Skutt Electric Kilns - Greenbarn Potters Supply Ltd.

2016 Edition
Catalog prices are subject to change.
Skutt Electric Kilns
Skutt Kilns are known for their solid construction, energy efficient features, and reasonable pricing. They are available in
a wide range of sizes and electrical configurations. Featured below are some of the most popular Skutt models. All Skutt
Kilns are CSA approved and feature a rugged stainless steel jacket. The sectionalized construction gives fast access to
to elements and firebricks for repair, and allows one person to transport a kiln and get through narrow doorways. For
ease in firing, every KS kiln comes with an installed Kiln Sitter. For automated firing, Skutt offers the KM models with
KilnMaster automatic controller. Two year limited warranty. A brochure is available for all models.
Skutt KS 818-3 and KM 818-3
A good small kiln designed for the home potter or small studio loads,
the 818-3 can be fired to Cone 10. Reliable and long-lasting. Features
3" firebrick for better insulating properties, faster heat build-up,
and even heat distribution from top to bottom. Plugs into a standard 240V wall socket, draws 26.7 amps and 6400 watts. A 40 amp
breaker is recommended.
Skutt KS 1018-3 and KM 1018-3
The 1018-3 offers nearly twice the volume of the 818-3. It is a low,
wide, easy-loading kiln especially designed for convenience and accessibility. Fires to Cone 10. Chamber has a 22.75" opening and is
18" deep, for a capacity of 4.38 cu. ft. Electrical requirements are 240
volts, 38.5 amps, and 9250 watts. A 60 amp .breaker is recommended.
Skutt KS 1027-3 and KM 1027-3
The Cone 10 Skutt 1027-3 is the answer for large studio loads, schools,
and the serious amateur who wants professional capacity. The volume is
6.57 cu. ft. This model has chamber dimensions of 22.75" opening, 27"
depth, and a capacity of 6.57 cu. ft. It draws 11520 watts at 240 volts and
48 amps. A 60 amp breaker recommended.
Skutt Kilns
Kilns & Accessories, Page 1
2016 Edition
Catalog prices are subject to change.
Skutt Electric Kilns
Skutt KS 1227-3 and KM 1227-3
If you're looking for a full-size electric kiln, the Skutt
1227-3 will meet your needs. It has a load capacity of 9.9
cubic feet, making it ideal for schools, community centres,
and professional studios. This kiln is rated to Cone 8, and
has 3" firebrick. The chamber is 27" deep, has an opening
of 28", and a capacity of 9.92 cu. ft. The electrical specifications are 240 volts and 48 amps for a power draw of
11520 watts. A 60 amp breaker is recommended.
Skutt KS Kilns: with kiln sitter and timer
Internal Dimensions
Price
Width
Depth
Cubic feet
Maximum
Cone Temp.
KS 818-3
$ 2105.00
16.50"
18"
2.35
10 2350°F
160 lbs.
KS 1018-3
$ 3210.00
22.75"
18"
4.38
10 2350°F
275 lbs.
KS 1027-3
$ 3995.00
22.75"
27"
6.57
10 2350°F
290 lbs.
KS 1227-3
$ 4625.00
28.00"
27"
9.92
8 2300°F
400 lbs.
Model
Phase and Voltage Notes:
Voltage: The standard electric kiln will require 240 single ......
phase voltage. These are the kilns we stock. Some schools and
large buildings may require a 208 volt system. This is a special
order from the factory, but at no extra cost. We will check your
electrical requirements with you before we fill an order.
Phase: Some large buildings have a three phase system. In most
cases a single phase kiln can be wired into a 3 phase system. Not
all Skutt kilns are available in a 3 phase version. 3 Phase mod is
an additional charge.
Weight
• The kilns listed above are thickwalled kilns with 3" firebrick for extra insulation. They include a kiln sitter with
timer as standard equipment.
• Note that electrical plugs are NOT included with 1027-3
and 1227-3 kiln models. For these models, Skutt suggests
hard-wiring the kiln into your electrical system instead of
using a plug/receptacle.
Greenbarn does NOT sell the plugs separately.
