Untitled

Transcription

Untitled

Contents
1. Kiteboards
1-1
Technology (Updated 26-07-06)
1-2
1-3
1-4
1-5
1-6
1-7
1-8
1-9
Square (Updated 26-07-06)
Switch (Updated 26-07-06)
X-Pact (Updated 26-07-06)
Protoy/Exile (Updated 26-07-06)
T-3 (Updated 26-07-06)
Converse (Updated 26-07-06)
Hammer (Updated 26-07-06)
Airforce (Updated 26-07-06)
2. Kites
2-1
Kite Technology (Updated 11-08-06)
2-2
2-3
2-4
2-5
2-6
DNA (Updated 17-08-06)
Flow (Updated 26-07-06)
Halo (Updated 17-08-06)
Lift (Updated 17-08-06)
Reactor (Updated 26-07-06)
3. Control Bars
3-1
3-2
3-3
3-4
DNA Control Bar (Updated 28-09-06)
Flow Control bar (Updated 27-09-06)
Halo Control Bar (Updated 27-09-06)
Lift/Reactor Control Bar (Updated 28-09-06)
4. Board Components and Accessories
4-1
Technology (Updated 15-08-06)
4-2
Fins (Updated 17-08-06)
4-3
Traction (Updated 26-07-06)
4-4
Boardbags (Updated 26-07-06)
4-5
Footstraps General Board Components
(Updated 26-07-06)
5. Kite Components and Accessories (Updated 11-08-06)
5-1 Kite Accessories
5-2 Bladder
6. Control Bar Components and Accessories (Updated 11-08-06)
6-1 Control Bar Components and Accessories (Updated 17-08-06)
6-2 Trigger Release Components (Updated 17-08-06)
6-3 Depower Components (Updated 17-08-06)
6-4 General Plastic Parts (Updated 17-08-06)
6-5 Flying Lines (Updated 17-08-06)
7. General Components and Accessories (Updated 11-08-06)
7-1 Waist Harness, Seat Harness, Impact Vest (Updated 11-08-06)
7-2 Water Apparel (Updated 11-17-06)
7-3 Promotional Apparel (Updated 11-17-06)
7-4 Promotional Flags and Banners (Updated 11-17-06)
7-5 Stickers & Point of Sale (Updated 11-17-06)
7-6 Advertisements (Updated 11-17-06)
Subject to change without notice
Last Update : 11.08.2006
1-1 Technology
Board Technology
At Airush our passion for building the ultimate kiteboards verges on religious fanaticism. We don’t believe there is one technology that will suit all
riding styles and understand the diversity of conditions around the world.
As kiteboarding diversifies, Airush has focused on developing various core, rail and laminate technology to ensure the best strength to weight ratio
in each product.
New developments on high volume boards such as the Flytech Construction ensure we can offer reduced weight in the Converse and Square
series. In lower volume products such as the Protoy where massive amounts of flex and damage tolerance are required, we have developed the
definitive spinal core.
In its second year, our unique Biotech vertical wood sandwich, has proven itself as a benchmark for durability and smooth responsiveness.
Core Technology & Construction Technology
Kiteboards are exposed to a complex matrix of forces that place significant load on the laminates and cores. Through ongoing development we
have optimized the strength, durability and flex response to meet the demands of each rider group.
Too much board flex is not always a good thing. Riders who are heavier or ride more overpowered would generally prefer a slightly stiffer board.
Riders who are lighter or prefer to ride with slightly less power would normally prefer a slightly more flexible board.
Flytech Construction
The Flytech construction is most suitable for high volume kiteboards due
to its low density and therefore lighter core weight. The lightweight core is
combined with unidirectional and standard glass. This ensures the boards
remain as light as possible and still survive the abuse. Our unique process
allows us to customize the core density based on the volume of the board
and allowing various outer skin constructions.
The Flytech construction allows us to feature a “shaped” rail, which is more
forgiving and ideal for entry level and surf oriented products.
Biotech Construction
The Airush Biotech construction is a spin of from snowboard technology
where a vertical wood core sandwich is combined with a stepped
construction and an ABS rail. Wood cores have long been renowned for
their feel and smoothness, we combined this with a triaxial construction, his
ensures a perfect blend of flex, response and durability.
PPT top and bottom.
Spinal Core (Now with CRT and Custom X)
Only used on our Protoy, the new Spinal core features an exclusive linear
foam core for unparalleled damage tolerance and sheer force strength. For
07 our unique “Custom X” laminate enable us to fine tune each board size
for maximum pop and response. A combination of wood and glass
reinforcing is used around the heel area.
The Spinal core offers a strength to weight ratio that is the pinnacle of years
of intensive research.
Technology
X-link LT Construction (Now with Custom X)
LT
Our high performance construction illustrating perfect flex and a bombproof construction. Boards featuring our X-Link Lt
construction use a combination of the X-Link PVC core with
unidirectional and biaxial cloth, together with wood reinforcing in the high impact
heel areas. A full top and bottom rail wrap allows for a soft “shaped” rail ensuring
the board is more forgiving and stable to ride.
A PPT layer on the bottom deck enhances the durability
without limiting the flex characteristics.
X-Link ABS Construction (Now with Custom X)
ABS
Our unique X-Link ABS Construction combines the perfect flex and strength
characteristics of our X-Link PVC core, with a virtually indestructible ABS rail.
The ABS section is inset into the laminate and forms a “grindable” rail that can
withstand a significant amount more abuse than a wrapped rail construction. This
construction uses a combination of unidirectional and biaxial cloth together with
asymmetrical wood reinforcing in the high impact heel area.
A PPT layer on the bottom deck enhances the durability
without limiting the flex characteristics.
•
• • • •• • •
Custom – X
Custom X lamination allows us to fine tune every model and size of board by
making adjustments to the angle and orientation of the glass within the
laminate. This improves the consistency of flex between each size and model as it
allows us to optimize it based on differences, in length, width,
thickness and rider requirements of each board.
CRT
Featured only in our Protoy range, CRT (Carbon Response Tips) have allowed us
to reduce the thickness in the tip of the board for increased flex,
and at the same time increase the pop and response of the tips, through the use
of high modulus carbon fiber in the top and bottom laminates.
1-2 Square
Series
Back to square One
Product Overview:
• Completely redesigned for 2007, New Biotech core technology and
innovative EVA flip tips.
• Meets the demand of schools and the progressive entry-level market.
• Extremely durable construction
• Short waterline for improved high wind performance, increased width for improved low wind performance.
Code
Model
AB07SQ1 Square One
AB07SQ2 Square Two
Sizes
148cm x 52cm
148cm x 47cm
Target User:
• Complete beginners and first time price conscious customers. The
size range satisfies skill levels from schools through to
intermediate. The unique design with increased width allows the rider to use safer smaller kites.
