DAV-C770 - Free Service Manuals
Transcription
DAV-C770 - Free Service Manuals
www.freeservicemanuals.info 11/15/15 DAV-C770/C990 SERVICE MANUAL US Model Canadian Model Ver 1.0 2002.07 DAV-C770/C990 AEP Model Australian Model DAV-C770 • DAV-C770/C990 are composed of following models. As service manuals are issued for each component model, please refer to them. COMPONENT MODEL NAME DAV-C770 DAV-C990 SACD/DVD RECEIVER HCD-C770 HCD-C990 FRONT SPEAKER SS-TS503 SS-TS551 CENTER SPEAKER SS-TS503 SS-CT551 REAR SPEAKER SS-TS503 SS-TS551 SUB WOOFER SS-WS503 SS-WS551 PACKAGE SPEAKER SS-WT503 SS-C990 SPECIFICATIONS PARTS LIST General Part No. Description 1-477-372-11 1-754-060-13 1-754-147-11 1-754-149-11 1-769-108-11 COMMANDER, STANDARD (RM-SS990) ANTENNA (FM) (C770: AEP, Australian) ANTENNA (FM) (C770: US, Canadian/C990) LOOP ANT (AM) CORD, CONNECTION (VIDEO CORD) Power requirements North American model: European model: Australian model: Power consumption Dimensions (approx.) Mass (approx.) Operating temperature Operating humidity Supplied accessories 120 V AC, 60 Hz 230 V AC, 50/60 Hz 220 – 240 V AC, 50/60 Hz 135 W (120 V AC) 135 W (230 V AC) (DAV-C770) 140 W (120 V AC) (DAV-C990) 1 W (120 V AC) 2 W (230 V AC) (at the Power Saving Mode) 355 × 70 × 335 mm (14 × 2 7/8 × 13 1/4 inches: DAV-C770) (14 × 2 7/8 × 15 inches: DAV-C990) (w/h/d) incl. projecting parts 4.4 kg (9 lb 12 oz) 5˚C to 35˚C (41˚F to 95˚F) 5 % to 90 % • Speakers (5) • Subwoofer (1) • AM loop antenna (1) • FM wire antenna (1) • Speaker cords (5m × 4, 15m × 2) (17ft. × 4, 50ft. × 2) • Video cord (1) • Remote Commander (remote) RM-SS990 (1) • R6 (size AA) batteries (2) • Foot pads (20) • Speakers-connection and Installation (card) (1) • 21-pin Adapter (1) (Only for the European models) Design and specifications are subject to change without notice. Remark 1-824-622-11 CORD (WITH CONNECTOR) (RED) (for FRONT R SPEAKER) 1-824-622-21 CORD (WITH CONNECTOR) (PURPLE) (for SUB WOOFER) 1-824-622-31 CORD (WITH CONNECTOR) (WHITE) (for FRONT L SPEAKER) 1-824-622-41 CORD (WITH CONNECTOR) (GRAY) (for REAR R SPEAKER) 1-824-622-51 CORD (WITH CONNECTOR) (BLUE) (for REAR L SPEAKER) 1-824-622-61 CORD (WITH CONNECTOR) (GREEN) (for CENTER SPEAKER) 1-824-180-11 4-241-068-11 4-241-068-21 4-241-068-31 CORD, CONNECTION (21PIN ADAPTER) (AEP) MANUAL, INSTRUCTION (ENGLISH) (C770) MANUAL, INSTRUCTION (FRENCH) (C770: Canadian, AEP) MANUAL, INSTRUCTION (GERMAN, SPANISH, DUTCH, SWEDISH, ITALIAN, POLISH) (C770: AEP) 4-241-068-41 MANUAL, INSTRUCTION (DANISH, FINNISH, PORTUGUESE) (C770: AEP) 4-241-068-51 4-241-071-11 4-241-071-21 4-243-416-01 4-243-457-01 MANUAL, INSTRUCTION (GREEK) (C770: AEP) MANUAL, INSTRUCTION (ENGLISH) (C990) MANUAL, INSTRUCTION (FRENCH) (C990: Canadian) BATTERY COVER (for RM-SS990) RUBBER (SPEAKER) (for SPEAKER) COMPACT AV SYSTEM 9-874-058-01 Sony Corporation 2002G0500-1 C 2002.07 Home Audio Company Published by Sony Engineering Corporation. Published in Heiloo, Holland. www.freeservicemanuals.info 11/15/15 DAV-C770/C990 REVISION HISTORY Clicking the version allows you to jump to the revised page. Also, clicking the version at the upper right on the revised page allows you to jump to the next revised page. Ver. 1.0 2 Date 2002.07 Description of Revision New Published in Heiloo, Holland. HCD-C770/C990 SERVICE MANUAL US Model Canadian Model Ver 1.5 2003.07 HCD-C770/C990 AEP Model Australian Model HCD-C770 HCD-C770/C990 is the amplifier, DVD/CD player and tuner section in DAV-C770/C990. Photo: HCD-C770 Model Name Using Similar Mechanism NEW Mechanism Type CDM69-DVBU16 Base Unit Name DVBU16 Optical Traverse Unit Name DBU-1 SPECIFICATIONS AUDIO POWER SPECIFICATIONS (C770: US model) POWER OUTPUT AND TOTAL HARMONIC DISTORTION: With 3 ohm loads, both channels driven, from 150 – 10,000 Hz; rated 70 watts per channel minimum RMS power, with no more than 1 % total harmonic distortion from 250 milliwatts to rated output. AUDIO POWER SPECIFICATIONS (C990: US model) POWER OUTPUT AND TOTAL HARMONIC DISTORTION: With 3 ohm loads, both channels driven, from 150 – 10,000 Hz; rated 75 watts per channel minimum RMS power, with no more than 1 % total harmonic distortion from 250 milliwatts to rated output. Amplifier section Stereo mode (C770) Stereo mode (C990) Surround mode (C770) 90 W + 90 W (3 ohms at 1 kHz, THD 10 %) 100 W + 100 W (3 ohms at 1 kHz, THD 10 %) Front: 90 W + 90 W Center*: 90 W Rear*: 90 W + 90 W (3 ohms at 1 kHz, THD 10 %) Subwoofer*: 100 W (3 ohms at 100 Hz, THD 10 %) Surround mode (C990) Front: 100 W + 100 W Center*: 100 W Rear*: 100 W + 100 W (3 ohms at 1 kHz, THD 10 %) Subwoofer*: 100 W (3 ohms at 100 Hz, THD 10 %) * Depending on the sound field settings and the source, there may be no sound output. Inputs (Analog) Inputs (Digital) Outputs (Analog) VIDEO 1, 2: Sensitivity: 150 mV Impedance: 50 kilohms VIDEO 2 (optical): Sensitivity: – VIDEO 1 (AUDIO OUT): Voltage: 2 V Impedance: 1 kilohms PHONES: Accepts low- and high-impedance headphones – Continued on next page – SACD/DVD RECEIVER 9-874-059-06 Sony Corporation 2003G05-1 C 2003.07 Home Audio Company Published by Sony Engineering Corporation HCD-C770/C990 SELF DIAGNOSIS FUNCTION Super Audio CD/DVD system Laser Semiconductor laser (Super Audio CD/DVD: λ = 650 nm) (CD: λ = 780 nm) Emission duration: continuous Signal format system NTSC or NTSC/PAL Frequency response (at 2 CH STEREO mode) DVD (PCM): 2 Hz to 22 kHz (±1.0 dB) CD: 2 Hz to 20 kHz (±1.0 dB) Signal-to-noise ratio More than 80 dB (VIDEO 1 (AUDIO) connectors only) Harmonic distortion Less than 0.03 % FM tuner section System Tuning range North American model: Other models: Antenna Antenna terminals Intermediate frequency PLL quartz-locked digital synthesizer system 87.5 – 108.0 MHz (100 kHz step) 87.5 – 108.0 MHz (50 kHz step) FM wire antenna 75 ohms, unbalanced 10.7 MHz Self-diagnosis Function (When letters/numbers appear in the display) When the self-diagnosis function is activated to prevent the system from malfunctioning. In this case a five-character service number (e.g., C 13 00) with a combination of a letter and digits appears on the screen and the front panel display. Refer to the following table. AM tuner section System Tuning range North American model: European model: Other models: Antenna Intermediate frequency 530 – 1,710 kHz (with the interval set at 10 kHz) 531 – 1,710 kHz (with the interval set at 9 kHz) 531 – 1,602 kHz (with the interval set at 9 kHz) 531 – 1,602 kHz (with the interval set at 9 kHz) 530 – 1,710 kHz (with the interval set at 10 kHz) Loop antenna 450 kHz Video section Inputs Outputs C:13:00 PLL quartz-locked digital synthesizer system Video: 1 Vp-p 75 ohms Video: 1 Vp-p 75 ohms S video: Y: 1 Vp-p 75 ohms C: 0.286 Vp-p 75 ohms COMPONENT: Y: 1 Vp-p 75 ohms PB/CB, PR/CR: 0.7 Vp-p 75 ohms First three characters of the service number C 13 C 31 General Power requirements North American model: European model: Australian model: Power consumption (C770) Power consumption (C990) Dimensions (approx.) Mass (approx.) Operating temperature Operating humidity 120 V AC, 60 Hz 230 V AC, 50/60 Hz 220 – 240 V AC, 50/60 Hz 135 W (120 V AC) 135 W (230 V AC) 1 W (120 V AC) 2 W (230 V AC) (at the Power Saving Mode) 140 W (120 V AC) 1 W (120 V AC) (at the Power Saving Mode) 355 × 70 × 335 mm (14 × 2 7/8 × 13 1/4 inches) (w/h/d) incl. projecting parts 4.4 kg (9 lb 12 oz) 5˚C to 35˚C (41˚F to 95˚F) 5 % to 90 % E XX (xx is a number) Cause and/or Corrective Action The disc is dirty. , Clean the disc with a soft cloth. The disc is not inserted correctly. , Re-insert the disc correctly. To prevent a malfunction, the system has performed the selfdiagnosis function. , Contact your nearest Sony dealer or local authorized Sony service facility and give the 5-character service number. Example: E 61 10 Design and specifications are subject to change without notice. Note: Refer to the “5. TEST MODE” (page 22) for another self-diagnosis function. 2 HCD-C770/C990 Notes on chip component replacement • Never reuse a disconnected chip component. • Notice that the minus side of a tantalum capacitor may be damaged by heat. Flexible Circuit Board Repairing • Keep the temperature of the soldering iron around 270 ˚C during repairing. • Do not touch the soldering iron on the same conductor of the circuit board (within 3 times). • Be careful not to apply force on the conductor when soldering or unsoldering. CAUTION Use of controls or adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure. SAFETY CHECK-OUT After correcting the original service problem, perform the following safety check before releasing the set to the customer: Check the antenna terminals, metal trim, “metallized” knobs, screws, and all other exposed metal parts for AC leakage. Check leakage as described below. LEAKAGE TEST The AC leakage from any exposed metal part to earth ground and from all exposed metal parts to any exposed metal part having a return to chassis, must not exceed 0.5 mA (500 microamperes.). Leakage current can be measured by any one of three methods. 1. A commercial leakage tester, such as the Simpson 229 or RCA WT-540A. Follow the manufacturers’ instructions to use these instruments. 2. A battery-operated AC milliammeter. The Data Precision 245 digital multimeter is suitable for this job. 3. Measuring the voltage drop across a resistor by means of a VOM or battery-operated AC voltmeter. The “limit” indication is 0.75 V, so analog meters must have an accurate low-voltage scale. The Simpson 250 and Sanwa SH-63Trd are examples of a passive VOM that is suitable. Nearly all battery operated digital multimeters that have a 2 V AC range are suitable. (See Fig. A) To Exposed Metal Parts on Set This appliance is classified as a CLASS 1 LASER product. The label is located on the bottom exterior. 0.15 µF 1.5 kΩ AC voltmeter (0.75 V) Earth Ground This label is located on the bottom exterior. Fig. A. Using an AC voltmeter to check AC leakage. SAFETY-RELATED COMPONENT WARNING!! ATTENTION AU COMPOSANT AYANT RAPPORT À LA SÉCURITÉ! COMPONENTS IDENTIFIED BY MARK 0 OR DOTTED LINE WITH MARK 0 ON THE SCHEMATIC DIAGRAMS AND IN THE PARTS LIST ARE CRITICAL TO SAFE OPERATION. REPLACE THESE COMPONENTS WITH SONY PARTS WHOSE PART NUMBERS APPEAR AS SHOWN IN THIS MANUAL OR IN SUPPLEMENTS PUBLISHED BY SONY. LES COMPOSANTS IDENTIFIÉS PAR UNE MARQUE 0 SUR LES DIAGRAMMES SCHÉMATIQUES ET LA LISTE DES PIÈCES SONT CRITIQUES POUR LA SÉCURITÉ DE FONCTIONNEMENT. NE REMPLACER CES COMPOSANTS QUE PAR DES PIÈCES SONY DONT LES NUMÉROS SONT DONNÉS DANS CE MANUEL OU DANS LES SUPPLÉMENTS PUBLIÉS PAR SONY. 3 HCD-C770/C990 Ver 1.5 TABLE OF CONTENTS SELF DIAGNOSIS FUNCTION .................................... 2 1. SERVICING NOTES ............................................... 5 2. GENERAL Location of Controls ...................................................... 3. DISASSEMBLY 3-1. 3-2. 3-3. 3-4. 3-5. 3-6. 3-7. 3-8. 3-9. 3-10. 3-11. 3-12. 3-13. 3-14. 3-15. 3-16. 3-17. 3-18. 3-19. Disassembly Flow .......................................................... Front Panel (AL) Section, Side Panel (L)/(R) ............... Mechanism Deck (CDM69-DVBU16) .......................... POWER SW Board ........................................................ AUDIO Board, VIDEO Board ....................................... AMP Board .................................................................... POWER Board ............................................................... DVD Board ..................................................................... Optical Pick-up (DVBU16) ........................................... Pick-up Unit (TDP022W) .............................................. SW Board, Bracket (Top) assy ...................................... RELAY Board ................................................................ Motor (Stocker) Assy (Stocker) (M781) ....................... Motor (Stocker) Assy (Roller) (M771) ......................... Motor (Stocker) Assy (Mode) (M761) .......................... Rubber Roller (Slider) Assy .......................................... Timing Belt (Front/Rear) ............................................... Cam (Gear) ..................................................................... SENSOR Board .............................................................. 4. ASSEMBLY 4-1. 4-2. 4-3. 4-4. 4-5. How to Install the Cam (Eject Lock) ............................. How to Install the Cam (Gear) ....................................... How to Install the Gear (Mode 2) .................................. How to Install the Gear (Mode Cam) ............................ How to Install the Rotary Encoder (S702), Gear (Stocker Communication) ..................................... 4-6. How to Install the Cam (Stocker U/D) .......................... 4-7. How to Install the Stocker Assy ..................................... 4-8. Phase Adjustment Between Pinions (Slider) And Slider-1 to 5 (L/R) .................................................. 6 9 10 10 11 11 12 12 13 13 14 14 15 15 16 16 17 17 18 18 19 19 20 20 21 21 22 23 5. TEST MODE ............................................................. 24 6. ELECTRICAL ADJUSTMENT ........................... 31 7. DIAGRAMS 7-1. 7-2. 7-3. 7-4. 7-5. Block Diagram – RF SERVO Section – ....................... Block Diagram – AUDIO (DSP) Section – .................. Block Diagram – AUDIO OUT, PANEL Section – ..... Block Diagram – VIDEO Section – ............................. Block Diagram – CHANGER, POWER SUPPLY Section – ................. Note for Printed Wiring Boards and Schematic Diagrams ...................................................... Printed Wiring Boards – RF Section – ......................... Schematic Diagram – RF Section – .............................. Printed Wiring Boards – CHANGER Section – ........... Schematic Diagram – CHANGER Section – ............... Printed Wiring Board – DVD Board (Component Side) – ............................... Printed Wiring Board – DVD Board (Conductor Side) – ................................. Schematic Diagram – DVD Board (1/10) – ................. Schematic Diagram – DVD Board (2/10) – ................. Schematic Diagram – DVD Board (3/10) – ................. 7-6. 7-7. 7-8. 7-9. 7-10. 7-11. 7-12. 7-13. 7-14. 7-15. 4 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 7-16. 7-17. 7-18. 7-19. 7-20. 7-21. 7-22. 7-23. 7-24. 7-25. 7-26. 7-27. 7-28. 7-29. 7-30. 7-31. 7-33. 7-34. 7-35. 7-36. 7-37. 7-38. 7-39. 7-40. Schematic Diagram – DVD Board (4/10) – ................. Schematic Diagram – DVD Board (5/10) – ................. Schematic Diagram – DVD Board (6/10) – ................. Schematic Diagram – DVD Board (7/10) – ................. Schematic Diagram – DVD Board (8/10) – ................. Schematic Diagram – DVD Board (9/10) – ................. Schematic Diagram – DVD Board (10/10) – ............... Printed Wiring Board – AMP Section (1/2) – .............. Printed Wiring Boards – AMP Section (2/2) – ............. Schematic Diagram – AMP Section (1/2) – ................. Schematic Diagram – AMP Section (2/2) – ................. Printed Wiring Boards – AUDIO Section – ................. Schematic Diagram – AUDIO Section – ...................... Printed Wiring Board – VIDEO Section – ................... Schematic Diagram – VIDEO Section – ...................... Printed Wiring Boards – DC-DC CONVERTER Section – ............................... Schematic Diagram – DC-DC CONVERTER Section – ............................... Printed Wiring Boards – CONTROL Section – ........... Schematic Diagram – CONTROL Section – ................ Printed Wiring Board – FL Board – ............................. Schematic Diagram – FL Board – ................................ Printed Wiring Boards – POWER Section (1/2) – ....... Printed Wiring Boards – POWER Section (2/2) – ....... Schematic Diagram – POWER Section – .................... IC Pin Function Description .......................................... 8. EXPLODED VIEWS 8-1. 8-2. 8-3. 8-4. 8-5. 8-6. 8-7. 8-8. 8-9. 8-10. 8-11. 8-12. 8-13. General Section ............................................................. Front Panel Section-1 .................................................... Front Panel Section-2 .................................................... Chassis Section-1 .......................................................... Chassis Section-2 .......................................................... Chassis Section-3 .......................................................... Mechanism Deck Section-1 (CDM69-DVBU16) ........ Mechanism Deck Section-2 (CDM69-DVBU16) ........ Mechanism Deck Section-3 (CDM69-DVBU16) ........ Mechanism Deck Section-4 (CDM69-DVBU16) ........ Mechanism Deck Section-5 (CDM69-DVBU16) ........ Mechanism Deck Section-6 (CDM69-DVBU16) ........ Optical Pick-up Section (DVBU16) ............................. 9. ELECTRICAL PARTS LIST ............................. 120 7-32. 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 88 107 108 109 110 111 112 113 114 115 116 117 118 119 HCD-C770/C990 Ver 1.3 SECTION 1 SERVICING NOTES NOTES ON HANDLING THE OPTICAL PICK-UP BLOCK OR BASE UNIT The laser diode in the optical pick-up block may suffer electrostatic break-down because of the potential difference generated by the charged electrostatic load, etc. on clothing and the human body. During repair, pay attention to electrostatic break-down and also use the procedure in the printed matter which is included in the repair parts. The flexible board is easily damaged and should be handled with care. NOTES ON LASER DIODE EMISSION CHECK The laser beam on this model is concentrated so as to be focused on the disc reflective surface by the objective lens in the optical pick-up block. Therefore, when checking the laser diode emission, observe from more than 30 cm away from the objective lens. JIG ON REPAIRING When repairing this set, etc., connect the extension cable as the figure shown below. extension cable (relay board-DVD board) (Part No. J-2501-143-A) RELEASING THE DISC SLOT LOCK The disc slot lock function for the antitheft of an demonstration disc in the store is equipped. Releasing Procedure: 1. Press two buttons of [DISC 1] and x simultaneously for five seconds. 2. The message “UNLOCKED” is displayed and the slot is unlocked. Note: When “LOCKED” is displayed, the slot lock is not released by turning power on/off with the [POWER] button. CHECKING OF OPERATIONS WITH REMOTE COMMANDERS OF DIFFERENT MODELS Some of the signal of remote commander vary between generation of player. Between DAV-S400/S500/S800/C450/C700/C900 and DAV-S550/ S880/C770/C900, remote commander signal codes of “FUNCTION”, “BAND”, “ST/MONO” and “MEMORY” are different. Take notice of the above when you check the operation with remote commanders of different models. extension cable (DVD board-AMP board) (Part No. J-2501-198-A) extension cable (DVD board-AMP board) (Part No. J-8000-024-A) extension cable (RF board-DVD board) (Part No. J-2501-217-A) 5 HCD-C770/C990 SECTION 2 GENERAL This section is extracted from instruction manual. LOCATION OF CONTROLS Front Panel STANDBY FUNCTION 1 POWER switch 2 STANDBY indicator 3 DISC 1 (play) /A (Eject)/indicator – DISC 5 (play) /A (Eject)/indicator 4 H (play) 5 X (pause) 6 x (stop) 7 ./> PREV/NEXT, PRESET –/+ 8 PHONES jack 9 0 qa qs qd qf qg qh BAND DISPLAY SOUND FIELD PHONES VOLUME control SOUND FIELD –/+ DISPLAY BAND FUNCTION Disc slot Front panel display (remote sensor) Rear Panel COMPONENT VIDEO OUT FRONT L FRONT R CENTER WOOFER IMPEDANCE USE R E A R WOOFER 3Ω L EXCEPT WOOFER 3Ω REAR R SPEAKER VIDEO 1 AM R AUDIO OUT L AUDIO IN L R MONITOR OUT SCAN SELECT VIDEO 2 VIDEO OUT VIDEO VIDEO IN S VIDEO SELECTABLE INTERLACE COAXIAL DVD ONLY OPTICAL DIGITAL IN FM 75Ω R L AUDIO IN VIDEO IN Y P B/CB PR/CR VIDEO 2 COMPONENT VIDEO OUT 1 2 3 4 5 6 SPEAKER jacks AM antenna VIDEO 1 jacks VIDEO 2 jacks COMPONENT VIDEO OUT/SCAN SELECT switch 6 MONITOR OUT (VIDEO/S VIDEO) jacks 7 VIDEO 2 (OPTICAL DIGITAL IN) jack 8 COMPONENT VIDEO OUT jacks 9 FM 75Ω COAXIAL antenna jack HCD-C770/C990 Front Panel Display When playing back a DVD Current sound Playing status PCM DIGITAL PRO LOGIC ALL 1 DISC S TITLE Play mode Lights up when you can change the angle Current chapter number CHAPTER H Current title number M S Playing time ANGLE REPEAT 1 Current repeat mode Current surround format When playing back a Super Audio CD, CD, VIDEO CD, or MP3 Current index number (The index indicator does not appear during Super Audio CD or MP3 playback.) Current sound TRACK PCM SACD DIGITAL INDEX M Lights up during PBC playback (VIDEO CD only) S REPEAT 1 PROG PBC SHUFFLE ALL 1 DISC S Play mode Current track number Playing time Current play mode Playing status When listening to the radio Preset number Monaural/Stereo effect TUNED MONO ST FM AM MHz Current band Current station 7 HCD-C770/C990 Remote 1 2 3 4 5 6 7 8 9 >10 10/0 Note This remote control glows in the dark. However, before glowing, the remote must be exposed to light for awhile. 8 1 2 3 4 5 6 TV [/1 (on/standby) Z (EJECT) NAME STEREO/MONO MEMORY CLEAR 7 8 9 q; qa qs PLAY MODE AUDIO ANGLE SUBTITLE VOL +/– ./> PREV/NEXT, TV CH –/+, PRESET –/+ qd qf qg qh qj qk H PLAY/SELECT DVD TOP MENU DVD DISPLAY C/X/x/c/ENTER DVD SETUP 1 (standby) ql w; wa ws wd wf DISC SKIP TV/VIDEO REPEAT MUTING TIME FUNCTION wg wh wj wk wl e; BAND Number buttons SOUND FIELD DISPLAY ENTER COMMAND MODE DVD TV switch ea es ed ef eg eh m/M/ / x STOP X PAUSE DVD MENU O RETURN AMP MENU SLOW, TUNING –/+ HCD-C770/C990 SECTION 3 DISASSEMBLY • This set can be disassembled in the order shown below. 3-1. DISASSEMBLY FLOW SET 3-2. FRONT PANEL (AL) SECTION, SIDE PANEL (L)/(R) (Page 10) 3-3. MECHANISM DECK (CDM69-DVBU16) (Page 10) 3-7. POWER BOARD (Page 12) 3-6. AMP BOARD (Page 12) 3-8. DVD BOARD (Page 13) 3-11. SW BOARD, BRACKET (TOP) ASSY (Page 14) 3-9. OPTICAL PICK-UP (DVBU16) (Page 13) 3-4. POWER SW BOARD (Page 11) 3-10. PICK-UP UNIT (TDP022W) (Page 14) 3-5. AUDIO BOARD, VIDEO BOARD (Page 11) 3-16. RUBBER ROLLER (SLIDER) ASSY (Page 17) 3-15. MOTOR (STOCKER) ASSY (MODE) (M761) (Page 16) 3-17. TIMING BELT (FRONT/REAR) (Page 17) 3-18. CAM (GEAR) (Page 18) 3-13. MOTOR (STOCKER) ASSY (STOCKER) (M781) (Page 15) 3-12. RELAY BOARD (Page 15) 3-14. MOTOR (STOCKER) ASSY (ROLLER) (M771) (Page 16) 3-19. SENSOR BOARD (Page 18) 9 HCD-C770/C990 Note: Follow the disassembly procedure in the numerical order given. 3-2. FRONT PANEL (AL) SECTION, SIDE PANEL (L)/(R) 7 front panel (AL) section 6 connector (CN807) 4 wire (flat type) (CN814) 8 two screws (BVTP3 × 8) 5 connector (CN900) 9 side panel (L) 3 1 three screws (BVTP3 × 8) 0 two screws (BVTP3 × 8) 2 three screws (BVTP3 × 8) qa side panel (R) 3-3. MECHANISM DECK (CDM69-DVBU16) 1 four screws (BVTP3 × 8) 4 wire (flat type) (CN002) 5 mechanism deck (CDM69-DVBU16) 3 wire (flat type) (CN701) 2 10 HCD-C770/C990 3-4. POWER SW BOARD 4 two screws (BVTP3 × 8) 7 four screws (BTP3 × 6) 9 power button section 5 connector (CN900) 1 screw (BVTP3 × 8) 2 SEL board 0 power SW board 6 connector (CN901) 8 MD cover sub assy 3 two screws (BVTP3 × 8) 3-5. AUDIO BOARD, VIDEO BOARD 6 connector (CN205) 5 wire (flat type) (CN208) 4 wire (flat type) (CN202) 3 wire (flat type) (CN201) 8 audio board 2 FM/AM tuner pack (DTP-001) 9 wire (flat type) (CN203) 0 two screws (BVTP3 × 8) 7 four screws (BVTP3 × 8) qa video board 1 two screws (BVTP2.6 × 8) 11 HCD-C770/C990 3-6. AMP BOARD 6 connector (CN302) 5 wire (flat type) (CN301) 1 four screws (BVTP3 × 8) 4 wire (flat type) (CN305) 8 AMP board 3 2 two screws (BVTP3 × 8) 7 connector (CN904) 3-7. POWER BOARD 2 connector (CN903) 3 connector (CN902) 1 connector (CN904) 4 four screws (BVTP3 × 8) 7 power board 6 power sheet 5 12 HCD-C770/C990 3-8. DVD BOARD 3 1 two screws (BVTP3 × 8) 2 two screws (BVTP3 × 8) 4 wire (flat type) (CN006) 8 two screws (BVTP3 × 8) 5 wire (flat type) (CN002) 9 DVD board 6 wire (flat type) (CN003) 7 wire (flat type) (CN401) 3-9. OPTICAL PICK-UP (DVBU16) 2 3 boss 1 screw (PTPWHM2.6) 5 boss 4 boss 6 optical pick-up (DVBU16) 13 HCD-C770/C990 3-10. PICK-UP UNIT (TDP022W) 1 step screw (M) 2 step screw (M) 7 insulator 4 0 pick-up unit (TDP022W) 8 insulator 3 step screw (M) 9 insulator 6 flexible board 5 connector (CN003) holder (DBU1) section 3-11. SW BOARD, BRACKET (TOP) ASSY 4 SW board (3) 3 SW board (2) 1 four screws (BTP2.6 × 6) 2 SW board (1) 7 bracket (top) assy 14 5 SW board (4) 6 six screws (BVTP2.6 × 8) HCD-C770/C990 3-12. RELAY BOARD 0 relay board 3 – bottom view – 9 connector (CN708) relay board 8 connector (CN707) 4 connector (CN703) 1 Remove five solders. 5 connector (CN702) 2 four screws (BVTP2.6 × 8) 7 connector (CN706) 6 connector (CN710) 3-13. MOTOR (STOCKER) ASSY (STOCKER) (M781) 3 two screws (BVTP2.6 × 8) 4 2 Remove two solders 6 stocker motor board 5 connector (CN761) 7 motor (stocker) assy (stocker) (M781) 1 belt (stocker) 15 HCD-C770/C990 3-14. MOTOR (STOCKER) ASSY (ROLLER) (M771) 3 two screws (BVTP2.6 × 8) 2 Remove two solders. 4 roller motor board 5 motor (stocker) assy (roller) (M771) 1 belt (roller) 3-15. MOTOR (STOCKER) ASSY (MODE) (M761) 1 Remove five solders of rotary encoder. 3 two screws (BVTP2.6 × 8) 4 mode motor board 6 motor (stocker) assy (mode) (M761) mode motor board 2 Remove two solders of motor (M761) 5 belt (mode) 16 HCD-C770/C990 3-16. RUBBER ROLLER (SLIDER) ASSY 8 step screw 0 rubber roller (slider 4) assy 5 step screw 9 tension spring (slider 2) 1 step screw 6 tension spring (base slider 5) 2 rubber roller (slider S) assy qa rubber roller (slider 2) assy 3 tension spring (base slider 5) qs step screw 7 rubber roller (slider 1) assy qd rubber roller (slider 1) assy qf screw (BVTP2.6 × 8) 4 rubber roller (slider 5) assy qg sub chassis 3-17. TIMING BELT (FRONT/REAR) 3 slider (mode cam) assy 7 two gears (center) When install three timing belts, its pass under each claws. 8 timing belt (rear) timing belt (rear) 5 two gears (center) 9 timing belt (rear) claw 6 timing belt (front) timing belt (rear) claw claw claw 4 gear (timing) timing belt (front) 2 gear (mode cam) : Note 1 screw (PTPWH2.6 × 8) Note: Refer to assembly (Section 4) 17 HCD-C770/C990 3-18. CAM (GEAR) 6 gear (mode 4) 5 screw (PTPWH2.6 × 8) qs cam (gear) : Note 4 gear (mode 5) 3 screw (PTPWH2.6 × 8) 0 gear (mode 2) :Note 2 pulley (mode deceleration) qa screw (PTPWH2.6 × 8) 9 screw (PTPWH2.6 × 8) 1 screw (PTPWH2.6 × 8) 8 gear (mode 3) 7 screw (PTPWH2.6 × 8) Note: Refer to assembly (Section 4). 3-19. SENSOR BOARD Note: Refer to assembly (Section 4). qk harness qj claw 9 cam (eject lock) : Note 8 screw (PTPWH2.6 × 8) qs gear (eject lock) qg two claws qa cam (BU U/D) w; sensor board 7 shaft (shutter) 6 compression spring (shutter) qh rotary encoder (S701) qd gear (mode 1) ql screw (BVTP2.6 × 8) qf screw (PTPWH2.6 × 8) 5 base (shutter) block 3 screw (BVTP2.6 × 8) 0 screw (PTPWH2.6 × 8) 1 screw (PTPWH2.6 × 8) 18 4 two screws (BVTP2.6 × 8) 2 lever shutter (A) HCD-C770/C990 SECTION 4 ASSEMBLY Ver 1.5 • This set can be assembled in the order shown below. 4-1. HOW TO INSTALL THE CAM (EJECT LOCK) 1 Rotate the cam (BU U/D) fully in the direction of arrow. 2 Engage the gear (eject lock) and the gear of the cam (eject lock) aligning the mark with the center of the gear (eject lock). cam (BU U/D) mark gear (eject lock) cam (eject lock) – bottom view • front – 4-2. HOW TO INSTALL THE CAM (GEAR) 1 Check that the cam (BU U/D) can not be rotated in the direction of arrow. 2 Align the mark on the cam (gear) with the boss as shown in the figure and install the cam (gear). cam (gear) boss cam (BU U/D) mark – bottom view • front – 19 HCD-C770/C990 Ver 1.5 4-3. HOW TO INSTALL THE GEAR (MODE 2) 1 Align the mark on the rotary encoder (S701) with the projection of the assy. 2 Check that the cam (BU U/D) can not be rotated in the direction of arrow. 3 Install the gear (mode 2). rotary encoder (S701) cam (BU U/D) gear (mode 2) mark projection chassis – bottom view • front – 4-4. HOW TO INSTALL THE GEAR (MODE CAM) 1 Slide the shaft in the direction of arrow. 2 Align mark A on the gear (mode cam) with mark B on the slider (mode cam) assy, then install the gear (mode cam). 3 Check that mark C on the gear (mode cam) is in alignment with mark D on the cam (gear). shaft mark A gear (mode cam) mark D slider (mode cam) assy mark B mark C cam (gear) – bottom view • front – 20 HCD-C770/C990 Ver 1.5 4-5. HOW TO INSTALL THE ROTARY ENCODER (S702), GEAR (STOCKER COMMUNICATION) 4 gear (stocker communication) 5 screw (PTPWH2.6 × 8) 3 screw (PWH2 × 6) Engage the rotary encoder (S702) and the gear (stocker communication) as shown below in the figure. 7 two screws (PTPWH2.6 × 8) 1 rotary encoder (S702) 6 two gears (stocker communication) rotary encoder (S702) 2 five solders gear (stocker communication) relay board – rear – 4-6. HOW TO INSTALL THE CAM (STOCKER U/D) 1 Position the hole on the gear (stocker communication) on the screw of the rotary encoder (S702). rotary encoder (S702) hole screw gear (stocker communication) – rear – 3 screw (PTPWH2.6 × 8) 3 two screws (PTPWH2.6 × 8) 2 cam (stocker U/D) cam (stocker U/D) f mark cam (stocker U/D) f mark 2 two cams (stocker U/D) f mark cam (stocker U/D) To install three cams (stocker U/D), align each groove of the cam (stocker U/D) with each f mark on the chassis as shown in the figure. 21 HCD-C770/C990 Ver 1.5 4-7. HOW TO INSTALL THE STOCKER ASSY 1 Fit three shafts of the stocker assy in respective slits of the cams (stocker U/D). Note: For the location of slits of the cams (stocker U/D), see 4-6. HOW TO INSTALL CAM (STOCKER U/D). cam (stocker U/D) cam (stocker U/D) shaft stocker assy shaft cam (stocker U/D) cam (stocker U/D) cam (stocker U/D) shaft stocker assy pulley (stocker) pulley (stocker) A 2 Making sure that three shafts of the stocker assy fit in respective slits of the cams (stocker U/D), rotate the pulley (stocker) in the direction of arrow A by hand to store the stocker assy. 22 HCD-C770/C990 Ver 1.5 4-8. PHASE ADJUSTMENT BETWEEN PINIONS (SLIDER) AND SLIDER-1 TO 5 (L/R) 1 As shown in the following figure, adjust the portion A of each slider to the boss with the slider-1 to 5 (L) and the slider-1 to 5 (R) pushed in the arrow directions respectively (see Fig. 1). 2 Paying attention to the up/down direction of the pinion (slider) (see Fig. 2), install each pinion (slider) so that the portion B of each pinion (slider) meshes with the portion A of each slider (see Fig. 3). Note: Push in the pinion (slider) until the claw of the boss comes out above the pinion (slider) to lock. A boss pinion (slider) A A boss pinion (slider) A slider-5 (R) A slider-5 (L) boss A pinion (slider) slider-4 (L) slider-4 (R) slider-3 (L) slider-3 (R) slider-2 (L) slider-2 (R) slider-1 (L) A slider-1 (R) boss (Fig. 1) pinion (slider) A boss claw A pinion (slider) boss pinion (slider) A (Fig. 2) boss pinion (slider) portion B pinion (slider) portion B slider portion A slider portion A claw (Fig. 3) 23 HCD-C770/C990 SECTION 5 TEST MODE Ver 1.4 [GENERAL DESCRIPTION] The Test Mode allows you to make diagnosis and adjustment easily using the remote commander and monitor TV. The instructions, diagnostic results, etc. are given on the on-screen display (OSD). [TEST DISC LIST] Use the following test disc on test mode. TDV-520CSO (DVD-SL): PART No. J-2501-236-A LIV-P01 (CD): PART No. 4-999-032-01 TDV-540C (DVD-DL): PART No. J-2501-235-A 0-1. All (All items continuous check) This menu checks all diagnostic items continuously. Normally, all items are checked successively one after another automatically unless an error is found, but at a certain item that requires judgment through a visual check to the result, the following screen is displayed for the key entry. • Example display ### Syscon Diagnosis ### Note: Do not use exiting test disc for DVD. [STARTING TEST MODE] 1. Press the [POWER] button to turn the power on, and set the 2. 3. function to DVD. While pressing the x and [DISPLAY] button, turn the [VOLUME] knob clockwise to enter the test mode. It displays “TEST MODE” on the fluorescent indicator tube, and displays the Test Mode Menu on the monitor screen as follows. (At the bottom of the menu screen, the model name and revision number are displayed) Diag All Check No.2 Version 2-3. ROM Check Sum Check Sum = 2320 Press NEXT Key to Continue Press PREV Key to Repeat Test Mode Menu 0. 1. 2. 3. 4. 5. 6. Syscon Diagnosis Drive Auto Adjustment Drive Manual Operation Mecha Aging Emergency History Version Information Video Level Adjustment For the ROM Check, the check sum calculated by the Syscon is output, and therefore you must compare it with the specified value for confirmation. Following the message, press the [NEXT > ] button to go to the next item, or press the [. PREV] button to repeat the same operation again. To quit the diagnosis and return to Check Menu screen, press the [RETURN] key on the remote commander to display Check Menu. Exit: POWER Key Model :DAV-Cxxx Revision :x.xx 4. 5. To execute each function, select the desired menu and press its number on the remote commander (RM-SS880J). To release from test mode, press the [POWER] button and turn the power off. [OPERATING TEST MODE] 0. SYSCON DIAGNOSIS The same contents as board detail check by serial interface can be checked from the remote commander operation. On the Test Mode Menu screen, press [10/0] key on the remote commander, and the following Check Menu will be displayed. ### Syscon Diagnosis ### Check Menu 0. 1. 2. 3. 4. 5. 6. 7. Quit All Version EEPROM SPIO SD Bus Video Audio 0-0. Quit Quit the Syscon Diagnosis and return to the Test Mode Menu. 24 • Error occurred If an error occurred, the diagnosis is suspended and error is displayed. Press the [RETURN] key on the remote commander to quit the diagnosis, or press the [. PREV] button to repeat the same check where an error occurred, or press the [NEXT>] button to continue the check from the item next to faulty item. General Description of Checking Method Selecting 2 and subsequent items calls the submenu screen of each item. And selecting 2 and subsequent items executes respective menus and outputs the results. For the contents of each submenu, see “Check Items List” as below. Check Items List: 0-2. Version 0-2-1. All 0-2-2. Revision 0-2-3. ROM Check Sum 0-2-4. Model Type 0-2-5. Region 0-3. EEPROM Check 0-3-1. Sampling Check 0-3-2. Detail Check 0-4. GP I/O Check 0-5. SD Bus Check 0-6. Video Check 0-7. Audio Check 0-2. Version 0-2-2. Revision The revision number of ROM (IC204) that the program for the DVD system processor (IC206) is stored. (4 digits hexadecimal number) HCD-C770/C990 0-2-3. ROM Check Sum The revision number of ROM (IC204) that the program for the DVD system processor (IC206) is stored. 0-2-4. Model Type Model name is displayed. (DAV-C770 or DAV-C990) 0-2-5. Region Model destination code is displayed. (2 digits number) 0-3. EEPROM Check 0-3-1. Sampling Check EEPROM check at every 64 words. It compares read data with write data of each address. When there are discrepancies between two data, it displays error. 0-3-2. Detail Check EEPROM check at every 1 word. It compares read data with write data of each address. When there are discrepancies between two data, it displays error. 0-4. GP I/O Check Pull up/down setting check of the DVD system processor (IC206) pin 150, 151 and 154 (for clock setting port). 0-5. SD Bus Check SD bus data check between DVD decoder (IC701) and D-RAM (IC706). 0-6. Video Check Output the color bars for video level adjustment. 0-7. Audio Check Output the test signal (1kHz sine wave) for 5.1 CH test. 1. DRIVE AUTO ADJUSTMENT On the Test Mode Menu screen, press the [1] key on the remote commander, and the Adjustment Menu will be displayed. ## Drive Auto Adjustment ## Adjustment Menu 0. 1. 2. 