Install Confidence.™ Install Rain Bird.

Transcription

Landscape Irrigation Products
2004 New Products Catalog
Install Confidence.™
Install Rain Bird.®
Table of Contents
1
Table of Contents
Introduction
2
Product Enhancements
6
Spray Heads
8
Rotors
12
Valves
20
Controllers
24
Central Controls
28
Commercial Pump Stations
32
Landscape Drip/Xerigation
38
Accessories
44
Resources & Training
50
www.rainbird.com
Introduction
Introducing New Rain Bird Products For 2004.
®
Every new product for 2004 demonstrates Rain Bird’s ability
to deliver irrigation solutions that enhance your productivity
and profitability, while reinforcing the company’s ongoing
commitment to The Intelligent Use of Water ™.
The introductory section of the catalog highlights several of
Rain Bird’s key new products.
MPR, U-Series and VAN Color-Coded ™ Nozzles
• Now color-coded on the top to
enhance your productivity.
• Quickly identify radius with
Top Color-coded ™ nozzles, and more
easily identify MPR and U-Series arc.
• Top Color-coding makes it easy to
verify proper nozzle installation,
even when the system is not
operating.
More on page 9.
www.rainbird.com
Introduction
2
Introduction
Jar Top Valve
• Threaded bonnet design – no-tools access is easy and convenient
for improved productivity.
• Proven reliability – operating range and specifications similar to
those of the industry-leading Rain Bird DV Valve.
• Value and versatility – competitively priced and available in both
female threaded and slip-by-slip configurations.
More on page 21-22.
SiteControl
• Easy and intuitive programming tools allow
irrigation and system set-up to be
done in minutes.
ESP Modular Controller
• Easily upgrades from a 4-station base unit to 13 stations
with the addition of 3-station modules at installation or in
the future.
• Contractor Default™ Program allows retrieval of program
you save into memory.
• Expand your system and
feature set by purchasing only
what you need – up to 9 different software
modules ranging from Smart Weather module to
the hybrid module (decoders and satellites on
the same system).
More on pages 25-26.
• Hot-swappable Modules can be installed in any position
and while the controller is in operation.
3
• Interactive mapping and
on-screen graphics illustrate
your complete site with
location of individual rotors.
Extensive status reporting is
a simple click away.
Introduction
www.rainbird.com
Introduction
CRE and BP Series Pump Stations
• Variable Frequency Drive (VFD) technology
reduces energy costs, system wear and noise
levels, while maintaining constant pressure under
varying irrigation system demands.
• Complete packaged pump systems are fully
configured and performance tested before they leave
the factory for true "plug'n play" installation.
• Our 2-year warranty provides peace of mind and
is twice the industry standard.
Easy Fit Compression Fittings
• Patent-pending Easy Fit design facilitates
quicker installations.
• Compression fittings with a rubber seal assure
long-term, watertight connections without the use
of clamps.
• Coupling, tee and elbow configurations
accommodate various diameters of 1/2" poly
tubing and dripline, which reduces inventory.
More on page 39.
www.rainbird.com
Introduction
4
Introduction
Black Stripe Tubing
• Vibrant UV resistant stripes (green, purple or yellow)
to easily identify different zones.
• .615 ID - .705 OD and rated to 60 psi.
• Available in 100', 500' and 1,000' coils.
More on page 41.
Wireless Rain Sensor
• Superior Range – over 500 feet line of sight.
• Single-Person Installation – test mode
feature saves time and labor.
• Interchangeable components – use one
transmitter with several receivers.
More on page 46.
Irrigation Supplement
• Increase transplant survival rates by
providing continuous water to the root zone.
• Establish native plants that do not need
permanent irrigation.
• Save time, money and water in remote
applications where traditional irrigation
methods are not practical.
More on page 45.
5
Introduction
www.rainbird.com
2004 Product Enhancements
1800 NP Cover
• New and Improved! Improved design for
better retention.
• Identifies spray head as part of non-potable
water system.
These pages include exciting enhancements to some of
Rain Bird’s existing products. Please refer to the 2003-2004
• Reference page 38 of 2003-2004 Catalog
for additional information.
catalog for additional information, including product
specifications and performance.
1800 NP Cover
5006 Plus with Stainless Steel Riser
• Stainless steel riser helps deter vandalism
on public turf areas.
• Please refer to pages 67-71 of the
2003-2004 Catalog for additional information
on the 5000 Plus Series and nozzle
performance data.
5006-PL-SS
www.rainbird.com
6
ESP-28MC
ESP-36MC
• New 28 and 36 station models offer a wider
range of options to meet varying landscape
design needs.
• Enhanced protection against lightning and
contamination assures reliable performance
and safeguards the investment.
• For more details on ESP-MC Series
controllers, please check pages 158 and
159 in the 2003-2004 Catalog.
ESP-36MC
ESP-Satellites and
ESP-Site-Satellites
• Now available in 28 and 36 Station models,
offering a wider range of options to meet
varying landscape design needs.
• Enhanced protection against lightning and
contamination assures reliable performance
and safeguards the investment.
• Please refer to pages 177-180 of
the 2003-2004 Catalog for full details
regarding the ESP-Satellite and
ESP-SITE-Satellite Series.
ESP-28-SITE-W
7
www.rainbird.com
Spray Heads
Valves
Controllers
Install Confidence.
Install Rain Bird Spray Heads.
™
™
®
®
Rotors
Spray Heads
Central Controls
Commercial
Pump Stations
Landscape Drip/
Xerigation
Accessories
Resources
& Training
Spray Heads
VAN
Nozzles
U-Series/MPR
Nozzles
18 feet
Specialty
15 feet
15 feet
12 feet
12 feet
10 feet
10 feet
Install Confidence. Install Rain Bird 1800
Spray Heads now with Top Color-coded nozzles.
™
®
™
™
8 feet
8 feet
Rain Bird U-Series, MPR and VAN Spray Head nozzles are now
color-coded on the top to enhance your productivity.
6 feet
■ Quickly identify radius with Top Color-coded nozzles, and more
easily identify MPR and U-Series arc.
5 feet
■ Top Color-coding makes it easy to verify proper nozzle installation,
even when system is not operating.
4 feet
9
Now it's easier to sort, easier to organize and easier to install
with Top Color-coded nozzles, now distinctly Rain Bird.
Install Confidence. Install Rain Bird.
Spray Heads
www.rainbird.com
Spray Heads
8 FLT Plastic MPR Nozzles
5° Trajectory
Primary Application
8 FLT MPR nozzles are ideal for irrigating small areas that require a
flat trajectory. Also, these nozzles produce larger water droplet sizes
and are more wind resistant than the standard 8 Series MPR nozzles.
8 FLT MPR nozzles have higher flow than the standard 5, 8, 10, 12 &
15 Series MPR nozzles and should not be mixed in a zone.
Nozzle
Pressure
(PSI)
Radius
(Ft.)
Flow
(gpm)
8F-FLT
15
20
25
30
15
20
25
30
15
20
25
30
6
7
7
8
6
7
7
8
6
7
7
8
1.16
1.30
1.44
1.57
0.58
0.65
0.72
0.79
0.29
0.33
0.36
0.39
8H-FLT
Operating Range
• Spacing: 6 to 8 feet (1,80 m to 2,44 m)
• Pressure: 15 to 30 psi (1,0 to 2,1 bar)
• Optimum pressure: 30 psi (2,1 bar)
8Q-FLT
Features
• Matched precipitation rates within 8 FLT nozzles family – higher
flow than standard 8 Series MPR nozzles. 8 FLT nozzles should not
be mixed with standard 5, 8, 10, 12 & 15 Series MPR nozzles
• Top Color-coded™ gray as specialty nozzles
• 1800™ Series blue finemesh (.02" x .02") filter screens
• Stainless steel adjustment screw to adjust flow and radius. Radius
reduction over 25% of the normal throw of the nozzle is not
recommended
• For use on all 1800 Series and Uni-Spray™ sprinklers, and the
PA-8S and PA-8S-PRS shrub adapters
METRIC
5° Trajectory
Nozzle
Pressure
(Bar)
Radius
(m)
Flow
(m3/h)
Flow
(l/s)
8F-FLT
1,0
1,4
1,7
2,1
1,0
1,4
1,7
2,1
1,0
1,4
1,7
2,1
1,8
2,1
2,1
2,4
1,8
2,1
2,1
2,4
1,8
2,1
2,1
2,4
0,26
0,30
0,33
0,36
0,13
0,15
0,16
0,18
0,07
0,07
0,08
0,09
0,07
0,08
0,09
0,10
0,04
0,04
0,05
0,05
0,02
0,02
0,02
0,02
8H-FLT
8Q-FLT
* All nozzles tested on 4" pop-ups. Performance data taken in zero wind conditions.
8 FLT MPR Nozzles
www.rainbird.com
Spray Heads
10
Spray Heads
2 New Screens for short radius
1800 PCS
Primary Application
Under the nozzle, pressure compensation screens help reduce
pressure fluctuations. Use to control fogging of spray head nozzles
by reducing the incoming pressure or to reduce the radius of the
water pattern. Take control of your system with 1800 PCS Screens.
Features
• Compensates for pressure variations
• Eliminates fogging and water waste caused by high pressures
• Nozzles can be matched with screens to create short-throw,
reduced radius patterns and/or flush-mounted bubblers
• New .08 gpm (0,02 m3/h; 0,01 l/s) and .25 gpm (0,06 m3/h; 0,02
l/s) screens allow greater flexibility in achieving 4', 6' and 7' radius
patterns
• Color-coded for easy identification
• Use with all 1800 Series plastic nozzles (MPR, VAN, U-Series,
Strips and Bubblers)
• Easily installed in new and retrofit applications. Simply replace
standard screen with PCS screen
Models
PCS-008: 0.08 gpm (0,02 m3/h; 0,01 l/s) – Beige NEW
PCS-010: 0.1 gpm (0,02 m3/h; 0,01 l/s) – Purple
PCS-020: 0.2 gpm (0,05 m3/h; 0,02 l/s) – Brown
PCS-025: 0.25 gpm (0,06 m3/h; 0,02 l/s) – Pink NEW
PCS-030: 0.3 gpm (0,07 m3/h; 0,02 l/s) – Silver
PCS-040: 0.4 gpm (0,09 m3/h; 0,03 l/s) – Orange
PCS-060: 0.6 gpm (0,14 m3/h; 0,04 l/s) – Black
PCS-090: 0.9 gpm (0,20 m3/h; 0,06 l/s) – White
PCS-125: 1.25 gpm (0,28 m3/h; 0,08 l/s) – Green
PCS-175: 1.75 gpm (0,40 m3/h; 0,11 l/s) – Yellow
PCS-260: 2.6 gpm (0,59 m3/h; 0,16 l/s) – Blue
PCS-370: 3.7 gpm (0,84 m3/h; 0,23 l/s) – Red
Recommended nozzle + PCS combinations to achieve
4', 6' and 7' radii.*
*With a pressure compensator, outlet pressure will be reduced, but
will fluctuate as the inlet pressure changes. A pressure compensator
cannot maintain outlet pressure at a constant rate. A pressure
regulator establishes and maintains a constant outlet pressure of 30
psi (2,1 bar) as long as the inlet pressure at the spray head is greater
than 30 psi (2,1 bar).
Operating Range
Flow: 0.08 to 3.70 gpm (0,02 to 0,84 m3/h; 0,01 to 0,23 l/s)
Pressure: 15 to 70 psi (1,0 to 4,8 bar)
Nozzle
PCS
Feet
Meters
5Q
8Q-FLT
8Q-FLT
8H-FLT
8H-FLT
8F-FLT
8F-FLT
Beige
Pink
Black
Pink
Silver
Black
White
4'
6'
7'
4'
7'
4'
7'
(1,2)
(1,8)
(2,1)
(1,2)
(2,1)
(1,2)
(2,1)
Note: Radius reduction data tested at 30 psi (1,5 bar).
*Individual results may vary based on site conditions.
1800 PCS
11
Spray Heads
www.rainbird.com
Spray Heads
Rotors
Controllers
Central Controls
Install Confidence.
Install Rain Bird Rotors.
™
™
®
®
Valves
Rotors
Commercial
Pump Stations
Landscape Drip/
Xerigation
Accessories
Resources
& Training
Rotors
FAC T
R E P O RT
Installsuperior
superiorwater
waterdistribution
distributionfor
forgreen
greengrass
grassresults.
results.
Install
Only Rain Bird rotors have Rain Curtain nozzle technology
that features larger water droplets for resistance to windy
conditions, effective close-in watering to eliminate dry spots
near the rotor and even distribution over the entire radius
range. In side-by-side comparisons with the competition, the
clear advantages of Rain Curtain technology can actually be
seen with the naked eye.
Rain Curtain Technology
The Competition
Rain Curtain technology is only available on Rain Bird rotors,
including the 3500 Series, 5000 and 5000 Plus Series,
Falcon® 6504, 7005 and 8005.
Rotors tested at consistent psi with no physical disruption of the stream.
13
Rotors
