COMPONENT CATALOGUE

Transcription

COMPONENT CATALOGUE

Kaymar
4WD
ACCESSORIES
COMPONENT CATALOGUE
Proudly a Member of:
2016
issue date : August 2016
TO OPEN CLICK HERE
CONTENTS
INTERACTIVE
click on the contents item to go direct to the page
MAKE/MODEL
PAGE
MAKE/MODEL
PAGE
BT50 PRE2012152
TOYOTA
LC200
PRE AUG 2015
8
BT50 2012156
LC200
POST AUG 2015
22
JEEP
Fit a Kaymar Rear Bar to your vehicle and enjoy the benefits...
Improved Off-Road Rear End Clearance, Mount Jack, Aerial and Worklight on Carriers.
Protect the Rear End and Ute Tub of your vehicle, Carry two Spare Wheels or a Spare
Wheel and Jerry Cans.
Where can you see a Kaymar Bar?
LC10036
WRANGLER JK162
LC8049
HOLDEN
LC7858
COLORADO166
LC7663
RODEO170
LC7569
VOLKSWAGEN
LC6273
AMAROK173
LC4078
FLEET OPERATORS176
PRADO 15082
ACCESSORIES & LED179
PRADO 12091
WARRANTY182
Why invest in a Kaymar Rear Bar?
HILUX 200599
OZBAR
Modern vehicles are manufactured to meet cost and production criteria satisfactory
for the needs of the average buyer.
FJ CRUISER103
TOYOTA
NISSAN
LC100 IFS INDEPENDANT SUSPENSION
7
PATROL Y62108
LC100 LA LIVE AXLE
11
PATROL GU113
LC8015
PATROL GQ121
NISSAN
NISSAN NAVARA D40125
PATROL GU119
LANDROVER
PATROL GU423
HILUX 2015 SR595
DISCOVERY 3 & 4 FROM 2005+
129
DEFENDER 110133
MITSUBISHI
TRITON ML136
CHALLENGER 2010PB140
FORD
RANGER PX144
ISUZU
MUX148
MAZDA
BACK
World Leading Australian Manufacturer of 4X4 Rear
Bars, Wheel Carriers and Jerry Can Holders
October 11, 2016 12:17 PM
Page 4 PRICES SHOWN REPRESENT SUGGESTED SELLING
PRICES IN AUSTRALIAN AUD$ INCLUDING GST.
FREIGHT AND FITTING COSTS ARE NOT INCLUDED.
PLEASE NOTE - EVERY EFFORT HAS BEEN
MADE TO ENSURE THE ACCURACY OF THE
INFORMATION AND PRICES IN THIS CATALOGUE,
HOWEVER KAYMAR TAKES NO RESPONSIBILITY
FOR INADVERTENT ERRORS.
WE RECOMMEND YOU CONFIRM PRICES,
PRODUCT SUITABILITY AND DELIVERY DETAILS
WITH YOU DISTRIBUTOR PRIOR TO PLACING YOUR
ORDER.
BACK TO CONTENTS
www.kaymar.com.au
Check our website for the current distributor listing.
Distributors with a ‘D’ next to their listing have demonstration products in their stores.
Kaymar design and manufacture Rear Bars, Spare Wheel Carriers, Jerry Can Holders and
Accessories in Australia.
Widely recognised as the world’s foremost innovator of rear end accessories for 4x4
vehicles with Kaymar products are now exported from our Lilydale plant across the world
- USA, Russia, Europe, South America, Middle East, Asia, Africa and the South Pacific.
International distributors serve more than 15 countries.
The greater demands of off road and long haul use requires the replacement
of some of the more cosmetic fittings with harder wearing and more practical
accessories.
Replacement of the standard rear bumper with a Kaymar bar/step carrier system
improves several aspects of a vehicle’s performance configuration and overall
carrying practicality.
Australian owned
More than 30 years proven design and manufacturing excellence and reliability
building rear bars and accessories for outback travellers throughout Australia and
now exporting across the world.
Protection and clearance
Beginning with toughening the rear end of a vehicle with steel protection the
replacement bars are also designed to maximise the departure angle clearance - in
most instances improving it over a factory standard vehicle.
Spare wheel capacity
Two carrier pivots are provided on all replacement bars enabling the fitting of two
swing open carriers for carrying a combination of spare wheels and/or jerry cans depending on the vehicle body style. The ability to safely carry and easily access
multiple spare wheels can be a life saver for bush drivers.
www.kaymar.com.au
BACK TO CONTENTS
October 11, 2016 12:17 PM
Page 5
NEXT PAGE
Design and manufacture
OPERATION AND MAINTENANCE OF YOUR CARRIER
Designed and manufactured in Australia.
Throughout this maintenance information sheet reference to carrier covers both the Kaymar spare
Each bar in the product range is custom designed at Kaymar’s plant in Lilydale,
Victoria to suit specific vehicle models ensuring the most effective fit to the body
style and importantly to gain the maximum mounting strength by matching the
bar fixing brackets to all available chassis mounting points. Working prototypes are
thoroughly road tested and load approved ahead of going into production.
wheel carrier and the Kaymar jerry can holder (single or double).
NEVER TRAVEL WITH THE CARRIER OPEN.
NEVER TRAVEL WITH THE TELESCOPIC LIGHT IN THE ‘UP’ POSITION
Precision
After you carrier has been fitted to your 4wd, check the following and then use this information for
The manufacturing process involves robotic welding stations, high tech laser cutters
and expert operators, welders and finishers to turn out precision made product
every time.
Finishing
Completion of every bar includes a comprehensive process of grinding and sanding
to smooth all joints and edges followed by a quality inspection before heading into
the protective zinc electroplating.
External finishing is completed by powder coating.
Finished products are protectively wrapped then packed into custom made Kaymar
shipping cartons.
maintenance purposes:1. When closing the handle of the carrier, the handle should ‘snap’ shut of its own accord
after you have physically closed the handle at least half way to the shut position. The
picture below shows the handle fitted to the correct measurement.
2. Look at the rear of the carrier, check that the lock tab washers have been bent down firmly
onto the heads of the two large bolts which hold the wheel mount onto the top of the
carrier. Picture below.
3. Check that the rear of the tyre is pressing firmly against the wheel carrier frame. No larger
than 33” diameter tyre is recommended.
4.
If you own a Discovery 3 or 4 and your vehicle is a sensor model, check the sensor shield
has been fitted correctly. Ensure that if you have removed your wheel from the carrier, you
remove the sensor sheild also. The shield should fit snugly against the underside of the
• Lock handles are rubber coated for comfort and safety.
tyre. Picture below.
• Carriers are fitted with stainless steel gas struts to assist opening and hold open.
5. A padlock should be fitted to the lock tab protruding through the rear of the wheel mount.
• Heavy duty pivot points and carrier bearings.
If a padlock is fitted, it must be cable tied to the main upright of the carrier to prevent it
moving. Padlocks on jerry can holders, can be tied through the holes provided.
Features
• Over centre carrier locks for positive, secure locking in all conditions.
• ADR approved LED signal lights fitted to all bars.
6. When opening carrier, hold the tyre or jerry can holder and allow it to open slowly. Do not
• Accessory mounting for aerials, jacks and worklight.
• Integral HiLift jack points provided.
let it slam open against the stop.
7. The pivot bearings should have been greased when your carrier was fitted, and the top dust
• Where fitted tow bars are tested and approved to match the vehicle ratings.
cap filled with grease. The bearings must be checked, cleaned and re-greased at least every
12 months and especially after a desert trip. Upon re-assembly, the dust cap on top of the
housing MUST be COMPLETELY filled with grease.
8. If you have a number plate located in the centre of your carrier, ensure the number plate is
adjusted in to press against the tyre.
9. Read the warranty information provided and store this information together with the fitting
BACK
October 11, 2016 12:17 PM
Page 6 BACK TO CONTENTS
www.kaymar.com.au
cd safely for future use.
www.kaymar.com.au
BACK TO CONTENTS
October 11, 2016 12:17 PM
Page 7
NEXT PAGE
Kaymar 4WD Accessories for
TOYOTA
LC200
Pre Aug 2015
TOYOTA
LC200 Pre
Aug 2015
LANDCRUISER 200 VX and SAHARA with SENSORS STANDARD CARRIERS
NOT AVAILABLE DUE TO SENSORS
LANDCRUISER 200 GXL NO SENSORS
STANDARD CARRIERS
K20010L
LHS Standard Carrier Alloy
$1,406.00
K20010R
RHS Standard Carrier Alloy
$1,406.00
K20015L
LHS Standard Double Jerry Can Holder $1,406.00
K20015R
RHS Standard Double Jerry Can Holder $1,406.00
KIT200-STD
LHS Standard Carrier Alloy, RHS Standard Carrier Alloy
$2,666.00
KIT200-STDL-JC
LHS Standard Carrier Alloy, RHS Standard Double Jerry Can Holder $2,666.00
KIT200-STDR-JC
RHS Standard Carrier Alloy, LHS Standard Double Jerry Can Holder $2,666.00
K20010R_GXL
K20010L_GXL
Landcruiser 200 Series with Twin Wheel Carrier kit on Sandover Highway, Western Australia
KIT200-STD
BACK
October 11, 2016 12:17 PM
www.kaymar.com.au
www.kaymar.com.au
BACK TO CONTENTS
October 11, 2016 12:17 PM
Page 9
NEXT PAGE
TOYOTA
LC200 Pre
Aug 2015
TOYOTA
LC200 Pre
Aug 2015
LANDCRUISER 200 GX NO SENSORS
STANDARD CARRIERS
K20012L
LHS Standard Carrier Steel
$1,406.00
K20012R
RHS Standard Carrier Steel
$1,406.00
K20017L
K20017R
KITGX200-STD
LHS Standard Carrier Steel, RHS Standard Carrier Steel
$2,666.00
KITGX200-STDL-JC
LHS Standard Carrier Steel, RHS Standard Double Jerry Can Holder $2,666.00
KITGX200-STDR-JC
RHS Standard Carrier Steel, LHS Standard Double Jerry Can Holder $2,666.00
K20015R
K20012L GX
K20012R GX
K20015L
KITGX200-STD
BACK
October 11, 2016 12:17 PM
www.kaymar.com.au
www.kaymar.com.au
BACK TO CONTENTS
October 11, 2016 12:17 PM
Page 11
NEXT PAGE
TOYOTA
LC200 Pre
Aug 2015
TOYOTA
LC200 Pre
Aug 2015
LANDCRUISER 200 VX and SAHARA with SENSORS
K20000-S
REAR BAR
Sensor Bar, Light Mounts - Lights Supplied. Comprises K20005, K6123-Kit
$1,476.00
K20005-S
Sensor Bar, Light Mounts - No lights
$1,406.00
K20000S
K20017R
KIT200-S
REAR BAR KITS
Sensor Bar, Light Mounts - Lights Supplied, LHS Carrier Alloy, RHS Carrier Alloy
KIT200L-S-JC
KIT200R-S-JC
$4,116.00
Sensor Bar, Light Mounts - Lights Supplied, LHS Carrier Alloy, RHS Double Jerry Can Holder
$4,116.00
Sensor Bar, Light Mounts -Lights Supplied, RHS Carrier Alloy, LHS Double Jerry Can Holder
$4,116.00
K20017L
KIT200-S
BACK
October 11, 2016 12:17 PM
www.kaymar.com.au
www.kaymar.com.au
BACK TO CONTENTS
October 11, 2016 12:17 PM
Page 13
NEXT PAGE
TOYOTA
LC200 Pre
TOYOTA
LC200 Pre
Aug 2015
REAR BAR
Aug 2015
REAR BAR
K20000
Bar, Light Mounts – Lights Supplied (comprises K20005, K6121-Kit)
$1,476.00
K20000
$1,476.00
K20005
Bar, Light Mounts – No Lights Supplied
$1,406.00
K20005
$1,406.00
K20000
K20000
KIT200
REAR BAR KITS
Bar, Light Mounts – Lights Supplied, LHS Carrier Alloy, RHS Carrier Alloy
$4,116.00
KIT200L-JC
KIT200R-JC
Bar, Light Mounts – Lights Supplied, LHS Carrier Alloy, RHS Double Jerry Can Holder $4,116.00
Bar, Light Mounts – Lights Supplied, RHS Carrier Alloy LHS Double Jerry Can Holder
$4,116.00
KITGX200
REAR BAR KITS
Bar, Light Mounts – Lights Supplied, LHS Carrier Steel, RHS Carrier Steel
KITGX200L-JC
KITGX200R-JC
$4,116.00
Bar, Light Mounts – Lights Supplied, LHS Carrier Steel RHS Double Jerry Can Holder
