When you start the installation, 3 windows will open

Transcription

When you start the installation, 3 windows will open
When you start the installation, 3 windows will open, one takes you to Microsoft’s
web site so you can download and install Direct X 9.0a or b, (version will change), another
window says your downloading wmfdist.exe from www.fxuser.com (Windows Media 9
Components) and the last window prompts you to *****IMPORTANT – READ THIS*******
Warning giving you a second chance to make sure you have installed Direct X 9.0(a or b is
fine) and have installed Windows Media 9 Components (WM Components).
Welcome window is the second screen that you will see, telling you to close all programs,
and tells you about Copyrights. Clicking on the “Next” button to continue with the
installation.
Welcome window is the second screen that you will see. This window will bring up
the license agreement. Read all the information carefully and make certain you fully
understand it and agree to the terms before Clicking on the “Next” button to continuing
with the installation.
The window that follows asks where you would like to install the files of the
program. We suggest leaving the default, “C:\Program Files\Visiosonic\PCDJ FX”
Click “Next” to continue.
The following window asks where you would like to have the icons stored in your
Program Manager’s menu. We have selected “PCDJ Software”. This is the best choice
and we recommend leaving this default. Click on “Next” to continue.
The next window that appears is a confirmation that the program is ready for
installation. Click on “Next” to proceed
After the installation is completed, the final window gives notice that the program
has successfully installed.
NOTE: The program will also add a shortcut icon to your desktop at this time. (This is so
you can simply click on the icon to start up the PCDJ Software program.
Click on “Finish” to close the installation program and Restart your computer.
STARTING PCDJ SOFTWARE FOR THE FIRST TIME
To run PCDJ Software you will have to Unlock the PCDJ Software. This can be done by
clicking on the PCDJ FX VRM icon on your Desktop and following instructions below.
A small window containing an MID (Machine ID) Code and a SITE Code
will appear…leave this open.
Click on the Register FX VRM Icon on your Desktop…
This will take you to an online registration page. (If this computer does not
have internet, call our Support-Line at 727-799-3828. Enter your
registration information, the CD serial number shipped in your PCDJ box
or emailed to you (PCDJFX-XXXXXX-XXXXXX) and copy and paste the
MID and SITE Code into this web page.
ALL Serial numbers License codes, Activation codes are CaSe
SeNsITiVe
Valid Email address
PCDJFX-000000-000000
You will be emailed your PCDJ FX INIT Code.
Enter this INIT Code in the same small window the MID and Site Code
Appeared and click Continue (INIT CODE IS CASE SENSITIVE) This will
Launch PCDJ FX VRM.
NOTE: If for some reason PCDJ Software fails to start, it is possible there may be an
incompatibility with the sound card(s) you are using or sound card(s) are not installed or
not connected properly, or you may have not installed DirextX or WM Component.
Enter INIT Code HERE
Click Continue to enter
Application
***NOTE*** Keep This INIT Code. Although you won’t need
to enter this Code again, if you wish to transfer your license
to another computer you will need to start PCDJ FX with
your scroll lock key enabled and use this INIT Code to
Receive a Remove Code which you can use on our website
to Register another computer.