www.rainbird.com
Rotors
™
™ technology
Install
proven
Rain
Curtain
Install proven Rain Curtain technology.
There are three elements which create the superior coverage of
Rain Curtain nozzle technology.
1
Large Droplets for Consistent Performance
How is Nozzle Performance Measured?
Scheduling Coefficient (SC) is one of the most accurate
ways to measure water distribution.
■ SC measures how much longer you must water the entire
area for the driest sections to receive sufficient water.
■ The lower the SC, the better the rotor distributes water.
A SC of 1.0 represents perfect uniformity. Tests show
that even rain has an SC greater than 1.0.**
Rain Curtain technology produces larger water droplets that
are far less susceptible to wind, and greatly minimizes misting
and airborne evaporation. This competitive advantage assures
that the right amount of water goes where it needs to go which
saves time, money and equally important, one of nature’s most
valuable resources.
2
Effective Close-in Watering
■ Test results from side-by-side comparisons with
competitive nozzle products prove that Rain Curtain
technology consistently outperforms the competition
with the lowest scheduling coefficients—as low as 1.1.*
*Based on tests conducted at Rain Bird’s Product Research Center
in Glendora, CA. Test results reflect a comparison of Rain Bird’s
products with those of its principal competitors.
**Based on a report published by The Center for Irrigation Technology.
Engineered Rain Curtain Technology
Long-range
Watering Port
Close-in
Watering Port
Mid-range
Watering Port
Effective and gentle close-in watering eliminates dry spots
around the rotor without seed washout.
3
Even Distribution Over the Entire Radius
Rain Bird’s broad range of Rain Curtain nozzles [0.54-36.3 gpm
(0,12-8,24 m3/h), 15-81 ft. (4,6-24,7m)] is engineered to deliver
optimum distribution uniformity across the entire radius range.
This uniformity compensates for varying environmental conditions,
offering flexibility to the designer and assuring green grass results.
In Rain Bird commercial rotors,
Rain Curtain technology centers
around three watering ports that
deliver long-range, mid-range
and close-in water for optimum
distribution uniformity. This
uniformity across the entire
radius range greatly diminishes
dependence on near-perfect head-to-head spacing, and
reduces the need to overwater because there are no
gaps in coverage. The close-in watering port features an
expansion chamber that actually takes energy out of that
part of the stream which is diverted downward around the
head. By reducing the velocity of the water by as much as
90%, effective close-in watering is achieved. The close-in
water flowing out of the bottom of this port is distributed
gently, even though the rotor is operating at a relatively
high flow and pressure.
▲
Call 1-800-RainBird (U.S. only) or visit www.rainbird.com for the name of your Rain Bird Distributor.
www.rainbird.com
Rotors
14
Rotors
Full- or Part-Circle Rotor Pop-Up Sprinklers
5000 Series
Take Performance to the Top
Primary Application
Residential, commercial and athletic field sites - spacing up to 50 feet
(15,2 m).
The 5000 Series Rotor is a rugged mid-range gear-drive rotor,
offering durability, performance and the convenience of arc
adjustment from the top, for residential and light commercial
applications.
This versatile rotor offers a standard rubber cover and the
convenience of reversing full- and part-circle operation (up to 360
degrees) in one unit. And, with a tree of Rain Curtain™ nozzles,
the 5000 Series Rotor offers excellent distribution for top-notch
efficiency.
• Tree of nozzles including eight Rain Curtain™ nozzles (angle of
trajectory 25°) and four Low Angle nozzles (angle of trajectory 10°)
provides 25 to 50 feet (7,6 to 15,2 m) distance of throw
• Radius adjustment screw allows up to 25% radius reduction
without changing nozzles
• True 4" (10 cm) pop-up (measured from the cover to the nozzle)
• Quick Check Arc/Fast Forward
• Pressure-activated multi-function wiper seal protects internals from
debris and assures positive pop-up and retraction
• Reinforced flow path for additional side load strength
• Additional o-rings and seals for extra protection in “gritty” water
• Self-adjusting stator does not require replacement when changing
nozzles
• Heavy-duty retract spring assures positive pop-down
All of this, a proven gear-driven design, and a five-year trade
warranty, makes the 5000 Series Rotor one head that will
"Take Performance to the Top."
Features
• The 5000 Series Rotor is available in Shrub, 4", 6" and 12"*
models
• Top-adjust arc adjustment requiring only a flat bladed screwdriver
• Improved arc adjustment for smoother adjustability over the life of
the rotor
• Five-year trade warranty
• Water-lubricated gear-drive design for durable, reliable operation
• Standard rubber cover
• 40- 360° Arc Rotation and reversing Full-Circle rotation in one
(A non-reversing full-circle only unit is also available)
5000 Shrub
15
Rotors
* Note: Pop-up height measured from the cover to the nozzle. Overall body height is
measured popped down.
Options
• Optional Pre-installed Rain Curtain ™ nozzles
• Optional Seal-A-Matic™ (SAM) check valve holds back up to 7 feet
(2,1 m) of elevation change, to prevent puddling and erosion
caused by low head drainage
• Optional non-potable cover for easy identification of reclaimed
water
5004
www.rainbird.com
5006
5012
Rotors
5000 Series
Operating Range
• Precipitation rate: .20 to 1.01 inches per hour (5 to 26 mm/h)
• Radius: 25 to 50 feet (7,6 to 15,2 m)
• Radius may be reduced up to 25% with radius reduction screw
• Pressure: 25-65 psi (1,7 to 4,5 bar)
• Flow Rate: .73 to 9.6 gpm (0,17 to 2,18 m 3/h)
Specifications
• 3⁄4" (20/27) NPT female bottom threaded inlet
• Reversing full- and part-circle adjustment 40° – 360°
• Full-circle only adjustment 360°
Dimensions
• Pop-up height: Shrub 4" (10 cm); 4" (10 cm); 6" (15 cm);
12" (30 cm)
• Overall body height: Shrub: 7 3⁄4" (19,7 cm); 4": 7 3⁄8" (18, 5 cm);
6": 9 5⁄8" (24,5 cm); 12": 16 7⁄8" (42,9 cm)
• Exposed surface diameter: 1 3⁄8" (4,5 cm)
Models
Part-Circle units (PC) are adjustable from 40 –360 degrees.
Full-Circle units (FC) are 360 degrees only.
• 5000-S-PC-SAM
• 5000-S-FC-SAM
• 5004-PC-SAM
• 5004-FC-SAM
• 5006-PC-SAM
• 5006-FC-SAM
• 5012-PC-SAM
• 5012-FC-SAM
• 5004-PC-SAM-N
• 5004-FC-SAM-N
• 5006-PC-SAM-N
• 5006-FC-SAM-N
• 5012-PC-SAM-N
• 5012-FC-SAM-N
5004 - S - PC - SAM - N
Options
SAM;
Non-potable cover
How to Specify
• 5000-S-PC
• 5000-S-FC
• 5004-PC
• 5004-FC
• 5004-PC-2.0
• 5004-PC-3.0
• 5006-PC
• 5006-FC
• 5012-PC
• 5012-FC
• 5004-PC-N
• 5004-FC-N
• 5006-PC-N
• 5006-FC-N
• 5012-PC-N
• 5012-FC-N
www.rainbird.com
Rotation
“PC” for 40 - 360 degrees
“FC” for 360 degrees only
Model
Shrub
Model
5000 Series 4" pop-up
Rotors
16
Rotors
5000 Standard Angle Rain Curtain Nozzle Performance
▲
■
▲
Pressure
psi
Nozzle
Radius
ft.
Flow
GPM
Precip
In/h
Precip
In/h
Pressure
psi
Nozzle
Radius
ft.
Flow
GPM
Precip
In/h
Precip
In/h
25
1.5
2.0
2.5
3.0
4.0
5.0
6.0
8.0
1.5
2.0
2.5
3.0
4.0
5.0
6.0
8.0
1.5
2.0
2.5
3.0
4.0
5.0
6.0
8.0
33
35
35
36
37
39
39
36
34
36
37
38
40
41
43
43
35
37
37
40
42
45
46
47
1.12
1.50
1.81
2.26
2.91
3.72
4.25
5.90
1.35
1.81
2.17
2.71
3.50
4.47
5.23
7.06
1.54
2.07
2.51
3.09
4.01
5.09
6.01
8.03
0.20
0.24
0.28
0.34
0.41
0.47
0.54
0.88
0.22
0.27
0.31
0.36
0.42
0.51
0.54
0.74
0.24
0.29
0.35
0.37
0.44
0.48
0.55
0.70
0.23
0.27
0.33
0.39
0.47
0.54
0.62
1.01
0.26
0.31
0.35
0.42
0.49
0.59
0.63
0.85
0.28
0.34
0.41
0.43
0.51
0.56
0.63
0.81
55
1.5
2.0
2.5
3.0
4.0
5.0
6.0
8.0
1.5
2.0
2.5
3.0
4.0
5.0
6.0
8.0
35
37
37
40
42
45
47
50
34
35
37
40
42
45
48
50
1.71
2.30
2.76
3.47
4.44
5.66
6.63
8.86
1.86
2.52
3.01
3.78
4.83
6.16
7.22
9.63
0.27
0.32
0.39
0.42
0.48
0.54
0.58
0.68
0.31
0.40
0.42
0.45
0.53
0.59
0.60
0.74
0.31
0.37
0.45
0.48
0.56
0.62
0.67
0.79
0.36
0.46
0.49
0.53
0.61
0.68
0.70
0.86
35
45
17
■
Rotors
65
www.rainbird.com
Precipitation Rates based on half-circle operation.
■ Square spacing based on 50% diameter of throw.
▲ Triangular spacing based on 50% diameter of throw.
Performance data collected in zero wind conditions.
Rotors
5000 Standard Angle Rain Curtain Nozzle Performance
■
METRIC
▲
■
▲
Pressure
bar
Nozzle
Radius Flow
m
m3⁄h
Flow
l/s
Precip Precip
mm/h mm/h
Pressure
bar
Nozzle
Radius Flow
m
m3⁄h
Flow
l/s
Precip Precip
mm/h mm/h
1,7
1,5
2,0
2,5
3,0
4,0
5,0
6,0
8,0
1,5
2,0
2,5
3,0
4,0
5,0
6,0
8,0
1,5
2,0
2,5
3,0
4,0
5,0
6,0
8,0
1,5
2,0
2,5
3,0
4,0
5,0
6,0
8,0
10,10
10,70
10,70
11,00
11,3
11,90
11,90
11,00
10,20
10,80
10,90
11,20
11,6
12,10
12,40
11,80
10,40
11,00
11,30
11,20
12,3
12,70
13,20
13,30
10,60
11,20
11,30
12,10
12,7
13,50
13,90
14,10
0,07
0,09
0,11
0,14
0,18
0,23
0,27
0,37
0,08
0,10
0,12
0,15
0,20
0,25
0,29
0,40
0,09
0,11
0,14
0,17
0,22
0,29
0,34
0,45
0,10
0,13
0,16
0,19
0,25
0,31
0,37
0,50
5
6
7
8
10
12
14
22
5
6
7
9
11
12
14
21
6
7
8
9
11
13
14
19
6
7
9
9
11
12
14
18
3,5
1,5
2,0
2,5
3,0
4,0
5,0
6,0
8,0
1,5
2,0
2,5
3,0
4,0
5,0
6,0
8,0
1,5
2,0
2,5
3,0
4,0
5,0
6,0
8,0
10,70
11,30
11,30
12,20
12,8
13,70
14,20
14,90
10,60
11,10
11,30
12,20
12,8
13,70
14,90
15,20
10,40
10,70
11,30
12,20
12,8
13,70
14,60
15,20
0,10
0,14
0,17
0,21
0,27
0,34
0,40
0,54
0,11
0,15
0,18
0,22
0,29
0,37
0,43
0,57
0,12
0,15
0,19
0,23
0,30
0,39
0,47
0,61
7
8
9
10
12
13
14
18
7
8
10
11
13
14
15
18
8
10
11
11
13
15
15
19
2,0
2,5
3,0
0,25
0,34
0,41
0,51
0,66
0,84
0,97
1,34
0,28
0,36
0,44
0,55
0,71
0,91
1,05
1,45
0,31
0,41
0,50
0,62
0,81
1,03
1,21
1,63
0,34
0,45
0,56
0,69
0,89
1,13
1,34
1,79
6
7
8
10
12
14
16
26
6
7
9
10
12
14
16
24
7
8
9
11
13
15
16
21
7
8
10
11
13
14
16
21
4,0
4,5
0,37
0,49
0,60
0,74
0,97
1,23
1,45
1,93
0,40
0,52
0,64
0,80
1,04
1,32
1,55
2,06
0,42
0,55
0,68
0,84
1,10
1,40
1,64
2,19
8
9
11
12
14
15
17
20
8
10
12
12
15
16
17
21
9
11
12
13
15
17
18
22
www.rainbird.com
Rotors
18
Rotors
5000 Low Angle Nozzle Performance
METRIC
■
▲
■
▲
Pressure
psi
Nozzle
Radius
ft.
Flow
GPM
Precip
In/h
Precip
In/h
Pressure
bar
Nozzle
Radius Flow
m
m3⁄h
Flow
l/s
Precip Precip
mm/h mm/h
25
1.0 LA
1.5 LA
2.0 LA
3.0 LA
1.0 LA
1.5 LA
2.0 LA
3.0 LA
1.0 LA
1.5 LA
2.0 LA
3.0 LA
1.0 LA
1.5 LA
2.0 LA
3.0 LA
1.0 LA
1.5 LA
2.0 LA
3.0 LA
25
27
29
29
28
30
31
33
29
31
32
35
29
31
33
36
29
31
33
36
0.76
1.15
1.47
2.23
0.92
1.38
1.77
2.68
1.05
1.58
2.02
3.07
1.17
1.76
2.24
3.41
1.27
1.92
2.45
3.72
0.23
0.30
0.34
0.51
0.23
0.30
0.35
0.47
0.24
0.32
0.38
0.48
0.27
0.35
0.40
0.51
0.29
0.38
0.43
0.55
0.27
0.35
0.39
0.59
0.26
0.34
0.41
0.55
0.28
0.37
0.44
0.56
0.31
0.41
0.46
0.58
0.34
0.44
0.50
0.64
1,7
1,0 LA
1,5 LA
2,0 LA
3,0 LA
1,0 LA
1,5 LA
2,0 LA
3,0 LA
1,0 LA
1,5 LA
2,0 LA
3,0 LA
1,0 LA
1,5 LA
2,0 LA
3,0 LA
1,0 LA
1,5 LA
2,0 LA
3,0 LA
1,0 LA
1,5 LA
2,0 LA
3,0 LA
1,0 LA
1,5 LA
2,0 LA
3,0 LA
7,60
8,20
8,80
8,80
8,00
8,60
9,10
9,30
8,60
9,20
9,50
10,10
8,80
9,40
9,70
10,60
8,80
9,40
9,90
10,80
8,80
9,40
10,10
11,00
8,80
9,40
10,10
11,00
0,05
0,07
0,09
0,14
0,05
0,08
0,10
0,15
0,06
0,09
0,11
0,17
0,06
0,10
0,13
0,19
0,07
0,11
0,14
0,21
0,07
0,11
0,15
0,22
0,08
0,12
0,15
0,23
6
8
9
13
6
8
9
13
5
8
9
12
6
8
10
12
6
9
10
13
7
9
10
13
7
10
11
14
35
45
55
65
2,0
2,5
3,0
3,5
4,0
4,5
0,17
0,26
0,33
0,51
0,18
0,28
0,36
0,55
0,20
0,32
0,41
0,62
0,22
0,35
0,45
0,68
0,24
0,38
0,49
0,74
0,26
0,41
0,52
0,80
0,27
0,44
0,56
0,84
19
Rotors
www.rainbird.com
7
9
10
15
6
9
10
15
6
9
10
14
7
9
11
14
7
10
11
15
8
11
12
15
8
11
13
16
Spray Heads
Rotors
®
®
Install Confidence.
Install Rain Bird Valves.
™
™
Valves
Controllers
Valves
Central Controls
Commercial
Pump Stations
Landscape Drip/
Xerigation
Accessories
Resources
& Training
Valves
Versatility, Value, Convenience
