Quik Drive™ and - Simpson Strong-Tie

Transcription

Quik Drive™ and
Stainless Steel
Fixings
Applications include:
Decking
Cladding
Drywall
Flooring
Ceilings
Truck Beds
Marine Installations
Oak Framing
Modular Housing
C-FIXINGS-13
+44 (0) 1827 255 600
www.strongtie.co.uk
Quik Drive
®
Fast
Simple
Reliable
Quik Drive® from Simpson Strong-Tie is the World’s most advanced autofeed screw system. It significantly
reduces the time and effort required when fixing ceilings, floors, decking and mezzanine floors using screws.
The system is compatible with all leading screw guns and offers speedy, easy to load and jam-free
operation using our unique collated screw clips. The unique extension fitting delivers the screws to
floors and ceilings from a normal standing position, and that means a lot less wear and tear to your
knees and back!
Quik Drive and Stainless Steel Fixings
CONTENTS
Collated Tools and Attachments
Pages 7-20
Accessories
Full list of Accessories
20
Adaptors
Adaptor Compatibility by Gun Manufacturer
16
Bits
Correct Bits by Drive Type
19
QD76KE
Multi-purpose: Drywall, Flooring, Decking - includes Extension
QDHSD60E
Mezzanine Floor and Trailer Fastening System
13
QDHSD75E
Mezzanine Floor and Trailer Fastening System
13
QDSPA76E
Replacement QD76 Attachment Only
10
QDPRO51E
Drywall Fastening System
8
QDPRO51KE
Drywall Fastening System - includes Extension
8
QDPRO64E
Flooring and Deck Fastening System
9
QDPRO64KE
Flooring and Deck Fastening System - includes Extension
9
QDPROPHE
Metal Frame Fastening System
14
QDPRO76SKE
Hardwood and Softwood Decking - includes Extension
12
10-11
Pages 23-33
Collated Screws
Applications
Full list of Applications and Tool Compatibilty
21
BHSD
Bugle Head Self Drilling
33
CBSD
Cement Board Self Drilling
33
DWC
Dry Wall Coarse
26
DWF
Dry Wall Fine
27
DWFSD
Dry Wall Fine Self Drilling
27
DTHQ / LDST
Decking Trim Head Quik Guard™: Collated and Loose Options
29
FHSD
Wood to Steel Flat Head Self Drilling
31
MTH
Modified Trim Head
33
PHSD
Steel to Steel Pan Head Self Drilling
32
PPSD
Wood to Steel Pilot Point Self Drilling
32
RDWF
Reverse Dry Wall Fine
27
Self Drilling Screws
How They Work
21
SSDHSD
Hardwood to Hardwood Decking Screw
30
SSDTH
Stainless Steel Deck Trim Head
30
SSWSCB
Stainless Wood Screw Coarse Bugle Head
30
TB
Wood to Steel Truck Bed
31
TBG
Wood to Steel Truck Bed Galvanised
31
WSC
Wood Screw Coarse
28
WSNTL
Wood Screw Nibs Twin Lead
28
WSNTLG
Wood Screw Nibs Twin Lead Galvanised
28
Trouble Shooting and Terminology
Pages 18-19
How the Quik Drive Tables Work
Pages 25
Quik Drive Coatings and Finishes
Page 25
Quik Drive General and Safety Information
Pages 44-45
Stainless Steel Screws and Nails
Pages 34-43
3
CE Marking and Quality
Simpson’s Quality Policy
We help people build safer structures economically. We do this by designing, engineering and manufacturing “No Equal” structural
connectors and other related products that meet or exceed our customers’ needs and expectations.
Everyone is responsible for product quality and is committed to ensuring the effectiveness of the Quality Management System.
Terry Kingsfather
129-150
President
0
Testing Laboratory Accreditation
Our European Test Laboratory located in Tamworth, Staffordshire is the first manufacturer’s facility to
achieve third party accreditation to the international standard BS EN ISO/IEC 17025.
4 0 24
Quality Management: ISO9001:2008
Simpson Strong-Tie is an ISO 9001 registered company.
ISO 9001 is an internationally-recognised quality management system standard, which lets our
customers know that they can count on the consistent quality of Simpson Strong-Tie’s products
and services.
ISO9001
FM14704
The Environment: ISO14001, Health and Safety: BS 18001
Simpson Strong-Tie UK designs, manufactures and distributes pressed steel products for the
construction industry. It recognises that its processes and products do impact on the environment
and so is committed to minimise this impact through the following measures:
•
Comply with applicable legislation, industry codes of practice and other requirements.
•
Avoiding, controlling or reducing pollution resulting from its operations.
•
Take account of the concerns of interested parties such as regulators, shareholders, employees
and the public.
•
ISO14001
EMS517722
Set objectives to drive continual improvement programmes and regularly review performance to
evaluate effectiveness.
•
Ensure that all persons working for or on behalf of the branch are aware of this policy and are
trained in their responsibilities.
•
Minimise the risk and protect our associates and the communities in which we operate by utilising
safe technologies and operating procedures.
•
Employ management systems and procedures specifically designed to prevent activities and
conditions that pose a threat to health, safety or the environment.
•
Ensure our suppliers adhere to basic workplace standards, comply with applicable laws and
regulations and operate in a socially and environmentally responsible manner.
4
BS18001
OHS57006
3 Year Warranty
Our collated screw systems are designed and built
to last, with all moving components factory coated
with Teflon®, they’ll give the building professional
years of reliable use, in all manner of environments.
To prove our confidence and give you peace of
mind, we offer a free 3 year warranty. To register
your Quik Drive® tool kit, simply complete and return
the registration card included with it.
5
Quik
Drive
Stainless
Steel Fixings
Collated
andand
Corrosion
Resistant
Fastenings
TOOLS
APPLICATIONS
Quik Drive®
Auto-Feed Systems
increase productivity
while providing
superior fastener
performance
• Fast, jam free operation
• Re-usable screw clips
• Extension allows access to floors
and ceilings without crouching,
bending or over-stretching
• Wide range of applications from
Decking to Drywall
• Moving components factory
coated with Teflon®
• Three Year Warranty
6
Catalogue C-FIXINGS-13 © 2013 SIMPSON STRONG-TIE ®
TOOLS
QDPRO51E
Page 8
QDPRO51KE
Drywall Fastening
QD76PROSKE
Hardwood and
Softwood Decking
QDHSD60E
QDPRO64E
Page 9
QDPRO64KE
Flooring and Decking
QD76KE
Page 10
Multi-purpose: Drywall,
Flooring and Decking
QD76KEG
As above with Screw Gun
Page 12
Page 13
QDHSD75E
Engineered for Trailer and
