Rental Equipment Quick Reference

Transcription

Trenchers
Rental Equipment
Quick Reference
Model
RTX100
RT200
RT450 / 450BH
RT650
RTX750BH
RT950 / 950BH
RT1250 / 1250BH
T555 II
LM42 Lawn Plow
(BH=backhoe)
HP
15
23
50
76
75
99
120
185
42
Depth
24”
36”
48”
60”
60”
60”
72”
72”
Width
4”
6”
6”
7”
7”
8”
10”
12-18”
numerous
Page
pg.2
pg.3
pg.4
pg.5
pg.6
pg.7
pg.8
pg.9
pg.10
*Plow depth 8-24” / Trencher depth 36” x 4” wide
TC4A - Trench Compactor
pg.11
Chippers
3 Convenient Locations.
Call for Reservations.
Model
BC600XL
BC1000XL
BC1500
BC1800XL
BC2100XL
HP
27
85
122
115
275
Capacity
6”
12”
15”
19”
21”
Page
Width
35”
35”
35”
Page
pg.12
pg.13
pg.14
pg.15
pg.16
Stump Cutters
Colorado Springs
719-382-1947
1030 Transit Drive
Colorado Springs, CO 80903
Commerce City/Denver
800-525-0477
5801 E. 76th Avenue
Commerce City, CO 80022
Grand Junction
970-244-9177
712 Arrowest Court
Grand Junction, CO 81505
Model
SC252
SC352
SC1152
HP
27
35
110
pg.17
pg.18
pg.19
Horizontal Grinders
Model
HG200
HG4000TX
HG6000TX
HP
85
440
635
Capacity
15’
25”
32”
Page
pg.20
pg.21
pg.22
Vacs (Vacuum Excavators)
Model
V250
VL55
V500
HP
15
31
49
Gal. Cap.
250
550
500
Hose
33’
33’
40’
Page
pg.23
pg.23
pg.23
Miscellaneous
S600TX Mini Skid Steer
S600TX attachments
TS44A Tree Spade
Moles (piercing tools)
521 Wildcat Trommel
25 HP 2,350 lbs
numerous
44” capacity
pg.24
2, 2.5, 3, 4, & 5.5”
Trommel Screen
pg.27
pg.28
pg.25
pg.26
RTX100
HYDROSTATIC TRENCHER
24” Deep x 4” Wide Trench
RTX100
Specifications
General
Horsepower:
Weight:
15 (gasoline)
1,090 lbs. (with tracks)
910 lbs (with tires)
Length:
81.4” (basic tractor)
Width:
32.5” (with tracks)
35” (with tires)
Height:
46”
Wheel Base: 34.2”
Tread width:
8.5" (tires)
Track width:
7"
Track contact length: 19"
Trencher
Trench Depth: 24”
Trench Width: 4”
Zero-turn steering
RTX100 features our
exclusive VZ steering system,
which makes steering a
breeze - even in the tightest
of turns. With the RTX100,
users can maneuver easily
into confined jobsites and
even counter rotate from a
stationary position.
VZ steering system
This new system lets operators steer
with minimal effort, simply by applying
light pressure to the directional control
bar. The VZ steering system eliminates
the need for additional levers and
steering wheels, helping reduce
training time. The directional control
bar also provides an additional
leverage point in difficult conditions.
Rubber-track option
The RTX100 is available
with 7" rubber tracks,
which allows crosstrenching. With tracks or
tires the unit is less than
35" wide.
3 Convenient Locations to Serve You! Call for Reservations.
Colorado Springs……………….719-382-1947
Commerce City / Denver……… 800-525-0477
Grand Junction………………….970-244-9177
2
RT200
RT200 Specifications
General
Horsepower:
Weight:
Length:
Width:
Height:
23 (gasoline)
1,485 lbs.
79”
36”
44”
62” (transport with boom up)
Wheel Base: 46”
Tread Width: 27.5”
Steerable Drive Wheels
Trencher
Trench Depth: 36”
Trench Width: 6”
Powerful Hydrostatic
Trenching in a
Compact Package.
Maintenance time and
cost is reduced
through the use of a fully
hydrostatic trencherdrive
that eliminates all belts,
pulleys and gears.