Jar Top Valve Series
Primary Application
The Rain Bird Jar Top Valve (JTV) provides versatility, reliability,
affordability and ease of service for residential and light commercial
applications. The threaded bonnet design allows for tool-free access
and maintenance, eliminating the need to remove and replace
multiple screws.
• Available in 1" (26/34) Slip x Slip (SS) configuration for low cost,
solvent-weld installations
• External bleed to manually flush system of dirt and debris during
installation and system start up
• Internal bleed for spray-free manual operation
Features
Reliability
• Double-filtered pilot flow for maximum reliability
• Balanced-pressure diaphragm for long life
• Buna-N diaphragm with self-cleaning 90-mesh (200 micron)
pilot water filter and stainless steel spring
• Energy efficient, low-power encapsulated solenoid with
captured plunger
Ease of Service
• Threaded bonnet provides easy removal with no screws
• Trouble-free service with few parts
• Drop-in diaphragm for effortless maintenance
Versatility
• Operates in low-flow and Xerigation® applications when the
RBY filter is installed upstream
• Accepts latching solenoid for use with Rain Bird batteryoperated controllers
• Available in 1" (26/34) globe configuration with female NPT and
BSP threads
Operating Range
• Pressure: 15 to 150 PSI (1,0 to 10,4 bar)
• Flow: 0.25 to 30 GPM (0,06 to 6,81 m3/h; 0,02 to 1,89 l/s); for
flows below 3 GPM (0,75 m3/h; 0,21 l/s) or any Xerigation
application, use RBY-100-200MX filter installed upstream
• Operating Temperatures: Water temperature up to 110° F (43° C);
ambient temperature up to 125° F (52° C)
Electrical Specifications
• 24 VAC 50/60 Hz (cycles/sec.) solenoid
• Inrush current: 0.30 A (7.2 VA) at 60 Hz
• Holding current: 0.19 A (4.6 VA) at 60 Hz
• Coil resistance: 42-55 Ohms
Dimensions
• Height: 5"
• Length: 4"
• Width: 3 1/8"
Models
• 100-JTV: 1" (26/34) Female Threaded Inlet and Outlet*
• 100-JTV-SS: 1" (26/34) Slip x Slip
* BSP threads available; specify when ordering
100-JTV
21
Valves
www.rainbird.com
Valves
Jar Top Valve Series
METRIC
Jar Top Valve Pressure Loss (bar)
Jar Top Valve Pressure Loss (psi)
Flow
(gpm)
(psi)
Flow
(m 3/h)
l/s
bar
1
3
5
10
15
20
30
2.5
2.8
3.1
4.1
5.3
6.2
9.3
0,23
0,68
1,14
2,27
3,41
4,54
6,81
0,06
0,19
0,32
0,63
0,95
1,26
1,89
0,17
0,19
0,21
0,28
0,37
0,43
0,64
100- JTV- SS
Optional Configuration:
SS: Slip x Slip
How to Specify
Model
JTV: Jar Top Valve
www.rainbird.com
Valves
Size
100: 1" (26/34)
Note: For non-U.S. applications it
is necessary to specify NPT or BSP
thread type.
22
Valves
Union x Union and Union x Barb
Valve Pressure Loss (psi)
100DVUU, 100DVFUU, 100DVUB, 100DVFUB
Primary Application
The DV/DVF valve product family has just expanded to include the
new line of Union Valves. These new DV/DVF valves combine
reliability with the convenience of half union fittings. Use these new
valves for quick and easy assembly and disassembly of valve
manifolds. Available NOW in both 1" union and barb configurations.
Please refer to page 119 and 120 of the 2003-2004 Catalog for the
complete description.
Features
DV SERIES
• 1" Union-by-Union (UU) female union thread configuration for quick
and easy manifolding
• 1" Union-by-Barb (UB) female union thread inlet by barb outlet
configuration for quick and easy manifolding for use with poly pipe
Operating Range
• 100-DV/DVF (union) Flow: 0.2 to 20 gpm (0,05 to 4,54 m 3/h, 0,01
to 1,26 l/s); for flows below 3 gpm (0,75 m 3/h; 0,21 l/s) or any
Xerigation application, use RBY-100-200MX filter installed upstream
• 24 VAC 50/60 Hz (cycles per second)
solenoid power requirement
• 0.30 A (7.2 VA) inrush current
• 0.23 A (5.5 VA) holding current
• Solenoid coil resistance: 38 Ohms
Dimensions
DV SERIES
• Height: 4 1/2" (11,4 cm)
• Length: (UU) 5 7⁄8" (14,9 cm)
• Width: 3 1/3" (8,4 cm)
Flow
(gpm)
Union x Union
1" (psi)
Union x Barb
1" (psi)
1
3
5
10
20
30
40
2.3
2.9
3.1
3.9
7.5
-
2.0
2.3
2.9
3.7
6.6
-
Union x Union and Union x Barb
Valve Pressure Loss (bar)
METRIC
Flow
(m 3/h)
Union x Union
1" (bar)
Union x Barb
1" (bar)
0,25
0,75
1,0
2,0
5,0
7,5
9,1
0,16
0,20
0,21
0,27
0,52
-
0,14
0,16
0,20
0,26
0,46
-
DV/DVF Union x Union and Union x Barb not recommended for flows exceeding 20
gpm (4,54 m3/h;1,26 l/s).
DVF SERIES
• Height: 5 3/5" (14,2 cm)
• Length: (UU) 5 7⁄8" (14,9 cm)
• Width: 3 1/3" (8,4 cm)
(UB) 6" (15,2 cm)
Models
• 100-DV-UU: 1" (26/34)*
• 100-DV-UB: 1" (26/34)
• 100-DVF-UU: 1" (26/34)*
• 100-DVF-UB: 1" (26/34)
(UB) 6" (15,2 cm)
*Available with BSP threads
100- DVF- MB
Optional Configuration:
UU: Union x Union
UB: Union x Barb
Model
DV: Remote Control Valve
Size
100: 1" (26/34)
Note: For non-U.S. applications it
is necessary to specify NPT or BSP
thread type.
23
How to Specify
Optional Feature
F: Flow Control
Valves
100-DV-UU
www.rainbird.com
100-DVF-UB
Spray Heads
™
™
®
®
Rotors
Install Confidence.
Install Rain Bird Controllers.
Valves
Controllers
Central Controls
Controllers
Commercial
Pump Stations
Landscape Drip/
Xerigation
Accessories
Resources
& Training
Controllers
Indoor or Outdoor for Residential and Light Commercial Use
ESP Modular Series
Primary Application
A member of the popular ESP family of controllers, the ESP Modular
is designed for residential and light commercial landscapes where
flexibility to adapt to growing landscaping needs is key. Never again
will you have to replace a controller to add more stations. This
controller maximizes your productivity by saving you time and money.
It improves upon Rain Bird’s already easy to use ESP style of
programming with a large, easy to read display and intuitive
programming sequence, making this the most user-friendly controller
in its class. And features like the Contractor Default ™ program make
service calls more efficient and earn you more money by taking less
time. ESP Modular controllers make time work to your advantage.
Features
• Easily upgrades from a four station base model to 13 stations with
the addition of 3-station modules at installation or in the future
• Hot-swappable modules can be installed while the controller is in
operation and in any position
• Contractor Default ™ Program allows the contractor to save his own
default program and retrieve it with the push of a button. Useful in
easily reloading a schedule that has been altered by a homeowner
or to replace a temporary schedule for new seed or sod
• Enhanced Diagnostic Feedback™ alerts the user to conditions when
watering is suspended due to an activated sensor, shorted stations
or programming errors with a warning light and text message on
the LCD
• Auxiliary Station™ can be set to bypass an active sensor to allow
watering even if the other stations are disabled or can be set as a
normal station
• 365-day calendar with leap year intelligence means that you can
set an “Odd” or “Even” day watering schedule and not worry about
changing the date on leap years
• Four irrigation cycle modes for maximum flexibility and compliance
to all major watering restrictions (Custom 7-day calendar, cyclic
1-31 day interval, and odd/even day calendar)
• Non-volatile memory maintains the irrigation schedule indefinitely
during a power outage
• Lithium battery maintains the time and date for up to 6 months
during a power outage
• Permanent day off allows the user to set any day of the week as a
non-watering day in any program or schedule, making it easy to
comply with watering restrictions or other requirements such as
weekly lawn care or maintenance
• Global season adjust (0-200%) allows the user to alter the run time
of all the valves in every program with the push of a button
• Dedicated sensor terminals allow the user to easily connect a
sensor to the controller for maximum water efficiency. A light (LED)
and a message on the LCD indicates when a sensor is active
• Sensor bypass switch allows the user to override an active sensor
• Fuseless, diagnostic circuit breaker identifies a station with valve or
wiring problems and continues to water operable stations
• “Valve Test Terminal” allows the installer to test the valve wires
during installation to determine the valve that each wire is
connected to
• Spacious heavy-duty cabinet with internal junction box provides lots
of room for wiring and eliminates the need to purchase an external
j-box for a clean and professional looking installation. Outdoor
model comes with key-locking cabinet
• “Remote Ready” connector enables the controller to be used with
Rain Bird’s RM1 and RMX1 multi-function remote control systems
ESP Modular
25
Controllers
www.rainbird.com
Controllers
Operating Specifications
• Number of programs: 3 independent
• Automatic Starts: 4 per program, 12 total
• Station timing: 0 to 4 hours for all stations
• Independent programming schedules:
- Custom (user selects the day of the week to water)
- Odd (watering occurs on only odd days of the month minus the
31st and February 29th if a leap year)
- Even (watering occurs on only even days of the month)
- Cyclical (watering occurs between from once a day to once
every 31 days)
• Input required: 120 VAC ± 20%, 60Hz / 230VAC ± 20%, 50Hz /
240VAC ± 20%, 50Hz
• Output: 25.5 VAC 1A
• Surge Protection: Primary input side has built in MOV (metal oxide
varistor) to protect circuitry. Output side has 1 built in MOV for each
valve station
• Power back-up: Lithium coin-cell battery maintains time and date
while non-volatile memory maintains the schedule
• Multi-valve station capacity: Up to two 24 VAC, 7A solenoid valves
per station plus a master valve
Dimensions
• Width: 10.7" (27,2 cm)
• Height: 7.7" (19,5 cm)
• Depth: 4.4" (11,2 cm)
Models
• ESP-4Mi: 4 station module indoor model
• ESP-4M: 4 station module outdoor model*
• ESP-SM3: 3 station module
*Available in 230VAC and 240V AC models
How to Specify
ESP-4Mi
www.rainbird.com
ESP-SM3
Modules
3 Station Module
Controller Base Model
ESP-4Mi: Indoor
ESP-4M: Outdoor
Controllers
26
Controllers
Extra-Simple Programming and Easy Installation
ESP-TM Series Controllers
Primary Application
Incorporating all the proven features of the ESP Series, the ESP-TM
family of hybrid controllers is a prime example of making a good
thing better. With their slim line cabinets, ESP-TM controllers are as
attractive to look at as they are simple to use.
• Slim, indoor cabinet
• Manual start/advance capability for semiautomatic operation
• Mounting screws provided
• Large, high contrast LCD
And, they boast a number of water-saving features simply not found
on competitively priced units. Dual programming eliminates over
watering one area in order to maintain another. Watering time
flexibility is further enhanced by two-, three- and five-day fixed
watering cycles or a seven-day variable cycle. Best of all, water
budgeting can alter all watering times from 10 to 200 percentwith just a single touch.
• Station timing: 0-99 minutes (in 1-minute increments); 0-198
minutes with water budgeting
• Automatic starts: 3 per day for each program (6 per day when using
dual program capability)
• Programming schedule: 2-, 3- or 5-day fixed cycle or 7-day
variable cycle
• Water budgeting: 10-200% in 10% increments
The ESP-TM Series from Rain Bird. Simplicity at its finest.
Features
• ESP Extra-Simple Programming
• Two independent programs (A and B)
• “Flip Strip “ terminal strip permits valve wire hookup without
screws
• Wiring skirt for clean looking, professional installation
• System water budgeting makes seasonal adjustments quick
and easy
• Precise station timing in 1-minute increments
• Programmable day-of-week watering schedule
• Independent dual programming
