vehicle wrap guide

vehicle wrap guide
KNOWLEDGE
IS POWER
Welcome to The Wrap Pack - a knowledge hub for the trade,
containing product support, videos, gallery, product and
application bulletins, hints, tips and FAQs about vehicle wrapping.
We’re offering our knowledge of the tools and materials we
supply, to help you in your vehicle wrap applications.
For more useful information visit our new trade website:
www.vehiclewrapfilms.co.uk
Vehicle Wrapping Films
With the increasing popularity
of vehicle wrapping as a
business advertising medium,
we can supply a range of
films and accessories to achieve
outstanding results.
02
Create an exciting first impression
A smartly wrapped vehicle can reinforce your company’s brand
and reassure customers they’re dealing with experts. Vehicle
wraps capture the attention of potential customers - “…on
average a commercial vehicle can be seen by 3,000 people every
hour…” Independent survey carried out in December 2008.
Protect your business reputation
70% of consumers are more likely to employ a company’s
services based on the appearance of their vehicles. With vehicle
wraps, every mile you drive can help promote your business.
Protect your assets and increase their resale value
Vehicle wraps will protect your paintwork against stone chips
and minor abrasions. The wrap can be fully removed at the end
of the vehicles use maximising the potential resale value.
The best thing about vinyl wrapping is that there’s no four
week wait. A full wrap can be completed in just two days
from start to finish. And with decent bodywork, it will look
just as good as a re-spray but can cost half the price.
Mark Riccioni, Max Power
03
FILMS FOR DIGITAL PRINT
Controltac IJ380 Series
An extremely flexible 50 micron film, suitable for the most challenging
vehicle wraps. It will conform into deep or U shape recessed panels and
compound contours without the need for stress cuts.
Featuring 3M’s unique pressure-activated Controltac adhesive.
Microscopic glass beads lie on the surface of the adhesive to enable
you to slide and reposition the film over the substrate. Once in place
apply firm squeegee pressure to break the beads into the adhesive to
give an instant bond.
Key Features:
MIN. APPLY
MPERATURE
• Highly conformable in recesses and deep channels
• Controltac adhesive for repositioning during application
• Excellent hiding power and opacity
Application Temperature (Celsius)
+15°C minimum
Film Type
Cast
Code/Colour:
Max. Durability
10 years
IJ380-10 Gloss White
IJ380-20 Matt White
Surface Type
Compound Curves, Corrugations,
Flat, Rivets, Simple Curves
Adhesive Type
Controltac Pressure-activated
Adhesive Colour
Grey
Removability
Permanent
Surface Finish
Gloss
Thickness (film)
50 µm
Recommended Overlaminate:
8580 8549L
8580M 8548G
POST HEATING
TEMPERATURE
18-21ºC
RECESS
TYPE
COLOUR
RANGE
80ºC
ADHESIVE
TYPE
Controltac
MATERIAL
FILM
MIN.
MIN.APPLY
APPLY
POST
POST
HEATING
HEATING DURABILITY
COLOUR
COLOUR
TYPE
THICKNESS
TEMPERATURE
TEMPERATURE
TEMPERATURE
TEMPERATURE
RANGE
RANGE
RECESS
RECESS
TYPE
TYPE
04
MATERIAL
MATERIAL
TYPE
TYPE
FILM
FILM
THICKNESS
THICKNESS
Deep /
U Shape
RECESS
ADHESIVE
ADHESIVE
TYPE
TYPE
TYPE
DURABILITY
DURABILITY
RECESS
RECESS
TYPE
TYPE
films for DIGITAL PRINT
Envision 480 Print Wrap Film
Ultra versatile to wrap just about anything. Envision offers leading edge
technology and best-in-class performance with a sustainability edge. As
the world’s first high-performance, non-PVC graphic film, 3M Envision
Print Wrap Film 480Cv3 outperforms not just non-PVC wrap films, but all
wrap films. They are also perfect for creating textured building graphics.
Combining Controltac and Comply v3 adhesive features for ultimate
repositionability and air release. Controltac technology allows you to
slide and reposition the graphic before activating the adhesive for perfect
results, whilst the Comply non-visible air channels enable fast and bubble
free application.
Key Features:
• Non PVC film environmentally friendly
• Controltac repositionable and Comply v3 air release adhesive
•Highly conformable and installs in extreme temperatures or on
textured surfaces
Code/Colour:
SV480-10Cv3 Gloss White Comply for solvent/eco-solvent printing
LX480-10Cv3 Gloss White Comply for latex printing
MIN. APPLY
EMPERATURE
Recommended Overlaminate:
8548G
8549L
POST HEATING
TEMPERATURE
20ºC
RECESS
TYPE
COLOUR
RANGE
100ºC
ADHESIVE
TYPE
Controltac
CV3
MIN.
