4951Trade Street Integrated PV Storage System

Transcription

UNIVERSITY OF CALIFORNIA, SAN DIEGO
BERKELEY• DAVIS• IRVINE• LOS ANGELES• MERCED• RIVERSIDE• SAN FRANCISCO
OFFICE OF THE ASSOCIATE VICE CHANCELLOR
CAMPUS ARCHITECT · FACILITIES DESIGN & CONSTRUCTION
TEL: (858) 534-2177
FAX: (858)534-4363
UCSD
SANTA BARBARA• SANTA CRUZ
9500 GILMAN DRIVE #0916
LA JOLLA, CALIFORNIA 92093-0916
December 17, 2015
TO:
ALL HOLDERS OF BIDDING DOCUMENTS
TRADESTREETINTEGRATEDPVSTORAGESYSTEM
PROJECT NO.: W4951/A4L-402/1000465759
Enclosed are the following:
I.
Addendum No. 1 dated December 17, 2015 to the Construction Documents.
2.
Revised Supplementary Instructions dated December 17, 2015.
3.
Revised Bid Form dated December 17, 2015
4.
Revised Agreement dated December 17, 2015
5.
Additional Specification Section: 01240
6.
Consolidated Questions and Answers
7.
Revised Drawings dated December 16, 2015
THE BID DUE DATE REMAINS THE SAME: 2:00 P.M., THURSDAY, DECEMBER 22 2015.
Senior Director of Construction Services
Facilities Design and Construction
Enclosures
TRADE STREET INTEGRATED PV STORAGE SYSTEM
PROJECT NO. W4951/A4L-402/1000465759
ADDENDUM NO. ONE
TO THE
CONSTRUCTION DOCUMENTS
DECEMBER 17, 2015
General:
The following changes, additions or deletions shall be made to the following
documents; all other conditions shall remain the same.
I.
SPECIFICATIONS
Item#
1.
SUPPLEMENTARY INSTRUCTIONS TO BIDDERS
Delete the Supplementary Instructions to Bidders in its entirety and substitute the
enclosed Supplementary Instructions to Bidders dated 12/17/15.
Please note that the basis of award has been revised. Refer to Section 9 of the
revised Supplementary Instructions to Bidders.
2.
BID FORM
Delete the Bid Form in its entirety and substitute the enclosed Bid Form dated
12/17/15.
3.
AGREEMENT
Delete the Agreement in its entirety and substitute the enclosed Agreement dated
12/17/15.
4.
SECTION 01240. UNIT PRICES
Add enclosed new Section 01240 Unit Prices
II.
QUESTIONS AND ANSWERS
Item#
1.
Contractor questions with University answers.
II
DRAWINGS
Item#
1.
REVISED SHEETS
A.
Delete the Plans in its entirety and substitute the enclosed Plans dated
12/16/15.
UCSD - FD&C
Page 1 of 1
Project No.: W4951/A4L-402/1000465759
SUPPLEMENTARY INSTRUCTIONS TO BIDDERS
1.
Contract Time: 90 days.
2.
Requests for clarification or interpretation of the Bidding Documents shall be addressed only to:
ROSALIE PHAM
9500 GILMAN DRIVE, MC 0916
LA JOLLA, CA 92093-0916
(858) 534-5343
3.
A MANDATORY Pre-Bid Conference/Job Walk will be conducted on Monday, December 14, 2015
beginning promptly at 10:00 A.M. Only bidders who participate in the Pre-Bid Conference/Job
Walk in its entirety will be allowed to bid on the Project as prime contractors. For directions to the
Pre-Bid Conference/Job Walk contact Rosalie Pham, Principal Electrical Engineer, at (858) 5345343
4.
Bids will be received on or before the Bid Deadline and only at:
CONSTRUCTION CONTRACTS OFFICE
(AT THE FRONT COUNTER)
TORREY PINES CENTER SOUTH, STE. 465
10280 N. TORREY PINES ROAD
LA JOLLA, CALIFORNIA 92037
5.
Bids will be opened at the following location:
TORREY PINES CENTER SOUTH
SMALL CONFERENCE ROOM
10280 N. TORREY PINES ROAD
LA JOLLA, CALIFORNIA 92037
6.
Contractor will be assessed as liquidated damages the sum of $1,000.00 for each day the Work
remains incomplete beyond the expiration of the Contract Time. After Substantial Completion, the
rate for liquidated damages shall be reduced to the sum of $500.00 per day. See Article 5 of the
Agreement for detailed requirements.
7.
The Successful Bidder will receive two (2) sets of plans and specifications for use during
construction.
8.
Instructions to Bidders, Article 3, Bidding Documents
A.
Article 3.1.1
Delete Article 3.1.1 and substitute with the following:
"3.1.1 Bidders may obtain complete sets of the Bidding Documents from the issuing office
designated in the Advertisement For Bids for the fee stated therein, if any."
April 16, 2014
LF/BF/MP SUPP-IT
UCSD Rev. 5/12/2015
Supplementary Instructions to Bidders
Revised 12/17/15- Amendment 1
B.
Project No.: W4951/A4L-402/1000465759
Article 3.4
Add the following: "In addition, each bidder shall list in the Bid Form, the subcontractor for, Fire
Detection & Alarm System”
9.
Instructions to Bidders, Article 6, Consideration of Bids
A.
Article 6.3.3
Delete Article 6.3.3 in its entirety and substitute the following:
“6.3.3 University will determine the low Bidder on the basis of the sum of the Lump Sum
Base Bid plus all Unit Prices multiplied by their respective Estimated Quantities as
stated in the Bid Form, plus the daily rate for Compensable Delay multiplied by the
"multiplier" as stated in the Bid Form. The Contract Sum will be the sum of the Lump
Sum Base Bid.”
B.
Article 6.3.4
Delete Article 6.3.4 in its entirety and substitute the following:
The University will post the Bid results in a public place at the address where the Bids are
received or on the University’s website (www.fdc.ucsd.edu).
C.
Articles 6.3.5.1, 6.3.5.2, 6.3.5.3
Delete “Three” and substitute with “Two”
D.
Article 6.3.7, first sentence,
Delete “Three” and substitute with “Two”
10.
Article 6.3.9
Add the following paragraphs:
No contractor or subcontractor, regardless of tier, may be listed on a Bid for, or engage in the
performance of, any portion of this project, unless registered with the Department of Industrial
Relations pursuant to Labor Code section 1725.5 and 1771.1.
This project is subject to compliance monitoring and enforcement by the Department of Industrial
Relations.
April 16, 2014
LF/BF/MP SUPP-IT
UCSD Rev. 5/12/2015
Supplementary Instructions to Bidders
Project No.: W4951/A4L-402/1000465759
BID FORM
FOR:
LA JOLLA, CALIFORNIA
BID TO:
FACILITIES DESIGN AND CONSTRUCTION
10280 N. TORREY PINES ROAD, STE. 465
MAIL CODE 0916
LA JOLLA, CALIFORNIA 92093-0916
BID FROM:
(Name of Bidder)
(Address)
(City, State, Zip Code)
/
(Telephone Number)
(Fax Number)
(Date Bid Submitted)
Note: All portions of this Bid Form must be completed and the Bid Form must be signed before the Bid is
submitted. Failure to do so will result in the Bid being rejected as non-responsive.
April 29, 2015
LF/BF/MP-BF
1
Bid Form
1. 0
Project No.: W4951/A4L-402/1000465759
BIDDER’S REPRESENTATIONS
Bidder, represents that a) Bidder and all Subcontractors, regardless of tier, has the appropriate current and
active Contractor's licenses required by the State of California and the Bidding Documents; b) it has
carefully read and examined the Bidding Documents for the proposed Work on this Project; c) it has
examined the site of the proposed Work and all Information Available to Bidders; d) it has become familiar
with all the conditions related to the proposed Work, including the availability of labor, materials, and
equipment; e) Bidder and all Subcontractors, regardless of tier, are currently registered with the California
Department of Industrial Relations pursuant to California Labor Code Section 1725.5 and 1771.1. Bidder
hereby offers to furnish all labor, materials, equipment, tools, transportation, and services necessary to
complete the proposed Work on this Project in accordance with the Contract Documents for the sums
quoted. Bidder further agrees that it will not withdraw its Bid within 60 days after the Bid Deadline, and that,
if it is selected as the apparent lowest responsive and responsible Bidder, that it will, within 10 days after
receipt of notice of selection, sign and deliver to University the Agreement in triplicate and furnish to
University all items required by the Bidding Documents. If awarded the Contract, Bidder agrees to complete
the proposed Work within 90 days after the date of commencement specified in the Notice to Proceed.
2.0
ADDENDA
Bidder acknowledges that it is Bidder's responsibility to ascertain whether any Addenda have been issued
and if so, to obtain copies of such Addenda from University’s Facility at the appropriate address stated on
Page 1 of this Bid Form. Bidder therefore agrees to be bound by all Addenda that have been issued for
this Bid.
3.0
NOT USED
4.0
LUMP SUM BASE BID
$
,
,
.
(Place figures in appropriate boxes.)
5.0
SELECTION OF APPARENT LOW BIDDER
Refer to the Instructions to Bidders for selection of apparent low bidder.
April 29, 2015
LF/BF/MP-BF
2
Bid Form
6.0
Project No.: W4951/A4L-402/1000465759
UNIT PRICES
The quantities set forth in the Unit Prices are estimates. University does not represent that the actual
quantity of any Unit Price item will equal the Estimated Quantity stated below. University will perform the
extension of the Unit Price times the respective Estimated Quantity.
Unit Price for Battery Cell at 18kW each as specified in Section 01240
Estimated Quantity of units: Eleven (11)
$
,
.
Each
(Place Unit Price figures in appropriate boxes.)
7.0
DAILY RATE OF COMPENSATION FOR COMPENSABLE DELAYS
Bidder shall determine and provide below the daily rate of compensation for any Compensable Delay
caused by University at any time during the performance of the Work.
$
,
.
X
(Place figures in appropriate boxes.)
