVUU, 100DVFUU, 100DVUB, 100DVFUB
Primary Application
The DV/DVF valve product family has just expanded to include the
new line of Union Valves. These new DV/DVF valves combine
reliability with the convenience of half union fittings. Use these new
valves for quick and easy assembly and disassembly of valve
manifolds. Available NOW in both 1" union and barb configurations.
Please refer to page 127 and 128 of this catalog for the complete
description.
Features
DV SERIES
• 1" Union-by-Union (UU) female union thread configuration for quick
and easy manifolding
• 1" Union-by-Barb (UB) female union thread inlet by barb outlet
configuration for quick and easy manifolding for use with poly pipe
Operating Range
• 100-DV/DVF (union) Flow: 0.2 to 20 GPM (0,05 to 4,54 m 3/h, 0,01
to 1,26 l/s); for flows below 3 GPM (0,68 m 3/h; 0,19 l/s) or any
Xerigation ® application, use RBY-100-200MX filter installed
upstream
100-DV-UU
• 24 VAC 50/60 Hz (cycles per second)
solenoid power requirement
• 0.30 A (7.2 VA) inrush current
• 0.23 A (5.5 VA) holding current
• Solenoid coil resistance: 38 Ohms
100- DVF- MB
Optional Configuration:
UU: Union x Union
UB: Union x Barb
Optional Feature
F: Flow Control
Note: For non-U.S. applications it
is necessary to specify NPT or BSP
thread type.
How to Specify
Model
DV: Remote Control Valve
Size
100: 1" (26/34)
100-DVF-UB
132
Valves
www.rainbird.com
2005 – 2006 Catalog
Valves
Union x Union and Union x Barb Valve Pressure Loss
Dimensions
DV SERIES
• Height: 4 1⁄ 2" (11,4 cm)
• Length: (UU) 5 7⁄ 8" (14,9 cm)
• Width: 3 1⁄ 3" (8,4 cm)
DVF SERIES
• Height: 5 3⁄ 5" (14,2 cm)
• Length: (UU) 5 7⁄ 8" (14,9 cm)
• Width: 3 1⁄ 3" (8,4 cm)
Models
• 100-DV-UU: 1" (26/34)*
• 100-DV-UB: 1" (26/34)
• 100-DVF-UU: 1" (26/34)*
• 100-DVF-UB: 1" (26/34)
*Available with BSP threads
(UB) 6" (15,2 cm)
(UB) 6" (15,2 cm)
Flow
(GPM)
1
3
5
10
20
Union x Union
1" (psi)
2.3
2.9
3.1
3.9
7.5
Union x Barb
1" (psi)
2.0
2.3
2.9
3.7
6.6
Union x Union
1" (bars)
0,16
0,20
0,21
0,27
0,52
Union x Barb
1" (bars)
0,14
0,16
0,20
0,26
0,46
METRIC
Flow
(m 3/h)
0,23
0,68
1,14
2,27
4,54
DV/DVF Union x Union and Union x Barb not recommended for flows exceeding
20 GPM (4,54 m3/h; 1,26 l/s).
2005 – 2006 Catalog
www.rainbird.com
Valves
133
Valves
Versatility, Value, Convenience
Jar Top Valve Series
1" (26/34)
Primary Application
The Rain Bird Jar Top Valve (JTV) provides versatility, reliability,
affordability and ease of service for residential and light commercial
applications. The threaded bonnet design allows for tool-free access
and maintenance, eliminating the need to remove and replace
multiple screws.
Features
• Double-filtered pilot flow for maximum reliability
• Balanced-pressure diaphragm for long life
• Buna-N diaphragm with self-cleaning 90-mesh (200 micron)
pilot water filter and stainless steel spring
• Energy efficient, low-power encapsulated solenoid with
captured plunger
100-JTV
Versatility
• Operates in low-flow and Xerigation® applications when the
RBY filter is installed upstream
• Accepts latching solenoid for use with Rain Bird batteryoperated controllers
• Available in 1" (26/34) globe configuration with female NPT and BSP
threads
• Available in 1" (26/34) Slip x Slip (SS) configuration for low cost, solvent-weld installations
installation and system start up
• Internal bleed for spray-free manual operation
Ease of Service
• Threaded bonnet provides easy removal with no screws
• Trouble-free service with few parts
• Drop-in diaphragm for effortless maintenance
100- JTV- SS
Optional
Configuration:
SS: Slip x Slip
Note: For non-U.S. applications it
is necessary to specify NPT or BSP
thread type.
How to Specify
Model
JTV: Jar Top Valve
134
Valves
Size
100: 1" (26/34)
www.rainbird.com
2005 – 2006 Catalog
Valves
Jar Top Valve Pressure Loss
Operating Range
• Flow: 0.25 to 30 GPM (0,06 to 6,81 m3/h; 0,02 to 1,89 l/s); for
flows below 3 GPM (0,68 m3/h; 0,19 l/s) or any Xerigation
application, use RBY-100-200MX filter installed upstream
• Operating Temperatures: Water temperature up to 110° F (43° C);
ambient temperature up to 125° F (52° C)
Dimensions
• Height: 5"
• Length: 4"
• Width: 3 1/8"
Models
• 100-JTV: 1" (26/34) Female Threaded Inlet and Outlet*
• 100-JTV-SS: 1" (26/34) Slip x Slip
* BSP threads available; specify when ordering
2005 – 2006 Catalog
Flow
(GPM)
1
3
5
10
15
20
30
(psi)
2.5
2.8
3.1
4.1
5.3
6.2
9.3
METRIC
Flow
(m 3/h)
0,23
0,68
1,14
2,27
3,41
4,54
6,81
www.rainbird.com
l/s
0,06
0,19
0,32
0,63
0,95
1,26
1,89
bars
0,17
0,19
0,21
0,28
0,37
0,43
0,64
Valves
135
Valves
PGA Series
1", 1 1⁄ 2", 2" (26/34, 40/49, 50/60)
Primary Application
Plastic globe/angle valve for residential/light commercial
applications. The PGA Series offers versatility at an affordable price.
Features
• Rugged PVC construction for reliable operation.
• Globe and angle configuration for flexibility in design and installation.
• Fabric-reinforced diaphragm for longer life.
• Slow closing to prevent water hammer and subsequent system
damage.
• One-piece solenoid with captured plunger and spring for easy
servicing. Prevents loss of parts during field service.
• Non-rising flow control handle adjusts water flow as needed.
• Manual internal bleed operates the valve without allowing water into
the valve box. Allows pressure regulator adjustment without turning
on the valve at the controller.
• Double filtered pilot flow prevents clogging solenoid ports.
• External bleed is not available.
• Normally closed, forward flow design.
PGA Cutaway
Options (order separately)
• Accommodates field installed PRS-D pressure regulating module to
ensure optimum sprinkler performance. Regulates up to 100 psi
(6,90 bars).
• Purple flow control handles for easy identification of non-potable
water systems.
PGA-NP-HAN (1" and 11⁄2")
PGA-NP-HAN2 (2")
• Latching solenoid for use with Rain Bird battery-operated controllers
up to 150 psi (10,35 bars).
Operating Range
• PRS-D regulates up to 100 psi (6,90 bars)
• Flow: 2 to150 GPM (0,45 to 34,05 m3/h; 0,13 to 9,45 l/s)
• Flow with PRS-D: 5 to 150 GPM (1,14 to 34,05 m3/h; 0,32 to 9,45
l/s)
• Water temperature: up to 110° F (43° C) - refer to chart
• Ambient temperature: up to 125° F (52° C)
100 - PGA - PRS-D
Size
11/2 " (40/49)
Optional
PRS-D pressure
regulating module
Note: Valve and PRS-D module must be ordered
separately. For non-U.S. applications, it is
necessary to specify NPT or BSP thread type.
How to Specify
Model
PGA
150-PGA-NP-HAN
136
Valves
• Inrush current: 0.41 A (9.84 VA) at 60Hz
• Holding current: 0.28 A (6.72 VA) at 60Hz
•Coil resistance: 23-39 Ohms
www.rainbird.com
2005 – 2006 Catalog
Valves
PGA Series Valve Pressure Loss
(psi)
Models
• 100-PGA
• 150-PGA
• 200-PGA
1" (26/34)
11⁄2" (40/49)
2" (50/60)
BSP threads available; specify when ordering.
Dimensions
Height
• 100-PGA
7 1⁄ 4" (18,4 cm)
• 150-PGA
8" (20,3 cm)
• 200-PGA: 10" (25,4 cm)
Length
5 1⁄ 2" (14,0 cm)
6 3⁄ 4" (17,2 cm)
7 3⁄ 4" (23,5 cm)
Width
3 1⁄ 4" (8,3 cm)
3 1⁄ 2" (8,9 cm)
5" (12,7 cm)
Note: PRS-D adds 2" (5,1 cm) to valve height.
Flow
GPM
100PGA
Globe
1"
100PGA
Angle
1"
150PGA
Globe
11⁄ 2"
150PGA
Angle
11⁄ 2"
200PGA
Globe
2"
200PGA
Angle
2"
2
5
10
20
30
40
50
75
100
125
150
4.1
4.9
5.8
5.3
5.0
8.5
-
4.1
4.6
5.1
4.5
4.5
7.4
-
2.1
2.8
4.8
11.1
18.8
-
1.6
2.2
2.9
7.4
12.7
-
-
-
1.9
2.0
2.7
4.6
8.1
11.5
2.0
1.6
1.9
3.4
5.1
7.3
Recommendations
1. Rain Bird recommends flow rates in the supply line not to exceed 7.5 ft./sec.
2. For flows below 5 GPM (1,14 m3⁄h; 0,32 l/s), Rain Bird recommends use of
upstream filtration to prevent debris from collecting below the diaphragm.
METRIC
(bars)
Flow
m3⁄h
Flow
I/s
100PGA
Globe
1"
100PGA
Angle
1"
150PGA
Globe
11⁄ 2"
150PGA
Angle
11⁄ 2"
200PGA
Globe
2"
200PGA
Angle
2"
0,5
1
2
3
4
5
6
7
8
9
10
12
14
16
22
28
34
0,14
0,28
0,56
0,83
1,11
1,39
1,67
1,94
2,22
2,50
2,78
3,33
3,89
4,40
6,10
7,80
9,44
0,29
0,32
0,38
0,39
0,38
0,36
0,35
0,37
0,47
0,57
-
0,28
0,31
0,34
0,34
0,32
0,31
0,31
0,32
0,41
0,50
-
0,15
0,17
0,19
0,25
0,38
0,54
0,69
1,23
-
0,11
0,13
0,15
0,17
0,24
0,35
0,46
0,83
-
0,14
0,16
0,18
0,30
0,54
0,79
0,11
0,12
0,13
0,22
0,34
0,50
3. For flows below 10 GPM (2,27 m3⁄h; 0,63 l/s) Rain Bird recommends the flow
control stem be turned down two full turns from the fully open position.
PGA Series Temperature Rating
Water Temperature
Continuous Pressure
73˚ F
80˚ F
90˚ F
100˚ F
110˚ F
150 psi
132 psi
112 psi
93 psi
75 psi
METRIC
Water Temperature
Continuous Pressure
23˚ C
27˚ C
32˚ C
38˚ C
43˚ C
10,40 bars
9,10 bars
7,70 bars
6,40 bars
5,20 bars
Notes
1. Loss values are with flow control fully open.
2. PRS-D recommended for use in shaded area only.
2005 – 2006 Catalog
www.rainbird.com
Valves
137
Valves
PEB and PESB Series
1", 1 1⁄ 2", 2" (26/34, 40/49, 50/60)
Primary Application
Industrial-strength glass-filled nylon globe valves for commercial
applications. The PEB and PESB series are our most durable plastic
valves.
Features
• Durable glass-filled nylon construction for long life and reliable
performance.
• Stainless steel studs molded into the body resist thread damage.
damage.
• Flow control handle adjusts water flow as needed.
• Manual internal bleed operates the valve without allowing water
into the valve box. Allows pressure regulator adjustment without
turning on the valve at the controller.
• Manual external bleed permits flushing debris from the system.
Recommended for system start up and after repairs.
• Low flow operating capability for a wide range of applications.
• Globe configuration.
• Plastic scrubber on the PESB valve scrapes the stainless steel
screen to clean and break down grit and plant material. Prevents
debris build-up and clogging.
PEB Cutaway
PESB Cutaway
Model
PEB
Size
1" (26/34)
Optional
PRS-D pressure
regulating module
How to Specify
100- PEB- PRS-D
(6,90 bars).
• Purple flow control handles for easy identification of non-potable
water systems.
PEB-NP-HAN1(1")
PEB-NP-HAN2 (11⁄2" and 2")
• Latching solenoid for use with Rain Bird battery-operated
controllers up to 150 psi (10,35 bars).
150-PEB-NP-HAN
138
Valves
www.rainbird.com
2005 – 2006 Catalog
Valves
PEB and PESB Series Valve Pressure Loss
(psi)
Operating Range
• Flow: 0.25 to 200 GPM (0,06 to 45,40 m3⁄h; 0,02 to 12,60 l/s)
• Flow with PRS-D: 5 to 200 GPM (1,14 to 45,40 m3⁄h;
0,32 to 12,60 l/s)
Dimensions
Height
• 100:
6 1⁄ 2" (16,5 cm)
• 150:
8" (20,3 cm)
• 200:
8" (20,3 cm)
Length
4" (10,2 cm)
6" (15,2 cm)
6" (15,2 cm)
1" (26/34)
11⁄2" (40/49)
2" (50/60)
Recommendations
100-PEB
1"
150-PEB
11⁄ 2"
200-PEB
2"
0.25
0.5
1
5
10
20
30
40
50
75
100
125
150
175
200
0.8
1.0
1.3
1.7
1.8
2.9
5.6
10.0
15.6
-
4.0
3.6
2.7
2.4
4.2
8.5
14.6
21.2
-
3.1
2.9
3.9
6.8
10.0
13.6
17.5
METRIC (bars)
Width
4" (10,2 cm)
6" (15,2 cm)
6" (15,2 cm)
Note: The PRS-D option adds 2" (5,1 cm) to valve height.
Models
• 100PEB and 100PESB
Flow
GPM
Flow
m3⁄h
Flow
l/s
100-PEB
1"
150-PEB
11⁄ 2"
0,06
1
2
3
4
5
6
7
8
9
10
12
14
16
22
28
34
40
45
0,02
0,28
0,56
0,83
1,11
1,39
1,67
1,94
2,22
2,50
2,78
3,33
3,89
4,44
6,11
7,78
9,45
11,11
12,50
0,05
0,11
0,12
0,15
0,18
0,24
0,32
0,41
0,54
0,68
0,84
-
0,27
0,26
0,24
0,21
0,19
0,18
0,18
0,22
0,26
0,55
0,98
1,46
-
200-PEB
2"
0,21
0,21
0,20
0,26
0,46
0,69
0,95
1,18
Notes
2. PRS-D recommended for use in shaded area only.
2005 – 2006 Catalog
www.rainbird.com
Valves
139
Valves
GB Series
1", 1 1⁄ 4", 1 1⁄ 2", 2" (26/34, 33/42, 40/49, 50/60)
Primary Application
Durable brass valve performance in commercial applications. The
GB series embodies classic hardware, classic performance.
Features
• Red brass construction for longer life and more rugged
performance.
• Normally closed, reverse flow design ensures valve will fail in the
closed position if a tear or rip in the diaphragm occurs. Prevents
flooding, water waste and landscape damage.
damage.
turning on the controller.
Recommended for system start up and other repairs.
GB Cutaway
(6,90 bars).
• Purple flow control handle for easy identification of
non-potable water systems. (EFB-GB-NP-HAN)
Model
GB
Size
1" (26/34)
Optional
PRS-D pressure
regulating module
separately.
140
How to Specify
100- GB- PRS-D
Valves
150-GB-NP-HAN
www.rainbird.com
2005 – 2006 Catalog
Valves
GB Series Valve Pressure Loss
(psi)
Operating Range
• Flow with/without PRS-D: 5 to 200 GPM (1,14 to 45,40 m3/h;
0,32 to 12,60 l/s)
Dimensions
Height
• 100-GB: 6" (15,2 cm)
• 125-GB: 5 3⁄ 4" (14,6 cm)
• 150-GB: 6 1⁄ 2" (16,5 cm)
• 200-GB: 7" (17,8 cm)
Length
4 1⁄ 2" (11,4 cm)
5" (12,7 cm)
5 1⁄ 2" (14 cm)
6 3⁄ 4" (17,1 cm)
Width
2 1⁄ 4" (5,7 cm)
3" (7,6 cm)
4" (10, 2 cm)
5 1⁄ 4” (13,3 cm)
Note: The PRS-D option adds 2" (5,1 cm) to the valve height.
Models
• 100-GB:
• 125-GB:
• 150-GB:
• 200-GB:
1" (26/34)
11⁄ 4"(33/42)
11⁄ 2"(40/49)
2" (50/60)
BSP threads unavailable.
Recommendations
Flow
GPM
100-GB
1"
125-GB
11⁄ 4"
150-GB
11⁄ 2"
200-GB
2"
5
10
15
20
30
40
50
60
80
100
120
140
160
180
200
2.1
2.6
3.1
4.0
5.7
9.8
15.4
-
2.4
2.7
5.0
7.6
10.7
18.7
-
3.1
3.4
3.3
3.3
4.6
7.4
11.0
16.6
24.0
-
1.2
1.4
1.4
1.5
1.7
2.6
3.7
5.9
7.9
10.9
13.1
16.8
METRIC (bars)
Flow
m3⁄h
Flow
l/s
100-GB
1"
125-GB
11⁄ 2"
150-GB
11⁄ 2"
200-GB
2"
1
2
3
4
5
6
7
8
9
10
12
14
16
22
28
34
40
45
0,28
0,56
0,83
1,11
1,39
1,67
1,94
2,22
2,50
2,78
3,33
3,89
4,44
6,11
7,78
9,45
11,11
12,50
0,13
0,17
0,20
0,24
0,30
0,35
0,42
0,54
0,66
0,83
1,17
-
0,17
0,18
0,20
0,27
0,34
0,42
0,59
0,78
1,02
-
0,22
0,23
0,24
0,23
0,23
0,23
0,25
0,33
0,42
0,72
1,23
-
0,09
0,09
0,10
0,10
0,10
0,10
0,11
0,13
0,15
0,25
0,43
0,64
0,87
1,14
Notes
2005 – 2006 Catalog
www.rainbird.com
Valves
141
Valves
EFB-CP Series
1", 1 1⁄ 4", 1 1⁄ 2", 2" (26/34, 33/42, 40/49, 50/60)
Primary Application
Durable brass valve with a contamination-proof, self-flushing
screen for reliable performance in commercial dirty water
applications. The EFB-CP series embodies classic hardware,
classic performance.
Features
• Red brass construction for longer life and more rugged
performance.
• Normally closed, reverse flow design ensures valve will fail in the
closed position if a tear or rip in the diaphragm occurs. Prevents
flooding, water waste and landscape damage.
damage.
turning on the controller.
Recommended for system start up and other repairs.
• Contamination-proof, self-flushing filter screen resists debris
build-up. Water flow continuously flushes the screen, dislodging
particles and debris before they can accumulate and clog the filter.
EFB-CP Cutaway
(6,90 bars).
• Purple flow control handle for easy identification of
non-potable water systems. (EFB-GB-NP-HAN)
100- EFB-CP- PRS-D
Size
1" (26/34)
Optional
PRS-D pressure
regulating module
separately. For non-U.S. applications, it is necessary
to specify NPT or BSP thread type.
142
How to Specify
Model
EFB-CP
Valves
150-EFB-CP-NP-HAN
www.rainbird.com
2005 – 2006 Catalog
Valves
EFB-CP Series Valve Pressure Loss
(psi)
Operating Range
• Flow with/without PRS-D: 5 to 200 GPM (1,14 to 45,40 m3/h;
0,32 to 12,60 l/s)
Dimensions
• 100-EFB-CP:
• 125-EFB-CP:
• 150-EFB-CP:
• 200-EFB-CP:
Height
6" (15,2 cm)
5 3⁄ 4" (14,6 cm)
6 1⁄ 2" (16,5 cm)
7" (17,8 cm)
Length
4 1⁄ 2" (11,4 cm)
5" (12,7 cm)
5 1⁄ 2" (14 cm)
6 3⁄ 4" (17,1 cm)
Width
3 1⁄ 4" (8,3 cm)
3 1⁄ 4" (8,3 cm)
4 1⁄ 2" (11,4 cm)
5 3⁄ 4" (14,6 cm)
Note: The PRS-D option adds 2" (5,1 cm) to the valve height.
Models
• 100-EFB-CP:
1" (26/34)*
• 125-EFB-CP:
1 1⁄ 4" (33/42)
• 150-EFB-CP:
1 1⁄ 2" (40/49)*
• 200-EFB-CP:
2" (50/60)*
* BSP threads available; specify when ordering.
Recommendations
Flow 100
GPM EFB-CP
1"
125
EFB-CP
1 1⁄ 4"
150
EFB-CP
1 1⁄ 2"
200
EFB-CP
2"
5
10
15
20
30
40
50
60
80
100
120
140
160
180
200
2.5
2.9
4.8
7.8
11.2
19.8
-
2.8
3.7
3.3
3.9
5.1
8.4
12.2
18.5
-
1.2
1.4
1.4
1.3
1.6
2.7
3.6
5.7
7.5
10.7
13.1
16.3
2.7
3.5
4.3
6.2
10.6
12.5
19.3
-
METRIC (bars)
Flow
m3⁄h
Flow
l/s
100
EFB-CP
1"
125
EFB-CP
1 1⁄ 4"
150
EFB-CP
1 1⁄ 2"
200
EFB-CP
2"
1
2
3
4
5
6
7
8
9
10
12
14
16
22
28
34
40
45
0,28
0,56
0,83
1,11
1,39
1,67
1,94
2,22
2,50
2,78
3,33
3,89
4,44
6,11
7,78
9,45
11,11
12,50
0,18
0,23
0,28
0,37
0,49
0,62
0,74
0,80
0,86
1,05
1,46
-
0,18
0,19
0,21
0,27
0,33
0,42
0,60
0,82
1,08
1,08
-
0,21
0,23
0,25
0,24
0,23
0,25
0,29
0,37
0,47
0,47
0,80
1,36
-
0,08
0,09
0,09
0,09
0,10
0,10
0,10
0,12
0,15
0,24
0,42
0,63
0,87
1,10
Notes
2005 – 2006 Catalog
www.rainbird.com
Valves
143
Valves
300BPE and 300BPES Valves
3" (80/90)
Primary Application
Rain Bird’s 3" BPE and BPES valves are built tough to offer long
life and efficient, trouble-free performance - even under harsh
conditions. Featuring a unique combination construction of brass
body and glass-filled nylon bonnet, these valves are designed to
withstand extreme pressure surges, effluent water and clogging
debris. For additional protection, the BPES model is equipped with
a patented scrubber mechanism to actively fight dirt and particles.
Features
• Unique hybrid construction featuring durable red brass body and
glass-filled nylon bonnet for long life at a value price.
• Globe and angle configuration for flexibility in design and
installation.
damage.
• Robust solenoid provides dependable performance even during
constant operation.
• Flow control handle adjusts water flows as needed and
incorporates a brass thread insert for longer life.
turning the valve on at the controller.
Recommended for system start up and repairs.
• Highly efficient operation with extremely low pressure loss.
• BPES only: Patented nylon scrubber scrapes a stainless steel
screen to clean and break down grit and plant material. Prevents
debris build-up and clogging.
BPES Cutaway
• Accommodates field-installed PRS-D pressure regulating module to
(6,90 bars).
• Purple flow control handle for non-potable water
applications. (BPE-NP-HAN)
• Latching solenoid for use with Rain Bird battery-operated controllers up to 150 psi (10,35 bars).
300 - BPE - PRS-D
Size
3" (80/90)
Optional
PRS-D pressure
regulating module
144
How to Specify
Model
BPE
Valves
300-BPES
www.rainbird.com
2005 – 2006 Catalog
Valves
BPE & BPES 3" Valve Pressure Loss
Operating Range
• Flow with/without PRS-D: 60 to 300 GPM (13,62 to 68,10 m3⁄h;
3,78 to 18,90 l/s)
• Water temperature: up to 110°F (43°C)
• Ambient temperature: up to 140°F (60°C)
• Coil resistance: 28 Ohms, nominal
Dimensions
Size
Height
• 300
13 5⁄ 8" (34,61 cm)
Models
• 300BPE
• 300BPES
Length
8" (20,32 cm)
Width
7" (17,78 cm)
Flow
GPM
Globe
Angle
60
80
100
120
160
200
250
300
7.5
7.4
7.3
5.8
2.4
3.3
4.9
4.9
6.8
7.1
6.8
5.2
2.3
3.1
4.1
3.5
METRIC (bars)
3" (80/90)
3" (80/90)
Recommendations
(psi)
Flow
m3⁄ h
Flow
l/s
Globe
Angle
14
20
30
40
50
60
68
3,89
5,56
8,33
11,11
13,89
16,67
18,89
0,52
0,51
0,32
0,17
0,23
0,34
0,34
0,47
0,48
0,29
0,16
0,21
0,28
0,24
Notes
2005 – 2006 Catalog
www.rainbird.com
Valves
145
Valves
Pressure Regulating Module
PRS-Dial
Primary Application
The PRS-Dial is an excellent means of regulating outlet pressure
at the valve regardless of incoming pressure fluctuations. The visible scale makes installation quick and easy. The regulator fits all
Rain Bird PGA, PEB, PESB, GB, EFB-CP, BPE and BPES series
valves. The dial cartridge retrofits easily into existing PRS-B units.
PRS-D cutaway
150-PGA-PRS-D
150-PEB-PRS-D
Features
• Regulates and maintains constant outlet pressure between 15 and
100 psi (1,04 to 6,90 bars) within ±3 psi (±0,21 bars).
• Adjustment knob with detents permits fine-tune setting in 1⁄3 psi
(0,02 bar) increments.
• Dial cartridge makes installation and adjustment quick, easy and
accurate.
• Improved spike reduction capabilities reduce water hammer.
• Ergonomic design with snap-tight cover to prevent vandalism.
• Waterproof dial cartridge eliminates fogging and binding.
• Dial cartridge retrofits into all existing PRS-B units.
• Schrader valve connects pressure hose gauge, ordered separately.
• Easy field installation. PRS-Dial threads underneath the solenoid
and adapter.
• Corrosion-resistant glass-filled nylon for rugged performance.
Operating Range
• Pressure:
up to 100 psi (6,90 bars)*
• Regulation: 15 to 100 psi (1,04 to 6,90 bars)
• Accuracy:
±3 psi (±0,21 bar)
• Flow:
refer to chart
* While the PRS-Dial unit can withstand pressures up to 200 psi (13,80 bars), accurate pressure
regulation can be maintained only up to 100 psi (6,90 bars).
150-EFB-CP-PRS-D
300-BPE-PRS-D
PRS-D
146
Valves
www.rainbird.com
2005 – 2006 Catalog
Valves
PRS-D Valve Flow Range
These are the valve flow ranges. The PRS-Dial regulates only up to 100 psi (6,90 bars).
Models
• PRS-D
Application Information
• Proper operation requires inlet pressure to be a minimum of
15 psi (1,04 bars) higher than desired outlet pressure.
• For areas with very high pressure or uneven terrain, install
sprinklers with PRS pressure regulating stems and/or SAM check
valves.
• When inlet pressure exceeds 100 psi (6,90 bars), a pressure
regulating master valve or inline pressure regulator is
required.
• Rain Bird does not recommend using the pressure regulating
module for applications outside the recommended flow ranges.
• To reduce the effects of water hammer, Rain Bird recommends
flow rates in the supply line not to exceed 7.5 ft/sec (2,29 m/s).
• For flows below 5 GPM (1,14 m3/h; 0,32 l/s), Rain Bird
recommends the use of upstream filtration to prevent debris
from collecting below the valve diaphragm.
• For flows below 10 GPM (2,27 m3/h; 0,63 l/s), Rain Bird recommends the flow control stem be turned down two full turns from
the fully open position.
2005 – 2006 Catalog
Model
GPM
100PGA
150PGA
200PGA
100PEB
150PEB
200PEB
100PESB
150PESB
200PESB
100GB
125GB
150GB
200GB
100EFB-CP
125EFB-CP
150EFB-CP
200EFB-CP
300BPE
300BPES
5-40
30-100
40-150
5-50
50-150
75-200
5-50
50-150
75-200
5-50
20-80
20-140
20-200
5-50
20-80
20-140
20-200
60-300
60-300
METRIC (bars)
Model
m3⁄h
l/s
100PGA
150PGA
200PGA
100PEB
150PEB
200PEB
100PESB
150PESB
200PESB
100GB
125GB
150GB
200GB
100EFB-CP
125EFB-CP
150EFB-CP
200EFB-CP
300BPE
300BPES
1,14-9,08
6,81-22,70
9,08-34,05
1,14-11,35
11,35-34,05
17,03-45,40
1,14-11,35
11,35-34,05
17,03-45,40
1,14-11,35
4,54-18,16
4,54-31,78
4,54-45,40
1,14-11,35
4,54-18,16
4,54-31,78
4,54-45,40
13,62-68,10
13,62-68,10
0,32-2,52
1,89-6,30
2,52-9,45
0,32-3,15
3,15-9,45
4,73-12,60
0,32-3,15
3,15-9,45
4,73-12,60
0,32-3,15
1,26-5,04
1,26-8,82
1,26-12,60
0,32-3,15
1,26-5,04
1,26-8,82
1,26-12,60
3,78-18,90
3,78-18,90
www.rainbird.com
Valves
147
Valves
Quick-Coupling Valves
Primary Application
Industrial-strength brass quick-coupling valves for convenient water
access.
Features
• Red brass construction for long life and rugged performance.
• Yellow thermoplastic cover for durability. Optional locking cover
on models 33DLRC, 44LRC, and 5LRC (use 2049 key to unlock).
Metal cover on model 7 only.
• One-piece body design (models 3RC, 5RC, and 7).
• Two-piece body design for easy servicing (models 33DRC, 44LRC,
and 44RC).
• Strong corrosion-resistant stainless steel spring prevents leakage.
Quick-Coupling
Valve Cutaway
Operating Range
• Flow: 10 to 125 GPM (2,27 to 28,38 m3⁄h; 0,63 to 7,88 l/s)
Dimensions
• 3RC
Height: 4 1⁄ 4"
• 33DRC Height: 4 3⁄ 8"
• 33DLRC Height: 4 5⁄ 8"
• 44RC
Height: 6"
• 44LRC Height: 6"
• 5RC
Height: 5 1⁄ 2"
• 5LRC
Height: 5 1⁄ 2"
•7
Height: 5 3⁄ 4"
3 RC
Models
• 3RC:
• 33DRC:
(10,8 cm)
(11,1 cm)
(11,7 cm)
(15,2 cm)
(15,2 cm)
(14,0 cm)
(14,0 cm)
(14,6 cm)
3⁄ 4"
(20/27) Rubber Cover, 1-Piece Body
(20/27) Double Track Key Lug, Rubber Cover,
2-Piece Body
• 33DLRC: 3⁄ 4" (20/27) Double Track Key Lug, Locking Rubber Cover,
2-Piece Body
• 44RC:
1" (26/34) Rubber Cover, 2-Piece Body
• 44LRC:
1" (26/34) Locking Rubber Cover, 2-Piece Body
• 5RC:
1" (26/34) Rubber Cover, 1-Piece Body
• 5LRC:
1" (26/34) Locking Rubber Cover, 1-Piece Body
• 7:
11⁄ 2" (40/49) Metal Cover, 1-Piece Body
• 5RC-BSP: 1" (26/34) Rubber Cover, 1-Piece Body, BSP threaded
• 5LRC-BSP: 1" (26/34) Locking Rubber Cover, 1-Piece Body,
BSP threaded
33 DRC
7
3⁄ 4"
Note: For non-US applications, it is necessary to specify NPT or BSP thread type.
148
Valves
www.rainbird.com
2005 – 2006 Catalog
Valves
Non-Potable Quick-Coupling Valves
Primary Application
Industrial-strength brass quick-coupling valves for convenient water
access in non-potable systems.
Features
• Red brass construction for long life and rugged performance.
• Locking purple thermoplastic covers restrict tampering
(use 2049 key to unlock).
• Two-piece body design for easy servicing.
• Strong corrosion-resistant stainless steel spring prevents leakage.
• Covers marked with “Do Not Drink!” warnings in English and
Spanish.
Operating Range
• Flow: 10 to 70 GPM (2,27 to 15,89 m3⁄h; 0,63 to 4,41 l/s)
Dimensions
• 33DNP Height: 4 3⁄ 8" (11,1 cm)
• 44NP
Height: 6"
(15,2 cm)
1
• 5NP
Height: 5 ⁄ 2" (14,0 cm)
Models
• 33DNP: 3⁄ 4"
• 44NP: 1"
• 5NP:
1"
(20/27)
(26/34)
(26/34
Quick-Coupling Valves Pressure Loss
Pressure Loss (psi)
Flow
3RC
GPM
3
10
15
20
30
40
50
60
70
80
100
125
1.8
4.7
7.2
-
⁄ 4"
33 DRC
33 DNP
3
⁄ 4"
44 RC
44 NP
1"
5NP
7
1"
11⁄ 2"
2.0
4.3
7.6
-
2.2
4.4
11.5
-
4.1
7.3
11.0
15.7
21.5
-
1.7
2.5
3.6
4.9
8.4
14.0
METRIC (bars)
Flow
Flow
3RC
m3⁄h
l/s
3
3
4
5
6
7
8
9
10
12
14
16
22
28
0,83
1,11
1,39
1,67
1,94
2,22
2,50
2,78
3,33
3,89
4,44
6,11
7,78
0,25
0,42
-
⁄ 4"
33 DRC
33 DNP
3
⁄ 4"
44 RC
44 NP
1"
5NP
7
1"
11⁄ 2"
0,23
0,41
-
0,22
0,37
0,57
0,84
-
0,30
0,40
0,50
0,61
0,85
1,15
1,48
-
0,13
0,18
0,25
0,72
0,97
33-DNP
2005 – 2006 Catalog
www.rainbird.com
Valves
149
Valves
Valve Boxes
NEW
VB Series
Now You Can Judge A Valve Box By Its Cover
Primary Application
Protects in-ground irrigation valves. Also functions as a durable
enclosure that provides easy access to valves for maintenance.
Used in turf applications to house single valves, multiple valves, or
other subsurface components of an irrigation system.
Features
These features apply to the Standard, Jumbo, Super Jumbo,
Maxi Jumbo, 10" Round and 7" Round Series Valve Boxes:
• Easily removable knock-outs simplify pipe placement and reduce
installation time.
• Large top opening area provides unobstructed access to valves.
• Knock-out retainers align removed knock-outs in place above the
pipe to help keep dirt out during backfill.
• Corrugated sides provide strength both before and after knockouts are removed.
• Beveled lid edges help prevent damage to lids from lawn equipment.
• Interlocking bottoms allow boxes to mate securely together bottom-to-bottom for deep installations.
• Lid marking area provides dedicated location for valve
identification.
Additional Features
STANDARD RECTANGULAR SERIES (VB - STD)
• Two large center knock-outs accommodate up to 3 1⁄2" diameter
pipe and eleven knock-outs accommodate up to 2" diameter pipe.
(Extensions and shallow boxes do not have knock-outs.)
• Shovel access slot on the body allows for easy lid removal.
• Bolt hole knock-out in the lid keeps insects out of the box when
bolt is not used.
• Optional stainless steel bolt and clip securely fasten the lid to the
body.
• Available lid colors are green, purple (to indicate non-potable
water), tan (for desert soils), and black.
JUMBO RECTANGULAR SERIES (VB - JMB)
• Two large center knock-outs accommodate up to 3 1⁄2" diameter
pipe. (Extension does not have knock-outs.)
• Shovel access slot on the body allows for easy lid removal.
bolt is not used.
body.
• Wrench grip on lid makes it easier to remove the lid.
VB-JMB
150
Valves
www.rainbird.com
2005 – 2006 Catalog
Valves
SUPER JUMBO RECTANGULAR SERIES (VB - SPR)
• Fourteen knock-outs accommodate up to 3 1⁄2" diameter pipe.
• Shovel access slots on both ends of the body allow for easy lid
removal.
• Wrench grips on lids makes it easier to remove the lid.
• Includes two stainless steel bolts and clips to securely fasten the
lid to the body.
• Available lid colors are green and tan (for desert soils).
MAXI JUMBO RECTANGULAR SERIES (VB - MAX)
• Eighteen knock-outs accommodate up to 3 1⁄2" diameter pipe.
• Shovel access slots on both ends of the body allow for easy lid
removal.
• Wrench grips on lids makes it easier to remove the lid
• Includes two stainless steel bolts and clips to securely fasten the
lid to the body.
• Available lid colors are green and tan (for desert soils).
7" ROUND SERIES (VB - 7RND)
• Four equally spaced knock-outs accommodate up to 2" diameter
pipe.
• Two pre-molded side openings accommodate up to 2" diameter
pipe.
• Corrugated sides provide strength.
• Beveled lid edges help prevent damage to lids from lawn equipment.
• Lid snaps securely into place.
• Lid can be removed by inserting a finger or screwdriver in one of
four access slots.
• Available in green body and green lid only.
• Four equally spaced knock-outs accommodate up to 2" diameter
pipe. (Extension does not have knock-outs.)
bolt is not used.
body.
VB-STD
2005 – 2006 Catalog
VB-STD-6
www.rainbird.com
VB-10RND
VB-6RND
Valves
151
Valves
VB Series
Continued
Models and Dimensions
STANDARD RECTANGULAR SERIES
Standard box: 21.8" L x 16.6" W x 12.0" H (55,4 cm x 42,2 cm x
30,5 cm)
• VB - STD: Black body and green lid
• VB - STDP: Black body and purple lid
• VB - STDT: Black body and tan lid
• VB - STDBK: Black body and black lid
• VB - STD - B: Black body only
• VB - STD - L: Green lid
• VB - STDP - L: Purple lid
• VB - STDT - L: Tan lid
• VB - STDBK - L: Black lid
• VB - STD - H: Black body and green lid with locking hex bolt
• VB - STDP - H: Black body and purple lid with locking hex bolt
• VB - STDT - H: Black body and tan lid with locking hex bolt
• VB - STDBK - H: Black body and black lid with locking hex bolt
Valve Box Lids - green, tan (for desert soils),
purple (to indicate non-potable water), and black
152
Valves
Standard 3" extension: 19.6" L x 14.3" W x 3.75" H (49,8 cm x
36,3 cm x 9,5 cm)
• VB - STD - 3EXT - B: 3" standard extension black body only
• VB - STD - 3EXT: 3" standard extension black body and green lid
Standard 6" extension: 20.0" L x 14.75" W x 6.75" H (50,8 cm x
37,5 cm x 17,1 cm)
• VB - STD - 6EXT - B: 6" standard extension black body only
• VB - STD - 6EXT: 6" standard extension black body and green lid
Standard 6" box: 20.0" L x 14.75" W x 6.75" H (50,8 cm x
37,5 cm x 17,1 cm)
• VB - STD - 6B: 6" standard black body only
• VB - STD - 6: 6" standard black body and green lid
• VB - STDP - 6: 6" standard black body and purple lid
• VB - STDT - 6: 6" standard black body and tan lid
VB-JMBP-L
www.rainbird.com
VB-STDP-L
VB-10RNDP-L
2005 – 2006 Catalog
Valves
JUMBO RECTANGULAR SERIES
Jumbo box: 26.3" L x 19.8" W x 12.1" H (66,8 cm x 50,3 cm x
30,7 cm)
• VB - JMB: Black body and green lid
• VB - JMBP: Black body and purple lid
• VB - JMBT: Black body and tan lid
• VB - JMBBK: Black body and black lid
• VB - JMB - B: Black body only
• VB - JMB - L: Green lid
• VB - JMBP - L: Purple lid
• VB - JMBT - L: Tan lid
• VB - JMBBK - L: Black lid
• VB - JMB - H: Black body and green lid with locking hex bolt
• VB - JMBP - H: Black body and purple lid with locking hex bolt
• VB - JMBT - H: Black body and tan lid with locking hex bolt
• VB - JMBBK - H: Black body and black lid with locking hex bolt
Jumbo 6" extension: 24.4" L x 17.9" W x 6.75" H (62,0 cm x
45,5 cm x 17,1 cm)
• VB - JMB - 6EXT - B: 6" jumbo extension black body only
• VB - JMB - 6EXT: 6" jumbo extension black body and green lid
SUPER JUMBO RECTANGULAR SERIES
Super jumbo box: 33.1" L x 23.8" W x 15.0" H (84,1 cm x 60,5
cm x 38,1 cm)
• VB - SPR - B: Black body only
• VB - SPR - L: Green lid
• VB - SPRT - L: Tan lid
• VB - SPR - H: Black body and green lid with 2 locking hex bolts
• VB - SPRT - H: Black body and tan lid with 2 locking hex bolts
2005 – 2006 Catalog
MAXI JUMBO RECTANGULAR SERIES
Maxi jumbo box: 40.3" L x 27.1" W x 18.0" H (102,4 cm x 68,8
cm x 45,7 cm)
• VB - MAX - B: Black body only
• VB - MAX - L: Green lid
• VB - MAXT - L: Tan lid
• VB - MAX - H: Black body and green lid with 2 locking hex bolts
• VB - MAXT - H: Black body and tan lid with 2 locking hex bolts
10" ROUND SERIES
10" round box: 10.25" Top D x 10.0" H x 13.75" Bottom D (26,0
cm x 25,4 cm x 34,9 cm)
• VB - 10RND: Black body and green lid
• VB - 10RNDP: Black body and purple lid
• VB - 10RNDT: Black body and tan lid
• VB - 10RNDBK: Black body and black lid
• VB - 10RND - B: Black body only
• VB - 10RND - L: Green lid
• VB - 10RNDP - L: Purple lid
• VB - 10RNDT - L: Tan lid
• VB - 10RNDBK - L: Black lid
• VB - 10RND - H: Black body and green lid with locking hex bolt
• VB - 10RNDP - H: Black body and purple lid with locking hex bolt
• VB - 10RNDT - H: Black body and tan lid with locking hex bolt
• VB - 10RNDBK - H: Black body and black lid with locking hex bolt
10" round 3" extension: 10.25" Top D x 3.75" H x 12.3"
Bottom D (26,0 cm x 9,5 cm x 31,2 cm)
• VB - 10RND - 3B: 3" extension for 10" round black body only
• VB - 10RND - 3: 3" extension for 10" round black body and
green lid
www.rainbird.com
Valves
153
Valves
VB Series
Continued
7" ROUND SERIES
7" round box: 7.1" Top D x 9.0" H x 9.9" Bottom D (18,0 cm x
22,9 cm x 25,1 cm)
• VB - 7RND: Black body and green lid
• VB - 7RNDP: Black body and purple lid
• VB - 7RNDT: Black body and tan lid
• VB - 7RNDBK: Black body and black lid
6" ROUND SERIES
6" round box: 6.1" Top D x 9.0" H x 8.3" Bottom D (15,5 cm x
22,9 cm x 21,1 cm)
• VB - 6RND: Green body and green lid
LOCKING SYSTEMS
• VB - LOCK - H: Hex head 3⁄8" x 2 1⁄4" (1,0 x 5,7 cm) bolt, washer,
and clip
• VB - LOCK - P: Penta head 3⁄8" x 2 1⁄4" (1,0 x 5,7 cm) bolt, washer,
and clip
Boxes mate securely together
Interlocking bottoms for deep installations
154
Valves
www.rainbird.com
2005 – 2006 Catalog
Valves
Manifold System, 1" Half Union
MS Series
Primary Application
Eliminate leaks and the problems with servicing valves by building
manifolds using this high quality manifold system.
Features
• Half union fittings and adapters mate with manifold pieces to
build a quality 1" manifold system for quick and convenient
installations.
• Tight O-ring seals eliminate leakage.
• Variety of outlets, adapters, and couplings offered for different
size PVC and poly pipe.
Operating Range
• Operating pressure up to 235 psi (16,0 bars) at 73°F (23°C)
Model
• MS-SM: Single Manifold With M Buttress Threads
• MS-DM: Double Manifold With M Buttress Threads
• MS-TM: Triple Manifold With M Buttress Threads
• MS-QM: Quadruple Manifold With M Buttress Threads
• MS-MA: F Buttress x M NPT (mates to female valve inlet)
• MS-FA: F Buttress x F NPT (mates to male valve inlet)
• MS-NIP: M Buttress x M NPT (mates to female valve outlet)
• MS-FNIP: M Buttress x F NPT (mates to male valve outlet)
• MS-CAP: Cap With F Buttress Threads
• MS-CPLG: F Buttress x F Buttress Coupling
• MS-125x100: F Buttress x 1 1⁄4" (3,2 cm) Spigot /
1" (2,5 cm) Slip Outlet
• MS-100x075: F Buttress x 1" (2,5 cm) Spigot /
3
⁄4" (1,9 cm) Slip Outlet
• MS-100IA: F Buttress x 1" (2,5 cm) Barb Outlet
MS-100IA
• MS-075IA: F Buttress x 3⁄4" (1,9 cm) Barb Outlet
MS-100IA
MS-100x075
MS-MA
MS-FNIP
MS-NIP
Electric Valves
Separate
MS-FA
MS-125x100
MS-MA
MS-QM
MS-100x075
MS-TM
MS-CPLG
MS-075IA
MS-DM
MS-MA
MS-SM
MS-CAP
MS Series
2005 – 2006 Catalog
www.rainbird.com
Valves
155
Valves
Universal Manifold System for 1" Valves
NEW
UMS Series
Primary Application
Easily create a manifold system for any 1" valve using a pre-pack- For M x barb valves (Poly pipe):
• UMS-2MB: Contains 1 double manifold (MS-DM), 2 female
aged kit that contains all the necessary fittings and adapters.
adapters (MS-FA), and 1 cap (MS-CAP)
Works with most common 1" valves (F x F or M x barb). Great for
• UMS-3MB: Contains 1 triple manifold (MS-TM), 3 female adapters
either PVC or poly pipe systems.
(MS-FA), and 1 cap (MS-CAP)
Features
• UMS-4MB: Contains 1 quadruple manifold (MS-QM), 4 female
• Includes everything needed to quickly make typical manifold
adapters (MS-FA), and 1 cap (MS-CAP)
configurations except the valves.
[See picture on previous page for component examples.]
• Kit version of MS-Series manifold system simplifies ordering.
• Half union fittings and adapters connect to manifolds to build a
quality 1" manifold system for quick and convenient installations.
• Tight O-ring seals eliminate leakage.
Note: This system is not designed to work with the Rain Bird union valves.
Also available
Operating Range
• Operating pressure up to 235 psi (16,0 bars) at 73°F (23 °C)
Models
For F x F valves (PVC pipe):
• UMS-2FF: Contains 1 double manifold (MS-DM), 2 male adapters
(MS-MA), 2 male nipples (MS-NIP), 2 1" slip outlets
(MS-125x100), and 1 cap (MS-CAP)
• UMS-3FF: Contains 1 triple manifold (MS-TM), 3 male adapters
(MS-MA), 3 male nipples (MS-NIP), 3 1" slip outlets
• UMS-4FF: Contains 1 quadruple manifold (MS-QM), 4 male
adapters (MS-MA), 4 male nipples (MS-NIP), 4 1" slip outlets
For F x F valve (Poly pipe)
• UMS-2FB: Contains 1 double manifold (MS-DM), 2 male adapters
(MS-MA), 2 male nipples (MS-NIP), 2 1" barb outlets (MS-100IA),
and 1 cap (MS-CAP)
• UMS-3FB: Contains 1 triple manifold (MS-TM), 3 male adapters
(MS-MA), 3 male nipples (MS-NIP), 3 1" barb outlets (MS-100IA),
and 1 cap (MS-CAP)
• UMS-4FB: Contains 1 quadruple manifold (MS-QM), 4 male
adapters (MS-MA), 4 male nipples (MS-NIP), 4 1" barb outlets
(MS-100IA), and 1 cap (MS-CAP)
156
Valves
DV Valve Union Manifold Kit
(MS-DV/DVF Series)
Primary Application
Ready to install kits for both PVC and poly pipe systems that
include Rain Bird DV/DVF valves
Models
• MS-2DV-SLIP: Two 100-DV Valves with Half Union Manifold Kit
(includes 2 DV valves, 1 MS-DM, 1 MS-CAP, 2 MS-MA, 2 MS-NIP,
3 MS-125X100)
• MS-3DV-SLIP: Three 100-DV Valves with Half Union Manifold Kit
(includes 3 DV valves, 1 MS-TM, 1 MS-CAP, 3 MS-MA, 3 MS-NIP,
4 MS-125X100)
• MS-2DV-BARB: Two 100-DV-MB Valves with Half Union Manifold
Kit (includes 2 DV-MB valves, 1 MS-DM, 1 MS-CAP, 2 MS-FA,
1 MS-MA)
• MS-3DV-BARB: Three 100-DV-MB Valves with Half Union Manifold
Kit (includes 3 DV-MB valves, 1 MS-TM, 1 MS-CAP, 3 MS-FA,
1 MS-MA)
• MS-2DVF-SLIP: Two 100-DVF Valves with Half Union Manifold Kit
(includes 2 DVF valves, 1 MS-DM, 1 MS-CAP, 2 MS-MA, 2 MS-NIP,
3 MS-125X100)
• MS-3DVF-SLIP: Three 100-DVF Valves with Half Union Manifold Kit
(includes 3 DVF valves, 1 MS-TM, 1 MS-CAP, 3 MS-MA, 3 MS-NIP,
4 MS-125X100)
www.rainbird.com
2005 – 2006 Catalog
Valves
Manifold Tees & Crosses
Quick-Coupling Kit
MAN Series
RQC Series
Primary Application
These Rain Bird fittings with 1" (26/34) male NPT threads allow
you to make more compact manifolds with fewer fittings. Choose
from two different styles.
