mizutaniscissors.com 1

Transcription

mi z ut an isc isso r s. co m
mi zut anisc issor s. com
1
2
mi zu t anisc isso r s. co m
100% Handcrafted
Mizutani Scissors have been one of the
most popular hair styling scissors among
the top professional hair stylists throughout
the world for their impeccable quality and
superb usability.
All Mizutani Scissors are 100% handcrafted
by a team of highly skilled craftsman at the
factory in Chiba, Japan. From cutting steel to
polishing for the finish, each shear receives
the closest attention throughout the 30 step
process to ensure the highest quality.
History
The tradition of the Mizutani began in 1921
in Asakusa, Tokyo where the first Mizutani
decided to produce the best quality hair
styling scissors. His passion was to make
scissors that are razor-sharp and durable
yet easy-to-handle at the same time. Over
the years we have continued to focus on
improving our craftsmanship to produce the
highest quality scissors in the industry.
Our very first worker was a Samurai Sword
maker.
Mizutani founders
Motokazu Mizutani
mizutaniscissors.com
MizutaniScissorsUSA
MizutaniScissors
Mizutani USA / Motik Inc.
Phone: 415-361-1114
[email protected]
Mizutani USA / Motik, Inc. is the exclusive authorized distributor/reseller of Mizutani scissors in North America.
©2015 Mizutani USA / Motik, Inc. and Mizutani Scissors MFG Co. LTD.
1
2
SWORD D-17
The focus of designing the “Sword” series was
to take into consideration the importance of
ergonomics by redefining the three-dimensional
handle. A built in ball bearing made from carbon
resin provides the smoothest feeling in a scissor
that has ever been achieved.
The Hamaguri edge, ergonomic design and ball
bearing pivot gives you a sense of complete
control for slide, dry and wet cutting.
$800 5.7/6.2/6.7
SWORD Series – It’s all about your hand.
• Ergonomic design to prevent wrist/carpal tunnel
issues.
• Carbon resin bearing and titanium-plated wave
washer to reduce strain on your hand.
SWORD D-19
The Sword D-19 was made with a new Kengata
edge (arched-like shape which makes the whole
blade more powerful). The focus of designing
the “Sword” series was to take into consideration
the importance of ergonomics and redefining
the three-dimensional handle. A built in ball
bearing pivot made from carbon resin provides
the smoothest feeling in a scissor that has ever
been achieved.
The ergonomic design and ball bearing give you
a sense of stability for slide, dry and wet cutting.
SWORD Engraved Model
$850 5.7/6.2/6.7
Only 50 in the world. Engraved
by the famous Japanese
sculptor, Shigetoshi Tekeuchi
$4,000 5.7/6.2
SWORD DB-20
This scissor is the next
generation of steel that is
made from Nano Powder Metal.
A highly precision bearing system
provides unparalleled accuracy in
cutting. A true all around scissor.
$800 5.7/6.2/6.7/7.2
Ichi-nino-san
ICHI-NINO-SAN #1
An excellent scissor for precision hair cutting.
Good for point cutting, slide cutting and some
dry cutting. Cat’s eye blade give your versatility
for all around cutting.
FOUR does it all
• Flat screw that can be adjusted from the back.
• Removable finger rest/tang.
• Number can be removed per request.
$450 5.0/5.5/6.0
ICHI-NINO-SAN Four Scissors Set
A dream set of the four most popular
Mizutani Scissors for all your styling needs.
It’s a $600 savings! Don’t miss this super deal.
ICHI-NINO-SAN #2
Designed with thick blades that allow for easy slide
and dry cutting. Combining Ichi #2 with Ichi #1
covers all modern cutting techniques.
$1,200