3. ALL DVD-SL CD DVD-DL specified disc following the message. You can finish the adjustment by pressing the [RETURN] button on the remote commander. Note: During adjustment of each disc, the measurement for disc type judgment is made. As automatic adjustment does not judge the disc type unlike conventional models, take care not to insert wrong type discs. Also, do not give a shock during adjustment. 1-1. DVD-SL (single layer) Press the [1] key on the remote commander and insert a DVD single layer disc following the message. Then the adjustment will be made through the steps below, then adjusted values will be written to the EEPROM. DVD Single Layer Disc Adjustment Steps: 1. Sled tilt reset 2. Disc check memory SL 3. Wait 300 msec 4. Set disc type SL 5. LD on 6. Spindle start 7. Wait 1 sec 8. Focus servo on 0 9. Auto track offset adjust 10. CLVA on 11. Wait 500 msec 12. Tracking on 13. Wait 1 sec 14. Sled on 15. Check CLV on 16. Auto LFO adjust 17. Auto focus offset adjust 18. Auto tilt position adjust 19. Auto focus gain adjust 20. Auto focus offset adjust 21. EQ boost adjust 22. Auto loop filter offset adjust 23. Auto track gain adjust Search Check 24. 32 track jump forward 25. 32 track jump reverse 26. 500 track jump forward 27. 500 track jump reverse 28. All servo stop 29. EEP copy loop filter offset 1-2. CD Press the [2] key on the remote commander and insert a CD disc following the message. Then the adjustment will be made through the steps below, then adjusted values will be written to the EEPROM. Exit: RETURN Normally, [10/0] is selected to adjust DVD (single layer), CD and DVD (dual layer) in this order. But, individual items can be adjusted for the case where adjustment is suspended due to an error. In this mode, the adjustment can be made easily through the operation following the message displayed on the screen. The disc used for adjustment must be the one specified for adjustment. 1-0. ALL Press the [10/0] key on the remote commander, and the servo set data in EEPROM will be initialized. Then, 1. DVD-SL disc, 2. CD disc and 3. DVD-DL disc are adjusted in this order. Each time one disc was adjusted, it is ejected. Replace it with the CD Adjustment Steps 1. Sled tilt rest 2. Disc check memory CD 3. Wait 500 msec 4. Set disc type CD 5. LD on 6. Spindle start 7. Wait 500 msec 8. Focus servo on 0 9. Auto track offset adjust 10. CLVA on 11. Wait 500 msec 12. Tracking on 13. (TC display start) 14. Wait 1 sec 15. Jitter display start 16. Sled ON 25 HCD-C770/C990 17. Check CLV on 18. Auto loop filter offset adjust 19. Auto focus offset adjust 20. Auto focus gain adjust 21. Auto focus offset adjust 22. EQ boost adjust 23. Auto LFO Adjust 24. Auto track gain adjust Search Check 25. 32Tj forward 26. 32Tj reverse 27. 500Tj forward 28. 500Tj reverse 29. All servo stop 1-3. DVD-DL (dual layer) Press the [3] key on the remote commander and insert a DVD dual layer disc following the message. Then the adjustment will be made through the steps below, then adjusted values will be written to the EEPROM. DVD Dual Layer Disc Adjustment Steps: 1. Sled tilt reset 2. Disc check memory DL 3. Wait 500 msec 4. Set disc type DL 5. LD on 6. Spindle start 7. Wait 1 sec Layer 1 Adjust 8. Focus servo on 0 9. Auto track offset adjust 10. CLVA on 11. Wait 500 msec 12. Tracking on 13. Wait 500 msec 14. Sled on 15. Check CLV lock 16. Auto loop filter offset adjust, Auto focus adjust 17. Auto focus gain adjust 18. Auto focus offset adjust 19. EQ boost adjust 20. Auto loop filter offset adjust 21. Auto Track Gain Adjust Search Check 22. 32 track jump forward 23. 32 track jump reverse 24. 500 track jump forward 25. 500 track jump reverse Layer 0 Adjust 26. Focus jump (L1 t L0) 27. Auto track offset adjust L0 28. CLVA on 29. Wait 500 msec 30. Tracking on 31. Wait 500 msec 32. Sled on 33. Check CLV lock 34. Auto focus filter offset adjust 35. Auto Focus Adjust 36. Auto focus gain adjust 37. Auto focus offset adjust 38. EQ boost adjust 39. Auto Loop Filter Offset 40. Auto track gain adjust Search Check 41. 32 track jump forward 26 42. 32 track jump reverse 43. 500 track jump forward 44. 500 track jump reverse Layer Jump Check 45. Layer jump (L0 ? L1) 46. Layer jump (L1 ? L0) 47. All servo stop 2. DRIVE MANUAL OPERATION Note: This mode is used for design, and not used in service fundamentally. On the Test Mode Menu screen, press the [2] key on the remote commander, and the Operation Menu will be displayed. For the manual operation, each servo on/off control and adjustment can be executed manually. ## Drive Manual Operation ## Operation Menu 1. Disc Type 2. Servo Control 3. Track/Layer Jump 4. Non EEPROM Write Adjust 5. EEPROM Write Adjust 6. Memory Check 7. Disc Check Memory 8. Error Rate Display 9. SACD Water Mark Exit: RETURN In using the manual operation menu, take care of the following points. These commands do not provide protection, thus requiring correct operation. The sector address or time code field is displayed when a disc is loaded. Note: 1. Set correctly the disc type to be used on the Disc Type screen. 2. In case of an alarm, immediately press the x button to stop the servo operation, and press the [POWER] button to turn the power off. Basic operation: (controllable from front panel or remote commander) [POWER] : Power OFF (release the Test Mode) x : Servo stop Z (DISC1 to 4) : Stop and eject/Loading [RETURN] : Return to Operation Menu or Test Mode Menu [. PREV], [NEXT>] : Transition between sub modes of menu [1] to [9], [10/0] : Selection of menu items Cursor o / O : Increase/Decrease in manually adjusted value HCD-C770/C990 2-1. Disc Type Disc Type Disc Type Select 1. 2. 3. 4. Disc Type Auto Check Set Disc Type DVD Set Disc Type CD Set Disc Type Hybrid Exit: RETURN 2-1-1. Disc Type Auto Check 1) Press the [1] key on the remote commander to display the Disc Type Auto Check screen. 2) Insert a disc and press the [ENTER] key on the remote commander. 3) It judges the type of inserted disc automatically and displays the disc type and so on as below. Disc Type Auto Check Disc Type Layer xx Mirr Time Mirr Count FZC Count PI Reference PI Peak xx xx xx xx xx xx 2-1-3. Disc Type CD It sets up so that it may judge as a disc type of specification of the disc with which the set was inserted. [1]: CD disc (normal speed, 12 cm) [2]: CD disc (double speed, 12 cm) [3]: CD disc (normal speed, 8 cm) [4]: CD disc (double speed, 8 cm) [5]: CD-RW disc (normal speed, 12 cm) [6]: CD-RW disc (double speed, 12 cm) [7]: CD-RW disc (normal speed, 8 cm) [8]: CD-RW disc (double speed, 8 cm) 2-1-4. Disc Type Hybrid It sets up so that it may judge as a disc type of specification of the disc with which the set was inserted. [1]: SACD Hybrid disc (SACD layer, 12 cm) [2]: SACD Hybrid disc (CD layer, normal speed, 12 cm) [3]: SACD Hybrid disc (CD layer, double speed, 12 cm) [4]: SACD Hybrid disc (SACD layer, 8 cm) [5]: SACD Hybrid disc (CD layer, normal speed, 8 cm) [6]: SACD Hybrid disc (CD layer, double speed, 8 cm) 2-2. Servo Control Note: Be sure to perform the disc type setup before performing this item. Servo Control 1.LD off R.Sled 2.Focus off L.Sled 3.SPDL off U.Sled 4.CLVA off D.Sled 5.Trk. off 6.Sled off 7.Fcs.Srch off 8.Fcs.OppL off FWD REV Reset Limit 0.All Servo Off ENTER.Execute Exit: RETURN Exit: RETURN Disc Type Layer Mirr Time : CD, DVD or Hybrid (SACD) : SINGLE, DUAL or HYBRID : Mirror time of between disc surface and record surface when disc type judgment. (hexadecimal number) Mirr Count : The number of times which mirror counts between disc surface and record surface when disc type judging. (hexadecimal number) FZC Count : The number of times which focus zero cross points of each layer when lens down. (hexadecimal number) PI Reference : The average of PI reference voltage. (hexadecimal number) PI Peak : PI peak level voltage. It performs only when disc type judgment is successful. (hexadecimal number) 2-1-2. Disc Type DVD It sets up so that it may judge as a disc type of specification of the disc with which the set was inserted. [1]: DVD single layer disc (12 cm) [2]: DVD dual layer disc (0 layer, 12 cm) [3]: DVD dual layer disc (1 layer, 12 cm) [4]: DVD-RW disc (12 cm) [5]: DVD single layer disc (8 cm) [6]: DVD dual layer disc (0 layer, 8 cm) [7]: DVD dual layer disc (1 layer, 8 cm) On this screen, the servo on/off control necessary for replay is executed. Normally, turn on each servo from 1 sequentially and when CLVA is turned on, the usual trace mode becomes active. In the trace mode, DVD sector address or CD time code is displayed. This is not displayed where the spindle is not locked. The spindle could run overriding the control if the spindle system is faulty or RF is not present. In such a case, do not operate CLVA. [1] LD [2] Focus [3] SPDL [4] CLVA [5] Trk. [6] Sled [7] FCS. Srch [8] FCS. OppL : Turn on/off the laser. : Search the focus and turn on the focus. : Turn on/off the spindle. : Turn on/off normal servo of spindle servo. : Turn on/off the tracking servo. : Turn on/off the sled servo. : Turn on/off the focus search. : Turn on/off the focus search to another layer of designated layer in Disc Type setting. (dual layer disc only) [10/0] : All servo off. [R] Sled FWD (right cursor) : Move the sled forward. [L] Sled REV (left cursor) : Move the sled reverse. [U] Sled FWD (up cursor) : Reset the sled. [D] Sled REV (down cursor) : Limit in the sled. 27 HCD-C770/C990 2-5. EEPROM Write Adjust 2-3. Track/Layer Jump 1. 1Tj 2. 1Tj 3.500Tj 4.500Tj 5.10kTj 6.10kTj 7.20kTj 8.20kTj Track/Layer Jump FWD R.Lj L0>L1 REV L.Lj L1>L0 Fine FWD U.Fj L0>L1 Fine REV D.Fj L1>L0 Dirc FWD Dirc REV Dirc FWD Dirc REV EEPROM Write Adjust 1. 2. 3. 4. 5. 6. Focus Focus Trk. —————— Trk. EQ Offset Gain Offset Coarse Gain Boost 0.All Servo Off 0. All Servo Off Exit: RETURN On this screen, track jump, etc. can be performed. Only for the DVD dual layer disc, the focus jump and layer jump are displayed in the right field [1] 1Tj FWD : 1 track jump forward. [2] 1Tj REV : 1 track jump reverse. [3] 500Tj FWD: 500 track jump (fine search)forward. [4] 500Tj REV : 500 track jump (fine search) reverse. [5] 10kTj FWD: 10k track jump (direct search) forward. [6] 10kTj REV : 10k track jump (direct search) reverse. [7] 20kTj FWD: 20k track jump (direct search) forward. [8] 20kTj REV : 20k track jump (direct search) reverse. [10/0] : All servo off. 2-4. Non EEPROM Write Adjust Non EEPROM Write Adjust 1. 2. 3. 4. 5. 6. Focus Focus Trk. Trk. Trk. EQ Offset Gain Offset Coarse Offset Fine Gain Boost 0.All Servo Off Exit: RETURN On this screen, each item can be adjusted manually. Select the desired number [1] to [10/0] from the remote commander, and current setting for the selected item will be displayed, then increase or decrease numeric value with the O key or o key. This value is stored in the EEPROM. If CLV has been applied, the jitter is displayed for reference for the adjustment. Exit: RETURN On this screen, each item can be adjusted automatically. Select the desired number [1] to [10/0] from the remote commander, and selected item is adjusted automatically. [1] Focus Offset : Adjusts focus offset. [2] Focus Gain : Adjusts focus gain. [3] TRK. Offset : Adjusts tracking offset of the RF amp (IC001) side. [5] TRK. Gain : Adjusts track gain. [6] EQ Boost : Adjusts amount of boost of equalizer. [10/0] : All servo off. 2-6. Memory Check Display images are shown as follows, and all two screens are able to switch by the O key (UP) or o key (DW). EEPROM Data 1/2 CD Focus Gain xx Trk. Gain xx Focus Offset xx Trk. Offset xx EQ. Boost xx PI Level xx Fcs. Balance -Jitter xx xx Mirror Time xx FE Level -Traverse Lv1. -Next:DW Default:CLR EEPROM Focus Trk. Focus Trk. EQ. Data 2/2 Gain Gain Offset Offset Boost SL L0 L1 xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx -- -xx -- -xx xx xx xx -xx -- -xx -- -Exit:RET CDRW DVDRW xx xx xx xx xx xx xx xx xx xx [1] Focus Offset : Adjusts focus offset. [2] Focus Gain : Adjusts focus gain. [3] TRK. Offset : Adjusts tracking offset of the RF amp (IC001) side. [4] TRK. Offset : Adjusts tracking offset of the DSP (IC401) side. [5] TRK. Gain : Adjusts track gain. [6] EQ Boost : Adjusts amount of boost of equalizer. [10/0] : All servo off. 28 Next:UP Default:CLR Exit:RET On this screen, current servo adjusted data stored in the EEPROM are displayed. The adjusted data are initialized by pressing the [CLEAR] key, but be careful that they are not recoverable after initialization. Before clearing the adjusted data, make a note of the set data. This screen will also appear if [0]-All is selected in the Drive Auto Adjustment. In this case, default setting cannot be made. HCD-C770/C990 2-7. Disc Check Memory 3. Disc Check Memory MECHA AGING On the Test Mode Menu screen, selecting [3] executes the aging of the mechanism deck. 1. SL Disc check 2. SL Disc check 3. SL Disc check ### Aging Test MENU ### Operation Menu 1. Open/Close Test Exit: RETURN On this screen, measure the mirror time of chucked disc, and write to the EEPROM. 2-8. Error Rate Display Exit: RETURN 1) Error Rate Display UC CR ADD PI1 Err Now xx xxxx xxxxxxxx Max xx xxxx xxxxxxxx Avg xx xxxx xxxxxxxx PI2 Err Now xx xxxx xxxxxxxx Max xx xxxx xxxxxxxx Avg xx xxxx xxxxxxxx PO Err Now xx xxxx xxxxxxxx Max xx xxxx xxxxxxxx Avg xx xxxx xxxxxxxx Exit: RETURN 2) 3) On the Aging Test MENU screen, press the [1] key on the remote commander to display the Open/Close Test screen. Insert discs and press the [ENTER] key on the remote commander. Is starts the aging. During aging, the disc number, operating status and repeat cycle are displayed. Aging can be aborted at any time by pressing the x key. After the operation is stopped, press the x key or [RETURN] key aging to return to the Aging Test MENU. 4. EMERGENCY HISTORY On the Test Mode Menu screen, selecting [4] displays the information such as servo emergency history. The history information from last 1 up to 10 can be scrolled with the O key or o key. Also, specific information can be displayed by directly entering that number with ten keys. On this screen, measure and display the error rate. UC : Incorrect value CR : Correct value Add : Address ### EMG. History ### Laser Hours CD xxxxhxxm DVD xxxxhxxm 2-9. SACD Water Mark Check a. bb xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx a. bb xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx SACD Water Mark Check PSP AMP PSN Start: ENTER Select:1-9 (1.Latest EMG.) Exit: RETURN On this screen, measure the PSP AMP value and PSN value of SACD water mark. Scroll:UP/DOWN Exit: RETURN xxxxhxxm : The laser on total hours. Data below minutes are omitted. a. : Error number. bb : Error code. xx : Not used. • Clearing History Information Clearing laser hours: Press the [DVD DISPLAY] and [CLEAR] keys in this order. Then both CD and DVD data are cleared. Clearing emergency history: Press the [DVD TOP MENU] and [CLEAR] keys in this order. Initializing set up data: Press [DVD MENU] and [CLEAR] keys in this order. The data have been initialized when “Set Up Initialized” message is displayed. The EMG. History screen will be restored soon. 29 HCD-C770/C990 • Code list of Emergency History 10: Communication to RF AMP (IC001) failed. 11: Each servo for focus, tracking, and spindle is unlocked. 12: Check sum error of EEPROM (IC203). 14: Communication to servo DSP (IC401) failed, or servo DSP decoder (IC801) is faulty. 15: Communication to DVD decoder (IC701) failed, or DVD decoder (IC801) is faulty. 16: Communication to DSD decoder (IC801) failed, or DSD decoder (IC801) is faulty. 20: Initialization of sled servo failed. It is not placed in the initial position. 23: Sled servo operation error. 24: Made a request to move the sled servo to wrong position. 30: Tracking balance adjustment error. 31: Tracking gain adjustment error. 33: Focus bias adjustment error. 34: Focus gain adjustment error. 35: Equalizer adjustment error. 40: Focus servo does not operate. 41: With a DVD dual layer disc, focus jump failed. 50: CLV (spindle) servo does not operate. 51: Spindle does not stop. 60: Made a request to seek nonexistent address. 61: Seek error of retry more than regulated times. 70: Control data could not be read. 80: Disc reading failed. 5. MECHA ERROR HISTORY On the Test Mode Menu screen, selecting [5] displays the information of mechanism deck error history. The history information from last 1 up to 8 can be scrolled with the O key or o key. Also, specific information can be displayed by directly entering that number with ten keys. ### Mecha Error History ### 1. 2. 3. 4. 5. 6. 7. 8. aa aa aa aa aa aa aa aa bb bb bb bb bb bb bb bb cc cc cc cc cc cc cc cc dd dd dd dd dd dd dd dd (1.Latest Err.) aa : bb : cc : dd : xx : 30 xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx Scroll:UP/DOWN Exit: RETURN The error in the midst of initializing the mechanism deck. The error in the midst of loading operation. The error in the midst of up/down the stocker. The error in the midst of switching the mechanism deck mode. Not used. • Error code (aa) FF : Complete the initializing. (normal operation) 11 : Stocker movement (to chucking position) failing in the midst of initializing the mechanism deck. 12 : Stocker movement (to chucking position) failing in the midst of initializing the mechanism deck. 1x : Initializing the mechanism deck. 2x : Initializing the mechanism deck. 3x : Initializing the mechanism deck. 41 : Disc eject failing in the midst of initializing the mechanism deck. 4x : Initializing the mechanism deck. 50 : Disc eject failing in the midst of initializing the mechanism deck. 5x : Initializing the mechanism deck. A2 : Disc eject failing in the midst of initializing the mechanism deck. Ax : Initializing the mechanism deck. D3 : Disc eject failing in the midst of initializing the mechanism deck. Dx : Initializing the mechanism deck. Ex : Initializing the mechanism deck. • Error code (bb) 00 : Initializing the mechanism deck. 10 : Retry over of eject and loading. 30 : Open operation in no disc status. 60 : Retry over of eject and loading. 70 : Disc is chucking position. 81 : Retry failed of disc movement from chucking position to stocker. 83 : Retry preparation failed of disc movement from chucking position to stocker. 90 : Disc is stored in the stocker. A1 : Retry failed of disc movement from stocker to chucking position. A3 : Retry preparation failed of disc movement from stocker to chucking position. B0 : Just before the release operation. B1 : Retry failed of the release operation. • Error code (cc) 10 : Under a stop. 22 : Retry preparation failed. 23 : Retry failed. • Error code (dd) 10 : Under a stop. 22 : Retry preparation failed. 23 : Retry failed. HCD-C770/C990 SECTION 6 ELECTRICAL ADJUSTMENT 6. VERSION INFORMATION AUTO SERVO ADJUSTMENT On the Test Mode Menu screen, selecting [6] displays the ROM version and region code. The parenthesized hexadecimal number in version field is checksum value of ROM. After parts related to the servo circuit (RF amplifier (IC001), DSP (IC401), motor driver (IC501), EEPROM (IC302) so on) are replaced, re-adjusting the servo circuit is necessary. Select “ALL” at “1. DRIVE AUTO ADJUSTMENT” (Refer to page 25 in TEST MODE) and adjust DVD-SL (single layer), CD and DVD-DL (dual layer). ## Version Information ## IF con. Ver.x. xx SYScon. Ver.x. xx (xxxx) Model DAV-Cxxx Region 0x Front End Ver.x.xx Exit: RETURN IF con. : The version of system controller (IC901). SYScon. : The version of DVD system processor (IC206). Front End : The version of mechanism controller (IC301). 7. VIDEO LEVEL ADJUSTMENT On the Test Mode Menu screen, selecting [7] displays color bars for video level adjustment. During display of color bars, OSD disappears but the menu screen will be restored if pressing the [RETURN] key. 31 31 Ver 1.4 HCD-C770/C990 SECTION 7 DIAGRAMS 7-1. BLOCK DIAGRAM – RF SERVO Section – • SIGNAL PATH WARFI : AUDIO : CD PLAY CDDOUT : DVD PLAY : VIDEO : SACD PLAY HDB0 – HDB7 DOUT 64 RF 1 DVDRFP ATOP 62 59 AIP FNP 53 54 DIP 63 RFSIN ATON 61 60 AIN FNN 52 55 DIN RFAC 57 50 RFAC PCMD 66 160 MDAT 44, 41, 39, 35, 32, 30, 27, 24 117 RFIN A (Page 33) B (Page 33) SD0 – SD7 (for AUDIO SYSTEM) C AV DATA BUS D XTAI 71 TRK+ TRK– BUFFER 40 36 37 FOCUS COIL DRIVE 48 1 34 35 TRACKING COIL DRIVE FE PI AVC (1.65V) 42 3 4 M 32 31 30 29 SLED MOTOR DRIVE 7 SLED MOTOR DRIVE TE SE FE LOCK 24 GFS 13 MUTE 3 75 LOCK CD 71 GFS CD 59 MUTE CD RFDC 38 VC 42 CE FF FR FF FR TF TR FF FR M2 (SLED) 41 40 39 43 76 28 31 SLED 61 (Page 33) WE OE RAS UCAS LCAS H (Page 33) I (Page 35) J (Page 33) K (Page 33) L (Page 35) M (Page 33) I/O0 – I/O15 17 33 18 34 35 MDB0 – MDB9, MDBA – MDBF 76 94 78 95 107 GFS 164 XRST 109 92 53 768FS XRST_DSD COUT 19 SCLK 8 FOK 22 MIRR 20 30 72 74 29 COUT CD SCLK CD FOK CD MIRR JIT OFFSET 45 XSRQ JIT 64 SACD/DVD SELECT IC814 COMPARATOR IC703 (1/2) XSRQ-ZIVA SACD/DVD 77 SPINDLE MOTOR DRIVE 13 47 46 BUFFER 45 SDATA RF SDCLK RF SDEN 83 82 2 27 28 6 EEP SI 5 EEP CLK 100 EEP CS 99 65 67 66 PI 63 SP ON 73 TSD EEP RDY TE FE PI 60 MUTE 2D TE FE 19 20 21 22 DATA_RF CLK_RF SDEN MIRR M WE XMOE XRAS XCAS 27M 29 SFDR 30 SRDR G 16Mbit D-RAM IC706 31 TFDR 32 TRDR AMP IC402 (1/2) (Page 35) 10 MUTE12 MUTE34 MUTE5 TSD-M M1 (SPINDLE) XRD XWR XCS XINT0 XINT1 XRST DVD 25 7 FCS JMP 1 8 FCS JMP 2 44 SLED B 43 SLED A 17 18 19 20 21 GFS DVD 58 33 FFDR 34 FRDR TF TR 85 84 12 22 23 XRD XWR XCS DVD INT0 DVD INT1 DVD A0 – A9 FOCUS/TRACKING COIL DRIVER, SPINDLE, SLED MOTOR DRIVER IC501 INLIM FCS+ FCS– TE LDSEL LD ON 2AXIS DEVICE FOCUS/ TRACKING COIL LASER DIODE SELECT Q301 DATA CD CLOK CD LAT CD SENS CD SQSO SQCK 2-5, 7-10, 41-44, 46-49 49 50 27 9 52 54 XSRQ 26 SCOR DATA 4 CLOK 6 XLAT 5 SENS 7 SQSO 76 SQCK 77 AEP0 SCOR 15 26 SSTP INLIM SW 3 DOCTR/ ISBTEST MNT1 MD2 63 36 V125 WCK F 2 21 DVDLD LDON 26 (Page 33) 137 MDIN2 135 SPO 98 MIRR MIRR 27 E XDCK, XSAC,, SDEFF (for VIDEO SYSTEM) 21-24, 27-32 XRST XDCK XSAC SDEF XSHD 66-69, 71, 73-75, 96, 97, 99, 101, 102, 104-106 TE FE PI TE 39 FE 40 MNTR 42 48 46 26 49 MNT2 93 D0 – D7 22 CDLD BUFFER IC703 (2/2) MDP 25 XDCK XSAK HDB8 XSHD 167 XTA1 169 XTA2 170 XTAL 172-176, 1, 2, 4 SDATA 47 SCLK 46 SDEN 48 XDCK, XSAC, SDEF, XSHD (for AUDIO SYSTEM) 79, 80, 82-87, 89, 91 DATA_RF CLK_RF SDEN WFCK SBIN EXCK SCOR (Page 35) DVD DECODER IC701 10 3 13 9 24 CDPD 23 DVDPD AUTOMATIC POWER CONTROL (FOR DVD) Q001 CLOCK GENERATOR IC303 8 151 148 147 150 A0 – A7 LASER DVD LD DIODE (FOR DVD) 7 BCK LRCK C2PO GSCOR 5, 7, 9-14 PD CD A CD B CD C CD D CD/DVD/SACD RF AMP, FOCUS/TRACKING ERROR AMP IC001 X302 27MHz D0 – D7 14-21 AUTOMATIC POWER CONTROL (FOR CD) Q002 16 15 14 13 DIGITAL SIGNAL PROCESSOR, DIGITAL SERVO PROCESSOR IC401 WFCK SBSO EXCK SCOR 158 163 155 146 A0 – A7 89-96 CD LD B A D C A B C D WFCK SBSO EXCK SCOR XDRST OPTICAL PICK-UP BLOCK (TDP022W) 12 11 10 9 BCLK LRCK C2PO GSCOR BCLK LRCK C2PO GSCOR MA0 – MA9 17 CD F B A D C LASER DIODE (FOR CD) WFCK 10 SBSO 79 EXCK 80 18 CD E E 67 65 14 17 SO2 XTI MO1 SO3 XTO SO1 F BCLK LRCK C2PO WDCK A2 B2 C2 D2 27M 768FS 3 4 5 6 D C B A DETECTOR A B C D (Page 33) SD0 – SD7 (for VIDEO SYSTEM) MECHANISM CONTROLLER IC301 (1/2) 62 FG 32 32 SDIN DSD SDOUT DSD SCK DSD XMSLAT READY DSD MUTE DSD 47 46 24 51 48 53 5 SDA 6 SCL 7 WP EEPROM IC302 MSDATO MSDATI MSCK XMSLAT SHRRDY SHRMUT MSDATO, MSDATI, MSCK, XMSLAT, SHRRDY, SHRMUT HCD-C770/C990 7-2. BLOCK DIAGRAM – AUDIO (DSP) Section – D5V REFERENCE VOLTAGE GENERATOR IC402 (2/2) MSDATO MSDATI MSCK XMSLAT SHRRDY SHRMUT 6 4 3 2 7 10 XRST_DSD TDOSA TDISA TCK TMS TRST 29 27 26 30 31 CKOUT 49 F2BCK 43 F2LRCK 44 22 KFSIO 17 BCKI1 15 LRCKI1 SCKOUT BCKO LRCKO GP10 EXID1 MSDATO MSDATI MSCK XMSLAT MSREADY SMUTE TDO TDI TCK TMS TRST XWE XRAS XCAS DCKE DCLK (Page 35) O 15 17 16 34 35 WE RAS CAS CKE CLK OPTICAL RECEIVER IC204 X600 12.288MHz J205 (1/4) L R-CH R : AUX IN : OPTICAL DIGITAL IN : TUNER 57 EXID2 BCK2 LRCK2 29 BCK2 28 LRCK2 79 INIT 78 SYNC 77 SELEXT CKOUT BCK LRCK DIGITAL AUDIO INTERFACE IC606 DI DO 22 XIN CL CE XSTATE 21 XOUT XMODE 20 XMCK ERROR AUDIO : SACD PLAY 59 EXIMCK 55 EXIBCK 56 EXILRCK EXID2 9 MCLK1 X601 13.5MHz S-RAM IC604 CS0 44 WE0 45 41 OE 17 WE EXID1 DATA 16 5 DIN2 4 DIN1 3 DIN0 SPDIF VIDEO 1 AUDIO IN : CD PLAY 58 EXID1 EXIMCK EXIBCK EXILRCK 16Mbit SD-RAM IC808 143 145 144 142 141 CDDOUT OPTICAL DIGITAL IN VIDEO 2 DIGDI DIGCLK EXIMCK EXIBCK EXILRCK 13 14 15 33 HDIN 34 HCLK 35 HDOUT 32 HACN 68 GP9 PLOCK DIGDI DO DIGCLK CSDIR XST RSTDIR 36 35 38 37 17 48 34 24 PM HCS BST RSTDSP PM 113 HCS 36 BST 56 XRST 2 59 69 DIGDI, DIGCLK ENABLE SWITCH Q908 – 910 DET AMP Q201 FM-DET (AEP) (Page 35) (Page 34) P S AV0 – AV2 RSTAD Q206 16 6 X1 RDATA 2 RCLK 16 X0 13 14 4 MUX X201 4.332MHz 33 AD-RST TUDI TUDO TUCLK TCE TUN RDSD RDSC RDS DECODER IC201 RDSD RDSC (AEP) AV0 AV1 AV2 52 54 55 53 51 PM HCS BST RSTDSP 65 98 97 7 25 8 20 24 22 18 6 15 17 19 23 28 13 14 16 12 DSP-PM DSP-CS DSP-BST DSP-RST Q205 DAMP-MUTEN TUDI TUDO TUCLK TCE TUN AV0 DI DO CK CE TUNED AV2 GND D903 DIR-AD AM ANT AM BCK2 LRCK2 RSTDIR BCK 14 LRCK 13 DIR-ERR R-CH 5 RIN DSP-DO DSP-HACN DSP-GP9 R-CH R-CH DIGDI DO DIGCLK CSDIR L-CH DOUT 15 NSMUTE DIR-XST DIR-ZERO GND 1 LIN EXID2 Q903 LEVEL SHIFT IC900 DIG-DI DI DIG-CLK DIR-CE DIR-XMODE FM ANT AMP Q221 LOW-PASS FILTER IC603 TUN-DI TUN-DO TUN-CLK TUN-CE TUNED 88 RDS-DATA 94 RDS-CLK SYSTEM CONTROLLER IC901 (1/3) 95 AV-SEL0 96 AV-SEL1 48 AV-SEL2 33 33 R (Page 34) POWER ON MUTING Q490, 492 DF-SW COAXIAL FM 75Ω A/D CONVERTER IC602 SYSCLK RSTB 2 Y2 1 Y0 Y 3 5 Y1 A B 10 9 FM/AM TUNER PACK XST PLOCK AUDIO INPUT SELECTOR IC202 R-CH (Page 34) 12V DFIL RST2 DF-SYNC L R T D490 J206 (1/3) VIDEO 2 AUDIO IN : AUDIO EXLOCK GP8 B SCK BCKO LRCKO 14 20 19 67 DIGITAL AUDIO SIGNAL PROCESSOR IC607 12 MCLK2 (Page 32) • R-ch is omitted due to same as L-ch. • SIGNAL PATH D3 : DVD PLAY 164 XSRQ TDOSA, TDISA, TCK, TMS, TRST SDO3 25 DIGITAL AUDIO PROCESSOR IC612 DSD DECODER IC801 9 XRST XSRQ 62 DSBCKF 52 MCK 114 SDI3 D2 D0 – D15 MSDATO, MSDATI, MSCK, XMSLAT, SHRRDY, SHRMUT PHREFO 62 EXCKO1 13 F2SLR 45 (Page 34) A0 – A15 11 MCKI 68 DSISR SDO2 24 7-10, 13-16, 29-32, 35-38 N 768FS DSARS 76 30 SDI2 Q D1 5-1, 44-42, 27-24, 21-18 (Page 35) LEVEL SHIFT IC813 SDCK XSAK SDEF XSHD F2CSWEX2 46 D0 – D15 K 166 167 168 165 SDO1 23 108, 107, 105-102, 99 98, 80-77, 75-72 (Page 32) XDCK XSAK SDEF XSHD 67 DSISL 18 SDI1 A0 – A15 J SDEF, XSHD, XDCK, XSAK DSALS 74 F2FLREX1 47 D1 – D4, SCK, BCKO, LRCKO D4 SDO4 26 112, 110, 109, 97-92, 82-85, 66-64 (Page 32) LEVEL SHIFT IC812 AV DATA BUS DQ0 – DQ7 M SD0 – SD7 66 DSISW 2, 3, 5, 6, 8, 9, 11, 12 (Page 32) H 65 DSICT A0 – A11 (Page 32) DSAC 69 DSALFE 71 19-24, 27-32 E 64 DSIFR 139-136, 134-131 (Page 32) DSAR 66 DQ0 – DQ7 C 123 WCK A0 – A11 (Page 32) 63 DSIFL 162-159, 157-154, 152, 151, 149, 148 G DSAL 64 126 WARFI WCK 169 – 176 (Page 32) A SD0 – SD7 (Page 32) 127 WAVRB WARFI HCD-C770/C990 BLOCK DIAGRAM – AUDIO OUT, PANEL Section – VIDEO 1 AUDIO OUT P-MUTE MUTING CONTROL Q900 5 6 (Page 33) S (Page 33) Q OUTL2– 18 R MUTING Q207, 208 8 CDTI 7 CCLK OUTL1– 21 RSTAD NSMUTE SCDT SHIFT LATCH1 INIT PGMUTE SYSTEM CONTROLLER IC901 (2/3) 40 – 51 5 – 39 G1 – G12 S1 – S35 4 AD1 3 AD2 60 57 61 56 6 INA OUTA 9 (+) OUTB 19 (–) OUTR2+ 38 37 36 41 40 39 SCDT SCSHIFT SCLATCH INIT PGMUTE NSPMUTE D2 SCDT SHIFT LATCH2 INIT PGMUTE KEY0, KEY2 43 DATA 64 XFSIIN 44 BCK 45 LRCK (+) (–) D102 D3 92 SIRCS 85 EN-A 86 EN-B 6 INA OUTA 9 (+) OUTB 19 (–) OUTR2+ OUTL1+ 24 OUTL2+ 15 38 37 36 41 40 39 SCDT SCSHIFT SCLATCH INIT PGMUTE NSPMUTE DAMP-DATA DAMP-CLK CS1 CS2 CS3 DAMP-RST DAMP-MUTING 1 2 29 30 31 26 27 OVER LOAD DETECT Q103, 104 D103 7 17 8 18 FSOI 74 XFSOUT 77 POWER AMP IC306 6 INA OUTA 9 (+) 16 INB OUTB 19 (–) D106 SCK BCKO LRCKO SCDT SHIFT LATCH1 LATCH2 LATCH3 INIT PGMUTE SCDT SHIFT LATCH3 INIT PGMUTE POWER AMP IC309 43 DATA OUTL1+ 24 6 INA OUTA 9 (+) 64 XFSIIN 44 BCK 45 LRCK OUTL2+ 15 16 INB OUTB 19 (–) OUTR1+ 10 OUTR2+ 38 37 36 41 40 39 SCDT SCSHIFT SCLATCH INIT PGMUTE NSPMUTE 1 D104 7 17 8 18 REAR L OVER LOAD DETECT Q107, 108 FSOI 74 POWER AMP IC311 6 INA OUTA 9 (+) 16 INB OUTB 19 (–) REAR R ENA ENB DIAGA DIAGB 7 17 8 18 4 CQ-RST WOOFER OVER LOAD DETECT Q111, 112 S201 3 I2C-DATA 5 I2C-CLK 100 I2HLP CENTER OVER LOAD DETECT Q105, 106 SCAN SELECT I2CDATA I2CCLK I2HLP FRONT R POWER AMP IC307 STREAM PROCESSOR IC310 49 PROG SW V 9 OUTB 19 7 17 8 18 INTERLACE (Page 35) OUTA 16 INB X1 39 SELECTABLE ZIVARESET 6 INA 16 INB 1 XFSOIN 28 ROTARY ENCODER S800 POWER AMP IC304 OUTR1+ 10 93 WAKE VOLUME W BUFFER IC300 OVER LOAD DETECT Q109, 110 XFSOUT 77 X2 38 REMOTE CONTROL RECEIVER IC101 (Page 35) XFSOIN 28 X901 20MHz DISC INSERT DETECT Q914 D105 7 17 8 18 FSOCKO 73 FSOI 74 FRONT L ENA ENB DIAGA DIAGB 82 – 84 62 LED-CS 63 LED-CLR KEY0 – KEY2 14-17, 1-4, 6, 7 P1 – P10 SCK BCKO LRCKO SIRCS DETECT Q906, 907 I2CDATA, I2CCLK, I2HLP 1 XFSOIN 28 KEY INPUT DETECT IC903, 904 DISC IN OUTR1+ 10 STREAM PROCESSOR IC308 C818, R840 S801 – 805, S811 – 825 J401 SPEAKER 16 INB HP-SW HP-MUTE AU-MUTE DAS-CS 64 46 47 32 LED DRIVER IC801 D801 – 805 DISC1 – DISC5 32V OUTL2+ 15 7 17 8 18 HPSW HP-MUTE AU-MUTE DAS-CS 10 11 12 13 D192 OUTL1+ 24 OSC DATA CLK STB CLR POWER ON MUTING Q192 64 XFSIIN 44 BCK 45 LRCK FL-DATA FL-CLK FL-CS FL-MUTE OSC0 58 OSC1 59 D181 43 DATA X300 49.152MHz 63 62 61 60 MUTING Q900, 901 POWER AMP IC301 D1 DAT CLK CS RST HP-SW D180 D1 – D4, SCK, BCKO, LRCKO FLUORESCENT INDICATOR TUBE FL801 X 4 DAS-CS FL DRIVER IC802 (Page 36) OUTR2– MUTING CONTROL Q902 ENA ENB DIAGA DIAGB R 7 HADPHONE AMP IC401 AU-MUTE SCK BCKO LRCKO (Page 33) OUTR1– J900 PHONES ENA ENB DIAGA DIAGB T DIGDI DIGCLK AOUTR+ 10 AOUTR– 9 LOW-PASS FILTER IC610 ENA ENB DIAGA DIAGB (Page 33) DIGDI, DIGCLK 1 MCLK 2 BICK 4 LRCK STREAM PROCESSOR IC305 J205 (2/4) L ENA ENB DIAGA DIAGB SCK BCKO LRCKO AOUTL+ 12 AOUTL– 11 P-MUTE 3 SDTI CSN D4 : AUDIO HP-MUTE D/A CONVERTER IC608 • SIGNAL PATH PDN 7-3. DIP-RST 43 D101 OVER LOAD DETECT Q101, 102 FAN PROTECT DETECT Q113, 114 DIP-OCP 44 34 34 Y (Page 36) HCD-C770/C990 7-4. BLOCK DIAGRAM – VIDEO Section – J205 (3/4) • SIGNAL PATH VIDEO 1 VIDEO IN J206 (2/3) F XDCK, XSAK, SDEF XDCK XSAK SDEF OUT 7 14 2B OUT2 5 : COMPONENT VIDEO VIDEO 1 VIDEO OUT 75Ω DRIVER IC206 SW1 SW2 AV DATA BUS 177-174, 171-168 SD0 – SD7 : CHROMA J205 (4/4) 1 IN1 3 IN2 5 IN3 VDAC_0 131 :Y VIDEO SELECTOR IC209 VIDEO AMP, 75Ω DRIVER IC208 2 4 183 SDCLK 179 SDEN 182 SDERROR VDAC_2 125 9 3B OUT3 6 6 YIN YOUT 28 VDAC_1 128 1 1B OUT1 3 2 CIN COUT 33 WIDE SWITCH Q210, 214 4 CT2 CT3 CT1 (Page 32) D SDDATA0 – SDDATA7 VIDEO 2 VIDEO IN (Page 32) : VIDEO VIDEO INPUT SELECTOR IC207 2 3 S VIDEO 1 J202 MONITOR OUT 12 7 2 (Page 32) I (Page 32) L (Page 33) O 27M 139 XIN XSRQ_ZIAV 4 VIN VOUT 31 VIDEO 12 CYIN CYOUT 25 Y VDAC_3 122 14 CBIN CBOUT 22 PB/CB VDAC_4 119 16 CRIN CROUT 19 PR/CR 178 SDREQ SPDIF 156 IEC958 (Page 34) V ZIVARESET 202 RESET MUTE1 MUTE2 J206 (3/3) COMPONENT VIDEO OUT 3 15 P VS/WIDE 107 157 191 HAD0 – HAD15 22, 19-14, 11-3 HAD0 – HAD15 HA1 – HA3 2, 207, 206 190 195 27 25 MD0 – MD31 MA0 – MA12 42-33, 45, 46 48 47 57-60, 64-71, 75-78, 81-84, 88-95, 99-102 MCLK MCS0 MWE MRAS MCAS MDQM0 MDQM1 MDQM2 MDQM3 146 158 BA0 BA1 RST_SPC 188 HCS0 HREAD WEN.UDS CS_EEPROM 186 187 185 184 56 49 53 51 52 62 73 86 97 CE OE WE HIRQ2 WC_EEPROM 161 160 DVD SYSTEM PROCESSOR IC206 ALE DRVRDY 106 I2C_CTRL DRVTX DRVRX DRVCLK HIRQ1 I2HLP TDI TDO TCK TMS TRST HA1 – HA3 1 8 3 55, 54, 52, 51, 49-47, 45-40, 38-36 1D1 – 1D10, 2D1 – 2D6 Q302 SWITCHING IC802 34, 33, 31 2D7 – 2D9 1Q1 – 1Q10, 2Q1 – 2Q8 34 33 35 36 37 32 38 DRVRDY CS ZIVA RST MECHANISM CONTROLLER IC301 (2/2) 41 40 DATA & ADDRESS BUS HAD0 – HAD15 15-22, 24-31 DQ0 – DQ15 HA1 – HA3 11-9 2-8, 34-44 A0 – A2 A3 – A20 16Mbit PROGRAMMABLE ROM IC204 X301 20MHz 35 35 DQ0 – DQ31 A0 – A11 12 14 1 22 23 68 20 17 19 18 16 71 28 59 CLK CS WE RAS CAS DQM0 DQM1 DQM2 DQM3 21, 24-27, 60-66 128Mbit SD-RAM IC202 BUS INTERFACE IC215 ADDRESS BUS HA4 –HA21 78 79 SOZIVA SIZIVA SCKZIVA DRVIRQ 2, 3, 5, 6, 8-10, 12-17, 19-21, 23, 24 2,4,5,7,8,10,11,13,74,76,77,79,82,83,85,31, 33,34,36,37,39,40,42,45,47,48,50,51,53,54,56 56 29 CE OE WE FLIP-FLOP IC803 HA1 – HA3 CE OE WE EEPROM IC203 HAD0 – HAD15 1LE 2LE 6 DO 5 DI 4 SK BS0 BS1 DATA & ADDRESS BUS R/B WC CS I2CDATA I2CCLK XTAL I2HLP, I2CDATA, I2CCLK 199 198 201 200 197 EXTAL W TDOSA TDISA TCK TNS TRST I2C_DA I2C_CL (Page 34) N AV0 – AV2 AV2 AV0 AV1 I2C SIO I2C-CLK (Page 33) TDOSA, TDISA, TCK, TMS, TRST (Page 33) HCD-C770/C990 BLOCK DIAGRAM – CHANGER, POWER SUPPLY Section – CHANGER CONTROLLER (MOTOR, SWITCH) IC902 STOCKER MOTOR DRIVE IC721 M761 (STOCKER) 4 OUT1 2 OUT2 M FIN 7 RIN 9 DC-DC CONVERTER T801 FL FL1 20 P4 19 P5 TO FLUORESCENT INDICATOR TUBE RECT D806 – 809 VFL ROLLER MOTOR DRIVE IC711 M781 (ROLLER) 4 OUT1 2 OUT2 M OSC Q803, 804 FIN 7 RIN 9 22 P2 21 P3 STREAM PROCESSOR +3.3V MODE MOTOR DRIVE IC701 4 OUT1 2 OUT2 S716 S718 (Page 34) In the midst disc is moving between play position and stocker, ON: disc is play position side, OFF: disc is stocker side S714 (DISC IN (8cm)) X DISC IN A3.3V 8 P12 +3.3V REGULATOR IC001 S715 (DISC OUT) CHANGER CONTROLLER (ROTARY ENCODER) IC906 11 P9 S716 (STOCKER IN/OUT) A5V, RF+5V DA05V, VIDEO +5V +5V REGULATOR IC004 +5V REGULATOR IC002 9 P11 S717 (DISC POSITION) ROTARY ENCODER S771 10 P10 S718 (STOCKING) 12 P8 OFF: In the midst disc is moving between play position and stocker LEVEL SHIFT Q731 D5V ROTARY ENCODER S702 B+ SWITCH Q003, 004 +32V (AMP +32V) DISC INSERT DETECT SENSOR IC751 +6.5V REGULATOR IC903 +6.5V (AMP +6.5V) (STOCKER POSITION) 79 PARA-DATA 72 PARA-CLK 71 PARA-LT1 69 +5V REGULATOR IC003 (MODE) D/A, A/D +5V OPT-SEN S717 7 P13 OFF: When disc out from play position OFF: The moment disc in/out from stocker +3.3V REGULATOR IC005 5 P15 S713 (DISC IN (8/12cm)) ON: Play position (8cm disc only) +5V REGULATOR IC302 +2.6V REGULATOR IC605 DA03V 5–8 S715 DSP +2.6V S711 (DISC INSERT (8/12cm)) S713 (ON: Play position) S714 23 P0 24 P1 P15 – P12 S711 (ON: When disc insert) FIN 7 RIN 9 9 – 12 M STREAM PROCESSOR +5V P11 – P8 M771 (MODE) +3.3V REGULATOR IC303 26 3 4 2 DI1 CLK LAT RESET DO1 DO2 CLKO LATCHO 15 25 14 13 26 16 3 4 2 DI1 DI2 CLK LAT RESET D202, 203 TU 10V FAN MOTOR CONTROL Q190, 191 +10V REGULATOR IC601 10V DO2 25 FAN M12V PARA-DO2 67 S901 (1/2) S901 (2/2) D900 D917 U5V D901 SYSTEM CONTROLLER +5V STOP 90 RESET SWITCH Q901 RESET SIGNAL GENERATOR IC907 D812 STANDBY +5.6V REGULATOR IC905 B+ SWITCH Q990, 991 +2.5V +2.5V REGULATOR IC702 +1.8V +1.8V REGULATOR IC006 (AC IN) TH901 LINE FILTER LF901, 902 RECT D902 VOLTAGE DETECT Q992 VOLTAGE DETECT IC904 AND GATE IC905 LED DRIVE Q911, 912 POWER TRANSFORMER T901 D900 TU-ON 50 SP RELAY 66 POWER +12V REGULATOR IC908 POWER ON/OFF CONTROL Q902, 906 POWER-SW 91 (Page 34) B+ SWITCH Q001, 002 12V SYSTEM CONTROLLER IC901 (3/3) Y B+ SWITCH Q222, 223 PARA-RST 68 RESET 34 M301 (FAN) M +5V REGULATOR IC600 D919 D920 RECT D911 3 D D906 +6.8V REGULATOR Q904 +20V REGULATOR Q905 D933 4 VCC 1 OCP/SYNC D905, 907 S901 (2/2) POWER U5V D3.3V S901 (1/2) POWER ON/OFF CONTROL Q910, 911 DVD-POWER 89 P-PWM 11 ST-POWER 45 36 36 VCC 7-5. +3.3V REGULATOR IC906 BUFFER IC909 OSC Q912, 914 SWITCHING IC902 ISOLATOR PC901 D912 POWER ON/OFF CONTROL Q901, 903 5 FB/OLP POWER CONTROL IC901 HCD-C770/C990 7-6. • Circuit Boards Location NOTE FOR PRINTED WIRING BOARDS AND SCHEMATIC DIAGRAMS Note on Printed Wiring Board: • X : parts extracted from the component side. • Y : parts extracted from the conductor side. f • : internal component. : Pattern from the side which enables seeing. • (The other layers' patterns are not indicated.) Caution: Pattern face side: (Conductor Side) Parts face side: (Component Side) Parts on the pattern face side seen from the pattern face are indicated. Parts on the parts face side seen from the parts face are indicated. • Indication of transistor. C Q These are omitted. B E Q B C E These are omitted. Note on Schematic Diagram: • All capacitors are in µF unless otherwise noted. pF: µµF 50 WV or less are not indicated except for electrolytics and tantalums. • All resistors are in Ω and 1/4 W or less unless otherwise specified. f • : internal component. • 2 : nonflammable resistor. • C : panel designation. Note: The components identified by mark 0 or dotted line with mark 0 are critical for safety. Replace only with part number specified. video board DDCON board SEL board power SW board audio board key board Note: Les composants identifiés par une marque 0 sont critiques pour la sécurité. Ne les remplacer que par une pièce por tant le numéro spécifié. not supplied (power LED board) • A : B+ Line. • Voltages and waveforms are dc with respect to ground under no-signal (detuned) conditions. no mark : DVD PLAY ( ) : CD PLAY [ ] : SACD PLAY • Voltages are taken with a VOM (Input impedance 10 MΩ). Voltage variations may be noted due to normal production tolerances. • Waveforms are taken with a oscilloscope. Voltage variations may be noted due to normal production tolerances. • Circled numbers refer to waveforms. • Signal path. J : CD PLAY c : DVD PLAY I : SACD PLAY f : AUX IN i : OPTICAL DEITAL IN d : TUNER F : AUDIO L : VIDEO E :Y a : CHROMA r : COMPONENT VIDEO • Abbreviation AUS : Australian model CND : Canadian model AMP board FL board power board control board DVD board vol board HP board not supplied (roller motor board) stocker motor board SW (4) board SW (3) board relay board SW (2) board SW (1) board not supplied (sensor board) not supplied (mode motor board) 37 37 RF board HCD-C770/C990 7-7. PRINTED WIRING BOARDS – RF Section – 1 2 3 • See page 37 for Circuit Boards Location. 