docChimpz Caracas Multigym Instructions
download 
Report Transcription
Chimpz Caracas Multigym Instructions
Please read all the instructions before assembly Page 1 Chimpz Caracas Multigym Instructions B1 B1 B8 B8 B1 65mm 65mm M8 M8 bolt bolt set set xx 3 3 B2 B2 B1 B1 65mm M8 bolt set x 3 B3 B3 B1 B1 B1 B9 Model No. 1323 B2 B8 B9 62mm set x 4 62mm M6 M6 bolt bolt B8 B8 set x 4 37mm M6 bolt set x 2 B8 M8 bolt B9 65mm set x3 65mm M8 set 65mm M8 bolt bolt62mm set xxM63 3 bolt set x 4 UB1 55mm M6 bolt set x 4 bolt set UB1 Safety Notes: 51mm M6 x 2 65mm M8 bolt set x 3 51mm M6 bolt set x 2 37mm M6 bolt set x 2B3 B2 • For family domesticB2 B2 B2use only. For outdoor use. B3 B2 B9 55mm set x 4 55mm M6 M6 bolt bolt B1 B1 set x 4 B8 37mm M6 bolt set xx 2 37mm boltbolt set set 2 x3 65mmM6M8 B2 UB1 B4• Product 51mm M6 bolt suitable set x 2 for children aged 3 to 10 years. B8 B8 55mm M6 bolt set x 4 B1B9 B9 B9 B9 37mm M6 bolt set xx 2 37mm 37mm M6 M6 bolt bolt set set x 2 2 UB1 51mm M6B8bolt set xM6 2 bolt 65mm 62mm set 62mmM8 M6bolt boltset setx xx3 4 4 B4• Check all nuts andB1 B9 M6and bolt set when x 4 required. bolts 55mm for tightness tighten 55mm M6 set x4 55mm M6 bolt bolt set 4 62mm M6 bolt set x 4 • Check all coverings for set bolts edges andxreplace when required. 47mm M8 bolt xand 2 sharp B8 M8 bolt set M8 x 2 bolt set x 2 47mm 55mm M6 bolt set x 47mm 4 • Check 62mm M6xbolt set x 4 for evidence of deterioration. B3 B2 swings seats, ropesM8 and otherset means 65mm bolt 3of attachments 37mm M6 bolt set x 2 B3chains, B4 B1 B4 B3 B8 a level surface at least 2 metres from anyxstructure or obstruction such as a fence, garage, house, overhanging B5• Place the swing onB3 UB1 65mm M8 bolt set x 334mm 37mm M6 bolt set 2 UB1 B5 M8 bolt set x 8 62mm UB1 51mm M6 bolt set xM62 U-bolt set x 4 55mm M6 bolt set x 4 branches, laundry line electrical wires. B2 orM8 B9 M6 UB1 B13 set x 2 51mm M6 bolt 65mm bolt set x 37mm bolt 47mm M8 bolt set set x 2xB82 62mm M6 U-bolt 51mm M6 set x 2 B6 34mm M8 bolt set xxB9 8 • This item MUST be anchored firmly intobolt the ground. UB1 62mm M6 U-bolt set set xx 4 4 B2 34mm M8 bolt set 8 51mm M6 bolt set x 82mm 2 • DO B4 B3 install swing55mm over concrete, asphalt or other hard surface. M8NOT bolt set x 2 theB4 M6 bolt set x any 4 M8 62mm M6 bolt set x 4 M6 bolt set x 2 65mm bolt set x 3 B9 37mm B4 B2 B4 tight until assembly is complete (for ease ofB5 B6• Leave all fittings finger B7 62mm M6 bolt set x 4 construction) - then tighten firmly . Always supervise young children at B4 55mm M6 bolt set x 4 B6play, until they are physically 51mm M6 bolt set x 2 competent and confident. Children should not wear cycle helmets whilst on this equipment. 47mm M8 bolt set x 2 B3 M6 42mm M6 bolt set x55mm 2 47mm M8 2 B24 set bolt set xbolt 62mm M6 bolt set xB94 47mm M8 bolt set xxweighing 2 82mm M8 bolt set 2 • This item is not forxadults or for children more than 4534mm kg (7 stone). M8 bolt set x 8 M8designed bolt set x 2 B3 UB1 47mm M8 bolt set x 2 • The82mm B5 B4 total weight onB5 the playgym atM6 any bolt one time must 145kg (22 3/4 stone). B5 51mm set x 50 2 not 0 20 30 40 60 70 x 4 80 90cm 55mm M6exceed bolt set 62mm M6 bolt set x 4 Not suitable for children under 3 years, contains small parts. B7 B3allow B510 to stand UB1on the • DO NOT children swing or glider seats. B6 The flat swing seat does not have a back orM6 seatbolt belt. set x 2 B7 62mm M6 U-bolt B5 51mm 34mm M8 bolt set x 8 47mm M8 bolt set xset 2x • DO NOT allow children to34mm get off the swings or glider when they are still moving. UB1 62mm M6 U-bolt set x4 4 B4 M8 bolt set x 8 62mm M6 U-bolt set x 4 B3 Young children may not be competent to balance themselves. 