$4,116.00
Bar, Light Mounts – Lights Supplied, RHS Carrier Steel, LHS Double Jerry Can Holder
$4,116.00
KIT200
KITGX200
BACK
October 11, 2016 12:17 PM
www.kaymar.com.au
www.kaymar.com.au
BACK TO CONTENTS
October 11, 2016 12:17 PM
Page 15
NEXT PAGE
TOYOTA
LC200 Pre
TOYOTA
LC200 Pre
Aug 2015
CARRIERS FOR REAR BAR
Aug 2015
K20020L
LHS Carrier Alloy – No Lights Supplied
$1,312.00
K20020L
$1,312.00
K20020R
RHS Carrier Alloy – No Lights Supplied
$1,312.00
K20020R
$1,312.00
K20025L
LHS Double Jerry Can Holder – No lights Supp
$1,312.00
K20025L
$1,312.00
K20025R
RHS Double Jerry Can Holder – No lights Supp
$1,312.00
K20025R
$1,312.00
K20020L_GXL
K20020L_GXL
K20020R_GXL
K20025R
K20025R
K20025L
K20025L
BACK
October 11, 2016 12:17 PM
K20020R_GXL
www.kaymar.com.au
www.kaymar.com.au
BACK TO CONTENTS
October 11, 2016 12:17 PM
Page 17
NEXT PAGE
TOYOTA
LC200 Pre
TOYOTA
LC200 Pre
Aug 2015
Aug 2015
ACCESSORIES
K20022L
LHS Carrier Steel – No Lights Supplied
$1,312.00
K0440
Jack Holder Alloy Wheels
$179.00
K20022R
RHS Carrier Steel – No Lights Supplied
$1,312.00
K0440NP
Jack Holder (NP) Alloy Wheels
$200.00
K20027L
$1,312.00
K0441
Jack Holder Steel Wheels
$179.00
K20027R
$1,312.00
K0441NP
Jack Holder (NP) Steel Wheels
$200.00
K0473
H/F Aerial Bracket Alloy Wheels
$200.00
K0473NP
H/F Aerial Bracket (NP) Alloy Wheels $228.00
K0500LED
Telescopic Light
$260.00
K20008L
Reflector Insert Bracket LHS
$56.00
K20008R
Reflector Insert Bracket RHS
$56.00
K0440NP
K20022L_GX
K20022R_GX
K0441NP
K0441
K0440
ACCESSORIES
ACCESSORIES
K0441
$179.00
K0441NP
$200.00
K0500LED
Telescopic Light
$260.00
K20008L
$56.00
K20008R
$56.00
K20027R
K20008R/L
K0441NP
K20027L
BACK
October 11, 2016 12:17 PM
K0500LED
K0441
www.kaymar.com.au
www.kaymar.com.au
BACK TO CONTENTS
October 11, 2016 12:17 PM
Page 19
NEXT PAGE
TOYOTA
LC200 Pre
TOYOTA
LC200 Pre
Aug 2015
LOCK PLATES
K0116-Kit
Lock Plate Kit Alloy wheels
K0116NP-Kit
Lock Plate (NP) Kit Alloy Wheels with NP Bkt
K0117-Kit
Lock Plate Kit Steel wheels
K0117NP-Kit
Lock Plate (NP) Kit Steel Wheels with NP Bkt
Aug 2015
WIRING LOOM/CAMERA KIT
$86.00
K6111
Toyota Factory Trailer Wiring Loom – Pre Aug 09
$242.00
$167.00
K6111-1
Toyota Factory Trailer Wiring Loom – After Aug 09
$242.00
$86.00
K6305-Kit
Reversing Camera Kit - Camera loom, Camera bracket & bolts
$330.00
$168.00
K6111
K0116-KIT
K0116NP-KIT
LOCK PLATES
K0116-Kit
K0116NP-Kit
K0117-Kit
K0117NP-Kit
$86.00
$167.00
K6111
Toyota Factory Trailer Wiring Loom – Pre Aug 09
$242.00
K6111-1
$242.00
K6305-Kit
$330.00
$86.00
$168.00
K0117-KIT
K6111-1
LOCK PLATES
K0116-Kit
K0116NP-Kit
K0117-Kit
K0117NP-Kit
$86.00
K6111-1
$242.00
$167.00
K6305-Kit
$330.00
$86.00
$168.00
K6305-KIT
K0117NP-KIT
BACK
October 11, 2016 12:17 PM
www.kaymar.com.au
www.kaymar.com.au
BACK TO CONTENTS
October 11, 2016 12:17 PM
Page 21
NEXT PAGE
TOYOTA
LC200
post Aug 2015
TOYOTA
LC200 Post
Aug 2015
LANDCRUISER 200 VX and SAHARA 2015 with SENSORS STANDARD CARRIERS
NOT AVAILABLE DUE TO SENSORS
LANDCRUISER 200 GXL 2015 NO SENSORS
STANDARD CARRIERS
K20013L
LHS Standard Carrier Alloy
$1,406.00
K20013R
RHS Standard Carrier Alloy
$1,406.00
K20018L
K20018R
KIT200FLGXL-STD
LHS Standard Carrier Alloy, RHS Standard Carrier Alloy
$2,666.00
KIT200FLGXL-STDL-JC LHS Standard Carrier Alloy, RHS Standard Double Jerry Can Holder $2,666.00
KIT200FLGXL-STDR-JC RHS Standard Carrier Alloy, LHS Standard Double Jerry Can Holder $2,666.00
K20013R_GXL
K20013L_GXL
Landcruiser 200 Series 2015 facelift with Wheel and Jerry Can Carrier kit
KITFLGXL200-STD
BACK
October 11, 2016 12:17 PM
www.kaymar.com.au
www.kaymar.com.au
BACK TO CONTENTS
October 11, 2016 12:17 PM
Page 23
NEXT PAGE
TOYOTA
LC200 Post
Aug 2015
TOYOTA
LC200 Post
Aug 2015
LANDCRUISER 200 GX NO SENSORS (same as pre 2015)
STANDARD CARRIERS
K20012L
LHS Standard Carrier Steel
$1,406.00
K20012R
RHS Standard Carrier Steel
$1,406.00
K20017L
K20017R
KITGX200-STD
LHS Standard Carrier Steel, RHS Standard Carrier Steel
$2,666.00
KITGX200-STDL-JC
LHS Standard Carrier Steel, RHS Standard Double Jerry Can Holder $2,666.00
KITGX200-STDR-JC
RHS Standard Carrier Steel, LHS Standard Double Jerry Can Holder $2,666.00
K20018R
K20012L GX
K20012R GX
K20018L
KITGX200-STD
BACK
October 11, 2016 12:17 PM
www.kaymar.com.au
www.kaymar.com.au
BACK TO CONTENTS
October 11, 2016 12:17 PM
Page 25
NEXT PAGE
TOYOTA
LC200 Post
Aug 2015
TOYOTA
LC200 Post
Aug 2015
LANDCRUISER 200FL VX and SAHARA 2015 with SENSORS
K20100-S
REAR BAR
Sensor Bar, Light Mounts - Lights Supplied. Comprises K20006-S, K6123-Kit
$1,476.00
K20105-S
Sensor Bar, Light Mounts - No lights
$1,406.00
K20100S
K20026R
LANDCRUISER 200 VX and SAHARA 2015 with SENSORS
KIT200-FLVX
REAR BAR KITS
Sensor Bar, Light Mounts - Lights Supplied, LHS Carrier Alloy, RHS Carrier Alloy
KIT200FLVXL-S-JC
KIT200FLVXR-S-JC
$4,116.00
Sensor Bar, Light Mounts - Lights Supplied, LHS Carrier Alloy, RHS Double Jerry Can Holder
$4,116.00
Sensor Bar, Light Mounts -Lights Supplied, RHS Carrier Alloy, LHS Double Jerry Can Holder
$4,116.00
K20026L
KIT200FLVX
BACK
October 11, 2016 12:17 PM
www.kaymar.com.au
www.kaymar.com.au
BACK TO CONTENTS
October 11, 2016 12:17 PM
Page 27
NEXT PAGE
TOYOTA
LC200 Post
TOYOTA
LC200 Post
Aug 2015
REAR BAR
Aug 2015
REAR BAR
K20000
$1,476.00
K20000
$1,476.00
K20005
$1,406.00
K20005
$1,406.00
K20000
K20000
KIT200FLGXL
REAR BAR KITS
Bar, Light Mounts – Lights Supplied, LHS Carrier Alloy, RHS Carrier Alloy
$4,116.00
KIT200FLGXL-L-JC
KIT200FLGXL-R-JC
Bar, Light Mounts – Lights Supplied, LHS Carrier Alloy, RHS Double Jerry Can Holder $4,116.00
Bar, Light Mounts – Lights Supplied, RHS Carrier Alloy LHS Double Jerry Can Holder
$4,116.00
KITGX200
REAR BAR KITS
Bar, Light Mounts – Lights Supplied, LHS Carrier Steel, RHS Carrier Steel
KITGX200L-JC
KITGX200R-JC
$4,116.00
Bar, Light Mounts – Lights Supplied, LHS Carrier Steel RHS Double Jerry Can Holder
$4,116.00
Bar, Light Mounts – Lights Supplied, RHS Carrier Steel, LHS Double Jerry Can Holder
$4,116.00
KIT200FLGXL
KITGX200
BACK
October 11, 2016 12:17 PM
www.kaymar.com.au
www.kaymar.com.au
BACK TO CONTENTS
October 11, 2016 12:17 PM
Page 29
NEXT PAGE
TOYOTA
LC200 Post
TOYOTA
LC200 Post
Aug 2015
Aug 2015
K20023L
$1,312.00
K20023L
$1,312.00
K20023R
$1,312.00
K20023R
$1,312.00
K20026L
$1,312.00
K20026L
$1,312.00
K20026R
$1,312.00
K20026R
$1,312.00
K20023L
K20023L
K20023R
K20023R
K20026R
K20026R
K20026L
K20026L
BACK
October 11, 2016 12:17 PM
www.kaymar.com.au
www.kaymar.com.au
BACK TO CONTENTS
October 11, 2016 12:17 PM
Page 31
NEXT PAGE
TOYOTA
LC200 Post
TOYOTA
LC200 Post
Aug 2015
K20022L
LHS Carrier Steel – No Lights Supplied
$1,312.00
K20022R
RHS Carrier Steel – No Lights Supplied
$1,312.00
K20027L
$1,312.00
K20027R
$1,312.00
Aug 2015
ACCESSORIES
ACCESSORIES
K0442
$179.00
K0442NP
$200.00
K0441
$179.00
K0441NP
$200.00
K0475
H/F Aerial Bracket Alloy Wheels
$200.00
K0475NP
H/F Aerial Bracket (NP) Alloy Wheels K0500LED
Telescopic Light
K20009L
$56.00
K20009R
$56.00
$228.00
K0475NP
$260.00
K0475
K20022L_GX
K20022R_GX
K0441NP
K0442
K0441
K0442NP
(same as pre 2015)
ACCESSORIES
K0441
$179.00
K0441NP
$200.00
K0500LED
Telescopic Light
$260.00
K20008L
$56.00
K20008R
$56.00
K20027R
K20008R/L
K0441NP
K0441
K20027L
BACK
October 11, 2016 12:17 PM
www.kaymar.com.au
www.kaymar.com.au
BACK TO CONTENTS
K0500LED
October 11, 2016 12:17 PM
Page 33
NEXT PAGE
TOYOTA
LC200 Post
TOYOTA
LC200 Post
Aug 2015
LOCK PLATES
K0183-Kit
K0183NP-Kit
K0117-Kit
K0117NP-Kit
Aug 2015
$86.00
K6111-1
$242.00
$167.00
K6304-Kit
$363.00
$86.00
$168.00
K6111-1
$242.00
K6304-Kit
$363.00
K0183-KIT
K0183NP-KIT
LOCK PLATES
K0183-Kit
K0183NP-Kit
K0117-Kit
K0117NP-Kit
$86.00
$167.00
$86.00
$168.00
K6111-1
K0117-KIT
LOCK PLATES
K0116-Kit
K0116NP-Kit
K0117-Kit
K0117NP-Kit
$86.00
K6111-1
$242.00
$167.00
K6305-Kit
$330.00
$86.00
$168.00
K6305-KIT
K0117NP-KIT
BACK
October 11, 2016 12:17 PM
www.kaymar.com.au
www.kaymar.com.au
BACK TO CONTENTS
October 11, 2016 12:17 PM
Page 35
NEXT PAGE
TOYOTA
LC100
TOYOTA
LC100
LANDCRUISER 100 LIVE AXLE
STANDARD CARRIERS
K1150
Standard Carrier LHS (Steel Wheels)
$1,178.00
K1150A
Standard Carrier LHS (Alloy Wheels)
$1,178.00
K1160
Standard Carrier RHS (Steel Wheels)
$1,178.00
K1150A
K1150
LandCruiser 100 with Replacement Bar and Jerry Can Holder & Wheel Carrier Kit
BACK
October 11, 2016 12:17 PM
www.kaymar.com.au
K1160
www.kaymar.com.au
BACK TO CONTENTS
October 11, 2016 12:17 PM
Page 37
NEXT PAGE
TOYOTA
LC100
TOYOTA
LC100
LANDCRUISER 100 IFS TURBO DIESEL, LEXUS & V8
STANDARD CARRIERS
K1120
$1,178.00
K1120A
$1,178.00
K3415U
REAR BAR
Twin Pivots LIB
$2,242.00
K3415U
K1120
KIT100U-LA
REAR BAR KITS
Twin Pivots LIB, LHS Carrier (steel wheels), RHS Carrier (steel wheels)
$3,650.00
KIT100U-LA
K1120A
BACK
October 11, 2016 12:17 PM
www.kaymar.com.au
www.kaymar.com.au
BACK TO CONTENTS
October 11, 2016 12:17 PM
Page 39
NEXT PAGE
TOYOTA
LC100
TOYOTA
LC100
REAR BAR KITS
KIT100U-LA-L-JCD
Twin Pivots LIB, LHS Carrier (steel wheels), RHS Double Jerry Can Holder
$3,750.00
KIT100U-LA-R-JCD
Twin Pivots LIB, RHS Carrier (steel wheels), LHS Double Jerry Can Holder
$3,750.00
K3435U
REAR BAR
Twin Pivots LIB
$2,373.00
K3435U
REAR BAR KITS
KIT100U-IFS
$3,800.00
KIT100U-IFS-L-JCD
$3,900.00
KIT100U-IFS-R-JCD
Twin Pivots LIB, RHS Carrier (steel wheels), LHS Double Jerry Can Holder
$3,900.00
KIT100U-LA-L-JCD
KIT100U-IFS
KIT100U-LA-R-JCD
BACK
October 11, 2016 12:17 PM
www.kaymar.com.au
www.kaymar.com.au
BACK TO CONTENTS
October 11, 2016 12:17 PM
Page 41
NEXT PAGE
TOYOTA
LC100
TOYOTA
LC100
K8020UL
LHS Carrier (Steel Wheels) *may need NP bracket
$766.00
K8020UR
RHS Carrier (Steel Wheels) *may need NP bracket
$766.00
K1058
LHS Double Jerry Can Holder
$905.00
K1064
RHS Double Jerry Can Holder
$905.00
KIT100U-IFS-L-JCD
K1064
K1058
KIT100U-IFS-R-JCD
K8020UR
K8020UL
BACK
October 11, 2016 12:17 PM
www.kaymar.com.au
www.kaymar.com.au
BACK TO CONTENTS
October 11, 2016 12:17 PM
Page 43
NEXT PAGE
TOYOTA
LC100
TOYOTA
LC100
LOCK PLATES
K8040UL
$766.00
K0175-Kit
Lock Plate Kit Factory Alloy
K8040UR
$766.00
K0175NP-Kit
Lock Plate (NP) Kit Factory Alloy with NP bracket
$100.00
K1058
$905.00
K0178-Kit
Lock Plate Kit Snowy
$168.00
K1064
$905.00
K0178NP-Kit
Lock Plate (NP) Kit Snowy with NP bracket
$182.00
K0170-Kit
Lock Plate Kit Steel Wheels
$108.00
K0170NP-Kit
Lock Plate Kit Steel Wheels with NP bracket
$119.00
$90.00
K0170NP-KIT
K0170-KIT
K8040UL
K8040UR
K0175-KIT
K0175NP-KIT
K1058
K0178-KIT
K0178NP-KIT
K1064
BACK
October 11, 2016 12:17 PM
www.kaymar.com.au
www.kaymar.com.au
BACK TO CONTENTS
October 11, 2016 12:17 PM
Page 45
NEXT PAGE
TOYOTA
LC100
TOYOTA
LC100
LOCK PLATES
ACCESSORIES
K0169-Kit
$95.00
K0480
$179.00
K0169NP-Kit
$196.00
K0480NP
$200.00
K0167-Kit
Lock Plate Kit ‘60 TZ’ Alloy (Sahara – Kakadu)
$96.00
K0485
Jack Holder Factory Alloy Wheels
$179.00
K0167NP-Kit
Lock Plate (NP) Kit ’60 TZ’ Alloy (Sahara –Kakadu) with NP bracket