• Replacement Skutt Peephole plugs..................... $7.25
• Replacement Softbrick peephole plugs............... $7.35
• 3 Phase Modification for KS Kilns.................. $430.00
Note: for Electrical requirements:
- see 3rd page following
Skutt Kilns: Manual (KS) Version
Note: KS and/or KM1227-3 kiln. When ordered in single
phase, 208 volt specification, it will fire ONLY to a max. of
cone 5 due to electrical limitations. For a 1227-3 kiln that
goes to cone 10, see the PK type kilns on following page.
Kilns & Accessories, Page 2
2016 Edition
Catalog prices are subject to change.
Skutt KilnMaster Electric Kilns
Since Skutt introduced their KilnMaster controller, we have found
them to grow rapidly in popularity amongst all users. With the
KilnMaster you get excellent temperature control, flexible firing
programs, convenience, and repeatable results. Use the preset firing
programs, or customize your own with the ramp/hold mode. With
options to display in either Celcius or Farenheit, a programmable
audible alarm , and the option to select a delay for the start of your
firing, you can finish firing when it's convenient for you. All Skutt
10 and 12 sided kilns come standard with the Lid Lifter feature, and
the Easy View touch pad option can be added to any KM kiln . A
brochure is available.
• Sophisticated Cone Firing Mode
Kilnmaster calculates when proper heat work has been achieved.
You select the desired Cone and one of three firing speeds, depending on your load.
• Programmable Ramp/Hold Mode
Up to 16 firing segments can control temperature change, end temperature, and holding time.
• Preheat and Cooling Functions
Easily enter preheating segments (180*F soaks) to ensure dry ware.
Cool down from your desired cone with control, new features allow
you to control your rate of cooling to achieve certain glaze effects.
Skutt KM1027 with factory installed KilnMaster controller
• Safety & Diagnostic Features
Power failture detection, thermocouple failure detection, microprocessor fault detection. New onboard diagnostic tools allow you to
determine if an element needs replacing, and monitor your voltage
supply.
Skutt KM Kilns: with automatic controller
Model
New ~>
Price
Internal Dimensions
Width
Depth Cubic feet
Maximum
Cone Temp.
Weight
Firebox 8x6LT $1155.00
8" x 8"
6.5"
.22
6 2250°F
KM-818-3
$2560.00
16.50"
18"
2.35
10 2350°F
160 lbs.
KM-822-3
$2735.00
16.50"
22"
2.90
10 2350°F
180 lbs.
KM-1018-3
$3505.00
22.75"
18"
4.38
10 2350°F
275 lbs.
KM-1022-3
$3875.00
22.75"
22"
5.25
10 2350°F
300 lbs.
KM-1027-3
$4280.00
22.75"
27"
6.57
10 2350°F
320 lbs.
KM-1218-3
$4165.00
28.13"
18"
6.60
10 2350°F
330 lbs.
KM-1222-3
$4525.00
27.00"
22"
8.10
10 2350°F
365 lbs.
KM-1227-3
$4925.00
27.00"
27"
9.92
8 2300°F
400 lbs.
KM-1227-3PK $5795.00
27.00"
27"
9.92
10 2350°F
410 lbs.
KM-1231-3PK $5970.00
27.00"
31"
11.60
10 2350°F
450 lbs.
KM-1627-3PK $9570.00
46 x30.75" 27"
18.50
10 2350°F
535 lbs.
Options for KM Kilns:
Type "S" thermocouple (per t/c)...................................$380.00
3 Phase Mod, KM Kilns.................................................$75.00
Easy View Panel ............................................................$52.00
Kiln Venting ..................................................$ please see page 17
Skutt Kilns: Computer (KM) Version
58 lbs. (3 button control)
Note: KS and/or KM1227-3 kiln. When ordered in single
phase, 208 volt specification, it will fire ONLY to a max. of
cone 5 due to electrical limitations. For a 1227-3 kiln that
goes to cone 10, see the PK type kilns on following page.
Kilns & Accessories, Page 3
2016 Edition
Catalog prices are subject to change.