• Easy-to-understand AM/PM clock
• Self-prompting alphanumeric liquid crystal display (LCD)
• .65A external plug-in style transformer
• Input required: 117VAC, 60Hz
• Output 24VAC, .65A
• Overload fuse: .5A (spare fuse provided in access cover)
• Surge protection: Primary input side has built-in MO V (metal oxide
varistor) to protect microcircuitry. Output side has 1 built-in MO V
for each valve station. A grounding wire for output surge protection
system is provided
• Battery backup: A 3V lithium coin cell battery maintains program
memory up to several months and keeps timing accuracy during a
power outage (battery included with controller)
• Default program: After prolonged power interruption, each station
waters 10 minutes beginning 8 hours after power resumes—once
per day for the 7-day custom cycle or on the first day of the 2-,
3- or 5-day fixed cycle
• Single-valve station capacity: One 24 VAC, 7VA solenoid valve per
station, plus a master valve
Dimensions
• Width: 7" (17,8 cm)
• Height: 8 1⁄4" (21 cm)
• Depth: 2 1⁄4" (5,7 cm)
ESP - 4TM
Models
• ESP-4TM: 4 stations
27
Controllers
www.rainbird.com
How to Specify
ESP-6TM
Number of Stations
4: 4 Stations
6: 6 Stations
8: 8 Stations
Model
ESP-TM: Indoor
Spray Heads
Rotors
Valves
Controllers
™
™
Central Controls
Install Confidence.
Install Rain Bird Central Controls.
®
®
Commercial
Pump Stations
Central Controls
Landscape Drip/
Xerigation
Accessories
Resources
& Training
Central Controls
A Full-Featured State-of-the-Art Commercial Central Control System for Single Site Applications
SiteControl
Primary Application
SiteControl Central Control Systems are designed for large residence,
commercial and industrial applications. One site can be controlled and
monitored from the system with satellites and/or decoders.
Basic Control Features
• From the SiteControl Central Controller, the irrigation system can
be scheduled for days to water, run times, linking schedules, sensor
starts, cycle and soak schedules, ET sensitized scheduling, etc.
• Interactive map allows for maximum site control yet easy
programming, monitoring and troubleshooting for operator
• Verify programming down to station level by utilizing the
intuitive dry run feature
• Manual operation of system from central computer via direct
manual access (DMA)
• Operation of non-irrigation system such as lighting, security gates,
fountains, pumps, sensors, etc.
Additional Features
Advanced Graphical Mapping
• Maps generated by GPS technology or AutoCAD recreate your site
• Interactive mapping and on-screen graphics show your complete
site with location of individual rotors. Extensive status reporting is a
click away
• Map utilities software module allows you to measure and calculate
areas from your map
Hybrid system
• Expand your system with the purchase of the hybrid software module
• Operate satellites and/or decoders via a 2 wire-path
Smart Weather ™
• Designed to take complete advantage of Rain Bird’s most advanced
line of weather stations
• Track ET rates with a weather station and react to current
weather conditions through logical sequential steps
• Advanced warning system accepts user-defined sensor thresholds.
System operator is immediately alerted if thresholds are exceeded
Automatic ET
• Automatically adjust run times in relation to fluctuations in
evapotranspiration values
Expanded System Capability
• Utilizes the most advanced software development tools in the industry.
SiteControl offers excellent performance and software/hardware
compatibility
• New system architecture is designed to speed performance
utilizing most current software operating system
• System is modular in nature. Buy only what you need; expand at
a later date
• Increase wire-path capacity by simply purchasing modules
Remote System Control
• Take control of your system and operate SiteControl from anywhere on
your site using the Rain Bird FREEDOM System. Available via digital
phone or radio
Superior Monitoring
• Flo-Graph™ allows visibility of real-time graphics with individual station
information presented in colorful charts
• Flo-Manager™ balances system demands and maximum capacities
with efficiency helping to lower water demand, reduce system wear
and tear and save energy
• Cycle + Soak.™ Better control the application of water on slopes and in
areas with poor drainage
• QuickIRR.™ Quick and easy method to build irrigation schedules and
programs based on your parameters
• Print Office feature prints all monitor log and site information with a
clean and concise format for easy site monitoring and troubleshooting
SiteControl
Other Features
• Advanced Graphical Interface
• Interactive Mapping
29
Central Controls
www.rainbird.com
Central Controls
A Full-Featured State-of-the-Art Commercial Central Control System for Single Site Applications
SiteControl
TWI Series
Primary Application
• Operates Satellites and Decoders on same system
• Water usage logs
• Station run time logs
• Posted & dry run logs
• ET spreadsheet
• Multiple Communication Types
• Operates with all existing Rain Bird Central Control satellites
• PC anywhere32 included (for tech support)
• 1, 3 or 5 year support plans
Models
• SCONSAT
• SCONSATL
• SCONDEC
• SCONPLUS
Software Module Options
• Smart Weather
• Automatic ET
• Hybrid Module
• Smart Sensor
• Map Utilities
• Freedom
• 8 Additional Locations
• Additional Wire-Path (2nd)
• Additional Wire-Path (3rd)
• Additional Wire-Path (4th)
• Upgrade from SiteControl to SiteControl Plus
The Two-Wire Interfaces (TWI) serve as an interface between the
central controller and Rain Bird commercial field satellites (ESP-MC
SAT series) on the SiteControl System.
Features
• TWI operates up to 28 satellites, pulse decoders or sensor decoders
per wire-path
• TWI comes standard with one wire-path, upgradeable to 4 wirepaths with the purchase of an “additional wire-path” module
• Available in either 2-wire or MAXILink ™ wireless communication to
satellite controllers and sensors
• UL-Listed
• Wall Mount: drawn steel, seamless, cabinet with hinged front panel
• Computer data path: hardwire
TWI Hardwire
• Output: 2 x 26.5VAC @ 0.9A 60/50Hz or 4 x 26.5VAC @ 0.9A
50/60Hz
• Circuit Breaker: NA (Autoresettable)
TWI Link
• Input required: 120VAC ± 10% @ 1.25A 60/50Hz or
220/230/240VAC ± 10% @ .5A 50/60Hz
• Output: NA
• Circuit Breaker: NA
• Grounding: All TWI’s shall be grounded to a 10-ohm or less
earth ground
Dimensions
• Width: 15 1/2" (39,4 cm)
• Height: 12 1/2" (31,7 cm)
• Depth: 6" (15,2 cm)
Models
• TWISAT
• TWISATL
220/240/260 VAC (50 Hz)
• ITWISAT
• ITWISATL
TWI Series
www.rainbird.com
Central Controls
30
Central Controls
Decoder Interface Series
FD-101TURF
Primary Application
Primary Application
The Small Decoder Interface (SDI) and Large Decoder Interface (LDI)
serve as an interface between the central controller and Rain Bird
commercial field and sensor decoders (FD-101TURF, FD-102TURF,
FD-202TURF, FD-401TURF, FD-601TURF, SD-210TURF) on the
SiteControl System.
Field Decoder interfacing signal line and individual valve.
Power draw: 0.5 mA (idle) 18 mA (per active solenoid).
Max. load: 1 Rain Bird solenoid.
Please refer to page 189-190 in 2003-2004 Catalog.
Features
• SDI can interface with up to 200 decoder addresses and can
activate up to 400 solenoids
• LDI can interface with up to 500 decoder addresses and can
activate up to 1000 solenoids
• SDI & LDI come standard with 4 wire-paths
• Computer data path: 9-pin serial cable
• Decoder data path: 2-wire
• Wall Mount: heavy-duty, plastic, cabinet with a key-lock door
North America
• Input: 120 VAC ± 10% @ .59A 60Hz
• Output: 24VAC @ 2A 60Hz
• Circuit Breaker: NA (Autoresettable)
FD-101
DPU-210
International Recommended Specifications
(transformer not supplied )
(model: ISDITURF & ILDITURF)
• Input: 220, 230, 240VAC ± 10% @ 0.36A 50Hz
• Output: 24VAC @ 2A 50Hz
• CE and UL
Primary Application
Decoder Programming Unit tests and verifies operation of the
MDC decoders. Also allows for re-programming decoder addresses
for maximum site set-up flexibility. Please refer to page 190 in
2003-2004 Catalog.
Dimensions (LDI and SDI)
• Width: 9 1/2" (24,1 cm)
• Height: 10 1/4" (26 cm)
• Depth: 4 3/8" (11,1 cm)
Models
• SDITURF (w/ transformer)
• ISDITURF (w/o transformer)
• LDITURF (w/ transformer)
• ILDITURF (w/o transformer)
DPU-210
SDI
(LDI not shown)
31
Central Controls
www.rainbird.com
Spray Heads
Rotors
™
™
®
®
Valves
Install Confidence.
Install Rain Bird Commercial
Pump Stations.
Controllers
Central Controls
Commercial
Pump Stations
Landscape Drip/
Xerigation
Commercial
Pump Stations
Accessories
Resources
& Training
Single Pump Systems
CRE Series
Primary Application
Wide range of high quality single-pump systems to serve commercial
irrigation pressure boost and suction/lift applications. Industry leading
VFD (variable frequency drive) technology and pump hydraulic
efficiencies make these pump stations extremely energy efficient.
Ideal when irrigation system demands vary by automatically adjusting
the pump speed to maintain the desired water pressure and flow.
Features
• Twice the industry standard warranty with 24 months from
installation or 30 months from date of purchase
• VFD technology provides quick return on investment and below
industry life-cycle costs, resulting in energy savings of up to 50%
over conventional constant speed pump systems
• System comes standard as a complete package, fully assembled
including stainless steel piping and base, diaphragm tank, shut-off
and check valves, transducers, gauges and power supply
connections
• All systems are fully configured and tested to the customer’s
specified operating requirements prior to leaving the factory
• Vertical, multi-stage, centrifugal return (CRE) pumps maximize
performance, economy and reliability
• State-of-the-art hydraulic pump design and laser welding
manufacturing techniques provide industry’s highest vertical
multi-stage centrifugal pumping efficiencies of up to 80%
• VFD automatically adjusts speed to maintain desired water pressure
as flow varies
• VFD has no moving parts and eliminates the expensive
maintenance of PRV (pressure regulating valve) systems
• Pumps with VFD last longer by adjusting workload to meet system
requirements and offer extremely quiet, low vibration operation
• Low NPSH required for excellent lift
• Corrosion resistant stainless steel construction and Tungsten
Carbide bearings ensure trouble-free performance, long life and low
maintenance costs even under harsh operating conditions
• VFD significantly reduces “water hammer”, which results in less
overall irrigation system stress, wear and tear and ultimately lower
maintenance costs
• Vertical spacing saving design provides the smallest footprint for
the performance in the industry
• Monitoring functions for maximum pressure limits safeguard the
irrigation distribution circuit against pipe damage, as well as
automatic shutdown and restart under dry run and under voltage
conditions
• Pre-assembled, ready-to-install rebuild kits including pump shaft,
impellers, chambers and all associated hardware provide for
consistent and timely repairs
• Unique optional remote control unit (R100) offers additional control
features (automatic head, flow, speed, operating ranges), secure
access (panel lock, manual), data collection (power input, power
consumption, operating hours, set points, faults) and print
functions
• Ample spacing between motor and pump shaft on 15-60 HP motors
allows for a seal change without removing the motor
• Cartridge shaft seal design is such that pump disassembly is not
required to change the seal