• Square 1 is aimed at medium to heavy weight learners (70 Kg +)
perfect for all school and rental situations.
• The Square is aimed at lighter learners (Under 70 Kg) and higher
wind test centers.
• The Square 2 is also the perfect first board to purchase, due to the
versatility of the size and can double as a light wind freeride board.
Compared to the Switch
• Increased width for maximum stability and early planning.
• Eva flip tip for increased safety and earlier easier starting
Tech Features
Rails
Shaped ABS rails for a forgiving ride as the do not catch when turning.
Rocker
Three stage rocker optimized for upwind performance and early planning.
Bottom shape
Our Unique “Eye” concave ensure early planning, stability at speed and a
softer ride in chop.
Outline
Derived from our switch Series the Square 1 & 2 feature increased width for
ease of use and stability especially in lighter wind. The relatively short length
increases the high wind ease of use.
Fins
The wake series fins offer a combination of good tracking while being
forgiving when turning. Heel fins ensure the Squares are easier to drive
upwind and hold the heel edge in.
Construction
Biotech
The Airush Biotech construction is a spin of from snowboard technology
construction and an ABS rail. Wood cores have long been renowned for their
feel and smoothness, we combined this with a triaxial construction ensuring
awesome flex, response and durability. Topsheet top and bottom.
VerticalWood
Sandwich
600g
Triaxial
600g
Triaxial
PBTBase
ABSrails
PBTDeck
1-3 Switch
Series
New adventures in freeride.
Product Overview:
• Legendary versatile performance with all new shapes.
• Ultimate one board option
• Bombproof general use construction
Code
AB07SW144
AB07SW138
AB07SW130
Model
Switch 144
Switch 138
Switch 130
Sizes
144cm x 44cm
138cm x 42cm
130cm x 40cm
Target User:
Intermediate rider looking for upwind performance and all-round versatility.
Larger sizes ideal for progressive first time buyers.
Compared to the Square Series
The reduced width and dedicated freeride design is oriented towards more
advanced riders.
Compared to the X-Pact
Increased width for early planning and ease of use.
Increased length for stability and upwind performance.
Rails
ABS rails for a combination of durability and a forgiving ride.
Rocker
The three stage rocker is combined with the “eye” single concave this
unique concave
Flex
Intermediate flex offers good low wind performance combined with a smooth
ride.
Bottom shape
Our Unique “Eye” concave ensure early planning, stability at speed and a
softer ride in chop.
Outline
CAD scaled outlines give the switch range a consistent feel in all sizes.
The Switch outline features a wide center point with relatively narrower tips.
The width ensures ease of use and early planning while the narrower tips
increase control an edging when at speed.
Fins
The wake series fins offer a combination of good tracking while being
forgiving when turning. Heel fins ensure the Switch’s are easier to drive
upwind and hold the heel edge in.
Construction
Biotech
The Airush Biotech construction is a spin off from snowboard technology
construction and an ABS rail. Wood cores have long been renowned for their
feel and smoothness, we combined this with a triaxial construction ensuring
awesome flex, response and durability. Topsheet top and bottom.
VerticalWood
Sandwich
600g
Triaxial
600g
Triaxial
PBTBase
ABSrails
PBTDeck
1-4 X-Pact
The ultimate freeride / freestyle Blend.
Product Overview
• Freestyle oriented design with stepped tips for incredible flex and
response.
• Slightly bigger sizes for 2007 for improved freeride performance.
Code
AB07XP139
AB07XP132
AB07XP125
Model
X-Pact 139
X-Pact 132
X-Pact 125
Sizes
139cm x 42cm
132cm x 40cm
125cm x 38cm
Target User:
Intermediate to advanced riders who want a bombproof board. The new
concave bottom has increased the stability of the X-Pact increasing its
appeal to a wider rider group.
Compared to the Protoy:
The X-Pact features a PPT base for increased durability making it more
suitable for freeriding and general abuse. Narrower tail for slightly more
stability and control.
The X-Pact has single concave bottom and square tips.
Compared to the 06 X-Pact:
Bigger sizes than 06 for improved freeride performance.
New shapes with progressive rocker and outlines.
Rails
Square ABS rail for durability and a fast clean water release.
Rocker
3 stage “competition” rocker for speed and early planning
Flex
Custom X construction for a perfect balance of Flex and Pop.
Bottom shape
Combining a single concave bottom with our legendary 3 stage rocker.
Overall Planform
A relatively parallel outline with medium wide tips offers a good
combination of edging, stability at speed and pop.
Fins
The metro fin Series offers increased grip, with reduced drag through the
refined foils shape and reduced chord.
Construction
X-Link ABS Construction
The ABS section is inset into the laminate and forms a “grindable” rail that
can withstand a significant amount more abuse than a wrapped rail
construction. This construction uses a combination of unidirectional and
biaxial cloth together with asymmetrical wood reinforcing in the high impact
heel area.
Custom
X
PVCCore
A top sheet layer on the bottom enhances the durability without limiting the
flex characteristics.
2xUD205g
CustomX
PPTBase
Glass200g
ABSrails
2xUD205g
CustomX
Biaxial160g
GlossPBT
Wood0.6mm.
1-5 Protoy
Icon technology
Product Overview
• Engineered contest versatility.
• Our most advance construction featuring Spinal Core, CRT and Custom X.
• Range includes an all new Exile/Protoy for 2007, combining the awesome lightwind performance of the Exile with the design philosophy and performance of the Protoy.
• Unique double concave bottom and flip tip ends effortlessly soak
up chop while ensures the softest landings.
Code
AB07PE135
AB07PR135
AB07PR129
AB07PR122
Model
Protoy/Exile
Protoy 135
Protoy 129
Protoy 122
Sizes
135cm x 47cm
135cm x 41cm
129cm x 39cm
122cm x 37cm
Target User
Dedicated freestyle rider looking for zero compromise in performance. Compared to the X-Pact
The flip tip design and double concave bottom is more suited to choppy
conditions.
The non topsheet construction is less suited towards sliders and general
abuse.
The spinal core provides increased strength.
Wider tips offer more pop, combined with CRT for increased respons.
Rails
By adding a shaped ABS rail for 2007 the Protoy has the forgiving ride of a
board with custom rails combined with the durability of ABS.
Rocker
3 stage “competition” rocker for speed and early planning. The flip tip design
prevents the nose from catching in choppy conditions.
Flex
The new Spinal core has allowed us to reduce the core thickness slightly to
offer increased Flex over 2006. The unique damage tolerance of the Spinal
core ensures long-term flex performance.
Bottom shape
The double concave bottom softens the ride in choppy conditions, increases
the directional stability at speed and enhances edging and low wind
