Topics - Teeco Products, Inc.

Serving the Western US Since 1946
Topics
Oct - Nov - Dec 2015
News, Information and Products for the LP-Gas Equipment Professional
NEW! at
NEW! from
Power Scrub Hand Cleaner
Compact “Back Mount” Regulator
•
Cleans hands without water
•
Contains environmentally friendly
grit to remove tough grime, grease,
tar, oils and more
•
Balanced pH prevents burning of
cuts and scrapes
•
Contains a blend of essential oils
plus lanolin and aloe to leave hands
smooth and comfortable
•
Biodegradeable grit will not clog
drains
Item #
Description
PS15
Power Scrub Hand Cleaner, 15 oz Bottle
PS28
Power Scrub Hand Cleaner, 1 Gallon Pump
See Inside
NEW! at Teeco .................................................... Page 1
Bob’s Corner ...................................................... Page 2
Propane Storefront Signage ............................... Page 3
The LV3403BR Series Back Mount is designed to reduce first stage
pressure of 5-10 PSIG down to burner pressure; normally 11” w.c.
Designed as a second stage regulator for smaller applications with
flow requirements up to 450,000 BTU/hr. Ideal for homes, mobile
homes, and cottages.
Features
•
Built in 1/8” F.NPT pressure taps on both regulator inlet and
outlet side of the regulator. Plugs can be removed with a 3/16”
hex Allen wrench.
•
Large vent helps prevent vent blockage. It is tapped for 3/8”
F.NPT for vent pipe away applications.
•
With 15 PSIG inlet pressure, the regulator is designed to not
pass more than 2 PSIG downstream with the seat disc is removed, per UL 144 specifications.
•
Incorporates an integral relief valve per
UL 144 specifications.
•
Unique bonnet vent profile minimizes vent freeze over.
•
Compact design saves space.
•
Factory Delivery Pressure: 11”
wc @ 10 PSIG Inlet
•
Adjustment Range: 9” to 13” wc
Refurbishing and Exchange Programs ........... Pages 4-5
Gasguard AutoGas Nozzle.................................... Page 5
Water Heater Clearance Sale ............................. Page 6
Item #
Inside Teeco ....................................................... Page 7
What Is This Product?......................................... Page 8
LV3403B44R
LV3403B46R
Inlet
Outlet
Connection Connection
1/2” FNPT
1/2” FNPT
3/4” FNPT
Orifice
Size
Bonnet
Vent
Position
Vapor
Capacity
BTU/hr
1/4”
Over Inlet
450,000
Maximum flow design based on 10 PSIG inlet and 9” wc delivery pressure.
Quality LP Gas Products from a Company You Can Trust
Bob’s Corner
TEECO Topics is published four times yearly by TEECO
Products, Inc. as a service to our customers. 3,000
copies are distributed to customers and selected LPG
industry leaders.
By Bob Bailey
Executive VP of Operations, COO
Teeco Products, Inc.
Executive Vice President & COO
Bob Bailey
Vice President of Administration & CFO
Gary Childress
Well, we are ready to start the 4th quarter
of the year and we probably all have our
fingers crossed hoping for a wet and cold
winter. It has been a busy year so far, so
let’s all hope for a great 4th quarter.
This has been a strange year for me due
to the fact that I started in this industry in
1975 and have suddenly discovered after
40 years, that I might be one of the old
timers. The strange part is I never planned
on being around this long. There is just
something about this business that gets in
your blood.
Now with the title of “Old Timer” comes
some responsibilities. I remember those
“Old Timers” that I have worked with, or
worked for, over the years that took the
time to mentor or teach me about this
business. They understood that it was
their responsibility to train the next generation and pass down their knowledge so
our industry could continue to grow and
have a future.
This is something that everyone at Teeco
takes very seriously. We listed in this
month’s Teeco Topics all our employee’s
years of service and as you can see we
have quite a few “Old Timers.” All of us
this year made a commitment to be more
involved in our local associations and to
offer and provide training. I personally
travelled to Idaho, Oregon, Washington,
and Arizona for pump and meter schools.
Our sales staff provided many tailgate
training sessions and we have donated
our facilities for CETP training.
We have trained in excess of 300 customers and we are not done yet. If you
missed one of our sessions or need training provided to your employee’s please
give this “Old Timer” or your Teeco sales
person a call. Hope you enjoy this quarter’s Teeco Products and Thank You again
for your support.