4 5 6 7 8 10 11 12 13 RF BOARD (CONDUCTOR SIDE) RF BOARD (COMPONENT SIDE) A 9 FLEXIBLE BOARD B OPTICAL PICK-UP BLOCK (DVBU16) E E C 64 D 49 1 48 IC001 A 16 DVD BOARD CN401 E 33 17 32 (Page 42) F 11 11 (11) 1-684-822- 1-684-822- • Semiconductor Location Ref. No. Location D001 D002 C-11 B-11 IC001 D-11 Q001 Q002 B-3 B-3 38 38 (11) HCD-C770/C990 SCHEMATIC DIAGRAM – RF Section – • See page 71 for Waveforms. • See page 76 for IC Block Diagram. RFMON C028 0.1 C025 0.1 R023 820 C027 0.1 C030 C026 0.1 C031 1000p C006 22 10V R026 12k C013 0.1 AGND C029 0.01 RFAC C035 0.1 C024 0.01 JL005 CN002 29P 0.01 AGND AVC R024 0 AVC C022 22p D C023 22p D MIRR MIRR C018 5600p C020 22p CN001 24P C021 22p JL004 PI/CE PI TE TE FE FE C C JL007 RFP RF C009 0.1 GND A5V R025 100 RFP A5V SDEN C019 5600p R022 220 SDEN R027 0 SDEN R028 0 DATA_RF R029 0 CLK_RF DATA_RF DATA_RF VC C017 2200p VCC FLEXIBLE CLK_RF CLK_RF E A A B B C C015 2200p F D C014 2200p LDON LDON E BOARD C016 2200p A3V A RFMON B RFMON C032 0.047 F C033 0.1 JL006 N.C R001 100 (Page 44) INLIM LDSEL C042 180p PD PD C005 22 10V C012 0.1 JL003 CD/DVD/SACD RF AMP, R014 0 VR FD- R032 100 FDFE FD+ TE TD- PI/CE TD+ FD+ FOCUS/TRACKING ERROR AMP R013 0 IC001 CXD1881AR VCC R012 0 TDTD+ SW R011 0 SLB- R018 0 SLB+ SLEDB- LD GND DVD_LD SLEDB+ DVD LD R017 0 C049 0.1 INLIM R016 0 CD_LD CD LD SLASLEDASLA+ JL002 SLEDA+ JL001 SPDL- R015 0 INLIM_3V FD+ SPDL+ FCS+ FDFCSTD+ TRK+ TDTRK- R041 1k R020 0 C008 0.1 C041 0.1 LDON R021 0 330p R033 0 C036 0.47 R034 10M C034 0.1 MIRR R019 0 C037 C039 0.033 F C038 0.033 R035 0 E C040 0.1 PD 7-8. CD_LD R003 33 R004 33 R005 47k C001 100 6.3V R007 33 R006 470 R008 33 R009 47k C003 100 6.3V R010 470 IOP1 IOP2 Q001 2SB1132-T100-QR Q002 2SB1132-T100-QR AUTOMATIC POWER AUTOMATIC POWER CONTROL CONTROL (FOR DVD) (FOR CD) DVD_LD CN003 9P SLB+ SLEDB+ SLB- D001 1SS355TE -17 C002 10 16V C011 1000p L002 47µH L001 47µH SLA+ SLEDA+ C010 1000p D002 1SS355TE -17 C004 10 16V SLEDBSLASLEDALED {LIMIT-SW(A)} GND {LIMIT-SW(B)} INLIM {LIMIT-SW(B)} SPDLSPDL+ The components identified by mark 0 or dotted line with mark 0 are critical for safety. Replace only with part number specified. 39 39 Les composants identifiés par une marque 0 sont critiques pour la sécurité. Ne les remplacer que par une pièce portant le numéro spécifié. HCD-C770/C990 7-9. PRINTED WIRING BOARDS – CHANGER Section – • See page 37 for Circuit Boards Location. 1 2 3 4 5 5 6 7 6 8 5 6 1 A RELAY BOARD SW (4) BOARD STOCKER MOTOR BOARD 2 4 1 4 2 1 3 4 1 4 M B 1-685-011- (11) 1-685-006- 1 11 S716 (STOCKER IN/OUT) 11 (STOCKER) (11) 3 OFF: The moment disc in/out from stocker 2 1 S717 (DISC POSITION) In the midst disc is moving between play position and stocker, ON: disc is play position side, OFF: disc is stocker side 3 2 1 MODE MOTOR BOARD S718 (STOCKING) OFF: In the midst disc is moving between play position and stocker 7 C SW (3) BOARD 3 M 2 1 (DISC OUT) 1-685-010- S715 OFF: When disc out from play position ROTARY ENCODER (STOCKER POSITION) 4 3 G 2 1 11 (11) SW (2) BOARD 1 9 ROTARY ENCODER (MODE) 3 2 (DISC IN (8cm)) 1-685-009- 1 S714 (ON: Play position (8cm disc only)) 11 DVD BOARD CN006 (11) (Page 42) 11 IC701 1 S713 (DISC IN (8/12cm)) (ON: Play position) 9 IC721 2 M E (ROLLER) 3 1 1 11 9 2 1 (DISC INSERT (8/12cm)) (ON: When disc insert) 1-685-008- F • Semiconductor Location Ref. No. Location D701 D711 D721 D-5 E-6 E-5 IC701 IC711 IC721 IC751 D-5 E-5 D-5 F-4 Q731 E-4 (11) ROLLER MOTOR BOARD SW (1) BOARD E 1 2 G 3 4 1-685-005- B D (MODE) 1 IC711 11 (11) SENSOR BOARD 3 1 E K C A 1-685-01211 (11) IC751 DISC INSERT DETECT SENSOR 1-685-004- 40 11 (11) 40 1 1-685-007- (11) 1 HCD-C770/C990 7-10. SCHEMATIC DIAGRAM – CHANGER Section – CNP751 3P DIODE D SENSE GND • See page 76 for IC Block Diagrams. CN702 3P R731 150 DIODE D SENSE R733 10k GND CN701 28P R734 15k IC751 RPR-220 D+5V R732 1k GND M+12V Q731 RT1N141 RIN VCC FIN OUT1 VM OUT2 RNF VREF DISC INSERT DETECT SENSOR MODE MOTOR M+12V MGND LEVEL DRIVE SHIFT MGND P81 D.SENSOR IC701 BA6956AN C754 0.1 C711 10 50V R701 680 D701 MTZJ-T-77-4.7B P41 SW1-B SW2A P42 SW2-A SW2B P43 SW2-B C751 0.1 SW4 P93 SW4 P94 SW5-A SW5A P44 LOD POS CN703 2P MTR RL 1 MTR RL 2 MTR RL 2 MTR RL 1 C781 0.01 P45 LOD NEG RIN GND VCC FIN VM RNF (ROLLER) OUT1 VREF P46 SLD POS OUT2 M781 SW1B C756 0.1 C752 0.1 CNP781 2P P40 SW1-A SW1A C755 0.1 R702 100 P92 SW3 SW3 C758 0.1 P47 SLD NEG ROLLER MOTOR P90 ELV POS (Page 52) DRIVE P91 ELV NEG P95 SW5-B GND RIN VCC FIN VM RNF OUT1 VREF OUT2 SW5B IC711 BA6956AN C753 0.1 STOCKER MOTOR P03 SLD E2 IC721 BA6956AN CNP761 2P M761 CN704 2P MTR ST 2 MTR ST 2 MTR ST 1 MTR ST 1 C761 R722 0.01 100 P96 SLD E0 P02 SLD E1 R712 100 DRIVE P04 SLD E3 C765 0.1 D711 MTZJ-T-77-5.1A R711 680 P82 ELV E0 P83 ELV E1 C764 0.1 P54 ELV E2 C763 0.1 P55 ELV E3 (STOCKER) D721 MTZJ-T-77-3.6A C762 0.1 R721 680 S702 ROTARY ENCODER (STOCKER POSITION) CNP711 3P GND S711 CNP705 3P GND SW1-A SW1-A SW1A SW1-B SW1-B SW1B (DISC INSERT(8/12cm)) (ON:WHEN DISC INSERT) CNP721 3P GND S713 CNP706 3P GND SW2-A SW2-A SW2A SW2-B SW2-B SW2B (DISC IN(8/12cm)) (ON:PLAY POSITION) S714 (DISC IN(8cm)) (ON:PLAY POSITION(8cm DISC ONLY)) S771 ROTARY ENCODER (MODE) CNP731 2P CNP707 2P GND GND SW3 SW3 CN710 7P C769 0.1 SW3 S715 (DISC OUT) C768 0.1 CNP771 7P E1 E1 E2 E2 GND C767 0.1 E3 C766 0.1 E4 GND E3 (ON:WHEN DISC OUT FROM PLAY POSITION) CNP741 4P S716 (STOCKER IN/OUT) CNP708 4P GND GND SW4 SW4 MTR MD 1 MTR MD 2 MTR MD 2 C771 0.01 SW4 SW5-A SW5-A SW5A SW5-B SW5-B SW5B ON:THE MOMENT DISC IN/OUT FROM STOCKER S717 (DISC POSITION) IN THE MIDST DISC IS MOVING BETWEEN PLAY POSITION AND STOCKER, ON:DISC IS PLAY POSITION SIDE, OFF:DISC IS STOCKER SIDE S718 (STOCKING) OFF:IN THE MIDST DISC IS MOVING BETWEEN PLAY POSITION AND STOCKER 41 E4 MTR MD 1 41 M771 (MODE) HCD-C770/C990 7-11. PRINTED WIRING BOARD – DVD Board (Component Side) – • Semiconductor Location Ref. No. 1 2 Location D900 D901 C-2 C-6 IC206 IC301 IC401 IC402 IC605 IC606 IC607 IC612 IC701 IC801 IC813 IC901 IC902 G-9 E-3 G-4 G-2 E-14 E-12 C-13 C-11 G-6 C-8 D-7 C-3 C-6 Q914 C-5 3 • See page 37 for Circuit Boards Location. 4 5 6 B DVD BOARD (COMPONENT SIDE) A 7 RELAY BOARD CN701 8 9 10 11 12 13 14 15 (Page 40) B 132 89 133 88 IC612 IC902 C IC901 IC607 G C IC801 E DDCON BOARD CN814 AMP BOARD CN301 (Page 55) (Page 62) D IC813 176 45 3 1 25 1 24 13 25 25 12 D IC605 AMP BOARD CN305 100 IC606 NC E IC301 36 52 50 44 76 45 51 (Page 55) 48 1 53 1 2 1 37 F 1 44 208 176 75 7 NC IC206 IC701 G 1 H POWER BOARD CN903 IC402 (Page 69) NC IC401 88 133 89 104 132 157 105 156 H I 1-685-086- A RF BOARD CN002 F VIDEO BOARD CN203 (Page 60) (Page 38) 42 42 E AUDIO BOARD CN202 (Page 58) 11 HCD-C770/C990 7-12. PRINTED WIRING BOARD – DVD Board (Conductor Side) – 1 A 2 3 4 • See page 37 for Circuit Boards Location. 5 6 7 8 9 10 11 12 13 14 15 DVD BOARD (CONDUCTOR SIDE) E B E E E E E E IC905 4 3 E 5 IC906 IC900 C IC702 11 E 3 E 2 1 3 1 IC903 1 + IC005 1 1 (C990) E 20 3 D 3 5 IC907 IC808 2 4 1 (US, CND) 4 10 5 4 IC812 3 5 IC904 (EXCEPT AEP) IC604 E 1 IC302 IC303 2 56 E 16 8 9 29 IC004 1 1 3 IC215 1 1 1 8 4 5 IC814 28 1 IC602 IC608 IC600 1 16 8 9 5 5 3 4 IC803 E 3 IC706 IC204 IC601 1 3 IC003 IC610 2 G 1 IC802 2 F 8 4 2 IC202 IC203 3 E 1 2 E IC002 E H 1 IC603 E E 3 IC501 1 2 3 IC703 IC001 3 1 IC006 I 1-685-086(AEP) 2 11 43 43 • Semiconductor Location Ref. No. Location D902 D903 D904 D906 D907 C-13 C-11 C-13 C-12 B-14 IC001 IC002 IC003 IC004 IC005 IC006 IC202 IC203 IC204 IC215 IC302 IC303 IC501 IC600 IC601 IC602 IC603 IC604 IC608 IC610 IC702 IC703 IC706 IC802 IC803 IC808 IC812 IC814 IC900 IC903 IC904 IC906 H-5 H-4 G-4 E-2 D-2 I-6 G-8 G-5 G-7 E-6 D-14 E-8 H-13 F-2 G-3 F-4 H-3 C-4 F-3 G-3 D-6 H-9 F-10 E-12 E-12 C-8 D-10 E-9 C-5 D-12 D-13 C-10 Q001 Q002 Q003 Q004 Q301 Q302 Q900 Q901 Q902 Q903 Q906 Q907 Q908 Q909 Q910 Q911 Q912 Q913 H-2 I-2 H-3 I-3 F-12 G-5 B-13 B-13 B-13 D-11 C-12 D-12 B-6 B-6 B-5 B-14 B-14 B-12 HCD-C770/C990 7-13. SCHEMATIC DIAGRAM – DVD Board (1/10) – • See page 71 for Waveforms. • See page 76 for IC Block Diagram. A5V D5V DGND A3.3V D3.3V AVC (Page 47) (1/10) A5V A3.3V DGND D5V D3.3V AVC (Page 53) M12V MGND SPIN C401 0.1 CN401 29P C514 0.01 SPDL+ GND R533 R534 56k 33k VCC SLEDA AGND RFAC R532 0 JL535 SLEDB+ SLEDB MIRR MIRR JL531 PI JL530 TE JL529 FE R530 R531 56k 0 PI SLEDASDEN DATA_RF JL524 CLK_RF C510 1000p DATA_RF TFDR TRK+ LDON JL522 R524 10k TRKJL501 RFMON R437 47k XLAT DATA MUTE_CD XRST_CD R407 0 R408 0 R410 0 CLOK R409 0 SCLK SENS R405 0 R406 0 WFCK C2PO SCOR R424 0 FCS+ R423 1k TFDR TRDR R425 1k C412 0.0022 FFDR FRDR C413 0.0022 R426 1k DIGITAL SERVO PROCESSOR R429 1k IC401 CXD3068Q R427 0 R431 0 R430 1k R435 0 R523 10k R438 0 FE FD+ JL509 TRK- JL510 TRK+ JL503 SLEDB- R520 10k TD- FE R443 47k SLEDB- R521 100k SLEDB+ SLEDB+ JL505 SLEDA- JL506 SLEDA+ SLEDA- FJMP2 FJMP1 SLEDA+ JL507 SPDL- JL508 SPDL+ R519 100k R416 0 SPDLFCS- TE TE C504 33000p SPDL+ R415 0 R512 56k C506 330p R517 2.2k R442 10k (Page 45) R445 1k PI R450 1k R516 4.7k R510 150k RFAC RFAC C529 0.1 R428 1k C418 0.1 C528 22 16V R554 0 R455 100k SPFG R511 150k MD2 PI C508 1000p R536 200k C503 33000p CDDOUT FFDR TD+ JL504 LRCK R439 330 R441 1k C428 2200p R522 4.7k C426 0.01 R446 10k R448 1k C432 100p (CH12) R447 10k FCS+ R449 33k FCS- JL512 BCLK R436 0 C425 0.0022 LDSEL JL511 FD- C419 0.047 JL500 LDSEL 768FS DIGITAL SIGNAL PROCESSOR, FRDR INLIM R513 56k (Page 39) INLIM R421 1k R432 0 MDAT C509 330p RFMON JL502 C408 0.1 R440 47k C409 0.0022 R527 R525 10k 2.2k TRDR SLED LDON SQSO C407 10 VOLTAGE GENERATOR CLK_RF JL523 SQCK R420 0 SLEDA+ SDEN A3V R417 0 REFERENCE R433 47k A5V JL525 AMP, R528 0 JL527 JL526 R434 47k C414 0.01 FE EXCK SBSO R451 10k MDP TE A5V R413 10k SLEDCTRL C420 0.0022 C406 0.0022 R529 33k C424 0.022 AVC C512 0.01 C416 10 AVC C417 0.1 SLEDBC405 10 16V R412 10k C411 0.1 R535 0 SPDL- AGND JL536 SPC970_BUS R403 0 R411 0 SLEDCTRL RFAC C415 0.01 JL537 R402 0 IC402 NJM3404AV(TE2) R579 8.2k R404 0 IC501 FAN8035 R401 0 C410 10 16V SPINDLE/SLED MOTOR DRIVER (CH3456) GSCOR LOCK WAVRB FOCUS/TRACKING COIL DRIVER, COUT DSP_BUS C519 0.01 JL544 C402 10 R419 68k C404 0.1 MIRR R418 10k FOK R580 33k DFCT R582 R583 10k 10k R581 12k GFS_CD MUTE_2D C526 22 16V SP_ON C527 0.1 TSD-M FL401 C427 0.47 C433 0.0015 R444 470k C421 0.1 R457 3.3k R452 1M C422 100p FL402 C423 0.1 R453 1M C434 10 C436 0.1 C435 0.1 R598 0 R553 0 C525 0.1 ANALOG_BUS 44 44 HCD-C770/C990 7-14. SCHEMATIC DIAGRAM – DVD Board (2/10) – • See page 71 for Waveforms. (2/10) D1 D2 RF_AC JITOFF R545 100k R544 100k TP702 R540 10k C703 0.1 R729 8.2k C715 1500p BUFFER 6 (1/2) R726 100k TP701 COMPARATOR R724 1k R541 100k MDIN 5 8 R727 3.3k 2 1 C718 0.1 C721 0.1 R728 10k C728 0.1 C722 0.1 C723 0.1 D3 GFS_DVD MA8 MA9 XMOE BD9 BD8 BDA BDF R719 1k XCAS D4 BDC R715 10k IC703(1/2) NJM3404AV(TE2) R718 10k R709 68k SPIN 4 BDB R708 1M R747 33k C720 0.1 BDE R707 100 C706 0.1 R714 10k R721 33k BDD C702 10 R711 2.2k R781 0 R720 1k R780 0 C752 0.1 R712 10k C717 0.01 R717 100k FL701 C729 10 C711 0.01 C716 0.47 R716 100 R710 10k C709 0.1 FL706 A5V C714 0.1 C708 0.001 R713 10k R538 100k C521 1500p IC703(2/2) NJM3404AV(TE2) MDP C713 0.1 3 C712 220p 7 R725 1.8k R748 33k (2/2) C523 1500p JIT AVC R772 22 D5 D3V D5V FL703 C780 10 DGND C777 0.1 C778 0.1 FL702 A3V C730 0.1 C779 10 FL704 C781 10 C776 0.1 R771 2.2k MA7 C770 0.1 AGND MA6 C775 0.1 MA5 MDIN MA4 R765 22k R767 47k C772 0.1 C774 0.0047 R764 1M C773 0.47 C771 0.047 R762 22k MA3 MA2 ANALOG_BUS MA1 R763 8.2k MA0 R730 22 RAS R731 22 R770 0 WE GSCOR R759 0 EXCK R758 0 BD6 SBSO R757 0 BD5 SCOR R756 0 WFCK R766 0 BD7 BD4 (Page 46) BD3 BD2 BD1 R755 0 BD0 DVD DECODER BCLK R754 0 C769 0.1 R753 0 C768 0.1 R732 10k IC701 CXD1882R DSP_BUS C742 0.1 MDAT R702 10k R703 10k R752 0 LRCK C766 100p R735 10k R704 10k R799 0 R737 10k R776 0 R705 10k C765 0.1 SPC970_BUS C743 0.1 C744 0.1 C745 0.1 XSRQ R750 10k R706 10k D0 R741 22 XSHD D1 R742 22 XDCK D2 XSAK D3 D4 R743 22 SD0 SD1 SD2 SD3 SD4 SD5 R744 22 SDEF SD6 SD7 XINIT0 R745 47k XINIT1 XHRD XHWR XCS1882 A7 A6 A4 A5 A2 A3 A1 D7 A0 D5 D6 R777 0 D6 D7 R746 47k C760 0.1 C763 0.1 C764 0.1 C762 0.1 C761 0.1 (Page 47) 45 45 E6 E7 E5 E4 E3 E1 D8 E2 (Page 44) C741 0.1 C767 0.1 R778 100k C2PO C740 0.1 HCD-C770/C990 7-15. SCHEMATIC DIAGRAM – DVD Board (3/10) – • See page 71 for Waveforms. • See page 76 for IC Block Diagrams. (3/10) D1 DGND D3V DGND RF_AC C870 33000p WAVRB R804 0 D3V AGND D3V D2 FL811 R803 100 WPK D3 WRF SL812 C871 0.01 R844 0 R845 0 R846 0 R834 0 R833 0 R835 0 R836 0 R837 0 R838 0 DQ7 DQ6 MA3 MA2 DSLS IFRM IEMPTY VDIOB0 IBCK IOUTE VSCB1 IERR IANCI IPLAN IHOLD VDCB1 IVLD IDIN0 IDIN1 IDIN2 IDIN3 IDIN4 IDIN5 VSIOB1 IDIN7 WAD1 WAD0 VDIOB1 TESTI WAD2 WAD3 WAD4 VSCB2 WAD7 WAD6 WAD5 VDCB2 WCK WRFD WAVDD0 WARFI DQ5 WAVDD1 DQ5 WAVRB WAVSS0 C726 0.1 VSIOA2 DQ6 C725 0.1 WAVSS1 SDATALS DQ7 MA1 MA10 MA11 MA0 RAS WE BD7 BD6 BD5 BD4 R840 0 R843 0 WPK IC706 MSM51V18165F60TSKR1 R841 0 A4 VDD A3 A2 A1 A0 A10 A11 RAS WE N.C. N.C. N.C. I/O7 I/O4 VDD VDD BD3 BD2 BD1 BD0 C724 0.1 C866 0.01 R852 0 16Mbit D-RAM WRF C727 10 C865 0.01 R842 10k R805 10k D5 FL705 C867 0.01 SL811 GND A6 A7 A5 A9 A8 OE UCAS N.C. LCAS N.C. I/O9 I/O8 I/O6 I/O11 I/O10 I/O5 I/O12 I/O3 GND I/O13 I/O2 I/O14 I/O1 GND I/O15 I/O0 SL813 C815 0.01 IDIN6 MA6 MA5 MA4 MA9 MA8 MA7 XCAS XMOE BD9 BD8 BDA BDB BDC BDF BDD BDE D4 DSRS SDATARS R851 0 DSL SDATAL DSR IFULL SDATAR DQ4 DSC IANCO DQ4 SDATAC DSLF C842 0.01 SDATALF IOUT5 DQ3 SA4 SA5 SA6 SA8 SA9 DCKE SA7 DQ3 DCLK R882 10k R883 10k R884 10k R885 10k R886 10k R887 10k R888 10k R889 10k VSIOB0 VDIOA2 C849 0.01 DQ2 DQ2 IOUT4 DQ1 VDCB0 DQ0 IOUT3 DQ1 DQ0 +2.5V REGULATOR IOUT2 DCLK VSCB0 VSS A4 A5 A6 A7 A8 A9 NC CKE CLK UDQM IOUT1 DCKE SWE XWE IOUT0 XCAS VDDSD1 VDD A3 A2 A1 A0 A10/AP A11-BA CS RAS CAS C837 0.01 SRAS DSRS DSARS XRAS VDIOA3 ZDFRS NC DSALS SA11 C797 220 4V A11 ZDFLS A10 VSDSD1 VSCA3 DSALFE A9 ZDFLFE A8 DSAC VDCA3 ZDFC SA3 SA2 SA1 SA0 SA10 SA9 SA8 FL810 C840 10 C843 0.01 C854 0.01 C804 0.01 SA7 A7 R850 22 (Page 50) C811 0.01 A5 ZDFR A4 DSAL VSIOA4 ZDFL SA3 A3 PHREFO A2 PHREFI A1 BCKAO A0 BCKAI SA2 SD7 XSAK SDEF SD6 AV7 XSHD XSAK SD5 AV6 XDCK XSHD SD4 AV5 SDCK SD3 AV4 SD2 AV3 SA1 C819 0.01 R849 22 DSC C855 0.01 R848 22 DSAR IC801 CXD2752R A6 SDEF C861 0.01 DSR SA4 IC812 SN74LV245APWR C812 0.01 DSLS VDDSD0 DSD DECODER SA6 SA5 IC813 SN74LV245APWR R826 22 DSLF SA11 SRAS SCAS SWE DQ7 DQ6 DQ5 DQ4 DQ3 DQ2 DQ1 SA10 DQ0 (Page 45) C857 0.01 SCAS WE DQ8 VDDQ VDDQ DQ7 DQ6 LDQM NC/RFU DQ9 VSSQ VSSQ DQ11 VDDQ DQ10 DQ5 DQ4 VDDQ VSSQ DQ12 DQ13 DQ3 DQ2 DQ1 IC808 MSM56V16160F-8TK 7R1 VDD OUT VSSQ 16Mbit SD-RAM G DQ14 DQ15 VSS DCKE IN C796 0.1 VSIOA3 DCLK IC702 TA48M025F(TE16L) DQ0 C795 100 6.3V R821 22 DSL R822 22 DSBC R823 22 DSMCK CDDOUT SA0 R830 4.7k VDIOA4 VSDSD0 XSRQ BCKASL XSHD NC SDCK NC XSAK VDCA2 XSHD SD1 AV2 SDCK SD0 AV1 XSAK AV0 SDEF NC SDEF AV0 R867 0 C856 0.01 R866 0 TEST5 SD0 AV1 TEST4 SD1 AV2 SACD/DVD SELECT AV5 SD4 SUPEN SD5 SUPDT7 SD6 SUPDT6 SUPDT5 SUPDT4 VSIOA1 SUPDT3 SUPDT2 SUPDT1 SUPDT0 XBIT TEST3 UBIT VDCA1 TEST2 TEST1 TRST TMS TDO VSCA1 TDI TCK MNT7 MNT6 MNT5 MNT4 MNT3 MNT2 MNT1 MNT0 F75HZ VDIOA0 EXCKO2 VDIOA1 LRCK EXCKO1 VSIOA0 A MCKI VCC SMUTE B XRST ST MSREADY AV7 XMSLAT Y VSCA0 SL XMSDOE GND SD7 C848 0.01 R865 0 AV6 Y C803 0.01 FL812 R829 100 C813 0.01 TRST C810 0.01 SHRMUT XRST_DSD SHRRDY XMSLAT C807 0.01 R827 100 MSDATO C808 100p D7 MSDATI D6 MSCK C841 10 IC814 TC7WH157FK AV4 MSDATI XSRQ C802 10 VSCA2 MSDATO R847 22 NC SD3 VDCA0 FL807 SD2 AV3 LEVEL SHIFT MSCK LEVEL SHIFT TMS R831 33k TDOSA TDISA TCK (Page 48) R828 4.7k C817 0.01 C818 0.01 R800 4.7k D8 F7 F6 F4 F3 F2 F1 768FS (Page 47) 46 46 C839 0.01 C838 0.01 CDDOUT R839 4.7k HCD-C770/C990 7-16. SCHEMATIC DIAGRAM – DVD Board (4/10) – • See page 71 for Waveforms. • See page 76 for IC Block Diagrams. F6 F7 F3 F4 F1 F2 (Page 46) (4/10) E7 E5 E6 C320 0.01 C301 10 10V C303 0.01 C302 0.01 R305 10k XSRQ_ZIVA FL301 XRST_DSD JIG_MOD DRVCLK DRVRDY I2C_SIO CS_SPC 27M I2C_SCL RXD TXD R308 22 XHWR CLK_RF R307 22 XHRD DATA_RF R304 22 R306 22 A0 A1 A2 A3 A5 A4 A6 A7 DSAVE XRST_CD XRST_DVD SDEN A2 A1 A0 VCC WP IC302 BR24C02F-WE2 SCL EEPROM SDA GND ZIVA_BUS LDSEL (Page 48) SWITCHING IC802 TC7S32FU(TE85R) Q301 DTC114EKA -T146 VCC LASER DIODE SELECT GND R303 22 R312 10k (Page 45) E2 LDSEL FLIP-FLOP R738 22 E1 IC803 TC7W74FK(TE85L) LOCK R352 0 FOK R351 0 R309 MD2 0 TSD-M TSD-M SCLK R350 100 R311 22 GFS_CD R349 0 FL304 R313 0 FJMP2 R314 0 SENS R315 0 C309 C310 100p 100p C311 0.01 IC303 IMIC6007BT-D R346 1k R345 0 R344 1k CLOCK PI VDD1 NC TE VSS1 NC JIT XCS1882 E4 SP_ON R342 0 MECHANISM D0 CONTROLLER D1 IC301 CXP973064-220R C308 MO1 CL301 R355 22 NC 33000p SLED R340 0 NC MUTE_2D R339 0 MUTE_CD D3 D4 GFS_DVD R338 0 D5 R332 10k D6 R333 10k D7 XINIT0 C317 15p X302 27MHz R362 390 R354 1M GENERATOR R356 68 SO3 VDD2 VDD3 VSS2 VSS3 C318 12p D2 R361 10k FE XTI SO2 XTO SO1 CL304 R357 68 CL303 E3 FJMP1 R358 68 CL302 R316 10k C312 10 10V SPFG R363 10k R341 0 R337 100 C316 10 16V SQCK SHRMUT XINIT1 MSCK R336 0 R335 22 C313 0.1 SQSO XMSLAT L301 10µH FL303 CN301 7P RFMON JL301 RF_AC JL302 RF C307 0.01 RF_AC JL303 GND TXD JL304 RXD JL305 R329 100 R330 100 R326 100 R327 100 R328 100 MSDATO DGND MSDATI C304 0.01 R323 100 R322 0 R321 100 R320 0 R319 0 R317 100 AVC AVC R318 100 TXD RST_SPC R331 220 D3V DGND JL307 3V-D R353 10k D5V (Page 44) R360 10k CLOK DATA SHRRDY JITOFF SLEDB X301 20MHz SLEDA DRVIRQ DRVCLK DRVTX DRVRX CS_SPC INLIM COUT MIRR LDON XLAT C791 100 6.3V SCOR D5V C793 220 4V RXD JL306 R364 4.7k R324 0 D3.3V C809 0.01 DGND A3V A3.3V A5V A5V AGND 47 47 R359 10k (FOR CHECK) HCD-C770/C990 7-17. SCHEMATIC DIAGRAM – DVD Board (5/10) – • See page 71 for Waveforms. • See page 76 for IC Block Diagram. DA05V DGND (Page 53) (5/10) VS I/P-SW R234 75 R261 0 R210 75 R266 75 R260 0 CR/B R265 75 R259 0 R209 75 R264 75 CB/R FB004 R258 0 R015 0 TP025 CB/R Y R263 75 TP024 GND C R208 75 CR/B R257 0 R013 0 CR R262 75 SPDIF R064 0 TP023 I/P SW R207 75 V I/P-SW TP076 I2C_CTRL TP077 NC CB D5V C201 220 4V C225 0.1 FB202 C229 0.01 R236 1k C230 0.01 C231 0.01 C232 0.01 C233 0.01 D5V GND TP026 R036 0 Y (Page 61) TP027 R039 0 C TP028 R041 0 V TP029 R043 0 VS R203 180 R232 0 VIDEOY R206 0 G1 R249 R250 4.7k 4.7k VIDEOC FB201 GND R245 4.7k C236 0.01 C235 0.01 C237 0.01 G2 G3 GND R238 100 VIDEOV R246 4.7k VS/WIDE CN003 14P (Page 50) SPDIF SPDIF (Page 52) 27M ZIVARESET I2C_SCL R253 4.7k C240 0.01 R252 4.7k I2C_SIO I2C_CTRL I2C_CTRL MD31 I2C_SCL ZIVA_BUS R233 10k CS_SPC CN201 4P (Page 47) MD30 I2C_SIO MD29 MD28 C241 0.01 RXD MDQM3 TXD (FOR CHECK) R248 4.7k GND MD27 D5V MD26 C228 0.01 SD7 MD25 SD6 MD24 MD23 SD5 R239 47k MD22 SD4 MD21 R202 0 MD20 SD3 C246 0.01 SD2 C247 0.01 MDQM2 SD1 MD19 SD0 Q302 DTC114EKA -T146 INVERTER XSRQ_ZIVA MD18 XSAK MD17 MD16 EEPROM IC203 BR9040F C251 0.01 SDEF MD15 XDCK DVD SYSTEM PROCESSOR R/ B VCC C255 0.01 DRVIRQ WC GND DRVCLK CS DO DRVTX SK DI DRVRX R226 4.7k MD14 IC206 ZIVA-5P-B0 MD13 MD12 C252 0.01 MDQM1 DRVRDY (Page 49) R247 4.7k ALE MD11 RST_SPC MD10 MD9 MD8 C264 10 C243 0.01 C250 0.01 C259 0.01 MD7 C203 0.01 MD6 MD5 TRST CL201 TDISA CL202 TDOSA CL203 TMS CL204 TCK CL205 MD4 MD3 MD2 SYS_RST CL206 R235 0 C260 0.01 MDQM0 MD1 TDOSA TDOSA MD0 R243 10k MCLK TRST C261 0.01 TRST TDISA TDISA HA3 R229 33 HA2 R230 33 R212 22 R242 10k C262 0.01 MWE TMS (Page 46) TMS TCK TCK R241 10k A3.3V DGND D5V FL204 CL803 R225 33 MRAS R228 33 MCAS BA0 BA1 MCSO MA10 R227 33 MA11 R224 33 MA0 MA1 R223 33 MA2 R222 33 R219 33 R221 33 MA3 MA5 MA4 R220 33 R218 33 MA7 R217 33 MA8 MA6 R215 33 R216 33 MA9 R/W UDS HAD0 HAD2 HAD1 HAD3 HAD4 HAD5 HAD6 HAD8 HAD9 HAD7 HAD10 HAD11 HAD12 HAD13 HAD14 HAD15 +1.8V HA1 (Page 53) R231 33 D3.3V G4 G5 C265 0.01 C266 0.01 C267 0.01 R256 4.7k R244 4.7k C271 0.01 C268 0.01 C269 0.01 C270 0.01 JIG_MOD G6 G7 48 48 HCD-C770/C990 7-18. SCHEMATIC DIAGRAM – DVD Board (6/10) – • See page 76 for IC Block Diagram. (6/10) G1 G2 CL801 128Mbit SD-RAM C253 0.01 IC202 MT48LC4M32B2-7 C254 10 C257 10 C217 0.01 C258 0.01 G3 C219 0.01 MD0 MD15 MD1 MD14 MD2 MD13 FL202 C234 0.01 MD3 MD12 MD4 MD11 MD5 MD10 MD6 MD9 MD7 MD8 C226 0.01 FL203 C238 0.01 16Mbit PROGRAMMABLE IC204 MR27V1602ETP C239 0.01 UDS HA21 WE N.C. A18 A19 A17 A8 A7 A9 A6 A10 A5 A11 A4 A12 A3 A13 A2 A14 A1 A15 HA19 MDQM0 HA20 MDQM1 HA18 HA9 MWE HA8 HA10 MCAS HA7 MRAS MCLK MCSO R251 10k HA11 HA6 HA12 HA5 HA13 MA11 MA9 BA0 MA8 BA1 MA7 MA10 MA6 MA0 MA5 A0 A16 MA1 MA4 CE BYTE HA4 HA14 HA3 HA15 HA2 HA16 HA1 MA2 HA17 MA3 VSS VSS R/W C242 0.01 MDQM2 HAD15 DQ15 OE MDQM3 HAD0 HAD7 DQ0 DQ7 DQ8 DQ14 HAD8 HAD14 HAD1 MD16 MD31 C244 0.01 HAD6 DQ1 DQ6 DQ9 DQ13 HAD9 HAD13 HAD2 (Page 48) MD17 MD30 MD18 MD29 MD19 MD28 MD20 MD27 MD21 MD26 MD22 MD25 MD23 MD24 HAD5 DQ5 DQ2 HAD10 C245 0.01 HAD12 DQ12 DQ10 HAD3 HAD4 DQ3 DQ4 DQ11 VCC HAD11 C248 0.01 G5 ALE HA3 HA2 HA1 HAD14 HAD15 HAD13 HAD12 HAD11 HAD9 HAD10 HAD7 HAD8 HAD6 HAD4 C315 0.01 HAD5 HAD2 G4 HAD1 ALE C314 0.01 HAD0 C274 0.01 HAD3 C249 0.01 C204 0.01 C319 33p BUS INTERFACE C356 0.01 49 HA21 HA20 HA19 HA18 HA17 HA15 HA16 HA14 HA13 HA12 HA11 C355 0.01 G7 49 HA10 HA8 HA9 HA7 HA6 HA5 G6 HA4 IC215 SN74ALVCH16841 DGGR HCD-C770/C990 7-19. SCHEMATIC DIAGRAM – DVD Board (7/10) – • See page 71 for Waveforms. • See page 76 for IC Block Diagrams. (7/10) R600 100 Z2 Z3 (Page 52) PLOCK Z4 Z1 XST C608 0.1 DIN DIN C604 56p DOUT R687 1k SPDIF V16 V14 V15 V13 V12 V9 DGND C635 0.01 V11 V8 V6 V7 V5 C627 0.01 V3 C616 0.1 V4 R614 33k V1 C626 0.01 V10 R606 100 C611 0.01 V2 R608 3.3k DOUT R607 100 R603 100 R602 1M R605 100 X600 12.288MHz R604 100 C603 22p R611 100 CKOUT(O) VF(O) R(I) DVDD DVDD DIGITAL AUDIO R623 100 A11 NC A12 NC A13 A10 A9 A8 A14 WE A15 NC D9 D8 D6 D7 D11 D10 VDD VSS D5 VSS VDD D4 D12 D3 D13 D2 BLE D14 D15 D1 BHE A0 D0 V17 V20 V18 V19 V21 V22 V23 V24 V25 V26 V27 V28 DA03V PM XMODE(I) CKSEL1(I) CKSEL0(I) DOSEL1(I) DOSEL0(I) DVDD MODE1(I) DGND CL(I) CE(I) MODE0(I) XSEL(I) DGND C652 220 4V DISEL(I) V29 SPDIF(O) V30 DO(O) DIGDI V31 R629 100 DOUT V32 V34 SPDIF DIN0(I) DI(I) CS DIN DIN1(I) ERROR(O) R628 100 R631 100 A7 DIN2(I) IC606 LC89056W BPSYNC(O) OE C637 0.01 DGND INTERFACE R625 3.3k DO IC604 IS61LV6416-15EL10(ISSI) R616 5.6k V33 DGND LOCK(O) ERR A5 VIN(I) F2(O) C636 0.1 S-RAM R615 4.7k A1 LPF(O) A2 AVDD F1(O) A3 F0(O) A6 (Page 48) AGND A4 BCK(O) LRCK(O) DATA(O) DVDD DGND XSTATE(O) XMCK(O) XOUT(O) EMPHA(O) CSFLAG(O) XIN(I) SPDIF AUDIO-(O) C617 0.1 C613 10 FL605 C634 0.1 C640 0.01 C642 0.01 V3 V13 V1 V2 V34 V33 V23 V22 V24 V26 V25 V28 V27 V29 V32 V31 V30 R634 1k RSTDIR L602 10µH C641 0.01 R642 100 R640 100 CSDIR DIGCLK R639 100 SLR C609 0.1 0.01 (Page 53) C639 0.1 C612 10 C646 C638 0.1 C648 0.1 G O C647 0.01 C661 0.01 EXD1 B1 C653 0.01 BCK SLR LRCK +2.6V REGULATOR R637 100 V15 R677 220 R676 220 R674 220 R675 220 CW LR R672 100 R673 220 256FS Z3 R661 100 C644 0.01 RSTDSP C668 0.01 Z2 Z4 C671 0.01 Z1 FL606 0 I IC605 NJM2391DL1 -26(TE1) V16 C650 0.01 V17 V14 X601 13.5MHz R645 10k V12 V11 SCK R648 100 V10 R689 10k V9 LRCK FL604 CDDOUT FL603 V8 DIGITAL AUDIO DSMCK BCK R956 10k DSBC R700 10k V7 SIGNAL PROCESSOR IC607 CXD9617R LR SDATAL LRCKO R655 100 SDATAR BCKO R658 100 V6 V5 C674 10 SDATAC SDATALF 256FS R659 33 SDATALS D1 R662 100 SDATARS D2 R664 100 D3 R666 100 D4 R667 100 C667 10 DIGITAL AUDIO C673 0.01 C643 220 4V R663 100 R682 10k V20 IC612 CXD9633Q R684 10k V18 V19 PROCESSOR LRCKI BCKI (Page 52) C651 0.01 R686 10k CW R688 10k 2FS/EX R692 100 SYNC R695 100 R671 100 INIT R998 10k C679 0.01 C660 0.01 GP9 C669 0.01 C672 0.01 ERR C670 0.01 BST HCS DSPDO HACN R919 10k DIGDI R962 10k R960 10k R961 10k R972 10k C676 0.01 DIGCLK R680 100 R679 100 V4 C675 0.01 V21 R699 100 C677 0.01 B2 B3 A2 B4 A1 (Page 46) (Page 51) 50 50 HCD-C770/C990 7-20. SCHEMATIC DIAGRAM – DVD Board (8/10) – • See page 71 for Waveform. (Page 53) A1 A2 D5V (Page 50) (8/10) C1 CN900 8P Y4 AMPCLK AMPDATA CQRST I2CDATA I2CCLK DIGDI DDSPDO DIGCLK P-PWM PM RSTDSP HCS BST DHACN DGP9 DERR DPLOCK D903 1SS355 CSDIR MUTEG R955 10k DXST CS1 MUTEN CS2 AMPRST R957 10k INVERTER RSTDIR Q903 2SC2712-GL -TE85L DO JW903 0 R907 3.3k R918 820 R917 820 Y1 IN RESET R910 100 JW900 100 TP901 R916 100 TP902 R914 100 R915 100 C901 0.01 (NC) R912 100 R959 1k R908 10k Y4 2PIN R909 10k Y3 CLK R911 100 OUT R913 100 Y2 R906 3.3k VPP I/P-SEL Y2 Y3 GND Y1 VDD CS3 (Page 52) I2H LT RSTAD (Page 52) SYNC 2FS/EX AV1 AV0 R922 10k X901 20MHz RDSC DGND C2 6.5V C3 SIRCS R971 10k (Page 53) PSW C4 CN005 19P SYSTEM CONTROLLER R929 15k TP050 6.5V DRST DGND TP051 R069 0 EB ENB TP052 R068 0 EA TP053 R065 0 K1 TP054 R063 0 K0 TP055 R058 0 K2 TP056 R055 0 FDATA TP057 R053 0 FCS TP058 R070 0 SIRCS TP059 R052 0 FCLK R047 0 DIMM R948 10k C5 IC901 mPD703033BYGF -M01-3BA FB005 R932 10k DVDPW RDSD OCP STPOW EB R937 10k C921 100p EA R939 10k C908 100p K2 ∗ R685 1k ∗ R935 4.7k (C990) R933 10k R935 10k (C770:US,CND) C6 ENA R899 2.2k KEY1 KEY0 KEY2 AV2 R993 1k R941 3.3k C905 330p K1 R942 3.3k C906 330p K0 R943 3.3k C907 0.001 FDATA FCS FM R946 10k C7 R944 10k SIRCS FCLK (Page 63) R969 330 DIMM DGND FB006 TP061 R057 0 TP062 R056 0 TP074 R061 0 LCS TP075 R062 0 LCLR Q900 DTA114EKA -T146 R991 10k (C990) MUTING R963 ∗ (US,CND,AUS) IODATAI IOCLK ∗ R963 IOLAT1 RELAY INIT HPSW LCLR LCS FCS FDATA FCLK DIMM TUCLK TUDO TCE CONTROL ST-LED TUDI STANBY-SW TUN MUTING FMUTE Q902 DTA114EKA -T146 IORST LCLR PARA-DO2 LCS R936 1k R967 100 POWER-SW R926 100 CONTROL STBY-LED R968 100 TP060 5V AUMUTE DGND 4.7k (US,CND) 2.2k (AUS) ∗ R981 1.5k (AUS) 4.7k (EXCEPT AUS) 5V (Page 52) R965 10k C913 0.01 C914 0.01 R951 10k R981 ∗ R970 10k D-SEN R979 47k DISC SIRCS LOADING DETECT R984 47k DISC INSERT C917 0.1 C918 100p R977 22k DETECT R983 47k D906 1SS355 KEY INPUT DETECT IC903 PST9126NL IN GND OUT DETECT GND SIRCS Q914 2SC2712-GL -TE85L WAKE UP R978 1k Q906 2SC2712-GL -TE85L NC Q913 2SA1037AK R985 470k IC904 PST9140NL (Page 52) IN Q907 2SC2712-GL -TE85L GND OUT C923 0.1 D904 1SS355 GND R980 47k NC R989 0 DETECT K0 C922 0.1 K2 SEN1C R987 47k R986 47k R988 0 U5V KEY INPUT DETECT 51 51 HCD-C770/C990 • See page 76 for IC Block Diagrams. (Page 53) DA05V (Page 53) B1 B2 B3 B4 (Page 50) 12V 7-21. SCHEMATIC DIAGRAM – DVD Board (9/10) – • See page 71 for Waveforms. CN001 12P DGND (9/10) SCK R026 0 TP030 SCK DGND LRCKO R028 0 TP031 BCKO R029 0 TP032 D3 R031 0 TP033 D2 R032 0 TP034 D1 R034 0 TP035 C1 LRCKO (Page 56) BCKO R657 1k D3 R626 1k R610 2.2k R609 470 D2 +5V REGULATOR L600 10µH O R669 1k +10V REGULATOR IC600 NJM78M05DL1A -TE1 I O G I G R636 4.7k C658 470p R647 220 R649 4.7k R696 220 R635 10k C645 220p DGND FB003 TP036 6.5V 6.5V C618 10 16V C620 0.1 A/D CONVERTER C615 0.1 VCC R646 4.7k C678 220p R652 4.7k R618 4.7k IC610 NJM2904V(TE2) R619 47k DGND DIN C552 0.1 D4 C623 10p R651 10k C655 C657 100 0.1 6.3V BCKO C656 0.1 C654 100 16V SCK (Page 50) (AEP) CN002 29P R630 470 R627 2.2k RDSD R024 0 TP001 RDSC R022 0 TP002 RDATA RCLK LRCKO R621 100 LT BCKI R622 100 DIGCLK LRCKI R624 100 C632 0.01 TUDO R668 1k RSTAD EXD1 IC602 (Page 51) IC603 NJM2904V(TE2) LOW-PASS GND IC608 AK4382AVT-E2 R620 100 C630 C631 10 0.1 VCC FILTER C622 10 16V C625 10 16V I/P-SEL FILTER D/A CONVERTER C629 470p 6.5V LOW-PASS R644 10k C619 0.1 C621 470p (Page 53) 0.1 GND C633 C601 0.1 C628 10 16V C600 0.1 C624 0.1 C602 100 16V R612 47k C605 0.1 R613 4.7k C607 0.1 C614 10 16V C606 100 6.3V C610 47 6.3V (Page 51) D1 DGND IC601 µPC2910T-E1 R660 220 R650 4.7k TP003 TUNDO C662 220p TUDI R002 0 TP004 TUN R003 0 TP005 TCE R004 0 TP006 TUCLK R005 0 TP007 TUNDIN TUNSTE C663 470p R654 220 C659 220p DIGDI TUNCE TUNCLK R665 10k R653 4.7k PCM1800 R006 0 TP008 R007 0 TP009 D.GND D.IN R617 0 R656 0 D.DND FB902 C2 TP010 FB901 D.OUT C925 0.1 C3 R931 1k D.GND R054 0 TP011 I/P-SEL P-PWM TP012 C4 NC AV0 R014 0 TP013 AV1 R016 0 TP014 AV2 R018 0 TP015 AUMUTE R020 0 TP016 FM R001 0 TP017 AV0 C5 C900 0.1 C6 AV1 C902 0.1 AV2 (ROTARY ENCODER) IC902 PT8300 IC906 PT8300 R974 R921 0 100 IODATAI IORST U5V IOCLK CHANGER CONTROLLER (MOTOR SWITCH) D-SEN R920 100 R928 0 IOLAT1 R071 0 R076 0 MA1 MEN10 SEN2 MA2 MEN11 DGND ENABLE SWITCH IORST SEN1 (Page 59) TU-ON Q908-910 SEN1C (Page 51) AUMUTE ERR C924 0.1 CHANGER CONTROLLER R025 0 TP018 R027 0 TP019 R030 0 TP020 R033 0 TP021 FB001 TP022 L PARA-DO2 C7 A.GND Q908 DTC124EKA -T146 R A.GND R992 10k R924 100 R.IN A.GND Q909 DTC124EKA -T146 L.IN 2FS/EX Q910 DTC124EKA -T146 SEN3 MB1 MEN12 SEN4 MB2 MEN13 SEN5 MC1 MEN20 SEN6 MC2 MEN21 AMPRST R035 0 TP037 MEN22 MUTEG R037 0 TP038 MEN23 MUTEN R038 0 TP039 AMPDATA R040 0 TP040 AMPCLK R042 0 TP041 DGP9 CS1 R044 0 TP042 HACN CS2 R045 0 TP043 CS3 R046 0 TP044 DRST R048 0 TP045 OCP R049 0 TP046 HPSW R050 0 TP047 10V 10V CN004 17P MGND INIT SEN7 M12V PGMUTE SEN8 (Page 53) R930 10k CN006 28P RB901 10k TP078 D+5V NSMUTE LEVEL SHIFT R954 10k RB902 10k IC900 TC74HCT7007AF DGND SCDT XST TP079 M+12V SHIFT R925 100 DXST R927 100 ERR R953 100 DERR GP9 R900 100 M+12V DGND TP080 R901 100 MGND LAT1 MGND LAT2 TP081 PLOCK R902 100 R903 100 DHACN DPLOCK R904 100 DSPDO D.SENSOR LAT3 TP082 R012 0 SEN7 TP083 R074 0 SEN1 TP084 R073 0 SEN2 SW3 DGND DDSPDO SW1-A EN D901 1SR154 R905 100 SW1-B TP085 SEN3 TP086 SEN4 TP087 SEN5 TP088 SEN6 TP089 MA1 TP090 MA2 DIAG SW2-A R945 10k SW5-A R990 15k R949 10k R940 100 LOD-POS C909 0.22 LOD-NEG TP091 MB1 TP092 MB2 TP093 MC1 TP094 MC2 TP095 SEN8 TP096 MEN10 TP097 MEN11 TP098 MEN12 TP099 MEN13 TP100 MEN20 TP101 MEN21 TP102 MEN22 TP103 MEN23 RELAY FMUTE R075 0 TP049 HPMUTE AND GATE SLD-POS R999 1.5k R950 47k SLD-NEG DGND PSW SW4 STPOW D900 1SR154 SW2-B IC905 TC7S08F RESET RELAY Q911,912 GND RELAY LED DRIVE STPOW STPOW ELV-POS SW5-B Q901 2SD1819A-QRS -TX SLD-E1 SLD-E2 R964 47k RESET SWITCH D902 1SS355 SLD-E3 GENERATOR IC907 PST9140NL NC SLD-E0 GND RESET SIGNAL D907 1SS355 GND RESET IN ELV-NEG DVDPW R938 10k Q912 2SC2712-GL -TE85L VCC DVDPW POWER-AD (Page 53) AGND C926 0.1 C903 100 6.3V C927 0.1 C912 47 6.3V C910 0.22F 5.5V Q911 DTC124EK C911 47 6.3V I2CDATA R934 10k I2C_SIO R966 220 CQRST ZIVARESET I2CCLK ELV-E0 I2C_SCL I2H ELV-E1 ELV-E3 E5.6V ST-LED STANBY-SW I2C_CTRL ELV-E2 5V (Page 41) (Page 56) HPSW (Page 53) (Page 51) 52 52 (Page 48) HCD-C770/C990 7-22. SCHEMATIC DIAGRAM – DVD Board (10/10) – (10/10) 6.5V (Page 51) DGND +5V REGULATOR IC004 µPC2905T-E1 O DA05V I G (Page 52) DA05V (Page 48) DGND +3.3V REGULATOR +1.8V REGULATOR IC005 µPC2933T-E2 IC006 µPC2918T-E1 O DA03V (Page 50) I O G I G DGND C017 0.1 C016 0.1 C015 0.1 C014 0.1 C018 0.1 C020 220 4V C019 0.1 D5V (Page 51) +5V REGULATOR IC003 µPC2905T-E1 +1.8V O D5V (Page 48) I G D3.3V C012 0.1 C013 0.1 DGND A3.3V FB008 FL003 FB007 6.5V (Page 52) FB010 FL004 FB009 E5.6V (Page 52) 12V C005 220 4V (Page 52) C006 47 16V M12V Q002 2SB906(TE16L) D3.3V A5V Q004 2SB906(TE16L) +3.3V REGULATOR +5V REGULATOR IC001 µPC2933T-E2 IC002 µPC2905T-E1 O A3.3V I O R067 470 Q003,004 R066 1k R079 1k R011 1k R009 1k Q001,002 B+ SWITCH FB012 FL005 FB011 I TP064 G G TP065 (Page 44) FB014 C008 0.1 C001 100 6.3V C010 0.1 C011 0.1 Q003 DTC124EKA -T146 Q001 DTC124EKA -T146 C003 100 6.3V FL006 CN008 13P TP063 B+ SWITCH FB013 TP066 C004 47 16V R017 0 TP067 R019 2.2k TP068 R021 0 TP069 R023 0 TP070 TP071 MGND TP072 12V 6.5V DVD3.3V E5.6V RESET P.CONT1 P.CONT2 A/D MGND DGND DGND R060 0 MGND R059 0 M12V R051 0 C007 10p TP073 TP048 DGND AGND 53 53 AGND RELAY POWER-AD RESET STPOW DVDPW P.CONT3 (Page 52) (Page 52) (Page 70) HCD-C770/C990 7-23. PRINTED WIRING BOARD – AMP Section (1/2) – 1 • Semiconductor Location Ref. No. Location D101 D102 D103 D104 D105 D106 D180 D181 D190 D191 D192 D331 D332 D333 D334 D335 D336 D341 D342 D343 D344 D345 D346 D361 D362 D363 D364 D365 D366 K-6 K-6 K-6 J-6 J-6 J-6 D-2 D-2 H-9 H-9 E-2 E-10 E-8 E-7 E-6 E-4 E-3 H-9 H-8 H-6 H-5 H-4 H-3 G-9 G-7 G-6 G-5 G-3 G-2 IC300 IC303 IC305 IC308 IC310 C-9 B-9 D-8 D-5 D-3 Q101 Q102 Q103 Q104 Q105 Q106 Q107 Q108 Q109 Q110 Q111 Q112 Q113 Q114 Q191 Q192 K-8 K-8 K-8 K-7 K-7 K-7 J-8 J-7 K-7 K-7 J-7 J-7 K-8 K-6 B-6 E-2 2 3 4 • See page 37 for Circuit Boards Location. 5 6 7 8 9 10 A AMP BOARD (COMPONENT SIDE) 2 IC303 B 1 3 C IC3003 IC310 IC308 IC305 1 4 5 D E F G H I J K 11 L 1-685-079- (CHASSIS) 54 54 (11) HCD-C770/C990 7-24. PRINTED WIRING BOARDS – AMP Section (2/2) – 1 2 3 4 • See page 37 for Circuit Boards Location. 