performance.
Planform
The wide tips of the Protoy insure huge amounts of pop for the most
progressive riding possible.
Fins
The new Metro Fin Series offer increased grip, with reduced drag through
the refined foils shape and reduced chord.
Custom
X
Corecell/SpinalCore
Construction
Spinal Core
Only used on our Protoy, the new Spinal core features a unique linear Foam
core for unparalleled damage tolerance and sheer force strength. This is
combined with a blend of uni directional and biaxial laminate for perfect flex,
response and durability. A combination of wood and glass reinforcing is used
around the heel area.
Glass200g
2xUD205g
CustomX
2xUD205g
CustomX
Biaxial160g
MattGelcoat
Gelcoat
Glass200g
ABSrails
Wood0.6mm.
1-6 T-3
Redefining progressive freestyle riding
Product Overview
• Developed for the aggressive free style rider with a passion for
rails, sliders and kicker (or whatever pops up.)
• The unique aggressive channel bottom design allows for the use
of fins 50% smaller than on traditional kiteboards without loosing
any edging ability.
• Standard with straps and pads, which can be removed to fit
bindings.
Code
AB07T3134
Model
T3 - 134 Sizes
134cm x 40cm
Target User:
Aggressive freestyle rider with a fetish for sliders and kickers.
Compared to X-Pact:
The T-3 is wider for earlier planning and lower speed approaches to
obstacles. Finless option for hardcore slider kicker riding. Binding
compatible.
Compared to the 06 T-3:
Increased length reduces drag and provides earlier planning with higher
speed.
Rails
Square ABS rails for increased durability and early planning.
Rocker
3 stage “competition” rocker for speed and early planning. The channeled
center features a slightly increased rocker to prevent the nose from catching.
The Outer rails have a slightly flatter rocker for increased edging.
Flex
A new approach in flex derived from wakeboarding orients the flex point on
the center of the board. This makes the T-3 ideal for more powered moves.
Bottom shape
The unique integrated Fin bottom shape delivers the same edging feel as a
board with fins double the size.
Planform
The wide outline with larger tips ensures early planning and maximum pop.
Increased length for 07.
Fins
Dedicated T-3 fins are integrated into the channels of the board. The fin
outline is developed to flow easily over obstacles. Dual screw inserts to keep
fins firmly in place.
Construction
The ABS section is inset into the laminate and forms a “grindable” rail that
can withstand a significant amount more abuse than a wrapped rail
heel area.
Custom
X
PVCCore
2xUD205g
CustomX
PPTBase
Glass200g
ABSrails
2xUD205g
CustomX
Biaxial160g
GlossPBT
Wood0.6mm.
1-7 Converse
Product Overview
• Airush introduced the first true convertible in 2006 and have taken
this concept to a new level for 07.
• 6’0” Model for lighter riders and higher wind conditions.
• Developed specifically to replace your light wind kite board in your
quiver and give you the freedom to have one board for traveling
- surfing and kiting.
Code
AB07CN62
AB07CN60
Model
Airush Converse - 6’2”
Airush Converse - 6’0”
AB07CW62
AB07CW60
Airush Converse Wood - 6’2”
Airush Converse Wood - 6’0”
Sizes
189.5 (6.2”) x 47.5 (18 3/4)
183 (6.0”) x 46 (18 1/4)
189.5 (6.2 ”) x 47.5 (18 3/4)
183 (6.0”) x 46 (18 1/4)
Target User:
• Traveling kiter who wants the versatility of having a surfboard for no wind days and a light wind kiteboard.
• Dedicated strapless or strapped surf kiter who would like to have the
enhanced durability when compared to a normal surfboard.
Compared to Exile and switch 144:
Directional design for more dedicated wave performance.
Tech Features:
Rails
Tucked surf rails based on a small to medium wave surf requirements
Rocker
The Converse 6’2 features a rocker oriented towards smaller wave surfing
and light wind kiting. The 6’0” is a more progressive rocker for all round wave
use.
Flex
A Biaxial layup ensures flex characteristics similar to a polyester surfboard,
but with the weight characteristics of sandwich construction.
Bottom shape
Single concave bottom for early planning, control and a smooth ride in chop.
Outline
A dedicated small to medium wave Surfboard outline. This works together
with all the other aspects of the Converse 6’2” design for perfect waveriding in
light to medium wind conditions.
6’0” features a more progressive outline for all round wave use ideal for
bigger waves or higher wind use.
Fins
FCS fins with PVC reinforced inserts
Flytech
The Flytech construction is suitable for high volume kiteboards due to its low
density and therefore core weight. The lightweight core is combined with
unidirectional and standard glass. This lay up ensures that the boards remain
as light as possible and still survive the abuse.
The Flytech construction allows us to feature a tucked rail shape, which is
more forgiving and ideal for surf oriented products.
GlassBiaxial220g
Glass50/50200g
HighDensityEPS
Seamless
Customshapedrails
Glass200g
Standard Construction
MattGelcoat
Glass200g
PVCSandwich
Glass200g
MattGelcoat
GlassBiaxial220g
Glass50/50200g
GlassBiaxial220g
Glass50/50100g
HighDensityEPS
Sandwich
Glass200g
0.6Wood
OuterSandwich
Wood Construction
GlassBiaxial220g
Glass50/50100g
HighDensityEPS
Sandwich
Glass200g
1-8 Hammer
Product Overview
• Developed from a traditional twintip and worked to enhance the wave riding capabilities radically without loosing the ease of use.
• Originally conceived to be a dedicated wave riding twintip the Hammer also proved to be a huge stand out in very choppy conditions.
• Due to the popularity of this board a new 144 size has been introduced for heavier riders and lighter winds.
Code
AB07HA138
AB07HA144
Model
Sizes
Hammer 138 138cm x 38.5cm
Hammer 144 144cm x 42cm
Target User
Rider who still wants twin tip versatility but rides in waves.
Rider who kites in extremely choppy and rough conditions, or prefers a
slightly longer board.
Compared to the Protoy
Rails
Tucked Surf Rails through the center of the board to allow a positive driving
bottom turn. A hard edge through the last 1⁄4 of the board to keep speed and
bite when coming off the top.
Rocker
Three stage “Wave” rocker with slightly increased rocker in the tip area for
clearance and increased turning.
Tip Shape and Flex
A narrower tail with more curve in the rear section of the outline, combined
with reduced thickness and increased flex in the tail. The result is maximum
snap when coming off the top.
Bottom shape
Double V Concave into spiral V – This bottom shape was developed with
two outcomes in mind. Firstly to enhance the directional stability of the board
without the need for massive fins and secondly to give a positive drive when
rolling the board over from the heel edge to the toe edge when initiating a
turn.
Overall Planform
Compared to a medium size freestyle board the Hammer has increased
water line length and a slightly narrower width to enhance stability on the
wave
Fins
The Code fin provides maximum grip for waveriding and is designed to limit
the front catching.