MIN.APPLY
APPLY
POST
POST
HEATING
HEATING DURABILITY
COLOUR
COLOUR
MATERIAL
FILM
TEMPERATURE
TEMPERATURE
TEMPERATURE
TEMPERATURE
RANGE
RANGE
TYPE
THICKNESS
RECESS
RECESS
TYPE
TYPE
MATERIAL
MATERIAL
TYPE
TYPE
FILM
FILM
THICKNESS
THICKNESS
Application Temperature (Celsius)
+4°C minimum
+16°C on compound curves
Film Type
Non-PVC
Max. Durability
12 years
Surface Type
Compound Curves, Corrugations,
Flat, Rivets, Simple Curves
Adhesive Type
Controltac Pressure-activated and
Comply v3 Air Release
Adhesive Colour
Grey
Removability
Permanent
Surface Finish
Gloss
Thickness (film)
50 µm
Deep /
U Shape
ADHESIVE
ADHESIVE
RECESS
TYPE
TYPE
TYPE
DURABILITY
DURABILITY
RECESS
RECESS
TYPE
TYPE
05
FILMS FOR DIGITAL PRINT
Controltac IJ180 Series
A premium cast 50 micron film with a permanent, grey pigmented
adhesive for excellent hiding power. For digital print applications to flat
or moderately curved surfaces for car wraps and single step, shallow
recessed vans.
Combining Controltac and Comply v3 adhesive features for ultimate
repositionability and air release. Controltac technology allows you
to slide and reposition the graphic before activating the adhesive for
perfect results, whilst the Comply non-visible air channels enable fast
and bubble free application.
Key Features:
• For flat or moderately curved surfaces
• Controltac repositionable and Comply v3 air release adhesive
• Excellent hiding power and opacity
Application Temperature (Celsius)
+4°C minimum
+16°C on compound curves
Film Type
Cast
Code/Colour:
Max. Durability
10 years
Surface Type
Flat, Simple Curves, Compound
Curves, Corrugations, Rivets
Adhesive Type
Controltac Pressure-activated and
Comply v3 Air Release
Adhesive Colour
Grey
Removability
Permanent
Surface Finish
Gloss
Thickness (film)
50 µm
IJ180-10 Gloss White
IJ180-10Cv3 Gloss White Comply
IJ180C-10 Gloss White Comply
Recommended Overlaminate:
8518 8580M 8548G
8580 8549L
4-16ºC
100ºC
MIN.
MIN.APPLY
APPLY
POST
POSTHEATING
HEATING
TEMPERATURE
TEMPERATURE TEMPERATURE
TEMPERATURE
RECESS
RECESS
TYPE
TYPE
06
MATERIAL
MATERIAL
TYPE
TYPE
Controltac/
Comply
MIN. APPLY
TEMPERATURE
POST HEATING
TEMPERATURE
COLOUR
RANGE
ADHESIVE
TYPE
Shallow
Gentle
COLOUR
COLOUR
RANGE
RANGE
ADHESIVE
ADHESIVE
RECESS
TYPE
TYPE
TYPE
FILM
FILM
THICKNESS
THICKNESS
DURABILITY
DURABILITY
MATERIAL
TYPE
RECESS
RECESS
TYPE
TYPE
FILM
THICKNESS
DURABILITY
RECESS
TYPE
films for DIGITAL PRINT
Scotchcal IJ170 Series
A value cast 50 micron film with a pigmented grey adhesive for
excellent hiding power. For digital print applications on to flat or
moderately curved surfaces for car wraps and single step, shallow
recessed van wraps.
Featuring Comply v3 adhesive with non-visible air channels to offer
the ultimate air release technology for fast and bubble free application.
IJ170Cv3 features a low tack adhesive for easy repositionable
application.
Key Features:
• For flat or moderately curved surfaces
•Comply v3 air release adhesive for bubble free application
• Excellent hiding power and opacity
Code/Colour:
IJ170-10Cv3 Gloss White Comply
Recommended Overlaminate:
8518 8580M
8580
10ºC
100ºC
MIN.
MIN.APPLY
APPLY
POST
POSTHEATING
HEATING
TEMPERATURE
TEMPERATURE TEMPERATURE
TEMPERATURE
RECESS
RECESS
TYPE
TYPE
MATERIAL
MATERIAL
TYPE
TYPE
Comply
MIN. APPLY
TEMPERATURE
POST HEATING
TEMPERATURE
COLOUR
RANGE
ADHESIVE
TYPE
Shallow
Gentle
COLOUR
COLOUR
RANGE
RANGE
ADHESIVE
ADHESIVE
RECESS
TYPE
TYPE
TYPE
FILM
FILM
THICKNESS
THICKNESS
DURABILITY
DURABILITY
MATERIAL
TYPE
FILM
THICKNESS
DURABILITY
Application Temperature (Celsius)
+4°C minimum
Film Type
Cast
Max. Durability
8 years
Surface Type
Flat, Simple Curves, Corrugations,
Rivets
Adhesive Type
Comply v3 Air Release
Adhesive Colour
Grey
Removability
Permanent
Surface Finish
Gloss
Thickness (film)
50 µm
RECESS
TYPE
RECESS
RECESS
TYPE
TYPE
07
FILMS FOR DIGITAL PRINT
DPF 6000 Series
Films for colour change and special effects
A premium cast 50 micron gloss white digital film with tinted,
permanent pressure-sensitive adhesive for excellent hiding power.
X-Scape air release adhesive optional. For vehicle wrap applications on
flat or moderately curved surfaces.
The low tack repositionable adhesive system is designed to provide
excellent opacity, as well as easy installation. The film provides superior
conformability around rivets, curves, and contours. The X-Scape air
channel version speeds up application, while maintaining high enough
tack to ensure a long term bond.