Hydrostatic grounddrive and twin wheel
motors eliminate the need
for locking differentials
while maintaining
maneuverability.
Powerful, 23 HP engine
combines durable and
reliable operation with high
horsepower for impressive
job site results.
Grand Junction………………….970-244-9177
3
RT450
General
Horsepower:
Weight:
Length:
Width:
Height:
Wheel Base:
Tread Width:
50 (diesel)
6,740 lbs. (with backhoe)
97” (tractor & backfill blade)
58”
85” (with roll bar)
46”
46.5”
Trencher
Trench Depth: 48”
Trench Width: 6”
Sliding Offset
Offset Left:
0”
Offset Right: 24”
Optional Attachments*
Backhoe
Bucket Width:
Max Dig Depth:
Swing Arc:
Reach:
12”
77”
170 degrees
117”
*Not all units are equipped with the optional
attachments listed above. Please specify your
requirements when placing your reservation.
A Winning
Combination of
Convenience and
Performance
Readily accessible
Color coded grouped
controls, positioned to the
right side of the operator
station, contribute to ease
of operation and boosting
productivity.
Go where the work is!
The backhoe attachment
allows you to dig dirt and
other materials efficiently.
Raising the standards
Radial piston trencher
drive motor provides
reliability and
performance.
Trench where you need
Sliding offset trencher allows
you to offset the boom for
effective trenching along
foundations, fences, curbs,
roads, and other common
obstacles.
Grand Junction………………….970-244-9177
4
RT650
General
Horsepower:
Weight:
Length:
Width:
Height:
Wheel Base:
Tread Width:
76 (diesel)
6.600 lbs. (tractor & backfill blade)
69”
58”
53.5”
Trencher
Trench Depth: 60”
Trench Width: 7”
Backhoe
Bucket Width:
Max Dig Depth:
Swing Arc:
Reach:
18”
96”
180 degrees
159”
Packaging Big Power
in a Compact Utility
Machine.
Smooth operation
Operator’s station rotates
90 degrees allowing the
operator to select five
different positions. The
attachment controls
rotate with the operator.
Freedom to move
The RT650’s tight turning
radius, with steerable rear
planetary axle, provides
excellent maneuverability
in confined work areas.
Grand Junction………………….970-244-9177
5
RTX750
60” Deep x 7 Wide Trench
RTX750 Specifications
General
Horsepower:
Weight:
Length:
Width:
Height:
Wheel Base:
Tread Width:
75 (diesel)
72”
100.25” (with roll bar)
61”
56”
Trencher
Trench Depth: 60”
Trench Width: 7”
Backhoe
Bucket Width:
Max Dig Depth:
Swing Arc:
Reach:
18”
96.8”
170 degrees
151.1”
A Winning Combination
of Convenience and
Performance
Integrated system display
toggles through engine rpm,
fuel, battery voltage, &
more. The display also
indicates the % of the
hydrostatic capacity being
utilized.
The backhoe
attachment allows you
to dig dirt and other
materials efficiently.
Turning in tight spaces!
When equipped with tires
and rear steer, the RT750
has an outside turning
radius of only 16.8 feet ,
which is ideal on confined
Rotating operator’s
station and all
attachment controls
manually rotate 90
degrees for improved
operator visibility of the
rear attachment and
enhanced operator
comfort.
jobsites.
Grand Junction………………….970-244-9177
6
RT950
General
Horsepower:
Weight:
Length:
Width:
Height:
Wheel Base:
Tread Width:
99 (diesel)
12,700 lbs. (tractor & backfill blade)
149.5” (tractor & backfill blade)
86”
76”
68”
Trencher
Trench Depth: 60”
Trench Width: 8”
Backhoe
Bucket Width:
Max Dig Depth:
Swing Arc:
Reach:
18”
108”
180 degrees
158”
An innovative solution
from the legendary line
of Vermeer trenchers.
Standard rear-steering
axles include rear-steer
and coordinated steer to
handle a variety of worksite conditions
Free your hands!
Exclusive Vermeer
ground-drive foot
pedal with patented
creep override
controls forward,
reverse and speed
without manual
shifting, freeing your
hands to control
working attachments..