Construction
X-link LT Construction
Our premium construction illustrating perfect flex and a bombproof
construction with our X-Link PVC core. Boards featuring our X-Link Lt
construction use a combination of the high density core with unidirectional
and biaxial cloth, together with wood reinforcing in the high impact heel
areas. A full top and bottom rail wrap allows for a soft hand shaped rail
ensuring the board is more forgiving and stable to ride.
Custom
X
PVCCore
Glass200g
A top sheet layer on the bottom deck enhances the durability without limiting
the flex characteristics.
CustomShapedRails
2xUD205g
CustomX
2xUD205g
CustomX
Biaxial160g
MattGelcoat
Gelcoat
Glass200g
Wood0.6mm.
1-9 Airforce
Target user:
Youth under 50 kg, who want a dedicated performance product for freeride
and freestyle.
Developed by KPWT world Champion Gisela Pulido.
Code
AB07AF110
Model
Sizes
Airforce 110 110cm x 34.5cm
Target User:
Youth riders up to 50 Kgs looking for dedicated performance.
Rails
Square ABS rail for durability and a fast clean water release.
Rocker
3 stage “competition” rocker for speed and early planning
Flex
Stiffer Center section with Flex tips
Bottom shape
Flat bottom for ease of use in freestyle and transitions.
Overall Planform
A relatively parallel outline with intermediate width tips offers a good
combination of edging, stability at speed and pop.
Fins
The metro fin Series offer increased grip, with reduced drag through the
refined foils shape and reduced chord.
Construction
characteristics of our X-Link PVC core, with a virtually indestructible ABS
rail. The ABS section is inset into the laminate and forms a “grindable” rail
that can withstand a significant amount more abuse than a wrapped rail
heel area.
Custom
X
PVCCore
600g
Triaxial
600g
Triaxial
PBTBase
ABSrails
PBTDeck
11.08.2006
2-1 Kite Technology
Kite Technology
2007 has seen a breakthrough in development of the
geometry of each specific model to meet each rider’s
performance requirement. We have focused on the unique
demands of each level and rider group and enhanced each
model to exceed their expectations.
Planform
With the introduction of swept wingtip designs, supported leading edges and
increased depower, planform is critical in determining a kites performance.
The figure below illustrates the huge differentiation between the curvature of
the leading edges, positioning of the wingtips in relation to the center of effort
and trailing edge shape.
Comparisons of the Lift and Reactor show the slightly more traditional shape
of the Lift when compared to the wider wingtips and reduced Span to chord
ratio of the Reactor.
With the Supported Leading edge kites (DNA, Flow & Halo) a more curved
leading edge allows easier relaunch, and works together with the swept
wingtip enhancing the depower.
Planform Details
Wingtip Configuration
A closer look at wingtip configuration and the positioning of the front tow
point on each design allows you to understand the effect on sheeting,
steering and depower.
On Hybrid Kites, the reduced sweep of the wingtip on the DNA and Flow
means a pulley system is not required to achieve a given amount of
de power. By avoiding the pulleys the steering is more direct with more
feedback from the kite, allowing you to “feel” where the kite is in the window.
Limiting the curvature of the leading edge reduces the relaunch slightly
(although still significantly easier than a C-Kite).
The larger sweep on the Halo’s (which offers the best rollover relaunch)
requires a 2/1 pulley ratio to ensure the bar remains within the riders reach
while allowing maximum sheeting.
Wingtip Details
A defining factor on the performance difference between the Reactor and Lift
is the difference in wingtip size. The wider wingtips on the Reactor allow the
kite to turn positively even at extreme angles of attack.
Foil shapes
Foil shapes on each model have been optimized to offer the best
compromise of speed and stability based on the rider requirements.
The finer the entry and shallower the draft, the faster the kite is through the
air, the easier it goes upwind and the less drag you have from the canopy.
By using a deeper draft and placing the C/E further forward (Less fine entry)
the kite becomes more stable and generates more low-end power with less
rider input.
This can be viewed below as a progression from the DNA as absolute ease
of use, to the Reactor on the other extreme for absolute performance.
Note: Profiles are exaggerated for illustration purposes
Kite Technology
Canopy Curve
A large amount of development has been put into varying the shape of the arc
on the canopy through a combination of bridling, Structural LE shaping and
canopy shaping.
Kites featuring a flatter Arc provide more power for a given kite size but can
be more prone to inversion especially when used with bridles. This should be
viewed in conjunction with the amount of sweep in the wingtips. In
addition flatter canopies allow more depower from the kite, as this increases
the kites ability to be sheeted out.
Canopies with a more traditional C shape have less drift and more
positive steering due to the increased vertical component in the wingtip, which
enhances directional stability.
By testing and optimizing each model of kite, and at the same time each size
of kite, we have ensured the best balance of performance and stability for
each user group.
Canopy Curve Details
Depower and Release Safety
By combining new developments in bridling and refinements of the kite designs, we
have been able to develop a range of kites that offer optimized depower, for maximum wind range and bar release safety on the SLE and BOW designs. C- Kites
offer the most positive steering while the trigger release is activated manually, which
engages the 5th line or reride. The DNA and Flow offer a combination of positive
steering with bar release as a primary safety and a backup system with the trigger
release. The Halo offers the most extreme bar release safety through the 2-1 Pulley
system on the control bar and the flattest canopy arc; the backup safety system is
the “trigger release”.
Reactor / Lift
(4/5 Line C Kite)
Key notes on Turning graph
By varying components such as foil shapes, planform and kite geometry we have
focused on define clear performance characteristic on each kite. These are defined
numerically in all sales material and should be clearly understood.
Key Notes on performance Graphs
Forward Speed
This can be defined as the speed with which the kite travels. Kites with a higher forward
speed will travel quickly through the air and to the edge of the power window in the
shortest period. Kites with a higher forward speed will generate a more immediate pull
or “drive”
Flow / DNA
(SLE)
Turning Speed
Turning speed defines the rate of change of direction for the kite once it has been
steered by the rider. It is important to understand that kites can have a high turning
speed without having a high forward speed. This should be noted in the differentiation