10
multiplier
Failure to fill in a dollar figure OF AT LEAST $1.00 for the daily rate for
Compensable Delay shall render the bid non-responsive.
University will perform the extension of the daily rate times the multiplier.
The daily rate shown above will be the total amount of Contractor entitlement for each day of Compensable
Delay caused by University at any time during the performance of the Work and shall constitute payment
in full for all delay costs, direct or indirect (including, without limitation, compensation for all extended home
office overhead and extended general conditions), of the Contractor and all subcontractors, suppliers,
persons, and entities under or claiming through Contractor on the Project. The number of days of
Compensable Delay shown as a "multiplier" above is not intended as an estimate of the number of days of
Compensable Delay anticipated by the University. The University will pay the daily rate of compensation
only for the actual number of days of Compensable Delay, as defined in the General Conditions; the actual
number of days of Compensable Delay may be greater or lesser than the "multiplier" shown above.
8.0
NOT USED
April 29, 2015
LF/BF/MP-BF
3
Bid Form
9.0
Project No.: W4951/A4L-402/1000465759
LIST OF SUBCONTRACTORS
BIDDING COMPANY’S NAME:
Bidder will use Subcontractors for the Work:
Yes
No
If “yes,” provide in the spaces below (a) the name, the location of the place of business, and the California
contractor license number of each subcontractor who will perform work or labor or render service to the
prime contractor in or about the construction of the work or improvement, or a subcontractor licensed by
the state of California who, under subcontract to the prime contractor, specially fabricates and installs a
portion of the work or improvement according to detailed drawings contained in the plans and specifications,
in an amount in excess of one-half of 1 percent of the prime contractor's total bid, (b) the portion of the work
which will be done by each subcontractor. The prime contractor shall list only one subcontractor for each
such portion as is defined by the prime contractor in its bid.
Portion of the Work
Activity
(e.g. electrical,
mechanical, concrete)
Subcontractor
Location of Business
(City)
Name of Business
License No.
Fire Detection & Alarm
System
(Note: Add additional pages if required.)
April 29, 2015
LF/BF/MP-BF
4
Bid Form
10.0
NOT USED
11.0
BIDDER INFORMATION
Project No.: W4951/A4L-402/1000465759
TYPE OF ORGANIZATION:
(Corporation, Partnership, Individual, Joint Venture, etc.)
IF A CORPORATION, THE CORPORATION IS ORGANIZED UNDER THE LAWS OF:
THE STATE OF
.
(State)
NAME OF PRESIDENT OF THE CORPORATION:
(Insert Name)
NAME OF SECRETARY OF THE CORPORATION:
(Insert Name)
IF A PARTNERSHIP, NAMES OF ALL GENERAL PARTNERS:
(Insert Names)
CALIFORNIA CONTRACTORS LICENSE(S):
(Classification)
(License Number)
(Expiration Date)
(For Joint Venture, list Joint Venture's license and licenses for all Joint Venture partners.)
12.0
REQUIRED COMPLETED ATTACHMENTS
The following documents are submitted with and made a condition of this Bid:
1.
Bid Security in the form of
(Bid Bond or Certified Check)
April 29, 2015
LF/BF/MP-BF
5
Bid Form
13.0
Project No.: W4951/A4L-402/1000465759
DECLARATION
I,
, hereby declare that I am the
(Printed Name)
of
(Title)
(Name of Bidder)
submitting this Bid Form; that I am duly authorized to execute this Bid Form on behalf of Bidder; and that
all information set forth in this Bid Form and all attachments hereto are, to the best of my knowledge, true,
accurate, and complete as of its submission date.
I further declare that this bid is not made in the interest of, or on behalf of, any undisclosed
person, partnership, company, association, organization, or corporation; that the bid is genuine and not
collusive or sham; that the bidder has not directly or indirectly induced or solicited any other bidder to put
in a false or sham bid, and has not directly or indirectly colluded, conspired, connived, or agreed with any
bidder or anyone else to put in a sham bid, or that anyone shall refrain from bidding; that the bidder has
not in any manner, directly or indirectly, sought by agreement, communication, or conference with anyone
to fix the bid price of the bidder or any other bidder, or to fix any overhead, profit, or cost element of the
bid price, or of that of any other bidder, or to secure any advantage against the public body awarding the
contract of anyone interested in the proposed contract; that all statements contained in the bid are true;
and, further, that the bidder has not, directly or indirectly, submitted his or her bid price or any breakdown
thereof, or the contents thereof, or divulged information or data relative thereto, or paid, and will not pay,
any fee to any corporation, partnership, company association, organization, bid depository, or to any
member or agent thereof to effectuate a collusive or sham bid.
I declare, under penalty of perjury, that the foregoing is true and correct and that this declaration was
executed at:
(Name of City if within a City, otherwise Name of County),
in the State of
, on
(State)
.
(Date)
________________________________________
(Signature)
April 29, 2015
LF/BF/MP-BF
6
Bid Form
Project No.: W4951/A4L-402/1000465759
AGREEMENT
THIS AGREEMENT is made as of the {
} day of {
}, 20{ }, between
THE REGENTS OF THE UNIVERSITY OF CALIFORNIA (“University”),
whose Facility is:
University of California, San Diego
whose address for notices is:
Facilities Design & Construction
10280 N. Torrey Pines Road, Ste. 470
Mail Code 0916
La Jolla, CA 92093-0916
and Contractor:
{Name}
{Street Address}
{City, State, Zip}
for the Project:
TRADE STREET INTEGRATED PV STORAGE
SYSTEM
La Jolla, CA 92093
University's Responsible Administrator:
Wm. Joel King, AIA
Assistant Vice Chancellor
and Campus Architect
University's Representative is:
Rosalie Pham, Principal Electrical Engineer
10280 N. Torrey Pines Road, Ste. 470
La Jolla, CA 92093-0916
Contract Documents for the
Work Prepared by:
June 6, 2011
Revision 4
LF:AGRMT
Randall Lamb Associates
4757 Palm Avenue
La Mesa CA, 91942
1
Agreement
Project No.: W4951/A4L-402/1000465759
University and Contractor hereby agree as follows:
ARTICLE 1 WORK
Contractor shall provide all work required by the Contract Documents (the “Work”). Contractor agrees to
do additional Work arising from changes ordered by the University pursuant to Article 7 of the General
Conditions. Contractor shall (1) pay all sales, consumer and other taxes and (2) obtain and pay for any
governmental licenses and permits necessary for the work, other than building and utility permits.
ARTICLE 2 CONTRACT DOCUMENTS
“Contract Documents” means the Advertisement For Bids, Instructions To Bidders, Supplementary
Instructions to Bidders, Bid Form, this Agreement, General Conditions, Supplementary Conditions,
Exhibits, Specifications, List of Drawings, Drawings, Addenda, Notice to Proceed, Change Orders, Notice
of Completion, and all other documents identified in this Agreement that together form the contract
between University and Contractor for the Work (the “Contract”). The Contract constitutes the complete
agreement between University and Contractor and supersedes any previous agreements or
understandings.
ARTICLE 3 CONTRACT SUM
Subject to the provisions of the Contract Documents University shall pay to Contractor, for the
performance of the Work, {$AMOUNT IN FIGURES} , the “Contract Sum.”
The Contract Sum includes the following Alternates accepted by University: N/A
Unit Prices, if any, are as follows:
{LIST ITEMS AND UNIT PRICES}
The Contract Sum will be increased by an amount equal to the Unit Price multiplied by the actual number
of units of each Unit Price item incorporated in the Work.
ARTICLE 4 CONTRACT TIME
Contractor shall commence the Work on the date specified in the Notice to Proceed and fully complete
the work within 90 days, the “Contract Time.”
By signing this agreement, Contractor represents to University that the Contract Time is reasonable for
completion of the work and that Contractor will complete the Work within the Contract Time. Time limits
stated in the Contract Documents are of the essence of the Contract.
ARTICLE 5 LIQUIDATED DAMAGES
If Contractor fails to complete the Work within the Contract Time, Contractor shall pay to University, as
liquidated damages and not as a penalty, the sum of $1,000 for each day after the expiration of the
Contract Time that the Work remains incomplete. After Substantial Completion, the rate for liquidated
damages shall be reduced to the sum of $500.00 per day. University and Contractor agree that if the
Work is not completed within the Contract Time, University's damages would be extremely difficult or
impracticable to determine and that the aforesaid amounts are reasonable estimates of and reasonable
sums for such damages. University may deduct any liquidated damages due from Contractor from any
amounts otherwise due to Contractor under the Contract Documents. This provision shall not limit any
right or remedy of University in the event of any other default of Contractor other than failing to complete
the Work within the Contract Time.
June 6, 2011
Revision 4
LF:AGRMT
2
Agreement
Project No.: W4951/A4L-402/1000465759
ARTICLE 6 COMPENSABLE DELAY
If Contractor is entitled to an increase in the Contract Sum as a result of a Compensable Delay,
determined pursuant to Articles 7 and 8 of the General Conditions, the Contract Sum will be increased by
the sum of {$AMOUNT IN FIGURES} per day for each day for which such compensation is payable.
ARTICLE 7 DUE AUTHORIZATION
The person or persons signing this Agreement on behalf of Contractor hereby represent and warrant to
University that this Agreement is duly authorized, signed, and delivered by Contractor.
June 6, 2011
Revision 4
LF:AGRMT
3
Agreement
Project No.: W4951/A4L-402/1000465759
THIS AGREEMENT is entered into by University and Contractor as of the date set forth above.
CONTRACTOR:
UNIVERSITY:
THE REGENTS OF THE UNIVERSITY OF
CALIFORNIA
(Name of Firm)
a
By:
(Type of Organization)
(Signature)
By:
Wm. Joel King, AIA
(Printed Name)
(Signature)
Assistant Vice Chancellor
and Campus Architect
(Title)
(Printed Name)
(Title)
California Contractor's License(s):
(Name of Licensee)
(Classification and License Number)
(Expiration Date)
_____________________________________
(Employer Identification Number)
Attach notary acknowledgement for all signatures of Contractor. If signed by other than the sole
proprietor, a general partner, or corporate officer, attach original notarized Power of Attorney or Corporate
Resolution.