Bob Bailey
General Manager of Operations & Fabrication
Jay Stephens
Marketing Manager
Mary Clements
Regional Sales Manager, Central/Southern
California, Nevada and Arizona
Dave Cox
Operations Manager, Sacramento, CA
Tom Valverde
Regional Sales Manager, Pacific Northwest/
Northern California
Dave Drimmel
Operations Manager, Auburn, WA
Charles Banks
Regional Sales Manager, Rocky Mountains
Dana Hall
Operations Manager, Rapid City, SD
Dean Travis
Engineering, Construction & Fabrication
Manager
Paul Connelly
TEECO Corporate Headquarters
16881 Armstrong Avenue
Irvine, CA 92606
800-854-3463
or 949-261-6295
FAX 888-854-3463
or 949-474-8663
Sales and Service
TEECO Sacramento, CA Superstore
Inside
Sales, Fabrication, Engineering & Construction
7471 Reese Road
Sacramento, CA 95828
800-225-6621 or 916-688-3535
FAX: 888-225-6621 or 916-689-1219
TEECO Rapid City, SD
Are you signed up to receive Teeco Topics via email?
414 E. Blvd. N.
Rapid City, SD 57701
800-843-8660 or 605-342-2802
FAX 888-843-8660 or 605-342-4942
Your e-mail version will arrive faster than the printed version,
and features full color photos.
Send a note to [email protected] with your email and
the email address of anyone in your company who would like
to receive Teeco Topics.
TEECO Auburn, WA
Please include your mailing address in your request if you’d like to discontinue your
printed version of Teeco Topics.
Thanks for reading!
1601 Pike Street N.W.
Auburn, WA 98001
800-426-9456 or 253-735-0222
FAX 888-426-9456 or 253-735-1008
Website: www.teecoproducts.com
e-mail: [email protected]
To Receive your full color copy of Teeco Topics via email, please send your request to [email protected]
Page 2
Propane Signage
Storefront Feather Flag
This 104” tall flag sign is designed to catch a customer’s attention by
constantly moving. This flag comes standard on a heavy steel base that
can be bolted down to your sidewalk or parking lot, or can be left unbolted so you can bring it in each night. These feather flags move with
the slightest amount of wind, so there is constant motion. They come
standard with a one sided graphic, but the image is translucent so the
image is seen on both sides.
Revolving Propane Tank
DFB
DFBX
This revolving sign makes is a serious attention getter. Bold graphics are
printed on lightweight / ridged corrugated plastic with a clean profile cut.
The result is a clean looking graphic that takes the wind and “revolves”
on the heavy-duty yard spike. (Item #DTGR)
If you don’t have a yard in which to display your Revolver, the X Base
(Item #DTXBT) is perfect for hard flat ground or cement.
Item #
Description
DFB
Blue/White Store Front Flag with Steel Base
DFBX
Blue/White Store Front Cylinder Exchange Flag with Steel Base
DTGR
Blue/White Revolving Tank Sign with Yard Stake
DTXBT
Blue/White Revolving Tank Sign with X-Cross Base
DTGR
(Ground Stake)
DTXBT
(X Base)
WIP… OPPORTUNITY KNOCKS!
WOMEN IN PROPANE COUNCIL
Some of the strongest industry leaders created WIP and connected us across the nation. Our mission is to provide
positive opportunities for all members of our industry to support the advancement and success of women.
MEMBERSHIP BENEFITS
• Hands-on training sessions
• Education seminars
• Networking opportunities
• Mentoring programs
• Professional development
• Opportunities for leadership roles within WIP
Men are also encouraged to become
members & participate in our upcoming
meeting in New Orleans in October 2015.
Sharing expertise strengthens the industry as a whole.
IT’S EASY TO JOIN
Visit www.npga.org/wip. Simply click on either
the Individual Membership link or the Corporate
Membership link and ll out the application form.
$25 Individual Member
$25 Friend of WIP
$500 Corporate Member
www.npga.org/wip
Page 3
Not quite ready to give up on that old piece of equipment...?
Give it new life and reduce waste with one of these great programs!
Dispenser Refurbishing Program
1.
2.
RegO Relief Valve Recertification Program
Teeco inspects the old dispenser
- tests the pump and motor for
functionality; checks the cage for
dents, corrosion and rust; and
makes sure the meter and register
are operational.
Replace relief valves at a lower cost than
buying new ones.
1.
Purchase a new or recertified 3149MG or
A3149MG Relief Valve from Teeco, and install
it in the RegO MultiPort.
We provide a quote based on this
inspection (usually using the price
for a new one less our cost or the
usable equipment from the old
dispenser).
2.
Return the repairable relief valve to Teeco for a
Recertification Allowance.
3.
After the quote is approved, we dismantle the old unit, rebuild, refurbish and re-paint as needed.