$450 5.5/6.0
ICHI-NINO-SAN #3
ICHI-NINO-SAN #4
A texturizer with a 25% cutting ratio that can
be angled from 15 – 90 degrees. Stylist will
be able to create a full range of texture to the
haircut.
A thinning/blending tool that has a 15%
cutting ratio. Stytlist can use it after scissor
over comb for better blending. Combining
Ichi #3 and Ichi #4 creates any texture desired
to the hair.
• Cutting Ratio: 25%
$450
• Cutting Ratio: 15%
Blade/Teeth position: Regular
$450
3
4
SWORD
+ wood
SWORD +
African Black Wood D-17
We at Mizutani explore all
posibilities. The Sword +Wood is
made by a single skilled craftsman.
The feeling of fingers on wood
while cutting is a unique
experience that you shouldn’t
miss. We use quince wood for its
gorgeous patterns and smooth feel.
African Black Wood is the
darkest wood.
Classic “Hamaguri” edge
finish.
$1,200 5.7/6.2
*D-19 (Kengata Edge) can be
available per request.
• Ergonomic design
• Semi-flat screw
• High performance carbon resin bearing
SWORD + Wood D-19
Lightweight “Kengata” edge finish.
$1,200 5.7/6.2
SWORD + Wood D-17
Classic “Hamaguri” edge finish.
$1,200 5.7/6.2
SWORD
+ carbon
Using carbon fiber material,
we have created a handle that
is both strong and gentle to
your hand. The Sword + Carbon
is constructed of 20 seperate
parts (most shears use 6) and
is produced by a single master
craftsman.
• Ergonomic design
• Semi-flat screw
• High performance carbon resin bearing
SWORD + Olive Wood D-17
$1,200 5.7/6.2
*D-19 (Kengata Edge) can be
available per request.
SWORD + Carbon D-19
SWORD + Carbon D-17
Lightweight “Kengata” edge finish.
$1,200 5.7/6.2
$1,200 5.7/6.2
Free your thumb
The moment your hand grips a Mizutani Swivel Thumb shear
you will know it is in a class above all others. The unmatched
quality of the bearing system and the truly ergonomic design
of the swivel make these scissors superior to any other swivel
available.
SWORD Swivel S-01
SWORD Swivel S-02
finish.
Lightweight “Kengata”
edge finish.
$1,000 5.7/6.2*
$1,000 5.7/6.2*
SWORD Swivel
Speedstar S-01
SWORD Swivel
Speedstar S-02
finish.
Lightweight “Kengata”
edge finish.
$1,000 5.7/6.2*
$1,000 5.7/6.2*
Single Swivel
The ideally placed thumb ring is amazingly
smooth and can be entered from either
side. Choice of three ring sizes assures
perfect without/with minimal need for
additional ring sizes.
If you are a swivel user, or are experiencing
hand problems, you must try this.
Double Swivel
Absolutely unique “one arm” double swivel
rotates through entire range of motion
of all stylists. Unimagineably smooth, this
shear may be copied by others but never
duplicated.
If you are a swivel user, or are experiencing
hand problems, you must try this.
*Can be made with a 6.7 blade
5
6
S WOR D DA MA®
Quality and Beauty
The fame of damascus blade steel goes back to the Persian
Empire. This fabled process produced blades that were
tough, resilient and sharp, with beautiful layering patterns
suggestive of a flowing stream.
Mizutani has restored this lost art using modern, patented
CMC micro powder steel to create one-of-a-kind shears
that are both exceptional tools and beguiling pieces of art.
The microstructure of DAMA
Carbides and layered microstructure of DAMA
DAMA INTEGRAL
Both the D-01 AND the D-02 are produced with a single
bar of 100% damascus steel so the unique flowing
pattern continues through the entire blade and handle.
DAMA INTEGRAL D-01
DAMA INTEGRAL D-02
The blade is fashioned with the
“Micro-Bevel Edge” for more
durability.
The blade is the “Kangata Edge”