June 6, 2011
Revision 4
LF:AGRMT
4
Agreement
UCSD FD&C – 12/20/2010 VERSION, REVISED 1/12/2012
SECTION 01240
UNIT PRICES
PART 1 - GENERAL
1.1
A.
SUMMARY
Section Includes:
1.
2.
3.
Unit price quotations are to be inserted in the appropriate spaces on the Bid
Form for each unit price item of Work described herein.
Unit prices stated in the Agreement shall be used to compute adjustments of the
Contract Sum for unit price items of Work. Unit price adjustments shall be made
by Change Order.
Unit prices shall include all labor, materials, tools and equipment; all other direct
and indirect costs necessary to complete the item of Work and to coordinate the
unit price Work with adjacent work; and shall include all overhead and profit.
Contractor shall accept compensation computed in accordance with the unit
prices as full compensation for completing such Work.
a.
1.2
A.
1.3
Compensation will be paid for those items of Work described herein under
“Unit Prices.”
DEFINITIONS
Unit price is an amount incorporated in the Agreement, applicable during the duration
of the Work as a price per unit of measurement for materials, equipment, or services,
or a portion of the Work, added to or deducted from the Contract Sum by appropriate
modification, if the scope of Work or estimated quantities of Work required by the
Contract Documents are increased or decreased.
PROCEDURES
A.
Unit prices include all necessary material, plus cost for delivery, installation, insurance,
applicable taxes, overhead, and profit.
B.
Measurement and Payment: Refer to individual Specification Sections for work that
requires establishment of unit prices. Methods of measurement and payment for unit
prices are specified in those Sections.
C.
University reserves the right to reject Contractor's measurement of work-in-place that
involves use of established unit prices and to have this work measured, at University's
expense, by an independent surveyor acceptable to Contractor.
D.
List of Unit Prices: Specification Sections referenced in the Schedule of Unit Prices, if
any, contain requirements for materials described under each unit price.
UNIT PRICES
01240-1
UCSD FD&C – 12/20/2010 VERSION, REVISED 1/12/2012
PART 2 - PRODUCTS (Not Used)
PART 3 - EXECUTION
3.1
ADVANCED COORDINATION
A.
The applicability of, measurement methods for, documentation of, and the final
adjustment of the Contract Sum for unit price items of Work shall be determined by
University’s Representative.
B.
After performing unit price item of Work #1as directed by University’s Representative,
Contractor shall take necessary measurements in the presence of University’s
Representative and shall submit calculations of quantities to University’s
Representative for approval. Contractor shall notify University’s Representative at
least one day in advance of taking measurements.
3.2
A.
SCHEDULE OF UNIT PRICES
Unit Price Item #1: Battery Cell. The plans call out for a 200kW/400kWh system with
(11) cells at 18kW each, based on information provided by STEM. The Contractor
shall provide unit price for each cell with associated kW rating, based on information
provided by the selected manufacture.
END OF SECTION 01240
UNIT PRICES
01240-2
PROJECT NO. 4951/A4L-402/1000465759
ADDENDUM NO. 1
QUESTIONS & ANSWERS
(As of December 17, 2015)
Q1:
A1:
Q2:
A2:
Q3:
A3:
Q4:
A4:
Q5:
A5:
Q6:
A6:
Please Confirm that no temporary facilities are to be included in our pricing for the university such
as rest rooms and office space for the university personnel
Confirmed.
Please confirm we have the area in front of the roll up door for our use during construction. Also the
restroom can be used by our personnel
Confirmed.
Is it possible to extend the construction schedule to 120 Days
No. The Contract Days are 90 days.
We are assuming that the SDG&E review will take no longer than 30 days for approval. Since we
have no control over this will the university look at this as a compensable delay?
This is not a new design to SDG&E. It is a modification to a previously approved system so no
SDG&E review and compensable delay should not be in consideration.
At the job walk it was discussed potential time lines for job award, NTP and completion. Please
reiterate those dates and or timelines
Notice of Selection (NOS) is issued three (3) days after bid protest period begins.
NTP issued after the NOS documents are returned (Awarded contractor will have ten (10) days to
return NOS documents).
The size of the battery system (>100 kW) and the pre-existing / operating PV system may trigger
SDGE to conduct both a circuit level review and then possibly a follow up distribution circuit review.
These reviews follow internal SDGE guidelines, policies and procedures that do not have identified
timelines before approval is given. These can cause indeterminate delays in the storage system
interconnection and final Permit to Operate. Do you expect the contractor to be responsible for these
delays or will UCSD be responsible for these delays
As stated above, SDG&E involvement is minimal and delay is not expected.
1 of 1
NO: 10987
L
A
R EG ISTE R
KUR E
T
O FE S S IO N
PR
A
R . KO
EER
NGI N
LE LER
H
D
NI
E
ST
L
AT E C T R I C A
E O
OR
F C A LI F
10/08/2015
RL #SD15120.00
CONSULTANTS
PROJECT: 4951
UCSD TRADE
STREET
INTEGRATED PV
STORAGE SYSTEM
FACILITY:
KEY PLAN
ADDENDUM #1
12/16/15
ISSUE FOR UCSD REVIEW
10/08/15
N0.
Description
REVISIONS:
DATE:
11/04/2015
SCALE:
AS NOTED
PROJECT NO:
SD15120.00
DRAWN BY:
RG
DESIGN BY:
RG
CHECKED BY:
RB
(E)
BATTERY ROOM
3744
9'-0"
File path: Z:\SD15120.00\CAD\Autocad\E\ T.1.dwg 12/17/15 08:47 RL tdiep
WAREHOUSE
3744
(E)
ELECT. ROOM
3744
(E)
(E)
(E)
SHEET TITLE:
TITLE SHEET
AREA OF WORK
SHEET NO.:
T.01
Date
DEMOLITION LEGEND
RANDALL
LAMB
Keclumicll,
LIPUnc Delicn
Bqlneen -
Electricll, Comm.UDicaUon,
SAN DIEGO-SAN FRANCISCO
EXISTING NON - RATED PARTITION TO REMAIN
4757 Pallll Avenue
La lleoa, California 91942-9252
EXISTING NON - RATED PARTITION TO BE DEMOLISHED
(819) 713-5700
Fax (819) 713-5701
,,..,
=:::J
I
I
t:=
o--Ir:::
:::JI-:
•
I
I
I
+--------<
I
2
2
2·~
DEMOLITION KEYNOTES
0
0
0
0
BATTERY ROOM
I
0
WAREHOUSE
I
I
3744
I
3744
ELECT. ROOM
I
L
3744
I
I
I
3744
REMOVE PORTION OF (E) 2X8 WOOD STUD PARTITION & PREP FOR NEW DOOR
OPENING
EXISTING FIRE RISER TO REMAIN
CONSULTANTS
ASCARI WARNE
hitects
REMOVE 3FT X 7FT (E) HOLLOW DOOR/ FRAME
ELECT. ROOM
WAREHOUSE
I
REMOVE (E) STEEL PIPE BOLLARD & GRIND SMOOT/ FLUSH WITH
FLOOR
1717 Kettner Blvd., Suite 100
San Diego, California 92101
619.814.0080 Fax619.814.0081
3744
I
PROPOSED PLAN LEGEND
7 ....
~
EXISTING WINDOW ASSEMBLY TO BE REMOVED
EXISTING TO REMAIN
(E)
10·-s·
EXISTING DOOR ASSEMBLY TO BE REMOVED
'~· 5~1!1
-
EXISTING NON-RATED PARTITION TO REMAIN
-
\
(E)~
~ 1
25 i_
-5
"-------
'
~\@ I
0
2
'\._
(E)
~~;;I ---j;::=:~:__-=-_____Jl~
I
-_ - - - - -
i
(E)
F
--'~----~
I
- - ==h--'--=:::;::;:-_:._-===---'---_,--ITil
~ -----
-~-+--+--
1
~
-- - -
~
-
ON.
Ill
Ill
Ill
II
~
~
•
I -
I •
NEW 1-HOUR FIRE BARRIER
•
I -
I •
EXISTING 1-HOUR FIRE BARRIER
-
EXISTING WINDOW ASSEMBLY TO REMAIN
~
(E)
EXISTING TO REMAIN
(E)
I
I
--
-~-+--+--
1
ON.
PROPOSED PLAN KEYNOTES
0
0
0
0
( 3: £.~~~LITION PLAN
PROPOSED PLAN
SCALE: 114"= 1'-0"
PROJECT: 4951
UCSD TRADE
STREET
INTEGRATED PV
STORAGE SYSTEM
INFILL DOOR OPENING PER 3/A-500
NEW DOOR/ FRAME PER SCHEDULE
FACILITY:
NEW CONCRETE PAD PER STRUCTURAL
PAINT ALL WALLS AND CEILING (PRIMER & 2 COATS PAINT). MATCH (E) COLOR
UCSD
(1
KEY PLAN
RCP PLAN LEGEND
.,
_ _ _ _ _ _ _. .I
_
lo
®
.
~N) 12X48 LED SURFACE MOUNTEDLENSED WRAPAROUND LIGHT
FIXTURE
CEILING MOUNTED FIRE ALARM PHOTOELECTRIC SMOKE
DETECTOR CONNECTED TO BUILDING FIRE ALARM SYSTEM
-------0
, " ~·
:
. ..
..
..
. ·.
.....
..
-
BATTERY ROOM
I
"
I
3744
9'-0"
I
I
•
WAREHOUSE
I
3744
I
NO.
Description
10/08/15
Date
REVISIONS:
(E)
0
DATE:
11/04/2015
SCALE:
AS NOTED
PROJECT NO:
SD15120.00
DRAWN BY:
RG
DESIGN BY:
RG
CHECKED BY:
RB
(E)
I
I
= - - --- - --- - - ==t-r-'---=::::;:::;:-_:_-===-----'--_r-11
(E)
~'-------0
I
ON.
SHEET TITLE:
DEMOLITION PLAN, PROPOSED PLAN,
RCPPLAN
SHEET NO.:
!