Primary Application
The quick coupler kit provides a convenient source of water without
an unsightly hose bib. Applications include installations near a
driveway for washing cars or adjacent to a garden plot.
Features
• Male NPT threads eliminate the need for a fitting on each valve
installed – no nipple required as with traditional manifold tees
Operating Range
Model
• MAN-X: Manifold Cross for 1" (26/34) NPT valves
• MAN-T: Manifold Tee for 1" (26/34) NPT valves
Features
• Rugged two piece valve body design
• “Turn and lock” key with ribbed grip
• Swivel elbow with male hose thread O-ring seal
• Triple swing joint with leak-free O-ring seals
• Stainless steel clamp for anchoring the valve to a stake
Operating Range
• Not for use as a connection for compressed air
Model
• RQC 33: 3⁄ 4" (20/27) plastic residential quick coupler valve kit
MAN-T
MAN-X
2005 – 2006 Catalog
RQC 33
www.rainbird.com
Valves
157
Valves
Ball Valves
BV Series
Primary Application
Used to isolate watering zones and provide easier system maintenance when installed inline. Sizes range from 1⁄2" to 4" outlets,
offered in both slip x slip and female NPT x NPT configurations.
Features
• PVC – Schedule 80 equivalent
• Brass – full port
• Wide product line: 1⁄2" – 4" (1,3 cm – 10,2 cm)
Operating Range
Plastic Slip x Slip and F x F NPT Maximum Operating Pressure:
• 1⁄2" to 2 1⁄2" (1,3 cm to 6,4 cm): 200 psi (13,8 bars)
• 3" to 4" (7,6 cm to 10,2 cm): 150 psi (10,3 bars)
Brass, Full Port Maximum Operating Pressure:
• 1⁄2 to 2" (1,3 cm to 5,1 cm): 600 psi (41,3 bars)
• 2 1⁄2" to 4" (6,4 cm to 10,2 cm): 400 psi (27,6 bars)
Models
• BV050SS: 1⁄2" (1,3 cm) plastic slip x slip
• BV075SS: 3⁄4" (1,9 cm) plastic slip x slip
• BV100SS: 1" (2,5 cm) plastic slip x slip
• BV125SS: 1 1⁄4" (3,2 cm) plastic slip x slip
• BV050FF: 1⁄2" (15/21) plastic F x F NPT
• BV075FF: 3⁄4" (20/27) plastic F x F NPT
• BV100FF: 1" (26/34) plastic F x F NPT
• BV125FF: 1 1⁄4" (33/42) plastic F x F NPT
• BV050FP: 1⁄2" (15/21) brass, full port F x F NPT
• BV075FP: 3⁄4" (20/27) brass, full port F x F NPT
• BV100FP: 1" (26/34) brass, full port F x F NPT
• BV125FP: 1 1⁄4" (33/42) brass, full port F x F NPT
BV050SS
BV050FF
BV050FP
158
Valves
www.rainbird.com
2005 – 2006 Catalog
Valves
Drain Valves
Wire Splice
Valve Box Hand Pump
Valve ID Tags
16A-FDV/
16A-FDV-075
SPLICE-1
VBP-36
VID Series
Primary Application
Evacuate lateral lines after each
irrigation cycle to reduce damage caused by freezing.
Primary Application
Provides a waterproof wire
connection for wet and direct
burial applications. Comprised
of a wirenut, immersed in a
waterproof gel, all contained in
a UV resistant black plastic
housing.
Primary Application
Easily removes water from valve
boxes, trenches, or other collection areas.
Primary Application
Used as a semi-permanent
method to identify a valve with
its associated controller station.
Features
• Automatically drains pipes to
prevent freezing damage
• Plastic perforated cap screens
out large particles; dispersion
pad filters out smaller particles
Features
• Fast, reliable splicing
• UV resistant black housing is
Operating Range
pre-filled with non-toxic lithi• Operating pressure up to 125 psi
um grease
(8,5 bars)
Specifications
• Flow: 1 GPM (0,23 m3⁄h;
0,06 l/s) maximum rate before • Splices low voltage electrical
control wires: 30 V max
sealing
• Fits wires up to
Specifications
5 #18, #20, or #22 AWG
• Average opening pressure when
4 #16 AWG
installed vertically: 2.5 psi
2 #14 AWG
(0,2 bar)
Model
• Average closing pressure when
• SPLICE-1
installed vertically: 5.5 psi
(0,4 bar)
• Diameter: 1 3⁄ 8" (3,5 cm)
Length: 1" (2,5 cm)
Features
• Compact, lightweight and
durable
• Low cost tool for cleaning out
valve boxes
Dimensions
• 2" (5,1 cm) diameter
• 36" (91,4 cm) compact length
• 61" (154,9 cm) fully extended
length
Model
• VBP-36
Features
• Preprinted serialized tags available with 1 to 24, or 25 to 48
station numbers
• Bright yellow color for maximum contrast and visibility
• Purple color available for
reclaimed water use
• Packed with a marker for coding different control zones on
very large sites.
Model
• VID1Y24: Yellow valve ID tags,
numbered 1 to 24
• VID25Y48: Yellow valve ID tags,
numbered 25 to 48
• VID1P24: Purple valve ID tags,
numbered 1 to 24
• VID25P48: Purple valve ID tags,
numbered 25 to 48
Models
• 16A-FDV: 1⁄ 2" (15/21) male
threaded inlet
• 16A-FDV-075: 3⁄ 4" (20/27) male
threaded inlet
16A-FDV
2005 – 2006 Catalog
SPLICE-1
VBP-36
www.rainbird.com
VID1Y24
Valves
159
Valves
Quick-Coupling Keys
Cover Keys
Hose Swivel
Valve Keys
Locking
Cover Key
SH Series
Primary Application
Key threads into top of quick-coupling valve to provide water access.
Primary Application
Unlocks the thermoplastic
cover on quick-coupling valves
equipped with locking covers.
Primary Application
Attaches water hose to quickcoupling valve key.
Models
• 33DK: 3⁄ 4" (20/27)
• 44K: 1" (26/34)
• 55K-1: 1" (26/34)*
• 7K: 1 1⁄ 2" (40/49)*
* Available with BSP threads; specify when ordering.
Corresponding Valve Keys
Top Pipe Threads
Male
Female
Valve
Key
3RC
33DRC/33NP
44RC/44NP
5RC
7
33DK
33DK
44K
55K-1
7K
⁄"
3⁄4"
1"
1"
1 1⁄2"
Valve
Key
Top Pipe Threads
Male
Female
3RC
33DRC/33NP
44RC/44NP
5RC
7
33DK
33DK
44K
55K-1
7K
20/27
20/27
26/34
26/34
40/49
34
12
⁄"
1⁄2"
3⁄4"
1 1⁄4"
Features
• Locks and unlocks the
optional locking cover on
quick-coupling valves.
• Operates the valve marker
compression lock.
• Compatible with models
33DLRC, 33DNP, 44LRC, 44NP,
and 5LRC.
Model
• 2049 Cover Key
METRIC
*Available with BSP threads.
2049
Valves
Specifications
• SH-0
3⁄ 4" (20/27) female pipe thread x
3⁄ 4" (20/27) male hose thread
• SH-1
1" (26/34) female pipe thread x
3⁄ 4" (20/27) male hose thread
• SH-2
1" (26/34) female pipe thread x
1" (26/34) male hose thread
• SH-3
1 1⁄ 2" (40/49) female pipe thread
x 1" (26/34) male hose thread
Models
• SH-0
• SH-1
• SH-2*
• SH-3
15/21
15/21
20/27
33/42
55K-1
160
Features
• Swivels up to 360°.
• Allows hose to be pulled in any
direction.
• Prevents hose damage.
www.rainbird.com
SH-0
2005 – 2006 Catalog
Valves
Pressure Hose Gauge
Assembly
Valve Accessories
Valve Accessories
PHG
Non-Potable Valve Handle Assembly
B to A Solenoid
Adapter Kit
Primary Application
Attaches to Schrader valve on
PRS-D pressure regulator to
visually read outlet pressure.
Primary Application
Purple flow control handle identifies valve as part of a non-potable
system.
Primary Application
Adapter allows use of
Rain Bird model A (green)
solenoid on B series valves.
Features
•
Easily field installed.
Features
• Monitors valve outlet pressure. • Sizes for all Rain Bird commercial valves.
• Quick connect hose fitting is
Models
simple to connect and discon- • PGA-NP-HAN1 (1" and 1 1⁄ 2" PGA Valves)
nect to PRS-D Schrader valve. • PGA-NP-HAN2 (2" PGA Valves)
• PEB-NP-HAN1 (1" PEB/PESB Valves)
Specifications
• 0 to 160 psi (0 to 11,04 bars) • PEB-NP-HAN2 (1 1⁄ 2" and 2" PEB/PESB Valves)
gauge provides accurate reading • EFB-GB-NP-HAN (all EFB-CP and GB Valves)
• BPE-NP-HAN (3" BPE/BPES Valves)
of outlet pressure.
• 36" (91,4 cm) long, highpressure hose permits easy
reading of gauge.
Model
• PHG
Features
• Rugged construction.
• Includes model A solenoid.
• Easily field installed.
• Fits all plastic and brass
commercial valves (PGA, PEB,
PESB, GB, amd EFB-CP)
• Standard on BPE and BPES
series valves
• 24 VAC 50/60 Hz (cycles/sec.)
solenoid
• Inrush current: 0.41 A (9.84 VA)
at 60Hz
• Holding current: 0.28 A (6.72 VA)
at 60Hz
• Coil resistance: 28 Ohms,
nominal
Model
• SOL-ADA
PHG
2005 – 2006 Catalog
BPE-NP-HAN
PEB-NP-HAN PGA-NP-HAN EFB-GB-NP-HAN
www.rainbird.com
Solenoid Adapter
Valves
161
Valves
Valve Marker
Valve Wire Sizing Procedure
DV-DUIT
63100
Primary Application
Meets certain city code
requirements for valve wires
to be enclosed in a conduit.
Primary Application
Use with 2" PVC Class 200 pipe
to provide easy detection of a
valve.
Features
• Combination solenoid
handle/conduit cover.
• Easy to turn (swivel) solenoid.
• Adjustable conduit cover.
• Easy to install and work with
solenoid wires.
• Meets city building codes
in certain areas – check local
codes.
Features
• Bright yellow color allows easy
visual detection
• Metal screw insert allows easy
detection with a metal detector
Model
• 63100
Step 1
Determine actual distance, along wire run, from controller out to
the first valve on a circuit and between each succeeding valve on
a multiple valve circuit (as shown in example below). Example:
(Two watt solenoid, 26.5 volt transformer at 150 psi water pressure
at valves.)
Step 2
Calculate the equivalent circuit length for each valve circuit on the
controller. (See chart on following page)
Step 3
Selecting Common Ground Wire Size: Using the longest equivalent
length calculated above, go to the appropriate valve chart and
select a ground wire and a control wire that are as close to the
same size as possible (the ground wire size should always be equal
to or one size larger than the control wire size.) In the example
above, the circuit for station #3 has the longest equivalent length,
7000 feet. In the chart (for this example use the high pressure chart
for 150 psi water pressure at the valve and a 26.5 volt transformer)
select a wire size combination of size 14 and 12 wire. Select
common ground wire as size 12 wire. Since one common ground
wire shall be used for all valves on the controller, you have now
established the common ground wire size for that controller as size
12 wire.
Model
• DV-DUIT
Step 4
Sizing Circuit Control Wires: Using the common ground wire size
selected in Step 3 (size 12), proceed to select each control wire
size from the chart using the calculated equivalent length for
each circuit.
Station #1: Equiv. Length = 1 valve x 2000 ft. = 2000 ft.
select size 18 control wire
Station #2: Equiv. Length = (1 valve x 1000 ft.)
+ (2 valves x 2000 ft.) = 5000 ft. select size 16 control wire
Station #3: Equiv. Length = (1 valve x 500 ft.) + (2 valves x 1000 ft.)
+ (3 valves x 1500 ft.) =7000 ft. select size 14 control wire
DV-DUIT
162
63100
Valves
www.rainbird.com
2005 – 2006 Catalog
Valves
24 VAC Solenoid Valves Wire Sizing
6.8 VA Valves with 26.5 Volt Transformers
Equivalent Feet of Circuit Length
80 psi (5,5 bars) Water Pressure at Valve
■
▲
Common
Wire Size
Control Wire Size
18
16
14
12
10
8
6
4
18
16
14
12
10
8
6
4
3000
3700
4300
4800
5200
5500
5700
5800
4300
5900
7700
9400
11000
12300
13300
14000
4800
6900
9400
12200
15000
17500
19600
21100
5200
7700
11000
15000
19400
23900
27800
31100
5500
8300
12300
17500
23900
30900
38000
44300
5200
8800
13300
19600
27800
38000
49200
60400
5800
9100
14000
21100
31100
44300
60400
78200
3700
4800
5900
6900
7700
8300
8800
9100
■
▲
Common
Wire Size
Control Wire Size
18
16
14
12
10
8
6
4
18
16
14
12
10
8
6
4
2800
3500
4100
4500
4900
5200
5400
5500
4100
5500
7200
8900
10300
11600
12500
13200
4500
6500
8900
11500
14100
16500
18400
19900
4900
7300
10300
14100
18300
22500
26200
29300
5200
7800
11600
16500
22500
29100
35700
41700
5400
8300
12500
18400
26200
35700
46300
56900
5500
8500
13200
19900
29300
41700
56900
73600
3500
4500
5500
6500
7300
7800
8300
8500
■
▲
Common
Wire Size
Control Wire Size
18
16
14
12
10
8
6
4
18
16
14
12
10
8
6
4
2600
3200
3800
4200
4600
4800
5000
5100
3800
5200
6700
8200
9600
10800
11600
12200
4200
6000
8200
10700
13100
15300
17100
18500
4600
6700
9600
13100
17000
20900
24400
27300
4800
7300
10800
15300
20900
27100
33200
38800
5000
7700
11600
17100
24400
33200
43100
52900
?
7900
12200
18500
27300
38800
52900
68500
3200
4200
5200
6000
6700
7300
7700
7900
■
▲
Common
Wire Size
Control Wire Size
18
16
14
12
10
8
6
4
18
16
14
12
10
8
6
4
2400
3000
3500
3900
4300
4500
4600
4700
3500
4800
6200
7700
9000
10000
10800
11400
3900
5600
7700
10000
12200
14300
16000
17300
4300
6300
9000
12200
15900
19500
22800
25400
4500
6800
10000
14300
19500
25300
31000
36200
4600
7200
10800
16000
22800
31000
40200
49400
4700
7400
11400
17300
25400
36200
49400
63900
2005 – 2006 Catalog
3000
3900
4800
5600
6300
6800
7200
7400
www.rainbird.com
Valves
163
Valves
4.6 VA Valves
Equivalent Feet of Circuit Length
For DV, DVF, ASVF Valves
Common Control Wire Size
Wire Size 18
16
14
12
Wire Size 18
16
14
12
18
3000
3680
4290
4800
18
1400
1720
2000
2240
16
3680
4700
5850
6840
16
1720
2200
2730
3190
14
4290
5850
7570
9300
14
2000
2730
3530
4340
12
4800
6840
9300
12050
12
2240
3190
4340
5620
Wire Size 18
16
14
12
Wire Size 18
16
14
12
18
2300
2820
3290
3680
18
600
730
860
960
16
2820
3660
4490
5240
16
730
950
1170
1370
14
3290
4490
5800
7130
14
860
1170
1510
1860
12
3680
5240
7130
9420
12
960
1370
1860
2410
Controller
Ground
Common Ground Wire
Controller Stations
Actual Length 2000 ft
Valve = 1 A
Circuit Control Wire
Valve = 2 B
Valve = 2 A
Valve = 3 A
164
Valves
www.rainbird.com
Valve = 3 B
Valve = 3 C
2005 – 2006 Catalog
Spray Heads
Rotary
Nozzles
Install Confidence.™
Install Rain Bird Controllers.
®
Rotors
Impacts
Valves
Controllers
Central
Controls
Pump Stations
Xerigation®
Controllers
Accessories
Resources
& Training
Reference
Controllers
166
Controllers
www.rainbird.com
2005 – 2006 Catalog
Controllers
Major Products
RC-Bi
RC-C
Ec
ESP-TM
ESP
ESP
Modular
ESP-LX Plus
Residential
Light Commercial
Commercial/Industrial
Type of Controller
Electromechanical
Hybrid
Solid State
Indoor Location
Outdoor Location
Features
Stations (up to)
12
12
9
8
8
13
24
Programs
1
1
3
2
2
3
4
Station Timing (up to)
60 min
60 min
4 hr*
99 min*
99 min*
4 hr*
12 hr*
Number of Starts per Program (up to)
23
23
4
6
3
4
6
Surge Protection
230VAC Option
Master Valve/Pump Start
Water Budgeting
******
******
Individual Program Shut-Off
Rain Delay
Battery Programmable
Sensor Terminals, Status Indicator & Override
Delay Between Stations (up to)
9 hr
Simultaneous Multi-Station Operation
™
Cycle+Soak
Overlapping Programs
****
High Flow Alarm & Shutdown
Irrigation by Volume
Irrigation by ET (evapotranspiration)
Manual On/Off
Remote Control Compatible
Diagnostic Test (RASTER™)
Diagnostic Circuit Breaker
Out-of-Valve Box Programming
Submersible (up to)
Vandal/Tamper Resistant
Self-Cleaning Solenoid
Low Battery Indicator
Programming Schedule
14 Day-of-Week
7 Day-of-Week
2, 3, 5 Fixed Cycle
1-7 Variable Cycle
1-31 Variable Cycle
1-99 Variable Cycle
Odd/Even Cycle
Odd 31st
365-Day Calendar
Event Day Off
Pre-Programmed Cycles
3
Pre-Programmed Run Times
2
Central Control Compatibility
Maxicom 2® Upgradeable
Cabinet
Plastic-Indoor
Plastic-Outdoor
Metal-Outdoor
Stainless Steel Pedestal Option
Painted Pedestal Option
Accessories
RSD Rain Sensor
TBOS Rain Shut-Off Device
Extended Range Antenna Kit
Extended Length Cable Bracket
Rubber Cover
*With water budgeting, timing can be extended (Ec, ESP-TM, ESP, ESP-Modular, ESP-LX+, ESP-MC, IM)
**Programmable by station
***** Not compatible with Rain Bird remotes ****** Selectable for each program ******* Software override. Up to 12 sensor inputs.
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
2005 – 2006 Catalog
•
•
One-Button
Sequencing
System
Multi-Function
Remote Control
System
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
40
4
12 hr*
8
48
7
24 hr*
8
•
•
•
•
•
•
•
•
•
•
•
•**
•******
•
•
•
•
•
9 hr
•
•
•
•
•
•
•
•*****
•
•
•
•
•**3 max.
•******
•
•
•
•
*******
•
20 min.
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
TBOS™
Battery
Operated
Controllers
•
•
•
•
EASY RAIN™
Battery
Operated
Controllers
•
•
•
IM
•
•
•
ESP-MC
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
www.rainbird.com
1
1
90 min
2
•
•
•3.3 ft (1 m)
•
•
•
•
•
•
6
3
12 hr
8
•
•
•
•
•
•
•
•
•
•
3.3 ft (1 m)
•
•
•
•
•
6
7
•
•
•
•
•
•
•
•
•
***Sensor terminals and override switch only
•
•
•
•
•
•
****With program D only
Controllers
167
Controllers
FAC T
R E P O RT
Superiorsurge
surgeand
andcontamination
contaminationprotection
protection assures
assures
Superior
unrivaledperformance
performanceand
andsafeguards
safeguardsyour
yourinvestment.
investment.
unrivaled
Trust that when you install Rain Bird® ESP-MC controllers, you can confidently expect that these
products will be more durable than the competition, will be far more reliable, and will deliver superior
performance year after year. Advanced surge and contamination protection technology safeguards each
unit, providing many times more protection against lightning strikes and environmental contamination
than the competitor products.
Advanced Surge Protection
Contamination Resistant Design
Multiple levels of surge protection reliably block surges
of varying magnitude and duration.
■ Contamination Resistant Front Panel—offers superior
■ Gas Tube—absorbs extreme surges
■ Inductor—ruggedly constructed
to significantly slow down
additional surges
■ MOV—provides the final level
of protection against surges
168
Controllers
protection against the direct impact of water or other
contaminants when the cabinet door is left open
■ Internal Cabinet Frame with Gasket—helps prevent
water or other contaminants from entering the cabinet
and corrupting the output board circuitry
■ Coating of the Output Board Circuitry—provides
powerful protection against humidity and other
environmental contaminants
www.rainbird.com
2005 – 2006 Catalog
Controllers
Install the proven performance of
Rain Bird® ESP-MC Controllers.
Competitive Advantages
of Advanced Surge Protection.
Lightning strikes are one of the biggest enemies of controller
products. They generate powerful surges that damage electronic
circuitry inside. Lightning strikes are not only very powerful but often
occur multiple times in rapid succession. Each surge further weakens
circuitry. As the following charts indicate, the Rain Bird® ESP-MC
controller provides many times the protection against powerful single
and multiple surges created by lightning when compared to the
competition.
Going Head-to-Head with
the Competition.
To measure the effectiveness of Rain Bird’s Advanced Surge
Protection, side-by-side comparisons with the competition were
conducted. The surges generated during the test are similar to surges
affecting controller products during nearby lightning strikes. The clear
advantage of Advanced Surge Protection can be seen in the following
charts.* The Rain Bird ESP-MC controller sustained no damage after
single and multiple surges of up to 20,000 Volts were applied, unlike
the two competitor controller products that were permanently
damaged after surges of less than 2,500 Volts were applied.
Station-to-Valve
Common: Single Surge*
20000
20000†
VOLTS
15000
10000
5000
2450
Note: Single surge applied
between a station output
terminal and the valve
common terminal. This is
the most common source
of controller failures
during lightning strikes.
1200
0
Hunter
ICC
Irritrol
MC Plus
The Rain Bird ESP-MC controller features superior components
to increase protection against environmental contamination
when the cabinet door is left open. Just a few of these
components include:
• Overlay with membrane switches
• Rubber boot on the sensor switch
• Battery compartment with door
• Strategically positioned gaskets
Going Head-to-Head
with the Competition.
Comparison of Rain Bird ESP-MC and Irritrol MC Plus
circuitry after the water infiltration test:
Note the corrosion
formed on the
competitor model
compared to the
clean Rain Bird
ESP-MC circuitry.
Irritrol MC Plus
20000†
15000
The following chart reflects the results of the water infiltration
test. The Rain Bird ESP-MC with its Contamination Resistant
Design dramatically outperformed the competition. The
Rain Bird ESP-MC sustained no permanent damage during
the four-hour water infiltration test, unlike the two competitor
controller products that were permanently damaged after just
a couple of minutes.
1400
Hunter
ICC
Irritrol
MC Plus
240
MINUTES
5000
1400
300
Note: Single surge applied
between two station output
terminals.
10000
Rain Bird ESP-MC
To measure the effectiveness of Rain Bird’s ESP-MC
Contamination Resistant Design, side-by-side water
infiltration tests were conducted. The doors were removed
from two competitor controller products and the Rain Bird
ESP-MC controller. The controllers were then subjected to a
high-pressure water stream inside a closed environment. A
spray head—operating at 60 psi—was used as the water
source.
Station-to-Station:
Single Surge*
20000
VOLTS
Rain Bird
ESP-MC
Competitive Advantages of
Contamination Resistant Design.
Functional Failure
Serious malfunction
occurred, such as LCD
display blank, station
outputs non-functional
180
0
159
VOLTS
20000
Rain Bird
ESP-MC
20000†
Station-to-Valve
Common: Multiple
Surges*
Note: Test units exposed to
20 surges of a given voltage
between a station output
terminal and the valve
common terminal.
15000
10000
5000
2000
0
Hunter
ICC
120
Fully Functional
No problems encountered
60
0
1000
Irritrol
MC Plus
Rain Bird
ESP-MC
Display Intermittent
LCD display/indicators
not-stable, but controller
still fully functional
2
.5
Hunter
ICC
Irritrol
MC Plus
Rain Bird
ESP-MC
Water Infiltration with Cabinet Door Open
* Results show the highest voltage level without any adverse effect on controller operation.Voltages shown are the voltages generated by the testing equipment. No external grounding was used during the test.
† The maximum generated voltage was 20,000V due to the testing equipment operational limits. The ESP-MC is built to withstand higher voltage levels than 20,000V. It is not built to withstand a direct lightning strike.
All tests conducted at Rain Bird’s Controls Manufacturing Division in San Diego, CA. Test results reflect a comparison of Rain Bird products with those of its principal competitors manufactured
in the second quarter of 2003.
2005 – 2006 Catalog
www.rainbird.com
Controllers
169
Controllers
Electromechanical Controllers
RC-Bi Series
4, 7, 12 Stations
Primary Application
Indoor electromechanical controller for residential use. Ideal for
areas subject to either electrical storm activity or power surges,
as well as applications where programming ease is essential.
Features
• Independent station timing knobs make this controller the easiest
to program, read, and understand
• Electromechanical design for best reliability and electrical surge
resistance
• 24-hour clock (automatic starts on any hour except midnight)
allows automatic irrigation cycles day or night and provides for
multiple, repeat cycles
• Easy, at-a-glance programming provides a visual display of the
watering schedule
• Master valve/remote pump start circuit for optimal irrigation control
• External, plug-in transformer (U.S./Canada) provides convenient
installation
• Front panel-mounted fuse for easy access and quick diagnostics
• Quick-connect plug on front panel for ease of installation
• Indoor-mount cabinet for clean-looking, professional installation
• Latch accepts padlock for greater security
• Compact size saves space. Master on/off switch allows shutdown
for rain, winter season, and maintenance
• UL, CSA listed; CE approved
Operating Specifications
• RC-4Bi: Station timing: 3-60 minutes (in 1-minute increments)
• Automatic starts: 1 to 23 per day
• Programming schedule: 14-day calendar dial for every-day,
every-other-day, and other pattern starts for a 2-week period
• Input required: 117VAC, 60Hz external plug-in transformer
(U.S./Canada) or 230VAC, 50Hz input transformer
• Output: 24VAC, 60Hz or 50Hz, 1.25A
• 1.5A fuse in front panel-mounted holder
• Station capacity: One 24VAC, 7VA solenoid valve per station
when master valve/pump start circuit is used; up to two valves
per station when master valve/pump start circuit is not in use
Dimensions
• Width: 111⁄ 2" (29,2 cm)
• Height: 8" (20,3 cm)
• Depth: 51⁄ 2" (14 cm)
Models
• RC-4Bi: 4 stations
• RC-4Bi-50Hz: 4 stations, 230VAC, 50Hz
RC-7Bi
170
Controllers
www.rainbird.com
2005 – 2006 Catalog
Controllers
Electromechanical Controllers
RC-C Series
4, 7, 12 Stations
Primary Application
When durability and ease of operation are paramount, Rain Bird’s
RC-C Series controllers are the best choice. Featuring
independent station timing, a master valve/pump start circuit,
and a key-locking, weatherproof cabinet, it’s not surprising this
is the industry’s leading commercial-grade electromechanical
irrigation controller.
Features
• Independent station timing knobs make this controller easy
to program, read, and understand
• Electromechanical design for best reliability and electrical
surge resistance
• 24-hour clock (automatic starts on any hour except midnight)
allows automatic irrigation cycles day or night and provides for
multiple, repeat cycles
• Easy, at-a-glance programming provides a visual display of the
watering schedule
• Master valve pump start circuit for optimal irrigation control
• Master on/off switch allows shutdown for rain, winter season,
and maintenance
• Nipple-mounted internal transformer for a clean, professionallooking installation
• Front panel-mounted circuit breaker for easy access and quick
diagnostics
• Quick-connect plug on front panel for ease of installation
• Key-locking, weatherproof outdoor-mount plastic cabinet
• Easy-access terminal strip
• UL Listed
• Input required: 117VAC ± 10% @ 0.45A, 60Hz or
220/240/260V ± 10% @ 0.45A, 50Hz
• Output: 26.5VAC, 60Hz or 50Hz, 1.5A
• Reset circuit breaker: 2.1A holding, 3.0A break
•Multi-valve station capacity: Up to three 24VAC, 7VA solenoid
valves per station when master valve/pump start circuit is used;
four valves per station when master valve/pump start circuit
is not in use
Dimensions
• Width: 111⁄ 2" (29,2 cm)
• Height: 9 3⁄ 4" (24,8 cm)
• Depth: 6 3⁄ 4" (17,1 cm)
Optional Features
• PED-RCC Pedestal and adapter mounting kit
• ADP-RCC Adapter for pipe pedestal
Models
• RC-4C: 4 stations
• RC-1260C-50Hz: 12 stations, 230VAC, 50Hz
• RC-4C: Station timing: 3-30 minutes (in 1-minute increments)
• RC-7C: Station timing: 3-30 minutes (in 1-minute increments)
• RC-1260C: Station timing: 6-60 minutes (in 2-minute
increments)
• Automatic starts: 1 to 23 per day
• Programming schedule: 14-day calendar dial for every-day,
every-other-day, and other pattern starts for a 2-week period
RC-7C
2005 – 2006 Catalog
www.rainbird.com
Controllers
171
Controllers
Three Program Hybrid Controllers
Ec Controller
4, 6, 9, Stations
Indoor Controller for Residential Use
Primary Application
Incorporating E Class technology for field proven reliability, the
Ec controller is designed for new residential landscapes. With the
preset watering schedule options, including one for the
establishment of new lawn, programming is quick and simple.
The sleek compact design installs fast and, with programmability
under battery power, can even be setup months prior to
AC hookup to the job site. And with three independent programs
the Ec provides versatile irrigation control for lawn, shrub, and
even drip irrigation.
Features
• Preset schedules for quick and simple set-up of common
watering schedules
• Programmable under battery power for programming prior to
installation or AC hookup
• Easy to follow installation, programming and operation
• English, Spanish and French manual
• Test Program (1-10 min. all stations) for system operational
testing
• Battery backup for memory and time protection, in case of power
outage (battery included)
• Default program in case a power outage outlasts the memory
protection (The default program automatically clears itself when
the controller is reprogrammed.)
• Flashing LCD screen (in AUTO setting) to indicate operation under
default program
• Electrical surge protection (input) for reliability
• Diagnostic circuit breaker without a fuse identifies a station with
valve or wire fault and continues to water operable stations
• Three programs (A, B, and C) with independent cycles allow mixed
irrigation applications
• 365-day calendar for ODD or EVEN day watering or
ODD-with-31st-of-the-month-off selection per program
(adjusts for leap-year)
• Repeating day cycles, allow irrigation every 1, 2, 3, 4-days, etc.
up through 7. (In the 7-day weekly cycle any day can be set ON
or OFF as a watering day.)
• Manual “clear” function allows manual erasure of all programs
• Auto-sensing a.m./p.m. or 24-hour-format time display mode
• Manual station and cycle option allows you to spot water when
needed
• UL, cUL listed; CE, C-Tick approved
• Programming schedule options: ODD day/date watering (per
program), EVEN day/date watering (per program), 1 through 6-day
repeating cycle (per program), 7-day weekly cycle with any day ON
or OFF setting, and ODD less 31st day of the month watering
• Station Timing: 0 to 240 minutes in 1-minute increments
• Automatic starts per water day: 12 start times (4 per program
per day)
• Global Water Budgeting: 10%-200% in 10% increments
• Input required: 117 VAC ± 10%, 60 Hz (230 VAC international
models available)
• Output 24 VAC @ 0.65A
• Valve capacity: One 24 VAC, 7VA solenoid valve per station plus a
master valve
• Terminal strip capacity: accepts #20, #18, or #16 AWG
(0,813 mm, 1,22 mm, or 1,63 mm) size valve wire
Dimensions
• Width: 61⁄2" (16,5 cm)
• Height:55⁄8" (14,2 cm)
• Depth: 15⁄8" (4,0 cm)
Models
• E-4c: 4 station, indoor
E-6C
172
Controllers
www.rainbird.com
2005 – 2006 Catalog
Controllers
Extra-Simple Programming and Easy Installation
ESP-TM Series Controllers
4, 6, 8 Stations
Indoor Controller for Residential Use
Primary Application
Incorporating all the proven features of the ESP Series, the
ESP-TM family of hybrid controllers is a prime example of making
a good thing better. With their slim line cabinets, ESP-TM
controllers are as attractive to look at as they are simple to use.
And, they boast a number of water-saving features simply not
found on competitively priced units. Dual programming eliminates
over watering one area in order to maintain another. Watering
time flexibility is further enhanced by two-, three- and five-day
fixed watering cycles or a seven-day variable cycle. Best of all,
water budgeting can alter all watering times from 10 to 200
percent-with just a single touch.
The ESP-TM Series from Rain Bird. Simplicity at its finest.
Features
• ESP Extra-Simple Programming
• Two independent programs (A and B)
• “Flip Strip “ terminal strip permits valve wire hookup
without screws
• Wiring skirt for clean looking, professional installation
• System water budgeting makes seasonal adjustments quick
and easy
• Precise station timing in 1-minute increments
• Programmable day-of-week watering schedule
• Independent dual programming
• Easy-to-understand AM/PM clock
• Self-prompting alphanumeric liquid crystal display (LCD)
• .65A external plug-in style transformer
• Slim, indoor cabinet
• Manual start/advance capability for semiautomatic operation
• Mounting screws provided
• Large, high contrast LCD
• Input required: 117VAC, 60Hz
• Output 24VAC, .65A
• Overload fuse: .5A (spare fuse provided in access cover)
• Surge protection: Primary input side has built-in MOV (metal oxide
varistor) to protect microcircuitry. Output side has 1 built-in MO V
for each valve station. A grounding wire for output surge
protection system is provided
• Battery backup: A 3V lithium coin cell battery maintains program
memory up to several months and keeps timing accuracy during a
power outage (battery included with controller)
• Default program: After prolonged power interruption, each station
waters 10 minutes beginning 8 hours after power resumes—once
per day for the 7-day custom cycle or on the first day of the 2-, 3or 5-day fixed cycle
• Single-valve station capacity: One 24 VAC, 7VA solenoid valve per
station, plus a master valve
Dimensions
• Width: 7" (17,8 cm)
• Height: 8 1⁄4" (21 cm)
• Depth: 2 1⁄4" (5,7 cm)
Models
• ESP-4TM: 4 stations
• Station timing: 0-99 minutes (in 1-minute increments); 0-198
minutes with water budgeting
• Automatic starts: 3 per day for each program (6 per day when
using dual program capability)
• Programming schedule: 2-, 3- or 5-day fixed cycle or 7-day
variable cycle
• Water budgeting: 10-200% in 10% increments
2005 – 2006 Catalog
www.rainbird.com
ESP-6TM
Controllers
173
Controllers
Maximize Your Productivity
ESP Modular Series
4, 6, 8 Stations
Indoor or Outdoor for Residential and Light Commercial Use
Primary Application
A member of the popular ESP family of controllers, the ESP
Modular is designed for residential and light commercial
landscapes where flexibility to adapt to growing landscaping needs
is key. Never again will you have to replace a controller to add
more stations. This controller maximizes your productivity by
saving you time and money. It improves upon Rain Bird’s already
easy to use ESP style of programming with a large, easy to read
display and intuitive programming sequence, making this the most
user-friendly controller in its class. And features like the Contractor
Default ™ program make service calls more efficient and earn you
more money by taking less time. ESP Modular controllers make
time work to your advantage.
Features
• Easily upgrades from a four station base model to 13 stations with
the addition of 3-station modules at installation or in the future
• Hot-swappable modules can be installed while the controller is in
operation and in any position
• Contractor Default™ Program allows the contractor to save his own
default program and retrieve it with the push of a button. Useful in
easily reloading a schedule that has been altered by a homeowner
or to replace a temporary schedule for new seed or sod
• Enhanced Diagnostic Feedback™ alerts the user to conditions
when watering is suspended due to an activated sensor, shorted
stations or programming errors with a warning light and text
message on the LCD
• Auxiliary Station™ can be set to bypass an active sensor to allow
watering even if the other stations are disabled or can be set as a
normal station
• 365-day calendar with leap year intelligence means that you can
set an “Odd” or “Even” day watering schedule and not worry about
changing the date on leap years
• Four irrigation cycle modes for maximum flexibility and compliance
to all major watering restrictions (Custom 7-day calendar, cyclic
1-31 day interval, and odd/even day calendar)
• Non-volatile memory maintains the irrigation schedule indefinitely
during a power outage
• Lithium battery maintains the time and date for up to 6 months
(cumulative) in the absence of AC power.
• Permanent day off allows the user to set any day of the week as a
non-watering day in any program or schedule, making it easy to
comply with watering restrictions or other requirements such as
weekly lawn care or maintenance
• Global season adjust (0-200%) allows the user to alter the run time
of all the valves in every program with the push of a button
• Dedicated sensor terminals allow the user to easily connect a
sensor to the controller for maximum water efficiency. A light (LED)
and a message on the LCD indicates when a sensor is active
• Sensor bypass switch allows the user to override an active sensor
• Fuseless, diagnostic circuit breaker identifies a station with valve or
wiring problems and continues to water operable stations
• Valve Test Terminal allows the installer to test the valve wires during
installation to determine the valve that each wire is connected to
• Spacious heavy-duty cabinet with internal junction box provides lots
of room for wiring and eliminates the need to purchase an external
j-box for a clean and professional looking installation. Outdoor
model comes with key-locking cabinet
• Remote Ready connector enables the controller to be used with
Rain Bird’s RM1 and RMX1 multi-function remote control systems
ESP Modular
174
Controllers
www.rainbird.com
2005 – 2006 Catalog
Controllers
• Number of programs: 3 independent
• Automatic Starts: 4 per program, 12 total
• Station timing: 0 to 4 hours for all stations
• Independent programming schedules:
- Custom (user selects the day of the week to water)
- Odd (watering occurs on only odd days of the month minus the
31st and February 29th if a leap year)
- Even (watering occurs on only even days of the month)
- Cyclical (watering occurs between from once a day to once
every 31 days)
• Input required: 120 VAC ± 20%, 60Hz / 230VAC ± 20%, 50Hz /
240VAC ± 20%, 50Hz
• Output: 25.5 VAC 1A
• Surge Protection: Primary input side has built in MOV (metal
oxide varistor) to protect circuitry. Output side has 2 built in
MOVs for each valve station
• Power back-up: Lithium coin-cell battery maintains time and
date while non-volatile memory maintains the schedule
• Multi-valve station capacity: Up to two 24 VAC, 7VA solenoid
valves per station plus a master valve
Dimensions
• Width: 10.7" (27,2 cm)
• Height: 7.7" (19,5 cm)
• Depth: 4.4" (11,2 cm)
Models
• ESP-4Mi: 4 station controller indoor model
• ESP-4M: 4 station controller outdoor model*
• ESP-SM3: 3 station module
*Available in 120VAC, 230VAC and 240VAC models
2005 – 2006 Catalog
www.rainbird.com
Controllers
175
Controllers
Dual Program Hybrid Controllers
ESP Series
4, 6, 8 Stations
Outdoor Controller for Residential and Light Commercial Use
Primary Application
Callbacks become a thing of the past when controllers are as
easy to use as Rain Bird’s ESP Series. Programming steps are
clear and logical. An alphanumeric liquid display guides the way
with helpful word prompts, visible even in bright sunlight.
Flexible scheduling options, dual programming, and water
budgeting help all ESP owners manage water-use with ease.
Features
• ESP: Extra-Simple Programming
• Two independent programs
• System water budgeting from 0% to 200% of programmed time
• Large word-prompting alphanumeric liquid crystal display (LCD)
• Durable, weather-resistant outdoor cabinet with internal
transformer
• Conventional 12-hour AM/PM clock
• Swing-open face panel for easy access to terminal strip, remote
connector and rechargeable battery
• Manual start and station advance
• Master valve/remote pump start circuit
• UL, cUL listed; CE, C-Tick approved
• RASTER™ test enables the controller to diagnose and
troubleshoot field wiring, solenoid, and controller problems
quickly and easily
• Diagnostic self-setting circuit breaker identifies a station with
valve or wire fault and continues to water operable stations,
without a fuse
• Station timing: 0-99 minutes (in 1-minute increments); 0-198 with
water budgeting
• Automatic starts: On any quarter hour, up to 3 per day for each
program; up to 6 per day using dual program capability
• Programming schedule: 2-, 3- and 5-day fixed cycle or 7-day
variable programming cycle selection
• Input required: 120 VAC ± 10%, 60 Hz or 220 V ± 10%, 50 Hz
• Output: 24-26.5 VAC 1.5A
• Surge protection: Primary input side has built-in MOV (metal oxide
varistor) to protect microcircuitry. Output side has 1 built-in MOV for
each valve station. A grounding wire for output surge protection is
provided
• Power failure backup: 9-volt battery maintains program temporarily
and keeps time within 2% accuracy range in case of power outage
(battery included)
• Multi-valve station capacity: Up to two 24 VAC, 7VA solenoid valves
per station, plus a master valve
• Default program: After prolonged power interruption, each station
waters 10 minutes per day beginning 8 hours after power resumes
— once per day for the 7-day custom cycle or on the first day of
the 2-, 3- or 5-day fixed cycle
• Manual operation advance button for semi-automatic start
• Monitor capability: Display indicates active station and counts down
time remaining to operate
Dimensions
• Width: 7 1⁄ 2" (19,1 cm)
• Height: 8 5⁄ 8" (22 cm)
• Depth: 4 1⁄ 2" (11,4 cm)
Models
• ESP-4: 4 stations
• ESP-4-50Hz: 4 stations, 50Hz
ESP-8
176
Controllers
www.rainbird.com
2005 – 2006 Catalog
Controllers
Four Program Hybrid Controller
ESP-LX Plus and LXi Plus Series
6, 8, 12, 16, 20, 24 Stations
Indoor (I) or Outdoor for Residential and Light Commercial Use
Primary Application
Designed for light commercial and residential use, these controllers
offer an extensive array of advanced and easy-to-use features for
professional irrigation control. The controllers’ four independent
programs with four independent day cycle modes will accommodate
a myriad of diverse irrigation requirements, including low volume drip
applications. A key-lock door and a durable cabinet make the
ESP-LX Plus controllers easy to install, operate, and service even in
the most challenging environments.
Features
• ESP: Extra-Simple Programming with self-prompting large
alphanumeric LCD display makes this controller easy to program,
read, and understand
• Four independent programs (A-, B-, C-, and D-drip), with six start
times each, allow mixed irrigation applications in a single controller
• 365-day calendar with leap year intelligence for one-time date and
time setting
• Non-volatile program memory maintains user’s program during
a power outage independent of the battery backup.
• Removable, battery-programmable panel for the convenience of
both programming instruction and programming prior to installation
• Four cycle modes (CUSTOM, CYCLICAL, ODD, or EVEN) selectable
for each program for maximum flexibility
• Event-Day-Off option to set any day of the month as a non-watering
day for all programs accommodates special occasions and special
watering ordinances (with permanent off option for 31st day of the
month)
• Programmable Delay-Between-Stations (0 seconds to 9 hours)
provides time for water well recovery or time for slow-closing valves
to turn off completely.
• Start time stacking prevents hydraulic overload
• Variable test program for system operational testing
• Water budgeting by program from 0 to 300% in 1% increments
makes seasonal adjustments quick and easy
• Programmable rain delay enables system to stay off for specified
period with an auto-restart
• Sensor inputs and override switch with LED indicate when irrigation
is suspended
• Master valve/pump start circuit, programmable by station, for optimal
irrigation control
ESP-16LX Plus
2005 – 2006 Catalog
www.rainbird.com
Controllers
177
Controllers
ESP-LX Plus and LXi Plus Series
Continued
• D-drip program can run simultaneously with program A, B or C
to maximize hydraulic capacity and minimize watering time
• Diagnostic circuit breaker and LED fault indicator identify
electrical shorts, skip shorted stations, and continue irrigation
cycle
• Battery recharging circuit maintains fully charged Ni-Cad backup
battery (included) to keep current time and date during a power
outage
• Surge protection makes the controller reliable and robust under
extreme field conditions
• Heavy-duty 1.25A external, plug-in style transformer on the
ESP-LXi Plus indoor version provides convenient installation
•Includes easy-to-mount, heavy-duty plastic cabinet with keylockable door and swing-out, quick release face panel, as well
as all internal wiring (no junction box needed), for clean-looking,
professional installation
• UL and cUL listed; CE, and C-Tick approved
• Remote Ready connector compatible with Rain Bird’s
Multi-function (RMX-1) Remote Control system
• Rapid Station Test Routine (RASTER™) enables the controller to
diagnose and troubleshoot field wiring and solenoid problems
quickly and easily.
• Special Fuse Circuitry detects and displays when a fuse has
blown
• Station timing: 0 to 12 hours for all stations (0 to 16 hours with
water budgeting); 0 to 120 minutes selectable in 1-minute increments; above 120 minutes selectable in 10-minute increments
• Automatic starts: 6 starts per day for each program, available
on the quarter hour (total of 24 start times)
• Independent program schedule options:
• ODD day watering (per program)
• EVEN day watering (per program)
• CYCLICAL (1 to 31 days, variable per program)
• CUSTOM (weekly schedule variable per program)
178
Controllers
• Input required: 117VAC ± 10%, 60Hz (International models
230VAC ± 10%, 50/60Hz)
• Output: 26.5VAC, 1.5A
• Diagnostic circuit breaker skips and indicates stations with
overloaded circuits and continues to run operable stations
• Overload, backup fuse: 1.5A SLO-BLO
• Battery backup: 9V Ni-Cad rechargeable battery (included) for
programming under battery power and maintaining current time and
date during power outages
• Station Capacity: Up to two 24VAC, 7VA solenoid valves per station
plus a master valve or pump start relay
• Terminal strips for up to #12UF wire
• Electrical surge protection: Primary input side has built-in MOV
(metal oxide varistor) to protect microcircuitry; output side has
two built-in MOVs and one inductor for each valve station
Dimensions
• Width: 9 1⁄ 2" (24,1 cm)
• Height: 101⁄ 4" (26 cm)
• Depth: 4 3⁄ 8" (11,1 cm)
Models
• ESP-6LX Plus: 6 stations, indoor/outdoor*
• ESP-8LXi Plus: 8 stations, indoor
* Also available in 230VAC
www.rainbird.com
2005 – 2006 Catalog
Controllers
Four Program Hybrid Controllers
NEW
ESP-MC Series
8, 12, 16, 24, 28, 32, 36, 40 Stations
28 and 36 Stations
Primary Application
The power of an advanced water-management tool in an easy-touse package. The ESP-MC is a commercial-duty controller for the
basic or sophisticated user. Four programs, a real-time calendar,
Rain Bird’s exclusive Cycle+Soak™ water management software,
and the best customer satisfaction program in the industry,
helping you conserve both water and money.
Features
• ESP: Extra Simple Programming with self-prompting large
alphanumeric LCD display makes this controller easy to program,
read and understand
• 12-hour watering duration for any or all stations to aid in drip
compatibility
• Four independent programs, with eight start times each, allow
mixed irrigation applications in a single controller
• Two master valve/pump start terminals, one programmable by
station, to provide better irrigation control
• All programs can overlap to maximize hydraulic efficiency and
minimize watering time
• 365-day calendar with leap year intelligence for one-time date
and time setting
• Event-Day-Off option to set any day of the month as a nonwatering day for all programs
• Programmable rain delay enables system to stay off for up to 99
days with auto-restart
• Upgradeable to Maxicom2® satellite
• Independent day cycle by program
• Water budget by program provides adjustments from 0 to 300%
in 1% increments (up to a maximum run time of 16 hours)
• Rain Bird’s exclusive Cycle+Soak™ by station allows the total
station run time to be split into usable cycles, minimizing puddling
and runoff
• Programmable Delay-Between-Stations provides time for
water well recovery, or time for slow-closing valves to turn
off completely
• Manual watering by station or program
• Sensor inputs and override switch with LED to indicate when
irrigation is suspended by the sensor
• Non-volatile memory maintains the irrigation schedule for up to
100 years during a power outage
• Lithium battery maintains the time and date for over 10 years
2005 – 2006 Catalog
www.rainbird.com
ESP-MC
ESP-MC-SS
Controllers
179
Controllers
ESP-MC Series
Continued
• Diagnostic circuit breaker identifies electrical shorts, provides
a “FAULT” message on the LCD screen, skips shorted stations,
and continues irrigation cycle
• Rapid Station Test Routine (RASTER™) enables the controller to
diagnose and troubleshoot field wiring and solenoid problems
quickly and easily.