Mezzanine Floor Fastening
QDPROHX6.4E
Metal Roofing with
Hex Drive Screws
QDPROPHE
Metal Roofing and
Cladding
Page 14
Page 14
7
TOOLS
QDPRO51 - Drywall Applications or Light Gauge Steel
2
1
1 Smooth nose will not mark drywall surface.
2 Self-locking depth adjustment for consistent countersink.
Applications: Drywall-Wood or Light Gauge Steel
•
•
•
•
Teflon® material, no lubricating required.
Possible 360o turn of the attachment on adaptor or extension.
Easy connection to screw gun or extension.
Mandrel 165E-RC
QDPRO51E
BHSD
Page 33
DWC
Page 26
DWF
Page 26
DWFSD
Page 26
MTH
Page 33
RDWF
Page 27
QDPRO51KE
3 x BIT2PE
1 x BIT2SE
1 x BIT3SUE
8
Suitable from 25mm up to 51mm
3 x BIT2PE
1 x BIT2SE
1 x BIT3SUE
TOOLS
QDPRO64 - Flooring and Decking Applications
2
1
1 Non-skid nose piece increases stability (not interchangeable).
2 Uniform toe-nailing and countersink on slick surfaces.
CBSD
Page 33
DTHQ
Page 29
PPSD
Page 32
SSDCL
Page 26
SSDTH
Page 30
SSWSCB
Page 30
WSC
Page 28
WSNTL
Page 28
WSNTLG
Page 28
Applications: Flooring and Decking
• Possible 360o turn of the attachment on adaptor or extension.
• Easy connection to screw gun or extension.
• Mandrel 191E-RC.
• Curved feeding guide for quick strip loading.
• Replaceable non-skid teeth for slick surfaces.
• Self-locking depth adjustment for consistent countersink.
QDPRO64E
QDPRO64KE
2 x BIT2SE
2 x BIT3SUE
2 x BIT2SE
2 x BIT3SUE
9
TOOLS
QD76KE - Multipurpose Drywall, Flooring and Decking Applications
51mm Nose Piece
Interchangeable nose pieces included:
51mm for 25mm to 51mm screws
76mm for 76mm screws only
64mm Nose Piece
76mm Nose Piece
Applications: Drywall, Flooring and Decking
•
•
•
•
•
Mandrel 191E-RC.
Self locking depth adjustment for consistent countersink
QD76KE
BHSD
Page 33
CBSD
Page 33
DTHQ
Page 29
DWC
Page 26
DWF
Page 26
DWFSD
Page 26
MTH
Page 33
PPSD
Page 32
RDWF
Page 27
SSDTH
Page 30
SSWSCB
Page 30
WSC
Page 28
WSNTL
Page 28
WSNTLG
page 28
QDSPA76E
2 x BIT2PE
1 x BIT3SE
1 x BIT2SE
1 x BIT2UE
1 x BIT3SUE
10
Replacement attachment only.
TOOLS
QD76KEG - Multipurpose Drywall, Flooring and Decking Applications
Interchangeable nose pieces included:
76mm for 76mm screws only
BHSD
Page 33
CBSD
Page 33
DTHQ
Page 29
DWC
Page 26
DWF
Page 26
DWFSD
Page 26
MTH
Page 33
PPSD
Page 32
RDWF
Page 27
SSDTH
Page 30
SSWSCB
Page 30
WSC
Page 28
WSNTL
Page 28
WSNTLG
Page 28
All of the features and equipment available as part of QD76KE,
also including a Screw Gun and Aluminium adaptor
(adaptor reference AMA9E-RC).
Choice of 110v or 240v Screw Gun.
Applications: Drywall Flooring and Decking
•
•
•
•
•
Mandrel 191E-RC.
Self locking depth adjustment for consistent countersink.
QD76KEG
2 x BIT2PE
1 x BIT3SE
1 x BIT2SE
1 x BIT2UE
1 x BIT3SUE
Makita is a registered trademark Makita Corporation.
11
TOOLS
QDPRO76SKE - Hardwood to Hardwood and Softwood Decking Applications
Applications: Hardwood to Hardwood
and Softwood Decking
• Decking on decks and docks.
• Subfloor to wood or steel.
• Wall plates, stair treads, sheathing.
• Fibre-cement siding to steel.
CBSD
Page 33
DTHQ
Page 29
SSDTH
Page 30
SSDHSD
Page 30
WSNTL
Page 28
WSNTLG
page 28
QDPRO76SKE
12
TOOLS
QDHSD - Trailer, Truckbed and Mezzanine Floor Applications
QDHSD60E (suitable for use with 45mm to 60mm screws)
TB
Page 31
TBG
Page 31
FHSD
Page 31
QDHSD75E (suitable for use with 60mm to 75mm screws)
Applications: Trailer, Truckbed and Mezzanine Floors
• Teflon® material, no lubricating required.
• Possible 360o turn of the attachment on
adaptor or extension.
• Self locking depth adjustment for consistent countersink.
• Broad nose increases stability.
QDHSD
+
3 x BIT3SE
Extension sold seperately. Not available in kit form at
time of print.
13
TOOLS
QDPROPHE - For Metal Roofing and Cladding Applications
Available in 19mm only.
PHSD
Page 32
Applications: Metal Roofing and Cladding
• Possible 360o turn of the attachment on
adaptor or extension.
• Self locking depth adjustment.
3 x BIT2PE
1 x BIT2SE
+
Extension sold seperately.
14
Collated and Corrosion Resistant Fastenings
Fast Technical Support
For the best technical support and practical advice, contact our Technical
Support Team.
Call +44(0)1827 255600 or Fax +44(0)1827 255629 or
Email: [email protected]
For sales enquiries call:
01827 255600 or visit: www.strongtie.co.uk
15
ADAPTORS
Adaptor Selection By Screw Gun Manufacturer
BOSCH®
RPM
GSR 6-25
2,500
HITACHI®
WH18DL
WH18DMR
RPM
AHI1E-RC
2,600
ABO1E-RC
GSR 6-45
4,500
1,700
W8VB2
W6VB2
GSR 6-25
(after 2008)
GSR 6-40
(after 2008)
W8VB
2,500
W6VB3
AHIE-RC
2,600
W6VA3
ABOE-RC
GSR 12VET
(after 2008)
DEWALT®
4,500
W6VA4
2,000
W6V3
W6V4
W6VM
RPM
DW979K
2,300
3,000
AHIE-RC
HOLZHER®
3352
4,000
RPM
AHEE-RC
2,850
ADW1-RC
DC520N
2,900
HILTI®
SF4000
DW263K
RPM
AHT2E-RC
4.000
2,500
SF4000A
DW264K
4,000
2,000
ADWE-RC
DW274K
SD2500
AHT2E-RC
2,500
4,000
DW275K
SD5000
5,000
ST1800
1,800
5,300
AHTE-RC
DC827KL
ADW2E-RC
2,700
ST2500
16
AEG® is a trademark of AEG Electrowerkzenge, Bosch® is a trademark of Bosch Tool Corporation, Hilti® is a trademark of Hilti
Corporation, Berner® is a trademark of Berner International Corp., Fein is a trademark of C. & E. FEIN GmbH, Festool® is a trademark of FEIN GmbH, Hitachi® is a trademark of Hitachi Koki Co., LTD., Holzher® is a trademark of HOLZ-HER U.S. Inc, Metabo®
is a trademark of Metabowerke GmbH, Kress is a trademark of KRESS-elektrik GmbH & Co. KG, Milwaukee® is a trademark of
Milwaukee Electric Tool Corporation, Tools, Inc., DeWalt® is a trademark of DeWalt Industrial Tool, Co., Makita® is a trademark of
Makita Corporation, Spit® is a trademark of Illinois Tool Works Inc., Wurth® is a trademark of Adolf Würth GmbH & Co. KG.
2,500
ADAPTORS
Adaptor Selection By Screw Gun Manufacturer
MAKITA®
RPM
6823
6824
6825RK
6826
AMAE-RC
2,500
6842/43
AMA4E-RC
4,700 /
6,000
6807
AMA2E-RC
MAKITA®
BFS450RFE 18 V
AMA5E-RC
AMA8E-RC
FS2300K
2,500
AMA9E-RC
AMA6E-RC
SE2800
SE4000
AMA8E-RC
(o/m)
2,300
BFS440RFE
AME1E-RC
SE5025
MAKITA®
RPM
FS2300K
2,500
AMA9E-RC
FS6300RK
2,850
4,000
14,4 V & BFS450RFE 18 V
4,000
2,500
AMEE-RC
SE5040
4,000
MILWAUKEE®
RPM
TKSE2500 Q
2,500
6,000
AMIE-RC
DWSE4000 Q
4,000
FESTOOL®
RPM
RPM
HASTIGHED
AEG®
(o/m)
SE2500
2,500
C12 DUO
AMIE-RC
SE4000
RPM
HASTIGHED
METABO®
BTD130RFE
FS4300K
6,000
4,000
BTD140RFE
AMA7E-RC
4,000