between Pivotal and power turning on each kite.
Low end power
The kites ability to generate drive at a lower relative wind speed.
Jumping
Halo (Bow)
The kites ability to provide a high lift component resulting in high altitude. Also referred
to as boost. A kites ability to have a high boost, does not always interpret into longer
hang time.
Hangtime
This refers to the kites “glide rate” and the kites ability to keep the rider in the air for as
long as possible.
Stability
This refers to the kites ability to maintain an normal flying position even if subjected to
poor rider input, mistakes and gusty wind conditions.
Relaunching
The kites ability to roll over and be re launched once crashed leading edge down or
sideways in the water.
2-2 DNA
Genetic Engineering
2007 DNA
COLOR SPEC. (CC.1)
2007 DNA
COLOR SPEC. (CC.2)
Product Overview
• A unique new concept combining the simplicity of a 4 line kite with the depower and safety of a BOW kite. • The super functional kite and bar configuration make the DNA
perfect for first time buyer and any riders looking for perfect ease of
use.
• Easiest kite in our range, fun for every rider and represents great value for money.
Control Bar overview
Dedicated DNA control bar featuring:
• Easy adjust 25m dedicated DNA flying line set allowing you to
quickly reduce flying lines from 25m to 15m for safer learning.
• One bar length (45cm) fits all sizes.
• Modular control bar design to allow for multi functional leash,
de power and line configuration.
Compared to 2006
• New product for 2007
Buy this kite if you want:
• Super functional performance combined with engineered simplicity.
• One kite to cover as many conditions as possible
Target customer
• Schools and rental centers
• Beginner to intermediate riders
• Advanced riders looking for simple and functional one-kite options. Especially in wave riding conditions.
Performance Characteristics
DNA
Key Selling points
• New generation design
• performance across a broad range of conditions
• Easy handling • Extremely predictable
• Simple to re launch • Ample low speed stability
• Aluminium shaft pump on all sizes
• Auto deflators on ball valves
• Heavy-duty bag with extendable section
• Excellent for all standards of rider
DNA Sizes and Components
Product Code
AK07DN04
AK07DN06
AK07DN09
AK07DN12
AK07DNK04
AK07DNK06
AK07DNK09
AK07DNK12
Page : 16
Model
Std Bar Length
DNA 4 - Complete
DNA 6 - Complete
DNA 9 - Complete
DNA 12 - Complete
DNA 4 - Kite Only
DNA 6 - Kite Only
DNA 9 - Kite Only
DNA 12 - Kite Only
45cm
45cm
45cm
45cm
45cm
45cm
45cm
45cm
Compatible Bar Length
55cm
55cm
2-3 Flow
BOW versatility, C-Kite functionality
2007 FLOW
COLOR SPEC. (CC.1)
2007 FLOW
COLOR SPEC. (CC.2)
2007 FLOW
COLOR SPEC. (CC.3)
2007 FLOW
COLOR SPEC. (CC.4)
Product Overview
• Combines the incredible wind range and sheeting ability of a BOW kite with the direct steering and bar simplicity of a 4 line kite.
• Excellent for all level of riding from dedicated wave riding to
dedicated freestyle.
• Perfect for hooked in and unhooked riding.
• Radically reduced bar pressure.
Compared to 2006
• Completely re engineered new generation Hybrid/SLE.
• Radically increased wind range and safety
• Increased low wind performance
Dedicated Flow control bar featuring:
• Functional pulley free control bar.
depower and line configuration.
• On the fly stopper ball, for easy bar adjustments
Compared to the DNA
• The flow has a faster turning speed.
• The flow has more a flatter profile for improved upwind ability and
high wind performance
Compared to the Lift
• The Flow has increased wind range due to the Hybrid/SLE design.
• A new generation all round performance kite
Target customer
• Advanced beginner to Pro riders.
• Suitable for wave, freeride and freestyle
Flow
Key Selling points • New generation design
• Large windrange
• Easy handling • Extremely predictable
• Simple to re launch • Aluminium shaft pump on all sizes
• Excellent for all standards of rider
Flow Sizes and Components
Product Code
AK07FL05
AK07FL07
AK07FL10
AK07FL12
AK07FL14
AK07FL16
AK07FLK05
AK07FLK07
AK07FLK10
AK07FLK12
AK07FLK14
AK07FLK16
Model
Std Bar Length
Flow SLE 5 - Complete
Flow SLE 5 - Kite only
45cm
45cm
45cm
55cm
55cm
65cm
45cm
45cm
45cm
55cm
55cm
65cm
65cm
65cm
Flow
Flow 07 FAQ
What type of rider is the Flow aimed at?
We developed the Flow to cover a broad range of riders from entry level Freeride to advance freestyle and wave riding. The
focus was on reliable performance and ease of use. First time riders should consider the DNA while more advanced
freestyle riders might consider one of our C-Kites or the Halo for maximum hang time. Why do you call the Flow a Hybrid/SLE, isn’t the Flow a BOW kite:
Technically the Flow is not a BOW kite, in order for a kite to be a true bow kite, the trailing edge needs to be concave and be
curved enough that it runs over a vertical line drawn from the two rear attachment points, which does not occur in all Flow
sizes. Secondly true bow kites have 2:1 pulley on the bar, which the Flow does not feature. Typically BOW kites should fall
within the original patent which covers these two points so we decided to go with the term SLE or Hybrid.
What is the difference between the Flow (SLE/Hybrid) and the Halo (BOW)
•
The Flow is lighter on the bar and the steering on the flow is more direct with more feel – This is due to the reason that
the wingtips of the flow are less swept back, this allows us to use less struts, moves the center of effort further
forward. Most importantly this allows an increased depower range for the same give bar movement, therefore we
could avoid the 2:1 pulley configuration on the bar.
• The flow offers increased stability over the Halo - As the flow has a slightly deeper foil with the center of effort further
forward. In addition the canopy curve is not as flat as the Halo.
Flow
Halo
Canopy Curve Detail
Planform Details
Wingtip details
Why does the flow have such a long depower?
With the development of bar release safety the traditional role of the depower range of the kite has changed. The lower
part of the depower line (closest to the rider) can be viewed as “useable depower”, while the upper part can be view as “bar
release safety travel”
Why is traditional depower strap replaced by a cleat on the trigger release?
The role of the depower strap has changed, traditionally riders using C-Kites would use the strap for micro adjustments while
kiting. Due to the extended Depower range of the Flow bar system and the increased effectiveness of the depower function,
it is seen more as a one off setting to find the sweet spot of the kite in given wind conditions. In the end this allowed us to
offer a significantly simpler configuration.
Why are there no Pulleys on the bar?
The Flow does not have outside bar pulleys this gives a more direct “C-Kite” feel to the steering and bar feedback. More info
on this is covered in the question “What is the difference between the Flow (SLE/Hybrid) and the Halo (BOW)”
Is the Flow Suitable for unhooked riding?
