Metal Bending and Fabricating Machinery

Metal Bending and Fabricating Machinery
Pro
Series
Metal Bending Machines
Pro 14
Available in four machine lengths, the Pro 14 combines a 14" (356mm) throat depth with a wide 2-3/8" (60mm) mouth opening
and patented inside working pockets. From soffit and fascia to custom brick mould, sill trim, window casing, chimney flashing and
more, the Pro 14 easily produces custom pieces for any siding and roofing application. Its efficient, secure locking system uses a
pulling motion rather than a pushing motion, allowing you to be closer to the tool when working with larger pieces. Individual
bending handles also enhance easy operation, letting you get closer to the work. Our patented Moving Pivot Hinge allows
increased bending power, and our unique hemming capability allows for 180-degree overbends to produce more rigid panels.
BEND CAPACITY
Model
Pro 14 8'6"
(2.6 metre)
Working Length
2600mm
Mild Steel
0.47mm
Aluminium
0.8mm
Copper
0.5mm
Zinc
0.5mm
Maximum Bending Angle 180°
Pro 14 10'6"
(3.2 metre)
3200mm
0.47mm
0.8mm
0.5mm
0.5mm
180°
Pro 14 HD 10'6"
(3.2 metre)
3200mm
0.55mm
1mm
0.6mm
0.6mm
180°
Pro 14 12'6"
(3.81 metre)
3810mm
0.47mm
0.8mm
0.5mm
0.5mm
180°
Mouth Opening
Machine Packaging Size
60mm
60mm
60mm
60mm
2650 x 500 x 250
3260 x 500 x 230
3260 x 500 x 230
3260 x 500 x 230
Stand Packaging Size
1630 x 330 x 100
1630 x 330 x 100
1630 x 330 x 100
1630 x 330 x 100
Approx Nett Weight
44kg
54kg
63kg
63kg
Approx Gross Weight
64kg
74kg
83kg
84kg
LxWxH (mm)
LxWxH (mm)
(machine)
(with stand)
NOTE: machine/stand sizes and weights quoted differ from actual shipping sizes/weights. Please contact us for a shipping quotation or to obtain
factual information on palleted weights and dimensions.
-2-
Pro 19
The Pro 19 delivers added value with more efficient bending and storage to reduce time-consuming handling and flipping of
material. It efficiently creates soffit, fascia, custom brick mould, gutter aprons, chimney flashing, drip edges, window casing and
sill trim, and easily produces flashing for any roof application. The locking system is efficient, using a pulling motion rather than
a pushing motion, allowing you to be closer to the tool when working with large coil. The metal bending machines’ individual
bending handles allow you to get closer to the work compared to loop-design handles that can inhibit proximity. Tapco’s patented
Moving Pivot Hinge allows increased bending power without marring materials, while dual locking handles provide fast, secure
clamping. The Pro 19 is available in 3 length configurations (see table below).
BEND CAPACITY
Model
Working Length
Mild Steel
Aluminium
Copper
Zinc
Maximum Bending Angle
Pro 19 8'6"
(2.6 metre)
2600mm
0.47mm
0.8mm
0.5mm
0.5mm
180°
Pro 19 10'6"
(3.2 metre)
3200mm
0.47mm
0.8mm
0.5mm
0.5mm
180°
Pro 19 12'6"
(3.81 metre)
3810mm
0.47mm
0.8mm
0.5mm
0.5mm
180°
Mouth Opening
Machine Packaging Size
60mm
60mm
60mm
2650 x 600 x 240
3260 x 600 x 230
3850 x 600 x 230
Stand Packaging Size
1630 x 330 x 100
1630 x 330 x 100
1630 x 330 x 100
Approx Nett Weight
50kg
64kg
76kg
Approx Gross Weight
70kg
84kg
96kg
LxWxH (mm)
LxWxH (mm)
(machine)
(with stand)
Pro 19 Shown with optional:
• Angle Gauge
• PRO Cut-Off Gauge
• Side-Winder
• Snap Stand
• Wheel Kit
NOTE: machine/stand sizes and weights quoted differ from actual shipping sizes/weights. Please contact us for a shipping quotation or to obtain
factual information on palleted weights and dimensions.