2,500
FS6300RK
6821
4,000
2.200
FS4000K
6827
RPM
4,000
AFTE-RC
KRESS®
TBS650
1,500
RPM
AKR1E-RC
4,500
17
SYSTEM TERMINOLOGY
COMPONENTS
Attachment
Screw Gun (not included) *
Extension
Extension Shaft
Handle
* 110v or 240v screw guns are available on request
TOOL
Depth Adjustment Wheel
Nose Piece
Guide Tube
Nose
Locking Lever
Bit Release Key
Feed Pawl Lever
(Must be engaged in
feed pawl assembly slot)
Feed Pawl
Assembly
Bit Release Slot
Mandrel
Hex Mandrel (inside attachment)
Bit
18
TROUBLESHOOTING GUIDE
Fault Diagnosis
Quik Drive® tools are easy to use. As with any power tool, there are a few basic things to remember.
Symptom
Solution
Screws won’t drive. They spin for a second, then
lay over on their side. Providing little or no
penetration.
This is the most commonly reported issue. Make sure the screw gun
is not set to reverse, if it is, set to forward
(indicated by arrow located near screw gun trigger).
Screws won’t drive completely. They go down
about halfway then the bit spins out.
Check that you are using the correct bit for the type of screws being
driven. Check the bit for wear as it may need replacing with a new
one (a free bit is provided with every box of screws).
If you hear a “clacking” sound whilst driving screws, apply more
pressure.
Screws are almost completely driven but won’t
countersink fully.
Check the depth adjustment on the attachment, reset if necessary.
You may have missed the substrate (typically occurs in flooring applications if you miss the joist).
Screws don’t advance properly, causing the tool
to jam.
Ensure that the screw is strip is inserted correctly (pointed end first).
Engage screw gun trigger before nose piece makes contact with the
surface.
Lift the tool completely off the surface after driving each screw don’t drag screw strips along the work surface as you move along to
the next position.
Ensure the feed pawl lever is intact and the feed lever is engaged.
Correct Bit Use
Using the correct driving bit is necessary.
The free bit(s) included in each box of Quik Drive® screws should drive the entire box.
Variations in materials and driving technique can cause excessive wear so additional bit packs are available for
purchase. Reference the description on the bit sticker in your box of screws or the screw box label to ensure correct
selection. BIT2SUE and BIT3SUE undersized are suitable for use with galvanised screws..
Bits and Recess Drives
#2 Square Drive
BIT2SE
#2U Undersized
BIT2SUE
#3 Square Drive
BIT3SE
#3U Undersized
BIT3SUE
#2 Phillips
BIT2PE
19
ACCESSORIES
Description
Reference
Bit pack - 3 ea. #2 Phillips drive and wrench
BIT2PE-RC3
Bit pack - 3 ea. #2 square bit and wrench
BIT2SE-RC3
Bit pack - 3 ea. #2 undersized square bit and wrench
BIT2SUE-RC3
Bit pack - 3 ea. #3 square drive bit and wrench
BIT3SE-RC3
Bit pack - 3 ea. #3 undersized square bit and wrench
BIT3SUE-RC3
Bit pack - 10 ea. #2 Phillips drive bit
BIT2PE-RC10
Bit pack - 10 ea. #2 square drive bit
BIT2SE-RC10
Bit pack - 10 ea. #2 undersized square bit
BITSUE-RC10
Bit pack - 10 ea. #3 square drive bit
BIT3SE-RC10
Bit pack - 10 ea. #3 undersized square bit
BIT3SUE-RC10
Mandrel 165mm for QDPRO51 / QDPROPH
MANDREL165E-RC
Mandrel 191mm for QDPRO64 / QD76KE / QDHSD
MANDREL191E-RC
Nose Piece Alignment Aid for QD76KE
NPADECKAE-RC
Decking Nose Piece
DNPE
Extension - 51cm
QDEXTE
Extension Long - 57cm
QDEXTLE
Feed Pawl for QDPRO51 / QD76
PFEEDPAWLTLE
Feed Pawl for QDPRO64
PFEEDPAWLE
Feed Pawl for QDPROPH
PFEEDPAWL2E
Feed Pawl for QDHSD
PFEEDPAWL3E
Heavy Duty Case for kits
TOOLCASE-LGE
Spring for QD76KE
QDSPRING4E
Nose Clip for QDPRO64E
PNOSECLIPE
Replacement attachment for QD76KE (excludes nose pieces)
QDSPA76E
MANDREL
BIT PACK (availble in packs of 3 or 10)
ALIGNMENT AID
FEED PAWL
DECKING NOSE PIECE
(Note protrusion to ease
location into Decking
Groove)
QDEXTLE
TOOLCASE (LARGE)
20
APPLICATIONS
QD
DWC3525PE
Drywall
DWC3535PE
DWC3540PE
DWC3550PE
DWC3930PE
DWC3955PE
•
•
•
•
•
•
DWC3965PE
DWF3525PE
DWF32PE
DWF41PE
DWFSD32PE
DWFSD41PE
RDWF30BE
RDWF40BE
WSC32E
Flooring
WSC38E
WSNTL44E
WSNTL51E
•
•
•
•
•
•
•
•
•
•
•
WSNTL64E
O
PR
E
E
KE
/K
E
6 .4
E
SK
E
E/
4E
HX
PH
51
60
76
75
E
D
D
O
O6
O
O
K
S
S
R
R
R
R
H
H
P
P
P
P
76
GE
QD
QD
QD
QD
QD
QD
QD
PA
•
•
•
•
•
•
•
•
•
•
WSNTL76E
WSNTLG51E
•
WSNTLG64E
DTHQ51E
Deck/Dock
•
DTHQ64E
•
•
•
•
DTHQ76E
SSDTH51E
•
SSDTH64E
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
SSDHSD60E
•
SSWSCB64E
•
•
26
26
•
•
PPSD49E
•
•
•
TB645E
TB660E
26
26
26
26
26
26
27
27
28
28
28
28
28
28
28
28
Steel-to-Steel
TRSD19E1012
CBSDQ41E
Speciality
•
CBSDQ55E
BHSDZ41PE
MTH32E
MTHZ25E
•
•
•
•
•
•
•
•
•
•
•
●
●
●
●
●
●
●
●
29
30
30
•
•
30
30
30
30
•
31
32
•
•
31
•
•
31
31
31
•
31
•
•
PHSD19E
●
●
●
●
●
●
●
●
29
•
•
TBG645E
●
●
●
●
29
TB675E
TBG660E
ed
26
FHSD64E
Wood-to-Steel
r ov
26
•
•
•
•
•
•
•
•
SSDHSD50E
SSWSCB51E
26
26
CE
p
Ap
32
32
33
33
33
33
33
21
SELF DRILLING SCREWS
See pages 31 and 32 for products
which are self drilling.
HOW SELF-DRILLING SCREWS WORK
When selecting a self-drilling screw it is important to select a
suitable point for the material thickness. Three key things to be
aware of:
1. Drill Flute: The height of the flutes determines the material
thickness which the screw can penetrate. Since the
flutes remove debris during drilling, if they become completely
embedded in the material, debris will become trapped in the
flutes and cutting action will cease. This will cause the point
to heat up and break.
2. Point Length: The unthreaded portion of the point, known
as the pilot section, must be long enough to completely penetrate
the material before the threads engage. Since the
threads advance faster than the drilling process, if they engage
before drilling is done the fastener can bind and break.
3. Fastening Thicker Material to Metal: When fastening thicker
materials such as wood to metal, it is necessary to use a fastener
with “wings” on the shaft. The wings will enlarge the
hole in the fastened material so that the threads can pass
through without binding or damage. Once the wings contact
the metal they break away and the threads engage.
Head
Threads
Wings
Pilot Section
Flute
Point
Wing Reamer
Wings ream hole larger than threads so threads do not engage wood.
Wings then break off when they hit steel, then threads engage.