~
~~9~_9SED RCP PLAN
(4~ !!<?J..~SED
(2__,
L..._ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _..;:::;..:._ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _....;:::;.....:...._ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _---1
A-1 01
1-
DOOR SCHEDULE
FRAME
DOOR
DOOR
NUMBER TYPE
C)
W
H
MArL FINISH COLOR TYPE
T
MAT'L FINISH COLOR HEAD
JAMB
SILL
HRDWR.
REQ.
~
UJ
J:
LL
LAP 6"i
--;-+--~
#8 SMS. EA.
A
84
36
1-3/4
WD
P
ME
A
HM
P
ME
15/A-501 20/A-50
-
NO
1
60 MIN.
,-- ~--·VI
200
A
36
84
1-3/4
AL
F
TBD
A
AL
F
TBD
18/A-50 25/A-50
NO
2
NONE EXISTING ALUM. STOREFRON
1-...::..:_:_-f_:_:-f__:_:_f-_:_-f.:....::_:_1-c:::....f-_:_-f....:.::_:_+-:..:.._-f-...:..::'--1f-'-t-C::.::--fv::A:A,P~~f=_:_"-'f--'-''----j--=--f-'-'.:C..:::. .j:sySTEMTORECEWENEW
1------<--+----<---+----<---+----<---+--__,t----+-__,t----+---+----+----+-----+---+----i'DOOR&FIXEDTRANSOM
PANEL ABOVE
'·
- __ _,,
,
__ '" - -
I
I
:-;v
i
./1
J\
I
I
362T125-54-16 GA.-~'-.·.· .. ·
METAL TRACK
'
TO MATCH STUD WIDTH
.•••.
FRAME TYPES
r
PER
SCHEDULE
·r
r-----------i
1" SHAFT WALL
LINER
4757 Palm Avenue
La lle•a. California 111842-11252
(6111) 713-5700
Faz (6111) 713-5701
1~·,·_\·~··r\.\~···-'-'+--'--'-~"'"-'~~-'1--'~
~·4"-20GA.C-HSTUDS@
I
DOOR TYPES
llei:hanical, lledric«I, Communicatloll. J.qhtiq Deidp
STUD--'{:--'lf'=='7""=··=1:;;·_.=··:;;·;;l.;/~··.'::·.=:::'.:=:=:==:::·~
J==:=:::=J--'~
PER PLAN
100
RANDALL
LAMB
1:DPneen -
SAN DIEGO-SAN FRANCISCO
0::
0::
METAL J-RUNNEI
./
~
0::
PANIC
inches inches
inches
z
UJ
CJ)
DETAILS
~--4n-20GA.
(!)
'------ NEW 1-HOUR FIRE BARRIER
(U.L. #4415)
~.
I .........._........___
I~
518' TYPE 'X' GYP. BD.
TYP.
· .·. t - - - - @16"0.C.
362S125-54 MTL. STUDS
.
I
·.· I
'
•l
24" o.c.
#8SMS.
1 ···•·
·•·••· I
I
I
I
SHAFT WALL SYSTEM
CONSULTANTS
I
•
•l
U.L #4465
ASCARI WARNE
HEAD AT NON·RATED PARTITION
•
h 1
tects
1
1717 Kettner Blvd., Suite 1DD
San Diego, California 921 D1
619.814.DD8D Fax 619.814.DD81
-ft--(E} 1-HOUR 2X8 WOOD
STUD WALL
•
1~[1-,/--llfci==--- 515• TYPE 'X' GYP. BD
-
A
-
I
I
I
A
HARDWARE SET
ABBREVIATIONS
SEE SPECIFICATION SECTION 08 71 00
ME- MATCH EXISTING
AN -ANODIZED
HM- HOLLOW METAL
WD - WOOD(SOLID CORE)
MT - METAL DOOR
ALUM - ALUMINUM
K-KYNAR
P- PAINT
#8SMSEA.~
11----NEW 1-HOUR FIRE BARRIER
(U.L. # 4465)
STUD
\
\
-
PL - PLASTIC LAMINATE
·
E - EXISTING
T - TEMPERED GLASS
...
...
• <> J
H.0. - HOLD OPEN
SF - SATIN FINISH
/j
I
0 POWDER DRIVEN
PINS @ 24" O.C.
~-0.145
,;, V
,,--362T125-54-16GA. TRACK
TO MATCH STUD WIDTH
PROJECT: 4951
~
_ ___Jl..........~.IM...-~
STL.- GALVANIZED STEEL
K.S. - KICK STOP
TMLY - TIMELY
I
I
I1/
•
0
..• . :
.
Q .
-~ ~··
;
..o . .
0
PM- MATCH PAINT FINISH ADJACENT DOORS
F - FACTORY FINISH - TBD
TBD- TO BE DETERMINED
17
DOOR SCHEDULE
SCALE • NO 9CALE
-
- -
-
'
:>1
~
:;;!
'
..
•
NEW 1-HOUR RATED PARTITION
'
i" CONTINUOUS BLACK CELL
1 ·:.
~:_"1•. _.,L_._~._.~.-.~-.-~.-.~-.-.~;,;'>.µ:""'d1
~~~~~~~:SWITH FIRESTOP ON
.. :: ·:. ::::::::. :::::::...
BOARD WRAPPED AROUND (E)
CORNER MULLION. REFER TO
DETAIL 24 FOR REFERENCE
ONLY
- "
....
.<i<'
A
'
~
)
STOREFRONT MULLION
)
- -
-
_, .. -
::::=~::::".::'.___ SEALANT AND BACKER ROD
PARTITION TERMINATION AT EXISTING MULLION
SCALE1 3"=1'-0-
'
TYP. DR'iWALL WRAP.PED MULLION PTN.
.
)
18 '
/
z
:!!
1" MIN.
~
/
LINER
'
)
'
)
PLYWOOD
ROOF DECK
OSHPD Fl RE RESISTIVE ST.t.NDARD DETAILS
-
.,..
'I.
1--
NEW ALUMINUM DOOR SILL
\~--->-(E)
)
\
REMOVE (E) HORIZONTAL MULLION
NEW FLUSHLINE FRAME ADAPTERS, TYP. AT HEAD AND JAMBS
(KAWNEER FLUSHLINE ENTRANCES)
NOTE
1 JOINT TRANSi TONS FROM 'VERTICAL AND HORIZONTAL MULLIONS TO
RATED PARTITIOf~ ARE TO BE SEISMICALLY COMPA-IBLE WITH BUILCING
MOVEMENTS
\~----
PARTITION TERMINATION@ MULLIOl\J WRAPPED
10/1012014
1" SHAFT WALL\
BUILT UP ROOFING
SYSTEM
)
)
#8SMSTOP&---BOTIOM
ADHESIVE/SEALANT
I ·1
•
)
NEW 36" WIDE X 84" TALL ALUMINUM DOOR
(KAWNEER FLUSHLINE ENTRANCES, .062 THICK, PLAIN UNPATTERNED)
/
SET IN BED OF M-1
.'ir-
3
/
CHEM CURB 5" E-CURB
'
)
INFILL@ (E) DOOR
/
, - - - CHEM CURB M-1
ADHESIVE/SEALANT
~--CHEM CURB DURALINK
ADHESIVE/SEALANT
)
Sheet TiHe:
NEW 1-314" THICK ALUMINUM TRANSOM PANEL
(KAWNEER FLUSHLINE ENTRANCES, .062 THICK, PLAIN UNPATTERNED)
, , - - - METAL CONDUIT OR PIPE
'
MAX e· FROM ENDS
J'o,,• !•,•'
L
~::::::::;;::.;.::::::;;::.;.::::::;;::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::.::::::::;.:::::;;:::.;.:::;::::::;::-~-:;::;;:::::;:".:;:'.~'~
'
)
KB-TZWITH2" MIN.
EMB. (ESR-1917)@24• O.C. &
'1 .;-o ,. '~jll ,. 'D'° ,. 'D"
"·'·'·'·~J.,,•
.... '111· ,·'111· ,. ,,,. ,.
.
0
BOTH SIDES
)
11------3/8•0 HILTI
I~
UQ;.N
FIRESTOP ~
Section Ti~e
•
~
CON T Blfg:K
CLOSED-OE:LL
NEOPRENE· WI
)
16' o.c.
\
(E) S.O.G.--,
I'
EXTERIOR
- t i - - - - - NEW 2X8 WOOD STUDS@
NEW2XBWOOD--
SILLPLATE
I
~~~ION
,
)
2. REMOVE (E) INTERMEDIATE HORIZONTAL MULLION
I<
3. REMOVE (E) SILL MULLION
\(Y'
)
KEY PLAN
1. REMOVE EXISTING GLAZING
~--t,Hi· .;\ )\ i\,.ce~1 PTN
)
STUDS W/ 16d NAILS
- - - - NEW ALUMNINUM STOREFRONT
DOOR&FRAME
MULLION BELOW,
TYP.
UCSD
A35 FRAMING CLIP TOP &
BOTTOM & BOTH SIDES OF
DEMO NOTES
....
11..l-..+--- (E) CORNER ALUMINUM
CONT BLACK
CLOSED-CELL
NEOPRENE WI
FIRESTOP ON BOTH
SIDES@HORIZ.
- -
fl'----
v~-.-~--
1f2" TYP
--mnr,/'
v
(E) GYP. BOARD
~v
A
'
NEOPRENE__;
GASKET @ GLASS
L'I----
I"J''-<_+---- (E) WOOD HEADER
IA
~-- NEW 519· TYPE ·x· GYP. BOARD
~=fllll!lilllll!r::"::!==-;/--(2) LAYERSt' TYPE "X'' GYP
'
2
FACILITY:
..
~-.. I
BASE AT NON·RATED PARTITION
9CALI!: 3-.1·-0-
-
-
•
(7
INTERIOR SECTION
SCALE11-.........
UCSD TRADE
STREET
INTEGRATED PV
STORAGE SYSTEM
(2) #12 X 2 WOOD SCREWS
@EA. STUD 16" O.C.