Be more productive
The 950 is specially
designed around the
needs of the operator,
resulting in more
productive hours on
the job.
Grand Junction………………….970-244-9177
7
RT1250
General
Horsepower:
Weight:
Length:
Width:
Height:
Wheel Base:
120 (diesel)
149.5”
86”
108.5” (2-post)
76”
Trencher
Trench Depth: 72”
Trench Width: 10”
Backhoe
Bucket Width:
Max Dig Depth:
Swing Arc:
Reach:
18”
107”
180 degrees
159”
Packaging Big Power in
a Compact Utility
Machine.
Smooth operation.
Operator’s station rotates
90 degrees allowing the
operator to select five
different positions. The
attachment controls
rotate with the operator.
Freedom to move.
The RT650’s tight turning
radius, with steerable rear
planetary axle, provides
excellent maneuverability
in confined work areas.
Grand Junction………………….970-244-9177
8
T555
T555 Specifications
General
Horsepower:
Weight:
Length:
Width:
Height:
Wheel Base:
185 (diesel)
28,000 lbs. (approximately)
285”
99”
76”
Trencher
Trench Depth: 72”
Trench Width: 12”
No 185 hp trencher powers
through demanding jobs like
the Vermeer T555.
Electronic Control
Exclusive Vermeer system
integrates separate, stand-alone
components into a few simple
controls. Automatically adjusts
to varying conditions and
equalizes track speed of straight
tracking in both directions, in all
speed ranges. It also monitors
trenching operations and
displays useful data on a LCD
readout.
Conveyer
91” long and 24” wide
with a belt speed of up to
1000 fpm. Shifts left or
right for spoils discharge.
Tracks
Dual-path hydrostatic drive
with planetary transmission
capable of full counter
rotation.
Trencher
Hydrostatic. One pump
with one motor capable of
transmitting full engine
horsepower.
Auto-tilt Track
Utilizes an oscillating track
frame that allows the track
to follow the ground’s
contour, ensuring a vertical
trench on slopes up to 10
degrees.
Grand Junction………………….970-244-9177
9
LM42
LAWN PLOW / TRENCHER
8”-24” Plow Depth
LM42 Specifications
General
Horsepower:
Weight:
Length:
Width:
Height:
Wheel Base:
46 (diesel)
3,550 lbs. (tractor with plow)
74”
35.5”
52”
44.5”
Trencher
Trench Depth: 36”
Trench Width: 4”
Plow
Max blade depth: 24” (recommended)
Max chute depth: 18” (recommended)
Intelligent options for a
variety of functions
Compact Width and
Excellent Maneuverability
A great multipurpose
machine, the LM42
oscillates at the point of
articulation for increased
stability and performance on
uneven terrain. With its
extremely narrow profile, the
LM42 will fit through areas
as small as 36"
Safety and Convenience
Insulated, color-coded
controls help protect the
operator against shock
injury from electric strikes.
The separate, color-coded
controls for steering and
propulsion provide a
quick, visual reference.
Grand Junction………………….970-244-9177
10
TC-4a
TRENCH COMPACTOR
16,000 lbs of Shaker Force
TC-4a Specifications
General
Horsepower:
Shaker Force:
Weight:
Length:
Width:
Height:
Wheel Base:
20
16,000 lbs.
2,960 lbs.
99.7”
57”
62.3”
58”
Tamper Wheel
Size:
42" diameter,
Width:
2"
Depth:
0 – 26"
More Compaction Where
You Need It, Less Where
You Don’t
Half the weight
At less than 3,000 lbs
the TC-4a weighs in as
the industry’s lightest
compactor. Plus, its
distinctive, compact
design makes cutting
through narrow fence
openings and
maneuvering in tight
working conditions a
breeze.
Shaker Force
The TC4A pounds out
16,000 lbs. worth of
shaker force thanks to a
unique dry shaker box
design that transfers force
directly to the ground!
Tilt Frame
Adjusts to inclinations up
to 10 degrees inside the
frame, which allows the
TC-4A to remain true to
vertical trenches dug in by
tilt trenchers.
Narrow, Lightweight Design
The TC-4a’s narrow, 57"
width is ideal for jobs that
ask you to squeeze through
restricting entrances. And
because there are fewer
than 3000 lbs. to pull
around, you won’t have to
sidestep around delicate
landscaping, either.