Screw Point Type
Screw Diameter
Material Thickness *
#2
3.5
4.2
4.8
0.9 - 2.5
0.9 - 2.5
0.9 - 2.8
#3
4.2
4.8
5.5
6.1
2.5 - 3.6
2.8 - 4.4
2.8 - 5.3
2.8 - 5.3
#4
5.5
6.1
4.4 - 5.6
4.4 - 5.6
* All dimensions in mm. Total thickness of steels including spacing between layers.
22
COLLATED SCREWS
DRYWALL SCREWS
Page 26
WOOD-TO-WOOD SCREWS
Page 28
HARDWOOD DECKING SCREWS
Page 30
WOOD-TO-STEEL SCREWS
Page 31
STEEL-TO-STEEL SCREWS
Page 32
SPECIALITY SCREWS
Page 33
23
Quik Drive
The fastest and most
reliable auto-feed system
•drywall
•ceilings
•flooring
•decking
•wood to steel
•steel-steel
•speciality screws
Quik
Drive
Stainless
Steel Fixings
Collated
andand
Corrosion
Resistant
Fastenings
How The Quik-Drive Tables Work
ad
bs
He
Ni
er
ith
Ri
bb
ed
W
af
w
ad
ad
ad
Fi
ne
Bo
x
Th
Th
re
re
ad
re
Th
se
ar
ad
He
Tr
im
ex
1/
4”
H
ad
in
Sh
ar
p
Po
i
nt
nt
tP
oi
lo
Pi
Po
i
ill
17
e
Dr
ill
Ty
p
Dr
Po
i
nt
gs
in
/w
w
nt
nt
Hi
Point Style
Po
i
Tool
Part
Number
Co
-L
o
Tw
Th
re
Le
ad
s
Thread Style
He
ss
n
Tr
u
W
as
Pa
he
p
Ca
Bu
Recommended
Screw drive
Motor RPM
He
ea
d
ad
He
He
gl
at
e
He
Head Style
Fl
Quantity of
Screws per
Box
ad
Curved or
Straight
Strip Screw
rH
Length
of Screw
ad
Thread
Diameter
ad
Head
Diameter
COATINGS - FINISHES - STAINLESS STEEL
304/305 (A2) Stainless Steel: 304/305 (A2) stainless steel is a nickel chromium austenitic grade of stainless steel
and is inherently non-magnetic. This material provides very good corrosion resistance. No visible sign of surface red
rust at 1000 hours of salt spray test.
N2000® Mechanically Galvanised: Mechanical galvanisation provides a protective zinc nickel alloy coating over base
metal. The coating is applied by mechanically tumbling base metal with non-metallic impact beads and zinc powder.
Less than 10%
surface red rust at 1,000 hours of salt spray test.
Quik Guard®: is a proprietary double barrier coating that provides a level of corrosion protection suitable for many
preservative-treated wood applications. Less than 10% surface red rust at 950 hours of salt spray test.
Yellow Zinc Dichromate: Coating offers minimum amount of corrosion protection and is intended for dry, noncorrosive applications only.
Clear Zinc: Coating offers minimum amount of corrosion protection and is intended for dry, non-corrosive
applications only.
Grey Phosphate: Coating offers minimum amount of corrosion protection and is intended for dry, non-corrosive
applications only.
General Note About Salt Spray Testing: Salt spray testing is in accordance with ASTM B117, is not intended to
represent real world corrosive performance of screw coatings. It should only be used for comparative evaluation
between like products. Many variables can affect the outcome of the salt spray test, such as screw features, coating
types, post coating processes etc.
25
Quik
Drive
Stainless
Steel Fixings
Collated
andand
Corrosion
Resistant
Fastenings
DRYWALL
DWC (Dry Wall Coarse)
EN 14566
• Drywall to wood applications
Item Reference
BIT2PE
Grey Phosphate finish.
DWC3525PE
8.2
3.5
25
30
2,500
2,500
6,000
QDPRO51/QD76KE
DWC3535PE
8.2
3.5
35
30
2,500
2,500
6,000
QDPRO51/QD76KE
DWC3540PE
8.2
3.5
40
30
2,500
2,500
6,000
QDPRO51/QD76KE
DWC3550PE
8.2
3.5
50
30
2,000
2,500
4,500
QDPRO51/QD76KE
DWC3930PE
8.2
3.9
30
30
2,500
2,500
6,000
QDPRO51/QD76KE
DWC3955PE
8.2
3.9
55
30
2,000
2,500
6,000
QDPRO51/QD76KE
DWC3965PE
8.2
3.9
65
30
1,500
2,500
4,500
QD76KE
DWF (Dry Wall Fine)
EN 14566
• Drywall to steel applications
• For 0.6mm to 0.9mm Steel
BIT2PE
Item Reference
DWF3525PE
8.2
3.5
25
30
2,500
2,500
6,000
QDPRO51/QD76KE
DWF32PE
8.2
3.8
35
30
2,500
2,500
6,000
QDPRO51/QD76KE
DWF41PE
8.2
3.8
40
30
2,500
2,500
6,000
QDPRO51/QD76KE
DWFSD (Dry Wall Fine Self Drilling)
EN 14566
• For 1.2mm to 2.2mm Steel
• #2 Drill point
BIT2PE
Item Reference
DWFSD32PE
8.2
3.4
32
30
2,500
2,500
QDPRO51/QD76KE
DWFSD41PE
8.2
3.4
31
30
2,500
2,500
QDPRO51/QD76KE
Yellow zinc dichromate.
26
Please note: All dimensions in millimetres.
Quik
Drive
Stainless
Steel Fixings
Collated
andand
Corrosion
Resistant
Fastenings
DRYWALL
RDWF
(Reverse
DWHL (Dry
Wall HighDry
Low)Wall Fine)
EN 14566
• Dense Drywall to wood
Item Reference
BIT2PE
DWHL48PE
RDWF30BE
8.2
6.3
4.2
3.8
48
30
30
2,500
2,000
2,500
4,500
QDPRO51/QD76KE
RDWF40BE
Grey phosphate
finish.
6.3
4.2
40
30
2,500
2,500
4,500
QDPRO51/QDPRO64/
QD76KE
CURVED COLLATION
Quik Drive®
Patented Collation
• Easier toenailing
• Easier to move between driving locations without drag
• Strip is pointed at leading end for easy loading
27
SUBFLOORING
EC5
WSC (Wood Screw Coarse)
EN 14592
• Wood to wood applications
Item Reference
BIT2SE
WSC32E
8.4
4.2
32
30
2,500
2,500
4,500
QDPRO51/QD76KE
WSC38E
8.4
4.2
38
30
2,000
2,500
4,500
QDPRO51/QDPRO64/
QD76KE
Yellow Zinc Dichromate.
WSNTL (Wood Screw Nibs Twin Lead)
EN 14592
Item Reference
BIT3SE
WSNTL44E
8.4
4.6
44
30
2,000
2,500
4,500
QDPRO51/QDPRO64/
QD76KE
WSNTL51E
8.4
4.6
51
30
2,000
2,500
4,500
QDPRO51/QDPRO64/
QD76KE
WSNTL64E
8.4
4.6
64
30
1,500
2,500
QDPRO64/QD76KE
WSNTL76E
8.4
4.6
76
30
1,000
2,500
QD76KE
Yellow Zinc Dichromate.
WSNTLG (Wood Screw Nibs Twin Lead Galvanised)
• Suitable for outdoor use
BIT3SUE
EN 14592
Item Reference
WSNTLG51E
8.4
4.6
51
30
2,000
2,500
4,500
QDPRO51/QDPRO64/
QD76KE
WSNTLG64E
8.4
4.6
64
30
1,500
2,500
QDPRO64/QD76KE
N2000 ® Mechanically galvanised finish.
28
DECKING
DTHQ (Deck Trim Head Quik Guard®)
• Decking to wood applications
Item Reference
BIT2SUE
DTHQ51E
6.2
4.2
51
30
2,000
2,500
QDPRO51/QDPRO64/
QD76KE
DTHQ64E
6.2
4.2
64
30
1,500
2,500
QDPRO64/QD76KE
DTHQ76E
6.2
4.2
76
30
1,000
2,500
QD76KE
Quik Guard ® coating.
Non-Collated Decking Screw
LDST (Loose Trim Head Decking Screw)
This screw is supplied loose in plastic tubs.
LDST is NOT compatible with the Quik Drive system.
• Type 17 point ensures a faster straighter start
• Coated for longer life in exterior applications
• Square drive for less drive wear and more torque
• Free bit supplied with every tub
• Salt spray tested for 1,000 hours
• Corrosion resistance prevents rust staining
• Trim head for a neater finish
• Strong re-usable plastic tub.
Item Reference
LDST63
6.2
4.2
63
400
LDST76
6.2
4.2
76
300
29
DECKING
SSDHSD (Stainless Steel Hardwood Decking Screw)
• Hardwood to hardwood decking screw
Item Reference
