Y.XST225-VF

Transcription

Y.XST225-VF

Aerospace Testing 2011
Hi-end X-ray inspection – no longer
for labs only
Dr. Malte A. Kurfiß, Product Manager
Technology with Passion
Contents
High resolution without micro-focal spot
X-ray tube
Digital filter image enhancement not
only for experts
Computed tomography outside the hightech lab
06.04.2011 | 2
High resolution without micro focal spot X-ray tube
Y.XST225-VF
Conventional closed Xray systems
Open micro-focal spot Xray systems
Reliable
High Power
Low-medium resolution
Very high resolution
Low power
Open vacuum system
Y.XST225-VF
06.04.2011 | 3
Y.XST225-VF
Variable
obtain the best image by optimizing the focal spot to your application
fast
reduce inspection time by using the maximum power available at the
required focal spot size
high resolution
better detail visibility than with
fixed focal spot X-ray tubes
06.04.2011 | 4
Y.XST225-VF – high detail visibility
Y.XST225-VF
conventional X-ray system
06.04.2011 | 5
Y.XST225-VF
Does the crack touch
the structure?
No!
Does the crack touch
the structure?
Not visible!
06.04.2011 | 6
Y.IMAGE 3500 - Spatial Resolution acc. EN-642-5
Duplex Wire acc. EN-642-5
06.04.2011 | 7
Y.XST225-VF vs. conventional X-ray
06.04.2011 | 8
Y.XST225-VF
06.04.2011 | 9
Calculation of the total
unsharpness in the sample by
evaluation of EN462-5
Duplex-Wire. The interpolated
value at 20% contrast in the
line profile is the result for the
total unsharpness
Resolution
horizontal resolution
Resolved Duplex Wire
Resolution in [%]
Resolved Wire Resolution [µm]
Total unsharpness [µm]
DW >20%
D10
36,4
100,0
DW <=20%
D11
15,2
80,0
84,53
06.04.2011 | 10
Power (W)
2000
1500
Vario focus tube
Fixed focus tube
1000
500
50
75 84 100
125
150
175
200
225
250
Total unsharpness (µm)
Open micro-focal spot X-ray systems
06.04.2011 | 11
Unique benefits of Y.XST225-VF
Focal spot size can be optimized for the application and provide a
maximum in detail visibility
Minimum effective focal spot of 80 µm and 292 W power
Circular Focal spot for best image quality
More Power than any µ-focal spot tube up to 1600 W
Closed Design in a standard 225kV housing with standard H.V.-cable
06.04.2011 | 12
Digital filter image enhancement not only for experts
Digital Flat-Panel Detectors
7
x 10
4
120 kV, 6 mA
6
frequency value
5
4
3
2
1
0
0
0.2
0.4
0.6
0.8
1
shade of gray
~ 40.000 gray values
06.04.2011 | 13
The Human Eye
Field of view 180° x 130°
About 16 million colors
6
x 10
5
HDR @ 120 kV, 5 mA
frequency value
5
4
3
2
1
0
0
0.2
0.4
0.6
0.8
1
shade of gray
But only 60-80 grey values!
06.04.2011 | 14
Conventional digital image enhancement
original
9
2
7
2
2
8
8
6
5
3
7
5
3
3
3
3
2
9
2
4
8
4
4
5
5
enhanced
-1
-1
-1
-1
-1
-1
0
3
0
-1
-1
3
5
3
-1
-1
0
3
0
-1
-1
-1
-1
-1
-1
Matrix of a sharpness filter
06.04.2011 | 15
HDR - High Dynamic Radioscopy
06.04.2011 | 16
HDR - Easy to use sliders
0%
50%
90%
06.04.2011 | 17
HDR in Y.Imagex600
06.04.2011 | 18
Computed tomography outside the high-tech lab
CT with the Y.Multiplex
06.04.2011 | 19
Precise manipulator enables high quality CT
06.04.2011 | 20
Workflow of the Y.Multiplex CT AddOn
Press „Start“
06.04.2011 | 21
06.04.2011 | 22
Scrolling through CT – slices and e.g. measure flaws
Measurement with “magic wand”
Jump to predefined views
06.04.2011 | 23
Scrolling through CT slices
Click on the “Front”, “Left” or
“Top” thumbnails to select your
view
Selected view will be displayed
on the screen
Use the mouse wheel to scroll
through the layers
Position the mouse on the red,
green or blue sliders to “move”
through your inspection item
06.04.2011 | 24
Automated export into 3D analysis software
Actual/nominal comparison
Porosity analysis
06.04.2011 | 25
Chapter title - via View / Header and Footer
Summary
Many Technologies are no longer available for experts only,
but are know implemented in easy to use YXLON equipment
Y.HDR enables the operator to obtain a
maximum of information
Y.Multiplex CT AddOn provides a 3D
information with only one click
all integrated
Y.XST225-VF a high resolution X-ray source
combines the benefits form closed X-ray tubes
with micro focal spot technology
06.04.2011 | 26
© 2010 YXLON International GmbH
Thank you for your attention.
Please visit our booth: H45
or register for a factory tour!
YXLON International GmbH
Essener Bogen 15, D-22419 Hamburg
T +49 40 52729 0, F +49 40 52729 170
Technology
with Passion
[email protected],
www.yxlon.com
Cone Beam CT – Basics