4.
After leak testing, the unit goes to the Calibration Rack. At this
time, the unit is either ‘Proved’ and sealed or repaired.
RegO will completely disassemble the relief valve, replace the
springs, seat disc, retainer screw and washer and adjusting
screw. All metal parts will be wire brushed, bright dipped and
cleaned to remove paint, rust and mill scale, and the parts
restored to bright metal condition. RegO will reassemble, retest,
date stamp the valve and provide a remanufactured assembly
meeting all codes under the original construction and carrying
the same warranty as a new relief valve.
Teeco’s Dispenser Refurbishing Services
7471 Reese Road
Sacramento, CA 95828
Call: 800-225-6621 or 916-688-3535
Compressor Core Exchange Program
Smart-Hose Rebuild Program
Exchange Terms/Conditions
Return Your Used Smart-Hose Fittings and Receive a Factory
Rebuilt Smart-Hose System.
1.
Exchange core units must be complete and are subject to inspection
prior to issuance of core credit. Core
units with crank-case damage are
subject to adjustment of core credit.
2.
Exchange core units must be shipped
to Teeco “freight prepaid”.
3.
Exchange core unit crankcase must
be drained of oil. All core units received with oil in the crankcase will
be subject to a waste oil disposal
charge.
1.
Cut Used Smart-Hose and inner cable 4-5 inches behind ferrule.
2.
Call Teeco Products for an RGA #.
3.
Return Used Smart-Hose Fittings (DOT Only) with RGA # and
Purchase Order.
4.
Receive a Factory Rebuilt Smart-Hose at Significant Cost Savings*
Exchange core units must be returned to Teeco within 30
days of shipment of exchange unit to receive full core credit.
5.
Core credits are on a one for one basis. An exchange unit
must be purchased in order to receive core credit.
6.
Prices subject to change without notice.
4.
*Subject to Smart-Hose Technologies analysis and
determination that fittings are usable
For more information on any of these programs, please contact your Teeco Representative.
Page 4
Be Green &
Save Some Green!
Smith Pump Core Exchange
Turn in your old pump for credit on a new
Smith Pump. All exchanges are based on
model for model, on a one-on-one basis.
Valid for the following pump models. Pump
Exchange only. Motor not included.
Pump Exchange Model
• DW-1X
• DW-HX
• ECH-1X
D Series
• EG-1X
• GC-1LX
• MC-1X
• MC-2X
E Series
• MC-3X
• MC-4X
• MC-5X
MC-1, GC-1
• MC-1044X
• MC-1044HX
• TC-2X
• TC-2FX
MC-3
• E-100X
MC-4
• MC-100X
• MC-101X
• MC-102X
• MC-102QX
MC-5
• MC-103X
• MC-104X
• MC-105X
Perfect for AutoGas Applications
The GG20DNS nozzle is suited for refueling of passenger vehicles by untrained personnel. It incorporates a patented Dual Nose piece which significantly reduces the amount
of user error when operating the nozzle. It creates a
positive seal to the customer’s vehicles even if they
have not tightly screwed the nozzle to the fill point.
If the nozzle is not screwed on completely and the
lever is pulled, there is no effect of flow rate as the
Dual Nose piece compensates for the changed operating situation.
•
•
•
•
•
•
•
•
•
Flow rate of 60L/min at 12bar system pressure
Release Volume on valve closure of 1.7cm ³
Dual Nose piece for added customer safety
Customer experiences a lower lever pressure than GG20
Magnet option for dispensers with reed switch technology
New guided extended thread assists with alignment and connection to fill point
A fine filter comes standard in all nozzles
Long Connector Nut to access “hard to reach” fill points
UL Listed
Part #
Description
GG20DNS
Gasguard Nozzle - for refueling of passenger vehicles
Humphrey Gaslights
Mounts permanently and operates on standard low-pressure LP-Gas. Provides brightness comparable to a 70-watt bulb. Preset air-intake eliminates adjustments. One
pound of propane produces approximately eleven hours of light. Models available for
cottage/cabin and RV applications. Durable Pyrex glass globes. Wall mount, or ceiling
mount one to three lights together with optional ceiling mount kit (OPK-3). Durable
finishes. Heat-resistant enamels will not chip or crack. AGA approved.
Manufacturer brought back Hunter Green color and added NEW Flat Chrome.
Series 9 Has a preformed mantle for home, cabin, cottage or other static applications.
• TC-1044HX
• E-100HX
GG20DNS Gasguard Nozzle
TC Series
Note: Pump Must Be Purchased at Time
of Core Exchange.