Key Features:
• For flat or moderately curved surfaces
• Repositionable and X-Scape adhesive for even faster application
Application Temperature (Celsius)
+4°C minimum
Film Type
Cast
Max. Durability
7 years
Surface Type
Flat, Rivets, Curves, Contours,
Channels
Adhesive Type
Repositionable, Air Release (optional)
Adhesive Colour
Grey
Removability
Permanent
Surface Finish
Gloss
Thickness (film)
50 µm
• Excellent hiding power and opacity
Code/Colour:
DPF 6000RP Gloss White
DPF 6000RP Gloss Clear
DPF 6000XRP Gloss White X-Scape
Recommended Overlaminate:
3220G 3210G
3220M
4ºC
100ºC
MIN.
MIN.APPLY
APPLY
POST
POSTHEATING
HEATING
TEMPERATURE
TEMPERATURE TEMPERATURE
TEMPERATURE
RECESS
RECESS
TYPE
TYPE
08
MATERIAL
MATERIAL
TYPE
TYPE
Repositionable
/ Xscape
MIN. APPLY
TEMPERATURE
POST HEATING
TEMPERATURE
COLOUR
RANGE
ADHESIVE
TYPE
Shallow
Gentle
COLOUR
COLOUR
RANGE
RANGE
ADHESIVE
ADHESIVE
RECESS
TYPE
TYPE
TYPE
FILM
FILM
THICKNESS
THICKNESS
DURABILITY
DURABILITY
MATERIAL
TYPE
RECESS
RECESS
TYPE
TYPE
FILM
THICKNESS
DURABILITY
RECESS
TYPE
films for DIGITAL PRINT
MPI 1000 Series
An ultra-premium cast film, suitable for vehicle wraps. Avery MPI 1105
Supercast offers outstanding conformability on the most demanding 3D
applications. Available with Easy Apply RS technology for maximum air
egress, slideability and repositionability, plus long-term removability.
MPI 1104 Series provides superior 3D performance for rivets and
corrugations. Also with repositionability and air egress technology to
eliminate bubbles. Both films have an excellent print performance across
all printing platforms.
Key Features:
• Ultimate conformability for 3D applications
Application Temperature (Celsius)
+7-10°C minimum
Film Type
Cast
• Repositionability and slideability - will not stick until pressure is applied
Max. Durability
10 years
Code/Colour:
Surface Type
Flat, Simple Curves, Corrugations,
Rivets
Adhesive Type
Pressure-sensitive, Repositionable
(optional) and Air Release (optional)
Adhesive Colour
Grey
Removability
Permanent
Surface Finish
Gloss
Thickness (film)
50 µm
• Easy Apply features allow outflow of air
• Excellent printability on all platforms
MPI 1105 SC Gloss White
MPI 1105 SC EA RS Gloss White Easy Apply, Repositionable Slideable
MPI 1906 AP Gloss White Apolar
MPI 1104 Gloss White Repositionable
MPI 1104 EA Gloss White Repositionable Easy Apply
MIN. APPLY
EMPERATURE
Recommended Overlaminate:
DOL 1460 Gloss
DOL 1000 Gloss
POSTDOL
HEATING
COLOUR
ADHESIVE
1480
Matt
DOL
1100 Matt
TEMPERATURE
RANGE
TYPE
+7-10ºC
RECESS
TYPE
70ºC
MIN.
MIN.APPLY
APPLY
POST
POST
HEATING
HEATING
MATERIAL
FILM
TEMPERATURE
TEMPERATURE
TEMPERATURE
TEMPERATURE
TYPE
THICKNESS
RECESS
RECESS
TYPE
TYPE
MATERIAL
MATERIAL
TYPE
TYPE
Repositionable
/ Easy Apply
Deep /
U Shape
COLOUR
COLOUR
DURABILITY
RANGE
RANGE
ADHESIVE
ADHESIVE
RECESS
TYPE
TYPE
TYPE
FILM
FILM
THICKNESS
THICKNESS
DURABILITY
DURABILITY
RECESS
RECESS
TYPE
TYPE
09
application
application for single step recess
Application Guide for 3M 1080 Series, 3M IJ180Cv3 Series and 3M IJ170Cv3
Series films into shallow recesses.
Step 1
Step 2
For application of film into single step shallow recesses the vinyl
should be bridged as normal, leaving a minimum of 200mm of
film bridged, this may increase depending on depth of recess.
Apply to the flat panels first.
Heat the vinyl to soften and re-tension the film over the bridged
area, ensuring heat is then concentrated to the vinyl opposite
the recess (this ensures the stretch comes from this area not the
recessed area).
LESS
HEAT
Min 200mm
MEDIUM
HEAT
MOST
HEAT
Step 3
Step 4
Vinyl is to be applied to the deepest part first with stretch coming
from the flat, non-recessed area. Any trapped air on flat areas can
be worked out progressively with the aid of air release technology.
Postheat any areas that have been heated and stretched in the
recess after application of each panel.
VINYL APPLIED
TO DEEPEST AREA OF
PART
STRETCH
CHANNEL
ROLLER
10
application
application for deep u shape recess
Application Guide for 3M 1380 Series, 3M IJ380 Series and 3M Envision 480
Series films into deep recesses.
Step 1
Step 2
Bridge the film over the deep recess or corrugation, then apply
the film to the flat panels first.