:
Note: data preliminary. Data may slightly change due to new detector
housing.
Simple Field of View (FOV) Y.Multiplex with 400mm turntable
FDDMAX = 1070 mm
FODMAX = 790 mm
FODMIN = 400 mm
=> M = 1,35
=> M = 2,7
DFOV = 147 mm
DFOV = 74 mm
HFOV = 120 mm
HFOV = 61 mm
Simple Field of View (FOV) Y.Multiplex with 600mm turntable
FDDMAX = 1070 mm
FODMAX = 730 mm
FODMIN = 500 mm
=> M = 1,55
=> M = 2,1
DFOV = 128 mm
DFOV = 93 mm
HFOV = 105 mm
HFOV = 76 mm
Simple Field of View (FOV) Y.Multiplex with 160mm three jaw chuck
FDDMAX = 1070 mm
FODMAX = 830 mm
FODMIN = 280 mm
=> M = 1,3
=> M = 3,8
DFOV = 154 mm
DFOV = 52 mm
HFOV = 126 mm
HFOV = 43 mm
06.04.2011 | 28
Parameters and Timing – Scanning Time QualityScan
The measured times may vary due to Windows properties
The “signal” green values are based on “rule of thumb” (number of
projections = detector pixel number multiplied by square root of 2)
Investigation not yet finished, but 5 frames integration in QualityScan
seems to be a good compromise between image quality and time
06.04.2011 | 29
Parameters and Timing – Scanning Time Y.QuickScan®
The position precise Y.Quickscan® of the Y.Multiplex is very fast
The “signal” green value are based on “rule of thumb” (number of
projections = detector pixel number multiplied by square root of 2)
Acceptable CT slices (180° rotation, 180 projections) can be done with
a complete time of 18 seconds from start to “slice view ready” !!!
Note: Please never confirm scan-times and/or reconstruction times – especially with detail
visibility - in a contract without checking the application. The 18 seconds means: No center
displacement calculation, 512* 512 * 8 layer volume. Quality see image on later slide.
06.04.2011 | 30
The workflow of manual mode
1.
Selection of operation mode: DR or CT
2.
Confirmation by joysticks: Part moves to predefined default position
for CT or DR, predefined X-ray settings are set
06.04.2011 | 31
The workflow of manual mode
5. Scanning, reconstruction (if not skipped)
and visualization
Estimated remaining time for scan,
reconstruction and results.
Elapsed time shown in tooltip.
06.04.2011 | 32
Y.XST225-VF
small crack
?
06.04.2011 | 33

Y.XST225-VF

Transcription

Similar documents

Firestarter PDF for PPSC Members

Service Times - His Word Ministries

Luxclassics

IN STEP

Latangela Hyman - Great Lakes Cru

Agri-Service

Vladimir Tretchikoff

The company operates more than 40 stores in 7 states. 10 SPOT

Refurbished OEC 9600 C-arm - Eastern Diagnostic Imaging

Refurbished OEC 9600 C-arm - Capital X