Current Instructions 20090527:Layout 1.qxd
Transcription
Current Instructions 20090527:Layout 1.qxd
Product: JPA-MB Page: 1/1 Matt Burkett Offset Mini Red Dot Mount Parts Included: • Mounting plate • Rail body • Clamp Piece • Two (2) guard wings • Six (6) 6-32 x 3/8” button head cap screws (four screws to attach guard wings, two screws to attach sight) • Two (2) 6-32 x 1/2” flat head cap screws (to attach mounting plate to rail body) • Two (2) 10-32 x 5/8” button head cap screws (to attach clamp piece to rail body) The Matt Burkett Mini Red Dot mount will accommodate the JPoint sight, Doctor Optic mini sight or any sights sharing those footprints (see below). The reversible mounting plate of the unit is coded JP or DR to indicate which footprint is accommodated on that side. The mounting plate is also reversible to provide on-bore axis mounting on an M15/M16 platform for right-handed or left-handed operators. Note that the kit includes removable guard wings to protect the sight from impact. We strongly recommend using these to ensure the survivability of any mini red dot sight used under rugged conditions. When using a sight with an on/off switch on the left side, there will be minimal clearance between the guard and the switch protrusion. Because of this, first install the sight on the appropriate base side without the guard wings. Then, attach the wings once the sight is in place. Sights useable with the Matt Burkett Mini Red Dot Mount JP Side DR Side JPoint Trijicon RedDot Tasco Optima Firepoint Doctor Burris Fowler/Pride sight www.mattburkett.com Contact: [email protected] Rev. 09.09