CRE 32 - 3 - 2
Reduced Dia. Stages
2
Flow
m 3/hr
Model
CRE
33
CRE-Series
How to Specify
Stages
3
www.rainbird.com
Single Pump Systems
CRE Series
Operating Range
Flow Range 0 - 310 gpm, 0 - 70 m 3/h, 0 - 20 l/s
Head Range 0 - 500 ft, 0 - 152 m
HP Range 1 - 10 hp, .8 - 7.5 kw
Water Temperature Range 32° - 176° F, 0° - 80° C
Maximum Working Pressure 232 psi, 16 bar
Model Weights and Horsepower
Input Required: 50/60 Hz, 1 Phase 208/230 Volt, 3 Phase
208/230/460 Volt
Dimensions
• Width: 9 1/2" (24,1 cm)
• Height: 21.2" - 52.7" (53,8 - 133,9 cm)
• Depth: 4 3/8" (11,1 cm)
Ship
Weight
Motor
Horsepower
CRE 3
CRE 5
CRE 8
CRE16
CRE 32
CRE 45
200 - 295
210 - 310
240 - 360
330 - 370
275 - 380
365
1.0 - 1.5
1.0 - 5.0
1.5 - 7.5
5.0 -10.0
3.0 - 10.0
7.5
Voltage: 1 x 208/230 up to 1.5 H.P. and 3 x 460 for all other models.
H [m] H [ft]
550
150
CRE Series
60 Hz
500
450
125
400
350
100
300
75
250
0
0
0
0
CRE 45
CRE 32
50
CRE 8
100
CRE 5
25
150
CRE 16
200
50
CRE 3
Models
• CRE 3
• CRE 5
• CRE 8
• CRE 16
• CRE 32
• CRE 45
Pump
Model
25 50 75 100 125 150 175 200 225 250 275 300 325
5 10 15 20 25 30 35 40 45 50 55 60 65 70
www.rainbird.com
Q [GPM]
Q [m3/h]
34
Booster Systems
BP Series
Primary Application
Wide range of high quality single-pump and multi-pump systems
to serve commercial irrigation pressure boost and suction/lift
applications. Up to six parallel-connected pumps offers flexible
configurations for diverse and demanding irrigation applications.
Industry leading VFD (variable frequency drive) technology and pump
hydraulic efficiencies make these pump stations extremely energy
efficient. Ideal when irrigation system demands vary by automatically
adjusting the number of pumps required and individual pump speeds
to maintain desired water pressure and flow.
Features
• Twice the industry standard warranty at 24 months from start-up
or 30 months from shipping
• VFD technology provides quick return on investment and below
industry life-cycle costs, resulting in energy savings of up to 50%
over conventional constant speed pump systems
• System comes standard as a complete package, fully assembled
including stainless steel piping and base, diaphragm tank, shut-off
and check valves, transducers, gauges and power supply
connections
• All systems are fully configured and tested to the customer’s
specified operating requirements prior to leaving the factory
• “Smart” Controller switches the system on/off or regulates the
frequency of up to six parallel-connected pumps maintaining
constant pressure and optimized efficiencies over a wide flow
range
• Automatic pump start and cascade control rotation ensure evenly
distributed run-time between all pumps, motors and VFDs
• Multi-pump system offers redundancy and back-up capabilities in
the event of a pump failure. Reduced irrigation capacity is far better
than no irrigation
• Large irrigation areas often require multiple pressure zones. Using
a built-in timer program, the BP Series, with optional PMU 2000
controller, can control up to ten different pressure zones
(set-points)
• VFD has no moving parts and eliminates the expensive
maintenance of a pressure regulating valve
• Unique vertical pump stack design significantly reduces the
footprint over horizontally oriented competitors
• VFD pumps last longer by adjusting workload to meet system
requirements and offer extremely quiet, low vibration operation
• State-of-the-art hydraulic pump design and laser welding
manufacturing techniques provide the industry’s highest vertical
multi-stage centrifugal pumping efficiencies of up to 80%
• VFD significantly reduces “water hammer”, which results in less
overall irrigation system stress, wear and tear and ultimately lower
maintenance costs
• Monitoring functions for maximum pressure limits safeguard the
irrigation distribution circuit against pipe damage, as well as
automatic shutdown and restart under dry run and under voltage
conditions
• Pre-assembled, ready-to-install rebuild kits including pump shaft,
impellers, chambers and all associated hardware provide for
consistent and timely repairs
• Corrosion resistant stainless steel construction and Tungsten
Carbide bearings ensure trouble-free performance, long life and
low maintenance costs even under harsh operating conditions
• Ample spacing between motor and pump shaft on 15-60 HP motors
allows for a seal change without removing the motor
• Cartridge shaft seal design is such that pump disassembly is not
required to change the seal
ME 2 CRE 32 - 3 - 2
Type
ME
35
Flow
m 3/hr
BP-Series
How to Specify
Model
CRE
# Pumps
2
Stages
3
Reduced Dia.
Stages
2
www.rainbird.com
Booster Systems
BP Series
Model Size and Power Rating
Operating Range
Flow Range 0 - 3,800 gpm, 0 - 863 m3/h, 0 - 240 l/s
Head Range 0 - 500 ft, 0 - 152 m
HP Range 1 - 50 hp per pump (300 hp total system, 6 pumps)
.8 - 37 kw per pump (224 kw total system, 6 pumps)
Water Temperature Range 32° - 176° F, 0° - 80° C
Maximum Working Pressure 232 psi, 16 bar
Number of
Pumps
Pump
Size
HP
Range
Manifold
Size
1
CR 3
CR 5
CR 8
CR 16
CR 32
CR 45
CR 64
CR 90
CR 3
CR 5
CR 8
CR 16
CR 16
CR 32
CR 45
CR 64
CR 90
CR 3
CR 5
CR 8
CR 8
CR 16
CR 16
CR 32
CR 45
CR 64
CR 90
1-3
1-5
1.5 - 7.5
5 - 15
5 - 25
7.5 - 30
7.5 - 40
15 - 50
1-3
1-5
1.5 - 7.5
5 - 15
5 - 15
5 - 25
7.5 - 30
7.5 - 40
15 - 50
1-3
1-5
1.5 - 7.5
1.5 - 7.5
5 - 15
5 - 15
5 - 25
7.5 - 30
7.5 - 40
15 - 50
1.25" NPT
1.25" NPT
1.5" NPT
2" NPT
2.5" NPT
3" NPT
4" NPT
4" NPT
2" NPT
2" NPT
2.5" NPT
4" ANSI
4" ANSI
4" ANSI
6" ANSI
6" ANSI
6" ANSI
2" NPT
2.5" NPT
3" NPT
3" NPT
4" ANSI
4" ANSI
6" ANSI
6" ANSI
8" ANSI
8" ANSI
Input Required: 50/60 Hz, 1 Phase 208/230 Volt, 3 Phase
208/230/460/575 Volt
2
Dimensions
• Width: 29.8" - 64.2" (11,7 - 25,3 cm)
• Height: 43.0" - 78.0" (16,9 - 30,7 cm)
• Depth: 11.8" - 59" (4,6 - 23,2 cm)
Models
• Unique model assigned to each order
3
H [m] H [ft]
550
150
BP Series
60 Hz
500
450
125
400
350
100
300
75
250
200
CR 90
CR 64
CR 45
CR 32
100
CR 16
25
150
CR 3
CR 5
CR 8
50
50
0
0
0
0
500
100
1000
200
1500
300
2000
400
2500
500
600
3000
700
3500
4000
Q [GPM]
800
900
Q [m3/h]
www.rainbird.com
36
Enclosures for Commercial Pump Stations
Primary Application
Rain Bird enclosures are used by irrigation professionals to mount
and protect pump stations and associated electronic controls. These
enclosures include vandal-resistant features and are available in
many configurations. Enclosures are manufactured in a variety of
materials including high quality stainless steel, marine-grade
aluminum and fiberglass.
Features
• High quality construction is the solution for adverse weather and
environmental problems. These enclosures maintain their integrity
even in hot, wet environments
• Rain Bird enclosures provide greater strength to protect against
vandalism. The smooth, natural finishes allow for easy removal of
graffiti
• Stainless steel enclosures are 85% stronger than carbon steel.
The rust proof brushed finish allows for easy removal of graffiti and
produces a chameleon effect — providing an unobtrusive quality
• Three-point locking mechanisms, flush mounted access handle,
dual locking system and heavy duty continuous hinges are used to
insure maximum security. Dual locking systems provide cam style
locks and provisions for a padlock
• Carriage bolted hinges enhance appearance and allow for easy
removal of doors for maintenance
• Door seal and continuous carriage drain channels ensure adverse
weather protection
• Louvers at the top and bottom of the enclosures provide cross-flow
ventilation. Filter screens deflect errant water spray and protect
against entry of dirt and insects
• Removable, pre-drilled backboard allows for easy installation of the
controller and related components
• These enclosures have passed the rigorous testing at Underwriters
Laboratories and have been certified to meet the NEMA 3R rating
• Optional electrical fans and heating units are available to assist
with controlling of pump station environments within the enclosure
Pump Stations
37
www.rainbird.com
Spray Heads
Rotors
Valves
Controllers
Central Controls
Landscape Drip/
Xerigation
Install Confidence.
Install Rain Bird Landscape Drip.
™
™
®
®
Commercial
Pump Stations
Accessories
Resources
& Training
Easy Fit Below Grade Irrigation Stake
Primary Application
Primary Application
Easy Fit Compression Fittings are designed to work with a wide range
of polyethylene tubing sizes while significantly reducing the effort
required to insert the tubing into the fitting. Made of durable UV
resistant plastic, these fittings house a Buna rubber seal for long term
leak-free connections. These fittings eliminate the need to stock a
variety of fittings, as the Easy Fit Compression Fittings will fit all
standard tubing sizes from .630 to .710 (16-18 mm), saving time and
money during installation.
Features & Specifications
• Compression fit accepts all poly tubing from 0.630" to 0.710" OD
• Molded from UV resistant ABS Material with a Buna Rubber Seal
• Available in coupling, elbow and tee
• Unique design is patent pending
Operating Range
• Pressure: 0 to 60 psi (0 to 4,1 bar)
Models
• MDCFCOUP: Coupling
• MDCFEL: Elbow
• MDCFTEE: Tee
This proprietary stake is perfect for drip systems using polyethylene
tubing with poly-flex risers that need to be buried. It is a combination
of a stake, coupling and threaded adapter that can be used for a
variety of applications. The stake is designed to be buried below the
surface, and can accept a 1/2" riser or threaded adapter which can
work with virtually any drip emission device. This stake allows you
to keep most of the system out of sight, reducing vandalism and
required maintenance. With the incorporation of Rain Bird’s new
Easy Fit Compression Fitting, it can be used with any 1/2"
polyethylene tubing, and this flexibility results in faster, more cost
effective and easier installations which can be better adapted to
irregularly shaped areas.
• Manufactured using ABS material for long-lasting durability
• Compression fit accepts all poly tubing from 0.630" to .710" OD
• Top outlet has 1/2" NPT adapter, which accepts standard 1/2"
poly flex riser
• Unique design is patent pending
Operating Range
• Pressure: 0 to 60 psi (0 to 4,1 bar)
Models
• BIGIESTK
Model
Multi Diameter
Compression Fitting Tee
39
Model
Easy Fit Below Grade
Irrigation Stake
www.rainbird.com
How to Specify
BIGIE
How to Specify
MDCFTEE
BIGIESTK
Back Flush Filter and
Back Flush Filter and Control Zone Kits
Inline WYE Filter with Male x Male Threads
Primary Application
Primary Application
The new self-cleaning Back Flush Filter provides scrubbing action with
every cycle. This revolutionary filter has a pressure actuated piston
which flushes debris each time the system is turned on and off. With
virtually no maintenance, this filter protects your system and is ideal for
residential and city water applications. The Back Flush Filter can be
purchased separately or as part of a Control Zone Kit, which comes
complete with all of the components needed for a control zone.
• Filter provides self-cleaning action with every cycle, as debris is
flushed every time the system is turned on and off
• Filter contains 150 mesh filter element
• Kits available in 3/4", 1" or 3/4" anti-siphon versions
• Complete kits include valve, self-cleaning Back Flush Filter, duck bill
boot, pressure regulator, check valve and schedule 80 nipples
• Can be installed at or below grade in a standard valve box
Operating Range
• Flow:
- 3/4" kit: 2 to 5 GPM (0, 5 to 1,14 m 3/h; 0,13 to 0,32 l/s)
- 1" kit: 2 to 15 GPM (0,5 to 3,4 m 3/h; 0,13 to 0,95 l/s)
• Filtration: 150-mesh (100 micron)