Apply the film in the recess in the deepest point first (A) using
heat in the opposite corner (B) Continue the application at the
opposite point of the recess (B).
B
A
Step 3
Step 4
Apply the film to the middle part of the recess (C).
Heat the film to a minimum of 100°C and use a channel roller to
apply uniform pressure within the recess. Postheat any areas that
have been heated and stretched in the recess after application of
each panel.
CHANNEL
ROLLER
C
11
HINTS & TIPS
outgass
How should I outgass?
Outgassing is the process of removing solvents
from the printed graphic. Prior to lamination, prints
should be left at 23°C, for a minimum of 48 Hours.
Images with dense colours may need more time.
There should be a constant flow of air over the
graphics to ensure the solvent is moved away from
the face. As solvent is heavier than air, it will not
move unless aided from airflow.
Why should I outgass?
Solvents still within the prints will cause the film
to feel tacky when applying. Solvents soften the
adhesive, removing any adhesive benefits. Once the
post heat
How should I post heat?
Post heating must be done after each panel is
completed using a digital thermometer for accurate
temperatures. Always remove the heat gun from
the area you’re measuring, heat and measure
every 3-4 inches referring to product bulletins for
recommended temperatures. Use a small channel
roller in the recesses.
Why Should I Post Heat?
Post heating speeds up the process of adhesive flow
and helps reach maximum adhesive bond over a
short amount of time. Post heating removes the
film memory. If you do not post heat correctly this
will cause the film to pop from a recess.
12
graphic is applied, the solvent continues to soften
and weaken the adhesive. Beware on panel edges
and recesses, where the adhesive is weakened and no
longer able to adhere, causing the film to ‘pop’ from
the recess.
HINTS & TIPS
Caring for Your Vehicle Graphics
Care for your vehicle graphics like you would any fine paint finish.
Using high quality products designed specifically for car care and
these cleaning and maintenance procedures will help keep your
vehicle graphics looking their best.
1. Wash regularly
•Wash whenever the car appears dirty. Contaminants allowed to
remain on the graphic may be more difficult to remove during
cleaning.
• Rinse off as much dirt and grit as possible with water.
•Use a wet, non-abrasive detergent such as VION Car Care
Cleaner and a soft, clean cloth or sponge.
4. Difficult contaminants
•Soften difficult contaminants such as bug splatter, bird
droppings, tree sap and similar contaminants by soaking them
for several minutes with very hot, soapy water as early as
possible. Rinse thoroughly and dry.
•If further cleaning is needed, test one of these products in an
inconspicuous area to ensure no damage to the graphics. Spot
clean the contaminants.
•Do not use rough scrubbing or abrasive tools, which will scratch
the film. Wash and rinse off all residue immediately.
5. Fuel spills
•Rinse thoroughly with clean water. To reduce water spotting,
immediately use a silicone squeegee to remove water and
finish with a clean microfibre cloth.
•Wipe off immediately to avoid degrading the vinyl and
adhesive. Then wash, rinse and dry as soon as possible.
2. Automated car washes
•Most standard graphic films and overlaminates can be polished
or waxed with a high quality car wax.
•Brush-type car washes are not recommended as they can
abrade the film and cause edges to lift or chip, as well as dulling
the film’s appearance. Brushless car washes are acceptable.
3. Pressure washing
•Although hand washing is the preferred cleaning method,
pressure washing may be used, providing these conditions are
strictly followed:
• Ensure the water pressure is kept below 2000 psi (14 MPa).
• Keep water temperature below 80°C (180°F).
• Use a spray nozzle with a 40 degree wide angle spray pattern.
•Keep the nozzle at least 300 mm (1 foot) away from and
perpendicular (at 90 degrees) to the graphic.
•Beware holding the nozzle of a pressure washer at an angle to
the graphic may lift the edges of the film.
6. Polish and wax
•Before use, test and approve in an inconspicuous area. Do not
use any abrasive polishes or cutting compounds.
•3M do not recommend any polishing or wax product for the
matt or textured films.
7. Store indoors or under cover whenever possible
•Vinyl graphics (just like paint) are degraded by prolonged
exposure to sun and atmospheric pollutants, particularly on the
horizontal surfaces such as bonnet, boot lid and roof.
•Whenever possible, store in a garage or at least in a shaded
area during the day. At night protect the car from dew or rain,
which may contain acidic pollutants (a common problem in
many large metropolitan areas).
•When a garage is not available, consider using a cloth car cover
at night. If your graphics start to discolour or turn brown (which
is caused by acidic pollution), immediately remove the graphics
from the vehicle to avoid staining the underlying paint.
13
films for colour change
Wrap Film 1080 Series
A 90 micron premium cast film for car wraps in a choice of gloss, matt,
metallic, satin, brushed metal and carbon fibre effects. The dual layer
films are designed for solid colour vehicle detailing, decoration and full
wraps and provide excellent opacity to hide high-contrast surfaces.
Combining Controltac and Comply v3 adhesive features for ultimate
repositionability and air release. Controltac technology allows you
to slide and reposition the graphic before activating the adhesive for
perfect results, whilst the Comply non-visible air channels enable fast
and bubble free application.
Key Features:
•Large colour range, gloss, matt, metallic, satin, brushed and
carbon fibre
• Controltac repositionable and Comply v3 air release adhesive
• For flat or moderately curved surfaces
• Wider roll width of 1524mm for wrapping any section without joins
MIN. APPLY
TEMPERATURE
18-22ºC
Carbon
Brushed
Matt
Gloss
60ºC
100ºC
MIN.