Pro Series Metal Bending Machine
Side-Winder
Angle Gauge
Pro Cut-Off Gauge
Pro Cut-Off
Snap Stand with optional wheel kit
Pro Series Accessories (see pages 10/11)
Pro Cut-Off
Power Cut-Off
Brake Buddy
Angle Gauge
Snap Stands
-3-
Wheel Kit
Cut-Off Gauge
Side-Winder
MAX-20
Metal Bending Machine
The Tapco MAX-20 is a portable bending machine
for forming commercial and industrial metals in the
workshop or on the job site. The MAX-20 is available in
5 length configurations (see table below).
Key Features:
lConstructed using lightweight anodized alloys and
toughened steel for maximum strength, durability
and portability.
l
48cm throat depth with a 6.0cm mouth opening.
lCapable of producing perfect bends in 0.7mm Steel,
1.0mm Aluminium and 0.8mm Zinc. The MAX-20 is
also capable of 180° Hemming.
lPatented “Moving Pivot Hinge” enables quick
and easy adjustment of the clamping tension on
material.
lStrong computer designed, precision machined die
castings handle the toughest jobs. Tapco’s “Positive
Clamping System” locks material down quickly and
securely.
lThe MAX-20 is designed for portability – ideal for
use in the workshop or on the job site.
lA 3.20m model weighs just 72kg for easy
transportation between jobs.
Model
MAX-20 1.2
METRE
MAX-20 2.2
METRE
MAX-20 2.6
METRE (8'6")
MAX-20 3.2
METRE (10'6")
MAX-20 3.8
METRE (12'6")
MAX-20 4.4
METRE (14'6")
Working Length
Mild Steel
Aluminium
Copper
Zinc
Maximum Bending Angle
1200mm
0.7mm
1mm
0.8mm
0.8mm
135°
2200mm
0.7mm
1mm
0.8mm
0.8mm
135°
2600mm
0.7mm
1mm
0.8mm
0.8mm
135°
3200mm
0.7mm
1mm
0.8mm
0.8mm
135°
3800mm
0.7mm
1mm
0.8mm
0.8mm
135°
4400mm
0.7mm
1mm
0.8mm
0.8mm
135°
Mouth Opening
Machine Packaging Size
60mm
60mm
60mm
60mm
60mm
60mm
1400 x 690 x 300 2400 x 690 x 300 2800 x 690 x 300 3400 x 690 x 300 4000 x 690 x 300 4600 x 690 x 300
Stand Packaging Size
1950 x 410 x 220 1950 x 410 x 220 1950 x 410 x 220 1950 x 410 x 220 1950 x 410 x 220 1950 x 410 x 220
Approx Nett Weight
23kg
60kg
77kg
90kg
106kg
121kg
Approx Gross Weight
65kg
102kg
119kg
132kg
148kg
205kg
BEND CAPACITY
(MACHINE ONLY)
LxWxH (mm)
LxWxH (mm)
(machine)
(with stand)
(INCLUDING SNAP
STAND, MAX CUT-OFF &
TUNE UP KIT)
(INCLUDING SNAP
STAND, MAX CUT-OFF &
TUNE UP KIT)
(INCLUDING SNAP
STAND, MAX CUT-OFF &
TUNE UP KIT)
(INCLUDING SNAP
STAND, MAX CUT-OFF &
TUNE UP KIT)
(INCLUDING SNAP
STAND, MAX CUT-OFF &
TUNE UP KIT)
NOTE: machine/stand sizes and weights quoted differ from actual shipping sizes/weights. Please contact us for a shipping quotation or to obtain
factual information on palleted weights and dimensions.
MAX-20 Accessories (see pages 10/11)
MAX Cut-Off
Power Cut-Off
Brake Buddy
Angle Gauge
-4-
Snap Stands
Wheel Kit
Cut-Off Gauge
Curling Attachment
SUPERMAX
Metal Bending Machine
Key Features:
l33% bending capacity increase making it the
strongest portable brake available.
lConstructed using lightweight anodized alloys and
toughened steel for maximum strength, durability
and portability.
lCapable of producing perfect bends in 1mm Steel,
1.5mm Aluminium and 1mm Zinc. The SUPERMAX is
also capable of 180° Hemming.
lUse with the MAX Cut-Off or Power Cut-Off for
cutting perfectly straight narrow strips in lengths of
Steel, Aluminium or Zinc.
lImproved version of the Patented ‘Moving Pivot
Hinge’ enables quicker and easier adjustment of the
clamping tension on material.
Model
BEND CAPACITY
Improved and strengthened in every department, the
SUPERMAX is the most powerful portable bending
machine on the market. The SUPERMAX is available in 4
length configurations (see table below).