Models
• XCZ075BFF (Back Flush Filter Control Zone Kit with 3/4" DV Valve)
• XCZ100BFF (Back Flush Filter Control Zone Kit with 1" DV Valve)
• XACZ75BFF (Back Flush Filter Control Zone Kit with 3/4"
Anti-Siphon Valve)
• BFF075 (3/4" Back Flush Filter only)
• BFF100 (1" Back Flush Filter only)
This inline filter for use in control zones on drip systems is now
available with M x M threads. The new threads allow easier
installation and eliminate the need for schedule 80 nipples in the
control zones, saving time and money on every system.
• Glass filled nylon construction provides 150 psi pressure rating
through MPT connections
• Replacement filter elements are available in three configurations:
200 mesh (75 micron), 150 mesh (100 micron) and 100 mesh (150
micron) models
• Cap has a sealing o-ring and unthreads to provide access to the
filter element for easy cleaning
Operating Range
• Flow: 0 to 30 GPM (0 to 6,81 m 3/h; 0 to 1,89 l/s)
Models
• RBY075MPTX (3/4" Inline Male x Male WYE Filter with
200 Mesh Screen)
• RBY075MPTB (3/4" Inline Male x Male WYE Filter with
200 Mesh Screen Bulk)
• RBY100MPTX (1" Inline Male x Male WYE Filter with
200 Mesh Screen)
• RBY100MPTB (1" Inline Male x Male WYE Filter with
200 Mesh Screen Bulk)
BFF 075
Back Flush Filter
WYE Filter
www.rainbird.com
How to Specify
Model
Back Flush Filter 3/4"
How to Specify
RBY MX
Model
Inline WYE Filter
with Male x Male
Threads
40
Black Stripe Tubing
Primary Application
Black Stripe Tubing is the latest tubing from Rain Bird for residential
and commercial drip systems. Produced with vibrant green, purple or
yellow stripes for easy zone identification, the colors add simplicity to
installation and maintenance. It is extruded from the finest quality, UV
resistant polyethylene for outstanding durability in the field.
Features
• Extruded from polyethylene resin materials for consistent durability
• Manufactured under strict ASTM test methods to ensure highest
quality
• UV resistant for installations at or below grade
• Available in 3 color stripes (green, yellow and purple) to
differentiate zones
• Compact coils for easy storage and shipping
• Compatible with Easy Fit Compression Fittings or standard 710
compression fittings
Models
• XBS 100: 100 foot coil with green striping
• XBS 100P: 100 foot coil with purple striping
• XBS 100Y: 100 foot coil with yellow striping
Specifications
• Outside diameter: 0.705" (18 mm)
• Inside diameter: 0.615" (15,6 mm)
• Available in 100', 500' and 1000' coils
Operating Range
• 0 to 60 psi (0 to 4,1 bar)
Model
Xeri Black Stripe Tubing
100 foot coil purple
striping
41
How to Specify
XBS 100P
Black Stripe Tubing
www.rainbird.com
Purple Landscape Dripline
Primary Application
Rain Bird’s Landscape Dripline now comes in purple for use with nonpotable water. This pressure-compensating, inline emitter tubing
delivers unmatched clog resistance for long-term reliability. It can be
used to irrigate ground cover, mixed plantings, slopes and hedgerows.
• Pressure compensation ensures consistent flow from each inline
emitter throughout the entire length of tubing run
• Sold in 1,000 foot coils with a choice of flow rates and spacing for
design flexibility
• Rain Bird’s patented ADI emitter (Advanced Drip Inline) pressure
compensates by lengthening the emitter’s turbulent flow path
instead of reducing the cross sectional area of the emitter’s
flow path
• Cylindrical shaped emitter welds to the inner circumference of the
polyethylene tubing, creating a physical barrier that keeps the
emitter cover and silicone wafer securely in place
• UV resistant purple color to identify non-potable water zones
Models
• LDP06121K: 6 GPH, 12" spacing, 1000 ft. coil
Operating Range
• Flow rate: 0.61 GPH and 0.92 GPH (2,3 l/h and 3,5 l/h)
• Pressure: 8 to 60 psi (0,6 to 4,1bar)
• Temperature: Up to 100° F (43.3° C) water; up to 125° F (51.7° C)
ambient
• Recommended Filtration: 120 mesh (125 micron)
Specifications
• Outside diameter: 0.630" (16 mm)
• Inside diameter: 0.540" (13,7 mm)
• Wall thickness: 0.045" (1,1 mm)
Purple Landscape Dripline
www.rainbird.com
How to Specify
LDP
Model
Purple Landscape
Dripline
42
Pressure-Compensating Modules with 10-32 threads
Primary Application
PC Drip Emitter Diffuser Cap
Primary Application
These higher flow, pressure-compensating emission devices (5-24
GPH), which are ideal for irrigating large shrubs and trees, are now
available with 10-32 threads for use on rigid risers or with 10-32
thread adapters.
These caps prevent wash out from high flow emitters, delivering
water to a targeted area for total control. They create a bubbler effect
with a 0-26" maximum throw and are designed for “finger-friendly”
quick installation.
• Rubber disc delivers uniform flow rate through a wide pressure
range
• Color-coded outlet barb for easy identification of flow rate
• Housing constructed of durable, UV-resistant plastic
• Available in 5, 7, 10, 12, 18 and 24 gallons per hour
• Cap snaps onto PC Drip Emitters and PC Modules for a secure fit
• Cap diffuses water into a targeted area for total control
• Maximum throw: 0-26" (based on model and gph of emitter)
• Made of UV-resistant polyethylene material
Operating Range
• Flow: 5-24 GPH (18,95 to 90,96 l/h)
• Recommended Filtration: 100-mesh (150-micron)
Models
• PC Diffuser
Models
• PC 05 10-32: light brown, 5 GPH (18,95 l/h)
• PC 07 10-32: violet, 7 GPH (26,53 l/h)
• PC 10 10-32: green, 10 GPH (37,90 l/h)
• PC 12 10-32: dark brown, 12 GPH (45,48 l/h)
• PC 18 10-32: white, 18 GPH (68,22 l/h)
• PC 24 10-32: orange, 24 GPH (90,96 l/h)
PC Modules with 10-32 Threads
43
PC-Diffuser Caps
www.rainbird.com
Spray Heads
Rotors
Valves
™
™
®
®
Controllers
Install Confidence.
Install Rain Bird Accessories.
Central Controls
Commercial
Pump Stations
Landscape Drip/
Xerigation
Accessories
Accessories
Resources
& Training
Accessories
IS Series
Rain Bird® Irrigation Supplement
Primary Application
Rain Bird Irrigation Supplement is water bound in the form of a solid
gel. It is an ideal irrigation supplement for use in establishing native
plant material where permanent irrigation is not required as well as
new plant material in existing landscape areas. Rain Bird IS increases
survival rates of transplants by providing continuous moisture needed
to reduce the stress of relocation.
General Use Guide
• The recommended
number of quarts is
based on the needs
of medium water-use
plant material. For
high water-use plants,
multiply this
recommended number
of units by 1.5.
• Excessive heat, wind,
plants with extensive
foliage or plants
bearing fruit will
require additional
watering.
Features
• Helps new transplants become established in existing landscapes.
Existing vegetation is not subjected to over-watering while trying to
establish the new plant, and the new plant has its own additional
source of water until it becomes established
• Provides moisture around the clock to the root zone where capillary
activity in the soil carries and maintains moisture throughout the
root zone
• 100% all natural, non-toxic and harmless to people and pets. Not a
synthetic polymer
• Provides water to the plant, instead of competing with the plant for
water like polymers
• Available in degradable paper carton with non-toxic, water-based
inks that meet landfill requirements
• Establish healthier trees and shrubs by minimizing transplant stress
• Eliminates evaporation, runoff and leaching
• Requires little to no maintenance
• Now also available in smaller 30-Day Gel Packs
45
5-gallon
10-gallon
15-gallon
24" B&B
32" B&B
40" B&B
48" B&B
Plant
6-8"
1'
2'
3'
4'
5'
6'
7'
8'
9'
10'
11'
12'
14'
16'
17'
18'
2
2-3
3-4
4–6
5–7
6–8
7–9
8 – 10
9 – 11
11 – 13
12 – 14
13 - 15
14 – 16
18 – 20
23 – 25
26 – 28
29 - 31
Models
• IS-QT: Quart carton
• IS-TG: Tube & Gel Pack
• IS-GP: Gel Packs
• IS-GP30: 30-Day Gel Packs
Optional Features
• IS-QT-SL: Polyethylene
sleeve for IS-QT
IS - QT
IS-QT
How to Specify
Model
IS
Seedlings
1-gallon
Height
(Quarts)
Dimensions
• IS-QT Quart Carton – Width: 2 7/8", Height: 9", Depth: 2 7/8"
• IS-TG Tube & Gel Pack – Diameter: 3 7/16", Length: 9",
Cap: 3 1/2"
• Disperses water at a consistent rate for up to 90 days. Bacteria
naturally found in soil gradually break down the food grade
ingredients and convert Rain Bird IS back into liquid water at a
consistent and steady release rate. The rate at which the product
liquefies varies based on several factors, resulting in a usage life
that could be shorter than 90 days. Users are advised to check the
product package within 45 - 60 days.
Style
QT: Quart
TG: Tube & Gel Pack
GP: Gel Pack
GP30: 30-Day Gel Packs
Container
Size
Accessories
IS-TG
www.rainbird.com
Accessories
WRS Series – Wireless Rain Sensor
Primary Application
The WRS Wireless Rain Sensor conserves water by disabling a 24VAC
sprinkler system when rain is detected. A rain collector unit senses
rainfall and sends a signal wirelessly to the receiver unit which is
connected to an irrigation controller. This eliminates the need to
run wires from the rain collector back to the controller. The durable,
rugged system is easy to install and test, making it ideal for both
commercial and residential applications. The superior range of the
wireless signal enables attractive, simple installations.
Features
• 500 foot (150 m) line-of-sight range*
• Multiple rainfall settings from 1/8" to 3/4" (5-20 mm) are quick and
easy to adjust with just the twist of a dial
• Easy to program transmitters to work with multiple receivers
• Up to 5 transmitters can be programmed per receiver
• Low power test mode allows a single installer to validate
installation
• Weatherproof receiver can withstand outdoor installation
• Bypass switch allows manual over-ride
• Rugged, easy to mount aluminum bracket and arm extend 6"
(15,2 cm)
• Comprehensive status monitoring displays the sensor state
(Watering Suspended; Low Battery; No Signal) or mode (Sensor
Bypass; Test Mode; Program Mode)
• Replaceable, long life batteries in the transmitter
• Loss of signal indication when two consecutive hourly
transmissions are missed
• Interchangeable and programmable receiver/transmitter pairs
• Compatible with virtually all 24VAC controllers (normally open
or normally closed)
• FCC approved
• Three-year warranty
Product Specifications
Transmitter
Size: 3 x 2 x 9 inches (7,6 x 5,0 x 23,0 cm)
Batteries: 2 ea. #CR2032
Wireless frequency: 433.92 MHz
Receiver
Size: 2 3/4 x 1 1/2 x 9 inches (7,0 x 3,8 x 23,0 cm)
Operational voltage: 20VAC – 28VAC
Models
WRC:
Wireless Rain Sensor Combo
(Transmitter and Receiver)
WRT:
Wireless Rain Sensor Transmitter
WSR:
Wireless Rain Sensor Receiver
WRFC: Wireless Rain and Freeze Sensor Combo
WRFT: Wireless Rain and Freeze Sensor Transmitter
WRC
How to Specify
WRC
* Wireless devices using radio frequency communications are affected by
location specific conditions. The reported distance is based on ideal line-of-sight
testing. Actual range may vary due to atmospheric conditions, terrain or other
forms of interference.
www.rainbird.com
Accessories
Model
Wireless Rain Sensor
Combo
46
Accessories
Basic Digital Multimeter
Auto Ranging Multimeter
TI-DM200
TI-DM400
Primary Application
Primary Application
The basic digital multimeter is used to troubleshoot automated
irrigation control systems, test valve solenoids, locate broken wires
and identify other electrical problems in irrigation systems.
This test instrument comes with an Irrigation Troubleshooting Guide,
a valuable reference for irrigation professionals.
Features
• Includes Irrigation Troubleshooting Guide
• AC and DC voltage measurement