• Mounting plate and mounting bracket provide fast, secure,
vandal-resistant installation
• Surge protection makes the controller reliable and robust under
extreme field conditions
• Quick-connect terminal strip for fast installation
• Universal remote ready: includes pre-installed connectors
for addition of remote products
• Heavy-duty transformer for simultaneous operation of up to
nine 24VAC, 7VA solenoids
• Contamination resistant design for reliable performance
• Removable, battery-programmable front panel for the
convenience of both programming instruction and programming
prior to installation
• Available in 2 enclosures:
• Powder coated wall-mount metal cabinet
• Stainless Steel Pedestal
overloaded circuits
• Power supply overload, backup fuse: 3.0 Amp SLO-BLO
• Battery backup: 9VDC, Ni-Cad rechargeable for programming
under battery power and for maintaining active programin-progress during a power outage
• Heavy-duty electrical surge protection for both input power
and field outputs
• UL Listed; CSA, CE, C-Tick approved
• Station timing: A, B, C, D - 0 to 2 hours in 1-minute increments;
- 2 to 12 hours in 10-minute increments
• Automatic starts: 32 starts total, eight per program per day
• Programming schedule:
• ODD day watering (per program)
• EVEN day watering (per program)
• CYCLICAL (1 to 99 days, variable per program)
• CUSTOM (day-of-the-week by program)
• Test program: Variable 1 to 99 minutes
• Rain Delay: Programmable 1 to 99 days
Models
• ESP-8MC: 8 stations
Dimensions
Steel Wall-mount
• Width: 11 5⁄ 16" (28,7 cm)
• Height: 111⁄ 2" (29,2 cm)
• Depth: 6 1⁄ 2" (16,5 cm)
Stainless Steel Pedestal
• Width: 111⁄ 2" (29,2 cm)
• Height: 30" (75 cm)
• Depth: 111⁄ 2" (29,2 cm)
Optional Features
• Pedestal Mount (PED-DD16)
Note: All models also available in 50Hz
Note: All models also available in a
stainless steel (-SS) pedestal.
• Input required: 117VAC ± 10%, 60Hz
(International models: 230VAC ± 10%, 50Hz)
• Output: 26.5VAC, 2.5A
• Station load capacity: Up to two 24VAC, 7VA solenoid valves
per station plus a master valve or pump start relay
180
Controllers
ESP-MC Quick Connect
Terminal Strip
www.rainbird.com
2005 – 2006 Catalog
Controllers
Seven Program Solid State Controllers
IM Series
12, 16, 20, 24, 28, 32, 36, 40, 44, 48 Stations
Primary Application
Advanced stand-alone irrigation management. The Rain Bird IM is
the most flexible, full featured irrigation management system
available in a stand-alone package. It offers features that maximize
water conservation, it provides the flexibility to manage all aspects
of your changing landscape, and it makes programming and
operation easy. All of these advanced features are packaged in a
reliable controller designed for rugged use and long life.
Features
Programming Flexibility
• Seven grouped programs with up to eight start times each
• Optional independent station control
• Program by volume, ET or time
• 14-day custom, cyclical or odd-even programming
• Standard or looping program start times
• 365-day calendar with leap year intelligence
• All programs are selectable as irrigation, drip or non-irrigation
• 24-hour run time per station: 1 second to 24 hours
• Over 50 user-defined setup options
Water Conservation and Management
• Automatic shutdown when open valves exceed the defined
maximum flow
• Optional programming using evapotranspiration (ET) value to
automatically calculate run times based on weather conditions
• Cycle+Soak™ by station allows total irrigation run time to be split
into usable cycles, minimizing runoff
• Water usage logs based on actual or estimated flows
• Maximum flow limit to prevent hydraulic overload
• Programmable delay between stations and delay between master
valve and station
• Water budget by program provides adjustments from 0-999% in
1% increments
• Water window
• Event-day off
• Rain delay up to 99 days
• Usage log which records your choice of station starts,
programming changes and/or alarm conditions
Installation Flexibility
• 12-48 stations, upgradeable in four-station modules
• 3-12 sensors, switched or pulse inputs, upgradeable in
increments of three
• Three levels of password protection of setup and programming
User-Friendly Programming
• Large 15 line by 53 character backlit LCD display
• Graphics make it simple to view calendars and monitor station
activity
• Projected schedule shows what stations will run and when
• Easy-to-read table shows what happens when changes are made
• Run times programmed in mm:ss or hh:mm
• Convenient copy and paste command
• Operator-selectable languages: English, Spanish and French
• Simultaneous operation of up to eight stations plus three master
valves
• Three master valve terminals are programmable by station
• Up to 12 sensor inputs, pulse or switched sensors, which can be
assigned to cancel or interrupt irrigation by station
• Test programs for each station as well as recording the water
flows and electrical current draw (Amps)
• Pause and resume operations for use during maintenance
• Choice of resuming programs in progress or where interrupted
IM
2005 – 2006 Catalog
www.rainbird.com
Controllers
181
Controllers
IM Series
Continued
IM Controller Support Plans
Primary Application
The Assurance Plan is for users who would like enhanced
technical and hardware support. The premium support solution
gives you priority access to the Assurance Plan’s toll-free hotline
and e-mail address. You will receive quick responses from our
Support Technicians who have the technical skills and irrigation
knowledge to resolve your most challenging issues.
Upgrade Modules and Accessories
• Four-station upgrade module
• Three switched sensor (e.g. rain shutoff) upgrade module
• Three pulse sensor (e.g. flow meter) upgrade module
• 16-station housing and back plane
• 25 - 48 extended station I/O assembly
• Heavy-duty surge protection with both relays and MOVs on each
field wire circuit
• Diagnostic circuit breaker shuts down short circuits while
continuing to run operable stations
• Non-volatile memory maintains the time, date, and the irrigation
schedule for up to 10 years during a power outage.
• Self-contained internal electrical junction box
• Input required: 115 VAC +/- 10%, 60Hz (also available as
230 VAC +/- 10%, 50Hz)
• Output: 26.5 VAC, 3A
• Overload, backup fuse: 3.0 Amp SLO-BLO
• UL, CSA, CE, TUV, NEC Class 2, FCC Class A and C-Tick
certifications
• NEMA-4 rated weatherproof cabinet
Dimensions
The Rain Bird IM is available with up to 48 stations and 12
sensors in one compact cabinet.
• Wall-mount cabinet
• Width: 153⁄4" (40,0 cm);
• Height: 17" (43,2 cm)
• Depth: 83⁄8" (21,3 cm)
Models
• IM-12
• IM-16
• IM-20
• IM-24
• IM-28
•
•
•
•
•
Features
•Toll-Free Support - 5 a.m. to 5 p.m. (PST) normal business days.
Unlimited access to our toll-free priority support network.
Rain Bird’s support engineers are just a toll-free call away to
answer questions and resolve IM Controller issues.
•24-Hour Hardware Replacement - ensures that if your hardware
becomes inoperable, a loaner will be shipped to your site within
24-hours. For International customers, a loaner will be shipped to
an international dispatch point within 24 hours.
•Extended Warranty on the IM Controller begins when your original
warranty period is over.
Models
•Subscription Plans
•IMSP-1YR
•IMSP-3YR
•IMSP-5YR
IM-32
IM-36
IM-40
IM-44
IM-48
Note: All models also available in 50Hz, 230 VAC
Note: Future upgrades will plug into the existing architecture.
182
Controllers
www.rainbird.com
2005 – 2006 Catalog
Controllers
Single-Valve Battery-Operated Controller
EASY RAIN™
For Residential and Light Commercial Use
Primary Application
The Easy Rain™ battery-operated single-valve controller is a
professional system designed to automate irrigation on a site where
no AC power is available. The quick-installation and easy-to-use
design make the Easy Rain the perfect choice for watering isolated
sites, AC restricted or wireless areas, drip zones and greenhouses, and
for repairs, testing, and provisional operation of AC powered irrigation
systems during power interruption.
Features
• Operates with any top-grade 9V alkaline battery for applications with
no AC power supply (Duracell™, Energizer™, etc.)
• Factory pre-wired with a DC latching solenoid in a plastic adapter
which hand-screws onto most Rain Bird valves for quick and easy
out-of-the box installation
• Program module mounts directly on solenoid adapter for easy
installation
• Pre-wired cable, over 20 inches (50,8 cm) long, allows programming
outside of valve box
• One programming knob to access all functions for programming ease
• Choice of 6 calendars and cycles for scheduling flexibility
• Choice of 7 run times for diverse watering requirements
• Soak time (4 hours) between the double cycles (2X) for special terrain
and applications
• Easy-to-use manual start/stop function
• Standby function prevents unnecessary irrigation during rainy weather
• Resin-encased electronic components, silicone-filled cavities,
and waterproof battery compartment with screw-on cap allow
operation even in flooded valve boxes
• Incorporates TBOS™ (formerly UNIK™) technology for field-proven
reliability
• Handy “Cycle Indicator” reminds you of the calendar/cycle selected in
the controller’s program
• Calendar (Cycles): Single cycle every 24 hours (1X 24h); Single cycle
every 48 hours (1X 48h); Single cycle every 72 hours (1X 72h); Double
cycle every 24 hours (2X 24h); Double cycle every 48 hours (2X 48h);
Double cycle every 72 hours (2X 72h)
Note: Double cycle equals full run time, 4-hour soak, full run time again
• Run times: 2, 5, 10, 15, 30, 60, or 90 minutes
Note: Under double cycle (2X) calendar, total watering time is twice the run time for a
maximum of 180 minutes
• Soak time: 4 hours (between double cycles (2x) only)
• Default program: The controller will irrigate for the selected run time
indicated by the programming dial every day starting 8 hours after
battery installation if the controller has been programmed incorrectly.
The default program will only run if the programming dial is positioned
on a run time
• Maximum operating pressure: 150 psi (10 bar)
• Battery life: One year with top-grade alkaline battery (battery not
included)
• Three year warranty
Electrical Characteristics
• Power: 9V alkaline battery (international 6AM6 standard or European
6LR61 standard, for example: Duracell™, Energizer™, etc.)
Dimensions
• Height: 5 1⁄8" (12,8cm)
• Width: 2 1⁄6" (5,5 cm)
• Depth: 3 3⁄4" (9,5 cm)
Model
• EASY RAIN
• Valve capacity: 1
• Valve compatibility: Rain Bird DV, DVF, ASVF, PGA, PEB, PESB, GB,
EFB-CP, BPE and BPES valves
• Start time: Selectable from 0, 2, 4, 6, 8, 10, or 12 hours after battery
installation
EASY RAIN
2005 – 2006 Catalog
www.rainbird.com
EASY RAIN
Controllers
183
Controllers
Three-Program Battery-Operated Controller
NEW
TBOS ™
6 Station
Primary Application
The TBOS battery-operated line of buriable controllers allows the
use of automatic irrigation in the absence of AC power. TBOS is
easy to program, vandal-resistant, and reliable. With a host of
flexible features, the TBOS will meet all your irrigation needs with
only a 9V alkaline battery.
Features
• Ideal for commercial applications, including municipal parks,
street and highway landscape projects and construction projects
• Convenient temporary option for providing uninterrupted irrigation
while repairs are made to an AC-powered system
• 365-day calendar (adjusts for leap year)
• AM/PM or 24-hour display
• Run time from 1 minute to 12 hours in 1-minute increments
• Basic programming (standard mode) includes 3 independent
programs on a 7-day program cycle
• Additional cycles (turbo mode) include even, odd, odd-31 and 1-6
day program cycles for maximum flexibility
• 8 start times per program per day
• Low battery indicator warns of failing batteries in the TBOS field
transmitter or TBOS control module
• Independent station operation allows simultaneous start times or
sequential start times based on system hydraulic capacity
• The TBOS field transmitter has a large Liquid Crystal Display
(LCD) with self-explanatory function icons. Each function is
indicated by an easy-to-understand symbol
• The 7-key keypad is equipped with a “beep” sound to confirm
that a key has been pressed for fast and sure programming
• One TBOS field transmitter programs an unlimited number of
TBOS and UNIK™ Control Modules
• Fully backward compatible – operates in standard mode with
all components of Rain Bird’s UNIK controller line
• Field transmitter and control module have external optical
connectors for easy plug-in
• It is possible to transmit information even if the module is
under water
• TBOS potted latching solenoid is compatible with all Rain Bird
valves in the DV, DVF, ASVF, PGA, PEB, PESB, GB, EFB-CP, BPE
and BPES series
• The TBOS solenoid adapters will adapt the potted latching
solenoid for use in retrofit applications with selected Irritrol®
(Hardie/Richdel) and Buckner® valves or Champion® and
Superior® valve actuators
TBOS Control Module
• Available in 3 models: 1, 2, 4, and 6 stations
• Operates one valve per station
• Station timing: 1 minute to 12 hours in 1-minute increments
with a 365-day calendar. Stations are assigned to a single
program
• Direct rain sensor connection accommodates the Rain Bird®
RSD-BEx Rain Sensor.
• Operates with only one 9V alkaline battery (Energizer™ and
Duracell™ are recommended) type 6AM6 (international
standard) or 6LR61 (European standard): battery not included
• Battery life is one year with a high-quality 9V alkaline battery
• Waterproof case and dual-sealed battery compartment for
reliable operation under water
• Dimensions: 33⁄4 x 51⁄8 x 2 inches (9,5 x 13,0 x 5,3 cm)
• Weight: 17.64 ounces (500 g)
• Maximum wire run between the module and solenoid:
Wire Size (AWG)
Maximum Distance (ft)
Wire Size (mm2)
Maximum Distance (M)
TBOS Control Module
and Field Transmitter
184
Controllers
18
32
0,75
10
16
50
1,5
15
• C-Tick approved
www.rainbird.com
2005 – 2006 Catalog
14
80
2,5
24
Controllers
TBOS™ Accessories
TBOS™ Rain Shut-Off Device
Primary Application
Prevents programmed irrigation on sites with TBOS Control
Modules when a significant amount of natural rainfall makes
watering unnecessary.
TBOS Field Transmitter
• Field transmitter required for programming control module
• Dimensions: 31⁄2 x 71⁄2 x 17⁄8 inches (9,0 x 19,0 x 4,5 cm)
• Weight: 7.05 ounces (200 g)
• Operating temperature: 32° to 140° F (0° to 60° C)
• C-Tick approved
TBOS Potted Latching Solenoid
• Two 18 gauge (0,75 mm2) wires are supplied: 23.6 inches
(60 cm) long
• Fits Rain Bird valves: DV, DVF, ASVF, PGA, PEB, PESB, GB, EFB-CP,
BPE and BPES series
• 150 psi (10 bar) maximum operating pressure
• Dimensions: 13⁄ 8" x 23⁄ 8" x 11⁄ 2" (4,0 cm x 6,0 cm x 4,2 cm)
TBOS Solenoid Adapters
• Easy to install
• Black adapter for plastic valves allows the TBOS potted latching
solenoid to be used with selected Irritrol (Hardie/Richel) and
Buckner valves
• Brown adapter for brass valves allows the TBOS potted latching
solenoid to be used with selected Champion and Superior valve
actuators
Models
• TBOSFTUS: Field Transmitter
• TBOS1CMUS: 1-Station Control Module
• TBOSPSOL: Potted Latching Solenoid
• TBOSADAPP: Solenoid Adapter for plastic valves
• TBOSADAPB: Solenoid Adapter for brass valves
TBOS Potted
Latching Solenoid
2005 – 2006 Catalog
TBOS Solenoid
Adapters
Features
• Measures the moisture level in the site area where it is installed in
sand outside the irrigated area
• Prevents irrigation as soon as the area has sufficient water to meet
plant needs
• Does not interrupt irrigation taking place, but subsequent program
starts are prevented
• Automatic return to normal watering schedule when the soil
moisture level decreases as a result of natural evaporation
• Comes with an easy-to-install ON/OFF switch to allow deactivation
of the rain shut-off device during system maintenance
• ON/OFF switch slides onto the mounting bracket on top of the
TBOS Control Module
• Valve compatibility: operates with valves equipped with the
TBOS Latching Solenoid
• Controller compatibility: operates with TBOS and UNIK™ Control
Modules
• Must be installed outside the irrigated area or in the last irrigated
zone
Dimensions
• Width: 3 1⁄ 7" x 17⁄ 9" x 14⁄ 5" (8,0 x 4,5 x 4,6 cm)
Model
• TBOSRAINSO: Rain Shut-Off Device
TBOS Rain Shut-off Device
www.rainbird.com
Controllers
185
Controllers
Wireless Remote Control
One-Button Sequencing System
For Residential Use
Primary Application
Offers reliable wireless remote control of Rain Bird remote
compatible controllers to allow the operator to advance through
all watering stations or halt any active irrigation.
Features
• Sequencing Command advances through all watering stations for
applications such as installation and startup, customer walkthrough, system maintenance, winterization, and spot watering
• Mounting bracket designed for quick installation and easy
connection
• Pre-programmed for rapid set-up
• Transmitter turns itself off when not in use to extend battery life
• One button with two commands simplifies usage
• Quick-Stop Command terminates any watering or program in
progress
• STX (secure transmission) communication protocol ensures
correct command recognition for maximum security
• Over 1 million randomly assigned transmitter codes reduces the
likelihood of a conflict with a second system
• Rain Bird's RMX-1T Keypad Transmitter provides 999 userprogrammable access codes and may be used to control multiple
systems (sold separately)
• Receivers can be programmed to recognize up to 16 different
One-Button or Keypad transmitter access codes for expanded
versatility
• Receiver connects to Rain Bird remote compatible controllers
with push on connector
• Sturdy water-resistant transmitter housing offers protection from
the harsh outdoor elements
• Belt clip for transmitter is included for carrying convenience
• Sensor bypass allows watering by remote access even when an
active sensor has suspended automatic irrigation (with
ESP-LX Plus only)
• UL, cUL listed; FCC, DOC, C-Tick approved
RM-1
186
Controllers
www.rainbird.com
2005 – 2006 Catalog
Controllers
• Default station run time: 10 minutes
• Receiver mounting options: Indoor or Outdoor
• Sequencing Receiver power: 12VAC from the controller
• One-Button Sequencing Transmitter power: Two 3V lithium cells
(new battery life of up to 3 years)
• Keypad Transmitter power: 9-volt alkaline battery (new battery life
of up to 1 year)
• Surge protection: MOVs protect incoming data line
• RF Range: 300 feet (91 meters) line of sight
• RF Frequency: 315 Mhz
• Compatible controllers: Rain Bird’s ESP-LX Plus and ESP Modular
Models
• RM-1: One-Button Sequencing System
Optional Accessories
• RM-1E: Extended Range Antenna Kit
• RM-1B: Extended Length Cable Bracket
• RM-1B cover: Rubber Cable Bracket Cover
Optional Features
Maximize reception range and placement in a secure
location with:
• Extended length cable bracket - allows receiver placement up to
30 feet (9 meters) from the controller
• Extended range antenna - improves reception range
and can be placed up to 50 feet (15 meters)
from receiver
2005 – 2006 Catalog
www.rainbird.com
Controllers
187
Controllers
Wireless Remote Control
Multi-Function Remote Control System
For Residential Use
Primary Application
Offers reliable wireless remote control of Rain Bird remote
compatible controllers to allow the operator to activate watering
stations for specified run times as well as to activate watering
programs.
Features
• Sequencing Command advances through all watering stations for
applications such as Installation and Start-up, Customer Walk
Through, System Maintenance, Winterization, and Spot Watering
• Remotely start or stop any station without sequencing for direct
station access
• Selectable station remote run times, up to 99 minutes, in one
minute increments provides greater control and versatility
• Remotely start or stop any watering program, including the test
program, for remote program control
• Remote sequencing through stations in watering programs for
easy program check-out
• Quick-Stop Command terminates any watering or program in
progress
• Mounting bracket designed for quick installation, easy connection
• Transmitter turns itself off when not in use to extend battery life
• Sequencing button for quick advance to the next watering station
in the program
• STX communication protocol ensures correct command
recognition for maximum security
• Keypad Transmitter provides 999 user-programmable access
codes for security control
• RMX-1R Receiver compatible with Rain Bird's RM-1 One Button
Transmitter
• Receivers can be programmed to recognize up to 16 different
One-Button or Keypad transmitter access codes for expanded
versatility
• Receiver connects to Rain Bird remote compatible controllers
with push on connector
• Sturdy water-resistant transmitter housing offers protection from
the harsh outdoor elements
RMX-1
188
Controllers
www.rainbird.com
2005 – 2006 Catalog
Controllers
• Pouch with belt clip for Keypad Transmitter is available as an
accessory (sold separately)
• Sensor bypass allows watering by remote access even when an
active sensor has suspended automatic irrigation (with
ESP-LX Plus only)
• CU, cUL listed; FCC, DOC, C-Tick approved
• Default station run time: Fixed 10 minutes for Sequencing
Command; 30 minutes for Station Starts (selectable to
99 minutes)
• Receiver mounting options: Indoor or Outdoor
• Multi-Function Receiver power: 12VAC from the controller
• One-Button Sequencing Transmitter power: Two 3V lithium cells
(new battery life up to 3 years)
• Keypad Transmitter power: 9-volt alkaline battery (new battery
life up to 1 year)
• Surge protection: MOVs protect incoming data
• RF Range: 300 feet (91 meters) line of sight
• RF Frequency: 315 Mhz
• Compatible controllers: Rain Bird’s ESP Modular and
ESP-LX Plus
2005 – 2006 Catalog
Optional Features
Maximize reception range and placement in a secure
location with:
• Extended length cable bracket - allows receiver placement up to
30 feet (9 meters) from the controller
• Extended Range Antenna - allows antenna placement up to 50
feet (15 meters) from the receiver
Models
• RMX-1: Multi-function Remote Control System
Optional Accessories
• RM-1B: Extended Length Cable Bracket
• RM-1E: Extended Range Antenna kit
• RM-1B cover: Rubber Cable Bracket Cover
www.rainbird.com
Controllers
189
Controllers
Wireless Rain/Freeze Sensor
NEW
WRS Series
Primary Application
The Wireless Rain/Freeze Sensor conserves water by disabling a
24VAC sprinkler system when rain is detected or freezing
condition (37°F / 3°C) is approaching. A transmitter unit senses
rainfall and temperature and sends a signal wirelessly to the
receiver unit which is connected to an irrigation controller. This
eliminates the need to run wires from the transmitter back to the
controller. The durable, rugged system is easy to install and test,
making it ideal for both commercial and residential applications.
The superior range of the wireless signal enables attractive,
simple installations.
Features
• 500 foot (150 m) line-of-sight range*
• Multiple rainfall settings from 1⁄8" to 3⁄4" (5-20 mm) are quick and
easy to adjust with just the twist of a dial
• Preset freezing temperature of 37°F / 3°C .
• Easy to program transmitters to work with multiple receivers
• Up to 5 transmitters can be programmed per receiver
• Low power test mode allows a single installer to validate
installation
• Weatherproof receiver can withstand outdoor installation
• Bypass switch allows manual over-ride
• Rugged, easy to mount gutter clip, bracket and 6" (15,2 cm)
extension arm
• Comprehensive status monitoring displays the sensor state
(Watering Suspended; Low Battery; No Signal) or mode (Sensor
Bypass; Test Mode; Program Mode)
• Replaceable, long life batteries in the transmitter
• Loss of signal indication when two consecutive hourly
transmissions are missed
• Interchangeable and programmable receiver/transmitter pairs
• Compatible with virtually all 24VAC controllers (normally open or
normally closed)
• FCC, CE and C-Tick approved
• Three-year warranty
* Wireless devices using radio frequency communications are affected by
location specific conditions. The reported distance is based on ideal line-ofsight testing. Actual range may vary due to atmospheric conditions, terrain or
other forms of interference.
Product Specifications
Transmitter
• Size: 3 x 2 x 9 inches (7,6 x 5,0 x 23,0 cm)
• Batteries: 2 ea. #CR2032
• Wireless frequency: 433.92 MHz
Receiver
• Size: 2 3/4 x 1 1/2 x 9 inches (7,0 x 3,8 x 23,0 cm)
• Operational voltage: 20VAC – 28VAC
Models
• WRFC: Wireless Rain/Freeze Sensor Combo
(Transmitter and Receiver)
• WRFT: Wireless Rain/Freeze Sensor Transmitter
• WRC: Wireless Rain Sensor Combo
• WRT: Wireless Rain Sensor Transmitter
• WSR: Wireless Rain Sensor Receiver
WRFC
190
Controllers
www.rainbird.com
2005 – 2006 Catalog
Controllers
Wireless Rain Sensor
WRS Series
Primary Application
The WRS Wireless Rain Sensor conserves water by disabling a
24VAC sprinkler system when rain is detected. A transmitter unit
senses rainfall and sends a signal wirelessly to the receiver unit
which is connected to an irrigation controller. This eliminates the
need to run wires from the transmitter back to the controller. The
durable, rugged system is easy to install and test, making it ideal
for both commercial and residential applications. The superior
range of the wireless signal enables attractive, simple installations.
Features
• 500 foot (150 m) line-of-sight range*
• Multiple rainfall settings from 1/8" to 3/4" (5-20 mm) are quick
and easy to adjust with just the twist of a dial
• Easy to program transmitters to work with multiple receivers
• Up to 5 transmitters can be programmed per receiver
• Low power test mode allows a single installer to validate
installation
• Weatherproof receiver can withstand outdoor installation
• Bypass switch allows manual over-ride
• Rugged, easy to mount gutter clip, bracket and 6" (15,2 cm)
extension arm
• Comprehensive status monitoring displays the sensor state
(Watering Suspended; Low Battery; No Signal) or mode (Sensor
Bypass; Test Mode; Program Mode)
• Replaceable, long life batteries in the transmitter
• Loss of signal indication when two consecutive hourly
transmissions are missed
• Interchangeable and programmable receiver/transmitter pairs
• Compatible with virtually all 24VAC controllers (normally open
or normally closed)
• FCC, CE and C-Tick approved
• Three-year warranty
Product Specifications
Transmitter
• Size: 3 x 2 x 9 inches (7,6 x 5,0 x 23,0 cm)
• Batteries: 2 ea. #CR2032
• Wireless frequency: 433.92 MHz
Receiver
• Size: 2 3/4 x 1 1/2 x 9 inches (7,0 x 3,8 x 23,0 cm)
• Operational voltage: 20VAC – 28VAC
Models
• WRC: Wireless Rain Sensor Combo
• WRT: Wireless Rain Sensor Transmitter
• WSR: Wireless Rain Sensor Receiver
• WRFC: Wireless Rain/Freeze Sensor Combo
• WRFT: Wireless Rain/Freeze Sensor Transmitter
* Wireless devices using radio frequency communications are affected by
location specific conditions. The reported distance is based on ideal line-ofsight testing. Actual range may vary due to atmospheric conditions, terrain or
other forms of interference.
WRC
2005 – 2006 Catalog
www.rainbird.com
Controllers
191
Controllers
Rain Sensor
Automatic Rain Shutoff
RSD-BEx / RSD-CEx
Rain Check™
Primary Application
Easy to install, durable and visually pleasing rain sensor device
suitable for 24VAC residential and commercial applications. This
high quality product saves water and extends irrigation system life
by automatically measuring precipitation and keeping irrigation
systems from watering in rainy conditions.
Primary Application
The Rain Check is indispensable in all automatic irrigation systems
for residential use. It monitors rainfall levels and automatically
overrides the controller to prevent unnecessary irrigation cycles.
Features
• Multiple rainfall settings from 1⁄8" to 3⁄4" (5-20 mm) are quick and
easy to adjust with just the twist of a dial
• Adjustable vent ring helps control drying time
• High-grade, UV-resistant polymer body resists the elements
• Rugged aluminum bracket and arm extend a full 6" (15,2 cm)
• 25 feet (7,6 m) of UV resistant extension wire (RSD-BEx model
only) offers an easy connection to irrigation controllers
• Works with all popular 24VAC controllers
• UL and cUL listed; CE approved
• Five-year trade warranty
• Input required: low voltage 24VAC (not recommended for use with
high voltage pump start, pump start relay circuits or devices)
• Switch electrical rating: 3A @ 125/250 VAC
• Station load capacity: Up to three 24VAC, 7VA solenoid valves
per station plus one master valve
• Wire: 25' (7,6 m) length of #20, 2 conductor extension wire (RSDBEx model only). Short lead for normally open (N.O.) installations
Dimensions
• Overall Length: 6.5" (16,5 cm); Overall Height: 5.4" (15,7 cm)
• Bracket hole pattern (RSD-BEx model): 1.25" (3,2 cm)
Models
• RSD-BEx (rain sensor w/bracket, extension wire)
• RSD-CEx (rain sensor w/o bracket or extension wire, conduit
mount)
Features
• Works with all 24VAC output controllers for maximum versatility
• Does not change irrigation programs, but automatically interrupts
watering cycle when rainfall exceeds pre-selected level. Automatic
return to normal watering
• Water in rain collector pan evaporates faster than soil moisture to
permit watering if required
• Easy to install with adjustable mounting base
• Collector pan can be removed for cleaning
• Adjustable stainless steel sensing probes offer the flexibility
of triggering the rain shut off with as little as 1⁄ 8" (3,2 mm)
of precipitation or when rainfall reaches or exceeds 1⁄ 2" (12,6 mm)
• UV resistant plastic construction increases operating life in
harsh environments
• Solid-state design provides greater reliability by eliminating micro
switches and thermal devices which may rust and/or wear out
• Input required: none; connects to valve common wire.
• Fuse: 3A
• Multi-valve capacity: Up to three Rain Bird 24VAC solenoid
valves per station
• Not recommended for use with direct acting (non-flow switch) pump
start relays
Dimensions
• Length: 8" maximum (20,3 cm)
• Height 4" maximum (10,2 cm)
• Width: 21⁄ 2" maximum (6,4 cm)
Model
• Rain Check
RSD-BEx
Rain Check
192
Controllers
www.rainbird.com
2005 – 2006 Catalog
Controllers
Moisture Sensor
Pump Start Relays
MS-100
RELAY-100, R-200
Primary Application
Conserves water by automatically disabling an irrigation system
when the soil moisture content is high. Once the moisture level
drops below the user-adjustable setting, the watering cycles will
automatically resume.
Primary Application
Activates pump motors using irrigation controllers. Use the
RELAY-100 for activating pump motors up to 1-1/2 HP and the
R-200 for motors up to 5 HP. Both relays are UL approved!
Features
• Set it and forget it – Automatically shuts off irrigation system when
soil reaches one of eight user-set moisture levels.
• Compatible with nearly all irrigation controllers on the market.
• The carbon rod probes are resistant to corrosion and decay to
ensure maintenance-free monitoring.
• Electrical unit is housed in a corrosion-resistant injection molded
plastic case for durability, and easy installation.
Specifications
• Operational voltage: 20 VAC - 28 VAC
• Dimensions: 6 3⁄8" x 4 3⁄4" x 3" (16,2 x 12,1 x 7,6 cm)
• Compatible with irrigation controllers with or without built-in sensor
inputs
Models
• MS-100 - Moisture Sensor
Features
• NEMA type 3R rainproof (outdoor or indoor mount)
• Pre-installed 2 low voltage and 4 high voltage lead wires
• 6 wire nuts included
• R-200 uses reliable Square D technology
Specifications
Relay-100
•UL approved
• Coil Operating Voltage: 24 VAC
• Contact Rating:
11⁄2 HP at 240 VAC
1 HP at 120 VAC
20 amps at 240 VAC
• Coil Input Rating: 26.5 VAC maximum @ 0.175 amps
R-200
• UL approved
• Coil Operating Voltage: 24 VAC
• Contact Rating:
5 HP at 230 VAC
2 HP at 115 VAC
30 amps at 230 VAC
• Coil Input Rating: 26.7 VAC maximum @ 0.256 amps
Model
• RELAY-100: Pump start relay for up to 11⁄2 HP motors
• R-200: Pump start relay for up to 5 HP motors
MS-100
2005 – 2006 Catalog
R-200
www.rainbird.com
Controllers
193
Controllers
Pump Thermal Shut-Off
Pig Tail
Conduit Body
PTS
PIGTAIL
CB-C, CB-Romex
Primary Application
Primary Application
Use to automatically shut-off
Use with outdoor controllers,
pumps before overheat damage this UL approved pig tail meets
occurs. Protects against lost
most local codes.
prime, pressure switch failure,
Features
closed valves, stuck relays, low
• 6-feet (1,8 m) long
water tables and loose fittings.
• Three 16 gauge stranded
Features
conductor wires
• Mounts in any position
• 90 degree molded plug type
• Heavy duty UL approved
Nema 5-15P
thermostat
• Gray color
• Automatic shutoff and reset
Model
• Use with pump motors up to
• PIGTAIL
2 HP
Specifications
• Automatic 120°F (49°C) shut-off
• Automatic 110°F (43°C) reset
• Wire inline 24/110/220 VAC
• 30 amps max.
194
Features
• Outdoor, wet location use
• Powder-coated die cast
aluminum body, neoprene
gasket
• 1⁄2" (15/21) female threaded
inlets
• Strain relief connector available
Specifications
• UL approved
Model
• CB-C: Conduit Body, Type C
• CB-Romex: Strain relief
connector for conduit body
Model
• PTS
PTS
Primary Application
These Type-C conduit bodies
are 100% aluminum, UL
approved, and packaged all-inone with cover, screws, and
gasket for use in your quality
controller installations.
PIGTAIL
Controllers
CB-C
www.rainbird.com
2005 – 2006 Catalog
Controllers
Basic Digital Multimeter
Auto Ranging Multimeter
TI-DM200
TI-DM400
Primary Application
The basic digital multimeter is used to troubleshoot automated
irrigation control systems, test valve solenoids, locate broken
wires and identify other electrical problems in irrigation systems.
This test instrument comes with an Irrigation Troubleshooting
Guide, a valuable reference for irrigation professionals.
Primary Application
The TI-DM400 is a sophisticated autoranging digital multimeter
used to troubleshoot automated irrigation control systems, test
valve solenoids, locate broken wires and identify other electrical
problems in irrigation systems. This high quality tool has a special
non-contact voltage sensor feature that enables it to check quickly
for voltage without connecting the leads. Comes standard with a
rugged, easy-to-grip rubber impact boot. This test instrument
comes with an Irrigation Troubleshooting Guide, a valuable
reference for irrigation professionals.
Features
• Includes Irrigation Troubleshooting Guide
• AC and DC voltage measurement
• Resistance measurement
• 1.5 volt and 9 volt battery test
• Overload protection
• UL listed
• Built-in stand
• One-year warranty
Features
• Non-contact voltage detection
• Autoranging AC and DC voltage measurement
• Autoranging resistance measurement
• AC and DC current measurement
• Continuity test
• Recessed safety-designed input terminals
• Rugged rubber impact boot
• Data hold
• Overload protection
• UL listed
• Built-in stand
Specifications
• DC Voltage: 0-2/20/200/600VDC
• AC Voltage: 0-200/600VAC
• Resistance: 0-200/2K/20K/200K/20M Ω
• Continuity Test: Sounds at <50 Ω
• Power Supply: One 9 volt battery
Model
• TI-DM200
Specifications
• DC Voltage: 0-200mV/2/20/200/600VDC
• AC Voltage: 0-2/20/200/600VAC
• DC Current: 0-2m/200mA/10ADC
• AC Current: 0-2m/200mA/10AAC
• Resistance: 0-200/2K/20K/200K/2000K/20M Ω
• Diode Test Continuity: Sounds at <1K Ω
Model
• TI-DM400
TM-DM200
2005 – 2006 Catalog
TM-DM400
www.rainbird.com
Controllers
195
Controllers
Wire Sorter
Tone and Probe Kit
TI-WS6
TI-TPK
Primary Application
Designed by an irrigation contractor, this tool is used to identify
which field valve wire goes with which station on a controller. This
is useful when wires have been spliced in the field and as a result
are not the same color at both ends. Allows sorting up to six field
wires at a time. This test instrument comes with an Irrigation
Troubleshooting Guide, a valuable reference for irrigation
professionals.
Primary Application
Tone and Probe Kits are used to troubleshoot irrigation systems that
have broken station wire(s) and to locate a wire within a group of
wires. The Rain Bird TI-TPK Tone and Probe Kit has two
components, the Tone Generator Test Set and the Noise Resistant
Speaker Probe. Includes convenient nylon carrying case. This test
instrument comes with an Irrigation Troubleshooting Guide, a
valuable reference for irrigation professionals.
Features
• Six unique jumper wires to attach to the field wires
• Easy to understand LED indicators on sorter tool
Specifications
• Operating Environment: +14 °F to +120 °F (-10 °C to +50 °C)
• Storage Environment: -4 °F to +140 °F (-20 °C to +60 °C)
Features
• Noise resistant probe – selectable filter
• Multifunction selector switch
• Volume control
• Non-conductive pickup tip
• Tone generator with continuity test feature
• Nylon carrying case
Specifications
• Tone generator: 520-1100 Hz alternating tone
• Frequency identification
• Unfiltered: between 0 and 5000 Hz
• Filtered: tuned to a center frequency of 1000 Hz
• Power supply (probe): One 9 volt battery
• Power supply (tone generator) One 9 volt battery
Model
• TI-WS6
Model
• TI-TPK
TI-TPK
TI-WS6
196
Controllers
www.rainbird.com
2005 – 2006 Catalog
Controllers
Digital Clamp Meter
Electrical Troubleshooting Tools
TI-DSA500
PW-2000, PW-4000
Primary Application
Clamp volt-amp meter provides current reading by encircling a
wire with the snap-around probe. Allows measurements to be
made without disconnecting the field wiring. Ideal for
troubleshooting both irrigation and landscape lighting applications.
Includes convenient nylon carrying case. This test instrument
comes with an Irrigation Troubleshooting Guide, a valuable
reference for irrigation professionals.
Primary Application
These versatile pocket-sized tools are essential for quick and easy
troubleshooting of electronic irrigation systems.
Features
• Snap-around clamp volt-amp meter
• Measures AC current, AC & DC voltage, resistance and continuity
• Electronic overload protection
• Shrouded transformer jaws for safety
• Data hold switch
• Continuity buzzer
• Sleep feature for extended battery life
• Nylon carrying case
• UL listed
Specifications
• DC Volts: 400/600V ± 1.5%
• AC Volts: 400/600V ± 2.0%
• AC Current: 40A/400A ± 2.0%
• Resistance: 400/4000 Ω ± 2.0%
• Operating Environment: +32 °F to +105 °F (0 °C to +40 °C)
• Storage Environment: -4 °F to 140 °F (-20 °C to +60 °C)
• Power supply: Two 1.5 volt AAA batteries
Features
• PW2000
• All-in-one Electronic Troubleshooter Tool
• Self powered – No batteries required
• Pocket-sized dimensions
• Performs the following tests:
• Power check tests
• Blown fuse test
• Wiring tests
• Open valve solenoid test
• Relay coil and wire test
• Valve finding test - Induces audible "chattering" sound to
locate 24 VAC solenoid valves
• PW4000
• Electrical Valve Finding Tool
• Self powered – No batteries required
• Pocket-sized dimensions
• Easy-to-use 2 wire design
• Induces audible "chattering" sound to locate 24 VAC solenoid
valves
• Durable water-resistant case
Specifications
• PW2000 - Operating voltage: 3 to 28 VAC or VDC
• PW4000 - Operating voltage: 24 VAC
Models
• PW2000 - Electrical Troubleshooting Tool
• PW4000 - Electrical Valve Finding Tool
Model
• TI-DSA500
TI-DSA500
PW-2000
2005 – 2006 Catalog
www.rainbird.com
PW-4000
Controllers
197
Controllers
Pedestal Kits
PED-DD16
PED-RCC
Primary Application
Pedestal and installation
hardware for controllers in
deep-drawn metal cabinets.
Fits ESP-MC, ESP-SAT Series
controllers, SBM and CCU.
Primary Application
Pedestal and installation
hardware for the RC-4C, RC-7C,
and RC-1260C.
Features
• Includes all necessary mounting
bolts, nuts, and washers
Specifications
• Material: Epoxy-painted steel
• Field wiring connection:
In controller
Dimensions
• Height: 23 1⁄ 2" (59,7 cm)
• Width: 10 1⁄ 2" (26,7 cm)
• Depth: 5" (12,7 cm)
Features
• Includes all necessary
mounting hardware
Specifications
• Material: Epoxy-painted steel
• Field wiring connection:
In controller
Dimension
• Height: 24" (60,9 cm)
Model
• PED-RCC
Model
• PED-DD16
PED-DD16 shown
with ESP-12MC
198
PED-RCC shown
with RC-7C
Controllers
www.rainbird.com
2005 – 2006 Catalog
Spray Heads
Rotary
Nozzles
Rotors
Impacts
Valves
Controllers
Install Confidence.™™
Install Rain Bird Central Controls.
®
®
Central
Controls
Pump Stations
Xerigation®
Central Controls
Accessories
Resources
& Training
Reference
Central Controls
200
Central Controls
www.rainbird.com
2005 – 2006 Catalog
Central Controls
Major Products
Maxicom2®
Multi-Site Central Control
Single Site Central Control
Two-Wire Decoder System
Features
Computer Programming
Computer Monitoring
Computer Control
Interactive Map Interface
Programming by ET
Automatic ET Adjustment
Flow Management
Flow Monitoring
Search & Eliminate High Flows
High Flow Shutoff
Rain Watch
Rain Shutoff
Cycle & Soak
Hardware
CCU
TWI (ESP-SAT Interface)
SDI/LDI (Decoder Interface)
ESP-Satellite Controller
ESP-Site Satellite
ESP-LX+Site Satellite
ESP-SAT Module Kit
ESP-SITE Module Kit
Field Decoders
Link Radio Kits
Freedom For Central Control
Flow Sensors
Weather Station
Rain Gauge
Anemometer
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
SiteControl
•
•
•
•
•
•
•
•
•
•
•
•
•
Key Features
System Monitoring
System monitoring may consist of many different sensors such as weather
stations, flow meters, rain sensors, and wind sensors. These sensors monitor site conditions and report to the system. The central system automatically responds if any field conditions are outside the pre-defined limits set
by the system operator.
MDC
•
System Control
A central control system allows all actions to be carried out easily and efficiently from the central location. Control actions such as adjusting watering or stopping irrigation in the event of rain or high wind can be automatically accomplished without requiring a technician to visit individual field
controllers. A weather station can be connected to the system to precisely
calculate the amount of water required based on climatic conditions.
•
•
•
•
•
•
•
System Communications
A central control system consists of a central computer, irrigation controllers or decoders, sensors and weather stations, and a communication
system to connect them all. Communications can depend on whether a
computer is located on-site, or if the computer is located remotely.
Communications methods include hardwire, direct-connect, fiber optics,
telephone, cellular, and radio.
•
•
•
•
•
•
•
•
•
•
•
Rain Bird Central Control Systems
Maxicom2®
Maxicom2 by Rain Bird makes irrigation management a simple, accurate,
and labor-efficient task. It’s a central control system that helps you achieve
superior water management effectiveness – for hundreds of sites.
Maxicom2 is ideal for municipalities, school districts, and park and recreation departments.
•
•
•
About Central Control Systems
An irrigation central control system can be defined as a computer system that enables the programming, monitoring and operation of an irrigation system from a central location. Central control systems are
designed to allow a single site (college campus, corporate headquarters)
or set of sites (school district, parks and recreation department) to control all their irrigation from one PC. A central control system can monitor
and automatically adapt controller operation and irrigation run times in
response to conditions in the system and surrounding area (weather,
leaks, etc) as well as parameters defined by the system operator.
2005 – 2006 Catalog
SiteControl
If you need powerful central control but only for a single, large, contiguous
site, SiteControl by Rain Bird provides dynamic map-based control and
instantaneous exchange of information between the field and central control system. Offering both two-wire decoder and field satellite solutions,
SiteControl is a system that offers unmatched features and expandability
and is ideal for college or corporate campuses, housing communities,
cemeteries, and resorts and hotels.
MDC Two-Wire Decoder System
The MDC offers unmatched expandability in an inexpensive system that
provides fast and easy installation. High/low flow shut-off, alarms, sensor
inputs, modular expandability and diagnostic tools are just some of the features of the system. Its programming and monitoring software allows you
to remotely download irrigation schedules from the controller, review system data, make changes, and then upload the new schedule program.
Recommended for strip malls, median strips, apartment complexes and
sites where ease of expansion is critical.
www.rainbird.com
Central Controls
201
Central Controls
Central Control Support Plans
Insurance for Your Central Control System
Primary Application
How do you improve on the smartest, most user friendly central
control system in the industry? Offer a comprehensive service and
support plan that covers the system.
After your central control system is online and running, you may
still have questions about using the system. At times like this, you
want quick help from people who know the answers and can
assist you in a timely and efficient manner to maximize your
system's performance.
Rain Bird, the company that pioneered computer based central
control systems, offers a series of support plans designed to
provide priority technical support, training, and hardware
replacement exclusively for subscribing Rain Bird central control
system users.
Three support plans are offered. Select the coverage plan that best
suits your needs - 5 years, 3 years, or 1 year. All plans offer the
same high priority service.
• Incidence and Other Support - In addition to Telephone Support
on a per incident basis, Rain Bird offers Services including Central
Central programming, database initialization & site mapping
services, weather station service, grounding grid services, installed
system evaluation services, diagnostic troubleshooting and repair
services, and more. We will work with you to meet your needs. As a
Global Support Plan subscriber, you have preferential pricing on our
services. Call us for more information.
Models
Maxicom2 and SiteControl Packages come with one year
support included.
MAXICOM 2 GLOBAL SUPPORT PLAN RENEWALS
(for up to 10 sites)
• GSPMC1YR
• GSPMC3YR
• GSPMC5YR
Features
• Toll-Free Support - 5 a.m. to 5 p.m. (PST) normal business days.
Rain Bird's support engineers are just a toll-free call away to
answer questions and resolve central control issues.
• pcANYWHERE Remote System Diagnostics - allows support
engineers to remotely access your central control system when
issues can not be resolved over the phone.
• Extended Warranty - on Rain Bird central control hardware
begins when your original warranty period is over. The Central
Control Support Plan extended warranty covers the Rain Bird
central controller, central control software, Cluster Control Unit,
Site Satellite Controllers, FREEDOM ™ system repeater, and printer
(when purchased from Rain Bird).
• 24-Hour Hardware Replacement* - ensures that if any Rain Bird
central control hardware component covered under the Central
Control Support Plan warranty becomes inoperable, a loaner will
be shipped to your site within 24 hours.
For additional sites
• GSPCADD1YR
• GSPCADD3YR
• GSPCADD5YR
* See plan for details
MDC SYSTEM GLOBAL SUPPORT PLAN
• GSPMD1YR
• GSPMD3YR
• GSPMD5YR
202
Central Controls
SITECONTROL GLOBAL SUPPORT PLAN RENEWALS
• GSPSC1YR
• GSPSC3YR
• GSPSC5YR
SOFTWARE ONLY SUPPORT PLANS
• GSPCSOFT1
• GSPCSOFT3
• GSPCSOFT5
INCIDENT SUPPORT PLANS
• GSPCPERINC
• GSPCONSITE
www.rainbird.com
2005 – 2006 Catalog
Central Controls
Central Controllers
Maxicom 2 ®
Multi-site central control ideal for large-scale commercial systems.
Primary Application
Maxicom 2 Central Control Systems are designed for wide-ranging
large residence, commercial and industrial applications. Hundreds
of sites and weather sources can be controlled and monitored
from one location through telephone, radio, cellular telephone,
Ethernet, direct-connect (serial or short-haul modem), or fiberoptic communication.
Control Features
• From the Maxicom 2 central controller, irrigation systems at multiple sites can be scheduled for days to water, run times, cyclical
scheduling, linking schedules, sensor starts, cycle and soak
schedules, etc.
• Station operating times can be automatically adjusted in response
to changing daily ET (evapotranspiration) values supplied by a
Rain Bird Weather Station or user input.
• Cycle+Soak™ feature optimizes the watering of poor drainage
sites, slopes, and heavy soil areas. Water is applied at or below
soil intake rates automatically, even during high water-use periods.
• Manual operation of system from central computer or from field
satellite units.
• Operation of lighting systems (such as athletic field lighting), security gates, fountains, pumps, sensors, or other systems can also be
managed from one central Maxicom 2 location.
Monitor Features
• Weather sources can be monitored by Maxicom 2 calculating daily
ET values and automatically adjusting station run times to replace
only the water used.
• “Flo-Watch™” monitors hydraulic conditions in the field, checking
for breaks in system piping, or valve malfunctions. The system will
automatically identify where the problem is located, initiate valve
or mainline shutdown, and send an alarm message identifying
where the problem occurred and the action taken to solve the
problem.
• Schedules can start, advance, pause, or cancel according to sensor input from the field.
• Alarm messages alert the user to problems in the field.
Features:
• Graphical User Interface
• Automated ET
• ET Checkbook™
• Flo-Manager™
• Flo-Watch™
• Cycle+Soak™
• Rain Watch™
• Schedule Audit
• Manual station control
• Irrigation Water Windows
• Control of non-irrigation applications
• Event Calendar Scheduling
• Automatic Pop-up Notes
• Site Maps
• Water usage logs
• Station run time & water cost logs
• Fail-safe redundant back-up systems
• Freedom Remote Control System
• Multiple Communication Types
• Operates with all existing Rain Bird
Central Control Hardware Products
• pcAnywhere32 included
(for tech support)
• 1 year support plan included
Models
• G-Series Central Controller
• L-Series Central Controller
Graphic User
Interface (GUI
Multiple Weather
Source Types
(For central controller specifications,
contact your local Authorized
Rain Bird Maxicom 2 distributor)
Accessories
• DeskJet Printer
• LaserJet Printer
ET Checkbook™
2005 – 2006 Catalog
www.rainbird.com
Central Controls
203
Central Controls
Central Controller Interface
Cluster Control Unit (CCU) Series
Maxicom2® Only
Primary Application
Maxicom 2™ Cluster Control Units (CCU) serve as an interface
between the central controller and field satellites on the
Maxicom 2 system.
Features
• CCU-28 operates up to 28, 24-station satellites, output decoders,
pulse decoders, or sensor decoders
• CCU-6 operates up to 6, 24-station satellites, output decoders,
pulse decoders, or sensor decoders
• LED display that provides current satellite status
• Stores and executes schedule instructions from the central
controller
• Communications activity LEDs show current communications
status.