$179.00
K0485NP
Jack Holder (NP) Factory Alloy Wheels
$200.00
K0168-Kit
$108.00
K0470.005
H/F Aerial Bracket Steel Wheels
$200.00
K0168NP-Kit
Lock Plate (NP) Kit Steel Wheels
$119.00
K0470NP.005
H/F Aerial Bracket (NP) Steel Wheels
$228.00
K0470.006
H/F Aerial Bracket Factory Alloy Wheels
$200.00
K0470NP.006
H/F Aerial Bracket (NP) Factory Alloy Wheels
$228.00
K6217
H/F Aerial Bracket suit Horizontal arm of Carrier (LHS or RHS)
$190.00
K0500LED
Telescopic Light
$260.00
K0167-KIT
K0480NP
K0167NP-KIT
K0480
K0485NP
K0485
K0168-KIT
K0168NP-KIT
K0470NP.005
K0470.005
K0169-KIT
K0169NP-KIT
K06217
K0470NP.006
BACK
October 11, 2016 12:17 PM
www.kaymar.com.au
www.kaymar.com.au
K0470.006
BACK TO CONTENTS
October 11, 2016 12:17 PM
K0500LED
Page 47
NEXT PAGE
TOYOTA
LC100
ACCESSORIES
K0486
$179.00
K0486NP
$200.00
K0487
$179.00
K0487NP
$200.00
K0488
Jack Holder ’60 TZ’ Alloy (Sahara – Kakadu)
$179.00
K0488NP
Jack Holder (NP) ’60 TZ’ Alloy (Sahara – Kakadu)
$200.00
K0493
H/F Aerial Bracket suit LHS Carrier only
$106.00
K0490
H/F Aerial Bracket suit RHS Carrier only
$106.00
K0500LED
Telescopic Light
$260.00
TOYOTA
LC80
K0486
K0486NP
K0487
K0487NP
K0488
K0488NP
K0493
BACK
October 11, 2016 12:17 PM
K0490
Landcruiser 80 Series with Twin Wheel Carrier kit
K0500LED
www.kaymar.com.au
www.kaymar.com.au
BACK TO CONTENTS
October 11, 2016 12:17 PM
Page 49
NEXT PAGE
TOYOTA
Lc80
TOYOTA
Lc80
LANDCRUISER 80 GXL
STANDARD CARRIER
K1100
$1,140.00
K1100A
$1,140.00
K1110
$1,140.00
LANDCRUISER 80 STD and RV
LANDCRUISER 80 GXL
K1030U
REAR BAR
Twin Pivots Upgrade LIB
$1,811.00
STANDARD CARRIER
K1100
$1,140.00
K1100A
$1,140.00
K1110
$1,140.00
K1030U
LANDCRUISER 80 GXL
KIT80U
REAR BAR KITS
Twin Pivots Upgrade LIB, LHS Carrier (steel wheels), RHS Carrier (steel wheels)
$3,220.00
K1110
K1100
KIT80U
K1100A
BACK
October 11, 2016 12:17 PM
www.kaymar.com.au
www.kaymar.com.au
BACK TO CONTENTS
October 11, 2016 12:17 PM
Page 51
NEXT PAGE
TOYOTA
Lc80
TOYOTA
Lc80
LANDCRUISER 80 GXL
KIT80U-L-JCD
REAR BAR KITS
Twin Pivots Upgrade LIB, LHS Carrier (steel wheels), RHS Dble Jerry Can
$3,320.00
KIT80U-R-JCD
REAR BAR
K1030U
$1,811.00
K6025U
Wing Extensions
$60.00
Twin Pivots Upgrade LIB, RHS Carrier (steel wheels), LHS Dble Jerry Can
$3,320.00
K1030U
K6025U
KIT80U-L-JCD
REAR BAR KITS
KIT80U + K6025U
Twin Pivots Upgrade LIB, Wing Extensions, LHS Wheel Carrier (steel wheels), RHS Wheel Carrier (steel wheels)
$3,283.00
KIT80U-L-JCD + K6025U
Twin Pivots Upgrade LIB, Wing Extensions, LHS Wheel Carrier (steel wheels), RHS Dbl Jerry Can
$3,383.00
KIT80U-R-JCD + K6025U
Twin Pivots Upgrade LIB, Wing Extensions, RHS Wheel Carrier (steel wheels), LHS Dbl Jerry Can
$3,383.00
KIT80U + K6025U
K6025U
KIT80U-R-JCD
BACK
October 11, 2016 12:17 PM
www.kaymar.com.au
www.kaymar.com.au
BACK TO CONTENTS
October 11, 2016 12:17 PM
Page 53
NEXT PAGE
TOYOTA
Lc80
TOYOTA
Lc80
KIT80U-L-JCD
LANDCRUISER 80 GXL
K8130L
$766.00
K8130R
$766.00
K1058
$905.00
K1064
$905.00
K1064
K6025U
K1058
KIT80U-R-JCD
K8130R
K6025U
BACK
October 11, 2016 12:17 PM
www.kaymar.com.au
K8130L
www.kaymar.com.au
BACK TO CONTENTS
October 11, 2016 12:17 PM
Page 55
NEXT PAGE
TOYOTA
Lc80
TOYOTA
Lc80
LANDCRUISER 80 GXL
LOCK PLATES
LOCK PLATES
K0100-Kit-Toy
Lock Plate Kit Factory Alloy $102.00
K0110-Kit
Lock Plate Kit Factory Alloy to mid 93
$102.00
K0100NP-Kit-Toy
Lock Plate (NP) Kit Factory Alloy with NP bracket $113.00
K0110NP-Kit
Lock Plate (NP) Factory Alloy to mid 93
$113.00
K0160-Kit
$86.00
K0160NP-Kit
Lock Plate (NP) Kit Steel Wheels with NP bracket
$168.00
K0100-KIT-TOY
K0110-KIT
K0100NP-KIT-TOY
LANDCRUISER 80 GXL
ACCESSORIES
K0300
$179.00
K0300NP
$200.00
K0400
$179.00
K0400NP
$200.00
K0410
Jack Holder to mid 93 Factory Alloy Wheels
$179.00
K0410NP
Jack Holder (NP) to mid 93 Factory Alloy Wheels
$200.00
K0470
$200.00
K0470NP
$228.00
K0470.002
$200.00
K0470NP.002
$228.00
K0490
$106.00
K0493
H/F Aerial Bracket suit LHS Carrier only
$106.00
K0500LED
Telescopic Light
$260.00
K0110NP-KIT
K0160NP-KIT
K0493
K0160-KIT
K0490
K0300
K0300NP
K0470
K0470.002
K0400.psd
K0400NP
K0470NP.002
BACK
October 11, 2016 12:17 PM
K0410
www.kaymar.com.au
www.kaymar.com.au
BACK TO CONTENTS
K0500LED
K0410NP
October 11, 2016 12:17 PM
Page 57
NEXT PAGE
TOYOTA
TOYOTA
Lc78
LANDCRUISER 78 TROOP CARRIER
K1280
LC78
REAR BAR
Twin Pivots Deluxe LIB
$1,929.00
K1280
REAR BAR KITS
KIT78D
Twin Pivots Deluxe LIB, $3,350.00
KIT78D-R-JCD
Twin Pivots Deluxe LIB,
$3,450.00
Landcruiser 78 Series with bar and Single Wheel Carrier
KIT78D
BACK
October 11, 2016 12:17 PM
www.kaymar.com.au
www.kaymar.com.au
BACK TO CONTENTS
* sold separately
October 11, 2016 12:17 PM
Page 59
NEXT PAGE
TOYOTA
Lc78
TOYOTA
Lc78
LOCK PLATES
K0175-Kit
Lock Plate Kit Factory Alloy – not V8
$90.00
K0175NP-Kit
Lock Plate (NP) Kit Factory Alloy with NP bracket – Not V8
K0176-Kit
Lock Plate Kit V8 Factory Alloy
K0176NP-Kit
Lock Plate (NP) V8 Factory Alloy with NP bracket
$197.00
K0170-Kit
$108.00
K0170NP-Kit
$119.00
$100.00
$95.00
KIT78D-R-JCD
K0170-KIT
K8105L
$766.00
K8105R
$766.00
K1058
$905.00
K0175-KIT
K0170NP-KIT
K0175NP-KIT
K1058
K0176-KIT
K8105R
K8105L
BACK
October 11, 2016 12:17 PM
K0176NP-KIT
www.kaymar.com.au
www.kaymar.com.au
BACK TO CONTENTS
October 11, 2016 12:17 PM
Page 61
NEXT PAGE
TOYOTA
Lc78
ACCESSORIES
K0491
Jack Holder suit RHS Carrier only
$89.00
K0490
$106.00
K0500LED
Telescopic Light
$260.00
K5052
Jack Holder WOD Split Rims
$200.00
K5053
Jack Holder WOD Steel Wheels
$200.00
K7124
Wheel on door Extension bracket
$125.00
K7125
H/F bracket to suit K7124
$117.00
K6114
Wiring Loom – Suit 78 Series V8 only
$70.00
TOYOTA
LC76
K6114
K0491
K0490
K7125
K5053
K7124
K5052
K0500LED
BACK
October 11, 2016 12:17 PM
www.kaymar.com.au
Landcruiser 76 Series with JCD kit
www.kaymar.com.au
BACK TO CONTENTS
October 11, 2016 12:17 PM
Page 63
NEXT PAGE
TOYOTA
Lc76
TOYOTA
Lc76
LANDCRUISER 76 WAGON GXL
K1235
REAR BAR
Twin Pivots LIB
$1,929.00
LANDCRUISER 76 WAGON WORKMATE
K1235
REAR BAR
Twin Pivots LIB inc Workmate Wings
$2,062.00
K1235
K1235
K6026
REAR BAR KITS
KIT76
Twin Pivots LIB, LHS Carrier - Alloy Wheels, RHS Carrier - Alloy Wheels
$3,350.00
KIT76-R-JCD
Twin Pivots LIB, RHS Carrier - Alloy Wheels, LHS Dble Jerry Can Holder
$3,450.00
KIT76
KIT76-W
Twin Pivots LIB, Workmate Wings, LHS Carrier - Steel Wheels, RHS Carrier - Steel Wheels
$3,420.00
KIT76-W-R-JCD
Twin Pivots LIB, Workmate Wings, RHS Carrier - Steel Wheels, RHS Double Jerry Can Holder
$3,520.00
KIT76-W
KIT76-R-JCD
BACK
October 11, 2016 12:17 PM
Page 64 REAR BAR KITS
KIT76-W-R-JCD
BACK TO CONTENTS
www.kaymar.com.au
www.kaymar.com.au
BACK TO CONTENTS
October 11, 2016 12:17 PM
Page 65
NEXT PAGE
TOYOTA
Lc76
TOYOTA
Lc76
K8100L
LHS Carrier (Alloy Wheels) *may need NP bracket
$766.00
K8105L
$766.00
K8100R
RHS Carrier (Alloy Wheels) *may need NP bracket
$766.00
K8105R
$766.00
K1058
$905.00
K1058
$905.00
K8105R
K1058
K8105L
K0170-Kit
$108.00
K0170NP-Kit
$119.00
K0176-Kit
Lock Plate Kit Factory alloy Wheels
$95.00
K0176NP-Kit
Lock Plate (NP) Kit Factory Alloy Wheels with NP bracket
$108.00
K0170NP-Kit
$119.00
K0176-Kit
Lock Plate Kit Factory alloy Wheels
$95.00
K0176NP-Kit
Lock Plate (NP) Kit Factory Alloy Wheels with NP bracket
K8100R
www.kaymar.com.au
LOCK PLATES
K0170-Kit
K0176-KIT
October 11, 2016 12:17 PM
$197.00
K8100L
BACK
LOCK PLATES
www.kaymar.com.au
K0170-KIT
BACK TO CONTENTS
$197.00
K0170NP-KIT
October 11, 2016 12:17 PM
Page 67
NEXT PAGE
TOYOTA
Lc76
ACCESSORIES
K0490
$106.00
K0491
Jack Holder $89.00
K0500LED
Telescopic Light
$260.00
K7124
WOD Extension Bracket
$125.00
K7125
WOD H/F Bracket Suit K7120 only
$117.00
K5052
WOD Centre Jack Holder Steel only
$200.00
K0470.024
WOD Centre H/F Aerial Bracket
$TBA
TOYOTA
LC75
K0176NP-KIT
K7124
K5052
K0470.024
ACCESSORIES
K0490
$106.00
K0500LED
Telescopic Light
$260.00
K7124
$125.00
K7125
$117.00
K5053
WOD Centre Jack Holder Steel only
$200.00
K0470.025
WOD Centre H/F Aerial Bracket
$TBA
K7125
K5053
BACK
October 11, 2016 12:17 PM
K0470.025
Page 68 K0500LED
BACK TO CONTENTS
K0491
K0490
www.kaymar.com.au
www.kaymar.com.au
BACK TO CONTENTS
October 11, 2016 12:17 PM
Page 69
NEXT PAGE
TOYOTA
Lc75
TOYOTA
Lc75
K1280
REAR BAR
Twin Pivots Deluxe LIB
$1,929.00
K1280
KIT75D-R-JCD
REAR BAR KITS
KIT75D
$3,350.00
KIT75D-R-JCD
$3,450.00
K8120L
$766.00
K8120R
$766.00
K1058
$905.00
K1058
KIT75D
BACK
October 11, 2016 12:17 PM
K8120R
K8120L
www.kaymar.com.au
www.kaymar.com.au
BACK TO CONTENTS
October 11, 2016 12:17 PM
* sold separately
Page 71
NEXT PAGE
TOYOTA
Lc75
LOCK PLATES
K0100-Kit-Toy
K0100NP-Kit-Toy
K0160-Kit
K0160NP-Kit
Lock Plate (NP) Kit Steel Wheels with NP bracket $86.00
TOYOTA
$168.00
LC62
K0160NP-KIT
K0160-KIT
K0100NP-KIT-TOY
K0100-KIT-TOY
ACCESSORIES
K0491
$89.00
K0490
$106.00
K0500LED
Telescopic Light
$260.00
K5000
Jack Holder WOD Steel Wheels
$179.00
K7124
Wheel on door Extension bracket
$125.00
K7125
H/F bracket to suit K7124
$117.00
K7125
K7124
K0491
K5000
BACK
October 11, 2016 12:17 PM
K0490
Landcruiser 62 Series with JCD kit in Canadian wilderness
K0500LED
www.kaymar.com.au
www.kaymar.com.au
BACK TO CONTENTS
October 11, 2016 12:17 PM
Page 73
NEXT PAGE
TOYOTA
Lc62
TOYOTA
Lc62
LANDCRUISER 62 MID 1985 - 1989
K1340
REAR BAR
Twin Pivots LIB
$1,526.00
K8000L
$766.00
K8000R
$766.00
K1063
$905.00
K1068
$905.00
K3140
KIT62
REAR BAR KITS
Twin Pivots LIB, LHS Carrier - Steel Wheels, RHS Carrier - Steel Wheels
$2,950.00
KIT62-L-JCD
Twin Pivots LIB, LHS Carrier - Steel Wheels, RHS Double Jerry Can Holder
$3,050.00
KIT62-R-JCD
K1068
Twin Pivots LIB, RHS Carrier - Steel Wheels, LHS Double Jerry Can Holder
K1063
$3,050.00
KIT62
KIT62-L-JCD
K8000L
K8000R
KIT62-R-JCD
BACK
October 11, 2016 12:17 PM
www.kaymar.com.au
www.kaymar.com.au
BACK TO CONTENTS
October 11, 2016 12:17 PM
Page 75
NEXT PAGE
TOYOTA
Lc62
TOYOTA
Lc62
LOCK PLATES
K0160-Kit
K0160NP-Kit
K0100-Kit-Toy
K0100NP-Kit-Toy
ACCESSORIES
$86.00
K0300
$179.00
K0300NP
$200.00
Lock Plate Kit Factory Alloys
$102.00
K0400
$179.00
$113.00
K0400NP
$200.00
K0470
$200.00
K0470NP
$200.00
Lock Plate Kit (NP) Factory Alloys
K0470.002
$200.00
K0470NP.002
$228.00
K6217
$190.00
K0500LED
Telescopic Light
$260.00
K0160-KIT
K0100NP-KIT-TOY
K0300
K0400NP
K0300NP
K0100-KIT-TOY
K0160NP-KIT
K0470
K0300NP
K0400.psd
K06217
K0470NP
K0470.002
K0500LED
K0470NP.002
BACK
October 11, 2016 12:17 PM
www.kaymar.com.au
www.kaymar.com.au
BACK TO CONTENTS
October 11, 2016 12:17 PM
Page 77
NEXT PAGE
TOYOTA
TOYOTA
Lc40
LANDCRUISER 40 SWB
K1255
REAR BAR
Twin Pivots LIB
LC40
$1,495.00
K1255
LANDCRUISER 40 SWB
KIT40
REAR BAR KITS
Twin Pivots LIB, LHS Carrier - Steel Wheels, RHS Carrier - Steel Wheels
$2,920.00
KIT40-L-JCD
Twin Pivots LIB, LHS Carrier - Steel Wheels, RHS Double Jerry Can Holder
$3,020.00
KIT40-R-JCD
$3,020.00
KIT40
KIT-R-JCD
KIT40-L-JCD
Please note the images shown on this
page are digital representations only
Landcruiser 40 Series with JCS kit in the Nevada desert