Grand Junction………………….970-244-9177
11
BC600XL
BRUSH CHIPPER
6” Capacity
BC600XL
Specifications
General
Horsepower:
Weight:
Length:
Width:
Height:
27 (gasoline)
1,900 lbs.
110”
53.5”
94”
Cutting System
Disc Size: 24” dia. x 1.25” width
Knives: Two 5/8" x 3.5" x 8"
Bedknife: 4-edge, 3/4" x 5" x 6.6" A8 steel
Feed/Discharge System
InfeedOpening: 6” x 6”
Feed table length: 64”
Feed table height: 30”
Feed Roller Style: One Horizontal, 8”dia.
Infeed Rate: 0 - 230 fpm
Discharge Height: 94”
Rotation: 240 deg.
Compact and Feature
Packed, Ready to
Produce Results.
AutoFeed System
Enhances ease-of use
and efficiency by
automatically monitoring
engine rpm and
controlling the feed roller
accordingly to maximize
efficiency while reducing
engine stress, increasing
ease of operation, and
reducing material jams.
Built-in safety features
A 64" long feed table is part
of the safety distance
guarding concept. In
addition, all units feature the
innovative Bottom Feed Stop
Bar designed to make it
possible for the operator’s
leg to strike the bar and stop
the feed either intentionally
or automatically in an
emergency situation.
Smooth Towing
The standard 2000 lb
torsion axle with
independent rubbercushioned wheel
movement reduces the
transfer of road shock to
the machine.
27 hp gas engine
The BC600XL is
equipped with a Kohler
Command Pro 27 unit,
providing 27 hp to
process materials up to
6" diameter.
Grand Junction………………….970-244-9177
12
BC1000XL
BRUSH CHIPPER
12” Capacity
BC1000XL
Specifications
General
Horsepower:
Weight:
Length:
Width:
Height:
85 (diesel)
4,760 lbs.
150” (feed table up, tongue in)
66.5”
101”
Cutting System
Drum Size: 21” dia. x 20” width
Knives: Two
Feed Roller Style: One Horizontal
Rotation: 270 deg.
SmartFeed system
The feed-sensing
control system monitors
engine rpm and
automatically stops or
reverses the rollers
when feeding larger,
hardwood material.
Plus, it senses feedroller jams and
responds by
automatically shifting
material back and forth,
reducing the need for
manually manipulating
the control bar.
Large Opening
A large rectangular 12" x
17" feed opening helps
boost productivity by
reducing the need to trim
material before feeding it
into the chipper.
.
Clutchless PTO system
allows the cutter to be
engaged without using a
traditional slip clutch or
idler pulley and without
sliding the engine. The
system is simple to
maintain — once under
the shield, belt changes
are easily accomplished
without the use of tools.
.
Improved operator safety
Combined with the patented
Bottom Feed Stop Bar is the
four-position upper-feed
control bar with dual stop
positions and forward /
reverse feed positions.
Mounted over the feed table,
it enables the operator to
stop the feed rollers and
select forward or reverse
operations. Dual reset / holdto-run buttons allow the
operator to readily reset the
Bottom Feed Stop Bar.
Grand Junction………………….970-244-9177
13
BC1500
BRUSH CHIPPER
15” Capacity
BC1500
Specifications
General
Horsepower:
Weight:
Length:
Width:
Height:
125 (diesel)
6,907 lbs.
179” (transport)
86”
104”
Cutting System
Drum Size: 22.5” dia. x 22” width
Knives: Two
Feed Roller Style: Twin Vertical
Rotation: 270 deg.
Strength for Today’s
Demanding Jobsites
Improved Productivity
The SmartFeed system
monitors engine rpm and
automatically stops and /
or reverses the feed
rollers to enhance
production. This system
also senses feed-roller
jams and manipulates the
material automatically to
reduce the need for
manual control bar use.
Smooth Feeding
Vertical feed rollers with
helical cleats help hold
material firmly to the
infeed table which
reduces vibration, shock,
and structural loading to
the rear of the machine.