• Each unit provides either 2-wire or MAXILink™ wireless
communication to satellite controllers
• Anti-rust, corrosion-resistant design
• UL listed
Mounting
• Wall mount: drawn steel, seamless, locking, weatherproof cabinets
• Pedestal: brushed stainless steel with removable front panel
Computer Data Path Options (Central Controller to CCU)
• Telephone modem via dial-tone telephone lines (modem included)
• Telephone modem via cellular telephone system (modem not
included)
• Radio modem via radio (point to point) (RS232 port included)
• Hardwire/direct connection (RS232 port included)
• Fiber optic cable (RS232 port included)
Satellite Data Path Options (CCU to Satellite)
• Hardwire/2-wire path (1500 W loop resistance)
• MAXILink wireless radio path (MAX 2 watt ERP Narrowband)
• Input required: 117 VAC±10% @ .5A 60 Hz or
220/240/260±10% @ .5A 50 Hz
• Output: 26.5 VAC, 60Hz or 50 Hz, .5A
• Circuit breaker: NA
• Autoresettable poly switch .65A open (steady state)
1.3A open (surge)
• Single-point grounding bus bar
Dimensions
• Wall Mount
Width: 115⁄16" (28,7 cm)
Height: 111⁄2" (29,2 cm)
Depth: 61⁄2" (16,5 cm)
• SS Pedestal
Width: 111⁄2" (29,2 cm)
Height: 30" (76,2 cm)
Depth: 111⁄2" (29,2 cm)
Models
• CCU-28-W
• CCU-28-S
• CCU-6-W
• CCU-6-S
220/240 VAC (50 Hz)
• ICCU-28-W
• ICCU-28-S
• ICCU-6-W
• ICCU-6-S
CCU-6-W CCU-28-W
204
Central Controls
www.rainbird.com
2005 – 2006 Catalog
Central Controls
Central Controllers
SiteControl
A Full-Featured State-of-the-Art Commercial Central Control
System for Single Site Applications
Primary Application
SiteControl Central Control Systems are designed for large residence, commercial and industrial applications. One site can be
controlled and monitored from the system with satellites and/or
decoders.
Basic Control Features
• From the SiteControl Central Controller, the irrigation system can
be scheduled for days to water, run times, linking schedules, sensor
starts, cycle and soak schedules, ET sensitized scheduling, etc.
• Interactive map allows for maximum site control yet easy
programming, monitoring and troubleshooting for operator.
• Verify programming down to station level by utilizing the
intuitive dry run feature.
• Manual operation of system from central computer via direct
manual access (DMA).
• Operation of non-irrigation applications such as lighting, security
gates, fountains, pumps, sensors, etc.
Additional Features
Advanced Graphical Mapping
• Maps generated by GPS technology or AutoCAD recreate your site.
• Interactive mapping and on-screen graphics show your complete
site with location of individual rotors. Extensive status reporting is a
click away.
• Map Utilities software module allows you to measure and calculate
areas from your map.
Hybrid system
• Expand your system with the purchase of the hybrid software
module.
• Same system can operate satellites and/or decoders via a
2 wire-path.
Expanded System Capability
• Utilizes the most advanced software development tools in the industry. SiteControl offers excellent performance and software/hardware
compatibility.
• New system architecture is designed to speed performance
utilizing most current software operating system.
• System is modular in nature. Buy only what you need; expand at
a later date.
• Increase wire-path capacity by simply purchasing modules.
Remote System Control
• Take control of your system and operate SiteControl from anywhere
on your site using the Rain Bird FREEDOM System. Available via
digital phone or radio.
Superior Monitoring
• Flo-Graph™ allows visibility of real-time graphics with individual
station information presented in colorful charts.
• Flo-Manager™ balances system demands and maximum capacities
with efficiency helping to lower water demand, reduce system wear
and tear and save energy.
• Cycle + Soak.™ Better control the application of water on slopes
and in areas with poor drainage.
• QuickIRR.™ Quick and easy method to build irrigation schedules
and programs based on your parameters.
• Print Office feature prints all monitor log and site information with a
clean and concise format for easy site monitoring and
troubleshooting.
Smart Weather™
• Designed to take complete advantage of Rain Bird’s most advanced
line of weather stations.
• Track ET rates with a weather station and react to current
weather conditions through logical sequential steps.
• Advanced warning system accepts user-defined sensor thresholds.
System operator is immediately alerted if thresholds are exceeded.
Automatic ET
• Automatically adjust run times in relation to fluctuations in
evapotranspiration values.
2005 – 2006 Catalog
SiteControl
www.rainbird.com
Central Controls
205
Central Controls
TWI Series
SiteControl
Continued
SiteControl Only
Other Features
• Water usage logs
• Station run time logs
• Posted & dry run logs
• ET spreadsheet
• Operates with all existing Rain Bird Central Control satellites
• PC anywhere32 included (for tech support)
• 1 year support plan included
Models
• SCONSAT
• SCONSATL
• SCONDEC
• SCONPLUS
Software Module Options
• Smart Weather
• Automatic ET
• Hybrid Module
• Smart Sensor
• Map Utilities
• Freedom
• 8 Additional Locations
• Additional Wire-Path (2nd)
• Additional Wire-Path (3rd)
• Additional Wire-Path (4th)
• Upgrade from SiteControl to SiteControl Plus
Primary Application
The Two-Wire Interfaces (TWI) serve as an interface between the
central controller and Rain Bird commercial field satellites
(ESP-SAT series) on the SiteControl System.
Features
• TWI operates up to 28 satellites, pulse decoders or sensor decoders
per wire-path.
• TWI comes standard with one wire-path, upgradeable to 4 wirepaths with the purchase of an “additional wire-path” module.
• Available in either 2-wire or MAXILink™ wireless communication to
satellite controllers and sensors.
• UL-Listed
• Wall Mount: drawn steel, seamless, cabinet with hinged front panel
• Computer data path: hardwire
TWI Hardwire
• Output: 2 x 26.5VAC @ 0.9A 60/50Hz or 4 x 26.5VAC @ 0.9A
50/60Hz
• Circuit Breaker: NA (Autoresettable)
TWI Link
• Input required: 120VAC ± 10% @ 1.25A 60/50Hz or
220/230/240VAC ± 10% @ .5A 50/60Hz
• Output: NA
• Circuit Breaker: NA
• Grounding: All TWI’s shall be grounded to a 10-ohm or less
earth ground
Dimensions
• Width: 15 1/2" (39,4 cm)
• Height: 12 1/2" (31,7 cm)
• Depth: 6" (15,2 cm)
Models
• TWISAT
• TWISATL
220/240/260 VAC (50 Hz)
• ITWISAT
• ITWISATL
TWI Series
206
Central Controls
www.rainbird.com
2005 – 2006 Catalog
Central Controls
Decoder Interface Series
SiteControl Only
Primary Application
The Small Decoder Interface (SDI) and Large Decoder Interface (LDI)
serve as an interface between the central controller and Rain Bird
commercial field and sensor decoders (FD-101TURF, FD-102TURF,
FD-202TURF, FD-401TURF, FD-601TURF, SD-210TURF) on the
SiteControl System.
Features
• SDI can interface with up to 200 decoder addresses and can
activate up to 400 solenoids.
• LDI can interface with up to 500 decoder addresses and can
activate up to 1000 solenoids.
• SDI & LDI come standard with 4 wire-paths
• Computer data path: 9-pin serial cable
• Decoder data path: 2-wire
• Wall Mount: heavy-duty, plastic, cabinet with a key-lock door
North America
• Input: 120 VAC ± 10% @ .59A 60Hz
• Output: 24VAC @ 2A 60Hz
• Circuit Breaker: NA (Autoresettable)
• UL listed
International Recommended Specifications
(transformer not supplied )
(model: ISDITURF & ILDITURF)
• Input: 220, 230, 240VAC ± 10% @ 0.36A 50Hz
• Output: 24VAC @ 2A 50Hz
• CE listed
Dimensions (LDI and SDI)
• Width: 9 1/2" (24,1 cm)
• Height: 10 1/4" (26 cm)
• Depth: 4 3/8" (11,1 cm)
Models
• SDITURF (w/ transformer)
• ISDITURF (w/o transformer)
• LDITURF (w/ transformer)
• ILDITURF (w/o transformer)
SDI
(LDI not shown)
2005 – 2006 Catalog
www.rainbird.com
Central Controls
207
Central Controls
Control Systems
MDC Decoder-Based Control System
Primary Application
An alternative to traditional in-field satellite control. Decoders are
essentially simple and reliable switching stations. They work just
like conventional satellites but are buried underground away from
the elements.
Features
• Solid-state design.
• Increase flexibility and confidence with UL listed, indoor/outdoor,
modular MDC controller.
• Program and monitor MDC controller from a PC or laptop.
• Improve aesthetics and reduce costs with buried in-field controls.
• Protect against the elements with completely encapsulated electronic components.
• Utilize less wire than conventional satellite systems.
• Simple two-wire system can be spliced and stored during
installation.
• Pre-coded addressing eliminates confusion associated with
switch-based addressing.
• Reduce chance of damage from animals or vandals using underground “switch boxes”.
Controllers
• Maximum number of decoders: 50/100/150/200 depending on model
selection and/or number of expansion modules.
• Maximum number of simultaneous valves: 10 irrigation valves, 1
non-irrigation valve
• Programs: 10 + 1 auxiliary
• Maximum number of simultaneous programs: 2+1 auxiliary
• Irrigation methods: Steps
• Days: 14, every X day (X=1-14)
• Start times: 6 per program
• Start methods: Day and time start, every X day + first day
• Pausing of programs: Yes
• Run time: 0-999 minutes
• Water Budget: 0-250%
• MV/Pump Control: 1 master valve and 9 booster pumps
• Manual operation: Individual decoders or programs
• Sensors: One direct sensor input: rain or alarm. Using sensor
decoder, up to ten flow sensors can be installed anywhere on the
line.
• Test: Built-in electrical diagnostics
• Monitoring: Active decoders shown with remaining time, all actions
logged in memory. Log has 1500 action capacity.
• Field Transmitter: Optional
• MDC controller includes remote programming and monitoring
software.
MDC-200 Controller
208
Central Controls
Sensor Decoder
www.rainbird.com
2005 – 2006 Catalog
Central Controls
Field Decoders
FD-TURF
1, 2, 4, 6 Addresses
SiteControl and MDC Decoders
Primary Application
•Modem and RS232 communication ports come standard
• Compatible with Rain Bird FREEDOM remote control system.
• Detection, isolation and alarming of high- or low-flow conditions.
• Input voltage: 120V / 60Hz ±10%
• Output voltage: 34Vpp (24V AC)
• Overload protection: Electronic
Models
• MDC-50-200 – Controls up to 50 decoders; expandable up to
200 decoders in increments of 50 modules using MDC/M50D
• MDC-200 – Controls up to 200 decoders
• MDC/M50D – expansion modules for MDC-50-200; maximum 3
additional modules may be used on the MDC-50-200
Accessories
• FT-210/B Field Transmitter for field operation of the system;
includes bag
• FTB-250TURF Field Transmitter Connection Box
• CO-210/CA Socket for Field Transmitter / Cabinet Mounting
• CO-210/EX Socket for Field Transmitter / External Mounting
• CO-210/CO Cover for CO-210/CA and CO-210/EX
• DPU-210 Decoder Programming Unit
Tools
• VM-250 Volt/Ohmmeter for AC/DC with LCD display. 0-600V,
0.1-40 Mohms
• AM-250 Clampmeter for VM-250, 2mA-20A
• Mounting: In valve box or direct burial
• Solenoids:
FD-101TURF: 1 with individual control
FD-102TURF: 1 or 2 simultaneously
FD-202TURF: 1 to 4 simultaneously
FD-401TURF: 1 to 4 with individual control
FD-601TURF: 1 to 6 with individual control
• Environment:
Working range: 32° to 122° F (0° to 50° C)
Storage range: -4° to 158° F (-20 to 70° C)
Humidity: 100%
• Power Draw:
FD-101TURF: 0.5 mA (idle) 18 mA (per active solenoid)
FD-102TURF: 0.5 mA (idle) 18 mA (per active solenoid)
FD-202TURF: 1 mA (idle) 18 mA (per active solenoid)
• Wires:
FD-101TURF: Blue to cable, white to solenoid
FD-102TURF: Blue to cable, white to solenoid
FD-202TURF: Blue to cable, white and brown to solenoids
FD-401TURF: Blue to cable, color-coded to solenoids
FD-601TURF: Blue to cable, color-coded to solenoids
FD-101
2005 – 2006 Catalog
www.rainbird.com
Central Controls
209
Central Controls
FD-TURF
Continued
• Surge Protection: Built-in (FD-401TURF & FD-601TURF only)
• Output Power: Adjustable from controller
• Encapsulation: Fully waterproof
• Address: Pre-coded from factory (i.e., no switches)
• Electrical Input:
Nominal voltage: 34Vpp (24V AC) from 2-wire line
Minimum voltage: 21 Vpp (15V AC)
• Standby Current:
FD-101TURF: 0.5 mA
FD-102TURF: 0.5 mA
FD-202TURF, FD-401TURF & FD-601TURF: 1 mA
• Input Fuse (FD-401TURF & FD-601TURF only): 300-500 mA,
thermal
• Electrical Output:
Max. voltage: 33 Vpp
Max. load:
FD-101TURF: 1 Rain Bird solenoid
FD-102TURF: 2 Rain Bird solenoids
FD-202TURF: 4 Rain Bird Solenoids (two per address)
FD-401TURF: 4 Rain Bird Solenoids (1 per address)
FD-601TURF: 6 Rain Bird solenoids (1 per address)
• Maximum Cable Runs:
14 gauge
Star: 2.4 miles
Loop: 9.6 miles
• Decoder/Solenoid Wires Electrical Resistance:
Max. 3 ohms
210
Central Controls
• Max. Distance Decoder/Solenoids:
Cable length:
14 gauge: 456 feet
• Wiring:
2 x 14-gauge (1.5 mm2) solid copper, double jacketed,
UF insulated type
• Surge Protection: 40 V, 1.5 kW transil
Note: Rain Bird recommends using waterproof connectors for all connections.
Dimensions:
• FD-101TURF: Length: 2.77 in. (70 mm), Diameter: 1.5 in.
(40 mm)
(45 mm)
(50 mm)
(65 mm)
• FD-601TURF: Length: 3.94 in. (100 mm), diameter: 2.56 in.
(65 mm)
Models
• FD-101TURF Field Decoder interfacing signal line and one valve
• FD-102TURF Field Decoder interfacing signal line and valve or one
pair of valves
• FD-202TURF Field Decoder interfacing signal line and 2 valves or
2 pairs of valves
• FD-401TURF Field Decoder interfacing signal line and up to 4
individual valves
• FD-601TURF Field Decoder interfacing signal line and up to 6
individual valves
• LSP-1TURF Line Surge Protection
• SD-210TURF Sensor Decoder interfacing signal line and analog or
digital decoders
• Relay-100 Pump Start Relay. Field decoder is required for operation.
www.rainbird.com
2005 – 2006 Catalog
Central Controls
Field Satellite
ESP-SAT
12, 16, 24, 28, 32, 36, 40 Stations
Maxicom2® and SiteControl
Primary Application
The power of an advanced water-management tool in an easy-touse package. The ESP-SAT is a commercial-duty controller for the
basic or sophisticated user. Four programs, a real-time calendar,
Rain Bird’s exclusive Cycle+Soak ™ water management software,
and the best customer satisfaction program in the industry, helping
you conserve both water and money.
Features (stand-alone operation)
• 12-hour watering duration for any or all stations to aid in drip
compatibility.
• Four programs with eight start times each allow mixed irrigation
applications in a single controller.
• Two master valve terminals, one programmable by station, provide
better control.
• Programs can overlap to maximize hydraulic capacity and minimize
watering time.
time setting.
• Event day off option to set any day of the month as a non-watering
day for all programs.
period with auto-restart.
• Independent day cycle by program.
• Water budget by program provides adjustments from 0-300% in 1%
increments.
• Cycle+Soak by station allows total irrigation run time to be split into
usable cycles, minimizing runoff.
• Manual watering by station or program.
• Sensor override switch with LED to indicate when irrigation is
suspended.
• Non-volatile, 100-year memory holds program, date, and time
during power outages.
• Automatic fault indication identifies electrical shorts, skips shorted
stations, and continues watering remaining program.
• Quick-connect terminal strip speeds installation.
• Universal remote ready: pre-installed connectors for addition of
remote products.
• Heavy-duty transformer for simultaneous operation of up to nine
24 VAC, 7VA solenoids.
• Battery-programmable controller allows for programming prior to
installation.
2005 – 2006 Catalog
www.rainbird.com
ESP-40SAT-2W
Central Controls
211
Central Controls
ESP-SAT
Continued
• When controller is integrated into a central control system,
feature set changes to those listed on page 203.
• Power-coated wall mount steel cabinet
• NEMA-4 rated wall mount plastic cabinet
• Stainless steel pedestal
• Station timing: A, B, C, D: 0 to 2 hours in 1-minute increments;
2 to 12 hours in 10-minute increments
• Programming schedule: 1. ODD day watering per program;
2. EVEN day watering per program 3. CYCLICAL (1 to 99 days,
variable per program; 4. Custom day-of-the-week by program
• Input required: 117 VAC ± 10%, 60Hz
(International models: 230 VAC± 10%, 50Hz)
• Output 26.5 VAC, 2.5A
• Station load capacity: Up to two 24 VAC, 7VA solenoid valves per
station plus a master valve or pump start relay
overloaded circuits
• Battery backup: 9VDC, NiCad rechargeable for programming
under battery power and for maintaining active program-inprogress during a power outage
• Heavy-duty electrical surge protection
• Single-point ground bus bar
Dimensions
• Wall Mount Metal
Width: 115⁄16" (28,7 cm)
Height. 111⁄2" (29,2 cm)
Depth: 6 1⁄2" (16,5 cm)
• SS Pedestal
Width: 111⁄2" (29,2 cm)
Height. 30" (76,2 cm)
Depth: 111⁄2" (29,2 cm)
212
Central Controls
Models
• ESP-12SAT-2W: 12 stations, two wire, metal wall mount
• ESP-12SAT-LW: 12 stations, Link radio, metal wall mount
• ESP-12SAT-2S: 12 stations, two wire, stainless steel pedestal
• ESP-12SAT-LS: 12 stations, Link radio, stainless steel pedestal
Note: All models also available in 50Hz
Note: If LINK communication is to be used between the CCU and the satellites, a RADIO/MODEM
kit must also be specified.
Note: ESP-SAT field satellite controllers require a CCU to connect to the Maxicom2 system.
Note: Two-wire path is a hardwire communication path connecting the ESP-SAT to the CCU.
Note: Link Radio is wireless radio communication connecting the ESP-SAT to a CCU.
Note: 12, 16 & 24 station models occupy 1 channel on CCU. 28, 32, 36 & 40 station models
occupy 2 channels on CCU.
Note: Link Radio communication satellites have 2 sensor inputs.
www.rainbird.com
2005 – 2006 Catalog
Central Controls
Field Satellite
ESP-Site Satellite Series
12, 16, 24, 28, 32, 36, 40 Stations
Maxicom2® Only
Primary Application
The ESP-Site Satellite controller is the most versatile satellite
controller yet. This controller combines the capabilities of the Cluster
Control Unit (CCU) with all the power of an ESP-SAT controller.
Powerful enough for large sites yet flexible for smaller applications.
Features
• Combines the function of a Cluster Control Unit (CCU) with an
ESP-SAT controller
• Can monitor up to 2 Maxicom sensors.
• Stores and executes schedule instructions from the central controller
• Operates up to 40 stations
• Communicates with central computer via telephone, hardwire, radio
or fiber-optic cable
• Available in metal wall mount, stainless steel pedestal, module kit for
existing stainless steel pedestals or upgrade kit for existing ESP-MC
or ESP-SAT controllers
• Four programs with eight start times each allow mixed irrigation
applications in a single controller.
• Two master valve terminals, one programmable by station, provide
better control.
time setting.
• Event day off option to set any day of the month as a non-watering
period with auto-restart.
• Water budget by program provides adjustments from 0-300% in 1%
increments.
• Cycle+Soak™ by station allows total irrigation run time to be split into
usable cycles, minimizing runoff.
• Sensor override switch with LED to indicate when irrigation is
suspended.
• Non-volatile, 100-year memory holds program, date, and time during
power outages.
• Automatic fault indication identifies electrical shorts, skips shorted
stations, and continues watering remaining program.
• Quick-connect terminal strip speeds installation.
• Universal remote ready: pre-installed connectors for addition of
remote products.
• Battery-programmable controller allows for programming prior to
installation.
ESP-24SITE-W
Note: Do not need a CCU to connect to Maxicom 2.
2005 – 2006 Catalog
www.rainbird.com
Central Controls
213
Central Controls
ESP-Site Satellite Series
Continued
• Power-coated wall mount steel cabinet
• Stainless steel pedestal
• Station timing: A, B, C, D: 0 to 2 hours in 1-minute increments;
2 to 12 hours in 10-minute increments
• Programming schedule: 1. ODD day watering per program;
2. EVEN day watering per program 3. CYCLICAL (1 to 99 days,
variable per program; 4. Custom day-of-the-week by program
Computer Data Path Options (Central Controller to ESP-Site
Satellite)
• Telephone modem via dial-tone telephone lines (modem included)
• Telephone modem via cellular telephone system (modem not
included)
• Radio modem via radio (point to point) (RS232 port included)
• Hardwire/direct connection (RS232 port included) - serial cable or
short haul modem
• Fiber optic cable (RS232 port included)
• Ethernet (RS232 port included)
• Input required: 117 VAC ± 10%, 60Hz (International models:
230 VAC± 10%, 50Hz)
station plus a master valve or pump start relay
overloaded circuits
• Battery backup: 9VDC, NiCad rechargeable for programming
under battery power and for maintaining active program-inprogress during a power outage
• Heavy-duty electrical surge protection
• Single-point ground bus bar
214
Central Controls
Dimensions
• Wall Mount Metal
Width: 115⁄16" (28,7 cm)
Height. 111⁄2" (29,2 cm)
Depth: 6 1⁄2" (16,5 cm)
• SS Pedestal
Width: 111⁄2" (29,2 cm)
Height. 30" (76,2 cm)
Depth: 111⁄2" (29,2 cm)
Models
• ESP-12SITE-W: 12 stations, metal wall mount
• ESP-12SITE-S: 12 stations, stainless steel pedestal
Note: All models also available in 230V/50Hz
www.rainbird.com
2005 – 2006 Catalog
Central Controls
Field Satellite
ESP-LX Plus Site Satellite Series
16, 20, 24 Stations
Maxicom2® Only
Primary Application
The ESP-LX Plus Site Satellite provides Maxicom2-based central
control for sites that only require the valve capacity of a single
controller. Powerful enough for large sites yet flexible for smaller
applications.
Features
• Combines the power of a Cluster Control Unit (CCU) with the
capabilities of an ESP-LX Plus controller.
• Stores and executes schedule instructions from the central
controller
• Includes 2 sensor inputs - no decoders required
• Operates up to 24 stations
• Communicates with central controller via telephone, hardwire, radio
or fiber-optic cable
• Available in plastic wall mount or module kit to upgrade existing
ESP-LX Plus controllers
• Four independent programs (A-, B-, C-, and D-drip), with six start
times each.
time setting.
• Non-volatile program memory maintains user’s program during a
power outage independent of the battery backup.
• Removable, battery-programmable panel.
• Four day-cycle modes (CUSTOM, CYCLICAL, ODD, or EVEN)
selectable for each program for maximum flexibility.
• Event-Day-Off option to set any day of the month as a non-watering
• Programmable Delay-Between-Stations provides time for slowclosing valves to turn off completely.
• Start time stacking prevents hydraulic overload.
• Diagnostic circuit breaker and LED fault indicator identify electrical
shorts, skip shorted stations, and continue irrigation cycle.
• Includes easy-to-mount, heavy-duty plastic cabinet with keylockable door and swing-out, quick release face panel, as well as all
120v internal wiring (no junction box needed).
• Rapid Station Test Routine (RASTER) enables the controller to
diagnose and troubleshoot field wiring, solenoid, and controller
problems.
• Special Fuse Circuitry detects and displays when a fuse has blown.
ESPLX24STE
2005 – 2006 Catalog
www.rainbird.com
Central Controls
215
Central Controls
ESP-LX Plus Site Satellite Series
Continued
• Station timing: 0 to 12 hours for all stations (0 to 20 hours with
water budgeting); 0 to 120 minutes selectable in 1-minute
increments; above 120 minutes selectable in 10-minute
increments.
• Automatic starts: 6 starts per day for each program, available on
the quarter hour (total of 24 start times).
• Independent day programming schedule options: 1.ODD day
watering (per program) 2.EVEN day watering (per program)
3.CYCLICAL (1 to 31 days, variable per program) 4.CUSTOM
(weekly schedule variable per program)
Central Controller Data Path
(Central Controller to ESP-LX+ Site Satellite)
• Telephone modem via dial-tone telephone lines
• Telephone modem via cellular telephone system
• Radio modem via radio (point to point)
• Hardwire/direct connection
• Fiber optic cable modem
Central Controls
Modem Interface (SITE) Board Cabinet
• Width: 9 1/2" (24,1 cm)
• Height: 10 1/4" (26 cm)
• Depth: 4 3/8" (11,1 cm)
Models
• ESPLX16STE: 16 Stations
• ESPLX16STM: 16 Stations, Module Kit*
* Module Kit for upgrading existing ESP-LX+ Controllers
• Input required: 117 VAC ± 10%, 60 Hz (International models 230
VAC ± 10%, 50 Hz).
• Output: 26.5 VAC, 1.5A
• Station Capacity: ONE 24 VAC, 7VA solenoid valve per station plus a
master valve or pump start relay
• Heavy-duty electrical surge protection.
216
Dimensions:
ESP-LX Plus Controller Cabinet
• Width: 9 1/2" (24,1 cm)
• Height: 10 1/4" (26 cm)
• Depth: 4 3/8" (11,1 cm)
Note: All models also available in 230V/50 Hz
www.rainbird.com
2005 – 2006 Catalog
Central Controls
Field Satellite
ESP-SAT & ESP-SITE Module Kits
12, 16, 24, 32, 40 Stations
Primary Application
The ESP-SAT and ESP-SITE Module Kits have been designed to
enable ESP-SAT and ESP-SITE controllers to be installed directly
into an existing standard Rain Bird stainless steel pedestal. Ideal
for updating existing ISC, PAR, or SBM controllers.
Note: Will not fit wall mount enclosures
Features
• Stand-alone features identical to the ESP-MC models.
• ESP-SITE compatible with Maxicom 2 only
• ESP-SAT compatible with Maxicom 2 and SiteControl
• Stand Alone operation identical to ESP-MC
• Input required: 117 VAC ±10%, 60Hz
(International models: 230 VAC ±10%, 50Hz)
station (up to 4 stations operating simultaneously) plus a master
valve or pump start relay
overloaded circuits
• Battery backup: 9VDC, NiCad rechargeable for programming under
battery power and for maintaining active program-in-progress
Dimensions
• Width: 9 1/4"
• Length: 10 1/4"
• Depth: 5"
Models
ESP SITE SATELLITE MODULE KITS
• ESP12SITEM – 12 Stations
ESP SATELLITE MODULE KITS FOR SS PEDESTALS
TWO-WIRE COMMUNICATION CCU OR TWI TO SATELLITE
• ESP12MOD2S – 12 Stations
LINK RADIO COMMUNICATION CCU OR TWI TO SATELLITE
• ESP12MODLS – 12 Stations
Note: All models also available in 230V/50Hz
Note: Radio/Modem kist sold separately for Link Radio models
Note: ESP-Sat Field Controllers require either a CCU (Maxicom2) or a
TWI (SiteControl) to connect to the central controller
ESP-SAT-MOD
2005 – 2006 Catalog
www.rainbird.com
ESP-SAT-MOD in SS Pedestal
Central Controls
217
Central Controls
Satellite Accessories
Remote Control System
Link Radio Kits
Freedom for Central Control
Maxicom
Maxicom2®, SiteControl, or MDC
2®
or SiteControl
Primary Application
Link radio/modem kit for use in CCU, TWI-Link, and ESP-SAT-Link
controllers. Each device requires one radio kit.
Features
• Allows communication between CCU or TWI and satellite controllers
without wires.
• Easy installation in CCU, TWI or ESP-SAT-Link controllers.
• Available preprogrammed in Private Business frequencies.
• Special preprogrammed frequencies available.
Models
• RMK406NARR (406-430 MHz - Government only)
• RMK450NARR (450-470 MHz - Commercial band)
License Requirements
• FCC frequency license required
Installation Requirements
• One radio modem kit required at each CCU, TWI, or ESP-SAT-Link
• CCU required for Maxicom2
• TWI-Link required for SiteControl
• Includes hardware for installation in wall-mount or stainless steel
pedestal controllers.
• Antenna required (sold separately)
Primary Application
A remote control system designed specifically for Rain Bird
central control systems. This easy-to-use device can control your
irrigation system from a hand-held radio or telephone.
Features
• Uses standard telephone interface or radio repeater at computer.
• Hand-held remote can be either a cellular telephone or
hand-held radio.
• 2-way talk communication is available with radio system.
• Standard land-line telephones can also control the system.
• Password protected for security.
• Start/stop stations, schedules, or site (rain shutdown)
• One unit covers entire central control system.
Hardware
• Radio System – repeater, hand-held unit, antenna, cables
• Telephone System – DTMF module, power supply, cable
• Input required: 117VAC 60Hz
• Telephone System: dedicated dial-up telephone line
License Requirements
• Telephone System: none
• Radio system: FCC license
Dimensions
• Telephone System
DTMF module: 6" x 7" x 2" (152 mm x 178 mm x 51 mm)
• Radio System
Repeater: 16.38" x 9.63" x 4.50" (416 mm x 245 mm x 114 mm)
Hand-held: 3.0" x 8.0" x 1.5" (76 mm x 203 mm x 38 mm)
Models
• FREEDOMFOR (phone)
• FREERADWSP
(radio, special frequency)
Freedom for Central Control - Radio
218
Central Controls
www.rainbird.com
2005 – 2006 Catalog
Central Controls
Flow Sensors
Flow Sensors
Maxicom2®, SiteControl, and MDC
Primary Application
Reliable and simple flow meters for irrigation use. Rain Bird flow
meters send data to central control or stand-alone control system
for precise and accurate flow sensing.
Features (Sensors)
• Simple six-bladed impeller design
• Designed for outdoor or underground applications
• Available in PVC, brass or stainless steel construction
• Pre-installed in tee or saddle mounted insert versions
Features (Transmitters)
• Reliable solid-state design
• Display or signal-alone versions
• Easy-to-program, menu-driven design
• Programmable from a computer (PT322 only)
• Operates with both MAXILink ™ and two-wire systems
• Mounted in NEMA enclosure (optional in 1502 only)
Models
Sensors
• FS100B: Flow sensor, 1", brass
• FS150P: Flow sensor, 11⁄2", plastic
• FS200P: Flow sensor, 2", plastic
• FS350B: Flow sensor, 3" and higher, brass
• FS350SS: Flow sensor, 3" and higher, stainless steel
Transmitters
• PT322: Pulse transmitter, no read-out
• PT1502: Pulse transmitter, digital read-out
Note: Does not include NEMA-rated cabinet or power supply.
Accessories
• PT322SW: Pulse transmitter software
• PTPWRSUPP: Pulse transmitter power supply for PT1502 and PT322
Operating Specifications (Sensors)
• FSSURGEKIT: Surge protection kit
• Accuracy: ± 1% (full scale)
• FSTINSERT: IR insert for Tee Type Sensors replacement cartridge
• Flow rate: 0.5-30 feet per second
• Pressure: 400 psi (max) on metal models; 100 psi (max) on plastic • NEMACAB: NEMA-rated cabinet for PT1502
models
• Temperature: 221°F (105°C) (max) on metal models; 140°F (60°C)
(max) on plastic models
Electrical Specifications (Transmitters)
• Input required: 9-35 VDC (322 Series); 12-24 VDC (1502 Series)
• Output: 4-20 mA pulse output
• Operating Temp: 32°F-158°F (0°C to 70°C)
• Units: Domestic and International units available on PT1502
Flow Sensors
Dimensions
• PT322: 3.65" x 1.75" x 1.00" (93mm x 44mm x 25mm)
• PT1502: 3.78" x 3.78" x 2.21" (96mm x 96mm x 56mm)
• FS100B: 5.45" x 4.94" x 2.21" (138mm x 126mm x 56mm)
• FS150P: 5.0" x 5.16" x 2.38" (127mm x 131mm x 60mm)
• FS200P: 5.63" x 5.64" x 2.88" (143mm x 143mm x 73mm)
• FS300P: 6.50" x 6.83" x 4.23" (165mm x 173mm x 107mm)
• FS400P: 7.38" x 7.83" x 5.38" (187mm x 199mm x 137mm)
• FS350B/SS: 7.13" x 3"(diameter) (181mm x 76mm (diameter))
Flow Sensor Transmitters
and Accessories
2005 – 2006 Catalog
www.rainbird.com
Central Controls
219
Central Controls
Weather Stations
Rain Gauge
Anemometer
WS PRO Series
RAINGAUGE
ANEMOMETER
Maxicom
Maxicom
Maxicom2® or SiteControl
2®
or SiteControl
Primary Application
Collect and transmit weather data from field locations to the
Rain Bird central control system (Maxicom2 or SiteControl).
Features
• Powerful, internal micro-logger for climatic data collection,
logging and analysis, constant communication with weather
sensors, and storage of 30 days of data.
• Sensors monitor 6 weather ET (evapotranspiration) parameters: air
temperature, solar radiation, relative humidity, wind speed, wind
direction and rainfall.
• Self-diagnostic test mechanisms: internal moisture sensor,
battery voltage level and test port for local sensor check.
• State-of-the-art weather software in the Maxicom 2 central
controller calculates ET values,
stores daily and historic ET data, monitors and displays current
weather conditions, and graphically displays weather parameters.
• Simple-to-service sensors and internal components.
• Sensors located three meters above ground for added
vandal-resistance.
• Functions as an integral part of the Maxicom 2 or SiteControl
central control system.
• Rugged yet lightweight metal construction.
• Automatically integrates into the Maxicom 2 or SiteControl
or SiteControl
2®
Primary Application
Collects rainfall information
from field locations for use
by the Maxicom 2 central
control system.
Primary Application
Measures wind speed
information from field locations
for use by the Maxicom 2
Features
Features
• Accurate wind speed.
• Accurate rain counter switch
counts rainfall in 1/100th inch • Heavy-duty metal mounting
bracket.
increments
Note: Requires PT322 or PT1502
• Heavy-duty metal construction.
pulse transmitter to communi• Mounting bracket.
cate with Maxicom2 or
• Debris screen.
SiteControl systems.
• 4" diameter.
Model
• RAINGAUGE
Model
• ANEMOMETER
Models
• WS-PRO-PH: Telephone
• WS-PRO-PHS: Telephone, Solar Power
• WS-PRO-DC: Direct Connect
WS-PRO
RAINGAUGE
220
Central Controls
www.rainbird.com
ANEMOMETER
2005 – 2006 Catalog
Central Controls
Sensor Decoders
Surge Protection for
Two-Wire Satellite Systems
Sensor-Pulse Decoders
MSP-1
For Maxicom
2®
MGP-1
or SiteControl Two-Wire Satellite Systems
Primary Application
Pulse and Sensor Decoders are used with a Maxicom2 or SiteControl
Satellite system with Two-Wire communications (Link Radio
Satellites do not require decoders). Pulse and Sensor Decoders read
the signals from monitoring devices or sensors and send the information to the central control system for analysis and action.
Features
• Complete feedback system.
• Extends central control system versatility.
• Color-coded wire leads for ease of installation.
• Programmable address codes for individual operation.
• Encapsulated in moisture-and UV-resistant case for use in outdoor
conditions.
Primary Application
Primary Application
Protects central control compo- Provides a mounting location
nents from electrical surges on a for MSP-1 or other grounding
two-wire communication path.
wires directly to a grounding
rod or pipe.
Features
• Can be installed in satellite or
Features
CCU pedestal or underground
• Installed on grounding rod
in conjunction with MGP-1
or pipe.
(Maxicom 2 Grounding Plate).
Model
Model
• MGP-1
• MSP-1
Functions
• Sensor Decoder: Monitors dry contact switches (moisture sensor,
pressure switch, security systems, etc.) for open or closed
conditions and informs the system of switch status.
• Pulse Decoder: Reads pulses from monitoring devices, such as
flow sensors and counting rain guage, and sends the information to
the system for analysis and action.
• Input required: 26 VAC (provided by the 2-wire communication path.
No separate power supply required)
Dimensions
• Top: 3 1⁄4" diameter (8,3 cm); Height: 8" (20,3 cm);
Bottom: 2 1⁄2" diameter (6,4 cm)
Models
• DECSEN Sensor Decoder
• DECPUL Pulse Decoder
Note: All decoders function with the satellite 2-wire communication path only.
They are not required for the
MAXILink™ communication path.
DEC-SEN
2005 – 2006 Catalog
DEC-PUL
www.rainbird.com
MSP-1
MGP-1
Central Controls
221
Central Controls
Decoder Programming Unit
Board Kits
DPU-210
ESP-MIB / ESPSITEU
Interface Board Kit
Primary Application
Decoder Programming Unit
tests and verifies operation of
the MDC or SiteControl field
decoders. Also allows for reprogramming decoder addresses for maximum site set-up
flexibility.
Primary Application
Converts new or existing ESP-MC controllers to Maxicom2® or
SiteControl satellite units, or Maxicom2 Site-Satellites.
Features
• Easy installation into existing ESP-MC controllers.
• Easy wiring with ESP-MC style wire connectors.
• Available in two-wire and MAXILink™ satellite versions.
(Radio/modem kit must be purchased separately.)
• Includes all hardware (including transformer) and cables for
installation in wall-mounted
or pedestal-mounted controllers.
Models
• ESPMIB2: Two-wire data path satellite
• ESPMIBL: MAXILink radio data path satellite
• ESPSITEU: Site satellite (Maxicom2 only)
ESP-MIB-TW
DPU-210
222
Central Controls
www.rainbird.com
2005 – 2006 Catalog
Spray Heads
Rotary
Nozzles
Rotors
Impacts
Install Confidence.
Install Rain Bird Commercial
Pump Stations.
™
™
®
®
Valves
Controllers
Central
Controls
Pump Stations
Xerigation®
Accessories
Commercial
Pump Stations
Resources
& Training
Reference
Single Pump Systems
CRE Series
Primary Application
Wide range of high quality single-pump systems to serve
commercial irrigation pressure boost and suction lift applications.
Industry leading VFD (variable frequency drive) technology and
pump hydraulic efficiencies make these pump stations extremely
energy efficient. Ideal when irrigation system demands vary by
automatically adjusting the pump speed to maintain the desired
water pressure and flow.
Features
• Twice the industry standard warranty with 24 months from
installation or 30 months from date of purchase.
• VFD technology provides quick return on investment and below
industry life-cycle costs, resulting in energy savings of up to 50%
over conventional constant speed pump systems.
• VFD automatically adjusts speed to maintain desired water pressure
as flow varies.
• VFD has no moving parts and eliminates the expensive
maintenance of PRV (pressure regulating valve) systems.
• Pumps with VFD last longer by adjusting workload to meet system
requirements and offer extremely quiet, low vibration operation.
• VFD significantly reduces “water hammer”, which results in less
overall irrigation system stress, wear and tear and ultimately lower
maintenance costs.
• System delivered as a complete package, fully assembled. Includes
stainless steel piping and base, diaphragm tank, shut-off and check
valves, transducers, gauges and power supply
connections.
• Systems fully configured and tested to the customer’s
specified operating requirements prior to leaving the factory.
• Vertical, multi-stage, centrifugal return (CRE) pumps maximize
performance, economy and reliability.
• State-of-the-art hydraulic pump design and laser welding
manufacturing techniques provide industry’s highest pumping
efficiencies of up to 80%.
• Excellent NPSHR characteristics for typical suction lift applications.
• Special low NPSHR impellers available for more demanding suction
lift applications.
• Corrosion resistant stainless steel construction and Tungsten
Carbide bearings ensure trouble-free performance, long life and low
maintenance costs even under harsh operating conditions.
• Computer monitoring safeguards the irrigation circuit against pipe
damage, as well as automatic shutdown under dry run and under
voltage conditions.
• Suction lift kit available.
• Prime maintenance tube for suction lift eliminates the need for
separate priming pump.
• Vertical design provides small footprint.
• Fast on-site repairs with pre-assembled, ready-to-install rebuild
kits.
• Extremely quiet and low vibration operation.
CRE 32 - 3 - 2
Reduced Dia. Stages
2
Flow
m 3/hr
Model
CRE
224
CRE-Series
How to Specify
Stages
3
www.rainbird.com
2005 – 2006 Catalog
• Optional remote control unit (R100) offers additional control
features (automatic head, flow, speed, operating ranges), secure
access (panel lock, manual), data collection (power input, power
consumption, operating hours, set points, faults) and print
functions.
• Ample spacing between motor and pump shaft on 15-60 HP
motors allows for a seal change without removing the motor.
• Pump disassembly is not required to change the cartridge shaft
seal.
• Pump will automatically shutdown in case of pipe line break thus
preventing catastrophic failure.
Model Weights and Horsepower
Pump
Model
CRE 3
CRE 5
CRE 8
CRE16
CRE 32
CRE 45
Operating Range
• Flow Range 0 - 310 GPM, 0 - 70 m3/h, 0 - 20 l/s
• Head Range 0 - 500 ft, 0 - 152 m
• HP Range 1 - 10 hp, .8 - 7.5 kw
• Water Temperature Range 32° - 176° F, 0° - 80° C
• Maximum Working Pressure 232 psi, 16 bars
Ship
Weight
200 - 295
210 - 310
240 - 360
330 - 370
275 - 380
365
Motor
Horsepower
1.0 - 1.5
1.0 - 5.0
1.5 - 7.5
5.0 -10.0
3.0 - 10.0
7.5
Voltage: 1 x 208/230 up to 1.5 H.P. and 3 x 460 for all other models.
• Input Required: 50/60 Hz, 1 Phase 208/230 Volt,
3 Phase 208/230/460 Volt
Dimensions
• Width: 9 1/2" (24,1 cm)
• Height: 21.2" - 52.7" (53,8 - 133,9 cm)
• Depth: 4 3/8" (11,1 cm)
H [m] H [ft]
550
150
CRE Series
60 Hz
500
450
Models
• CRE 3
• CRE 5
• CRE 8
• CRE 16
• CRE 32
• CRE 45
125
400
350
100
300
75
250
0
2005 – 2006 Catalog
0
0
0
CRE 45
CRE 32
50
CRE 8
100
CRE 5
25
150
CRE 3
50
CRE 16
200
25 50 75 100 125 150 175 200 225 250 275 300 325
5 10 15 20 25 30 35 40 45 50 55 60 65 70
www.rainbird.com
Q [GPM]
Q [m3/h]
225
Booster Systems
BP Series
Primary Application
Wide range of high quality single-pump and multi-pump systems
to serve commercial irrigation pressure boost and suction lift
applications. Up to six parallel-connected pumps offers flexible
configurations for diverse and demanding irrigation applications.
Industry leading VFD (variable frequency drive) technology and pump
hydraulic efficiencies make these pump stations extremely energy
efficient. Ideal when irrigation system demands vary by
automatically adjusting the number of pumps required and individual
pump speeds to maintain desired water pressure and flow.
Features
• Twice the industry standard warranty at 24 months from start-up
or 30 months from shipping.
• VFD technology provides quick return on investment through
energy savings of up to 50% over conventional constant speed
pump systems.
• VFD has no moving parts and eliminates the expensive
maintenance of a pressure regulating valve.
• VFD pumps last longer by adjusting workload to meet system
requirements and offer extremely quiet, low vibration operation.
• VFD significantly reduces “water hammer”, which results in less
overall irrigation system stress, wear and tear and ultimately lower
maintenance costs.
• System delivered as a complete package, fully assembled. Includes
stainless steel piping and base, diaphragm tank, shut-off and check
valves, transducers, gauges and power supply connections.
• Systems fully configured and tested to the customer’s
specified operating requirements prior to leaving the factory.
• “Smart” Controller switches the system on/off or regulates the
frequency of up to six parallel-connected pumps maintaining
constant pressure and optimized efficiencies over a wide flow
range.
• Automatic pump start and cascade control rotation ensure evenly
distributed run-time between all pumps, motors and VFDs.
• Monitoring functions for maximum pressure limits safeguard the
irrigation distribution circuit against pipe damage, as well as
automatic shutdown and restart under dry run and under voltage
conditions.
• Stop Function ensures the pump automatically stops when flow
drops below operator selected value. This feature assures the
pump is not subject to overheating and the subsequent risk of shaft
seal damage.
• Multi-pump system offers redundancy and back-up capabilities in
the event of a pump failure.
• State-of-the-art hydraulic pump design and laser welding
manufacturing techniques provide the industry’s highest vertical
multi-stage centrifugal pumping efficiencies of up to 80%.
• Large irrigation areas often require multiple pressure zones. Using
a built-in timer program, the BP Series, with optional PMU 2000
controller, can control up to ten different pressure zones.
• Pre-assembled, ready-to-install rebuild kits including pump shaft,
impellers, chambers and all associated hardware provide for
consistent and timely repairs.
• Corrosion resistant stainless steel construction and Tungsten
Carbide bearings ensure trouble-free performance, long life and
low maintenance costs even under harsh operating conditions.
ME 2 CRE 32 - 3 - 2
Type
ME
226
Flow
m 3/hr
BP-Series
How to Specify
Model
CRE
# Pumps
2
Stages
3
Reduced Dia.
Stages
2
www.rainbird.com
2005 – 2006 Catalog
• Ample spacing between motor and pump shaft on 15-60 HP motors
allows for a seal change without removing the motor.
• Pump disassembly is not required to change the cartridge shaft
seal.
• Unique vertical pump stack design significantly reduces the
footprint over horizontally oriented competitors.
Model Size and Power Rating
Number of
Pumps
1
Operating Range
• Flow Range 0 - 3,800 GPM, 0 - 863 m3/h, 0 - 240 l/s
• Head Range 0 - 500 ft, 0 - 152 m
• HP Range 1 - 50 hp per pump (300 hp total system, 6 pumps)
• .8 - 37 kw per pump (224 kw total system, 6 pumps)
• Water Temperature Range 32° - 176° F, 0° - 80° C
• Maximum Working Pressure 232 psi, 16 o-ring
2
• Input Required: 50/60 Hz, 1 Phase 208/230 Volt, 3 Phase
208/230/460/575 Volt
Dimensions
• Width: 29.8" - 64.2" (11,7 - 25,3 cm)
• Height: 43.0" - 78.0" (16,9 - 30,7 cm)
• Depth: 11.8" - 59" (4,6 - 23,2 cm)
Models
• Unique model assigned to each order
3
H [m] H [ft]
550
150
BP Series
60 Hz
500
450
125
400
350
100
300
75
Pump
Size
CR 3
CR 5
CR 8
CR 16
CR 32
CR 45
CR 64
CR 90
CR 3
CR 5
CR 8
CR 16
CR 16
CR 32
CR 45
CR 64
CR 90
CR 3
CR 5
CR 8
CR 8
CR 16
CR 16
CR 32
CR 45
CR 64
CR 90
HP
Range
1-3
1-5
1.5 - 7.5
5 - 15
5 - 25
7.5 - 30
7.5 - 40
15 - 50
1-3
1-5
1.5 - 7.5
5 - 15
5 - 15
5 - 25
7.5 - 30
7.5 - 40
15 - 50
1-3
1-5
1.5 - 7.5
1.5 - 7.5
5 - 15
5 - 15
5 - 25
7.5 - 30
7.5 - 40
15 - 50
Manifold
Size
1.25" NPT
1.25" NPT
1.5" NPT
2" NPT
2.5" NPT
3" NPT
4" NPT
4" NPT
2" NPT
2" NPT
2.5" NPT
4" ANSI
4" ANSI
4" ANSI
6" ANSI
6" ANSI
6" ANSI
2" NPT
2.5" NPT
3" NPT
3" NPT
4" ANSI
4" ANSI
6" ANSI
6" ANSI
8" ANSI
8" ANSI
250
200
CR 90
CR 64
CR 45
CR 32
100
CR 16
25
150
CR 3
CR 5
CR 8
50
50
0
0
0
0
500
100
1000
200
1500
300
2000
400
2005 – 2006 Catalog
500
2500
600
3000
700
3500
4000
Q [GPM]
800
900
Q [m3/h]
www.rainbird.com
227
Pump Station Enclosure
Pump Station Kit
NEW
Enclosures for Commercial Pump Stations
Primary Application
Suction Lift Kit for Commercial
Pump Stations
Primary Application
Rain Bird enclosures are used by irrigation professionals to mount
and protect pump stations and associated electronic controls. These
enclosures include vandal-resistant features and are available in
many configurations. Enclosures are manufactured in a variety of
materials including high quality stainless steel, marine-grade
aluminum and fiberglass.
Features
• High quality construction is the solution for adverse weather and
environmental problems. These enclosures maintain their integrity
through summer and winter extremes.
• Rain Bird enclosures provide protection against vandalism. The
smooth, natural finishes allow for easy removal of graffiti.
• Stainless steel enclosures are 85% stronger than carbon steel.
The rust proof brushed finish produces a chameleon effect —
providing an unobtrusive quality.
• Door seal and continuous carriage drain channels ensure adverse
weather protection.
