KITURAMI TURBO OIL BOILER

KITURAMI
TURBO OIL BOILER
TURBO PLUS 17/21/25/30 D
TURBO
TURBO
TURBO
TURBO
PLUS
PLUS
PLUS
PLUS
- 17D (19.8kW)
- 21D (24.4kW)
- 25D (29.1kW)
- 30D (34.9kW)
CTX-1500GRT
CTR-5500GR
1
[ INDEX ]
03 Precautions for safety
04 Check the following before start-up
05 Features
07 Major Conponents and Their Names
10 How to operate the boiler
14 Cautions during operation
17 Servicing the boiler
18 Boiler Management
19 Maintenance of Boiler
20 Installation Method
24 Trubleshooting
27 Specification
2
3
4
5
■ DHW System (Foced convection by circuration pump)
☞ POINT 1
◆ Anti-corrosion effect in pure
cupper
☞ POINT 2
◆ Feed back system in DWH. inlet
6
■ TURBO OIL BOILER PLUS MODEL
AIR VENT
PRESSURE GAUGE
AUTO SENSOR IN COOL WATER
FILTER IN HEATING LINE
EXPANSION TANK
SUPPLY VALVE
LINE COOL WATER
MAIN CONTROLER
LINE COOL WATER
ELECTRONIC PUMP
OR GEAR PUMP
SUPPLY PUMP &
CIRCURATION PUMP
OIL BUNER
DRAIN OR
HEATING RETURN
3 WAY VALVE
HEATING RETURN
HEATING SUPPLY
TURBO PLUS -17
TURBO PLUS -21/25/30
7
■ CONTROLER [ CTX-1500GRT ]
2
3
4
5
WATER TEMP.
순
환
CIRCULATION
버
너
BURNER
원
전
POWER
OIL
COMPUTER
TOTAL
CONTROL
전원/재가동
POWER/RESET
켜짐(ON)
1
꺼짐(OFF)
NO
items
Fuction
1
Poewr Switch
Main Power ON/OFF Switch
2
Boiler Temp. LED
indicate Heating Water Temp.
3
Circuration LED
indicate Pump operation
4
Burner LED
indicate Burner operation
5
Power LED
indicate Electonic Power
8
9
10
11
12
13
14
15
16
17
18
Maintenance of Boiler
※ Receive regular inspection by once or twice a year
※ clean the boiler as example as used to brush
flue
cover
silencer
Wipe out plumbling by steel brush
Wipe out plumbling by steel brush
Remove sludge and
moisture in oil tank
Change a filter by once
or twice a year
Wipe out plumbling by steel brush
※ Caution : Clean the boiler when stop completely!!!
19
Installation Method
Secure space for maintenance
Secure at least 60cm from the wall and 60cm from the
ceiling respec tively
Identify drain in boiler
● 보일러 가동중에 에어벤트에서 물이 일부 토출될 수
Connect
a drain
outlet of safty valve
있으니 바닥
까지 -hose
호스를 and
연결해the
주세요.
Connect
a drain
-hose
and
the합니다.)
outlet of air vent
(이때 에어가
원활히
빠질지
있어야
● 보일러 안전변에 드레인을 바닥 하수관까지 호스를
이용하여 연결해 주세요.
Installate horizontality a boiler
Do not fill up the hole where is situated the bottom
20
Installation Method
○ Electromagnetic pump (TURBO PLUS - 17D)
: 오일탱크를 전자펌프보다 반드시 높게 설치 하여 주세요.
※ ※주의
installate
a higher oil tank than the eltromagnetic pump.
①
electomagnetic pump
④
oil hose
②
oil filter
⑩
extension nipple
③⑤
hose bend
○ Gear pump (TURBO PLUS - 21/25/30D)
Connecting method of oil line
[ No more than 4m !! ]
Gear pump
[ No more than 6m !! ]
Gear pump
de-oiler
tank
filter
filter
6m
Single pipe system
tank
Check
4m
Double pipe system
Oil tank is higher than the gear pump : single or double pipe system
Oil tank is lower than the gear pump : double pipe system
There is possible that the boiler cause a incorrect operation if the
연결이
부정확하면
가동에 문제가 발생할 수 있습니다.
connection
is 보일러
inaccurate
21
Installation Method
Exhaust pipe istallation
exhaust pipe
install the chimney with a slope of 5
degree for preventing from back of
condensed water and rain
CAUTION!!!!
○ Installation length of the maximum extension pipe of FE
flue is whthin 5m and bending of pipe is less than 3 elbows.
○ The top of chimney must be escape from windzone ,
and be not in fluenced by strong wind and rain.
○ The top of chimney keeps away from building and obstracles.
※ If you install the chimney in the windzone
it can make soot , low efficiency
imperfect combusion
22
Installation Method
Check whether the oil supply valve is closed or tank is empty
23
24
25
26
Specification
items
UNIT
TURBO-17D
TURBO-21D
TURBO-25D
TURBO-30D
2.2
2.7
3.1
4.1
Out put
Fuel consumption
Heating surface
Efficiency
Max pressure
2.5
Water storage
S
P
E
C
Heating inlet
25
Heating outlet
25
DHW inlet/outlet
Drain
Chimney con.
Power
Pump
27