19-Hand Tools - Hanes Supply, Inc.

Transcription

Buffalo - Headquarters: 716.826.2636
Albany/NE Division:
518.438.0139
Rochester Division:
585.235.0160
FAX:
FAX:
FAX:
716.826.4412
Hanes Supply of SC, Inc.
518.438.5343 CCISCO: 843.238.1338
585.235.0229
FAX: 843.238.8337
SECTION INDEX
SECTION 19
Hand Tools
ADAPTERS
Pipe .....................................................19-140
Pipe Nipple Chuck...............................19-140
Stud .....................................................19-140
Threader..............................................19-132
ADAPTERS, SOCKETS
1/4" Drive.............................................19-188
3/8" Drive ...............................19-190, 19-199
1/2" Drive ...............................19-194, 19-201
3/4" Drive ...............................19-197, 19-202
1" Drive ..................................19-116, 19-203
1-1/2" Drive ............................19-118, 19-204
#5 Spline ................................19-119, 19-205
ADJUSTABLE WRENCHES ....19-185, 19-224
AIR
Drum Vacuum......................................19-109
Filtering Systems.................................19-152
Gun, Blower ........................................19-110
Gun, Vacuum.......................................19-110
Vacuum Pump.....................................19-109
ALLEN
Hex Keys .........................................19-20–21
AMMETER ...............................................19-52
ANCHOR
Expander, Machine Anchor ...................19-43
Expander, Screw Anchor.......................19-43
Setting Tool, Caulking Anchor ...............19-43
ANCHORING
Hooks, Block & Tackle...........................19-86
APRON
Nail/Screw and Tool Pouch ...................19-81
Tool ............................................19-29, 19-81
ASPHALT
Lute .....................................................19-174
Rake ....................................................19-174
AUGER
Closet ..................................................19-155
AUGER BIT
Impact Bits (Nail Eaters) .......................19-41
Kits ..................................................19-41–42
Power Drill (Nail Eater)..........................19-41
AVIATION SNIPS ...........................19-2, 19-19
AWL .........................................................19-72
BACKING OUT
Punches ..................................................19-8
BAGS
Bolt ..................................................19-84–85
Bull Pin ..................................................19-84
Compartment ........................................19-84
Contractors............................................19-28
Electrode ...............................................19-85
BALL END
Hex Key Wrenches..........................19-20–21
BAR
Carpenters ..............................................19-6
Connecting...................................19-7, 19-87
Contractors..............................................19-6
Crowbar...................................................19-7
Diamond Point.....................................19-6–7
Digging ....................................................19-7
Form Stripping.......................................19-86
Goose Neck ............................................19-6
Grizzly ...................................................19-86
Manhole Cover Lifting .............................19-8
Molding Tool ............................................19-6
Nail Puller................................................19-6
Peerless ..................................................19-7
Pinch .......................................................19-7
Pinch Point ..............................................19-7
Pry .....................................19-7, 19-103–104
Ripping.........................................19-6, 19-87
Rolling Head............................................19-7
Salvage/Contractors................................19-6
San Angelo..............................................19-6
Slate ........................................................19-7
Stripping ..................................................19-7
Telegraph Digging ...................................19-7
Utility .......................................................19-6
Warehouse ..............................................19-6
Warehouse Loading ................................19-7
Wedge Point ............................................19-7
Wrecking .................................................19-6
BARREL PINS ...............................19-8, 19-87
BASIN
Wrench ................................................19-126
BEARING
Heater .................................................19-110
Heater Monitor ....................................19-110
Heater Raising Blocks.........................19-111
Pullers .........................................19-121–122
BELT
Ironworkers......................................19-83–84
Magnetic Clip ......................................19-109
Snap Loop.............................................19-83
Suspenders ...........................................19-84
Tire Wire..........................................19-83–84
Tool ...........................19-29, 19-79, 19-83–84
BENCH
Vises ...........................................19-128–129
Work.........................................19-54, 19-101
BENDERS
Conduit ...................19-36–38, 19-77, 19-147
Electric ............................................19-36–37
Hand ...............................19-36, 19-77, 19-86
Handle ...................................................19-77
Heater .............................................19-37–38
WWW.HANESSUPPLY.COM
Hickeys.......................................19-36, 19-77
Mechanical .....................19-36, 19-77, 19-86
Offset.....................................................19-36
Pipe .................................................19-36–38
PVC .................................................19-37–38
Rebar ....................................................19-86
BEVELING
Bands ....................................................19-55
Dies .....................................................19-140
Machines ...............................................19-55
Pipe End Prep Lathes ...........................19-56
Shape Cutting Attachments ..................19-55
BIT BRACES ...........................................19-75
BLADES
Hook ....................................................19-169
Utility Knife ...............................19-27, 19-169
Wall Stripper........................................19-177
BLOCK AND TACKLE.............................19-86
BLOCKS
Sanding ...............................................19-176
BLOW GUN .............................................19-43
BOLT
Bags ................................................19-84–85
Die Heads ...........................................19-131
Dies .............................................19-131–132
Threaders.......................19-130, 19-132–140
BOX
Wrenches ....................................19-184–185
Wrenches, Ratcheting.........................19-184
BOXES
Casters ............................................19-53–54
Field Office ............................................19-54
Jobsite Storage ...............................19-53–54
Mixing.....................................19-171, 19-176
Mortar ....................................19-171, 19-176
Tool..............................................19-177–179
BRACE, BIT.............................................19-75
BRICK
Rubbing .................................................19-98
Set .......................................................19-103
BRICKLAYING TOOLS......................19-96–97
BROOM
Concrete................................................19-99
Push ....................................................19-174
Street...................................................19-174
BRUSH
Cable Pulling Duct.................................19-47
Cable Pulling Duct Mandrel ..................19-48
Copper Cleaning .................................19-147
Masonry ................................................19-97
BUCKET
Canvas ..................................................19-85
Plastic....................................................19-29
Seat .......................................................19-29
Stacker ..................................................19-28
Tool Organizer .................................19-27–29
BULL
Float ......................................................19-98
Pin Bag..................................................19-84
Pin Holder .............................................19-83
Pins .......................................................19-87
Point Chisel .........................................19-103
– continues –
19 -A
19
Hand Tools
AXES
Boy’s Axe.................................................19-4
Camp/Hunter ...........................................19-4
Double Bit................................................19-5
Fiberglass Handled ...............................19-30
Fireman’s.............................................19-175
Handles ...............................................19-4–5
Michigan ..................................................19-5
Miners ........................................19-4, 19-175
Pulaski.................................................19-175
Single Bit .............................................19-175
Equipment .............................................19-84
Grout .....................................................19-97
Hose ......................................................19-85
Parts ......................................................19-28
Power Tools ...........................................19-28
Small Parts ................................19-28, 19-84
Stacker Pockets.....................................19-28
Tool ......................................19-28, 19-84–85
Tool Roll ................................................19-28
Utility .....................................................19-84
