CS-UK-DOMINOS-HQ-SEPT11-d [Compatibility Mode]
Transcription
CS-UK-DOMINOS-HQ-SEPT11-d [Compatibility Mode]
Case Study : Domino’s Pizza HQ CASE STUDY Milton Keynes , UK. // November 2011 Project information Project name / location Domino’s Pizza Head Office, Milton Keynes, UK. Project Team Architects : Q2 Main Contractor : Buckingham Group M&E Consultant : Couch Perry & Wilkes M&E Contractor : Walter Miles Building Services Date January - November 2011 Building type Offices Suspended services Rectangular ductwork, electrical containment, chill beams, lighting and pipework Products Gripple Trapeze. Gripple Barrel end fixing with concrete screw kit Gripple Ltd. The Old West Gun Works, Savile Street East, Sheffield, S4 7UQ, England. Tel +44 114 275 2255 : Fax +44 114 275 1155 : Email‘[email protected] www.gripple.com Project outline This striking new headquarters for Domino’s Pizza with over 2,000 sq. metres of floor space will not only house 150 employees within its core functions of Marketing, Business Development, IT, Customer Support, Finance and HR, but will also be home to a state-of-the-art state test kitchen for developing key new products, that no doubt will be scrutinised in the penthouse boardroom. The building also achieves the BREEAM rating of excellence (Building Research Establishment Environmental Assessment Method) with the innovative technology used to support sustainability throughout the project build and also on a day-to-day day basis. It is not only the technical aspects of the of the building that have been considered for this level of excellence but also the improved working environment offered to the staff – for instance, all the office space is within 7 metres of a window, so everyone benefits from natural light. The open plan design called for the services to be exposed and the Gripple Hangers offered a neat and aesthetic solution to supporting both M&E and HVAC services. Gripple Duct Trapeze with barrel end fixing Gripple Hangers have far less visual mass than threaded rod and channel, leaving the services with a floating look, ideal when they are exposed. Combine this with the barrel end fixing for a sleek finish to the installation. The concrete screw comes with anGripple M8 male Hanger thread and the barrel end fixing screws directly onto this for a neat, flush finish to the ceiling. All parts are supplied as a ready-to-use kit from Gripple. The contractor has used Gripple solutions extensively in the past, however the barrel end fixing was used for the first time throughout the building for its improved aesthetic qualities. Gripple Standard Hanger with barrel end fixing Additionally, the new Gripple Duct Trapeze, also offered an improved installation not only at ceiling level but at the duct level too. Instead of using heavy threaded rod and channel, the Gripple Duct Trapeze replaces both of these elements. This lightweight solution delivers on many fronts… Installation time is significantly reduced Visual impact is minimised Working at height is reduced CO2 saving contribute towards the excellence BREAAM status of the project…. Gripple Duct Trapeze Using Gripple compared to traditional threaded rod and channel offers massive CO2 savings, contributing to the fundamental principles of a BREEAM build. For every metre of wire rope specified instead of rod, it’s estimated that a saving of 1.2kg of CO2 will be made. That equates to a total CO2 saving of 95% when switching from threaded rod to wire rope. Add to this calculation that when using the Gripple Duct Trapeze, that no channel is required, meaning there is no cutting channel on site (no hot works permits), meaning no power used either, and the CO2 figures really start to make an impact. Gripple G-bracket “ The architect was very specific in regard to all services above the ceiling raft being visible, therefore the incorporation of the barrel fixing and trapeze arrangement for Gripple Hanger duct supports provided the ideal solution to meet his particular requirements”. Mechanical Engineer - Walter Miles. Visit www.gripple.com for more Gripple case studies Gripple Ltd. The Old West Gun Works, Savile Street East, Sheffield, S4 7UQ, England. Tel +44 114 275 2255 : Fax +44 114 275 1155 : Email‘[email protected] www.gripple.com