SUPERMAX 8'
SUPERMAX 10'
SUPERMAX 12'
SUPERMAX 14'
Working Length
Mild Steel
Aluminium
Copper
Zinc
Maximum Bending Angle
2600mm
1mm
1.5mm
1mm
1mm
135°
3200mm
1mm
1.5mm
1mm
1mm
135°
3800mm
1mm
1.5mm
1mm
1mm
135°
4400mm
1mm
1.5mm
1mm
1mm
135°
Mouth Opening
Machine Packaging Size
60mm
2650 x 700 x 300
60mm
3300 x 700 x 300
60mm
3900 x 700 x 300
60mm
4500 x 700 x 300
Stand Packaging Size
2350 x 1000 x 260
2350 x 1000 x 270
2350 x 1000 x 270
2350 x 1000 x 520
Approx Nett Weight
125kg
149kg
166kg
184kg
Approx Gross Weight
203kg
230kg
247kg
340kg
LxWxH (mm)
LxWxH (mm)
(machine)
(with stand)
(INCLUDING SNAP STAND,
CUT OFF, TUNE UP KIT)
(INCLUDING SNAP STAND, CUT
OFF, TUNE UP KIT)
(INCLUDING SNAP STAND, CUT
OFF, TUNE UP KIT)
(INCLUDING SNAP STAND,
CUT OFF, TUNE UP KIT)
NOTE: machine/stand sizes and weights quoted differ from actual shipping sizes/weights. Please contact us for a shipping quotation or to obtain
factual information on palleted weights and dimensions.
Die castings with reinforcing ribs for
increased bending performance.
Double-walled pivot
arms provide added
strength.
l50cm throat depth with a 6.0cm mouth opening –
the largest in the industry.
lStrengthened stand design with the option to
anchor to the workshop floor resulting in accurate
repeat bends.
Adjustable MAX Cut-Off
SUPERMAX Stand offers
complete stability with
its trapezoidal design and
wider plank.
New ergonomic handles offer a
better grip and added leverage.
Moving hinge system is easy to
maintain and increases bending power.
SUPERMAX Accessories (see pages 10/11)
MAX Cut-Off
Power Cut-Off
Brake Buddy
Angle Gauge
-5-
Snap Stands
Cut-Off Gauge
ECO-MAX
&
PRO-MAX
Metal Bending Machines
Similar to the SHOPMAX, the ECO-MAX features an open-backed construction enabling the
user to make wide and complex metal shapes. The machine is very portable and includes
four heavy-duty, fully lockable wheels for quick and easy manoeuvrability.
BEND CAPACITY
Key Features:
ECO-MAX Cut-Off
l
Lightweight and portable.
l
Open back.
l
Removable Stand.
l
Includes Cut-Off.
l
Welded steel structure for optimum performance.
Model
Working Length
Mild Steel (400N/mm²)
Stainless Steel (500N/mm²)
Aluminium
Copper
Zinc
Mouth Opening
Clamping Edge
Pallet Size LxWxH (mm)
Weight
ECO-MAX
2010mm
0.6mm
0.5mm
1mm
0.8mm
0.8mm
50mm
15°
2600 x 600 x 1100
120kg
PRO-MAX
2005mm
0.6mm
1mm
0.8mm
1mm
50mm
15°
2400 x 900 x 1150
170kg
NOTE: machine/stand sizes and weights quoted differ from actual shipping sizes/weights. Please
contact us for a shipping quotation or to obtain factual information on palleted weights and dimensions.
Back Stops for
PRO-MAX
The PRO-MAX features an open-backed construction enabling the user to make wide and
complex metal shapes. The machine is very portable and includes four heavy-duty lockable
wheels for easy manoeuvrability.
Key Features:
l
Lightweight and portable.
l
Open back.
l
Removable Stand.
l
Optional Cut-Off.
l
Welded steel structure for optimum performance.
ECO-MAX & PRO-MAX Accessories (see pages 10/11)
Cut-Off
Brake Buddy
-6-
PRO-MAX Back Stops
SHOPMAX
Metal Bending Machine
Built-in Angle
Gauge
Optional Cut-Off
Shown
The Tapco SHOPMAX is designed for heavy-duty workshop use. Featuring a unique open-backed construction the SHOPMAX
enables the user to achieve very wide and complex metal shapes. The SHOPMAX is available in 3 length configurations
(see table).