Albany/NE Division:
518.438.0139
Rochester Division:
585.235.0160
FAX:
FAX:
FAX:
716.826.4412
518.438.5343
585.235.0229
CCISCO: 843.238.1338
FAX:
843.238.8337
SECTION INDEX
SECTION 19
Hand Tools
C-CLAMP
Copper-Plated Spindle ........................19-217
Deep Throat ...........................19-207, 19-217
Extra Heavy Duty ..................19-207, 19-218
Heavy Service........................19-207, 19-218
High Visibility .......................................19-217
No Slip.................................................19-217
Square Throat .....................................19-217
CABINET
Casters ............................................19-53–54
Field Office ............................................19-54
Flat Top..................................................19-53
Four Door ..............................................19-54
Job Box .................................................19-54
Slant Top ...............................................19-53
Tool..............................................19-177–178
Two-Door ...............................................19-54
Utility ...............................................19-53–54
Work Bench...........................................19-54
CABLE
Collars ...................................................19-93
Connect Crimper........................19-65, 19-74
Cutters ................................19-11, 19-17–18,
......................................19-49–50, 19-64–66
Grips................................................19-87–95
Knives, Insulated .................................19-213
Pullers .............................................19-45–46
Pulling Connectors .........19-48, 19-89, 19-92
Pulling Flexible Mandrel ........................19-48
Pulling Grips....................................19-87–95
Pulling Link............................................19-92
Pulling Lube Swab ................................19-47
Pulling Lubricant....................................19-47
Pulling Rope..........................................19-45
Pulling Rope Clevis ...............................19-48
Pulling Rope Safety Tips .......................19-45
Pulling Rope Stands .............................19-45
Pulling Swivel Links...............................19-92
Pulling Swivel Toggles...........................19-92
Pulling Swivels................19-48, 19-89, 19-92
Pulling Wire Duct Brush ........................19-47
Shears, Insulated ................................19-212
Sheath Splitting Knife............................19-73
Skinning Knife ............................19-73, 19-75
Splicer's Knife..................................19-73–74
Strain Relief Grips .................................19-95
Stripper............................................19-64–65
Suspension Grips............................19-94–95
Hand Tools
19
CABLE CUTTERS
ACSR ....................................................19-50
Battery Powered....................................19-50
Compact ..........................................19-49–50
Hydraulic ...............................................19-50
Insulated..........................................19-74–75
Manual .................................19-49, 19-64–66
Pliers .....................................................19-11
Ratcheting .......................................19-49–50
CADDY
Electrical Wire .................................19-48–49
CALIPERS
Dial ........................................................19-34
Digital ..............................................19-33–34
Hermaphrodite ......................................19-31
Pocket....................................................19-34
Vernier ...................................................19-34
19 -B
CARBIDE
Hole Cutter ..............................................19-3
CART
Electrical Wire .......................................19-48
Pipe .......................................................19-54
Tools ............................................19-177–178
CEILING
Sprayer ................................................19-101
CELL PHONE
Holder ........................................19-29, 19-79
CENTER
Finder Set..............................................19-32
Punch.......................................19-30, 19-102
CHAIN
Pipe Tong ............................................19-207
Vise .............................................19-128–129
Wrenches...............................19-125, 19-207
CHALK
Line .......................................................19-57
Marking .................................................19-57
Reels .....................................................19-57
Pipe ............................19-56, 19-112, 19-219
Plastic, Insulated .................................19-213
Plier Grip .............................................19-106
Sheet Metal .............................................19-1
Sliding Arm ....................19-105–107, 19-218
Spreader .................................................19-2
Spring ...........................19-2, 19-112, 19-219
Strap....................................................19-112
T-Bar....................................................19-107
T-Slot ...................................................19-108
Tight Space .........................................19-107
Variable Angle Strap ...........................19-112
Vise Grip .................................................19-1
Welders...............19-1–2, 19-56, 19-106–109
Wood Hand Screw ..............................19-111
Wood Worker...............................19-111–112
Work Hold Down ................19-1, 19-107–108
CLEANER
Drain............................................19-152–168
CLOSET
Auger...................................................19-155
CHANNELLOCK PLIERS .................19-10–11
COMBINATION
Wrenches.......................19-181–182, 19-219
CHESTS
Tool ............................19-53–54, 19-177–179
COMPRESSION
Tools ....................................................19-113
CHISEL
Brick Set..............................................19-103
Bull Point .............................................19-103
Cold .............................................19-102–103
Electricians Chisel...............................19-103
Flat ......................................................19-103
Floor ....................................................19-103
Hand Guarded.....................................19-103
Holder....................................................19-30
Kits ......................................................19-104
Mason's ...............................................19-103
Plugging ..............................................19-103
Tooth....................................................19-103
Track........................................................19-8
CONCRETE
Broom....................................................19-99
Edger.....................................................19-97
Finishing Tool ..................................19-97–99
Finishing Trowel .......................19-97, 19-100
Groover .................................................19-97
Knee Pads...........................................19-101
Rake ....................................................19-174
CIRCLE CUTTER DRYWALL ...............19-100
CIRCUIT TESTER ..................19-52, 19-66–67
CLAMPS
Angle ................19-106–107, 19-112, 19-219
Automatic (BAS)..................................19-108
Bar ....................19-1–2, 19-105–107, 19-111
Bas Machine System ..........................19-108
“C”.............................19-207, 19-217, 19-218
Cantilever ............................................19-108
Chain............................................19-1, 19-56
Claw Machine Hold Down ...................19-107
Contractors..................................19-111–112
Corner .................................................19-106
Ground ................................................19-109
Handle Grip .........................................19-106
Hold Down .........................19-1, 19-107–108
“I” Bar ..................................................19-219
Industrial......................................19-106–108
Jig and Fixture ....................................19-107
K-Body ................................................19-111
“L” ........................................................19-218
Lever ...................................................19-106
Multi Angle Vise Set ............................19-106
Panel .......................................................19-1
Pinch-Off Tool..........................................19-1
WWW.HANESSUPPLY.COM
CONDUIT
Bender ....................19-36–38, 19-77, 19-147
Bit Set..............................................19-41–42
Cutter ..................................................19-129
Fitting & Reaming Screwdriver..............19-76
Fitting Screwdriver .....................19-68, 19-76
Locknut & Reaming Pliers .........19-63, 19-76
Measuring Tape.....................................19-44
Pipe Cutter ..........................................19-129
Pipe Wrench........................................19-129
Piston ....................................................19-44
Rack ......................................................19-54
Riser Grip ........................................19-91–92
Sizing Tool ...........................................19-148
Strap Wrench ......................................19-129
Thin Wall Reamer..................................19-76
Threader ........................19-129–131, 19-137
Vise .....................................................19-129
Wrench ................................................19-129
CONNECTING BARS ....................19-7, 19-87
CONNECTOR, CABLE PULLING
Rope Clevis ...........................................19-48
Swivels............................19-48, 19-89, 19-92
CONNECTOR CRIMPING PLIERS .........19-62
CONNECTOR, WIRE PULLING
Ball Bearing Swivel ....................19-89, 19-92