• Louvers at the top and bottom of the enclosures provide cross-flow
ventilation. Filter screens deflect errant water spray and protect
against entry of dirt and insects.
• Removable, pre-drilled backboard allows for easy installation of the
controller and related components.
• These enclosures have passed the rigorous testing at Underwriters
Laboratories and have been certified to meet the NEMA 3R rating.
• Optional electrical fans and heating units are available to control
pump station environments within the enclosure.
Rain Bird suction lift kits are used in applications where water
levels are below that of the pump station. Typical suction lift
applications involve pumping water out of a pond, lake, river or wet
well.
Features
• Lightweight, UV resistant High Density Polyethylene (HDPE) pipe.
• Prefabricated pipe assemblies and flanged pipe ends for easy
assembly.
• Optional self cleaning intake basket prevents dirt and algae
build-up that can cause pump failure due to cavitation.
Standard Components
• Vertical flanged Foot Valve with increased-area intake screen.
• Flanged section of HDPE pipe with concentric reducer for pond or
90 degree elbow for wet well suction lift applications.
• Stainless steel flange mounting hardware.
Optional Components
• S pipe configuration
• Float available to keep the suction line just below water surface.
• Self cleaning basket filter
• Up to 10 feet sections of HDPE pipe available for kits up to
100 feet long.
• Re-prime pressure reducing valve (PRV)
Pump Station Enclosure
228
www.rainbird.com
Foot Valve
Self Cleaning Basket Filter
2005 – 2006 Catalog
Spray Heads
Rotary
Nozzles
Rotors
Impacts
Valves
Controllers
Central
Controls
Landscape Drip/Xerigation
Pump Stations
Xerigation®
Accessories
Install Confidence.
Install Rain Bird Landscape Drip.
™
™
®
®
Resources
& Training
Reference
Landscape Drip System Overview
Targeted Watering with Xerigation™
Solutions for Drip irrigation
Rain Bird’s landscape drip / Xerigation™ products are made
Rain Bird’s Xerigation products offer the most solutions for drip
especially for low-volume irrigation systems. By delivering water at
irrigation. The product line consists of:
or near the plants’ root zones, Rain Bird’s landscape drip products
• Emission Devices – page 232
offer targeted watering with the following advantages:
• Landscape Dripline – page 247
• Water efficiency
• Distribution Components – page 250
• Less evaporation
• Control Zone Components – page 257
• No over-spray or run-off
• Tools – page 271
• Only plants are watered, not mulch or dirt
• Versatility
• Optimum growing conditions for healthier plants
• Cost savings
6
6
8
Water Source
8
7
7
1
4
1b
1a
6
1c
9
3
5
2
10
24
22
21
23
1. Control Zone Kit [p. 257]
1a. Valve [p. 263]
1b. Filter [p. 264]
1c. Pressure Regulator [p. 267]
2. Easy Fit Male Adapter [p. 252]
3. Easy Fit Coupling [p. 252]
230
4. Xeriman Tool [p. 271]
5. Xeri-Black Stripe Tubing [p. 251]
6. Xeri-Bug Emitter [p. 232]
7. 1⁄4" Tubing Stake [p. 244]
8. 1⁄4" Tubing [p. 254]
9. 1⁄4" Tee [p. 254]
www.rainbird.com
10. Tie-Down Stake [p. 256]
11. Easy Fit Elbow [p. 252]
12. Diffuser Bug Cap [p. 244]
13. PC Emitter Diffuser Cap [p. 234]
14. PC Module [p. 234]
15. Poly Flex Riser Assembly [p. 245]
2005 – 2006 Catalog
13
18
12
14
7
19
8
8
20
15
2
17
6
11
3
5
29
16
30
5
25
12
6
28
8
29
7
7
27
26
5
8
15
5
29
31
16. B.I.G.I.E Stake [p. 253]
17. 1⁄4" Barb Connector [p. 254]
18. Multi-Port Nozzle [p. 240]
19. Xeri-Pop [p. 241]
20. Xeri-Bubbler [p. 236]
21. Air Relief Valve Kit [p. 250]
2005 – 2006 Catalog
PVC
22. SEB-6X Emitter / Valve Box [p. 256]
23. Landscape Dripline [p. 247]
24. Tubing Cutter [p. 272]
25. Xeri-Bird 8 [p. 240]
26. In-Stem Pressure Regulator [p. 267]
27. EMT-6XERI [p. 246]
www.rainbird.com
28. Xeri-Spray [p. 238]
29. Easy Fit Tee [p. 252]
30. Easy Fit Flush Cap [p. 252]
31. Purple Landscape Dripline [p. 247]
231
Emission Devices
Xeri-Bug™ Emitters
Inlet
Outlet
Emission devices efficiently deliver precise
amounts of water to plant root zones.
Products are available in a variety of flowrates and patterns to meet the water
requirements of various plants and soils.
Primary Application
Ideal for watering the root zones of plants, trees, and container plants.
Xeri-Bugs emit water at rates of 0.5, 1.0, and 2.0 gallons-per-hour
(GPH) which allows soils to absorb water more completely into the
root zones of plants. Xeri-Bugs are an ideal choice for those who
wishing to conserve water or eliminate excessive run-off.
XB-05PC, XB-10PC, XB-20PC
Inlet
Outlet
XB-05PC-1032, XB-10PC-1032, XB-20PC-1032
Outlet
1/2"
FPT
Inlet
XBT-20, XBT-10
XBT - 20PC
Model
Xeri-Bug: 1⁄2" FPT inlet
232
How to Specify
Flow
20 = 2.0 GPH (7,57 l/h)
Features
• Flow-rates from 0.5 to 2.0 GPH (1,89 to 7,57 l/h).
• Pressure-compensating design delivers uniform flow throughout a
wide pressure range (15 to 50 psi; 1,0 to 3,5 bars).
• Available with self-piercing inlet barb to permit one-step emitter
insertion into 1⁄2" or 3⁄4" drip tubing when installed with the XM-Tool.
• Inlet and outlet barb securely retains 1⁄4" distribution tubing
(DT-025 or PT-025).
• Available with 10-32 threaded inlet that easily threads into a polyflex
riser (see page 245).
• Use Xeri-Bugs (barb or 10-32 models) with the Xeri-Bird™ 8 multioutlet device (see page 240).
• Available with 1⁄2" (15/21) FPT inlet that easily threads onto a 1⁄2" PVC
riser.
• Self-flushing action minimizes clogging.
• Made from highly inert materials that are resistant to chemicals.
• Durable plastic construction is UV-resistant.
• Color-code inlet identifies flow rate.
Operating Range
• Flow: 0.5 to 2.0 GPH (1,89 to 7,57 l/h)
• Filtration: 150 to 200 mesh (75 to 100 micron)
Models
• XB-05PC (Blue) Barb inlet; 0.5 GPH (1,89 l/h)
• XB-10PC (Black) Barb inlet; 1.0 GPH (3,79 l/h)
• XB-20PC (Red) Barb inlet; 2.0 GPH (7,57 l/h)
• XB-05PC-1032 (Blue) 10-32 Threaded inlet; 0.5 GPH (1,89 l/h)
• XB-10PC-1032 (Black) 10-32 Threaded inlet; 1.0 GPH (3,79 l/h)
• XB-20PC-1032 (Red) 10-32 Threaded inlet; 2.0 GPH (7,57 l/h)
• XBT-10PC 1⁄2" (15/21) FPT inlet; 1.0 GPH (3,79 l/h)
• XBT-20PC 1⁄2" (15/21) FPT inlet; 2.0 GPH (7,57 l/h)
www.rainbird.com
2005 – 2006 Catalog
Xeri-Bug Emitter Performance
Xeri-Bug Emitter Specifications and Models
Nominal
Flow
GPH
Filtration
Required
mesh
Barb/Blue
Barb/Black
Barb/Red
10-32T/Blue
10-32T/Black
1032T/Red
1/2" FPT/Black
1/2" FPT/Black
0.5
1.0
2.0
0.5
1.0
2.0
1.0
2.0
200
150
150
200
150
150
150
150
Model
Inlet Type/
Inlet color
Nominal
Flow
l/h
Filtration
Required
microns
XB-05PC
XB-10PC
XB-20PC
XB-05PC1032
XB-10PC1032
XB-20PC1032
XBT-10PC
XBT-20PC
Barb/Blue
Barb/Black
Barb/Red
10-32T/Blue
10-32T/Black
1032T/Red
1/2" FPT/Black
1/2" FPT/Black
1,89
3,79
7,57
1,89
3,79
7,57
3,79
7,57
75
100
100
75
100
100
100
100
XB-05PC
XB-10PC
XB-20PC
XB-05PC1032
XB-10PC1032
XB-20PC1032
XBT-10PC
XBT-20PC
2.5
9,46
2
7,57
XB-20
XBT-20
1.5
1
XB-10
XBT-10
XB-05
0.5
0
0
10
20
30
Pressure (psi)
40
50
Flow Rate (l/h)
Inlet Type/
Inlet color
Flow Rate (GPH)
Model
METRIC
XB-20
XBT-20
5,68
3,79
XB-10
XBT-10
XB-05
1,89
0
0
0,7
1,4
2,1
Pressure (bars)
2,8
3,5
METRIC
2005 – 2006 Catalog
www.rainbird.com
233
Emission Devices
Pressure-Compensating Modules
PC-05, PC-07, PC-10
Inlet
Outlet
Features
Pressure-compensating (PC) modules are ideal for watering larger
shrubs and trees and for precisely regulating water flow to
Xeri-Bubblers and Xeri-Sprays.
Features
• Flow-rates from 5 to 24 GPH (18,93 to 90,84 l/h).
• Pressure-compensating design delivers uniform flow throughout a wide
pressure range (10 to 50 psi; 0,7 to 3,5 bars).
• Models with self-piercing inlet barb permit one-step emitter insertion
into 1⁄2" or 3⁄4" drip tubing when installed with the XM-Tool.
• Models with 10-32 threaded inlet easily thread into a polyflex riser
(see page 245).
• Inlet and outlet barbs securely retains 1⁄ 4" distribution tubing
(DT-025 or PT-025).
• Use PC Modules with the Xeri-Bird ™ 8 multi-outlet device (see page 240).
• Durable plastic construction is UV-resistant. Made from highly inert
materials that are resistant to chemicals.
• Color-code outlet identifies flow rate.
PC-12, PC-18, PC-24
PC-05-1032, PC-07-1032, PC-10-1032
Operating Range*
• Flow: 5 to 24 GPH (18,93 to 90,84 l/h)
• Filtration: 100-mesh (150-micron)
* When using a PC module at the end of 1/4" distribution tubing (DT-025 or PT-025) or polyflex
riser (PFR/FRA) use a PC Emitter Diffuser cap to eliminate squirting water.
PC-12-1032, PC-18-1032, PC-24-1032
Models: barb inlet x barb outlet
• PC-05: light brown, 5 GPH (18,93 l/h)
• PC-07: violet, 7 GPH (26,50 l/h)
• PC-10: green, 10 GPH (37,85 l/h)
• PC-12: dark brown, 12 GPH (45,42 l/h)
• PC-18: white, 18 GPH (68,13 l/h)
• PC-24: orange, 24 GPH (90,84 l/h)
PC - 24
Models: 10-32 thread inlet x barb outlet
• PC-05-1032: light brown, 5 GPH (18,93 l/h)
• PC-07-1032: violet, 7 GPH (26,50 l/h)
• PC-10-1032: green, 10 GPH (37,85 l/h)
• PC-12-1032: dark brown, 12 GPH (45,42 l/h)
• PC-18-1032: white, 18 GPH (68,13 l/h)
• PC-24-1032: orange, 24 GPH (90,84 l/h)
Model
PC: Pressure compensating module
234
How to Specify
Flow
24 GPH (90,84 l/h)
PC Diffuser
Models: Emitter Diffuser Caps (see page 244 for complete information)
• PC Diffuser (Black)
• PC-DIFF-PPL (Purple, to designate non-potable water)
www.rainbird.com
2005 – 2006 Catalog
Pressure-Compensating Modules Performance
Pressure-Compensating Module Models
At 15,2 cm Above Finished Grade
5METRIC
° Traject
Model
Inlet Type/
Outlet/Color
Nominal
Flow
GPH
Filtration
Required
mesh
PC-05
PC-07
PC-10
PC-12
PC-18
PC-24
PC-05-1032
PC-07-1032
PC-10-1032
PC-12-1032
PC-18-1032
PC-24-1032
Barb / light brown
Barb / violet
Barb / green
Barb / dark brown
Barb / white
Barb / orange
10-32T / light brown
10-32T / violet
10-32T / green
10-32T / dark brown
10-32T / white
10-32T / orange
5
7
10
12
18
24
5
7
10
12
18
24
100
100
100
100
100
100
100
100
100
100
100
100
Model
Inlet Type/
Outlet/Color
Nominal
Flow
l/h
Filtration
Required
Microns
PC-05
PC-07
PC-10
PC-12
PC-18
PC-24
PC-05-1032
PC-07-1032
PC-10-1032
PC-12-1032
PC-18-1032
PC-24-1032
Barb / light brown
Barb / violet
Barb / green
Barb / dark brown
Barb / white
Barb / orange
10-32T / light brown
10-32T / violet
10-32T / green
10-32T / dark brown
10-32T / white
10-32T / orange
18,93
26,50
37,85
45,42
68,13
90,84
18,93
26,50
37,85
45,42
68,13
90,84
150
150
150
150
150
150
150
150
150
150
150
150
METRIC
2005 – 2006 Catalog
www.rainbird.com
235
Emission Devices
Xeri-Bubblers™
Features
• Adjust flow and radius by turning outer cap.
• Clean by completely unscrewing cap from base unit.
• Ideal for shrub plantings, trees, containers, and flower beds.
• Four convenient installation connections available for design
flexibility: 10-32 self-tapping thread, 1⁄ 2" FPT, 1⁄ 4" barb,
and 5" spike.
Operating Range
• SXB Series Flow: 0 to 13 GPH (0 to 49,21 l/h)
• UXB Series Flow: 0 to 35 GPH (0 to 132,48 l/h)
SXB-180-025 SXB-360-025 UXB-360-025
BARB
Models
• SXB-180-1032: Half-circle, 5 streams, 10-32 thread
• SXB-180-050: Half-circle, 5 streams, 1⁄ 2" FPT
• SXB-180-025: Half-circle, 5 streams, 1⁄ 4" barb
• SXB-180-SPYK: Half-circle, 5 streams, 5" spike
• SXB-360-1032: Full-circle, 8 streams, 10-32 thread
• SXB-360-050: Full-circle, 8 streams, 1⁄ 2" FPT
• SXB-360-025: Full-circle, 8 streams, 1⁄ 4" barb
• SXB-360-SPYK: Full-circle, 8 streams, 5" spike
• UXB-360-1032: Full-circle, umbrella, 10-32 thread
• UXB-360-050: Full-circle, umbrella, 1⁄ 2" FPT
• UXB-360-025: Full-circle, umbrella, 1⁄ 4" barb
• UXB-360-SPYK: Full-circle, umbrella, 5" spike
SXB-180-050 SXB-360-050 UXB-360-050
1⁄2" FPT
SXB-180 SXB-360 UXB-360
10-32
SXB-180-SPYK SXB-360-SPYK UXB-360-SPYK
“SPIKE”
236
www.rainbird.com
2005 – 2006 Catalog
Xeri-Bubbler Performance*
Fully open (approximately 22 clicks)
Pressure
psi
SXB-180
Flow
GPH
Radius of
Throw ft.
SXB-360
Flow
GPH
Radius of
Throw ft.
UXB-360
Flow
GPH
Radius of
Throw ft.
15
8.7
1.2
8.7
0.6
28.5
0.7
20
10.3
1.5
10.3
1.0
31.0
1.1
13.0
Performance
2.0
13.0
1.5
35.0
1.9
30Xeri-Bubbler
METRIC
Pressure
psi
SXB-180
Flow
l/h
Radius of
Throw m.
SXB-360
Flow
l/h
Radius of
Throw m
UXB-360
Flow
l/h
Radius of
Throw m.
15
32,93
0,4
32,93
0,2
107,87
0,2
20
38,99
0,5
38,99
0,3
117,34
0,3
30
49,21
0,6
49,21
0,5
132,48
0,6
* Use a PC Module to precisely regulate the flow of water through a Xeri-Bubbler.
2005 – 2006 Catalog
www.rainbird.com
237
Emission Devices
Xeri-Sprays™ and Misters
Xeri-Spray™ 360° True Spray
Features
• Adjust flow/radius by turning integral ball valve.
• Uniform emission pattern provides excellent distribution.
• 10-32 self-tapping threads fit into 1⁄ 2" x 10-32 adapter
(10-32A); 1800 Xeri-Bubbler™ adapter (XBA-1800); and polyflex
riser (PFR-12).
• Ideal for ground cover, mass plantings, annual flower beds,
and containers.
Features
• True micro-spray with full-circle fan spray pattern.
• Adjust flow/radius by turning outer cap.
• Ideal for mass plantings, ground cover, annual flower beds and
containers.
• Four convenient installation connections for design flexibility:
10-32 self-tapping thread, 1⁄ 2" FPT, 1⁄ 4" barb and 5" spike.
• Easily cleaned by completely unscrewing cap from base unit.
Operating Range
• Flow: 0 to 31 GPH (0 to 117,34 l/h)
• Radius: 0 to 13.4 feet (0 to 4,1 m) full-circle; 0 to 10.6 feet
(0 to 3,2 m) quarter- and half-circle
Operating Range
• Flow: 0 to 24.5 GPH (0 to 92,7 l/h)
• Radius: 0 to 6.7 feet (0 to 2,0 m)
Models
• XS-90: Quarter-circle, spray
• XS-180: Half-circle, spray
• XS-360: Full-circle, stream spray
• 360 Mister
• 360 ADJ Mister
Models
• XS-360TS-1032: 10-32 threads
• XS-360TS-050: 1⁄ 2" FPT
• XS-360TS-025: 1⁄ 4" barb
• XS-360TS-SPYK: 5" spike
XS-360TS-025
360 Mister
360 ADJ Mister
XS-360TS-050
XS-90
238
XS-180
XS-360
XS-360TS-1032
www.rainbird.com
XS-360TS-SPYK
2005 – 2006 Catalog
Xeri-Sprays™ and Misters Performance*
Pressure
psi
Flow
GPH
XS-90
Radius of
Throw ft.
XS-180
Radius of
Throw ft.
XS-360
Radius of
Throw ft.
360 Misters
Radius of
Throw ft.
10
0-16.7
0-6.4
0-6.7
0-9.2
0-1.5
15
0-21.0
0-8.1
0-8.1
0-11.3
0-1.3
20
0-24.5
0-9.4
0-9.5
0-12.9
0-1.5
25
0-28.0
0-9.8
0-10.1
0-13.2
0-1.4
30
0-31.0
0-10.3
0-10.6
0-13.4
0-1.3
Pressure
psi
Flow
l/h
XS-90
Radius of
Throw m.
XS-180
Radius of
Throw m.
XS-360
Radius of
Throw m.
360 Misters
Radius of
Throw m.
0,7
0-63,21
0-2,0
0-2,0
0-2,8
0-0,46
1,0
0-79,49
0-2,5
0-2,5
0-3,4
0-0,40
1,4
0-92,73
0-2,9
0-2,9
0-3,9
0-0,44
1,7
0-105,98
0-3,0
0-3,1
0-4,0
0-0,43
2,1
0-117,34
0-3,1
0-3,2
0-4,1
0-0,40
METRIC
Xeri-Spray 360° True Spray Performance*
METRIC
Pressure
psi
Flow
GPH
Radius of Throw
m.
Pressure
psi
Flow
l/h
Radius of Throw
m.
15
0-17.3
0-4.7
1,0
65,48
0-1,4
20
0-19.8
0-5.6
1,4
79,94
0-1,7
30
0-24.5
0-6.7
2,1
92,73
0-2,0
* Use a PC Module to precisely regulate the flow of water through a Xeri-Spray.
2005 – 2006 Catalog
www.rainbird.com
239
Emission Devices
Multi-Outlet Xeri-Bug ™
Xeri-Bird ™ 8 Multi-Outlet
Emission Device
Features
• Pressure compensating design delivers uniform flow throughout
a wide pressure range (15 to 50 psi; 1,0 to 3,5 bars).
• Six-outlet emitter supplied with one outlet opened. Simply
clip the outlet tips open with snips or clippers for additional
operational ports.
• Barbed outlets retain 1⁄ 4" distribution tubing (DT-025 or PT-025).
• Self-flushing action minimizes clogging.
• Durable, UV-resistant plastic housing.
• Barbed inlet (XB-10-6) inserts into drip tubing with use of
a hole punch tool (EMA-RBPX).
Features
• Threads on to any 1⁄ 2" (15/21) riser and delivers water to
multiple locations for increased system flexibility.
• Each port accepts a Xeri-Bug emitter or PC Module for independent
flows from 0.5 to 24 GPH; 1,89 to 90,84 l/h.
• Integral 200-mesh (75-micron) filter is easily serviceable
from the top.
• Eight bottom-mounted, sure-grip barbed outlets securely retain
1⁄ 4" distribution tubing (DT-025 or PT-025).
• Unique union base nut allows removal of Xeri-Bird™ 8 body
from riser for easy installation of 1⁄ 4" tubing onto outlet ports.
Operating Range
• Flow: 0.5, 1.0 or 2.0 GPH (1,89; 3,79 or 7,57 l/h)
• Filtration: 150-mesh (100-microns)
Operating Range
• Flow: 0 to 24 GPH (0 to 90,84 l/h) per outlet
(or leave port open for higher flow)
Models
• XB-05-6 (barb inlet) Blue
• XBT-05-6 (1⁄ 2"; 15/21 FPT inlet) Blue
• XB-10-6 (barb inlet) Black
• XBT-10-6 (1⁄ 2"; 15/21 FPT inlet) Black
• XB-20-6 (barb inlet) Red
• XBT-20-6 (1⁄ 2"; 15/21 FPT inlet) Red
Models
• XBD-80: Xeri-Bird™ 8 unit (includes 7 removable port plugs)
• XBD-81: Xeri-Bird™ 8 unit with eight 1 GPH (3,79 l/h)
Xeri-Bug (XB-10PC) emitters factory installed
Multi-Outlet Xeri-Bug Emitter Performance
METRIC
2.5
XB-20-6, XBT-20-6
9,46
XB-20-6, XBT-20-6
7,57
2
1.5
XB-10-6, XBT-10-6
5,68
XB-10-6, XBT-10-6
3,79
1
XB-05-6, XBT-05-6
0.5
10
20
30
40
50
Unthread to access 200-mesh
(75-micron) screen
Unthread to access independent
flow ports
XB-05-6, XBT-05-6
1,89
0,7
1,4
2,1
2,8
3,5
Union base nut permits removal from
riser without tangling 1/4" tubing
Optional PRS-050-30 pressure regulator
XB-10-6, XBT-10-6
240
XBD-80
www.rainbird.com
2005 – 2006 Catalog
Emission Devices
Xeri-Pop™ Micro-Spray
Primary Application
The Xeri-Pop™ micro-spray makes it easy to integrate a durable
micro-spray into a low-volume irrigation design. The Xeri-Pop is
also ideal for applications that require flexibility and ease of
installation. They are easy to install and reconfigure making them
ideal for seasonal flower and planting beds.
Features
• The Xeri-Pop can operate with 20 to 50 psi base pressure when
water is supplied via 1⁄4" distribution tubing (DT-025 or PT-025).
• The flexibility of 1⁄4" tubing allows for the Xeri-Pop to be easily
located and relocated as planting conditions dictate.
• A durable, plastic snap-collar secures the 1⁄4" tubing to the outside
of the Xeri-Pop case.
• The Xeri-Pop’s 1⁄4" distribution tubing can readily connect to 1⁄2"
(XBS tubing) or 3⁄4" polyethylene tubing or to a multi-outlet
manifold (EMT-6XERI). Connections to polyethylene tubing are
accomplished with either an SPB-025 1⁄4" self-piercing barb
connector or an XBF2EL 1⁄4" self-piercing barb connector.
• External parts are UV-resistant
Operating Range
• Filtration: Depends on Nozzle used with Xeri-Pop
Models
• XP-400X: 4-inch pop-up
• XP-600X: 6-inch pop-up
Nozzle Options
• Multi-Port Nozzle (designed specifically for the Xeri-Pop micro
spray; see next page)
• 5 Series MPR nozzle (all configurations)
• 5 Series plastic bubbler
• 8 Series MPR nozzle (8H, 8T and 8Q)
1/4" distribution tube snap collar
XP - 600X
1/4" distribution tube inlet
How to Specify
Model
Xeri-Pop
Pop-Up Height
600X = 6" Pop-up
Always install a PCS-010, -020, 030,
or -040 Pressure-Compensating
Screen whenever a 5B Bubbler Nozzle
is installed on a Xeri-Pop.
XP-600X
2005 – 2006 Catalog
www.rainbird.com
241
Emission Devices
Multi Port Nozzles
Features
A Multi-Port nozzle is ideal for watering annual flowers and ground
cover. Its square spray pattern and no-mist performance makes it
an ideal choice for areas near walks and windows where overspray
is undesirable.
Features
• Shipped with either one or two ports open; customize nozzle into
any of five patterns.
• Flat trajectory performance for maximum wind resistance.
• Virtually no-mist from 15 to 70 psi (1,0 to 4,8 bars).
• 30 mesh drop-in screen provides at-the-nozzle filtering and is
required for radius adjustment.
• Stainless steel radius adjustment allows precise control over spray
area and permits full shut-off.
• Uses standard nozzle threads and is compatible with all 1800
Series, Uni-Spray, and Xeri-Pop Series pop-ups.
• Each bag of nozzles includes a punch tool for opening additional
ports.
Models
• MP5SSQ – Spray nozzle, 5 ft (1,5 m) radius, shipped with one
open port
• MP5SSST – Spray nozzle, 5 ft (1,5 m) radius, shipped with two
open ports
• MP2QSS – Stream nozzle, 2 ft (0,6 m) radius, shipped with one
open port
Multi Port nozzle
Spray Nozzle Port Configurations and the Resulting Multi-Port Spray Patterns
A
B
C
D
E
1 Port
Open
2 Ports
Open
2 Opposite
Ports Open
3 Ports
Open
All 4 Ports
Open
MP5S-SST
21.0 GPH
MP5S
21.0 GPH
MP5S-SQ
10.5 GPH
MP5S
31.5 GPH
5'
5'
A
B
5'
5'
D
C
10'
MP5S
42.0 GPH
10'
5'
5'
5'
Dotted lines on B, D and E represent where quadrant borders come together.
Order nozzle with 1 port open as MP5SQ. Specify desired pattern as indicated above.
E
5'
10'
10'
10'
5'
Stream Nozzle Port Configurations and the Resulting Multi-Port Stream Patterns
A
B
C
D
E
1 Port
Open
2 Ports
Open
2 Opposite
Ports Open
3 Ports
Open
All 4 Ports
Open
MP2Q-SS
5 GPH
MP2Q-SS
10 GPH
MP2Q-SS
MP2Q-SS
MP2Q-SS
10 GPH
15 GPH
A
2'
2'
4'
B
2'
C
2'
4'
20 GPH
4'
D
4'
4'
E
4'
Multi Port nozzle Punch Tool
242
www.rainbird.com
2005 – 2006 Catalog
Multi-Port Stream Nozzle Performance
Multi-Port Spray Nozzle Performance
■
▲
■
▲
Nozzle
Pressure Radius
psi
ft.
Flow
GPM
Precip
In/h
Precip
In/h
Nozzle
Pressure Radius
psi
ft.
Flow
GPM
Precip
In/h
Precip
In/h
Full
15
20
25
30
15
20
25
30
15
20
25
30
0.39
0.45
0.51
0.55
0.22
0.25
0.28
0.30
0.11
0.12
0.14
0.15
2.35
2.71
1.96
2.12
2.65
3.01
2.16
2.31
2.65
2.89
2.16
2.31
2.71
3.13
2.27
2.45
3.06
3.47
2.49
2.67
3.06
3.33
2.49
2.67
Full
15
20
25
30
15
20
25
30
15
20
25
30
0.24
0.28
0.30
0.33
0.12
0.14
0.15
0.17
0.05
0.06
0.07
0.08
14.54
11.81
9.55
7.99
14.54
11.81
9.55
7.99
14.54
11.81
9.55
7.99
16.79
13.63
11.03
9.22
16.79
13.63
11.03
9.22
16.79
13.63
11.03
9.22
■
▲
Half
Quarter
4
4
5
5
4
4
5
5
4
4
5
5
METRIC
Half
Quarter
1.25
1.50
1.75
2.00
1.25
1.50
1.75
2.00
1.25
1.50
1.75
2.00
METRIC
■
▲
Nozzle
Pressure
bars
Radius
m
Flow
l/h
Precip
mm/h
Precip
mm/h
Nozzle
Pressure
bars
Radius
m
Flow
l/h
Precip
mm/h
Precip
mm/h
Full
1,0
1,5
2,0
2,1
1,0
1,5
2,0
2,1
1,0
1,5
2,0
2,1
1,2
1,3
1,5
1,5
1,2
1,2
1,5
1,5
1,2
1,2
1,5
1,5
90,0
110,0
120,0
120,0
50,0
60,0
70,0
70,0
25,0
30,0
30,0
30,0
60
61
53
54
67
67
58
59
67
66
58
59
69
70
61
62
78
78
67
68
78
76
67
68
Full
1,0
1,5
2,0
2,1
1,0
1,5
2,0
2,1
1,0
1,5
2,0
2,1
038
046
053
061
038
046
053
061
038
046
053
061
53
69
79
76
26
35
40
39
11
15
19
19
369
277
210
203
369
277
210
203
369
277
210
203
426
320
242
234
426
320
242
234
426
320
242
234
Half
Quarter
Half
Quarter
2005 – 2006 Catalog
www.rainbird.com
243
Emission Devices
1/4"
Tubing
Stake
Features
• Holds distribution tubing and
emitter or Diffuser Bug Cap in
desired location.
• Use only with Rain Bird 1⁄4"
tubing (DT-025 or PT-025)
• Rigid stake makes for easier
installation in hard soils.
Model
• TS-025
1/4"
Tubing
Stake with Cap
Diffuser Bug Cap
Features
Features
• Constructed of UV-resistant
• Barb inlet fits into 1⁄ 4"
plastic material.
distribution tubing (DT-025 or
• Used for holding 1⁄ 4" distribution PT-025).
tubing (DT-025 or PT-025) in
• Flanged shield diffuses water
place at the plant root zone.
to minimize soil erosion at
1
emission point.
• Accepts ⁄4" distribution tubing
from .19 (O.D.) to .256 (O.D.).
• Prevents bugs and other
• Bug cap included.
debris from clogging 1⁄ 4"
• Locking cap holds tubing in
distribution tubing.
place.
Operating Range
Model
• Pressure: 0 to 50 psi
• TS-025WCAP
(0 to 3,5 bars)
Emitter Diffuser Cap
Features
• Cap snaps securely onto PC
Module to create bubbler effect
and prevent wash out
• Designed for quick and easy
installation
• Made of UV-resistant
polyethylene material
Models
• PC Diffuser (Black)
• PC-DIFF-PPL (Purple, to
designate non-potable water)
Models
• DBC-025 (Black)
• DBC-025-PPL (Purple, to
Outlet
Inlet
PC Diffuser
DBC-025
TS-025
TS-025WCAP
DBC-025-PPL
244
www.rainbird.com
PC-DIFF-PPL
2005 – 2006 Catalog
Polyflex Riser/
Adapter and Stake
Assemblies
Features
• Pre-assembly of polyflex riser
adapter and stake saves time
and money when installing a
Xerigation system.
• Use PFR/FRA to install
Xerigation emission devices into
PVC laterals for durable system.
• Use with Xeri-Bugs, PC
Modules, XeriSprays and
XeriBubblers that have 10-32
thread inlets.
• PFR/FRA and PFR/RS models
have a 12" (30,5 cm) polyflex
riser.
• PFR/PFR24 model has a 24"
(61,0 cm) polyflex riser.
• The FRA models have a 1⁄2"
MPT adapter; the RS (riser
stake) is 7" (30,5 cm) in length.
Models
• PFR/FRA
• PFR/FRA24
• PFR/RS
PFR/FRA
12" Polyflex Riser
Flex Riser StakeThreaded
Features
Features
• Accepts Xeri-Bubbler™ and
• Constructed of UV-resistant
Xeri-Spray™ emission devices.
plastic material.
• Constructed of thick-walled,
• Barbed side inlet accepts 1⁄ 4"
high-density polyethylene.
• Can be used in conjunction with PT-025).
a riser stake (RS-025T) for
• 10-32 threaded outlet permits
Xeri-Bug™, PC Module,
easy threading of 12" (30,5 cm)
Xeri-Bubbler™ and Xeri-Spray™ polyflex riser (PFR-12).
applications.
Operating Range
Operating Range
(0 to 3,5 bars)
(1,0 to 3,5 bars)
Model
Model
• RS-025T
• PFR-12
Xeri-Stake™
Features
• Strong, temperature-resistant
polypropylene plastic
construction.
• Protective stop collar properly
positions Xeri-Stake for
installation at finish grade.
• Barbed side inlet accepts
Xeri Black Stripe Tubing (XBS).
Operating Range
(0 to 3,5 bars)
Specifications
• Length: 12" (30,5 cm) including
7" (17,8 cm) spike
• Outlet: 1⁄ 2" (15/21) NPT
• Barb Inlet requires drip tubing
with .580" I.D.
Model
• 700-XS-050
New
PFR/RS
2005 – 2006 Catalog
PFR-12
RS-025T
www.rainbird.com
700-XS-050
245
Distribution ComponentDesign Distribution Component
NEW
6 Outlet Manifold EMT-6XERI
1800 Xeri-Bubbler
Adapter
Features
Features
• 10-32 inlet thread accepts
• 1⁄2" (15/21) FPT inlet threads
Xeri-Bubbler™ or Xeri-Spray™
onto 1/2" riser and provides a
when adapting to a Rain Bird
manifold with six free-flowing
1⁄4" barb outlets.
1800 Series or UNI-Spray ™ popup spray head or shrub adapter.
• Each barb outlet is sealed with
a durable plastic cap.
Operating Range
• Plastic caps remove easily,
allowing for a drip area that can
(1,0 to 3,5 bars)
be customized with up to six
different emission devices.
Model
• Use the EMT-6XERI with Xeri• XBA-1800
Bugs, PC Modules, Xeri-Pops,
Xeri-Sprays, and Xeri-Bubbler.
10-32 Thread
Adapter
In-Stem
200-mesh Filters
Features
Features
• 1⁄ 2" (15/21) FPT inlet screws
• Provides 200-mesh filtration for
onto any 1⁄ 2" (15/21) NPT riser.
protection from debris
• Accepts any Xeri-Bubbler™
• Constructed of polyester welded
or Xeri-Spray™ emission device
to polypropylene frame
• Use in 1⁄2" risers and 1⁄2"
with 10-32 threads.
• UV-resistant plastic construction. threaded multi outlet devices
• Use with Rain Bird 1800 Series
Operating Range
spray heads
(0 to 3,5 bars)
Models
• SRO 050 200x
Model
• 1800 SC 200x
• 10-32A
Operating Range
(1,0 to 3,5 bars)
Model
• EMT-6XERI
EMT-6XERI
246
XBA-1800
10-32A
www.rainbird.com
SRO 050 200x
1800 SC 200x
2005 – 2006 Catalog
Landscape Dripline
Primary Application
Landscape Dripline is the next generation in pressure compensating,
inline emitter tubing delivering unmatched clog-resistance for long
term reliability. It can be used to irrigate ground cover, mixed
plantings, slope plantings and hedge rows.
Operating Range
•Pressure: 8.5-60 psi (0,7 to 4,1 bars)
•Temperature: Up to 100° F (43.3° C) water
Up to 125° F (51.7° C) ambient
•Flow Rates: 0.61 GPH and 0.92 GPH (2,3 l/h and 3,5 l/h)
•Filtration: 120-mesh (125-micron)
Features
•Pressure compensation ensures consistent flow from each inline
Specifications
emitter throughout the entire length of tubing run.
•Outside Diameter: 0.630" (16 mm)
•Choice of flow rates, spacing and coil lengths provides design
•Inside Diameter: 0.540" (13,7 mm)
flexibility for a variety of non-turfgrass applications.
•Wall Thickness: 0.045" (1,1 mm)
• Rain Bird’s patented ADI emitter (Advanced Drip Inline) pressure
compensates by “lengthening” the emitter’s turbulent flow path
instead of reducing the cross-sectional area of the emitter’s flow path.
The result is unsurpassed clog-resistance over the long term.
• Cylindrical shape of Rain Bird’s ADI emitter “welds” to the inner
circumference of the polyethylene tubing, creating a physical barrier
that keeps the emitter cover and silicone wafer securely in place even
when tubing is kinked in the field.
• Cylindrical design of Rain Bird’s ADI emitter provides surface area for
filtration throughout 360° of its outer circumference.
Landscape Dripline
• Dual outlet ports on every Rain Bird inline emitter act in combination
as a micro air relief valve.
• Available in UV-resistant brown and purple (to designate non-potable
water zones)
• Accepts Rain Bird Easy Fit Compression Fittings, 16mm barb insert
fittings and LOC Fittings
• Custom Spacing Available, contact a Rain Bird sales representative for
ADI Emitter
more details
GPM/100' Chart
18"
24"
1.0
1.5
.67
1.0
.50
.75
LD - P - 09 - 12 - 100
2005 – 2006 Catalog
Length of Tubing
100 = 100'
(30,5 m)
500 = 500'
(152,4 m)
250 = 250'
(76,2 m)
Optional
1000 = 1000'
Purple
(304,8 m)
Emitter Spacing
12 = 12" (30,5 cm)
18 = 18" (45,7 cm)
24 = 24" (61,0 cm)
Flow Rate 1K = 1000' (304,8 m)
06 = .61 GPH (2,3 l/h)
09 = .92 GPH (3,5 l/h)
Model
Landscape
Dripline
How to Specify
.6
.9
12"
www.rainbird.com
247
Landscape Dripline
Continued
Landscape Dripline
METRIC
Model
Flow
GPH
Spacing
in.
Coil Length
ft.
Model
Flow
l/h
Spacing
cm
Coil Length
m
LD-06-12-100
LD-06-12-250
LD-06-12-500
LD-06-12-1000
0.61
0.61
0.61
0.61
12
12
12
12
100
250
500
1000
LD-06-12-100
LD-06-12-250
LD-06-12-500
LD-06-12-1000
2,30
2,30
2,30
2,30
30,5
30,5
30,5
30,5
30,5
76,5
152,9
305,8
LD-06-18-100
LD-06-18-250
LD-06-18-500
LD-06-18-1000
0.61
0.61
0.61
0.61
18
18
18
18
100
250
500
1000
LD-06-18-100
LD-06-18-250
LD-06-18-500
LD-06-18-1000
2,30
2,30
2,30
2,30
45,7
45,7
45,7
45,7
30,5
76,5
152,9
305,8
LD-06-24-100
LD-06-24-250
LD-06-24-500
LD-06-24-1000
0.61
0.61
0.61
0.61
24
24
24
24
100
250
500
1000
LD-06-24-100
LD-06-24-250
LD-06-24-500
LD-06-24-1000
2,30
2,30
2,30
2,30
61,0
61,0
61,0
61,0
30,5
76,5
152,9
305,8
LD-09-12-100
LD-09-12-250
LD-09-12-500
LD-09-12-1000
0.92
0.92
0.92
0.92
12
12
12
12
100
250
500
1000
LD-09-12-100
LD-09-12-250
LD-09-12-500
LD-09-12-1000
3,50
3,50
3,50
3,50
30,5
30,5
30,5
30,5
30,5
76,5
152,9
305,8
LD-09-18-100
LD-09-18-250
LD-09-18-500
LD-09-18-1000
0.92
0.92
0.92
0.92
18
18
18
18
100
250
500
1000
LD-09-18-100
LD-09-18-250
LD-09-18-500
LD-09-18-1000
3,50
3,50
3,50
3,50
45,7
45,7
45,7
45,7
30,5
76,5
152,9
305,8
LD-09-24-100
LD-09-24-250
LD-09-24-500
LD-09-24-1000
0.92
0.92
0.92
0.92
24
24
24
24
100
250
500
1000
LD-09-24-100
LD-09-24-250
LD-09-24-500
LD-09-24-1000
3,50
3,50
3,50
3,50
61,0
61,0
61,0
61,0
30,5
76,5
152,9
305,8
LDP06121K
LDP06181K
LDP06241K
LDP09121K
LDP09181K
LDP09241K
0.61
0.61
0.61
0.92
0.92
0.92
12
18
24
12
18
24
1000
1000
1000
1000
1000
1000
LDP06121K
LDP06181K
LDP06241K
LDP09121K
LDP09181K
LDP09241K
2,30
2,30
2,30
3,50
3,50
3,50
30,5
45,7
61,0
30,5
45,7
61,0
305,8
305,8
305,8
305,8
305,8
305,8
248
www.rainbird.com
2005 – 2006 Catalog
Landscape Dripline Maximum Lateral Lengths
Inlet Pressure
psi
Maximum Lateral Length (feet)
12" Spacing
18" Spacing
Nominal Flow (GPH):
Nominal Flow (GPH):
.6
.9
.6
.9
24" Spacing
Nominal Flow (GPH):
.6
.9
15
25
35
45
60
159
252
304
342
392
283
457
558
627
716
130
171
211
236
268
222
359
435
489
558
174
231
289
322
365
214
287
358
399
453
METRIC
Inlet Pressure
bars
Maximum Lateral Length (Meters)
30,5 cm
45,7 cm
Nominal Flow (l/h):
Nominal Flow (l/h):
2,3
3,5
2,3
3,5
61,0 cm
Nominal Flow (l/h):
2,3
3,5
1,0
1,7
2,4
3,1
4,1
48,5
76,8
92,7
104,2
119,5
86,3
139,3
170,1
191,1
218,2
2005 – 2006 Catalog
39,6
52,1
64,3
71,9
81,7
67,7
109,4
132,6
149,0
170,1
53,0
70,4
88,1
98,1
111,0
www.rainbird.com
65,2
87,5
109,1
121,6
138,1
249
Distribution Components
16mm Distribution
Tubing
Distribution Components: Xerigation
tubing, fittings, risers and accessories
deliver water from the control zone to the
emission devices.
Landscape Dripline
Insert Fittings
Features
Features
• Attractive brown color to match
• Co-extruded from the finest linear, low-density, UV-resistant
landscape and Landscape
polyethylene resin materials.
Dripline inline emitter tubing
• Attractive brown outer color to match landscape and Landscape
• Compatible with Landscape
Dripline in-line emitter tubing
Dripline (I.D.: 0.54"; O.D.: 0.63")
• Compatible with Landscape Dripline (I.D.: 0.54"; O.D.: 0.63")
• Accepts Rain Bird Easy Fit Compression Fittings, 16mm barb insert and 16mm Distribution Tubing
fittings and LOC fittings.
Models
• LD16CPLG: Barb x Barb Coupling
Models
• LD16ELB: Barb x Barb Ell
• LD 16mm 00-100
• LD16TEE: Barb x Barb Tee
• LD 16mm 00-500
• LD16STK: 7 3⁄4" Barbed Tubing
Tubing Friction Loss Characteristics
Stake Plastic
O.D. .630" I.D. .540"
METRIC
O.D. 16 mm I.D. 13,7 mm
Flow
GPM
Velocity
fps
Loss
psi
Flow
m3⁄h
Flow
l/h
Velocity Loss
m/s
bars
0.50
1.00
1.50
2.00
2.50
3.00
3.50
4.00
4.50
5.00
5.50
6.00
0.70
1.40
2.10
2.80
3.50
4.20
4.90
5.60
6.30
7.00
7.70
8.40
0.27
0.97
2.06
3.50
5.29
7.42
9.87
2.64
15.72
19.11
22.80
26.78
0,11
0,23
0,34
0,45
0,57
0,68
0,79
0,91
1,02
1,14
1,25
1,36
113,56
227,12
340,69
454,25
567,81
681,37
794,94
908,50
1022,06
1135,62
1249,19
1362,75
0,21
0,43
0,64
0,85
1,07
1,28
1,49
1,71
1,92
2,13
2,35
2,56
psi Loss Per 100 Feet of Pipe (psi/100ft.) C=140
Air/Vacuum
Relief Valve
Primary Application
To ensure optimal performance
of sub-surface installation,* it is
important to include an air/
vacuum relief valve. The valve
will allow air to escape the
pipeline, thus preventing water
hammer or blockage. The valve
will also allow air to enter the
lines as water evacuates the
lines at shutdown. This prevents
vacuum suction of dirty water
from occurring.
Features
• Kit includes 1" air relief valve,
Easy Fit Tee, and Flush Cap.
• Use with Rain Bird Landscape
Dripline inline emitter tubing
• Made of quality rust-proof
materials
• Fits inside an SEB-6 emitter box
0,06
0,22
0,46
0,79
1,20
1,68
2,23
2,86
3,56
4,32
5,16
6,06
*Rain Bird does not recommend
sub-surface installation for turf-grass.
Model
• AR Valve Kit
Bars Loss per 100 Meters of Pipe (bars/100m)
Note: Use of tubing at flows shown in dark shaded area is not recommended, as velocities exceed 5 ft./sec. (1,5 m/s).
LD16ELB
LD16TEE
LD 16mm 00-100
LD16STK
250
www.rainbird.com
AR Valve Kit
2005 – 2006 Catalog
Black Stripe Tubing
Primary Application
Black Stripe Tubing is the latest tubing from Rain Bird for residential
and commercial drip systems. Produced with vibrant green, purple
or yellow stripes for easy zone identification, the colors add
simplicity to installation and maintenance. It is extruded from the
finest quality, UV-resistant polyethylene for outstanding durability in
the field.
Features
• Extruded from polyethylene resin materials for consistent durability
• Manufactured under strict ASTM test methods to ensure highest
quality
• UV-resistant for installations at or below grade
• Available in 3 color stripes (green, yellow and purple) to
differentiate zones
• Compact coils for easy storage and shipping
• Compatible with Easy Fit Compression Fittings or standard 710
compression fittings
XBS - Tubing Friction Loss Characteristics
O.D. .705" I.D. .615"
METRIC
O.D. 18 mm I.D. 15,5 mm
Flow
GPM
Velocity
fps
Loss
psi
Flow
m3⁄h
Flow
l/h
Velocity Loss
m/s
bars
0.50
1.00
1.50
2.00
2.50
3.00
3.50
4.00
4.50
5.00
5.50
6.00
0.54
1.08
1.62
2.16
2.70
3.24
3.78
4.31
4.85
5.39
5.93
6.47
0.14
0.52
1.09
1.86
2.81
3.94
5.24
6.71
8.35
10.15
12.11
14.22
0.11
0.23
0.34
0.45
0.57
0.68
0.79
0.91
1.02
1.14
1.25
1.36
113.6
227.1
340.7
454.3
567.8
681.4
794.9
908.5
1022.1
1135.6
1249.2
1362.8
0.16
0.33
0.49
0.66
0.82
0.99
1.15
1.32
1.48
1.64
1.81
1.97
0.03
0.12
0.25
0.42
0.64
0.89
1.19
1.52
1.89
2.30
2.74
3.22
Specifications
• Outside diameter: 0.705" (18 mm)
• Inside diameter: 0.615" (15,6 mm)
• Available in 100', 250', 500' and 1000' coils
Operating Range
• 0 to 60 psi (0 to 4,1 bars)
Models
• XBS 100: 100 foot coil with green striping
• XBS 100P: 100 foot coil with purple striping
• XBS 100Y: 100 foot coil with yellow striping
Black Stripe Tubing
2005 – 2006 Catalog
www.rainbird.com
251
Easy Fit Compression Fittings
Primary Application
Easy Fit Compression System is designed to work with a wide range
of 1⁄ 2" polyethylene tubing sizes while reducing the effort required to
insert the tubing into the fitting by almost 50%. The system offers a
simplified inventory program and unparalleled flexibility: three Easy
Fit Fittings plus five Adapters comprise over 160 different
configurations!
Features & Specifications
• Inventory Is Reduced: Multi Diameter Compression Fittings accept all
1⁄ 2" poly tubing from .630" to .710" (16mm-18mm) outside
diameter
• Time and Effort Are Saved—50% less force is required to connect
tubing and fittings versus competitive compression fittings
• Flexibility Is Increased—just a few Easy Fit Fittings and adapters are
needed to make over 160 connections, accommodating countless
installation situations.
• Works with Rain Bird Landscape Dripline, 16mm Blank Tubing and
XBS tubing
• Fittings are molded from UV-resistant ABS material with a Buna
Rubber Seal for long-term, leak-free connections
• Removable Flush Caps can be used to flush end of line and
temporarily cap off lines for later expansion
• Unique Patent Pending design
Friction Loss Per Fitting
Flow
GPM
Loss
psi
METRIC
Flow
l/h
0.00
1.00
2.00
3.00
4.00
5.00
6.00
0.00
0.39
0.64
0.82
1.45
1.90
2.57
0,00
227,1
454,3
681,4
908,5
1135,6
1362,8
Loss
bar
0,00
0,03
0,04
0,06
0,10
0,13
0,18
Note: use of fittings at flows shown in dark shaded area is not recommended.
Friction loss with XBS Tubing.
