Untitled - Anglers Resource

Incredible
Transformations.
Some will call it an ”advance”, others an ”innovation”. In truth it’s more of a transformation; a morph from what carbon fiber blank technology was into what carbon fiber
blank technology will become. Yes, new materials play a part, but new thinking is the
true catalyst. The kind of thinking that gains clarity only with time; thinking that ultimately lets you do in your head what others struggle with on paper.
Point Blank is the manifestation of such thought. A blank that perhaps is as good as blanks can get until a chance discovery in
the future changes everything.
Welcome to a blank that deserves your best
work. Point Blank. A blank that hits every
expectation dead center.
You can’t miss when it’s
Point Blank.
Welcome to a list of features
you won’t find anywhere else.
Dynamic Filament Bias
Inside the walls of a Point Blank are grid-like layers of incredibly strong carbon filament material that travel 360-degrees around the blank at specific plus and minus angles from tip
to butt. These angled, mesh-like single filaments add tremendous hoop strength and
increase flexibility compared to carbon scrim. Better still, the dynamics of these angles adds a precise new way to control action and power in any given blank. But
that’s not the only thing Dynamic Filament Bias does...
Zero Scrim Construction
”Scrim” was a great advancement in hoop strength when it was first
made of fiberglass. It offered an even bigger performance boost when
carbon scrim appeared - but here’s the rub. All scrims are multi-directional; the fibers lie in a random pattern, similar to a piece of
paper. This pattern actually diffuses the transmission of vibration in a specific direction. Like insulation in an attic, these
multi-directional fibers can actually deaden signals travelling
through the blank. Dynamic Filament Bias construction is
10 times stronger than scrim, but it is also lighter and
most importantly, DIRECTIONAL. It spirals the slightest
vibration down the blank through an ultralight, continuous grid of carbon filaments and allows us to build the
most sensitive blanks ever offered.
Filament Bias is the lightest carbon material available
yet achieves strengths 10 times greater than scrim.
Used properly, it creates a lighter, more sensitive, more
durable blank than any previous construction method.
Multi-Ton Progressive Modulus
Point Blanks, like many other high modulus blanks, feature a variety of
carbon fiber materials to get the job done. But that’s where the similarity ends and years of experience takes over. The specific characteristics of each small section of a Point Blank are more carefully
scrutinized than any before, and small progressive changes are incorporated in a proprietary gradient technique to smooth the transition from
one function to another. Coined ”Multi-Ton Progressive Modulus”, these
subtle changes are made using the finest carbon fibers available worldwide. And, when combined with Dynamic Filament Bias technology the variations and subtle control of the action become virtually endless.
Equiradial Power Butt
Close examination will reveal that Point Blanks feature a butt section that is equal in
diameter over a given distance. Point Blanks are the only blanks featuring this characteristic and it is an all new modification that has two key benefits.
1) Equal diameter
allows simpler
hardware installation and no worries
about mis-matched tapers that can lose contact between handles and blank. Better
contact increases strength and sensitivity.
2) Equal butt diameters force initial taper further out the blank. This is what gives
Point Blanks a ”big butt” profile but it also allows a degree of dead lift power unmatched by rods with similar lure weight and line class ratings. A Point Blank in any
power or action class will out ”boat flip” any competitive model with similar specs.
ELITE B.A.S.S. Pro, Bernie Schultz helped put
Point Blanks through rigorous testing.
Focused Pulse
Difficult to explain but easy to feel, Focused
Pulse is a unique benefit of an equal diameter butt section. In a tapered, hollow blank,
fibers transmit vibration much like a megaPoint of focus
phone. In a continuous taper blank these vibration speeds past the handle and are
absorbed by a cork or EVA butt cap. In Point
Blanks, the taper ends at the beginning of
Traditional Taper
the continuous diameter, causing a disruption in what would otherwise pass through the blank smoothly. This ”static” from rebounding vibration is focused at
or slightly ahead of the reel seat and makes even subtle bites easier to feel.
Tape2
Point Blanks undergo a high-overlap, high pressure pre-oven wrap designed to assure that the resulting resin/carbon fiber matrix is uniform,
consistent and absolutely void-free. Point Blanks are less prone to
failure as a result of this highly controlled pre-oven taping and the resulting blank is uniform, strong and offers more consistent performance characteristics from blank to blank.
Cat’s Tongue Finish
Tape2 creates a unique finish on Point Blanks that lends still more
strength to the finished product. As resin oozes through heated fibers
it ultimately pushes against the retaining tape at the blank’s surface.
The blank is at its strongest (and often lightest when compared to
coated blanks) when this outside layer of resin is left in tact. Cosmetically it has the feel of a cat’s tongue - smooth in one direction and
rough in the other. To maintain the strength but reduce the rough
feel, blanks are very lightly sanded and then coated
with an ultra thin satin finish to enhance the ridged
appearance. The finish establishes the ”look” of
a Point Blank, but it does more. The very slight
peaks and valleys created by the lighter sanding create extra bond strength as epoxy fills
the valleys when finish is applied to wraps.
The result is slightly better ”pull out” resistance and guides that stay in place.