Key Features:
bends to be achieved.
l
Adjustable radius of bend.
lAll-steel construction increases stability for every day
workshop use.
l
Working length is a full 2000 to 3000mm.
lSpring and gas cylinder system makes closing and
bending easier.
lCompact and protective packaging prevents
transportation damage.
l
Optional Cut-Off and Power Cut-Off available.
BEND CAPACITY
lOpen backed construction allows wide and complex
Model
Working Length
Mild Steel
Stainless Steel
Aluminium
Copper
Zinc
Maximum Bending Angle
SHOPMAX 2000/1
2100mm
1mm
0.6mm
1.5mm
1.5mm
1.5mm
165°
SHOPMAX 2500/0.8
2510mm
0.8mm
0.4mm
1mm
1mm
1mm
165°
SHOPMAX 3000/0.5
3010mm
0.6mm
0.4mm
1mm
1mm
1mm
165°
Mouth Opening
Machine Size (without backstop)
100mm
100mm
100mm
2300 x 760 x 1100
2800 x 760 x 1100
3300 x 760 x 1100
Machine Size (on pallet)
2300 x 800 x 1300
2800 x 800 x 1300
3300 x 800 x 1300
Approx Nett Weight
Approx Gross Weight
350kg
380kg
420kg
450kg
540kg
575kg
LxWxH (mm)
LxWxH (mm)
NOTE: machine/stand sizes and weights quoted differ from actual shipping sizes/weights. Please contact us for a shipping quotation or to obtain
factual information on palleted weights and dimensions.
SHOPMAX Accessories (see pages 10/11)
Cut-Off
Power Cut-Off
Brake Buddy
-7-
SHOPMAX Back Stops
SHOPMAX
HD
Metal Bending Machine
Offering a full 100% greater bending power the Tapco SHOPMAX HD models are designed for
ultra-heavy-duty workshop use. Offering all the standard SHOPMAX features but with double
the bending capacity. The SHOPMAX HD is available in 4 length configurations (see table below).
Key Features:
lOpen backed construction allows wide and complex bends
to be achieved.
l
damage.
Adjustable radius of bend.
l
lAll-steel construction increases stability for every day
workshop use.
l
lCompact and protective packaging prevents transportation
Optional Cut-Off and Power Cut-Off available.
l100% greater bending capacity than standard SHOPMAX
models.
Working length is a full 2000 to 4000mm.
l
Integrated Angle Gauge available on all HD models.
lSpring and gas cylinder system makes closing and bending
BEND CAPACITY
easier.
Model
Working Length
Mild Steel
Stainless Steel
Aluminium
Copper
Zinc
Maximum Bending Angle
SHOPMAX 2000 HD/2
2020mm
2mm
1.25mm
3mm
3mm
150°
SHOPMAX 2500 HD/1.2
2520mm
1.2mm
0.8mm
2.5mm
2.5mm
150°
SHOPMAX 3000 HD/1
3020mm
1mm
0.6mm
2mm
1.5mm
1.8mm
150°
SHOPMAX 4000 HD/0.6
4020mm
0.6mm
0.4mm
150°
Mouth Opening
Machine Size (without backstop)
120mm
120mm
120mm
120mm
2600 x 650 x 1200
3100 x 650 x 1200
3600 x 650 x 1200
4600 x 850 x 1200
Machine Size (on pallet)
2600 x 800 x 1400
3100 x 800 x 1400
3600 x 800 x 1400
4600 x 1000 x 1400
Approx Nett Weight
Approx Gross Weight
915kg
950kg
1115kg
1150kg
1300kg
1335kg
1600kg
1650kg
LxWxH (mm)
LxWxH (mm)
NOTE: machine/stand sizes and weights quoted differ from actual shipping sizes/weights. Please contact us for a shipping quotation or to obtain
factual information on palleted weights and dimensions.
SHOPMAX HD Accessories (see pages 10/11)
Cut-Off
Power Cut-Off
-8-
Brake Buddy
SHOPMAX HD Back Stops
SAW
TABLES
&
SLITTERS
Precision Machines
ProTrax shown on
optional Snap Stand
ProTrax™ / MAXTrax™
The saw table designed for professional siding mechanics. Designed for oversized material.
lCuts multiple angles from 90° to 360°.
lCaptured saw track provides secure & safe
MAXTrax: even on 16" (406mm) panels.
l
ProTrax extended full working length: 16 ft (4.9m).
lProTrax: 13" (330mm) Deck width.
operation.
lFree-floating saw boom for flexibility and time
savings at the job site.