- proportions and measurements may
not be to absolute scale
BACK
October 11, 2016 12:17 PM
www.kaymar.com.au
www.kaymar.com.au
BACK TO CONTENTS
October 11, 2016 12:17 PM
Page 79
NEXT PAGE
TOYOTA
Lc40
TOYOTA
Lc40
LANDCRUISER 40 SWB
LANDCRUISER 40 SWB
LOCK PLATES
K8000L
$766.00
K0160-Kit
K8000R
$766.00
K0160NP-Kit
K1063
$905.00
K0100-Kit-Toy
Lock Plate Kit Factory Alloys
$102.00
K1068
$905.00
K0100NP-Kit-Toy
Lock Plate Kit (NP) Factory Alloys
$113.00
K0100-KIT-TOY
$86.00
K0100NP-KIT-TOY
K1068
K0160-KIT
K1063
K0160NP-KIT
LANDCRUISER 40 SWB
ACCESSORIES
K0300
$179.00
K0470
$200.00
K6217
$190.00
K0500LED
Telescopic Light
$260.00
K6090
LHS Jack Holder suit Windscreen Mount
$64.00
K6091
RHS Jack Holder suit Windscreen Mount
$64.00
K0470
K0300
K8000R
K8000L
K06217
K6090_K6091
BACK
October 11, 2016 12:17 PM
www.kaymar.com.au
www.kaymar.com.au
BACK TO CONTENTS
October 11, 2016 12:17 PM
K0500LED
Page 81
NEXT PAGE
TOYOTA
TOYOTA
prado150
PRADO 150 GX, GXL, VX (to June 2011)
REAR BAR
K3720
Twin Pivots LIB No Sensors
$2,168.00
K3720-S
Twin Pivots LIB Sensors
$2,168.00
prado 150
K3720/K3720-S
REAR BAR KITS
KITPrado150
Twin Pivots LIB No Sensors, LHS Carrier (alloy wheels), RHS Carrier (alloy wheels), Door Mount Bracket Kit
$3,580.00
KITPrado150-S
Twin Pivots LIB Sensors, LHS Carrier (alloy wheels), RHS Carrier (alloy wheels), Door Mount Bracket Kit
$3,580.00
KitPrado150
Prado 150 with Twin Wheel Carrier kit
KitPrado150-S
BACK
October 11, 2016 12:17 PM
www.kaymar.com.au
www.kaymar.com.au
BACK TO CONTENTS
October 11, 2016 12:17 PM
Page 83
NEXT PAGE
TOYOTA
prado150
PRADO 150 GXL, VX ONLY (from June 2011)
K3720U-S
Twin Pivots LIB Upgrade Sensors
TOYOTA
prado150
REAR BAR
$2,168.00
PRADO 150 GX ONLY (from June 2011) NO SENSORS
K3720U
REAR BAR
Twin Pivots LIB Upgrade No Sensors
$2,168.00
K3720U-S
K3720U
REAR BAR KITS
KITPRADO151-S
Twin Pivots LIB Sensors, LHS Carrier - Alloy Wheels, RHS Carrier - Alloy Wheels, Door Mount Bracket Kit
$3,580.00
KITPRADO151-S-R-JCD
Twin Pivots LIB Sensors, RHS Carrier - Alloy Wheels, LHS Double Jerry Can Holder, Door Mount Bracket Kit
$3,680.00
REAR BAR KITS
KITPRADO152
Twin Pivots LIB Upgrade No Sensors, LHS Carrier - Alloy Wheels, RHS Carrier - Alloy Wheels, Door Mount Bracket Kit
$3,580.00
KITPRADO152-R-JCD
Twin Pivots LIB Upgrade No Sensors, RHS Carrier - Alloy Wheels, RHS LHS Double Jerry Can Holder, Door Mount Bracket Kit
$3,680.00
KITPrado151-S
KITPrado152
KITPrado151-S-R-JCD
BACK
October 11, 2016 12:17 PM
KITPrado152-R-JCD
www.kaymar.com.au
www.kaymar.com.au
BACK TO CONTENTS
October 11, 2016 12:17 PM
Page 85
NEXT PAGE
TOYOTA
prado150
K8140L
K8140R
K1058
TOYOTA
prado150
LHS Carrier (Alloy Wheels) *may need NP bracket - If ordering this separately – Must order K6092-Kit
$766.00
K8140UL
$766.00
$766.00
K8140UR
LHS Double Jerry Can Holder - If ordering this separately – Must order K6092-Kit also
$905.00
K1058
LHS Double Jerry Can Holder - If ordering this separately –
Must order K6092-Kit also
$766.00
$905.00
K1058
K1058
K8140R
K8140L
K8140L
K8140R
K1058
BACK
K8140UL
$766.00
$766.00
K8140UR
LHS Double Jerry Can Holder - If ordering this separately – Must order K6092-Kit also
$905.00
October 11, 2016 12:17 PM
www.kaymar.com.au
www.kaymar.com.au
BACK TO CONTENTS
October 11, 2016 12:17 PM
Page 87
NEXT PAGE
TOYOTA
prado150
TOYOTA
prado150
LOCK PLATES
LOCK PLATES
K0490
$106.00
K0491
Jack Holder suit RHS Carrier only $89.00
K0500LED
Telescopic Light
$260.00
K7120
$125.00
K7123
$117.00
K6092-Kit
Door Mount Bracket Kit including Number plate light
$185.00
K6320-Kit
$140.00
K6321
Camera patch harness for Prado 150 pre Nov 2013
$70.00
K6322
Camera patch harness for Prado 150 post Nov 2013
$70.00
K6155 Kakadu Wing Brace $254.00
K6109
Wiring Harness
$160.00
K0179-Kit
Lock Plate Kit Alloy Wheels
$95.00
K0179NP-Kit
Lock Plate (NP) Kit Alloy Wheels
$197.00
K0179NP-KIT
K0179-KIT
PRADO 150 GX, GXL, VX (to June 2011)ACCESSORIES
K0490
K0491
Jack Holder suit RHS Carrier only K0500LED
Telescopic Light
$260.00
K7120
$125.00
K7123
$117.00
K6092-Kit
$185.00
K6320-Kit
$140.00
K6321
Camera patch harness for Prado 150 pre Nov 2013
$70.00
K6322
Camera patch harness for Prado 150 post Nov 2013
$70.00
K6155 Kakadu Wing Brace $254.00
K6109
Wiring Harness
$160.00
ACCESSORIES
$106.00
$89.00
K6320-KIT
NOTE: The
K6320-KIT fits to
the RHS carrier
ONLY
K6109-KIT
K6322
K7120
K6092-KIT
K6322
K6109-KIT
K6155
K6321
K6320-KIT
NOTE: The K6320-KIT fits to
the RHS carrier ONLY
K6155
K6321
K0490
K7123
K0490
BACK
October 11, 2016 12:17 PM
K0491
K0500LED
www.kaymar.com.au
K7123
www.kaymar.com.au
BACK TO CONTENTS
K0491
K0500LED
October 11, 2016 12:17 PM
Page 89
NEXT PAGE
TOYOTA
prado150
ACCESSORIES
K0490
$106.00
K0491
K0500LED
Telescopic Light
$260.00
K7120
$125.00
K7123
$117.00
K6092-Kit
$185.00
K6109
Wiring Harness
$160.00
TOYOTA
prado 120
K7123
K7120
K6109-KIT
K0500LED
K0491
K6092-KIT
Prado 120 with JCD kit
K0490
BACK
October 11, 2016 12:17 PM
www.kaymar.com.au
www.kaymar.com.au
BACK TO CONTENTS
October 11, 2016 12:17 PM
Page 91
NEXT PAGE
TOYOTA
prado120
PRADO 120 NO SENSORS
K3705
Twin Pivots LIB
TOYOTA
prado120
REAR BAR
REAR BAR
$1,844.00
K3705
KITPRADO120-R-JCD
KITPRADO120
REAR BAR KITS
Note: jerry cans, recovery hitch and
shackle are not included
Twin Pivots LIB Sensors, LHS Carrier - Alloy Wheels, RHS Carrier - Alloy Wheels
$3,250.00
K8110L
$766.00
KITPRADO120-R-JCD Twin Pivots LIB Sensors, LHS Double Jerry Can Holder, RHS Carrier - Alloy Wheels
$3,350.00
K8110R
$766.00
K1058
$905.00
K8110R
K8110L
KITPRADO120
K1058
BACK
October 11, 2016 12:17 PM
www.kaymar.com.au
www.kaymar.com.au
BACK TO CONTENTS
October 11, 2016 12:17 PM
Page 93
NEXT PAGE
TOYOTA
prado120
LOCK PLATES
K6060-3
Chrome wheel nuts to allow fitment of Steel Wheels
$18.00
K0179-Kit
Lock Plate Kit Steel Alloy Wheels
$95.00
K0179NP-Kit
Lock Plate (NP) Kit Alloy Wheels
$197.00
TOYOTA
hilux
K06060-3
2015 SR5
K0179NP-KIT
K0179-KIT
ACCESSORIES
K0490
$106.00
K0492
Jack Holder $179.00
K0500LED
Telescopic Light
$260.00
K7120
$125.00
K7121
$80.00
K7120
K7121
K0492
K0490
BACK
October 11, 2016 12:17 PM
Hilux SR5 2015 with twin wheel kit
K0500LED
www.kaymar.com.au
www.kaymar.com.au
BACK TO CONTENTS
October 11, 2016 12:17 PM
Page 95
NEXT PAGE
TOYOTA
hilux SR5 2015
TOYOTA
hilux SR5 2015
HILUX SR5 2015
K3890
REAR BAR
Twin Pivots LIB - If only fitting bar and no carriers – Must order K6170-Kit
$1,777.00
HILUX SR5 2015
K1096
LHS Carrier (Steel Wheels) * may need NP bracket
$766.00
K8140R
RHS Carrier (Alloy Wheels) * may need NP bracket
$782.00
K1058
$905.00
K1064
$905.00
K3890
HILUX SR5 2015
REAR BAR KITS
KITHIL-15
Twin Pivots LIB, LHS Carrier - Steel Wheels, RHS Single Jerry Can Holder
$3,200.00
KITHIL-15-L-JCD
$3,300.00
KITHIL-15-R-JCD
Twin Pivots LIB, RHS Carrier - Steel Wheels, LHS Single Jerry Can Holder
$3,300.00
K1058
K1096
KITHIL-05U-L-JCS
BACK
October 11, 2016 12:17 PM
www.kaymar.com.au
www.kaymar.com.au
BACK TO CONTENTS
October 11, 2016 12:17 PM
Page 97
NEXT PAGE
TOYOTA
hilux sr5 2015
HILUX SR5 2015
LOCK PLATES
K0187NP-Kit
$102.00
K0179NP-Kit
$197.00
TOYOTA
hilux 2005
K0179NP-KIT
K0187-KIT
HILUX SR5 2015
ACCESSORIES
K0493
H/F Aerial Bracket suit K1096 only
$106.00
K0492
Centre Jack Holder $179.00
K0500LED
Telescopic Light
$260.00
K6170-Kit
Ute Bar only number plate kit
$69.00
K0492
K0500LED
K6170-KIT
Hilux with JCS kit in outback Australia
K0493
BACK
October 11, 2016 12:17 PM
www.kaymar.com.au
www.kaymar.com.au
BACK TO CONTENTS
October 11, 2016 12:17 PM
Page 99
NEXT PAGE
TOYOTA
hilux 2005
TOYOTA
hilux 2005
HILUX SINGLE/DUAL CAB 2005+
K2040U
REAR BAR
$1,777.00
K1096
$766.00
K1097
RHS Single Jerry Can Holder
$782.00
K2040U
KITHIL-05U-L-JCS
REAR BAR KITS
$3,200.00
K1097
K1096
KITHIL-05U-L-JCS
BACK
October 11, 2016 12:17 PM
www.kaymar.com.au
www.kaymar.com.au
BACK TO CONTENTS
October 11, 2016 12:17 PM
Page 101 NEXT PAGE
TOYOTA
hilux 2005
LOCK PLATES
K0187NP-Kit
$102.00
K0179NP-Kit
$197.00
TOYOTA
fj cruiser
K0179NP-KIT
K0187-KIT
ACCESSORIES
K0493
$106.00
K0492
Centre Jack Holder $179.00
K0500LED
Telescopic Light
$260.00
K6170-Kit
$69.00
K0492
K0500LED
K6170-KIT
FJCruiser with JCD kit
K0493
BACK
October 11, 2016 12:17 PM
www.kaymar.com.au
www.kaymar.com.au
BACK TO CONTENTS
October 11, 2016 12:17 PM
Page 103 NEXT PAGE
TOYOTA
fjcruiser
TOYOTA
fjcruiser
LANDCRUISER FJ CRUISER with SENSORS
K3660-S
REAR BAR
Twin Pivots LIB Sensors
$1.920.00
K3660S
KITFJ-S-L-JCD
KITFJ-S
REAR BAR KITS
$3,370.00
KITFJ-S-L-JCD
Twin Pivots LIB, LHS Carrier - Alloy Wheels, RHS Double Jerry Can Holder
$3,470.00
KITFJ-S-R-JCD
Twin Pivots LIB, RHS Carrier - Alloy Wheels, LHS Double Jerry Can Holder
$3,470.00
KITFJ-S-R-JCD
KITFJ-S
BACK
October 11, 2016 12:17 PM
www.kaymar.com.au
www.kaymar.com.au
BACK TO CONTENTS
October 11, 2016 12:17 PM
Page 105 NEXT PAGE
TOYOTA
fjcruiser
TOYOTA
fjcruiser
K8160L
$766.00
K8160R
$766.00
K1058 LHS Double Jerry Can Holder
$905.00
K1064
$905.00
K6300-Kit
CAMERA KIT
$145.00
NOTE: The K6300-KIT fits to the RHS carrier ONLY
K6300-KIT
K6301
WIRING HARNESS
Wiring Harness
$130.00
K1064
K1058
K6301
ACCESSORIES
K0491
K0500LED
Telescopic Light
$260.00
K6002
Telescopic Pole & wiring (no light)
$207.00
K6002
K8160R
K8160L
K0491
K0500LED
BACK
October 11, 2016 12:17 PM
www.kaymar.com.au
www.kaymar.com.au
BACK TO CONTENTS
October 11, 2016 12:17 PM
Page 107 NEXT PAGE
nissan
nissan
patrol Y62
NISSAN PATROL Y62 ST-L, Ti
K3560
REAR BAR
Twin Pivots LIB - If only fitting bar and no carriers $2,431.00
patrol Y62
K3560
REAR BAR KITS
KITY62
Tiwn Pivots LIB, LHS Carrier (Alloy Wheels), RHS Carrier (Alloy Wheels)
$3,800.00
KITY62-L-JCD
Tiwn Pivots LIB, LHS Carrier (Alloy Wheels), RHS Double Jerry Can Holder
$3,900.00
KITY62-R-JCD
Tiwn Pivots LIB, RHS Carrier (Alloy Wheels), LHS Double Jerry Can Holder
$3,900.00
KITY62
Y62 with JCD kit
BACK
October 11, 2016 12:17 PM
www.kaymar.com.au
www.kaymar.com.au
BACK TO CONTENTS
October 11, 2016 12:17 PM
Page 109 NEXT PAGE
nissan
patrol Y62
nissan
patrol Y62
K8210L
$766.00
K8210R
$766.00
K1450 LHS Double Jerry Can Holder
$905.00
K1455
$905.00
KITY62-L-JCD
NOTE to Ti-L Owners
An issue has arisen recently affecting customers having steel rear bars installed on their TI-L Y62. Placement of the sensor/sender
units causes them to be obscured by the new steel bar with which the system has been found to be incompatible.
While the Kaymar rear bar will mount and function perfectly on the TI-L as a carrier system, the blind spot monitoring radar system
has to be shut down - an easy thing to do as it can be switched off at the dash.
K8210R
K8210L
For most Y62 owners who have made the decision to enhance their TI-L with a rear bar and carrier system the trade off is probably
not even of concern as the rear end protection and the opportunity of carrying spare wheels or jerry cans and increased departure
angle is of greater importance.
