Cv_en - Universitatea din Craiova

Transcription

Ionel Dănuț SAVU
Curriculum Vitae
PERSONAL INFORMATION
Ionel Dănuț SAVU
23, Griviței, Drobeta Turnu Severin, 220037, Romania
0040 352 416631
0040 723 684262
[email protected]
Sex M | Date of birth 17.09.1970 | Nationality Romanian
WORK EXPERIENCE
2009 – present
Associate Professor
University of Craiova
Academic and Research activity
Education
2010 – present
Project Manager
Romanian Welding Society (ASR)
Leading projects in LdV and ERASMUS+ programs
LLP projects
2010 – present
Lecturer
Romanian Welding Society (ASR)
Lecturer in courses related to welding and associated processes domain
Training
2012 – present
Welding Expert
Centre for Advanced Technologies and Failure Investigation srl Ilovita
Consulting and Technology Developer for Shipyard Kladovo, Serbia
Industry / Shipbuilding
2003 – 2009
Lecturer
University of Craiova
Academic and Research activity
Education
2003 – 2004
Design Engineer
Shipyard Orşova s.a., Orşova, Romania
Structure design and welding technology
© European Union, 2002-2015 | europass.cedefop.europa.eu
Page 1 / 19
Curriculum Vitae
Replace with First name(s) Surname(s)
Industry / Shipbuilding
2001 – 2003
Scientific Researcher
Universitaet der Bundeswehr, Hamburg, Deutschland
University of the Federal Armed Forces, Hamburg, Germany
Research activity
University Scientific Research
1996 – 2001, 2003 - 2012
Scientific Researcher (present Principal Scientific Researcher III)
NRDI for Welding and Material Testing (ISIM), Timişoara, Romania
Research, training, certification, qualification
Scientific Research
EDUCATION AND TRAINING
2016
VT Examiner
NRDI for Welding and Material Testing (ISIM), Timişoara, Romania
▪ Examination of welded joints and of the materials
▪ Level II
2005
Modelling and Packaging of MEMS
European Consortium Patent DfMM, Institute d’Electronique Fondamentale Paris-Sud,
Paris, France
▪ Microbonding processes
▪ MEMS technology
2000
European/International Welding Engineer
The International Institute of Welding and The European Welding Federation (EWF),
Brussels, Belgium
▪ Welding processes and welded structures
▪ Certification and Coordination
1998
High speed MIG/MAG welding
Messer – EWM High Tech Precision Schweisstechnick GmbH, Mundersbach, Germany
▪ MIG/MAG welding process
▪ Welding equipment
1996-1997
Master/Magister, specialization: Gas metal/tungsten arc welding
University “Politehnica” of Timişoara, România
▪ MIG/MAG and TIG welding processes
1990-1996
Engineer, specialization: Welding Equipment and Technology
University “Politehnica” of Timişoara, România
▪ Welding processes
▪ Welding structures
Page 2 / 19
Ionel Dănuț SAVU
Curriculum Vitae
PERSONAL SKILLS
Mother tongue(s)
Romanian
Other language(s)
UNDERSTANDING
Listening
SPEAKING
Reading
Spoken interaction
WRITING
Spoken production
English
C1
C1
C1
C1
C1
German
French
Serbian
A1
A1
A1
A1
A1
Communication skills
Organisational / managerial skills
Job-related skills
▪ Good communication skills in general language and in technical welding language
▪ Good communication in leading working groups
▪ Good communication in written messages
▪ Member of the I.M.S.T. Faculty Council, University of Craiova, 2008-2012
▪ Member of the I.M.S.T. Department Council, University of Craiova, 2012-2016
▪ Member of the Mechanics Faculty Council, University of Craiova, 2016-present
▪ Member of the Scientific Council of the NRDI for Welding and Material Testing (ISIM) 2004-2012
▪ Director, Centre for Advanced Technologies and Failure Investigation srl Ilovita, 2012-present
▪ Member of the Board of Director of the Romanian Welding Society (ASR) 2009-present
▪ Member of the Board of Director of the ASR Certpers srl 2014-present
▪ Member of the Board of Editors of “Sudura” Journal 2014-present
▪ Responsible with Scientific Research in I.M.S.T. Department 2012-2016
▪ Educational and organizational management
Digital competence
SELF-ASSESSMENT
Information
processing
Communication
Content
creation
Safety
Problem
solving
Independent
Proficient
Independent
Basic
Independent
Replace with name of ICT-certificate(s)
▪ good command of office suite (word processor, spread sheet, presentation software)
▪ good command of photo editing software
▪ e-mail software
Other skills
Driving licence
▪ writing novels
B
ADDITIONAL INFORMATION
Page 3 / 19
Curriculum Vitae
Publications
Presentations
Projects
Conferences
Seminars
Honours and awards
Memberships
References
Citations
Courses
Certifications
See annex
ANNEXES
Page 4 / 19
Ionel Dănuț SAVU
Curriculum Vitae
ANNEXES
Member of professional associations:
a. Romanian Welding Society (ASR)

Member since 1995

2007-2012: President of the Drobeta Tr.-Severin Branch of the ASR,

2012-present: Vice-President;

2009-present: Member of the Administration Council;

2014-present: member of the Board of Editors of the Journal Sudura

2014-present: member of the Board of Directors of the ASRCertpers srl of ASR.
b. Since 2007 I am founding member of S-E European Network for Tehnology Transfer in Welding (SEE-WELD)
c. Since 2003 – positions inside the International Institute of Welding (IIW/IIS):

DELEGATE for Romania at the Commission II Arc welding and filler metals of IIW/IIS;

EXPERT for Romania at the Commission XII Flux and gas shielded electrical welding processes of IIW/IIS.