with a center ridge providing
durability and excellent power
and precision for more demanding
types of hair.
$2,500 5.7/6.2
$2,500 5.7/6.2
Both the D-05 AND the D-07 are made with damascus
CMC micro powder steel and the handle is made with
Mizutani high quality stainless to produce a more
attainable shear.
DAMA D-05
DAMA D-07
The blade is fashioned with the
“Micro-Bevel Edge” for more
durability.
The blade is the “Kangata Edge”
with a center ridge providing
durability and excellent power
and precision for more demanding
types of hair.
$1,200 5.7/6.2
$1,200 5.7/6.2
7
8
This is the ORIGINAL knife blade design which has been imitated
many times. The Acro Knife draws on centuries of Japanese blade
technology to create a unique design.
The tenacious blades excel in slide, wet and dry cutting and handle
is designed with the unique Mizutani “spoon shape” for ergonomic
hold and feel. The Acro Knife Slim is available in mat or semi-gloss
finish.
ACRO KNIFE Mat
$900 5.8/6.3
ACRO KNIFE Semi Mirror
$900 5.8/6.3
Slimmer than the original Acro Knife and light weighted. If you
like the Knife series, but appreciate a light feel, these scissors
are for you. The slim version is as powerful as the original Knife,
as the Acro Knife Slim also draws on centuries of Japanese
blade technology. The tenacious blades excel in slide, wet and
dry cutting and handle is designed with the unique Mizutani
“spoon shape” for ergonomic hold and feel. The Acro Knife Slim is
available in mat or semi-gloss finish.
ACRO KNIFE Slim Mat
$900 5.8/6.3
ACRO KNIFE Slim Semi Mirror
$900 5.8/6.3
9
10
Acroleaf
®
WIDE
Experience the dry and wet slide cutting of
the leaf-shaped blades.
Acroleaf WIDE
The Acroleaf Wide is the ultimate tool
for dry and slide cutting. The lower
blade of the scissor is designed with
a complex curvature that maintains
a precise angle at all points on the
blades for ideal slide cutting.
$600 5.0/5.5/6.0
LEFTY $650 5.0/5.5/6.0
Heavy (6.0)
Medium (5.5)
Light (5.0)
Acroleaf WIDE K
$600 5.0/5.5/6.0
LEFTY $650 5.0/5.5/6.0
Acroleaf WIDE M-15
Acroleaf WIDE M-25
Acroleaf WIDE M-50
Cutting Ratio: 5-15%
$600
$600
$600
Blade/Teeth position*:
Regular (shown)
“Reverse blade available at no
extra charge”
Regular (shown)
“Reverse blade available at
no extra charge”
Regular (shown)
no extra charge”
The Acroleaf WIDE thinner offers both volume and texture control
in one scissor. A perfect thinning scissor for bob style and popular
layered wave styles. By changing the scissor cutting angle, you can
control the cutting percentage. If you cut vertically to the section
the cut percentage is less and cutting horizontality to the section
reduces the volume of hair removed.
*Regular teeth is ideal when flipping or cutting outer layers of the sections.
Reverse teeth is for texturing inner part of hair for tapering.
Acroleaf WIDE K-15
Acroleaf WIDE K-25
Acroleaf WIDE K-50
$600
$600
$600
Regular (shown)
no extra charge”
Regular (shown)
no extra charge”
Reverse (shown)
“Regular blade available at
no extra charge”
11
12
ACRO Type-K
ACRO Type-K
ACRO Type-K – Titanium Black
The Acro Type K model is an all around
scissor that excels in precision work.
A newer “edgy” design uses a flat
screw that you can adjust from the
back. The ergonomic handle not only
provides a perfect fit, but eases stress
to your fingers from every angle of use.
Removable finger rest is optional.
Mat black titanium finish. Ideal
for those allergic to metal. Highly
resistant to corrosion and surface
scratching.
$700 5.0/5.5/6.0/6.5/7.0