Importantly this is an issue only with the TI-L - All other models of the Y62 are UNAFFECTED.
K1450
KITY62-R-JCD
K1455
BACK
October 11, 2016 12:17 PM
www.kaymar.com.au
www.kaymar.com.au
BACK TO CONTENTS
October 11, 2016 12:17 PM
Page 111 NEXT PAGE
nissan
patrol Y62
LOCK PLATES
K0189
Lock Plate Alloy
K0189NP-KIT
Lock Plate (NP) Kit Alloy with NP Bracket
$TBA
$113.00
nissan
patrol gu
K0189NP-KIT
K0189
K0491
K0500LED
Telescopic Light
ACCESSORIES
$89.00
$260.00
GU 4 with JCD kit
K0500LED
K0491
BACK
October 11, 2016 12:17 PM
www.kaymar.com.au
www.kaymar.com.au
BACK TO CONTENTS
October 11, 2016 12:17 PM
Page 113 NEXT PAGE
nissan
patrol gu
NISSAN GU PATROL - OCT 2004+
K3550
nissan
patrol gu
REAR BAR-NOT FOR DX MODEL
Twin Pivots LIB - If only fitting bar and no carriers – Must order K6087 also.
NISSAN GU PATROL - PRE OCT 2004
K3530
$2,431.00
Twin Pivots LIB - If only fitting bar and no carriers – Must order K6087 also
K3550
NISSAN GU PATROL - OCT 2004+
REAR BAR-NOT FOR DX
$2,431.00
K3550
REAR BAR KITS - NOT FOR DX MODEL
KITGU4-LIB
KITGU4-LIB-R-JCD
Twin Pivots LIB, RHS Carrier - Alloy Wheels, LHS Double Jerry Can Holder $3,900.00
$3,800.00
REAR BAR KITS - NOT FOR DX
KITGU-LIB
Twin Pivots LIB, LHS Carrier - Steel Wheels, RHS Carrier - Steel Wheels $3,800
KITGU-LIB-R-JCD
$3,900.00
KITGU-LIB
KITGU4-LIB
KKITGU-LIB-R-JCD
KITGU4-LIB-R-JCD
BACK
October 11, 2016 12:17 PM
www.kaymar.com.au
www.kaymar.com.au
BACK TO CONTENTS
October 11, 2016 12:17 PM
Page 115 NEXT PAGE
nissan
patrol gu
NISSAN GU PATROL OCT 2004+
nissan
patrol gu
CARRIERS FOR REAR BAR-NOT FOR DX
K8070L
$766.00
K8050L
$766.00
K8070R
$766.00
K8050R
$766.00
K1089
$905.00
K1089
$905.00
K1089
K1089
K8050L
K8070L
K8050R
K8070R
BACK
October 11, 2016 12:17 PM
www.kaymar.com.au
www.kaymar.com.au
BACK TO CONTENTS
October 11, 2016 12:17 PM
Page 117 NEXT PAGE
nissan
patrol gu
NISSAN GU PATROL SERIES 4 OCT 2004+
nissan
patrol gu
LOCK PLATES-NOT FOR DX MODEL
K0181-Kit
Lock Plate Kit Steel
K0181NP-Kit
Lock Plate (NP) Kit Steel with NP bracket
K0180-Kit
K0180NP-Kit
NISSAN GU PATROL SERIES 4 OCT 2004+
ACCESSORIES-NOT FOR DX MODEL
$86.00
K0491
$89.00
$168.00
K0490
$106.00
Lock Plate Kit Alloy
$68.00
K6217
$190.00
Lock Plate Kit Alloy with NP bracket
$79.00
K0500LED
Telescopic Light
$260.00
K6087
Wheel on Door Extension Bracket
$124.00
K7122
H/F Aerial Bracket suit K6087
$80.00
K5065
WOD Centre Jack Holder Steel Wheels only
$200.00
K0470.027
WOD Centre H/F Aerial Bracket Steel Wheels only
$217.00
K0181-KIT
K0180-KIT
K0180NP-KIT
NISSAN GU PATROL SERIES 4 - PRE OCT 2004
K0181NP-KIT
K0128-Kit Lock Plate Kit Factory Alloy
$68.00
K0128NP-Kit
$79.00
K0125-Kit
$55.00
K0125NP-Kit
Lock Plate Kit (NP) Kit Steel Wheels with NP bracket
$66.00
K0491
K0470.027
K0490
K5065
Image not yet available
for K0125-KIT
K7122_hf_bracket
K0128NP-KIT
Image not yet available
for K0125NP-KIT
K0128-KIT
BACK
October 11, 2016 12:17 PM
www.kaymar.com.au
K06217
www.kaymar.com.au
K6087
K0500LED
BACK TO CONTENTS
October 11, 2016 12:17 PM
Page 119 NEXT PAGE
nissan
patrol gu
NISSAN GU PATROL SERIES 4 - PRE OCT 2004
ACCESSORIES-NOT FOR DX MODEL
K0310
Jack Holder Steel Wheels RHS carrier only
$179.00
K0312
Jack Holder Factory Alloy Wheels RHS carrier only
$179.00
K0470.009
H/F Aerial Bracket Steel Wheels RHS carrier only
$200.00
K6217
$190.00
K0500LED
Telescopic Light
$260.00
K6087
Wheel on Door Extension Bracket
$124.00
K7122
H/F Aerial Bracket suit K6087
$80.00
K5065
WOD Centre Jack Holder Steel Wheels only
$200.00
K0470.027
WOD Centre H/F Aerial Bracket Steel Wheels only
$217.00
nissan
patrol gq
K0470.009
K0470.027
K0312
K0310
K6087
K5065
K7122
BACK
October 11, 2016 12:17 PM
K06217
K0500LED
GQ with Twin Wheel Carrier kit
www.kaymar.com.au
www.kaymar.com.au
BACK TO CONTENTS
October 11, 2016 12:17 PM
Page 121 NEXT PAGE
nissan
patrol gq
nissan
patrol gq
NISSAN GQ PATROL 1990+
K2610
REAR BAR
Twin Pivots OEL
$1,318.00
K8010L
$766.00
K8010R
$766.00
K1078D
$905.00
K2610
KITGQ
REAR BAR KITS
Twin Pivots OEL, LHS Carrier - Steel Wheels, RHS Carrier - Steel Wheels
$2,750.00
KITGQ-R-JCS
IMAGE NOT CURRENTLY
AVAILABLE FOR THIS ITEM
Twin Pivots OEL, RHS Carrier - Steel Wheels, RHS Single Jerry Can Holder
KITGQ-R-JCD
K8010L
$2,750.00
Twin Pivots OEL, RHS Carrier - Steel Wheels, RHS Double Jerry Can Holder
$2,860.00
K8010R
K1078D
IMAGE NOT CURRENTLY
KITGQ
LOCK PLATES
K0100-Kit-Toy
$102.00
K0100NP-Kit-Toy
$113.00
K0160-Kit
$86.00
K0160NP-Kit
KITGQ_R_JCD
K0100-KIT-TOY
K0160-KIT
K0100NP-KIT-TOY
K0160NP-KIT
BACK
October 11, 2016 12:17 PM
www.kaymar.com.au
www.kaymar.com.au
BACK TO CONTENTS
October 11, 2016 12:17 PM
Page 123 NEXT PAGE
nissan
patrol gq
ACCESSORIES
K0300
$179.00
K0300NP
$200.00
K0400
$179.00
K0400NP
$200.00
K0470
$200.00
K0470NP
$228.00
K0470.002
$200.00
K0470NP.002
$228.00
K6217
$190.00
K0500LED
Telescopic Light
$260.00
K5005
Jack Holder WOD $179.00
K0470.021
H/F Aerial Bracket WOD
$200.00
nissan
navara d40
K0300
K0400
K0300NP
K0470.002
K0470NP.002
K0400NP
K0470
K0470NP_005
K0470NP
K06217
K5005
BACK
October 11, 2016 12:17 PM
K0470.021
Navara D40 with JCS kit
K0500LED
www.kaymar.com.au
www.kaymar.com.au
BACK TO CONTENTS
October 11, 2016 12:17 PM
Page 125 NEXT PAGE
nissan
navara d40
NISSAN NAVARA D40
nissan
navara d40
REAR BAR
K2105U
Twin Pivots Upgrade LIB - If fitting bar only and no carriers – Must order K6170-Kit $1,777.00
NISSAN NAVARA D40
K1036U
LHS Carrier Upgrade (Steel Wheels) *may need NP bracket
$766.00
K1097
$782.00
K2105U
NISSAN NAVARA D40
KITD40U-L-JCS
REAR BAR KITS
$3,200.00
K1097
K1036U
KITD40U-L-JCS
BACK
October 11, 2016 12:17 PM
www.kaymar.com.au
www.kaymar.com.au
BACK TO CONTENTS
October 11, 2016 12:17 PM
Page 127 NEXT PAGE
nissan
navara d40
NISSAN NAVARA D40
LOCK PLATES
K0102-Kit
Lock Plate Steel Wheels
K0102NP-Kit
Lock Plate Steel Wheels with NP bracket
$168.00
K0103-Kit
$86.00
K0103NP-Kit
K0102-KIT
$86.00
$179.00
landrover
discovery
3 & 4 from 2005+
K0102NP-KIT
K0103-KIT
K0103NP-KIT
NISSAN NAVARA D40
ACCESSORIES
K6217
$190.00
K0493
$106.00
K0500LED
Telescopic Light
$260.00
K6170-Kit
$69.00
K6170-KIT
K0493
BACK
October 11, 2016 12:17 PM
K06217
Discovery with Rear Bar and RHS Carrier fitted
K0500LED
www.kaymar.com.au
www.kaymar.com.au
BACK TO CONTENTS
October 11, 2016 12:17 PM
Page 129 NEXT PAGE
landrover
discovery 3&4
LAND ROVER DISCOVERY 3&4 2005+
K2995
landrover
discovery 3&4
REAR BAR
Twin Pivots LIB Sensor Ready
$1,824.00
K8090L
$766.00
K8090R
$766.00
K1095
LHS Single Jerry Can Holder
$782.00
Please Note:
Camera relocation and lane
detection systems are not
supported when replacement
steel bars are fitted
K2995
LAND ROVER DISCOVERY 4 2005+
KITDISCO
REAR BAR KITS
Twin Pivots LIB Sensors, RHS Carrier - Alloy Wheels, LHS Carrier - Alloy Wheels
$3,250.00
K1095
KITDISCO-R-JCS
Twin Pivots LIB Sensors, RHS Carrier - Alloy Wheels, LHS Single Jerry Can Holder
$3,250.00
KITDISCO
K8090L
K8090R
BACK
October 11, 2016 12:17 PM
KITDISCO-R-JCS
www.kaymar.com.au
www.kaymar.com.au
BACK TO CONTENTS
October 11, 2016 12:17 PM
Page 131 NEXT PAGE
landrover
discovery 3&4
LOCK PLATES
K0148-Kit
$94.00
K0148NP-Kit
Lock Plate Kit Factory Alloy with NP bracket
$179.00
K0149-Kit
Lock Plate Kit Aftermarket Performance Alloy
$95.00
K0149NP-Kit
Lock Plate (NP) Kit Aftermarket Performance Alloy
$179.00
landrover
defender 110
K0149NP-KIT
K0149-KIT
K0148NP-KIT
K0148-KIT
K6027-Kit
MUDFLAP KIT
Disco 4 Mudflap & Bracket Kit
$328.00
K6027
ACCESSORIES
K0491
Jack Holder Suit RHS Carrier only
$89.00
K0490
H/F Aerial Bracket Suit RHS Carrier only
$106.00
K0500LED
Telescopic Light
$260.00
Defender with Kaymar Wheel Carrier
K0500LED
BACK
October 11, 2016 12:17 PM
K0490
K0491
www.kaymar.com.au
www.kaymar.com.au
BACK TO CONTENTS
October 11, 2016 12:17 PM
Page 133 NEXT PAGE
landrover
defender 110
LAND ROVER DEFENDER WAGON 110
K1700
landrover
defender 110
STANDARD CARRIER
RHS Standard Carrier $1,067.00
ACCESSORIES
K0420
$179.00
K0500LED
Telescopic Light
$260.00
K0420
K1700
LAND ROVER DEFENDER UTE 110 CREW CAB
K1710
RHS Standard Carrier STANDARD CARRIER
$1,067.00
LAND ROVER DEFENDER UTE 110 CREW CAB
K1710
K0120
ACCESSORIES
K0420
$179.00
K0500LED
Telescopic Light
$260.00
LOCK PLATES
$55.00
K0420
K0120
BACK
October 11, 2016 12:17 PM
K0500LED
www.kaymar.com.au
www.kaymar.com.au
BACK TO CONTENTS
October 11, 2016 12:17 PM
Page 135 NEXT PAGE
mitsubishi
mitsubishi
triton ml
MITSUBISHI TRITON ML DUAL CAB
K3800
REAR BAR
$1,777.00
triton ml
K3800
KITTRML-L-JCS
REAR BAR KITS
Twin Pivots LIB, LHS Carrier - Alloy Wheels, RHS Single Jerry Can Holder
$3,200.00
KITTRML-L-JCS
Triton ML with JCS kit
BACK
October 11, 2016 12:17 PM
www.kaymar.com.au
www.kaymar.com.au
BACK TO CONTENTS
October 11, 2016 12:17 PM
Page 137 NEXT PAGE
mitsubishi
triton ml
mitsubishi
triton ml
LOCK PLATES
K1021
LHS Carrier (Alloy Wheels) $766.00
K0090-KIT
$102.00
K1097
$782.00
K0090NP-KIT
$113.00
K0091-Kit
$102.00
K0091NP-Kit
Lock Plate (NP) Kit Alloy with NP bracket
$113.00
K0091-KIT
K0090NP-KIT
K0091NP-KIT
K0090-KIT
K1097
ACCESSORIES
K0493
H/F Aerial Bracket suit some LHS carriers
$106.00
K0500LED
Telescopic Light
$260.00
K6170-Kit
Ute bar only number plate kit
K6170-KIT
K1021
BACK
October 11, 2016 12:17 PM
K0493
www.kaymar.com.au
www.kaymar.com.au
BACK TO CONTENTS
October 11, 2016 12:17 PM
$69.00
K0500LED
Page 139 NEXT PAGE
mitsubishi
mitsubishi
challenger 2010pb
MITSUBISHI CHALLENGER 2010PB
K3320
REAR BAR
Twin Pivots LIB No Sensors
challenger 2010pb
$2,040.00
K3320
REAR BAR KITS
KITCHALL
Twin Pivots LIB No Sensors, LHS Carrier - Alloy Wheels, RHS Carrier - Alloy Wheels
$3,490.00
KITCHALL-R-JCS
Twin Pivots LIB No Sensors, RHS Carrier - Alloy Wheels, LHS Single Jerry Can Holder
$3,490.00
KITCHALL
Challenger PB with JCS kit
KITCHALL-R-JCS
BACK
October 11, 2016 12:17 PM
www.kaymar.com.au
www.kaymar.com.au
BACK TO CONTENTS
October 11, 2016 12:17 PM
Page 141 NEXT PAGE
mitsubishi
challenger 2010pb
mitsubishi
challenger 2010pb
LOCK PLATES
K8150L
$766.00
K0091-Kit
$102.00
K8150R
$766.00
K0091NP-Kit
Lock Plate (NP) Kit Alloy with NP bracket
$113.00
K1095
$782.00
K0110-Kit
$102.00
K0110NP-Kit
$113.00
K0090NP-KIT
K0090-KIT
K0110-KIT
K1095
K0110NP-KIT
ACCESSORIES
K0490
$106.00
K0500LED
Telescopic Light
$260.00
K8105L
K6108
K8105R
BACK
October 11, 2016 12:17 PM
K0490
K0500LED
Wiring Harness
WIRING HARNESS
$350.00
K6108
www.kaymar.com.au
www.kaymar.com.au
BACK TO CONTENTS
October 11, 2016 12:17 PM
Page 143 NEXT PAGE
ford
ford
ranger px
FORD RANGER PX - KAYMAR SENSOR KIT READY
K3920U
REAR BAR
Twin Pivots LIB - If fitting bar only and no carriers – Must order K6171-Kit
$1,929.00
ranger px
K3920U
KITPXRU
KITPXRU-L-JCD
PX Ranger with JCD kit
KITPXRU-R-JCD
BACK
October 11, 2016 12:17 PM
www.kaymar.com.au
www.kaymar.com.au
BACK TO CONTENTS
October 11, 2016 12:17 PM
Page 145 NEXT PAGE
ford
ranger px
ford