5 6 8 9 10 11 (Page 42) M301 (FAN) M A 7 C AMP BOARD (CONDUCTOR SIDE) 12 13 14 15 16 (Page 42) D DVD BOARD CN001 • Semiconductor Location DVD BOARD CN004 2 B E IC302 1 3 C R PIN301 Q492 AUDIO BOARD CN204 (Page 58) D C111 C112 C122 C121 C113 C123 C114 C124 C115 C125 C116 C126 E 2 1 2 1 2 1 2 1 2 1 2 1 IC301 F C131 IC304 C132 IC306 C133 IC307 C134 IC309 C135 IC311 C136 HP BOARD (COMPONENT SIDE) G 20 19 20 19 20 19 20 19 20 19 20 19 H I 11 1-685-887- (11) J401 SPEAKER (Page 69) (FRONT VIEW) J FRONT R 9 – 10 + 11 12 – + CENTER 5 – 6 + 7 – 8 + WOOFER REAR R 1 – 2 + 3 – 4 + REAR L HP BOARD POWER BOARD CN904 FRONT L (CONDUCTOR SIDE) J 1 5 J900 K PHONES E IC401 E L 11 11 1-685-079- 55 55 (11) 1-685-887- (11) Ref. No. Location D311 D312 D313 D314 D315 D316 D321 D322 D323 D324 D325 D326 D351 D352 D353 D354 D355 D356 G-3 H-5 H-6 H-8 H-9 I-10 H-4 H-6 H-7 H-8 H-10 H-11 E-4 E-5 E-7 E-8 E-9 E-10 IC301 IC302 IC304 IC306 IC307 IC309 IC311 IC401 F-4 B-6 G-5 G-7 G-8 G-9 G-11 K-10 Q190 Q900 Q901 B-7 K-15 L-16 HCD-C770/C990 7-25. SCHEMATIC DIAGRAM – AMP Section (1/2) – • See page 71 for Waveforms. • See page 76 for IC Block Diagrams. (1/2) CN300 5P A19 32V A1 C300 2200 35V 32V A2 PGND A3 IC303 BA033FP-E2 O I LAT3 SCDT SHIFT A4 C306 0.01 C311 0.01 C312 100 10V G C309 0.1 C310 0.01 C320 100 10V FB301 A5 FB304 C323 0.01 C325 100 10V C324 0.01 R308 1.0k C326 47 6.3V R313 1.0k G 12V R301 1.0k Q190,191 FAN MOTOR CONTROL O R312 1.0k I NSMUTE IC302 BA05FP-E2 R309 1.0k (FAN) R395 180 R399 4.7k Q191 DTC124EKA R311 1.0k R397 180 PGND +3.3V REGULATOR R310 1.0k R396 180 CN302 2P M301 +5V REGULATOR Q190 2SB1013 INIT R398 47k 12V PGMUTE PGND (Page 70) C327 0.01 FB308 A6 R304 100 FB307 LAT2 SHIFT SCDT NSMUTE INIT PGMUTE D3 C348 0.01 BCKO C328 0.1 LRCKO C349 0.01 C331 0.1 R305 100 C329 220 10V A7 C330 0.01 C336 100 10V C350 100 10V C352 0.01 STREAM PROCESSOR IC305 CXD9634Q R321 100 D2 A8 R307 100 BCKO C355 0.1 LRCKO C344 0.01 C337 0.1 CN301 12P C368 0.1 C351 0.1 6.5V R330 100 6.5V C358 0.01 DGND R320 100 SCK A9 DGND R315 100 D1 R316 100 D2 D1 STREAM PROCESSOR D2 R317 100 D3 IC308 CXD9634Q D3 R318 100 BCKO R319 100 LRCKO BCKO R333 100 LRCKO (Page 52) R325 22 DGND R322 47 SCK C359 0.01 C372 0.1 SCK DGND C378 0.1 C373 0.01 A10 A11 R335 100 SCK A12 A13 (Page 59) AUDIO BOARD CN204 LAT1 SCDT SHIFT C388 0.01 C387 0.01 C389 100 10V C391 0.01 PIN301 1P R NSMUTE INIT FB315 C390 0.01 PGMUTE FB314 R337 1.0k C393 0.01 R343 100 R191 15k D180 RB411D A14 CN305 17P C394 0.1 D1 R334 470 INIT R336 470 PGMUTE R338 0 NSMUTE BCKO INIT Q192 DTC124EKA PGMUTE NSMUTE D192 UDZSTE-1713B POWER ON D181 MA111-TX C392 100 10V LRCKO MUTING DGND R339 100 SCDT R340 100 SHIFT R341 100 LAT1 C474 470 16V SCDT SHIFT R470 22k DGND C409 0.01 R348 100 A15 LAT1 R342 100 LAT2 R344 100 LAT3 LAT2 R471 22k LAT3 C471 120p R473 22k DGND (Page 52) R346 0 EN R347 0 DIAG C472 100p R472 22k EN C399 0.1 STREAM PROCESSOR IC310 CXD9634Q R474 33k A16 DIAG R349 100 HPSW DGND R491 10k C490 100 16V C491 0.1 R490 10k R485 24k C483 100p R475 24k C473 100p RELAY HPMUTE C493 47 35V VCC HEADPHONE AMP IC401 NJM4580E(TE2) C408 0.1 GND SCK A17 R902 68 L901 33µH C904 0.1 R903 4.7k C991 0.01 R350 100 L903 C410 0.1 Q900 DTC343TK FB803 MUTING FB805 J900 PHONES C902 0.01 R900 4.7k Q901 DTC343TK FB804 MUTING C903 0.01 L900 33µH C992 R901 0.01 68 CN900 5P R481 22k CN309 5P HP.L-CH HP-SW GND HP-MUTE HP.R-CH HP.R-CH HP-MUTE GND HP-SW HP.L-CH C481 120p R483 22k C482 100p R480 22k R482 22k C484 470 16V C415 0.01 C416 0.01 A18 C192 0 L902 R484 33k (CHASSIS) 56 56 (Page 57) HCD-C770/C990 7-26. SCHEMATIC DIAGRAM – AMP Section (2/2) – • See page 71 for Waveform. • See page 76 for IC Block Diagrams. (2/2) POWER AMP A1 A2 R300 10k C181 0.01 IC301 CXD9702L A4 A5 FB300 L300 0 D351 SFPL C301 22 6.3V C302 0.01 C162 0.1 L401 10µH DIAG EN A3 C303 0.022 D361 SFPL J401 C142 0.01 SPEAKER C182 0.01 D311 LI116 D331 P6SMB39AT3 C452 1 D321 LI116 D341 P6SMB39AT3 C451 1 FRONT L BUFFER VCC C304 0.022 FB303 C161 0.1 GND IC300 MC74VHC1G04 X300 49.152MHz C318 100 10V R370 680 C319 0.1 C317 100 50V C316 0.01 C313 0.1 C401 100 10V C400 0.1 C111 0.01 C121 0.1 C141 0.01 FRONT R C131 0.1 C308 0.001 WOOFER C307 5p R302 1M L302 1µH C432 10.0p POWER AMP A6 IC304 CXD9702L A7 CENTER C164 0.1 L402 10µH D352 SFPL C334 0.022 D362 SFPL D312 LI116 D332 P6SMB39AT3 C453 1 D322 LI116 D342 P6SMB39AT3 C454 1 C144 0.01 REAR L A8 C333 0.022 A9 FB309 C163 0.1 C143 0.01 REAR R D190 C190 RB411D 2.2 C345 100 10V C343 0.1 C342 100 50V C341 0.01 C332 0.1 C407 100 10V C406 0.1 C112 0.01 C122 0.1 C132 0.1 R103 100k C102 1 R110 100k R104 100k C105 1 R109 100k A19 Q103,104 R190 100k C191 1 50V POWER AMP D191 RB411D OVER LOAD DETECT IC306 CXD9702L C168 0.1 L403 10µH Q103 2SC2412 C148 0.01 Q104 2SC2412 Q110 2SC2412 Q109 2SC2412 R111 100k Q109,110 OVER LOAD D353 SFPL C356 0.022 D363 SFPL D313 LI116 D333 P6SMB39AT3 C455 1 D323 LI116 D343 P6SMB39AT3 C456 1 D102 MA111-TX Q112 2SC2412 D105 MA111-TX C106 1 D106 MA111-TX Q111,112 OVER LOAD A10 C354 0.022 A11 FB312 C362 100 10V C365 0.1 C364 100 50V C363 0.01 C353 0.1 C417 100 10V C113 0.01 C414 0.1 C123 0.1 C167 0.1 C147 0.01 C166 0.1 C146 0.01 R112 100k Q111 2SC2412 DETECT C133 0.1 POWER AMP (Page 56) IC307 CXD9702L L404 10µH D354 SFPL C376 0.022 D364 SFPL D314 LI116 D334 P6SMB39AT3 C457 1 D324 LI116 D344 P6SMB39AT3 C458 1 R106 100k D103 MA111-TX Q106 2SC2412 C103 1 Q105,106 OVER LOAD A12 C375 0.022 A13 FB313 C381 100 10V C384 0.1 C383 100 50V C382 0.01 C374 0.1 C423 100 10V C418 0.1 C114 0.01 C124 0.1 C165 0.1 C145 0.01 C170 0.1 C150 0.01 R105 100k Q105 2SC2412 DETECT C134 0.1 POWER AMP IC309 CXD9702L L405 10µH D355 SFPL C397 0.022 D365 SFPL D315 LI116 D335 P6SMB39AT3 R107 100k C460 1 D104 MA111-TX Q107 2SC2412 C104 1 D325 LI116 D345 P6SMB39AT3 C459 1 Q107,108 OVER LOAD A14 C396 0.022 A15 FB318 C405 100 10V C404 0.1 C403 100 50V C402 0.01 C395 0.1 C425 100 10V C424 0.1 C115 0.01 C125 0.1 C169 0.1 C149 0.01 C172 0.1 C152 0.01 R108 100k Q108 2SC2412 DETECT C135 0.1 POWER AMP IC311 CXD9702L L406 10µH D356 SFPL C413 0.022 D366 SFPL D316 LI116 D336 P6SMB39AT3 C461 1 D326 LI116 D346 P6SMB39AT3 C462 1 R101 100k D101 MA111-TX Q102 2SC2412 C101 1 Q114 DTA114EK Q101,102 OVER LOAD A16 C412 0.022 A17 FB320 C171 0.1 R102 100k C151 0.01 Q101 2SC2412 DETECT Q113 DTC124EKA Q113,114 C422 100 10V C421 0.1 C420 100 50V C419 0.01 C411 0.1 C427 100 10V C426 0.1 C116 0.01 C126 0.1 C136 0.1 R113 100k A18 57 57 PROTECT DETECT DETECT HCD-C770/C990 7-27. PRINTED WIRING BOARDS – AUDIO Section – • Semiconductor Location 2 3 4 5 6 7 Location B-2 A-4 A-4 IC201 IC202 B-2 A-5 Q201 Q205 Q206 Q207 Q208 Q220 Q221 Q222 Q223 E-2 E-5 E-5 E-3 E-3 E-2 E-2 A-4 A-3 AUDIO BOARD (COMPONENT SIDE) A IC202 B IC201 11 1-685-073- (11) J205 C VIDEO 1 R AUDIO OUT J206 VIDEO OUT L R AUDIO IN L VIDEO IN VIDEO 2 R AUDIO IN L VIDEO IN Y PB/CB P/CR COMPONENT VIDEO OUT AUDIO BOARD (CONDUCTOR SIDE) D E E AM COAXIAL FM 75Ω E SEL BOARD E E E E E FM/AM TUNER PACK F SUPPLIED WITH THE ASSEMBLED BLOCK SCAN SELECT 11 (11) INTERLACE R AMP BOARD PIN301 (Page 55) E DVD BOARD CN002 K (Page 42) 58 VIDEO BOARD CN207 (Page 60) 58 SELECTABLE 1-685-889- D201 D202 D203 1-685-073- Ref. No. 1 • See page 37 for Circuit Boards Location. 11 (11) HCD-C770/C990 7-28. SCHEMATIC DIAGRAM – AUDIO Section – • See page 71 for Waveform. • See page 76 for IC Block Diagrams. CN201 11P L-CH TD C214 0.01 R212 220 TUNED R-CH C213 0.01 (AEP) COAXIAL 10V FM/AM TUNER PACK SUPPLIED WITH A.GND C201 330p R201 4.7k FM-DET THE ASSEMBLED BLOCK A.GND CL R208 220 DO R209 220 FM 75Ω AM CK Q201 2C2412 L205 10µH R292 1k C215 1 R207 270 R204 47k R202 1k R205 100k C216 1 R290 470k C203 0.1 R293 1k CE R291 470k Q221 2SC2412 AMP AMP DI CN205 2P C210 22 35V C205 0.01 R294 330 R295 330 SELECTABLE INTERLACE CN202 29P C211 22 35V RDATA RCLK DO C206 TUNDO 51 DI TUNDIN C208 56 C207 4.7 50V TD TUNSTE X201 4.332MHz CE TUNCE CL TUNCLK D.GND IC201 BU1924F-E2 D.IN D.DND D.OUT C221 22 35V C223 0.1 L206 10µH D.GND I/P-SEL J205 6P C225 0.1 R223 10k R218 10k R217 33k R225 33k R215 6.8k R214 6.8k NC C220 22 35V AUDIO OUT R AV0 AV1 (Page 52) AV2 R229 100k C234 1000p R219 100 R233 10k VIDEO IN R231 75 C239 22 35V R243 6.8k A.GND AUDIO INPUT R VSS VEE INH A.GND Q206 DTC124EK IC202 MC14052 BDR2 R.IN C222 22 35V INVERTER R244 10k A.GND L.IN Q205 DTC124EK AUDIO IN R 10V 10V INVERTER COMPONENT VIDEO OUT C226 0.1 Y VIDEO 2 L B A X3 X X0 VDD R250 10k R251 75 TU-ON R221 100k SELECTOR C235 22 6.3V Y0 R232 6.8k X1 R222 33k AUDIO IN L VIDEO OUT AUMUTE R220 100k DGND R238 10k Y1 VIDEO 1 C237 22 6.3V X2 C238 220p Y3 R241 47k Y R235 47k R237 6.8k Y2 C236 220p AUDIO OUT L R226 33k R224 100 C224 22 35V C609 6800p AUDIO IN R C233 1000p C608 6800p R230 100k R249 6.8k AUDIO IN L C241 22 35V R242 10k R247 10k R236 10k R252 10k C227 22 35V C228 0.1 R227 1k C230 10 50V COMPONENT R253 47k VIDEO OUT C242 220p R228 1k PB/CB R246 47k VIDEO IN C232 10 50V CN204 2P Q207,208 C240 220p MUTING Q207 DTC343TK-T -146 COMPONENT R R239 1k VIDEO OUT AMP BOARD (1/2) PIN301 PR/CR Q208 DTC343TK-T -146 J206 6P R245 1k (Page 56) CN208 11P Y CB V-OUT CR R254 75 V1-IN C243 10 6.3V AV2 V2-IN C245 10 50V AV1 AVO GND D-IN 59 59 S201 SCAN SELECT R213 47k C204 560p CNP205 2P D202 MA111-TX D201 UDZ-TE17-4.3B RDS DECODER R203 68k Q223 DTC124EKA Q220 2SC2412 R210 220 DI Q222 2SA1037AK R216 4.7k C209 47 16V R211 220 CE Q222,223 B+ SWITCH D203 MA111-TX R206 470k BUFFER DO (Page 61) HCD-C770/C990 7-29. PRINTED WIRING BOARD – VIDEO Section – • Semiconductor Location 2 3 4 5 Location IC204 IC206 IC207 IC208 IC209 D-2 D-4 B-5 D-3 B-4 Q210 Q214 A-4 A-4 VIDEO BOARD (COMPONENT SIDE) A B 16 9 1 8 IC207 IC209 11 1-685-072- K VIDEO BOARD C (11) (Page 42) (Page 58) AUDIO BOARD CN208 F DVD BOARD CN003 (CONDUCTOR SIDE) J202 MONITOR OUT S VIDEO VIDEO 4 2 3 1 IC208 D IC206 Ref. No. 1 • See page 37 for Circuit Boards Location. 3 1 4 6 IC204 OPTICAL DIGITAL IN VIDEO 2 IC204 11 1-685-072- 60 60 (11) HCD-C770/C990 7-30. SCHEMATIC DIAGRAM – VIDEO Section – • See page 76 for IC Block Diagrams. 75Ω DRIVER IC206 MM1510 C218 47 16V C202 220 6.3V OPTICAL RECEIVER C252 0.1 SAG PS OUT GND VCC IN C248 22 6.3V CN207 11P D-IN IC204 TORX179L L202 10µH GND AVO OPTICAL DIGITAL IN AV1 L209 10µH VIDEO 2 V2-IN AV2 V1-IN C278 10 6.3V VIDEO AMP, 75Ω DRIVER VIDEO C281 0.1 Y CN203 14P C296 470 4V S VIDEO R259 75 GND VIDEO C277 22 6.3V 63 IN3 VDD IN2 NC SW2 GND IN1 C294 0.1 C295 100 6.3V GND C293 100 4.0V SW1 OUT C276 10 6.3V C292 220 6.3V VCC R270 75 VIDEO INPUT GND IC209 NJM2285V CB FB204 C267 100 6.3V D5V FB206 D5V GND C287 0.1 C298 100 4V C299 22 I/P SW CR IC207 NJM2235V SELECTOR C279 0.01 FB205 SELECTOR C297 220 6.3V R268 75 62 6.3V FB203 C272 0.1 VIDEOY GND FB202 C300 100 6.3V R273 75 C301 22 6.3V 61 C290 0.1 C289 10 6.3V VIDEOC C265 10 6.3V GND FB201 C274 10 6.3V VIDEOV C302 100 6.3V VS/WIDE C275 0.1 C291 10 6.3V Q210 DTA114EKA C280 1.0 50V Q210,214 C283 1.0 WIDE SWITCH R278 10k (Page 59) V-OUT CB GND R269 75 CR R256 10k C282 0.1 MONITOR OUT C284 100 6.3V 64 C288 0.1 J202 2P C285 0.1 IC208 MM1568 65 R267 75 L207 10µH R286 10k Q214 DTC144EKA R266 10k 50V C286 0.1 61 61 R265 10k (Page 48) HCD-C770/C990 7-31. PRINTED WIRING BOARDS – DC-DC CONVERTER Section – • Semiconductor Location Ref. No. 1 • See page 37 for Circuit Boards Location. 2 3 4 5 Location D806 D807 D808 D809 D810 D812 E-2 E-2 E-2 E-2 E-3 C-5 IC801 D-3 Q803 Q804 E-2 D-2 DDCON BOARD (COMPONENT SIDE) A B 11 1-685-070- (Page 64) CONTROL BOARD CNP804 N C POWER LED BOARD (11) DDCON BOARD (CONDUCTOR SIDE) D812 STANDBY M IC801 G 10 KEY BOARD CN811 (Page 64) 9 DVD BOARD CN005 D 1 2 (Page 42) 18 P POWER SW BOARD CNP911 (Page 69) 1 1 2 DC- DC CONVERTER E L E E FL BOARD CN805 (Page 66) 1-685-07011 (11) 62 62 11 1-685-071- (11) HCD-C770/C990 7-32. SCHEMATIC DIAGRAM – DC-DC CONVERTER Section – CN814 19P CN804 5P 6.5V DGND ENB ENA KEY1 KEY0 (Page 65) KEY2 FDATA FCS SIRCS (Page 51) FCLK DGND DIMM DGND CN812 12P 5V VSS P1(G) P8(R) P2(R) P7(G) P3(G) P6(R) P4(R) P5(G) VDD P11 P9(G) CLR STB IC801 NJU3713G P10(R) LED DRIVER CLK P12 0.001 C805 0.01 DATA LCLR C804 0.01 LCS C803 R814 47k POWER-SW C802 0.001 STBY-LED CN807 2P (Page 65) R813 100 R812 100 (Page 70) R811 100 FB801 FB800 FB802 R810 100 C806 22 6.3V CNP809 2P CN803 10P R838 47 CN802 2P SIRCS 5V R804 470 DGND R841 100 FDATA R842 100 FCLK R843 100 FCS D812 SLR325VR-T31 DIMM STANDBY FL1 D806 MA111-TX C821 10 10V FL VFL R850 3.9k L801 47µH D807 MA111-TX T801 DC-DC Q803,804 CONVERTER D808 MA111-TX OSC C820 0.01 D809 MA111-TX Q803 2SD1624-T -TD RECT 63 63 D810 UDZS-TE17 -6.2B R874 33k D806-809 Q804 2SD1624-T -TD C823 10 50V C822 0.1 R855 100 (Page 67) HCD-C770/C990 7-33. PRINTED WIRING BOARDS – CONTROL Section – • Semiconductor Location Ref. No. D801 D802 D803 D804 D805 1 Location A-6 A-5 A-4 A-3 A-2 2 • See page 37 for Circuit Boards Location. 3 4 5 6 7 KEY BOARD (COMPONENT SIDE) A 11 S820 S818 D805, S819 DISC5 (DISC5) S816 D804, S817 DISC4 (DISC4) D803, S815 DISC3 (DISC3) S814 D802, S813 DISC2 (DISC2) S812 1-685-069- (11) 1-685-069- (11) D801, S811 DISC1 (DISC1) KEY BOARD (CONDUCTOR SIDE) B 11 M DDCON BOARD CN812 (Page 62) CONTROL BOARD (COMPONENT SIDE) C D 11 1-685-068- VOL BOARD E (11) ROTARY ENCODER VOLUME CONTROL BOARD (CONDUCTOR SIDE) 3 1 N DDCON BOARD CN804 11 1-685-887- + (11) NEXT F PRESET − (Page 62) PREV DISPLAY SOUND, − G BAND FUNCTION 1-685-068- 11 (11) S821 FIELD, + 64 64 HCD-C770/C990 7-34. SCHEMATIC DIAGRAM – CONTROL Section – R873 220 DISC1 DISC2 DISC3 (DISC1) (DISC2) (DISC3) (DISC4) (DISC5) DISC4 R835 220 S813 R834 330 R833 470 D805 SML-020MDT S815 S812 R832 680 R829 1k D804 SML-020MDT DISC5 S814 S816 R830 1.5k R831 2.2k D803 SML-020MDT DISC4 S818 S820 R828 4.7k R827 10k D802 SML-020MDT DISC3 S817 S819 R849 680 R860 1k S821 S822 FIELD,+ SOUND,- S823 S824 S825 GND DISPLAY BAND R801 470 R802 680 FUNCTION R826 33k R809 220 D801 SML-020MDT DISC2 R844 470 DISC5 CNP808 5P S811 R837 330 R800 330 R803 1k (Page 63) DISC1 S804 S802 S801 S805 S803 CN811 12P NEXT R825 820 R824 820 R823 820 R822 820 R821 820 R820 820 R819 820 R818 820 R817 820 R816 820 PREV + (Page 63) CNP813 3P CN820 3P PRESET - C800 0.01 ENB S800 ROTARY GND ENCODER VOLUME ENA C801 0.01 65 65 HCD-C770/C990 7-35. PRINTED WIRING BOARD – FL Board – • See page 37 for Circuit Boards Location. FL BOARD (COMPONENT SIDE) 11 1-685-886- (11) FL BOARD (CONDUCTOR SIDE) 1 3 FLUORESCENT INDICATOR TUBE 11 L DDCON BOARD CN803 (Page 62) 66 66 (11) IC101 IC802 1-685-886- HCD-C770/C990 7-36. SCHEMATIC DIAGRAM – FL Board – • See page 71 for Waveform. • See page 76 for IC Block Diagram. FL801 REMOTE CONTROL RECEIVER IC101 NJL62H400A-1 FL DRIVER IC802 MSM9202-05GS -KDR1 C808 0.01 C809 22 6.3V CN805 10P SIRCS R815 47 C813 0.1 5V 47p C818 C817 0.001 VFL 0.001 FL C816 FL1 C815 100p C814 0.001 DIMM (Page 63) C819 0.1 R839 10k 67 67 P29 P30 P31 P32 P33 P34 P35 12G 11G 8G 9G 7G 6G 5G 4G OSC FCS 10G C818,R840 3G FCLK 1G FDATA 2G C812 47 6.3V R840 3.3k DGND 1G 3G 2G 4G 5G 7G 6G 9G 8G 10G 12G P34 11G P33 P25 P37 P32 P24 P28 P31 P23 P35 P30 P22 P36 P29 P21 P27 P28 P19 P20 P26 P26 P27 P17 P18 P24 P25 P23 P16 P22 P14 P15 P21 P13 P17 P8 P20 P16 P7 P12 P15 P6 P11 P14 P5 P18 P13 P4 P19 P12 P3 P10 P11 P2 P9 P9 P10 P1 P8 P36 P7 P37 P6 P5 P4 P2 P3 P1 FLUORESCENT INDICATOR TUBE HCD-C770/C990 7-37. PRINTED WIRING BOARD – POWER Section (1/2) – 1 2 3 • See page 37 for Circuit Boards Location. 4 5 POWER BOARD (COMPONENT SIDE) A B C D E F 11 1-685-080- 68 68 (11) HCD-C770/C990 7-38. PRINTED WIRING BOARDS – POWER Section (2/2) – 1 2 • See page 37 for Circuit Boards Location. 3 4 5 6 POWER BOARD (CONDUCTOR SIDE) 5 1 1 5 1 • Semiconductor Location Ref. No. IC905 (US, CND) IC908 H 1 DVD BOARD CN008 E 2 E (Page 42) (AEP, UK) 5 9 3 E B 8 (CHASSIS) A IC903 7 POWER SW BOARD POWER SW BOARD (COMPONENT SIDE) (CONDUCTOR SIDE) (AC IN) 1 1 5 1 IC906 2 IC904 C A K A 2 1 J E (Page 55) 3 IC902 3 2 1 POWER E T901 POWER TRANSFORMER E E E E D-5 E-1 F-3 E-2 F-2 F-3 C-3 D-2 B-4 B-3 A-4 B-2 A-3 D-4 D-4 B-3 E-3 E-2 F-2 B-3 IC901 IC902 IC903 IC904 IC905 IC906 IC908 IC909 F-3 D-2 A-2 C-3 A-4 B-3 A-3 F-1 PC901 E-2 Q901 Q902 Q903 Q904 Q905 Q906 Q910 Q911 Q912 Q914 Q990 Q991 Q992 D-2 D-1 D-2 E-2 F-2 E-1 D-2 E-2 E-1 E-2 B-3 B-3 B-3 E AMP BOARD CN300 D Location D902 D904 D905 D906 D907 D908 D911 D912 D913 D914 D915 D916 D917 D919 D920 D921 D931 D932 D933 D990 E E K E P DDCON BOARD CN807 C A PC901 (Page 62) E (AEP, AUS) 1-685-081- IC909 11 1 5 11 IC901 1-685-080- F (AEP, AUS) (US, CND) (CHASSIS) 69 69 (11) (11) 1-685-081- 11 (11) HCD-C770/C990 7-39. SCHEMATIC DIAGRAM – POWER Section – • See page 76 for IC Block Diagrams. (Page 63) CNP911 2P D911 FML-22S RECT ∗ F901 C913 10000p 630V (AEP,AUS) (AEP,AUS) ∗ C912 1000 200V (US,CND) R908 68k 3W R905 68k 3W (AEP,AUS) POWER CONTROL R913 2.2 (AEP,AUS) C914 47 50V D907 1SS133T-77 (US,CND) D905 11EQS10 CN903 14P VIN (US,CND) D912 MTZJ-T-77 -6.2B R907 4.7k ∗ IC903 SI-8050S REGULATOR L907 10µH L908 10µH L911 10µH ∗ C919 10µH NC L906 10µH 6.5V L910 10µH Q901 DTC114EKA E5.6V RESET P.CONT2 R925 180 R914 2.7k L905 12V P.CONT1 IC906 SI-8033JF 470p 2kV (AEP,AUS) 10µH DVD3.3V +3.3V PC901 IC TLP421 2200p 1.5kV (US,CND) L904 +6.5V REGULATOR ISOLATOR C916 R936 150k C935 1000 16V L909 100µH 820 (AEP,AUS) REGULATOR R911 3.9k D921 11EQS04-TA 1B C934 0.1 R916 +20V ∗ C916 C905 0.0047 C924 2200 35V SWITCHING D906 11EQS10 Q905 2SD1616 IC901 STR-F6267 GND R915 180 1.2k D933 11EQS10 IC908 SI-8120JF C IC902 SE-B2 (CHASSIS) D932 MTZJ-T-77-22B SW OUT REF +12V REGULATOR ON/OFF RBV-606 ON/OFF R934 100k GND (US,CND) VIN RBV-604 390 450V STR-F6238 (Page 56) VOS D920 10E6N SW OUT ∗ RECT EB901 12V D902 ∗ D902 C911 2200p 250V PGND GND C910 2200p 250V R900 3.3M 1/2W C926 100p VOS ∗ R917 2.7k 32V PGND VIN C912 R930 3.3M (US,CND) TH901 R920 100 SW OUT C909 2200p 250V R919 15k C918 0.1 ∗ TRANSFORMER R909 47k 2W C921 2200 35V C902 0.1 250V F901 ∗ POWER D919 10E6N VOS LF901 CN902 2P ON/OFF C903 0.1 LF902 250V (AEP,AUS) CN901 2P CN904 5P 32V L901 10µH C920 T901 GND (AEP,AUS) C923 2200 35V C900 CN900 0.1 2P 275V (AEP,AUS) (US,CND) POWER (AC IN) (US,CND) 4700p 630V (AEP,AUS) T3.15AL/250V D908 SARS03 5A/125V S901 ∗ C920 2700p 630V A/D R929 10 L902 100µH MGND DGND 470p (US,CND) C901 4.7 50V C904 220p D931 MTZJ-T-77 -20B C919 ∗ C936 0.1 1000p (AEP,AUS) (US,CND) R901 220 R902 0.15 1W R903 0.15 1W C930 0.1 D916 FMB-G16L C931 L903 1000 100µH 10V C942 4.7 50V R928 10k POWER ON/OFF R933 10k CONTROL R932 10k GND BUFFER Q910 DTC114EKA Q902,906 Q903 DTC114EKA IC909 BA10358F VCC C939 2200p POWER Q902 DTC114EKA ON/OFF Q910,911 Q906 DTC114EKA CONTROL EB902 POWER ON/OFF CONTROL (CHASSIS) +5.6V REGULATOR +6.8V REGULATOR Q992 2SC2412 R940 15k R939 1k R918 2.7k R931 2.7k C915 0.1 C941 47 16V D904 MTZJ-T-77 -6.8B Les composants identifiés par une marque 0 sont critiques pour la sécurité. Ne les remplacer que par une pièce portant le numéro spécifié. 70 VOLTAGE DETECT Q911 DTC114EKA O IC904 M51945BL G Q990,991 R943 1.8k (CHASSIS) The components identified by mark 0 or dotted line with mark 0 are critical for safety. Replace only with part number specified. R921 22k BA05T I DETECT R906 10k C937 0.047 IC905 VOLTAGE R927 1.0k C946 0.1 R942 1k RESET C922 0.001 Q912 2SC2412 NC Q914 2SC2412 Q990 2SB1640 R938 4.7k Q904 2SC2412K GND R926 100k VCC R941 10k IN D917 11ES2 D990 MA111-TX R910 4.7k OSC D913 MA111-TX Q912,914 70 Q991 2SC2412 R923 10k B+ SWITCH C928 2200 35V C927 0.1 D915 11ES2 C929 100 10V C925 47 16V R922 6.2k R935 100k DGND AGND P.CONT3 Q901,903 C938 0.001 R912 1.5k C933 1000 10V D914 FMB-G16L R937 1k C917 2200p 250V R904 0.22 1W R924 560 C932 0.1 (Page 53) HCD-C770/C990 • Waveforms – RF Board – – DVD Board – 1 IC001 1 (DVDRFP) qa IC401 0 (WFCK) Approx. 400 mVp-p qh IC401 yj (BCK) 43.4 µs 2 IC001 el (TE) 5 Vp-p 3.4 Vp-p 154 ns qj IC401 ua (XTAI) qs IC401 el (FE) Approx. 50 mVp-p Approx. 100 mVp-p 4.6 Vp-p 29.5 ns qk IC701 <zzm (RFIN) qd IC401 ra (TE) 3 IC001 r; (FE) Approx. 50 mVp-p 4 IC001 tj (RFAC) Approx. 1.2 Vp-p Approx. 100 mVp-p ql IC701 <zbz (WFCK) qf IC401 t; (RFAC) Approx. 1.2 Vp-p Approx. 1.2 Vp-p 3.4 Vp-p 43.4 µs w; IC701 <zb, (BCLK) qg IC401 yg (LRCK) 5 Vp-p 3.5 Vp-p 7.4 µs 154 ns 71 HCD-C770/C990 wa IC701 <znc (LRCK) wh IC301 ra (EXTAL) ea IC206 <zz. (VDAC 4) (NTSC Color Bars Play) 1.6 Vp-p 3.5 Vp-p 750 mVp-p H 50 ns 7.4 µs ws IC701 <zm/ (XTAL1) wj IC301 yg (TE) es IC206 <zxx (VDAC 3) (NTSC Color Bars Play) Approx. 100 mVp-p 3 Vp-p 750 mVp-p H 29.5 ns wd IC801 qa (MCKI) wk IC301 yj (FE) ed IC206 <zxb (VDAC 2) (NTSC Color Bars Play) Approx. 50 mVp-p 4.5 Vp-p 850 mVp-p H 29.5 ns wf IC801 qd (EXCKO1) ef IC206 <zx, (VDAC 1) (NTSC Color Bars Play) wl IC303 3 (MO1) 900 mVp-p 4.3 Vp-p 5.3 Vp-p H 37 ns 43 ns wg IC801 ys (PHREFO) e; IC303 8 (XTO) eg IC206 <zcz (VDAC 0) (NTSC Color Bars Play) 3.7 Vp-p 5 Vp-p 1.3 Vp-p H 354 ns 72 37 ns HCD-C770/C990 eh IC206 <zc. (XIN) ra IC606 wa (XOUT) 4.3 Vp-p 3.9 Vp-p 3.4 Vp-p 81 ns 37 ns ej IC606 qd (CKOUT) 74.1 ns rs IC612 rd (F2BCK) 81 ns rj IC607 qf (SCKOUT) 5 Vp-p 4.4 Vp-p rd IC612 rf (F2LRCK) 4.2 Vp-p rk IC607 ql (LRCKO) 20.8 µs 20.8 µs rf IC612 rl (CKOUT) 3.5 Vp-p rl IC607 w; (BCKO) r; IC606 w; (XMCK) 4.7 Vp-p 5 Vp-p 81 ns 20.8 µs 3.5 Vp-p 3.5 Vp-p 325 ns el IC606 qg (LRCK) 4.6 Vp-p 81 ns 325 ns ek IC606 qf (BCK) 325 ns rg IC612 ts (MCK) t; IC901 ek (X2) 1.8 Vp-p 4.2 Vp-p 4.4 Vp-p 81 ns rh IC607 qs (MCLK2) 43 ns 50 ns 73 HCD-C770/C990 – AMP Board – ta IC602 qd (LRCK) ih IC300 4 ia IC305, 308, 310 rf (BCK) 20 ns 325 ns 20.8 µs ts IC602 qf (BCK) is IC305, 308, 310 rg (LRCK) 5.9 Vp-p 3.7 Vp-p 325 ns 20.8 µs id IC305, 308, 310 yf (XFSIIN) 3.4 Vp-p 81 ns if IC305 ud (FSOCKO) 3.7 Vp-p 20.8 µs ig IC305 uj (XFSOOUT) 3.5 Vp-p 20 ns 74 3.3 Vp-p 3.6 Vp-p 6.3 Vp-p HCD-C770/C990 – AUDIO Board – – VIDEO Board – – DDCON Board – ua IC201 qf (X0) ya IC208 qk, ql (CrOUT) (NTSC Color Bars Play) os Q803, 804 (Collector) 18.6 Vp-p 3.4 Vp-p 1.4 Vp-p H 231 ns 9.1 µs ys IC208 wa, ws (CbOUT) (NTSC Color Bars Play) 1.4 Vp-p H – FL Board – yd IC208 wf, wg (CYOUT), wj, wk (YOUT) (NTSC Color Bars Play) oa IC802 tk (OSCO) 2.2 Vp-p 2.1 Vp-p H 504 ns yf IC208 e;, ea (VOUT) (NTSC Color Bars Play) 2.5 Vp-p H yg IC208 ed(COUT) (NTSC Color Bars Play) 1.7 Vp-p H 75 HCD-C770/C990 • IC Block Diagrams – RF Board – ATOP ATON AIN AIP VPA RFAC BYP DIN DIP FNP FNN VNA MEV RX CXD1881AR RFDC RFSIN IC001 64 63 62 61 60 59 58 57 56 55 54 53 52 51 50 49 FAST ATTACK INPUT SEL DVDRFP 1 DVDRFN 2 ATT 4 MUX INPUT BIAS ATT PROGRAMMABLE EQUALIZER FILTER DIFFERENTIATOR AGC 2 INPUT IMPEDANCE SEL + CLAMP & ENVELOPE – 2 INPUT IMPEDANCE SEL OUTPUT FULL WAVE INHIBIT RECTIFER FROM S-PORT AGCO CONTROL SIGNALS TO EACH BLOCK BUFFER 2 SIGDET + – LEVEL DAC 3 COMPARATOR CE ATT CEPOL A2 3 PHASE DETECTOR B2 4 GCA – – – + TOPHOLD 3 3 FROM FROM VC S-PORT S-PORT TOPHOLD + + C GCA GCA LPF 44 LCP 43 LCN MNTR CONTROL 42 MNTR GCA 41 CE OFFSET CANSEL GCA 40 FE 5 FROM S-PORT 4 FROM S-PORT + + GCA B B 11 – + A+D D C 10 OFFSET CANSEL SDEN SDATA SCLK V33 4 FROM S-PORT CP 7 CN 8 D 9 V33 FOR OUTPUT BUFFER PI FE TE CE V25 V125 V25/3 PHASE DETECTOR D2 6 48 47 46 45 SERIAL PORT REGISTER LPF ATT POL SEL BUFFER + + EQ C2 5 AGC HOLD AGC CHARGE PUMP B+C A A 12 MUX GCA 3 FROM S-PORT MUX GCA LPF CD/DVD CP/CN LOW IMPEDANCE B+D CD D 13 + + + + CD B 15 OFFSET CANSEL GCA CEFDB 6 FROM S-PORT 3 FROM S-PORT FOR SERVO OUTPUT + + GCA GCA 4 FROM S-PORT 3 FROM S-PORT HOLDEN SEL A+C 3 FROM S-PORT CD/DVD 39 TE 38 PI 5 FROM S-PORT SUM AMP CD A 16 TE RST OFFSET CANSEL GCA LPF CD C 14 GCA W/LPF GCA SUB BCA DET – + TOP HOLD FROM 2 DAC S-PORT PH 37 V25 36 V125 V25/2 35 TPH COMPARATOR – + 34 DFT GCA SEL 33 LINK VCI FOR SERVO INPUT APC SEL DVD/CD DUAL APC LD H/L FROM S-PORT 76 LINKEN HYSTERESISTER & OFFSET FROM S-PORT VC = VPB/2 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 CD F CD E VPB VC DVDLD CDLD DVDPD CDPD VNB LDON MIRR MP MB MLPF MIN MEVO INTERNAL FDGHG INPUT GAIN BOTTOM INPUT FROM S-PORT AGCO ENVELOPE IMPEDANCE 2 MIRR FROM S-PORT SINK CURRENT 2 COMPARATOR 2 FROM S-PORT PH PEAK/BOTTOM INPUT HOLD BUFFER MUX HCD-C770/C990 – RELAY Board – IC701, 711, 721 BA6956AN TSD 2 3 4 5 6 7 8 9 RNF OUT1 VM VCC FIN GND RIN VREF 1 OUT2 CONTROL LOGIC – DVD Board – IC215 GND DO DI BR9040F-D-E2 WC IC203 8 7 6 5 1OE COMMAND REGISTER 16bit COMMAND DECODE CONTROL CLOCK GENERATION DATA REGISTER 2 3 1 OE LE 56 1LE 1D1 1D2 2 3 55 1Q1 54 1Q2 GND 4 53 GND 1D3 1D4 5 6 52 1Q3 51 1Q4 VCC 7 1D5 1D6 8 9 GND 10 47 GND 1D7 1D8 1D9 1D10 11 12 13 14 46 45 44 43 2D1 2D2 2D3 15 16 17 42 2Q1 41 2Q2 40 2Q3 GND 18 39 GND 2D4 2D5 2D6 19 20 21 38 2Q4 37 2Q5 36 2Q6 VCC 22 35 VCC 2D7 2D8 23 24 34 2Q7 33 2Q8 GND 25 32 GND 2D9 2D10 26 27 31 2Q9 30 2Q10 50 VCC LATCH 49 1Q5 48 1Q6 1Q7 1Q8 1Q9 1Q10 4 SK R/B 1 POWER SUPPLY VOLTAGE DETECTOR CS ADDRESS BUFFER HIGH VOLTAGE GENERATOR R/W AMP VCC 8bit ADDRESS DECODER WRITE DISABLE 16bit 8bit 4096bit EEPROM ARRAY SN74ALVCH16841DGGR 2OE 28 LATCH OE LE 29 2LE 77 HCD-C770/C990 IC302 BR24C08F-E2 8bit 8bit 2048bit EEPROM ARRAY 8bit A0 1 A1 2 A2 3 DATA REGISTER STOP SLAVE/ WORD ADDRESS REGISTER START ADDRESS DECODER 8 Vcc 7 TEST 6 SCL 5 SDA CONTROL CIRCUIT ACK GND 4 HIGH–VOLTAGE GENERATOR V16M VCTL BIAS AVDD1 PCO FILI FILO CLTV AVSS1 RFAC ASYI ASYO AVDD0 IGEN AVSS0 ADIO RFDC CE TE CXD3068Q VPCO 60 59 58 57 56 55 54 53 52 51 50 49 48 47 46 45 44 43 42 41 DVDD2 61 ASYE 62 MD2 63 OSC DIGITAL OUT DOUT 64 LRCK 65 PCMD 66 BCK 67 D/A DIGITAL INTERFACE EFM DEMODULATOR 32K RAM EMPH XTSL DVSS2 XTAI XTAO ASYMMETRY CORRECTOR 68 69 70 71 72 ERROR CORRECTOR CLOCK GENERATOR TRACKING PWM GENERATOR SLED PWM GENERATOR 76 77 78 79 80 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 SCLK ATSK WFCK XUGF XPCK GFS C2PO SCOR C4M WDCK DVSS0 COUT MIRR DATA 5 SENS 4 XLAT 3 CLOK 2 XRST DVDD0 1 MUTE CPU INTERFACE 40 39 38 37 36 35 34 SE TE VC TES1 TEST1 DVSS1 FRDR 33 FFDR 32 TRDR 31 TFDR 30 SRDR 29 SFDR 28 DVDD1 27 FSTO 26 SSTP SERVO INTERFACE SERVO AUTO SEQUENCER 78 FOCUS PWM GENERATOR SUBCODE PROCESSOR SOUT 73 SOCK 74 XOLT 75 SQSO SQCK SCSY SBSO EXCK FOCUS SERVO DSP TRACKING SERVO DSP SLED SERVO DSP OPERATIONAL AMPLIFIER & ANALOG SWITCH DIGITAL PLL A/D CONVERTER IC401 POWER SUPPLY VOLTAGE DETECTOR DIGITAL CLV PROCESSOR 25 MDP 24 LOCK 23 PWMI MIRR, DFCT, FOK DETECTOR 22 FOK 21 DFCT HCD-C770/C990 VCC C PR C NR C PR C NR VDD DGND SYSCLK DOUT BCK LRCK PCM1800E/2K AGND IC602 24 23 22 21 20 19 18 17 16 15 14 13 DIGITAL ∑ MODULATOR 1/64 DECIMATION FILTER & LOW-CUT FILTER RIN MODE0 MODE1 FSYNC V REF 2 10 11 12 5 IDT71V016S15PH-AUTL 18 19 20 21 22 44 A5 43 A6 42 A7 ROW/COLUMN DECODER OUTPUT ENABLE BUFFER 64K x 16 MEMORY ARRAY CHIP ENABLE BUFFER 7 8 9 10 11 12 13 14 15 16 WE 17 A15 A14 A13 A12 NC 7 8 9 4 1 2 3 4 5 CS 6 I/O 0 I/O 1 I/O 2 I/O 3 VDD VSS I/O 4 I/O 5 I/O 6 I/O 7 6 3 V REF 1 LIN A4 A3 A2 A1 A0 CLOCK/ TIMING CONTROL RESET/ POWER CONTROL 2 1 IC604 SINGLE-END DEFERENTIAL CONVERTER REFCOM REFERENCE BYPASS FMT0 FMT1 SINGLE-END DEFERENTIAL CONVERTER RSTB DIGITAL ∑ MODULATOR SERIAL I/O INTERFACE & MODE/FORMAT CONTROL WRITE ENABLE BUFFER LOW BYTE I/O BUFFER SENSE AMP & WRITE PRIVER BYTE ENABLE BUFFER HIGH BYTE I/O BUFFER 41 OE 40 39 38 37 36 35 34 33 32 31 30 29 28 27 26 25 24 23 BHE BLE I/O 15 I/O 14 I/O 13 I/O 12 VSS VDD I/O 11 I/O 10 I/O 9 I/O 8 NC A8 A9 A10 A11 NC 79 HCD-C770/C990 XSEL VF F2 F1 F0 CSFLAG LC89056W-E DI DO ERROR BPSYNC ERR9P DGND IC606 36 35 34 33 32 31 30 29 28 27 26 25 C BIT DETECT CE 37 CL 38 XSEL 39 MODE0 40 24 AUDIO 23 EMPHA PA/PB DETECT SAMPLING FREQUENCY MICROCOMPUTER INTERFACE MODE1 41 DGND 42 DVDD 43 LOCK DETECT DOSEL0 44 DOSEL1 45 22 21 20 19 18 17 16 15 14 13 X’ TAL DATA DEMODULATOR TIMING CKSEL0 46 CKSEL1 47 IC608 MCLK PLL DOUT DINO DINI 5 6 7 8 9 10 R VIN LPF 4 DIN2 2 3 DGND DVDD 1 DISEL INPUT CIRCUIT 11 12 AVDD AGND XMODE 48 AK4382AVT-E2 CLOCK DIVIDER 1 16 DZFL 15 DZFR DE–EMPHASIS CONTROL 14 VDD 13 VSS BICK SDTI LRCK 2 3 4 PDN 5 CSN CCLK CDTI 6 7 8 80 AUDIO DATA INTERFACE µP INTERFACE 8x INTERPOLATOR ∆∑ MODULATOR SCF 12 AOUTL+ 11 AOUTL– 8x INTERPOLATOR ∆∑ MODULATOR SCF 10 AOUTR+ 9 AOUTR– XIN XOUT XMCK DVDD DGND XSTATE DATAO LRCK BCK CKOUT HCD-C770/C990 MCK VDD5 VSS5 CKOUT TEST1 F2FLREX1 F2CSWEX2 F2SLR F2LRCK F2BCK FMT2FS VDD4 54 53 52 51 50 49 48 47 46 45 44 43 42 41 59 58 57 56 55 TEST3 EXILRCK EXIBCK EXIMCK 60 EXID1 EXID2 TEST2 CXD9633Q VSS6 IC612 2FS I/F TEST/MONITOR CONTROL 2FS EXT. DATA SELECT VDD6 61 DSBCKF 62 DSIFL DSIFR DSICT DSISW DSISL DSISR 63 64 65 66 67 68 2FS EXT. CLOCK SELECT FL FR CT SW SL SR 40 VSS4 39 DIR2CK CLOCK GENERATOR & TIMING CONTROL DIRDSCK1 69 DIRDSCK2 70 INTERNAL CLOCK SR SL SW CT FR FL CK CKB WCK BCK 38 SELDH1 37 SELDH2 FL FR CT SELRAM 71 FIR FILTER & DOWN SAMPLING UNIT SELFIR1 72 SELFIR2 73 SW PCM MUTE 36 35 34 33 8FS I/F 8FS SW/SB SELECT 32 F8BL 31 VDD3 SL SR 30 VSS3 29 F8BR 28 F8SL 27 F8SR COEF. SELECT RAM 29bit x 240 ROM 24bit x 720 XMTPCM 74 CT FR FL SW SR SL CKB WCK BCK CK SEL8FS 76 SELEXT 77 INTERNAL CONTROL VSS7 80 26 F8WCK 25 F8BCK 24 FMT8WCK 23 FMT8FS DSD MUTE XMTDSD 75 SYNC 78 INIT 79 F8FL F8FR F8CT F8SW 22 DIR8CK 21 VDD2 DSD SW/SB SELECT SELSBSW SELSBR 10 11 12 13 14 15 16 17 18 19 20 VSS2 DSGAIN 9 DSOSR DSOSL DSOBR DSOBL DSOSW DSOCT DSOFR DSOFL MSHIFT MLATCH MDATA 8 DSBCKB 6 7 VSS1 5 SELMCU 2 3 4 MONTOR 1 VDD1 CPU I/F CONTROL 81 HCD-C770/C990 40 – 36 35 34 33 TIMING GENERATOR REFRESH CONTROL CLOCK VSS 44 43 42 41 A9 A8 A7 A6 A5 A4 45 OE DQ12 DQ11 DQ10 DQ9 49 48 47 46 UCAS VSS NC 50 LCAS DQ16 DQ15 DQ14 DQ13 MSM51V18165F-60TSKR1 VSS IC706 32 31 30 29 28 27 26 INTERNAL ADDRESS COUNTER I/O CONTROLLER SENSE AMPLIFIER COLUMN DECODERS MEMORY CELLS VCC 1 2 3 4 5 6 7 8 9 10 11 – 16 17 18 VCC DQ1 DQ2 DQ3 DQ4 VCC DQ5 DQ6 DQ7 DQ8 NC WE RAS VCC ON CHIP VBB GENERATOR VCC ON CHIP IVCC GENERATOR VCC VCC 19 20 21 22 23 24 25 DQ16 DQ15 VSSQ DQ14 DQ13 VCCQ DQ12 DQ11 VSSQ DQ10 DQ9 VCCQ NC UDQM CLK CKE NC A9 A8 A7 A6 A5 A4 VSS MSM56V16160F-8TK7R1 VSS IC808 ROW DECODERS WORD DRIVERS VCC INPUT BUFFER ROW ADDRESS BUFFERS COLUMN ADDRESS BUFFERS I/O SELECTOR OUTPUT BUFFER I/O CONTROLLER A0 A1 A2 A3 INPUT BUFFER NC NC OUTPUT BUFFER 50 49 48 47 46 45 44 43 42 41 40 39 38 37 36 35 34 33 32 31 30 29 28 27 26 TIMING REGISTER OUTPUT BUFFERS PROGRAMING REGISTER READ DATA REGISTER LATENCY & BURST CONTROLLER INTERNAL COLUMN ADDRESS COUNTOR ROW ADDRESS BUFFERS INTERNAL ROW ADDRESS COUNTOR I/O CONTROLLER INPUT DATA REGISTER SENSE AMPLIFIER COLUMN DECODERS BANK CONTROLLER INPUT BUFFERS 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 DQ3 DQ4 VCCQ DQ5 DQ6 VSSQ DQ7 DQ8 VCCQ LDQM WE CAS A11 A10 A0 A1 A2 A3 VCC RAS CS 1 VSSQ ROW DECODERS DQ1 DQ2 WORD DRIVERS VCC MEMORY CELLS 82 COLUMN ADDRESS BUFFERS HCD-C770/C990 – AMP Board – IC814 TC7WH157FK (TE85R) 8 VCC 11 7 ST 11 6 SELECT A 1 A Y B 2 B Y GND 4 VBBA 1 CXD9702L VBBA VBOOTA 2 VDRVA 3 VDRVA UNDER VOLTAGE LOCK–OUT VDDA 4 EN G Y 3 IC301, 304, 306, 307, 309, 311 5 Y GNDA 5 THERMAL SHUT DOWN INA 6 ENA 7 DIAGA 8 PROTECTOR CIRCUIT CROSS OVER DELAY LOW SIDE LEVEL SHIFT HIGH SIDE LEVEL SHIFT PRE DRIVER PRE DRIVER FILTER + − + − VBBA VDRVA VBBA OUTA 9 SA 10 VBBB 11 VBBB VBOOTB 12 VDRVB 13 VDRVB UNDER VOLTAGE LOCK–OUT VDDB 14 GNDB 15 THERMAL SHUT DOWN INB 16 ENB 17 DIAGB 18 PROTECTOR CIRCUIT CROSS OVER DELAY LOW SIDE LEVEL SHIFT HIGH SIDE LEVEL SHIFT PRE DRIVER PRE DRIVER FILTER + − + − VBBB VDRVB VBBB OUTB 19 SB 20 83 HCD-C770/C990 BFVSS CKO3 CKO2 CKO1 DVSS FSOI FSOCKO SFLAG OFLFLAG OUTSEL 78 77 76 DVDD 79 XOVDD XOVSS 80 XFSOUT VSUBCR CXD9634Q VSSR2+ IC305, 308, 310 75 74 73 72 71 70 69 68 67 66 65 OUTR2+ 1 VDDR2+ 2 VDDR2– 3 OUTR2– 4 64 XFSIIN SYNC XFSIIN FSII MCKSEL CKCTL2 CKCTL1 XFSIIN CLOCK GENERATOR (PRIMARY) CLOCK GENERATOR (SECONDARY) CXWCK EXBCK EXDATAR EXDATAL VSSR2– 5 VSSR1– 6 63 62 61 60 59 EXIOSEL OUTR1– 7 VDDR1– 8 VDDR1+ 9 SgP 58 BFVDD CKCTL2 CKCTL1 57 CKCTL2 56 CKCTL1 OUTR1+ 10 55 TEST2 54 TEST1 VSSR1+ 11 VWELR 12 VWELL 13 53 DSDCKIO 52 DSDCKSEL2 51 DSDCKSEL1 PWM /THROUGH VSSL2+ 14 DOWN SAMPLING FILTER OUTL2+ 15 VDDL2+ 16 ∆∑ VDDL2– 17 LINER INTERPOLATOR (2 TIMES) GAIN CONTROL RATE CONVERTER FSII 50 49 48 47 DSDL DSDR DSD64FS DSD128FS 46 FSII OUTL2– 18 45 LRCK 44 BCK 43 DATA VSSL2– 19 SgP VSSL1– 20 OUTL1– 21 MCKSEL SYNC 42 SYNC VDDL1– 22 VDDL1+ 23 84 27 28 29 30 31 32 33 34 35 36 37 38 39 40 VSUBX MCKSEL DVDD MODE1 MODE2 SCLATCH SCSHIFT SCDT NSPMUTE PGMUTE DVSS 26 XVSS 25 XFSOIN 41 INIT XVDD INIT/ MUTE XSUBCL SERIAL CONTROL VSSL1+ OUTL1+ 24 HCD-C770/C990 – AUDIO Board – IC202 VDD2 14 13 12 11 10 DIGITAL CLOCK T2 XI 15 T1 XO 16 VSS2 NC BU1924F-E2 (AEP only) RCLK IC201 2 2XCOM 3 14 X1 2X3 4 13 XCOM 15 X2 12 X0 INH 6 11 X3 VEE 7 10 A VSS 8 9 B 3 4 5 6 7 8 VDD1 VSS1 VSS3 CMP ANALOG 2 MUX ANTI-ALIASING FILTER VREF DEFFERENTIAL DECODER 2X2 2X1 5 RDAT QUAL 1 BIPHASE DECODER 1 TEST COMPARATOR 8th SWITCHED CAPACITOR FILTER 16 VDD 2X0 9 PLL 57kHz RDS/ARI PLL 1187.5Hz MC14052 BDR2 – VIDEO Board – IC206 MM1510 6 PS SAG 1 OUT 2 IC208 DRIVER VCC1 MM1568 1 CIN 2 MUTE1 3 VIN 4 4dB LPF 4dB LPF 2dB 75Ω DRIVER 2dB 75Ω DRIVER 5 GND CLAMP VCC 3 34 VCC2 BIAS 4 IN BIAS CLAMP 32 GND2 + YC MIX 33 COUT 31 VOUT 5 30 VSAG CLAMP IC207 NJM2235V (TE2) YIN 6 BIAS 7 GND1 8 NC 9 29 GND2 LPF 4dB 2dB 75Ω DRIVER 28 YOUT BIAS 27 YSAG GND1 10 8 GND VIN 1 1 BUFFER 7 V OUT NC 11 26 GND2 CYIN 12 4dB LPF 2dB SW 1 2 CLP 13 VIN 2 3 75Ω DRIVER 24 CYSAG BIAS CLAMP 23 GND2 BIAS SW 2 4 25 CYOUT CbIN 14 6 V+ MUTE2 15 4dB LPF BIAS 2dB 75Ω DRIVER 5 VIN 3 22 CbOUT 21 CbSAG CrIN 16 GND2 17 4dB BIAS 20 GND2 LPF 2dB 75Ω DRIVER 19 CrOUT 18 CrSAG 85 HCD-C770/C990 – FL Board – IC802 MSM9202-05GS-KDR1 P1 P2 1 2 PORT DRIVER AD2 AD1 3 4 AD DRIVER ADRAM 2bit x 16 ADDRESS SELECTOR 64 VDD WRITE ADDRESS COUNTER READ ADDRESS COUNTER SEG1 SEG2 SEG3 SEG4 SEG5 SEG6 SEG7 SEG8 SEG9 SEG10 SEG11 SEG12 SEG13 SEG14 SEG15 SEG16 SEG17 SEG18 SEG19 SEG20 SEG21 SEG22 SEG23 SEG24 SEG25 SEG26 SEG27 SEG28 86 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 COMMAND DECODER 8bit SHIFT REGISTER CONTROL CIRCUIT TIMING GENERATOR2 63 DA 62 CP 61 CS 60 RESET TIMING GENERATOR1 OSCILLATOR 59 OSC1 58 OSC0 57 GND 56 VFL DIGIT CONTROL GRID DRIVER DUTY CONTROL SEGMENT DRIVER CGROM 35bit x 248 CGRAM 35bit x 8 DCRAM 8bit x 16 55 54 53 52 51 50 49 48 47 46 45 44 43 42 41 40 COM16 COM15 COM14 COM13 COM12 COM11 COM10 COM9 COM8 COM7 COM6 COM5 COM4 COM3 COM2 COM1 39 38 37 36 35 34 33 SEG35 SEG34 SEG33 SEG32 SEG31 SEG30 SEG29 HCD-C770/C990 – POWER Board – IC901 STR-F6238 (US, Canadian), STR-F6267S (AEP, Australian) DRIVE REGULATOR OVER CURRENT PROTECTOR OVER VOLTAGE PROTECTOR INH1 LATCH START THERMAL SHUT DOWN FEED BACK INH2 OSC OVER LOAD PROTECTOR REGULATOR DRIVE 3 4 5 VIN F.B SI-8050S-LF1101 IC904 1.25V 3 4 5 S.S IC908 OVER CURRENT PROTECTOR 5 + – NC OUTPUT OVER CURRENT PROTECTOR LATCH & DRIVER ON/OFF SOFT START OVER HEAT PROTECTOR OSC COMPARATOR + – + – VREF ERROR AMP LATCH & DRIVER RESET OVER HEAT PROTECTOR VREF 1 2 3 4 5 1 2 3 VIN SW OUT GND VOS ON/OFF VIN SW OUT GND ERROR AMP 4 5 VOS COMPARATOR + – SI-8120JF REGULATOR RESET OSC 4 ON/OFF VIN 2 SI-8033JF ON/OFF SOFT START 3 VREF 1 REGULATOR 2 GND + – ERROR AMP 1 INPUT COMPARATOR OVER HEAT PROTECTOR SUPPLY VOLTAGE LATCH & DRIVER RESET VOS + – – + GND OSC IC906 M51945BL OVER CURRENT PROTECTOR REGULATOR SW OUT IC903 2 D O.C.P 1 GND CURRENT MIRROR 87 HCD-C770/C990 7-40. IC PIN FUNCTION DESCRIPTION • DVD BOARD IC301 CXP973064-220R (MACHANISM CONTROLLER) Pin No. Pin Name I/O Description 1 EEP SO O Not used 2 SDEN O Serial data enable signal output to DVD/CD RF amplifier 3 DOCTRL/ ISBTEST O Digital out on/off control signal output to the digital signal processor “L”: digital out off, “H”: digital out on 4 EEP WC O Not used 5 EEP SI I/O Two-way data bus with the EEPROM 6 EEP RDY I EEPROM ready signal input from the DVD decoder 7 FCS JMP 1 O Focus jump 1 signal output to the motor/coil driver 8 FCS JMP 2 O Focus jump 2 signal output to the motor/coil driver 9 SENS CD I Internal status (SENSE) signal input from the digital signal processor 10 LOAD + O Loading motor drive signal (loading in direction) output terminal 11 LOAD – O Loading motor drive signal (loading out direction) output terminal 12 XCS DVD O Chip select signal output to the DVD decoder 13 VSS — Ground terminal (digital system) 14 to 21 D0 to D7 I/O Two-way data bus with the DVD decoder 22 INIT0 DVD I Interrupt signal input from the DVD decoder 23 INIT1 DVD I Interrupt signal input from the DVD decoder 24 SCK DSD O Serial data transfer clock signal output to the DSD decoder 25 XRST DVD O Reset signal output to the DVD decoder 26 SCOR I Subcode sync (S0+S1) detection signal input from the digital signal processor 27 LAT CD O Serial data latch pulse signal output to the digital signal processor 28 LD ON O Laser diode on/off control signal output to the DVD/CD RF amplifier “L”: laser diode off, “H”: laser diode on 29 MIRR I Mirror signal input from the digital signal processor 30 COUT CD I Numbers of track counted signal input from the digital signal processor 31 INLIM I Detection signal input from limit in switch 32 CS ZIVA O Chip select signal output to the DVD system processor 33 SI ZIVA I Serial data input from the DVD system processor 34 SO ZIVA O Serial data output to the DVD system processor 35 Serial data transfer clock signal output to the DVD system processor Not used Not used “L”: reset The optical pick-up is inner position when “H” SCK ZIVA O 36 DRVIRQ O Interrupt request signal output to the DVD system processor 37 DRVRDY O Ready signal output to the DVD system processor 38 RST I System reset signal input from the DVD system processor 39 VSS — 40 XTAL I System clock input terminal (20 MHz) 41 EXTAL O System clock output terminal (20 MHz) “L”: reset Ground terminal (digital system) 42 VDD — Power supply terminal (+3.3V) (digital system) 43, 44 SLED A, SLED B O Sled motor drive signal output 45 JIT OFFSET O Output terminal for offset adjustment of APEO (<z/. pin of DVD decoder) 46 SDOUT DSD O Serial data output to the DSD decoder 47 SDIN DSD I Serial data input from the DSD decoder 48 READY DSD I Ready signal input from the DSD decoder 49 DATA CD O Serial data output to the digital signal processor 50 CLOK CD O Serial data transfer clock signal output to the digital signal processor 51 XMSLAT O Serial data latch pulse signal output to the DSD decoder 52 SQSO I Subcode Q data input from the digital signal processor 88 “L”: ready HCD-C770/C990 Pin No. Pin Name I/O Description 53 MUTE DSD O Muting on/off control signal output to the DSD decoder 54 SQCK O Subcode Q data reading clock signal output to the digital signal processor 55 VSS — Ground terminal (digital system) 56 TRAY IN I Disc tray in detection signal input terminal 57 TRAY OUT I Disc tray out detection signal input terminal “H”: muting on Not used Not used 58 GFS DVD I Guard frame sync signal input from the DVD decoder 59 MUTE CD