51mm M6 bolt set xbolt 2overset 34mm M8 8bar. M6 bolt set xx wrap 2 • DO42mm NOT twist swing ropes or them the x top M6 bolt set 2 62mm M6 U-bolt set x 4 B4 This equipment must be assembled and checked by anset adult. 34mm M8 bolt x 8 • DO42mm B6 baggy (or hooded) clothes to be worn, since children B5 bolt B6 82mm M8 set 2 UB1 to free themselves. NOT allow loose, can get trapped and may bexunable B6 47mm M8 bolt set x 2 51mm M6 bolt set x 2 Please retain complete instructions for future reference. B4 B6 • DO NOT allow children to climb on parts of this equipment not intended for this purpose. B6 47mm M8 bolt set x 2 82mm M8 bolt set x2 34mm M8 bolt set x 8 • DO NOT allow other to wander into the play2area when the is in 50 use. B5children 82mm M8 bolt set B7equipment 0 10 30 40 60 70 80 90cm B4 47mm M8 bolt 2 set xx20 82mm M8anxbolt 2 Failure to assemble this item as per the instruction may 0 set 10 20degrees 30 the ground. 40 50 60 70 80 90cm • Gliders and swings must not exceed angle of 60 from B5 82mm M8 bolt set x 2 B7 B6 B7item34mm 62mm M6 U-bolt setfitted. x4 cause injury to the user. Please keep these instruction in a • Regularly check the for wear M8 and damage, removing the item from use when necessary until replacement parts are B7 bolt set x 8 47mm M8 bolt set x 2 B5 B7 42mm M6 bolt set x 2 safe place for future reference. use only and hasM6 not U-bolt been designed 62mm set x for 4 commercial use in play centres, nurseries, etc. B7 34mm M8 bolt set x 8 • This product is for domestic 82mm M8 bolt set x 2 42mm M6 bolt set xx 2 • After assembly, theB6 single swing seat must be at least 350mm height from the floor. 42mm M6 bolt 2 Conforms to BS EN71 62mm M6 U-bolt set x 4 B58 set 34mm M8 bolt set x 42mm M6 bolt set x 2 • After assembly, the two swing seat must be at least 400mm height from the floor. B6 42mm M6 bolt set x 2 B8 • Always check crossbeams, suspensions, anchors for wear or damage afterB7 construction and before use62mm and replace damaged 82mm M8 bolt set xbefore 2 M8use M6 any U-bolt set x 4 34mm bolt set x 8 cause product B6 for these10 issues could to fall or break0 causing serious 10 injury.7020 80 30 90cm 0 20 30 40 50 60 82mm M8 bolt set x 2 parts to manufacturers specifications. Failure to check 42mm M6 bolt set x 2 0 or rust. 10 Replace20 20any damaged 30 parts before 40 use 50 50 70cause injury. 80 90cm • Regularly check forB7 seasonal damage due to weathering or product 60 may fail and 37mm M6 bolt set x 2 0 10 30 40 60 70 80 90cm 82mm M8 bolt set xB62 0 10 20 30 40 50 60 70 80 90cm B7 42mm M6 bolt set x 2 B9 82mm M8 bolt set x 2 B7 42mm M6 bolt set x 2 0 10 20 30 62mm M6 bolt set x 4 42mm M6 bolt set xB72 7 1 0 10 20 30 40 50 60 70 80 90cm 42mm xLower 2 glide legs x2 0 10 20 30 40 50 M660bolt set70 80 90cm Top bar x 1 UB1 0 10 20 30 40 50 60 70 80 90cm For safety reasons this gym MUST be anchored into the ground IMPORTANT : B5 B3 Parts List 8 2 0 Left hand top leg x 2 Please ensure that the slide when anchored, is positioned away from the main frame. B9 62mm M6 bolt set x 4 3 10 20 30 Glider seat tubes x 2 50 60 70 10 9 62mm M6 U-bolt set x 4 40 4 Right hand top leg x 2 4 4 Glider seat x 2 4 Glider bracket x1 4 B9 13 4 10 Bottom leg x 4 B1 Fix each of the ground anchors 13 to the bottom legs 4 and set into concrete. Make sure the legs of the gym remain above the concrete. 