Member of the Study Group SG212-Arc Physics of IIW/IIS
Projects coordinated as Project Manager
1. Contract no. Aditional Act no. 1716/05.11.1997/XI at contract no. 17/96, Theme B15 – Two wires GMA welding on steel and aluminum.
Research team:
Ing. Dănuţ SAVU - responsible
Ing. Corina JUNE
Ing. Ligius VOIN-OPRIŞOR
Ing. Remus BÎRLICĂ
2. Contract no. Aditional Act no. 32/05.02/98/I at contract no. 17/96, Theme A3 – Development of new high efficiency GMA welding technologies.
Research team:
Ing. Dănuţ SAVU (ISIM Timişoara) - responsible
Ing. Remus BÎRLICĂ (ISIM Timişoara)
Ing. Corina JUNE (ISIM Timişoara)
Dr. Ing. Andreas NENTWIG (SLV Munchen)
Dr. Ing. R. KNOCH (SLV Munchen)
Tehn. Ludwig BAUM (SLV Munchen)
3. Contract no. Aditional Act no. 1716/05.11.1997/XI at contract no. 17/96, Theme A3 – Development of new high efficiency GMA welding technologies.
Research team:
Ing. Corina JUNE (ISIM Timişoara)
Ing. Remus BÎRLICĂ (ISIM Timişoara)
S.l. ing. Stelian NEGOIŢESCU (UPT)
4. Contract no. Aditional Act no. 283/17.02.1999 at contract no. 17/96, Theme A3 – Development of new high efficiency GMA welding technologies.
Research team:
Ing. Dănuţ SAVU – responsible
Ing. Remus BÎRLICĂ
5. Contract no. Aditional Act no. 161/II/2000 at contract no. 17/96, Theme A5 – Development of high productivity GMA welding processes
Research team:
Ing. Fiz. Valentin BÎRDEANU (ISIM Timişoara)
6. Grant T4 Contract no. 6105 / 2000, Theme T4 – Research on the influence of the electromagnetic interaction in two wires GMA welding in order to develop a
through-the-arc sensor dedicated to the mechanization and automation of the process.
Research team:
Ing. Danut SAVU (ISIM Timisoara) - Grant responsible
Ing. L. ROSENFELD (SLV Munchen)
7. Contract PN II no. 71-135 /2007 between CNMP and ISIM Timisoara, Theme: Microbonding systems for circuit elements and encapsulation of microsensors
and actuators – MICROWELD
Research team:
Dr.ing. Danut SAVU (ISIM Timisoara)
Other members of the consortium (7 partners).
Research projects – participation as specialist
1. Contract no. 1029/B1/1996 Theme B1 – Restauration of the components of the Endless Column monument. Nondestructive examination and the
rehabilitation of the modules of the monument. Phase B1.1 – Determination of the thickness of the walls and the revealing of the defects of the walls.
Technology of rehabilitation
Research team:
Dr. Nicolae FARBAS - responsible
Fiz. Petru BOZU
Dr.Ing. Romulus PASCU
Ing. Fiz. Sandu CRASTETI
Page 5 / 19
Curriculum Vitae
Ing. Mara TOMA
Ing. Remus BIRLICA
Ing. Danut SAVU
Fiz. Andreea BOBIC
Fiz Gerhard GRUN
Ing. Constantin BUSILA
2. Contract no. Aditional Act no. 789/20.05.1997/IV at contract 1029/1996, Theme A25 - Restauration of the components of the Endless Column monument.
Nondestructive examination and the rehabilitation of the modules of the monument. Phase A25.1 - Nondestructive examination and the rehabilitation of the
modules of the monument - preliminary rehabilitation procedures
Research team:
Dr. Nicolae FARBAS - responsible
Fiz. Petru BOZU
Ing. Danut SAVU
Ing. Ioan UNGURU
Ing. Fiz Sandu CRASTETI
Fiz. V. MALINESCU
Ing. Constantin BUSILA
Ing. Petre CIOARA
3. Contract nr. 17/A3/1997 intre MCT si ISIM Timisoara, Tema A3 - Dezvoltarea de tehnologii de imbinare continua cu rata mare de depunere prin sudare MAG
in amestecuri de gaze. Faza A3.1 - Cercetari si experimentari de sudare MIG/MAG de mare productivitate cu 1 si 2 sarme pentru sudarea otelurilor carbon si
slab aliate specifice productiei de utilaj minier si metalurgic.
Research team:
Ing. Emil VARSANDAN - responsabil tema
Ing. Maria VARSANDAN
Ing. Danut SAVU
Ing. Ligius VOIN-OPRISOR
Fiz. Andreea BOBIC
4. Grant T1 Contract nr. Act Aditional 161/II/2000 la contractul nr. 17/96 intre MCT si ISIM Timisoara, Tema T1 - Cercetari privind transferul de metal la sudarea
in mediu de gaze protectoare. Faza T1.1 - Cercetari privind modul de transfer la sudarea in mediu de gaz protector cu electrod fuzibil plin/tubular in conditiile
unei rate de depunere crescute. Model matematic al formarii picaturii de metal. Experimentari de sudare si inregistrari video ale procesului de transfer.
Research team:
Prof.Dr.Ing. Dorin DEHELEAN (ISIM Timisoara) - responsabil tema
Ing. Danut SAVU (ISIM Timisoara)
Ing. Fiz. Valentin BÎRDEANU (ISIM Timisoara)
Prof.Dr.Ing. Livius MILOS (UPT, Catedra UTS)
Prof.Dr.Ing. Gheorghe GLITA (UPT, Catedra UTS)
S.l. ing. Stelian NEGOITESCU (UPT, Catedra UTS)
5. “Joining by welding of two volume sections of a ship using wide gaps“ – proiect al Universităţii Forţelor Armate Federale (Universitaet der Bundeswehr)
Hamburg, Republica Federală Germania
Research team:
Dr. ing. Gerd HUISMANN (Universitaet der Bundeswehr)
Ing. Dănuţ SAVU (Universitaet der Bundeswehr)
Student Stephen POHL (Universitaet der Bundeswehr)
Tehn. Siegfried DIETRICH (Universitaet der Bundeswehr)
6. Contract CEEX nr. 85/2006 între Universitatea din Craiova şi ANCS (MATNANTECH), Dezvoltarea cunoaşterii asupra elaborării şi microprocesării prin
metalurgia pulberilor a materialelor nanostructurate pentru componente MEMS, acronim: PRONANOMAT,
Research team:
Coordonator consorţiu: Universitatea din Craiova
Prof.Dr.Ing. Mihail Mangra Director de Proiect
7. Contract CEEX nr. 265/2006 între ISIM şi ANCS, Centru virtual pentru tehnologii integrate cu aplicaţii ale energiei electroultraacustice în ingineria materialelor
avansate, acronim ULTRATECH
Coordonator consorţiu: INCD în Sudură şi Încercări de Materiale (ISIM) Timişoara
Director de Proiect: Ing. Octavian Oancă
8. Contract CEEX nr. 266/2006 între ISIM şi ANCS, Microstraturi plurifuncţionalizate pentru acoperirea aliajelor de titan prin tehnologii avansate, acronim
MICROFUNCTIA
Research team:
Director de Proiect: Prof.Dr.Ing. Doru Romulus Pascu
9. Contract CEEX nr. 85/2006, modulul III între ISIM şi ANCS, Creşterea vizibilităţii internationale a activităţilor de
cercetare - dezvoltare în domeniul tehnologiilor inovative de îmbinare a materialelor noi"; acronim EU-JoinMat
Research team:
Director de Proiect: Prof. dr. ing. Dorin DEHELEAN
10. Contract INFRATECH nr. 314/ 2006 între ISIM şi ANCS, Implementarea serviciilor de transfer tehnologic în
domeniul sudării, acronim INFRATECH
Research team:
INCD în Sudură şi Încercări de Materiale (ISIM) Timişoara
Director de Proiect: ing. Carmen MARIAN
Research projects that were implemented in industry – participation as specialist
1.
Contract nr. 215/1996 between MCT and ISIM Timisoara, Title: Elaboration and qualification of the welding procedure for the pipeline dedicated to the
water supplying of Drobeta Turnu-Severin, source Toplet.
Page 6 / 19
Ionel Dănuț SAVU
Curriculum Vitae
Research team:
Ing. Emil PARASCHIV – Project Director
Ing. Danut SAVU – Scientific Researcher
Internaţional co-operation in research
Year
Project title
Position
Partner
1998
“Two wires GMA welding“
1999
“High productivity MIG/MAG welding
processes“
“Welding data acquisitions systems”
Contractual
Participant
Contractual
Participant
Contractual
Participant
Institutul de Sudură Schweisstechnische Lehr – und Versuchsanstalt, SLV
Munchen, Germany
EWM High Tech Precision Schweisstechnick GmbH, Mündersbach, Germany
1997
EWM High Tech Precision Schweisstechnick GmbH, Mündersbach, Germany
Research projects co-ordinated by Danut SAVU in Romania for EU partners
Year
1999
Project title
“High speed welding. Application in
shipbuilding. “
Position
Contractual
Participant
Result / Beneficiary
Raport de cercetare pentru Messer – EWM High Tech Precision
Schweisstechnick GmbH, Mündersbach, Germany
Research and Transfer of Innovation or Mobility European Projects
Year
20152018
Project
H2020 GA 633929 – Promoting
innovation in the inland waterways
transport sector – PROMINENT
http://www.prominent-iwt.eu/
Position
Participant as
Scientific
Researcher
20142016
E+ 2014-1-RO01-KA202-002913
Implementation of the guidelines for
mechanized, orbital and robotized welding
personnel
http://www.futureweld.eu/
TEN-T 2012-EU-18067-S
LNG MASTERPLAN FOR RHINE-MAINDANUBE – LNG
Project Director
20122015
http://www.docfoc.com/download/documents/lngmasterplan-for-rhine-meuse-main-danube-2012eu-18067-s
Member of the
implementation
team
Partners
CO – STICHTING STC-GROUP (STC)
1. Via donau
2. STICHTING PROJECTEN BINNENVAART (SPB )
3. PRO DANUDE MANAGEMENT GMBH (PRO)
4. ECORYS NEDERLAND B.V. (ECO) BV
5. TUV NORD MOBILITAT GMBH & CO KG (TUV )
6. Entwicklungszentrum fuer Schiffstechnik und Transportsysteme e.V. (DST))
7. UNIVERSITATEA DIN CRAIOVA (IMST)
8. NEDERLANDSE ORGANISATIE VOOR TOEGEPAST
NATUURWETENSCHAPPELIJK
ONDERZOEK - TNO (TNO)
9 FH OO FORSCHUNGS & ENTWICKLUNGS GMBH (FHOO) GMBH
10. PANTEIA BV (PAN) BV
11. COMPANIA DE NAVIGATIE FLUVIALA ROMANA NAVROM SA (NAV)
12. ADS PROPULSION BV (STI)
13. WAERTSILA NETHERLANDS B.V. (WAR)
14. SGS NEDERLAND BV (SGS ) BV
15. MULTRONIC NV (MUL) NV
16. BUNDESANSTALT FUR WASSERBAU (BAW)
ASOCIAŢIA DE SUDURĂ DIN ROMÂNIA, RO
ISTITUTO ITALIANO DELLA SALDATURA – ENTE MORALE, IT
EUROPEAN FEDERATION FOR WELDING, JOINING AND CUTTING, PT
INSTITUTO DE SOLDADURA E QUALIDADE, PT
INSTITUT SPAWALNICTVA, PL
CO – PRO DANUBE INTERNATIONAL
1. A3PS - Austrian Agency for Alternative Propulsion Systems (Reinhard Pfliegl)
Erste Group Bank (Werner Weihs-Raabl)
EVN AG (Peter Layr)
2. FH OÖ Forschungs & Entwicklungs GmbH (Johann Kastner)
3. Pro Danube Mgt. (Manfred Seitz)
4. Port of Antwerp (Eddy Bruyninckx)
5. Bulmarket DM Ltd. (Stanko Stankov)