Operating Range
• Accepts tubing O.D. of .630" to .710" (16mm-18mm)
MDFCOUP
MDCF75FHT
MDCF50MPT
MDCFTEE
MDCF75FPT
MDCFPCAP
MDCFCAP
MDCFEL
252
www.rainbird.com
MDCF75MPT
MDCF50FPT
2005 – 2006 Catalog
Easy Fit Below Grade
Irrigation Emission Stake
Features
Designed to be buried below the surface, this combination stake,
coupling and threaded adapter accepts many sizes of 1⁄2" PE
tubing and a 1⁄2" threaded riser or adapter (accommodating
virtually any drip emission device). This stake allows most of the
system to be kept out of sight (reducing vandalism and required
maintenance) and is perfect for irregularly-shaped bedding areas.
Models
EASY FIT FITTINGS
• MDCFCOUP: Coupling
• MDCFEL: Elbow
• MDCDTEE: Tee
EASY FIT ADAPTERS
• MDCF50MPT: 1⁄2" Male Pipe Thread Adapter
• MDCF75MPT: 3⁄4" Male Pipe Thread Adapter
• MDCF50FPT: 1⁄2" Female Pipe Thread Adapter
• MDCF75FPT: 3⁄4" Female Pipe Thread Adapter
• MDCF75FHT: 3⁄4" Female Hose Thread Adapter
• MDCFCAP: Removable Flush Cap For Easy Fit Fittings (Black)
• MDCFPCAP: Removable Flush Cap For Easy Fit Fittings (Purple, to
Note: Easy Fit Adapters are not barbed fittings. They are to be used only with
Easy Fit Compression Fittings.
Features
• Incorporates Rain Bird’s Easy Fit Compression Fitting
• Accommodates any 1⁄2" polyethylene tubing with an outside
diameter of .630" - .710" (16mm-18mm)
• 50% less force is required to connect tubing and fittings versus
competitive compression fittings
• Manufactured using ABS material for long-lasting durability
• Top outlet has 1⁄2" NPT adapter, which accepts a standard 1⁄2" poly
flex riser
• Unique design is Patent Pending
Operating Range
Models
• BIGIESTK
BIGIESTK
2005 – 2006 Catalog
www.rainbird.com
253
1/4"
1/4"
Distribution Tubing
Features
• Extends emitter outlets to
desirable discharge locations.
• Fits over barbed outlet ports on all
Xerigation emission devices
and 1⁄ 4" transfer fittings.
• Made from quality polyethylene or
vinyl materials.
Specifications
• Outside diameter: 0.22" (6 mm)
• Inside diameter: 0.16" (4 mm)
Models
Vinyl Tubing
• DT-025-050: 50-foot (15,2 m) coil
of 1⁄ 4" vinyl distribution tubing
• DT-025-100: 100-foot (30 m) coil
of 1⁄ 4" vinyl distribution tubing
• DT-025-1000: 1000-foot (304m)
coil of 1⁄ 4" vinyl distribution tubing
• DT-025-1KPPK: Pallet Pack of
1000-foot (304m) coils of 1⁄ 4" vinyl
distribution tubing (32 coils per
pallet)
Polyethylene Tubing
• PT-025-050: 50-foot (15,2 m) coil
of 1⁄ 4" polyethylene distribution
tubing
• PT-025-100: 100-foot (30 m) coil
of 1⁄ 4" polyethylene distribution
tubing
• PT-025-1000: 1000-foot (304 m)
coil of 1⁄ 4" polyethylene distribution
tubing
• PT-025-1KPPK: Pallet Pack of
1000-foot (304m) coils of 1⁄ 4"
polyethylene distribution tubing
(32 coils per pallet)
Barb Transfer
Fittings
14
⁄ " Distribution Tubing Friction Loss Characteristics
O.D. .220" I.D. .160"
METRIC
O.D. 6 mm I.D. 4 mm
Flow
GPH
Velocity
fps
psi
Loss
Flow
m3⁄h
l/h
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
25
30
0.27
0.53
0.80
1.06
1.33
1.59
1.86
2.13
2.39
2.66
2.92
3.19
3.45
3.72
3.98
4.25
4.52
4.78
5.05
5.31
6.64
7.97
0.16
0.59
1.24
2.12
3.20
4.49
5.97
7.64
9.50
11.54
13.79
16.17
18.75
21.50
24.43
27.53
30.80
34.23
37.83
41.60
62.86
88.08
0,00
0,01
0,01
0,02
0,02
0,02
0,03
0,03
0,03
0,04
0,04
0,05
0,05
0,05
0,06
0,06
0,06
0,07
0,07
0,08
0,09
0,11
3,79
7,58
11,6
15,14
18,92
22,71
26,50
30,28
34,07
37,85
41,64
45,42
49,21
52,99
56,78
60,56
64,35
68,13
71,92
75,70
94,63
113,55
Velocity
bars
0,08
0,16
0,24
0,32
0,41
0,48
0,57
0,65
0,73
0,81
0,89
0,97
1,05
1,13
1,21
1,30
1,38
1,46
1,54
1,62
2,03
2,43
0,01
0,04
0,09
0,15
0,22
0,31
0,41
0,53
0,66
0,80
0,95
1,12
1,29
1,48
1,69
1,90
2,13
2,36
2,61
2,87
4,34
6,08
Features
• Used to connect 1⁄ 4" distribution
tubing (DT-025 or PT-025) in
different configurations.
• Rugged plastic construction.
Operating Range
(0 to 3,5 bars)
Models
• XBF1CONN: 1⁄ 4" Barb Connector
• XBF2EL: 1⁄ 4" Barb x Barb Ell
• XBF3TEE: 1⁄4" Barb x Barb x
Barb Tee
psi Loss Per 100 Feet of tubing; C=150
bars Loss per 100 Meters of tubing
Note: Use of tubing at flows shown in dark shaded area is not
recommended, as velocities exceed 5 ft./sec. (1,5 m/s).
XBF1CONN
XBF2EL
DT-025 / PT-025
Note: Polyethylene tubing recommended
for high temperature and high pressure
applications.
XBF3TEE
254
www.rainbird.com
2005 – 2006 Catalog
Distribution Component
1/4"
Self-Piercing
Barb Connector
Other Fittings and End Closures
Tubing Goof Plug
Features
Features
Features
• 700 Series Compression adapter fits Rain Bird XBS tubing, as well • Self-piercing barb inlet can be • New design works with
inserted into distribution tubing
as other 1/2" polyethylene tubing with .700" O.D.
XM-Tool to speed emitter
using a XM-Tool or Bug Gun
• 600 Series Compression adapter fits Rain Bird Landscape Dripline,
removal and plugging
(EMA-BGX) to provide a transfer of unwanted holes.
as well as other 1/2" polyethylene tubing with .620"-.630" O.D.
fitting for 1⁄ 4" distribution tubing
• All LOC fittings fit Rain Bird Landscape Dripline, as well as other
Model
(DT-025 or PT-025).
1/2" polyethylene tubing with .620"-.630" O.D.
• EMA-GPX
• Figure 8 End Closures (700 CF-22) are used at ends of drip tubing • Outlet barb accepts 1⁄ 4"
laterals and fit Rain Bird’s 1/2" XBS tubing, 16 mm tubing and
PT-025). Gray outlet barb
Landscape Dripline. Easily removed for flushing.
indicates unit has unrestricted
Operating Range
flow.
Operating Range
Models
• 700-CF-1: 1/2" (15/21) Compression Adapter
(0 to 3,5 bars)
• 600-CF-1: 16mm (15/21) Compression Adapter
Model
• LOC 16mm 050 MPT adapter
•
SPB-025
• LOC 16mm 075 MPT adapter
• LOC 16mm Tee
• LOC 16mm Elbow
• LOC 16mm Coupling
• 700-CF-22: Figure 8 end closure
Note: When gluing the 700-CF-1 or 600-CF-1 adapter into 1/2" PVC, use an ABS to
PVC bonding solvent.
Inlet
700-CF-1, 600-CF-1
700-CF-22
Outlet
LOC Fittings
2005 – 2006 Catalog
SPB-025
www.rainbird.com
EMA-GPX
255
Xeri Micro Valves
Features
• Micro-sized multi-purpose flow
control valves.
• Easily adjust or turn off flow
by rotating the ball valve.
Operating Range
(0 to 3,5 bars)
Models
• XMV-1032: 10-32 x 10-32
threads (use with flex risers)
• XMV-025: 1⁄ 4" barb x 1⁄ 4" barb
(use with DT-025 or PT-025
flexible distribution tubing).
Mounting Clip
Galvanized
Tie-Down Stake
Features
Features
Features
1
•
Used
to
attach
⁄
4
"
distribution
•
12-gauge
galvanized steel rod
• Provides convenient access
tubing (DT-025 or PT-025) to
comes pre-bent to staple
to subsurface emitter while
wood without pinching the tube. distribution tubing or Landscape
protecting against vandalism.
• Durable plastic construction.
Dripline to finished grade.
• Slotted body facilitates
installation of distribution tubing.
Model
Model
• Rugged, UV-resistant
• MC-025
• TDS-050 w/bend
thermoplastic construction.
Dimensions
• Height: 10 1⁄ 4" (26 cm)
• Top Diameter: 5" (12,7 cm)
• Base Diameter: 7 3⁄ 4" (19,7 cm)
Model
• SEB-6X
XMV-025 XMV-1032
256
1/4"
Subterranean
Emitter Box
SEB-6X
MC-025
www.rainbird.com
TDS-050 w/bend
2005 – 2006 Catalog
Control Zone Components
Control Zone Components control the flow,
pressure and/or filtration of water into a drip
irrigation zone.
Control Zone Kits
Primary Application
Control Zone Kits provide all of the components necessary to
control flow, pressure and filtration for a low-volume irrigation
zone. These convenient kits provide automatic control of a drip
irrigation zone when connected to an irrigation controller. Rain Bird
offers several options to fit your needs. Choose from:
• Low or Medium Flow Kits
• Static Wye Filter, Back Flush Filter or Basket Filter
• Anti-siphon, DV, PESB or new Low-Flow Valve
Note: See individual product information on Pages 263 - 267 for more detailed
information on the products in the following Control Zone Kits.
Control Zone Kit Selection Steps
1. Calculate flow rate requirements for drip zone.
2. If less than 4-5 GPM, choose kit from Low Flow Kits
• If Anti-Siphon Valve desired, choose XACZ-075 or XACZ-075-BFF
• If 1” Valve desired, choose XCZ-LF-100 or XCZ-LF-100-BF
• If Self-Cleaning Filter desired, choose XCZ-LF-075-BF,
XACZ-075-BFF or XCZ-LF-100-BF
3. If greater than 4-5 GPM, choose kit from Medium Flow Kits
• If Self-Cleaning Filter desired, choose XCZ-100-BFF
• If Anti-Siphon Valve desired, choose XACZ-100
• If commercial application and/or filter with indication for cleaning
desired, use XCZ-100-B-COM
Control Zone Selection Chart
Size
(Inlet x Outlet)
Model
Flow
Range
Pressure
Range
Valve
Filter
Outlet
Pressure
LOW FLOW CONTROL ZONE KITS
XCZ-LF-075
3
XCZ-LF-075-BF
3
0.2 – 5 GPM
20 – 120 psi
LFV-075
3
30 psi
3
0.2 – 5 GPM
20 – 120 psi
LFV-075
3
30 psi
XACZ-075
3
0.2 – 5 GPM
20 – 120 psi
075-ASVF
3
30 psi
XACZ-075-BFF
3
075-ASVF
3
30 psi
30 psi
⁄4" x ⁄4"
⁄4" x 3⁄4"
⁄4" x 3⁄4"
3
⁄4" x ⁄4"
3
0.2 – 5 GPM
20 – 120 psi
⁄4" RBY Filter
⁄4" Back Flush Filter
⁄4" RBY Filter
XCZ-LF-100
1" x ⁄4"
0.2 – 5 GPM
20 – 120 psi
LFV-100
3
XCZ-LF-100-BF
1" x 3⁄4"
0.2 – 5 GPM
20 – 120 psi
LFV-100
3
30 psi
⁄4" RBY Filter
MEDIUM FLOW CONTROL ZONE KITS
XCZ-100*
1" x 1"
3 – 15 GPM
20 – 120 psi
100-DV
1" RBY Filter
40 psi
XCZ-100-BFF*
1" x 1"
3 – 15 GPM
20 – 120 psi
100-DV
1" Back Flush Filter
40 psi
XACZ-100
1" x 1"
3 – 15 GPM
20 – 120 psi
100-ASVF
1" RBY Filter
40 psi
XCZ-100-B-COM
1" x 1"
3 – 20 GPM
20 – 150 psi
100-PESB
1" Basket Filter
40 psi
2005 – 2006 Catalog
www.rainbird.com
257
NEW
Low Flow Kits with Static Wye Filter
Features
• Kits contain Low Flow Valve or 3⁄4" Anti-siphon valve, RBY Filter and
30 psi pressure regulator
• Low Flow Valve is ideal for flows down to 0.2 GPM, and allows
you to install the filter downstream of the valve at these low flow
rates
• Anti-siphon valve combines a reliable DV Valve and an
atmospheric backflow preventer in one unit
• Simple, 3-component kit is easily installed and maintained
• Ideal for residential and small commercial applications
Operating Range
• Flow: 0.20 to 5.0 GPM (45,4 to 1136 liters/hour;
0,01 to 0,32 liters/sec)
• Filtration: 200 mesh
• Pressure Regulation: 30 psi (2,1 bars)
Models
• XCZ-LF-075 ( 3⁄4" Low Flow Valve + 3⁄4" RBY Filter
+ 30 psi Pressure Regulator)
• XCZ-LF-100 (1" Low Flow Valve + 3⁄4" RBY Filter
• XACZ-075 ( 3⁄4" Anti-siphon Valve + 3⁄4" RBY Filter
+30 psi Pressure Regulator)
Minimum Inlet Pressure for 30 psi Outlet Pressure
Flow
GPM
Flow
GPH
XCZ-LF-075
psi
0.2
1.0
2.0
3.0
4.0
5.0
12.0
60.0
120
180
240
300
32.0
32.1
33.8
36.3
40.1
46.4
XCZ-LF-100
psi
32.2
32.5
34.4
36.3
40.1
45.0
XACZ-075
psi
33.0
33.8
35.7
37.6
40.1
47.0
Minimum Inlet Pressure for 2,1 bars Outlet Pressure
Flow
l/hr
Flow
l/s
XCZ-LF-075 XCZ-LF-100
bars
bars
XACZ-075
bars
45,42
227
454
681
908
1136
0,01
0,06
0,13
0,19
0,25
0,32
2,2
2,2
2,3
2,5
2,8
3,2
2,3
2,3
2,5
2,6
2,8
3,2
2,2
2,2
2,4
2,5
2,8
3,1
XCZ-LF-075
XCZ-LF-100
258
XACZ-075
www.rainbird.com
2005 – 2006 Catalog
Low Flow Kits with Self-Cleaning
Back Flush Filter
NEW
Features
• Kits contain Low Flow Valve or 3⁄4" Anti-Siphon Valve, Back Flush
Filter (BFF) and 30 psi pressure regulator (Check Valve also included
in kits with Low Flow Valve)
• Low Flow Valve is ideal for flows down to 0.2 GPM, and allows you
to install the filter downstream of the valve at these low flow rates
• Anti-siphon valve combines a reliable DV Valve and an atmospheric
backflow preventer in one unit
• Back Flush Filter is self-cleaning and provides cleaning action with
every cycle
• Back Flush Filter flushes debris every time the system is turned on
and off and is ideal for residential and city water applications
Operating Ranges
• Flow: 0.20 to 5.0 GPM (45,4 to 1136 liters/hour; 0,01 to
0,32 liters/sec)
Models
• XCZ-LF-075-BF ( 3⁄4" Low Flow Valve + 3⁄4" BFF
• XCZ-LF-100-BF (1" Low Flow Valve + 3⁄4" BFF
+ 30 psi Pressure Regulator + Check Valve)
• XACZ-075-BFF ( 3⁄4" Anti-siphon Valve+ 3⁄4" BFF
Minimum Inlet Pressure for 30 psi Outlet Pressure
Flow Flow XCZ-LF-075-BF
GPM GPH psi
XCZ-LF-100-BF XACZ-075-BFF
psi
psi
0.2
1.0
2.0
3.0
4.0
5.0
33.0
33.8
35.7
36.9
40.1
46.4
12.0
60.0
120
180
240
300
34.5
35.0
36.9
38.2
41.3
47.6
Minimum Inlet Pressure for 2,1 bars Outlet Pressure
Flow Flow XCZ-LF-075-BF
l/hr l/s
bars
XCZ-LF-100-BF XACZ-075-BFF
bars
bars
45,42
227
454
681
908
1136
2,3
2,3
2,5
2,5
2,8
3,2
0,01
0,06
0,13
0,19
0,25
0,32
XCZ-LF-075-BFF
2005 – 2006 Catalog
33.6
34.0
34.4
36.3
38.8
45.1
2,3
2,3
2,4
2,5
2,7
3,1
2,4
2,4
2,5
2,6
2,8
3,3
XACZ-075-BFF
www.rainbird.com
259
Medium Flow Kit with Static Wye Filter
Features
• Kits contain 1" DV Valve or 1" Anti-siphon Valve, RBY Filter, and 40
psi pressure regulator.
• Simple, 3-component kit is easily installed and maintained
• Ideal for residential and small commercial applications
Operating Ranges
• Flow: 3.0 – 15.0 GPM (681 to 3407 liters/hour;
Models
• XCZ-100* (1" DV Valve + 1" RBY Filter + 40 psi Pressure Regulator)
• XACZ-100* (1" ASVF + 1" RBY Filter + 40 psi Pressure Regulator)
Minimum Inlet Pressure for 40 psi/2,8 bars Outlet Pressure
Flow
GPM
Flow
GPH
XCZ-100
psi
XZCZ-100
psi
3.0
5.0
7.0
9.0
11.0
13.0
15.0
180
300
420
540
660
780
900
43.0
43.8
45.7
46.9
47.6
48.8
50.3
43.2
44.4
45.7
46.3
48.8
52.0
54.5
Flow
l/hr
Flow
l/s
XCZ-100
bars
XZCZ-100
bars
681
1136
1590
2044
2498
2952
3407
0,19
0,32
0,44
0,57
0,69
0,82
0,95
3,0
3,0
3,2
3,2
3,3
3,4
3,5
3,0
3,1
3,2
3,2
3,4
3,6
3,8
METRIC
XCZ-100
260
XACZ-100
www.rainbird.com
2005 – 2006 Catalog
Medium Flow Kit with Self-Cleaning
Back Flush Filter
Features
• Kit contains 1" DV Valve, Back Flush Filter (BFF), 40 psi pressure
regulator and a Check Valve.
• Back Flush Filter is self-cleaning and provides scrubbing action
with every cycle.
• Back Flush Filter flushes debris every time the system is turned on
and off and is ideal for residential and city water applications.
Operating Ranges
Flow
GPM
Flow
GPH
XCZ-100-BFF
psi
3.0
5.0
7.0
9.0
11.0
13.0
15.0
180
300
420
540
660
780
900
42.5
43.8
45.7
46.9
48.8
51.3
55.1
Flow
l/hr
Flow
l/s
XCZ-100-BFF
bars
681
1136
1590
2044
2498
2952
3407
0,19
0,32
0,44
0,57
0,69
0,82
0,95
2,9
3,0
3,2
3,2
3,4
3,5
3,8
METRIC
Models
• XCZ-100-BFF* (1" DV Valve + 1" BFF + 40 psi Pressure Regulator
+ Check Valve)
XCZ-100-BFF
2005 – 2006 Catalog
www.rainbird.com
261
NEW
Medium Flow Commercial Control Zone Kit
Features
• Kit contains 1" PESB valve, Quick Check Filter and 40 psi Pressure
Regulator.
• PESB Valve provides patented scrubbing action, making this kit ideal
for commercial dirty water applications.
• Quick Check Filter has clear indicator which goes from green to red,
telling you when to clean the filter. This reduces maintenance and
takes the guesswork out of cleaning the filter. In addition, the
threaded top makes it easy to remove and clean the stainless steel
screen.
• Quick Check Filter has a basket at the bottom to catch accumulated
debris without allowing it to fall back into the filter.
Operating Range
• Pressure: 20 – 150 psi (1,4 to 10,3 bars)
Model
• XCZ-100-B-COM (1" PESB Valve + 1" Basket Filter
Flow
GPM
Flow
GPH
XCZ-100-B-COM
psi
3.0
5.0
7.0
9.0
11.0
14.0
17.0
20.0
180
300
420
540
660
840
1020
1,200
43.0
44.0
45.0
45.5
46.2
48.1
50.7
54.0
Flow
l/hr
Flow
l/s
XCZ-100-B-COM
bars
681
1136
1590
2044
2498
3179
3861
4542
0,19
0,32
0,44
0,57
0,69
0,88
1,07
1,26
3,0
3,0
3,1
3,1
3,2
3,3
3,5
3,7
METRIC
XCZ-100-B-COM
262
www.rainbird.com
2005 – 2006 Catalog
NEW
Low Flow Valve
Features
• The only valve in the industry made especially for drip irrigation
systems. This valve contains all of the features of Rain Bird’s
reliable DV valve, coupled with a unique diaphragm design that
allows particles to pass through at extremely low flow rates,
thereby preventing weeping of the valve.
• Unique “double-knife” diaphragm coupled with 1⁄2" diameter seat
for flawless operation at low flow rates
• Available in 3⁄4" and 1" models
• Double-filtered pilot flow design for maximum reliability
installation and system start-up
• Internal bleed for spray-free manual operation
Operating Ranges
• Flow: 0.20 – 8.0 GPM (45,42 to 1816 liters/hour;
• 24 VAC 50/60 Hz (cycles/sec) solenoid
• Inrush current: 0.30 (7.2 VA) at 60 Hz
• Holding current: 0.19 A (4.56 VA)
Friction Loss Characteristics
Flow
GPM
Flow
GPH
LFV-075
psi
LFV-100
psi
0.2
1.0
2.0
4.0
6.0
8.0
12.0
60.0
120
240
360
480
2.8
2.8
3.5
3.7
4.4
5.2
2.8
2.8
3.5
3.7
4.4
5.2
Flow
l/hr
Flow
l/s
LFV-075
bar
LFV-100
bar
45,42
227
454
908
1362
1817
0,01
0,06
0,13
0,25
0,38
0,50
0,19
0,19
0,24
0,26
0,30
0,36
0,19
0,19
0,24
0,26
0,30
0,36
METRIC
Dimensions
• Height: 4 1⁄2" (11,4 cm)
• Length: 4 1⁄4" (10,7 cm)
• Width: 3 1⁄3" (8,4 cm)
Models
• LFV-075
• LFV-100*
LFV-075
2005 – 2006 Catalog
Unique diaphragm design
www.rainbird.com
263
Inline WYE Filter
Primary Application
This inline filter is ideal for filtration in low-volume irrigation
systems. Used in conjunction with a valve and pressure regulator,
it protects the downstream components in a drip irrigation system.
Flow Rate
GPM
Flow Rate
GPH
RBY075MPTX
psi
RBY100MPTX
psi
1.00
3.00
5.0
7.0
9.0
12.0
14.0
16.0
18.0
60.0
180
300
420
540
720
840
960
1080
0.1
0.4
1.1
1.6
2.7
4.5
----
0.1
0.3
0.5
0.8
1.4
2.2
3.0
3.8
4.7
Flow Rate
GPM
Flow Rate
GPH
RBY075MPTX
bar
RBY100MPTX
bar
Models
• RBY075MPTX ( 3⁄4" Inline WYE Filter with 200 Mesh Screen)
• RBY100MPTX* (1" Inline WYE Filter with 200 Mesh Screen)
45,42
227
681
1136
1590
2044
2725
3179
3634
4088
0,01
0,06
0,19
0,32
0,44
0,57
0,76
0,88
1,01
1,14
0,00
0,01
0,03
0,08
0,11
0,19
0,31
----
0,00
0,01
0,02
0,03
0,06
0,10
0,15
0,21
0,26
0,32
* Available with BSP Threads
Note: Friction loss for 200 mesh filter screen.
• Glass filled nylon construction provides 150 psi pressure rating
through MPT connections
• Replacement filter elements are available in three configurations:
200 mesh (75 micron), 150 mesh (100 micron) and 100 mesh
(150 micron) models
• Cap has a sealing O-ring and unthreads to provide access to the
filter element for easy cleaning
• Male x Male threaded connections for direct connection to valves
and pressure regulators
Operating Range
• Flow:
• 3⁄4" units: 0.20 to 12 GPM (45,4 to 2725 liters/hr;
• 1" units: 0 .20 to 18 GPM (45,4 to 4088 liters/hr;
METRIC
Replacement screens also available:
• RBY-100MX (100 mesh screen)
RBY075MPTX
264
www.rainbird.com
2005 – 2006 Catalog
Back Flush Filter
NEW
Primary Application
The new self-cleaning Back Flush Filter provides scrubbing action
with every cycle. This revolutionary filter has a pressure actuated
piston which flushes debris each time the system is turned on and
off. With virtually no maintenance, this filter protects your system
and is ideal for residential and city water applications.
• Filter provides self-cleaning action with every cycle, as debris is
flushed every time the system is turned on and off
• Can be installed at or below grade in a standard valve box
• Use with check valve (CV-075 or CV-100) when Back Flush Filter is
at a lower elevation than the rest of the system
• Male x Male threaded connections for direct connection to valves
and pressure regulators
• Replacement filter elements are available in three configurations:
200 mesh (75 micron), 150 mesh (100 micron) and 100 mesh
(150 micron) models
Operating Range
• Flow
• 3⁄4" BFF: 0.20 to 12.0 GPM (45,4 to 2725 liters/hour;
0,01 to 0,76 l/s)
• 1" BFF: 0.20 to 18.0 GPM (45,4 to 4088 l/h; 0,01 to 1,14 l/s)
Models
• BFF075MPT ( 3⁄4" Back Flush Filter with 200 mesh screen)
• BFF100MPT* (1" Back Flush Filter with 200 mesh screen)
Flow Rate
GPM
Flow Rate
GPH
BFF075MPT
psi
BFF100MPT
psi
0.20
1.00
3.00
5.0
7.0
9.0
12.0
14.0
16.0
18.0
12.00
60.0
180
300
420
540
720
840
960
1080
0.4
0.5
0.6
1.1
1.8
2.7
4.7
----
0.4
0.5
0.6
0.9
1.4
2.0
3.5
4.6
6.0
7.5
Flow Rate
l/hr
Flow Rate
l/s
BFF075MPT
bar
BFF100MPT
bar
45,42
227
681
1136
1590
2044
2725
3179
3634
4088
0,01
0,06
0,19
0,32
0,44
0,57
0,76
0,88
1,01
1,14
0,03
0,03
0,04
0,08
0,12
0,19
0,32
----
0,03
0,03
0,04
0,06
0,10
0,14
0,24
0,32
0,41
0,52
METRIC
Note: Friction loss for 200 mesh filter screen.
*Available with BSP Threads
Replacement parts also available:
• BFF100M—100 mesh screen
• BFFREPAIR—Repair kit contains piston, screen and spring
• BFFDB—Duckbill Boot
BFF075MPT
2005 – 2006 Catalog
www.rainbird.com
265
NEW
Basket Filter
Features
• This new, innovative filter provides reliability and reduces labor
and maintenance costs.
• Top contains clear indicator that goes from green to red when
filter is full, telling you when to clean the filter. This reduces
maintenance and takes the guesswork out of cleaning the filter.
• Threaded top makes it easy to remove and clean the stainless
steel screen.
• “No Spill” feature ensures that the dirt does not fall out of the
basket filter element when you remove the screen for cleaning.
Operating Range
• Flow
• 3⁄4" Basket Filter: 0.20 to 12.0 GPM (45,4 to 2725 liters/hour)
• 1" Basket Filter: 3.0 to 20.0 GPM (681 to 4542 l/h)
• Pressure: 0-150 psi (0 to 10,3 bars)
Models
• QKCHK-075 ( 3⁄4" Basket Filter with 200 mesh screen)
• QKCHK-100 (1" Basket Filter with 200 mesh screen)
• QKCHK-050M (50 mesh screen)
Friction Loss Characteristics - QKCHK-075
Flow Rate
GPM
Flow Rate
GPH
200 mesh
psi
150 mesh
psi
0.20
2.00
4.00
6.0
8.0
10.0
12.0
12.0
120
240
360
480
600
720
0.4
0.5
0.7
0.9
1.1
1.5
1.9
0.3
0.3
0.3
0.8
1.2
1.9
2.4
Flow Rate
l/hr
Flow Rate
l/s
200 mesh
bar
150 mesh
bar
45,42
454
908
1362
1817
2271
2725
0,01
0,13
0,25
0,38
0,50
0,63
0,76
0,03
0,03
0,05
0,06
0,08
0,10
0,13
0,02
0,02
0,02
0,06
0,08
0,13
0,17
METRIC
Friction Loss Characteristics - QKCHK-100
Flow Rate
GPM
Flow Rate
GPH
200 mesh
psi
150 mesh
psi
3.0
5.0
7.0
9.0
11.0
14.0
17.0
20.0
180
300
420
540
660
840
1020
1200
0.2
0.3
0.6
0.9
1.2
2.1
3.1
4.4
0.0
0.2
0.4
0.7
1.1
1.6
2.4
3.4
Flow Rate
l/hr
Flow Rate
l/s
200 mesh
bar
150 mesh
bar
681
1136
1590
2044
2498
3179
3861
4542
0,19
0,32
0,44
0,57
0,69
0,88
1,07
1,26
0,01
0,02
0,04
0,06
0,08
0,14
0,21
0,30
0,00
0,01
0,03
0,05
0,08
0,11
0,17
0,23
METRIC
QKCHK-100
266
www.rainbird.com
2005 – 2006 Catalog
Inline Pressure Regulators
Check Valves
Features
• Can be installed above or below the ground.
• Preset outlet pressures: 30 psi (2,0 bars), 40 psi (2,8 bars),
50 psi (3,5 bars).
• 3⁄ 4" (20/27) or 1" (26/34) female-threaded inlet and outlet.
Operating Range
• Flow
• PSI-L30X-075: 0.10 to 5.0 GPM; 6 to 300 GPH (23,0 to 1135 l/h)
• PSI-M30X-075, PSI-M40X-075, PSI-M50X-075: 2.0 to 10.0 GPM;
120 to 600 GPH (454 to 2271 l/h)
• PSI-M40X-100, PSI-M50X-100: 2.0 to 15.0 GPM; 120 to 900 GPH
(454 to 3407 l/h)
• Inlet Pressure:
• PSI-L30X/M30X: 10-150 psi (0,7 to 10,3 bars)
• PSI-M40X-075/100: 10-150 psi (0,7 to 10,3 bars)
• PSI-M50X-075/100: 10-150 psi (0,7 to 10,3 bars)
Note: For inlet pressures that exceed the operating range, specify/install
two regulators in series.
Features
• Prevents water from draining
upstream of check valve or
back into valve box.
• Use with a Back Flush Filter
when filter is at a lower
elevation than the rest of the
system.
Operating Ranges and
Specifications
(1,4 to 8,3 bars)
• Threads
• CV-075: 3⁄4" FPT x 3⁄4" FPT
• CV-100: 1" FPT x 1" FPT
Models
• CV-075
• CV-100
Models
• PSI-L30X-075: 3⁄ 4" 30 psi (2,0 bars)
regulator for low flow (red label)
• PSI-M30X-075: 3⁄ 4" 30 psi (2,0 bars)
regulator for medium flow (yellow label)
• PSI-M40X-075: 3⁄ 4" 40 psi (2,8 bars)
• PSI-M50X-075: 3⁄ 4" 50 psi (3,4 bars)
• PSI-M40X-100: 1" 40 psi (2,8 bars)
regulator for medium flow
• PSI-M50X-100: 1" 50 psi (3,4 bars)
regulator for medium flow
Note: Now available in bulk packs
PSI-L30X-075
PSI-M50X-075
2005 – 2006 Catalog
CV-075
PSI-M40X-100
www.rainbird.com
267
Commercial RBY Filters
Stainless Steel Screens
Features
•Heavy-duty glass-filled UV-resistant polyester material
•Pressure rated to 150 psi (10,3 bars)
•Available in 11⁄2" and 2" models
•Flows
•1 1⁄2" Unit: 55 GPM max. (3,47 l/s)
•2" Unit: 110 GPM max. (6,94 l/s)
•1" FNPT inlet/outlet and 3⁄4" manual flush port
•SC-SS stainless steel screen required
Features
• Use inside commercial grade RBY filter (RBY150CLSS, RBY200CLSS)
and Automatic Filter Kit
• Available in 30-, 50-, 100-, 150-, and 200-mesh size
• Color-coded for easy identification: gold–30-mesh, yellow–50-mesh,
blue–100-mesh, black–150-mesh, and red–200-mesh
• Mesh is made of durable stainless steel welded to color-coded
polypropylene
• Spin plate included
Models
• RBY 150C LSS (11⁄2" Filter, no screen)
• RBY 200C LSS (2" Filter, no screen)
Models
• SC 150 030 SS (11⁄2" 30-mesh, stainless steel)
• SC 200 030 SS (2" 30-mesh, stainless steel)
Total Differential Pressure (psi)
11/2" and 2” Commercial RBY Filters
Flow Characteristics for the Commercial RBY Filters
14
11/2" With
Spin Plate
12
2" With
Spin Plate
10
8
6
2" Without
Spin Plate
11/2" Without
Spin Plate
4
2
0
20
40
60
80
100
120
Flow (GPM)
RBY - XXX - C - LSS
Model
LSS
LSS = Less
Stainless
Steel Screen
Y-Filter Inlet/Outlet Size
150 = 11⁄2" Y-Filter Inlet/Outlet size
200 = 2" Y-Filter Inlet/Outlet size
Specify the stainless steel screen for
your specific application.
268
How to Specify
Commercial Grade
RBY 150C LSS
Stainless Steel Screens
www.rainbird.com
2005 – 2006 Catalog
Automatic Filter Kit
Primary Application
Combines a commercial grade, 150-psi pressure rated
Y-filter with the proven Rain Bird PESB “scrubber” valve for
reliable, long-term automatic filtration. The need for routine,
manual maintenance is virtually eliminated.
Features
•Rugged, glass-filled nylon and stainless steel components
for long-term durability
• Patented, mechanical scrubbing of stainless steel screen in
PESB valve ensures valve reliably opens and closes in the
presence of organic and inorganic contamination
• Rain Bird ESP-LX+ or ESP-MC recommended for automatic
control of flush cycles
• PESB valve also accepts Rain Bird Easy Rain™ or UNIK™ Series
latching solenoids for automatic, battery-operated control
of flush cycles
• SC-SS stainless steel screen required
Operating Range
•Temperature: Up to 110° F (43.3° C) water
Up to 125° F (51.7° C) ambient
• Flow Rate: 11⁄ 2" Model: 5.0-55.0 GPM (0,32-3,47 l/s)
• Flow Rate: 2" Model: 5.0-115.0 GPM (1,14-26,11 m3⁄h)
(0,32-7,25 l/s)
Specifications
• PESB valve has a 24 VAC 50/60 cycle solenoid power requirement:
0.41 A (9.9 VA) inrush current; 0.23 A (5.5VA) holding current
• Kit includes a 1" PESB “scrubber” valve with 1" FNPT inlet/outlet;
Y-filter with 3⁄ 4" MNPT flush port; fittings (shipped unassembled)
Dimensions
• 1" PESB valve
Length: 4" (10,2 cm)
Width: 4" (10,2 cm)
Height: 61⁄ 2" (16,5 cm)
•11⁄ 2" Y-filter
Length: 12" (30,5 cm)
Width: 51⁄ 2" (14,0 cm)
Height: 12" (30,5 cm)
•2" Y-filter
Length: 12" (30,5 cm)
Width: 51⁄ 2" (14,0 cm)
Height: 12" (30,5 cm)
Models
• AF150-LSS Automatic Filter Kit with 11⁄ 2" Y-filter MNPT
• AF200-LSS: Automatic Filter Kit with 2" Y-filter MNPT
Note: Screen must be ordered separately.
AF150-LSS*
AF150-LSS
2005 – 2006 Catalog
AF200-LSS
www.rainbird.com
How to Specify
LSS
Less Stainless Steel Screen
Y-Filter Inlet/Outlet Size
150=1 1/2" Male Inlet/Outlet
200= 2" Male Inlet/Outlet
Model
AF: Automatic Filter (NPT)
* Stainless steel screen mesh SC150 or
SC200 must be specified/ordered
separately
269
Xeri-Caps™ for
Spray Heads
Retrofit Kit
Features
• Permits convenient conversion to drip tubing when used with
compression adapter.
• Provides 30 psi (2,0 bars) pressure regulation and 200-mesh
(75-micron) screen that is easily accessible.
• Internal assembly drops into any 1804, 1806 or 1812 spray head
body to easily retrofit existing system to Xerigation products.
• Can be installed above or below grade.
• If retrofit flow is less than 3 GPM, replace electronic valve with
Rain Bird’s Low Flow Valve.
Operating Range
• Flow: 0.50 to 4.00 GPM (0,11 to
0,91 m3⁄h; 0,03 to 0,25 l/s)
• Inlet Pressure: 15 to 70 psi
(1,0 to 4,8 bars)
Features
• Used to retrofit a spray head
system to a Xerigation system
by capping off any unused
spray heads.
Operating Range
(0,0 to 4,8 bars)
Dimension
• Width: 2 1⁄ 4" (5,7 cm)
Models
• XC-1800: fits Rain Bird
1800 Series sprays
• XC-T-570: fits Toro®
570 Series sprays
Dimensions
• 1⁄ 2" (15/21) female-threaded inlet
• 1⁄ 2" (15/21) male-threaded swivel outlet
• Height: 7" (17,8 cm)
• Width: 2" (5,1 cm)
Toro is a registered trademark of the
Toro Company.
Retrofit Pressure
Regulator
Features
• Provides convenient 30 psi
(2,0 bars) pressure regulation
at the riser for any 1⁄ 2” FPT
emission device or compression
adapter.
• Can be installed above or
below grade.
• Can be used with Xeri-Bird ™ 8
Multi-Outlet Emission Device.
Operating Range
• Flow: 0.50 to 4.00 GPM (0,11 to
0,91 m3⁄h; 0,03 to 0,25 l/s)
• Inlet Pressure: 15 to 70 psi
(1,0 to 4,8 bars)
Dimensions
• 1⁄ 2" (15/21) female-threaded
inlet
• Height: 4" (10 cm)
Model
• PRS-050-30
Model
• RETRO-1800
1/2" NPT swivel outlet
30 psi pressure
regulator
200-mesh filter
Rugged, UV-resistant
1800 body
RETRO-1800
270
Rain Bird®
DC-1800
www.rainbird.com
Toro®
XC-T-570
PRS-050-30
2005 – 2006 Catalog
Tools
Ball Valve
Features
• Positive drip-tight shutoff.
• Rapid 1⁄ 4-turn on/off control.
• Durable PVC body ( 3⁄ 4" 20/27
NPT) and rugged ABS handle.
Operating Range
• Flow: 0 to 22.0 GPM (0 to
5,0 m3⁄h; 0 to 1,39 l/s)
• Pressure: 15 to 150 psi (1,0
to 10,0 bars)
Tools: Xerigation tools are specially designed
™
Xeriman Tool
to simplify and speed the installation of
Xerigation products.
Primary Application
Multi-function tool for use with Rain Bird drip/low-volume
components. The Xeriman Tool is so versatile and easy to use,
it cuts emitter installation time by 50%.
Hole Punch Tool and
Replacement Tips
Features
• EMA-RBPX Punch is used
to pre-punch holes into drip
tubing to permit installation
of barbed emission devices.
Features
Models
• Provides fast, easy, one-step installation of Xeri-Bug™
emitters and PC Modules directly into 1⁄ 2" or 3⁄ 4" drip tubing such as • EMA-RBPX: Punch
• EMA-CTX: Replacement tips
Xeri Black Stripe Tubing (XBS).
Model
• XM-TOOL
Model
• XBV-075
One Step XeriBug™ Insertion
XBV-075
2005 – 2006 Catalog
Xeri-Bug™
Removal
Continuous Feed
Insertion
XM-TOOL
www.rainbird.com
Goof Plug
Insertion
EMA-CTX EMA-RBPX
271
Tools
Multi Port
Nozzle Punch
Bug Gun
Tubing Cutter
Emitter Installation Tool
Features
Features
• MP Nozz Punch is used to punch • For use with Rain Bird selfpiercing Xeri-Bug™ (XB Series)
out additional exit ports for 5
emitters, and PC Modules.
different spray patterns
• Provides fast, easy, one-step
• Fits inside Xeriman™ tool
installation of emitters into
Model
Xeri Black Stripe Tubing (XBS)
• MPNOZZNOZPUNCH
and Landscape Dripline.
•Consistently produces
well-formed, tight-fitting
insertion holes to eliminate
leaking or spraying around
emitter barbs.
• Constructed of durable,
glass-filled nylon, and other
non-corrosive components.
Features
• This quick-action, Xerigation
tubing cutter is designed for
easy and clean cutting of all
Xerigation tubing.
• Cutter is lightweight with nylon
handles and stainless steel
blades. Replacement blades
available (PPC-200XBLD).
Model
• PPC-200X: Cutter
• PPC-200XBLD: Replacement
blade
Model
• EMA-BGX
Multi-port
punch
Xeriman ™
Tool (XM-TOOL)
MPNozznozPunch
272
EMA-BGX
PPC-200X
www.rainbird.com
2005 – 2006 Catalog
Spray Heads
Rotary
Nozzles
Rotors
Impacts
Valves
Controllers
Central
Controls
Accessories
Install Confidence.
Install Rain Bird Accessories.
™
™
®
®
Pump Stations
Xerigation®
Accessories
Resources
& Training
Reference
Accessories
Power Pro, Shower Pro
Pipe Cutter
6-in-1 Screwdriver
Wire Stripper
Hose End Nozzles
GPC-300
SD6
WS
Primary Application
Eliminate the need to replace
damaged hose end nozzles
with these high durability hose
end nozzles. The Power Pro
Hose End Nozzle is used for
high pressure applications
(walkways, equipment cleaning,
large areas) and the Shower
Pro Hose End Nozzle is used for
watering down turf and shrubs.
Primary Application
This large green pipe cutter
has a stainless steel blade
that’s used primarily to cut
polyethylene pipe. It can also
be used to cut and score PVC
pipe as well.
Primary Application
Professional-quality screwdriver
offers 6 different tools. With its
high-strength carbon steel bits
and bright nickel-plated finish,
this screwdriver is durable and
corrosion resistant. This versatile
tool is a handy complement to
any toolbox.
Primary Application
Small, lightweight, and convenient. These wire strippers
handle #10 to #22 gauge wire.
A high quality finish and competitive price make this a must
for every contractor’s tool box.
Features
• Durable body made from aircraft grade aluminum and highimpact composite materials
• On/Off control at the nozzle
• Multiple spray patterns
• Up to 35 GPM (8,0 m3/h; 2,2 l/s)
• Shock-proof collar
Features
• Cuts rubber hose up to 2"
(5,1 cm)
• Cuts P.E. up to 11⁄2" (3,8 cm)
• Cuts class 200 PVC up to
11⁄4" (3,2 cm)
• Replacement blades available
Model
• GPC-300: Pipe Cutter
• GPC-300BLD: Replacement
Blades
Specification
(5,5 bars) and 110° F
Model
• PHEN-075P: 3⁄4" (20/27) male
NPT Power Pro
• PHEN-075SH: 3⁄4" (20/27) male
NPT Shower Pro
Power Pro, Shower Pro
274
Accessories
Features
• High quality black finish
• Includes a pliers nose, cutter,
wire loop and a locking feature
Features
• 6-in-1 versatility
• Phillips #1 head
• Phillips #2 head
Model
• 5⁄32" (0,4 cm) blade
•
WS
• 3⁄16" (0,5 cm) blade
• 1⁄4" (0,6 cm) nut driver
• 5⁄16" (0,8 cm) nut driver
• Durable rubberized handle
provides maximum grip even
when wet
• Professional quality high-strength
carbon steel bits for superior hold
on screw, nut, and bolt heads
• Bright nickel-plated screwdriver
bits and nut driving shaft for extra
corrosion resistance and easy
cleaning
Models
• SD6 - 6-in-1 Screwdriver
GPC-300
SD6
www.rainbird.com
WS
2005 – 2006 Catalog
Accessories
Tool Bags
Knee Pads
Bucket Caddy
Tote
TOOLBAG16,
TOOLBAG24
KP-1
BUCKETCDDY
TOTE
Primary Application
Handy carrier for organizing and
carrying a variety of tools. These
full-featured tool bags have multiple
internal and external pockets and
are built from professional-duty
green and black nylon. The framed
zipper opens wide and stays open
making contents easily accessible.
Primary Application
Primary Application
Used by professional installers Easily fastens to any standard
who move fast and take care
5-gallon bucket and turns it
of themselves. Hard plastic
into a convenient tool caddy.
knee cap and velcro adjustFeatures
ment straps comfortably
• Durable nylon construction
protect knees from rough
with 14 heavy duty pockets
surfaces.
• Adjustable “waist-band” to
Features
ensure a snug fit for all stanFeatures
• Lightweight and durable
dard 5-gallon buckets
• Sturdy inner framework
• Riveted plastic caps
• Attractive green and black fin• Convenient interior and exterior
• Green body with black cap
ish featuring the Rain Bird
pockets
logo
Model
• Comes with a detachable shoulder
• Compatible with all standard
• KP-1
strap
5-gallon buckets
• Made from rugged, easy to clean
Models
nylon
• BUCKETCDDY— Bucket Caddy
• Color: Green and black with the
Rain Bird logo
• Available in 16" (40,7 cm) and
24" (61 cm) lengths
Primary Application
This handy open-top carrier
holds tools, fittings, glue, and
other essentials to the job site.
Features
• Easy to carry
• Practical and competitively
priced
• Durable construction
Dimensions
• 17 5⁄8" x 13 1⁄4" x 7 3⁄4"
(44,8 cm x 33,3 cm x 19,7 cm)
Model
• TOTE
Specifications
• TOOLBAG16 Dimensions:
16" L x 9" W x 12" H
(40,7 cm x 22,9 cm x 30,5 cm)
• TOOLBAG24 Dimensions:
24" L x 10" W x 12" H
(61,0 cm x 25,4 cm x 30,5 cm)
Models
• TOOLBAG16 - 16" Green and
black nylon tool bag
• TOOLBAG24 - 24" Green and
black nylon tool bag
TOOLBAG16, TOOLBAG24
2005 – 2006 Catalog
KP-1
BUCKETCADDY
www.rainbird.com
TOTE
Accessories
275
Accessories
Clamps
Cable Ties
Teflon ® Tape
Terry Towels
CLAMP Series
TIE8, TIE15
TEFLON ® Series
TOWEL18
Primary Application
These hose clamps are made
from 100% stainless steel, including the band, housing and screw.
Ideal for clamping barbed fittings,
staking, emergency repairs, etc.
Primary Application
These UV resistant, quality cable
ties have a variety of uses
including dressing cables, hanging pipe, and conduit.
Primary Application
Provides a leak-proof seal for
pipe threads. These quality
Mil-Spec tapes are available
in three sizes.
Primary Application
Heavy weight, multi-purpose
towels are an item all contractors can use.
Features
• Worm gear drive clamps
• Band, housing & screw – All 300
series stainless steel
Models
• CLAMP-08: Size 08 clamp (range
from 0.5" to 0.9")
(1,3 cm to 2,3 cm)
from 0.7" to 1.3")
(1,8 cm to 3,2 cm)
from 0.8" to 1.5")
(2,0 cm to 3,8 cm)
from 1" to 2")
(2,7 cm to 5,0 cm)
from 1.6" to 2.5")
(4,0 cm to 6,4 cm)
from 2" to 3")
(5,2 cm to 7,6 cm)
CLAMP Series
276
Accessories
Features
Features
• Available in 8" (20,3 cm) or 15" • Made from Du Pont ™Teflon ®
• Tape dispenses on plastic
(38,1 cm) lengths
spool with snap on cover
Specifications
• Bar code packaging
• Made from UV resistant black
• Meets or exceeds MIL-Spec
nylon
T-27730A
Models
Model
• TIE8: 8" (20,3 cm) cable tie
• TEFLON-050: 1⁄2" x 520"
• TIE15: 15" (38,1 cm) cable tie
teflon tape (1,3 cm x
13,2 m)
• TEFLON-075: 3⁄4" x 520"
(1,9 cm x 13,2 m) teflon tape
• TEFLON-100: 1" x 520"
(2,5 cm x 13,2 m) teflon tape
TIE8, TIE15
TEFLON-050
www.rainbird.com
Features
• 100% cotton white terry cloth
• Pre-washed and reusable
• Dimensions: 14" x 17"
(3,6 cm x 4,3 cm)
Model
• TOWEL18: Terry towels
TOWEL18
2005 – 2006 Catalog
Accessories
Rain Bird® Irrigation Supplement
IS Series
Primary Application
Rain Bird Irrigation Supplement is water bound in the form of a
solid gel. It is an ideal irrigation supplement for use in establishing
native plant material where permanent irrigation is not required as
well as new plant material in existing landscape areas. Rain Bird
IS increases survival rates of transplants by providing continuous
moisture needed to reduce the stress of relocation.
Features
• Helps new transplants become established in existing landscapes.