ranger px
LOCK PLATES
K1021
$766.00
K0090-Kit
$108.00
K8180R
$766.00
K0090NP-Kit
$119.00
K1058
$905.00
K0091-Kit
Lock Plate Kit AlloyWheels
$102.00
K1064
$905.00
K0091NP-Kit
Lock Plate (NP) Kit Alloy Wheels with NP bracket
$113.00
K0090-KIT
K0091-KIT
K0091NP-KIT
K0090NP-KIT
K1021
K8180R
ACCESSORIES
K0495
Jack Holder Alloy
$179.00
K0495NP
Jack Holder (NP) Alloy
$200.00
K0496
Jack Holder Steel
$179.00
K0496NP
Jack Holder (NP) Steel
$200.00
K0490
$106.00
K0500LED
Telescopic Light
$260.00
K6170-Kit
$69.00
K0495
K0495NP
K0496
IMAGE NOT CURRENTLY
K0496NP
K1058
IMAGE NOT CURRENTLY
K1064
K0490
K0500LED
K6170-KIT
BACK
October 11, 2016 12:17 PM
www.kaymar.com.au
www.kaymar.com.au
BACK TO CONTENTS
October 11, 2016 12:17 PM
Page 147 NEXT PAGE
isuzu
isuzu
mux
ISUZU MUX - KAYMAR SENSOR KIT INCLUDED
mux
REAR BAR
K3945
Twin Pivots LIB - Including Kaymar reversing sensor kit
$2,190.00
KITMUX
Twin Pivots LIB, LHS Carrier, RHS Carrier, Sensor kit
$3,640.00
KITMUX-L-JCS
Twin Pivots LIB, LHS Carrier, RHS Single Jerry Can Holder, Sensor kit
$3,640.00
KITMUX-R-JCS
Twin Pivots LIB, RHS Carrier, LHS Single Jerry Can Holder, Sensor kit
$3,640.00
K3945
KITMUX
KITMUX-L-JCS
MUX with Single Jerry Can Holder and Wheel Carrier
KITMUX-R-JCS
BACK
October 11, 2016 12:17 PM
www.kaymar.com.au
www.kaymar.com.au
BACK TO CONTENTS
October 11, 2016 12:17 PM
Page 149 NEXT PAGE
isuzu
mux
isuzu
mux
LOCK PLATES
K8230L
LHS Carrier - *may need NP bracket
$766.00
K0187-Kit
Lock Plate Kit suits both Steel and Alloy Wheels
$95.00
K8230R
RHS Carrier - *may need NP bracket
$766.00
K0187NP-Kit
Lock Plate (NP) Kit suits both Steel and Alloy Wheels with NP bracket
$197.00
K1024
$782.00
K1025
$782.00
K0500LED
ACCESSORIES
Telescopic Light
$260.00
K8230L
K8230R
K0500LED
K1024L
BACK
October 11, 2016 12:17 PM
K1025
www.kaymar.com.au
www.kaymar.com.au
BACK TO CONTENTS
October 11, 2016 12:17 PM
Page 151 NEXT PAGE
mazda
bt50
mazda
bt50
FORD RANGER/MAZDA BT50 PRE 2012
K3850
REAR BAR
$1,777.00
Pre2012
K3850
KITBT50-L-JCS
REAR BAR KITS
$3,200.00
IMAGE NOT CURRENTLY
BACK
October 11, 2016 12:17 PM
KITBT50-L-JCS
www.kaymar.com.au
www.kaymar.com.au
BACK TO CONTENTS
October 11, 2016 12:17 PM
Page 153 NEXT PAGE
mazda
bt50
mazda
bt50
LOCK PLATES
K1022
$766.00
K0100-Kit
Lock Plate Kit AlloyWheels
$102.00
K1097
$782.00
K0100NP-Kit
$113.00
K0160-Kit_R
Lock Plate Kit (NP) Steel Wheels
$86.00
K0160NP-Kit-R
Lock Plate Kit (NP) Steel Wheels K0100-KIT
$168.00
K0160-KIT
K0160NP-KIT-R
K0100-KITNP
K1097
ACCESSORIES
K0493
$106.00
K0500LED
Telescopic Light
$260.00
K6170-Kit
$69.00
K1022
K6170-KIT
BACK
October 11, 2016 12:17 PM
www.kaymar.com.au
www.kaymar.com.au
K0493
BACK TO CONTENTS
October 11, 2016 12:17 PM
K0500LED
Page 155 NEXT PAGE
mazda
bt50
mazda
bt50 2012
MAZDA BT50 - KAYMAR SENSOR KIT READY
REAR BAR
K3920U
Twin Pivots LIB No Sensors - If fitting bar only and no carriers – Must order K6170-Kit
$1,929.00
2012
K3920U
KITRBT50U
REAR BAR KITS
KITBT50U-L-JCD
$3,350.00
Twin Pivots LIB, LHS Carrier - Alloy Wheels, RHS Double Jerry Can Holder
KITBT50U-R-JCD
Twin Pivots LIB, RHS Carrier - Alloy Wheels, LHS Double Jerry Can Holder
Mazda BT50 fitted with colour matched rear bar and twin carriers
BACK
October 11, 2016 12:17 PM
$3,450.00
$3,450.00
KITRBT50U
www.kaymar.com.au
www.kaymar.com.au
BACK TO CONTENTS
October 11, 2016 12:17 PM
Page 157 NEXT PAGE
mazdA
bt50 2012
mazdA
bt50 2012
K1021
`
$766.00
K8180R
$766.00
K1058
$905.00
K1064
$905.00
KITRBT50U-L-JCD
K1021
K8180R
KITRBT50U-R-JCD
K1064
K1058
BACK
October 11, 2016 12:17 PM
www.kaymar.com.au
www.kaymar.com.au
BACK TO CONTENTS
October 11, 2016 12:17 PM
Page 159 NEXT PAGE
mazdA
bt50 2012
mazdA
bt50 2012
LOCK PLATES
ACCESSORIES
K0090-Kit
$108.00
K0495
Jack Holder Alloy
$179.00
K0090NP-Kit
$119.00
K0495NP
Jack Holder (NP) Alloy
$200.00
K0160NP-Kit-R
Lock Plate Kit (NP) Steel Wheels $168.00
K0496
Jack Holder Steel
$179.00
K0496NP
Jack Holder (NP) Steel
$200.00
K0490
$106.00
K0500LED
Telescopic Light
$260.00
K6170-Kit
$69.00
K0495
K6170-KIT
K0160-KIT
K0090-KIT
K0495NP
K0160NP-KIT-R
K0496
IMAGE NOT CURRENTLY
K0490
K0496NP
IMAGE NOT CURRENTLY
K0090NP-KIT
K0500LED
BACK
October 11, 2016 12:17 PM
www.kaymar.com.au
www.kaymar.com.au
BACK TO CONTENTS
October 11, 2016 12:17 PM
Page 161 NEXT PAGE
jeep
jeep
wrangler jk
JEEP WRANGLER JK
K3750
REAR BAR
$1,663.00
wrangler jk
K3750
JEEP WRANGLER JK
KITJK-L-JCS
REAR BAR KITS
$3,000.00
KITJK-R-JCS
Twin Pivots LIB, RHS Carrier - Alloy Wheels, LHS Single Jerry Can Holder
$3,000.00
KITJK-L-JCS
KIT-R-JCS
Jeep JK Wrangler with KITJK-L-JCS fitted
BACK
October 11, 2016 12:17 PM
www.kaymar.com.au
www.kaymar.com.au
BACK TO CONTENTS
October 11, 2016 12:17 PM
Page 163 NEXT PAGE
jeep
wrangler jk
JEEP WRANGLER JK
jeep
wrangler jk
K1014
RHS Carrier 35” (Central) Alloy Wheels
$789.00
K1016
LHS Carrier Alloy Wheels
$766.00
K1017
RHS Carrier Alloy Wheels
$766.00
K1018
$782.00
K1019
$782.00
JEEP WRANGLER JK
LOCK PLATES
K0106
Lock Plate Steel Wheels
$55.00
K0106NP
Lock Plate (NP) Steel Wheels
$66.00
K0107
Lock Plate Alloy
$55.00
K0107NP
Lock Plate Alloy with NP bracket
$66.00
K0106NP
K0106
K1019
K0107NP
K0107
JEEP WRANGLER JK
K1018
ACCESSORIES
K0491
Jack Holder
$89.00
K0490
H/F Aerial Bracket
$106.00
K0500LED
Telescopic Light
$260.00
K6089
Wheel on door extension bracket
$124.00
K1017
K1016
K6089_steel
K1014
IMAGE NOT CURRENTLY
K0490
K6089_alloy
BACK
October 11, 2016 12:17 PM
www.kaymar.com.au
www.kaymar.com.au
BACK TO CONTENTS
K0491
October 11, 2016 12:17 PM
K0500LED
Page 165 NEXT PAGE
holden
holden
colorado 2012
HOLDEN COLORADO UTE DUAL CAB NO SENSORS
K3940
REAR BAR
$1,929.00
colorado
K3940
REAR BAR KITS
KITCOL
$3,350.00
KITCOL-L-JCD
Twin Pivots LIB No Sensors, LHS Carrier - Alloy Wheels, RHS Double Jerry Can Holder
$3,450.00
KITCOL-R-JCD
Twin Pivots LIB No Sensors, RHS Carrier - Alloy Wheels, LHS Double Jerry Can Holder
$3,450.00
KITCOL
Colorado RG with colour coded carrier
BACK
October 11, 2016 12:17 PM
www.kaymar.com.au
www.kaymar.com.au
BACK TO CONTENTS
October 11, 2016 12:17 PM
Page 167 NEXT PAGE
holden
colorado 2012
holden
colorado 2012
KITCOL-L-JCD
K8190L
K8190R
KITCOL-R-JCD
K6117
Holden Factory Loom
$766.00
K8190R
$766.00
K1058
$905.00
K1064
$905.00
$195.00
K6117
K8190L
WIRING LOOM
IMAGE NOT CURRENTLY
ACCESSORIES
K0493
H/F Bracket suit RHS Carrier only
$106.00
K0491
K0500LED
Telescopic Light
$260.00
K6170-Kit
$69.00
$89.00
K1064
K0491
K0493
BACK
K1058
October 11, 2016 12:17 PM
K0500LED
K6170-KIT
www.kaymar.com.au
www.kaymar.com.au
BACK TO CONTENTS
October 11, 2016 12:17 PM
Page 169 NEXT PAGE
holden
holden
rodeo
HOLDEN RODEO UTE DUAL CAB 2003 - 2012
K2205
REAR BAR
rodeo
$1,698.00
K2205
KITROD-L-JCS
REAR BAR KITS
Twin Pivots LIB, LHS Carrier (Steel Wheels), RHS Single Jerry Can Holder
$3,120.00
KITROD-L-JCS
Rodeo with JCD kit fitted
BACK
October 11, 2016 12:17 PM
www.kaymar.com.au
www.kaymar.com.au
BACK TO CONTENTS
October 11, 2016 12:17 PM
Page 171 NEXT PAGE
holden
rodeo
K1052
$766.00
K1067
$782.00
volkswagen
amarok
K1067
K1052
LOCK PLATES
K0112NP-Kit
Lock Plate Kit (NP) Factory Alloy
$113.00
K0111NP-Kit
Lock Plate Kit (NP) Steel Wheels
$113.00
ACCESSORIES
K6217
$190.00
K0500LED
Telescopic Light
$260.00
K6170-Kit
$69.00
K6170-KIT
K0500LED
K06217
BACK
October 11, 2016 12:17 PM
www.kaymar.com.au
Volkswagen Amarok with KITAMA-R-JCD fitted
www.kaymar.com.au
BACK TO CONTENTS
October 11, 2016 12:17 PM
Page 173 NEXT PAGE
volkswagen
amarok
volkswagen
amarok
VOLKSWAGEN AMAROK - KAYMAR SENSOR KIT READY
K3900U
REAR BAR
Twin Pivots LIB sensor ready - If fitting bar and no carriers – Must order K6170-Kit
$1,929.00
K8170L
$780.00
K8170R
$780.00
K1058
$905.00
K1064
$905.00
K3900U
REAR BAR KITS
KITAMAU
Twin Pivots LIB sensor ready, LHS Carrier - Alloy Wheels, RHS Carrier - Alloy Wheels
$3,380.00
KITAMAU-R-JCD
Twin Pivots LIB sensor ready, RHS Carrier - Alloy Wheels, LHS Double Jerry Can Holder
$3,480.00
KITAMAU-L-JCD
Twin Pivots LIB sensor ready, LHS Carrier - Alloy Wheels, RHS Double Jerry Can Holder
$3,480.00
K1064
K1058
KITAMAU
K8170R
KITAMAU-R-JCD
KITAMAU-L-JCD
BACK
October 11, 2016 12:17 PM
K8170L
www.kaymar.com.au
www.kaymar.com.au
BACK TO CONTENTS
October 11, 2016 12:17 PM
Page 175 NEXT PAGE
volkswagen
amarok
VOLKSWAGEN AMAROK SENSOR KIT READY
K6302
Wiring Loom
FLEET
WIRING LOOM
$335.00
OPERATORS
K6302
VOLKSWAGEN AMAROK SENSOR KIT READY
K0500LED
Telescopic Light
K6170-Kit
ACCESSORIES
$260.00
$69.00
Fleet vehicles like this Toyota can be fitted with combination carrier kits
K6170-KIT
Please contact Kaymar directly regarding fleet requirements
K0500LED
BACK
October 11, 2016 12:17 PM
www.kaymar.com.au
www.kaymar.com.au
BACK TO CONTENTS
October 11, 2016 12:17 PM
Page 177 NEXT PAGE
fleet
operators
Accessories
& components
FLEET VEHICLES ONLY
REAR BAR
Replacement Rear Bar/Tow Bar with Twin Wheel Carrier on single arm for Landcruiser 78
KITFL1000
ACCESSORIES
LED SIGNAL LIGHTS
K6121
LED - Stop/Tail/Flasher
$66.00
K6121R
LED - Stop/Tail/Flasher/Reverse
$66.00
K6123L
LED - LHS S/T/F/Reverse Full Length
$66.00
K6123R
LED - RHS S/T/F/Reverse Full Length
$66.00
K6127
LED - Stop/Tail/Flasher - Left
$66.00
K6127R
LED - Stop/Tail/Flasher - Right
$66.00
K6122-KIT
LED Retro Kit
$155.00
K6004
LED Work Light
$125.00
K6121
K6121R (includes reversing light)
Please Note: All warranty issues for this
item are to be taken to the manufacturer
directly - LED Technology
Ph: (03) 9466 7075
K6123L
K6123R
K6127 & K6127R
Replacement OzBar Signal Lights
K6004
K6122-KIT LED retro kit in pack
OzBar_K6044L_and_K6044R
BACK
October 11, 2016 12:17 PM
www.kaymar.com.au
www.kaymar.com.au
BACK TO CONTENTS
October 11, 2016 12:17 PM
Page 179 NEXT PAGE
Accessories
& components
Accessories
& components
ACCESSORIES
GAS STRUTS
K6195
Retro Gas Strut Kit for LC100
$165.00
STD CARRIER INNER MOUNT
IMAGES FOR IDENTIFICATION
Inner for K1100 LC80 Standard and RV - Left side
K6196
Retro Gas Strut Kit for LC80/75/78/Patrol GU1-4
$165.00
“
K1110 LC80 Standard and RV - Right side
K6194
Replacement Gas Strut - single
$50.00
“
K1120 LC100 IFS Turbo Diesel, Lexus & V8 - Left side
K6198
Replacement Gas Strut Lock - pair (left & right)
$55.00
“
K1150 LC100 Live Axle - Left side
“
K1160 LC100 Live Axle - Right side
K6195
ACCESSORIES
K6196
To Suit K1120
To Suit K1150
K6198
K6194
To Suit K1160
To Suit K1110
BACK
October 11, 2016 12:17 PM
www.kaymar.com.au
www.kaymar.com.au
BACK TO CONTENTS
To Suit K1100
October 11, 2016 12:17 PM
Page 181 NEXT PAGE
WARRANTY
WARRANTY
3. CLAIMS MADE UNDER WARRANTY
1. WARRANTY AGAINST DEFECTS
1.1
Kaymar 4WD Accessories warrants that the rights and remedies
to the Customer in this Agreement for warranty against defects are in
addition to the rights and remedies of the Customer under any applicable
Law in relation to the goods and services to which the warranty relates.