$650 5.0/5.5/6.0/6.5/7.0
LEFTY $700 5.0/5.5/6.0/6.5/7.0
ACRO Type-Z
The latest high-tech development in scissor
production uses Nano powder (extremely
small particles) and powder metallurgy to
produce scissors of unprecedented strength
and sharpness.
Combined with the superior Acro
ergonomic design and the ACRO Type-Z
could be the best scissor you will ever own.
ACRO Type-Z1
ACRO Type-Z Dual 3
The Acro Type-Z1 is produced
with the sharpest cutting angle
in the Mizutani line, resulting
in perfectly straight lines and
absolute precision in detail
cutting. For stylists who strive
for perfection.
Even handle
$800 5.5/6.0/6.5/7.0
LEFTY $850 5.5/6.0/6.5/7.0
ACRO Type-Z Dual 4
Offset handle
ACRO Type-Z2
The Acro Type-Z2 is crafted with
the traditional convex blade
designed to increase cutting power
while providing extended blade
durability.
$800 5.5/6.0/6.5/7.0
LEFTY $850 5.5/6.0/6.5/7.0
ACRO Type-Z Dual
Second generation Dual Blades with Nano Powder Metal.
Having teeth on both blades will give you inner and outer
texture, more movement and more vibrant look. Nano
Powder Metal provides a sharp and clean cut to the hair ends.
Easy to pull out.
• 23 teeth
• Cutting Ratio 10-15%
$700
LEFTY $750
ACRO®
A gentle thinning that will not stress, or damage the hair.
• “Step-blade” creates soft bite and smooth withdrawal, leaves minimal hair lines.
• A natural settling feel as if the cut was done several weeks ago.
ACRO YURAGI 00
ACRO YURAGI 04
The Acro Yuragi 00 very gently
removes only 10% of the hair with
each cut allowing for a precise
shaping and the perfect sculpted look.
The Acro Yuragi 04 removes slightly
more hair at 15% but still creates a
delicate finish leaving fine blending
for a sensitive texture.
• 21 teeth
• Cutting Ratio 10%
• 21 teeth
$600
$600
ACRO YURAGI 06
ACRO YURAGI 10
The Acro Yuragi 06 gives a moderately
aggressive blending without leaving
blocky end notches and excels at
creating depth while removing bulk.
The Acro Yuragi 10 works as an
aggressive blender, removing up to
40% of the hair.
• 19 teeth
$600
• 16 teeth
$600
13
14
BLACK-SMITH Matelite-Q
Quicksilver
Designed as the ultimate in hand
comfort the Matelite-Q Quicksilver
could be the most comfortable
scissors your hand has ever touched.
All edges are curved and years of
research design have produced
an ergonomic, soft feel that fights
calluses and carpal tunnel. An all
around scissors for precision, dry,
slide and point cutting.
$500 5.5/6.0
$720 6.5/7.0
LEFTY $550 5.5/6.0
LEFTY $770 5.5/6.0
BLACK-SMITH Matelite-Q
Dial Screw
The same unique “non-edge” handle
design as the Quicksliver but with
a more traditional dial tension
adjustment and Black-Smith allaround blade.
$400 5.5/6.0
$560 6.5/7.0
LEFTY $450 5.5/6.0
LEFTY $610 6.5/7.0
BLACK-SMITH Fit
BLACK-SMITH Fit Thinner 30
Innovative scissors design with a
triangular and angled finger hole
that fits almost any hand. Made
of the best cobalt/molybdenum
stainless steel alloy and crafted
Hamaguri edge, the Black-Smith
fit cuts with that true “buttery”
feel that is the standard for all
other scissors. An all around tool
for everyone’s kit.
Companion to the Fit, this 30 tooth
thinner is an all around tool that
cycles an all application from over
comb to precision shaping.
• Cutting Ratio 30%
$450
LEFTY $500
Blade/Teeth position*: Regular (shown)
“Reverse blade available at no extra
charge”
$450 5.0/5.5/6.0/6.5
LEFTY $500 5.0/5.5/6.0/6.5
BLACK-SMITH Fit
Titanium Black
Mat black titanium ceramic coating
is ideal for those allergic to stainless