6. Asociace NGV o.s. (Zdenek Prokopec)
7. DST Entwicklungszentrum für Schiffstechnik und Transportsysteme e.V.
(Ernst Müller)
Germanischer Lloyd SE (Piere C. Sames)
8. Universität Duisburg Essen (Wolfgang Sellinat)
9. Port autonome de Strasbourg (Jean-Louis Jérôme)
10. Chemgas Barging S.ár.l. (Bernd Schöning)
11. Argos Bunkering B.V. (R. Klop)
12. Chemgas Holding B.V. (Jacob Naaborgh)
13. DCL Barge B.V. (Frederik Benny Maelissa)
14. Port of Rotterdam (H.J.H.M. Hennissen)
15. Stichting STC Group (Erik Hietbrink)
16. Kooiman Marine B.V. (Marinus B. Kooiman)
17. LNG E-motion B.V. (Pieter Marinus Versluis)
18. APDM Compania Nationala Administratia Porturilor Dunarii Maritime (Luigi
Marius Ciubrei)
19. Ceronav - Centrul Român pentru Pregătirea şi Perfecţionarea Personalului
Page 7 / 19
Curriculum Vitae
20122014
SEE D/0080/3.2/X
HARMONIZED INLAND NAVIGATION
TRANSPORT THROUGH EDUCATION AND
INFORMATION TECHNOLOGY – HINT
Member of the
implementation
team
20112013
2011-1-PL1-LEO05-19898
Multimedia Dictionary for Welding
Imperfections
http://www.weldimp.com/
Contact person
from the
Romanian
Welding Society
20102012
Leonardo daVinci, 2009-1-LEO05-03591,
EU-JOINTRAINING - Implementation of
European Guidelines for Joining
Technology Training
http://www.eu-jointraining.com/
Project Director
20092012
SEE/A223/3.2/X – Cooperation-Network
for Logistics and Nautical Education
focusing on Inland Waterway Transport in
the Danube Corridor Supported by
Innovative Solutions - NELI
Member of the
implementation
team
2007 –
2009
Project. Ref.: LLP-LDV/TOI/2007/PT/07
Eurodata - Online Examination Database
for Harmonised Training
Member of the
implementation
team
dinTransporturi Navale (Ovidiu Sorin Cupsa)
20. Compania De Navigație Fluvială Română Navrom S.A. (Constantin Hartan)
21. Transport Trade Services S.A. (Ion Stanciu)
22. Danube LNG – European Economic Interest Grouping (Robert Kadnar)
23. VUD a.s. (Lubomír Palcák)
24. Port of Mannheim (Roland Hörner)
25. LINZ AG für Energie, Telekommunikation, Verkehr und Kommunale Dienste
(Erich Haider)
26. MIT/RINA (Enrico Maria Pujia)
27. Schönherr Rechtsanwälte GmbH (Christian Schmelz)
28. Bodewes Binnenvaart (Simon Provoost)
29. Bernhard Schulte (Cyprus) Ltd (Charis Charilaou)
CO - Centrul Român pentru Pregătirea şi Perfecţionarea Personalului din
Transporturi Navale – CERONAV
1. Via Donau – Austrian Waterway Company
2. Ennshafen OÖ GmbH
3. Upper Austrian University of Applied Science Research and Development
Ltd.
4. Pro Danube International – Verein zur Förderung von Transporten auf der
Donau
5. University of Žilina, Department of Water Transport
6. University of Technology and Economics, Department of Aircraft and Ships
7. National Association of Radio Distress-Signalling and Infocommunication –
RSOE
8. Universitatea Craiova, Department of Engineering and Management of
Technological Systems
9. Autoritatea Navala Romana
10. Executive Agency Maritime Administration
11. University of Rousse
IPA Partener 1: Inland Navigation Development Centre
IPA Partener 2: Faculty of Transport and Traffic Sciences.
IPA Partener 3: School of shipping, shipbuilding and hydrobuilding
IPA Partener 4: Municipality of Savski Venac
ENPI: Odessa National Maritime Academy
EU ASOCIAT: Union of Romanian Inland Ports
INSTITUT SPAWALNICTVA, PL ASOCIAȚIA DE SUDURĂ DIN ROMÂNIA
INSTITUTO DE SOLDADURA E QUALIDADE, PT
INSTITUTUL DE TEHNOLOGIA SUDĂRII SI MATERIALE DIN BUDAPESTA
ASOCIAŢIA DE SUDURĂ DIN ROMÂNIA, RO
ČESKÁ SVÁŘEČSKÁ SPOLEČNOST ANB, CZ
SCHWEISSTECHNISCHE LEHR- UND VERSUCHSANSTALT SLC
DIUSVURG, NIEDERLASSUNG DER GSI MBH, DE
ISQ – INSTITUTO DE SOLDADURA E QUALIDADE, PT
Consortium
Partener 1: Via Donau – Austrian Waterway Company
Partener 2: Ennshafen OÖ GmbH
Partener 3: Upper Austrian University of Applied Science Research and
Development Ltd.
Partener 4: Executive Agency Maritime Administration
Partener 5: High River Shipping School
Partener 6: University of Technology and Economics, Department of Aircraft
and Ships
Partener 7: National Association of Radio Distress-Signalling and
Infocommunication – RSOE
Partener 8: Universitatea Craiova, Facultatea de Ingineria si Managementul
Sistemelor Tehnologice
Partener 9: Autoritatea Navala Romana
Partener 10: Technical University of Kosice, Faculty of Manufacturing
Technologies
Partener 11: University of Žilina, Faculty of Operations and Economics of
Transport and Comunications , Department of Water
Transport
IPA Partener 1: Faculty of Transport and Traffic Sciences
IPA Partener 2: Inland Navigation Development Centre Ltd.
IPA Partener 3: School of shipping, shipbuilding and hydrobuilding
10 % Partener 1: Odessa National Maritime Academy
Partners:
Conducatorul de proiect este Federatia Europeana de Sudura (EWF) –
Portugalia, iar parteneri la acest proiect sunt: SLV Duisburg Germania,
Page 8 / 19
Ionel Dănuț SAVU
Curriculum Vitae
http://www.eurodataexam.com/
Project number: 135719-LLP-2007-PTKA4MP
WELDSPREAD – European Transfer
Models for Welding Personnel Certificate
http://weldspread.org/
2007 –
2009
2000
"Leonardo da Vinci", Proiectul de
mobilitate, No 051 Section 1.1.2c
"Continuous training program in the field
of advanced technologies for welding and
related processes“
Member of the
implementation
team
Participant
IIS Italia, ISQ Portugalia, ASR Romania, Izv Slovenia, VUZ – Slovacia
Partners:
EWF – European Federation for Welding, Joining and Cutting, PT
CWS - Czech Welding Society, CZ
University of Thessaly, EL
KTK - Kaunas Technical College, LT
MhTE – Hungarian Association of Welding Technology and Material Testing, HU
ASR – Romanian Welding Society, RO
IV – Institut za varilstvo d.o.o., SI
Welding Research Institute – Industrial Institute of SR, SK
Institutul Rhein-Westfalien Technische Hochschule (RWTH) Aachen, Republica
Federală a Germaniei
Îndrumator Dipl. Ing. Arne Fischer
Participations in research projects developed in foreign institutes
Year
20012003
Project title
“Joining by welding of two volume sections of a ship
using wide gaps“
Position
Scientific Researcher
Responsible with the
experimental program
Partner
University of the Federal Armed Forces (Universitaet der
Bundeswehr) Hamburg, Federal Republic of Germany
Books
Type
Books/chapters as author:
4
Books for students:
4
Laboratory guides:
7
Title
1. Savu, I.D. – Tehnologia Sudării cu arcul electric, Ed. Universitaria, Craiova, 2007
ISBN 978-973-742-727-4
2. Savu, I.D. – Sudabilitatea materialelor inginerești. Oțeluri și fonte, Ed. Universitaria, Craiova, 2010
ISBN 978-606-510-972-8
3. Savu, I.D., Savu, S.V. – Heated tool and electrofusion welding of polymers, Ed. Universitaria, Craiova, 2013
ISBN 978-606-14-0772-9
4. Mangra, M.; Ciupitu, I.; Gingu, O.; Savu, I.D.; Savu, S.; Nicolicescu, C.; Bica, I.; Morjan, I.; Kappel, W.; Dehelean,
D. – Procedee de elaborare a pulberilor nanometrice și nanostructurate, Ed. Universitaria, Craiova, 2008
ISBN 978-606-510-305-4
1. Savu S.V., Savu, I.D. – Echipamente pentru sudare. Curs, 239 pag, Reprografia Universității din Craiova, 2012
2. Savu S.V., Savu, I.D. – Tehnologii neconvenționale de sudare. Curs, 156 pag, Reprografia Universității din
Craiova, 2012
3. Savu, I.D., Savu S.V. – Bazele proceselor de sudare. Curs, 237 pag, Reprografia Universității din Craiova, 2012
4. Savu, I.D. – Logistica Industrială, Curs, 164 pag, Reprografia Universității din Craiova, 2014
1. Savu S.V., Savu, I.D. – Echipamente pentru sudare. Indrumar de lucrări practice, 113 pag, Reprografia Universității
din Craiova
2. Savu S.V., Savu, I.D. – Tehnologii neconvenționale de sudare. Indrumar de lucrări practice, 93 pag, Reprografia
Universității din Craiova
3. Savu, I.D., Savu S.V. – Bazele proceselor de sudare. Indrumar de lucrări practice, 113 pag, Reprografia
4. Savu, I.D., Savu S.V. – Tehnologia sudării prin topire. Indrumar de lucrări practice, 121 pag, Reprografia
5. Savu, I.D., Savu S.V. – Tehnologia sudării prin topire. Indrumar de proiectare, 49 pag, Reprografia Universității din
Craiova
6. Demian, M., Savu, I.D., Ciobanu, M., Savu, S. – Tehnologia materialelor. Indrumar de laborator, 145 pag, Editura
Universitaria, ISBN 978-606-510-106-7
7. Ciupitu I., Savu I.D. – Proiectarea dispozitivelor de sudare. Indrumar de proiectare, 34 pag, Reprografia
Universitatii din Craiova
Scientific papers presented in national and international conferences: 38
1.
2.
3.
4.
5.
6.
7.
Savu, I.D. (ISIM Timisoara), Dzelnitzki, D. (EWM High Tech Precision GmbH, Mundersbach, Germany) “Documentarea parametrilor de sudare
utilizând sistemul Q-DOC 9000“, Conferinţa Internaţională “Sudură - Control“, Timişoara, 6-9 mai 1997
Savu, I.D., “Măsurarea debitului de gaz protector utilizând traductoare de debit cu lichide magnetice“, Conferinţa Internaţională “Sudură - Control“,
Timişoara, 6-9 mai 1997
Brostean, L., Potencz, I. (Universitatea “Politehnica“ din Timişoara), Bozu, P., Savu, I.D. (ISIM Timisoara), “Utilizarea traductoarelor cu lichide
magnetice la sudarea MAG “, “Zilele academice timişene“, A 5-a ediţie a Academiei de Ştiinţe din România, Filiala Timişoara, 22-24 mai 1997
Savu I.D., June, C., “Influenţa forţelor electrodinamice, a presiunii gazului de protecţie şi a poziţiei relative a capetelor de sudare asupra stabilităţii
procesului de sudare MAG cu două sârme “, Sesiunea de Comunicări Ştiinţifice a Universităţii “Aurel Vlaicu” din Arad, Ediţia a IV-a, “25 de Ani de
învăţământ tehnic superior arădean”, Arad, 30-31 octombrie 1997