O Muting on/off control signal output to the digital signal processor 60 MUTE 2D O Muting on/off control signal output to the motor/coil driver 61 SLED I Sled motor servo drive PWM signal input terminal 62 FG I Spindle motor control signal input 63 SP ON O Muting on/off control signal output to the motor/coil driver 64 JIT I Jitter signal input 65 TE I Tracking error signal input from the DVD/CD RF amplifier 66 PI I Pull in signal input from the DVD/CD RF amplifier 67 FE I Focus error signal input from the DVD/CD RF amplifier 68 AVSS — 69 AVREF I 70 AVDD — 71 GFS CD I Guard frame sync signal input from the digital signal processor 72 SCLK CD O SENSE serial data reading clock signal output to the digital signal processor 73 TSD O Thermal shut down signal output to the motor/coil driver 74 FOK CD I Focus OK signal input from the digital signal processor 75 LOCK CD I GFS is sampled by 460 Hz 76 LDSEL O Laser diode selection signal output 77 SACD/DVD O SACD/DVD selection signal output 78 I2C SIO I/O Communication data bus with the DVD system processor and system controller 79 IIC-CLK I/O Communication data reading clock signal input or transfer clock signal output with the DVD system processor and system controller 80 RXD I Serial data input from the RS-232C (for check) 81 TXD O Serial data output to the RS-232C (for check) 82 SDCLK RF O Serial data transfer clock signal output to the DVD/CD RF amplifier 83 SDATA RF I/O Two-way data bus with the DVD/CD RF amplifier 84 XWR O Write strobe signal output to the DVD decoder “H”: muting on “H”: muting on “H”: muting on Ground terminal (for A/D converter) Reference voltage input terminal (for A/D converter) Power supply terminal (+3.3V) (for A/D converter) “H” input when GFS is “H” “L”: DVD, “H”: SACD 85 XRD O Read strobe signal output to the DVD decoder 86 (PWE) — Not used 87 VDD — Power supply terminal (+3.3V) (digital system) 88 VSS — Ground terminal (digital system) 89 to 96 A0 to A7 O Address signal output to the DVD decoder 97 DSAVE O Motor/coil driver power save control signal output terminal 98 XDRST O Reset signal output to the digital signal processor and DSD decoder 99 EEP WP O Write protect signal output to the EEPROM 100 EEP CLK O Clock signal output to the EEPROM Not used “L”: reset 89 HCD-C770/C990 • DVD BOARD IC401 CXD3068Q (DIGITAL SIGNAL PROCESSOR, DIGITAL SERVO PROCESSOR) Pin No. Pin Name I/O 1 DVDD0 — 2 XRST I Reset signal input from the mechanism controller 3 MUTE I Muting on/off control signal input from the mechanism controller 4 DATA I Serial data input from the mechanism controller 5 XLAT I Serial data latch pulse signal input from the mechanism controller 6 CLOK I Serial data transfer clock signal input from the mechanism controller 7 SENS O Internal status (SENSE) signal output to the mechanism controller 8 SCLK I SENSE serial data reading clock signal input from the mechanism controller 90 Description Power supply terminal (+3.3V) (digital system) “L”: reset 9 ATSK I/O Input/output terminal for anti-shock 10 WFCK O Write frame clock signal output to the DVD decoder 11 RFCK O RFCK signal output terminal Not used 12 XPCK O XPCK signal output terminal Not used “H”: muting on Not used 13 GFS O Guard frame sync signal output to the mechanism controller 14 C2PO O C2 pointer signal output to the DVD decoder 15 SCOR O Subcode sync (S0+S1) detection signal output to the DVD decoder and mechanism controller 16 C4M O 4.2336 MHz clock signal output terminal 17 WDCK O Guard subcode sync (S0+S1) detection signal output to the DVD decoder 18 DVSS0 — Ground terminal (digital system) 19 COUT O Numbers of track counted signal output to the mechanism controller 20 MIRR O Mirror signal output to the mechanism controller 21 DFCT I/O Defect signal input/output terminal 22 FOK O Focus OK signal output to the mechanism controller 23 PWMI I Spindle motor external control signal input terminal 24 LOCK O GFS is sampled by 460 Hz 25 MDP O Spindle motor servo drive signal output to the DVD decoder 26 SSTP I Detection signal input from limit in switch Not used Not used Not used “H” output when GFS is “H” The optical pick-up is inner position when “H” 27 FSTO O 2/3 divider output terminal 28 DVDD1 — Power supply terminal (+3.3V) (digital system) 29 SFDR O Sled servo drive PWM signal (+) output 30 SRDR O Sled servo drive PWM signal (–) output 31 TFDR O Tracking servo drive PWM signal (+) output 32 TRDR O Tracking servo drive PWM signal (–) output 33 FFDR O Focus servo drive PWM signal (+) output Not used 34 FRDR O Focus servo drive PWM signal (–) output 35 DVSS1 — Ground terminal (digital system) 36 TEST I Input terminal for the test 37 TES1 I Input terminal for the test 38 VC I Middle point voltage (+1.65V) input terminal 39 FE I Focus error signal input from the DVD/CD RF amplifier 40 SE I Sled error signal input from the DVD/CD RF amplifier 41 TE I Tracking error signal input from the DVD/CD RF amplifier 42 CE I Middle point servo analog signal input 43 RFDC I RF signal input from the DVD/CD RF amplifier 44 ADIO O Output terminal for the test 45 AVSS0 — Ground terminal (analog system) 46 IGEN I Not used Stabilized current input for operational amplifiers HCD-C770/C990 Pin No. Pin Name I/O Description 47 AVDD0 — Power supply terminal (+3.3V) (analog system) 48 ASYO O EFM full-swing output terminal 49 ASYI I Asymmetry comparator voltage input terminal 50 RFAC I EFM signal input from the DVD/CD RF amplifier 51 AVSS1 — 52 CLTV I Internal VCO control voltage input terminal 53 FILO O Filter output for master PLL 54 FILI I Filter input for master PLL 55 PCO O Charge pump output for master PLL 56 AVDD1 — Power supply terminal (+3.3V) (analog system) 57 BIAS I Asymmetry circuit constant current input terminal 58 VCTL I VCO control voltage input terminal for the wideband EFM PLL 59 V16M O VCO oscillation output terminal for the wideband EFM PLL Ground terminal (analog system) Not used Not used 60 VPCO O Charge pump output terminal for the wideband EFM PLL 61 DVDD2 — Power supply terminal (+3.3V) (digital system) 62 ASYE I Asymmetry circuit on/off control signal input terminal 63 MD2 I Digital out on/off control signal input from the mechanism controller “L”: digital out off, “H”: digital out on 64 DOUT O Digital audio signal output to the digital audio interface IC 65 LRCK O L/R sampling clock signal (44.1 kHz) output to the DVD decoder 66 PCMD O Serial data output to the DVD decoder 67 BCLK O Bit clock signal (2.8224 MHz) output to the DVD decoder 68 EMPH O “L” is output when playback disc is emphasis off “H” is output when playback disc is emphasis on Not used 69 XTSL I Input terminal for the system clock frequency setting “L”: 16.9344 MHz, “H”: 33.8688MHz Fixed at “H” in this set 70 DVSS2 — 71 XTAI I System clock input terminal (33.8688 MHz) 72 XTAO O System clock output terminal (33.8688 MHz) 73 SOUT O Serial data output terminal 74 SOCK O Serial data reading clock signal output terminal 75 XOLT O Serial data latch pulse signal output terminal 76 SQSO O Subcode Q data output to the mechanism controller 77 SQCK I Subcode Q data reading clock signal input from the mechanism controller 78 SCSY I Input terminal for resynchronism of guard subcode sync (S0+S1) 79 SBSO O Subcode serial data output to the DVD decoder 80 EXCK I Subcode serial data reading clock signal input to the DVD decoder Not used “L”: off, “H”: on Not used Ground terminal (digital system) Not used Not used Not used Not used Not used 91 HCD-C770/C990 • DVD BOARD IC607 CXD9617R (AUDIO DIGITAL SIGNAL PROCESSOR) Pin No. Pin Name I/O 1 VSS — Description 2 XRST I Reset signal input from the system controller 3 EXTIN I Master clock signal input terminal 4 FS2 I Sampling frequency selection signal input terminal 5 VDDI — 6 FS1 I Sampling frequency selection signal input terminal 7 PLOCK O Internal PLL lock signal output terminal 8 VSS — Ground terminal 9 MCLK1 I 10 VDDI — Power supply terminal (+2.6V) 11 VSS — Ground terminal 12 MCLK2 O System clock signal output terminal (13.5 MHz) Master/slave selection signal input terminal Ground terminal “L”: reset Not used Not used Power supply terminal (+2.6V) Not used Not used System clock signal input terminal (13.5 MHz) 13 MS I 14 SCKOUT O Internal system clock signal output to the D/A converter and stream processor 15 LRCKI1 I L/R sampling clock signal (44.1 kHz) input from the digital audio processor 16 VDDE — 17 BCKI1 I Bit clock signal (2.8224 MHz) input from the digital audio processor 18 SDI1 I Front L-ch and R-ch audio serial data input from the digital audio processor 19 LRCKO O L/R sampling clock signal (44.1 kHz) output to the D/A converter and stream processor 20 BCKO O Bit clock signal (2.8224 MHz) output to the D/A converter and stream processor 21 VSS — Ground terminal 22 KFSIO I Audio clock signal (11.2896 MHz) input from the digital audio processor 23 SDO1 O Front L-ch and R-ch audio serial data output to the stream processor 24 SDO2 O Center and woofer audio serial data output to the stream processor 25 SDO3 O Rear L-ch and R-ch audio serial data output to the stream processor 26 SDO4 O Audio serial data output to the D/A converter 27 SPDIF O S/PDIF signal output terminal 28 LRCKI2 I L/R sampling clock signal (44.1 kHz) input from the A/D converter 29 BCKI2 I Bit clock signal (2.8224 MHz) input from the A/D converter 30 SDI2 I Center and woofer audio serial data input from the digital audio processor 31 VSS — 32 HACN O Acknowledge signal output to the system controller 33 HDIN I Write data input from the system controller 34 HCLK I Clock signal input from the system controller 35 HDOUT O Read data output to the system controller 36 HCS I Chip select signal input from the system controller 37 SDCLK O Clock signal output terminal 38 CLKEN O Clock enable signal output terminal 39 RAS O Row address strobe signal output terminal 40 VDDI — Power supply terminal (+2.6V) 41 VSS — Ground terminal 42 CAS O Column address strobe signal output terminal 43 DQM O Output terminal of data input/output mask Power supply terminal (+3.3V) Not used Ground terminal Not used Not used 44 CS0 O Chip select signal output to the S-RAM 45 WE0 O Write enable signal output to the S-RAM 92 “L”: slave, “H”: master (fixed at “L” in this set) Not used Not used Not used HCD-C770/C990 Pin No. Pin Name I/O Description 46 VDDE — 47 WMD1 I 48 VSS — 49 WMD0 I S-RAM wait mode setting terminal 50 PAGE2 O Page selection signal output terminal 51 VSS — Ground terminal 52, 53 PAGE1, PAGE0 O Page selection signal output terminal 54 BOOT I Boot mode control signal input terminal 55 BTACT O Boot mode state display signal output terminal 56 BST I Boot trap signal input from the system controller 57 MOD1 I PLL input frequency selection signal input terminal “L”: 384fs, “H”: 256fs (fixed at “H” in this set) 58 MOD0 I Mode setting terminal 59 EXLOCK I PLL lock error and data error flag input from the digital audio interface IC 60 VDDI — Power supply terminal (+2.6V) 61 VSS — Ground terminal Power supply terminal (+3.3V) S-RAM wait mode setting terminal Fixed at “H” in this set Ground terminal Fixed at “L” in this set Not used Not used Not used Not used “L”: single chip mode, “H”: use prohibition (fixed at “L” in this set) 62, 63 A17, A16 O Address signal output terminal 64 to 66 A15 to A13 O Address signal output to the S-RAM 67 GP10 O L/R sampling clock signal (44.1 kHz) output to the D/A converter and stream processor 68 GP9 O Decode signal output to the system controller 69 GP8 I Bit 1 input terminal of channel status from the digital audio interface IC 70 VDDI — Power supply terminal (+2.6V) Not used 71 VSS — Ground terminal 72 to 75 D15 to D12 I/O Two-way data bus with the S-RAM 76 VDDE — Power supply terminal (+3.3V) 77 to 80 D11 to D8 I/O Two-way data bus with the S-RAM 81 VSS — Ground terminal 82 to 85 A9, A12 to A10 O Address signal output to the S-RAM 86 TDO O Simple emulation data output terminal 87 TMS I Simple emulation data input start/end detection signal input terminal 88 XTRST I Simple emulation asychronous break input terminal 89 TCK I Simple emulation clock signal input terminal 90 TDI I Simple emulation data input terminal 91 VSS — Ground terminal 92 to 97 A8 to A3 O Address signal output to the S-RAM 98, 99 D7, D6 I/O Two-way data bus with the S-RAM 100 VDDI — Power supply terminal (+2.6V) 101 VSS — Ground terminal 102 to 105 D5 to D2 I/O Two-way data bus with the S-RAM 106 VDDE — Power supply terminal (+3.3V) 107, 108 D1, D0 I/O Two-way data bus with the S-RAM 109, 110 A2, A1 O Address signal output to the S-RAM 111 VSS — Ground terminal 112 A0 O Address signal output to the S-RAM 113 PM I PLL reset signal input from the system controller 114 SDI3 I Rear L-ch and R-ch audio serial data input from the digital audio processor Not used Not used Not used Not used Not used “L”: reset 93 HCD-C770/C990 Pin No. Pin Name I/O 115 SDI4 I Audio serial data input terminal Not used 116 SYNC I Synchronous/asychronous selection signal input terminal “L”: Synchronous, “H”: asynchronous (fixed at “H” in this set) 117 to 119 VSS — Ground terminal 120 VDDI — Power supply terminal (+2.6V) 94 Description HCD-C770/C990 • DVD BOARD IC701 CXD1882R (DVD DECODER) Pin No. Pin Name I/O Description 1, 2 D5, D6 I/O Two-way data bus with the mechanism controller 3 VSS — Ground terminal (digital system) 4 D7 I/O Two-way data bus with the mechanism controller 5 A0 I 6 VDD — Address signal input from the mechanism controller Power supply terminal (+3.3V) (digital system) 7 A1 I 8 VDD5V — 9 to 14 A2 to A7 I 15 VSS — Ground terminal (digital system) 16 XWAIT O Wait signal output terminal 17 XRD I Read strobe signal input from the mechanism controller 18 XWR I Write strobe signal input from the mechanism controller Address signal input from the mechanism controller Power supply terminal (+5V) Address signal input from the mechanism controller Not used 19 XCS I Chip select signal input from the mechanism controller 20, 21 XINT0, XINT1 O Interrupt signal output to the mechanism controller 22 VDD — Power supply terminal (+3.3V) (digital system) 23 XHRS I Not used 24 HDB7 O Stream data signal output to the DSD decoder and DVD system processor 25 VSS — Ground terminal (digital system) 26 HDB8 O Error flag signal output to the DSD decoder and DVD system processor 27 HDB6 O Stream data signal output to the DSD decoder and DVD system processor 28 VDDS — Power supply terminal (+5V) (digital system) 29 HDB9 O Not used 30 HDB5 O Stream data signal output to the DSD decoder and DVD system processor 31 HDBA O Not used 32 HDB4 O Stream data signal output to the DSD decoder and DVD system processor 33 VSS — Ground terminal (digital system) 34 HDBB O Not used 35 HDB3 O Stream data signal output to the DSD decoder and DVD system processor 36 VDD — Power supply terminal (+3.3V) (digital system) 37 HDBC O Not used 38 VDDS — Power supply terminal (+5V) (digital system) 39 HDB2 O Stream data signal output to the DSD decoder and DVD system processor 40 HDBD O Not used 41 HDB1 O Stream data signal output to the DSD decoder and DVD system processor 42 VSS — Ground terminal (digital system) 43 HDBE O Not used 44 HDB0 O Stream data signal output to the DSD decoder and DVD system processor 45 HDBF O Not used 46 XSAK O Serial data effect flag signal output to the DSD decoder and DVD system processor 47 VDDS — Power supply terminal (+5V) (digital system) 48 XDCK O Serial data transfer clock signal output to the DSD decoder and DVD system processor 49 XSHD O Header flag signal output to the DSD decoder 50 VDD — Power supply terminal (+3.3V) (digital system) 51 REDY O Not used 52 VSS — Ground terminal (digital system) 95 HCD-C770/C990 Pin No. Pin Name I/O Description 53 XSRQ I DVD mode: Serial data request signal input from the DVD system processor SACD mode: Serial data request signal input from the DSD decoder 54 HINT O Not used 55 XS16 O Not used 56 HA1 I Not used 57 XPDI I/O Not used 58 VDDS — Power supply terminal (+5V) (digital system) 59, 60 HA0, HA2 I 61 VSS — 62, 63 HCS0, HCS1 I 64 VDD — Power supply terminal (+3.3V) (digital system) 65 DASP 66 to 69 MDB0 to MDB3 Not used Ground terminal (digital system) Not used I/O Not used I/O Two-way data bus with the D-RAM 70 VSS — Ground terminal (digital system) 71 MDB4 I/O Two-way data bus with the D-RAM 72 VDD5V — Power supply terminal (+5V) I/O Two-way data bus with the D-RAM XMWR O Write enable signal output to the D-RAM 77 VDD — Power supply terminal (+3.3V) (digital system) 78 XRAS O Row address strobe signal output to the D-RAM 79, 80 MA0, MA1 O Address signal output to the D-RAM 81 VSS — Ground terminal (digital system) 82 to 87 MA2 to MA7 O Address signal output to the D-RAM 88 VDD — Power supply terminal (+3.3V) (digital system) 89 MA8 O Address signal output to the D-RAM 90 VSS — Ground terminal (digital system) 91 MA9 O Address signal output to the D-RAM 92 MNT1 O EEPROM ready signal output to the mechanism controller 93 MNT2 O Operation clock signal output for PSP physical disc mark detection to DSD decoder 94 XMOE O Output enable signal output to the D-RAM 95 XCAS O Column address strobe signal output to the D-RAM 96, 97 MDB8, MDB9 I/O Two-way data bus with the D-RAM 73 to 75 MDB5 to MDB7 76 98 VSS — Ground terminal (digital system) 99 MDBA I/O Two-way data bus with the D-RAM 100 VDD — Power supply terminal (+3.3V) (digital system) 101, 102 MDBB, MDBC I/O Two-way data bus with the D-RAM 103 VDD5V 104 to 106 MDBD to MDBF — Power supply terminal (+5V) I/O Two-way data bus with the D-RAM 107 GFS O Guard frame sync signal output to the mechanism controller 108 VSS — Ground terminal (digital system) 109 APEO O Absolute phase error signal output 110 VDD — Power supply terminal (+3.3V) (digital system) 111 DASYO O RF binary signal output 112 GNDA5 — Ground terminal (analog system) 113, 114 ASF1, AFS2 — Filter connected terminal for selection the constant asymmetry compensation 115 DASYI I 96 Analog signal input after integrated from the RF binary signal HCD-C770/C990 Pin No. Pin Name I/O 116 RFDCC I Input terminal for adjusting DC cut high-pass filter for RF signal Not used 117 RFIN I RF signal input from the DVD/CD RF amplifier 118, 119 VCCA5, VCCA4 Description — Power supply terminal (+3.3V) (analog system) 120 VCOR1 — VCO oscillating range setting resistor connected terminal 121 VCOIN I 122, 123 GNDA4, GNDA3 VCO input terminal — Ground terminal (analog system) 124 LPF5 O Signal output from the operation amplifier from PLL loop filter 125 VC1 I Middle point voltage (+1.65V) input terminal 126, 127 LPF2, LPF1 I Inverted signal input to the operation amplifier from PLL loop filter 128, 129 VCCA3, VCCA2 — Power supply terminal (+3.3V) (analog system) 130 PDO O Signal output from the charge pump for phase comparator 131 PDHVCC I Middle point voltage input terminal for RF PLL 132 FDO O Signal output from the charge pump for frequency comparator 133, 134 GNDA2, GNDA1 — Ground terminal (analog system) 135 SPO O Spindle motor control signal output 136 VC2 I Middle point voltage (+1.65V) input terminal 137 MDIN2 I Spindle motor servo drive signal input 138 MDIN1 I MDP input terminal 139 VCCA1 — Power supply terminal (+3.3V) (analog system) 140 CLVS O Control signal output for selection the spindle control filter constant at CLVS 141 VSS — Ground terminal (digital system) 142 MDSOUT O Frequency error output terminal of internal CLV circuit 143 VDD — Power supply terminal (+3.3V) (digital system) 144 MDPOUT O Phase error output terminal of internal CLV circuit 145 DEFECT I Defect signal input terminal Not used 146 GSCOR I Guard subcode sync (S0+S1) detection signal input from the digital signal processor 147 EXCK O Subcode serial data reading clock signal output to the digital signal processor 148 SBIN I Subcode serial data input from the digital signal processor 149 VSS — 150 SCOR I Subcode sync (S0+S1) detection signal input from the digital signal processor 151 WFCK I Write frame clock signal input from the digital signal processor 152 VDD5V — 153 XRCI I 154 VDDS — 155 C2PO I 156 VDD — Power supply terminal (+3.3V) (digital system) 157 DBCK O Bit clock signal (2.8224 MHz) output terminal Not used 158 BCLK I Bit clock signal (2.8224 MHz) input from the digital signal processor 159 DDAT O PCM data output terminal Not used 160 MDAT I Serial data input from the digital signal processor 161 VSS — Ground terminal (digital system) 162 DLRC O L/R sampling clock signal (44.1 kHz) output terminal Not used 163 LRCK I L/R sampling clock signal (44.1 kHz) input from the digital signal processor 164 XRST I Reset signal input from the mechanism controller “L”: reset 165 IFS0 I Interface selection signal input terminal Fixed at “L” in this set 166 IFS1 I Interface selection signal input terminal Fixed at “H” in this set Ground terminal (digital system) Power supply terminal (+5V) RAM overflow signal input terminal Not used Power supply terminal (+5V) (digital system) C2 pointer signal input from the digital signal processor 97 HCD-C770/C990 Pin No. Pin Name I/O 167 XTAL I 168 VSS — Ground terminal (digital system) 169 XTA2 O System clock output terminal (33.8688 MHz) 170 XTA1 I System clock input terminal (33.8688 MHz) 171 VDD — Power supply terminal (+3.3V) (digital system) 172 to 176 D0 to D4 I/O Two-way data bus with the mechanism controller 98 Description 33.8688 MHz clock signal input terminal HCD-C770/C990 • DVD BOARD IC801 CXD2752R (DSD DECODER) Pin No. Pin Name I/O 1 VSCA0 — Description Ground terminal (for core) 2 XMSLAT I Serial data latch pulse signal input from the mechanism controller 3 MSCK I Serial data transfer clock signal input from the mechanism controller 4 MSDATI I Serial data input from the mechanism controller 5 VDCA0 — Power supply terminal (+2.5V) (for core) 6 MSDATO O Serial data output to the mechanism controller 7 MSREADY O Ready signal output to the mechanism controller 8 XMSDOE O Serial data output enable signal output terminal “L”: ready Not used 9 XRST I Reset signal input from the mechanism controller 10 SMUTE I Soft muting on/off control signal input from the mechanism controller 11 MCKI I Master clock signal (33.8688 MHz) input 12 VSIOA0 — Ground terminal (for I/O) 13 EXCKO1 O Master clock signal (33.8688 MHz) output to the digital audio processor 14 EXCKO2 O External clock 2 signal output terminal 15 LRCK O L/R sampling clock signal (44.1kHz) output terminal 16 F75HZ O Not used 17 VDIOA0 — Power supply terminal (+3.3V) (for I/O) O Monitor signal output terminal I Clock signal input from the DVD system processor Serial data input from the DVD system processor 18 to 25 MNT0 to MNT7 26 TCK “H”: muting on Not used Not used Not used 27 TDI I 28 VSCA1 — Ground terminal (for core) 29 TDO O Serial data output to the DVD system processor 30 TMS I MS signal input from the DVD system processor 31 TRST I Reset signal input from the DVD system processor I Input terminal for the test (normally: fixed at “L”) 32 to 34 TEST1 to TEST3 “L”: reset 35 VDCA1 — Power supply terminal (+2.5V) (for core) 36 UBIT O Not used 37 XBIT O Not used 38 to 41 SUPDT0 to SUPDT3 O Supplementary data output terminal 42 VSIOA1 — Ground terminal (for I/O) 43, 44 SUPDT4, SUPDT5 O Supplementary data output terminal 45 VDIOA1 — Power supply terminal (+3.3V) (for I/O) 46, 47 SUPDT6, SUPDT7 O Supplementary data output terminal 48 SUPEN O Supplementary data enable signal output terminal 49 VSCA2 — Ground terminal (for core) 50 NC O Not used 51, 52 TEST4, TEST5 I Input terminal for the test (normally: fixed at “L”) 53 NC O Not used “L”: reset Not used Not used Not used Not used 54 VDCA2 — Power supply terminal (+2.5V) (for core) 55, 56 NC O Not used 57 BCKASL I Input/output selection signal input terminal of bit clock signal (2.8224 MHz) for DSD data output “L”: input (slave), “H”: output (master) Fixed at “H” in this set 58 VSDSD0 — Ground terminal (for DSD data output) 59 BCKAI I Bit clock signal (2.8224 MHz) input terminal for DSD data output 60 BCKAO O Bit clock signal (2.8224 MHz) output terminal for DSD data output Not used Not used 99 HCD-C770/C990 Pin No. Pin Name I/O Description 61 PHREFI I Bit clock signal (2.8224 MHz) input terminal for DSD data output 62 PHREFO O Bit clock signal (2.8224 MHz) output to the digital audio processor 63 ZDFL O Front L-ch Zero data flag detection signal output terminal 64 DSAL O Front L-ch DSD data output to the digital audio processor 65 ZDFR O Front R-ch Zero data flag detection signal output terminal 66 DSAR O Front R-ch DSD data output to the digital audio processor 67 VDDSD0 — Power supply terminal (+3.3V) (for DSD data output) 68 ZDFC O Center zero data flag detection signal output terminal 69 DSAC O Center DSD data output to the digital audio processor 70 ZDFLFE O Woofer zero data flag detection signal output terminal 71 DSALFE O Woofer DSD data output to the digital audio processor 72 VSDSD1 — Ground terminal (for DSD data output) 73 ZDFLS O Rear L-ch zero data flag detection signal output terminal 74 DSALS O Rear L-ch DSD data output to the digital audio processor 75 ZDFRS O Rear R-ch zero data flag detection signal output terminal 76 DSARS O Rear R-ch DSD data output to the digital audio processor 77 VDDSD — Power supply terminal (+3.3V) (For DSD data output) 78, 79 IOUT0, IOUT1 O Data output terminal for IEEE 1394 link chip interface 80 VSCB0 — Ground terminal (for core) 81, 82 IOUT2, IOUT3 O Data output terminal for IEEE 1394 link chip interface Not used Not used Not used Not used Not used Not used Not used Not used Not used 83 VDCB0 — Power supply terminal (+2.5V) (for core) 84, 85 IOUT4, IOUT5 O Data output terminal for IEEE 1394 link chip interface 86 VSIOB0 — Ground terminal (for I/O) 87 IANCO O Transmission information data output terminal for IEEE 1394 link chip interface 88 IFULL I Data transmission hold request signal input terminal for IEEE 1394 link chip interface High speed transmission request signal input terminal for IEEE 1394 link chip interface Not used Not used 89 IEMPTY I 90 VDIOB0 — Power supply terminal (+3.3V) (for I/O) 91 IFRM O Frame reference signal output terminal for IEEE 1394 link chip interface 92 IOUTE O Enable signal output terminal for IEEE 1394 link chip interface 93 IBCK O Data transmission clock signal output terminal for IEEE 1394 link chip interface 94 VSCB1 — Ground terminal (for core) 95 IERR I Not used 96 IANCI I Not used 97 IPLAN I Not used 98 IHOLD O Not used 99 VDCB1 — Power supply terminal (+2.5V) (for core) 100 IVLD I Not used I Not used 101 to 105 IDIN0 to IDIN4 106 VSIOB1 107 to 109 IDIN5 to IDIN7 110 VDIOB1 111 to 114 WAD0 to WAD3 — I — I — 117 to 120 WAD4 to WAD7 121 100 VDCB2 Not used Power supply terminal (+3.3V) (for I/O) Input terminal for the test (normally: fixed at “L”) TESTI VSCB2 I — Not used Ground terminal (for I/O) External A/D data input terminal for PSP physical disc mark detection 116 Not used Ground terminal (for core) External A/D data input terminal for PSP physical disc mark detection Power supply terminal (+2.5V) (for core) Not used Not used I 115 Not used Not used Not used HCD-C770/C990 Pin No. Pin Name I/O 122 WRFD I Not used 123 WCK I Operation clock signal input for PSP physical disc mark detection from the DVD decoder 124, 125 WAVDD0, WAVDD1 — 126 WARFI I Analog RF signal input for PSP physical disc mark detection from the DVD/CD RF amplifier 127 WAVRB I A/D bottom reference terminal for PSP physical disc mark detection 128, 129 WAVSS0, WAVSS1 Description A/D power supply terminal (+2.5V) (for PSP physical disc mark detection) — A/D ground terminal (for PSP physical disc mark detection) 130 VSIO — Ground terminal (for I/O) 131 to 134 DQ7 to DQ4 I/O Two-way data bus with the SD-RAM 135 VDIOA2 — Power supply terminal (+3.3V) (for I/O) 136 to 139 DQ3 to DQ0 I/O Two-way data bus with the SD-RAM 140 VSIOA3 — Ground terminal (for I/O) 141 DCLK O Clock signal output to the SD-RAM 142 DCKE O Clock enable signal output to the SD-RAM 143 XWE O Write enable signal output to the SD-RAM 144 XCAS O Column address strobe signal output to the SD-RAM 145 XRAS O Row address strobe signal output to the SD-RAM 146 VDIOA3 — Power supply terminal (+3.3V) (for I/O) 147 NC O Not used 148, 149 A11, A10 O Address signal output to the SD-RAM 150 VSCA3 — Ground terminal (for core) 151, 152 A9, A8 O Address signal output to the SD-RAM 153 VDCA3 — Power supply terminal (+2.5V) (for core) 154 to 157 A7 to A4 O Address signal output to the SD-RAM 158 VSIOA4 — Ground terminal (for I/O) 159 to 162 A3 to A0 O Address signal output to the SD-RAM 163 VDIOA4 — Power supply terminal (+3.3V) (for I/O) 164 XSRQ O Serial data request signal output to the DVD decoder 165 XSHD I Header flag signal input from the DVD decoder 166 SDCK I Serial data transfer clock signal input from the DVD decoder 167 XSAK I Serial data effect flag signal input from the DVD decoder 168 SDEF I Error flag signal input from the DVD decoder 169 to 176 SD0 to SD7 I Stream data signal input from the DVD decoder 101 HCD-C770/C990 • DVD BOARD IC901 µPD703033BYGF-M01-3BA (SYSTEM CONTROLLER) Pin No. Pin Name I/O 1 DAMP-DATA O Description Serial data output to the stream processors 2 DAMP-CLK O Serial data transfer clock signal output to the stream processors 3 I2C-DATA I/O Communication data bus with the DVD system processor and mechanism controller 4 CQ-RST O Reset signal output to the DVD system processor 5 I2C-CLK I/O Communication data reading clock signal input or transfer clock signal output with the DVD system processor and mechanism controller 6 DSP-DO I Write data input from the audio digital signal processor 7 DIG-DI O Read data output to the digital audio interface IC, audio digital signal processor and D/A converter 8 DIG-CLK O Clock signal output to the digital audio interface IC, audio digital signal processor and D/A converter 9 EVDD — Power supply terminal (+5V) 10 EVSS — Ground terminal 11 P-PWM O PWM voltage control signal output 12 DSP-RST O Reset signal output to the audio digital signal processor 13 DSP-PM O PLL reset signal output to the audio digital signal processor 14 DSP-CS O Chip select signal output to the audio digital signal processor 15 DSP-HACN I Acknowledge signal input from to the audio digital signal processor 16 DSP-BST O Boot trap signal output to the audio digital signal processor 17 DSP-GP9 I Decode signal input from to the audio digital signal processor 18 DIR-ZERO I Audio serial data input from the digital audio interface IC 19 DIR-ERR I PLL lock error and data error flag input from the digital audio interface IC “L”: reset “L”: reset “L”: reset 20 DIR-CE O Chip enable signal output to the digital audio interface IC 21 VPP — Power supply terminal (for programming) 22 DIR-XST I Source clock switching monitor input from the digital audio interface IC 23 DIR-AD O Not used 24 DIR-XMODE I System reset signal input from the digital audio interface IC 25 DI I Write data input from the digital audio interface IC 26 DAMP-RST O Reset signal output to the stream processors 27 DAMP-MUTEG O Muting on/off control signal output to the stream processors “H”: muting on 28 DAMP-MUTEN O Muting on/off control signal output to the stream processors “H”: muting on 29 CS1 O Chip select signal output to the stream processor (for front L-ch and R-ch) 30 CS2 O Chip select signal output to the stream processor (for center and woofer) Not used “L”: reset “L”: reset 31 CS3 O Chip select signal output to the stream processor (for rear L-ch and R-ch) 32 DAC-CS O Chip select signal output to the D/A converter 33 AD-RST O Reset signal output to the A/D converter and D/A converter 34 RESET I System reset signal input “L”: reset For several hundreds msec. after the power supply rises, “L” is input, then it changes to “H” 35 XT1 I Sub system clock input terminal 36 XT2 O Sub system clock output terminal 37 REG0 — Not used 38 X2 O Main system clock output terminal (20 MHz) Main system clock input terminal (20 MHz) 39 X1 I 40 VSS — Ground terminal 41 VDD — Power supply terminal (+5V) 42 CLKOUT O Clock signal output terminal 102 Not used Not used Not used “L”: reset HCD-C770/C990 Pin No. Pin Name I/O Description 43 DIP-RST O Reset signal output to the power amplifier 44 DIP-OCP I Protect signal input from the power amplifier 45 ST-POWER O System power on/off control signal output 46 HP-MUTE O Headphone muting on/off control signal output 47 AU-MUTE O Audio line muting on/off control signal output 48 AV-SEL2 O Audio/video selection signal output 49 PROG SW I SCAN SELECT switch input terminal 50 TU-ON O Power supply for tuner pack on/off control signal output “L”: reset “H”: power on “L”: muting on “L”: muting on “L”: SELECTABLE, “H”: INTERLACE 51 TUNED I Tuning detection signal input from the tuner unit 52 TUN-DI I Serial data input from the tuner unit 53 TUN-CE O Chip enable signal output to the tuner unit 54 TUN-DO O Serial data output to the tuner unit 55 TUN-CLK O Serial data transfer clock signal output to the tuner unit 56 FL-MUTE O Reset signal output to the fluorescent indicator tube driver 57 FL-CLK O Serial data transfer clock signal output to the LED driver and fluorescent indicator tube driver 58 BVDD — Power supply terminal (+5V) (for bus interface) 59 BVSS — Ground terminal (for bus interface) 60 FL-DATA O Serial data output to the LED driver and fluorescent indicator tube driver “L”: tuned “L”: reset 61 FL-CS O Chip select signal output to the fluorescent indicator tube driver 62 LED-CS O Standby signal output to the LED driver 63 LED-CLR O Reset signal output to the LED driver 64 HPSW I Connection detection signal input of the headphone jack “L”: no connected, “H”: headphone connected 65 DFIL RST2 O Reset signal output to the digital audio processor 66 SP RELAY O Relay drive signal output terminal for the speaker protect 67 PARA-DO2 I Serial data input from the changer controller (rotary encoder) 68 PARA-RST O Reset signal output to the changer controller (motor, switch) and changer controller (rotary encoder) “L”: reset 69 PARA-LT1 O Serial data latch pulse signal output to the changer controller (motor, switch) “L” active “L”: standby “L”: reset “L”: reset Not used 70 PARA-LT2 O Serial data latch pulse signal output terminal 71 PARA-CLK O Serial data transfer clock signal output to the changer controller (motor, switch) 72 PARA-DATA O Serial data output to the changer controller (motor, switch) 73 PARA-DO1 I Serial data input terminal 74 AVDD — Power supply terminal (+5V) (analog system) 75 AVSS — Ground terminal (analog system) 76 AVREF I 77 NO USE — Not used 78 OPT-SEN2 I Not used 79 OPT-SEN I Disc insert detection signal input from the disc sensor 80 AREA1 I Destination setting terminal 81 SEN2 I Disc loading detection signal input 82 to 84 KEY0 to KEY2 I Key input terminal (A/D input) 85 EN-A I Jog dial pulse input from the rotary encoder (A phase input) 86 EN-B I Jog dial pulse input from the rotary encoder (B phase input) 87 MODEL I Model setting terminal 88 RDS-DATA I RDS serial data input from the RDS decoder (Used for the AEP model) 89 DVD-POWER O DVD power on/off control signal output 90 STOP I System stop signal input Not used Not used Reference voltage (+5V) input terminal (analog system) “H”: power on 103 HCD-C770/C990 Pin No. Pin Name I/O Description 91 POWER-SW I System power on/off control signal input “H”: power on 92 SIRCS I Remote control signal input 93 WAKE I System wake up signal input by pressing any key on the front panel or remote commander or disc insert detect sensor 94 RDS-CLK I RDS serial data transfer clock signal input from the RDS decoder (Used for the AEP model) 95 AV-SEL0 O Audio/video selection signal output 96 AV-SEL1 O Audio/video selection signal output 97 DF-SW O selection signal output to the digital audio processor 98 DF-SYNC O Sync signal output to the digital audio processor 99 DF-RST O Reset signal output for