MIN.APPLY
APPLY
POST
POSTHEATING
HEATING
TEMPERATURE
TEMPERATURE TEMPERATURE
TEMPERATURE
RECESS
RECESS
TYPE
TYPE
14
MATERIAL
MATERIAL
TYPE
TYPE
Controltac
/ Comply
COLOUR
COLOUR
RANGE
RANGE
FILM
FILM
THICKNESS
THICKNESS
POST HEATING
TEMPERATURE
COLOUR
RANGE
Shallow
Gentle
ADHESIVE
ADHESIVE
RECESS
TYPE
TYPE
TYPE
DURABILITY
DURABILITY
MATERIAL
TYPE
RECESS
RECESS
TYPE
TYPE
FILM
THICKNESS
ADHESIVE
TYPE
Application Temperature (Celsius)
+16°C minimum
Film Type
Cast
Max. Durability
6 years
Surface Type
Flat, Simple Curves
Adhesive Type
Controltac Pressure-activated and
Comply v3 Air Release
Adhesive Colour
Grey
Removability
Permanent
Surface Finish
Gloss, Matt, Satin, Metallic, Brushed
Metal, Carbon Fibre
Thickness (film)
90 µm
DURABILITY
RECESS
TYPE
films for colour change
Wrap Film 1080 Series
1080-BR120
Brushed Aluminium
1080-G103
Hot Pink
1080-M103
Matt Pink
1080-S336
Satin Sheer Luck Green
1080-BR201
Brushed Steel
1080-G120
White Aluminium
1080-M196
Matt Apple Green
1080-G336
Gloss Green Envy
1080-BR212
Brushed Black Metallic
1080-G201
Anthracite
1080-M203
Matt Red Metallic
1080-G356
Gloss Atomic Teal
1080-BR217
Brushed Steel Blue
1080-G203
Red Metallic
1080-206
Matt Pine Green Metallic
1080-G364
Gloss Fiery Orange
1080-BR230
Brushed Titanium
1080-G211
Charcoal Metallic
1080-M209
Matt Brown Metallic
1080-S344
Satin Canyon Copper
1080-BR241
Brushed Gold
1080-G212
Black Metallic
1080-M211
Matt Charcoal Metallic
1080-G344
Gloss Liquid Copper
1080-CF10
Carbon Fibre White
1080-G217
Blue Steel Metallic
1080-M227
Matt Blue Metallic
1080-G363
Gloss Dragon Fire Red
1080-CF201
Carbon Fibre Anthracite
1080-G227
Blue Metallic
1080-M229
Matt Copper Metallic
1080-G323
Gloss Raspberry Fizz
1080-SF12
Straight Fibre Black
1080-G241
Gold Metallic
1080-M230
Matt Grey Aluminium
1080-G348
Gloss Fierce Fuchsia
1080-G10
Gloss White
1080-G251
Sterling Silver
1080-M261
Matt Dark Grey
1080-GP99
Gloss Pearl Black Rose
1080-G12
Gloss Black
1080-M10
Matt White
1080-S10
Satin White
1080-G335
Gloss Lemon Sting
1080-G13
Hotrod Red
1080-M12
Matt Black
1080-S12
Satin Black
1080-S335
Satin Bitter Yellow
1080-G14
Burnt Orange
1080-M13
Matt Hotrod Red
1080-S120
Satin White Aluminium
1080-GP282
Gloss Pearl Ember Black
1080-G15
Bright Yellow
1080-M15
Matt Bright Yellow
1080-SP10
Satin Pearl White
1080-GP272
Gloss Pearl Midnight Blue
1080-G25
Sunflower
1080-M21
Matt Silver
1080-S347
Satin Perfect Blue
1080-S261
Satin Dark Grey
1080-G46
Kelly Green
1080-M22
Matt Deep Black
1080-S327
Satin Ocean Shimmer
1080-G127
Gloss Boat Blue
1080-G47
Intense Blue
1080-M26
Matt Military Green
1080-G327
Gloss Atlantis Blue
1080-S363Satin
Smoldering Red
1080-G54
Bright Orange
1080-M27
Matt Dark Navy
1080-G378
Gloss Blue Raspberry
1080-S196
Satin Apple Green
1080-G77
Sky Blue
1080-M38
Matt Royal Purple
1080-S378
Satin Mystique Blue
1080-M67
Matt Riviera Blue
1080-G79
Light Ivory
1080-M54
Matt Orange
1080-G377
Gloss Cosmic Blue
1080-S51
Satin Battleship Grey
1080-G83
Dark Red
15
films for colour change
Wrap Film 1380 Series
New 3D conformable coloured film for vehicle wraps with optimized
initial low tack adhesive for even easier and efficient application. For
application on to the most severe recessed areas of a vehicle, without
the need for cutting.
Combining Controltac and Comply adhesive features for ultimate
repositionability and air release. Controltac technology allows you
to slide and reposition the graphic before activating the adhesive for
perfect results, whilst the Comply non-visible air channels enable fast
and bubble free application with a smooth surface appearance on the
vehicle.
