TSS-1100 - Vislink

TSS-1100
Transport Stream Switch
Vislink’s V-Net Solution collects, manages, and
distributes mission critical actionable intelligence
for crisis response. This end-to-end solution
transmits video, voice, and data from the field to
the decision makers who need it most.
TSS-1100 TSoIP Switch
As part of the V-Net Solution, the TSS-1100 TSoIP Switch
provides intelligent redundancy switchover between
MPEG transport streams delivered over IP-only and IP/ASI
networks. It ensures the robust transmission of transport
streams by continuously monitoring all inputs, switching
seamlessly to the backup stream if errors are detected or
services or components are lost. Network operators now
have the ability to monitor and handle multiple transport
streams over IP and/or ASI and configure multiple switches
per unit. This provides greater flexibility and improved
reliability within an IP infrastructure or in a hybrid IP/ASI
environment.
The TSS-1100 is designed to ensure the delivery of highquality video content by simplifying the monitoring,
analysis and switching of transport streams and services
throughout video broadcast networks. All inputs are
monitored simultaneously in each switch. Any delay
differences between the inputs are automatically
compensated for, enabling seamless switching without any
disturbance to end users. The unit also supports switching
between ASI and IP input signals, as well as switching
between non-identical transport streams without having
sync loss on the output. The TSS-1100 also supports IP
unicast and multicast, as well as output diversity in which a
transport stream can be sent to multiple different unicast
or multicast IP destinations.
RX SITE A
RX SITE B
HDR-3000
BENEFITS
■■Increases Service Uptime and Ensures the Best
Viewer Experience
Site D
■■Enable broadcasters and operators to meet SLA
requirements
Site B
■■Reduce costs of redundancy
Site A in video centric
ath
networks
tP
h
Flig Site C
t
f
a
■■Multimode operation
cr for adaptive TS matching (SFN/
Air TS/PID)
Null packet agnostic/
■■Seamless switching in DVB-T/T2 SFN networks
■■Integrated TS monitoring and error detection
based on ETR 101 290 input monitoring and error
detection
■■Dual GbE interfaces
■■Dual power supply
■■User-friendly configuration and control
RX SITE C
HDR-3000
HDR-3000
CUSTOMER SECURE
DATA NETWORK
Airborne
Downlink
Transmitter
RF
Aircraft
Flight Path
COLLECTION POINT
TSS-1100
VIDEO / AUDIO
UDP/IP
ENCRYPTED
RX Site D
Unavailable
L2174
RX Site A
Available
RX Site B
Available
RX Site C
Marginal
Key Features
Typical Applications
■■ IP Provides Cost and Flexibility Benefits Without
Loss of Quality or Functionality
■■ Intelligent Seamless Switching Between Multiple
ASI and IP Input Streams
■■ Forward Error Correction on Input and Output
■■ Flexible Switch Configuration
■■ IP-Based
Centric
Networks
TSS1100 utilizedVideo
in an Airborne
Video
Downlink IP Diversity Application
■■ Airborne Video Downlink IP Diversity Solutions
■■ Satellite Uplink Distribution And Contribution
Networks
■■ Broadcast DTT Feeds For DVB-T And DVB-T2
Networks
SPECIFICATIONS
ETHERNET INTERFACES
■■Type: 2 x 100/1000 Base-T
Ethernet 1 x SFP (option)
■■Connectors: RJ45 (100/1000
Base-T), SFP
■■TS Encapsulation: SMPTE
2022-2
■■Forward Error Correction:
SMPTE 2022-1
■■Protocols: IEEE 802.3 Ethernet,
VLAN (802.1Q) ARP, IPv4,
UDP, TCP, RTP, IGMPv2/3
SWITCH CAPABILITIES
■■No. of switches: 1-4 switches
per unit
■■No. of input per switch: 2-4 TS
inputs per switch
■■No. of outputs: 1-8 TS outputs
copies per switch
■■Max TS over IP inputs: 8 (2x4)
■■Max TS over IP outputs: 32
(8x4)
MONITORING AND ANALYSIS FEATURES
■■Monitoring:
■■Transport Stream analysis:
■■ETR 101 290 Priority 1 real■■Effective and total bitrate.
time monitoring of all inputs.
■■Overview of all PIDs.
■■Configurable thresholds
■■Service analysis: Service Id,
values.
name and components.
CONTROL AND MANAGEMENT
■■Type: 1 x 10/100 Base-T
Ethernet, RJ45
■■Features:
■■Element control through
HTTP/WEB
■■XML Configuration import
and export via HTTP
■■SNMP traps for integration
with NMS
■■SNMP MIBs for export of
transport stream information
and alarm status
PHYSICAL AND POWER
■■Input Voltage: 100-240V AC
+/- 10%, 50/60 Hz Dual AC
Power Supply
■■Input Voltage Option: -48V
DC
■■Dimensions: 1RU, full-width
19’ (WxDxH) 420 x 300 x
44.5mm
■■Power Consumption: ~35 W
ASI INTERFACE (OPTION)
■■Inputs: 4 x DVB-ASI
■■Outputs: 4 x DVB-ASI (in
passive mode each input
is passed through to its
corresponding output)
■■Switching modes:
■■Automatic with input
prioritization
■■Manual switch-over
■■Matching modes: Normal or
Ignore Null Packets mode
■■Redundancy switching: 2:1, 3:1,
and 4:1 Redundancy switching
■■TS delay compensation:
Automatic or manual
■■PID analysis:
■■Type, scrambling and dynamic
bitrate.
■■Graphical view of bitrate.
■■Bit rate monitoring with
configurable min and max
threshold for any PID.
■■Alarm log: Circular persistent
log of up to 10,000 entries.
■■Protocol: HTTP, XML,
SNMPv2c
■■Local control: USB
■■Alarm Relay: 9 pin D-SUB
■■Maintenance Port: USB
version 1.1
COMPLIANCE
■■CE: 73/23/EEC (Low
voltage equipment) 89/336/
EEC (Electromagnetic
compatibility)
■■CSA: Designed for CSA
approval
■■Safety: IEC60950 and
EN60950
■■EMC: EN55022, EN55024,
EN6100-3-2
ENVIRONMENTAL
CONDITIONS
■■Operating Temperature:
0°C - +50°C
■■Storage Temperature:
-20°C - +70°C
■■Relative Humidity: 5% to 95%
(non condensing)
The TSS-1100 maintains adjustable and dynamic buffers on each
input so that when the actual switch happens, the two transports
streams are perfectly aligned, providing the viewer with a constant and
uninterrupted image. Up to 13 inputs are available utilizing additional
switch options.
Datasheet
TNS544 TSoIP Switch
1
2
IN
IN
OUT
IN
OUT
DATA
DATA
DATA SFP
4
3
CONTROL
OUT
IN
OUT
ALARM / RESET
1PPS
GND
USB
PSU
ALARM
AC100-240V
0,7A 50-60Hz
Dual AC PSU version (1RU, full width 19”)
Ethernet Interfaces
07/15 ENG
RD001093 Rev 2
Dual AC PSU version (1RU, full width 19”)
www.vislink.com • [email protected]
Control and Management
Type: 2 x 100/1000Base-T Ethernet
Type: 1 x 10/100 Base-T Ethernet, RJ45
© 2014 Vislink Group. All rights reserved. All other products or services referenced herein are identified by the
1 x SFP
(option)
trademarks
or service
marks of their respective companies or organisations. Note: Vislink reserves the right to
Features: Element control through HTTP/WEB
change specifications without notice. Please contact your representative to confirm current specifications.
Connectors: RJ45 (100/1000Base-T), SFP
XML Configuration import and export