Skutt Kilns -
Wall mount controllers
- Separate automatic controllers: mount on the wall beside the kiln (pricing does not include CSA)
KM-1 controller
$ inquire- single phase, 50 amp controller
- these controllers are special order items
KM-1 controller
$ inquire- 3 phase, 40 amp controller - these controllers are special order items
Phase ,Voltage , and Plug Notes:
Voltage: The standard electric kiln will require 240 single ......
phase voltage. These are the kilns we stock. Some schools and
large buildings may require a 208 volt system. This is a special
order from the factory, but at no extra cost. We will check your
electrical requirements with you before we fill an order.
Internal note: CLEARANCES: (recommended by U.S.
manufacturer: Skutt)
- 18" clearance recommended to non-combustible wall and 36"
clearance recommended to combustible wall
- check with your locall regulations for your local municipal
requirements.
- note: gyproc is rated as combustible surface. install Duroc
cement board (wonderboard) 1/4" on wall to get back to 18"
clearance.
Phase: Some large buildings have a three phase system. In most
cases a single phase kiln can be wired into a 3 phase system. Not
all Skutt kilns are available in a 3 phase version. 3 Phase mod is
an additional charge.
• Note that electrical plugs are NOT included with 1027-3 and 1227-3
kiln models. For these models, Skutt suggests hard-wiring the kiln
into your electrical system instead of using a plug/receptacle.
We do NOT sell the plugs separately. Electrician will normally supply
the plug/receptacle when installing the kiln.
Skutt Kilns: Notes
Kilns & Accessories, Page 4
2016 Edition
Catalog prices are subject to change.
Skutt Kilns - Electrical Specifications: 3" wall kilns
Model
Cone
Phase
Volts Amps Watts Breaker
Notes
KM models: automatic
KM 818-3
10
10
single phase
single phase
240v
208v
27.8
26.7
6660
5550
40 amp
40 amp
note: 3 phase not available on KM818-3 model
KM 822-3
10
10
single phase
single phase
240v
208v
33.4
38.5
8000
8000
50 amp
50 amp
note: 3 phase not available on KM822-3 model
KM 1018-3
10
10
single phase
single phase
240v
208v
39.4
40.0
9460
8320
50 amp
50 amp
note: 3 phase not available on KM1018-3 model
KM 1022-3
10
10
10
10
single phase
single phase
3 phase 3 phase
240v
208v
240v
208v
48.0 11500
48.0 9984
34.6 11500
34.6 11500
60 amp
60 amp
50 amp
50 amp
KM 1027-3
10
10
10
10
single phase
single phase
3 phase 3 phase
240v
208v
240v
208v
48.0 11520
48.0 9980
29.3 11520
31.7 11000
60 amp
60 amp
40 amp
40 amp
KM 1218-3
10
10
single phase
single phase
240v
208v
48.0 11500
48.0 9984
60 amp
60 amp
note: 3 phase not available on KM1218-3 model
KM 1222-3
10
10
10
10
single phase
single phase
3 phase 3 phase
240v
208v
240v
208v
48.0 11500
48.0 9984
34.6 11500
40.0 11500
60 amp
60 amp
- single phase, 208 volt is maximum cone 8 only
50 amp
50 amp
KM 1227-3
8
5
8
8
single phase
single phase
3 phase 3 phase
240v
208v
240v
208v
48.0 11520
48.0 9980
29.3 11520
31.7 11000
60 amp
60 amp
- single phase, 208 volt is maximum cone 5 only
40 amp
40 amp
PK models: Production kilns
KM 1227-3 PK 10
single phase
10
single phase
10
3 phase
10
3 phase
240v
208v
240v
208v
60.0
69.0
40.0
46.7
14300
14300
14300
14300
80 amp
90 amp
50 amp
60 amp
KM 1231-3 PK
240v
208v
240v
208v
72.0
80.0
44.5
51.5
17300 90 amp
16640 100 amp
17300 60 amp
17300 70 amp
10
10
10
10
KM1627PK
10
10
single phase
single phase
3 phase
3 phase
3 phase
240v
66
23600
90 amp
3 phase
208v
76
23600 100 amp
note: single phase version of this kiln NOT available yet
Also available: low fire version of Oval kiln: Rated to cone 1 only
KM1627-3 PK-LF single phase
240v
68
16300
single phase
208v
69
14300
3 phase
240v
46
16300
3 phase
208v
47
14300
90 amp
90 amp
60 amp
60 amp
- available 3 phase only at this time
- available 3 phase only at this time
- fires to cone 1 only
- fires to cone 1 only
- fires to cone 1 only
- fires to cone 1 only
ZC models: Zone Control
Currently available only on KM1027-3 model. Not available on KM1227-3 or on PK kilns.