. ·:--,.·•..
. '/ . ·..
····~•~&~--/
REMOVE (E) SILL MULLION
(E) 1-HOUR 2X8 WOOD
·
STUD WALL
OPD-0091 -13: Re"1ewetJ fcr C:>:le Compliance by Gary Dunger
Page28of51
)
NOTE: FLASHING AT VERTICAL UNISTRUT SUPPORT SIMILAR
(24, )~; 3~~0?F PENETRATION
)
A
A
-
19
EXTERIOR ELEVATION
JOIST CONNECTION TO EXISTING WALL
SCALE:112"=1'-0'
9CALI!: 3-.1·-0-
.
~------DOUBLE STUDS PER
®
CONDENSER UNIT.
v-DOUBLE 2x8 HEADER
STUDS, OR 4x8
WALLBOARD.
~-----
v
•
INTERIOR
EXTERIOR
_
ALUMINUM DOOR
BOTTOM RAIL
ALUMINUM THRESHOLD SET
IN SEALANT & ANCHORED
PER MANUF. SPECS.
\ I\.
I \
518" TYP 'X' GYPSUM WALLBOARD.
-
...J--f-- 'T TYPE JAMB ANCHOR TO MATCH STUD WIDTH
..
. '!.
.•.•
.
• •••
.
°I
~"=.....---~~
•
•
• •
[
INTERIOR DOOR SHOWN DOTIED PER PLAN.
REFER TO DOOR SCHEDULE FOR
INFORMATION.
(iO\
;I
...
I
II
..
•
GU_o
----+o----1
HOLLOW METAL DOOR FRAME PER
0
I~
ilt---SIMPSON "HH4"
HEADER HANGER, TYF.
TYPE JAMB ANCHOR TO MATCH
METAL STUD WIDTH
~~~LOW
METAL DOOR FRAME
ffi
INTERIOR DOOR SHOWN DOTTED
FOR CLARITY. REFER TO DOOR
SCHEDULE FOR INFORMATION.
COUNTERSINK-----.
BOLT
\
~(E)
NON-BEARING
2x8 WOOD STUDS
@ 16" O.C. (VERIFY)
~DOUBLE
2x8
STUDS, EA. SIDE
(E) 5" CONCRETE~~
SLAB ON-GRADE,
F'c ~ 3,000 PSI
I
V
ALUMINUM DOOR SILL
~~ ~~:=~-O"OORJAMB
2~ rc!~ 3~?.~RHEAD
15132' PLYWOOD
PERSTRUCT.
PROJECT NO:
5015120.00
DRAWN BY:
RG
24 GA. GALV. SHEET METAL CAP.
DESIGN BY:
RG
CASE STRIP.
CHECKED BY:
RB
BASE FLASHING
CAP PER SPEC.
SHEET TITLE:
~
v\
CLASS-"A"BUILT
UP ROOFING
SYSTEM PER
SPEC.
DETAILS & DOOR SCHEDULE
WOOD SLEEPER _ _ _ __ , , /
SIZE & ANCHOR
OF DOOR
PERSTRUCT.
./""""SIMPSON "A24" w/i[
DIA. A307 BOLT TO
4"MIN.
===It ,STUDS
AND r
f"-==m.A
~
:ll,L------...lllii1
3" SIMPSON
.1----------------1.
~
BUILDING PAPER
1~ ~M~~f:1~1 .~lDOOROPENING
11/04/2015
AS NOTED
/~//~
\V,
30#REDROS1N-~
DATE:
SCALE:
TYP.
-NOTE:
CUT (2)
STUDS MAXIMUM
Description
ANCHOR PER STRUCTURAL. SET
IN MASTIC WITH NEOPRENE
WASHERS, TYP.
SIMPSON "A35",--11
--!HH--- "Z"
STRUCTURAL.
SLOPE
><
~-:-><-.-~
JioE::::::__:~;JHt---STUD HEADER PER
- CONCRETE SLAB
ON GRADE.
~ CONCRETE PAVING PERIC===11
""'
'"'"'
NO.
REVISIONS:
,r--(4) Bd TOENAILS, TYP .
1 1 - - - - 5/8" TYPE 'X' GYPSUM
-
4
DIA.
TITEN
HD SCREW ANCHOR
TO SLAB, TYP.
0~ ~~~~:FLASHING
SHEET NO.:
5,,
DETAIL
.__ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _....._
_ _3"_
SCALE:
=_
1•-0•_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _.;:::.::;;..L.._ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _....;;:;;:;:;..L._ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _;::;;;:::;..i..__ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _..;::=::;...__ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _....;:.=:;..i
A-500
10/08115
Date
7
(E)
NO: 10987
TRANSFORMER "TP1"
15kVA, 480V-120/208V, 3PH, 4W
10/08/2015
RL #SD015120.00
G
WAREHOUSE
3744
(E)
BATTERY ROOM
3744
CONSULTANTS
9750 Miramar Road, Suite 310
San Diego, CA 92126
www.Orie2.com
ELECT. ROOM
3744
(E)
PROJECT:
(E)
H
UCSD TRADE
STREET BATTERY
STORAGE
FACILITY:
File path: Z:\CADD\450 - Randall Lamb\220-15 - UCSD Trade Street Battery Storage System\ S101.dwg 10/27/15 17:41 O2 James
KEY PLAN
N0.
Description
10/08/16
Date
REVISIONS:
DATE:
10/08/2015
SCALE:
AS NOTED
PROJECT NO:
SD15120.00
DRAWN BY:
JLO
DESIGN BY:
KCL
CHECKED BY:
DRO
SHEET TITLE:
STRUCTURAL PAD &
DETAILS
SHEET NO.:
S-101
NO: 10987
10/08/2015
RL #SD015120.00
CONSULTANTS
9750 Miramar Road, Suite 310
San Diego, CA 92126
www.Orie2.com
PROJECT:
UCSD TRADE
STREET BATTERY
STORAGE
FACILITY:
File path: Z:\CADD\450 - Randall Lamb\220-15 - UCSD Trade Street Battery Storage System\ S102.dwg 10/27/15 17:41 O2 James
KEY PLAN
N0.
Description
10/08/16
Date
REVISIONS:
DATE:
10/08/2015
SCALE:
AS NOTED
PROJECT NO:
SD15120.00
DRAWN BY:
JLO
DESIGN BY:
KCL
CHECKED BY:
DRO
SHEET TITLE:
STRUCTURAL DETAILS
SHEET NO.:
S-102
MECHANICAL LEGEND
N EER
R EG ISTE R
E
RY
O FE S S IO N
PR
B RA A
AN
NGI
LE N
U
D
NO: 31988
NI
L
M
ST
E
AT CH A N I C A
E O
OR
F C A LI F
A
MECHANICAL GENERAL CONSTRUCTION NOTES
10/18/15
RL #SD015120.00
CONSULTANTS
MECHANICAL BASIS OF DESIGN
PROJECT: 4951
UCSD TRADE
STREET
INTEGRATED PV
STORAGE SYSTEM
MECHANICAL SHEET INDEX
FACILITY:
KEY PLAN
File path: Z:\SD15120.00\CAD\Autocad\M\ M1-0.dwg 12/17/15 08:48 MECHANICAL LEGEND NOTES SHEET INDEX AND SCHEDULES tdiep
GENERAL DATA
FAN
COOLING
ELECTRICAL DATA
AREA SERVED
CFM
OSA
MATCHING
COND. UNIT
MAKE/MODEL
TOTAL
CAPACITY
(MBH)
SENSIBLE
CAPACITY
(MBH)
V./PH./Hz.
MCA
MOCP
ON EMERGENCY
POWER (YES/NO)
SEER
MAKE/MODEL
WEIGHT
LBS
REFRIGERANT
TAG
WEIGHT
LBS
FC
1
MITSUBISHI
PKA-A36KA4
BATTERY ROOM
920
0
46
CU
1
MITSUBISHI
PUY-A36NHA4
34.3
24.3
208/1/60
25
40
NO
R410A
14.0
163
REMARKS
PROVIDE OPTIONAL REMOTE TEMPERATURE SENSOR. INDOOR UNIT SHALL BE POWERED FROM OUTDOOR UNIT. PROVIDE
NEOPRENE PADS FOR OUTDOOR CONDENSING UNITS. DISCONNECT BY ELECTRICAL. NOMINAL COOLING CAPACITIES ARE
BASED ON INDOOR COIL EAT OF 80 DEG F, OUTDOOR OF 95 DEG F.
ADDENDUM #1
12/16/15
10/08/15
N0.
Description
REVISIONS:
DATE:
11/04/2015
SCALE:
AS NOTED
PROJECT NO:
SD15120.00
DRAWN BY:
RG
DESIGN BY:
RG
CHECKED BY:
RB
SHEET TITLE:
MECHANICAL LEGEND
NOTES SHEET INDEX
AND SCHEDULES
SHEET NO.:
M-001
Date
NOTES
1
8
N EER
R EG ISTE R
E
RY
O FE S S IO N
PR
B RA A
AN
NGI
LE N
U
D
NO: 31988
NI
L
M
ST
E
AT CH A N I C A
E O
OR
F C A LI F
A
7
REFRIGERANT PIPING SHALL BE SIZED AND INSTALLED PER MANUFACTURER
RECOMMENDATIONS. REFRIGERANT PIPING AND CONDUIT TO POWER INDOOR
UNIT TO RUN FROM FAN COIL UNIT IN BATTERY ROOM, SUPPORTED ALONG
WALL UP TO CONDENSING UNIT ON ROOF. CONDENSATE TO BE ROUTED
THROUGH EXTERIOR WALL TO DISCHARGE 12" ABOVE GRADE. REFER TO
3/M-101 FOR SPLIT SYSTEM DETAIL.
10/18/15
RL #SD015120.00
G
SEQUENCE OF OPERATION
CONSULTANTS
OCCUPIED MODE: THE OCCUPIED MODE OF OPERATION WILL BE SCHEDULED TO RUN 24/7/365 TO MAINTAIN A
SPACE TEMPERATURE SETPOINT OF 76 DEG F IN THE BATTERY ROOM. THE SPLIT SYSTEM SHALL HAVE LOCAL
CONTROLS ONLY AND NOT BE TIED INTO ANY BMS SYSTEM.