20 5 11 13 30 40 MPORTANT MPORTANT :: 50 60 16Glider footrest x 2 Fix each of the ground anchors 13 to the 70 4 legsBOLT 4 using bolt 65 bottom mm M8 (X2)set B9. 80 90cm For safety reasons this the ground B1 stay bar x2 ForSide safety reasons this gym gym MUST MUST be be anchored anchored into into 15 the ground B2 15 14 B1 W1 W2 M8 WASHER (X2) M8 WASHER (X4) ALLEN KEY (X1) ONCE ASSEMBLY IS COMPLETED...before allowing children to play on this product, carefully examine the equipment for any sharp edges and points. Do not allow children to use this product until the problem has been corrected. 6 12 Glider handlePlease barsensure x 2 that the 55 mm M6 BOLT (X4) 65mm M8 bolt set x 3 Please ensure that the slide when anchored, is B8 65mm M8 boltW3 set x 3 37mm M W4 Spanner x 3 Swing seat x 1 B8 Spanner B2 x 3 B9 SPANNER (X1) 37mm M6 bolt set x 2 M6 WASHER (X4) M6 WASHER (X8) M 55mm M6 bolt set x 4 62mm 16 For safety reasons this gym MUST be anchored into the ground IMPORTANT :: For this gym MUST into the IMPORTANT Plastic Bearing x 8be For safety safety reasons reasons this gym MUST be anchored anchored into the ground ground IMPORTANT : 13 B2 B9 Allen B3 key x1 For safety reasons this gym MUST be anchored into the ground Ground anchor x 4 2mm M6 bolt set x 4 Bolt 2mm M6 bolt setset x 4 list 55mm M6 bolt set x 4 62mmM6 M6 bolt setx x2 4 W1 W2 UB1 B1 51mm set For16 safety reasons thisbolt gym MUST be anchored into the g IMPORTANT : 65 mm M8 BOLT (X2) Fig.: 2 B8 B3B1 Take left hand ALLEN top leg and KEY2(X1) B4 For safety reasons this gym MUST be anchored into the ground IMPORTANT : IMPORTANT rightreasons hand top leg 3 UB1 and fit into 2 M8 WASHER (X2) M8 WASHER (X4) B9 B9 M6 bolt set x2 For safety this gym MUST : 51mm 35mm M6 boltgym set x 2MUST be anchored B9 For safety reasons this into the ground 43mmbolt M6 bolt setbe x 2 anchored into the gro 53mm M8 bolt set x completed 2 B9 top bar ensuring 4 into the ground IMPORTANT : set x 4For safety reasonsB4 this gym MUST beB1anchored 4 top 62mm M6 bolt B9 passes throughB5both the B2 62mm set W3 W4 B8 62mm M6 M6 bolt boltIMPORTANT set xx 4 4 For safety reasons this gym MUST be anchored into the ground : legs and top bar assembly. B9 4 15 47mm M8 bolt set x 2 62mm M 58mm M6 bolt set x 4 45mm M6 bolt set x 8 B2 4 slide when anchored, positioned away fromis positioned from the mainaway frame. the main frame. Please ensure that the Please ensure that Please ensure that the the slide when anchored, is slide when anchored, is Please ensure that the slide when anchored, positioned away positioned away from fromis slide when anchored, is positioned away from the main frame. the main mainaway frame. positioned from the frame. the main frame. Please ensure that the slide when anchored, is positioned away from the main frame. B9 B9 Please ensure that the slide when anchored, is positioned away from UB1 the main frame. 62mm M6 bolt setB9 x4 Please ensure that the 48mm M6 4 4 bolt set x 4 slide when anchored, is (See Fig.:441) Fig.: 1 62mm positioned away from (X4) B5mm 55 M6 BOLT M6 bolt set x 4 the B3main frame. Please ensure that the slide when anchored, 34mm is M8 bolt set x 8 B9 from positioned away B9 55mm M6 bolt setthat x the the main frame. Please ensure slide when anchored, is B6 13 positioned away from 13 4 B4 the main 4 frame. 