steel alloys. The scratch resistant
coating insures that the seductive
look of the black titanium will remain
for the life of the scissor.
$500 5.0/5.5/6.0/6.5
BLACK-SMITH Fit Speedstar
BLACK-SMITH Fit Swivel
If you like a 180-degree traditional
single swivel, this is it! A pointy
blade and a triangular ring finger
give you comfort and stability.
$550 5.0/5.5/6.0/6.5
The one and only Mizutani double
swivel. The absolutely unique
design rotates in all directions on
an amazingly smooth ball bearing
system. If you are a swivel user, you
must try this. If you are experiencing
carpal tunnel symptoms, this could
save your career.
$600 5.0/5.5/6.0/6.5
LEFTY $650 5.0/5.5/6.0/6.5
15
16
BLACK-SMITH Fit PUFFIN
The superb scissor that can slide
and dry cut with the comfort of
wide blades. Puffin has the same
handle as the Fit Series which is truly
ergonomic for a comfortable feel.
• Fixed finger rest/tang.
$500 5.5/6.0/6.5/7.0
LEFTY $550 5.5/6.0/6.5/7.0
Titanium Black
scratching.
$550 5.5/6.0/6.5/7.0
LEFTY $600 5.5/6.0/6.5/7.0
Thinner-14
Thinner-17
Companion to the Puffin, this 14 tooth
thinner is recommened for bulk control
and even scissor over comb.
Companion to the Puffin, this 17 tooth
thinner is recommened for bulk control
and even scissor over comb.
$500
LEFTY $550
$500
LEFTY $550
Blade/Teeth position: Reverse (shown)
“Regular blade available at no extra charge”
BLACK-SMITH Fit BEAK
We imagined the beaks of wading
birds and adapted nature’s perfect
design for a superb precision scissor
for the finest detailing of any part of
a hair cut. This is a true precision and
detailing tool. The Beak has the same
handle as the Fit Series which is truly
ergonomic for a comfortable feel.
$500 5.0/5.5
LEFTY $550 5.0/5.5
BLACK-SMITH Fit BEAK
Titanium Black
scratching.
$550 5.0/5.5
LEFTY $600 5.0/5.5
BLACK-SMITH Solid
Well balanced scissors with a G-Shift wobble
prevention functionality for comfortable
handling. Thrust Bearing for ultra smooth
operation that won’t tire you out. Powerful
and long-lasting Extramarise® Steel
Processing. This is an all around scissor. For
barbering 6.5 and 7.0 are ideal.
$500 5.5/6.0
$600 6.5/7.0
17
18
BLACK-SMITH TWIG “Twiggy”
BLACK-SMITH TWIG “Twiggy”
Titanium Black
Twig aka “Twiggy” – This scissor
was designed after we took 300+
measurements of female thumbs
and ring finger distance and
positions. It has a slender body
and is extraordinarily comfortable
to hold and easy to flip (palm).
The “cats-eye” blade is pointy for
precision yet retains the power for
slide cutting.
scratching.
$550 5.0/5.5/6.0
$500 5.0/5.5/6.0
BLACK-SMITH Retro
BLACK-SMITH Pixy
Pixy has ergonomic finger rings
with larger finger holes. This even
handle scissor is ideal for any stylist.
The Hamaguri edge gives you a
smooth cutting feeling.
Retro comes from our 95 years of
scissor making. Retro is a traditonal
style of a scissor with modern
changes. A combination of cobalt
and rare metals with a Hamaguri
edge gives you a precision cutting
experience from the 70’s and point
and detail cutting of today.
Flat screw that can be adjusted from
the back.
$450 4.5/5.0/5.5/6.0/6.5
LEFTY $500 4.5/5.0/5.5/6.0/6.5
$500 5.2/5.7/6.2
BLACK-SMITH Re-tro
Titanium Black
scratching.
$500 4.5/5.0/5.5/6.0/6.5
LEFTY $550 4.5/5.0/5.5/6.0/6.5
P R E M I U M
M A T E R I A L
C O L L E C T I O N
Toughness and durability.
STELLITE alloy Series-1
“STELLITE alloy Series-1” is a straight, even
handle scissor, designed for both flexability
and stability. The butterfly handles and short
rubber coated finger rests are key features.