Burca M., Negoitescu, St. (Universitatea Tehnică Timisoara), Savu, I.D. (ISIM Timisoara) “Sudarea MIG-MAG în curent pulsat, o cale de creştere a
productivităţii la sudare“, Sesiunea Anuală de Comunicări Ştiinţifice a Universităţii din Oradea, Oradea, 28-30 Mai 1998
Savu, I.D., June, C. “Creşterea productivităţii procesului de sudare MAG prin utilizarea a două sârme şi efectele acesteia asupra calităţii îmbinărilor
sudate“, Conferinţa Internaţională “Sudura ’98“, Timişoara, 17-19 Iunie 1998
Savu, I.D., R. Bîrlică, “Sudarea cu două sârme în mediu de gaz protector – variantă de mare productivitate a procedeului de sudare MIG/MAG“,
Conferinţa Internaţională “ Sudura – prezent şi viitor “, Sibiu, 15-16 Octombrie 1998
Page 9 / 19
Curriculum Vitae
8.
Savu, I.D., “Electromagnetic interaction in two wires GMA welding” The 52nd Annual Assembly and International Conference of the International
Institute of Welding, Lisbon, 19th of July, 1999
9.
Dehelean, D., Savu, I.D., “The development of the high deposition rate GMA welding processes”, Eurojoin 4,
International Conference of the European Welding Federation, Dubrovnik, Croatia, mai 2001
10.
Savu I.D. (Universität der Bundeswehr Hamburg) „Joining by welding of two volume sections of a ship using wide gaps-I“, WiPS P3.1 Conference,
Intermediate Meeting of WiPS, Germanischer Lloyd, Hamburg, June, 2002
Savu I.D. (Universität der Bundeswehr Hamburg) „Joining by welding of two volume sections of a ship using wide gaps-II“, DVS Arbeitgruppe A6.2
Conference, Hamburg, 15.11.2002
Savu, I.D. „The influence of the frequency of the oscillation on the through-the-arc sensor’s function in Two-Wires GMA Welding”, Eurojoin 5, EWF‘s
International Conference, Wien, 13-14 mai 2004
Savu, I.D., Savu, S. - Flow rate nanosensor for shielding gas welding systems - The 1st South-East European Welding Congress, 24-26 May 2006,
Timisoara, Romania
Savu, I.D., Bîrdeanu, V., “Emisia de fum la procesarea cu laser în regim pulsat a materialelor compozite nanostructurate”, Conferinţa Internaţională
Tehnologii Inovative pentru Îmbinarea Materialelor Avansate, Timişoara, 07-08.06.2007, ISBN 978-973-8359-42-0, Pag. 253-258
Savu, S., Savu, I.D., „Noi senzori în tehnologiile de sudare”, Conferinţa Internaţională Tehnologii Inovative pentru Îmbinarea Materialelor Avansate,
Timişoara, 07-08.06.2007, ISBN 978-973-8359-42-0, Pag. 164-169
Savu, S., Birdeanu, V., Dehelean, D., Savu, I.D. - Development of a nanostructured sensor for the laser-arc
11.
12.
13.
14.
15.
16.
17.
18.
19.
20.
21.
22.
23.
24.
25.
26.
27.
28.
29.
30.
31.
32.
33.
welding process - The 60th Annual Assembly and International Conference of the IIW,
01-08 July 2007, Dubrovnik, Croatia
Savu, I.D., Savu, S., Birdeanu, V. - Microjoints for micro-electronical applications - The 60th Annual Assembly and
International Conference of the IIW, 01-08 July 2007, Dubrovnik&Cavtat, Croatia
Savu, S., Bica, I., Savu, I.D., Catana, G., Bucse, G., Cavitational iron microparticles and nanoparticles generation by plasma procedures,
Conference of the European Powder Metallurgy Association 2007 Toulouse, France, 15-17 octombrie 2007, ISBN 978 – 1 – 899072 – 29 – 3
Bîrdeanu, V., Savu, S., Dehelean, D., Savu, I.D., Statistical approach of Nd:YAG laser welding ol aluminium matrix nanostructured composite
material for MEMS technology, Conference Applications des Lasers de Puissance LASERAP’6, Le Moiron, 01st-05th of October 2007
A. Ionescu, I.D. Savu, S. Savu, D. Coman - Computational features of flow modeling in nanostructured sensor, Proceedings of International
Conference BICS’08, Univ. Petru Maior,Tg Mures, 2008
I.D. Savu, S.V. Savu, G. Sebes, N. Gherasim - Laser device for polymer microjoining, The 3rd Int. Conf. Innovative
Technologies for Joining Advanced Materials, p. 118-121, ISSN 1844-4938
I.D. Savu, Savu Sorin Vasile, Ciupitu Ion - Improving the behaviour of the sintered composites in laser
processing by ultrasonic vibration aided compaction, The 4th Int. Conf. on PM, p.147, ISBN 978 – 973 – 53 –
0097 - 5
Ion Ciupitu, Gabriel Benga, Adela Ionescu, I.D. Savu - The optimization of the process of compacting iron,
cast iron and copper powder mixtures, The 4th Int. Conf. on PM, p.60, ISBN 978 – 973 – 53 – 0097 - 5
Mangra Gabriel Ioan, Savu Sorin Vasile, I.D. Savu - Inductive sensor with sintered magnetic core to evaluate
the performances of the table tennis players, The 4th Int. Conf. on PM, p.93, ISBN 978 – 973 – 53 – 0097 - 5
Valentin Grecu, Sorin Vasile SAVU, Luminita GRECU, I.D. SAVU - Analytical Solution and Computer Code
for Matching Impedance of the Load at the barium Ferrite Sintering Process Using the Microwave Heating
Procedures, The 4th Int. Conf. on PM, p.96, ISBN 978 – 973 – 53 – 0097 – 5
Sebeş Grigore, I.D. Savu, Sorin Vasile Savu – Evaluări termo-diferenţiale pentru aprecierea comportării la
microîmbinare cu microunde a feritei de bariu tip W, Annual Conferene of ASR, Drobeta Tr.-Severin,
30.09.02.10.2009, ISSN 1843 – 4738
Sebeş, G., Fulga, D., Savu, I.D., Savu, S.V. – Studiu comparativ de măsurare a rezistențelor electrice la
micro-îmbinările obținute prin procedeul eutectic și termosonic, International Conference ADEM 2010,
Drobeta Turnu-Severin
Grigore Sebes, I.D. Savu, Sorin Savu – Evolutia duritatii HV in sectiunea microimbinarilor eutectice obtinute
cu aliaje de lipit ecologice - International Conference TIMA 2010, Timisoara
Gabriela Demian, I.D. Savu, Mihai Demian, Aurel Sebes, Eutectic Microbonding of Copper Lamellar
Elements of MEMS World Congres on engineering WCE 2010, Lectures Notes in Engineering and Computer
Science, London, 30 iunie -2 iulie 2010, International Association of Engineerings, pag 1047-1049, ISBN –
978-988-18210-7-2
Sebes G., I.D. Savu, Savu S, Grecu V., Electrical conductors microjoining by laser fusion, the 2nd see IIW
Interna'ional CongressPipeline welding and current topic of the region, Proceedings ISBN 978-954-9322-255, Sofia, 21-24.10.2010
I.D. Savu, S. Savu, Gr. Sebes, Nd-YAG Laser heating influence on the Welding process of Cu-Al matrix
nanostructured material, The 1st Central and Eastern European Committee for Thermal Analysis and
Calorimetry, 7-10 Sept. 2011, Craiova
I.D. Savu, S. Savu, European Guidelines for Qualification in Polymer Welding, The 1st Central and Eastern
European Committee for Thermal Analysis and Calorimetry, 7-10 Sept. 2011, Craiova
I.D. Savu, Gr. Sebes, S. Savu, Preheating and Heat addition by Laser beam in Hybrid Laser-US welding,
The 1st Central and Eastern European Committee for Thermal Analysis and Calorimetry, 7-10 Sept. 2011,
Craiova
Page 10 / 19
Curriculum Vitae
34.
35.
36.
37.
38.
Ionel Dănuț SAVU
I.D. Savu, L. Domuta, New developments in the European system for qualification and certification in the field
of the thermoplastics’ welding, The 5th International Conference – Innovative technologies for joining
advanced materials TIMA 11, Timisoara, iun. 2011
V. Tsakiris, E. Enescu, M. Lungu, M. Lucaci, D. Savu, V. Marinescu, F. Albu, G. Alecu, D. Patroi, Al-Al2O3
metallic composites consolidated by spark plasma sintering, The 5th International Conference – Innovative
technologies for joining advanced materials TIMA 11, Timisoara, iun. 2011
I.D. Savu, S.V. Savu - Laser-Diode as power source for polymer Bonding, International Conference ADEM
2012, Drobeta Turnu Severin, decembrie 2012
S.V. Savu, I.D. Savu, Transnational cooperation network among the IWT education and training
organizations, Int. Conf. Advances in Engineering and Management ADEM 2012, Dr.Tr.Sev., 2014
G.C. Benga, A. Olei, I.D. Savu, Influence of the cutting parameters on the surface roughness when
machining hardened steel with ceramic and PCBN cutting tools, Int. Conf. ADEM 2014, Dr.Tr.Sev., 2014
Scientific papers published in specialized journals: 27
1.
Savu, I.D., June, C. “Influenţe ale forţelor electrodinamice asupra stabilităţii procesului de sudare cu două sârme în mediu de gaz protector“, Sudura
(ISSN 1453-0384, cota B+), an VIII, 2/1998, pag. 24-28
2.
Savu I.D., Bîrlică, R. “Sudarea MAG de mare productivitate în poziţie orizontală pe perete vertical a oţelurilor pentru construcţii navale“, BID ISIM
(B+) ISSN 1453-0392, 1/1999, pag. 12-15
Savu, I.D., “Studii privind dezvoltarea senzorilor de arc la sudarea cu două sârme în mediu de gaze protectoare”, BID ISIM ISSN 1453-0392 (B+),
1/2001, pag. 10-14
Savu, I.D., “Construirea semnalului de referinţă necesar funcţionării sistemelor senzor-arc la sudarea MAG cu două sârme – Partea I: Modelarea
matematică a reacţiei sursei de sudare la modificarea inerentă, în timpul sudării, a unor parametri ai sistemului de sudare”, Sudura (ISSN 1453-0384,
cota B+), an XIII, 1/2003, pag. 53-61
Savu, I.D., “Construirea semnalului de referinţă necesar funcţionării sistemelor senzor-arc la sudarea MAG cu două sârme – Partea a II-a:
Modelarea matematică a formei undei de curent”, Sudura (ISSN 1453-0384, cota B+), an XIII, 2/2003, pag. 28-41
Savu, I.D., „Studiul influenţei deschiderii la rădăcină a rostului de sudare asupra tensiunilor interne şi asupra riscului de fisurare la rece a îmbinării
sudate cap la cap – Partea I: Determinarea experimentală a valorilor forţei şi momentelor dintr-o îmbinare sudată utilizând încercarea IRC”, Sudura
(ISSN 1453-0384, cota B+), an XIV, 2/2004, pag. 5-12
sudate cap la cap – Partea a II-a: Evidenţierea experimentală a riscului de fisurare la rece în condiţiile utilizări unor rosturi cu deschideri mari şi medii
