LED WaLL Star

Comments

Transcription

LED WaLL Star
LED Wall Star
Dimmable!
Description
Die cast aluminum surface or recessed mount LED light fixture of
only 5.2 watts. Dimmable. 120VAC input and output of fixture
up to 150 fixtures per 15A tap. Replaceable 120VDC LED module
included. UL listed Wet Location. Offered in three cover styles
and four fixture finishes.
Schematics
51/58"1/8"
5 /8"
5 /8"
6 3/68"3/ 8"
Cover
Diameter
2 1/28"1/ 8"
Mounting Hole
Locations
2 1/22"1/2"
3 /4"
3 /4"
515/81"/8"
5 /58"
/8"
6 63/ 83"/ 8"
2 12/21"/2"
2 12/ 81"/ 8"
5 "5 "
2 12/21"/2"
5 "5 "
1 11/21"/2"
Recessed, White
Prism Cover
• Die cast aluminum cover and can.
Corrosion resistant powder coating.
Suitable for concrete pour.
• Replaceable 120VDC LED Module
• Pleasingly warm color
temperature of 3100K
• Dimmable
4 74/87"/8"
Scoop
Louver, Prism
3 /34"
/4"
Features
5 /58"
/8"
4 74/87"/8"
• Three cover designs:
Louver, Prism and Scoop
• Four cover color options:
White, Black, Bronze
or Aluminum
• Mounting flange for
recessed mounting
• Can be surface
mounted or recessed
into any hole 5” diameter
and 3” deep
• LED Wall Star has
“Knock-off” tabs for
surface mounting
26
• Push-In 120V connectors
(no wire nuts required)
• Room for 120V interconnection
• Numerous 120V 1/2” NPT fittings for standard RomexTM input
Suitable for
• Wet locations
• Insulation contact
• Wall mount
• Showers
• Use in poured
concrete
National Specialty Lighting 2014 - 2015
4 7/48"7/8
5 "5 "
LED Wall Star
Dimmable!
Specifications
Dimming
Agency Approval
Warranty
120VAC power input.
120VAC, 43mA, 5.2 watts
Replaceable 120VDC LED Module rated at 40,000 hours
3100K +/- 200K
Powder-coated white, black, bronze, or natural aluminum
Powder-coated white with white reflector
Both cover and can are die cast aluminum for corrosion protection, strength, weight, and consistency of finish
Frosted glass
120V can be parallel wired (“daisy chained”) up to 150 fixtures per 15A tap. One wire between each fixture
completes chain. No custom cord required. Check local code and NEC for wiring selection.
Dimmable with specified 120VAC dimmer. See instructions for details.
UL listed and labeled wet and IC locations. Wall or surface mount only. Suitable for concrete pour.
Two years. See back cover for details.
COver options
led products
Voltage
Fixture Energy Rating
LED Module Life
LED Color Temperature
Cover Finish
Can Finish
Construction
Lens
Wiring Options
Photometrics
on page 56
Applications
4 Interior steps
4 Exterior steps
4 Aisles
4 Halls
4 Paths
4 Patio lighting
Scoop
Louver
Prism
ordering logic
Bronze
Z = Cover Type
LWS-Z-YY
L = Louver Cover
S = Scoop Cover
P = Prism Cover
mounting options
Recessed
4 Post lighting
4 Showers
fixture color options
White
4 Entry lighting
Black
Aluminum
YY = FIXTURE COLOR
Note:
WH = White
BZ = Bronze
BK = Black
AL = Aluminum
All fixtures have the flexibility to
be recessed or surface mounted
Accessories
Surface mount
All photos and illustrations © 2015 National Specialty Lighting
Wall Star Concrete Cap
WL-CC
Required for all concrete pour
and brick wall applications.
Replaceable LED Module
LEDMOD-32-FF
27