Swing Link.............................................19-92
Swivel Toggle ........................................19-92
– continues –
Albany/NE Division:
518.438.0139
Rochester Division:
585.235.0160
FAX:
FAX:
FAX:
716.826.4412
518.438.5343 CCISCO: 843.238.1338
585.235.0229
FAX: 843.238.8337
SECTION INDEX
SECTION 19
Hand Tools
CONSTRUCTION
Wrench ...............19-67, 19-185–186, 19-220
DIVIDERS
Layout....................................................19-31
CONTINUITY TESTER .................19-52, 19-66
DRAG
Links ....................................................19-194
COPPER
Cleaning Brush....................................19-147
CRIMPER, CABLE CONNECTOR
Battery Powered....................................19-50
Electricians ...............19-50–51, 19-65, 19-74
Insulated................................................19-74
CRIMPER, SHEET METAL .....................19-73
CROWBAR ................................................19-7
CULTIVATORS.......................................19-174
CUTTER
Angular ..................................................19-17
B Strand ................................................19-17
Bolt...........................................19-17, 19-151
Cable...................................19-11, 19-17–18,
......................................19-49–50, 19-64–66
Center Cut .........................19-16–17, 19-151
Circle, Drywall .....................................19-100
Clipper......................................19-17, 19-151
Conduit ................................................19-129
Electric Cable ........................................19-18
End Cut Nipper .....................................19-17
Glass........................................19-35, 19-176
Hole .........................................................19-3
Hole, Pipe............................................19-143
Mattocks ..............................................19-175
Pipe, Hand .....................19-126–127, 19-129
Pipe, Machine ..........................19-55, 19-142
Plastic Coated Pipe.............................19-129
Plastic Pipe ............................19-130, 19-145
Plastic Tubing ......................................19-130
PVC ..........................................19-38, 19-77
Seam ...................................................19-177
Shear .......................................19-17, 19-212
Soil Pipe ..............................................19-127
Strap......................................................19-18
Tubing ............................19-130, 19-144–145
Wall Covering ......................................19-177
Wire Rope ...........................................19-105
CUTTING
Oil ........................................................19-134
Pipe .......19-55, 19-126–127, 19-129, 19-142
Plastic ....................................19-130, 19-145
Threading Oil.......................................19-134
Wheel, Pipe.........................................19-127
Wheel's, Tubing ...................................19-145
DEBURRING TOOLS
Plastic ....................................19-129, 19-148
DEPTH
Gauge ...................................................19-57
DRAIN
Cleaner Cables ...................................19-166
Cleaners ......................................19-155–168
Closet Auger .......................................19-155
Hand Spinners ....................................19-155
Inspection Equipment..................19-152–154
Jetter ..............................19-155, 19-167–168
Line Locator ........................................19-152
See Snakes.................................19-153–154
Sewer Tape..........................................19-156
Video Inspection..........................19-153–154
Water Blasting................19-155, 19-167–168
DRIFT
Pins ..............................................19-8, 19-87
DRILL
Cable Installation...................................19-42
Gauge ...................................................19-33
Hole Enlarging.........................................19-3
Placement Tool......................................19-42
Press Vises .........................................19-216
Shaft, Flexible........................................19-42
Step .........................................................19-3
DRIVERS
Nut.........................................................19-72
DRUM
Cap Opener.........................................19-220
Pump ...................................................19-109
Vacuum Pump.....................................19-109
DRYWALL
Board Lifter..........................................19-100
Circle Cutter ........................................19-100
Floats ..................................................19-100
Mixers..................................................19-177
Patcher ................................................19-176
Tools ............................................19-176–177
D'VERS BIT SYSTEM .............................19-42
EDGER
Concrete................................................19-97
DIES
Beveling...............................................19-140
Grooving..............................................19-140
Heads, Threading..................19-129, 19-131,
........................19-133, 19-136–137, 19-140
Threading......................19-131–132, 19-134,
...................................................19-137–140
EQUIPMENT
Bags ......................................................19-84
DISPENSER
Conduit Measuring Tape .......................19-44
Electrical Wire .......................................19-49
ERECTION
Wrench ...............19-67, 19-185–186, 19-220
Wrench Holder ......................................19-83
DITCH
Bank Blade..........................................19-174
EXPANDER
Tubing..................................................19-148
ELECTRODE
Bag ........................................................19-85
FEELER
Gauge ......................................19-33, 19-208
FIBER OPTIC
Cable Stripper .......................................19-64
FIELD OFFICE
Storage Box...........................................19-54
FILES
Aluminum ..............................................19-13
American Pattern ..................................19-15
Cabinet ..................................................19-13
Cantsaw ................................................19-13
Chain Saw.............................................19-14
Cleaners ................................................19-16
Crosscut ................................................19-14
Die Sinkers............................................19-15
Flat ........................................................19-14
Half Round ............................................19-14
Hand......................................................19-14
Handles .................................................19-16
Knife ......................................................19-14
Lathe .....................................................19-14
Mill .........................................................19-14
Needle ...................................................19-16
Rasp ......................................................19-15
Rifflers ...................................................19-15
Round....................................................19-14
Square...................................................19-14
Swiss Pattern ........................................19-15
Tapered ...........................................19-14–15
Terminology...........................................19-13
Thread ...................................................19-31
Thread Repair .......................................19-31
Three Square ........................................19-15
FILTERING
Air System...........................................19-152
FISHING
Blow Gun Kit .........................................19-43
Conduit Piston.......................................19-44
Line .......................................................19-44
Portable System ....................................19-43
Reels, Winder ............................19-44, 19-78
Systems ..........................................19-43–44
Tapes ...................................19-43, 19-77–78
Vacuum/Blowers....................................19-43
FLANGE
Jacks ...................................................19-207
Pins .......................................................19-56
FLARING
Tools ....................................................19-146
FLASHLIGHT
Holder ........................................19-79, 19-82
FLOAT
Adapters ................................................19-98
Brackets ................................................19-98
Bull ........................................................19-98
Concrete..........................................19-97–98
Drywall ................................................19-100
Handles .................................................19-98
Magnesium............................................19-97
Mounting Plate ......................................19-98
Plastering ............................................19-100
– continues –
WWW.HANESSUPPLY.COM
19 -C
19
Hand Tools
ELECTRICIANS
Belt.......................................19-78–79, 19-83
Chisels ................................................19-103
Hammers...............................................19-76
Insulated Tools ................................19-74–75
Knife Holders.........................................19-82
Knives..............................................19-73–75
Pouches ..........................................19-78–79
Scissors.................................................19-64
Scissors/Knife Holder ............................19-82
Suspenders................................19-79, 19-84
Tool Holders .........................19-79, 19-81–83
EXTRACTORS
Pipe .....................................................19-129
Screw ..................................................19-151
Albany/NE Division:
518.438.0139
Rochester Division:
585.235.0160
FAX:
FAX:
FAX:
716.826.4412
518.438.5343
585.235.0229
CCISCO: 843.238.1338
FAX:
843.238.8337
SECTION INDEX
SECTION 19
Hand Tools
Rubber.................................................19-100
Wood .....................................................19-98
GROUT
Bags ......................................................19-97
Monitor, Bearing ..................................19-110
Pyrometer/thermometer ......................19-111
FORK
Handles ...............................................19-122
GUN
Air Vaccum ..........................................19-110
Glue.......................................................19-10
Hopper ................................................19-101
Soldering .............................................19-148
Staple ......................................................19-9
HEATER
Bearing................................................19-110
PVC Pipe Bending ..........................19-37–38
FREEZING
Pipe Tool..............................................19-148
GAGE ............................................See GAUGE
GARDENING
Tools ............................................19-174–175
GASKET
Scraper................................................19-208
GAUGE
Depth.....................................................19-57
Drill ........................................................19-33
Feeler .......................................19-33, 19-208
Radius ...................................................19-33
Screw & Wire.........................................19-33
Screw Pitch ...........................................19-32
Sheet Metal ...........................................19-33
Telescoping ...........................................19-32
Thickness ..............................................19-33
Wire .......................................................19-33
GAUGING
Trowel ....................................................19-96
GEAR
Puller ...................................................19-121
GFCI
Tester.....................................................19-52
GLASS
Cutter .......................................19-35, 19-176
GLUE
Gun .......................................................19-10
Sticks.....................................................19-10
GRASS
Shear...................................................19-175
Trimmer ...............................................19-174
GRIPPING
Pliers, Insulated...................................19-212
Hand Tools
19
GRIPS
A.C.S.R. ................................................19-87
Aluminum ..............................................19-87
Bare Wire ..............................................19-87
Cable ...............................................19-87–95
Chicago ...........................................19-87–88
Conductors ......................................19-87–88
Conduit Riser ........................................19-91
Guy Strand ............................................19-88
Haven ....................................................19-89
Messenger Line.....................................19-88
Pulling .............................................19-87–95
Strain Relief...........................................19-95
Stranded Copper...................................19-87
Suspension .....................................19-94–95
Telephone Cable ...................................19-88
Weather Proof Wire...............................19-88
Wire .................................................19-87–95
Wire Mesh .......................................19-89–95
GROOVER
Concrete................................................19-97
Roll, Pipe.....................................19-141–142
GROOVING
Dies .....................................................19-140
19 -D
HACK
Saws................................................19-75–76
HAMMERS
Back Out .................................................19-8
Compo-Cast ........................................19-169
Copper Face..........................................19-30
Cross Peen..............................................19-4
Curved Claw ..............................19-26, 19-76
Dead Blow ......................19-26, 19-30, 19-76
Drilling ..........................................19-4, 19-26
Drywall ..................................................19-26
Electricians............................................19-76
Engineers ................................................19-4
Estwing..................................................19-26
Fiberglass Handled ...............................19-26
Geologist ...............................................19-26
Hand Drill ................................................19-4
Handles ...................................................19-4
Holders.......................................19-79, 19-81
Linesmen...............................................19-76
Mallet .........................................19-26, 19-30
Masons..................................................19-26
Mill Face ................................................19-26
Non-Spark ...........................................19-169
Nylon Face ............................................19-30
Plastic Face...........................................19-30
Raw Hide...............................................19-30
Rock Pick ..............................................19-26
Shingler's...............................................19-26
Sledge........................................19-4, 19-169
Soft Face ......................19-26, 19-76, 19-169
Split-Head .............................................19-30
Straight Claw..............................19-26, 19-76
Tile Setter..............................................19-26
Urethane Face.......................................19-30
Welders .................................................19-26
HAND
Tool Guards.........................................19-103
HANDLES
Fork .....................................................19-122
Hoe......................................................19-123
Hook ....................................................19-123
Pike Pole .............................................19-123
Post Hole Diggers ...............................19-124
Rake ............................................19-122–123
Shovels........................................19-123–124
Spoon Shovel ......................................19-124
Telegraph Shovel.................................19-124
HATCHETS
Carpenters ............................................19-26
Half ..........................................................19-4
Shingler's...............................................19-26
HAWK
Callus Preventer..................................19-100
Drywall/Plaster ....................................19-100
HEAT
Measurer .............................................19-111
WWW.HANESSUPPLY.COM
HEDGE
Shears .................................................19-175
HEX
Ball Hex Wrenches..........................19-20–21
Bit Sockets ....................19-116, 19-188–189,
................19-192, 19-195–196, 19-221–222
Bit Sockets, Insulated..................19-209–210
Key Wrenches .................................19-20–22
Pipe Wrenches ....................................19-126
HICKEY
Conduit .........................19-36, 19-77, 19-147
Rebar ....................................................19-86
HOE
Garden ................................................19-174
Handles ...............................................19-123
Mason/Plaster .....................................19-174
HOLDER
Bull Pin ..................................................19-83
Cable Splicer’s Knife .............................19-82
Cell Phone .................................19-29, 19-79
Chisel ....................................................19-30
Erection Wrench....................................19-83
Flashlight....................................19-79, 19-82
Hammer .....................................19-79, 19-81
Linesmen’s Knife ...................................19-82
Multi-Purpose ........................................19-79
Pliers .....................................................19-82
Pliers & Ruler ........................................19-83
Pliers & Screwdriver..............................19-83
Pliers, Ruler & Screwdriver ...................19-82
Pocket Knife ..........................................19-82
Punch ....................................................19-30
Scissors.................................................19-82
Scissors & Knife ....................................19-82
Snap Loop.............................................19-83
Tape Rule...................................19-79, 19-82
Utility Knife ............................................19-82
Voltage Tester........................................19-82
HOLE
Cutter ......................................................19-3
Cutter, Pipe .........................................19-143
Punching ....................19-38–41, 19-102–104
HOLE SAWS
Recessed Lights....................................19-42
HOOKS
Anchoring ..............................................19-86
Block & Tackle .......................................19-86
Ensilage ..............................................19-175
Grappler ..............................................19-156
Manure ................................................19-174
Potato ..................................................19-174
Safety Latches, Hoists ........................19-208
Stone/Ballast .......................................19-175
HOPPER
Gun .....................................................19-101
HOSE
Bag ........................................................19-85
Clamp Pliers..........................................19-64
– continues –
Albany/NE Division:
518.438.0139
Rochester Division:
585.235.0160
FAX:
FAX:
FAX:
716.826.4412
518.438.5343 CCISCO: 843.238.1338
585.235.0229
FAX: 843.238.8337
SECTION INDEX
SECTION 19
Hand Tools
HYDRAULIC
Bearing Puller......................................19-122