1 Please ensure that the slide when anchored, is positioned away from the main frame. SPANNER (X1) 37mm M6 bolt set x 2 M6 WASHER (X4) Please ensure that the B6 B9 slide when anchored, is 62mm M6 U-bolt set x4 positioned away from 95mm M6 bolt set x 244 2 the main frame. 62mm M6 bolt set44 x 4 4 2 44 4 62mm M6 bolt set x 413 4 4 4 4 82mm M8 bolt set x2 4 and M6 bolt set 4 x2 4 13 Take left hand top leg UB1 240mm 4 4 4 4 B7 right hand top leg 3 and fit 4 into 4 4 B9 B9 top bar ensuring bolt B9 set x 2completed 4 42mm M6 bolt 4 0 B9 85mm M8 U-bolt set x 2 13 B9 passes through both the top 4 13 13 47mm M8 bolt setground x 2B1 anchors ach of the ground anchors 13 to the bottom legs 4 and set each of4 the 13 to the3 4 13 Fix ach of the ground anchors 13 to the bottom legs 4 and set Fix each of the ground anchors 13 to theassembly. legs and top bar 4 13 F1 4 concrete. Make sure the legs of the gym remain above the concrete. bottom legs13 4 using bolt set B9. B9 concrete. Make sure the 4legs of the gym remain above the concrete. B5 bottom legs13 4 using bolt set B9. 13 44 (See Fig.: 1) 4 13 4 Fig.: 1 4 13 Debut Sport Unit 2 Prospect House, Sheene Road,4Bristol BS3 4EG 62mm M6 bolt set xB94 W4 M6 WASHER (X8) 2 B7 10 1362mm M6 U-bolt set x 4 34mm M8B9bolt set x 8 4 4 Spareparts helpline: 0870 112 1928 examine Email: [email protected] ONCE allowing play on 4 carefully B9 4the ONCE ASSEMBLY ASSEMBLY IS IS COMPLETED...before COMPLETED...before allowing children children to toB6 playB1 on this this product, product, carefully examine the equipment equipment 13 for any sharp edges and points. Do not allow children to use this product until the problem has been corrected. keep all theuntil relevant information for future reference. B9 for any sharp edges and points. Do not allow childrenPlease to use this product the problem has been corrected. 1 13 ground Fix each the anchors 13 to the bottom legs 4 and Fix of the anchors 13 to Fix each of of the ground anchors 13 to the bottom legs 4 and set set Fix each each of the ground ground anchors 13 to the the Fix of ground anchors 13 to the bottom legs 4 set each of ground anchors 13 82mm M8 bolt13 set x 2Fix Fix each each of the theMake ground anchors 13of to thegym bottom legs 4 and and the set Fix each of the the ground anchors 13 to to the the into concrete. sure the legs the remain above concrete. bottom 4 using set B9. 13 4 bolt Product shown for illustration purposes only B9 legs concrete. Make sure the legs of the gym remain above the concrete. bottom legs 4 using bolt set B9. into concrete. Make sure the legs of the gym remain above the concrete. bottom legs 4 using bolt set B9. to the bottom into legs 4 and set Fix each of the ground anchors 13 to the 13 into concrete. Make sure the legs of the gym remain above the concrete. bottom legs 4 using bolt set B9 B9. of the gym remain above the concrete. bottom legs 4 using B7 bolt set B9.13 13 2 2 413 2 44 4 4 4 4 20 4 4 4 4 4 4 3 Fig.: 2 62mm 4M6 bolt set x 4 hored into the ground B2 4 4 5 4 30 2 440 Fix b asse W4 4 secu 4 stay 4 3 (See 4 Issue 1009/02 4 B2 Please read all the instructions before assembly Page 2 Assembly overview 1 9 B1 65mm M8 bolt set x 2 3 6 B2 6 55mm M6 bolt set x 3 5 4 4 7 B3 2 7 51mm M6 bolt set x 5 B4 47mm M8 bolt set x 12 8 10 4 B5 34mm M8 bolt set x 11 B6 82mm M8 bolt set x 4 B7 42mm M6 bolt set x 0 Assemble the main frame B1 16 53 mm M8 BOLT (X2) W1 W2 N1 M8 WASHER (X2) M8 WASHER (X4) M8 DOMENUT (X4) W3 W4 N2 M6 WASHER (X4) M6 WASHER (X8) M6 DOMENUT (X4) ALLEN KEY (X1) 15 B2 SPANNER (X3) 48 mm