the digital audio processor 100 I2HLP I/O Busy signal input/output for the I2C bus 104 “L”: reset Not used HCD-C770/C990 • DVD BOARD IC902 PT3000 (CHANGER CONTROLLER (MOTOR, SWITCH) ) Pin No. Pin Name I/O Description 1 VSS — 2 RESET I Reset signal input from the system controller 3 CLK I Serial data transfer clock signal input from the system controller 4 LAT I Serial data latch pulse signal input from the system controller 5 P15 I Disc insert (8/12cm) detect switch input terminal “L”: disc insert 6 P14 I Disc insert (12cm) detect switch input terminal “L”: disc insert Not used 7 P13 I Disc in (8/12cm) detect switch input terminal “L”: play position 8 P12 I Disc in (12cm) detect switch input terminal “L”: play position 9 P11 I Stocker in/out detect switch input terminal “L”: in the midst disc is moving between play position and stocker except the moment disc in/out from stocker 10 P10 I Disc position detect switch input terminal “L”: disc is play position side in the midst disc is moving between play position and stocker, “H”: disc is stocker side in the midst disc is moving between play position and stocker 11 P9 I Disc out detect switch input terminal “H”: disc out from play position 12 P8 I Stocking detect switch input terminal “H”: in the midst disc is moving between play position and stocker 13 LATCHO O Serial data latch pulse signal output to the changer controller (rotary encoder) 14 CLKO O Serial data transfer clock signal output to the changer controller (rotary encoder) 15 DO1 O Serial data output to the changer controller (rotary encoder) 16 DI2 I Serial data input terminal Not used 17, 18 P7, P6 O Not used 19, 20 P5, P4 O Elevator up/down motor drive control signal output 21, 22 P3, P2 O Rollar motor drive control signal output 23, 24 P1, P0 O Loading motor drive control signal output 25 DO2 O Serial data output to the changer controller (rotary encoder) 26 DI1 I Serial data input from the system controller 27 PULLUP — Connected to power supply (+5V) 28 VCC — Power supply terminal (+5V) Ground terminal “L”: reset 105 HCD-C770/C990 • DVD BOARD IC906 PT3000 (CHANGER CONTROLLER (ROTARY ENCODER) ) Pin No. Pin Name I/O Description 1 VSS — 2 RESET I Reset signal input from the system controller 3 CLK I Serial data transfer clock signal input from the changer controller (motor, switch) 4 LAT I Serial data latch pulse signal input from the changer controller (motor, switch) 5 to 8 P15 to P12 I Stocker position detect rotary encoder input terminal Ground terminal “L”: reset 9 to 12 P11 to P8 I Mode detect rotary encoder input terminal 13 LATCHO O Serial data latch pulse signal output terminal Not used 14 CLKO O Serial data transfer clock signal output terminal Not used 15 DO1 O Serial data output terminal Not used 16 DI2 I Serial data input from the changer controller (motor, switch) 17 to 24 P7 to P0 O Not used 25 DO2 O Serial data output to the system controller Serial data input from the changer controller (motor, switch) 26 DI1 I 27 PULLUP — Connected to power supply (+5V) 28 VCC — Power supply terminal (+5V) 106 HCD-C770/C990 SECTION 8 EXPLODED VIEWS NOTE: • -XX and -X mean standardized parts, so they may have some difference from the original one. • Color Indication of Appearance Parts Example: KNOB, BALANCE (WHITE) . . . (RED) ↑ ↑ Parts Color Cabinet's Color 8-1. • Items marked “*” are not stocked since they are seldom required for routine service. Some delay should be anticipated when ordering these items. • Abbreviation AUS : Australian model CND : Canadian model The components identified by mark 0 or dotted line with mark 0 are critical for safety. Replace only with part number specified. Les composants identifiés par une marque 0 sont critiquens pour la sécurité. Ne les remplacer que par une pièce portant le numéro spécifié. GENERAL SECTION front panel section-1 #1 #1 mechanism deck section-1 (CDM69-DVBU16) #1 1 #1 #1 chassis section-1 #1 2 Ref. No. 1 2 Part No. Description 4-240-373-01 SIDE PANEL (L) 4-240-374-01 SIDE PANEL (R) Remark Ref. No. #1 Part No. Description Remark 7-685-646-79 SCREW +BVTP 3X8 TYPE2 IT-3 107 HCD-C770/C990 8-2. FRONT PANEL SECTION-1 front panel section-2 #1 54 not supplied 55 #1 #1 53 56 57 51 52 not supplied 58 supplied with S800 Ref. No. 51 52 53 54 55 108 Part No. Description 4-240-382-01 4-240-383-01 1-685-068-11 A-4676-963-A 1-685-084-11 CD BUTTON BAND BUTTON CONTROL BOARD DDCON BOARD, COMPLETE VOL BOARD Remark Ref. No. 56 57 58 58 #1 Part No. Description 2-626-294-01 1-685-083-11 4-240-024-01 X-4952-564-1 7-685-646-79 SCREW (+ PTPWH) (2.6X7) HP BOARD KNOB VOLUME (C770) KNOB (VOL) ASSY (C990) SCREW +BVTP 3X8 TYPE2 IT-3 Remark HCD-C770/C990 8-3. FRONT PANEL SECTION-2 107 #1 #7 #1 not supplied (power LED board) 106 #1 108 109 103 #1 FL801 111 105 110 104 101 102 Ref. No. Part No. Description 101 102 103 104 105 X-4954-740-3 X-4954-729-2 4-240-402-01 1-824-479-11 1-685-082-11 WINDOW SUB ASSY LID SUB ASSY, CD FL HOLDER FLEXIBLE FLAT CABLE (10 CORE) FL BOARD 106 107 107 X-4954-736-1 POWER SUB ASSY 4-240-372-01 FRONT PANEL (AL) (C770) 4-241-536-01 PANEL (AL), FRONT (C990) Remark Ref. No. Part No. Description 108 109 110 111 FL801 X-4954-734-1 A-4728-876-A 1-824-478-11 4-931-757-31 1-518-824-11 PLAY BUTTON SUB ASSY KEY BOARD, COMPLETE FLEXIBLE FLAT CABLE (12 CORE) SCREW (DIA.2.6X8) (IT3B), TAPPING INDICATOR TUBE, FLUORESCENT #1 #7 7-685-646-79 SCREW +BVTP 3X8 TYPE2 IT-3 7-685-246-14 SCREW +KTP 3X8 TYPE2 NON-SLIT Remark 109 HCD-C770/C990 8-4. CHASSIS SECTION-1 #1 not supplied not supplied (SEL board) #2 #1 152 not supplied not supplied (power SW board) #1 chassis section-2 151 153 #1 Ref. No. 151 152 153 110 Part No. Description X-4954-745-1 FOOT SUB ASSY 4-240-397-01 POWER BUTTON 4-240-410-01 FOOT Remark Ref. No. #1 #2 Part No. Description 7-685-646-79 SCREW +BVTP 3X8 TYPE2 IT-3 7-685-545-14 SCREW +BTP 3X6 TYPE2 N-S Remark HCD-C770/C990 8-5. CHASSIS SECTION-2 F901 #1 #1 #1 #1 #1 not supplied 211 210 202 not supplied 205 204 203 not supplied #1 201 207 208 #1 212 206 209 chassis section-3 The components identified by mark 0 or dotted line with mark 0 are critical for safety. Replace only with part number specified. Ref. No. Part No. Description 201 202 203 203 203 1-824-626-11 1-824-483-11 A-4676-951-A A-4729-049-A A-4730-636-A FLEXIBLE FLAT CABLE (19 CORE) FLEXIBLE FLAT CABLE (28 CORE) DVD BOARD, COMPLETE (C770: US, CND) DVD BOARD, COMPLETE (C990) DVD BOARD, COMPLETE (C770: AEP) Remark 203 204 205 206 207 A-4730-646-A 1-824-478-11 1-824-625-11 1-500-657-11 1-824-480-11 DVD BOARD, COMPLETE (C770: AUS) FLEXIBLE FLAT CABLE (12 CORE) FLEXIBLE FLAT CABLE (17 CORE) CORE, FERRITE FLEXIBLE FLAT CABLE (29 CORE) 208 1-824-481-11 FLEXIBLE FLAT CABLE (14 CORE) Ref. No. 209 210 210 210 211 211 212 0 F901 0 F901 #1 Les composants identifiés par une marque 0 sont critiques pour la sécurité. Ne les remplacer que par une pièce portant le numéro spécifié. Part No. Description 1-824-482-11 A-4676-957-A A-4729-053-A A-4730-639-A A-4676-968-A FLEXIBLE FLAT CABLE (29 CORE) POWER BOARD, COMPLETE (C770: US, CND) POWER BOARD, COMPLETE (C990) POWER BOARD, COMPLETE (AEP, AUS) AMP BOARD, COMPLETE (US, CND) Remark A-4730-644-A AMP BOARD, COMPLETE (AEP, AUS) 1-469-854-11 CORE, FERRITE 1-533-453-11 FUSE, GLASS TUBE (DIA. 5) (5A/125V) (US, CND) 1-533-470-11 FUSE, GLASS TUBE (DIA. 5) (15A/250V) (AEP, AUS) 7-685-646-79 SCREW +BVTP 3X8 TYPE2 IT-3 111 HCD-C770/C990 8-6. CHASSIS SECTION-3 not supplied #1 252 #1 #1 256 251 #3 255 #1 not supplied M301 253 #1 254 258 not supplied 257 not supplied The components identified by mark 0 or dotted line with mark 0 are critical for safety. Replace only with part number specified. Ref. No. Part No. Description 251 252 0 253 0 253 0 253 A-4728-874-A 1-824-485-11 1-783-531-72 1-696-169-12 1-696-848-42 VIDEO BOARD, COMPLETE FLEXIBLE FLAT CABLE (11 CORE) CORD, POWER (US, CND) CORD, POWER (AEP) CORD, POWER (AUS) 254 255 255 256 4-217-350-11 A-4728-875-A A-4730-641-A 4-931-757-31 STOPPER, CORD AUDIO BOARD, COMPLETE (EXCEPT AEP) AUDIO BOARD, COMPLETE (AEP) SCREW (DIA. 2.6X8) (IT3B), TAPPING 112 Remark Ref. No. 257 258 Part No. Les composants identifiés par une marque 0 sont critiques pour la sécurité. Ne les remplacer que par une pièce portant le numéro spécifié. Description Remark M301 #1 1-824-623-11 FLEXIBLE FLAT CABLE (11 CORE) A-4730-139-A TUNER BOARD, COMPLETE (DTP-001) (AEP, AUS) A-4730-141-A TUNER BOARD, COMPLETE (DTP-001) (US, CND) 1-763-861-11 FAN, DC 7-685-646-79 SCREW +BVTP 3X8 TYPE2 IT-3 #3 7-685-659-14 SCREW +BVTP 4X8 TYPE2 N-S 258 HCD-C770/C990 8-7. MECHANISM DECK SECTION-1 (CDM69-DVBU16) 305 304 302 #4 S702 303 #4 301 306 M781 308 309 mechanism deck section-2 307 310 302 #4 Ref. No. Part No. Description 301 302 303 304 305 1-685-006-11 4-951-620-01 4-239-690-01 4-239-618-01 X-4954-628-1 STOCKER MOTOR BOARD SCREW (2.6X8), +BVTP CAM (STOCKER U/D) SCREW (+PWH, 2X6), STEP TAPPING STOCKER ASSY 306 307 4-239-687-01 GEAR (STOCKER COMMUNICATION) A-4728-700-A RELAY BOARD, COMPLETE Remark Ref. No. Part No. Description Remark 308 309 310 M781 S702 4-239-689-01 4-239-698-01 4-240-035-01 A-4735-953-A 1-477-299-11 GEAR (STOCKER DECELERATION) PULLEY (STOCKER) BELT (STOCKER) MOTOR (STOCKER) ASSY (STOCKER) ENCODER, ROTARY (STOCKER POSITION) #4 7-685-902-21 SCREW +PTPWH 2.6X8 (TYPE2) 113 HCD-C770/C990 8-8. MECHANISM DECK SECTION-2 (CDM69-DVBU16) 352 353 354 355 #5 355 351 mechanism deck section-3 mechanism deck section-4 356 optical pick-up (DVBU16) Ref. No. 351 352 353 354 114 Part No. Description 1-685-008-11 1-685-009-11 1-685-010-11 1-685-011-11 SW BOARD (1) SW BOARD (2) SW BOARD (3) SW BOARD (4) Remark Ref. No. 355 356 #5 Part No. Description 4-951-620-01 SCREW (2.6X8), +BVTP 4-985-672-01 SCREW (+PTPWHM 2.6), FLOATING 7-685-533-14 SCREW +BTP 2.6X6 TYPE2 N-S Remark HCD-C770/C990 8-9. MECHANISM DECK SECTION-3 (CDM69-DVBU16) 407 not supplied 406 not supplied not supplied 405 409 410 405 413 not supplied 411 420 409 408 415 402 413 412 not supplied 405 414 415 416 not supplied 404 418 403 417 404 419 402 402 418 not supplied 402 401 Ref. No. Part No. Description Part No. Description 401 402 403 404 405 4-240-038-01 4-992-069-01 4-239-648-01 4-239-646-01 4-239-641-01 PULLEY (A), CHUCKING SCREW (+PTPWH) (M2) (DIA. 7) PARASOL (ROLLER) ROLLER (ROLLER) SPRING (1.2), TENSION Remark 411 412 413 414 415 4-239-651-01 4-239-640-01 4-240-040-01 4-240-039-01 4-239-702-01 ROLLER (STOCKER), RUBBER PINION (SLIDER) SPRING (DISC STOPPER), TORSION LEVER (DISC STOPPER) ROLLER (DISC STOPPER) 406 407 408 409 410 4-239-642-01 4-239-679-01 4-240-037-01 4-239-649-01 4-241-209-01 SPRING (3), TENSION COIL SPRING (5), TENSION COIL PULLEY (B), CHUCKING PARASOL (STOCKER) SHEET, ADHESIVE 416 417 418 419 420 4-985-672-01 4-239-650-01 4-239-647-01 4-239-645-01 4-241-599-01 SCREW (+PTPWHM 2.6), FLOATING LEVER (LIFTER) PARASOL (MAIN) ROLLER, RUBBER LEVER (SUPPORT) Ref. No. Remark 115 HCD-C770/C990 8-10. MECHANISM DECK SECTION-4 (CDM69-DVBU16) #6 457 #6 457 458 454 457 454 458 457 453 456 455 455 #6 457 457 452 458 470 #6 467 468 453 456 456 454 451 452 457 463 461 465 457 455 461 452 461 460 464 453 not supplied 465 457 456 470 455 456 458 469 471 462 #6 #6 451 461 466 466 472 454 455 453 452 not supplied (roller motor board) 451 M771 mechanism deck section-5 Ref. No. Part No. Description Part No. Description 451 452 453 454 455 X-4954-626-1 4-239-666-01 4-239-668-01 4-239-652-01 4-239-669-01 LEVER (ROLLER) ASSY GEAR LEVER (CENTER) SCREW (ROLLER), STEP GEAR (ROLLER COMMUNICATION) 464 465 466 467 468 4-240-981-01 4-240-041-01 4-951-620-01 4-241-467-01 4-239-651-01 SPRING (BASE SLIDER 5),TENSION SPRING (SLIDER 2), TENSION SCREW (2.6X8), +BVTP ROLLER (S), RUBBER ROLLER (STOCKER) RUBBER 456 457 458 460 461 4-239-667-01 4-239-647-01 4-239-645-01 X-4954-622-1 4-239-670-01 GEAR (ROLLER CENTER) PARASOL (MAIN) ROLLER, RUBBER BASE (SLIDER 2) ASSY GEAR (ROLLER 5 COMMUNICATION) 469 470 471 472 M771 4-241-209-01 4-239-649-01 4-239-671-01 X-4954-627-1 A-4735-953-A SHEET, ADHESIVE PARASOL (STOCKER) GEAR (ROLLER 5 CENTER) BASE (SLIDER 5) ASSY MOTOR (STOCKER) ASSY (ROLLER) 462 463 X-4954-624-A LEVER (SLIDER 4) ASSY 4-992-069-01 SCREW (+PTPWH) (M2) (DIA. 7) #6 7-623-921-01 WASHER 1.7, NYRON 116 Remark Ref. No. Remark HCD-C770/C990 8-11. MECHANISM DECK SECTION-5 (CDM69-DVBU16) 504 503 505 503 505 501 502 506 509 mechanism deck section-6 507 508 #4 Ref. No. 501 502 503 504 505 Part No. Description 4-240-020-01 4-239-708-01 4-239-697-01 X-4954-629-1 4-239-706-01 GEAR (TIMING) BELT (FRONT), TIMING GEAR (CENTER) SLIDER (MODE CAM) ASSY BELT (REAR), TIMING Remark Ref. No. 506 507 508 509 #4 Part No. Description 4-239-699-01 4-239-681-01 4-227-899-01 4-239-686-01 7-685-902-21 PULLEY BELT (ROLLER) SCREW (DIA. 12), FROATING GEAR (ROLLER DECELERATION) SCREW +PTPWH 2.6X8 (TYPE2) Remark 117 HCD-C770/C990 8-12. MECHANISM DECK SECTION-6 (CDM69-DVBU16) 563 not supplied (mode motor board) not supplied 565 M761 551 #4 #4 554 555 #4 #4 556 #4 553 558 564 569 560 570 568 557 #4 559 562 563 #4 552 #4 #4 S771 567 563 563 561 571 566 #4 Ref. No. Part No. Description Part No. Description 551 552 553 554 555 4-239-693-01 1-685-004-11 4-239-696-01 4-239-695-02 4-240-018-01 CAM (GEAR) SENSOR BOARD GEAR (EJECT LOCK) CAM (EJECT LOCK) GEAR (MODE 4) 563 564 565 566 567 4-951-620-01 4-239-692-01 4-239-694-01 4-241-731-01 4-241-732-01 SCREW (2.6X8), +BVTP CAM (BU U/D) GEAR (MODE CAM) SHUTTER (A), LEVER SHUTTER (B), LEVER 556 557 558 559 560 4-240-019-01 4-239-700-01 4-239-683-01 4-239-682-01 4-239-688-01 GEAR (MODE 5) GEAR (MODE 2) PULLEY (MODE DECELERATION) BELT (MODE) GEAR (MODE 3) 568 569 570 571 M761 4-241-733-01 4-241-734-01 4-241-735-01 4-227-899-01 A-4735-953-A BASE (SHUTTER) SHAFT (SHUTTER) SPRING (SHUTTER), COMPRESSION SCREW (DIA.12), FLOATING MOTOR (STOCKER) ASSY (MODE) 561 562 4-239-618-01 SCREW (+PWH, 2X6), STEP TAPPING 4-239-684-01 GEAR (MODE 1) S771 #4 1-477-300-11 ENCODER, ROTARY (MODE) 7-685-902-21 SCREW +PTPWH 2.6X8 (TYPE2) 118 Remark Ref. No. Remark HCD-C770/C990 8-13. OPTICAL PICK-UP SECTION (DVBU16) 601 601 603 602 602 601 605 #5 602 604 606 The components identified by mark 0 or dotted line with mark 0 are critical for safety. Replace only with part number specified. Ref. No. Part No. Description 601 602 0 603 604 4-981-923-01 3-053-847-31 1-477-263-11 A-4728-690-A SCREW (M), STEP INSULATOR PICKUP UNIT (TDP022W) RF BOARD, COMPLETE Remark Ref. No. 605 606 #5 Part No. Les composants identifiés par une marque 0 sont critiques pour la sécurité. Ne les remplacer que par une pièce portant le numéro spécifié. Description Remark 1-685-250-11 FLEXIBLE BOARD 4-239-703-01 HOLDER (DBU1) 7-685-533-14 SCREW +BTP 2.6X6 TYPE2 N-S 119 HCD-C770/C990 SECTION 9 ELECTRICAL PARTS LIST AMP NOTE: • Due to standardization, replacements in the parts list may be different from the parts specified in the diagrams or the components used on the set. • -XX and -X mean standardized parts, so they may have some difference from the original one. • RESISTORS All resistors are in ohms. METAL: Metal-film resistor. METAL OXIDE: Metal oxide-film resistor. F: nonflammable • Abbreviation AUS : Australian model CND : Canadian model Ref. No. Part No. • Items marked “*” are not stocked since they are seldom required for routine service. Some delay should be anticipated when ordering these items. • SEMICONDUCTORS In each case, u: µ, for example: uA. . : µA. . uPA. . : µPA. . uPB. . : µPB. . uPC. . : µPC. . uPD. . : µPD. . • CAPACITORS uF: µF • COILS uH: µH Description Remark Part No. Les composants identifiés par une marque 0 sont critiquens pour la sécurité. Ne les remplacer que par une pièce portant le numéro spécifié. When indicating parts by reference number, please include the board. Description Remark A-4676-968-A AMP BOARD, COMPLETE (US, CND) A-4730-644-A AMP BOARD, COMPLETE (AEP, AUS) ******************** C162 C163 C164 1-115-339-11 CERAMIC CHIP 1-115-339-11 CERAMIC CHIP 1-115-339-11 CERAMIC CHIP 0.1uF 0.1uF 0.1uF 10% 10% 10% 50V 50V 50V 7-685-646-79 SCREW +BVTP 3X8 TYPE2 N-S C165 C166 C167 C168 C169 1-115-339-11 1-115-339-11 1-115-339-11 1-115-339-11 1-115-339-11 CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP 0.1uF 0.1uF 0.1uF 0.1uF 0.1uF 10% 10% 10% 10% 10% 50V 50V 50V 50V 50V C170 C171 C172 C181 C182 1-115-339-11 1-115-339-11 1-115-339-11 1-163-021-11 1-163-021-11 CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP 0.1uF 0.1uF 0.1uF 0.01uF 0.01uF 10% 10% 10% 10% 10% 50V 50V 50V 50V 50V C190 C191 C192 C300 C301 1-164-505-11 1-126-193-21 1-216-295-00 1-115-819-11 1-126-153-11 CERAMIC CHIP 2.2uF ELECT 1uF CONDUCTOR, CHIP ELECT 2200uF ELECT 22uF 20% 16V 50V 20% 20% 35V 6.3V C302 C303 C304 C306 C307 1-162-970-11 1-136-157-00 1-136-157-00 1-162-970-11 1-162-910-11 CERAMIC CHIP FILM FILM CERAMIC CHIP CERAMIC CHIP 0.01uF 0.022uF 0.022uF 0.01uF 5PF 10% 5% 5% 10% 0.25PF 25V 50V 50V 25V 50V C308 C309 C310 C311 C312 1-162-964-11 1-164-156-11 1-162-970-11 1-162-970-11 1-124-584-00 CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP ELECT 0.001uF 0.1uF 0.01uF 0.01uF 100uF 10% 10% 10% 20% 50V 25V 25V 25V 10V C313 C316 C317 C318 C319 1-136-165-00 1-163-021-11 1-126-948-11 1-104-665-11 1-107-826-11 FILM CERAMIC CHIP ELECT ELECT CERAMIC CHIP 0.1uF 0.01uF 100uF 100uF 0.1uF 5% 10% 20% 20% 10% 50V 50V 35V 10V 16V C320 C323 C324 C325 C326 1-124-584-00 1-162-970-11 1-162-970-11 1-124-584-00 1-124-589-11 ELECT CERAMIC CHIP CERAMIC CHIP ELECT ELECT 100uF 0.01uF 0.01uF 100uF 47uF 20% 10% 10% 20% 20% 10V 25V 25V 10V 16V C327 C328 C329 C330 C331 1-162-970-11 1-107-826-11 1-126-176-11 1-162-970-11 1-107-826-11 CERAMIC CHIP CERAMIC CHIP ELECT CERAMIC CHIP CERAMIC CHIP 0.01uF 0.1uF 220uF 0.01uF 0.1uF 10% 10% 20% 10% 10% 25V 16V 10V 25V 16V < CAPACITOR/CHIP CONDUCTOR > C101 C102 C103 C104 C105 1-127-573-11 1-127-573-11 1-127-573-11 1-127-573-11 1-127-573-11 CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP 1uF 1uF 1uF 1uF 1uF 10% 10% 10% 10% 10% 16V 16V 16V 16V 16V C106 C111 C112 C113 C114 1-127-573-11 1-163-021-11 1-163-021-11 1-163-021-11 1-163-021-11 CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP 1uF 0.01uF 0.01uF 0.01uF 0.01uF 10% 10% 10% 10% 10% 16V 50V 50V 50V 50V C115 C116 C121 C122 C123 1-163-021-11 1-163-021-11 1-115-339-11 1-115-339-11 1-115-339-11 CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP 0.01uF 0.01uF 0.1uF 0.1uF 0.1uF 10% 10% 10% 10% 10% 50V 50V 50V 50V 50V C124 C125 C126 C131 C132 1-115-339-11 1-115-339-11 1-115-339-11 1-115-339-11 1-115-339-11 CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP 0.1uF 0.1uF 0.1uF 0.1uF 0.1uF 10% 10% 10% 10% 10% 50V 50V 50V 50V 50V C133 C134 C135 C136 C141 1-115-339-11 1-115-339-11 1-115-339-11 1-115-339-11 1-163-021-11 CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP 0.1uF 0.1uF 0.1uF 0.1uF 0.01uF 10% 10% 10% 10% 10% 50V 50V 50V 50V 50V C142 C143 C144 C145 C146 1-163-021-11 1-163-021-11 1-163-021-11 1-163-021-11 1-163-021-11 CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP 0.01uF 0.01uF 0.01uF 0.01uF 0.01uF 10% 10% 10% 10% 10% 50V 50V 50V 50V 50V C147 C148 C149 C150 C151 1-163-021-11 1-163-021-11 1-163-021-11 1-163-021-11 1-163-021-11 CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP 0.01uF 0.01uF 0.01uF 0.01uF 0.01uF 10% 10% 10% 10% 10% 50V 50V 50V 50V 50V C152 C161 1-163-021-11 CERAMIC CHIP 1-115-339-11 CERAMIC CHIP 0.01uF 0.1uF 10% 10% 50V 50V 120 Ref. No. The components identified by mark 0 or dotted line with mark 0 are critical for safety. Replace only with part number specified. HCD-C770/C990 AMP Ref. No. Part No. Description C332 C333 C334 C336 C337 1-136-165-00 1-136-157-00 1-136-157-00 1-124-584-00 1-107-826-11 FILM FILM FILM ELECT CERAMIC CHIP 0.1uF 0.022uF 0.022uF 100uF 0.1uF 5% 5% 5% 20% 10% 50V 50V 50V 10V 16V Remark C341 C342 C343 C344 C345 1-163-021-11 1-126-948-11 1-107-826-11 1-162-970-11 1-104-665-11 CERAMIC CHIP ELECT CERAMIC CHIP CERAMIC CHIP ELECT 0.01uF 100uF 0.1uF 0.01uF 100uF 10% 20% 10% 10% 20% 50V 35V 16V 25V 10V C348 C349 C350 C351 C352 1-162-970-11 1-162-970-11 1-124-584-00 1-107-826-11 1-162-970-11 CERAMIC CHIP CERAMIC CHIP ELECT CERAMIC CHIP CERAMIC CHIP 0.01uF 0.01uF 100uF 0.1uF 0.01uF 10% 10% 20% 10% 10% 25V 25V 10V 16V 25V C353 C354 C355 C356 C358 1-136-165-00 1-136-157-00 1-107-826-11 1-136-157-00 1-162-970-11 FILM FILM CERAMIC CHIP FILM CERAMIC CHIP 0.1uF 0.022uF 0.1uF 0.022uF 0.01uF 5% 5% 10% 5% 10% 50V 50V 16V 50V 25V C359 C362 C363 C364 C365 1-162-970-11 1-104-665-11 1-163-021-11 1-126-948-11 1-107-826-11 CERAMIC CHIP ELECT CERAMIC CHIP ELECT CERAMIC CHIP 0.01uF 100uF 0.01uF 100uF 0.1uF 10% 20% 10% 20% 10% 25V 10V 50V 35V 16V C368 C372 C373 C374 C375 1-107-826-11 1-107-826-11 1-162-970-11 1-136-165-00 1-136-157-00 CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP FILM FILM 0.1uF 0.1uF 0.01uF 0.1uF 0.022uF 10% 10% 10% 5% 5% 16V 16V 25V 50V 50V C376 C378 C381 C382 C383 1-136-157-00 1-107-826-11 1-104-665-11 1-163-021-11 1-126-948-11 FILM CERAMIC CHIP ELECT CERAMIC CHIP ELECT 0.022uF 0.1uF 100uF 0.01uF 100uF 5% 10% 20% 10% 20% 50V 16V 10V 50V 35V C384 C387 C388 C389 C390 1-107-826-11 1-162-970-11 1-162-970-11 1-124-584-00 1-162-970-11 CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP ELECT CERAMIC CHIP 0.1uF 0.01uF 0.01uF 100uF 0.01uF 10% 10% 10% 20% 10% 16V 25V 25V 10V 25V C391 C392 C393 C394 C395 1-162-970-11 1-124-584-00 1-162-970-11 1-107-826-11 1-136-165-00 CERAMIC CHIP ELECT CERAMIC CHIP CERAMIC CHIP FILM 0.01uF 100uF 0.01uF 0.1uF 0.1uF 10% 20% 10% 10% 5% 25V 10V 25V 16V 50V C396 C397 C399 C400 C401 1-136-157-00 1-136-157-00 1-107-826-11 1-107-826-11 1-104-665-11 FILM FILM CERAMIC CHIP CERAMIC CHIP ELECT 0.022uF 0.022uF 0.1uF 0.1uF 100uF 5% 5% 10% 10% 20% 50V 50V 16V 16V 10V C402 C403 C404 C405 C406 1-163-021-11 1-126-948-11 1-107-826-11 1-104-665-11 1-107-826-11 CERAMIC CHIP ELECT CERAMIC CHIP ELECT CERAMIC CHIP 0.01uF 100uF 0.1uF 100uF 0.1uF 10% 20% 10% 20% 10% 50V 35V 16V 10V 16V C407 C408 C409 1-104-665-11 ELECT 1-107-826-11 CERAMIC CHIP 1-162-970-11 CERAMIC CHIP 100uF 0.1uF 0.01uF 20% 10% 10% 10V 16V 25V Ref. No. Part No. Description Remark C410 C411 1-107-826-11 CERAMIC CHIP 1-136-165-00 FILM 0.1uF 0.1uF 10% 5% 16V 50V C412 C413 C414 C415 C416 1-136-157-00 1-136-157-00 1-107-826-11 1-162-970-11 1-162-970-11 FILM FILM CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP 0.022uF 0.022uF 0.1uF 0.01uF 0.01uF 5% 5% 10% 10% 10% 50V 50V 16V 25V 25V C417 C418 C419 C420 C421 1-104-665-11 1-107-826-11 1-163-021-11 1-126-948-11 1-107-826-11 ELECT CERAMIC CHIP CERAMIC CHIP ELECT CERAMIC CHIP 100uF 0.1uF 0.01uF 100uF 0.1uF 20% 10% 10% 20% 10% 10V 16V 50V 35V 16V C422 C423 C424 C425 C426 1-104-665-11 1-104-665-11 1-107-826-11 1-104-665-11 1-107-826-11 ELECT ELECT CERAMIC CHIP ELECT CERAMIC CHIP 100uF 100uF 0.1uF 100uF 0.1uF 20% 20% 10% 20% 10% 10V 10V 16V 10V 16V C427 C432 C451 C452 C453 1-104-665-11 1-162-915-11 1-131-704-11 1-131-704-11 1-131-704-11 ELECT CERAMIC CHIP FILM FILM FILM 100uF 10PF 1uF 1uF 1uF 20% 0.5PF 5% 5% 5% 10V 50V 50V 50V 50V C454 C455 C456 C457 C458 1-131-704-11 1-131-704-11 1-131-704-11 1-131-704-11 1-131-704-11 FILM FILM FILM FILM FILM 1uF 1uF 1uF 1uF 1uF 5% 5% 5% 5% 5% 50V 50V 50V 50V 50V C459 C460 C461 C462 C471 1-131-704-11 1-131-704-11 1-131-704-11 1-131-704-11 1-162-928-11 FILM FILM FILM FILM CERAMIC CHIP 1uF 1uF 1uF 1uF 120PF 5% 5% 5% 5% 5% 50V 50V 50V 50V 50V C472 C473 C474 C481 C482 1-162-927-11 1-162-927-11 1-126-935-11 1-162-928-11 1-162-927-11 CERAMIC CHIP CERAMIC CHIP ELECT CERAMIC CHIP CERAMIC CHIP 100PF 100PF 470uF 120PF 100PF 5% 5% 20% 5% 5% 50V 50V 16V 50V 50V C483 C484 C490 C491 C493 1-162-927-11 1-126-935-11 1-126-933-11 1-164-156-11 1-126-947-11 CERAMIC CHIP ELECT ELECT CERAMIC CHIP ELECT 100PF 470uF 100uF 0.1uF 47uF 5% 20% 20% 50V 16V 16V 25V 35V 20% < CONNECTOR > CN300 CN301 * CN302 CN305 * CN309 1-565-731-11 1-779-280-11 1-564-704-11 1-779-285-11 1-506-987-11 PLUG, CONNECTOR (2.5mm) 5P CONNECTOR, FFC (LIF (NON-ZIF)) 12P PIN, CONNECTOR (SMALL TYPE) 2P CONNECTOR, FFC/FPC (ZIF) 17P PIN, CONNECTOR (PC BOARD) 5P < DIODE > D101 D102 D103 D104 D105 8-719-404-50 8-719-404-50 8-719-404-50 8-719-404-50 8-719-404-50 DIODE DIODE DIODE DIODE DIODE MA111-TX MA111-TX MA111-TX MA111-TX MA111-TX D106 D180 8-719-404-50 DIODE MA111-TX 8-719-975-41 DIODE RB411D-T146 121 HCD-C770/C990 AMP Ref. No. Part No. Description D181 D190 D191 8-719-404-50 DIODE MA111-TX 8-719-975-41 DIODE RB411D-T146 8-719-975-41 DIODE RB411D-T146 D192 D311 D312 D313 D314 8-719-083-63 6-500-131-01 6-500-131-01 6-500-131-01 6-500-131-01 DIODE DIODE DIODE DIODE DIODE UDZSTE-1713B LI116 LI116 LI116 LI116 D315 D316 D321 D322 D323 6-500-131-01 6-500-131-01 6-500-131-01 6-500-131-01 6-500-131-01 DIODE DIODE DIODE DIODE DIODE LI116 LI116 LI116 LI116 LI116 D324 D325 D326 D331 D332 6-500-131-01 6-500-131-01 6-500-131-01 6-500-260-01 6-500-260-01 DIODE DIODE DIODE DIODE DIODE LI116 LI116 LI116 P6SMB39AT3 P6SMB39AT3 D333 D334 D335 D336 D341 6-500-260-01 6-500-260-01 6-500-260-01 6-500-260-01 6-500-260-01 DIODE DIODE DIODE DIODE DIODE P6SMB39AT3 P6SMB39AT3 P6SMB39AT3 P6SMB39AT3 P6SMB39AT3 D342 D343 D344 D345 D346 6-500-260-01 6-500-260-01 6-500-260-01 6-500-260-01 6-500-260-01 DIODE DIODE DIODE DIODE DIODE P6SMB39AT3 P6SMB39AT3 P6SMB39AT3 P6SMB39AT3 P6SMB39AT3 D351 D352 D353 D354 D355 6-500-248-01 6-500-248-01 6-500-248-01 6-500-248-01 6-500-248-01 DIODE DIODE DIODE DIODE DIODE SFPL-62V SFPL-62V SFPL-62V SFPL-62V SFPL-62V D356 D361 D362 D363 D364 6-500-248-01 6-500-248-01 6-500-248-01 6-500-248-01 6-500-248-01 DIODE DIODE DIODE DIODE DIODE SFPL-62V SFPL-62V SFPL-62V SFPL-62V SFPL-62V D365 D366 6-500-248-01 DIODE SFPL-62V 6-500-248-01 DIODE SFPL-62V < FERRITE BEAD > FB300 FB301 FB303 FB304 FB307 1-469-760-21 1-469-760-21 1-400-160-51 1-469-760-21 1-469-760-21 FERRITE BEAD FERRITE BEAD FERRITE BEAD FERRITE BEAD FERRITE BEAD FB308 FB309 FB312 FB313 FB314 1-469-760-21 1-400-160-51 1-400-160-51 1-400-160-51 1-469-760-21 FERRITE BEAD FERRITE BEAD FERRITE BEAD FERRITE BEAD FERRITE BEAD FB315 FB318 FB320 1-469-760-21 FERRITE BEAD 1-400-160-51 FERRITE BEAD 1-400-160-51 FERRITE BEAD 122 Remark Ref. No. Part No. Description Remark < IC > IC300 IC301 IC302 IC303 IC304 6-701-189-01 6-701-845-01 8-759-533-85 8-759-460-72 6-701-845-01 IC IC IC IC IC MC74VHC1GU04DFT1 CXD9702L BA05FP-E2 BA033FP-E2 CXD9702L IC305 IC306 IC307 IC308 IC309 6-700-279-01 6-701-845-01 6-701-845-01 6-700-279-01 6-701-845-01 IC IC IC IC IC CXD9634Q CXD9702L CXD9702L CXD9634Q CXD9702L IC310 IC311 IC401 6-700-279-01 IC CXD9634Q 6-701-845-01 IC CXD9702L 8-759-385-17 IC NJM4580E (TE2) < TERMINAL BOARD > J401 1-694-919-11 TERMINAL BOARD (SPEAKER FRONT L/R, CENTER, WOOFER, REAR L/R) < COIL/SHORT > L300 L302 L401 L402 L403 1-216-295-11 1-412-939-11 1-456-035-11 1-456-035-11 1-456-035-11 SHORT CHIP INDUCTOR INDUCTOR INDUCTOR INDUCTOR L404 L405 L406 1-456-035-11 INDUCTOR 1-456-035-11 INDUCTOR 1-456-035-11 INDUCTOR 0 1uH 10uH 10uH 10uH 10uH 10uH 10uH < TRANSISTOR > Q101 Q102 Q103 Q104 Q105 8-729-920-75 8-729-920-75 8-729-920-75 8-729-920-75 8-729-920-75 TRANSISTOR TRANSISTOR TRANSISTOR TRANSISTOR TRANSISTOR 2SC2412K-T-146-QR 2SC2412K-T-146-QR 2SC2412K-T-146-QR 2SC2412K-T-146-QR 2SC2412K-T-146-QR Q106 Q107 Q108 Q109 Q110 8-729-920-75 8-729-920-75 8-729-920-75 8-729-920-75 8-729-920-75 TRANSISTOR TRANSISTOR TRANSISTOR TRANSISTOR TRANSISTOR 2SC2412K-T-146-QR 2SC2412K-T-146-QR 2SC2412K-T-146-QR 2SC2412K-T-146-QR 2SC2412K-T-146-QR Q111 Q112 Q113 Q114 Q190 8-729-920-75 8-729-920-75 8-729-901-00 8-729-027-23 8-729-801-84 TRANSISTOR TRANSISTOR TRANSISTOR TRANSISTOR TRANSISTOR 2SC2412K-T-146-QR 2SC2412K-T-146-QR DTC124EK-T146 DTA114EKA-T146 2SB1013-4 Q191 Q192 8-729-901-00 TRANSISTOR 8-729-901-00 TRANSISTOR DTC124EKA-T146 DTC124EKA-T146 < RESISTOR > R101 R102 R103 R104 R105 1-216-845-11 1-216-845-11 1-216-845-11 1-216-845-11 1-216-845-11 METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP 100K 100K 100K 100K 100K 5% 5% 5% 5% 5% 1/10W 1/10W 1/10W 1/10W 1/10W R106 R107 R108 1-216-845-11 METAL CHIP 1-216-845-11 METAL CHIP 1-216-845-11 METAL CHIP 100K 100K 100K 5% 5% 5% 1/10W 1/10W 1/10W HCD-C770/C990 AMP Ref. No. Part No. Description Remark R109 R110 1-216-845-11 METAL CHIP 1-216-845-11 METAL CHIP 100K 100K 5% 5% 1/10W 1/10W R111 R112 R113 R190 R191 1-216-845-11 1-216-845-11 1-216-845-11 1-216-845-11 1-216-077-00 METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP 100K 100K 100K 100K 15K 5% 5% 5% 5% 5% 1/10W 1/10W 1/10W 1/10W 1/10W R300 R301 R302 R304 R305 1-216-833-11 1-216-821-11 1-216-857-11 1-216-809-11 1-216-809-11 METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP 10K 1K 1M 100 100 5% 5% 5% 5% 5% 1/10W 1/10W 1/10W 1/10W 1/10W R307 R308 R309 R310 R311 1-216-809-11 1-216-821-11 1-216-821-11 1-216-821-11 1-216-821-11 METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP 100 1K 1K 1K 1K 5% 5% 5% 5% 5% 1/10W 1/10W 1/10W 1/10W 1/10W R312 R313 R315 R316 R317 1-216-821-11 1-216-821-11 1-216-809-11 1-216-809-11 1-216-809-11 METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP 1K 1K 100 100 100 5% 5% 5% 5% 5% 1/10W 1/10W 1/10W 1/10W 1/10W R318 R319 R320 R321 R322 1-216-809-11 1-216-809-11 1-216-809-11 1-216-809-11 1-216-805-11 METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP 100 100 100 100 47 5% 5% 5% 5% 5% 1/10W 1/10W 1/10W 1/10W 1/10W R325 R330 R333 R334 R335 1-216-801-11 1-216-809-11 1-216-809-11 1-216-817-11 1-216-809-11 METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP 22 100 100 470 100 5% 5% 5% 5% 5% R336 R337 R338 R339 R340 1-216-817-11 1-216-821-11 1-216-864-11 1-216-809-11 1-216-809-11 METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP 470 1K 0 100 100 R341 R342 R343 R344 R346 1-216-809-11 1-216-809-11 1-216-809-11 1-216-809-11 1-216-864-11 METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP R347 R348 R349 R350 R370 1-216-864-11 1-216-809-11 1-216-809-11 1-216-809-11 1-216-819-11 R395 R396 R397 R398 R399 R470 R471 R472 R473 R474 Ref. No. AUDIO Part No. Description R475 R480 R481 R482 R483 1-218-725-11 1-216-837-11 1-216-837-11 1-216-837-11 1-216-837-11 RES-CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP 24K 22K 22K 22K 22K 5% 5% 5% 5% 5% Remark 1/10W 1/10W 1/10W 1/10W 1/10W R484 R485 R490 R491 1-216-839-11 1-218-725-11 1-216-833-11 1-216-833-11 METAL CHIP RES-CHIP METAL CHIP METAL CHIP 33K 24K 10K 10K 5% 5% 5% 5% 1/10W 1/10W 1/10W 1/10W < VIBRATOR > X300 1-795-286-21 VIBRATOR, CRYSTAL (44.152MHz) ************************************************************** A-4730-641-A AUDIO BOARD, COMPLETE (AEP) A-4728-875-A AUDIO BOARD, COMPLETE (EXCEPT AEP) ********************** < CAPACITOR > C201 1-162-959-11 CERAMIC CHIP 330PF 5% C203 1-164-156-11 CERAMIC CHIP 0.1uF C204 1-164-739-11 CERAMIC CHIP 560PF 5% C205 1-162-970-11 CERAMIC CHIP 0.01uF 10% C206 1-164-380-11 CERAMIC CHIP 51PF 5% 1/10W 1/10W 1/10W 1/10W 1/10W C207 1-126-963-11 ELECT 4.7uF 20% C208 1-162-924-11 CERAMIC CHIP 56PF 5% C209 1-126-947-11 ELECT 47uF 20% 5% 5% 5% 5% 5% 1/10W 1/10W 1/10W 1/10W 1/10W C210 C211 1-126-965-11 ELECT 1-126-965-11 ELECT 22uF 22uF 20% 20% 5% 5% 5% 5% 5% 1/10W 1/10W 1/10W 1/10W 1/10W 1-162-970-11 1-162-970-11 1-115-156-11 1-115-156-11 1-126-965-11 CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP ELECT 0.01uF 0.01uF 1uF 1uF 22uF 10% 10% 100 100 100 100 0 C213 C214 C215 C216 C220 0 100 100 100 680 5% 5% 5% 5% 5% 1/10W 1/10W 1/10W 1/10W 1/10W 1-126-965-11 1-126-965-11 1-164-156-11 1-126-965-11 1-164-156-11 ELECT ELECT CERAMIC CHIP ELECT CERAMIC CHIP 22uF 22uF 0.1uF 22uF 0.1uF 20% 20% METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP C221 C222 C223 C224 C225 1-216-031-00 1-216-031-00 1-216-031-00 1-216-841-11 1-216-829-11 METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP 180 180 180 47K 4.7K 5% 5% 5% 5% 5% 1/10W 1/10W 1/10W 1/10W 1/10W C226 C227 C228 C230 C232 1-164-156-11 1-126-965-11 1-164-156-11 1-126-964-11 1-126-964-11 CERAMIC CHIP ELECT CERAMIC CHIP ELECT ELECT 0.1uF 22uF 0.1uF 10uF 10uF 1-216-837-11 1-216-837-11 1-216-837-11 1-216-837-11 1-216-839-11 METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP 22K 22K 22K 22K 33K 5% 5% 5% 5% 5% 1/10W 1/10W 1/10W 1/10W 1/10W C233 C234 C235 C236 C237 1-162-964-11 1-162-964-11 1-126-153-11 1-162-960-11 1-126-153-11 CERAMIC CHIP CERAMIC CHIP ELECT CERAMIC CHIP ELECT C238 C239 C240 1-162-960-11 CERAMIC CHIP 1-126-965-11 ELECT 1-162-960-11 CERAMIC CHIP 20% 20% 50V (AEP) 25V (AEP) 50V (AEP) 25V (AEP) 50V (AEP) 50V (AEP) 50V (AEP) 16V (AEP) 35V 35V 25V 25V 10V 10V 35V 35V 35V 25V 35V 25V 20% 20% 25V 35V 25V 50V 50V 0.001uF 0.001uF 22uF 220PF 22uF 10% 10% 20% 10% 20% 50V 50V 6.3V 50V 6.3V 220PF 22uF 220PF 10% 20% 10% 50V 35V 50V 20% 123 HCD-C770/C990 AUDIO Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark C241 C242 1-126-965-11 ELECT 1-162-960-11 CERAMIC CHIP 22uF 220PF 20% 10% 35V 50V R209 R210 1-216-813-11 METAL CHIP 1-216-813-11 METAL CHIP 220 220 5% 5% 1/10W 1/10W C243 C245 C608 C609 1-126-157-11 1-126-964-11 1-162-969-11 1-162-969-11 10uF 10uF 0.0068uF 0.0068uF 20% 20% 10% 10% 16V 50V 25V 25V R211 R212 R213 R214 R215 1-216-813-11 1-216-813-11 1-216-841-11 1-218-867-11 1-218-867-11 METAL CHIP METAL CHIP METAL CHIP RES-CHIP RES-CHIP 220 220 47K 6.8K 6.8K 5% 5% 5% 5% 5% 1/10W 1/10W 1/10W 1/10W 1/10W R216 R217 R218 R219 R220 1-216-829-11 1-216-839-11 1-216-833-11 1-216-809-11 1-216-845-11 METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP 4.7K 33K 10K 100 100K 5% 5% 5% 5% 5% 1/10W 1/10W 1/10W 1/10W 1/10W R221 R222 R223 R224 R225 1-216-845-11 1-216-839-11 1-216-833-11 1-216-809-11 1-216-839-11 METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP 100K 33K 10K 100 33K 5% 5% 5% 5% 5% 1/10W 1/10W 1/10W 1/10W 1/10W R226 R227 R228 R229 R230 1-216-839-11 1-216-821-11 1-216-821-11 1-216-845-11 1-216-845-11 METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP 33K 1K 1K 100K 100K 5% 5% 5% 5% 5% 1/10W 1/10W 1/10W 1/10W 1/10W R231 R232 R233 R235 R236 1-218-285-11 1-218-867-11 1-216-833-11 1-216-841-11 1-216-833-11 RES-CHIP RES-CHIP METAL CHIP METAL CHIP METAL CHIP 75 6.8K 10K 47K 10K 5% 5% 5% 5% 5% 1/10W 1/10W 1/10W 1/10W 1/10W R237 R238 R239 R241 R242 1-218-867-11 1-216-833-11 1-216-821-11 1-216-841-11 1-216-833-11 RES-CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP 6.8K 10K 1K 47K 10K 5% 5% 5% 5% 5% 1/10W 1/10W 1/10W 1/10W 1/10W R243 R244 R245 R246 R247 1-218-867-11 1-216-833-11 1-216-821-11 1-216-841-11 1-216-833-11 RES-CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP 6.8K 10K 1K 47K 10K 5% 5% 5% 5% 5% 1/10W 1/10W 1/10W 1/10W 1/10W R249 R250 R251 R252 R253 1-218-867-11 1-216-833-11 1-218-285-11 1-216-833-11 1-216-841-11 RES-CHIP METAL CHIP RES-CHIP METAL CHIP METAL CHIP 6.8K 10K 75 10K 47K 5% 5% 5% 5% 5% 1/10W 1/10W 1/10W 1/10W 1/10W R254 R290 R291 R292 R293 1-218-285-11 1-216-853-11 1-216-853-11 1-216-821-11 1-216-821-11 RES-CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP 75 470K 470K 1K 1K 5% 5% 5% 5% 5% 1/10W 1/10W 1/10W 1/10W 1/10W R294 R295 1-216-815-11 METAL CHIP 1-216-815-11 METAL CHIP 330 330 5% 5% 1/10W 1/10W ELECT ELECT CERAMIC CHIP CERAMIC CHIP < CONNECTOR > CN201 CN202 CN204 CN205 CN208 1-784-733-11 1-779-566-21 1-568-940-11 1-506-481-11 1-779-548-21 CONNECTOR, FFC 11P CONNECTOR, FFC (LIF (NON-ZIF)) 29P PIN, CONNECTOR 2P PIN, CONNECTOR 2P CONNECTOR, FFC (LIF (NON-ZIF)) 11P < DIODE > D201 D202 D203 8-719-056-78 DIODE UDZ-TE-17-4.3B (AEP) 8-719-404-50 DIODE MA111-TX 8-719-404-50 DIODE MA111-TX < IC > IC201 IC202 8-759-557-36 IC BU1924F-E2 (AEP) 8-759-385-76 IC MC14052 BDR2 < JACK > J205 J206 1-816-602-11 PIN JACK 6P (VIDEO 2/COMPONENT VIDEO OUT) 1-816-602-21 PIN JACK 6P (VIDEO 1) < COIL > L205 L206 1-469-525-11 INDUCTOR 1-469-525-11 INDUCTOR 10uH (AEP) 10uH < TRANSISTOR > Q201 Q205 Q206 Q207 Q208 8-729-120-28 8-729-901-00 8-729-901-00 8-729-920-31 8-729-920-31 TRANSISTOR TRANSISTOR TRANSISTOR TRANSISTOR TRANSISTOR 2SC2412K-T-146-QR (AEP) DTC124EKA-T146 DTC124EKA-T146 DTC343TK-T-146 DTC343TK-T-146 Q220 Q221 Q222 Q223 8-729-901-81 8-729-901-81 8-729-026-50 