• Resistance measurement
• 1.5 volt and 9 volt battery test
• Overload protection
• UL listed
• Built-in stand
• One-year warranty
The TI-DM400 is a sophisticated autoranging digital multimeter
used to troubleshoot automated irrigation control systems, test
valve solenoids, locate broken wires and identify other electrical
problems in irrigation systems. This high quality tool has a special
non-contact voltage sensor feature that enables it to check quickly
for voltage without connecting the leads. Comes standard with a
rugged, easy-to-grip rubber impact boot. This test instrument comes
with an Irrigation Troubleshooting Guide, a valuable reference for
irrigation professionals.
Features
• Non-contact voltage detection
• Autoranging AC and DC voltage measurement
• Autoranging resistance measurement
• AC and DC current measurement
• Continuity test
• Recessed safety-designed input terminals
• Rugged rubber impact boot
• Data hold
• Overload protection
• UL listed
• Built-in stand
Specifications
• DC Voltage: 0-2/20/200/600VDC
• AC Voltage: 0-200/600VAC
• Resistance: 0-200/2K/20K/200K/20MΩ
• Continuity Test: Sounds at <50Ω
• Power Supply: One 9 volt battery
Model
• TI-DM200
Specifications
• DC Voltage: 0-200mV/2/20/200/600VDC
• AC Voltage: 0-2/20/200/600VAC
• DC Current: 0-2m/200mA/10ADC
• AC Current: 0-2m/200mA/10AAC
• Resistance: 0-200/2K/20K/200K/2000K/20MΩ
• Diode Test Continuity: Sounds at <1KΩ
Model
• TI-DM400
TM-DM200
47
Accessories
TM-DM400
www.rainbird.com
Accessories
Digital Clamp Meter
Tone and Probe Kit
TI-DSA500
TI-TPK
Primary Application
Clamp volt-amp meter provides current reading by encircling a wire
with the snap-around probe. Allows measurements to be made without
disconnecting the field wiring. Ideal for troubleshooting both irrigation
and landscape lighting applications. Includes convenient nylon carrying
case. This test instrument comes with an Irrigation Troubleshooting
Guide, a valuable reference for irrigation professionals.
Features
• Snap-around clamp volt-amp meter
• Measures AC current, AC & DC voltage, resistance and continuity
• Electronic overload protection
• Shrouded transformer jaws for safety
• Data hold switch
• Continuity buzzer
• Sleep feature for extended battery life
• Nylon carrying case
• UL listed
Specifications
• DC Volts: 400/600V ± 1.5%
• AC Volts: 400/600V ± 2.0%
• AC Current: 40A/400A ± 2.0%
• Resistance: 400/4000Ω ± 2.0%
• Operating Environment: +32 °F to +105 °F (0 °C to +40 °C)
• Storage Environment: -4 °F to 140 °F (-20 °C to +60 °C)
• Power supply: Two 1.5 volt AAA batteries
Primary Application
Tone and Probe Kits are used to troubleshoot irrigation systems that
have broken station wire(s) and to locate a wire within a group of
wires. The Rain Bird TI-TPK Tone and Probe Kit has two components,
the Tone Generator Test Set and the Noise Resistant Speaker Probe.
Includes convenient nylon carrying case. This test instrument comes
with an Irrigation Troubleshooting Guide, a valuable reference for
irrigation professionals.
Features
• Noise resistant probe – selectable filter
• Multifunction selector switch
• Volume control
• Non-conductive pickup tip
• Tone generator with continuity test feature
• Nylon carrying case
Specifications
• Tone generator: 520-1100 Hz alternating tone
• Frequency identification
• Unfiltered: between 0 and 5000 Hz
• Filtered: tuned to a center frequency of 1000 Hz
• Power supply (probe): One 9 volt battery
• Power supply (tone generator) One 9 volt battery
Model
• TI-TPK
Model
• TI-DSA500
TI-DSA500
TI-TPK
www.rainbird.com
Accessories
48
Accessories
Wire Sorter
1 1/2" TSJ
TI-WS6
Primary Application
Primary Application
Designed by an irrigation contractor, this tool is used to identify which
field valve wire goes with which station on a controller. This is useful
when wires have been spliced in the field and as a result are not the
same color at both ends. Allows sorting up to six field wires at a time.
This test instrument comes with an Irrigation Troubleshooting Guide, a
valuable reference for irrigation professionals.
The TSJ family product line has expanded to include the 1 1/2"
inlet/outlet size. This new model also incorporates the double o-ring
seals and the innovative swept elbow design that reduces pressures
losses by 40%. Please refer to page 231 of the 2003-2004 Catalog
for the complete description.
Specifications
• Operating Environment: +14 °F to +120 °F (-10 °C to +50 °C)
• Storage Environment: -4 °F to +140 °F (-20 °C to +60 °C)
Features
TSJ Series - 11/2" Swing Joints
• Double o-ring protection seals water in and seals dirt out, ensuring
joints are kept clean and can be repositioned more easily
• Larger cross-sectioned area of each elbow and innovative swept
elbow design reduces pressure loss by 40% over other swing joints
• Excellent structural integrity from the swept elbow design reduces
the costs associated with fatigue-related failures
• 3 rotating joints of modified stub ACME threads for free rotation
• Threaded inlets have bigger grips making hand tightening and blind
installations (under water) easier
Model
• TI-WS6
Operating Range
• Pressure Rating: 315 psi (21,7 Bars) @ 73ºF (22.8ºC)
Features
• Six unique jumper wires to attach to the field wires
• Easy to understand LED indicators on sorter tool
Models
• TSJ-12-150: 12" (31 cm) long, 11/2" NPT inlet and outlet
RWS Sand Sock
TI-WS6
Primary Application
The RWS Sand Sock is a product line extension of the Root Watering
System product family. It is designed to fit on the outside of any
standard RWS unit. The RWS Sand Sock is for use in sandy soil
installations and will deter fine soil from infiltrating into the RWS
basket weave canister. Please refer to page 228 of the 2003-2004
Catalog for the complete description.
RWS Sand Sock
Models
RWS-SOCK: A 36" (91,4 cm) long “sand sock” made from
polypropylene landscape fabric.
TSJ Series
49
Accessories
www.rainbird.com
Spray Heads
Rotors
Resources and Training
Valves
Controllers
Central Controls
Commercial
Pump Stations
Landscape Drip/
Xerigation
Accessories
Resources
& Training
Rain Bird Irrigation Training
Rain Bird® Pro Software 3.0 Upgrade
Features and Benefits
Rain Bird Pro - New Version 4.6
Personal Data Assistant (PDA) Device
• Compatible with Pocket PC and Palm hand held devices to use in
the field.
• Work order recap showing time and materials with total costs on
the PDA device.
• Parts on the PDA are categorized with itemized drop-down lists for
each category.
• PDA message flags notify technicians to view message prior to
beginning work.
• Create and print invoices in the field using infrared portable
printers.
• Quick field data entry using canned field remarks selected as
needed per work order.
• Daily vehicle mileage information available to manage maintenance
schedules.
Office
• Rain Bird Pro can be simultaneously used by up to 10 computers at
once without additional licenses or costs.
• Use Windows to automatically back up Rain Bird Pro, keeping your
data available and safe.
• Rain Bird Pro now offers multiple billing options to accommodate
varying user billing needs.
• Update daily time card payroll information directly to Quickbooks,
eliminating double data entry and improving office efficiency.
• Larger customer notes area to record and track additional
information about contacts with daily automatic pop-up reminders.
• Customer accounts receivable information is readily displayed on
the scheduling screen when using QuickBooks, AccPac or Simply
Accounting software.
• Able to create canned office comments that can be used to speed
scheduling and reduce time on the phone.
• New easier way to track and control work orders by merging
multiple days work into one work order.
• Train your staff at your convenience through live interactive support
on the web.
51
Irrigation Training Camp – 16 hours
Basic Irrigation Training and Troubleshooting for Public Agencies,
Contractors and Distributor Personnel. This program is tailored to
meet your needs to get an entry level personnel up to speed fast and
provide several refresher tips for more experienced professionals.
You will experience various field installation techniques and get tips
from irrigation industry instructors. You will learn how to troubleshoot
an irrigation system and related problems such as wire faults, spray
heads and valves and programming controllers. This course is
offered in English and Spanish.
Topics Covered
• Electrical Troubleshooting
Even the most challenging electrical programs won’t hold you back
after this! Packed full of practical insights, the procedures and
advice covers everything from electrical basics to using a digital
multimeter to troubleshooting in the field. You’ll learn the best
methods of efficiently testing and isolating wire faults, bad
solenoids and controller problems.
• Controller Programming and Troubleshooting
How can you be sure each controller is operating at its peak?
Discover everything you need to know about the basics of
programming and troubleshooting your controller.
• Spray Head, Rotor and Valve Troubleshooting
This practical, hands-on class is a must for maximizing the day to
day efficiency and long-term reliability of your customers systems.
You’ll learn the most effective ways to troubleshoot spray heads,
rotors and impacts and begin with a thorough examination of
valve operations.
• Wire Tracing
With the right tools and little experience, troubleshooting electrical
problems in today’s automatic irrigation systems does not have to
be frustrating or even time-consuming challenge. Successful
troubleshooting begins by knowing what tools are available and
how to most effectively use them to locate components and
potential problems.
www.rainbird.com
• Ground Fault Locating
Protect your irrigation equipment from damaging electrical harm.
This class shows you how to apply fundamental theories in
grounding controllers and provide surge protection to protect
entire irrigation systems from damage.
Irrigation Contractor Course – 16 hours
This course deals directly with the issue of wise water management.
Students will learn how to perform field tests on irrigation systems to
determine their efficiency, and how to combine plant water use, soils
and local weather data to calculate accurate water schedules for
irrigation systems. Also you will review advanced soil-water-plant
relationships, advanced hydraulics, pumps, job safety requirements,
national codes affecting our industry, scheduling, water conservation,
and system uniformity and efficiency details. This class is designed
to refresh irrigation contractor skills; may also serve as good review
for the Irrigation Association CIC exam.
• Basic Hydraulics and Design
Make sure each irrigation system you design is technically
accurate and professionally planned to deliver peak performance.
Professionals walk you through step by step methods of the
irrigation design process, from basic hydraulics to calculating
system requirements. You’ll learn techniques for sprinkler layout,
calculating precipitation rates and irrigation scheduling.
Design Training Camp – 8 hours
The key to the popularity and success of this course is its "practice
what you learn" approach. Gain and reinforce the following concepts:
• Hydraulics
• Determining irrigation requirements
• Selecting sprinklers and spacing ranges
• Locating valves, proper layout of valve groups and sizing pipe and
valves
• Calculating system pressure requirements
• Site location of controllers
• Preparing the final irrigation plan
Throughout the day, there is the opportunity to perform practical