BIT2SE
SSDHSD50E
7.2
5.3
50
30
1,000
2,500
QDPRO76SKE
SSDHSD60E
7.2
5.3
60
30
1,000
2,500
QDPRO76SKE
SSDTH (Stainless Steel Deck Trim Head)
• Decking to wood applications
Item Reference
BIT2SE
SSDTH51E
6.3
4.2
51
30
1,000
2,500
QDPRO51/QDPRO64/
QD76KE
SSDTH64E
6.3
4.2
64
30
1,000
2,500
QDPRO64/QD76KE
305 Stainless steel.
SSWSCB (Stainless Wood Screw Coarse Bugle Head)
• Tile roofing to wood applications
Item Reference
BIT2SE
SSWSCB51E
8.5
4.6
51
30
2,000
2,500
QDPRO51/QDPRO64/
QD76KE
SSWSCB64E
8.5
4.6
64
30
1,500
2,500
QDPRO64/QD76KE
305 Stainless steel.
30
WOOD TO STEEL
TB (Truck Bed)
• Wood to steel applications
• #4 Drill point with wings
Item Reference
BIT3SE
TB645E
11.7
6.1
45
23
1,000
1,000
2,500
QDHSD60
TB660E
11.7
6.1
60
23
750
1,000
2,500
QDHSD60/QDHSD75
TB675E
11.7
6.1
75
23
750
1,000
2,500
QDHSD75
Yellow Zinc Dichromate finish.
TBG (Truck Bed Galvanised)
Item Reference
BIT3SUE
TBG645E
11.7
6.1
45
23
1,000
1,000
2,500
QDHSD60
TBG660E
11.7
6.1
60
23
750
1,000
2,500
QDHSD60/QDHSD75
30
750
1,000
2,500
QDHSD75
N2000 ® Mechanically galvanised finish.
FHSD (Flat Head Self Drilling)
Item Reference
BIT3SE
FHSD64E
8
4.2
64
WSee page 22 for details on self drilling screws.
31
WOOD TO STEEL
PPSD (Pilot Point Self Drilling)
• #2 Drill point
Item Reference
BIT3SE
PPSD49E
8.2
4.0
49
30
2,000
2,500
QDPRO51/QDPRO64/
QD76KE
23
2,500
2,500
QDPROPH
STEEL TO STEEL
PHSD (Pan Head Self Drilling)
• Steel to steel applications
Item Reference
BIT2SE
PHSD19E
8
4.1
19
Clear Zinc Finish.
WSee page 22 for details on self drilling screws.
32
SPECIALITY SCREWS
CBSD (Cement Board Self Drilling)
• Fibre cement siding to steel applications
Item Reference
BIT2SUE
CBSDQ41E
8.4
4.2
41
30
1,500
2,500
QDPRO51/QDPRO64/
QD76KE
CBSDQ55E
8.4
4.2
55
30
1,500
2,500
QDPRO64/QD76KE
30
1,500
2,500
QDPRO51/QDPRO64/
QD76KE
Quik Guard ® coating.
BHSD (Bugle Head Self Drilling)
Item Reference
BIT2PE
BHSDZ41PE
8.2
4.2
41
Clear zinc coating.
MTH (Modified Trim Head)
• Underlayment applications
Item Reference
BIT2SE
MTH32E *
6.9
3.8
32
30
2,500
2,500
QDPRO51/QD76KE
MTHZ25E **
6.9
3.8
25
30
2,500
2,500
QDPRO51/QD76KE
* Grey Phosphate Finish
** Yellow Zinc Dichromate Finish.
33
Stainless Steel
Fastenings
The following guidance notes have been
produced to assist the cladding installation
professional. For more detailed technical
assistance, please contact the
Simpson Strong-Tie® technical support team on
01827 255600 or visit www.strongtie.co.uk.
•
Cladding fixings should preferably be of stainless steel due
to their inherent corrosion protection and the fact that the
colour of the head will weather to a similar colour to untreated
cladding.
•
Galvanised or coated steel screws are not preferred as the
coating on the head can be damaged during driving which can
result in subsequent rust staining. This is especially important
for unfinished cladding boards as there is no possibility of
replacement of the protection during coating of the boards.
•
Exceptions to the above would be when cladding is fixed
to galvanised steel members. In this case it is necessary to
avoid galvanic corrosion due to dissimilar metals. This can be
avoided by fixing battens to the steel members using coated
steel screws, then fixing the cladding to the battens using
stainless steel screws.
•
Fasteners should be driven slightly below the surface to allow
for shrinkage in board thickness thus preventing the nail heads
from standing proud.
•
Nail penetration into battens should be twice the thickness of
the board for ring shank nails.
•
Proprietary clips are available to connect the cladding to the
battens.
•
Angle brackets are available to connect the vertical battens
directly to the wall without the need for horizontal battens.
This system creates a zone for insulation and/or ventilation
between the wall and the cladding. An example of this system
is Simpson Strong-Tie’s ABC Cladding Bracket.
•
A Structural Engineer should be involved in the design of the
cladding to ensure the correct type and number of fasteners
and brackets are used to adequately support the loads from
self weight and wind.
35
ANNULAR RING SHANK NAILS
Ring Shank Nail
Annular Ring Shank : 305 (A2) or 316 (A4) Stainless Steel
Diamond patterned head blends with wood texture,
diffracts sunlight and accepts surface finishes.
Annular ring threads resist cupping of cladding
boards and prevent nail-head popping.
Slender gauge and diamond point prevents splitting.
Can be driven flush or counter-sunk without crushing
the surrounding wood.
Choose 316 marine grade stainless for seaside
applications and for superior corrosion resistance.
Item
Reference
36
Penny Size
Length
(mm)
Gauge
Weight
Approx.
Per Pack (kg)
Count per Pack
Item Code in
316 Marine Grade
Stainless Steel
S6SND1E
6d
51
13
0.45
245
T6SND1E
S6SND5E
6d
51
13
2.27
1,225
T6SND5E
S8SND1E
8d
64
13
0.45
196
T8SND1E
S8SND5E
8d
64
13
2.27
980
T8SND5E
S10SND1E
10d
76
12
0.45
120
T10SND1E
S10SND5E
10d
76
12
2.27
600
T10SND5E
S16SND5E
12d
90
11
2.27
440
T16SND5E
SWANEZE® SCREWS
Swaneze® Bugle Head Screw
High ‘Pull-Out’ Resistance
Bugle head sits flush with the timber.
Square drive for improved driving torque.
Coarse thread along 2/3 of it’s #8 shank.
Draws timber tighter to the joist.
Type 17 point provides a faster, straighter start.
Item Code
Length
(mm)
Shank ø
(mm)
Head ø
(mm)
Quantity Per
Pack
Approx. Area Coverage
per Pack
S08200DB1E
51
4.17
8.74
128
2.6m 2
S08200DB5E
51
4.17
8.74
640
13.3m 2
S08250DB1E
64
4.17
8.74
102
2.1m 2
S08250DB5E
64
4.17
8.74
510
10.6m 2
S08300DB1E
76
4.17
8.74
82
1.7m 2
S08300DB5E
76
4.17
8.74
410
8.5m 2
Swaneze™ Trim Head Screw
For a Neat Finish
Trim head provides a neat, professional finish.
Coarse thread along 2/3 of it’s #7 shank.
Draws timber tighter to the joist.
Item Code
Length
(mm)
Shank ø
(mm)
Head ø
(mm)
Quantity Per
Pack
per Pack
S07200FB1E
51
3.81
5.84
154
3.2m 2
S07200FB5E
51
3.81
5.84
770
16.0m 2
S07200FBBE
51
3.81
5.84
4,000
83.3m 2
S07250FB1E
64
3.81
5.84
126
2.6m 2
S07250FB5E
64
3.81
5.84
630
13.1m 2
S07250FBBE
64
3.81
5.84
2,500
52.1m 2
S07300FB1E
76
3.81
5.84
98
2.0m 2
S07300FB5E
76
3.81
5.84
490
10.2m 2
S07300FBBE
76
3.81
5.84
1,750
36.4m 2
37
FIBRE CEMENT BOARD SCREWS
FY-CEM™ Wood Screw
Fibre Cement to Wooden Studding Screw