SUPPLY FAN CONTROL: THE CONSTANT SPEED SUPPLY FAN WILL BE INTERNALLY CONTROLLED BY THE
PACKAGED UNIT CONTROLLER AND CONFIGURED TO RUN CONTINUOUSLY.
BATTERY ROOM
3744
TEMPERATURE CONTROL: THE PACKAGED UNIT CONTROLLER SHALL MONITOR THE SPACE TEMPERATURE
AND CYCLE THE CONDENSING UNIT TO MAINTAIN THE ROOM TEMPERATURE SETPOINT.
9'-0"
ELECT. ROOM
3744
WAREHOUSE
3744
SUCTION & LIQUID
REFRIGERANT LINES
TO INDOOR UNIT IN BATTERY ROOM
NEOPRENE PAD
"VIBREX" RC OR
EQUAL, BOLT THRU
LEVEL PAD
1
PROJECT: 4951
FLASHING PER ARCHITECURAL (SEE 19/A-500)
LEVEL PLATFORM
(SEE 6/S-102)
UCSD TRADE
STREET
INTEGRATED PV
STORAGE SYSTEM
H
OUTDOOR UNIT
MOUNT TO WALL AT 7'-6"
AFF PER MANUFACTURER'S
INSTALLATION
INSTRUCTIONS. SEE 5/S102
FOR ANCHORAGE.
ROUTE CONDENSATE
THROUGH EXTERIOR
WALL AND DISCHARGE
12" ABOVE GRADE (SEE
4/M101).
LIQUID & SUCTION
REFRIGERANT LINES TO
CONDENSING UNIT ON ROOF
FACILITY:
INDOOR UNIT
*PIPE SIZING AND INSTALLATION SHALL BE PER MANUFACTURER'S INSTRUCTIONS
SPLIT SYSTEM DETAIL
NOT TO SCALE
3
ENLARGED BATTERY ROOM PLAN
SCALE: 1/4" = 1'-0"
1
KEY PLAN
NOTES
1
7
8
REFRIGERANT PIPING SHALL BE SIZED AND INSTALLED PER MANUFACTURER
RECOMMENDATIONS. SUPPORT SPLIT SYSTEM PIPING AND CONDUIT ON ROOF
WITH NEOPRENE ROOFTOP PIPE SUPPORTS. REFER TO 3/M-101 FOR SPLIT
SYSTEM DETAIL.
G
1
File path: Z:\SD15120.00\CAD\Autocad\M\ M1-1.dwg 12/17/15 08:50 MECHANICAL PLANS AND DETAILS tdiep
EXTERIOR
BUILDING
WALL
ADDENDUM #1
12/16/15
10/08/15
ESCUTCHEON
1-1/2" AIRGAP
N0.
GRADE
H
3'-0" DEEP
STAINLESS STEEL
MESH
DATE:
11/04/2015
SCALE:
AS NOTED
PROJECT NO:
SD15120.00
DRAWN BY:
RG
DESIGN BY:
RG
CHECKED BY:
RB
SHEET TITLE:
UNDISTURBED EARTH
OR COMPACTED FILL
MECHANICAL PLANS AND
DETAILS
18"
DIAMETER
SHEET NO.:
DRYWELL DETAIL
Date
REVISIONS:
CONDENSATE DRAIN LINE
FROM FC-1 INSIDE
3/4" DIA MINIMUM
WASHED GRAVEL
Description
NOT TO SCALE
4
ENLARGED ROOF PLAN
SCALE: 1/4" = 1'-0"
2
M-101
POWER SYMBOL LIST
LIGHTING FIXTURE SCHEDULE
SYMBOL
LED SURFACE MOUNTED
LENSED WRAPAROUND
METALUX:
4WNLED-LD1-41-F-UNVL835-SD-1
DESCRIPTION
DUPLEX CONVENIENCE OUTLET MOUNTED IN FLUSH BOX AT
+18" AFF UNLESS NOTED OTHERWISE.
1'X4"
WHITE W/ FROST
PRISMATIC LENS
4100 LUMENS
3500K, LED
120V (UNIVERSAL)
DUPLEX CONVENIENCE OUTLET MOUNTED IN SURFACE BOX AT
+18" AFF UNLESS NOTED OTHERWISE.
41
BATTERY CABINET
(TYPICAL)
G
PANEL "BATT"
DUPLEX CONVENIENCE OUTLET MOUNTED W/INTEGRAL GROUND FAULT
INTERRUPTER, +18" AFF UNLESS NOTED OTHERWISE.
DOUBLE DUPLEX CONVENIENCE OUTLET, +18" AFF UNLESS NOTED OTHERWISE.
SPST WALL SWITCH. LETTERS INDICATE THE NUMBER OF SWITCHES AND
OUTLETS THEY CONTROL. MOUNTED FLUSH IN BOX AT +42" AFF U.O.N.
DISCONNECT SWITCH, MOUNTED AT +54" AFF UNLESS NOTED OTHERWISE.
BC-2
BC-3
BC-4
BC-5
BC-6
TRANSFORMER
"TP1"
2# 12, 3/4"C.
5# 12, 3/4"C.
3# 12, 3/4"C.
6# 12, 3/4"C.
4# 12, 3/4"C.
7# 10, 3/4"C.
E
ST
L
AT E C T R I C A
E O
OR
F C A LI F
SURFACE MOUNTED FLUORESCENT LIGHTING FIXTURE.
BC-1
NO: 10987
L
A
a,b,c
S
R EG ISTE R
KUR E
T
SWITCH MOUNTED IN SURFACE BOX, +42" AFF UNLESS NOTED OTHERWISE.
O FE S S IO N
PR
A
R . KO
NI
S
NEW PANEL "HP-2"
D
EER
NGI N
LE LER
H
NEW PANEL "HL-2"
10/08/2015
RL #SD15120.00
CONSULTANTS
BRANCH CIRCUIT CONDUIT, RUN EXPOSED.
SURFACE MOUNTED BRANCH CIRCUIT PANELBOARD.
NORTH ELEVATION - A
DISTRIBUTION BOARD.
EAST ELEVATION - C
ENCLOSED CIRCUIT BREAKER
TERMINAL CABINET.
P
BATTERY CABINET
(TYPICAL)
CEILING MOUNTED FIRE ALARM PHOTOELECTRIC SMOKE DETECTOR.
A-1
BRANCH CIRCUIT HOMERUN WITH PANEL AND CIRCUIT DESIGNATED.
EXISTING TEL/DATA
BACKBOARD
BC-7
BC-8
BC-9
BC-10
DUAL TECHNOLOGY OCCUPANCY SENSOR.
BC-11
SURFACE WALL SWITCH OCCUPANCY SENSOR.
EXISTING SPRINKLER
SYSTEM RISER
XFMR
SOUTH ELEVATION - B
X
INDICATES EXISTING TO REMAIN.
XR
INDICATES EXISTING TO BE REMOVED.
XL
INDICATES EXISTING TO BE RELOCATED.
XN
INDICATES NEW LOCATION OF RELOCATED EQUIPMENT.
WP
WEATHERPROOF.
PROJECT: 4951
UCSD TRADE
STREET
INTEGRATED PV
STORAGE SYSTEM
GENERAL NOTES
WEST ELEVATION - D
ENLARGED ELECTRICAL AND BATTERY ROOM PLAN
TRANSFORMER.
SCALE: 1/4" = 1'-0"
2
1.
ALL WORK SHOWN IS NEW UNLESS NOTED EXISTING.
2.
SEAL ALL CONDUIT PENETRATIONS OF FLOORS AND FIRE RATED ASSEMBLIES
WITH U.L. APPROVED MATERIALS AND METHODS TO MAINTAIN FIRE RATING.
3.
PROVIDE NEW TYPEWRITTEN DIRECTORIES REFLECTING WORK PERFORMED
FOR ALL EXISTING PANELBOARDS MODIFIED BY THIS PROJECT.
4.
PROTECT ALL OPENINGS FOR STEEL ELECTRICAL BOXES IN FIRE RATED WALLS
WITH U.L. APPROVED MATERIALS AND METHODS TO MAINTAIN THE FIRE
INTEGRITY. (CBC 712.4.1.2).
1
FIRE RATED ALL PENETRATION DETAIL
FACILITY:
1
GENERAL NOTES
1.
8
KEY PLAN
ALL PANEL "BATT" BRANCH CIRCUIT RACEWAYS INCLUDING CONDUIT AND
BOXES SHALL BE LABELED "BATTERY STORAGE SYSTEM" AT 10'-0" INTERVALS.
WP
16,18
WP
G 20
1
2. ALL WARNING SIGNS/LABELS SHALL BE WHITE LETTERS ON RED BACKGROUND.
XR
3
XR
2
1
11
BATTERY SYSTEM
GUTTER (BSGS)
GHL2
+9'-0"
9
NEW PANEL "HP2"
NOTES
GHP2
+9'-0"
PANEL
BATTERY
"BATT" 10
NEW PANEL "HP-2".
2
NEW PANEL "HL-2".
3
REMOVE/ADD/MODIFY EXISTING WARNING NAMEPLATE LABEL TO READ AS
FOLLOWS:
"SERVICE DISCONNECT 1 OF 3"
UTILITY DISCONNECT - LOCATED IN PV SYSTEM ENCLOSURE
BATTERY STORAGE DISCONNECT - LOCATED IN MAIN
ELECTRICAL ROOM.
"WARNING ELECTRIC SHOCK HAZARD"
LINE AND LOAD TERMINALS MAYBE ENERGIZED IN THE OPEN POSITION.
IF GROUND FAULT IS INDICATED, NORMALLY GROUNDED CONDUCTORS
MAYBE UNGROUNDED AND ENERGIZED.