Electrical specifications are the same as regular versions indicated above.
Note: For Copper wire sizes and NEMA receptacle configurations, please ask us or see the
Skutt kiln brochure at www.Skutt.com
Skutt Kilns: Electrical Specifications
Kilns & Accessories, Page 5
2016 Edition
Catalog prices are subject to change.
Skutt Glass Kilns - General specifications
Model
Price
Width
Glass kiln models: with KM controller
GM 10F with door
$1780.00
10"x 9"
GM 814
$2320.00
17.5"
GM 818
$2515.00
17.5"
GM 1014
$2620.00
23.5"
GM 22CS
$.......call
23.5"x 24.5"
GM 1018
$3015.00
23.5"
GM 1414
$4270.00
41.5"x 24.5"
GM 1227-3
$4815.00
28"
Also available:
GM 10F no door
$1645.00
Depth Cu.ft
Temp Weight
Notes
9"
13.5"
18"
13.5"
13.5"
18"
13.5"
27"
0.45
2.0
2.6
3.5
4.35
4.6
6.7
9.9
1800F
1800F
1800F
1800F
1800F
1800F
1800F
1800F
82 lb
150 lb
147 lb
174 lb
257 lb
196 lb
241 lb
351 lb
- with optional bead door
9"
0.45
1800F
82 lb
10"x 9"
- Not CSA approved
- lid lifter is included with this model
- lid lifter is included with this model
- without bead door
Note: for more information, please see Skutt website at www.skutt.com
Note: glass kilns are not available with kiln sitters. Available with controllers only.
Note: glass kilns are rated to maximum 1800 degrees F., which is about cone 06, as indicated in chart above.
Note: 208 volt available on some glass kilns only. see electrical chart below.
3 phase available on some glass kilns only. see electrical chart below.
Skutt Glass Kilns - Electrical Specifications
Model
Cone
Phase
Volts Amps Watts Breaker
Notes
Glass kiln models: with KM controller
GM 10F with door 06
single phase
GM 10F no door
06
single phase
115v
115v
15.0
15.0
1775
1775
20 amp
20 amp
note: only available 115 volt.
note: only available 115 volt.
GM 814
GM 814
06
06
single phase
single phase
240v
208v
27.8
32.0
6660
6660
40 amp
40 amp
note: 3 phase not available on GM 814 model
GM 818
GM 818
06
06
single phase
single phase
240v
208v
27.8
26.7
6660
5550
40 amp
40 amp
note: 3 phase not available on GM 818 model
GM 1014
GM 1014
06
06
single phase
single phase
240v
208v
34.0
39.1
8140
8140
50 amp
50 amp
note: 3 phase not available on GM 1014 model
GM 22CS
GM 22CS
GM 22CS
GM 22CS
06
06
06
06
single phase
single phase
3 phase
3 phase
240v
208v
240v
208v
31.0
35.8
17.9
20.7
7450
7450
7450
7450
40 amp
40 amp
30 amp
30 amp
GM 1018
GM 1018
06
06
single phase
single phase
240v
208v
39.4
40.0
9460
8320
50 amp
50 amp
GM 1414
GM 1414
GM 1414
GM 1414
06
06
06
06
single phase
single phase
3 phase
3 phase
240v
208v
240v
208v
34.7
40.0
20.0
23.1
8320
8320
8320
8320
50 amp
50 amp
30 amp
30 amp
GM 1227-3
GM 1227-3
GM 1227-3
GM 1227-3
06
06
06
06
single phase
single phase
3 phase
3 phase
240v
208v
240v
208v
48.0 11520
48.0 9980
29.3 11520
31.7 11000
Skutt Kilns: Electrical Specifications
note: 3 phase not available on GM 1018 model
60 amp
60 amp
40 amp
40 amp
Kilns & Accessories, Page 6