Self counter-sinking nibs keep head flush with the surface.
Threaded along full length of the screw.
Superior corrosion resistance (316 marine grade).
(mm)
Shank ø
(mm)
Head ø
(mm)
Count per Pack
#8
41
4.17
10
100
T08C162WQME
#8
41
4.17
10
1,000
T08C225WQME
#8
57
4.17
10
1,000
Item Reference
Size
T08C162WQCE
Length
Approx.
FY-CEM™ Metal Screw
Self Drilling Fibre Cement to Metal Studding Screw
Self counter-sinking nibs keep head flush with the surface.
Threaded along full length of the screw.
Use 53mm long screws to attach fibre cement to stress skin panels.
410 stainless steel can be hardened through heat treatment, giving it
the ability to drill through metal.*
Fasten fibre cement through furring strips to steel studs.
Item Reference
Size
F08T162WDCE
#8
(mm)
Shank ø
(mm)
Head ø
(mm)
Count per Pack
41
4.17
10
100
Length
* 410 Stainless does not offer the same corrosion resistance as 305 or 316 stainless steel.
38
Approx.
SHAKE AND SHINGLE NAILS
Annular Ring Shank Nail
Firmly Secure Shakes and Shingles of All Types
Diamond patterned head blends with wood texture,
diffracts sunlight and accepts surface finishes.
Ample bearing surface firmly secures shakes and
shingles of all types.
Annular ring threads resist cupping of cladding
boards and prevent nail-head popping.
Slender gauge and diamond point prevents splitting.
Can be driven flush or counter-sunk without crushing
the surrounding wood.
Item Reference
Penny Size
Length
(mm)
Gauge
Weight
Approx.
Per Pack (kg)
Count per Pack
Item Code in
316 Marine Grade
Stainless Steel
S6SN71E
6d
51
13
0.45
237
T6SN71E
S6SN75E
6d
51
13
2.27
1,185
T6SN75E
39
DECKING SCREW
Woodpecker™ Decking Screw
Trim Head 6 Lobe Drive : Hardwood
Superior screw for penetrating the hardest of woods.
6 Lobe drive prevents the screw head from stripping.
Unique ‘box’ thread allows fast and easy installation, reducing driving torque.
Woodpecker™ Pack Information
Item Code
Length
(mm)
Shank ø
(mm)
Head ø
(mm)
Quantity Per Pack
per Pack
T07225WPPE
T07225WPP
57mm
3.81
5.84
350
7.3m 2
T07225WPBE
T07300WPP
76mm
57mm
3.81
5.84
1750
350
36.5m
7.3m 22
T07300WPPE
76mm
3.81
5.84
350
7.3m 2
T07300WPBE
76mm
3.81
5.84
1750
36.5m 2
Hardwood to Hardwood Decking Screw
Loose variant of the collate SSDHSD
305 (A2) Stainless Steel
SSDHSD Pack Information
40
Item Code
Length
(mm)
Shank ø
(mm)
Head ø
(mm)
Quantity Per Pack
SSDHSD50ER100
50
5.3
7.2
100
SSDHSD50ER350
50
5.3
7.2
350
SSDHSD50ER1000
50
5.3
7.2
1000
SSDHSD60ER100
60
5.3
7.2
100
SSDHSD60ER350
60
5.3
7.2
350
SSDHSD60ER100
60
5.3
7.2
1000
TIMBER TAMER
Timber Tamer®
Hex Washer Head : Timber Framing
Ideal for outdoor projects which need a longer screw, such as: timber framing, barn construction, oak
sleepers and many more timber uses.
Available in lengths up to 20cm.
Unique ‘box’ thread allows fast and easy installation, reducing driving torque.
Timber Tamer™ Pack Information
Size
Thread Length
(mm)
Quantity Per Pack
T14400TPE
6 x 102mm
57
20
T14400TTBE
6 x 102mm
57
100
T14600TPE
6 x 152mm
57
10
T14600TTBE
6 x 152mm
57
100
T14800TTBE
6 x 203mm
57
50
Catalogue C-FASTENERS12 © 2013 SIMPSON STRONG-TIE COMPANY INC.
Item Code
41
EB-TY HIDDEN DECK FASTENER
The EB-TY provides a unique method of fastening
deck boards that makes the fasteners virtually invisible.
Fastening is done into the side of the board, leaving a
fastener-free deck surface.
The EB-TY is a polypropylene biscuit fastener that fits into
a slot the builder cuts into the edge of the deck boards
with a standard biscuit joiner.
The EB-TY fasteners are inserted and fastened with
a screw driven into the joist. Nesting each successive
board against the EB-TY automatically ensures consistent
spacing and uniform height.
•
•
•
•
•
Easy to install since all fastening is done from the top
side
Affords easier deck resurfacing since nail heads are
eliminated from the deck surface
Formed from long lasting polypropylene to last
the life of the deck
Stainless-steel #7 trim-head screws included
Each EB-TY package includes installation instructions
and enough
EB-TY fasteners, screws and tapered Ipê wood plugs
to install 100 square feet of decking (175-Pack quantity
assumes 6" wide boards, installed perpendicular to
joists spaced 16" on center)
Tapered Ipê
Wood Plugs see next page
Working from left to right, compare the information in the
columns to your application to select the correct EB-TY for the job.
Decking Material
IPÊ
Redwood
Cedar
PVC
Kiln-dried
Composites
Natural Woods
Decking
Spacing
Thickness Requirement
(mm)
(mm)
17.46
17.46
Special
Application
Information
Biscuit
Model No.
2.38
N/A
EBE007MINI
6.35
“Live Cylinder”
design for
expansive
material
Model EBE007MINI
42
Ordering Information
Pack
Quantity
Pack
Model No.
Screw Type
175
175-EBTYMT
316 Stainless
175
175-EBTYJR
305 Stainless
175
175-EBTYJT
316 Stainless
EBE006JR
Model EBE006JR
EB-TY HIDDEN DECK FASTENER
Fasten one side of first deck
board using screws and plugs
#7x 2 1⁄4" trim
head screw
angled at 45°
Installation Information
•As with all decking materials, please
consult manufacturer’s installation instructions
for deck height requirements and deck board
spacing.
•All slots for the EB-TY’s (except for the 316TT)
can be cut using a #20 setting with
a biscuit cutter/plate jointer or router with 5⁄32"
slot cutter. Decking can be grooved the entire
length of the board.
•Always butt boards over a joist. One method
for installing butt ends is to cut the keel off the
bottom of an EB-TY, slot the board ends, and
insert the EB-TY. Another, more reliable method
is to face-screw and plug.
If you have questions about which EB-TY
to use, contact Simpson Strong-Tie.
Deck boards
Slots cut with
biscuit joiner
EB-TY
biscuit fastener
Floor joist
Second deck board
fastened with EB-TY
and construction
adhesive applied to
top of floor joist
Installation Process
!
1. Fasten the first board using construction adhesive and screws, then cut
slots where the board intersects joists using a 5⁄32" router bit or plate joiner
(biscuit cutter #20) and install the first EB-TY fasteners. Do not use
construction adhesive with composite decking (see note on the right).
2. Cut slots in the next board where it intersects the joists.
Construction adhesive is not
recommended when installing
composite deck boards as some