Yes, Most definitely one of the original parameters of the design was to make the Flow as versatile as possible for all styles
of riding. One great outcome of the new design was the unhooked performance.
Flow
What is the performance differences between the Flow, a C-kite and a 5th line “BOW” kite:
The focus on the Flow is safety, simplicity and all round performance. From our perspective bridles give the highest level of what we
term “Bar Release Safety” as the pivot point on the kite can be higher up the leading edge through the use of bridles. A 5th line bow
kite falls somewhere in between a standard c Kite and a bridled SLE or BOW design (see Below for an explanation on these). We still
offer 5th line C-Kites for the rider who is not as safety focused.
Depower and Bar Release Safety
Reactor/ Lift
(4/5 Line C Kite)
Flow/DNA (SLE)
Halo (BOW)
Could you convert the Flow to a 5th line style kite without the bridles:
Technically you could set the Flow up in the 5th line configuration with a very limited bridle or even no bridle. However during our
design process the kite was optimized to run with bridles. We felt that for the target customer they would be looking at safety and
simplicity, and knowing that the kite was always running in its optimum configuration.
How do you Relaunch the Flows:
Should you have a sufficient amount of wind in the canopy the Flows are best relaunched by NOT swimming towards the kite and
waiting for the kite to roll along their LE and relaunch. In light wind condition you can also launch the flows in a traditional C-Kite
method, by swimming towards the kite and allowing it to move to the side of the window on its back.
2-4 Halo
2007 HALO
COLOR SPEC. (CC.1)
2007 HALO
COLOR SPEC. (CC.2)
2007 HALO
COLOR SPEC. (CC.3)
2007 HALO
COLOR SPEC. (CC.4)
Product Overview
• Dedicated BOW design.
• Focus on enhancing all aspects of the Halo design to make
significant steps forward in all round performance.
Dedicated Halo control bar featuring:
• Option of Bungee system with traditional webbing depower
strap or trigger mounted cleat system
• Optional on the fly moveable stopper ball
New for 2007
• Increased stability especially focused on smaller sizes.
• Increased turning speed in larger sizes.
• New 12m size.
• Completely redesigned control bar for increased focus individual rider preferences.
Compared to the Flow
• Slightly more wind range through increased bottom end.
• Improved hang-time
• Dedicated BOW performance with huge hang time.
Target customer
• Intermediate to advanced freerider
Halo
Key selling points:
• Increased wind range through patented BOW kite design.
• High performance foil and refined plan form.
• Reduced bar pressure through load return system
• Optimized Bridle system with limited pulleys for maximum
reliability.
• Aluminium shaft pump on all sizes
Halo Sizes and Components
Product Code
Model
Std Bar Length
AK07HL07
AK07HL10
AK07HL12
AK07HL14
AK07HLK07
Halo 7 - Complete
Halo 10 - Complete
Halo 12 - Complete
Halo 14 - Complete
Halo 7 - Kite only
45cm
55cm
55cm
65cm
45cm
65cm
AK07HLK10
AK07HLK12
AK07HLK14
Halo 10 - Kite only
Halo 12 - Kite only
Halo 14 - Kite only
55cm
55cm
65cm
65cm
2-5 Lift
TWELV
E
TWELV
E
E
TWELV
E
TWELV
E
TWELV
TWELV
E
C- Kite simplicity with the legendary
Lift Performance
2007 LIFT
COLOR SPEC. (CC.1)
2007 LIFT
COLOR SPEC. (CC.2)
2007 LIFT
COLOR SPEC. (CC.2)
Product Overview
• In its 6th year the Lift remains a benchmark for all round
performance C kites.
• The focus on the 07 Lifts has been to increase the smoothness of the power delivery and deliver consistent performance through all
sizes.
Dedicated C-Kite control bar featuring:
• Options of On the fly stopper ball and trigger mounted cleat system
or traditional strap adjustment system.
• 5th line standard on all control bars, easily removable system to
allow 4 or 5 line options.
Compared to 2006
• Further refinements in construction by increasing seam, trailing
edge and wingtip reinforcement.
• Increased focus on stability in smaller sizes.
Compared to the Flow
• More direct steering through dedicated C-Kite design.
Compared to the Reactor
• The lift offers more stability and general ease of use.
Target customer
Intermediate to advanced C-Kite riders.
Lift
Turning Characteristic
Key Selling points
• Ideal for riding fast and aggressively • Extremely responsive
• Precise handling • Instant power delivery
• 4/5 Line modular control bar to suit all riding styles. • Excellent wind range and de-power capability
Lift Sizes and Components
Product Code
AK07LF06
AK07LF08
AK07LF10
AK07LF12
AK07LF14
AK07LF16
AK07LFK06
AK07LFK08
AK07LFK10
AK07LFK12
AK07LFK14
AK07LFK16
Model
Std Bar Length
Lift 6 - Complete
Lift 8 - Complete
Lift 10 - Complete
Lift 12 - Complete
Lift 14 - Complete
Lift 16 - Complete
Lift 6 - Kite only
Lift 8 - Kite only
Lift 10 - Kite only
Lift 12 - Kite only
Lift 14 - Kite only
Lift 16 - Kite only
45cm
45cm
45cm
55cm
55cm
65cm
45cm
45cm
45cm
55cm
55cm
65cm
65cm
65cm
2-6 Reactor
Remains the fastest, most efficient power source
on the planet.
2007 REACTOR
COLOR SPEC. (CC.1)
2007 REACTOR
COLOR SPEC. (CC.2)
2007 REACTOR
COLOR SPEC. (CC.3)
Product Overview
• Developed with super efficient entry angles and aerodynamic foil
profiles it’s all about forward speed and dynamic efficiency.
• The Reactor is not for everyone, designed to turn on a dime and
reach warp speed blasting through the window.
• Require precision rider input, but it legendary drive builds an
increasingly core group of followers each year.
WARNING - The reactor is extremely sensitive to rider input. For expert
use only.
Dedicated C-Kite control bar featuring:
de power and line configuration.
• Options of On the fly stopper ball and Trigger mounted cleat system
or traditional strap adjustment system.
• 5th line standard on all control bars, easily removable system to
allow 4 or 5 line options.
New for 2007
• Larger sizes are more oriented towards freestyle, power turning and
a lot of forward speed.
• Smaller sizes offer more pivotal turning increasing their appeal to
wave riding and all round performance.
Compared to the Lift
• The reactor has the highest forward speed and turning available.
Buy this kite if you want to:
• Only blame yourself if you can’t nail something.
Target customer
• Advanced wave and freestyle riders.
Reactor
Key Selling points
• Extreme C Kite performance
• Lighting fast turning
• High efficiency foil
• Auto Deflators on ball Valves
• Heavy Duty Bag with external pump and bar pocket
Reactor Sizes and Components
Product Code
Model
Std Bar Length
AK07RE04
AK07RE07
AK07RE09
Reactor 4 - Complete
45cm
45cm
45cm
AK07RE12
AK07RE15
AK07RE18
AK07RE22
AK07REK04
AK07REK07
AK07REK09
AK07REK12
AK07REK15
AK07REK18
AK07REK22
Reactor 4 - Kite only
55cm
55cm
65cm
65cm
45cm
45cm
45cm
55cm
55cm
65cm
65cm
65cm
65cm
3-1
DNA Control Bar
DNA Bar
Accessories supplied with the bar
- Lock n Load ball
- Leash XL
- Wrist connector
- D.N.A. 15m Line connectors
Control Bars DNA- Complete 26m
AZC07DFL45
Control Bar 45 cm DNA - Comp with FL