Cable Cutters ........................................19-50
Conduit Benders ...................................19-37
Crimpers................................................19-51
Gear Puller ..........................................19-122
Hole Making ....................................19-39–40
Roll Groover ................................19-141–142
Swaging Tools .....................................19-113
INSPECTION
Mirrors ...................................................19-35
INSULATED
Bare Wire Caps...................................19-213
Box Wrenches .....................................19-209
Cable Cutters ........................................19-74
Cable Shears ......................................19-212
Clamp ..................................................19-213
Crimping Tools.......................................19-74
Diagonal Pliers ......................................19-74
1/2" Drive Tools ..................................19-210
Hand Tools ..................................19-208–213
Knives ......................................19-75, 19-213
Linesmen's Knife ...................................19-75
Long Nose Pliers...................................19-74
Nut Drivers ...............................19-75, 19-213
Open End Wrenches...................19-208–209
Pliers ................................19-74, 19-210–212
Screwdrivers ............................19-75, 19-213
Side Cutters ..........................................19-74
3/8" Drive Tools ...................................19-209
Tool Sets .............................................19-212
Torque Wrenches ................................19-210
Wire Rope Shears...............................19-212
Wire Strippers ..........................19-75, 19-211
IRON WORKERS
Bags ................................................19-84–85
Belts ................................................19-83–84
Bull Pin Holders ....................................19-83
Pliers ..........................................19-11, 19-58
Suspenders ...........................................19-84
Tool Buckets ..........................................19-85
Tool Holders ....................................19-81–83
Tool Pouches...................................19-80–81
IRONS
Soldering .........................................19-18–19
JACKS
Flange .................................................19-207
JOBSITE
Storage Cabinets ............................19-53–54
JOINT
Raker.....................................................19-96
Ergonomic .............................................19-27
Exacto ...................................................19-27
Flooring ...............................................19-176
Folding .................................19-27, 19-73–74
Glazier .................................................19-176
Holders .............................19-8, 19-79, 19-82
Insulated................................................19-75
Linesmen's .................................19-73, 19-75
Linoleum..............................................19-176
Pocket....................................................19-73
Putty ....................................................19-176
Razor .......................................19-27, 19-177
Skinning .....................................19-73, 19-75
Snap-off Blade ....................................19-177
Splicers ...........................................19-73–74
Splitting .................................................19-73
Taping....................................................19-99
Utility ........................................19-27, 19-169
Utility Blades ............................19-27, 19-169
LASER
Levels.......................................19-23, 19-150
Rotary ......................................19-23, 19-150
Torpedo Level......................................19-150
Vertical ..................................................19-23
LATCHES
Safety, Hoist Hook...............................19-208
LATHES
Pipe End Prep .......................................19-56
LETTERING
Stamps ................................................19-224
Stencils................................................19-225
LEVELS
Aluminum ........................................19-22–23
Bulls Eye ...............................................19-24
Laser ........................................19-23, 19-150
Laser, Torpedo .........................19-23, 19-150
Line .......................................................19-24
Magnetic..........................................19-22–23
Mahogany..............................................19-23
Pocket....................................................19-24
Speed ....................................................19-22
Torpedo ....................................19-23, 19-150
Vertical Laser ........................................19-23
LIFTER
Drywall Board......................................19-100
LINE
Fishing...................................................19-44
LINESMEN'S
Hammer ................................................19-76
Knife................................19-73, 19-75, 19-82
Pliers, Insulated...................................19-210
Wrenches ..............................................19-67
MAGNETIC
Belt Clip...............................................19-109
Pickup Tool ............................................19-35
Scriber...................................................19-30
Squares ...............................................19-109
Sweep .................................................19-109
Wand ...................................................19-109
Welders Ground Clamp.......................19-109
Welders Link .........................................19-35
Welders Square ..................................19-109
MAGNETS
Alnico ....................................................19-35
Button ....................................................19-35
Clamps ................................................19-109
Horseshoe .............................................19-35
Industrial..............................................19-109
Pocket....................................................19-35
MAGNIFIER
Illuminated .............................................19-35
MALLETS
Plastic....................................................19-30
Rawhide ................................................19-30
Rubber .......................................19-26, 19-30
MANHOLE
Cover Lifter..............................................19-8
MARKING
Chalk .....................................................19-57
MASONRY
Brush.....................................................19-97
MASONS
Chisel ..................................................19-103
MATERIAL LIFTING
Block & Tackle .......................................19-86
MATTOCKS
Cutter .........................................19-5, 19-175
Garden Cutter .....................................19-175
Handles ...................................................19-5
Pick ............................................19-5, 19-175
MAUL .........................................................19-8
MEASURING
Depth Gauge.........................................19-57
Surveyors Rope.....................................19-57
Wheels ..................................................19-57
KEYS
Allen Wrench ...................................19-20–21
Ball Hex Wrenches..........................19-20–21
Hex Wrench.....................................19-20–21
LINK
Cable Pulling .........................................19-92
Drag.....................................................19-194
MICROMETER...................................19-33–34
KNEE
Pads ....................................................19-101
LINOLEUM
Knife ....................................................19-176
MILLING
Machine Vise.......................................19-216
KNIVES
Blades, Utility ...........................19-27, 19-169
Broad...................................................19-176
Cable..................................19-73–74, 19-213
Coping ...................................................19-73
Dismantling, Insulated.........................19-213
Electricians............................................19-73
LOOPERS
By-Pass....................................19-29, 19-175
MIRRORS
Inspection ..............................................19-35
LUBRICANT
Cable Pulling .........................................19-47
– continues –
MAGNESIUM
Float ......................................................19-98
WWW.HANESSUPPLY.COM
19 -E
19
Hand Tools
METERS
Ammeter................................................19-52
Clamp-on...............................................19-52
Current ..................................................19-52
Electric ..................................................19-52
Frequency .............................................19-52
Micrometer ......................................19-33–34
Multimeter .............................................19-52
Resistance .................................19-52, 19-66
Voltage ..................................................19-52
Albany/NE Division:
518.438.0139
Rochester Division:
585.235.0160
FAX:
FAX:
FAX:
716.826.4412
518.438.5343
585.235.0229
CCISCO: 843.238.1338
FAX:
843.238.8337
SECTION INDEX
SECTION 19
Hand Tools
MIXER
Boxes .....................................19-171, 19-176
Drywall .....................................19-99, 19-177
Paint ....................................................19-177
Pans .......................................19-171, 19-176
Plaster ...................................................19-99
MONITOR
Bearing Heater ....................................19-110
MORTAR
Hoe Handles .......................................19-123
Hoes ............................................19-174–175
Mixing Pans/Boxes.................19-171, 19-176
MULTIMETER ..........................................19-52
MULTIPLIER
Torque .................................................19-206
NAIL