de protecţie contaminate cu hidrogen”, Sudura (ISSN 1453-0384, cota B+), an XIV, 3/2004, pag. 12-19
Savu, I.D., „Influenţa proiectării constructive asupra rigidizării îmbinărilor sudate la nave – Partea I: Determinarea experimentală a influenţei soluţiei
constructive asupra intensităţii de încastrare”, Sudura (ISSN 1453-0384, cota B+), an XIV, 5/2004, pag. 5-13
Savu, I.D., „Influenţa proiectării constructive asupra rigidizării îmbinărilor sudate la nave – Partea a II-a: Determinări experimentale ale influenţei
elementelor de asamblare ale unei construcţii sudate asupra intensităţii de încastrare”, Sudura (ISSN 1453-0384, cota B+), an XIV, 6/2004, pag. 1117
Savu, S., Savu, I.D., „Flow rate nanosensor for shielding gas welding systems”, BID ISIM (B+), ISSN 1453-0392, pag. 178-185
Savu, I.D., Savu, S., Birdeanu, V. - Microjoints for micro-electronical applications, Welding in the World, ISSN 0043-2288, 2007, vol. 51, SPI, pag.
403-410
Savu, S., Birdeanu, V., Dehelean, D., Savu, I.D., „Development of a nanostructured sensor for the laser-arc
welding process”, Welding in The World, ISSN 0043-2288, 2007, vol. 51, SPI, pag. 75-82, UK
M. Balasoiu, E. M. Anitas, I. Bica, R. Erhan, V. A. Osipov, O. L. Orelovich, I.D. Savu, S. Savu, A. I. Kuklin, SANS of interacting magnetic micro-sized
Fe particles in a Stomaflex creme polymer matrix, Journal of Optoelectronics and Advanced Materials (ISI), Vol 2 ISS. 11- 2008_(Printing date
October 30, 2008 ), pag. 730-734
M. Balasoiu, M. L. Craus, A. I. Kuklin, J. Plestil, V. Haramus, A. H. Islamov, R. Erhan, E. M. Anitas, M. Lozovan, V. Tripadus, C. Petrescu, I.D. Savu,
S. Savu, I. Bica, Microstructure of magnetite doped elastomers investigated by SAXS and SANS, Journal of Optoelectronics and Advanced Materials
(ISI), Vol.10 ISS.11- 2008_(Printing date November 11, 2008), p.2932-2935
I.D. SAVU, S.V. SAVU, I. CIUPITU, G. MANGRA, and V. GRECU - THROUGH-THE-ARC SENSING FOR TWO-WIRES GMA WELDING OF
ALUMINUM BASEMENT OF THE FLIGHT SIMULATORS FOR SPORTSMEN TRAINING, Journal of International Scientific Publication: Matherials,
Methods & Technologies, 2010
S. Savu, G. Mangra, I. Ciupitu, I.D. Savu, N. Gherasim - THERMAL FIELD ANALYSIS IN MICROWAVE SINTERING PROCESSOF BARIUM
FERRITES FOR PING-PONG TABLE’S SENSOR, Journal of International Scientific Publication: Matherials, Methods & Technologies, 2010
I.D. Savu, I. Ciupitu, V. Birdeanu, S. Savu - Laser welding of low friction nanostructured sintered composites: technical and environmental aspects,
Laser welding of low friction nanostructured sintered composites: technical and environmental aspects - Int. J. Microstructure and Materials
Properties, Vol. 5, Nos. 2/3, 2010, Pp 261-275
G. Mangra, S. Savu and I.D. Savu - Inductive sensor with sintered magnetic core to evaluate the performances of the table tennis players, „Materials
Science Forum” journal, edited by Trans. Tech. Publications Ltd, Switzerland, 2010
I. Ciupitu, G. Benga, A. Ionescu and I.D. Savu , The improving of the process of the iron, the cast iron and the copper powder mixing, „Materials
Science Forum” journal, edited by Trans. Tech. Publications Ltd, Switzerland, 2010
Sebeș, G., Savu, I.D., Demian, G. – New system for micro-joining Wedge Bonding of gold wires in metallic foils, using a laser-ultrasonic hybrid active
head, U.P.B. Sci. Bull., Series A: Applied Mathematics and Physics, Vol. 74, pag. 163-170, Iss. 1, 2012, ISSN 1223-7027
DOI:
Savu, I.D., Savu, S.V., Sebeș,G. - Preheating and heat addition by laser beam in hybrid laser-US welding, J Therm Anal Calorim (2013), 111:12211226,
DOI: 10.1007/s10973-012-2449-5
I.D. Savu, S.V. Savu, G.C. Benga, Thermal Runaway of the BaCO3 + Fe2O3 Homogenous Mixture and Mechanical Alloys at the Microwave Heating,
Advanced Materials Research (Volume 837), pp 185-189,
10.4028/www.scientific.net/AMR.837.185
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
13.
14.
15.
16.
17.
18.
19.
20.
21.
22.
Page 11 / 19
Curriculum Vitae
23.
24.
25.
26.
27.
S.V. Savu, I.D. Savu, I. Ciupitu Thermal Analysis to Evaluate Ageing Process in Heated Tool and Electrofusion Welding of Polymer Pipes, Advanced
Materials Research (Volume 837), pp 190-195,
10.4028/www.scientific.net/AMR.837.190
S. Savu, I.D. Savu, Glass Welding by Microwave Heating, Revista di Saldatura, Italia, Anno LXV, Nr. 2, 2013
M. Miclau, M. Mangra, I.D.Savu, Compozitie cu Cu-Cr si Cu-Cr-W destinate confectionarii de electrozi pentru sudare prin presiune in puncte, Sudura
Journal 3/2014, BDI
I.D. Savu, Operator sudor international pentru sisteme mecanizate / orbitale/robotizate de sudare – calificare in cerere crescanda pe
piataproducatorilor de structuri sudate din Romania, Sudura Journal 1/2015, BDI
I.D. Savu, Procese de microimbinare a elementelor de circuit electric, Sudura Journal 3/2015, BDI
Articles booked in internatonal scientific databases: 22
No.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
Article
Database
Miclău, M., Mangra, M., Savu, I.D. – CuCr and CuCrW composites dedicated to spot resistance welding electrodes, Revista Sudura Nr. 3/2014, pag.
39-43, ISSN 1453 – 0384
CSA Ilumina
S Savu, S., Savu, I.D. – Glass welding by microwave heating, (2013) Rivista Italiana della Saldatura, 65 (2), pp. 221-227
SCOPUS
Sebes, G., Savu, I.D., Savu, S.V., Grecu, V. – Electrical conductors micro-joining by laser beam fusion, Proceedings of the second South East
European IIW International, Congress: Welding - HIGH-TECH Technology in 21st century, Sofia, BULGARIA, 21-24 October 2010, ISBN 978-9549322-25-5
IIW
Sebes, G., Savu, I.D., Savu, S.V. - Microîmbinarea prin procedeul termosonic a firelor din aur pe folii metalice, Revista Sudura Nr. 2/2011, pag. 31-35
CSA Ilumina
Demian, G., Savu, I.D., Demian, M., Sebeș, G. - Eutectic microbonding of copper lamellar elements of MEMS, Proceedings of the World Congress
on Engineering 2010 Vol II, WCE 2010, June 30 - July 2, 2010, London, U.K.
GOOGLE SCHOLAR
Savu, I.D., Savu, S.V., Mangra, G., Ciupitu, I. – Eutectic micro-bonding for electric connection of nanostructured inductive sensor used to evaluate the
performances of the table tennis players, 2010, Pages 779-783, International Conference on Advances in Welding Science and Technology for
Construction, Energy and Transportation, AWST 2010, held in Conjunction with the 63rd Annual Assembly of the International Institute of Welding,
IIW 2010; Istanbul;11 July 2010through17 July 2010
SCOPUS
IIW
Savu, S.V., Savu, I.D., Grecu, V., Ciupitu, I. – Evaluation of electrical resistance for microjoints obtained by using plasma microwave processes, 2010,
Pages 785-787, International Conference on Advances in Welding Science and Technology for Construction, Energy and Transportation, AWST
2010, held in Conjunction with the 63rd Annual Assembly of the International Institute of Welding, IIW 2010;Istanbul;11 July 2010through17 July 2010
SCOPUS
IIW
Savu, S.V., Mangra, G., Ciupitu, I., Savu, I.D., Gherasim, N. – Thermal field analysis in microwave sintering process of barium ferrites for ping pong
tables sensor, Journal of International Scientific Publication: Materials, Methods & Technologies, 2010
GOOGLE SCHOLAR
JOURNAL OF INTERNATIONAL SCIENTIFIC PUBLICATION
Savu, I.D., Ciupitu, I., Birdeanu, V., Savu S.V. – Laser welding of low friction nanostructured sintered composites – technical and environmental
aspects, International Journal of Microstructure and Materials Properties, Volume 5, Number 2-3/2010, Pag. 261-275, ISSN1741-8410,
DOI:10.1504/IJMMP.2010.035944
SCOPUS
GOOGLE SCHOLAR
BRITISH LIBRARY DIRECT
INGENTA CONNECT
INIST
Savu, I.D., Savu, S., Birdeanu, V., “Microjoints for micro-electronical applications”, Welding in the World, 2007, vol. 51, SPI, pag. 403-410, UK
(ISSN 0043-2288)
British Library Direct
SCOPUS
Savu, S., Birdeanu, V., Dehelean, D., Savu, I.D., “Development of a nanostructured sensor for the laser-arc welding process”, Welding in the World,
2007, vol. 51, SPI, pag. 75-82, UK
(ISSN 0043-2288)
SCOPUS
Savu, I.D., Savu, S., “Flow rate nanosensor for shielding gas welding systems”, Proceedings of the 1st South-East European Welding Congress, 2426 May 2006, Timisoara, Romania
(ISBN 978-973-8359-42-0)
SCOPUS
Demian, G., Ghermec, O., Savu, I.D., Demian, M., „Experimental evaluation of T6061-T6 (Al-Mg-Si) MIG butt-welds behaviour in salted wet marine
atmosphere”, Welding in the World, 2005, vol. 49, SPI, pag. 443, UK
(ISSN 0043-2288)
British Library Direct
Savu, I.D., „Influenţa proiectării constructive asupra rigidizării îmbinărilor sudate la nave – Partea a II-a: Determinări experimentale ale influenţei
elementelor de asamblare ale unei construcţii sudate asupra intensităţii de încastrare”, Sudura, an XIV, 6/2004, pag. 11-17
(ISSN 1453-0384, cota B+)
CSA Ilumina
Savu, I.D., „Influenţa proiectării constructive asupra rigidizării îmbinărilor sudate la nave – Partea I: Determinarea experimentală a influenţei soluţiei
Page 12 / 19
Curriculum Vitae
Ionel Dănuț SAVU
constructive asupra intensităţii de încastrare”, Sudura, an XIV, 5/2004, pag. 5-13 (ISSN 1453-0384, cota B+)
CSA Ilumina
sudate cap la cap – Partea a II-a: Evidenţierea experimentală a riscului de fisurare la rece în condiţiile utilizări unor rosturi cu deschideri mari şi medii
de protecţie contaminate cu hidrogen”, Sudura, an XIV, 3/2004, pag. 12-19
(ISSN 1453-0384, cota B+)
CSA Ilumina