“STELLITE alloy Series-2” is a moderate
“chunker” with 12 teeth. Durability, soft
cutting, and smooth pull-out are the keys of
this “chunker.” The cutting edge ergonimic
handle will fit into your hand like no other.
• Newly designed ball bearing screw system.
• Removable tangs (finger rests).
• Cutting ratio: 25-30%
$1,200 5.5/6.0
$1,200
Our “STELLITE alloy Series-3” has a longer
handle stem that gives you more power and
a ergonomic handle. The center ridge blade is
designed for slide as well as precision cutting.
The 50% cobalt STELLITE alloy will give you a
powerful cutting performance.
“STELLITE alloy Series-5” is our most unique
Stellite scissor. The all around cutting blade
coupled with an advanced 3 dimentional
handle design will give you ultimate
hair cutting experience. Powerful and
comfortable, the most advanced cutting
edge design ever created.
$1,200 5.5/6.0
$1,200 5.5/6.0
19
20
The built-in spring prevents wrist/carpal tunnel issues.
SPRING HOPPER
SPRING HOPPER with Swivel Ring
The unique built-in spring works to open the
handles by themselves, and the patented
locking mechanism releases with a single
squeeze of the hand.
The scissors have no conventional thumb
ring, and the application is limitless.
If you have any problems with your wrist this
would absolutley be an ideal scissor for you.
The unique built-in spring works to open the
handles by themselves, and the patented
locking mechanism releases with a single
squeeze of the hand.
The scissors have a 180 and 360 degree
swivel thumb ring, and the application is
limitless.
$900 5.5/6.0
*It could take at least four weeks to get used to
these and will need your commitment.
*It could take at least four weeks to get used to
these and will need your commitment.
$1,100 5.5/6.0
ACCSESSORIES
Customize to Your Hand
Mizutani’s “Customize to Your Hand” is a project that is committed to
satisfy the desires of most discerning MIZUTANIST.
We offer exclusive service dedicated to one of a kind Scissor/Shear with
close attention for your choice of blade, handle, tang and screw. We also
engrave your logo, initial, and name.
Please contact us for more details.
Spray Bottle
$10
Factory Sharpening
Comb
$10
Mizutani USA / Motik, Inc. guarantees sharpening that is why we send it
back to the factory to be sharpened by the person who in addition is a
professional sharpener but also knows how to make scissors.
Why Factory Sharpening is important
Sleeve
$10
Every single factory has their own
degree of the angle on each individual
blade – we refer to it as “Factory
Angled Blade.” Therefore, factory
sharpening is recommended to
preserve the longevity of Mizutani
scissors. Only factory-authorized
sharpeners know the specific degree
of every angle in the blade allowing
them to remove a minimum amount
of steel.
If you would like to have your scissors
sharpened by Mizutani factory, please
contact us or visit mizutaniscissors.
com for more details.
Order online at
m izuta n is c is s o r s.co m
lubricant Oil
$10
Free Shipping within the U.S.
Mizutani USA / Motik Inc.
Phone: 415-361-1114 • [email protected]
21
22
mi zut anisc issor s. com

mizutaniscissors.com 1

Transcription

Similar documents

≥4810 ep semi-automatic programmable cutter

Paul Strisik NA - American Fine Art Magazine

3-D-Water-Cutting-System „STM 1020 PremiumCut 3D“

RD300 - RotoMetrics

Vegamatic Pusher

Untitled - Bron

Vegamatic Pusher T

ACE SHEAR (Harmonic Scalpel) – Need for Speed

koevo autoportante

SDT-700P - SawMaster Diamond Tools, Inc.