Puller .......................................................19-6
Set .......................................................19-102
NIPPERS
Concretors.............................................19-11
Cutting ...................................................19-11
End Cut ......................................19-11, 19-17
NIPPLE
Chuck, Pipe.........................................19-140
NON SPARKING
Hammer ..............................................19-169
NOTCHER
Sheet Metal ...........................................19-73
NUMBERING/LETTERING
Stamp ..................................................19-224
Stencil .................................................19-225
NUT
Drivers ..........................19-72, 19-75, 19-213
Splitters .................................................19-31
OIL
Thread Cutting ....................................19-134
OILER
Thread Machine ..................................19-134
ORGANIZER
Tool..................................................19-27–28
PAN
Drywall ..................................................19-99
Mortar ....................................19-171, 19-176
Mud .......................................................19-99
PATCHER
Drywall ................................................19-176
PENCILS
Carpenters ............................................19-24
Hand Tools
19
PICK
Clay .........................................................19-6
Handles ...............................................19-5–6
Mattocks.....................................19-5, 19-175
PICKUP
Tools...................................19-34–35, 19-109
PIN
Barrel ...........................................19-8, 19-87
Bull ........................................................19-87
Drift ..............................................19-8, 19-87
Flange ...................................................19-56
Punches .................................19-102, 19-104
19 -F
PIPE
Adapters, Nipple Chuck ......................19-140
Aligning Clamp ......................................19-56
Assembly Tool .....................................19-128
Bands, Welding .....................................19-55
Beveler .....................................19-55, 19-140
Carts......................................................19-54
Chain Clamps........................................19-56
Clamps .......................19-56, 19-112, 19-219
Cutters ...........................19-126–127, 19-129
Cutting Machines .....................19-55, 19-142
Cutting Wheels ....................................19-127
Die Heads ...19-129, 19-131, 19-137, 19-140
Dies ..........19-131–132, 19-134, 19-137–140
Extractors ............................................19-129
Flange Aligning Pins .............................19-56
Freezing Tool .......................................19-148
Hole Cutters ................................19-143–144
Lathes ...................................................19-56
Nipple Chucks .....................................19-140
Pressure Testing Pumps .....................19-148
Racks ....................................................19-54
Reamers......................................19-128–129
Roll Groover ................................19-141–142
Soil, Assembly Tools ...........................19-128
Strap Wrenches .....................19-126, 19-129
Tapping Tools ..............................19-143–144
Taps.....................................................19-129
Thawing Tools .....................................19-149
Threaders, Manual ......................19-130–132
Threaders, Powered ....................19-132–140
Wrenches .........19-125–126, 19-129, 19-220
PLASTER
Hoe......................................................19-174
Midget ...................................................19-61
Multipurpose..........................................19-27
Needle Nose ...................................19-61–62
Nipper ........................................19-11, 19-58
Nut Buster .............................................19-10
Pinch Off .................................................19-1
Plastic Cutting ..............................19-1, 19-63
Pump Pliers ...............................19-64, 19-74
Rebar ....................................................19-58
Sheet Metal .............................................19-1
Short Nose.................................19-11, 19-62
Side Cutting.......19-10, 19-58, 19-74, 19-211
Skinner ............................................19-62–63
Slip Joint ....................................19-11, 19-63
Snap Ring .............................................19-63
Telephone System.................................19-62
Tongue and Groove ...................19-10, 19-64
Vise Grip .................................................19-1
Welding Clamp ........................................19-1
Wire Cutting ..........................................19-11
PLUMB BOBS .........................................19-25
POINTING
Trowels ..................................................19-96
POST HOLE
Diggers ................................................19-172
Handles ...............................................19-124
POUCHES
Apron .........................................19-29, 19-81
Belted.........................................19-29, 19-81
Closeable ..............................................19-79
Nail/Screws & Tool ................................19-81
Tool ......................................19-29, 19-78–81
Utility ...............................................19-79–80
PLASTIC
Clamps ................................................19-213
Cutters Pipe ...........................19-130, 19-145
Cutting Pliers .............................19-11, 19-63
Deburring, Pipe ......................19-129, 19-148
Reamer, Pipe ......................................19-128
Threading Dies, Pipe...........................19-131
Tubing Cutters .....................................19-130
PROTRACTOR
Magnetic................................................19-24
PLIERS
Alligator ..................................19-208, 19-212
Bell System ...........................................19-62
Cable Cutter ..........................................19-11
Channellock.....................................19-10–11
Concretor ..............................................19-11
Conduit Locknut & Reaming Pliers .......19-63
Connector, Crimping .............................19-62
Cutting Nipper ............................19-11, 19-58
Diagonal....................................19-11, 19-59,
....................................19-62, 19-74, 19-211
Duckbill............................................19-60–61
End Cutter..................................19-11, 19-58
Flat Nose .................................19-60, 19-211
Gripping...............................................19-212
High Leverage ..............19-11, 19-74, 19-211
Holders ............................................19-82–83
Hose Clamp ..........................................19-64
Insulated ...19-62–63, 19-74–75, 19-210–212
Ironworkers............................................19-11
Lamp Cap Extractor ..............................19-63
Linesmen Pliers ............19-11, 19-58, 19-210
Locking ....................................................19-1
Long Nose ...19-10, 19-60–62, 19-74, 19-211
PRY BAR..............................19-7, 19-103–104
WWW.HANESSUPPLY.COM
PRUNER
Anvil.....................................................19-175
Bypass ................................................19-175
Saw.................................19-3, 19-29, 19-175
Stick.......................................................19-29
Tree ..........................................19-29, 19-175
PULLERS
Bearing........................................19-121–122
Cable ...............................................19-45–46
Gear ....................................................19-121
Nail ..........................................................19-6
Hydraulic, Bearing...............................19-122
PULLING
Grips, Wire ......................................19-89–94
PUMP
Drum Vacuum......................................19-109
Pipe Pressure Testing .........................19-148
Pliers .....................................................19-64
PUNCH
Back Out .................................................19-8
Center .........................19-30, 19-102, 19-104
Hand Guarded.....................................19-103
Holders ..................................................19-30
Hole .................................................19-38–41
Kits, Hand....................................19-103–104
Knock Out .......................................19-38–40
Line-up ................................................19-102
Metal Stud .............................................19-41
– continues –
Albany/NE Division:
518.438.0139
Rochester Division:
585.235.0160
FAX:
FAX:
FAX:
716.826.4412
518.438.5343 CCISCO: 843.238.1338
585.235.0229
FAX: 843.238.8337
SECTION INDEX
SECTION 19
Hand Tools
Nail Set................................................19-102
Pilot Punch ..........................................19-104
Pin..........................................19-102, 19-104
Plug .........................................................19-8
Prick .......................................19-102, 19-104
Solid .......................................19-102, 19-104
Tie ...........................................................19-8
Track........................................................19-8
PVC
Cutters ........................19-77, 19-130, 19-145
PYROMETER ........................................19-111
RACK
Conduit and Pipe Storage.....................19-54
RADIUS
Gauge ...................................................19-33
RAKES
Asphalt Lute ........................................19-174
Asphalt/Tar ..........................................19-174
Bow .....................................................19-173
Concrete..............................................19-174