Existing vegetation is not subjected to over-watering while trying
to establish the new plant, and the new plant has its own
additional source of water until it becomes established
• Provides moisture around the clock to the root zone where
capillary activity in the soil carries and maintains moisture
throughout the root zone continuously for 30 - 90 days
• 100% all natural, non-toxic and harmless to people and pets. Not
a synthetic polymer
• Provides water to the plant, instead of competing with the plant for
water like polymers
• Available in degradable paper carton with non-toxic, water-based
inks that meet landfill requirements
• Establish healthier trees and shrubs by minimizing transplant
stress
• Eliminates evaporation, runoff and leaching
• Requires little to no maintenance
• Now also available in smaller 30-Day Gel Packs ideal for indoor
plants and hanging baskets
• Disperses water at a consistent rate for up to 90 days (30 days for
IS-GP30). Bacteria naturally found in soil gradually break down the
food grade ingredients and convert Rain Bird IS back into liquid
water at a consistent and steady release rate. The rate at which
the product liquefies varies based on several factors, resulting in a
usage life that could be shorter than the recommended days.
Users are advised to check the product package within 25 - 60
days depending on product model used.
IS-QT
IS-QT-SL
IS-TG
IS-GP
IS-GP30
2005 – 2006 Catalog
www.rainbird.com
Accessories
277
Accessories
IS Series
Continued
General Use Guide
• The recommended number of quarts is based on the needs
of medium water-use plant material. For high water-use plants,
increase number of units by 15-20%.
• Excessive heat, wind, plants with extensive foliage or plants
bearing fruit will require additional watering.
General Use Guide - IS-QT & IS-TG
Container
Size
Seedlings
1-gallon
5-gallon
10-gallon
15-gallon
24" B&B
32" B&B
Height
(ft)
Height Quarts
(m) per Plant
6-8"
1
2
3
4
5
6
7
8
9
10
11
12
14
16
0.30
0.61
0.91
1.22
1.52
1.83
2.13
2.44
2.74
3.05
3.35
3.66
4.27
4.88
1
1–2
2–3
3–4
3–5
4–6
5–7
6–8
7–9
8 – 10
9 – 11
10 – 12
11 – 13
12 – 14
14 – 16
Dimensions
• IS-QT Quart Carton – Width: 2 7⁄8" (7,3 cm), Height: 9" (22,86 cm),
Depth: 2 7⁄8" (2,3 cm)
• IS-TG Tube & Gel Pack – Diameter: 3 7⁄16" (8,73 cm),
Length: 9" (22,86 cm), Cap: 3 1⁄2" (8,89 cm)
• IS-GP30 30-Day Gel Packs – Diameter: 2" (5,08 cm),
Length: 6" (15,24 cm)
Models
• IS-QT: Quart carton
• IS-TG: Tube & Gel Pack
• IS-GP: Gel Packs
• IS-GP30: 30-Day Gel Packs
Optional Features
• IS-QT-SL: Polyethylene sleeve for IS-QT
General Use Guide for IS-GP30
Container
Size (in)
Container
Size (cm)
Number of
Gel Packs
6
8
10
12
14
16
18
20
15,24
20,32
25,4
30,48
35,56
40,64
45,72
50,8
1
1–2
2–3
3–4
3–5
5–6
6–9
6–9
278
Accessories
www.rainbird.com
2005 – 2006 Catalog
Accessories
Lake Management Aerators
Single Pattern
NEW
Primary Application
Rain Bird Lake Management Aerators effectively work to maintain
an ecological balance in lakes or ponds less than 15' (5 m) deep.
The primary reason is that these aerators provide the best vertical
circulation to add dissolved oxygen to the water. This circulation
helps to maintain an ecological balance, which in turn assures
sufficient water quality. With the addition of dissolved oxygen the
water and the resulting convection patterns that reduce
stratification, these surface aeration systems provide a number of
practical and economic benefits. Lake Management Aerators
efficiently work to reduce the costly expenses associated with a
water source that is ecologically out of balance. This helps to avoid
undesirable algae build-up, over growth of weeds, unpleasant odors
and depleted fish population.
• Motor: Custom-built electric motor with dynamically balanced
rotors. Encased in a stainless steel housing that is completely
hidden from view.
• Cable: All units are shipped with 50' (15 m) of underwater cable.
• Screen: 1/4" nylon fine mesh water intake screen for LM10,
LM20 and LM30 models only.
• Power Control Center: Nema 3R rated control center includes
ground fault interrupt; magnetic starter; surge arrestor; power
disconnect; 24-hour on/off timer.
• Warranty: Backed by Rain Bird® Customer Satisfaction Warranty.
• Safety Testing: Components UL and CSA listed; assembly tested
and approved by ETL, ETL-C and CE.
Models
These Lake Management solutions include aerators with
•
aesthetically pleasing plumes and are available with 1-5 HP pumps. LM10: Principal feature is a one-plume geyser-like spray pattern
that rises high into the air
Basic component features include float, motor housing, support
• LM11: Well proportioned fan-shaped spray, it a perfect balance of
arms and power control center.
form and function
Features
• LM20: The dual spray pattern operates at a lower pumping rate.
• All LM units are factory assembled.
• LM30: Differentiating feature is its multi-dimensional three plume
• Heavy-duty 304 stainless steel arms support a float filled with US
design
Coast Guard-approved closed cell foam.
Optional Features
• Stainless steel housing contains a custom-built electric motor,
• 3-light set systems run on 12-volt power and are available with
designed to move high volumes of water and provide years of
65-watt halogen bulbs.
dependable service.
• Unique pumping chamber attaches to the upper plate of the motor • 10 gage cable available in 25' increments
• Colored lenses in red, blue, green and yellow
housing to achieve the highest pumping rates possible under
• Intake screen is optional for LM11.
pressure.
• Deflector plate provides an appealing display.
• Fine mesh screen prevents the intake of debris to allow the
continuous flow of incoming water, and ensures full and
symmetrical spray patterns when in operation.
• LM11 only - virtually unbreakable stainless steel chopper-style
prop.
Specifications
• Unit: Manufactured of corrosion-resistant, 18-8 stainless steel and
high-density thermal plastics. Corrosion resistance allows unit to be
installed in almost all water source types.
• Float: Green exterior shell is made of high-density thermal plastic
polyethylene. The interior of the float is closed-cell polyethylene.
LM11
2005 – 2006 Catalog
www.rainbird.com
Accessories
279
Accessories
Multi-Pattern
NEW
Primary Application
Rain Bird Lake Management Aerators effectively work to maintain
an ecological balance in lakes or ponds less than 15' (5 m) deep.
Primarily installed for their aesthetic appeal, these multi-pattern
aerators also provide limited water quality enhancement in smaller
ponds and lakes. The circulation helps to maintain an ecological
balance, which in turn assures sufficient water quality. With the
addition of dissolved oxygen the water and the resulting
convection patterns that reduce stratification, these surface
aeration systems provide a number of practical and economic
benefits. Lake Management Aerators efficiently work to reduce
the costly expenses associated with a water source that is
ecologically out of balance.
They are available with 1/2 and 3/4 HP pumps. Basic component
features include float, motor housing, impellers/props and mini
power center.
Features
• All LMM units are factory assembled.
• Manufactured entirely of stainless steel and thermal plastics to
provide years of dependable service.
• Stainless steel debris screen prevents the intake of foreign objects
to allow the continuous flow of incoming water, which ensures
aesthetically pleasing spray patterns.
• Mini Power Center is encased in industrial-grade, non-corroding
case to assure reliability.
• Spray pattern can be changed to LM10, LM20 or LM11.
• Diffuser ring allows the spray pattern to be varied in height and
diameter (LMM with LM10 and LM20 patterns only).
Specifications
• Unit: Manufactured of corrosion-resistant, 18-8 stainless steel and
high-density thermal plastics. Corrosion resistance allows unit to be
installed in almost all water source types.
• Float: Black exterior shell is made of high-density thermal plastic
polyethylene. The interior of the float is closed-cell polyethylene.
Each float consists of specially designed float rings, which call the
unit to ride level in the water.
• Motor: Custom-built submersible, water-cooled, corrosion-resistant,
stainless steel motor. Constructed to run continuously and is available in 60 Hz @ 3450 RPM.
• Impellers/Props: Manufactured of polyphenylene oxide, modified.
Material is corrosion-resistant to most all types of water, salt solutions and acids.
• Cable: All units are shipped with 50' (15 m) of underwater cable.
• Mini Power Center: 115V unit controls are enclosed in a 5" x 5" x
4" industrial-grade, all plastic, non-corroding case. 115V controls
consist of 24-hour on/off timer and GFI. 230V units are enclosed in
a 11" x 11" x 6" high-impact, corrosion-resistant thermal plastic,
Nema rated type 3S. 230V unit controls consist of 24-hour on/off
timer, fuse or circuit breaker protection and GFI.
• Screen: Corrosion-resistant 18-8 stainless steel intact screen to
efficiently prevent clogging.
• Warranty: Backed by Rain Bird Customer Satisfaction Warranty.
• Safety Testing: Safety tested and approved as a package by ETL,
ETL-C and CE.
Models
• LMM: Adjust the diffuser ring to change the pattern from LM10, 11
or 20
Optional Features
• 2-light set systems run on 12-volt power and are available with 20watt halogen bulbs. Stainless steel mounting brackets facilitate
installation to achieve a variety of illumination effects.
• 12 gage cable available in 25’ increments
• Colored lenses in red, blue, green and yellow
LMM shown with LM20 pattern selected
280
Accessories
www.rainbird.com
2005 – 2006 Catalog
Spray Heads
Rotary
Nozzles
Resources and Training
Rotors
Impacts
Valves
Controllers
Central
Controls
Pump Stations
Xerigation®
Resources and Training
Accessories
Resources
& Training
Reference
Instructional CD-ROM
Specifications CD-ROM
Landscape Irrigation Spec Draw CD-ROM
Training CD-ROM
Primary Application
This is a great tool to use to
train your new employees.
After completing the CD, the
user should be able to understand a simple irrigation system and specify basic irrigation products. On the CD, you
will find five modules:
• What is Landscape Irrigation?
–this teaches how all of the
components of an irrigation
system work together
• Introduction to Controllers
• Introduction to Valves
• Introduction to Rotors
• Introduction to Spray Heads
Primary Application
Detailed drawings show the
correct way to install Rain Bird’s
products. The drawings are
provided in four formats: DWG
for AutoCad, DXF for other Cad
programs, JPG for internet
browsers and WMF for Word or
PowerPoint documents. The CD
also contains written specifications for products, and sports
field layouts in DWG and PDF
formats. The item number is
D37274A.
Literature CD-ROM
Xerigation CD-ROM
Tools to Install
Confidence CD-ROM
Xerigation®
Resource Kit
Primary Application
This CD-ROM contains Rain Bird
literature including catalogs, tech
specs, instruction manuals,
brochures, product fact reports
and customizable homeowner’s
literature. Literature in Spanish
may also be found on this CD.
All literature materials are in PDF
format and may be printed for
your convenience. The item
number is D37201-10-04.
Primary Application
This CD-ROM makes drip easy.
It is a collection of literature and
tools from Rain Bird’s
Landscape Drip Division.
Included are more than 90 minutes of training videos, catalogs,
installation and design guides,
tech specs, detail drawings, and
electronic presentations. Also
included are Xericalc™ Basic
and Xericalc Pro, two new software programs that calculate
plant water requirements and
drip zone run times, and make
selecting the right Rain Bird drip
product a snap. The item number for this disk is D39445.
Each module is divided into
two to four lessons describing
how the product works within
an irrigation system and how
to specify the products to meet
the needs of the job site. At the
end of each module there is a
course exam and once the
exam is complete, the user is
able to print a customized certificate of completion. The
item number is D37251.
Landscape Irrigation
Training CD-ROM
282
Spec Draw CD-ROM
Tools to Install
Confidence CD-ROM
www.rainbird.com
Xerigation Resource Kit
2005 – 2006 Catalog
Business Management Software
Rain Bird ® Pro™ Software
Primary Application
Rain Bird Pro software is a business management system for
scheduling, dispatching, inventory control, and billing. It allows
contractors to increase customer satisfaction, improve employee
productivity, and gain additional revenue. Designed specifically for
the irrigation industry, Rain Bird Pro software improves the efficiency of the scheduling process and ties crews electronically to
the office using handheld devices (PDAs). Rain Bird Pro software
increases profit without adding new customers or employees.
Rain Bird Pro software can be purchased or leased from Rain Bird
for a monthly or annual subscription fee. This fee is based on the
number of crews you want the software to support. Initial installation support, technical support and all upgrades are included in the
subscription fee.
Features
Benefits - In the Office
• Reduces customer phone time by 50%. Service call scheduling
and estimating are done in the work order screen while speaking
to the customer. This dramatically reduces customer phone time.
• Improves inventory management. Invoices parts used immediately
by downloading them directly into accounting software.
• Rain Bird Pro can be simultaneously used by up to 10 computers
at once without additional licenses or costs.
• Use Windows to automatically back up Rain Bird Pro through convenient backup option in the menu, keeping your data available
and safe.
• Rain Bird Pro now offers multiple billing options to accommodate
varying user billing needs and allows for customer billing within
24 hours.
• Update daily time card payroll information directly to Quickbooks
and Master Builder, eliminating double data entry and improving
office efficiency.
• Larger customer notes area to record and track additional
information about contacts with daily automatic pop-up reminders.
• Customer accounts receivable information is readily displayed on
the scheduling screen when using QuickBooks, AccPac or Simply
Accounting software.
• New easier way to track and control work orders by merging
multiple days work into one work order.
• Train your staff at your convenience through live interactive support on the web.
2005 – 2006 Catalog
www.rainbird.com
How it Works
• Customers call and office personnel
schedule work orders.
• Customer locations are used to
automatically assign field crews.
• Field crews upload daily work orders
to their handheld devices via standard phone lines.
• Crews access work order details,
record time in/out, and input parts
used for that day’s work orders.
• Field crews download completed
work orders to the office computer.
• Office staff downloads completed
work orders to accounting software.
• Office staff creates, reviews and
mails customer billing.
• Payroll timecards can also be tied to
completed work order.
283
Rain Bird ® Pro™ Software
Continued
Benefits - In the Field
• Provides more timely and accurate information through handheld devices. Crews download their daily schedule to personal
handheld devices by simply plugging into a phone line connector at home or the office. Downloading at home allows employees to go directly to their first service call.
• Compatible with Pocket PC and Palm hand held devices to use
in the field.
• Work order recap showing time and materials with total costs
on the PDA device.
• PDA message flags notify technicians to view message prior to
beginning work.
• Create and print invoices in the field using infrared portable
printers.
• Quick field data entry using categorized canned field remarks
selected as needed per work order.
• Daily vehicle mileage information available to manage
maintenance schedules.
• User defined information fields can be edited in field to update
customer information.
• Estimating work order feature on the PDA allows crews to provide this service in the field.
Work Order ScreenCrew Schedule
284
www.rainbird.com
2005 – 2006 Catalog
Training
Rain Bird Irrigation Training 1
Primary Application
Rain Bird is committed to training and improving the irrigation
knowledge of contractors, system designers, distributors, irrigation
technicians, landscape architects, and public agencies. Many
diverse programs are offered to cover topics important to irrigation
professionals. Get instruction from Irrigation Industry Certified
Trainers on various field installation techniques and troubleshooting
irrigation systems. Courses are available in English and Spanish.
Electrical Troubleshooting - 4 Hours
The procedures and advice taught in this course cover everything
from electrical basics to using a digital multi-meter for
troubleshooting in the field. Learn the best methods of efficiently
testing and isolating wire faults, bad solenoids, and controller
problems. This class is tailored to bring entry-level personnel up to
speed quickly and provide several refresher tips for more
experienced professionals.
Controller Programming & Troubleshooting, Ground Fault
Locating, and Wire Tracing - 4 Hours
Discover everything you need to know about the basics of
programming, scheduling, and troubleshooting your controller. Apply
fundamental theories in grounding controllers and surge protection
to safeguard entire irrigation systems from damage. Wire tracing
techniques will be conducted to resolve problems related to wire
faults. This class is tailored to bring entry-level personnel up to
Basic Hydraulics and Design - 4 Hours
Professionals walk you through step-by-step methods of the
irrigation design process, from basic hydraulics to calculating
system requirements. Learn techniques for sprinkler layout,
calculating precipitation rates and irrigation scheduling. This class
is tailored to bring entry-level personnel up to speed quickly and
provide several refresher tips for more experienced professionals.
Advanced Design - 1 Day
The key to popularity of this course is its "practice what you learn"
approach. Throughout the day, there is the opportunity to perform
practical exercises in residential design and drip design
applications. Gain and reinforce the following concepts:
• Hydraulics
• Determining irrigation requirements
• Selecting sprinklers and spacing ranges
• Locating valves
• Proper layout of valve groups
• Sizing pipe and valves
• Calculating system pressure requirements
• Site location of controllers
• Preparing a final irrigation plan
Spray Head, Rotor & Valve Troubleshooting - 4 Hours
This practical, hands-on class is a must for maximizing day-to-day
efficiency and long-term reliability of your customer's systems.
Learn the most effective ways to troubleshoot spray heads, rotors
and impacts and begin with a thorough examination of valve
operations. This class is tailored to bring entry-level personnel up to
1
Training classes are conducted by Rain Bird Services Corporation. For a class
schedule or to register, go to: www.rainbird.com/landscape/training/index.htm.
Rain Bird can also provide customized training to fit individual organization's
needs. Contact us at [email protected] or 520-741-6178.
2005 – 2006 Catalog
www.rainbird.com
285
Rain Bird Irrigation Training
Continued
Landscape Drip/Xerigation - 4 Hours
This class provides hands-on practice and insight on how to
efficiently design and install effective landscape drip irrigation
systems. Attendees learn the four key elements of drip design:
system layout, system hydraulics, product selection, and
scheduling. Don't let drip irrigation design confuse you; it can be
a dynamic water saver and problem solver.
Bidding & Estimating/Contract Writing - 4 Hours
This course combines two essential aspects of winning jobs:
contract writing with bidding and estimating. Show customers
your company is a professional contender for their landscape and
irrigation business by providing a clear and concise contract.
Sample contracts will be discussed. The class includes general
pricing, warranties, customer service, marketing strategies,
pricing, and profits. Several industry standard-pricing methods
will be discussed.
Irrigation Contractor Course - 2 Days
This course deals directly with the issue of wise water
management. Students learn how to perform field tests on
irrigation systems to determine their efficiency, and how to
combine plant water use, soils and local weather data to
calculate accurate water schedules. Also included is a review of
advanced soil water plant relationships, advanced hydraulics,
pumps, job safety requirements, national codes affecting our
industry, scheduling, water conservation, and system uniformity
and efficiency details. This class is designed to refresh irrigation
contractor skills; may also serve as a good review for the
Irrigation Association CIC exam.
Spanish Phrases for English Speakers - 4 Hours
Communication is key when working with sub-contractors and
work crews. The last thing you need is a language barrier when a
job has to be finished quickly and efficiently. This course covers
basic Spanish phrases commonly used and needed in the Green
Industry.
Intelligent Use of Water - 4 Hours
The need to conserve water has never been greater. Through
experience and case studies, we can make every drop count. This
class provides an overview on how to use water intelligently in the
following areas: Proper soil types and structure, type of plants,
water efficient irrigation products, sensors and moisture
equipment, assessing irrigation systems, auditing and basic water
scheduling.
Authorized Service Center Program Courses
Developed to enhance after-sales service of Rain Bird products, the
Authorized Service Center (ASC) program has three training levels:
• ASC Basic Level - 2 Days
Basic ASC level is achieved by completing Electrical
Troubleshooting, Controller Programming & Troubleshooting, Spray
Head, Rotor & Valve Troubleshooting, and Basic Hydraulics and
Design (see descriptions) or attending Professional Irrigation
Training Camp events (PITC). Call for more details.
• ASC Premium Level - 2 Days
Take your knowledge of controllers and your repair skills to the
next level of sophistication with this intensive course. Training
begins with the basics of electronics theory and component
identification, along with how to read schematics and soldering
techniques. This course focuses on electromechanical and solidstate controller repairs.
• ASC Technical Repair Center - 1 Day
Become one of the best in the field of controller repair with this
course by studying advanced solid-state controller troubleshooting
and circuit board-level repair.
286
www.rainbird.com
2005 – 2006 Catalog
MDC Decoder System - 6 Hours
Learn proper hands-on installation, troubleshooting and
programming skills. Installation includes proper wiring, splicing and
system configuration. Attendees are taught how to use a clamp
meter to perform proper troubleshooting methods and how to
program the controller and operate software.
IM Controller - 4 Hours
Learn to manage water with this advanced stand-alone controller.
This course will cover proper ET and water budget programming
along with the use of sensors.
Site Control / Central Control - 1 Day
Site Control Training is the basic class for the person responsible
for the programming, monitoring, and reporting of irrigation
operations. This basic class introduces users to the software and
its primary functions related to basic irrigation operation. Emphasis
is placed on programming, scheduling, and monitoring the
irrigation process. This course requires that the user have a
working knowledge of the Windows 98, 2000, or XP.
Maxicom ® Central Control Hardware Level 1 - 2 Days
Basic Installer Training is the beginning step for the contractor
engaged in the business of central control irrigation system
installation. This training introduces and defines the role of the
system hardware components. Hands-on installation activities with
the central controller, Site SAT, Cluster Control Unit, Satellite and
flow sensors are included. The participant should have a prior
working knowledge of the landscape irrigation system including
sprinkler, valve and controller installation.
2005 – 2006 Catalog
Maxicom ® Central Control Software Level 1 - 2 Days
Basic Operator Training is the second step for the person
responsible for central control system programming, monitoring and
reporting. This training will introduce the participant to the software
and it's primary functions related to basic irrigation operation,
monitoring, programming and reporting only. Scheduling complexity
is equal to that of a stand-alone irrigation controller program. This
course requires that the attendee have a working knowledge of
Windows 98/2000.
Intermediate Installer Training is the second step for the contractor
installation. This training includes all components in the Basic
Installer Training with the addition of the weather station, site rain
can, anemometer and the Freedom System.
Intermediate Operator Training is designed for the person
responsible for central control system programming, monitoring and
reporting. This training covers ET based irrigation scheduling, “Flow
Manager”, “Flow Watch”, “Rain Watch”, and “Wind Watch”
programming. Freedom System operation is included. Scheduling
complexity addresses sophisticated mainline networks and issues
related to excessive flow detection, rainfall and wind response.
www.rainbird.com
287
Rain Bird Irrigation Training
Continued
Advanced Installer Training is the third step for the contractor
installation. This training includes our highest level of hands-on
installation activities with all central control components including
the items from all prior levels as well as Site Survey equipment,
Spread Spectrum modems and pump station integration with the
central control system. Additionally, the training focuses on earth
ground testing, wire tracking, coax/cable splicing, maintenance
and troubleshooting.
Water Manager Training is designed for the person engaged in
the business of irrigation system management and monitoring.
This training covers advanced programming, monitoring and
reporting functions common to the business of irrigation water
management. This training involves discussions of soil, plant and
water relationships and advanced ET based irrigation scheduling.
Exercises will deal with programming for a water shortage, flow
monitoring and reporting, and reaction to environment and
atmospheric input.
288
www.rainbird.com
2005 – 2006 Catalog
Spray Heads
Rotary
Nozzles
Rotors
Impacts
Valves
Controllers
Reference
Central
Controls
Pump Stations
Xerigation®
Accessories
Reference
Resources
& Training
Reference
Reference
Beneficial Advantages of Non-potable Water
Water is our planet's most precious resource, and using non-potable
water is an integral part of conserving this limited resource. Recycling
water can lower potable water demand, recharge ground water and
postpone expensive development of new water sources that include
reservoirs and wells. Non-potable water can also save money and
contribute aesthetic value through ponds, lagoons and fountains
incorporated into the landscape setting.
Rain Bird is committed to The Intelligent Use of Water ™ and is
dedicated to providing products that further water conservation
and its critical role in the environment. For more information about
Rain Bird products specially designed for use with non-potable
water, please visit www.rainbird.com.
Rain Bird Products Specifically
Designed for use with Non-potable Water
®
Purple Covers for Spray Heads:
1800 Series and UNI-Spray ™ Series
Purple Plastic Shrub Adapter
®
®
Purple Covers for Rotors:
3500, 5000/5000 Plus,
5500, R-50, Falcon 6504,
7005, 8005 and 2045A Maxi-Paw ™
®
Purple Handles for Valves:
PGA, PEB/PESB,
EFB-CP, GB and BPE/BPES
Purple Landscape
Dripline
Quick Coupling Valves with
Locking Purple Covers:
33DNP, 44NP and 5NP
1" Control Zone Kit
Purple Valve Box Lids
Purple Flush Cap
with Fitting
290
Reference
www.rainbird.com
2005 – 2006 Catalog
Reference
Anatomy of a Non-potable Water
Irrigation System1
Pictured here is a system drawing showing Rain Bird ® non-potable
products. Properly installed and maintained, a non-potable irrigation
system supports healthy, stress-free plant growth, without depleting
much needed potable water resources around the world.
Falcon 6504 NP Covers
F4-FC-NP
F4-PC-NP
F4-FC-SS-NP
F4-PC-SS-NP
®
Maxi-Paw NP Covers
2045A Maxi-Paw-NP
2045A Maxi-Paw-SAM-NP
™
8005 NP Cover
(8005 Series)
BPE-NP-HAN
7005 NP Cover
(NP Handles for 3" BPE
and BPES valves)
(7005 Series)
5500 NP Cover
(5500 Series)
5000 NP Cover
VB-JMBP
(5000/5000 Plus Series)
(Jumbo Box
& Purple Lid)
3500 NP Cover
(3500 Series)
VB-JMBP-H
(Jumbo Box &
Purple Lid + Lock)
PA-8S-NP
(Plastic Shrub Adapter)
1800 NP Clip-On Cover
PGA-NP-HAN
(NP Handles for 1"
and 1 1/2" PGA valves)
PGA-NP-HAN2
(NP Handles for
2" PGA valves)
(1800 Series)
®
VB-STDP
US NP Cover
(Standard Box
& Purple Lid)
(UNI-Spray )
™
VB-STDP-H
(Standard Box &
Purple Lid + Lock)
EFB-GB-NP-HAN
(NP Handles for all GB
and EFB-CP valves)
33DNP
44NP
5NP
VB-STDP-6
(Standard 6" Box
& Purple Lid)
Purple
Landscape Dripline
(Locking NP Lids for Quick
Coupling valves)
XCZ-100-B-COM
(1" Control Zone Kit)
Non-potable
Water Source
MDCFPCAP/
MDCFCOUP
(Purple Flush
Cap with Fitting)
VB-10RNDP
(10" Round Box
& Purple Lid)
VB-10RNDP-H
(10" Round Box &
Purple Lid + Lock)
PEB-NP-HAN1
Black Stripe
Tubing with
Emission
Devices
(NP Handles for 1" PEB
and PESB valves)
PEB-NP-HAN2
(NP Handles for 1 1/2" &
2" PEB and PESB valves)
1
System drawing is for illustration purposes only.
2005 – 2006 Catalog
www.rainbird.com
Reference
291
Reference
Controller Power Wire Sizing
117 Volt Primary Wire Sizing Procedure
Procedure
Example
Power
Source
RC-7C with 2
Valves Per Station
1000' (actual length)
2000' (actual length)
1. Determine current requirements of controller unit, master valve,
and station valves from electrical current requirement chart.
1. Controller Primary Current Requirements
(from electrical current requirement chart):
RC-7C controller only
2 solenoid valves (2 x .07)
Total
.13
.14
.27 Amps
2. Determine maximum allowable voltage drop.
a. Determine voltage at power source
b. Determine voltage desired at controller
(limits: 105V minimum and 128V maximum)
2. Maximum allowable voltage drop:
a. Power source = 119V
b. Desired voltage at controller (min) = 112V
Volts drop allowable = 119V - 112V = 7V
3. Calculate equivalent circuit length.
3. Equivalent circuit length:
1 (Controller A) x 1000'
2 (Controller A & B) x 2000'
Total
4. Using formula, calculate “F” factor:
4.
F = Allowable Voltage Drop
Amps (per unit) x Equiv. Length (in 1000s of feet)
F = 7V
.27 Amps x 5
5. Select power wire size from wire size chart (select wire size
with an “F” factor equal to or less than the calculated “F” factor).
Electrical Current Requirements
Controllers and Valves
Wire Size
Type of Controller
or Valve
Controllers
Only
117 Volt Primary Current
Requirements (Amps)
With Power On
Not in a Cycle
Wire Size
“F” Factor
RC-Bi
RC-C
ESP
ESP-Si
E-Class
Ec
ESP-LXi+
ESP-LX+
ESP-MC
IM
0.13
0.13
0.03
0.06
0.06
0.07
0.15
0.15
0.18
0.20
#18
#16
#14
#12
#10
#8
#6
#4
13.02
8.18
5.16
3.24
2.04
1.28
0.81
0.51
Valves
Only
Current Draw
When Energized
Solenoid Valve
0.07
292
Reference
= 1000'
= 4000'
= 5000' = 5.0 (in 1000s of feet)
= 5.19
5. Wire size required: From wire size chart select size #14 wire
(chart value = 5.16)
www.rainbird.com
2005 – 2006 Catalog
Reference
Controller Power Wire Sizing
Determining Maximum Number of Valves
Per Station of a Controller
Procedure
Example
Determine maximum number of solenoid valves which
may be operated per station of an RC-7C controller using
a master valve:
1. From secondary current requirement chart, determine the
maximum secondary current (Amps) allowable for the model
controller selected.
1. From secondary current requirement chart, maximum secondary
current allowable:
RC-7C = 1.5 Amps
2. Determine the secondary current requirement of the controller
only and the master valve (if a master valve is being used).
2. Secondary current requirement for controller and master valve:
RC-7C controller only
Solenoid master valve
Total
.35
.23
.58
3. Calculate the remaining current available for valve operation:
maximum secondary current allowable minus the current for
controller master valve.
3. Remaining current available:
4. Number of valves per station equals:
4. Maximum number of solenoid valves per station:
Remaining Available Current
Current Required for 1 Valve
1.5 - .58 = .9 Amps
.92 Amps (available) = 4.00
.23 Amps/Solenoid
Secondary Current Requirements for Controllers and Valves
Note: Since the resulting value is a maximum, the number of solenoid
Determining maximum number and combinations of valves per station
valves used per station should always be rounded down to the nearest whole
Type of
Controller
or Valve
117 Volt Primary
Current Requirements
(Amps)
Controllers
Only
With Power On
Not in a Cycle
24 Volt Secondary
Current Requirement
(Amps)
Maximum number of
Solenoids per Station
as the Specification
RC-Bi
RC-C
ESP
ESP-Si
E-Class
Ec
ESP-LXi+
ESP-LX+
ESP-MC
IM
1.25
1.50
1.50
1.00
0.65
0.65
1.25
1.50
2.50
2.90
0.35
0.35
0.03
0.03
0.07
0.05
0.09
0.09
0.02
0.02
2
2
2
1
1
1
2
2
2
8
number.
Valves
Solenoid Valve
0.23
* Including controller, master valve, and maximum number of valves on a station.
** Requires .41 Amps in-rush for one valve.
2005 – 2006 Catalog
www.rainbird.com
Reference
293
Reference
PVC Class 160 IPS Plastic Pipe
(1120, 1220) SDR 26 C=150
psi Loss Per 100 Feet of Pipe (psi/100 ft.)
▲
1 1/2"
1.900
1.754
0.073
Sizes 1" through 6" Flow 1 through 600 GPM
Size
O.D.
I.D.
Wall Thk
1"
1.315
1.195
0.06
Flow GPM
1
2
3
4
5
6
7
8
9
10
11
12
14
16
18
20
22
24
26
28
30
35
40
45
50
55
60
65
70
75
80
85
90
95
100
110
120
130
140
150
160
170
180
190
200
225
250
275
300
325
350
375
400
425
450
475
500
550
600
Velocity fps
0.28
0.57
0.85
1.14
1.42
1.71
1.99
2.28
2.57
2.85
3.14
3.42
3.99
4.57
5.14
5.71
6.28
6.85
7.42
7.99
8.57
9.99
11.42
12.85
14.28
15.71
17.14
18.57
19.99
1 1/4"
1.660
1.532
0.064
psi Loss
0.02
0.06
0.14
0.23
0.35
0.49
0.66
0.84
1.05
1.27
1.52
1.78
2.37
3.04
3.78
4.59
5.48
6.44
7.47
8.57
9.74
12.95
16.59
20.63
25.07
29.91
35.14
40.76
46.76
Velocity fps
0.17
0.34
0.52
0.69
0.86
1.04
1.21
1.39
1.56
1.73
1.91
2.08
2.43
2.78
3.12
3.47
3.82
4.17
4.51
4.86
5.21
6.08
6.95
7.82
8.69
9.56
10.43
11.29
12.16
13.03
13.90
14.77
15.64
16.51
17.38
19.12
psi Loss
0.01
0.02
0.04
0.07
0.11
0.15
0.20
0.25
0.31
0.38
0.45
0.53
0.71
0.91
1.13
1.37
1.64
1.92
2.23
2.56
2.91
3.87
4.95
6.16
7.49
8.93
10.49
12.17
13.96
15.86
17.88
20.00
22.23
24.58
27.03
32.24
Velocity fps
0.13
0.26
0.39
0.53
0.66
0.79
0.92
1.06
1.19
1.32
1.45
1.59
1.85
2.12
2.38
2.65
2.91
3.18
3.44
3.71
3.97
4.64
5.30
5.96
6.63
7.29
7.95
8.62
9.28
9.94
10.60
11.27
11.93
12.59
13.26
14.58
15.91
17.24
18.56
19.89
psi Loss
0.00
0.01
0.02
0.04
0.05
0.08
0.10
0.13
0.16
0.20
0.23
0.28
0.37
0.47
0.58
0.71
0.85
1.00
1.15
1.32
1.50
2.00
2.56
3.19
3.88
4.62
5.43
6.30
7.23
8.21
9.25
10.35
11.51
12.72
13.99
16.69
19.61
22.74
26.09
29.64
2"
2.375
2.193
0.091
2 1/2"
2.875
2.655
0.110
3"
3.500
3.230
0.135
4"
4.500
4.154
0.173
6"
6.625
6.115
0.225
Velocity fps psi Loss
0.28
0.33
0.37
0.42
0.47
0.52
0.56
0.61
0.66
0.70
0.82
0.94
1.06
1.18
1.30
1.41
1.53
1.65
1.77
1.89
2.00
2.12
2.24
2.36
2.60
2.83
3.07
3.31
3.54
3.78
4.01
4.25
4.49
4.72
5.31
5.91
6.50
7.09
7.68
8.27
8.86
9.45
10.04
10.63
11.23
11.82
13.00
14.18
0.38
0.43
0.49
0.54
0.60
0.65
0.70
0.76
0.81
0.87
0.92
0.98
1.03
1.09
1.20
1.30
1.41
1.52
1.63
1.74
1.85
1.96
2.07
2.18
2.45
2.72
3.00
3.27
3.54
3.81
4.09
4.36
4.63
4.90
5.18
5.45
6.00
6.54
0.16
0.25
0.33
0.42
0.50
0.59
0.67
0.76
0.84
0.93
1.01
1.18
1.35
1.52
1.69
1.86
2.03
2.20
2.37
2.54
2.96
3.39
3.81
4.24
4.66
5.09
5.51
5.93
6.36
6.78
7.21
7.63
8.05
8.48
9.33
10.18
11.02
11.87
12.72
13.57
14.42
15.27
16.11
16.96
19.08
0.00
0.01
0.01
0.02
0.03
0.03
0.04
0.05
0.07
0.08
0.09
0.12
0.16
0.20
0.24
0.29
0.34
0.39
0.45
0.51
0.68
0.86
1.08
1.31
1.56
1.83
2.12
2.44
2.77
3.12
3.49
3.88
4.29
4.72
5.63
6.61
7.67
8.80
10.00
11.27
12.61
14.02
15.49
17.03
21.19
0.23
0.28
0.34
0.40
0.46
0.52
0.57
0.63
0.69
0.81
0.92
1.04
1.15
1.27
1.38
1.50
1.62
1.73
2.02
2.31
2.60
2.89
3.18
3.47
3.76
4.05
4.34
4.63
4.91
5.20
5.49
5.78
6.36
6.94
7.52
8.10
8.68
9.26
9.83
10.41
10.99
11.57
13.02
14.47
15.91
17.36
18.81
0.00
0.01
0.01
0.01
0.02
0.02
0.03
0.03
0.04
0.05
0.06
0.08
0.09
0.11
0.13
0.15
0.18
0.20
0.27
0.34
0.42
0.52
0.62
0.72
0.84
0.96
1.09
1.23
1.38
1.53
1.69
1.86
2.22
2.61
3.03
3.47
3.94
4.45
4.97
5.53
6.11
6.72
8.36
10.16
12.12
14.24
16.51
0.22
0.27
0.31
0.35
0.39
0.43
0.46
0.54
0.62
0.70
0.78
0.86
0.93
1.01
1.09
1.17
1.36
1.56
1.75
1.95
2.15
2.34
2.54
2.73
2.93
3.12
3.32
3.51
3.71
3.91
4.30
4.69
5.08
5.47
5.86
6.25
6.64
7.03
7.43
7.82
8.79
9.77
10.75
11.73
12.70
13.68
14.66
15.64
16.62
17.59
18.57
19.55
0.00
0.01
0.01
0.01
0.01
0.01
0.01
0.02
0.02
0.03
0.04
0.04
0.05
0.06
0.07
0.08
0.10
0.13
0.16
0.20
0.24
0.28
0.32
0.37
0.42
0.47
0.53
0.59
0.65
0.72
0.86
1.01
1.17
1.34
1.52
1.71
1.92
2.13
2.35
2.59
3.22
3.91
4.67
5.49
6.36
7.30
8.29
9.35
10.46
11.62
12.85
14.13
0.00
0.01
0.01
0.01
0.01
0.01
0.02
0.02
0.02
0.02
0.03
0.04
0.05
0.06
0.07
0.08
0.09
0.11
0.12
0.14
0.16
0.17
0.19
0.21
0.25
0.30
0.34
0.39
0.45
0.50
0.56
0.63
0.69
0.76
0.95
1.15
1.37
1.61
1.87
2.15
2.44
2.75
3.07
3.42
3.78
4.15
4.96
5.82
Note: Dark shaded area of chart indicates velocities over 5' per second. Use with caution.
Q
Velocity of flow values are computed from the general equation V = .408 d 2
1.852
Friction pressure loss values are computed from the equation: hf = 0.2083 100
1.852 Qd4.866
x.433 for psi loss per 100' of pipe
c
[
294
Reference
( )
]
www.rainbird.com
2005 – 2006 Catalog
0.00
0.01
0.01
0.01
0.01
0.01
0.01
0.02
0.02
0.02
0.02
0.03
0.03
0.03
0.04
0.05
0.05
0.06
0.07
0.08
0.09
0.10
0.11
0.12
0.14
0.18
0.21
0.25
0.29
0.33
0.37
0.42
0.47
0.52
0.58
0.63
0.76
0.89
Reference
(1120, 1220) SDR 21 C=150
Sizes 3/4" through 6" Flow 1 through 600 GPM
Size
O.D.
I.D.
Wall Thk
Flow GPM
3/4"
1.050
0.930
0.060
1"
1.315
1.189
0.063
1
2
3
4
5
6
7
8
9
10
11
12
14
16
18
20
22
24
26
28
30
35
40
45
50
55
60
65
70
75
80
85
90
95
100
110
120
130
140
150
160
170
180
190
200
225
250
275
300
325
350
375
400
425
450
475
500
550
600
0.47
0.94
1.42
1.89
2.36
2.83
3.30
3.77
4.25
4.72
5.19
5.66
6.60
7.55
8.49
9.43
10.38
11.32
12.27
13.21
14.15
16.51
18.87
0.28
0.57
0.86
1.15
1.44
1.73
2.02
2.30
2.59
2.88
3.17
3.46
4.04
4.61
5.19
5.77
6.34
6.92
7.50
8.08
8.65
10.10
11.54
12.98
14.42
15.87
17.31
18.75
0.06
0.22
0.46
0.79
1.20
1.68
2.23
2.85
3.55
4.31
5.15
6.05
8.05
10.30
12.81
15.58
18.58
21.83
25.32
29.04
33.00
43.91
56.23
0.02
0.07
0.14
0.24
0.36
0.51
0.67
0.86
1.07
1.30
1.56
1.83
2.43
3.11
3.87
4.71
5.62
6.60
7.65
8.78
9.98
13.27
17.00
21.14
25.70
30.66
36.02
41.77
▲
1 1/4"
1.660
1.502
0.079
0.18
0.36
0.54
0.72
0.90
1.08
1.26
1.44
1.62
1.80
1.98
2.17
2.53
2.89
3.25
3.61
3.97
4.34
4.70
5.06
5.42
6.32
7.23
8.13
9.04
9.94
10.85
11.75
12.65
13.56
14.46
15.37
16.27
17.18
18.08
19.89
0.01
0.02
0.04
0.08
0.12
0.16
0.22
0.28
0.34
0.42
0.50
0.59
0.78
1.00
1.24
1.51
1.80
2.12
2.46
2.82
3.20
4.26
5.45
6.78
8.24
9.83
11.55
13.40
15.37
17.47
19.68
22.02
24.48
27.06
29.76
35.50
1 1/2"
1.900
1.720
0.090
0.13
0.27
0.41
0.55
0.68
0.82
0.96
1.10
1.24
1.37
1.51
1.65
1.93
2.20
2.48
2.75
3.03
3.30
3.58
3.86
4.13
4.82
5.51
6.20
6.89
7.58
8.27
8.96
9.65
10.34
11.03
11.72
12.41
13.10
13.79
15.17
16.54
17.92
19.30
0.00
0.01
0.02
0.04
0.06
0.08
0.11
0.14
0.18
0.22
0.26
0.30
0.40
0.52
0.64
0.78
0.93
1.09
1.27
1.46
1.66
2.20
2.82
3.51
4.26
5.09
5.97
6.93
7.95
9.03
10.18
11.39
12.66
13.99
15.39
18.36
21.57
25.02
28.70
2"
2.375
2.149
0.113
0.17
0.26
0.35
0.44
0.53
0.61
0.70
0.79
0.88
0.97
1.06
1.23
1.41
1.59
1.76
1.94
2.12
2.29
2.47
2.65
3.09
3.53
3.97
4.41
4.85
5.30
5.74
6.18
6.62
7.06
7.50
7.95
8.39
8.83
9.71
10.60
11.48
12.36
13.25
14.13
15.01
15.90
16.78
17.66
19.87
0.00
0.01
0.01
0.02
0.03
0.04
0.05
0.06
0.07
0.09
0.10
0.14
0.17
0.22
0.26
0.32
0.37
0.43
0.49
0.56
0.75
0.95
1.19
1.44
1.72
2.02
2.35
2.69
3.06
3.44
3.85
4.28
4.74
5.21
6.21
7.30
8.47
9.71
11.04
12.44
13.91
15.47
17.10
18.80
23.38
2 1/2"
2.875
2.601
0.137
0.18
0.24
0.30
0.36
0.42
0.48
0.54
0.60
0.66
0.72
0.84
0.96
1.08
1.20
1.32
1.44
1.56
1.68
1.80
2.11
2.41
2.71
3.01
3.31
3.61
3.92
4.22
4.52
4.82
5.12
5.42
5.72
6.03
6.63
7.23
7.84
8.44
9.04
9.64
10.25
10.85
11.45
12.06
13.56
15.07
16.58
18.09
19.60
0.00
0.01
0.01
0.01
0.01
0.02
0.02
0.03
0.03
0.04
0.05
0.07
0.09
0.10
0.12
0.15
0.17
0.19
0.22
0.29
0.38
0.47
0.57
0.68
0.80
0.93
1.06
1.21
1.36
1.52
1.69
1.87
2.06
2.45
2.88
3.34
3.84
4.36
4.91
5.50
6.11
6.75
7.43
9.24
11.23
13.39
15.74
18.25
3"
3.500
3.166
0.167
0.24
0.28
0.32
0.36
0.40
0.44
0.48
0.56
0.65
0.73
0.81
0.89
0.97
1.05
1.13
1.22
1.42
1.62
1.83
2.03
2.23
2.44
2.64
2.84
3.05
3.25
3.45
3.66
3.86
4.07
4.47
4.88
5.29
5.69
6.10
6.51
6.91
7.32
7.73
8.14
9.15
10.17
11.19
12.21
13.22
14.24
15.26
16.28
17.29
18.31
19.33
0.00
0.01
0.01
0.01
0.01
0.01
0.02
0.02
0.03
0.03
0.04
0.05
0.06
0.07
0.07
0.09
0.11
0.14
0.18
0.22
0.26
0.31
0.36
0.41
0.46
0.52
0.59
0.65
0.72
0.79
0.94
1.11
1.29
1.47
1.68
1.89
2.11
2.35
2.60
2.85
3.55
4.31
5.15
6.05
7.01
8.05
9.14
10.30
11.53
12.81
14.16
4"
4.500
4.072
0.214
6"
6.625
5.993
0.316
0.29
0.34
0.39
0.44
0.49
0.54
0.59
0.63
0.68
0.73
0.86
0.98
1.10
1.23
1.35
1.47
1.59
1.72
1.84
1.96
2.09
2.21
2.33
2.46
2.70
2.95
3.19
3.44
3.69
3.93
4.18
4.42
4.67
4.92
5.53
6.15
6.76
7.38
7.99
8.61
9.22
9.84
10.45
11.07
11.68
12.30
13.53
14.76
0.34
0.39
0.45
0.51
0.56
0.62
0.68
0.73
0.79
0.85
0.90
0.96
1.02
1.07
1.13
1.24
1.36
1.47
1.59
1.70
1.81
1.93
2.04
2.15
2.27
2.55
2.83
3.12
3.40
3.69
3.97
4.25
4.54
4.82
5.11
5.39
5.67
6.24
6.81
0.00
0.01
0.01
0.01
0.01
0.01
0.02
0.02
0.02
0.02
0.03
0.04
0.05
0.06
0.08
0.09
0.10
0.12
0.14
0.15
0.17
0.19
0.21
0.23
0.28
0.33
0.38
0.43
0.49
0.55
0.62
0.69
0.76
0.84
1.04
1.27
1.51
1.78
2.06
2.36
2.69
3.03
3.39
3.77
4.16
4.58
5.46
6.42
0.00
0.01
0.01
0.01
0.01
0.01
0.01
0.02
0.02
0.02
0.02
0.03
0.03
0.03
0.04
0.04
0.05
0.06
0.07
0.08
0.08
0.09
0.11
0.12
0.13
0.16
0.19
0.23
0.27
0.31
0.36
0.41
0.46
0.52
0.57
0.63
0.70
0.83
0.98
Q
1.852
1.852 Qd4.866
c
[
2005 – 2006 Catalog
( )
]
www.rainbird.com
Reference
295
Reference
(1120, 1220) SDR 13.5 C=150
Size
1/2"
O.D.
0.840
I.D.
