Installation Tips

Comments

Transcription

Installation Tips
Automatic Cover Installations Made Easy
By
Joe Nannetti
Poolsaver Inc
Pre-sites
n
A correct pre-site can make the difference between a good
installation and the nightmare install.
Measuring for track length
Checking diagonals
Installing the tracks
Measuring & cutting tracks
Setting up tracks to be installed
n Drill Cantilever for tracks
n Inserting anchors and screws
n
n
Installing Mechanism
Aligning unit in box
n Leveling unit
n Anchoring unit
n
Electrical Hook-up
Wiring to power supply
n Installing automatic stops
n
Installing The Cover
Rolling out the cover
n Running the ropes
n Installing the leading edge bar,
n wheelless adaptations & magnets
n Trimming the ropes
n Pinning the cover to the roller
n When rolling the cover out you should always start at the
left hand side of the pool (looking at the pool from behind he unit) and
roll the cover out behind the system.
n Untie the ropes and make sure there are no tangles.
n
Installing Lid & Brackets
Mounting lid brackets
n Mounting the lid
n