1.2
Kaymar 4WD Accessories does not purport to restrict, modify or
exclude any liability that cannot be excluded under the Competition and
Consumer Act 2010 (Cth) or any related or complementary legislation or
regulations as in force and amended from time to time.
3.1.1 The Customer must send the claim in writing together with proof of
purchase and clear descriptive photos showing the reason for the claim
to Kaymar 4WD Accessories’ at 90 Beresford Road, Lilydale VIC 3140; or
3.1.2 The Customer must email the claim together with the proof of
purchase and clear descriptive photos showing the reason for the claim
to Kaymar 4WD Accessories at [email protected] or
3.1.3 The Customer must contact Kaymar 4WD Accessories on 03-9739
4110.
Warranty for Services
1.3
Kaymar 4WD Accessories warrants that for Services supplied by
Kaymar 4WD Accessories is free from defects in workmanship for a period
of one (1) year from the date of completion of the works, unless otherwise
specified in writing by Kaymar 4WD Accessories.
1.4
The Customer warrants that it will report any defect in any Service
provided within thirty (30) days from the date that the defect became
apparent (time being of the essence).
1.5
To the extent permitted by law as read in conjunction with Clause
1.2, Kaymar 4WD Accessories liability in respect of defective services will
be limited to:
1.5.1
the re-supply of the Service; or
1.5.2
the payment of the cost of having the Services supplied again; or
1.5.3 the refund of the Price paid by the Customer in respect of the
Service and/or credit the account.
1.6
In respect of all claims Kaymar 4WD Accessories shall not
be liable to compensate the Customer for any reasonable delay in
remedying the defective Services or in assessing the Customer’s claim.
The Customer warrants that it will use its best endeavors to assist the
Supplier with identifying the nature of the defective Service claim.
Warranty for Goods
1.7
Kaymar 4WD Accessories warrants that the Goods manufactured
by Kaymar 4WD Accessories are free from defects for a period of one (1)
year from the date of delivery of the Goods unless otherwise specified in
writing by Kaymar 4WD Accessories.
1.8
The Customer warrants that it will report any defect in any Goods
supplied within thirty (30) days from the date that the defect became
1.9
3.1
Subject to clause 1, claims for warranty should be made in one of
the following ways:
Kaymar 4WD Accessories warrants:
Our goods come with guarantees that cannot be excluded under the
Australian Consumer Law. You are entitled to a replacement or refund for
a major failure and compensation for any other reasonably foreseeable
loss or damage. You are also entitled to have the Goods repaired or
replaced if the Goods are not of acceptable quality and the failure does
not amount to a major failure.
3.2
Goods where a claim is made are to be returned to the Kaymar
4WD Accessories or are to be left in the state and conditions in which they
were delivered until such time as the Kaymar 4WD Accessories or its Agent
has inspected the Goods. Such inspection is to be carried out within a
reasonable time after notification.
3.3
Kaymar 4WD Accessories will not accept any claim and/or returns
without a valid proof of purchase.
3.4
Kaymar 4WD Accessories will use its best endeavors to assist the
Customer with any claim with respect of the Goods
3.5
Kaymar 4WD Accessories shall not be liable to compensate the
Customer for any delay in replacing the defective Goods or remedying
the defective Services or in properly assessing the Customer’s claim.
3.6
The Customer will bear all freight charges for the return of faulty
products including the costs of removal and replacement of the faulty
products.
4. EXCLUSION OF LIABILITY & USE OF PRODUCTS
Replacement Bar and/or Tow Bars
4.1
Kaymar 4WD Accessories strongly recommends the following:
4.1.1 Only Kaymar manufactured tow hitches are to be used in Kaymar
bars.
4.5.5
Alteration or tempering by third party.
4.5.6
Colour coding by third party.
4.5.7
Damage to Kaymar product due to faulty LED lights.
4.5.8
Failure to hammer down lock tab washers.
4.2.11 Gas strut lock should be open when closing carrier or jerry can
holder.
4.2.12 Kaymar product must be fitted strictly in accordance with Kaymar
fitting instructions.
4.2.13 Owner/user fitted items such as padlocks and other non-Kaymar
accessories must be suitably restrained so as to not vibrate or cause
vehicle damage
Telescopic Lights
4.3
Vehicles should not be driven with telescopic lights in “up”
position, or be used as a reverse light.
Jack Holders and H/F Aerial Brackets
4.4
4.4.1
use.
Kaymar 4WD Accessories strongly recommends the following
4.5.10 Driving with any carrier open.
4.5.11 Damage caused by owner/user fitted items such as padlocks and
other non-Kaymar accessories which have not been suitably restrained so
as to not vibrate or cause vehicle damage
4.5.12 Failure or damage to Kaymar products as a result of accident,
misuse and abuse of Kaymar products including failure to comply
with instructions for the use of products.
4.5.13 For Services provided by Kaymar 4WD Accessories are repaired,
altered or overhauled by the Customer or caused to be repaired,
altered or overhauled by the Customer without Kaymar 4WD
Accessories’s consent, the warranty shall cease and Kaymar 4WD
Accessories shall thereafter in no circumstances be liable under the
terms of the warranty.
Jack Holder and/or H/F Aerial should be removed when not in
4.4.2 Jack Base Section should be fitted firmly against the tyre when
fitted to Kaymar carrier.
4.5
To the extend permitted by law, Kaymar 4WD Accessories’
warranty will cease on any Kaymar manufactured product if:
Rust caused by salt water;
4.5.1
Incorrect fitting, installation, or wiring.
A.C.N 069 670 686,
trading as KAYMAR 4WD ACCESSORIES
Exclusion of Liability
4.5.1
KAYMAR ENGINEERING PTY LTD,
of 90 Beresford Road, Lilydale VIC 3140
Carrier and Jerry Can Holders
4.2
4.2.1 Top Bearings including dust cap must be fully greased when
installed.
2. WARRANTY FOR LED SIGNAL LIGHTS
October 11, 2016 12:17 PM
4.2.10 Lock tab washers must be hammered down onto bolt head in the
topslide mount.
4.1.8 Kaymar rear bars can not be altered and/or modified in any way,
shape or form.
4.2.3 Vehicle should not be driven with carrier or jerry can holder open
and/or locked in open position.
BACK
Corrosion caused by chemicals.
4.1.7 Tow hitch heights should at all relevant times be as close to the
normal standards.
1.11.5 The repair of the Goods
2.2
Faulty LED lights should be tested by using fully charged 12 volt
battery prior to the return.
Failure to maintain and service product.
4.5.4
4.1.6 Customer should galvanise to protect bar and/or tow bar from
rust in a salt water environment.
4.2.2 Carrier and Jerry Can Holders should be removed, clean and regreased, as well as bearings every 12 months.
2.1
Kaymar 4WD Accessories provides 3 years warranty for faulty
parts and for workmanship.
4.5.3
4.2.9 Customer should galvanise to protect Carriers from rust in a salt
water environment.
4.1.5 All related bolts should be inspected on a regular basis.
4.1.10 Owner/user fitted items such as padlocks and other non-Kaymar
accessories must be suitably restrained so as to not vibrate or cause
vehicle damage
1.11.4 The payment of the cost of having the Goods repaired;
4.2.8 All Carriers will take up to and including 33” wheels.
4.1.4 Load capacity and ball load should be adhered to in
accordance with the Customers standard vehicle rating.
1.11 If the Goods are not of a kind ordinarily acquired for personal,
domestic or household use or consumption, the Kaymar 4WD Accessories
liability for a consumer guarantee under the Australian Consumer Law
in relation to those Goods is limited to, at the discretion of Kaymar
4WD Accessories:
1.11.3 The replacement of the Goods or supply of equivalent Goods;
Failure to grease bearings.
4.1.3 Jacking must only be done off the jacking points in the bar and/or
tow bars, and in accordance with safe jacking practices.
1.11.2 The payment of the cost of providing the Goods again;
4.5.2
4.1.2 Kaymar 4WD Accessories does not recommend the use of weight
distribution hitches.
1.10 The Customer acknowledges that additional costs incurred, such
as labour and/or freight, will be borne by the Customer.
1.11.1 The resupply of the Goods;
4.2.7 All bolts must be inspected on a regular basis.
4.2.4 The lock open pin or bracket should be released before closing
carrier or jerry can holder.
4.2.5 The tyres must be positioned firmly against the carrier frame.
www.kaymar.com.au
4.2.6 Carrier with central wheel number plate bracket should ensure the
number plate sits against the tyres bottom edge.
www.kaymar.com.au
www.kaymar.com.au
BACK TO CONTENTS
October 11, 2016 12:17 PM
Page 183 NEXT PAGE
OzBar
By Kaymar
PRODUCT CATALOGUE
Proudly a Member of:
2016
issue date : August 2016
TO OPEN CLICK HERE
CONTENTS
INTERACTIVE
click on the contents item to go direct to the page
MAKE/MODEL
PAGE
OzBar - from the World Leading Australian
Manufacturer of 4X4 Rear Bars, Wheel Carriers and
Jerry Can Holders
When you fit an OzBar Rear Bar to your vehicle some of the benefits include...
TOYOTA
Rear End protection of your vehicle, Carry two Spare Wheels or a Spare Wheel and
Jerry Cans. Plus facility to add mounts for hilift jack, aerial and worklight on the carrier
arms.
LC100 IFS7
LC100 LA11
LC8015
NISSAN
Where can you see an OzBar?
PATROL GU119
Check our website for the current distributor listing.
PATROL GU423
Distributors with an ‘O’ next to their listing have OzBar demonstration products in their
stores.
Why invest in an OzBar rear bar?
Please note: Every effort has been made
to ensure the accuracy of information in
this catalogue, however, Kaymar takes
no responsibility for inadvertent errors. We
recommend you check product suitability with
your distributor prior to purchase.
Displayed prices are recommended selling
price including GST. Freight and fitting charges
are not included.
The OzBar series is designed specifically for serious off-roaders with workhorse
vehicles where functionality and toughness is a little more important than great
looks. While not sporting the deluxe finish of the Kaymar branded product the
performance and life span attributes are the same.
Australian owned
Kaymar is wholly Australian owned with more than 30 years proven design and
manufacturing excellence and reliability building rear bars and accessories for
outback travellers throughout Australia and now exporting across the world.
Rear end protection
Toughening the rear end of a vehicle with the steel protection of an OzBar
delivers improved impact resilience over a factory standard vehicle.
Spare wheel capacity
Two carrier pivots are provided on all rear bars enabling the fitting of two swing
open carriers for carrying a combination of spare wheels and/or jerry cans
- depending on the vehicle body style. The ability to safely carry and easily
access multiple spare wheels can be a life saver for bush drivers.
Design and manufacture
Designed and manufactured in Australia.
Each bar in the range is custom designed at Kaymar’s plant in Lilydale, Victoria
to suit specific vehicle models ensuring the most effective fit to the body style
and importantly to gain the maximum mounting strength by matching the bar
fixing brackets to all available chassis mounting points. Working prototypes are
thoroughly road tested and load approved ahead of going into production.
BACK
October 11, 2016 12:17 PM
www.kaymar.com.au
www.kaymar.com.au
BACK TO CONTENTS
October 11, 2016 12:17 PM
Page 5
NEXT PAGE
OzBar
Precision
The manufacturing process involves robotic welding stations, high tech laser
cutters and expert operators, welders and finishers to turn out precision made
product every time.
Finishing
Completion of every bar includes protective zinc electroplating.
External finishing is completed by powder coating in stain black.
TOYOTA
LC100 IFS
Independant suspension
Features
• Over centre carrier locks for positive, secure locking in all conditions.
• Carriers are fitted with stainless steel gas struts to assist opening and hold
open.
• Heavy duty pivot points and carrier bearings.
• ADR approved LED signal lights fitted to all bars.
• Integral HiLift jack points provided.