adhesives will have an adverse
reaction upon contact with
certain plastics.
3. Apply a bead of construction adhesive to the top of each joist and install the new
board so that the slots fit over the EB-TY fasteners installed in the first board.
4. Insert EB-TY fasteners into each slot in the exposed
edge of the board and fasten with screws.
Bring the schematic below to your lumber yard. They will use it
to pre-groove your decking material to accept EB-TY fasteners.
5. Repeat the process until all boards are installed.
Refer to the installation instructions (included) for more
information. Consult composite decking manufacturer’s or
wood supplier’s installation instructions for deck height
requirements and deck board spacing.
0.500"
0.163"
Pre-grooving the entire length of the deck board is a
time-saving alternative to individual grooves made with
a router or plate joiner. Some types of composite lumber
are available with grooves as an added feature. Have your
lumber yard use the schematic on the right to pregroove
boards to accept EB-TY fasteners.
Cut groove at center of material thickness
*For model numbers TP015 and 316TT screws are to be driven at a 90° angle to the board face.
Ipê Wood Plugs
FEATURES:
• Made of high quality Ipê and tapered for ease of use
• For use on decks using the EB-TY® system (first boards, aprons, etc.); also stairs, railings
Plug Diameter
(in.)
⁄8
3
Plug Length
(in.)
Count
Quantity
Model No.
⁄16
100
WDPLUG-100
7
43
Quik
Drive
Stainless
Steel Fixings
Collated
andand
Corrosion
Resistant
Fastenings
IMPORTANT INFORMATION
IMPORTANT INFORMATION & GENERAL NOTES
These notes are provided to ensure proper installation of Simpson Strong-Tie Company Inc. products and must be followed fully.
a. Simpson Strong-Tie Company Inc. reserves the right to change specifications, designs, and models without notice or liability for such
changes.
b.Unless otherwise noted, dimensions are in millimetres, loads are in kilograms, and shear loads are applied perpendicular to edge.
This catalogue includes all information available as of the effective date of publication. Please consult our website www.strongtie.eu for
current information.
WARRANTIES
QD & QDPRO Kits and attachments
The kits and attachments in the QD and QDPRO series sold by Simpson Strong-Tie® are covered by a one-year part and labour guarantee
after the date of purchase. Simpson Strong-Tie® will repair or replace any defective tool on sight of the purchase invoice and the completed
guarantee card. This guarantee will apply to uses of the attachment that are normal and compliant with the instructions of the tool
manual. Screwdriver motors that may be supplied with the Products are manufactured by others and are warranted by their respective
manufacturers.
Guarantee extension to 3 years for QD & QDPRO
Simpson Strong-Tie® offers a guarantee extension to 3 years after the purchase date. The guarantee extension covers the foreseen tools
for parts and labour. The guarantee extension will be considered as effective on receipt of the duly completed warranty form sent to
Simpson Strong-Tie® within one year after the purchase of the kit or attachment. Our guarantee form can also be filled in on our web site
www.strongtie.eu.
Guarantee limitation:
The guarantee of the foreseen tool will not apply in the following cases:
• Use of the attachment with other screws than the ones sold by Simpson Strong-Tie®, the tool has been designed with specific characteristics,
• Mandrel and bits are defined as wear parts, they are not covered by the guarantee,
• Any change made to the tools will exclude them from the guarantee,
• The screw driver motor is covered by the manufacturer’s guarantee.
The Simpson Strong-Tie® company declines any liability for damageable consequences resulting from the immobilisation of equipment which would be under
the guarantee. The Simpson Strong-Tie® company declines any responsibility for direct, consequential or accidental damageable consequences resulting from
a use breaching professional rules and the instructions contained in the manual.
INSTRUCTIONS FOR THE DESIGNER
1. There are many choices of fasteners, tools and other products. It is often difficult to determine which type of product is best suited
for your application. In some cases, there may be more than one type of product that will work well. The information in this catalogue is
intended to guide the Designer toward the product best suited for the specific application, use and environment. The choice of which product
to use should be made by a qualified Designer.
2. Select fasteners of a type, size, length, thread, head, finish, material, tip and other characteristics suitable for your application, use and
environment. Incorrect fastener selection may cause the connection to fail.
3. Some hardened fasteners may have premature failure if exposed to moisture. These fasteners are recommended to be used in dry interior
applications.
4. Select a fastener only after reading the corrosion information in this catalogue.
5. If using a Quik Drive® product with any other Simpson Strong-Tie® product, consult the Simpson catalogue or www.strongtie.eu for
detailed information concerning such other product.
INSTRUCTIONS FOR THE INSTALLER
1. Use Quik Drive® tools only with authentic Quik Drive® fasteners. Other fasteners may cause the tool to malfunction and become
damaged.
2. If a Quik Drive® product is compatible with a specified tool, do not use the product with any other tool.
3. Choose the proper tool to suit your needs.
4. Use products only in accordance with all instructions.
5. All specified fasteners must be installed according to the instructions in this catalogue.
6. Use proper safety equipment and follow all safety instructions. Always wear protective eyewear.
44
IMPORTANT INFORMATION
SAFETY WARNINGS
Safe Work Area
a.Keep work area clean and well lit.
b.Do not operate Quik Drive® tools in dangerous environments. Do
not expose tools to rain, or use them in damp or wet locations. Do
not use Quik Drive tools in the presence of flammable liquids, dust
or gases, as they can create sparks.
c.Keep bystanders, children and visitors away while operating a Quik
Drive tool. Distractions can cause accidents and serious bodily injury.
