FISHER Accessories

BLADE ACCESSORIES
RUBBER DEFLECTOR
PLOW PARKA
Made from 2-ply heavy-duty rubber, the Rubber
Deflector keeps snow off your windshield.
Available for 7' 6" to 10' plow widths (XV2™
deflector available in either 10" or 18" lengths).
Ready-to-install hardware included.
POLY SNOFOIL®
POLY SnoFoil for the HT Series blade features
heavy-duty polyethylene construction.
STEEL DEFLECTOR
Steel Deflectors extend the height of your
blade to keep snow off the windshield, without
affecting your ability to stack snow.
STEEL SNOFOIL
The high continuous curve of the Steel SnoFoil
extends the blade to improve snow rolling
action and keep snow off the windshield.
Commercial Blade Guides are highly
visible fluorescent orange, enhanced
with “FISHER® logo” reflective tape and
available in 24" or 36" lengths.
V-PLOW BACK DRAG EDGE
STEEL CUTTING EDGE
™
COMMERCIAL BLADE GUIDE KIT
This heavy-duty FISHER® branded nylon
plow cover protects electrical and hydraulic
systems and includes elastic sewn into the
bottom for a tight, weather-resistant fit.
Made of tough high-carbon steel,
replacement Steel Cutting Edges
increase wear resistance and improve
cutting power and scraping ability.
Simple to bolt on 1/4" Back Drag
Edge optimizes V-plow back dragging
performance. (V-plow Back Drag Edge
is not compatible with curb guard or
shoe kits.)
CURB GUARD KITS
Protect the outer edge of your snowplow from
sidewalks and curbs with this simple, bolt-on
Curb Guard Kit.
BOLT-ON SHOE KIT
For use on surfaces that are rocky and/or
abrasive, the Bolt-On Shoe Kit lets you set the
scraping height of the plow, extending the life of
the cutting edge and/or base angle.
V-PLOW BLADE STOPS
Blade Stops transfer blade force to the truck
frame, reducing stress and wear on the blade
and its support structure.
BLADE WING KIT
Extend the width and performance of the
XtremeV™ and XV2™ by adding a pair of Blade
Wings. Wings extend at a 35° angle, increasing
the effective plowing width of the XtremeV by 12"
and of the XV2 by 20".
SUPER GRIP MOUNT KIT
Adhesive-backed locking strips secure snow
plow and spreader controls to interior vehicle
surfaces. Strips allow the control to be easily
removed yet held firmly in place during use.
FLEX ARM™ KIT
This quick-release, flexible control mount adjusts
to any position. The magnetic base allows for
easy removal with no mounting holes in your
dash. Can be used with most plow and spreader
controls. Base plate included.
SNOWPLOW DECAL KITS
Complete Snowplow Decal Kits include FISHER Logo, STORM GUARD™ logo,
Blade Model, and all Warning/Caution and Attach/Detach labels specified on
original production models.
FISHERPLOWS.COM |
SNOWPLOW MAINTENANCE
PLOW TRUCK ACCESSORIES
FISHER® FACTORY ORIGINAL PAINT
REVOLVING LIGHTS
Genuine factory tough paint in black,
silver, and FISHER yellow provides durable
coverage and is mixed to match your original
equipment. Available in spray cans, quarts
or gallons.
Outfit your plow truck with these top-of-theline Revolving Lights! Manufactured by Whelen
Engineering to strict FISHER® specifications.
Choose from full size strobe, mini bar, and
mini strobe.
DIELECTRIC GREASE
PROTUBE™ BUMPER / GRILLE GUARD
Fisher Engineering recommends all plow
owners use Dielectric Grease on a regular
basis to protect all electrical connections.
Specially formulated to protect your
connections in severe winter conditions.
Attractive “off-season” Bumper/Grille Guard
designed for use with either the FISHER Minute
Mount® or Minute Mount® 2 System pushplates.
Easy 10 minute bolt-on installation and no
drilling required. Mounting brackets double as
pushplate covers/skid plates and includes tabs
for mounting auxiliary fog lamps. FOG LAMPS
NOT INCLUDED.
EMERGENCY PARTS KITS
Be prepared! Emergency Parts Kits are
designed specifically for either the original
Minute Mount® 2 snowplows, or the new
FLEET FLEX system snowplows. All kits
contain high volume FISHER Genuine
Factory-Tough service parts needed for
most emergency repairs.
FISHER EZ FLOW
FISHER EZ Flow high performance hydraulic
fluid is recommended for use where
low temperatures or rapid changes in
temperatures are expected. For operating
temperatures as low as -40°F. Results in
less electrical current draw from the truck
battery during cold weather operations.
FACTORY ORIGINAL PARTS
During a big storm, genuine, Factory-Tough FISHER parts and
accessories ensure your FISHER plows and spreaders operate
at peak efficiency and reliability. There’s nothing quite like the
performance of the original.
The use of unauthorized aftermarket parts and accessories may
alter the performance of your plow and could void your warranty.
Visit your local FISHER snowplow dealer and protect your
investment with original FISHER parts and accessories.
FISHER ENGINEERING I 50 GORDON DRIVE I ROCKLAND, MAINE 04841
FISHERPLOWS.COM |
Fisher Engineering reserves the right under its product improvement policy to change construction or design details and furnish equipment
when so altered without reference to illustrations or specifications used. Fisher Engineering or vehicle manufacturer may require or recommend
optional equipment for snow removal. Do not exceed vehicle ratings with a snowplow. Fisher Engineering offers a limited warranty on all
snowplows and accessories. See separately printed page for this important information. The following are registered(®) and unregistered(™)
trademarks of Douglas Dynamics, L.L.C.: FISHER®, FLEX ARM™, HT Series™, Minute Mount®, Minute Mount® 2, ProTube™, SnoFoil®,
STORM GUARD™, XtremeV™ and XV2™.
© 2014 Douglas Dynamics, L.L.C.
All rights reserved.
A SUBSIDIARY OF DOUGLAS DYNAMICS, L.L.C.
Printed in U.S.A.
Form No. 76044 - 7/14