8-729-901-00 TRANSISTOR TRANSISTOR TRANSISTOR TRANSISTOR 2SC2412K-T-146-R 2SC2412K-T-146-R 2SA1037AK-T146-QR DTC124EKA-T146 < RESISTOR > R201 1-216-829-11 METAL CHIP 4.7K 5% R202 1-216-821-11 METAL CHIP 1K 5% R203 1-216-843-11 METAL CHIP 68K 5% R204 1-216-841-11 METAL CHIP 47K 5% R205 1-216-845-11 METAL CHIP 100K 5% R206 1-216-853-11 METAL CHIP 470K 5% R207 1-216-814-11 METAL CHIP 270 5% R208 1-216-813-11 METAL CHIP 220 5% 124 1/10W (AEP) 1/10W (AEP) 1/10W (AEP) 1/10W (AEP) 1/10W (AEP) 1/10W (AEP) 1/10W (AEP) 1/10W < VIBRATOR > X201 1-579-900-21 VIBRATOR, CRYSTAL (4.332MHz) (AEP) ************************************************************** HCD-C770/C990 CONTROL Ref. No. Part No. Description Remark Ref. No. Part No. 1-685-068-11 CONTROL BOARD *************** DDCON Description DVD Remark < IC > R800 R801 R802 R803 R809 1-216-815-11 1-216-817-11 1-216-819-11 1-216-821-11 1-216-813-11 METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP 330 470 680 1K 220 5% 5% 5% 5% 5% 1/10W 1/10W 1/10W 1/10W 1/10W R837 R844 R849 R860 R873 1-216-815-11 1-216-817-11 1-216-819-11 1-216-821-11 1-216-813-11 METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP 330 470 680 1K 220 5% 5% 5% 5% 5% 1/10W 1/10W 1/10W 1/10W 1/10W IC801 8-759-366-45 IC NJU3713G (TE2) < COIL > L801 1-412-959-11 INDUCTOR 47uH < TRANSISTOR > Q803 Q804 8-729-808-42 TRANSISTOR 8-729-808-42 TRANSISTOR 2SD1624-T-TD 2SD1624-T-TD < RESISTOR > < SWITCH > S801 S802 S803 S804 S805 1-762-875-21 1-762-875-21 1-762-875-21 1-762-875-21 1-762-875-21 SWITCH, KEYBOARD (H) SWITCH, KEYBOARD (X) SWITCH, KEYBOARD (PRESET–, . PREV) SWITCH, KEYBOARD (x) SWITCH, KEYBOARD (PRESET+, > NEXT) S821 1-762-875-21 SWITCH, KEYBOARD (FIELD, +) S822 1-762-875-21 SWITCH, KEYBOARD (SOUND, –) S823 1-762-875-21 SWITCH, KEYBOARD (DISPLAY) S824 1-762-875-21 SWITCH, KEYBOARD (BAND) S825 1-762-875-21 SWITCH, KEYBOARD (FUNCTION) ************************************************************** R810 R811 R812 R813 R814 1-216-809-11 1-216-809-11 1-216-809-11 1-216-809-11 1-216-841-11 METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP 100 100 100 100 47K 5% 5% 5% 5% 5% 1/10W 1/10W 1/10W 1/10W 1/10W R838 R841 R842 R843 R850 1-216-805-11 1-216-809-11 1-216-809-11 1-216-809-11 1-216-828-11 METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP 47 100 100 100 3.9K 5% 5% 5% 5% 5% 1/10W 1/10W 1/10W 1/10W 1/10W R855 R874 1-216-809-11 METAL CHIP 1-216-839-11 METAL CHIP 100 33K 5% 5% 1/10W 1/10W A-4676-963-A DDCON BOARD, COMPLETE ********************** < TRANSFORMER > < CAPACITOR > T801 1-437-416-11 TRANSFORMER, DC-DC CONVERTER ************************************************************** C802 C803 C804 C805 C806 1-162-964-11 1-162-964-11 1-162-970-11 1-162-970-11 1-126-153-11 CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP ELECT 0.001uF 0.001uF 0.01uF 0.01uF 22uF 10% 10% 10% 10% 20% 50V 50V 25V 25V 6.3V C820 C821 C822 C823 1-162-970-11 1-124-261-00 1-164-360-11 1-124-261-00 CERAMIC CHIP ELECT CERAMIC CHIP ELECT 0.01uF 10uF 0.1uF 220uF 10% 20% 25V 50V 16V 16V 20% < CONNECTOR > CN802 CN803 * CN804 CN807 CN812 CN814 1-506-481-11 1-779-547-21 1-568-943-11 1-568-940-21 1-779-549-21 PIN, CONNECTOR 2P CONNECTOR, FFC (LIF (NON-ZIF) 10P PIN, CONNECTOR 5P PIN, CONNECTOR 2P CONNECTOR, FFC (LIF (NON-ZIF)) 12P 1-779-556-21 CONNECTOR, FFC (LIF (NON-ZIF)) 19P < DIODE > D806 D807 D808 D809 D810 8-719-404-50 8-719-404-50 8-719-404-50 8-719-404-50 8-719-069-56 DIODE DIODE DIODE DIODE DIODE MA111-TX MA111-TX MA111-TX MA111-TX UDZSTE-176.2B < FERRITE BEAD > FB800 FB801 FB802 1-414-813-11 FERRITE 1-414-813-11 FERRITE 1-414-813-11 FERRITE 0uH 0uH 0uH A-4676-951-A A-4729-049-A A-4730-636-A A-4730-646-A DVD BOARD, COMPLETE (C770: US, CND) DVD BOARD, COMPLETE (C990) DVD BOARD, COMPLETE (AEP) DVD BOARD, COMPLETE (AUS) ********************* < CAPACITOR > C001 C003 C004 C005 C006 1-126-206-11 1-126-206-11 1-126-204-11 1-126-246-11 1-126-204-11 ELECT CHIP ELECT CHIP ELECT CHIP ELECT CHIP ELECT CHIP 100uF 100uF 47uF 220uF 47uF 20% 20% 20% 20% 20% 6.3V 6.3V 16V 4V 16V C007 C008 C010 C011 C012 1-164-850-11 1-107-820-11 1-107-820-11 1-107-820-11 1-107-820-11 CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP 10PF 0.1uF 0.1uF 0.1uF 0.1uF 0.5PF 50V 16V 16V 16V 16V C013 C014 C015 C016 C017 1-107-820-11 1-107-820-11 1-107-820-11 1-107-820-11 1-107-820-11 CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP 0.1uF 0.1uF 0.1uF 0.1uF 0.1uF 16V 16V 16V 16V 16V C018 C019 C020 C201 C203 1-107-820-11 1-107-820-11 1-126-246-11 1-126-246-11 1-164-947-11 CERAMIC CHIP CERAMIC CHIP ELECT CHIP ELECT CHIP CERAMIC CHIP 0.1uF 0.1uF 220uF 220uF 0.01uF 16V 16V 4V 4V 50V C204 1-164-943-11 CERAMIC CHIP 0.01uF 20% 20% 10% 16V 125 HCD-C770/C990 DVD Ref. No. Part No. Description C217 C219 C225 C226 1-164-947-11 1-164-947-11 1-107-820-11 1-164-947-11 CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP 0.01uF 0.01uF 0.1uF 0.01uF 50V 50V 16V 50V C228 C229 C230 C231 C232 1-164-947-11 1-164-947-11 1-164-947-11 1-164-947-11 1-164-947-11 CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP 0.01uF 0.01uF 0.01uF 0.01uF 0.01uF 50V 50V 50V 50V 50V C233 C234 C235 C236 C237 1-164-947-11 1-164-947-11 1-164-947-11 1-164-947-11 1-164-947-11 CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP 0.01uF 0.01uF 0.01uF 0.01uF 0.01uF 50V 50V 50V 50V 50V C238 C239 C240 C241 C242 1-164-947-11 1-164-947-11 1-164-947-11 1-164-947-11 1-164-947-11 CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP 0.01uF 0.01uF 0.01uF 0.01uF 0.01uF 50V 50V 50V 50V 50V C243 C244 C245 C246 C247 1-164-947-11 1-164-947-11 1-164-947-11 1-164-947-11 1-164-947-11 CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP 0.01uF 0.01uF 0.01uF 0.01uF 0.01uF 50V 50V 50V 50V 50V C248 C249 C250 C251 C252 1-164-947-11 1-164-947-11 1-164-947-11 1-164-947-11 1-164-947-11 CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP 0.01uF 0.01uF 0.01uF 0.01uF 0.01uF 50V 50V 50V 50V 50V C253 C254 C255 C257 C258 1-164-947-11 1-117-370-11 1-164-947-11 1-117-370-11 1-164-947-11 CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP 0.01uF 10uF 0.01uF 10uF 0.01uF 50V 10V 50V 10V 50V C259 C260 C261 C262 C263 1-164-947-11 1-164-947-11 1-164-947-11 1-164-947-11 1-164-947-11 CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP 0.01uF 0.01uF 0.01uF 0.01uF 0.01uF 50V 50V 50V 50V 50V C264 C265 C266 C267 C268 1-117-370-11 1-164-947-11 1-164-947-11 1-164-947-11 1-164-947-11 CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP 10uF 0.01uF 0.01uF 0.01uF 0.01uF 10V 50V 50V 50V 50V C269 C270 C271 C274 C301 1-164-947-11 1-164-947-11 1-164-947-11 1-164-947-11 1-117-370-11 CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP 0.01uF 0.01uF 0.01uF 0.01uF 10uF 50V 50V 50V 50V 10V C302 C303 C304 C307 C308 1-164-943-11 1-164-943-11 1-164-943-11 1-164-943-11 1-127-772-11 CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP 0.01uF 0.01uF 0.01uF 0.01uF 33000PF 10% 10% 10% 10% 10% 16V 16V 16V 16V 10V C309 C310 C311 C312 1-164-874-11 1-164-874-11 1-164-943-11 1-117-370-11 CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP 100PF 100PF 0.01uF 10uF 5% 5% 10% 50V 50V 16V 10V 126 Remark Ref. No. Part No. Description Remark C313 1-107-820-11 CERAMIC CHIP 0.1uF 16V C314 C315 C316 C317 C318 1-164-947-11 1-164-947-11 1-124-779-00 1-164-854-11 1-164-852-11 CERAMIC CHIP CERAMIC CHIP ELECT CHIP CERAMIC CHIP CERAMIC CHIP 0.01uF 0.01uF 10uF 15PF 12PF 50V 50V 16V 50V 50V C319 C320 C355 C356 C401 1-164-862-11 1-164-947-11 1-164-947-11 1-164-947-11 1-125-777-11 CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP 33PF 0.01uF 0.01uF 0.01uF 0.1uF 10% 50V 50V 50V 50V 6.3V C402 C404 C405 C406 C407 1-117-370-11 1-125-777-11 1-124-779-00 1-164-939-11 1-117-370-11 CERAMIC CHIP CERAMIC CHIP ELECT CHIP CERAMIC CHIP CERAMIC CHIP 10uF 0.1uF 10% 10uF 20% 0.0022uF 10% 10uF 10V 6.3V 16V 50V 10V C408 C409 C410 C411 C412 1-125-777-11 1-164-939-11 1-124-779-00 1-125-777-11 1-164-939-11 CERAMIC CHIP CERAMIC CHIP ELECT CHIP CERAMIC CHIP CERAMIC CHIP 0.1uF 0.0022uF 10uF 0.1uF 0.0022uF 10% 10% 20% 10% 10% 6.3V 50V 16V 6.3V 50V C413 C414 C415 C416 C417 1-164-939-11 1-164-943-11 1-164-943-11 1-117-370-11 1-125-777-11 CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP 0.0022uF 0.01uF 0.01uF 10uF 0.1uF 10% 10% 10% 10% 50V 16V 16V 10V 6.3V C418 C419 C420 C421 C422 1-125-777-11 1-119-923-11 1-164-939-11 1-125-777-11 1-164-874-11 CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP 0.1uF 0.047uF 0.0022uF 0.1uF 100PF 10% 10% 10% 10% 5% 6.3V 10V 50V 6.3V 50V C423 C424 C425 C426 C427 1-125-777-11 1-107-819-11 1-164-939-11 1-164-943-11 1-125-891-11 CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP 0.1uF 0.022uF 0.0022uF 0.01uF 0.47uF 10% 10% 10% 10% 10% 6.3V 16V 50V 16V 10V C428 C432 C433 C434 C435 1-164-939-11 1-164-874-11 1-164-938-11 1-117-370-11 1-125-777-11 CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP 0.0022uF 100PF 0.0015uF 10uF 0.1uF 10% 5% 10% 10% 50V 50V 50V 10V 6.3V C436 C503 C504 C506 C508 1-125-777-11 1-127-772-11 1-127-772-11 1-164-934-11 1-164-937-11 CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP 0.1uF 33000PF 33000PF 330PF 0.001uF 10% 10% 10% 10% 10% 6.3V 10V 10V 50V 50V C509 C510 C512 C514 C519 1-164-934-11 1-164-937-11 1-164-943-11 1-164-943-11 1-164-943-11 CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP 330PF 0.001uF 0.01uF 0.01uF 0.01uF 10% 10% 10% 10% 10% 50V 50V 16V 16V 16V C521 C523 C525 C526 C527 1-164-938-11 1-164-938-11 1-125-777-11 1-126-395-11 1-125-777-11 CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP ELECT CERAMIC CHIP 0.0015uF 0.0015uF 0.1uF 22uF 0.1uF 10% 10% 10% 20% 10% 50V 50V 6.3V 16V 6.3V C528 1-126-395-11 ELECT 22uF 20% 16V 20% 5% 5% 5% HCD-C770/C990 DVD Ref. No. Part No. Description C529 C552 C600 C601 1-107-820-11 1-107-820-11 1-107-820-11 1-107-820-11 CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP 0.1uF 0.1uF 0.1uF 0.1uF Remark C602 C603 C604 C605 C606 1-117-681-11 1-164-858-11 1-164-868-11 1-107-820-11 1-126-206-11 ELECT CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP ELECT CHIP 100uF 22PF 56PF 0.1uF 100uF C607 C608 C609 C610 C611 1-107-820-11 1-107-820-11 1-107-820-11 1-126-205-11 1-164-947-11 CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP ELECT CHIP CERAMIC CHIP 0.1uF 0.1uF 0.1uF 47uF 0.01uF C612 C613 C614 C615 C616 1-117-370-11 1-117-370-11 1-124-779-00 1-107-820-11 1-107-820-11 CERAMIC CHIP CERAMIC CHIP ELECT CHIP CERAMIC CHIP CERAMIC CHIP 10uF 10uF 10uF 0.1uF 0.1uF C617 C618 C619 C620 C621 1-107-820-11 1-124-779-00 1-107-820-11 1-107-820-11 1-164-935-11 CERAMIC CHIP ELECT CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP 0.1uF 10uF 0.1uF 0.1uF 470PF C622 C623 C624 C625 C626 1-124-779-00 1-164-850-11 1-107-820-11 1-124-779-00 1-164-947-11 ELECT CHIP CERAMIC CHIP CERAMIC CHIP ELECT CHIP CERAMIC CHIP 10uF 10PF 0.1uF 10uF 0.01uF C627 C628 C629 C630 C631 1-164-947-11 1-124-779-00 1-164-935-11 1-117-370-11 1-107-820-11 CERAMIC CHIP ELECT CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP 0.01uF 10uF 470PF 10uF 0.1uF C632 C633 C634 C635 C636 1-164-947-11 1-107-820-11 1-107-820-11 1-164-947-11 1-107-820-11 CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP 0.01uF 0.1uF 0.1uF 0.01uF 0.1uF 50V 16V 16V 50V 16V C637 C638 C639 C640 C641 1-164-947-11 1-107-820-11 1-107-820-11 1-164-947-11 1-164-947-11 CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP 0.01uF 0.1uF 0.1uF 0.01uF 0.01uF 50V 16V 16V 50V 50V C642 C643 C644 C645 C646 1-164-947-11 1-126-246-11 1-164-947-11 1-164-882-11 1-164-947-11 CERAMIC CHIP ELECT CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP 0.01uF 220uF 0.01uF 220PF 0.01uF C647 C648 C650 C651 C652 1-164-947-11 1-107-820-11 1-164-947-11 1-164-947-11 1-126-246-11 CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP ELECT CHIP 0.01uF 0.1uF 0.01uF 0.01uF 220uF C653 C654 C655 C656 1-164-947-11 1-117-681-11 1-126-206-11 1-107-820-11 CERAMIC CHIP ELECT CHIP ELECT CHIP CERAMIC CHIP 0.01uF 100uF 100uF 0.1uF 16V 16V 16V 16V 20% 5% 5% 20% 20% 20% 20% 10% 20% 0.5PF 20% 20% 10% 20% 5% 20% 20% 20% 16V 50V 50V 16V 6.3V 16V 16V 16V 6.3V 50V 10V 10V 16V 16V 16V 16V 16V 16V 16V 50V 16V 50V 16V 16V 50V 50V 16V 50V 10V 16V 50V 4V 50V 16V 50V 50V 16V 50V 50V 4V 50V 16V 6.3V 16V Ref. No. Part No. Description Remark C657 1-107-820-11 CERAMIC CHIP 0.1uF 16V C658 C659 C660 C661 C662 1-164-935-11 1-164-882-11 1-164-947-11 1-164-947-11 1-164-882-11 CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP 470PF 220PF 0.01uF 0.01uF 220PF 10% 5% C663 C667 C668 C669 C670 1-164-935-11 1-117-370-11 1-164-947-11 1-164-947-11 1-164-947-11 CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP 470PF 10uF 0.01uF 0.01uF 0.01uF 10% C671 C672 C673 C674 C675 1-164-947-11 1-164-947-11 1-164-947-11 1-117-370-11 1-164-947-11 CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP 0.01uF 0.01uF 0.01uF 10uF 0.01uF 50V 50V 50V 10V 50V C676 C677 C678 C679 C702 1-164-947-11 1-164-947-11 1-164-882-11 1-164-947-11 1-117-370-11 CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP 0.01uF 0.01uF 220PF 0.01uF 10uF 5% 50V 50V 16V 50V 10V C703 C706 C708 C709 C711 1-107-820-11 1-107-820-11 1-164-937-11 1-107-820-11 1-164-943-11 CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP 0.1uF 0.1uF 0.001uF 0.1uF 0.01uF 10% 10% 16V 16V 50V 16V 16V C712 C713 C714 C715 C716 1-164-882-11 1-107-820-11 1-107-820-11 1-164-938-11 1-125-891-11 CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP 220PF 5% 0.1uF 0.1uF 0.0015uF 10% 0.47uF 10% 16V 16V 16V 50V 10V C717 C718 C720 C721 C722 1-164-943-11 1-107-820-11 1-125-777-11 1-125-777-11 1-107-820-11 CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP 0.01uF 0.1uF 0.1uF 0.1uF 0.1uF 16V 16V 6.3V 6.3V 16V C723 C724 C725 C726 C727 1-107-820-11 1-107-820-11 1-107-820-11 1-107-820-11 1-117-370-11 CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP 0.1uF 0.1uF 0.1uF 0.1uF 10uF C728 C729 C730 C740 C741 1-125-777-11 1-117-370-11 1-107-820-11 1-107-820-11 1-107-820-11 CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP 0.1uF 10uF 0.1uF 0.1uF 0.1uF C742 C743 C744 C745 C752 1-107-820-11 1-107-820-11 1-107-820-11 1-107-820-11 1-107-820-11 CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP 0.1uF 0.1uF 0.1uF 0.1uF 0.1uF 16V 16V 16V 16V 16V C760 C761 C762 C763 C764 1-107-820-11 1-107-820-11 1-107-820-11 1-107-820-11 1-107-820-11 CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP 0.1uF 0.1uF 0.1uF 0.1uF 0.1uF 16V 16V 16V 16V 16V C765 1-107-820-11 CERAMIC CHIP 0.1uF 16V 5% 10% 10% 10% 50V 16V 50V 50V 16V 50V 10V 50V 50V 50V 16V 16V 16V 16V 10V 10% 6.3V 10V 16V 16V 16V 127 HCD-C770/C990 DVD Ref. No. Remark Ref. No. Part No. Description Remark Part No. Description C766 C767 C768 C769 1-164-874-11 1-107-820-11 1-107-820-11 1-107-820-11 CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP 100PF 0.1uF 0.1uF 0.1uF C770 C771 C772 C773 C774 1-107-820-11 1-119-923-11 1-107-820-11 1-125-891-11 1-164-941-11 CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP 0.1uF 0.047uF 10% 0.1uF 0.47uF 10% 0.0047uF 10% 16V 10V 16V 10V 16V C775 C776 C777 C778 C779 1-107-820-11 1-107-820-11 1-107-820-11 1-107-820-11 1-117-370-11 CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP 0.1uF 0.1uF 0.1uF 0.1uF 10uF 16V 16V 16V 16V 10V C780 C781 C791 C793 C795 1-117-370-11 1-117-370-11 1-126-206-11 1-126-246-11 1-126-206-11 CERAMIC CHIP CERAMIC CHIP ELECT CHIP ELECT CHIP ELECT CHIP 10uF 10uF 100uF 220uF 100uF 10V 10V 6.3V 4V 6.3V C796 C797 C802 C803 C804 1-107-820-11 1-126-246-11 1-117-370-11 1-164-943-11 1-164-943-11 CERAMIC CHIP ELECT CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP 0.1uF 220uF 10uF 0.01uF 0.01uF 10% 10% 16V 4V 10V 16V 16V C807 C808 C809 C810 C811 1-164-943-11 1-164-874-11 1-164-943-11 1-164-943-11 1-164-943-11 CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP 0.01uF 100PF 0.01uF 0.01uF 0.01uF 10% 5% 10% 10% 10% 16V 50V 16V 16V 16V C812 C813 C815 C817 C818 1-164-943-11 1-164-943-11 1-164-943-11 1-164-943-11 1-164-943-11 CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP 0.01uF 0.01uF 0.01uF 0.01uF 0.01uF 10% 10% 10% 10% 10% 16V 16V 16V 16V 16V C819 C837 C838 C839 C840 1-164-943-11 1-164-943-11 1-164-943-11 1-164-943-11 1-117-370-11 CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP 0.01uF 0.01uF 0.01uF 0.01uF 10uF 10% 10% 10% 10% 16V 16V 16V 16V 10V C841 C842 C843 C848 C849 1-117-370-11 1-164-943-11 1-164-943-11 1-164-943-11 1-164-943-11 CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP 10uF 0.01uF 0.01uF 0.01uF 0.01uF 10% 10% 10% 10% 10V 16V 16V 16V 16V C854 C855 C856 C857 C861 1-164-943-11 1-164-943-11 1-164-943-11 1-164-943-11 1-164-943-11 CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP 0.01uF 0.01uF 0.01uF 0.01uF 0.01uF 10% 10% 10% 10% 10% 16V 16V 16V 16V 16V FB001 FB003 FB004 FB005 FB006 1-469-324-21 1-469-324-21 1-469-324-21 1-469-324-21 1-469-324-21 FERRITE FERRITE FERRITE FERRITE FERRITE 0uH 0uH 0uH 0uH 0uH C865 C866 C867 C870 C871 1-164-943-11 1-164-943-11 1-164-943-11 1-127-772-11 1-164-943-11 CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP 0.01uF 0.01uF 0.01uF 33000PF 0.01uF 10% 10% 10% 10% 10% 16V 16V 16V 10V 16V FB007 FB008 FB009 FB010 FB011 1-469-324-21 1-469-324-21 1-469-324-21 1-469-324-21 1-469-324-21 FERRITE FERRITE FERRITE FERRITE FERRITE 0uH 0uH 0uH 0uH 0uH C900 C901 C902 C903 1-107-820-11 1-164-943-11 1-107-820-11 1-126-206-11 CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP ELECT CHIP 0.1uF 0.01uF 0.1uF 100uF 16V 16V 16V 6.3V FB012 FB013 FB014 FB201 1-469-324-21 1-469-324-21 1-469-324-21 1-469-324-21 FERRITE FERRITE FERRITE FERRITE 0uH 0uH 0uH 0uH 5% 20% 20% 20% 20% 50V 16V 16V 16V C905 1-164-934-11 CERAMIC CHIP 330PF 10% 50V C906 C907 C908 C909 C910 1-164-934-11 1-164-937-11 1-164-874-11 1-164-222-91 1-104-905-11 CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP DOUBLE LAYER 330PF 0.001uF 100PF 0.22uF 0.22F 10% 10% 5% 50V 50V 50V 25V 5.5V C911 C912 C913 C914 C917 1-126-205-11 1-126-205-11 1-164-943-11 1-164-943-11 1-107-820-11 ELECT CHIP ELECT CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP 47uF 47uF 0.01uF 0.01uF 0.1uF 20% 20% 10% 10% 6.3V 6.3V 16V 16V 16V C918 C921 C922 C923 C924 1-164-874-11 1-164-874-11 1-107-820-11 1-107-820-11 1-107-820-11 CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP 100PF 100PF 0.1uF 0.1uF 0.1uF 5% 5% 50V 50V 16V 16V 16V C925 C926 C927 1-107-820-11 CERAMIC CHIP 1-107-820-11 CERAMIC CHIP 1-107-820-11 CERAMIC CHIP 0.1uF 0.1uF 0.1uF < CONNECTOR > CN001 CN002 CN003 CN004 CN005 1-784-371-31 1-778-957-11 1-784-373-31 1-784-376-31 1-778-691-11 CONNECTOR, FFC/FPC 12P CONNECTOR, FFC/FPC 29P CONNECTOR, FFC/FPC 14P CONNECTOR, FFC/FPC 17P CONNECTOR, FFC/FPC 19P CN006 CN008 CN201 * CN301 CN401 1-784-385-31 1-815-954-21 1-784-364-31 1-580-756-21 1-778-957-11 CONNECTOR, FFC/FPC 28P PIN, CONNECTOR (PC BOARD) 13P CONNECTOR, FFC/FPC 4P PIN, CONNECTOR (SMD) 7P CONNECTOR, FFC/FPC 29P CN900 1-784-367-31 CONNECTOR, FFC/FPC 8P < DIODE > 128 10% 20% D900 D901 D902 D903 D904 8-719-053-18 8-719-053-18 8-719-988-61 8-719-988-61 8-719-988-61 DIODE DIODE DIODE DIODE DIODE 1SR154-400TE-25 1SR154-400TE-25 1SS355TE-17 1SS355TE-17 1SS355TE-17 D906 D907 8-719-988-61 DIODE 1SS355TE-17 8-719-988-61 DIODE 1SS355TE-17 < FERRITE BEAD > 16V 16V 16V HCD-C770/C990 DVD Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark FB202 1-469-324-21 FERRITE 0uH IC607 8-759-698-76 IC CXD9617R FB901 FB902 1-469-324-21 FERRITE 1-469-324-21 FERRITE 0uH 0uH IC608 IC610 IC612 IC701 IC702 6-701-111-01 8-759-337-40 6-700-278-01 8-752-412-43 8-759-637-50 IC IC IC IC IC AK4382AVT-E2 NJM2904V (TE2) CXD9633Q CXD1882R TA48M025F (TE16L) IC703 IC706 IC801 IC802 IC803 8-759-058-43 8-759-564-30 8-752-407-50 8-759-058-64 6-702-563-01 IC IC IC IC IC NJM3404AV (TE2) MSM51V18165F-60TSKR1 CXD2752R TC7S32FU (TE85R) TC7W74FK-TE85L IC808 IC812 IC813 IC814 IC900 6-702-336-01 8-759-549-15 8-759-549-15 8-759-680-48 8-759-238-47 IC IC IC IC IC MSM56V16160F-8TK7R1 SN74LV245APWR SN74LV245APWR TC7WH157FK (TE85R) TC74HCT7007AF (EL) IC901 IC902 IC903 IC904 IC905 6-801-944-01 8-759-828-32 8-759-427-92 8-759-326-78 8-759-234-20 IC IC IC IC IC uPD703033BYGF-M01-3BA PT8300 PST9126NL PST9140NL TC7S08F-TE85L IC906 IC907 8-759-828-32 IC PT8300 8-759-326-78 IC PST9140NL < FILTER/FERRITE BEAD > FL003 FL004 FL005 FL006 FL202 1-234-177-21 1-234-177-21 1-233-893-21 1-234-177-21 1-233-893-21 FERRITE 0uH FERRITE 0uH FILTER, CHIP EMI FERRITE 0uH FILTER, CHIP EMI FL203 FL204 FL301 FL303 FL304 1-233-893-21 1-233-893-21 1-233-893-21 1-233-893-21 1-233-893-21 FILTER, CHIP EMI FILTER, CHIP EMI FILTER, CHIP EMI FILTER, CHIP EMI FILTER, CHIP EMI FL401 FL402 FL603 FL604 FL605 1-233-893-21 1-233-893-21 1-234-177-21 1-234-177-21 1-234-177-21 FILTER, CHIP EMI FILTER, CHIP EMI FERRITE 0uH FERRITE 0uH FERRITE 0uH FL606 FL701 FL702 FL703 FL704 1-234-177-21 1-233-893-21 1-233-893-21 1-233-893-21 1-233-893-21 FERRITE 0uH FILTER, CHIP EMI FILTER, CHIP EMI FILTER, CHIP EMI FILTER, CHIP EMI FL705 FL706 FL807 FL810 FL811 1-233-893-21 1-233-893-21 1-233-893-21 1-233-893-21 1-233-893-21 FILTER, CHIP EMI FILTER, CHIP EMI FILTER, CHIP EMI FILTER, CHIP EMI FILTER, CHIP EMI FL812 1-233-893-21 FILTER, CHIP EMI < RESISTOR > JW900 JW903 1-218-941-81 RES-CHIP 1-218-990-11 SHORT CHIP 100 0 5% 1/16W < COIL > L301 L600 L602 1-414-754-11 INDUCTOR 1-414-754-11 INDUCTOR 1-414-754-11 INDUCTOR 10uH 10uH 10uH < IC > < TRANSISTOR > IC001 IC002 IC003 IC004 IC005 8-759-583-47 8-759-473-95 8-759-473-95 8-759-473-95 8-759-583-47 IC IC IC IC IC uPC2933T-E2 uPC2905T-E1 uPC2905T-E1 uPC2905T-E1 uPC2933T-E2 IC006 IC202 IC203 IC204 IC206 6-700-398-01 6-702-368-01 8-759-668-01 6-802-150-01 6-700-404-01 IC IC IC IC IC uPC2918T-E1 MT48LC4M32B2-7 BR9040F-D-E2 MR27V3202F-8PTPZ020 ZIVA-5P-B0 IC215 IC301 IC302 IC303 IC401 6-700-437-01 8-752-931-99 8-759-640-41 6-700-406-01 8-752-408-73 IC IC IC IC IC SN74ALVCH16841DGGR CXP973064-220R BR24C08F-E2 IMIC6007BT-D CXD3068Q IC402 IC501 IC600 IC601 IC602 8-759-058-43 6-702-157-01 8-759-052-52 6-701-011-01 8-759-560-56 IC IC IC IC IC NJM3404AV (TE2) FAN8035L NJM78M05DL1A-TE1 uPC2910T-E1 PCM1800E/2K IC603 IC604 IC605 IC606 8-759-337-40 8-759-538-16 8-759-835-63 8-759-825-15 IC IC IC IC NJM2904V (TE2) IDT71V016S15PH-AUTL NJM2391DL1-26 (TE1) LC89056W-E Q001 Q002 Q003 Q004 Q301 8-729-901-00 6-550-220-01 8-729-901-00 6-550-220-01 8-729-900-53 TRANSISTOR TRANSISTOR TRANSISTOR TRANSISTOR TRANSISTOR DTC124EKA-T146 2SB906 (TE16L) DTC124EKA-T146 2SB906 (TE16L) DTC114EKA-T146 Q302 Q900 Q901 Q902 Q903 8-729-900-53 8-729-027-23 8-729-230-63 8-729-027-23 8-729-024-91 TRANSISTOR TRANSISTOR TRANSISTOR TRANSISTOR TRANSISTOR DTC114EKA-T146 DTA114EKA-T146 2SD1819A-QRS-TX DTA114EKA-T146 2SC2712-GL-TE85L Q906 Q907 Q908 Q909 Q910 8-729-024-91 8-729-024-91 8-729-901-00 8-729-901-00 8-729-901-00 TRANSISTOR TRANSISTOR TRANSISTOR TRANSISTOR TRANSISTOR 2SC2712-GL-TE85L 2SC2712-GL-TE85L DTC124EKA-T146 DTC124EKA-T146 DTC124EKA-T146 Q911 Q912 Q913 Q914 8-729-901-00 8-729-024-91 8-729-026-49 8-729-024-91 TRANSISTOR TRANSISTOR TRANSISTOR TRANSISTOR DTC124EKA-T146 2SC2712-GL-TE85L 2SA1037AK-T146-QR 2SC2712-GL-TE85L < RESISTOR > R001 R002 1-218-990-11 SHORT CHIP 1-218-990-11 SHORT CHIP 0 0 129 HCD-C770/C990 DVD Ref. No. Part No. Description Remark R003 R004 R005 1-218-990-11 SHORT CHIP 1-218-990-11 SHORT CHIP 1-218-990-11 SHORT CHIP 0 0 0 R006 R007 R009 R011 R012 1-218-990-11 1-218-990-11 1-218-953-11 1-216-198-00 1-218-990-11 SHORT CHIP SHORT CHIP RES-CHIP RES-CHIP SHORT CHIP 0 0 1K 1K 0 R013 R014 R015 R016 R017 1-218-990-11 1-218-990-11 1-218-990-11 1-218-990-11 1-218-990-11 SHORT CHIP SHORT CHIP SHORT CHIP SHORT CHIP SHORT CHIP 0 0 0 0 0 R018 R019 R020 R021 R022 1-218-990-11 1-218-957-11 1-218-990-11 1-218-990-11 1-218-990-11 SHORT CHIP RES-CHIP SHORT CHIP SHORT CHIP SHORT CHIP 0 2.2K 0 0 0 (AEP) R023 R024 R025 R026 R027 1-218-990-11 1-218-990-11 1-218-990-11 1-218-990-11 1-218-990-11 SHORT CHIP SHORT CHIP SHORT CHIP SHORT CHIP SHORT CHIP 0 0 (AEP) 0 0 0 R028 R029 R030 R031 R032 1-218-990-11 1-218-990-11 1-218-990-11 1-218-990-11 1-218-990-11 SHORT CHIP SHORT CHIP SHORT CHIP SHORT CHIP SHORT CHIP 0 0 0 0 0 R033 R034 R035 R036 R037 1-218-990-11 1-218-990-11 1-218-990-11 1-218-990-11 1-218-990-11 SHORT CHIP SHORT CHIP SHORT CHIP SHORT CHIP SHORT CHIP 0 0 0 0 0 R038 R039 R040 R041 R042 1-218-990-11 1-218-990-11 1-218-990-11 1-218-990-11 1-218-990-11 SHORT CHIP SHORT CHIP SHORT CHIP SHORT CHIP SHORT CHIP 0 0 0 0 0 R043 R044 R045 R046 R047 1-218-990-11 1-218-990-11 1-218-990-11 1-218-990-11 1-218-990-11 SHORT CHIP SHORT CHIP SHORT CHIP SHORT CHIP SHORT CHIP 0 0 0 0 0 R048 R049 R050 R051 R052 1-218-990-11 1-218-990-11 1-218-990-11 1-218-990-11 1-218-990-11 SHORT CHIP SHORT CHIP SHORT CHIP SHORT CHIP SHORT CHIP 0 0 0 0 0 R053 R054 R055 R056 R057 1-218-990-11 1-218-990-11 1-218-990-11 1-218-990-11 1-218-990-11 SHORT CHIP SHORT CHIP SHORT CHIP SHORT CHIP SHORT CHIP 0 0 0 0 0 R058 R059 R060 R061 R062 1-218-990-11 1-218-990-11 1-218-990-11 1-218-990-11 1-218-990-11 SHORT CHIP SHORT CHIP SHORT CHIP SHORT CHIP SHORT CHIP 0 0 0 0 0 130 5% 5% 5% 1/16W 1/8W 1/16W Ref. No. Part No. Description Remark R063 R064 R065 R066 R067 1-218-990-11 1-218-990-11 1-218-990-11 1-218-953-11 1-218-949-11 SHORT CHIP SHORT CHIP SHORT CHIP RES-CHIP RES-CHIP 0 0 0 1K 470 R068 R069 R070 R071 R073 1-218-990-11 1-218-990-11 1-218-990-11 1-218-990-11 1-218-990-11 SHORT CHIP SHORT CHIP SHORT CHIP SHORT CHIP SHORT CHIP 0 0 0 0 0 R074 R075 R076 R079 R202 1-218-990-11 1-218-990-11 1-218-990-11 1-216-198-00 1-218-990-11 SHORT CHIP SHORT CHIP SHORT CHIP RES-CHIP SHORT CHIP 0 0 0 1K 0 R203 R206 R207 R208 R209 1-208-869-11 1-218-990-11 1-218-285-11 1-218-285-11 1-218-285-11 METAL CHIP SHORT CHIP RES-CHIP RES-CHIP RES-CHIP R210 R211 R212 R213 R214 1-218-285-11 1-218-990-11 1-208-643-11 1-218-990-11 1-218-990-11 R215 R216 R217 R218 R219 5% 5% 1/16W 1/16W 5% 1/8W 180 0 75 75 75 0.5% 1/16W 5% 5% 5% 1/10W 1/10W 1/10W RES-CHIP SHORT CHIP RES-CHIP SHORT CHIP SHORT CHIP 75 0 22 0 0 5% 1/10W 5% 1/16W 1-218-935-11 1-218-935-11 1-218-935-11 1-218-935-11 1-218-935-11 RES-CHIP RES-CHIP RES-CHIP RES-CHIP RES-CHIP 33 33 33 33 33 5% 5% 5% 5% 5% 1/16W 1/16W 1/16W 1/16W 1/16W R220 R221 R222 R223 R224 1-218-935-11 1-218-935-11 1-218-935-11 1-218-935-11 1-218-935-11 RES-CHIP RES-CHIP RES-CHIP RES-CHIP RES-CHIP 33 33 33 33 33 5% 5% 5% 5% 5% 1/16W 1/16W 1/16W 1/16W 1/16W R225 R226 R227 R228 R229 1-218-935-11 1-218-961-11 1-218-935-11 1-218-935-11 1-218-935-11 RES-CHIP RES-CHIP RES-CHIP RES-CHIP RES-CHIP 33 4.7K 33 33 33 5% 5% 5% 5% 5% 1/16W 1/16W 1/16W 1/16W 1/16W R230 R231 R232 R233 R234 1-218-935-11 1-218-935-11 1-218-990-11 1-218-965-11 1-218-285-11 RES-CHIP RES-CHIP SHORT CHIP RES-CHIP RES-CHIP 33 33 0 10K 75 5% 5% 1/16W 1/16W 5% 5% 1/16W 1/10W R235 R236 R238 R239 R241 1-218-990-11 1-208-683-11 1-218-941-81 1-218-973-11 1-218-965-11 SHORT CHIP METAL CHIP RES-CHIP RES-CHIP RES-CHIP 0 1K 100 47K 10K 0.5% 5% 5% 5% 1/16W 1/16W 1/16W 1/16W R242 R243 R244 R245 R246 1-218-965-11 1-218-965-11 1-218-961-11 1-218-961-11 1-218-961-11 RES-CHIP RES-CHIP RES-CHIP RES-CHIP RES-CHIP 10K 10K 4.7K 4.7K 4.7K 5% 5% 5% 5% 5% 1/16W 1/16W 1/16W 1/16W 1/16W R247 R248 1-218-961-11 RES-CHIP 1-218-961-11 RES-CHIP 4.7K 4.7K 5% 5% 1/16W 1/16W HCD-C770/C990 DVD Ref. No. Part No. Description Remark R249 R250 R251 1-218-961-11 RES-CHIP 1-218-961-11 RES-CHIP 1-218-965-11 RES-CHIP 4.7K 4.7K 10K 5% 5% 5% 1/16W 1/16W 1/16W R252 R253 R256 R257 R258 1-218-961-11 1-218-961-11 1-218-961-11 1-216-864-11 1-216-864-11 RES-CHIP RES-CHIP RES-CHIP METAL CHIP METAL CHIP 4.7K 4.7K 4.7K 0 0 5% 5% 5% 5% 5% 1/16W 1/16W 1/16W 1/10W 1/10W R259 R260 R261 R262 R263 1-216-864-11 1-216-864-11 1-216-864-11 1-218-285-11 1-218-285-11 METAL CHIP METAL CHIP METAL CHIP RES-CHIP RES-CHIP 0 0 0 75 75 5% 5% 5% 5% 5% 1/10W 1/10W 1/10W 1/10W 1/10W R264 R265 R266 R303 R304 1-218-285-11 1-218-285-11 1-218-285-11 1-208-643-11 1-208-643-11 RES-CHIP RES-CHIP RES-CHIP RES-CHIP RES-CHIP 75 75 75 22 22 5% 5% 5% 5% 5% 1/10W 1/10W 1/10W 1/16W 1/16W R305 R306 R307 R308 R309 1-218-965-11 1-208-643-11 1-208-643-11 1-208-643-11 1-218-990-11 RES-CHIP RES-CHIP RES-CHIP RES-CHIP SHORT CHIP 10K 22 22 22 0 5% 5% 5% 5% 1/16W 1/16W 1/16W 1/16W R311 R312 R313 R314 R315 1-208-643-11 1-218-965-11 1-218-990-11 1-218-990-11 1-218-990-11 RES-CHIP RES-CHIP SHORT CHIP SHORT CHIP SHORT CHIP 22 10K 0 0 0 5% 5% 1/16W 1/16W R316 R317 R318 R319 R320 1-218-965-11 1-218-941-81 1-218-941-81 1-218-990-11 1-218-990-11 RES-CHIP RES-CHIP RES-CHIP SHORT CHIP SHORT CHIP 10K 100 100 0 0 5% 5% 5% R321 R322 R323 R324 R326 1-218-941-81 1-218-990-11 1-218-941-81 1-218-990-11 1-218-941-81 RES-CHIP SHORT CHIP RES-CHIP SHORT CHIP RES-CHIP 100 0 100 0 100 5% 1/16W 5% 1/16W 5% 1/16W R327 R328 R329 R330 R331 1-218-941-81 1-218-941-81 1-218-941-81 1-218-941-81 1-218-945-11 RES-CHIP RES-CHIP RES-CHIP RES-CHIP RES-CHIP 100 100 100 100 220 5% 5% 5% 5% 5% 1/16W 1/16W 1/16W 1/16W 1/16W R332 R333 R335 R336 R337 1-218-965-11 1-218-965-11 1-208-643-11 1-218-990-11 1-218-941-81 RES-CHIP RES-CHIP RES-CHIP SHORT CHIP RES-CHIP 10K 10K 22 0 100 5% 5% 5% 1/16W 1/16W 1/16W 5% 1/16W R338 R339 R340 R341 R342 1-218-990-11 1-218-990-11 1-218-990-11 1-218-990-11 1-218-990-11 SHORT CHIP SHORT CHIP SHORT CHIP SHORT CHIP SHORT CHIP 0 0 0 0 0 R344 R345 R346 R349 R350 1-218-953-11 1-218-990-11 1-218-953-11 1-218-990-11 1-218-941-81 RES-CHIP SHORT CHIP RES-CHIP SHORT CHIP RES-CHIP 1K 0 1K 0 100 1/16W 1/16W 1/16W 5% 1/16W 5% 1/16W 5% 1/16W Ref. No. Part No. Description Remark R351 R352 R353 R354 R355 1-218-990-11 1-218-990-11 1-218-965-11 1-218-989-11 1-208-643-11 SHORT CHIP SHORT CHIP RES-CHIP RES-CHIP RES-CHIP 0 0 10K 1M 22 5% 5% 5% 1/16W 1/16W 1/16W R356 R357 R358 R359 R360 1-218-939-11 1-218-939-11 1-218-939-11 1-218-965-11 1-218-965-11 RES-CHIP RES-CHIP RES-CHIP RES-CHIP RES-CHIP 68 68 68 10K 10K 5% 5% 5% 5% 5% 1/16W 1/16W 1/16W 1/16W 1/16W R361 R362 R363 R364 R401 1-218-965-11 1-218-948-11 1-218-965-11 1-218-961-11 1-218-990-11 RES-CHIP RES-CHIP RES-CHIP RES-CHIP SHORT CHIP 10K 390 10K 4.7K 0 5% 5% 5% 5% 1/16W 1/16W 1/16W 1/16W R402 R403 R404 R405 R406 1-218-990-11 1-218-990-11 1-218-990-11 1-218-990-11 1-218-990-11 SHORT CHIP SHORT CHIP SHORT CHIP SHORT CHIP SHORT CHIP 0 0 0 0 0 R407 R408 R409 R410 R411 1-218-990-11 1-218-990-11 1-218-990-11 1-218-990-11 1-218-990-11 SHORT CHIP SHORT CHIP SHORT CHIP SHORT CHIP SHORT CHIP 0 0 0 0 0 R412 R413 R415 R416 R417 1-218-965-11 1-218-965-11 1-218-990-11 1-218-990-11 1-218-990-11 RES-CHIP RES-CHIP SHORT CHIP SHORT CHIP SHORT CHIP 10K 10K 0 0 0 5% 5% 1/16W 1/16W R418 R419 R420 R421 R423 1-218-965-11 1-218-975-11 1-218-990-11 1-218-953-11 1-218-953-11 RES-CHIP RES-CHIP SHORT CHIP RES-CHIP RES-CHIP 10K 68K 0 1K 1K 5% 5% 1/16W 1/16W 5% 5% 1/16W 1/16W R424 R425 R426 R427 R428 1-218-990-11 1-218-953-11 1-218-953-11 1-218-990-11 1-218-953-11 SHORT CHIP RES-CHIP RES-CHIP SHORT CHIP RES-CHIP 0 1K 1K 0 1K 5% 5% 1/16W 1/16W 5% 1/16W R429 R430 R431 R432 R433 1-218-953-11 1-218-953-11 1-218-990-11 1-218-990-11 1-218-973-11 RES-CHIP RES-CHIP SHORT CHIP SHORT CHIP RES-CHIP 1K 1K 0 0 47K 5% 5% 1/16W 1/16W 5% 1/16W R434 R435 R436 R437 R438 1-218-973-11 1-218-990-11 1-218-990-11 1-218-973-11 1-218-990-11 RES-CHIP SHORT CHIP SHORT CHIP RES-CHIP SHORT CHIP 47K 0 0 47K 0 5% 1/16W 5% 1/16W R439 R440 R441 R442 R443 1-218-947-11 1-218-973-11 1-218-953-11 1-218-965-11 1-218-973-11 RES-CHIP RES-CHIP RES-CHIP RES-CHIP RES-CHIP 330 47K 1K 10K 47K 5% 5% 5% 5% 5% 1/16W 1/16W 1/16W 1/16W 1/16W R444 R445 1-218-985-11 RES-CHIP 1-218-953-11 RES-CHIP 470K 1K 5% 5% 1/16W 1/16W 131 HCD-C770/C990 DVD Ref. No. Part No. Description Remark R446 R447 R448 1-218-965-11 RES-CHIP 1-218-965-11 RES-CHIP 1-218-953-11 RES-CHIP 10K 10K 1K 5% 5% 5% 1/16W 1/16W 1/16W R449 R450 R451 R452 R453 1-218-971-11 1-218-953-11 1-218-965-11 1-218-989-11 1-218-989-11 RES-CHIP RES-CHIP RES-CHIP RES-CHIP RES-CHIP 33K 1K 10K 1M 1M 5% 5% 5% 5% 5% 1/16W 1/16W 1/16W 1/16W 1/16W R455 R457 R510 R511 R512 1-218-977-11 1-218-959-11 1-208-939-11 1-208-939-11 1-218-974-11 RES-CHIP RES-CHIP METAL CHIP METAL CHIP METAL CHIP 100K 3.3K 150K 150K 56K 5% 5% 0.5% 0.5% 0.5% 1/16W 1/16W 1/16W 1/16W 1/16W R513 R516 R517 R519 R520 1-218-974-11 1-218-961-11 1-218-957-11 1-218-977-11 1-218-965-11 METAL CHIP RES-CHIP RES-CHIP RES-CHIP RES-CHIP 56K 4.7K 2.2K 100K 10K 0.5% 5% 5% 5% 5% 1/16W 1/16W 1/16W 1/16W 1/16W R521 R522 R523 R524 R525 1-218-977-11 1-218-961-11 1-218-965-11 1-218-965-11 1-218-965-11 RES-CHIP RES-CHIP RES-CHIP RES-CHIP RES-CHIP 100K 4.7K 10K 10K 10K 5% 5% 5% 5% 5% 1/16W 1/16W 1/16W 1/16W 1/16W R527 R528 R529 R530 R531 1-218-957-11 1-218-990-11 1-218-971-11 1-218-974-11 1-218-990-11 RES-CHIP SHORT CHIP RES-CHIP RES-CHIP SHORT CHIP 2.2K 0 33K 56K 0 5% 1/16W 5% 5% 1/16W 1/16W R532 R533 R534 R535 R536 1-218-990-11 1-218-971-11 1-218-974-11 1-218-990-11 1-220-210-11 SHORT CHIP RES-CHIP RES-CHIP SHORT CHIP RES-CHIP 0 33K 56K 0 200K 5% 5% 1/16W 1/16W 5% 1/16W R538 R540 R541 R544 R545 1-218-977-11 1-218-965-11 1-218-977-11 1-218-977-11 1-218-977-11 RES-CHIP RES-CHIP RES-CHIP RES-CHIP RES-CHIP 100K 10K 100K 100K 100K 5% 5% 5% 5% 5% 1/16W 1/16W 1/16W 1/16W 1/16W R553 R554 R579 R580 R581 1-218-990-11 1-218-990-11 1-218-964-11 1-218-971-11 1-218-966-81 SHORT CHIP SHORT CHIP RES-CHIP RES-CHIP RES-CHIP 0 0 8.2K 33K 12K 5% 5% 5% 1/16W 1/16W 1/16W R582 R583 R598 R600 R602 1-218-965-11 1-218-965-11 1-218-990-11 1-218-941-81 1-218-989-11 RES-CHIP RES-CHIP SHORT CHIP RES-CHIP RES-CHIP 10K 10K 0 100 1M 5% 5% 1/16W 1/16W 5% 5% 1/16W 1/16W R603 R604 R605 R606 R607 1-218-941-81 1-218-941-81 1-218-941-81 1-218-941-81 1-218-941-81 RES-CHIP RES-CHIP RES-CHIP RES-CHIP RES-CHIP 100 100 100 100 100 5% 5% 5% 5% 5% 1/16W 1/16W 1/16W 1/16W 1/16W R608 R609 R610 R611 R612 1-218-959-11 1-218-949-11 1-218-957-11 1-218-941-81 1-218-973-11 RES-CHIP RES-CHIP RES-CHIP RES-CHIP RES-CHIP 3.3K 470 2.2K 100 47K 5% 5% 5% 5% 5% 1/16W 1/16W 1/16W 1/16W 1/16W 132 Ref. No. Part No. Description Remark R613 R614 R615 R616 R617 1-218-961-11 1-218-971-11 1-218-961-11 1-218-962-11 1-218-990-11 RES-CHIP RES-CHIP RES-CHIP RES-CHIP SHORT CHIP 4.7K 33K 4.7K 5.6K 0 5% 5% 5% 5% 1/16W 1/16W 1/16W 1/16W R618 R619 R620 R621 R622 1-218-961-11 1-218-973-11 1-218-941-81 1-218-941-81 1-218-941-81 RES-CHIP RES-CHIP RES-CHIP RES-CHIP RES-CHIP 4.7K 47K 100 100 100 5% 5% 5% 5% 5% 1/16W 1/16W 1/16W 1/16W 1/16W R623 R624 R625 R626 R627 1-218-941-81 1-218-941-81 1-218-959-11 1-218-953-11 1-218-957-11 RES-CHIP RES-CHIP RES-CHIP RES-CHIP RES-CHIP 100 100 3.3K 1K 2.2K 5% 5% 5% 5% 5% 1/16W 1/16W 1/16W 1/16W 1/16W R628 R629 R630 R631 R634 1-218-941-81 1-218-941-81 1-218-949-11 1-218-941-81 1-218-953-11 RES-CHIP RES-CHIP RES-CHIP RES-CHIP RES-CHIP 100 100 470 100 1K 5% 5% 5% 5% 5% 1/16W 1/16W 1/16W 1/16W 1/16W R635 R636 R637 R639 R640 1-218-965-11 1-218-961-11 1-218-941-81 1-218-941-81 1-218-941-81 RES-CHIP RES-CHIP RES-CHIP RES-CHIP RES-CHIP 10K 4.7K 100 100 100 5% 5% 5% 5% 5% 1/16W 1/16W 1/16W 1/16W 1/16W R642 R644 R645 R646 R647 1-218-941-81 1-218-965-11 1-218-965-11 1-218-961-11 1-218-945-11 RES-CHIP RES-CHIP RES-CHIP RES-CHIP RES-CHIP 100 10K 10K 4.7K 220 5% 5% 5% 5% 5% 1/16W 1/16W 1/16W 1/16W 1/16W R648 R649 R650 R651 R652 1-218-941-81 1-218-961-11 1-218-961-11 1-218-965-11 1-218-961-11 RES-CHIP RES-CHIP RES-CHIP RES-CHIP RES-CHIP 100 4.7K 4.7K 10K 4.7K 5% 5% 5% 5% 5% 1/16W 1/16W 1/16W 1/16W 1/16W R653 R654 R655 R656 R657 1-218-961-11 1-218-945-11 1-218-941-81 1-218-990-11 1-218-953-11 RES-CHIP RES-CHIP RES-CHIP SHORT CHIP RES-CHIP 4.7K 220 100 0 1K 5% 5% 5% 1/16W 1/16W 1/16W 5% 1/16W R658 R659 R660 R661 R662 1-218-941-81 1-218-935-11 1-218-945-11 1-218-941-81 1-218-941-81 RES-CHIP RES-CHIP RES-CHIP RES-CHIP RES-CHIP 100 33 220 100 100 5% 5% 5% 5% 5% 1/16W 1/16W 1/16W 1/16W 1/16W R663 R664 R665 R666 R667 1-218-941-81 1-218-941-81 1-218-965-11 1-218-941-81 1-218-941-81 RES-CHIP RES-CHIP RES-CHIP RES-CHIP RES-CHIP 100 100 10K 100 100 5% 5% 5% 5% 5% 1/16W 1/16W 1/16W 1/16W 1/16W R668 R669 R671 R672 R673 1-218-953-11 1-218-953-11 