0.716
Wall Thk 0.062
Flow GPM Velocity fps psi Loss
3/4"
1.050
0.894
0.078
1"
1.315
1.121
0.097
1
2
3
4
5
6
7
8
9
10
11
12
14
16
18
20
22
24
26
28
30
35
40
45
50
55
60
65
70
75
80
85
90
95
100
110
120
130
140
150
160
170
180
190
200
225
250
275
300
325
350
375
400
425
450
475
500
550
600
0.51
1.02
1.53
2.04
2.55
3.06
3.57
4.08
4.59
5.10
5.61
6.12
7.14
8.16
9.18
10.20
11.23
12.25
13.27
14.29
15.31
17.86
0.32
0.64
0.97
1.29
1.62
1.94
2.27
2.59
2.92
3.24
3.57
3.89
4.54
5.19
5.84
6.49
7.14
7.79
8.44
9.09
9.74
11.36
12.98
14.61
16.23
17.85
19.48
0.79
1.59
2.38
3.18
3.97
4.77
5.57
6.36
7.16
7.95
8.75
9.55
11.14
12.73
14.32
15.91
17.50
19.10
0.22
0.78
1.65
2.82
4.26
5.97
7.95
10.18
12.66
15.38
18.35
21.56
28.69
36.74
45.69
55.54
66.26
77.84
0.07
0.27
0.56
0.96
1.45
2.03
2.70
3.45
4.30
5.22
6.23
7.32
9.74
12.47
15.51
18.86
22.50
26.43
30.65
35.16
39.95
53.15
0.02
0.09
0.19
0.32
0.48
0.67
0.90
1.15
1.43
1.74
2.07
2.43
3.24
4.15
5.16
6.27
7.48
8.79
10.19
11.69
13.29
17.68
22.64
28.15
34.22
40.83
47.97
▲
1 1/4"
1.660
1.414
0.123
0.20
0.40
0.61
0.81
1.02
1.22
1.42
1.63
1.83
2.04
2.24
2.44
2.85
3.26
3.67
4.08
4.48
4.89
5.30
5.71
6.12
7.14
8.16
9.18
10.20
11.22
12.24
13.26
14.28
15.30
16.32
17.34
18.36
19.38
1 1/2"
1.900
1.618
0.141
0.01
0.03
0.06
0.10
0.16
0.22
0.29
0.37
0.46
0.56
0.67
0.79
1.05
1.34
1.67
2.03
2.42
2.84
3.29
3.78
4.29
5.71
7.31
9.10
11.06
13.19
15.50
17.97
20.62
23.43
26.40
29.54
32.84
36.30
0.15
0.31
0.46
0.62
0.77
0.93
1.09
1.24
1.40
1.55
1.71
1.87
2.18
2.49
2.80
3.11
3.42
3.74
4.05
4.36
4.67
5.45
6.23
7.01
7.79
8.57
9.35
10.13
10.90
11.68
12.46
13.24
14.02
14.80
15.58
17.14
18.70
0.00
0.01
0.03
0.05
0.08
0.11
0.15
0.19
0.24
0.29
0.35
0.41
0.54
0.70
0.87
1.05
1.25
1.47
1.71
1.96
2.23
2.96
3.80
4.72
5.74
6.85
8.04
9.33
10.70
12.16
13.71
15.33
17.05
18.84
20.72
24.72
29.04
2"
2.375
2.023
0.176
0.19
0.29
0.39
0.49
0.59
0.69
0.79
0.89
0.99
1.09
1.19
1.39
1.59
1.79
1.99
2.19
2.39
2.59
2.79
2.99
3.48
3.98
4.48
4.98
5.48
5.98
6.48
6.97
7.47
7.97
8.47
8.97
9.47
9.96
10.96
11.96
12.96
13.95
14.95
15.95
16.94
17.94
18.94
19.93
0.00
0.01
0.02
0.03
0.04
0.05
0.06
0.08
0.10
0.12
0.14
0.18
0.23
0.29
0.35
0.42
0.50
0.58
0.66
0.75
1.00
1.28
1.59
1.94
2.31
2.71
3.15
3.61
4.10
4.62
5.17
5.75
6.35
6.99
8.34
9.79
11.36
13.03
14.81
16.69
18.67
20.75
22.94
25.23
2 1/2"
2.875
2.449
0.213
0.20
0.27
0.34
0.40
0.47
0.54
0.61
0.68
0.74
0.81
0.95
1.08
1.22
1.36
1.49
1.63
1.76
1.90
2.04
2.38
2.72
3.06
3.40
3.74
4.08
4.42
4.76
5.10
5.44
5.78
6.12
6.46
6.80
7.48
8.16
8.84
9.52
10.20
10.88
11.56
12.24
12.92
13.60
15.30
17.00
18.70
0.00
0.01
0.01
0.02
0.02
0.03
0.03
0.04
0.05
0.05
0.07
0.09
0.12
0.14
0.17
0.20
0.23
0.26
0.30
0.39
0.51
0.63
0.76
0.91
1.07
1.24
1.42
1.62
1.82
2.04
2.27
2.51
2.76
3.29
3.87
4.48
5.14
5.84
6.59
7.37
8.19
9.05
9.95
12.38
15.05
17.95
3"
3.500
2.982
0.259
0.22
0.27
0.32
0.36
0.41
0.45
0.50
0.55
0.64
0.73
0.82
0.91
1.00
1.10
1.19
1.28
1.37
1.60
1.83
2.06
2.29
2.52
2.75
2.98
3.21
3.44
3.67
3.89
4.12
4.35
4.58
5.04
5.50
5.96
6.42
6.88
7.34
7.79
8.25
8.71
9.17
10.32
11.47
12.61
13.76
14.91
16.05
17.20
18.35
19.49
0.00
0.01
0.01
0.01
0.01
0.01
0.02
0.02
0.03
0.04
0.04
0.05
0.06
0.08
0.09
0.10
0.11
0.15
0.19
0.24
0.29
0.35
0.41
0.48
0.55
0.62
0.70
0.78
0.87
0.96
1.06
1.26
1.48
1.72
1.97
2.24
2.53
2.83
3.14
3.47
3.82
4.75
5.77
6.89
8.09
9.39
10.77
12.23
13.79
15.42
4"
4.500
3.834
0.333
6"
6.625
5.643
0.491
0.27
0.30
0.33
0.38
0.44
0.49
0.55
0.61
0.66
0.72
0.77
0.83
0.97
1.11
1.24
1.38
1.52
1.66
1.80
1.94
2.08
2.22
2.35
2.49
2.63
2.77
3.05
3.33
3.60
3.88
4.16
4.44
4.71
4.99
5.27
5.55
6.24
6.93
7.63
8.32
9.02
9.71
10.40
11.10
11.79
12.49
13.18
13.87
15.26
16.65
0.35
0.38
0.44
0.51
0.57
0.64
0.70
0.76
0.83
0.89
0.96
1.02
1.08
1.15
1.21
1.28
1.40
1.53
1.66
1.79
1.92
2.04
2.17
2.30
2.43
2.56
2.88
3.20
3.52
3.84
4.16
4.48
4.80
5.12
5.44
5.76
6.08
6.40
7.04
7.68
0.00
0.01
0.01
0.01
0.01
0.01
0.02
0.02
0.02
0.03
0.03
0.03
0.04
0.06
0.07
0.09
0.10
0.12
0.14
0.16
0.18
0.21
0.23
0.26
0.28
0.31
0.37
0.44
0.51
0.58
0.66
0.74
0.83
0.93
1.02
1.12
1.40
1.70
2.03
2.38
2.76
3.17
3.60
4.06
4.54
5.05
5.58
6.14
7.32
8.60
Q
1.852
1.852 Qd4.866
c
[
296
Reference
( )
]
www.rainbird.com
2005 – 2006 Catalog
0.00
0.01
0.01
0.01
0.01
0.01
0.02
0.02
0.02
0.02
0.03
0.03
0.04
0.04
0.04
0.05
0.06
0.07
0.08
0.09
0.10
0.11
0.13
0.14
0.16
0.17
0.21
0.26
0.31
0.36
0.42
0.48
0.55
0.62
0.69
0.77
0.85
0.94
1.12
1.31
Reference
PVC Schedule 40 IPS Plastic Pipe
(1120, 1220) C=150
Size
1/2"
O.D.
0.840
I.D.
0.622
Wall Thk 0.109
3/4"
1.050
0.824
0.113
1"
1.315
1.049
0.133
1
2
3
4
5
6
7
8
9
10
11
12
14
16
18
20
22
24
26
28
30
35
40
45
50
55
60
65
70
75
80
85
90
95
100
110
120
130
140
150
160
170
180
190
200
225
250
275
300
325
350
375
400
425
450
475
500
550
600
0.60
1.20
1.80
2.40
3.00
3.60
4.20
4.80
5.40
6.00
6.60
7.21
8.41
9.61
10.81
12.01
13.21
14.42
15.62
16.82
18.02
0.37
0.74
1.11
1.48
1.85
2.22
2.59
2.96
3.33
3.70
4.07
4.44
5.19
5.93
6.67
7.41
8.15
8.89
9.64
10.38
11.12
12.97
14.83
16.68
18.53
1.05
2.11
3.16
4.22
5.27
6.33
7.38
8.44
9.49
10.55
11.60
12.65
14.76
16.87
18.98
21.09
0.43
1.55
3.28
5.60
8.46
11.86
15.77
20.20
25.12
30.54
36.43
42.80
56.94
72.92
90.69
110.23
0.11
0.39
0.84
1.42
2.15
3.02
4.01
5.14
6.39
7.77
9.27
10.89
14.48
18.55
23.07
28.04
33.45
39.30
45.58
52.28
59.41
0.03
0.12
0.26
0.44
0.66
0.93
1.24
1.59
1.97
2.40
2.86
3.36
4.47
5.73
7.13
8.66
10.33
12.14
14.08
16.15
18.35
24.42
31.27
38.89
47.27
▲
1 1/4"
1.660
1.380
0.140
0.21
0.42
0.64
0.85
1.07
1.28
1.49
1.71
1.92
2.14
2.35
2.57
2.99
3.42
3.85
4.28
4.71
5.14
5.57
5.99
6.42
7.49
8.56
9.64
10.71
11.78
12.85
13.92
14.99
16.06
17.13
18.21
19.28
1 1/2"
1.900
1.610
0.145
0.01
0.03
0.07
0.12
0.18
0.25
0.33
0.42
0.52
0.63
0.75
0.89
1.18
1.51
1.88
2.28
2.72
3.20
3.17
4.25
4.83
6.43
8.23
10.24
12.45
14.85
17.45
20.23
23.21
26.37
29.72
33.26
36.97
0.15
0.31
0.47
0.62
0.78
0.94
1.10
1.25
1.41
1.57
1.73
1.88
2.20
2.51
2.83
3.14
3.46
3.77
4.09
4.40
4.72
5.50
6.29
7.08
7.87
8.65
9.44
10.23
11.01
11.80
12.59
13.37
14.16
14.95
15.74
17.31
18.88
0.00
0.02
0.03
0.05
0.08
0.12
0.15
0.20
0.25
0.30
0.36
0.42
0.56
0.71
0.89
1.08
1.29
1.51
1.75
2.01
2.28
3.04
3.89
4.84
5.88
7.01
8.24
9.56
10.96
12.46
14.04
15.71
17.46
19.30
21.22
25.32
29.75
2"
2.375
2.067
0.154
0.19
0.28
0.38
0.47
0.57
0.66
0.76
0.85
0.95
1.05
1.14
1.33
1.52
1.71
1.90
2.10
2.29
2.48
2.67
2.86
3.34
3.81
4.29
4.77
5.25
5.72
6.20
6.68
7.16
7.63
8.11
8.59
9.07
9.54
10.50
11.45
12.41
13.36
14.32
15.27
16.23
17.18
18.14
19.09
0.00
0.01
0.02
0.02
0.03
0.05
0.06
0.07
0.09
0.11
0.12
0.17
0.21
0.26
0.32
0.38
0.45
0.52
0.60
0.68
0.90
1.15
1.43
1.74
2.08
2.44
2.83
3.25
3.69
4.16
4.66
5.18
5.72
6.29
7.51
8.82
10.23
11.74
13.33
15.03
16.81
18.69
20.66
22.72
2 1/2"
2.875
2.469
0.203
0.20
0.26
0.33
0.40
0.46
0.53
0.60
0.66
0.73
0.80
0.93
1.07
1.20
1.33
1.47
1.60
1.74
1.87
2.00
2.34
2.67
3.01
3.34
3.68
4.01
4.35
4.68
5.01
5.35
5.68
6.02
6.35
6.69
7.36
8.03
8.70
9.37
10.03
10.70
11.37
12.04
12.71
13.38
15.05
16.73
18.40
0.00
0.01
0.01
0.01
0.02
0.02
0.03
0.04
0.04
0.05
0.07
0.09
0.11
0.13
0.16
0.19
0.22
0.25
0.29
0.38
0.49
0.60
0.73
0.88
1.03
1.19
1.37
1.56
1.75
1.96
2.18
2.41
2.65
3.16
3.72
4.31
4.94
5.62
6.33
7.08
7.87
8.70
9.57
11.90
14.47
17.26
3"
3.500
3.068
0.216
0.21
0.26
0.30
0.34
0.39
0.43
0.47
0.52
0.60
0.69
0.78
0.86
0.95
1.04
1.12
1.21
1.30
1.51
1.73
1.95
2.16
2.38
2.60
2.81
3.03
3.25
3.46
3.68
3.90
4.11
4.33
4.76
5.20
5.63
6.06
6.50
6.93
7.36
7.80
8.23
8.66
9.75
10.83
11.92
13.00
14.08
15.17
16.25
17.33
18.42
19.50
0.00
0.01
0.01
0.01
0.01
0.01
0.02
0.02
0.02
0.03
0.04
0.05
0.06
0.07
0.08
0.09
0.10
0.13
0.17
0.21
0.26
0.30
0.36
0.41
0.48
0.54
0.61
0.68
0.76
0.84
0.92
1.10
1.29
1.50
1.72
1.95
2.20
2.46
2.74
3.02
3.33
4.14
5.03
6.00
7.05
8.17
9.38
10.65
12.01
13.43
14.93
4"
4.500
4.026
0.237
6"
6.625
6.065
0.280
0.30
0.35
0.40
0.45
0.50
0.55
0.60
0.65
0.70
0.75
0.88
1.00
1.13
1.25
1.38
1.51
1.63
1.76
1.88
2.01
2.13
2.26
2.39
2.51
2.76
3.02
3.27
3.52
3.77
4.02
4.27
4.53
4.78
5.03
5.66
6.29
6.92
7.55
8.18
8.81
9.43
10.06
10.69
11.32
11.95
12.58
13.84
15.10
0.38
0.44
0.49
0.55
0.61
0.66
0.72
0.77
0.83
0.88
0.94
0.99
1.05
1.10
1.22
1.33
1.44
1.55
1.66
1.77
1.88
1.99
2.10
2.21
2.49
2.77
3.05
3.32
3.60
3.88
4.15
4.43
4.71
4.99
5.26
5.54
6.10
6.65
0.00
0.01
0.01
0.01
0.01
0.01
0.02
0.02
0.02
0.03
0.04
0.04
0.06
0.07
0.08
0.10
0.11
0.13
0.14
0.16
0.18
0.20
0.22
0.25
0.29
0.34
0.40
0.46
0.52
0.59
0.66
0.73
0.81
0.89
1.10
1.34
1.60
1.88
2.18
2.50
2.84
3.20
3.58
3.98
4.40
4.84
5.77
6.78
0.00
0.01
0.01
0.01
0.01
0.01
0.02
0.02
0.02
0.02
0.02
0.03
0.03
0.03
0.04
0.05
0.05
0.06
0.07
0.08
0.09
0.10
0.11
0.12
0.15
0.18
0.22
0.26
0.30
0.34
0.39
0.44
0.49
0.54
0.60
0.66
0.79
0.92
Q
1.852
1.852 Qd4.866
c
[
2005 – 2006 Catalog
( )
]
www.rainbird.com
Reference
297
Reference
PVC Schedule 80 IPS Plastic Pipe
(1120, 1220) C=150
Size
1/2"
O.D.
0.840
I.D.
0.546
Wall Thk 0.147
3/4"
1.050
0.742
0.154
1"
1.315
0.957
0.179
1
2
3
4
5
6
7
8
9
10
11
12
14
16
18
20
22
24
26
28
30
35
40
45
50
55
60
65
70
75
80
85
90
95
100
110
120
130
140
150
160
170
180
190
200
225
250
275
300
325
350
375
400
425
450
475
500
550
600
0.74
1.48
2.22
2.96
3.70
4.44
5.18
5.92
6.66
7.41
8.15
8.89
10.37
11.85
13.33
14.82
16.30
17.78
19.26
0.44
0.89
1.33
1.78
2.22
2.67
3.11
3.56
4.00
4.45
4.90
5.34
6.23
7.12
8.01
8.90
9.80
10.69
11.58
12.47
13.36
15.59
17.81
1.36
2.73
4.10
5.47
6.84
8.21
9.58
10.94
12.31
13.68
15.05
16.42
0.81
2.92
6.19
10.54
15.93
22.33
29.71
38.05
47.33
57.52
68.63
80.63
0.18
0.66
1.39
2.37
3.58
5.02
6.68
8.56
10.64
12.93
15.43
18.13
24.12
30.88
38.41
46.69
55.70
65.44
75.90
0.05
0.19
0.40
0.69
1.04
1.46
1.94
2.48
3.09
3.75
4.47
5.26
6.99
8.95
11.14
13.54
16.15
18.97
22.01
25.24
28.69
38.16
48.87
▲
1 1/4"
1.660
1.278
0.191
0.24
0.49
0.74
0.99
1.24
1.49
1.74
1.99
2.24
2.49
2.74
2.99
3.49
3.99
4.49
4.99
5.49
5.99
6.49
6.99
7.49
8.74
9.99
11.24
12.49
13.73
14.98
16.23
17.48
18.73
19.98
0.01
0.05
0.10
0.17
0.25
0.36
0.47
0.61
0.76
0.92
1.10
1.29
1.71
2.19
2.73
3.31
3.95
4.64
5.39
6.18
7.02
9.34
11.96
14.88
18.09
21.58
25.35
29.40
33.72
38.32
43.19
1 1/2"
1.900
1.500
0.200
2"
2.375
1.939
0.218
0.18
0.36
0.54
0.72
0.90
1.08
1.26
1.45
1.63
1.81
1.99
2.17
2.53
2.90
3.26
3.62
3.98
4.35
4.71
5.07
5.43
6.34
7.25
8.16
9.06
9.97
10.87
11.78
12.69
13.59
14.50
15.41
16.32
17.22
18.13
19.94
0.10
0.21
0.32
0.43
0.54
0.65
0.75
0.86
0.97
1.08
1.19
1.30
1.51
1.73
1.95
2.17
2.38
2.60
2.82
3.03
3.25
3.79
4.34
4.88
5.42
5.96
6.51
7.05
7.59
8.13
8.68
9.22
9.76
10.30
10.85
11.93
13.02
14.10
15.19
16.27
17.36
18.44
19.53
0.01
0.02
0.05
0.08
0.12
0.16
0.22
0.28
0.35
0.42
0.50
0.59
0.79
1.01
1.26
1.52
1.81
2.13
2.47
2.83
3.22
4.29
5.49
6.83
8.30
9.90
11.63
13.49
15.47
17.58
19.81
22.16
24.64
27.23
29.95
35.73
0.00
0.01
0.01
0.02
0.03
0.05
0.06
0.08
0.10
0.12
0.14
0.17
0.23
0.29
0.36
0.44
0.52
0.61
0.71
0.81
0.92
1.23
1.57
1.96
2.38
2.84
3.33
3.87
4.44
5.04
5.68
6.36
7.07
7.81
8.59
10.25
12.04
13.96
16.02
18.20
20.51
22.95
25.51
2 1/2"
2.875
2.323
0.276
0.15
0.22
0.30
0.37
0.45
0.52
0.60
0.68
0.75
0.83
0.90
1.05
1.20
1.36
1.51
1.66
1.81
1.96
2.11
2.26
2.64
3.02
3.40
3.78
4.15
4.53
4.91
5.29
5.67
6.04
6.42
6.80
7.18
7.56
8.31
9.07
9.82
10.58
11.34
12.09
12.85
13.60
14.36
15.12
17.01
18.90
0.00
0.01
0.01
0.01
0.02
0.03
0.03
0.04
0.05
0.06
0.07
0.09
0.12
0.15
0.18
0.22
0.25
0.29
0.34
0.38
0.51
0.65
0.81
0.99
1.18
1.38
1.61
1.84
2.09
2.36
2.63
2.93
3.24
3.57
4.25
5.00
5.60
6.65
7.56
8.51
9.53
10.59
11.71
12.87
16.01
19.46
3"
3.500
2.900
0.300
0.24
0.29
0.33
0.38
0.43
0.48
0.53
0.58
0.67
0.77
0.87
0.97
1.06
1.16
1.26
1.35
1.45
1.69
1.94
2.18
2.42
2.66
2.91
3.15
3.39
3.63
3.88
4.12
4.36
4.60
4.85
5.33
5.82
6.30
6.79
7.27
7.76
8.24
8.73
9.21
9.70
10.91
12.12
13.34
14.55
15.76
16.97
18.19
19.40
0.00
0.01
0.01
0.01
0.01
0.02
0.02
0.02
0.03
0.04
0.05
0.06
0.07
0.09
0.10
0.11
0.13
0.17
0.22
0.28
0.34
0.40
0.47
0.55
0.63
0.71
0.80
0.90
1.00
1.10
1.21
1.45
1.70
1.97
2.27
2.57
2.89
3.24
3.60
3.98
4.37
5.44
6.61
7.89
9.27
10.75
12.33
14.01
15.79
4"
4.500
3.826
0.337
6"
6.625
5.761
0.432
0.27
0.30
0.33
0.39
0.44
0.50
0.55
0.61
0.66
0.72
0.78
0.83
0.97
1.11
1.25
1.39
1.53
1.67
1.81
1.95
2.09
2.22
2.36
2.50
2.64
2.78
3.06
3.34
3.62
3.90
4.18
4.45
4.73
5.01
5.29
5.57
6.27
6.96
7.66
8.36
9.05
9.75
10.45
11.14
11.84
12.54
13.23
13.93
15.32
16.72
0.36
0.43
0.49
0.55
0.61
0.67
0.73
0.79
0.86
0.92
0.98
1.04
1.10
1.16
1.22
1.35
1.47
1.59
1.72
1.84
1.96
2.08
2.21
2.33
2.45
2.76
3.07
3.38
3.68
3.99
4.30
4.60
4.91
5.22
5.53
5.83
6.14
6.76
7.37
0.00
0.01
0.01
0.01
0.01
0.01
0.02
0.02
0.02
0.03
0.03
0.03
0.05
0.06
0.07
0.09
0.10
0.12
0.14
0.16
0.18
0.21
0.23
0.26
0.29
0.31
0.38
0.44
0.51
0.59
0.67
0.75
0.84
0.93
1.03
1.14
1.41
1.72
2.05
2.41
2.79
3.20
3.64
4.10
4.59
5.10
5.64
6.20
7.40
8.69
Q
1.852
1.852 Qd4.866
c
[
298
Reference
( )
]
www.rainbird.com
2005 – 2006 Catalog
0.00
0.01
0.01
0.01
0.01
0.01
0.02
0.02
0.02
0.03
0.03
0.03
0.04
0.04
0.04
0.05
0.06
0.07
0.08
0.09
0.10
0.11
0.13
0.14
0.16
0.19
0.23
0.28
0.33
0.38
0.44
0.50
0.56
0.63
0.70
0.77
0.85
1.01
1.19
Reference
Polyethylene (PE) SDR Pressure Rated Tube
(2306, 3206, 3306) SDR 7, 9, 11.5, 15 C=150
Size
1/2"
I.D.
0.622
3/4"
0.824
1"
1.049
1
2
3
4
5
6
7
8
9
10
11
12
14
16
18
20
22
24
26
28
30
35
40
45
50
55
60
65
70
75
80
85
90
95
100
110
120
130
140
150
160
170
180
190
200
225
250
275
300
325
350
375
400
425
450
475
500
550
600
0.60
1.20
1.80
2.40
3.00
3.60
4.20
4.80
5.40
6.00
6.00
7.21
8.41
9.61
10.81
12.01
13.21
14.42
15.62
16.82
18.02
0.37
0.74
1.11
1.48
1.85
2.22
2.59
2.96
3.33
3.70
4.07
4.44
5.19
5.93
6.67
7.41
8.15
8.89
9.64
10.38
11.12
12.97
14.83
16.68
18.53
1.05
2.10
3.16
4.21
5.27
6.32
7.38
8.43
9.49
10.54
11.60
12.65
14.76
16.87
18.98
0.49
1.76
3.73
6.35
9.60
13.46
17.91
22.93
28.52
34.67
41.36
48.60
64.65
82.79
102.97
0.12
0.45
0.95
1.62
2.44
3.43
4.56
5.84
7.26
8.82
10.53
12.37
16.46
21.07
26.21
31.86
38.01
44.65
48.15
59.41
67.50
0.04
0.14
0.29
0.50
0.76
1.06
1.41
1.80
2.24
2.73
3.25
3.82
5.08
6.51
8.10
9.84
11.74
13.79
16.00
18.35
20.85
27.74
35.53
44.19
53.71
▲
1 1/4"
1.380
0.21
0.42
0.64
0.85
1.07
1.28
1.49
1.71
1.92
2.14
2.35
2.57
2.99
3.42
3.85
4.28
4.71
5.14
5.57
5.99
6.42
7.49
8.56
9.64
10.71
11.78
12.85
13.92
14.99
16.06
17.13
18.21
19.28
0.01
0.04
0.08
0.13
0.20
0.28
0.37
0.47
0.59
0.72
0.86
1.01
1.34
1.71
2.13
2.59
3.09
3.63
4.21
4.83
5.49
7.31
9.36
11.64
14.14
16.87
19.82
22.99
26.37
29.97
33.77
37.79
42.01
1 1/2"
1.610
2"
2.067
0.15
0.31
0.47
0.62
0.78
0.94
1.10
1.25
1.41
1.57
1.73
1.88
2.20
2.51
2.83
3.14
3.46
3.77
4.09
4.40
4.72
5.50
6.29
7.08
7.87
8.65
9.44
10.23
11.01
11.80
12.59
13.37
14.16
14.95
15.74
17.31
18.88
0.09
0.19
0.28
0.38
0.47
0.57
0.66
0.76
0.85
0.95
1.05
1.14
1.33
1.52
1.71
1.90
2.10
2.29
2.48
2.67
2.86
3.34
3.81
4.29
4.77
5.25
5.72
6.20
6.68
7.16
7.63
8.11
8.59
9.07
9.54
10.50
11.45
12.41
13.36
14.32
15.27
16.23
17.18
18.14
19.09
0.00
0.02
0.04
0.06
0.09
0.13
0.18
0.22
0.28
0.34
0.40
0.48
0.63
0.81
1.01
1.22
1.46
1.72
1.99
2.28
2.59
3.45
4.42
5.50
6.68
7.97
9.36
10.86
12.46
14.16
15.95
17.85
19.84
21.93
24.12
28.77
33.80
0.00
0.01
0.01
0.02
0.03
0.04
0.05
0.07
0.08
0.10
0.12
0.14
0.19
0.24
0.30
0.36
0.43
0.51
0.59
0.68
0.77
1.02
1.31
1.63
1.98
2.36
2.78
3.22
3.69
4.20
4.73
5.29
5.88
6.50
7.15
8.53
10.02
11.62
13.33
15.15
17.08
19.11
21.24
23.48
25.81
2 1/2"
2.469
0.20
0.26
0.33
0.40
0.46
0.53
0.60
0.66
0.73
0.80
0.93
1.07
1.20
1.33
1.47
1.60
1.74
1.87
2.00
2.34
2.67
3.01
3.34
3.68
4.01
4.35
4.68
5.01
5.35
5.68
6.02
6.35
6.69
7.36
8.03
8.70
9.37
10.03
10.70
11.37
12.04
12.71
13.38
15.05
16.73
18.40
0.00
0.01
0.01
0.02
0.02
0.03
0.03
0.04
0.05
0.06
0.08
0.10
0.13
0.15
0.18
0.21
0.25
0.29
0.32
0.43
0.55
0.69
0.83
1.00
1.17
1.36
1.56
1.77
1.99
2.23
2.48
2.74
3.01
3.59
4.22
4.90
5.62
6.38
7.19
8.05
8.95
9.89
10.87
13.52
16.44
19.61
3"
3.068
0.21
0.26
0.30
0.34
0.39
0.43
0.47
0.52
0.60
0.69
0.78
0.86
0.95
1.04
1.12
1.21
1.30
1.51
1.73
1.95
2.16
2.38
2.60
2.81
3.03
3.25
3.46
3.68
3.90
4.11
4.33
4.76
5.20
5.63
6.06
6.50
6.93
7.36
7.80
8.23
8.66
9.75
10.83
11.92
13.00
14.08
15.17
16.25
17.33
18.42
19.50
0.00
0.01
0.01
0.01
0.01
0.01
0.02
0.02
0.03
0.04
0.04
0.05
0.06
0.07
0.09
0.10
0.11
0.15
0.19
0.24
0.29
0.35
0.41
0.47
0.54
0.61
0.69
0.77
0.86
0.95
1.05
1.25
1.47
1.70
1.95
2.22
2.50
2.80
3.11
3.44
3.78
4.70
5.71
6.82
8.01
9.29
10.65
12.10
13.64
15.26
16.97
4"
4.026
6"
6.065
0.27
0.30
0.35
0.40
0.45
0.50
0.55
0.60
0.65
0.70
0.75
0.88
1.00
1.13
1.25
1.38
1.51
1.63
1.76
1.88
2.01
2.13
2.26
2.39
2.51
2.76
3.02
3.27
3.52
3.77
4.02
4.27
4.53
4.78
5.03
5.66
6.29
6.92
7.55
8.18
8.81
9.43
10.06
10.69
11.32
11.95
12.58
13.84
15.10
0.33
0.38
0.44
0.49
0.55
0.61
0.66
0.72
0.77
0.83
0.88
0.94
0.99
1.05
1.10
1.22
1.33
1.44
1.55
1.66
1.77
1.88
1.99
2.10
2.21
2.49
2.77
3.05
3.32
3.60
3.88
4.15
4.43
4.71
4.99
5.26
5.54
6.10
6.65
0.00
0.01
0.01
0.01
0.01
0.01
0.02
0.02
0.02
0.03
0.03
0.04
0.05
0.06
0.08
0.09
0.11
0.13
0.14
0.16
0.18
0.21
0.23
0.25
0.28
0.33
0.39
0.45
0.52
0.59
0.67
0.75
0.83
0.92
1.01
1.25
1.52
1.82
2.13
2.48
2.84
3.23
3.64
4.07
4.52
5.00
5.50
6.56
7.70
0.00
0.01
0.01
0.01
0.01
0.01
0.01
0.02
0.02
0.02
0.03
0.03
0.03
0.03
0.04
0.05
0.05
0.06
0.07
0.08
0.09
0.10
0.11
0.12
0.14
0.17
0.21
0.25
0.29
0.34
0.39
0.44
0.50
0.55
0.62
0.68
0.75
0.89
1.05
Q
1.852
1.852 Qd4.866
c
[
2005 – 2006 Catalog
( )
]
www.rainbird.com
Reference
299
Reference
Schedule 40 Standard Steel Pipe
(
Size
1/2"
O.D.
0.840
I.D.
0.622
Wall Thk 0.109
3/4"
1.050
0.824
0.113
1"
1.315
1.049
0.133
1
2
3
4
5
6
7
8
9
10
11
12
14
16
18
20
22
24
26
28
30
35
40
45
50
55
60
65
70
75
80
85
90
95
100
110
120
130
140
150
160
170
180
190
200
225
250
275
300
325
350
375
400
425
450
475
500
550
600
0.60
1.20
1.80
2.40
3.00
3.60
4.20
4.80
5.40
6.00
6.60
7.21
8.41
9.61
10.81
12.01
13.21
14.42
15.62
16.82
18.02
0.37
0.74
1.11
1.48
1.85
2.22
2.59
2.96
3.33
3.70
4.07
4.44
5.19
5.93
6.67
7.41
8.15
8.89
9.64
10.38
11.12
12.97
14.83
16.68
18.53
1.05
2.10
3.16
4.21
5.27
6.32
7.38
8.43
9.49
10.54
11.60
12.65
14.76
16.87
18.98
0.91
3.28
6.95
11.85
17.91
25.10
33.40
42.77
53.19
64.65
77.13
90.62
20.56
54.39
92.02
0.23
0.84
1.77
3.02
4.56
6.39
8.50
10.89
13.54
16.46
19.63
23.07
30.69
39.30
48.88
59.41
70.88
83.27
96.57
110.8
125.9
0.07
0.26
0.55
0.93
1.41
1.97
2.63
3.36
4.18
5.08
6.07
7.13
9.48
12.14
15.10
18.35
21.90
25.72
29.83
34.22
38.89
51.74
66.25
82.40
100.2
▲
1 1/4"
1.660
1.380
0.140
0.21
0.42
0.64
0.85
1.07
1.28
1.49
1.71
1.92
2.14
2.35
2.57
2.99
3.42
3.85
4.28
4.71
5.14
5.57
5.99
6.42
7.49
8.56
9.64
10.71
11.78
12.85
13.92
14.99
16.06
17.13
18.21
19.28
0.02
0.07
0.14
0.25
0.37
0.52
0.69
0.89
1.10
1.34
1.60
1.88
2.50
3.20
3.98
4.83
5.77
6.77
7.86
9.01
10.24
13.62
17.45
21.70
26.37
31.47
36.97
42.88
49.18
55.89
62.98
70.47
78.33
1 1/2"
1.900
1.610
0.145
2"
2.375
2.067
0.154
0.15
0.31
0.47
0.62
0.78
0.94
1.10
1.25
1.41
1.57
1.73
1.88
2.20
2.51
2.83
3.14
3.46
3.77
4.09
4.40
4.72
5.50
6.29
7.08
7.87
8.65
9.44
10.23
11.01
11.80
12.59
13.37
14.16
14.95
15.74
17.31
18.88
0.09
0.19
0.28
0.38
0.47
0.57
0.66
0.76
0.85
0.95
1.05
1.14
1.33
1.52
1.71
1.90
2.10
2.29
2.48
2.67
2.86
3.34
3.81
4.29
4.77
5.25
5.72
6.20
6.68
7.16
7.63
8.11
8.59
9.07
9.54
10.50
11.45
12.41
13.36
14.32
15.27
16.23
17.18
18.14
19.09
0.01
0.03
0.07
0.12
0.18
0.25
0.33
0.42
0.52
0.63
0.75
0.89
1.18
1.51
1.88
2.28
2.72
3.20
3.71
4.26
4.84
6.44
8.24
10.25
12.46
14.86
17.46
20.25
23.23
26.40
29.75
33.29
37.00
40.90
44.97
53.66
63.04
0.00
0.01
0.02
0.03
0.05
0.07
0.10
0.12
0.15
0.19
0.22
0.26
0.35
0.45
0.56
0.68
0.81
0.95
1.10
1.26
1.43
1.91
2.44
3.04
3.69
4.41
5.18
6.00
6.89
7.83
8.82
9.87
10.97
12.13
13.33
15.91
18.69
21.68
24.87
28.26
31.84
35.63
39.61
43.78
48.14
2 1/2"
2.875
2.469
0.203
0.13
0.20
0.26
0.33
0.40
0.46
0.53
0.60
0.66
0.73
0.80
0.93
1.07
1.20
1.33
1.47
1.60
1.74
1.87
2.00
2.34
2.67
3.01
3.34
3.68
4.01
4.35
4.68
5.01
5.35
5.68
6.02
6.35
6.69
7.36
8.03
8.70
9.37
10.03
10.70
11.37
12.04
12.71
13.38
15.05
16.73
18.40
0.00
0.01
0.01
0.02
0.03
0.04
0.05
0.06
0.08
0.09
0.11
0.15
0.19
0.23
0.29
0.34
0.40
0.46
0.53
0.60
0.80
1.03
1.28
1.56
1.86
2.18
2.53
2.90
3.30
3.72
4.16
4.62
5.11
5.62
6.70
7.87
9.13
10.47
11.90
13.41
15.01
16.68
18.44
20.28
25.22
30.65
36.57
3"
3.500
3.068
0.216
0.13
0.17
0.21
0.26
0.30
0.34
0.39
0.43
0.47
0.52
0.60
0.69
0.78
0.86
0.95
1.04
1.12
1.21
1.30
1.51
1.73
1.95
2.16
2.38
2.60
2.81
3.03
3.25
3.46
3.68
3.90
4.11
4.33
4.76
5.20
5.63
6.06
6.50
6.93
7.36
7.80
8.23
8.66
9.75
10.83
11.92
13.00
14.08
15.17
16.25
17.33
18.42
19.50
0.00
0.01
0.01
0.01
0.01
0.02
0.02
0.03
0.03
0.04
0.05
0.07
0.08
0.10
0.12
0.14
0.16
0.18
0.21
0.28
0.36
0.44
0.54
0.65
0.76
0.88
1.01
1.15
1.29
1.44
1.61
1.78
1.95
2.33
2.74
3.17
3.64
4.14
4.66
5.22
5.80
6.41
7.05
8.76
10.55
12.71
14.93
17.32
19.87
22.57
25.44
28.46
31.64
4"
4.500
4.026
0.237
6"
6.625
6.065
0.280
0.20
0.22
0.25
0.27
0.30
0.35
0.40
0.45
0.50
0.55
0.60
0.65
0.70
0.75
0.88
1.00
1.13
1.25
1.38
1.51
1.63
1.76
1.88
2.01
2.13
2.26
2.39
2.51
2.76
3.02
3.27
3.52
3.77
4.02
4.27
4.53
4.78
5.03
5.66
6.29
6.92
7.55
8.18
8.81
9.43
10.06
10.69
11.32
11.95
12.58
13.84
15.10
0.24
0.26
0.28
0.31
0.33
0.38
0.44
0.49
0.55
0.61
0.66
0.72
0.77
0.83
0.88
0.94
0.99
1.05
1.10
1.22
1.33
1.44
1.55
1.66
1.77
1.88
1.99
2.10
2.21
2.49
2.77
3.05
3.32
3.60
3.88
4.15
4.43
4.71
4.99
5.26
5.54
6.10
6.65
0.00
0.01
0.01
0.01
0.01
0.01
0.02
0.02
0.03
0.03
0.04
0.04
0.05
0.06
0.07
0.10
0.12
0.14
0.17
0.20
0.23
0.27
0.31
0.34
0.39
0.43
0.47
0.52
0.62
0.73
0.85
0.97
1.10
1.24
1.39
1.55
1.71
1.88
2.34
2.84
3.39
3.98
4.62
5.30
6.02
6.78
7.59
8.43
9.32
10.25
12.23
14.37
Q
1.852 Q 1.852 x.433 for psi loss per 100' of pipe
c
[
300
Reference
( )
d4.866
]
www.rainbird.com
2005 – 2006 Catalog
0.00
0.01
0.01
0.01
0.01
0.01
0.01
0.02
0.02
0.02
0.03
0.03
0.04
0.04
0.05
0.05
0.06
0.06
0.07
0.08
0.10
0.12
0.13
0.15
0.17
0.19
0.21
0.23
0.26
0.32
0.39
0.46
0.54
0.63
0.72
0.82
0.92
1.03
1.15
1.27
1.40
1.67
1.96
Reference
Type K Copper Water Tube
C=140
psi Loss Per 100 Feet of Tube (psi/100 ft.)
Size
O.D.
I.D.
Wall Thk
Flow GPM Velocity fps
1/2"
0.625
0.5270
0.049
psi Loss
5/8"
0.750
0.652
0.049
1
2
3
4
5
6
7
8
9
10
11
12
14
16
18
20
22
24
26
28
30
35
40
45
50
55
60
65
70
75
80
85
90
95
100
110
120
130
140
150
160
170
180
190
200
225
250
275
300
325
350
375
400
425
450
475
500
550
1.09
3.94
8.35
14.23
21.51
30.15
40.11
51.37
63.89
77.66
92.65
108.85
0.95
1.91
2.87
3.83
4.79
5.75
6.71
7.67
8.63
9.59
10.55
11.51
13.43
15.35
17.27
19.19
1.46
2.93
4.40
5.87
7.34
8.81
10.28
11.75
13.22
14.69
16.15
17.62
0.39
1.40
2.97
5.05
7.64
10.70
14.24
18.24
22.68
27.57
32.89
38.64
51.41
65.83
81.88
99.53
▲
3/4"
0.875
0.745
0.065
0.73
1.47
2.20
2.94
3.67
4.41
5.14
5.88
6.61
7.35
8.08
8.82
10.29
11.76
13.23
14.70
16.17
17.64
19.11
0.20
0.73
1.55
2.64
3.99
5.60
7.44
9.53
11.86
14.41
17.19
20.20
26.87
34.41
42.80
52.02
62.06
72.92
84.57
1"
1.125
0.995
0.065
1 1/4"
1.375
1.245
0.065
1 1/2"
1.625
1.481
0.072
2"
2.125
1.959
0.083
0.41
0.82
1.23
1.64
2.06
2.47
2.88
3.29
3.70
4.12
4.53
4.94
5.76
6.59
7.41
8.24
9.06
9.89
10.71
11.53
12.36
14.42
16.48
18.54
0.26
0.52
0.78
1.05
1.31
1.57
1.84
2.10
2.36
2.63
2.89
3.15
3.68
4.21
4.73
5.26
5.79
6.31
6.84
7.37
7.89
9.21
10.52
11.84
13.16
14.47
15.79
17.10
18.42
19.74
0.18
0.37
0.55
0.74
0.93
1.11
1.30
1.48
1.67
1.86
2.04
2.23
2.60
2.97
3.34
3.72
4.09
4.46
4.83
5.20
5.58
6.51
7.44
8.37
9.30
10.23
11.16
12.09
13.02
13.95
14.88
15.81
16.74
17.67
18.60
0.10
0.21
0.31
0.42
0.53
0.63
0.74
0.85
0.95
1.06
1.16
1.27
1.48
1.70
1.91
2.11
2.33
2.55
2.76
2.97
3.18
3.72
4.25
4.78
5.31
5.84
6.37
6.91
7.44
7.97
8.50
9.03
9.56
10.09
10.63
11.69
12.75
13.82
14.88
15.94
17.01
18.07
19.13
0.05
0.18
0.38
0.65
0.98
1.37
1.82
2.33
2.90
3.53
4.21
4.94
6.57
8.42
10.47
12.73
15.18
17.84
20.69
23.73
26.97
35.88
45.95
57.15
0.02
0.06
0.13
0.22
0.33
0.46
0.61
0.78
0.97
1.18
1.41
1.66
2.21
2.83
3.52
4.28
5.10
5.99
6.95
7.98
9.06
12.06
15.44
19.20
23.34
27.85
32.71
37.94
43.52
49.46
0.01
0.03
0.05
0.09
0.14
0.20
0.26
0.34
0.42
0.51
0.61
0.71
0.95
1.22
1.51
1.84
2.19
2.58
2.99
3.43
3.89
5.18
6.63
8.25
10.03
11.97
14.06
16.31
18.70
21.25
23.95
26.80
29.79
32.93
36.21
0.00
0.01
0.01
0.02
0.04
0.05
0.07
0.09
0.11
0.13
0.16
0.18
0.24
0.31
0.39
0.47
0.56
0.66
0.77
0.88
1.00
1.33
1.70
2.12
2.57
3.07
3.60
4.18
4.80
5.45
6.14
6.87
7.64
8.44
9.28
11.08
13.01
15.09
17.31
19.67
22.17
24.81
27.58
2 1/2"
2.625
2.435
0.095
0.20
0.27
0.34
0.41
0.48
0.55
0.61
0.68
0.75
0.82
0.95
1.10
1.23
1.37
1.51
1.65
1.78
1.92
2.06
2.40
2.75
3.00
3.44
3.78
4.12
4.47
4.81
5.16
5.50
5.84
6.19
6.53
6.88
7.56
8.25
8.94
9.63
10.32
11.00
11.69
12.38
13.07
13.76
15.48
17.20
18.92
0.00
0.01
0.01
0.02
0.02
0.03
0.04
0.05
0.05
0.06
0.08
0.11
0.13
0.16
0.20
0.23
0.27
0.30
0.35
0.46
0.59
0.73
0.89
1.06
1.25
1.45
1.66
1.89
2.13
2.38
2.65
2.93
3.22
3.84
4.52
5.24
6.01
6.83
7.69
8.61
9.57
10.58
11.63
14.47
17.58
20.98
3"
3.125
2.907
0.109
0.19
0.24
0.28
0.33
0.38
0.43
0.48
0.53
0.57
0.67
0.77
0.86
0.96
1.06
1.15
1.25
1.35
1.44
1.68
1.93
2.17
2.41
2.65
2.89
3.13
3.37
3.62
3.86
4.10
4.34
4.58
4.82
5.31
5.79
6.27
6.75
7.24
7.72
8.20
8.69
9.17
9.65
10.86
12.07
13.27
14.48
15.69
16.89
18.10
19.31
0.00
0.01
0.01
0.01
0.01
0.02
0.02
0.02
0.03
0.04
0.05
0.06
0.07
0.08
0.10
0.11
0.13
0.15
0.19
0.25
0.31
0.38
0.45
0.53
0.61
0.70
0.80
0.90
1.01
1.12
1.24
1.36
1.62
1.91
2.21
2.54
2.88
3.25
3.64
4.04
4.47
4.91
6.11
7.43
8.86
10.41
12.07
13.85
15.73
17.73
Q
1.852
1.852 Qd4.866
c
[
2005 – 2006 Catalog
( )
]
www.rainbird.com
Reference
301
Reference
AWWA Standard
Pressure Loss Through Water Meters
Pressure Loss: psi
Nominal Size
▲
Flow
GPM
5/8"
3/4"
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
22
24
26
28
30
32
34
36
38
40
42
44
46
48
50
52
54
56
58
60
65
70
75
80
90
100
110
120
130
140
150
160
170
180
190
200
220
240
260
280
300
350
400
450
500
0.2
0.3
0.4
0.6
0.9
1.3
1.8
2.3
3.0
3.7
4.4
5.1
6.1
7.2
8.3
9.4
10.7
12.0
13.4
15.0
0.1
0.2
0.3
0.5
0.6
0.7
0.8
1.0
1.3
1.6
1.9
2.2
2.6
3.1
3.6
4.1
4.6
5.2
5.8
6.5
7.9
9.5
11.2
13.0
15.0
1"
0.1
0.2
0.3
0.4
0.5
0.6
0.7
0.8
0.9
1.0
1.1
1.2
1.4
1.6
1.8
2.0
2.2
2.8
3.4
4.0
4.6
5.3
6.0
6.9
7.8
8.7
9.6
10.6
11.7
12.8
13.9
15.0
1 1/2"
0.4
0.5
0.6
0.7
0.8
1.0
1.2
1.4
1.6
1.8
2.1
2.4
2.7
3.0
3.3
3.6
3.9
4.2
4.5
4.9
5.3
5.7
6.2
6.7
7.2
8.3
9.8
11.2
12.8
16.1
20.0
2"
0.8
0.9
1.0
1.2
1.3
1.4
1.5
1.6
1.7
1.9
2.1
2.2
2.3
2.5
2.7
3.2
3.7
4.3
4.9
6.2
7.8
9.5
11.3
13.0
15.1
17.3
20.0
3
4"
0.7
1.1
1.3
1.5
1.6
2.0
2.5
2.9
3.4
3.9
4.5
5.1
5.8
6.5
7.2
8.0
9.0
11.0
13.0
15.0
17.3
20.0
0.7
0.8
0.9
1.0
1.2
1.4
1.6
1.8
2.1
2.4
2.7
3.0
3.2
3.9
4.7
5.5
6.3
7.2
10.0
13.0
16.2
20.0
Information contained in this manual is based upon generally accepted formulas, computations, and trade
practices. Rain Bird Sprinkler Mfg. Corp., and its subsidiaries and affiliates, shall not be responsible or liable
therefore if any problems, difficulties, or injuries should arise from or in connection with the use or application
of this information, or if there is any error herein, typographical or otherwise.
302
Reference
www.rainbird.com
2005 – 2006 Catalog
Warranties
Warranties
Rain Bird’s Professional Customer Satisfaction Policy
II. Golf Products
Rain Bird will repair or replace at no charge any Rain Bird
professional product that fails in normal use within the warranty
period stated below. You must return it to the dealer or distributor
where you bought it. Product failures due to acts of God including
without limitation, lightning and flooding, are not covered by this
warranty. This commitment to repair or replace is our sole and total
warranty.
Golf Rotors: TG-25, DR, DH, DS, ESR and EAGLE™ series Golf rotors
- 3 years. Additionally, any TG-25, DR, DH, DS or EAGLE™ rotor
sold and installed in conjunction with a Rain Bird swing joint 5 years. Proof of concurrent installation is required.
Implied warranties of merchantability and fitness, if applicable,
are limited to one year from the date of sale.
We will not, under any circumstances be liable for incidental or
consequential damages, no matter how they occur.
Swing Joints - 5 years.
Brass And Plastic Valves: EFB and PE-B Remote Control Valves,
and Brass Quick Coupling Valves and Keys - 3 years.
Filtration system controllers - 3 years.
Lake Management Aerator: LM10, LM11, LM20, LM30 - 5 years
Lake Management Aerator: LMM - 2 years
I. Turf Products
Lake Management Aerator Lights - 1 year
Falcon ® 6504 Series rotors, the T-Bird ® Series rotors, R-50 Series
rotors, 7005 and 8005 rotors, 5000 Series rotors, 1800 Series popup spray heads, U-Series nozzles, brass MPR nozzles, A-8S and PA8S-PRS shrub adapters and 1300 and 1400 bubblers, RSD-BEx and
RSD-CEx - 5 years.
All other golf products - 1 year.
III. Agricultural Products
PC Dripline - 3 years
Lake Management Aerator: LM10, LM11, LM20, LM30 - 5 years
Rain Guns - 3 years (in agricultural applications only)
Lake Management Aerator: LMM - 2 years
Disk Filters - 1 year
Lake Management Aerator Lights - 1 year
Pressure Gauges - 1 year
Commercial Pump Stations - 24 months from the start-up or 30
months from the date of shipment.
All other agricultural products - 2 years.
All other turf products - 3 years.
IV. All Other Products - 1 year.
For more information, see your Rain Bird distributor or call
800-458-3005.
2005 – 2006 Catalog
www.rainbird.com
Warranties
303
Notes
To find the nearest authorized distributor in your area, visit www.rainbird.com
304
Notes
www.rainbird.com
2005 – 2006 Catalog
The
Intelligent
Use of Water
™
At Rain Bird, we believe it is our
responsibility to develop products
and technologies that use water
efficiently. Our commitment also
extends to education, training and
services for our industry and our
communities.
The need to conserve water has
never been greater. We want to do
even more, and with your help,
we can. Visit www.rainbird.com
for more information about
The Intelligent Use of Water.™
Rain Bird Corporation
970 West Sierra Madre Avenue
Azusa, CA 91702
Phone: (626) 812-3400
Fax: (626) 812-3411
Rain Bird Corporation
6991 E. Southpoint Rd., Bldg.#1
Tucson, AZ 85706
Phone: (520) 741-6100
Fax: (520) 741-6522
Rain Bird International, Inc.
145 North Grand Avenue
Glendora, CA 91741
Phone: (626) 963-9311
Fax: (626) 963-4287
Rain Bird Technical Services
(800) RAINBIRD (U.S. and Canada)
Specification Hotline
800-458-3005 (U.S. and Canada)
www.rainbird.com
® Registered Trademark of Rain Bird Corporation
© 2004 Rain Bird Corporation 06/04
D37200E

Product Spec Sheet

Transcription

Similar documents

Install Confidence.™ Install Rain Bird.

Parker Flow Meter and Valve Solutions

Application of the Passy-Muir Tracheostomy and Ventilator

See it. Love it. Do it.

Gage 78 Earth Metal™ Dimensional Surfacing

Psychology Department Newsletter

A guide to dismantling the Theoben H.E. Gas Ram

RAS-C2 Specifications - Direct Heating Supplies

Examples of Low Cost and High Benefit Improvements to a WTE Air

PDF - Haydon Corporation

PRODUCT CATALOGUE 2010