MAXTrax: 20"
(508mm) Deck width.
lProTrax: Working weight: 37.2 kg.
l
MAXTrax: Working weight: 51.3 kg.
l
Will accept material thickness up to 1.5" (38mm).
lLightweight and durable tubular frame system.
lAccommodates almost any 7¼" (184mm) circular saw. l
Length: 2.54 m.
Port-O-Slitter® 24" System
Portable precision slitting and rib forming system.
lTwo sets of cutting knives included to make single or
multiple factory quality cuts.
l
Forms strengthening ribs and perforates most materials.
l
Optional 1/2 H.P. Motor Kit (specify 110v or 220v), available.
l
Working weight: 37.2 kg
lCapacity:
Soft Aluminium up to 0.76mm, Galvanized Steel up to
0.4750mm, Copper Sheet & Coil: Up to 0.8mm.
Port-O-Slitter shown with optional accessories:
Slitter Snap Stand, Slitter Cut-Off, and PRO-Coiler
Saw Table & Slitter Accessories (see pages 10/11)
Slitter Cut-Off
Snap Stands
ProTrax/MAXTrax Wheel Kit
ProTrax™ Deck Extender Kit
-9-
Slitter PRO-Coiler
Accessories
For Metal Bending Machines, Saw Tables & Slitters
Angle Gauge
Back Stops
The Tapco Angle Gauge adds uniform precision and
takes the guess work out of your bends. Quickly shows
the bending angle with bold, easy-to-read numbers.
Mounts easily onto the following machines:
Tapco Back Stops for metal bending machines. Functions
as a material stop allowing the user to measure out the
material to be cut or bent. Maximum length of 2 metres.
Light-weight aluminium structure that is user-friendly
and incorporates a built-in tape for ease of measurement.
The unit can be easily removed If necessary. Back Stops
are available for the following machines:
l
Pro 14.
l
Pro 19.
lPRO-MAX.
lMAX-20.
lSUPERMAX.
l
SHOPMAX (2000 & 2500).
l
SHOPMAX HD (2500, 3000 & 4000).
Brake Buddy
The Brake Buddy is a revolutionary tool that can add value to every
siding job by delivering enhanced style and individuality to your trim
pieces. The Brake Buddy allows you to produce brick mould trim and
decorative ribs in seconds. The measurement guide and quick-twist
handle deliver quick adjustments and simple, efficient operation. For
use with any Tapco portable bending machine. Includes moulded
plastic storage case.
lCapacities: 0.5mm aluminium, PVC-coated aluminium,
vinyl-coated trim coil.
l
Weight: 6kg.
Standard Rollers – Included in Brake Buddy Fascia Kit:
lRib Rollers.
l
Graduated Brick Mould Rollers.
Optional Rollers – Sold Separately:
l
Traditional Brick Mould Roller Kit.
l
V-Groove Roller Kit.
l
Crown Mould Roller Kit.
Cut-Off
PRO Cut-Off™
Cut-Off™
The PRO Cut-Off lets you quickly and safely make factory-quality cuts right on your
bending machine. Its single-pass cutting precision eliminates the use of dangerous
utility knives and open blades, and the costly knifing damage they can cause to
bending hinges. The ergonomic grip allows smooth, sure-handed operation. Includes
molded plastic storage case, along with two PRO Cut-Off Gauges to simplify cutting
with easy distance identification. Lightweight aluminium construction is built to
last. For use with all PRO Series bending machines (1995 and after). Capacities:
Aluminium up to 0.8mm, Galvanized Steel up to 0.375mm, Copper up to 0.6mm, All
Vinyl.
Cut-Off accessories are also available on the following bending
machine ranges; please contact us for further information:
Pro 14.
l
Pro 19.
ECO-MAX
l
PRO-MAX.
l
SHOPMAX.
l
SHOPMAX HD.
Port-O-Slitter® Cut-Off™
Available for the following bending machines:
l
l
The Port-O-Slitter® also has it’s own Cut-Off™; please contact
us for further information.
Adjustable MAX Cut-Off™
Making cuts in heavy-duty sheet metal couldn’t be easier. The Adjustable MAX
Cut-Off can be used to provide factory-quality cuts in a range of dense metals.