3-2 Flow Control Bar
Flow Bar
- Lock n Load ball
- Leash XL
- Wrist connector
Control Bars Flow- Complete 26m
AZC07FFL45
Control Bar 45 cm Flow - Comp with FL
AZC07FFL55
AZC07FFL65
3-3 Halo Control Bar
Halo Bar
- Lock n Load ball
- Leash XL
- Wrist connector
- Halo Bungie Loop
Control Bars Halo- Complete 26m
AZC07HFL45
Control Bar 45 cm Halo- Comp with FL
AZC07HFL55
Control Bar 55 cm Halo - Comp with FL
AZC07HFL65
Control Bar 65 cm Halo - Comp with FL
3-4 Lift/Reactor Control Bar
C-Kite Bar
- Lock n Load ball
- Leash 5 Line
- Wrist connector
Control Bars C Kites Complete 26m 4/5 Line
AZC07CFL45
Control Bar 45 cm C Kite 4/5 Line - Comp with FL
AZC07CFL55
AZC07CFL65
Control Bars C Snowkites - Complete 26m 4/5 Line
AZC07SFL45
Control Bar 45 cm Snowkite - Comp with FL
AZC07SFL55
Control Bar 55 cm Snowkite - Comp with FL
4-1 Board Technology
Board Component Tech
Autofit technology
Viewing the straps and pads as a single unit, we
developed a system that can flex and form to fit
each individual rider. By using a combination of
densities in the footpad (higher densities in the high
load area, and lower density in the other areas) we
found we could increase instep support radically as
well as overall load distribution into the base of the
foot. At the same time the unique flex forming of the
edges and center of the footstrap works in
conjunction with the dual density inner layer,
allowing the strap to mold to each individual riders
foot shapen.
Fins
Developed to enhance the specific
performance requirements of each board, each fin features specific
design characteristics based on target rider requirements.
Wake Fin
The raked back trailing edge allows the fin to be easily broken out
when turning while the longer chord length offers more lateral
resistance, for a given depth at lower board speeds.
Metro Fin
Developed to suit more advanced riders the Metro features a shorter
chord length for less drag at higher speeds. The trailing edge features
a small cutaway for increased grip with a more vertical overall angle
for a more locked in ride.
Code Fin
Developed for our new school Hammer series, the Code features a
raked back trailing edge with a cutaway for a locked in ride with
maximum grip. The short chord limits the drag from the fin, while the
swept back design optimizes turning. Subject to change without notice
4-2 Fins
Product Code
AZF07WA30
AZF07WA40
AZF07WA50
Name
Fins
Fin Wake 3.0 (Piece)
AZF07ME40
AZF07ME50
Fin Metro 4.0 (Piece)
Fin Metro 5.0 (Piece)
AZF07CD60
Fin Code 6.0 (Piece)
AZF07T320
Fin T-3 (Piece)
Description
4-3 Traction
Product Code
AZBC07DPTT
Name
Traction
Twintip deck Pad set (Pair)
AZBC07DPSQ
Square deck Pad set (Pair)
AZBC07DPCR
AZBC07DPCG
Converse deck Pad set- Red
Converse deck Pad set- Green
Description
4-4 Boardbags
Product Code
AZBB07TXS
AZBB07TS
AZBB07TM
AZBB07TLW
AZBB07TXL
Name
Boardbags
Kiteboard Bag XS
Kiteboard Bag S
Kiteboard Bag M
Kiteboard Bag L Widebody
Kiteboard Bag XL
Description
125 x 38
135 x 41
144 x 44
137 x 48
148 x 52
AZBB07D63
Kiteboard Bag Directional
190 x 48
AZBB07TRS
AZBB07TRM
AZBB07TRWL
Kitebag Traveler S
Kitebag Traveler M
Kitebag Traveler L Widebody
135 x 41
144 x 44
137 x 48
Kiteboard Bag XS
Kiteboard Bag S
Kiteboard Bag M
Kiteboard Bag L Widebody
Kiteboard bag XL
Kiteboard Bag Directional
Boardbag Fitting Guide
Protoy 122 & X-Pact 125, Airforce 110
Proty 129 & 135, X-Pact 132, Switch 130
Switch 144 & 138, X-Pact 139, Hammer 138 & 14
Exile
SQ1 & 2
Converse 6’0” & 6’2”
Kitebag Traveler S
Kitebag Traveler M
Kitebag Traveler L Widebody
Protoy 123 - 135, Xpact 125-132, Switch 130, Airforce
Switch 144 & 138, X-Pact 139, Hammer 138 & 144
Exile 135 and smaller.
4-5 Footstraps General Board Components
Product Code
AZBC07FSTT
Name
Footstraps and General Board
Components
Airush Twin Tip Footstraps (Pair)
AZBC07FSD
Airush Directional Footstrap
AZBC07LR
Leash Ring
AZBC07GHE
EVA Grab Handle
AZBC07GHT
Grab Handle Tube
Description
5-1 Kite Accesories and Components
Product Code
AZKP07L
AZKP07M
Name
Kite Accesories and Components
Kite Pump Alu Shaft - Large
Kite Pump Alu Shaft - Medium
AZKP07PG
Pump Gauge
AZKP07GC
Pump Gauge Connector
AZKS07L
Kite Sleeve -L
AZKS07S
Kite Sleeve -S
AZKWB07L
Kite Weight Bag
Description
Kite Accesories and Components
Product Code
Name
AZKB07L
AZKB07M
AZKB07S
Standard Kitebag S
Standard Kitebag M
Standard Kitebag L
AZRK07BR
Bladder Repair Kit
AZRK07RT
Repair Tape - Semi Transparent
Description
5-2 Bladders
Product Code
Name
Bladder Sets
AZX07D12ST
AZX07D12T1
AZX07D12T2
AZX07D12T3
AZX07D1200
DNA Bladder sets
DNA 12 Bladder Set
DNA 12 Bladder Set T1 LE
DNA 12 Bladder Set T2
DNA 12 Bladder Set T3
DNA 12 strut Set
AZX07D09ST
AZX07D09T1
AZX07D09T2
AZX07D09T3
AZX07D0900
DNA 9 Bladder Set
DNA 9 Bladder T1 LE
DNA 9 Bladder T2
DNA 9 Bladder T3
DNA 9 strut Set
AZX07D04ST
AZX07D04T1
AZX07D04T2
AZX07D04T3
AZX07D0400
DNA 4 Bladder Set
DNA 4 Bladder T1 LE
DNA 4 Bladder T2
DNA 4 Bladder T3
DNA 4 strut Set
AZX07M16ST
AZX07M16T1
AZX07M16T2
AZX07M16T3
AZX07M16T4
AZX07M1600
Flow Bladder sets
Flow 16 Bladder Set
Flow 16 Bladder Set T1 LE
Flow 16 Bladder Set T2
Flow 16 strut Set
AZX07M14ST
AZX07M14T1
AZX07M14T2
AZX07M14T3
AZX07M14T4
AZX07M1400
Flow 14 Bladder Set
Flow 14 strut Set
AZX07M12ST
AZX07M12T1
AZX07M12T2
AZX07M12T3
AZX07M12T4
Flow 12 Bladder Set
Description
Bladders
Product Code
AZX07M1200
Name
Flow 12 strut Set
AZX07M10ST
AZX07M10T1
AZX07M10T2
AZX07M10T3
AZX07M10T3
AZX07M1000
Flow 10 Bladder Set
Flow 10 strut Set
AZX07M07ST
AZX07M07T1
AZX07M07T2
AZX07M07T3
AZX07M07T4
AZX07M0700
Flow 7 Bladder Set
Flow 7 strut Set
AZX07M05ST
AZX07M05T1
AZX07M05T2
AZX07M05T3
AZX07M05T4
AZX07M0500
Flow 5 Bladder Set
Flow 5 strut Set
AZX07L16ST
AZX07L16T1
AZX07L16T2
AZX07L16T3
AZX07L16T4
AZX07L1600
Lift Bladder sets
Lift 16 Bladder Set
Lift 16 Bladder Set T1 LE
Lift 16 Bladder Set T2
Lift 16 strut Set
AZX07L14ST
AZX07L14T1
AZX07L14T2
AZX07L14T3
AZX07L14T4
AZX07L1400
Lift 14 Bladder Set
Lift 14 strut Set
AZX07L12ST
AZX07L12T1
AZX07L12T2
Lift 12 Bladder Set
Description
Bladders
Product Code
AZX07L12T3
AZX07L12T4
AZX07L1200
Name
Lift 12 strut Set
AZX07L10ST
AZX07L10T1
AZX07L10T2
AZX07L10T3
AZX07L10T4
AZX07L1000
Lift 10 Bladder Set
Lift 10 strut Set
AZX07L08ST
AZX07L08T1
AZX07L08T2
AZX07L08T3
AZX07L08T4
AZX07L800
Lift 8 Bladder Set
Lift 8 strut Set
AZX07L06ST
AZX07L06T1
AZX07L06T2
AZX07L06T3
AZX07L06T4
AZX07L0600
Lift 6 Bladder Set
Lift 6 strut set
AZX07R22ST
AZX07R22T1
AZX07R22T2
AZX07R22T3
AZX07R22T4
AZX07R2200
Reactor Bladders
Reactor 22 Bladder Set
Reactor 22 Bladder T1 LE
Reactor 22 Bladder T2
Reactor 22 strut set
AZX07R18ST
AZX07R18T1
AZX07R18T2
AZX07R18T3
AZX07R18T4
AZX07R1800
AZX07R15ST
Description
Bladders
Product Code
AZX07R15T1
AZX07R15T2
AZX07R15T3
AZX07R15T4
AZX07R1500
Name
AZX07R12ST
AZX07R12T1
AZX07R12T2
AZX07R12T3
AZX07R12T4
AZX07R1200
AZX07R9ST
AZX07R9T1
AZX07R9T2
AZX07R9T3
AZX07R9T4
AZX07R900
Reactor 9 strut set
AZX07R07ST
AZX07R07T1
AZX07R07T2
AZX07R07T3
AZX07R07T4
AZX07R0700
Reactor 7 strut Set
AZX07R04ST
AZX07R04T1
AZX07R04T2
AZX07R04T3
AZX07R04T4