M6 BOLT (X4) Fig.: 2 Take left hand top leg 2 and right hand top leg 3 and fit into completed top bar ensuring bolt B1 passes through both the top legs and top bar assembly. (See Fig.: 1) Fig.: 1 2 5 B2 2 1 W4 W4 4 3 W3 N2 2 3 5 F1 B1 2 Product shown for illustration purposes only 4 Fix bottom leg 4 into assembled top legs and secure together using side stay bar 5 and B2 bolt. (See Fig.: 2) 4 Issue 1009/02 B1 4 Please read all the instructions before assembly 2 stay bar 5 and (See Fig.: 2) B2 bolt. Page 3 4 Assemble the glider B3 B4 55 mm M6 BOLT (X2) 43 mm M6 BOLT (X2) B5 N2 B6 45 mm M6 BOLT (X8) 95mm M6 BOLT (X2) B7 M6 DOMENUT (X18) B8 40mm M6 BOLT (X2) Fig.: 3 9 W4 W3 W4 M6 WASHER (X36) N2 9 6 Attach the upper glider supports 6 to both sides of the glider bracket 9 . using B4 bolt and washers and domenuts. (See Fig.: 3) 6 N2 W3 W4 Fix the lower glider supports 7 to the upper glider supports 6 using bolt B8 . (See Fig.: 4) B8 Insert plastic bearings 14 into glider handles 6 and slide between plates on glider bracket 9 . 14 M6 WASHER (X18) Fig.: 4 Fix glider bracket 9 onto top bar 1 and attach using B3 bolt and washers and domenuts. B3 W4 35mm M6 BOLT (X2) 9 1 W3 7 7 W4 B4 6 Fig.: 5 Fig.: 6 7 Fig.: 7 B5 7 7 10 B6 8 14 8 8 8 B7 11 Insert plastic bearings 14 into both sides ofthe glider tubes 8 and attach the glider seat support 8 to the lower glider support 7 using bolt B6 . (See Fig.: 6) Product shown for illustration purposes only 2) Fix the glider seat 10 to the glider seat support 8 using Bolt B5 . (See Fig.:7) 3) Attach the glider footrest 11 to the lower glider support 7 using bolt B7 . (See Fig.: 8) Issue 1009/02 . (See Fig.: 6) seat support 8 to the lower gliderallsupport 7 using bolt B6 Please read the instructions before assembly . (See Fig.: 6) the glider seat support 8 B2 using Bolt B5 . (See Fig.:7) to the lower glider support 7 B9 using bolt B7 . (See Fig.: 8) 55mm M6 bolt set x 4 Page 4 62mm M6 bolt set x 4 B3 UB1 51mm M6 bolt set x 2 Assemble the swing seat B4 47mm M8 bolt set x 2 B5 W1 UB1 M8 U BOLT (X2) UB1 N1 W2 34mm M8 bolt set x 8 B6 W1M8 WASHER (X4) N1 M8 WASHER (X8) W2 82mm M8 bolt set x 2 N3 set x 4 62mm M6 U-bolt N3 M8 PLAIN NUT (X2) M8 DOMENUT (X4) B7 M8 U BOLT (X4) N1 W1 W2 N1 W1 W2 W2 M8 WASHER (X4) M8 WASHER (X8) M8 DOMENUT (X8) 42mm M6 bolt set x 2 Fig.: 8 0 10 20 30 M8 PLAIN NUT (X8) 40 50 60 70 80 90cm Fig.: 8 N3 W2UB1 1 N3 UB1 Attach the swing seat 12 to the U bolt and fit to the assembled top bar 1 . (See Fig.: 8) Attach the swing seat 12 to the U bolt UB1 and fit to the assembled top bar 1 . (See Fig.: 8) 1 UB1 12 12 IMPORTANT : For safety reasons this gym MUST be anchored into the ground Please ensure that the slide when anchored, is positioned away from the main frame. B9 58mm M6 bolt set x 4 4 4 4 4 4 B9 13 4 13 Fix each of the ground anchors 13 to the bottom legs 4 and set into concrete. Make sure the legs of the gym remain above the concrete. Fix each of the ground anchors 13 to the bottom legs 4 using bolt set B9. ONCE ASSEMBLY IS COMPLETED...before allowing children to play on this product, carefully examine the equipment for any sharp edges and points. Do not allow children to use this product until the problem has been corrected. Debut Sport Unit 2 Prospect House, Sheene Road, Bristol BS3 4EG Spareparts helpline: 0870 112 1928 Email: [email protected] Please keep all the relevant information for future reference. Product shown for illustration purposes only Made in China Issue 1009/02