Key Features:
Application Temperature (Celsius)
+16°C minimum
• Range of gloss, matt, metallic and satin colours
Film Type
Cast
Max. Durability
6 years
Surface Type
Flat, Simple Curves, Compound
Curves, Corrugations, Rivets
Adhesive Type
Controltac Pressure-activated and
Comply Air Release
Adhesive Colour
Grey
Removability
Permanent
Surface Finish
Gloss, Matt, Satin, Metallic
Thickness (film)
90 µm
• Special low tack Controltac adhesive for even easier repositioning
• Micro Comply air release adhesive for uniform appearance
• Conformable on the most difficult recessed areas
MIN. APPLY
EMPERATURE
POST HEATING
TEMPERATURE
20ºC
RECESS
TYPE
COLOUR
RANGE
85-100ºC
ADHESIVE
TYPE
Controltac
/ Comply
MIN.
MIN.APPLY
APPLY
POST
POST
HEATING
HEATING DURABILITY
COLOUR
COLOUR
MATERIAL
FILM
TEMPERATURE
TEMPERATURE
TEMPERATURE
TEMPERATURE
RANGE
RANGE
TYPE
THICKNESS
RECESS
RECESS
TYPE
TYPE
16
1380-M10
MATERIAL
MATERIAL
Matt
White
Deep /
U Shape
ADHESIVE
ADHESIVE
RECESS
TYPE
TYPE
TYPE
1380-G13
RECESS
RECESS
Gloss
Hotrod Red
TYPE
TYPE
1380-G281
Gloss Mineral Grey Metallic
1380-G12
Gloss Black
1380-G10
Gloss White
1380-M287
Matt Slate Blue Metallic
1380-M291
Matt Granite Metallic
1380-G212
Gloss Black Metallic
1380-G45 Gloss Royal Yellow
1380-M126 Matt Army Green
1380-M12
Matt Black
1380-S284
Satin Autumn Orange Metallic
1380-M230
Matt Grey Aluminium
1380-S12
Satin Black
TYPE
TYPE
FILM
FILM
THICKNESS
THICKNESS
DURABILITY
DURABILITY
films for colour change
Ultimate PremiumPlus
A 100 micron flexible cast film for car wrapping in a choice of gloss,
matt and metallic colours. The extra formable multi-layer colour film
features a premium clear protective film for conformability and easy
application.
Combining Arlon’s new advanced repositionable adhesive with
X-Scape. The low initial tack adhesive enables repositioning during
application, whilst the X-Scape air channel technology allows fast
bubble free application.
Key Features:
• Large colour range gloss, matt, metallic and satin colours
Application Temperature (Celsius)
+18°C minimum
Film Type
Cast
Max. Durability
6 years
Surface Type
Flat, Simple Curves, Smooth Convex,
Concave Curves
Adhesive Type
Repositionable X-Scape Air-release
Adhesive Colour
Grey
Removability
Removable with heat
Surface Finish
Matt, Satin, Metallic
RECESS
ThicknessTYPE
(film)
100 µm
• Repositionable and X-Scape air release adhesive
• For smooth convex or concave surfaces
• Wider roll width of 1524mm for wrapping any section without joins
• Choice of textured carbon fibre and brushed metal colours
• High gloss candy colours also available
MIN. APPLY
TEMPERATURE
18ºC
100ºC
MIN.
MIN.APPLY
APPLY
POST
POSTHEATING
HEATING
TEMPERATURE
TEMPERATURE TEMPERATURE
TEMPERATURE
RECESS
RECESS
TYPE
TYPE
RP Xscape
COLOUR
COLOUR
RANGE
RANGE
CWC-630
911MATERIAL
Riviera Blue Matt
MATERIAL
FILM
FILM
TYPE
TYPE
THICKNESS
THICKNESS
POST HEATING
TEMPERATURE
COLOUR
RANGE
Shallow
Gentle
ADHESIVE
ADHESIVE
RECESS
TYPE
TYPE
TYPE
MATERIAL
TYPE
FILM
THICKNESS
CWC-625
Grey
RECESS
RECESS
DURABILITY
DURABILITY Combat
ADHESIVE
TYPE
DURABILITY
CWC-614
Matt Steel Blue
CWC-645
Sunkiss Aluminium
TYPE
TYPE
CWC-633
Cyber Grape
CWC-624
Combat Green
CWC-620
Matt Frozen Grey
CWC-646
Hot Pink Aluminium
CWC-642
Heat Wave
CWC-629
F1 Racing Red
CWC-615
Matt Aluminium
CWC-643
Green Aluminium
CWC-634
Mariana Blue
CWC-628
Manga Pink
CWC-622
Matt Light Blue
CWC-644
Yellow Aluminium
CWC-632
Tundra
CWC-627
Fierce Orange
CWC-623
Deep Ocean
CWC-501
Satin Pearl White
CWC-631
Blue Aluminium
CWC-626
Toxic Green
CWC-621
Chocolate Brown
CWC-500
Satin Black
CWC-601
Matt White
CWC-618
Gunpowder
CWC-619
Red Aluminium
CWC-516
Galaxy Black
CWC-600
Matt Black
CWC-617
Matt Steel
502-CF
Matt White Carbon
519-CF
Red Aluminium Carbon
503-CF
Black Carbon Fibre
604-BR
Brushed Army Gold
507-BR
Brushed Silver
619-BR
Brushed Red Aluminium
603-BR
Brushed Black
Metallic
504-CF
Army Gold Carbon
CWC-600
Matt Black
CWC-825
Hi-Liter Yellow
CWC-851
Tropical Pink
CWC-852
Amethyst
CWC-854
Citrine
CWC-855
Electric Lime
CWC-856
True Blood
CWC-616
Aztec Bronze
CWC-515
Starry Night
17
films for colour change
PerformancePlus 4600LX
A competitively priced cast vehicle wrap film in the most popular gloss,
matt and metallic colours. The single layer high performance film is
ultra-conformable.
