Murray Feiss OL7411ASTB

Assembly Instructions For
http://www.elitefixtures.com/index.cfm/manufacturer/Murray-Feiss-Lighting.html
OL7411
(E) 5/09
2
1C
29"
36-1/2"
1A
42-1/2"
48-1/2"
54-1/2"
1B
60-1/2"
66-1/2"
72-1/2"
78-1/2"
84-1/2"
IMPORTANT
TURN OFF THE POWER AT THE MAIN FUSE OR
CIRCUIT BREAKER BOX
BEFORE STARTING INSTALLATION
4C
Carefully unpack and identify all parts before assembly.
Bulbs not included.
4B
3
4A
5
1. This fixture can be mounted onto ceiling either as stem
hung or semi flush mount:
STEM HUNG INSTALLATION- Fig. 1:
A. Choose desired installation height from dimensions
shown in above diagram. Thread fixture wires through
each stems to be used. Note correct position of stems
from left diagram. Screw all stem together until secure.
B. Install bottom end of stem assembly by screwing on
top of fixture.
C. Pass fixture wire through swivel in canopy and screw
top end of stem assembly onto swivel.
FIG.1
SEMI FLUSH INSTALLATION-Fig. 2:
A. Remove and discard swivel.
B. Threaded fixture wires through canopy, lock washer,
and hex nut. Lock all together on top of fixture by
tightening hex nut.
1B
1A
2. Follow enclosed supplement installation instructions
for electrical and fixture installation onto house outlet
box. If you do not have an outlet box at desired
location to attach the fixture than hire a qualified
electrician to create one.
3. Lift latch to open door.
4. A. Slip candle tube over socket.
B. Install candle follower over candle tube.
C. Install type-B, candelabra base, of 60 Watt maximum
bulbs (not included).
5. Close door.
FIG.2
SEMI FLUSH MOUNT
http://www.elitefixtures.com/index.cfm/manufacturer/Murray-Feiss-Lighting.html