AZX07R0400
Reactor 4 strut Set
AZX07H14ST
AZX07H14T1
AZX07H14T2
AZX07H14T3
Halo Bladders
Halo 14 Bladder Set
Halo 14 Bladder T1 LE
Halo 14 Bladder T2
Halo 14 Bladder T3
Description
Bladders
Product Code
AZX07H14T4
AZX07H14T5
AZX07H1400
Name
Halo 14 Bladder T4
Halo 14 Bladder T5
Halo 14 strut set
AZX07H12ST
AZX07H12T1
AZX07H12T2
AZX07H12T3
AZX07H12T4
AZX07H12T5
AZX07H1200
Halo 12 Bladder Set
Halo 12 Bladder T2
Halo 12 Bladder T3
Halo 12 Bladder T4
Halo 12 Bladder T5
Halo 12 strut Set
AZX07H10ST
AZX07H10T1
AZX07H10T2
AZX07H10T3
AZX07H10T4
AZX07H10T5
AZX07H1000
Halo 10 Bladder Set
Halo 10 Bladder T2
Halo 10 Bladder T3
Halo 10 Bladder T4
Halo 10 Bladder T5
Halo 10 strut set
AZX07H07ST
AZX07H07T1
AZX07H07T2
AZX07H07T3
AZX07H07T4
AZX07H07T5
AZX07H0700
Halo 7 Bladder Set
Halo 7 Bladder T2
Halo 7 Bladder T3
Halo 7 Bladder T4
Halo 7 Bladder T5
Halo 7 strut Set
Description
6-1 Control Bar Components and Accessories
Product Code
AZC07B45
AZC07B55
AZC07B65
AZBSB0745
AZBSB0755
AZBSB0765
AZLL07BFH
AZLL07BFS
Name
Description
Control Bar Components
and Accessories
Control Bar 45 cm. Standard
- bar and bar end only
Bar Set Bag 45
Bar Set Bag 55
Bar Set Bag 65
Bar Components
Bar floats Halo (For outside
leader lines)
Bar floats Std (For outside
leader lines)
AZLP07PTBF
Kite pigtails back & front set
AZLE07TR
Leash 3M. Trainer Kite
(Replacement)
Control Bar Components and Accessories
Product Code
AZLE074L
Name
Leash 4 Line
AZLE075L
Leash 5 Line (incl webbing
loop attachment)
AZLE07XL
Leash XL (Freeride “Cleat”
Bar)
AZLE07WC
Wrist Connector
AZCBC07PR
Pulley (Ronstan Pulley RF
20102)
Description
Control Bar Components and Accessories
Product Code
AZCBC07BE
Name
Bar End
AZLL07UHA
Leader Lines Spectra Outside
Halo
AZLL07UST
Leader line Spectra outside
Std
AZLL07NLS
Leader Line front with Leash
stopper
AZLL07NST
Leader line front standard
Description
6-2 Trigger Release Components
Product Code
AZDL07TC
Name
Trigger Release Components
Trigger release Comp (Mech &
Harness Line)
AZDL07TH
Trigger release housing
AZDL07LC
Trigger Release Lever Cap
(Red)
AZDL07TM
Trigger release mechanism
set (Including spring)
AZDL07TS
Trigger Release Spring - Pack
of 10.
Description
Trigger Release Components
Product Code
AZDL07TLTX
Name
Trigger Release Locking Tube
XS ( 24cm DL)
AZDL07TLTS
S ( 33cm DL)
Large ( 39cm DL)
AZDL07TLTL
AZDL07TL24
AZDL07TL33
AZDL07TL39
Description
Trigger Release Depower
Loop XS (24cm)
Loop small (33cm)
Loop large (39cm)
6-3 Depower Components
Product Code
AZDL07TDLS
Name
Spectra depower Line C-Kite
AZDL07TDLH
Spectra depower Line Halo
AZDL07TDLL
Spectra depower line long
(Freeride cleat bars)
AZDL07HBL
Halo Bungee Loop
AZDS074L
Depower Strap C-kite
AZDS07HA
Depower Strap Halo
AZDS07CS
Center Line Swivel with
D-Shackle
Description
Depower Components
Product Code
AZDL07DC
Name
Depower cleat Ronstan
(RF5101)
AZCBC07SS
Sliding Stopper
Description
6-4 General Plastic Parts
Product Code
AZLE07SW
AZCBC07KB
Name
General Plastic Parts
Leash Swivel Retrofit complete
Description
Knotless Ball (Stopper) - Pack
of 10
6-5 Flying Lines
Product Code
AZL07TR2X2
AZL07TR3X2
Name
Flying Lines
Lines Sets And Line Components
Trainer Kite Line Set of 200LB x 20
M. spectra
Trainer Kite Line Set of 200LB x 20
M. spectra
AZL07DNAX4
Lines Sets - 2 Line Replacement Sets
Flying Lines DNA 25M (15/10) Set of 4
AZL0710X4
AZL0715X4
AZL0720X4
AZL0725X4
AZL0730X4
Flying Lines 10 M. (Color) Sets of 4
Description
Flying Lines
Product Code
AZL07B10X2
AZL07B15X2
AZL07B20X2
AZL07B25X2
AZL07B30X2
Name
Description
Lines Sets - 2 Line Replacement Sets
Flying Lines 10 M. Back Lines (col grey) Sets of 2
AZL07R10X2
AZL07R15X2
AZL07R20X2
AZL07R25X2
AZL07R30X2
Flying Lines 10 M. Front Lines (col red) Sets of 2
AZL075LC
5th line Complete
AZL075LKL
5th line kite leader line
7-1 Waist Harness, Seat Harness, Impact Vest
Product Code
AZMV07L
AZMV07M
AZMV07S
Name
Waist Harness, Seat Harness,
Impact Vest
Impact Vest L
Impact Vest M
Impact Vest S
AZH07WL
AZH07WM
AZH07WS
Waist Harness L
Waist Harness M
Waist Harness S
AZH07SL
AZH07SM
AZH07SS
Seat Harness L
Seat Harness M
Seat Harness S
Description
7-2 Water Apparel
Product Code
AZP07VSXS
AZP07VSS
AZP07VSM
AZP07VSL
AZP07VSXL
Name
Water Apparel
Airush Lycra Short Sleeves - XS
Airush Lycra Short Sleeves - S
Airush Lycra Short Sleeves - M
Airush Lycra Short Sleeves - L
Airush Lycra Short Sleeves - XL
AZP07VLXS
AZP07VLS
AZP07VLM
AZP07VLL
AZP07VLXL
Airush Full Lycra Long Sleeves - XS
Airush Full Lycra Long Sleeves - S
Airush Full Lycra Long Sleeves - M
Airush Full Lycra Long Sleeves - L
Airush Full Lycra Long Sleeves - XL
AZP07NTS
AZP07NTM
AZP07NTL
AZP07NTXL
Airush Neo Titanium Skin Long Sleeve - S
Airush Neo Titanium Skin Long Sleeve - M
Airush Neo Titanium Skin Long Sleeve - L
Airush Neo Titanium Skin Long Sleeve - XL
AZP07TQS
AZP07TQM
AZP07TQL
AZP07TQXL
Description
Airush Quick Dry - S
Airush Quick Dry - M
Airush Quick Dry - L
Airush Quick Dry - XL
7-3 Promotional Apparel
Product Code
AZP07TMM
AZP07TML
AZP07TMXL
Name
Promotional Apparel
T-shirt “Mermaid” - M
T-shirt “Mermaid” - L
T-shirt “Mermaid” - XL
AZP07TTM
AZP07TTL
AZP07TTXL
T-shirt “T3” - M
T-shirt “T3” - L
T-shirt “T3” - XL
AZP07TIM
AZP07TIL
AZP07TIXL
T-shirt “Construction” - M
T-shirt “Construction” - L
T-shirt “Construction” - XL
AZP07BP
Back Pack
AZP07CA
Cap
Description
7-4 Promotional Flags and Banners
Product Code
AZP07FC
AZP07FL
Name
Description
Airush Beach Flag Complete (incl Pole)
180 x 455 cm
Airush Beach Flag (without pole )
180 x 455 cm
Li>VÊv>}
-V>iÊ£Ê\Ê£ä
{ÊV
{xxÊV
nÊV
"",-\
* /" Ê{nxÊ,
AZP07FP
AZP07FS
"",-\
* /" Ê{nxÊ,
"",-\
näÊV
* /" Ê{nxÊ,
* /" Ê
* /" Ê
* /" Ê
* /" Ê7/
* /" Ê{ÓnÊ,9
* /" Ê7/
Airush Flag Pole
150 x 190 cm
Airush Flag
150 x 190 cm
AZP07WS
Airush Windsock
68 x 140 cm
AZP07FB
Airush Banner
75 x 300 cm
7-5 Stickers & Point of Sale
Product Code
AZP07STPS
AZP07STPL
Name
Description
Airush Sticker Combo Set - S (pack of 25)
Airush Sticker Combo Set - L (pack of 10)
7” x 8.5”
AZP07STAD
Airush Authorized Dealer Sticker
(pack of 2) 19.5 x 16 cm
AZP07STTB
Airush Tattoo Black (pack of 10)
2.5” x 2.5”
Airush Tattoo Red (pack of 10)
2.5” x 2.5”
AZP07STTR
AZP07PDG
Dealer Guide
AZP07PTD
Airush Kite Display
Stickers & Point of Sale
Product Code
AZP07PPA
Name
Airush Poster A: Converse
17 x 23.5
AZP07PPB Airush Poster B: Freestyle
17 x 23.5
AZP07PCD
Photo CD
AZP07PME
AZP07PMF
English Manual Kite French Manual Kite
AZP07PCA
2007 Airush Catalog
Description
7-6 Advertisements
Single Page Advertisement
Converse
DNA
Flow SLE
Halo
Advertisements
Switch
Lift
X-Pact
Advertisements
Double Page Advertisement
Protoy & Flow SLE
X-Pact & Lift

Untitled

Transcription

Similar documents

Ranger, Ranger LTD, and Tech 10 BCD Custom Color

Shaping Science for a Healthier World: Sex and Gender Matter

Rush v pro school – Hydra

Reconstructive surgery for OAB

Tips for using the Alioscopy Trigger for Adobe Photoshop Extended

READY TO FLY!!!

deuter Streamer 2.0 Liter

How to make an origami bird

Malakoplakia of the bladder associated with advanced obstructive