Designed for full vehicle wraps, vehicle striping, and custom accent
wraps on vehicles. Combining Arlon’s new advanced repositionable
adhesive with X-Scape. The low initial tack adhesive enables
repositioning during application, whilst the X-Scape air channel
technology allows fast bubble free application.
Key Features:
• Popular colour range in gloss, matt and metallic
Application Temperature (Celsius)
+18°C minimum
Film Type
Cast
Max. Durability
5 years
Surface Type
Flat, Simple Curves, Smooth Convex,
Concave Curves
Adhesive Type
Repositionable X-Scape Air-release
Adhesive Colour
Grey
RECESS
TYPE
Removability
Removable with heat
Surface Finish
Gloss, Matt
Thickness (film)
80 µm
• Single layer high performance film
• Repositionable and X-Scape air release adhesive
• For smooth convex or concave surfaces
MIN. APPLY
TEMPERATURE
18ºC
100ºC
MIN.
MIN.APPLY
APPLY
POST
POSTHEATING
HEATING
TEMPERATURE
TEMPERATURE TEMPERATURE
TEMPERATURE
RP Xscape
COLOUR
COLOUR
RANGE
RANGE
4600-305
BlueMATERIAL
MATERIAL
TYPE
TYPE
ADHESIVE
TYPE
ADHESIVE
ADHESIVE
RECESS
TYPE
TYPE
TYPE
MATERIAL
TYPE
FILM
THICKNESS
DURABILITY
4600-102
Gloss White
FILM
FILM
THICKNESS
THICKNESS
DURABILITY
DURABILITY
4600-321
Red
RECESS
RECESS
Bright
TYPE
TYPE
4600-324
Dark Green
4600-149
Matt White
4600-140
Matt Black
4600-367
Bright Yellow
4600-311
Dark Blue
4600-430
Matt Midnight Blue Metallic
4600-330
Gloss Midnight Blue Metallic
4600-103
Gloss Black
4600-423
Matt Graphite Grey Metallic
18
COLOUR
RANGE
Shallow
Gentle
4600-383
Bright Orange
RECESS
RECESS
TYPE
TYPE
POST HEATING
TEMPERATURE
films for colour change
Total Wrap
A competitively priced hybrid vehicle wrap film in a wide range of
gloss, matt and speciality colours. Ideal for applications on cars or flat
panel vans with simple curves and gentle contours. Combining special
PVC compounds together with high quality pigments, iSee2 can offer a
film with incredible dimensional stability and long term durability.
Available in gloss, matt, textured, metallic and pearlescent colours.
Now with a new improved adhesive featuring ACT air channel
technology, to make applications easier than ever.
Key Features:
• Wide colour range in gloss, matt and speciality series
Application Temperature (Celsius)
+10°C minimum
Film Type
Hybrid
Max. Durability
5-7 years
Surface Type
Flat, Simple Curves
Adhesive Type
Pressure Sensitive Air-release
Adhesive Colour
Grey
RECESS
TYPE
Removability
Permanent
Surface Finish
Gloss, Matt, Metallic
Thickness (film)
100 µm
• Hybrid coloured films for cost effective vehicle wraps
• For flat or simple curved surfaces
• Wider roll width of 1524mm for wrapping
any POST
section
without
joins
MIN. APPLY
HEATING
COLOUR
TEMPERATURE
10ºC
100ºC
MIN.
MIN.APPLY
APPLY
POST
POSTHEATING
HEATING
TEMPERATURE
TEMPERATURE TEMPERATURE
TEMPERATURE
RECESS
RECESS
TYPE
TYPE
MATERIAL
MATERIAL
TYPE
TYPE
ACT
Shallow
Gentle
COLOUR
COLOUR
RANGE
RANGE
ADHESIVE
ADHESIVE
RECESS
TYPE
TYPE
TYPE
FILM
FILM
THICKNESS
THICKNESS
DURABILITY
DURABILITY
TEMPERATURE
MATERIAL
TYPE
RANGE
FILM
THICKNESS
ADHESIVE
TYPE
DURABILITY
RECESS
RECESS
TYPE
TYPE
70.100 ACT
Brilliant White
70.601 ACT
Cobalt Blue
71.500 ACT
Strawberry Red
10.201
Ultra Black
70.101 ACT
Ivory White
70.602 ACT
Ocean Blue
71.701 ACT
Acid Green
15.180 ACT
Pearlescent Gold
70.102 ACT
Calcite White
70.700 ACT
Hunter Green
71.801 ACT
Autumn Gold
50.910 ACT
Carbon Fibre White
70.200 ACT
Super Black
70.701 ACT
Bottle Green
71.900 ACT
Shark Grey
50.920 ACT
Carbon Fibre Black
70.103 ACT
Latte Beige
70.702 ACT
Apple Green
71.901 ACT
Satellite Silver
50.950 ACT
Carbon Fibre Red
70.300 ACT
Buttercup Yellow
71.100 ACT
Snowflake White
71.902 ACT
Anthracite Grey
50.960 ACT
Carbon Fibre Blue
70.400 ACT
Mandarin Orange
71.200 ACT
Flat Black
71.903 ACT
Storm Grey
50.980 ACT
Carbon Fibre Gold
70.500 ACT
Chilli Red
70.501 ACT
Volcano Red
12.200 ACT
Metallic Havana Black
50.990 ACT
Carbon Fibre Silver
70.600 ACT
Midnight Blue
71.400 ACT
Sunset Orange
12.400 ACT
Metallic Orange Fizz
19
films for protection
VentureShield Surface Protection Film
An optically clear coated urethane film that protects automotive
paint finishes against stonechips and minor abrasions. Cover bumpers,
headlights, wings, wingmirrors and bonnet edges on cars and bikes.