sudate cap la cap – Partea I: Determinarea experimentală a valorilor forţei şi momentelor dintr-o îmbinare sudată utilizând încercarea IRC”, Sudura,
an XIV, 2/2004, pag. 5-12 (ISSN 1453-0384, cota B+)
CSA Ilumina
matematică a formei undei de curent”, Sudura, an XIII, 2/2003, pag. 28-41 (ISSN 1453-0384, cota B+)
CSA Ilumina
matematică a reacţiei sursei de sudare la modificarea inerentă, în timpul sudării, a unor parametri ai sistemului de sudare”, Sudura, an XIII, 1/2003,
pag. 53-61 (ISSN 1453-0384, cota B+)
CSA Ilumina
Savu, I.D., “Studii privind dezvoltarea senzorilor de arc la sudarea cu două sârme în mediu de gaze protectoare”, BID ISIM 1/2001, pag. 10-14
(ISSN 1453-0392, cota B+)
CSA Ilumina
Savu, I.D., “Electromagnetic interaction in two wires GMA welding” The 52nd Annual Assembly and International Conference of the International
Institute of Welding, Lisbon, 19th of July, 1999
SCOPUS
Lucrare citată în:
Ueyama, T., Ohnawa, T., Tanaka, M., Nakata, K., Occurrence of arc interaction in tandem pulsed gas metal arc welding, Science and Technology of
Welding and Joining, 12(6), 2007, pag.523-530
Savu, I.D., June, C. “Influenţe ale forţelor electrodinamice asupra stabilităţii procesului de sudare cu două sârme în mediu de gaz protector“, Sudura,
an VIII, 2/1998, pag. 24-28 (ISSN 1453-0384, cota B+)
CSA Ilumina
16
17
18
19
20
21
22
ISI Articles
Ionescu, A., Savu, I.D., Savu, S.V., Coman,D. - Computational features of flow modeling in nanostructured sensor, BICS 2008: Proceedings of the
1st International Conference on Bio-Inspired Computational Methods Used for Difficult Problems Solving: Development of Intelligent and Complex
Systems. AIP Conference Proceedings, Vol. 1117, pp. 125-132 2009
DOI: http://dx.doi.org/10.1063/1.3130614
Mangra, G.I., Savu, S.V., Savu, I.D. – Inductive Sensor With Sintered Magnetic Core to Evaluate the Performances of the Table Tennis Players,
Materials Science Forum Vol. 672(2011), pag. 105-108, edited by Trans. Tech. Publications Ltd, Switzerland,ISSN: 1662-9752
DOI: 10.4028/www.scientific.net/MSF.672.105
Ciupitu, I., Benga, G., Ionescu, A., Savu, I.D. - The improving of the process of the iron, the cast iron and the copper powder mixing, Materials
Science Forum Vol. 672(2011), pag. 76-79, edited by Trans. Tech. Publications Ltd, Switzerland,ISSN: 1662-9752
DOI: 10.4028/www.scientific.net/MSF.672.76
Savu, I.D., Savu, S.V., Sebeș,G. - Preheating and heat addition by laser beam in hybrid laser-US welding, J Therm Anal Calorim (2013), 111:12211226,
DOI: 10.1007/s10973-012-2449-5
Sebeș, G., Savu, I.D., Demian, G. – New system for micro-joining Wedge Bonding of gold wires in metallic foils, using a laser-ultrasonic hybrid
active head, U.P.B. Sci. Bull., Series A: Applied Mathematics and Physics, Vol. 74, pag. 163-170, Iss. 1, 2012, ISSN 1223-7027
DOI:
Savu, I.D., Savu, S.V., Benga, C.G. - Thermal Runaway of the BaCO3 + Fe2O3 homogenous mixture and mechanical alloys at the microwave
heating, Advanced Materials Research Vol. 837 (2014) pp 185-189,
DOI:10.4028/www.scientific.net/AMR.837.185
Savu, I.D., Savu, S.V., Ciupitu, I - Thermal Analysis to Evaluate Ageing Process in Heated Tool and Electrofusion Welding of Polymer Pipes,
Advanced Materials Research Vol. 837 (2014) pp 190-195
Savu, I.D., Savu, S.V., Sirbu A.N. - Heat affected zones in polymer laser marking, J Therm Anal Calorim (2013),
DOI: 10.1007/s10973-013-3443-2
Savu, I.D. – Modification of heat flow parameters during the ceramic assisted microwave heating of HDPE, Advanced Materials Research Vol.
1036 (2014) pp 240-24, © (2014) Trans Tech Publications, Switzerland
1.
2.
3.
4.
5.
6.
7.
8.
9.
Citations in ISI journals
No.
1
Article
I.D. Savu, S.V. Savu, V Birdeanu - Microjoints for micro-electronical applications, Welding in the world, vol. 51, pp. 403-410
Citations (without
auto-citations)
2
https://scholar.google.ro/scholar?oi=bibs&hl=ro&cites=16383518879144014358
Laser welding of low friction nanostructured sintered composites: technical and environmental aspects
D Savu, I Ciupitu, V Birdeanu… - International Journal of …, 2010 - inderscienceonline.com
Low friction materials in nanostructured sintered composites are used for different pairs of moving parts of MEMS
configuration. The paper aims to present some elements regarding the behaviour of such type of materials in pulsed laser
Page 13 / 19
Curriculum Vitae
2
welding process. The influences ...
[PDF] D.: Statistical approach of Nd: YAG laser welding of aluminum matrix nanostructured composite material for MEMS technology
V Bîrdeanu, S Savu, D.Dehelean… - International Conference …, 2008 - researchgate.net
Abstract MEMS technology requires special materials, eg composite materials with low weight and low friction coefficient and
some of the components require joining in the assembly process. The paper presents the results of an experimental research
using a ...
[PDF] Eutectic Microbonding of Copper Lamellar Elements of MEMS
G Demian, D Savu, M Demian, A Sebes - Proceedings of the World …, 2010 - iaeng.org
Abstract—MEMS'elements assemble and MEMS packaging use different types of bonding processes. Such processes have
one or more functions as: hermeticity, insulation, mechanical resistance, electrical connection or else. To have two functions ...
[PDF] Contribution to laser material processing
AV Bîrdeanu - researchgate.net
Nowadays, the use of laser beam for material processing became less an “exotic” application but an industrial requirement
related to high productivity, efficiency, automation and repeatability. ... The paper presents some figures related to the market
share of laser ...
Savu S.V., Birdeanu V., Dehelean D., Savu I.D. – Development of a nanostructured sensor for the laser-arc welding process,
Welding in the world, no. 51 (SPEC ISS.), pp. 75-82
2
3
[HTML] Computational Features of Flow Modeling in Nanostructured Sensors
A Ionescu, D Savu, S Savu… - BICS 2008: Proceedings of …, 2009 - scitation.aip.org
Nowadays the productivity of the welding processes represents an important factor in economy concepts. The technologies
which are developed by the researchers are oriented to the increasing of the welding processes' productivity and to the
improvement of the ...
share of laser ...
[PDF] Dezvoltãri ale procesului de micro-sudare hibridã laser WIG Laser TIG hybrid micro-welding process developments
V Bîrdeanu, D Dehelean, S Savu - researchgate.net
Laser beam material processing is one of the important RTDI directions of ISIM Timisoara. Besides the classical applications,
ie cutting and welding, which are focused on micro-processing and processing of newly developed materials (eg nanostructured/microBalasoiu, M; Anitas, E.M.; Bica, I; Erhan, R; Osipov, V.A.; Orelovich, O.L.; Savu, D.; Savu, S; Kuklin, A.I. - SANS of interacting
magnetic micro-sized Fe particles in a Stomaflex creme polymer matrix, OPTOELECTRONICS AND ADVANCED
MATERIALS-RAPID COMMUNICATIONS Volume: 2 Issue: 11, Pages: 730-734 Published: NOV 2008,
WOS:000261406600014
11
Microstructure of stomaflex based magnetic elastomers
M Balasoiu, ML Craus, EM Anitas, I Bica, J Plestil… - Physics of the Solid …, 2010 - Springer
Abstract Stomaflex elastomers filled with two types of magnetic particles (nano-and micro-sized) were investigated. It was
observed that doping with Fe 3 O 4 nanoparticles and applying a magnetic field during the polymerisation process led to a
significant change in ...
[PDF] Small-angle neutron scattering analysis of the microstructure of stomaflex creme—ferrofluid based elastomers
EM Anitas, M Balasoiu, I Bica, VA Osipov… - Optoelectronics and …, 2009 - researchgate.net
Magnetic elastomers represent a new type of composites, consisting of nano/micro sized magnetic particles dispersed in a
polymer matrix. The main advantage of these composites resides in the possibility of combining physical properties of the
constituents to obtain new ...
FITTER. The package for fitting a chosen theoretical multi-parameter function through a set of data points. Application to experimental data
of the YuMO spectrometer
AG Soloviev, TN Murugova, AH Islamov… - Journal of Physics: …, 2012 - iopscience.iop.org
Abstract Fitter is a C++ program aimed to fit a chosen theoretical multi-parameter function through a set of data points. The
method of fitting is chi-square minimization. Moreover, the robust fitting method can be applied in Fitter. Fitter was disigned to
be used for a small- ...
Magnetic field and particle concentration competitive effects on ferrofluid based silicone elastomer microstructure
M Balasoiu, VT Lebedev, DN Orlova, I Bica - Crystallography Reports, 2011 - Springer
Abstract Structural peculiarities of ferroelastomers composed of polydimetylsiloxane with embedded magnetite particles
during polymerization have been studied by small-angle neutron scattering. The effects of ferroparticles' concentration in the
range of C= 0–6 wt%, ...
SANS investigation of a ferrofluid based silicone elastomer microstructure
M Balasoiu, VT Lebedev, DN Orlova… - Journal of Physics: …, 2012 - iopscience.iop.org
Abstract Structural peculiarities of ferroelastomers composed of polydimetylsiloxane with magnetite particles embedded
during polymerization are studied by small-angle neutron scattering. The effects of ferroparticle concentration in the range up
to 6 mass.%. and ...
[PDF] MICROPARTICLES AND ELECTROCONDUCTIVE MAGNETORHEOLOGICAL SUSPENSIONS
I BICA, M BALASOIU, M BUNOIU, L IORDACONIU - nipne.ro