Operator Safety
Combined with the patented
Bottom Feed Stop Bar is a
four-position upper-feed
positions and forward /
Mounted over the feed table,
this enables the operator to
stop the feed rollers and
select forward or reverse
operations. Dual reset / holdto-run buttons allow the
operator to readily reset the
Bottom Feed Stop Bar.
Grand Junction………………….970-244-9177
14
BC1800XL
BRUSH CHIPPER
19” Capacity
BC1800XL
Specifications
General
Horsepower:
Weight:
Length:
Width:
Height:
170 (diesel)
8,740 lbs.
177.6”
79.9”
123.6”
Cutting System
Drum Size: 36” diameter
Knives: Four
Feed table length: 62.5”
Feed table height: 30.5”
Rotation: 270 deg.
Strength for Today’s
Demanding Jobsites
rollers to enhance
reduce the need for
Smooth Feeding
Vertical feed rollers with
helical cleats help hold
material firmly to the
infeed table which
reduces vibration, shock,
and structural loading to
the rear of the machine.
Operator Safety
Combined with the
patented Bottom Feed
Stop Bar is a fourposition upper-feed
and forward / reverse
feed positions. Mounted
over the feed table, this
control enables the
operator to stop the feed
rollers and select forward
or reverse operations.
Dual reset / hold- to-run
buttons allow the
operator to readily reset
both bars.
.
Grand Junction………………….970-244-9177
15
BC2100XL
BRUSH CHIPPER
21” Capacity
BC2100XL
Specifications
General
Horsepower:
Weight:
Length:
Width:
Height:
275 (diesel)
16,380 lbs.
259” (operational/ tongue extended)
95.8”
116.5”
Cutting System
Drum Size: 21.5” x 28” opening
Knives: Four
Feed table length: 60.5”
Feed table width: 72”
Discharge Height: 116.5”
Rotation: 270 deg.
Winch
Eliminates the need to
drag large material to the
chipper. The 150' winch
line can handle material
up to 4000 lb, making it
easy to lift logs directly
onto the feed table. In
addition the winch can
also be hydraulically
raised out of the way to
allow operators to feed
the unit using a loader.
rollers to enhance
reduce the need for
Operator Safety
Combined with the
patented Bottom Feed Stop
Bar is a four-position
upper-feed control bar with
dual stop and forward /
Mounted over the feed
table, this control enables
the operator to stop the
feed rollers and select
forward or reverse.
SmartCrush
Once the upper feed roller
raises for four seconds, it
will automatically increase
down pressure on the
material being fed. This
allows the upper feed
roller to easily climb onto
large forked material
before the increased down
pressure is applied for
maximum pulling force.
Hydraulic outriggers
Support the back of the
chipper and prevent the
unit from bouncing while
chipping or loading largediameter material onto the
feed table.
Grand Junction………………….970-244-9177
16
SC252
STUMP CUTTER
SC252
Specifications
General
Horsepower:
Weight:
Length:
Width:
Height:
27 (diesel)
1,060 lbs.
115” (with cutter guard)
35” (with cutter guard)
53”
Cutting Dimensions
Above ground: 25”
Below ground 13”
Width
39” (straight line)
Cutter Wheel Drive Train
Tooth style: Yellow Jacket Cutter System
Number of teeth: 16
Industry-leading
features
A narrow width of 35"
Allows entry through most
standard gates.
Additionally the SC252
is able to maneuver in
tight work areas.
AutoSweep
Cutter wheel swing speed
automatically adjusts during
operation, helping to reduce
engine and drivetrain stress.
Uncluttered controls
Provides a faster
learning curve for users
and reduces distractions
during operation of the
machine. The hydraulic
controls are engineered
to produce maximum
production results.
Safety
Exclusive safety features
such as the patented
cutter wheel guard and
operator presence
system with sensors
integrated into the
control handles.
Grand Junction………………….970-244-9177
17
SC352
STUMP CUTTER
SC352
Specifications
General
Horsepower:
Weight:
Length:
Width:
Height:
34 (diesel)
2,150 lbs.
123.6”
34.8”
65”
Cutting Dimensions
Above ground: 22”
Below ground: 14”
Width:
Tooth style:
Yellow Jacket Cutter System
# of teeth:
20
An Uncommon Amount
of Common Sense
A narrow width of 35"
Allows entry through most
standard gates.