Series 9 Part #
Description
9-CC
9-HPB
9-NA
9-PG
9-RW
9-FL
9-GR
Classic chrome finish
High polished brass finish
Natural almond finish
Pebble gray finish
Rustic walnut finish
Flat chrome finish
Hunter green finish
Series 9T Uses flexible tie-on or clip-on mantle for campers and RV’s. Reduced breakage from vehicle motion.
Series 9T Part #
Description
9T-CC
9T-HPB
9T-NA
9T-PG
9T-RW
9T-FL
9T-GR
Classic chrome finish
High polished brass finish
Natural almond finish
Pebble gray finish
Rustic walnut finish
Flat chrome finish
Hunter green finish
A full range of parts & accessories are also available.
Page 5
Prepare Your Bobtail for Winter
Head into winter prepared! Use Teeco’s Winter Bobtail Preparation
Checklist and bring your trucks to Teeco for a full inspection to keep
them in top shape for the busy season.
Water Heater Clearance Sale
Ask your Teeco Representative about these Water Heater
Clearance Specials.
Winter Bobtail Preparation Checklist
Stock Up On:
•
•
•
•
•
•
Bosch Tankless Water Heaters
New Gloves for Every Driver
Standing Pilot Models: GWH-260-PN-N
& GWH-425-PN-N
Chock Blocks
Flashlights
Hydro-Generated Model GWH-425-HN-N
Replacement Regulators and Pigtails
Note: All above clearance models are
Natural Gas
Methanol, Methanol Injectors
Fire Extinguishers
Inspect & Repair:
•
•
•
•
•
Pumping Systems
Metering Systems
Piping Systems
Paloma Tankless Water Heaters
Hose Reels
Featuring continuous hot water on demand.
Compact, space saving design, energy efficiency and self-diagnostic program.
Indoor Models: PH-16FSN, PH-20RIFSN
and PH-28RIFSP
Outdoor Model: PH-28ROFP
Hose Assemblies
Let Teeco prepare your truck for the Winter season. Come to
Teeco any time of year for Truck Inspection & Repairs
Teeco Products, Inc
7471 Reese Road - Sacramento, CA 95828 Ph: 800-225-6621
Glove
Note: Units ending in -P are LP Gas, units
ending in -N are Natural Gas
Hand Injury Prevention at an Affordable Price!
tity
Quan ers
e
v
i
Rece ts on ord rs!
un
ai
Disco or more p
of 12
Multiple Models of Bradford White
Water Heaters, including:
Consolidator gloves feature nitrile coating for cut,
abrasion, snag and puncture resistance.
•
•
Fully lined with a soft, 100% cotton interlock lining, sewn in to
allow maximum dexterity.
•
Chemical splash resistant.
•
Launderable.
•
Elastic cuff.
•
Economical, comfortable.
Industrial Applications:
Ideal for light fabrication, material handling, parts assembly.
•
Item #
9745-7
Description
Now Available! Consolidator Gloves, Small
9745-9
Consolidator Gloves, Large
9745-10
Consolidator Gloves, X-Large
•
•
•
•
Mobile Home
Commercial
Residential
Standard Energy Saver
California Energy Saver
Energy Saver Extra Recovery
Note: All Bradford White clearance
models are LP-Gas
Ask your Teeco representative for a copy of flyer F-50 for
clearance pricing and current quantities available.
Page 6
Inside
Teeco Employee
Position
Time in the LP
Gas Industry
Vince Martinez
Warehouse
8 years
Adam Delatore
Fabrication
7 years
Arturo Partida
Warehouse
4 years
Bill Bailey
Warehouse
1 year
Charles Banks
Regional Operations Mgr
24 years
Dave Drimmel
Regional Sales Mgr
26 years
Dave Archey
Warehouse, Customer Service
15 years
Melissa DePaul
Customer Service
3 years
Tom Moore
Warehouse
2 years
Celebrating Teeco’s Employees
The Teeco Family has years of experience and a wealth of knowledge to share with our customers. Our 39 employees have a combined total of 755 years of service in the Propane Industry. We’d like
to take a moment to recognize each one of them.