Reduce Risk of Electrical-Related Accidents
a.Guard against electrical shock. Prevent body contact with grounded
surfaces.
b.Never modify the Quik Drive tool power plug in any way. Always
use a plug with a matching outlet. Use of proper, unmodified plugs
and outlets reduces the risk of electric shock.
c.Do not abuse the power cord. Never carry a Quik Drive tool by its
cord or yank it to disconnect from an outlet or other receptacle.
Keep cord away from heat, oil, sharp edges, or moving parts.
Replace damaged cord immediately. Damaged cords increase the
risk of electrical shock.
d.When operating a Quik Drive tool outside, use extension cords
suitable for outdoor use.
Personal Safety
a.Stay alert. Do not use a Quik Drive tool while tired or under the
influence of drugs, alcohol, or medication. Use common sense
when operating the tool. Inattention while operating Quik Drive
tools may result in serious bodily injury.
loose clothing or jewellery. Keep your hair, clothing, and gloves
away from moving parts. Loose clothes, long hair, or jewellery can
be caught in moving parts and result in serious bodily injury.
c.Be sure the power switch on a Quik Drive tool is in the off position
before plugging in the tool. Do not carry tools with your finger on
the switch.
d.Keep proper footing and balance at all times.
e.Always use safety equipment such as wearing protective glasses,
dust masks, non-skid safety shoes, hard hats, and/or earplugs.
Quik Drive Tool Use and Care
a.Do not force the Quik Drive tool. Use the correct tool for the
application.
b.When not in use, Quik Drive tools should be stored in a dry place
and out of the reach of children and other untrained persons.
c.Disconnect the plug from power source before making
adjustments, changing accessories, or storing tool.
d.Maintain Quik Drive tools with care. Follow instructions for
lubricating and changing accessories.
e.Regularly check for misalignment or binding of moving parts, and
other conditions that may affect operation.
f. Use only accessories recommended by Simpson Strong-Tie
Company, Inc.
g.Any repairs to electric tools should be performed by qualified
personnel. Use only authorised parts.
b.Dress appropriately when using a Quik Drive tool. Do not wear
FASTENER CORROSION INFORMATION
Understanding the Issues
Metal fasteners will corrode and may lose load-carrying capacity when installed in corrosive environments or exposed to corrosive
materials. There are many environments and materials which may cause corrosion including ocean salt air, fire-retardants, fumes, fertilizers,
preservative-treated wood, dissimilar metals, and other corrosive elements.
The many variables make it impossible to accurately predict if, or when, significant corrosion will begin or reach a critical level. This relative
uncertainty makes it crucial that specifiers and users be knowledgeable of the potential risks and select a product coating or metal suitable
for the intended use.
It is also important that regular maintenance and periodic inspections are performed, especially for outdoor applications. When outdoor, it is
common to see some corrosion, even stainless steel can corrode. If significant corrosion is apparent or suspected, then wood, fasteners and
connectors should be inspected by a professional engineer or contractor and may need to be replaced.
Recently, pressure-treated wood formulations have changed. Due to the many different pressure treatment formulations, retention levels,
moisture content, and because the formulations may vary, understanding which connectors and fasteners to use with these materials is
a complex task. It is important to educate yourself by reviewing technical literature on the topic and to get the latest information by the
manufacturer.
Stainless Steel is always the most effective solution to corrosion risk. To best serve our customers, Simpson Strong-Tie is evaluating the
options to identify the safest and most cost-effective solutions. Based on our testing and experience there are some specific applications that
are appropriate for N2000®, XtremeCoat™, Quik Guard® and TufCote® coated fasteners.
Free Quik Drive® Demonstration DVD
Get the most out of your Quik Drive® system: Contact Simpson Strong-Tie on 01827 255600 or
visit www.strongtie.co.uk/qd to request a free copy of the Quik Drive demonstration video on DVD.
The sequence shows you how to assemble the kit, load screws, change bits and put the the tool to use. It
perfectly illustrates the benefits of the system and serves as the ideal point of sale tool.
45
SALES SUPPORT
Point of Sale Support for Distributors
Our range of stainless steel fastenings is designed to look good on the shelf as well
as installed.
Our network of distributors are supported with excellent product packaging, point of
sale display panels, external banners and much more.
Call our sales team on 01827 255600 if you would like to join our network.
TECHNICAL SUPPORT
We stock a large selection of high quality, stainless steel fasteners
for cladding, decking and other applications which offer the
combined benefits of strength, durability and corrosion resistance.
You can count on Simpson Strong-Tie® products to endure the
challenges of harsh environmental elements and time - in most
cases outlasting the cladding itself.
Fast Technical Support
For the best technical support and practical advice, contact our Technical
Support Team.
Call +44(0)1827 255600 or Fax +44(0)1827 255629 or
Email: [email protected]
For sales enquiries call:
01827 255600 or visit: www.strongtie.co.uk
47
Collated and
Corrosion Resistant
Fastenings
Applications include:
Decking
Cladding
Drywall
Flooring
Ceilings
Truck Beds
Marine Installations
Oak Framing
Modular Housing
C-FIXINGS-13
SIMPSON STRONG-TIE
®
Winchester Road
Cardinal Point
Tamworth
Staffordshire
B78 3HG
United Kingdom
Tel: +44 1827 255 600
Fax: +44 1827 255 616
www.strongtie.co.uk

Quik Drive™ and - Simpson Strong-Tie

Transcription

Similar documents

bis tristar - LUCKINSlive

kik-step®

Skate Deterrents

Quik X Transportation - Titan Construction Company Ltd.

Product sheet BBPE050.4A

DS275-18V

ZIMA 126-CS-Fabrication.indd

Vetus Cowl Vent Sizes and Specifications

Vertical Turbine

Feature Sheet