Additionally the SC352
is able to maneuver in
tight work areas.
AutoSweep
automatically adjusts during
operation, helping to reduce
engine and drivetrain stress.
Uncluttered controls
Provides a faster
during operation of the
machine. The hydraulic
controls are engineered
to produce maximum
production results.
Safety
operator presence
system with sensors
integrated into the
control handles.
Grand Junction………………….970-244-9177
18
SC1152
STUMP CUTTER
SC1152
Specifications
General
Horsepower:
Weight:
Length:
Width:
Height:
110 (diesel)
4,200 lbs.
147” (boom/blade up position)
35” (56” with dual tires)
76.5”
Cutting Dimensions
Above ground: 21”
Below ground: 25”
Width:
Tooth style:
Yellow Jacket Cutter System
# of teeth:
30
High Performance in a
Sleek Machine
Fits Through a 36” Gate
Compact enough to fit
through a 36" gate, but
still provides 110
horsepower for large jobs.
Chip Blade & 4WD
Front-mounted chip blade
moves chips around the
jobsite easily. A differential
lock on the 4WD system
can be disengaged for
tight turning and engaged
for tough site conditions.
AutoSweep
automatically adjusts
during operation, helping
to reduce engine and
drivetrain stress.
Uncluttered Controls
Provides a faster
during operation. The
hydraulic controls are
engineered to produce
maximum production
results.
Safety
operator presence
system with sensors
integrated into the
control handles.
Grand Junction………………….970-244-9177
19
HG200
HORIZONTAL GRINDER
HG200
Specifications
General
Horsepower:
Weight:
Length:
Width:
Height:
85 (diesel)
5,540 lbs.
19’ 8” (transport)
66” (transport)
81.6 (transport)
Hammermill
Drum diameter:
Rotor cutting length:
Drum speed:
Number of hammers:
Number of screens:
22.3”
16.5”
1050 rpm
10
2
Infeed System
Feed roller diameter:
Feed throat height:
Feed table width:
Feed table length:
Conveyor speed:
Feed table load Height:
20"
12.5"
15"
6'
0 – 47 fpm
40"
Discharge
Conveyor type:
Conveyor belt width:
Conveyor belt speed:
Conveyor length:
Discharge height:
Folding side discharge
18"
Variable up to 700 fpm
91"
5.5'
Turn waste into
marketable mulch.
The hammermill drum
produces uniform-sized
mulch by processing
wood chips through
screens, with a range
of sizes and openings.
Increase grinding
productivity.
The patented Vermeer
SmartFeed system
monitors engine rpm
rates and automatically
stops and / or reverses
the feed roller and feed
conveyor to help
enhance production..
Save time with oneperson screen change.
Operators can load
screens by hand without
the use of additional
support equipment or
personnel.
Enhance efficiency.
The unit’s side-discharge
conveyor belt allows
operators to load
processed material into
dumpsters or pickup
trucks, or to create
windrows of processed
material.
Grand Junction………………….970-244-9177
20
HG4000TX
HORIZONTAL GRINDER
HG4000TX
Specifications
General
Horsepower:
Weight:
Length:
Width:
Height:
440 (diesel)
56,000 lbs.
446.4”
98.4”
139.2”
Hammermill
Drum diameter:
Drum cutting length:
Drum speed:
Number of hammers:
Number of cutters:
Number of screens:
22.5”
51.2"
1050 rpm
8
16
30
Infeed System
Feed roller length:
Feed roller raise height:
Feed throat height:
Feed table width:
Feed table length:
Hopper load height:
28"
47.5"
38"
25.75"
50"
14'
7.8'
Discharge
Conveyor belt length:
Loadout conveyor length:
Discharge height:
48"
52.5'
12.2'
9.8'
Patented Smart Grind
An advanced control
system constantly
material feed rates. If
difficult material causes
engine rpm to drop
below an efficient
operating range, the
system stops and
reverses material until
rpm is restored.
Centralized control station
provides real time
performance information
and full instrumentation.
The control panel is also
equipped with diagnostic
ports for monitoring systems
and troubleshooting.
Thrown Object Deflector
reduces the quantity and
distance of thrown
material debris.