Adding it all up...
Together, the features of this unique new
Tape2
Traditional
blank combine to form a single unit that
offers the perfect balance between
Tape2 adds stability and consistency
from blank to blank
durability, weight and sensitivity. Top
sections are designed for meticulous
lure presentation and feel while bottom sections are devoted to staggering lift capability and convenient hardware fit. In the middle is a transitional section that offers unmatched power, excellent control and a smooth blend between top and
bottom. Build a rod that zeros in on perfection, and hits it...POINT Blank.
Choose your weapon.
We feel that as a Custom Rod Builder you should be able to compare blanks at a glance to make a more informed decision about the rod you plan to build. That’s why Point Blanks go beyond the obscure 1 thru 5 power rating system to give
you an actual Power Reading. We load blanks into a horizontal fixture, measure the weight it takes to bend the blank one
third of its working length and then measure the angle of the tip at this weight. Best of all, that information is not tucked
away in a chart somewhere, we show the average power rating of each blank in the model number to provide a constant
reference of power regardless of length or action. ”PB” is Point Blank; ”66” or ”73” is length in feet and inches; ”1” or ”2”
is number of pieces and ”(300)” indicates power rounded in 5 gram increments.
Blank Weight
g/oz
Applications
Action
Angle
(degrees)
(Grams to bend
30% of length)
PB661LF
40g/1.41oz.
6-10lb mono • 10-15lb Braid • 1/32oz to 3/8oz lures
Small plastics • light jigs • unweighted live baits (shrimp)
balsa lures • shallow, small crankbaits
65
270
40g/1/41oz.
6-12lb mono • 10-15lb Braid • 1/32oz to 1/2oz lures
small jerk and twitch baits • small plastics •
balsa topwaters • dropshot 4-inch lures
65
360
40g/1.41oz.
6-14lb mono • 10-15lb Braid • 1/16oz to 5/8oz
plastics • saltwater grubs for speckled trout •
pop R’s, chuggers, Tiny Torpedos • drop shot • shaky head
66
395
45g/1.58oz.
6 -12lb mono • 10 - 15lb Braid • 1/16oz to 3/8oz lures
small jerk and twitch baits • small plastics •
small cranks/shallow cranks • dropshot 4-inch lures • grubs
68
380
50g/1.76oz.
8-14lb mono • 10-15lb Braid • 1/8oz to 5/8oz lures
plastics • saltwater grubs for speckled trout • spinnerbaits
top water poppers, small walking baits
67
440
55g/1.94oz.
8-17lb mono • 10-20lb Braid • 1/4oz to 3/4oz lures
light to heavy cover texas or carolina rigged soft plastics
spinnerbaits • buzzbaits • frogs • topwater walking baits • propbaits
68
560
40g/1.41oz.
6-10lb mono • 10-15lb Braid • 1/32oz to 3/8oz lures
Small plastics • light jigs • unweighted live baits
balsa lures • shallow cranks • top water 1/4oz
68
325
50g/1.76oz.
8-14lb mono • 10-15lb Braid • 1/16oz to 3/8oz lures
jerk and twitch baits • plastics • dropshot
grubs • crankbaits to 6 ft • lipped walleye baits
65
410
55g/1.94oz.
8-14lb mono • 10-15lb Braid • 1/8oz to 1/2oz lures
light texas or carolina rigged soft plastics • medium crankbaits to 6 ft
saltwater grubs for speckled trout • topwater • spinnerbaits
65
460
55g/1.94oz.
8-20lb mono • 15-30lb Braid • 1/2oz to 1oz lures
heavy cover, rigged soft plastics • spinnerbaits, buzzbaits in cover
frogs • topwater walking baits • heavier spoons for redfish, bluefish
65
525
50g/1.76oz.
8-12lb mono • 10-15lb Braid • 1/4oz to 5/8oz lures
jerk/twitch baits • plastics • dropshot • grubs • crankbaits to 6 ft
saltwater grubs for redfish, drum,
63
490
55g/1.94oz.
8-17lb mono • 15lb Braid • 1/4oz to 3/4oz lures
plastics • saltwater grubs for speckled trout • spinnerbaits
top water poppers • small walking baits • poppin’corks
67
530
60g/2.11oz.
12-20lb mono • 20-30lb Braid • 1/2oz to 1 1/4oz lures
heavy cover texas or carolina rigged soft plastics • Spinnerbaits
• buzzbaits • frogs • topwater walking baits • poppin’ corks
68
605
65g/2.29oz
17-30lb mono • 20-40lb Braid • 1oz to 2oz lures
heavy spinnerbaits • buzzbaits • large (3/4-1oz) grubs in saltwater
heavier spoons for redfish, bluefish • jigs for snook and small tarpon
67
650
60g/2.11oz.
8-17lb mono • 10-20lb Braid • 1/4oz to 3/4oz
medium cover texas or carolina rigged soft plastics •
crankbaits to 10 ft • deep saltwater grubs for speckled trout
65
475
60g/2.11oz.