Teeco Employee
Position
Teeco Products Auburn, WA
Time in the LP
Gas Industry
Teeco Products Sacramento, CA
Bob Bailey
Executive VP, COO
40 years
Jay Stephens
GM of Operations & Fabrication
36 years
Dean Travis
Regional Operations Mgr
12 years
Tom Valverde
Regional Operations Mgr
46 years
Dana Hall
Regional Sales Mgr
24 years
Paul Connelly
Engineering, Construction & Fabrication Mgr
43 years
Aaron Muffat
Warehouse, Customer Service
5 years
Mike Cooper
Fabrication Operations Supervisor
33 years
Leslie Miller
Office, Customer Service
2 years
Teeco Products Rapid City, SD
Dave Cox
Regional Sales Mgr
19 years
Jim Stephens
Warehouse
59 years
Gary Childress
VP of Administration, CFO
25 years
Bob Weston
Meter Proving
42 years
Steve Valverde
Pricing & Purchasing Manager
27 years
Teeco Products Irvine, CA Corporate HQ
Doug Warner
Engineering
35 years
Heidi Hargreaves
IT Manager
27 years
Robert Hoffhine
Fabrication
34 years
Theresa Staudinger
Human Resources Mgr
24 years
Jeff Garrow
Fabrication
31 years
Mary Clements
Marketing Mgr
15 years
Chad Bailey
Customer Service
14 years
Bill Klein
Purchasing
15 years
David Chaney
Fabrication
13 years
Kyle Umeda
Senior Accountant
9 years
Mike Metcalf
Customer Service
13 years
Jacqui Quenzer
Accounts Receivable
9 years
Janet Clark
Office, Customer Service
10 years
Trina Severino
Accounting Clerk
5 years
Herman Barnes
Warehouse
8 years
Bob Boyle
Warehouse
3 years
Training
Proper training for LP-Gas Industry members is essential. Several times a year, Teeco offers training
sessions on various propane equipment and repair
and maintenance issues free of charge to our customers and fellow industry members at Teeco locations,
at Industry Meetings and at our customers’ locations.
Teeco’s Bob Bailey, along with John Ives of Smith
Pumps, put on Pump and Meter classes in Idaho Falls,
Flagstaff, Portland and Auburn. Bob and several others provided training to California State Inspectors at
Teeco’s Sacramento location, and our Regional Sales
Managers, Dave Drimmel, Dave Cox and Dana Hall
provided hands on training at customers’ locations on
RegO Regulators and Valves, Algas Vaporizers, Smith
Pump and Bypass Valves, and Continental Fittings.
All in all, Teeco has provided training for over 300 industry professionals this year.
If you would like to receive training at your location, please contact your Teeco Sales Manager or your nearest Teeco Branch.
Page 7
Presorted Standard
U.S. Postage
PAID
ted
a
c
i
d
De
ur
to Yo s
es
Succ
PRODUCTS, INC.
Corporate Office
16881 Armstrong Avenue
Irvine, CA 92606
Newport Beach, CA
Permit No. 373
Customer Service Locations
Sacramento, CA
(800) 225-6621
FAX (888) 225-6621
Auburn, WA
(800) 426-9456
FAX (888) 426-9456
Rapid City, SD
(800) 843-8660
FAX (888) 843-8660
Order Online, Anytime: www.teecoproducts.com
Inside
VT1-32C Mini Dragon Propane Torch Kit
18,000 BTU/hr. Perfect for smaller jobs around the home and garden. The pin point flame is perfect for precise spot weeding and
other small jobs like lighting charcoal, chimineas, campfires and
more. Uses disposable propane cylinders (not included). Lightweight and easy to maneuver.
What Is This Product?
Guess the name or part # of this product - or
how it’s used - and we’ll enter you in a drawing
for a special prize.
We’re also including a prize for the most
humorous or inventive response.
Email your answer to:
[email protected],
Fax to: 949-474-8663, Attn: Marketing Dept. or
Mail to : TEECO Products, Inc.
Attn: Marketing Dept.
16881 Armstrong Avenue
Irvine, CA 92606
Convenient, simple and lightweight design - Adjustable flame Non-slip grip - Fuel efficient - Durable steel construction - Comes
fully assembled.
Item #
Description
VT1-32C
Propane torch kit
SL-32C
Hose Kit for VT1-32C
Answer to last “What Is This Product?”
The product pictured in the July – August Teeco Topics is a Jay
Stephens’ Autographed Bee Stinger Replacement Kit (Patent
Pending). As one can see, the clear handle provides a waiting
area for bees while the technician is replacing stingers on a first
come, first served basis. Many thanks to Jay for working on the
mysterious problem of our nation’s disappearing bee population! (Caution: do not attempt to use this product to replace stingers on
hornets, wasps or yellow jackets!)
- Dan Binning, Kiva Energy, Inc.
This is called a Pin Vise, used for holding large
gauging drills securely while reaming. This is the
only tool the boss knows how to use, because
all the employees around here are always getting
reamed.
- Shawn
(We’re not giving too much of his information here
because we don’t want this tool used on Shawn!)
Page 8
TL-072
Pin Vise
H7