Additionally, the it is
strategically positioned to
reduce interference
when loading over-length
material.
Patented Duplex Drum
cutting system offers
optimum cutting performance
with full surface coverage of
the material. In addition, it
offers the latest technology
in hammer design in the
industry. Plus, hammers and
cutter blocks are reversible,
therefore nearly doubling
hammer life.
Easy access screens
are engineered with toploading design to allow
the operator to change
screens more easily, and
in less time than
conventional side loading
screens. A variety of
screen sizes are
available to meet specific
project needs.
Grand Junction………………….970-244-9177
21
HG6000TX
HORIZONTAL GRINDER
HG6000TX
Specifications
General
Horsepower:
Weight:
Length:
Width:
Height:
630 (diesel)
67,000 lbs.
41’ (transport)
100”
11.5’
Hammermill
Rotor diameter:
Rotor cutting length:
Rotor speed:
Number of hammers:
Number of cutters:
37”
62"
1050 rpm
10
20
Infeed System
Feed roller width:
Feed roller raise height:
Feed throat height:
Feed table width:
Feed table length:
Hopper load height:
36"
60"
44"
32"
60"
14'
88”
Discharge
48"
Loadout conveyor length: 14’
Discharge height:
11.3’
Patented SmartGrind
system and hydraulic
feed roller down
pressure keep material
moving so that loading
speed and productivity
are maximized. Openended, wide feed tables
are designed to make
over-the-side loading
easy and efficient.
Centralized control station
provides real time
performance information
and full instrumentation.
The control panel is also
equipped with diagnostic
ports for monitoring systems
and troubleshooting.
Thrown Object Deflector
reduces the quantity and
distance of thrown
material debris.
Additionally, it is
strategically positioned to
reduce interference
when loading over-length
material.
Patented Duplex Drum
cutting system offers
optimum cutting performance
with full surface coverage of
the material. In addition, it
offers the latest technology
in hammer design in the
industry. Plus, hammers and
cutter blocks are reversible,
therefore nearly doubling
hammer life.
Easy access screens
are engineered with toploading design to allow
the operator to change
screens more easily, and
in less time than
conventional side loading
screens. A variety of
screen sizes are
available to meet specific
project needs.
Grand Junction………………….970-244-9177
22
VACUUM
EXCAVATORS
VL55 Specifications
General
Horsepower:
Weight::
Length:
Width:
Height:
Spoils Tank:
Water Tank:
Suction Hose:
31
9,990 lbs (< 1,000 lbs tongue weight)
188”
80”
78”
550 gal.
200 gal.
33’
V500 Specifications
General
Horsepower:
Weight::
Length:
Width:
Height:
Spoils Tank:
Water Tank:
Suction Hose:
49
9,999 lbs
195”
91”
90”
500 gal.
250 gal.
40’
V250 Specifications
General
Horsepower:
Weight::
Length:
Width:
Height:
Spoils Tank:
Water Tank:
Suction Hose:
25
7,000 lbs
145”
91”
87”
250 gal.
100 gal.
33’
Grand Junction………………….970-244-9177
23
S600TX
MINI SKID STEER
S600TX
Specifications
General
Horsepower:
Weight:
Length:
Width:
Fuel capacity:
Travel speed:
25 (diesel)
2660 lbs. (without bucket)
93”
36” (without bucket)
15 gal.
4.5 mph
Attachments
Thanks to our wide range of attachments,
Vermeer mini skid steers can be used in
a multitude of applications. With universal
mounting plates, it’s easy to hook up a
tool and get right back on the job.
Universal
mounting plate
makes it easier for the
operator to hook up
various attachments.
Two ergonomically
designed joysticks
Transport and boom
bucket motion are
controlled by two joysticks
and the handgrip is
positioned to help
improve operator balance
while on uneven terrain.
Spring-cushioned
platform
keeps the operator out of
mud and debris. At 14.5"
it is high enough to
enhance visibility while
providing clearance for
backing over curbs.
Curved loader arms
lift up and away from
the machine,
providing better
height and reach for
loading and
unloading.
Single joystick
ground drive
Ground drive is
controlled by a single
joystick, giving the
operator a smooth
range of motion.