10-20lb mono • 10-30lb Braid • 1/2oz to 1 1/4oz
heavy cover soft plastics • large spinnerbaits • buzzbaits
frogs • jigs for snook and small tarpon
65
610
80g/2.82oz.
17-30lb mono • 20-40lb Braid • 1oz to 2oz
heavy cover soft plastics • Spinnerbaits • buzzbaits • frogs • big grubs
62
690
95g/3.35oz.
17-30lb mono • 20-50lb Braid • 2oz to 5oz
A-Rig
63
1065
90g/3.35oz
20-40lb mono • 30-60lb Braid • 1oz to 5oz
Flippin’
65
1150
74
700
6’6” Light, Fast
6’6”
PB661MLXF
6’6” Med Light, Xtra Fast
PB661MXF
6’6” Med, Xtra Fast
PB691MLXF
6’9” Med Light, Xtra Fast
6’9”
PB691MXF
6’9” Med, Xtra Fast
PB691MHF
6’9” Med Hvy, Fast
PB701LF
7’0” Light, Fast
PB701MLF
7’0” Med Light, Fast
7’0”
PB701MF
7’0” Med, Fast
PB701MHF
7’0” Med Hvy, Fast
PB731MLF
7’3” Med Light, Fast
PB731MXF
7’3”
7’3” Med, Xtra Fast
PB731MHF
7’3” Med Hvy, Fast
PB731HF
7’3” Hvy, Fast
PB761MF
7’6” Med, Fast
PB761MHXF
7’6” Med Hvy, Xtra Fast
7’6”
Power
Point Blank #
PB761HXF
7’6” Med Hvy, Fast
PB761XXHMF
7’6” Dbl X Hvy, Mod Fast
PB761XXHF
7’6” Dbl X Hvy, Fast
PB7101MXF
COMING SOON!
7’10” Med, Xtra Fast
PB801MHF
8’0” Med Hvy, Fast
70g/2.5oz.
17-20lb mono • 20-40lb Braid • 1oz to 2oz
Swim Baits
Care and Use of your POINT Blank
As graphite technology has moved forward in recent years and blanks have gotten lighter and more sensitive
they have also gotten more fragile. High modulus carbon fiber is brittle by nature and the higher the modulus the
more brittle the material becomes. Still, advanced carbon fiber blanks are enormously powerful for their weight
and can handle fish far beyond what they ”feel” like they should be able to control. So, how do we address the
advantages of advanced carbon fiber against the inherent fragility of the material? The answer is pretty simple you need to take better care of rods made of these cutting edge materials. Follow the suggestions below and
your finished rod will provide the most rewarding angling experience you could hope for.
1) Shop Testing the Flex: When your blank arrives, use an accepted method of testing the flex. Don’t grab the tip
and curl it toward the butt, advanced carbon fiber does not like an unnatural bend. Push the tip gently against the
ceiling or floor or hold the rod in the mid-section and push the tip downward with an open palm.
2) Fighting Position: This is perhaps the most misunderstood use of any rod. Many fishermen believe that raising
the rod tip puts more pressure on the fish when in fact, once the rod tip passes 90-degrees to the butt, the rod is
actually losing power. The blank’s power lies in the mid and butt section of the rod, and learning to use this section
during a fight will enhance your chances of landing the fish. from 0 to about 45-degrees, the rod is doing maximum
work. Strive to use the power stored in the mid and butt section and you will be amazed at the power delivered
from such a lightweight blank. For snagged lures, point the rod directly at the snag and pull directly on the snag.
Do not risk your blank on a snag.
3) Landing Position: Poor landing technique accounts for almost as many broken tips as car doors and is not covered under any manufacturers warranty. Never bring a fish boatside and point the rod straight up to try to lift the
fish into the boat. Fine carbon tips will not withstand this sort of radical, high pressure bend. Instead, guide smaller
fish alongside the boat and, again using the power of the mid and butt section, lift the fish quickly into the boat
without excessively bending the tip section. If the fish is too large to ”boat flip”, extend the rod a full arms length
away from and behind you (and the fish) to reduce the amount of bend needed to reach down and lip, net or gaff
the fish. Always finish a fight with an amount of line equal to the length of the rod. A 7 foot rod should have 7 feet
of line (minimum) beyond the tip when landing a fish.
4) Fighting Angle: Many fishermen tend to point the rod skyward and crank hard when fighting a fish when it is
often more effective to move the rod to the side. Fish often do not seem to want to come up, but will move more
easily to the side allowing you to recover more line faster.
5) High Reaching: Regardless of how big the fish is or how tired you become, never reach up the rod to try and
gain a leverage advantage. In effect you are removing any portion of the rod below your hand and fighting the fish
with a shorter, less powerful rod. Breakage is common in these scenarios.
The above suggestions are not new, they have long been the best and most effective way to hook and land fish
of all kinds. They are universally accepted for fly rods as well as bait or spin cast rods, and for light or heavy
tackle. Adapting your fishing style to these suggestions will assure a long and productive life for your new POINT
Blank, and more fun than you’ve ever had on the water!
400 E. Section Avenue • Foley, AL 36535 • 1-251-943-4491