Abstract. Magnetorheological and electroconductive magnetorheological suspensions are of great interest for both: scientific
and applicative research. In the present paper, the production methods of microparticles and electroconductive
Page 14 / 19
Curriculum Vitae
4
Ionel Dănuț SAVU
magnetorheological ...
Microscale Fragmentation and Small-Angle Scattering from Mass Fractals
EM Anitas - Advances in Condensed Matter Physics, 2015 - hindawi.com
Using the small-angle scattering method, we calculate here the mono-and polydisperse structure factor from an idealized
fragmentation model based on the concept of renormalization. The system consists of a large number of fractal microobjects
which are ...
Fractal fragmentation and small-angle scattering
EM Anitas - Journal of Physics: Conference Series, 2015 - iopscience.iop.org
Abstract The small-angle scattering form factor of a three-dimensional idealized fragmentation model based on the concept of
renormalization is calculated. The system consists of randomly oriented microscopic fractal objects whose positions are ...
[PDF] STRUCTURAL PROPERTIES OF COMPOSITE ELASTOMERIC MEMBRANES USING SMALL-ANGLE NEUTRON SCATTERING
EM ANITAS, I BICA, RV ERHAN, M BUNOIU… - nipne.ro
The morphology of elastomeric membranes based on silicone rubber, at various concentrations of the catalyst (C) is
determined by small-angle neutron scattering (SANS) technique. Nearly all membranes display a hierarchical organization of
crystallites in ...
Magnetic system for small angle neutron scattering investigations of nanomaterials at YuMO-SANS instrument
AI Kuklin, M Balasoiu, SA Kutuzov… - Journal of Physics: …, 2012 - iopscience.iop.org
Abstract SANS measurements using unpolarized neutron beams are able to provide quantitative information on the magnetic
microstructure and the magnitude and microstructure of the magnetic anisotropy of nanomagnetic materials. A new
magnetic ...
Structural properties of fractals with positive Lebesgue measures
EM Anitas - arXiv preprint arXiv:1501.06064, 2015 - arxiv.org
Abstract: Small-angle scattering (SAS) data which show a succession of power-law decays with decreasing values of
scattering exponents, can be described in terms of fractal structures with positive Lebesgue measure (fat fractals). In this work
we present a ...
Structural investigations of fat fractals using small-angle scattering
Abstract Experimental small-angle scattering (SAS) data characterized, on a double logarithmic scale, by a succession of
power-law decays with decreasing values of scattering exponents, can be described in terms of fractal structures with positive
Lebesgue measure ...
Balasoiu, M; Craus, M.L.; Kuklin, A.I.; Plestil, J.; Haramus, V.; Islamov, A.H.; Erhan, R.; Anitas, E.M.; Lozovan, M.; Tripadus, V.;
Petrescu, C.; Savu, D.; Savu, S; Bica, I – Microstructure of magnetite doped elastomers investigated by SAXS and SANS,
JOURNAL OF OPTOELECTRONICS AND ADVANCED MATERIALS Volume: 10 Issue: 11 Pages: 2932-2935 Published:
NOV 2008, WOS:000261348200020
11
Small-angle neutron scattering in structure research of magnetic fluids
MV Avdeev, VL Aksenov - Physics-Uspekhi, 2010 - iopscience.iop.org
Abstract A magnetic fluid (MF) is a liquid dispersion of magnetic nanoparticles coated by surfactants for stabilization. The MF
research reviewed in this paper is primarily aimed at investigating the atomic and magnetic structure of MF particles and the
way they interact ...
Microstructure of stomaflex based magnetic elastomers
M Balasoiu, ML Craus, EM Anitas, I Bica, J Plestil… - Physics of the Solid …, 2010 - Springer
Abstract Stomaflex elastomers filled with two types of magnetic particles (nano-and micro-sized) were investigated. It was
observed that doping with Fe 3 O 4 nanoparticles and applying a magnetic field during the polymerisation process led to a
significant change in ...
Synchrotron and neutron-scattering methods for studies of properties of condensed matter: Competition or complementarity?
AV Belushkin, DP Kozlenko, AV Rogachev - Journal of Surface …, 2011 - Springer
Abstract Comparative analysis of modern possibilities of synchrotron-radiation and neutron-scattering methods for studies of
collective excitations, atomic and magnetic structure of condensed matter is presented in this review. The opportunities for
research using ...
[PDF] Small-angle neutron scattering analysis of the microstructure of stomaflex creme—ferrofluid based elastomers
EM Anitas, M Balasoiu, I Bica, VA Osipov… - Optoelectronics and …, 2009 - researchgate.net
Magnetic elastomers represent a new type of composites, consisting of nano/micro sized magnetic particles dispersed in a
polymer matrix. The main advantage of these composites resides in the possibility of combining physical properties of the
constituents to obtain new ...
FITTER. The package for fitting a chosen theoretical multi-parameter function through a set of data points. Application to experimental data
of the YuMO spectrometer
AG Soloviev, TN Murugova, AH Islamov… - Journal of Physics: …, 2012 - iopscience.iop.org
Abstract Fitter is a C++ program aimed to fit a chosen theoretical multi-parameter function through a set of data points. The
method of fitting is chi-square minimization. Moreover, the robust fitting method can be applied in Fitter. Fitter was disigned to
be used for a small- ...
Heat affected zones in polymer laser marking
ID Savu, SV Savu, NA Sirbu - Journal of Thermal Analysis and Calorimetry, 2014 - Springer
Abstract Laser marking is based on the laser heating of the subjected material, the heating being below the melting
temperature or thermal degradation starting point. Within and nearby the mark, the material is chemically, physically and
mechanically affected. This ...
Magnetic field and particle concentration competitive effects on ferrofluid based silicone elastomer microstructure
M Balasoiu, VT Lebedev, DN Orlova, I Bica - Crystallography Reports, 2011 - Springer
Abstract Structural peculiarities of ferroelastomers composed of polydimetylsiloxane with embedded magnetite particles
during polymerization have been studied by small-angle neutron scattering. The effects of ferroparticles' concentration in the
range of C= 0–6 wt%, ...
SANS investigation of a ferrofluid based silicone elastomer microstructure
Page 15 / 19
Curriculum Vitae
5
M Balasoiu, VT Lebedev, DN Orlova… - Journal of Physics: …, 2012 - iopscience.iop.org
Abstract Structural peculiarities of ferroelastomers composed of polydimetylsiloxane with magnetite particles embedded
during polymerization are studied by small-angle neutron scattering. The effects of ferroparticle concentration in the range up
to 6 mass.%. and ...
Structural organization of nanomaterials and nanosystems: neutron scattering insight
AV Belushkin, DP Kozlenko - Advances in Natural Sciences: …, 2010 - iopscience.iop.org
Abstract An overview of the studies of structural characteristics of nanomaterials and nanosystems, performed by neutron
scattering methods, is presented. The considered examples include optically active oxide materials, biological systems and
solutions for ...
[PDF] Particle concentration effects on the ferrofluids based elastomers microstructure
M Balasoiu, I Bica, YL Raikher, EB Dokukin… - … And Advanced Materials …, 2011 - jinr.ru
Magnetic elastomers (MEs) represent a specific class of smart materials responding in a complicated way to the changes of
external conditions. MEs are composed of magnetic nanoparticles and a low magnetic permeability polymer matrix. These
composites are ...
[HTML] Composite magnetorheological elastomers as dielectrics for plane capacitors: Effects of magnetic field intensity
M Balasoiu, I Bica - Results in Physics, 2016 - Elsevier
Abstract The fabrication of composite magnetorheological elastomers (MRECs) based on silicone rubber, carbonyl iron
microparticles (10% vol.) and polyurethane elastomer doped with 0%, 10% and 20% volume concentration TiO 2
microparticles is presented. The ...
Fractal fragmentation and small-angle scattering
Abstract The small-angle scattering form factor of a three-dimensional idealized fragmentation model based on the concept of
renormalization is calculated. The system consists of randomly oriented microscopic fractal objects whose positions are ...
[PDF] Microstructure of dimethylsiloxane based magnetic elastomers
M Balasoiu, ML Craus, EM Anitas, I Bica, J Plestil… - 2009 - jinr.ru
The interest in rubber-like smart active material devices in recent years stimulates an increasing number of efforts in both
basic and applied research aspects for new elastomer technology. Magnetic elastomers belong to a specific class of socalled
smart materials ...
[PDF] оияи.
M Balasoiu - iaea.org
The interest in rubber-like smart active material devices in recent years stimulates an increasing number of efforts in both
basic and applied research aspects for new elastomer technology. Magnetic elastomers belong to a specific class of socalled
smart materials ...
Magnetic system for small angle neutron scattering investigations of nanomaterials at YuMO-SANS instrument
AI Kuklin, M Balasoiu, SA Kutuzov… - Journal of Physics: …, 2012 - iopscience.iop.org
Abstract SANS measurements using unpolarized neutron beams are able to provide quantitative information on the magnetic
microstructure and the magnitude and microstructure of the magnetic anisotropy of nanomagnetic materials. A new