Handles .......................................19-122–124
Landscape...........................................19-174
Lawn....................................................19-173
Leaf .....................................................19-173
Level Head ..........................................19-173
Road/Stone .........................................19-173
RATCHET
Box Wrench.........................................19-184
REAMER
Conduit ..................................................19-76
Pipe .............................................19-128–129
Plastic Pipe .........................................19-129
Tubing..................................................19-148
REAMING
Pliers .....................................................19-76
Screwdriver ...........................................19-76
REBAR
Benders .................................................19-86
Hickey....................................................19-86
Pliers .....................................................19-58
Shears ...................................................19-86
Threading Dies....................................19-138
Tools ......................................................19-86
REEL
Caddies ...........................................19-48–49
Chalk Line .............................................19-57
Drywall Tape........................................19-100
Power Fishing........................................19-44
Rollers ...................................................19-49
Stands ...................................................19-49
RESTORERS
Thread .........................................19-112–113
RIVET
Gun ...................................................19-9–10
ROLL
Grooving, Pipe ............................19-141–142
ROLLER
Reel .......................................................19-49
ROOFERS
Shovels................................................19-172
RULES
Depth Gauge.........................................19-57
Folding.............................................19-12–13
Machinist .........................................19-31–32
Stainless................................................19-32
Steel ................................................19-31–32
Tapes ..............19-11–12, 19-25, 19-169–170
SANDER
Drywall ..................................................19-99
Hand......................................................19-99
Pole .......................................................19-99
Sponge ..................................................19-99
SANDING
Blocks..................................................19-176
SAW
Bow ..............................................19-3, 19-30
Coping .....................................................19-2
Dove Tail..................................................19-2
Folding...................................................19-29
Hand........................................................19-2
Horses .................................................19-101
Metal Cutting .......................................19-142
Pruning ...........................19-3, 19-29, 19-175
Wall Board...............................................19-2
SCISSOR
Electricians............................................19-64
Holder....................................................19-82
Plastic/PVC Cutter .................19-130, 19-145
SCOOP
Shovel Handles ...........................19-123–124
Shovels................................................19-173
SCRAPERS
Barn.....................................................19-174
Gaskets..................................19-103, 19-208
Ice .......................................................19-174
Paint ....................................................19-177
Sidewalk ..............................................19-174
Wallpaper ............................................19-177
SCRATCH
Awl.........................................................19-72
SCREW
Extractor ..............................................19-151
Pitch Gauge ..........................................19-32
SCREW AND WIRE GAUGE...................19-33
SCREWDRIVERS
Cabinet Tip...........................19-68–70, 19-75
Conduit Fitting/Reaming ............19-68, 19-76
Crank Action Handle .............................19-69
Cushion Grip........................19-68–69, 19-71
Electricians..................................19-212–213
Electronics...........................................19-213
5 In 1 .....................................................19-71
Holders ............................................19-82–83
Insulated ..........................19-75, 19-212–213
Jewelers ................................................19-34
Magnetic................................................19-71
Oversized Handle............................19-70–71
WWW.HANESSUPPLY.COM
Phillips ............19-68–71, 19-75, 19-212–213
Pocket Clip ............................................19-69
Ratcheting..................................19-69, 19-71
Reversible Blade ...................................19-71
Screw-Holding..........................19-72, 19-213
Sets............................................19-69, 19-71
Slotted ............19-68–72, 19-75, 19-212–213
Square Recessed Tip ................19-68, 19-75
Stubby .............................................19-70–71
10 In 1 ...................................................19-71
Torx Tip .................19-68, 19-71, 19-212–213
SCRIBER .................................................19-30
SEAMER
Sheet Metal ...........................................19-72
SELF-FEED
Wood Boring Bits ............................19-41–42
SETUP
Wedges ...............................................19-208
SHEARS
Cable, Insulated ..................................19-212
Grass...................................................19-175
Hedge..................................................19-175
Rebar ....................................................19-86
Wire Rope, Insulated...........................19-212
SHEAVES
Cable Puller.....................................19-46–47
SHEET METAL
Crimper .................................................19-73
Gauge ...................................................19-33
Notcher..................................................19-73
Pliers .......................................................19-1
Seamer..................................................19-72
SHOVELS
Coal .....................................................19-173
D-Handle................................19-172, 19-175
Emergency ..........................................19-173
Handles .......................................19-123–124
Long Handle........................................19-171
Roofers................................................19-172
Scoop ..................................................19-173
Snow ...................................................19-176
Spade ..................................................19-172
SLEDGE
Hammers ...................................19-4, 19-169
Handles ...................................................19-4
SMALL PARTS
Bags ......................................................19-84
SNAP RING
Pliers .....................................................19-63
SNIPS
All Purpose ................................19-19, 19-26
Aviation ........................................19-2, 19-19
Duct .......................................................19-19
Fiber Optic.............................................19-26
Multipurpose ..............................19-19, 19-26
Pipe .......................................................19-19
Stainless Cutting ...................................19-19
Tinners ....................................................19-2
SNOW
Shovels................................................19-176
SOCKETS
Customized .........................................19-121
– continues –
19 -G
19
Hand Tools
RIPPING
Bar.........................................................19-87
ROPE
Cable Pulling .........................................19-45
Composite .............................................19-45
Multiplex ................................................19-45
Stands ...................................................19-45
Surveyors ..............................................19-57
Swivels ..................................................19-48
Albany/NE Division:
518.438.0139
Rochester Division:
585.235.0160
FAX:
FAX:
FAX:
716.826.4412
518.438.5343
585.235.0229
CCISCO: 843.238.1338
FAX:
843.238.8337
SECTION INDEX
SECTION 19
Hand Tools
SOCKETS, 1/4" DRIVE
Adapters ..............................................19-188
8 Point....................................19-188, 19-220
Extensions...........................................19-187
Flex Handle .........................................19-187
Hex Bits .......................................19-188–189
Metric ..................................................19-189
Phillips Screw Bits...............................19-189
Ratchets ..............................................19-187
Sets........................................19-189, 19-222
6 Point....................................19-188, 19-199
Slotted Screw Bits ...............................19-189
Speeder...............................................19-187
Spinner Handle ...................................19-188
T-Handle ..............................................19-187
Torx Bit ................................................19-189
12 Point ...............................................19-188
Universal .............................................19-188
SOCKETS, 3/8" DRIVE
Adapters.................................19-190, 19-199
Crowfoot ......................................19-219–220
8 Point....................................19-191, 19-221
Extensions ................19-190, 19-199, 19-209
Flex Handle .........................................19-190
4 Point .................................................19-191
Hand Impact Driver .............................19-199
Hex Bits ....................19-192, 19-209, 19-220