Increased Comfort
Cushions are positioned
in front and on either
side of the operator,
increasing comfort and
decreasing the chance of
injury when driving over
uneven terrain.
Grand Junction………………….970-244-9177
24
S600TX
Attachments
Land Leveler
49" wide
170 lbs.
Auger Accessories
12"
36"
Trencher
4 " wide
30" deep
Forks
30" adjustable width
32" long
162 lbs.
Tiller
51" wide
4.5" deep
256 lb
Bucket with teeth
4 cu ft
42" wide
182 lbs.
Brush Grapple
36" wide, 225 lb
42" wide, 245 lb
Grand Junction………………….970-244-9177
25
TS44a
TREE SPADE
TS44a
Specifications
General
Horsepower: 18 (gasoline)
Weight:
6,563 lbs.
Width:
92”
Height:
121”
Trailer Mounted
Capabilities
Ball diameter: 44”
Ball depth:
40”
Tree ball weight: 1,173 lbs.
Truck diameter: 4” (recommended)
Dig, Lift, and Transport
Trees in Less Time
Trailer Mounted Unit
Save time and effort, just
hook up and tow to the
desired location.
Uncluttered Controls
Simple and easy to use
controls make using the
TS-44a a breeze.
Grand Junction………………….970-244-9177
26
Moles
PNEUMATIC PIERCING TOOLS
2, 2.5, 3, 4, & 5.5* INCH
Piercing Tool
Specifications
General
PSI: 110
2” Mole
Length: 39
Weight: 24 lbs.
2.5” Mole
Length: 48.25
Weight: 50 lbs.
3” Mole
Length: 52.18
Weight: 67 lbs.
4” Mole
Length: 63.95
Weight: 136 lbs.
5.5” Expander
Used with 4” mole
TOUGH & TRUSTED
HammerHead Mole® pneumatic piercing tools create a compact hole for almost any underground installation with
minimal disruption to landscapes, buildings or normal traffic flow. The process is preferred by many contractors
because of its low cost per foot of installation, reasonable equipment investment and minimal expertise required for
equipment operation.
Whether you’re boring a hole under a sidewalk to install coaxial cable, or under a highway to get natural gas service
from the main to a new customer, our pneumatic piercing tools deliver the productivity and reliability needed to keep
you on the job.
Grand Junction………………….970-244-9177
27
521 Wildcat
TROMMEL SCREEN
521 Wildcat
Specifications
General
Horsepower:
Weight:
Hitch weight:
Length:
Height:
Width:
Capacity
Production:
Hopper:
99 (diesel)
39,700 lb.
13,400 lb
46.1' (transport) / 84.4’ (operation)
13.4' (transport) / 15.9’ (operation)
102"
Up to 150 cu yd per hr with .5"
screens installed and material
with moisture less than 40%
5 cu yd
Designed for the organic and woodwaste industries, this self-contained portable screening
plant is ready to take on composting, recycling or topsoil reclamation.
Large opening
A wide and tall
throat opening
between the
hopper and drum
helps minimize
material bridging.
Impact idlers
are standard on
all units. Closely
spaced and
rugged, the
hopper design is
one of the
strongest in the
industry.
Minimal spillage
Flashing and
shielding fit
tightly against
the drum and
conveyor,
keeping material
spillage to a
minimum.
Drum access
Side panels are
removable along
each side to
expose the full
length of the drum
screens, providing
easy access for
maintenance and
cleaning from
ground level.
Tensioned
screens help
add strength to
the drum panels
allowing for a
smaller diameter
screen wire and
an increased
screening area.
Grizzly
(optional)
The grizzly is
used to remove
large material
from entering the
hopper and tips
hydraulically with
a handheld
remote control.
Grand Junction………………….970-244-9177
28

Rental Equipment Quick Reference

Transcription

Similar documents

Dukono - Carlyle Collective

Two New Benchtop Planers

Elm Park Red Futures Sale Spring 2010.indd

Agrisupply industry challenges

Horseman`s Edge Senior Flyer

Titan™ ASE Thermo Mark HL300

EB-3500 Wire Closer

TAC Woodsman 770 Brush Chipper Specifications

SYC-300M - Leadermac USA