ROOM
3744
BATTERY SYSTEM
GUTTER (BSGN)
9'-0"
P
WAREHOUSE
3744
ELECT. ROOM
3744
7
MAIN BATTERY SYSTEM STORAGE 5
DISCONNECT "EC-BATT"
4
BATTERY SYSTEM POWER MONITOR
EXISTING METER SECTION
X
EXISTING MAIN CIRCUIT BREAKER SECTION 3
EXISTING PULL SECTION
11
(E)
6
(E)
6
7
File path: Z:\SD15120.00\CAD\Autocad\E\ E100.dwg 12/16/15 16:55 RL tdiep
8
9
10
11
ENLARGED ELECTRICAL AND BATTERY ROOM PLAN
2
XR
WAREHOUSE
3744
XR
c
a,b,c
XR
ELECT. ROOM
3744
(1) CAT 5E TELECOMMUNICATIONS NETWORK CONNECTION CABLE IN 3/4" C.
COORDINATE CONNECTION REQUIREMENTS WITH UCSD IT AND BATTERY
SYSTEM MANUFACTURER.
ab
XR
XR
4
XR
ELECT. ROOM
3744
XR
BATTERY ROOM
3744
PROVIDE WARNING NAMEPLATE LABEL TO READ AS FOLLOWS:
"SERVICE DISCONNECT 3 OF 3"
UTILITY DISCONNECT - LOCATED AT MAIN ELECTRICAL ROOM
PV DISCONNECT - LOCATED WITHIN PV SYSTEM INVERTER
ENCLOSURE.
LINE AND LOAD TERMINALS MAYBE ENERGIZED IN THE OPEN POSITION.
IF GROUND FAULT IS INDICATED, NORMALLY GROUNDED CONDUCTORS
XR
XR
X
5
4
4
X
EXISTING PULL SECTION/SPLICE BOX
XR
XR
1
X
BATTERY SYSTEM
COMMUNICATIONS
PULLBOX
4
XR
TRANSFORMER "T-HP2"
15kVA, 480V-120/208V, 3PH, 4W
5
4
REMOVE/ADD /MODIFY EXISTING WARNING NAMEPLATE LABEL TO READ AS
FOLLOWS:
"SERVICE DISCONNECTS 2 OF 3"
UTILITY DISCONNECT LOCATED AT MAIN ELECTRICAL ROOM
BATTERY STORAGE SYSTEM DISCONNECT - LOCATED AT MAIN
ELECTRICAL ROOM.
LINE SIDE TERMINALS MAYBE ENERGIZED IN THE OPEN POSITION. IF
GROUND FAULT IS INDICATED, NORMALLY GROUNDED CONDUCTORS
(E)
CONNECT TO EXISTING FIRE ALARM SYSTEM TERMINAL CABINET LOCATED IN
ELECTRICAL ROOM 3744, COORDINATE CABLING CONDUIT REQUIREMENTS
WITH FIRE ALARM VENDOR.
EXTEND EXISTING CONDUCTORS SAFED OFF DURING DEMOLITION IN NEW 20"
X 6" X 6" GUTTER "GHL2" AND EXTEND TO NEW PANELBOARD "HL-2", BRANCH
CIRCUIT NUMBERING TO REMAIN THE SAME FOR EXISTING BRANCH CIRCUITS
RECONNECTED TO NEW PANEL "HL-2".
EXTEND EXISTING CONDUCTORS SAFED OFF DURING DEMOLITION IN NEW 20"
X 6" X 6" GUTTER "GHP2" AND EXTEND TO NEW PANELBOARD "HP-2". BRANCH
CIRCUIT NUMBERING TO REMAIN THE SAME FOR EXISTING BRANCH CIRCUITS
RECONNECTED TO NEW PANEL "HP-2".
PROVIDE WARNING NAMEPLATE LABEL TO READ AS FOLLOWS:
PANELBOARD IS ENERGIZED FROM TWO SOURCES OF POWER.
BATTERY STORAGE SYSTEM INVERTER
UTILITY GRID
LINE AND LOAD TERMINALS MAY BE ENERGIZED IN THE OPEN POSITION. IF
GROUND FAULT IS INDICATED GROUNDED CONDUCTORS MAY BE
UNGROUNDED AND ENERGIZED. PANELBOARD CONTAINS INVERTER OUTPUT
DEVICES AND SHALL NOT BE USED FOR OTHER THAN INVERTER OUTPUT
DEVICES.
5
12/16/15
10/08/15
N0.
Description
Date
REVISIONS:
NOTES
NOTES
1
2
3
4
1
CU-1 UNIT LOCATED ON ROOF, SEE MECHANICAL DRAWING M1-1 FOR EXACT
LOCATION.
EXTEND EXISTING CONDUCTORS SAFED OFF DURING DEMOLITION AND
EXTEND TO NEW RECEPTACLE AND LIGHTING CONTROL SWITCHES AS
INDICATED. MAINTAIN EXISTING LIGHTING CONTROLS SWITCHING SCHEME.
EXTEND EXISTING CONDUCTORS SAFED OFF DURING DEMOLITION AND
EXTEND TO NEW RECEPTACLE AS INDICATED. CIRCUIT TRACE EXISTING
BRANCH CIRCUIT SERVING NEW RECEPTACLE AND LABEL NEW RECEPTACLE
WITH BRANCH CIRCUIT DESIGNATION.
2
NEW SPRINKLER HEAD. CONTRACTOR SHALL PROVIDE CODE COMPLIANCE
FIRE PROTECTION DESIGN FOR DEFERRED SUBMITTAL.
PROVIDE NEW SIGN IN DOOR TO READ "BATTERY STORAGE SYSTEM".
SCALE: 1/4" = 1'-0"
ADDENDUM #1
POWER AND LIGHTING PLAN - RENOVATION
SCALE: 1/4" = 1'-0"
4
REMOVE EXISTING PANELBOARD "HP-2", INTERCEPT AND SAFE OFF ALL
BRANCH CIRCUIT CONDUCTORS AND FEEDER CONNECTED TO PANELBOARD
"HP-2" IN NEW 20" X 6" X 6" SURFACE MOUNTED GUTTER LOCATED AT +9'-0"
A.F.F. DIRECTLY ABOVE PANELBOARD "HP-2" FOR RECONNECTION TO
PANELBOARD "HP-2" IN NEW LOCATION. LABEL ALL BRANCH CIRCUIT
CONDUCTORS WITH EXISTING DESIGNATED BRANCH CIRCUIT NUMBERS.
COORDINATE EXACT LOCATION OF NEW GUTTER WITH INSTALLATION OF NEW
DOOR, SEE ARCHITECTURAL PLANS.
REMOVE EXISTING PANELBOARD "HL-2", INTERCEPT AND SAFE OFF ALL
BRANCH CIRCUITS AND FEEDER CONNECTED TO PANELBOARD "HL-2" IN NEW
20" X 6" X 6" SURFACE MOUNTED GUTTER LOCATED AT +9'-0" A.F.F. DIRECTLY
ABOVE PANELBOARD "HL-2" FOR RECONNECTION TO PANELBOARD "HL-2" IN
NEW LOCATION. LABEL ALL BRANCH CIRCUIT CONDUCTORS WITH EXISTING
DESIGNATED BRANCH CIRCUIT NUMBERS. COORDINATE EXACT LOCATION OF
NEW GUTTER WITH INSTALLATION OF NEW DOOR, SEE ARCHITECTURAL PLANS.
3
REMOVE EXISTING 9kVA WALL MOUNTED TRANSFORMER.
4
INTERCEPT EXISTING CONDUIT, DISCONNECT EXISTING BRANCH CIRCUIT(S)
AND SWITCHING CONDUCTORS, SAFE OFF CONDUCTORS IN NEW SURFACE
MOUNTED JUNCTION BOX AT 12'-0" FOR EXTENSION TO NEW LIGHTING
CONTROL SWITCH AND RECEPTACLES.
5
INTERCEPT EXISTING CONDUIT, DISCONNECT EXISTING BRANCH CIRCUIT
SERVING EXISTING RECEPTACLE AND SAFE OFF CONDUCTORS IN NEW
SURFACE MOUNTED JUNCTION BOX AT 12'-0" FOR EXTENSION TO NEW
RECEPTACLE.
POWER AND LIGHTING PLAN - DEMOLITION
DATE:
11/04/2015
SCALE:
AS NOTED
PROJECT NO:
SD15120.00
DRAWN BY:
RG
DESIGN BY:
RG
CHECKED BY:
RB
SHEET TITLE:
SYMBOL LIST, LIGHTING
FIXTURE SCHEDULE,
ELECTRICAL PLANS,
ELEVATIONS AND NOTES
SHEET NO.:
SCALE: 1/4" = 1'-0"
3
E-100
6 SETS (4#10, 1#12 GND., 3/4" C)
2 (4#4/0, 1#2 GND., 2-1/2" C)
6"x6" WIRE WAY - NEMA 1
(1) CAT 5E TELECOMMUNICATIONS
CABLE TO TELECOM BACK BONE
4#10, 1#12 GND., 3/4" C
7
1600A
KWH
EXISTING 8#4/0, 6#3/0,
1#2 G., 4" C.
2
R EG ISTE R
KUR E
T
BC6
BATTERY
RACK
18KW
36KWh
2
BC5
BATTERY
RACK
18KW
36KWh
2
BC4
BATTERY
RACK
18KW
36KWh
2
BC3
BATTERY
RACK
18KW
36KWh
2
BC2
6
GFI
10A
TRANSFORMER "T-HP2"
480-208/120V 3 PH 4W
15 kVA
3P
EXISTING 3#600kCMIL,
1#1/0 G., 3 1/2" C.
N
G
3
3#12, 1#12G. 1/2"C
BATTERY SYSTEM
COMMUNICATION CABLING
PHOTOVOLTAIC PHOTOARRAY "3"
11 STRINGS OF 14 MODULES
COMBINER BOX 3
COMBINER BOX 7
2
BATTERY
2
BC10
RACK
BATTERY
2
BC11
RACK
18KW
36KWh
18KW
36KWh
5 SETS (4#10, 1#12 GND., 3/4" C)
BATTERY
BC9
RACK
18KW
36KWh
COMBINER BOX 6
2
COMBINER BOX 2
BATTERY
BC8
RACK
8
18KW
36KWh
COMBINER BOX 5
2(4#4/0, 1#2 G., 2-1/2" C.)