magnetic ...
Joint Institute of Nuclear Research, Dubna, Russia 3 West University of Timisoara, Department of Electricity and Magnetism, Timisoara,
Romania 4 …
M Balasoiu, I Bica, YL Raikher, J Kohlbrecher…
I.D. Savu, I. Ciupitu, V. Birdeanu, Savu S.V. – Laser welding of low friction nanostructured sintered composites – technical
and environmental aspects, (2010) International Journal of Microstructure and Materials Properties, 5 (2-3), pp. 261-275, DOI:
10.1504/IJMMP.2010.035944
3
6
7
[PDF] Technological system for studying the pulsed LASER-microTIG hybrid welding process dynamics
VTI BÎRDEA, C CIUCA - 2010 - researchgate.net
Abstract. The paper presents a laboratory technological system designed and realized for studying the pulsed LASERmicroTIG hybrid welding process dynamics. The particularities of this new hybrid laser-arc welding process variant required to
design and realize new ...
[PDF] Laser Marking of Metal Matrix Composite Materials
V Bîrdeanu, A Puicea - Proc. of The 3rd International Conference …, 2009 - researchgate.net
International Conference – Innovative technologies for joining advanced materials – tima09 ... Laser Marking of Metal Matrix
Composite Materials ... V. Bîrdeanu, A. Puicea National R&D Institute for Welding and Material Testing, 30 Mihai Viteazul Bv,
300222 Timisoara, Romania ...
share of laser ...
Savu, S.V, Mangra, G., Ciupitu, I., Savu, I.D., Gherasim, N. – Thermal field analysis in microwave sintering process of barium
ferrites for ping-pong table’s sensor.
Researches regarding elaboration of barium hexa-ferrite from microwave heating, Solid State Phenomena Vol. 188 (2012) pag. 369-375
valabil on-line din 2012/Mai/14 at www.scientific.net © (2012) Trans Tech Publications, Switzerland,
DOI:10.4028/www.scientific.net/SSP.188.369
Savu, I.D., S. Savu, A. Sirbu - Heat affected zones in polymer laser marking, J Therm Anal Calorim (2013), DOI:
10.1007/s10973-013-3443-2
1
8
Electrically controllable liquid crystal component for efficient light steering
Page 16 / 19
Curriculum Vitae
Ionel Dănuț SAVU
X Shang, JY Tan, O Willekens, J De Smet… - Photonics Journal, …, 2015 - ieeexplore.ieee.org
Abstract: In this article we present an electrically controllable micro-optical component for light beam steering and light
intensity distribution, built on the combination of nematic liquid crystal (LC) and polymer micro prisms. Polymer micro prism
arrays are fabricated using ...
Thermal studies on benzamide and benzanilide grafted LDPE
V Parthasarathy, V Dhanalakshmi… - Journal of Thermal …, 2015 - Springer
Abstract Low density polyethylene (LDPE) was melt grafted with two different functionalities namely amide and anilide in an
inert atmosphere at 160° C under different experimental conditions by thermolysis method and the order of the
functionalization reaction was ...
[PDF] Contours Identification in Modelling Facial Silicone Epistasis
S Rosu, NA Sirbu, RF Tatu - MATERIALE PLASTICE, 2014 - researchgate.net
To achieve a modeling of the epithesis as close as possible to the lost organ, information on its size and shape can be
registered by using computed tomography and 3D reconstruction. This paper aims to investigate to what extent the recording
geometry of facial regions ...
[PDF] A Comparative Study of Laser Induced Plasma Micro-Machining and Laser Ablation of Low Melting Point Polymers
I Saxena - conf.papercept.net
Surface texturing and modification of polymer materials has been employed for critical applications in the field of biomedical
devices [1], photonics devices [2], MEMS and microfluidics [3, 4]. Particularly, bio-degradable polymers have been recently
used for ...
Reverse replication of circular micro grating structures with soft lithography
X Shang, J Missinne… - 31st European …, 2015 - proceedings.spiedigitallibrary.org
abstract In this work, the reverse replication of circular micro grating structures on glass substrates is implemented using an
ultra-violet curable resin and a polydimethylsiloxane (PDMS) mold which has the same structure as the original circular
grating master. Two ...
http://www.scopus.com/results/citedbyresults.url?sort=plf-f&cite=2-s2.084893068745&src=s&imp=t&sid=706B16F354131CF21F2D2DD439851F39.aXczxbyuHHiXgaIW6Ho7g%3a570&sot=cite&
sdt=a&sl=0&origin=resultslist&editSaveSearch=&txGid=706B16F354131CF21F2D2DD439851F39.aXczxbyuHHiXgaIW6Ho
7g%3a57
8
Electrically Controllable Liquid Crystal Component for Efficient Light Steering
Shang, X., Tan, J.-Y., Willekens, O., (...), Thienpont, H., De Smet, H.
2015 IEEE Photonics Journal 7 (2), 7039254
Reverse replication of circular micro grating structures with soft lithography
Shang, X., Missinne, J., Teigell Beneitez, N., (...), Thienpont, H., De Smet, H.
2015 Proceedings of SPIE - The International Society for Optical Engineering
Thermal studies on benzamide and benzanilide grafted LDPE
Parthasarathy, V., Dhanalakshmi, V.,Anbarasan, R.
2015 Journal of Thermal Analysis and Calorimetry
Research on mechanical strength of technological fluid storage tank made of polyester resin reinforced with fiberglass
Tokar, A., Negoitescu, A., Adam, M.,Tokar, D.
2014 Materiale Plastice 51 (4), pp. 432-434
I.D. Savu, S.V. Savu, G. Sebeș - Preheating and heat addition by laser beam in hybrid laser-US welding, J Therm Anal
Calorim (2013), 111:1221-1226, DOI: 10.1007/s10973-012-2449-5, 1388-6150
1
9
10
Laser-heating wire bonding on MEMS packaging, AIP ADVANCES, Volume: 4, Issue: 3, 2014, DOI: 10.1063/1.4867100
Ciupitu, I., Benga, G., Ionescu, A., Savu, I.D. - The improving of the process of the iron, the cast iron and the copper powder
mixing
Cited by DOI:10.4028/www.scientific.net/AMR.1036.24
Microwave Differential Thermal Analysis Technique of the Fe2O3+BaCO3 homogeneous mixture, Advanced Materials Research Vol. 1036
in 2014
Savu, I.D., S.V. Savu, I. Ciupitu - Thermal Analysis to Evaluate Ageing Process in Heated Tool and Electrofusion Welding of
Polymer Pipes
1
1
Cited by DOI:10.4028/www.scientific.net/AMR.1036.24
Microwave Differential Thermal Analysis Technique of the Fe2O3+BaCO3 homogeneous mixture, Advanced Materials Research Vol. 1036
in 2014
Citations in BDI journals
No.
1.
2.
Articles
Citations
Savu, S.V., Mangra, G., Ciupitu, I., Savu, I.D., Gherasim N. – Thermal field analysis in microwave sintering process of barium
1
ferrites for ping-pong table’s sensor.
Technical and economic aspects at the conventional heating with electrical resistance and with microwave for differential thermal analysis of
the ceramic magnetic materials – publicat la lucrările CIER, www.imtoradea.ro
Balasoiu, M; Craus, M.L.; Kuklin, A.I.; Plestil, J.; Haramus, V.; Islamov, A.H.; Erhan, R.; Anitas, E.M.; Lozovan, M.; Tripadus, V.;
Petrescu, C.; Savu, I.D.; Savu, S; Bica, I – Microstructure of magnetite doped elastomers investigated by SAXS and SANS.
2
Structural organization of nanomaterials and nanosystems: neutron scattering insight – publicatînAdv. Nat. Sci.: Nanosci. Nanotechnol. 1
Page 17 / 19
Curriculum Vitae
(2010) 023002 (8pp), DOI: 10.1088/2043-6254/1/2/023002
Microstructure of dimethylsiloxane based magnetic elastomers – publicat în Joint Institute for Nuclear Research. Dubna, 2008
Savu, I.D., Savu, S.V., Birdeanu, V. - Microjoints for micro-electronical applications, Welding in the World, Volume 51, Issue
SPEC. ISS., 15 July 2007, Pages 403-410
3.
1
S. Savu – Imbinarea si microimbinarea in plasma de microunde a conductorilor electrici, Revista SUDURA, ISSN 1453-0384, B+, 2010, BDI
– PROQUEST, Serials Source List for CSA Technology Research Database
Reviewer of ISI Articles
2013:
Reviewer – 5 papers
10th Edition of the International Conference Structural Integrity of Welded Structures.
The Conference was organized by National R&D Institute for Welding and Material Testing - ISIM Timişoara,
Romanian Academy of Technical Sciences (ASTR) – Timişoara Subsidiary and "Politehnica” University of
Timişoara.
The conference proceedings were published in “Advanced Materials Research”, indexed by Elsevier SCOPUS, Ei Compendex, Thomson ISI, in
English.
The periodical is available in full text online at www.scientific.net.
2014:
Timişoara.
English.
2016:
Timişoara.
English.
Reviewer of BDI Articles
2014:
Reviewer – 1 paper
Journal Sudura, BDI
2015:
Journal Sudura, BDI
2016:
Journal Sudura, BDI
Member of doctoral commissions
2012:
2014:
PhD student Gheorghe Predescu
Prof. Mihail Mangra
PhD student Maria BUF (Miclău)
Prof. Mihail Mangra
Diploma, medals
Year
2015
Domain
Engineering
Paper: „PROCESE DE MICROIMBINARE A
ELEMENTELOR DE CIRCUIT ELECTRIC”
http://www.asr.ro/index.php/concursuriasr/promovare-sudare
Diploma, medal
Prize: „Promoting welding
by knowledge”
Event
ASR Annual Meeting
2014
Engineering
D. Savu, S. Savu, A. Sirbu - HEAT AFFECTED
Meritus Diploma
PN-II-RU-PRECISI-2014-8-7134
Page 18 / 19
Ionel Dănuț SAVU
Curriculum Vitae
ZONES IN POLYMER LASER MARKING, J Therm
Anal Calorim (2013), DOI: 10.1007/s10973-0133443-2
2000
1993
Engineering
Two wires GMA welding
Materials
Materials Resistance
Meritus Diploma for the high
level research
Diploma of Mention
Research Hall TIB 2000
Professional contest “Traian Lalescu” University
“Politehnica” of Timişoara, Fac. of Mechanics
Page 19 / 19

Cv_en - Universitatea din Craiova

Transcription

Similar documents

Allgemeine Musterseite

Semințe de legume

16-2011 EN 15085 - Schweizerischer Verein für Schweisstechnik