exercises in all areas.
Low Volume/Xerigation – 8 hours
This class provides hands-on practice and insights from professionals
on how to efficiently design and install an effective landscape drip
irrigation system that applies water directly to the plants’ root zones.
The ability to select the best products for a job, as well as properly
scheduling and maintaining the system will be covered. Attendees
will learn the four key elements of drip design: system layout, system
hydraulics, product selection and scheduling. Don't let drip irrigation
design confuse you; it can be a dynamic water saver and problem
solver. This class can make the difference!
Contract Writing – 4 hours
One way to show customers that your company is professional and is
a serious contender for their landscape and irrigation business is to
provide a clear and concise contract. A contract can be a binding
force that shows your customers that you are professionally oriented in
business operations and you will be around to honor your commitment.
This course will cover the basics of writing an irrigation contract. Items
that will be covered will include general pricing and warrantees. A basic
“Sample” contract will be provided to the student and each part will be
discussed.
Bidding and Estimating – 4 hours
Questions typically worrying contractors are how to price a job or what
to charge for a product. The question becomes increasing difficult to
answer when the product is service. This course will cover the basics of
bidding and estimating an irrigation or related job. Some of the items
that will be included are Customer Service, Marketing Strategies,
Pricing and Profits. Several industry standard-pricing methods will
be discussed.
www.rainbird.com
52
Spanish Phrases for English Speakers – 4 hours
Communication is key when working with sub-contractors and work
crews. The last thing you need is a language barrier when a job has to
be finished quickly and efficiently. This course will cover basic Spanish
phrases commonly used and needed in the Green Industry.
Intelligent Use of Water – 4 hours
Have you ever asked yourself, “How much water is enough?” The need
to conserve water has never been greater. Through experience and
case studies, we can make every drop count. This class will give you an
overview on how to use water intelligently in the following areas: Proper
soil types and structure, type of plants, water efficient irrigation
products, sensors and moisture equipment, assessing irrigation
systems, auditing and basic water scheduling.
Authorized Service Center Intermediate Level 2 – 16 hours
Take your knowledge of controllers and your repair skills to the next
level of sophistication with this intensive course. Training begins with
the basics of electronics theory and component identification, along with
how to read schematics and soldering techniques. You’ll focus on
electromechanical and solid-state controller repairs, from effective initial
testing to verify problems. At this time, this class is only offered to Rain
Bird Distributors.
Authorized Service Center Advanced Level 3 – 8 hours
Become one of the best in the field of controller repair with this course,
designed specifically for distributor controller repair technicians. This
class is ideal for anyone ready to study advanced solid-state controller
troubleshooting and circuit board-level repair. At this time, this class is
only offered to Rain Bird Distributors.
Certified Central Control Training Level 1 – 8 hours
Take control of your irrigation systems in record time. You’ll find out
everything you need to know to effectively set up and efficiently
operate a Nimbus/Stratus or Cirrus/Nimbus II/Stratus II for Windows
central control system. Experts will diagram the start-up, map import,
Flo-Manager and the best methods for setting up programs and
schedules.
Control your irrigation systems with greater precision than ever before.
This intensive class maximizes your knowledge to effectively set up the
Cirrus, Nimbus II, Stratus II for Windows central control system. An
experienced professional will walk you through key points in the start-up
process, ranging from effectively integrating Flo-Manager and databases
to importing and establishing maps. The class will also cover
troubleshooting techniques, AutoCAD map conversions and
incorporation of “smart” features into programs and schedules.
This course is designed to support the growth and development of the
most advanced users. This level will allow users the means to capitalize
on the full capacity and capability of their irrigation control systems as
well as integration of their pump station, weather station and other
control-driven devices.
Central Control Hardware Level 1
Basic Installer Training is the beginning step for the contractor engaged
in the business of central control irrigation system installation. This
training will introduce and define the role of the system hardware
components. Hands-on installation activities with the central controller,
Site SAT, Cluster Control Unit, Satellite and flow sensors are included.
The participant should have a prior working knowledge of the landscape
irrigation system including sprinkler, valve and controller installation.
Central Control Software Level 1
Basic Operator Training is the second step for the person responsible
for central control system programming, monitoring and reporting. This
training will introduce the participant to the software and it’s primary
functions related to basic irrigation operation, monitoring, programming
and reporting only. Scheduling complexity will be equal to that of a
stand-alone irrigation controller program. This course requires that the
attendee have a working knowledge of Windows 98/2000.
53
www.rainbird.com
Intermediate Installer Training is the second step for the contractor
engaged in the business of central control irrigation system installation.
This training will include high level hands-on installation activities with
all components in the Basic Installer Training with the addition of the
weather station, site rain can, anemometer and the Freedom System.
CAD details and issues related to code compliance are included. To
attend, participants should have a current certificate of completion of
the Central Control Hardware Level 1 training class.
Intermediate Operator Training is designed for the person responsible
for central control system programming, monitoring and reporting. This
training will cover ET based irrigation scheduling, “Flow Manager”,
“Flow Watch”, “Rain Watch” and “Wind Watch” programming. Freedom
System operation is included. Scheduling complexity will address
sophisticated mainline networks and issues related to excessive flow
detection, rainfall and wind response. This course requires that the
participant have a current certificate of completion of the Central Control
Software Level 1 training class.
Advanced Installer Training is the third step for the contractor engaged in
the business of central control irrigation system installation. This training
will include our highest level of hands-on installation activities with all
central control components including the items from all prior levels as
well as Site Survey equipment, Spread Spectrum modems and pump
station integration with the central control system. Additionally, the
training will address earth ground testing, wire tracking, coax/cable
splicing, maintenance and troubleshooting. To attend, participants should
have a current certificate of completion of the Central Control Hardware
Level 1 and 2 training class.
Water Manager Training is designed for the person engaged in the
business of irrigation system management and monitoring. This training
covers advanced programming, monitoring and reporting functions
common to the business of irrigation water management. This training
will involve discussions of soil, plant and water relationships and
advanced ET based irrigation scheduling. Exercises will deal with
programming for a water shortage, flow monitoring and reporting,
reaction to environment and atmospheric input and course requires
that the participant have a current certificate of completion of the
Central Control Software Level 1 and 2 training class.
MDC Decoder System and IM Controller – 14 hours
• MDC Decoder
Learn proper hands-on installation, troubleshooting and programming
skills. Installation includes proper wiring, splicing and system
configuration. Attendees will be taught how to use a clamp meter
to perform proper troubleshooting methods. Learn to program the
controller and software.
• IM Controller
Learn to manage your water with this advanced stand-alone
controller. This course will cover proper ET and water budget
programming along with the use of sensors.
For a class schedule go to:
www.rainbird.com/landscape/training/index.htm
www.rainbird.com
54
USA
International
Rain Bird Corporation
Contractor, Landscape Drip
and Accessories Divisions
970 W. Sierra Madre
Azusa, CA 91702
USA
Phone: (626) 812 3400
Fax: (626) 812 3411
Regional Offices
Commercial Division
6991 E. Southpoint Rd., Bldg. #1
Tucson, AZ 85706
USA
Phone: (520) 741 6100
Fax: (520) 741 6146
Distribution Division
970 W. Sierra Madre
Azusa, CA 91702
USA
Phone: (626) 812 3430
Fax: (626) 812 3618
Rain Bird in Japan/Korea
Monodecor Shakujiikoen 102
3-3-31 Shakujii Nerima
Tokyo 177-0041
Japan
Phone: 81 3 5372 1656
Fax: 81 3 5372 1658
Rain Bird in China
Room 415, Yuan Chen Xin Office Building
E1 No. 12 Yumin Road
Chaoyang District
Beijing 100029
Peoples Republic of China
Phone: (86) 10 8225 1759
Fax: (86) 10 8225 1301
Customer Support Center
6640 S. Bonney Avenue
Tucson, AZ 85706
USA
Phone: (520) 434 6200
Fax: (520) 434 6289
Offices
Rain Bird Europe S.A.R.L.
B.P. 72000 - 900 rue Ampére
13792 Aix-en-Provence CEDEX 3
France
Phone: (33) 4 42 24 44 61
Fax: (33) 4 42 24 24 72
Rain Bird Brasil, Ltda.
Rua Piaui, 740
Bairro Marta Helena
CEP 38402020
Uberlandia-MG, Brazil
Phone: (55) 34 3 212 8484
Fax: (55) 34 3 212 5469
Rain Bird Australia Pty. Ltd.
10 Mareno Road
Tullamarine
Victoria 3043
Australia
Phone: (61) 3 9338 1911
Fax: (61) 3 9338 1699
Rain Bird Mexico S. de R.L. de C.V.
Calzada Juan Gil Preciado, Carret. a
Tesistan
#2450, Col. El Tigre, Parque Ind. Ecopark
#15A
Zapopan, Jalisco, C.P. 45200
Phone: 01 333 364 4785
Fax: 01 333 364 4787
Toll free (Tel. sin costo) 01 800 00 REGAR
Rain Bird Technical Service
Phone: (800) BIRDSVC
(800) 247 3782 (USA & Canada only)
Rain Bird Spec Hotline
Phone: (800) 458 3005
(USA & Canada only)
Rain Bird International, Inc.
145 North Grand Avenue
Glendora, CA 91741
USA
Phone: (626) 963 9311
Fax: (626) 963 4287
The Intelligent Use of Water.™—Visit www.rainbird.com
to learn more about our efforts.
® Registered trademark of Rain Bird Corporation
© 2003 Rain Bird Corporation 10/03
D37200D

Install Confidence.™ Install Rain Bird.

Transcription

Similar documents

Bankless Channel

Weather - Addison Public Library

rc240 - IDS OpenDocs - Institute of Development Studies

See it. Love it. Do it.

First choice for high efficiency abrasive slurry pumping

Choosing a pump

DANA Diabecare R Remote System

Bird Care - Rolf C. Hagen Inc.

Selected Poems - ScholarWorks

Product Catalog

Product Spec Sheet

Examples of Low Cost and High Benefit Improvements to a WTE Air

Rain Bird Catalog - PJ Pappas Company, Inc

PDF - Haydon Corporation

click here to the PDF file.

splinting avian fractures

Hyacinth Macaw (Anodorhynchus hyacinthinus) Breeding and Hand

How to Make it Rain: A Practical Analysis of Storytelling Forms

Comprehensive Water Heating