The easy-adjust mechanism brings maximum versatility while the ergonomic grip
allows smooth, sure-handed operation and eliminates the need for unsafe utility
knives and conventional shears. The Adjustable MAX Cut-Off pays for itself by reducing scrap and costly knifing damage to bending hinges, while delivering precise,
single-pass cuts. Lightweight aluminium construction is built to last. Includes
moulded plastic storage case. Capacities: Aluminium up to 1.2mm, Galvanized Steel
up to 0.56mm, Soft Copper up to 1mm, Stainless Steel up to 0.56mm.
Available for the following bending machines:
lMAX-20.
lSUPERMAX.
Curling
Attachment
Curling Attachment accessory for the MAX-20 metal bending machine. This
accessory is for the fixation of an edge on rainwater guttering fabrication. Welded
steel-structure for greater reliability and longevity of use. During sheet metal
feed a turnable latch prevents the rod from sliding out:
l
Length: on demand (usually between 2 to 4 metres).
l
Curling Rod diameter: on demand (usually 12mm).
Please note: the appropriate rod diameter must be used to prevent the “rollingup” of material when using different sheet metal types and thicknesses.
- 10 -
Power Cut-Off
PRO Coiler
The Tapco Power Cut-Off can be used to
accurately cut aluminium, steel, zinc or
copper. This accessory can be used on
any of the following bending machines
when used with the MAX Cut-Off Adapter
(pictured):
The lightweight, easy-to-use PRO Coiler
enhances your efficiency by securing
coil right on to the Port-O-Slitter with
Snap Stand. No more windblown, dirty,
damaged coils. Attaches in seconds and
allows rapid coil changes. Perforating rolls
are sold separately.
lMAX-20.
lSHOPMAX.
lSUPERMAX.
l
SHOPMAX HD.
l
Capacity: Up to 610mm x 30.5 metres.
l
Working Weight: 4.6kg.
Power
Cut-Off
Adjustable
Guide
Pro Cut-Off
Gauge
ProTrax™ Deck
Extender Kit
Make cuts faster without
measuring each cut.
Available for:
Tapco Power Cut-Off
Adjustable Guide to fit:
l
Extends table deck to 508mm to
accommodate siding, soffit, and decorative
siding profiles. Converts the saw table into
a layout table or universal workstation. Kit
contains 2 extension pieces. Available for:
l
PRO Cut-off™.
l
Power Cut-Off.
ProTrax™ Saw Table.
Snap Stands
Completes your portable bending machine and saw table system with sturdy, solid support that sets up in
seconds. Legs adjust independently to level on uneven ground and fold flat for easy storage. Machine and saw
tables easily snap and lock into place. Adjustable heights from 737mm to 864mm. Optional wheel kit available
for optimum portability.
Weight: 17kg.
Optional 2-Wheel Kit for Snap Stands Also Available.
For use with the following bending machines/saw tables:
l
Pro 14.
lMAX-20.
l
Pro 19.
lMAXTrax™.
lProTrax™.
Pro 14 Folding Legs
Light duty leg set for use with the Pro 14 bending machine.
Sturdy tubular steel construction. 762mm high legs fold compactly
for easy portability and storage and weigh just 6.4kg.
Wheel Kit
Side-Winder™
Optional Wheel Kit for Snap Stands to
enhance the portability of your machine,
2-wheel kit, easy attachment with tough
254mm pneumatic tires on steel hubs;
weight 4.5kg. To fit the Snap Stands for
the following machines:
l
Pro 14.
l
ProTrax™ Saw Table.
The Side-Winder™ enhances your efficiency by
securing coil right on to your Tapco Tool system
and feeding directly into the jaws of your
bending machine – no more windblown, dirty,
damaged coils. Attaches in seconds to Pro 14 or
Pro 19 machines (excluding 12'6" – 3.81 metre).
Delivers precise cuts with integrated guide for the
optional PRO Cut-Off roller shear.
l
Pro 19.
l
MAXTrax™ Saw Table.
l
Capacity: Up to 610mm x 30.5 metre coil or
maximum capacity up to 23kg.
lMAX-20.
l
- 11 -
Working Weight: 11kg.
Tapco® Tools
Unit 32, Tokenspire Business Park,
Hull Road, Woodmansey, Beverley,
East Yorkshire, HU17 0TB,
United Kingdom
Tel: +44 (0)1482 880478
Fax: +44 (0)1482 880678
©2014 Tapco International Corporation.
[email protected]
www.tapco-europe-tools.com
Item: TT01-08-2014