1-218-941-81 1-218-941-81 1-218-945-11 RES-CHIP RES-CHIP RES-CHIP RES-CHIP RES-CHIP 1K 1K 100 100 220 5% 5% 5% 5% 5% 1/16W 1/16W 1/16W 1/16W 1/16W R674 R675 1-218-945-11 RES-CHIP 1-218-945-11 RES-CHIP 220 220 5% 5% 1/16W 1/16W HCD-C770/C990 DVD Ref. No. Part No. Description Remark R676 R677 R679 1-218-945-11 RES-CHIP 1-218-945-11 RES-CHIP 1-218-941-81 RES-CHIP 220 220 100 5% 5% 5% 1/16W 1/16W 1/16W R680 R682 R684 R685 R686 1-218-941-81 1-218-965-11 1-218-965-11 1-218-953-11 1-218-965-11 RES-CHIP RES-CHIP RES-CHIP RES-CHIP RES-CHIP 100 10K 10K 1K 10K 5% 5% 5% 5% 5% 1/16W 1/16W 1/16W 1/16W 1/16W R687 R688 R689 R692 R695 1-218-953-11 1-218-965-11 1-218-965-11 1-218-941-81 1-218-941-81 RES-CHIP RES-CHIP RES-CHIP RES-CHIP RES-CHIP 1K 10K 10K 100 100 5% 5% 5% 5% 5% 1/16W 1/16W 1/16W 1/16W 1/16W R696 R699 R700 R702 R703 1-218-945-11 1-218-941-81 1-218-965-11 1-218-965-11 1-218-965-11 RES-CHIP RES-CHIP RES-CHIP RES-CHIP RES-CHIP 220 100 10K 10K 10K 5% 5% 5% 5% 5% 1/16W 1/16W 1/16W 1/16W 1/16W R704 R705 R706 R707 R708 1-218-965-11 1-218-965-11 1-218-965-11 1-218-941-81 1-218-989-11 RES-CHIP RES-CHIP RES-CHIP RES-CHIP RES-CHIP 10K 10K 10K 100 1M 5% 5% 5% 5% 5% 1/16W 1/16W 1/16W 1/16W 1/16W R709 R710 R711 R712 R713 1-218-975-11 1-218-965-11 1-218-957-11 1-218-965-11 1-218-965-11 RES-CHIP RES-CHIP RES-CHIP RES-CHIP RES-CHIP 68K 10K 2.2K 10K 10K 5% 5% 5% 5% 5% 1/16W 1/16W 1/16W 1/16W 1/16W R714 R715 R716 R717 R718 1-218-965-11 1-218-965-11 1-218-941-81 1-218-977-11 1-218-965-11 RES-CHIP RES-CHIP RES-CHIP RES-CHIP RES-CHIP 10K 10K 100 100K 10K 5% 5% 5% 5% 5% 1/16W 1/16W 1/16W 1/16W 1/16W R719 R720 R721 R724 R725 1-218-953-11 1-218-953-11 1-208-719-11 1-208-683-11 1-208-689-11 RES-CHIP RES-CHIP METAL CHIP METAL CHIP METAL CHIP 1K 1K 33K 1K 1.8K 5% 5% 0.5% 0.5% 0.5% 1/16W 1/16W 1/16W 1/16W 1/16W R726 R727 R728 R729 R730 1-208-935-11 1-208-695-11 1-208-707-11 1-218-964-11 1-208-643-11 METAL CHIP METAL CHIP METAL CHIP RES-CHIP RES-CHIP 100K 3.3K 10K 8.2K 22 0.5% 0.5% 0.5% 5% 5% 1/16W 1/16W 1/16W 1/16W 1/16W R731 R732 R735 R737 R738 1-208-643-11 1-218-965-11 1-218-965-11 1-218-965-11 1-208-643-11 RES-CHIP RES-CHIP RES-CHIP RES-CHIP RES-CHIP 22 10K 10K 10K 22 5% 5% 5% 5% 5% 1/16W 1/16W 1/16W 1/16W 1/16W R741 R742 R743 R744 R745 1-208-643-11 1-208-643-11 1-208-643-11 1-208-643-11 1-218-973-11 RES-CHIP RES-CHIP RES-CHIP RES-CHIP RES-CHIP 22 22 22 22 47K 5% 5% 5% 5% 5% 1/16W 1/16W 1/16W 1/16W 1/16W R746 R747 R748 R750 R752 1-218-973-11 1-218-971-11 1-218-971-11 1-218-965-11 1-218-990-11 RES-CHIP RES-CHIP RES-CHIP RES-CHIP SHORT CHIP 47K 33K 33K 10K 0 5% 5% 5% 5% 1/16W 1/16W 1/16W 1/16W Ref. No. Part No. Description Remark R753 R754 R755 R756 R757 1-218-990-11 1-218-990-11 1-218-990-11 1-218-990-11 1-218-990-11 SHORT CHIP SHORT CHIP SHORT CHIP SHORT CHIP SHORT CHIP 0 0 0 0 0 R758 R759 R762 R763 R764 1-218-990-11 1-218-990-11 1-218-969-11 1-218-964-11 1-218-989-11 SHORT CHIP SHORT CHIP RES-CHIP RES-CHIP RES-CHIP 0 0 22K 8.2K 1M R765 R766 R767 R770 R771 1-218-969-11 1-218-990-11 1-218-973-11 1-218-990-11 1-218-957-11 RES-CHIP SHORT CHIP RES-CHIP SHORT CHIP RES-CHIP 22K 0 47K 0 2.2K R772 R775 R776 R777 R778 1-208-643-11 1-218-990-11 1-218-990-11 1-218-990-11 1-218-977-11 RES-CHIP SHORT CHIP SHORT CHIP SHORT CHIP RES-CHIP 22 0 0 0 100K R780 R781 R799 R800 R803 1-218-990-11 1-218-990-11 1-218-990-11 1-218-961-11 1-218-941-81 SHORT CHIP SHORT CHIP SHORT CHIP RES-CHIP RES-CHIP R804 R805 R821 R822 R823 1-218-990-11 1-218-965-11 1-208-643-11 1-208-643-11 1-208-643-11 R826 R827 R828 R829 R830 5% 5% 5% 1/16W 1/16W 1/16W 5% 1/16W 5% 1/16W 5% 1/16W 5% 1/16W 5% 1/16W 0 0 0 4.7K 100 5% 5% 1/16W 1/16W SHORT CHIP RES-CHIP RES-CHIP RES-CHIP RES-CHIP 0 10K 22 22 22 5% 5% 5% 5% 1/16W 1/16W 1/16W 1/16W 1-208-643-11 1-218-941-81 1-218-961-11 1-218-941-81 1-218-961-11 RES-CHIP RES-CHIP RES-CHIP RES-CHIP RES-CHIP 22 100 4.7K 100 4.7K 5% 5% 5% 5% 5% 1/16W 1/16W 1/16W 1/16W 1/16W R831 R833 R834 R835 R836 1-218-971-11 1-218-990-11 1-218-990-11 1-218-990-11 1-218-990-11 RES-CHIP SHORT CHIP SHORT CHIP SHORT CHIP SHORT CHIP 33K 0 0 0 0 5% 1/16W R837 R838 R839 R840 R841 1-218-990-11 1-218-990-11 1-218-961-11 1-218-990-11 1-218-990-11 SHORT CHIP SHORT CHIP RES-CHIP SHORT CHIP SHORT CHIP 0 0 4.7K 0 0 5% 1/16W R842 R843 R844 R845 R846 1-218-965-11 1-218-990-11 1-218-990-11 1-218-990-11 1-218-990-11 RES-CHIP SHORT CHIP SHORT CHIP SHORT CHIP SHORT CHIP 10K 0 0 0 0 5% 1/16W R847 R848 R849 R850 R851 1-208-643-11 1-208-643-11 1-208-643-11 1-208-643-11 1-218-990-11 RES-CHIP RES-CHIP RES-CHIP RES-CHIP SHORT CHIP 22 22 22 22 0 5% 5% 5% 5% 1/16W 1/16W 1/16W 1/16W R852 R865 1-218-990-11 SHORT CHIP 1-218-990-11 SHORT CHIP 0 0 133 HCD-C770/C990 DVD Ref. No. Part No. Description Remark R866 R867 R882 1-218-990-11 SHORT CHIP 1-218-990-11 SHORT CHIP 1-218-965-11 RES-CHIP 0 0 10K 5% 1/16W R883 R884 R885 R886 R887 1-218-965-11 1-218-965-11 1-218-965-11 1-218-965-11 1-218-965-11 RES-CHIP RES-CHIP RES-CHIP RES-CHIP RES-CHIP 10K 10K 10K 10K 10K 5% 5% 5% 5% 5% 1/16W 1/16W 1/16W 1/16W 1/16W R888 R889 R899 R900 R901 1-218-965-11 1-218-965-11 1-218-957-11 1-218-941-81 1-218-941-81 RES-CHIP RES-CHIP RES-CHIP RES-CHIP RES-CHIP 10K 10K 2.2K 100 100 5% 5% 5% 5% 5% 1/16W 1/16W 1/16W 1/16W 1/16W R902 R903 R904 R905 R906 1-218-941-81 1-218-941-81 1-218-941-81 1-218-941-81 1-218-959-11 RES-CHIP RES-CHIP RES-CHIP RES-CHIP RES-CHIP 100 100 100 100 3.3K 5% 5% 5% 5% 5% 1/16W 1/16W 1/16W 1/16W 1/16W R907 R908 R909 R910 R911 1-218-959-11 1-218-965-11 1-218-965-11 1-218-941-81 1-218-941-81 RES-CHIP RES-CHIP RES-CHIP RES-CHIP RES-CHIP 3.3K 10K 10K 100 100 5% 5% 5% 5% 5% 1/16W 1/16W 1/16W 1/16W 1/16W R912 R913 R914 R915 R916 1-218-941-81 1-218-941-81 1-218-941-81 1-218-941-81 1-218-941-81 RES-CHIP RES-CHIP RES-CHIP RES-CHIP RES-CHIP 100 100 100 100 100 5% 5% 5% 5% 5% 1/16W 1/16W 1/16W 1/16W 1/16W R917 R918 R919 R920 R921 1-218-952-11 1-218-952-11 1-218-965-11 1-218-941-81 1-218-941-81 RES-CHIP RES-CHIP RES-CHIP RES-CHIP RES-CHIP 820 820 10K 100 100 5% 5% 5% 5% 5% 1/16W 1/16W 1/16W 1/16W 1/16W R922 R924 R925 R926 R927 1-218-965-11 1-218-941-81 1-218-941-81 1-218-941-81 1-218-941-81 RES-CHIP RES-CHIP RES-CHIP RES-CHIP RES-CHIP 10K 100 100 100 100 5% 5% 5% 5% 5% 1/16W 1/16W 1/16W 1/16W 1/16W R928 R929 R930 R931 R932 1-218-990-11 1-218-967-11 1-218-965-11 1-218-953-11 1-218-965-11 SHORT CHIP RES-CHIP RES-CHIP RES-CHIP RES-CHIP 0 15K 10K 1K 10K 5% 5% 5% 5% R933 R934 R935 1-218-965-11 RES-CHIP 1-218-965-11 RES-CHIP 1-218-961-11 RES-CHIP 10K 10K 4.7K 5% 5% 5% R935 1-218-965-11 RES-CHIP 10K R936 1-218-953-11 RES-CHIP 1K 1/16W 1/16W 1/16W (C990) 5% 1/16W (C770: US, CND) 5% 1/16W R937 R938 R939 R940 R941 1-218-965-11 1-218-965-11 1-218-965-11 1-218-941-81 1-218-959-11 RES-CHIP RES-CHIP RES-CHIP RES-CHIP RES-CHIP 10K 10K 10K 100 3.3K 5% 5% 5% 5% 5% 1/16W 1/16W 1/16W 1/16W 1/16W R942 R943 R944 1-218-959-11 RES-CHIP 1-218-959-11 RES-CHIP 1-218-965-11 RES-CHIP 3.3K 3.3K 10K 5% 5% 5% 1/16W 1/16W 1/16W 134 1/16W 1/16W 1/16W 1/16W Ref. No. Part No. Description Remark R945 R946 1-218-965-11 RES-CHIP 1-218-965-11 RES-CHIP 10K 10K 5% 5% 1/16W 1/16W R948 R949 R950 R951 R953 1-218-965-11 1-218-965-11 1-218-973-11 1-218-965-11 1-218-941-81 RES-CHIP RES-CHIP RES-CHIP RES-CHIP RES-CHIP 10K 10K 47K 10K 100 5% 5% 5% 5% 5% 1/16W 1/16W 1/16W 1/16W 1/16W R954 R955 R956 R957 R959 1-218-965-11 1-218-965-11 1-218-965-11 1-218-965-11 1-218-953-11 RES-CHIP RES-CHIP RES-CHIP RES-CHIP RES-CHIP 10K 10K 10K 10K 1K 5% 5% 5% 5% 5% 1/16W 1/16W 1/16W 1/16W 1/16W R960 R961 R962 R963 1-218-965-11 1-218-965-11 1-218-965-11 1-218-957-11 RES-CHIP RES-CHIP RES-CHIP RES-CHIP 10K 10K 10K 2.2K 5% 5% 5% 5% R963 1-218-961-11 RES-CHIP 4.7K 5% 1/16W 1/16W 1/16W 1/16W (US, CND) 1/16W (AUS) R964 R965 R966 R967 R968 1-218-973-11 1-218-965-11 1-218-945-11 1-218-941-81 1-218-941-81 RES-CHIP RES-CHIP RES-CHIP RES-CHIP RES-CHIP 47K 10K 220 100 100 5% 5% 5% 5% 5% 1/16W 1/16W 1/16W 1/16W 1/16W R969 1-218-947-11 RES-CHIP 330 5% R970 R971 R972 R974 1-218-965-11 1-218-965-11 1-218-965-11 1-218-990-11 RES-CHIP RES-CHIP RES-CHIP SHORT CHIP 10K 10K 10K 0 5% 5% 5% 1/16W (C990) 1/16W 1/16W 1/16W R977 R978 R979 R980 R981 1-218-969-11 1-218-953-11 1-218-973-11 1-218-973-11 1-218-961-11 RES-CHIP RES-CHIP RES-CHIP RES-CHIP RES-CHIP 22K 1K 47K 47K 4.7K 5% 1/16W 5% 1/16W 5% 1/16W 5% 1/16W 5% 1/16W (EXCEPT AUS) R981 1-218-955-11 RES-CHIP 1.5K 5% R983 R984 R985 R986 1-218-973-11 1-218-973-11 1-218-985-11 1-218-973-11 RES-CHIP RES-CHIP RES-CHIP RES-CHIP 47K 47K 470K 47K 5% 5% 5% 5% 1/16W (AUS) 1/16W 1/16W 1/16W 1/16W R987 R988 R989 R990 R991 1-218-973-11 1-218-990-11 1-218-990-11 1-218-967-11 1-218-965-11 RES-CHIP SHORT CHIP SHORT CHIP RES-CHIP RES-CHIP 47K 0 0 15K 10K 5% 1/16W 5% 5% 1/16W 1/16W R992 R993 R998 R999 1-218-965-11 1-218-953-11 1-218-965-11 1-218-955-11 RES-CHIP RES-CHIP RES-CHIP RES-CHIP 10K 1K 10K 1.5K 5% 5% 5% 5% 1/16W 1/16W 1/16W 1/16W < COMPOSITION CIRCUIT BLOCK > * RB901 * RB902 1-233-270-11 NETWORK, RES (8 GANG) 10K 1-233-270-11 NETWORK, RES (8 GANG) 10K < VIBRATOR > X301 1-781-945-21 VIBRATOR, CERAMIC (20MHz) HCD-C770/C990 DVD Ref. No. Part No. Description Remark X302 1-795-630-11 VIBRATOR, CRYSTAL (27MHz) X600 1-781-465-21 VIBRATOR, CRYSTAL (12.288MHz) X601 1-795-363-21 VIBRATOR, CERAMIC (13.5MHz) X901 1-781-945-21 VIBRATOR, CERAMIC (20MHz) ************************************************************** 1-685-886-11 FL BOARD ******** Ref. No. Part No. FL HP Description KEY Remark < COIL > L900 L901 L902 L903 1-410-387-11 1-410-387-11 1-469-144-21 1-469-144-21 INDUCTOR CHIP INDUCTOR CHIP FERRITE FERRITE 33uH 33uH 0uH 0uH < TRANSISTOR > 4-240-402-01 FL HOLDER Q900 Q901 < CAPACITOR > C808 C809 C812 C813 C814 1-162-970-11 1-126-153-11 1-124-589-11 1-164-360-11 1-162-964-11 CERAMIC CHIP ELECT ELECT CERAMIC CHIP CERAMIC CHIP 0.01uF 22uF 47uF 0.1uF 0.001uF C815 C816 C817 C818 C819 1-162-927-11 1-162-964-11 1-162-964-11 1-162-923-11 1-164-360-11 CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP 100PF 0.001uF 0.001uF 47PF 0.1uF 10% 20% 20% 10% 5% 10% 10% 5% 25V 6.3V 16V 16V 50V 50V 50V 50V 50V 16V 8-729-920-31 TRANSISTOR 8-729-920-31 TRANSISTOR DTC343TK-T-146 DTC343TK-T-146 < RESISTOR > R900 1-216-829-11 METAL CHIP 4.7K 5% 1/10W R901 1-216-807-11 METAL CHIP 68 5% 1/10W R902 1-216-807-11 METAL CHIP 68 5% 1/10W R903 1-216-829-11 METAL CHIP 4.7K 5% 1/10W ************************************************************** A-4728-876-A KEY BOARD, COMPLETE ********************* < CONNECTOR > < CONNECTOR > CN811 CN805 1-779-549-21 CONNECTOR, FFC (LIF (NON-ZIF)) 12P 1-779-547-21 CONNECTOR, FFC (LIF (NON-ZIF) 10P < LED > < FLUORESCENT INDICATOR TUBE > FL801 D801 D802 D803 D804 D805 1-518-824-11 INDICATOR TUBE, FLUORESCENT < IC > IC101 IC802 8-759-827-68 IC NJL62H400A-1 6-700-112-01 IC MSM9202-05GS-KDR1 R815 1-216-805-11 METAL CHIP 47 5% 1/10W R839 1-216-833-11 METAL CHIP 10K 5% 1/10W R840 1-216-827-11 METAL CHIP 3.3K 5% 1/10W ************************************************************** 1-685-887-11 HP BOARD ********* < CAPACITOR > 1-162-970-11 1-162-970-11 1-164-360-11 1-162-970-11 1-162-970-11 CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP 0.01uF 0.01uF 0.1uF 0.01uF 0.01uF 10% 10% 10% 10% < CONNECTOR > * CN900 1-506-987-11 PIN, CONNECTOR (PC BOARD) 5P < FERRITE BEAD > FB803 FB804 FB805 1-469-144-21 FERRITE 1-469-144-21 FERRITE 1-469-144-21 FERRITE < JACK > J900 1-566-891-21 JACK (PHONES) 0uH 0uH 0uH LED LED LED LED LED SML-020MDT-T86 (DISC1) SML-020MDT-T86 (DISC2) SML-020MDT-T86 (DISC3) SML-020MDT-T86 (DISC4) SML-020MDT-T86 (DISC5) < RESISTOR > < RESISTOR > C902 C903 C904 C991 C992 8-719-079-89 8-719-079-89 8-719-079-89 8-719-079-89 8-719-079-89 25V 25V 16V 25V 25V R816 R817 R818 R819 R820 1-216-820-11 1-216-820-11 1-216-820-11 1-216-820-11 1-216-820-11 METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP 820 820 820 820 820 5% 5% 5% 5% 5% 1/10W 1/10W 1/10W 1/10W 1/10W R821 R822 R823 R824 R825 1-216-820-11 1-216-820-11 1-216-820-11 1-216-820-11 1-216-820-11 METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP 820 820 820 820 820 5% 5% 5% 5% 5% 1/10W 1/10W 1/10W 1/10W 1/10W R826 R827 R828 R829 R830 1-216-839-11 1-216-833-11 1-216-829-11 1-216-821-11 1-216-823-11 METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP 33K 10K 4.7K 1K 1.5K 5% 5% 5% 5% 5% 1/10W 1/10W 1/10W 1/10W 1/10W R831 R832 R833 R834 R835 1-216-825-11 1-216-819-11 1-216-817-11 1-216-815-11 1-216-813-11 METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP 2.2K 680 470 330 220 5% 5% 5% 5% 5% 1/10W 1/10W 1/10W 1/10W 1/10W < SWITCH > S811 S812 S813 S814 S815 1-771-884-11 1-771-884-11 1-771-884-11 1-771-884-11 1-771-884-11 SWITCH, TACTILE (WITH LED) (DISC1) SWITCH, TACTILE (WITH LED) (A (DISC1)) SWITCH, TACTILE (WITH LED) (DISC2) SWITCH, TACTILE (WITH LED) (A (DISC2)) SWITCH, TACTILE (WITH LED) (DISC3) 135 HCD-C770/C990 KEY Ref. No. MODE MOTOR Part No. POWER Description Remark S816 1-771-884-11 SWITCH, TACTILE (WITH LED) (A (DISC3)) S817 1-771-884-11 SWITCH, TACTILE (WITH LED) (DISC4) S818 1-771-884-11 SWITCH, TACTILE (WITH LED) (A (DISC4)) S819 1-771-884-11 SWITCH, TACTILE (WITH LED) (DISC5) S820 1-771-884-11 SWITCH, TACTILE (WITH LED) (A (DISC5)) ************************************************************** MODE MOTOR BOARD ******************* Ref. No. Part No. Description C931 C932 C933 C934 1-165-723-21 1-115-339-11 1-165-723-21 1-115-339-11 ELECT CERAMIC CHIP ELECT CERAMIC CHIP 1000uF 0.1uF 1000uF 0.1uF Remark C935 C936 C937 0 C938 0 C939 1-128-950-21 1-115-339-11 1-165-176-11 1-162-964-11 1-113-907-51 ELECT CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC 1000uF 0.1uF 0.047uF 0.001uF 0.0022uF 10% 10% 10% 20% 47uF 4.7uF 0.1uF 20% 20% 10% 10% 50V 10% 50V 16V 50V 16V 50V 250V (AEP, AUS) ************************************************************** A-4729-053-A POWER BOARD, COMPLETE (C990) A-4730-639-A POWER BOARD, COMPLETE (AEP, AUS) A-4676-957-A POWER BOARD, COMPLETE (C770: US, CND) *********************** C941 C942 C946 1-564-321-00 PIN, CONNECTOR (3.96mm PITCH) 2P 1-506-996-11 PIN, CONNECTOR (PC BOARD) 14P 1-565-731-11 PLUG, CONNECTOR (2.5mm) 5P < DIODE > < CAPACITOR > 0 C901 0 C902 0 C903 0 C904 0 C905 1-126-163-11 1-104-705-11 1-104-705-11 1-162-960-11 1-162-968-11 ELECT MYLAR MYLAR CERAMIC CHIP CERAMIC CHIP 4.7uF 0.1uF 0.1uF 220PF 0.0047uF 20% 20% 20% 10% 10% 0 C909 0 C910 0 C911 0 C912 1-113-920-11 1-113-920-11 1-113-920-11 1-100-192-11 CERAMIC CERAMIC CERAMIC ELECT 0.0022uF 0.0022uF 0.0022uF 1000uF 20% 20% 20% 20% 0 C912 1-165-911-21 ELECT 390uF 50V 250V 250V 50V 50V 250V 250V 250V 200V (US, CND) 20% 450V (AEP, AUS) 0 C913 0 C914 C915 0 C916 1-136-203-11 1-126-967-11 1-115-339-11 1-117-824-11 0 C916 1-104-332-11 FILM 470PF C917 C918 0 C919 1-113-907-51 CERAMIC 1-115-339-11 CERAMIC CHIP 1-164-315-11 CERAMIC CHIP 0.0022uF 20% 0.1uF 10% 470PF 5% 0 C919 1-162-964-11 CERAMIC CHIP 0.001uF C920 1-137-699-11 FILM 2700PF C920 1-117-454-11 FILM 4700PF 5% C921 C922 C923 C924 1-115-819-11 1-162-964-11 1-115-819-11 1-126-953-11 ELECT CERAMIC CHIP ELECT ELECT 2200uF 0.001uF 2200uF 2200uF 20% 10% 20% 20% C925 C926 C927 C928 C929 1-126-947-11 1-162-927-11 1-115-339-11 1-126-953-11 1-124-584-00 ELECT CERAMIC CHIP CERAMIC CHIP ELECT ELECT 47uF 100PF 0.1uF 2200uF 100uF 20% 5% 10% 20% 20% 16V 50V 50V 35V 10V C930 1-115-339-11 CERAMIC CHIP 0.1uF 10% 50V 136 FILM ELECT CERAMIC CHIP FILM 16V 50V 50V < CONNECTOR > CN902 * CN903 CN904 1-533-313-11 HOLDER, FUSE 7-685-548-14 SCREW +BTP 3X12 TYPE2 N-S 7-685-646-79 SCREW +BVTP 3X8 TYPE2 N-S 1-126-947-11 ELECT 1-126-963-11 ELECT 1-115-339-11 CERAMIC CHIP 10000PF 47uF 0.1uF 2200PF 5% 20% 10% 3% 630V 50V 50V 1.5KV (US, CND) 10% 2KV (AEP, AUS) 250V 50V 50V (US, CND) 10% 50V (AEP, AUS) 5% 630V (US, CND) 630V (AEP, AUS) 35V 50V 35V 35V 0 D902 0 D902 D904 0 D905 0 D906 8-719-022-92 8-719-312-05 8-719-109-97 8-719-200-91 8-719-200-91 DIODE DIODE DIODE DIODE DIODE RBV-604 (US, CND) RBV-606 (AEP, AUS) MTZJ-T-77-6.8B 11EQS10-TA1 11EQS10-TA1 0 D907 0 D908 D911 D912 D913 8-719-200-91 6-500-241-01 8-719-313-14 8-719-109-93 8-719-404-50 DIODE DIODE DIODE DIODE DIODE 11EQS10-TA1 SARS03 FML-22S RD6.2ESB2 MA111-TX D914 D915 D916 D917 0 D919 8-719-312-08 8-719-200-82 8-719-312-08 8-719-200-82 8-719-084-21 DIODE DIODE DIODE DIODE DIODE FMB-G16L 11ES2 FMB-G16L 11ES2-NTA1B 10E6N-TA1B2 0 D920 D921 0 D931 0 D932 0 D933 8-719-084-21 8-719-210-21 8-719-110-53 8-719-924-13 8-719-200-91 DIODE DIODE DIODE DIODE DIODE 10E6N-TA1B2 11EQS04-TA1B MTZJ-T-77-20B MTZJ-T-77-22B 11EQS10-TA1 D990 8-719-404-50 DIODE MA111-TX < GROUND TERMINAL > EB901 EB902 1-537-770-21 TERMINAL BOARD, GROUND 1-537-770-21 TERMINAL BOARD, GROUND < IC > 0 IC901 0 IC901 IC902 IC903 IC904 6-702-338-01 6-702-385-01 6-700-388-01 8-759-474-09 8-759-332-29 IC IC IC IC IC STR-F6238 (US, CND) STR-F6267S (AEP, AUS) SE-B2 SI-8050S-LF1101 M51945BL IC905 IC906 IC908 IC909 IC909 8-759-450-47 6-700-813-01 6-701-021-01 8-759-510-71 8-759-970-89 IC IC IC IC IC BA05T SI-8033JF SI-8120JF BA10358F-E2 (US, CND) BA10358F-T1 (AEP, AUS) The components identified by mark 0 or dotted line with mark 0 are critical for safety. Replace only with part number specified. Les composants identifiés par une marque 0 sont critiques pour la sécurité. Ne les remplacer que par une pièce portant le numéro spécifié. HCD-C770/C990 POWER Ref. No. Part No. Description Remark Ref. No. Part No. POWER LED Description Remark < COIL > L901 L902 L903 L904 L905 1-424-860-11 1-456-183-11 1-456-182-11 1-414-398-11 1-414-398-11 INDUCTOR INDUCTOR INDUCTOR INDUCTOR INDUCTOR 10uH 150uH 100uH 10uH 10uH L906 L907 L908 L909 L910 1-414-398-11 1-414-398-11 1-414-398-11 1-419-253-11 1-414-398-11 INDUCTOR INDUCTOR INDUCTOR INDUCTOR INDUCTOR 10uH 10uH 10uH 100uH 10uH L911 1-414-398-11 INDUCTOR 1-456-081-11 1-456-082-11 1-456-081-11 1-456-082-11 FILTER, LINE (AEP, AUS) FILTER, LINE (US, CND) FILTER, LINE (AEP, AUS) FILTER, LINE (US, CND) < IC > 0 PC901 1-216-826-11 METAL CHIP 1-216-812-11 METAL CHIP 1-216-820-11 METAL CHIP 2.7K 180 820 5% 5% 5% 1/10W 1/10W 1/10W (AEP, AUS) 1/10W (US, CND) 1/10W R916 1-216-822-11 METAL CHIP 1.2K 5% R917 1-216-826-11 METAL CHIP 2.7K 5% R918 R919 R920 R921 R922 1-216-826-11 1-216-835-11 1-216-809-11 1-216-837-11 1-218-866-11 METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP 2.7K 15K 100 22K 6.2K 5% 5% 5% 5% 0.5% 1/10W 1/10W 1/10W 1/10W 1/10W R923 R924 R925 R926 R927 1-216-833-11 1-216-818-11 1-216-812-11 1-216-845-11 1-216-821-11 METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP 10K 560 180 100K 1K 5% 5% 5% 5% 5% 1/10W 1/10W 1/10W 1/10W 1/10W R928 R929 0 R930 1-216-833-11 METAL CHIP 1-216-797-11 METAL CHIP 1-219-237-11 SOLID 10K 10 3.3M 5% 5% 20% R931 R932 1-216-826-11 METAL CHIP 1-216-833-11 METAL CHIP 2.7K 10K 5% 5% 1/10W 1/10W 1/2W (AEP, AUS) 1/10W 1/10W 1-216-833-11 METAL CHIP 1-215-904-11 METAL OXIDE 10K 100K 5% 5% R935 R936 R937 1-216-845-11 METAL CHIP 1-216-847-11 METAL CHIP 1-216-821-11 METAL CHIP 100K 150K 1K 5% 5% 5% 1/10W 2W (AEP, AUS) 1/10W 1/10W 1/10W 10uH < LINE FILTER > 0 LF901 0 LF901 0 LF902 0 LF902 R914 R915 R916 8-749-019-04 IC TLP421 < TRANSISTOR > R933 0 R934 Q901 Q902 Q903 Q904 0 Q905 8-729-900-53 8-729-900-53 8-729-900-53 8-729-901-81 8-729-111-29 TRANSISTOR TRANSISTOR TRANSISTOR TRANSISTOR TRANSISTOR DTC114EKA-T146 DTC114EKA-T146 DTC114EKA-T146 2SC2412K-T-146-R 2SD1616A-TP-LK Q906 Q910 Q911 Q912 Q914 8-729-900-53 8-729-900-53 8-729-900-53 8-729-901-81 8-729-901-81 TRANSISTOR TRANSISTOR TRANSISTOR TRANSISTOR TRANSISTOR DTC114EKA-T146 DTC114EKA-T146 DTC114EKA-T146 2SC2412K-T-146-R 2SC2412K-T-146-R R938 R939 R940 R941 R942 1-216-065-00 1-216-049-11 1-216-077-00 1-216-833-11 1-216-049-11 METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP 4.7K 1K 15K 10K 1K 5% 5% 5% 5% 5% 1/10W 1/10W 1/10W 1/10W 1/10W Q990 Q991 Q992 8-729-026-67 TRANSISTOR 8-729-901-81 TRANSISTOR 8-729-901-81 TRANSISTOR 2SB1640 (TP) 2SC2412K-T-146-R 2SC2412K-T-146-R R943 1-216-824-11 METAL CHIP 1.8K 5% 1/10W < TRANSFORMER > 0 T901 0 T901 < RESISTOR > 0 R900 1-219-237-11 SOLID 3.3M 20% 0 R901 0 R902 1-216-813-11 METAL CHIP 1-245-392-51 METAL OXIDE 220 0.15 5% 5% 0 R903 0 R904 1-245-392-51 METAL OXIDE 1-216-341-11 METAL OXIDE 0.15 0.22 5% 5% 0 R905 1-215-926-00 METAL OXIDE 33K 5% 0 R905 1-215-928-11 METAL OXIDE 68K 5% R906 0 R907 0 R908 1-216-833-11 METAL CHIP 1-216-829-11 METAL CHIP 1-215-928-11 METAL OXIDE 10K 4.7K 68K 5% 5% 5% 0 R909 R910 0 R911 0 R912 0 R913 1-215-902-11 1-216-829-11 1-216-828-11 1-216-823-11 1-249-385-11 METAL OXIDE METAL CHIP METAL CHIP METAL CHIP CARBON The components identified by mark 0 or dotted line with mark 0 are critical for safety. Replace only with part number specified. 47K 4.7K 3.9K 1.5K 2.2 5% 5% 5% 5% 5% 1/2W (US, CND) 1/10W 1W (US, CND) 1W 1W 3W (US, CND) 3W (AEP, AUS) 1/10W 1/10W 3W (AEP, AUS) 1-437-865-11 TRANSFORMER, POWER (US, CND) 1-437-866-11 TRANSFORMER, POWER (AEP, AUS) < THERMISTOR > 0 TH901 1-803-916-11 THERMISTOR, NTC ************************************************************** POWER LED BOARD ***************** < LED > D812 8-719-074-42 LED SLR325VR-T31 (STANDBY) < RESISTOR > R804 1-216-817-11 METAL CHIP 470 5% 1/10W ************************************************************** 2W 1/10W 1/10W 1/10W 1/6W Les composants identifiés par une marque 0 sont critiques pour la sécurité. Ne les remplacer que par une pièce portant le numéro spécifié. 137 HCD-C770/C990 POWER S/W Ref. No. Part No. RELAY RF Description Remark Ref. No. Part No. < CAPACITOR > 0 C900 1-165-528-11 MYLAR 0.1uF Description Remark < RESISTOR > POWER S/W BOARD ***************** 10 275V R701 R702 R711 R712 R721 1-249-415-11 1-247-807-31 1-249-415-11 1-247-807-31 1-249-415-11 CARBON CARBON CARBON CARBON CARBON 680 100 680 100 680 5% 5% 5% 5% 5% 1/4W 1/4W 1/4W 1/4W 1/4W < CONNECTOR > * CN900 * CN901 1-568-226-11 PIN, CONNECTOR (3.96mm PITCH) 2P 1-568-226-11 PIN, CONNECTOR (3.96mm PITCH) 2P < SWITCH > R722 1-247-807-31 CARBON 100 5% 1/4W R731 1-249-407-11 CARBON 150 5% 1/4W R732 1-249-417-11 CARBON 1K 5% 1/4W R733 1-249-429-11 CARBON 10K 5% 1/4W R734 1-249-431-11 CARBON 15K 5% 1/4W ************************************************************** 0 S901 1-786-377-11 SWITCH, POWER (POWER) ************************************************************** A-4728-690-A RF BOARD, COMPLETE ******************* A-4728-700-A RELAY BOARD, COMPLETE ********************** < CAPACITOR > < CAPACITOR > C711 C751 C752 C753 C754 1-126-795-11 1-164-159-21 1-164-159-21 1-164-159-21 1-164-159-21 ELECT CERAMIC CERAMIC CERAMIC CERAMIC 10uF 0.1uF 0.1uF 0.1uF 0.1uF 20% C755 C756 C758 C761 C762 1-164-159-21 1-164-159-21 1-164-159-21 1-162-306-11 1-164-159-21 CERAMIC CERAMIC CERAMIC CERAMIC CERAMIC 0.1uF 0.1uF 0.1uF 0.01uF 0.1uF C763 C764 C765 C766 C767 1-164-159-21 1-164-159-21 1-164-159-21 1-164-159-21 1-164-159-21 CERAMIC CERAMIC CERAMIC CERAMIC CERAMIC 0.1uF 0.1uF 0.1uF 0.1uF 0.1uF 50V 50V 50V 50V 50V C768 C769 C771 C781 1-164-159-21 1-164-159-21 1-162-306-11 1-162-306-11 CERAMIC CERAMIC CERAMIC CERAMIC 0.1uF 0.1uF 0.01uF 0.01uF 50V 50V 16V 16V 30% 30% 30% 50V 50V 50V 50V 50V 50V 50V 50V 16V 50V < CONNECTOR > CN701 CN702 CN703 CN704 CN710 1-779-565-21 1-785-329-11 1-785-328-11 1-785-328-21 1-568-945-11 CONNECTOR, FFC (LIF (NON-ZIF)) 28P PIN, CONNECTOR (LIGHT ANGLE) 3P PIN, CONNECTOR (LIGHT ANGRE) 2P PIN, CONNECTOR (LIGHT ANGRE) 2P PIN, CONNECTOR 7P < DIODE > D701 D711 D721 8-719-921-40 DIODE MTZJ-T-77-4.7B 8-719-921-42 DIODE MTZJ-T-77-5.1A 8-719-982-03 DIODE MTZJ-T-77-3.6A < IC > IC701 IC711 IC721 8-759-598-69 IC BA6956AN 8-759-598-69 IC BA6956AN 8-759-598-69 IC BA6956AN < TRANSISTOR > Q731 138 8-729-029-66 TRANSISTOR C001 C002 C003 C004 C005 1-126-206-11 1-124-779-00 1-126-206-11 1-124-779-00 1-128-993-21 ELECT CHIP ELECT CHIP ELECT CHIP ELECT CHIP ELECT CHIP 100uF 10uF 100uF 10uF 22uF 20% 20% 20% 20% 20% 6.3V 16V 6.3V 16V 10V C006 C008 C009 C010 C011 1-128-993-21 1-107-826-11 1-107-826-11 1-115-416-11 1-115-416-11 ELECT CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP 22uF 0.1uF 0.1uF 0.001uF 0.001uF 20% 10% 10% 5% 5% 10V 16V 16V 25V 25V C012 C013 C014 C015 C016 1-107-826-11 1-107-826-11 1-162-966-11 1-162-966-11 1-162-966-11 CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP 0.1uF 0.1uF 0.0022uF 0.0022uF 0.0022uF 10% 10% 10% 10% 10% 16V 16V 50V 50V 50V C017 C018 C019 C020 C021 1-162-966-11 1-164-172-11 1-164-172-11 1-162-919-11 1-162-919-11 CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP 0.0022uF 0.0056uF 0.0056uF 22PF 22PF 10% 10% 10% 5% 5% 50V 25V 25V 50V 50V C022 C023 C024 C025 C026 1-162-919-11 1-162-919-11 1-162-970-11 1-107-826-11 1-107-826-11 CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP 22PF 22PF 0.01uF 0.1uF 0.1uF 5% 5% 10% 10% 10% 50V 50V 25V 16V 16V C027 C028 C029 C030 C031 1-107-826-11 1-107-826-11 1-162-970-11 1-162-970-11 1-115-416-11 CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP 0.1uF 0.1uF 0.01uF 0.01uF 0.001uF 10% 10% 10% 10% 5% 16V 16V 25V 25V 25V C032 C033 C034 C035 C036 1-165-176-11 1-107-826-11 1-107-826-11 1-107-826-11 1-125-891-11 CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP 0.047uF 0.1uF 0.1uF 0.1uF 0.47uF 10% 10% 10% 10% 10% 16V 16V 16V 16V 10V C037 C038 C039 C040 C041 1-162-959-11 1-164-677-11 1-164-677-11 1-107-826-11 1-107-826-11 CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP 330PF 0.033uF 0.033uF 0.1uF 0.1uF 5% 10% 10% 10% 10% 50V 16V 16V 16V 16V C042 1-164-218-11 CERAMIC CHIP 180PF 0.25PF 50V RT1N141S-TP The components identified by mark 0 or dotted line with mark 0 are critical for safety. Replace only with part number specified. Les composants identifiés par une marque 0 sont critiques pour la sécurité. Ne les remplacer que par une pièce portant le numéro spécifié. RF ROLLER MOTOR SEL STOCKER MOTOR Ref. No. C049 Part No. Description 1-107-826-11 CERAMIC CHIP Remark 0.1uF 10% SW (1) Ref. No. Part No. SW (2) HCD-C770/C990 SW (3) Description SW (4) Remark 16V ROLLER MOTOR BOARD ******************** < CONNECTOR > CN001 CN002 CN003 SENSOR 1-815-031-11 CONNECTOR, FFC/FPC (ZIF) 24P 1-784-836-21 CONNECTOR, FFC (LIF (NON-ZIF)) 29P 1-784-861-21 CONNECTOR, FFC (LIF (NON-ZIF)) 9P ************************************************************** SEL BOARD ********** < DIODE > D001 D002 S826 1-771-692-11 SWITCH, SLIDE (SCAN SELECT) ************************************************************** 8-719-988-61 DIODE 1SS355TE-17 8-719-988-61 DIODE 1SS355TE-17 1-685-004-11 SENSOR BOARD ************** < IC > IC001 < PHOTO SENSOR > 8-752-417-53 IC CXD1881AR IC751 8-749-017-45 SENSOR, PHOTO RPR-220C1N (DISC INSERT DETECT SENSOR) ************************************************************** < COIL > L001 L002 1-412-031-11 INDUCTOR CHIP 47uH 1-412-031-11 INDUCTOR CHIP 47uH 1-685-006-11 STOCKER MOTOR BOARD ********************* < TRANSISTOR > Q001 Q002 8-729-903-46 TRANSISTOR 8-729-903-46 TRANSISTOR 2SB1132-T100-QR 2SB1132-T100-QR ************************************************************** 1-685-008-11 SW (1) BOARD ************ < RESISTOR > R001 R003 R004 R005 R006 1-218-668-11 1-216-803-11 1-216-803-11 1-216-841-11 1-216-817-11 METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP 100 33 33 47K 470 0.5% 5% 5% 5% 5% 1/16W 1/10W 1/10W 1/10W 1/10W R007 R008 R009 R010 R011 1-216-803-11 1-216-803-11 1-216-841-11 1-216-817-11 1-216-864-11 METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP 33 33 47K 470 0 5% 5% 5% 5% 5% 1/10W 1/10W 1/10W 1/10W 1/10W R012 R013 R014 R015 R016 1-216-864-11 1-216-864-11 1-216-864-11 1-216-864-11 1-216-864-11 METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP 0 0 0 0 0 5% 5% 5% 5% 5% 1/10W 1/10W 1/10W 1/10W 1/10W R017 R018 R019 R020 R021 1-216-864-11 1-216-864-11 1-216-864-11 1-216-864-11 1-216-864-11 METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP 0 0 0 0 0 5% 5% 5% 5% 5% 1/10W 1/10W 1/10W 1/10W 1/10W R022 R023 R024 R025 R026 1-216-813-11 1-216-820-11 1-216-864-11 1-216-809-11 1-218-718-11 METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP 220 820 0 100 12K 5% 5% 5% 5% 0.5% 1/10W 1/10W 1/10W 1/10W 1/16W R027 R028 R029 R032 R033 1-216-864-11 1-216-864-11 1-216-864-11 1-216-809-11 1-216-864-11 METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP 0 0 0 100 0 5% 5% 5% 5% 5% 1/10W 1/10W 1/10W 1/10W 1/10W < SWITCH > S711 1-786-382-11 SWITCH, PUSH (1 KEY) (DISC INSERT (8/12cm)) ************************************************************** 1-685-009-11 SW (2) BOARD ************ < SWITCH > S713 1-786-382-11 SWITCH, PUSH (1 KEY) (DISC IN (8/12cm)) S714 1-786-382-11 SWITCH, PUSH (1 KEY) (DISC IN (8cm)) ************************************************************** 1-685-010-11 SW (3) BOARD ************ < SWITCH > S715 1-786-382-11 SWITCH, PUSH (1 KEY) (DISC OUT) ************************************************************** 1-685-011-11 SW (4) BOARD ************ < SWITCH > S716 1-786-382-11 SWITCH, PUSH (1 KEY) (STOCKER IN/OUT) S717 1-786-382-11 SWITCH, PUSH (1 KEY) (DISC POSITION) S718 1-786-382-11 SWITCH, PUSH (1 KEY) (STOCKING) ************************************************************** R034 1-219-570-11 RES-CHIP 10M 5% 1/10W R035 1-216-864-11 METAL CHIP 0 5% 1/10W R041 1-216-821-11 METAL CHIP 1K 5% 1/10W ************************************************************** 139 HCD-C770/C990 VIDEO Ref. No. VOL Part No. Description Remark A-4728-874-A VIDEO BOARD, COMPLETE ********************** Ref. No. IC208 IC209 Part No. < CAPACITOR > Remark < TERMINAL BOARD > C202 C218 C248 C252 C265 1-126-369-11 1-124-589-11 1-126-153-11 1-164-156-11 1-126-157-11 ELECT ELECT ELECT CERAMIC CHIP ELECT 220uF 47uF 22uF 0.1uF 10uF 20% 20% 20% C267 C272 C274 C275 C276 1-124-584-00 1-164-156-11 1-126-157-11 1-164-156-11 1-126-157-11 ELECT CERAMIC CHIP ELECT CERAMIC CHIP ELECT 100uF 0.1uF 10uF 0.1uF 10uF 20% C277 C278 C279 C280 C281 1-126-153-11 1-126-157-11 1-162-974-11 1-126-160-11 1-164-156-11 ELECT ELECT CERAMIC CHIP ELECT CERAMIC CHIP 22uF 10uF 0.01uF 1uF 0.1uF 20% 20% C282 C283 C284 C285 C286 1-164-156-11 1-126-160-11 1-124-584-00 1-164-156-11 1-164-156-11 CERAMIC CHIP ELECT ELECT CERAMIC CHIP CERAMIC CHIP 0.1uF 1uF 100uF 0.1uF 0.1uF C287 C288 C289 C290 C291 1-164-156-11 1-164-156-11 1-126-157-11 1-164-156-11 1-126-157-11 CERAMIC CHIP CERAMIC CHIP ELECT CERAMIC CHIP ELECT 0.1uF 0.1uF 10uF 0.1uF 10uF C292 C293 C294 C295 C296 1-126-369-11 1-124-584-11 1-164-156-11 1-124-584-00 1-126-518-11 ELECT ELECT CERAMIC CHIP ELECT ELECT 220uF 100uF 0.1uF 100uF 470uF 20% 20% 6.3V 10V 25V 10V 4V C297 C298 C299 C300 C301 1-126-369-11 1-124-584-11 1-126-153-11 1-124-584-00 1-126-153-11 ELECT ELECT ELECT ELECT ELECT 220uF 100uF 22uF 100uF 22uF 20% 20% 20% 20% 20% 6.3V 10V 6.3V 10V 6.3V C302 1-124-584-00 ELECT 100uF 20% 10V 20% 20% 20% 20% 20% 20% 20% 20% 20% 20% 6.3V 16V 6.3V 25V 16V 10V 25V 16V 25V 16V 6.3V 16V 50V 50V 25V 25V 50V 10V 25V 25V 25V 25V 16V 25V 16V < CONNECTOR > CN203 CN207 Description 6-702-335-01 IC MM1568 8-759-284-49 IC NJM2285V-TE2 J202 1-694-920-11 TERMINAL BOARD (MONITOR OUT) < COIL > L202 L207 L209 1-469-525-11 INDUCTOR 1-469-525-11 INDUCTOR 1-469-525-11 INDUCTOR 10uH 10uH 10uH < TRANSISTOR > Q210 Q214 8-729-027-23 TRANSISTOR 1-801-806-11 TRANSISTOR DTA114EKA-T146 DTC144EKA-T146 < RESISTOR > R256 R259 R265 R266 R267 1-216-833-11 1-218-285-11 1-216-833-11 1-216-833-11 1-218-285-11 METAL CHIP RES-CHIP METAL CHIP METAL CHIP RES-CHIP 10K 75 10K 10K 75 5% 5% 5% 5% 5% 1/10W 1/10W 1/10W 1/10W 1/10W R268 R269 R270 R273 R278 1-218-285-11 1-218-285-11 1-218-285-11 1-218-285-11 1-216-833-11 RES-CHIP RES-CHIP RES-CHIP RES-CHIP METAL CHIP 75 75 75 75 10K 5% 5% 5% 5% 5% 1/10W 1/10W 1/10W 1/10W 1/10W R286 1-216-833-11 METAL CHIP 10K 5% 1/10W ************************************************************** 1-685-887-11 VOL BOARD ********** < CAPACITOR > C800 C801 1-162-970-11 CERAMIC CHIP 1-162-970-11 CERAMIC CHIP 0.01uF 0.01uF 10% 10% 25V 25V < CONNECTOR > * CN820 1-568-941-11 PIN, CONNECTOR 3P < SWITCH > S800 1-418-632-11 ENCODER, ROTARY (VOLUME) ************************************************************** 1-779-551-21 CONNECTOR, FFC (LIF (NON-ZIF)) 14P 1-779-548-21 CONNECTOR, FFC (LIF (NON-ZIF)) 11P MISCELLANEOUS ************** < FERRITE BEAD > FB201 FB202 FB203 FB204 FB205 1-469-324-21 1-469-324-21 1-469-324-21 1-469-324-21 1-469-324-21 FERRITE FERRITE FERRITE FERRITE FERRITE 0uH 0uH 0uH 0uH 0uH FB206 1-469-324-21 FERRITE 0uH < IC > IC204 IC206 IC207 140 6-600-013-01 IC TORX179L (OPTICAL DIGITAL IN VIDEO2) 6-702-334-01 IC MM1510 8-759-696-10 IC NJM2235V (TE2) 104 110 201 202 204 1-824-479-11 1-824-478-11 1-824-626-11 1-824-483-11 1-824-478-11 FLEXIBLE FLAT CABLE (10 CORE) FLEXIBLE FLAT CABLE (12 CORE) FLEXIBLE FLAT CABLE (19 CORE) FLEXIBLE FLAT CABLE (28 CORE) FLEXIBLE FLAT CABLE (12 CORE) 205 206 207 208 209 1-824-625-11 1-500-657-11 1-824-480-11 1-824-481-11 1-824-482-11 FLEXIBLE FLAT CABLE (17 CORE) CORE, FERRITE FLEXIBLE FLAT CABLE (29 CORE) FLEXIBLE FLAT CABLE (14 CORE) FLEXIBLE FLAT CABLE (29 CORE) 212 252 1-469-854-11 CORE FERRITE 1-824-485-11 FLEXIBLE FLAT CABLE (11 CORE) The components identified by mark 0 or dotted line with mark 0 are critical for safety. Replace only with part number specified. Les composants identifiés par une marque 0 sont critiques pour la sécurité. Ne les remplacer que par une pièce portant le numéro spécifié. HCD-C770/C990 Ref. No. Part No. 0 253 0 253 0 253 1-783-531-72 CORD, POWER (US, CND) 1-696-169-12 CORD, POWER (AEP) 1-696-848-42 CORD, POWER (AUS) 257 258 258 0 603 605 0 F901 Description Remark Part No. Description Remark 1-824-623-11 FLEXIBLE FLAT CABLE (11 CORE) A-4730-139-A TUNER BOARD, COMPLETE (DTP-001) (AEP, AUS) A-4730-141-A TUNER BOARD, COMPLETE (DTP-001) (US, CND) 1-477-263-11 PICKUP UNIT (TDP022W) 1-685-250-11 FLEXIBLE BOARD FL801 M301 M761 1-533-453-11 FUSE, GLASS TUBE (DIA. 5) (5A/125V) (US, CND) 1-533-470-11 FUSE, GLASS TUBE (DIA. 5) (15A/250V) (AEP, AUS) 1-518-824-11 INDICATOR TUBE, FLUORESCENT 1-763-861-11 FAN, DC A-4735-953-A MOTOR (STOCKER) ASSY (MODE) M771 M781 S702 S771 A-4735-953-A A-4735-953-A 1-477-299-11 1-477-300-11 0 F901 Ref. No. MOTOR (STOCKER) ASSY (ROLLER) MOTOR (STOCKER) ASSY (STOCKER) ENCODER, ROTARY (STOCKER POSITION) ENCODER, ROTARY (MODE) The components identified by mark 0 or dotted line with mark 0 are critical for safety. Replace only with part number specified. Les composants identifiés par une marque 0 sont critiques pour la sécurité. Ne les remplacer que par une pièce portant le numéro spécifié. 141 HCD-C770/C990 REVISION HISTORY Clicking the version allows you to jump to the revised page. Also, clicking the version at the upper right on the revised page allows you to jump to the next revised page. Ver. 1.0 1.1 Date 2002.07 2002.10 1.2 2002.12 1.3 2003.01 1.4 2003.03 1.5 2003.07 Description of Revision New Addition of “RELEASING THE DISC SLOT LOCK” to the SERVICING NOTES (SPM-02096) Correction of Part No. for EXTENSION CABLE (DVD board – AMP board) (SPM-02112) Addition of “CHECKING OF OPERATIONS WITH REMOTE COMMANDERS OF DIFFERENT MODELS” to the SERVICING NOTES (SPM-02118) Addition of “TEST DISC LIST” to the TEST MODE Addition of “AUTO SERVO ADJUSTMENT” to the ELECTRICAL ADJUSTMENT (SPM-03008) Correction of ASSEMBLY Addition of “PHASE ADJUSTMENT BETWEEN PINIONS (SLIDER) AND SLIDER-1 TO 5 (L/R)” to the ASSEMBLY (SPM-03063)
Similar documents
SERVICE MANUAL
SONY PARTS WHOSE PART NUMBERS APPEAR AS SHOWN IN THIS MANUAL OR IN SUPPLEMENTS PUBLISHED BY SONY.
More informationPages 51-100 Catalog Volume 16
Plastic 12 ”x12 ” Plastic 12 ”x12 ” $18.00 dz 12 dz Assorted $16.50 dz Min. 6 pcs per style
More informationSERVICE MANUAL
V, so analog meters must have an accurate low-voltage scale. The Simpson 250 and Sanwa SH-63Trd are examples of a passive VOM that is suitable. Nearly all battery operated digital multimeters that ...
More informationservice manual - Pagesperso
on the disc reflective surface by the objective lens in the optical pick-up block. Therefore, when checking the laser diode emission, observe from more than 30 cm away from the objective lens. CLEA...
More information