2
COMBINER BOX 1
BATTERY
BC7
RACK
4
18KW
36KWh
EXISTING BUILDING
SERVICE
10/08/2015
RL #SD15120.00
4#6, 1#8, 1 1/2" C.
5
NO: 10987
L
AT E C T R I C A
E O
OR
F C A LI F
PANEL
"HP2"
400AF
9
ROOF
MOUNTED
JUNCTION
BOX
5
BATTERY
RACK
400AS
SATELITE
POWER
MONITOR
18KW
36KWh
POWER
MONITOR
BC1
480/277V, 3PH,
4W, 1600A BUS
BATTERY
RACK
10
O FE S S IO N
PR
A
R . KO
E
KWH
ST
KWH
INVERTER
D
EER
NGI N
LE LER
H
PANEL
BATT
18KW
36KWh
2
2(4#4/0, 1#2 G., 2-1/2" C.)
L
A
EXISTING 4#600kCMIL,
1#1/0 G., 3 1/2" C.
NI
EXISTING SDG&E PAD
MOUNT TRANSFORMER
CONSULTANTS
3#8, 1#10 GND., 1" C
PANEL
"HL2"
4#1, 1#8 GND., 1 1/2" C
4#10, 1#12 GND., 3/4" C
6"'x6" WIRE WAY - NEMA 1
COMBINER BOX 4
2#4/0, 1#4 G. 2" C.
2#4/0, 1#2 G. 2" C.
2#4/0, 1#2 G. 2" C.
2#4/0, 1#4 G. 2" C.
PROJECT: 4951
EXISTING TENANT SECTION
EXISTING TENANT METER SECTION
480/277V, 3PH,
4W, 2000A BUS
480/277V, 3PH, 4W, 2000A BUS
UCSD TRADE
STREET
INTEGRATED PV
STORAGE SYSTEM
EXISTING PV SYSTEM
NOTES:
1
INTERCEPT EXISTING 4#1,1#8GND., 1 1/2"C. AND EXTEND TO NEW PANEL "HL2".
2
18 KW/36 KWh BATTERY ENCLOSURE
277/480 VOLT INPUT/OUTPUT
90% MINIMUM CHARGE AND DISCHARGE EFFICIENCY
POWDER COATED ALUMINUM ENCLOSURE
FIELD REPLACEABLE LITHIUM ION BATTERIES
CAPACITY
57.9
VOLTAGE
54.0 VDC
WATT-HOUR 2000WH
MAX CHARGE/DISCHARGE 25A
CERTIFICATIONS UL1973, UL 1642 (CELLS), UN 38.3
100A
100A
3P
100A
3P
100A
3P
100A
3P
100A
3P
100A
3P
100A
3P
100A
3P
3P
GENERAL NOTES:
400A
1. BATTERY STORAGE SYSTEM IS BASED ON STEM . ANY PROPOSED EQUIPMENT WILL MEET THE
PHYSICAL DIMENSIONS AND OPERATIONAL CHARACTERISTICS INDICATED ON THE PLANS.
1
2. BATTERY SYSTEM VENDOR TO FURNISH AND INSTALL ALL BATTERY AND BATTERY MONITORING
SYSTEM DEVICES, ACCESSORIES, CONDUCTORS, CONNECTIONS AND APPURTENANCES REQUIRED
FOR A COMPLETELY FUNCTIONAL BATTERY AND BATTERY MONITORING SYSTEM.
3
MAIN BATTERY STORAGE SYSTEM DISCONNECT (ENCLOSED FUSED DISCONNECT "EC-BATT") FOR
UTILITY OPERATION, NEMA 1 ENCLOSURE, SERVICE RATED, CAPABLE OF REVERSE FEED OPERATION
AND PAD LOCKABLE IN THE OFF POSITION.
4
POINT OF CONNECTION. LINE SIDE TAP BETWEEN BUILDING SERVICE DISCONNECT AND SDG&E
METER. PROVIDE CODE COMPLIANT LUGS AND ASSOCIATED INSTALLATION PER SWITCH GEAR
MANUFACTURERS (SIEMENS) REQUIREMENTS.
5
BATTERY STORAGE SYSTEM POWER MONITOR
SERVICE TYPE: THREE PHASE WYE
277/480 VOLT INPUT POWER
3 CURRENT CHANNELS 0-5000 AMPS
LINE FREQUENCY 60Hz
WAVEFORM 12KHz
MEASUREMENTS - VOLTAGE, CURRENT, kW, KWh, KVAR, KVA, KVAH, APPARENT POWER,
DISPLACEMENT POWER FACTOR, ALL PARAMETERS FOR EACH PHASE AND TOTAL SYSTEM.
99% ACCURACY MIN.
CAPABLE OF INTERFACING WITH MANUFACTURERS WEB BASED SOFTWARE
FACILITY:
EXISTING
PANEL
"HL2"
3. PRIOR TO COMMENCEMENT OF WORK, CONTRACTOR SHALL CONTACT AND COORDINATE
INSTALLATION OF NEW BATTERY SYSTEM WITH SERVING UTILITY (SDG&E).
EXISTING PULL/SPLICE SECTION
6
1#8 GROUNDING ELECTRODE CONDUCTOR TO BUILDING STEEL.
7
PROVIDE NEW KILOWATT HOUR METER EQUAL TO POWER MEASUREMENT 7350 WITH ETHERNET PORT
FOR DATA TRANSFER. METER SHALL BE REVENUE GRADE AND MEET SDG&E REQUIREMENTS FOR
INCENTIVE VERIFICATION.
8
FEEDER RACEWAY SYSTEM SHALL BE LABELED "BATTERY STORAGE SYSTEM AT 10'-0" INTERVALS.
9
INSTALL NEW NGO (NET GENERATION OUTPUT) METER SOCKET. METER PROVIDED BY SDG&E.
COORDINATE INSTALLATION AND ADDITIONAL REQUIREMENTS WITH SDG&E.
10
PROVIDE NEW 400 AMP, 3 POLE, 600V FUSED DISCONNECT IN NEMA 3R ENCLOSURE. FUSE SHALL BE
BUSSMAN FRS-400 AMP CURRENT LIMITING.
TO EXISTING TENANT
DISTRIBUTION EQUIPMENT
EXISTING
TO 400 A&B
"GL"
KEY PLAN
EXISTING
PANEL
"HP2"
SINGLE LINE DIAGRAM
1
4" MIN. REQUIRED
TOP OF CLEARANCE
1
1
1
1
FRONT
SIDE
TOP CAP
TOP CAP
POWER BLADE
BATT.
PACK
BATT.
PACK
4-6"
ADJUSTABLE
REAR MOUNTING
BRACKET
BATT.
PACK
POWER BLADE
BATT.
PACK
BATT.
PACK
BATT.
PACK
36" REQUIRED
FRONT CLEARANCE
POWER BLADE
82.83"
BATT.
PACK
BATT.
PACK
4" MIN. REQUIRED
REAR CLEARANCE
BATT.
PACK
File path: Z:\SD15120.00\CAD\Autocad\E\ E101.dwg 12/17/15 08:48 RL tdiep
BATT.
PACK
EXISTING BRANCH CIRCUIT TRANSFERRED FROM DEMOLISHED PANEL "HL2". EXISTING BRANCH CIRCUIT DESCRIPTIONS ARE BASED ON EXISTING
AS-BUILTS DRAWINGS, EXISTING PANELBOARD DIRECTORIES AND/OR CASUAL FIELD OBSERVATIONS . THE CIRCUIT NAMES AND LOADS THEY SERVE
HAVE NOT BEEN VERIFIED. ELECTRICAL CONTRACTOR SHALL CIRCUIT TRACE EXISTING UNIDENTIFIED CIRCUITS AND UPDATE PANELBOARD
DIRECTORY.
1
BATT.
PACK
EXISTING BRANCH CIRCUIT TRANSFERRED FROM DEMOLISHED PANEL "HP2". EXISTING BRANCH CIRCUIT DESCRIPTIONS ARE BASED ON EXISTING
AS-BUILTS DRAWINGS, EXISTING PANELBOARD DIRECTORIES AND/OR CASUAL FIELD OBSERVATIONS . THE CIRCUIT NAMES AND LOADS THEY SERVE
HAVE NOT BEEN VERIFIED. ELECTRICAL CONTRACTOR SHALL CIRCUIT TRACE EXISTING UNIDENTIFIED CIRCUITS AND UPDATE PANELBOARD
DIRECTORY.
1
BATT.
PACK
BATT.
PACK
10/08/15
Description
Date
CIRCUIT BREAKERS SHALL BE CAPABLE OF REVERSE FEED OPERATION.
DATE:
11/04/2015
SCALE:
AS NOTED
PROJECT NO:
SD15120.00
DRAWN BY:
RG
DESIGN BY:
RG
CHECKED BY:
RB
SHEET TITLE:
BATT.
PACK
POWER BLADE
BATT.
PACK
REVISIONS:
POWER BLADE
BATT.
PACK
12/16/15
N0.
82.83"
POWER BLADE
BATT.
PACK
1
ADDENDUM #1
BATT.
PACK
TYPICAL BATTERY RACK ELEVATION
BASE
BASE
19.7"
21"
SINGLE LINE DIAGRAM,
PANEL SCHEDULES AND
LOAD SUMMARIES
SHEET NO.:
E-101

4951Trade Street Integrated PV Storage System

Transcription

Similar documents

Every Day Counts in Improving Mobility: A l d B id C i Every Day

LIFEPAK 500 Maintenance Checklist

PDF Lot View

PDF Lot View

DOS SD-STD-02.01 K12 L3 ASTM F2656 M50 P1

Lambourgini Murcielago Ride On Car Manual

Pay Application #4 - the Public Building Commission of Chicago

Battery Guide V3

Mega Plexxus Instruction

PI PM 530, 637745 Plus-En