Warranted against yellowing or cracking.
3M VentureShield protects the most vulnerable surfaces on your vehicle
from damage caused by stone chips, environmental elements, bugs,
scratches and minor abrasions. It can help to maintain the residual value
of your vehicle to virtually eliminate stone chips, scratches and paint
damage.
Key Features:
Application Temperature (Celsius)
+15°C minimum
Film Type
Clear Coated Urethane
• Warranted against yellowing or cracking
Max. Durability
5 years
•Easily applied to bumpers, headlights, wings, wingmirrors and
bonnet edges
Surface Type
Flat, Simple Curves, Smooth Convex,
Concave Curves
Adhesive Type
Pressure Sensitive
Adhesive Colour
Clear
Removability
Permanent
Surface Finish
Gloss
Thickness (film)
165 µm
• Optically clear protection film
• Available in kit format for most vehicle types
24
Automotive Window Tint Films
Metallic Shade Series
Black Shade Series
3M Black Shade window tint range is a low cost non-metalised, dyed
polyester range. The films won’t interfere with mobile phone, GPS
or satellite radio reception. They also block almost all UVA and UVB
rays, which cause fading and skin damage.
3M Metallic Shade window tint range is a low cost metalised, dyed
polyester range. The hybrid technology provides maximum heat
rejection. The films block almost all UVA and UVB rays, which cause
fading and skin damage. With a scratch resistant coating, the films
have several different shading levels in an attractive charcoal hue.
Key Features:
Code:
Key Features:
Code:
•Choice of charcoal shading levels
BS 5
BS 15
BS 30
BS 45
•Low cost dyed and metalised heat gain
reduction technology
MS 5
MS 25
MS 35
MS 55
•Low cost dyed heat gain reduction
technology
•Protection from the sun’s heat and glare
•Protect vehicle occupants from
uncomfortable heat and glare
• Sun Protection Factor of 100
• Sun Protection Factor of 100
•Reduce reliance on air conditioning
Colour Stable Series
Crystalline Series
3M Colour Stable window tint films maintain their colour and will
not fade to purple over time. Manufactured with carbon pigments to
give the most natural darkest looking finish of all films.
Key Features:
Code:
• Choice of privacy levels and colours
CS 5
CS 20
CS 35
CS 50
•Rejects heat and UV to reduce glare and
allow you to remain cool and comfortable
• Guaranteed not to bubble or blister
•Scratch resistant coating aids long lasting
durability
Virtually clear films that can reject more heat than darker films,
using patented multilayer metal free nano-technology. They provide
a high performance combination of high visible light transmission,
low visible light reflectivity, with exceptionally high heat gain
reduction capabilities.
Key Features:
Code:
• Virtually clear film
CR 40
CR 70
CR 90
• Multi-layer metal free nano-technology
• Rejects more heat than darker films
• No communications or network interference
Scotchshield Automotive Security Series
Combining sun control technology in a 100 micron safety film.
This hybrid helps shield occupants and valuables by rejecting
heat from the sun, increasing privacy, and holding shattered glass
together. Provides a powerful deterrent to smash and grab theft.
Key Features:
Code:
• Glass shatter and impact protection
SAS 5
SAS 20
SAS 35
SAS 50
SAS Clear
•Protect vehicle occupants from
uncomfortable heat and glare
• Sun Protection Factor of over 100
• Reduce reliance on air conditioning
25
tools and accessories
tools for the trade
Post-heating
Cleaning
ll areas that are
A
stretched into a
concave area must be
post heated
• 3M Surface Preparation Cleaner for 3M films
• VION Surface Cleaner for Arlon films
•Alcohol based cleaners e.g. isopropyl alcohol
or methylated spirit must not be used
Right Tools
Cutting/Trimming
•Digital infrared thermometer
• Knifeless tapes
• Small application roller
• Olfa 30° knives
•Replace scalpel blades
frequently
Wrapping Environment
26
• Clean
• Temperature controlled
• Power
• Good light
www.vehiclewrapfilms.co.uk
www.williamsmith.co.uk
01833 690305
[email protected]
@William_Smiths
/WilliamSmith1832
27
the sign company’s company
materials supply | signs & display | hardware
www.williamsmith.co.uk
www.vehiclewrapfilms.co.uk
WS Printed UK | 0416 |
01833 690305
@William_Smiths
/WilliamSmith1832 [email protected]