LandCruiser 100IFS with Replacement Bar, Spare Wheel Carrier and Double Jerry Can Holder
BACK
October 11, 2016 12:17 PM
www.kaymar.com.au
www.kaymar.com.au
BACK TO CONTENTS
October 11, 2016 12:17 PM
Page 7
NEXT PAGE
TOYOTA
LC100 IFS
OZ1010
Twin Pivots LIB
TOYOTA
LC100 IFS
REAR BAR
$1,570.00
OZ1010
OZKIT100IFS
Twin Pivots LIB, LHS and RHS Carrier (steel wheels)
OZKIT100IFS-R-JCD
Twin Pivots LIB, RHS Carrier (steel wheels), LHS Double Jerry LANDCRUISER 100 LIVE AXLE, IFS TURBO DIESEL, LEXUS & V8
OZ1130L
$570.00
OZ1130R
$570.00
OZ1110
$570.00
REAR BAR KITS
$2,650.00
Can Holder
$2,650.00
OZ1110
OZKIT100IFS
OZKIT100UIFS-R-JCD
OZ1130R
OZ1130L
BACK
October 11, 2016 12:17 PM
www.kaymar.com.au
www.kaymar.com.au
BACK TO CONTENTS
October 11, 2016 12:17 PM
Page 9
NEXT PAGE
OzBar
TOYOTA
LC100 IFS
TOYOTA
LC100 LA
LIVE AXLE
LOCK PLATES
K0169-Kit
$95.00
K0169NP-Kit
$196.00
K0169-Kit
K0169NP-Kit
LandCruiser 100 LA with Replacement Bar,Twin Wheel Carrier and Double Jerry Can Kit
BACK
October 11, 2016 12:17 PM
www.kaymar.com.au
www.kaymar.com.au
BACK TO CONTENTS
October 11, 2016 12:17 PM
Page 11
NEXT PAGE
TOYOTA
LC100 LA
TOYOTA
LC100 LA
OZ1030
REAR BAR
Twin Pivots LIB
$,1570.00
OZ1030
OZKIT100LA
OZ1120L
$570.00
OZ1120R
$570.00
OZ1110
$570.00
REAR BAR KITS
Twin Pivots LIB, LHS Carrier (steel wheels), RHS Carrier steel wheels)
OZKIT100LA-R-JCD
LANDCRUISER 100 LIVE AXLE, IFS TURBO DIESEL, LEXUS & V8
Twin Pivots LIB, RHS Carrier (steel wheels), LHS Double Jerry
$2,650.00
Can Holder
$2,650.00
OZ1110
OZKIT100LA
OZKIT100LA-R-JCD
OZ1120R
OZ1120L
BACK
October 11, 2016 12:17 PM
www.kaymar.com.au
www.kaymar.com.au
BACK TO CONTENTS
October 11, 2016 12:17 PM
Page 13
NEXT PAGE
OzBar
TOYOTA
LC100 LA
TOYOTA
LC80
LOCK PLATES
K0175-Kit
$90.00
K0175NP-Kit
$100.00
K0175-Kit
K0175NP-Kit
BACK
October 11, 2016 12:17 PM
www.kaymar.com.au
www.kaymar.com.au
BACK TO CONTENTS
October 11, 2016 12:17 PM
Page 15
NEXT PAGE
TOYOTA
Lc80
TOYOTA
Lc80
LANDCRUISER 80 GXL, STD and RV
OZ1000
REAR BAR
$1,570.00
OZ1000
OZKIT80
OZ1100L
$570.00
OZ1100R
$570.00
OZ1110
$570.00
REAR BAR KITS
Twin Pivots Upgrade LIB, LHS Carrier (steel wheels), RHS Carrier (steel wheels)
$2,650.00
OZKIT80-R-JCD Twin Pivots Upgrade LIB, RHS Carrier (steel wheels), LHS Dble Jerry Can
$2,650.00
OZ1110
OZKIT80
OZKIT80-R-JCD
OZ1100L
OZ1100R
BACK
October 11, 2016 12:17 PM
www.kaymar.com.au
www.kaymar.com.au
BACK TO CONTENTS
October 11, 2016 12:17 PM
Page 17
NEXT PAGE
OzBar
TOYOTA
Lc80
ACCESSORIES FOR REAR BAR
OZ1400-KIT
OZ1400NP-KIT
nissan
patrol gu1
OZ1400-KIT
OZ1400NP-KIT
OZ1300
$200.00
OZ1310
$200.00
K6144
Pivot Cover
$14.00
K0500LED
Telescopic Light - Fits to RHS OZBAR Carrier ONLY
OZ1300
$260.00
OZ1310
GU 4 with Replacement Rear Bar and Twin Wheel Carriers
K6144
BACK
October 11, 2016 12:17 PM
K0500LED
www.kaymar.com.au
www.kaymar.com.au
BACK TO CONTENTS
October 11, 2016 12:17 PM
Page 19
NEXT PAGE
nissan
patrol gu1
NISSAN GU1 PATROL Pre 10/04
OZ1021
nissan
patrol gu1
$1,620.00
OZ1020
NISSAN GU1 PATROL
OZKITGU1
OZ1100L
$570.00
OZ1100R
$570.00
OZ1110
$570.00
OZKITGU1-R-JCD
NISSAN GU1 PATROL
$2,700.00
0Twin Pivots LIB, RHS Carrier - Alloy Wheels, LHS Double Jerry Can Holder
$2,700.00
OZ1110
OZKITGU
OZKITGU-R-JCD
OZ1100L
OZ1100R
BACK
October 11, 2016 12:17 PM
www.kaymar.com.au
www.kaymar.com.au
BACK TO CONTENTS
October 11, 2016 12:17 PM
Page 21
NEXT PAGE
OzBar
nissan
patrol gu
NISSAN GU1 PATROL
nissan
K0181-Kit
$102.00
K0181NP-Kit
$168.00
patrol gu4
K0181NP-KIT
K0181-KIT
Y
LI
R
A
R
O
P
M
E
T
E
L
B
A
LI
A
V
A
N
U
GU 4 with Replacement Rear Bar and Twin Wheel Carriers
K0500LED
BACK
October 11, 2016 12:17 PM
www.kaymar.com.au
www.kaymar.com.au
BACK TO CONTENTS
October 11, 2016 12:17 PM
Page 23
NEXT PAGE
nissan
patrol gu4
nissan
patrol gu4
NISSAN GU4 PATROL 10/04+
OZ1024
$1,570.00
OZ1020
OZKITGU4
Y
LI
R
OZ1140L
$570.00
OZ1140R
$570.00
OZ1110
$570.00
E
L
A
R
O
P
M
E
B
A
IL
OZKITGU
A
R
$2,650.00
T
A
N
U
O
P
OZKITGU-R-JCD
E
L
B
A
LI
OZ1110
M
E
A
V
Y
IL
R
$2,650.00
0Twin Pivots LIB, RHS Carrier - Alloy Wheels, LHS Double Jerry Can Holder
T
OZKITGU4-R-JCD
A
V
A
N
U
OZ1140L
OZ1140R
BACK
October 11, 2016 12:17 PM
www.kaymar.com.au
www.kaymar.com.au
BACK TO CONTENTS
October 11, 2016 12:17 PM
Page 25
NEXT PAGE
nissan
patrol gu4
WARRANTY
K0181-Kit
$102.00
K0181NP-Kit
$168.00
Y
LI
R
A
R
Warranty for Services
E
L
O
P
M
E
T
B
A
LI
1.3
Kaymar 4WD Accessories warrants that for Services supplied by
Kaymar 4WD Accessories is free from defects in workmanship for a
period of one (1) year from the date of completion of the works, unless
otherwise specified in writing by Kaymar 4WD Accessories.
1.4
The Customer warrants that it will report any defect in any Service
provided within thirty (30) days from the date that the defect became
1.5
To the extent permitted by law as read in conjunction with Clause
1.2, Kaymar 4WD Accessories liability in respect of defective services will
be limited to:
1.5.1
the re-supply of the Service; or
1.5.2
the payment of the cost of having the Services supplied again; or
1.5.3 the refund of the Price paid by the Customer in respect of the
Service and/or credit the account.
1.6
In respect of all claims Kaymar 4WD Accessories shall not be liable
to compensate the Customer for any reasonable delay in remedying the
defective Services or in assessing the Customer’s claim. The Customer
warrants that it will use its best endeavors to assist the Supplier with
identifying the nature of the defective Service claim.
A
V
Warranty for Goods
1.7
Kaymar 4WD Accessories warrants that the Goods manufactured
by Kaymar 4WD Accessories are free from defects for a period of one (1)
year from the date of delivery of the Goods unless otherwise specified in
writing by Kaymar 4WD Accessories.
A
N
U
1.1
Kaymar 4WD Accessories warrants that the rights and
remedies to the Customer in this Agreement for
warranty against defects are in addition to the rights and remedies of the
Customer under any applicable Law in relation to the goods and services
to which the warranty relates.
1.2
Kaymar 4WD Accessories does not purport to restrict, modify or
exclude any liability that cannot be excluded under the Competition and
Consumer Act 2010 (Cth) or any related or complementary legislation or
regulations as in force and amended from time to time.
K0181NP-KIT
K0181-KIT
1. WARRANTY AGAINST DEFECTS
1.11.2 The payment of the cost of providing the Goods again;
1.11.3 The replacement of the Goods or supply of equivalent Goods;
1.11.4 The payment of the cost of having the Goods repaired;
1.11.5 The repair of the Goods
www.kaymar.com.au
3.2
Goods where a claim is made are to be returned to the Kaymar
4WD Accessories or are to be left in the state and conditions in which they
were delivered until such time as the Kaymar 4WD Accessories or its Agent
has inspected the Goods. Such inspection is to be carried out within a
reasonable time after notification.
3.3
Kaymar 4WD Accessories will not accept any claim and/or returns
without a valid proof of purchase.
3.4
Kaymar 4WD Accessories will use its best endeavors to assist the
Customer with any claim with respect of the Goods
3.5
Kaymar 4WD Accessories shall not be liable to compensate the
Customer for any delay in replacing the defective Goods or remedying
the defective Services or in properly assessing the Customer’s claim.
3.6
The Customer will bear all freight charges for the return of faulty
products including the costs of removal and replacement of the faulty
products.
4. EXCLUSION OF LIABILITY & USE OF PRODUCTS
Replacement Bar and/or Tow Bars
4.1
4.1.1 Only Kaymar manufactured tow hitches are to be used in Kaymar
bars.
4.1.2 Kaymar 4WD Accessories does not recommend the use of weight
distribution hitches.
4.1.3 Jacking must only be done off the jacking points in the bar and/or
tow bars, and in accordance with safe jacking practices.
2.1
Kaymar 4WD Accessories provides 3 years warranty for faulty parts
and for workmanship.
2.2
Faulty LED lights should be tested by using fully charged 12 volt
battery prior to the return.
www.kaymar.com.au
4.1.5 All related bolts should be inspected on a regular basis.
4.1.7 Tow hitch heights should at all relevant times be as close to the
normal standards.
4.1.8 Kaymar rear bars can not be altered and/or modified in any way,
shape or form.
Carrier and Jerry Can Holders
4.2
4.2.1 Top Bearings including dust cap must be fully greased when
installed.
4.2.2 Carrier and Jerry Can Holders should be removed, clean and regreased, as well as bearings every 12 months.
4.2.3 Vehicle should not be driven with carrier or jerry can holder open
and/or locked in open position.
4.2.4 The lock open pin or bracket should be released before closing
carrier or jerry can holder.
4.2.5 The tyres must be positioned firmly against the carrier frame.
2. WARRANTY FOR LED SIGNAL LIGHTS
October 11, 2016 12:17 PM
3.1.3 The Customer must contact Kaymar 4WD Accessories on 03-9739
4110.
4.1.6 Customer should galvanise to protect bar and/or tow bar from rust
in a salt water environment.
Kaymar 4WD Accessories warrants:
1.11.1 The resupply of the Goods;
BACK
3.1.2 The Customer must email the claim together with the proof of
purchase to Kaymar 4WD Accessories at [email protected]. or
1.9
1.11 If the Goods are not of a kind ordinarily acquired for personal,
domestic or household use or consumption, the Kaymar 4WD Accessories
liability for a consumer guarantee under the Australian Consumer Law
in relation to those Goods is limited to, at the discretion of Kaymar 4WD
Accessories:
K0500LED
3.1.1 The Customer must send the claim in writing together with proof of
purchase to Kaymar 4WD Accessories’ at 90 Beresford Road, Lilydale VIC
3140; or
4.1.4 Load capacity and ball load should be adhered to in accordance
with the Customers standard vehicle rating.
1.10 The Customer acknowledges that additional costs incurred, such as
labour and/or freight, will be borne by the Customer.
3.1
Subject to clause 1, claims for warranty should be made in one of
the following ways:
1.8
The Customer warrants that it will report any defect in any Goods
supplied within thirty (30) days from the date that the defect became
Our goods come with guarantees that cannot be excluded under the
Australian Consumer Law. You are entitled to a replacement or refund for
a major failure and compensation for any other reasonably foreseeable
loss or damage. You are also entitled to have the Goods repaired or
replaced if the Goods are not of acceptable quality and the failure does
not amount to a major failure.
3. CLAIMS MADE UNDER WARRANTY
BACK TO CONTENTS
4.2.6 Carrier with central wheel number plate bracket should ensure the
number plate sits against the tyres bottom edge.
4.2.7 All bolts must be inspected on a regular basis.
4.2.8 All Carriers will take up to and including 33” wheels.
4.2.9 Customer should galvanise to protect Carriers from rust in a salt
October 11, 2016 12:17 PM
Page 27
NEXT PAGE
WARRANTY
water environment.
4.5.10 Driving with any carrier open.
4.2.10 Lock tab washers must be hammered down onto bolt head in the
topslide mount.
4.5.11 Failure or damage to Kaymar products as a result of accident,
4.2.11 Gas strut lock should be open when closing carrier or jerry can
holder.
misuse and abuse of Kaymar products including failure to comply with
instructions for the use of products.
4.5.12 For Services provided by Kaymar 4WD Accessories are repaired,
Telescopic Lights
altered or overhauled by the Customer without Kaymar 4WD
4.3
Accessories’s consent, the warranty shall cease and Kaymar 4WD
Vehicles should not be driven with telescopic lights in “up” position,
or be used as a reverse light.
altered or overhauled by the Customer or caused to be repaired,
Accessories shall thereafter in no circumstances be liable under the terms
of the warranty.
Jack Holders and H/F Aerial Brackets
4.4
Kaymar 4WD Accessories strongly recommends the following
KAYMAR ENGINEERING PTY LTD,
4.4.1
Jack Holder and/or H/F Aerial should be removed when not in use.
A.C.N 069 670 686,
4.4.2
Jack Base Section should be fitted firmly against the tyre when
trading as KAYMAR 4WD ACCESSORIES
fitted to Kaymar carrier.
of 90 Beresford Road, Lilydale VIC 3140
Exclusion of Liability
4.5
To the extend permitted by law, Kaymar 4WD Accessories’
warranty will cease on any Kaymar manufactured product if:
4.5.1
Rust caused by salt water;
4.5.1
Incorrect fitting, installation, or wiring.
4.5.2
Failure to grease bearings.
4.5.3
Failure to maintain and service product.
4.5.4
Corrosion caused by chemicals.
4.5.5
Alteration or tempering by third party.
4.5.6
Colour coding by third party.
4.5.7
Damage to Kaymar product due to faulty LED lights.
4.5.8
Failure to hammer down lock tab washers.
www.ozbars.com.au
BACK
October 11, 2016 12:17 PM
www.kaymar.com.au
Toyota
FORTUNER
TOYOTA
FORTUNER
FORTUNER
K6111-1
FORTUNER
K6111-1
FORTUNER
K6111-1
$242.00
$242.00
$242.00
Toyota Fortuner wagon can be fitted with combination carrier kits
BACK
October 11, 2016 12:17 PM
www.kaymar.com.au
www.kaymar.com.au
BACK TO CONTENTS
October 11, 2016 12:17 PM
Page 31
NEXT PAGE
TOYOTA
FORTUNER
FORTUNER
K0183-Kit
TOYOTA
FORTUNER
LOCK PLATES
$86.00
FORTUNER
K6111-1
FORTUNER
K6111-1
FORTUNER
K0183-Kit
BACK
$242.00
LOCK PLATES
FORTUNER
K0116-Kit
$242.00
$86.00
LOCK PLATES
October 11, 2016 12:17 PM
$86.00
www.kaymar.com.au
FORTUNER
K6111-1
www.kaymar.com.au
BACK TO CONTENTS
October 11, 2016 12:17 PM
$242.00
Page 33
NEXT PAGE
TOYOTA
FORTUNER
FORTUNER
K0183-Kit
LOCK PLATES
FORTUNER
K0183-Kit
TOYOTA
FORTUNER
$86.00
FORTUNER
K6302
WIRING LOOM
Wiring Loom
LOCK PLATES
$86.00
FORTUNER
FORTUNER
K0116-Kit
$335.00
ACCESSORIES
K0500LED
Telescopic Light
K6170-Kit
$260.00
$69.00
LOCK PLATES
$86.00
K0500LED
BACK
October 11, 2016 12:17 PM
www.kaymar.com.au
www.kaymar.com.au
BACK TO CONTENTS
October 11, 2016 12:17 PM
Page 35
NEXT PAGE
holden
colorado
holden
7
7
K3940
REAR BAR
$1,929.00
colorado
K3940
REAR BAR KITS
KITCOL
$3,350.00
KITCOL-L-JCD
Twin Pivots LIB No Sensors, LHS Carrier - Alloy Wheels, RHS Double Jerry Can Holder
$3,450.00
KITCOL-R-JCD
Twin Pivots LIB No Sensors, RHS Carrier - Alloy Wheels, LHS Double Jerry Can Holder
$3,450.00
KITCOL
Colorado 7 with wheel carrier and jerry can holder
BACK
October 11, 2016 12:17 PM
www.kaymar.com.au
www.kaymar.com.au
BACK TO CONTENTS
October 11, 2016 12:17 PM
Page 37
NEXT PAGE

COMPONENT CATALOGUE

Transcription

Similar documents

Where you come to know.

Supermarket 7/01 reprint

Click here to their catalogue

Mr. RHS - Advocate News

For Release: Nissan Patrol Y62 ST-L, TI, TI-L Replacement

SF17002 - MicroBruteARMBoard

PERRYHOMES.com

Bill of Lading