Insulated..............................................19-209
Metric................19-193–194, 19-200, 19-209
Phillips Screw Bits...............................19-192
Ratchets.................................19-190, 19-209
Sets ............19-193, 19-200, 19-220, 19-223
6 Point...........................19-191, 19-193–194,
................................19-200, 19-209, 19-220
Spark Plug...........................................19-191
Spinner ................................................19-190
T-Handle.................................19-190, 19-209
Torque Wrenches ........................19-206–207
12 Point.....................19-191, 19-193, 19-200
Universal Joint .......................19-190, 19-199
Universal Socket .................................19-191
Hand Tools
19
SOCKETS, 1/2" DRIVE
Adapters.................................19-194, 19-201
Crowfoot ..............................................19-220
Drag Links ...........................................19-194
8 Point .................................................19-195
Extensions ................19-194, 19-200, 19-210
Flex Handle .........................................19-194
Hex Bit ...........................19-195–196, 19-210
Insulated..............................................19-209
Metric................19-196–197, 19-201, 19-210
Phillips Screw Bit.................................19-196
Ratchet, Construction..........................19-194
Ratchet, Linesmen ..............................19-194
Ratchets.................................19-194, 19-209
Sets ..........................19-196, 19-201, 19-223
6 Point .........19-195, 19-201, 19-210, 19-221
Speeder...............................................19-194
Spinner ................................................19-194
Stud Remover .....................................19-194
T-Handle.................................19-194, 19-209
Torque Wrench...............19-206–207, 19-210
12 Point ...............................................19-195
Universal Joint .......................19-194, 19-201
SOCKETS, 3/4” DRIVE
Adapters.................................19-197, 19-202
8 Point....................................19-202, 19-221
Extension ...............................19-197, 19-202
Flex Handles .......................................19-197
Hex Bit.........................................19-221–222
Metric .....................................19-198, 19-203
O-Ring .................................................19-202
Ratchets ..............................................19-197
Retainers .............................................19-202
Sets .....................................................19-198
6 Point............................19-197, 19-202–203
Torque Wrench ............................19-206–207
T-Handle ..............................................19-197
12 Point ...............................................19-197
Universal Joint .......................19-197, 19-202
SOCKETS, 1" DRIVE
Adapters.................................19-116, 19-203
Budd Wheel.........................................19-116
8 Point....................................19-116, 19-222
Extensions ................19-116, 19-198, 19-203
Flex Handle .........................................19-198
Hex Driver ...........................................19-116
Metric ..................................................19-115
Ratchets ..............................................19-198
Retainers................................19-116, 19-203
Sets .....................................................19-199
6 Point.......19-114–115, 19-198, 19-203–204
Torque Wrenches ........................19-206–207
12 Point ...............................................19-199
Universal Joints......................19-116, 19-203
SOCKETS, 1-1/2" DRIVE
Adapters.................................19-118, 19-204
Castellated ..........................................19-222
Extensions...........................................19-118
Metric ..........................................19-117–118
O-Rings ...............................................19-204
Retainers........................19-118, 19-204–205
6 Point....................19-116–118, 19-204–205
Spanner...............................................19-222
Universal Joints ...................................19-118
SOCKETS, 2-1/2" DRIVE
Castellated ..........................................19-222
O-Ring .................................................19-205
Retainer...............................................19-205
6 Point .................................................19-205
Spanner...............................................19-222
SOCKETS, #5 SPLINE
Adapters.................................19-119, 19-205
Budd Wheel.........................................19-119
Extensions...........................................19-119
Metric ..................................................19-119
Retainers .............................................19-119
6 Point............................19-118–119, 19-206
Universal Joint.....................................19-119
SPIKE
Lifter ........................................................19-8
SPLITTER
Nut.........................................................19-31
SPOON
Shovel Handle .....................................19-124
SPRING
Clamp ..................................................19-112
Installing Tool.........................................19-72
SPUD
Wrench....................................19-67, 19-126,
......................................19-185–186, 19-220
Wrench Holder ......................................19-83
SQUARES
Aluminum ........................................19-24–25
Combination ..........................................19-24
Framing .................................................19-25
Layout....................................................19-25
Rafters...................................................19-25
“T”........................................................19-101
Welders, Magnetic...............................19-109
STAMP
Steel ....................................................19-224
STAND
Reel .......................................................19-49
STAPLER
Electric ....................................................19-9
Hammer ..................................................19-9
Hand........................................................19-9
Plier .........................................................19-9
Tacker ......................................................19-9
Wire Tacker..............................................19-9
STENCILS .............................................19-225
STEP
Drill ..........................................................19-3
STILTS ...................................................19-101
STRAIGHT
Edges ....................................................19-25
STRAP
Clamp ..................................................19-112
Wrench .......................19-68, 19-126, 19-129
STRIKING
Wrenches...............19-119–121, 19-186–187
STRIPPER
Cable ...............................................19-64–65
Wall Paper ...........................................19-177
Wire ..................19-64–65, 19-74–75, 19-211
STRUCTURAL
Wrench...........................19-185–186, 19-220
SURVEYORS
Rope......................................................19-57
SUSPENDERS .............................19-79, 19-84
SOLDERING
Gun ..........................................19-18, 19-148
Iron ..................................................19-18–19
SWAGING
Tools.......................................19-113, 19-148
SPADE
Shovel .................................................19-172
SWEEPS
Magnetic..............................................19-109
SPANNER
Socket .................................................19-222
Wrench ................................................19-187
SWIVEL
Cable Pulling..............................19-48, 19-92
Grip ............................................19-89, 19-92
T-SQUARE .............................................19-101
– continues –
19 -H
WWW.HANESSUPPLY.COM
Albany/NE Division:
518.438.0139
Rochester Division:
585.235.0160
FAX:
FAX:
FAX:
716.826.4412
518.438.5343 CCISCO: 843.238.1338
585.235.0229
FAX: 843.238.8337
SECTION INDEX
SECTION 19
Hand Tools
TACKER
Electric ....................................................19-9
Hammer ..................................................19-9
Wire .........................................................19-9
TAMPER
Hand........................................................19-6
TAPER
Drywall ................................................19-100
TAPES
Depth Gauge.........................................19-57
Diameter................................................19-12
Drywall Reel ........................................19-101
Fiberglass ..................................19-12, 19-25
Fishing .................................19-43, 19-77–78
Key Ring................................................19-12
Measuring Wheels ................................19-57
Power Return ...................19-11, 19-169–170
Rule Holders ........................19-79, 19-82–83
Rules ..............19-11–12, 19-25, 19-169–170
Sewer Cleaning ...................................19-156
Surveyors ..............................................19-57
TAPING
Knives....................................................19-99
Ratchet ................................................19-130
Receding .....................................19-133–134
Stands .................................................19-135
Three Way ...........................................19-130
Transporter ..........................................19-133
THREADING
Adapter ..................................19-132, 19-140
Conduit ................................................19-129
Die Heads ...19-129, 19-131, 19-137, 19-140
Dies ..........19-131–132, 19-134, 19-137–140
Drive Bar .............................................19-133
Machines .....................................19-132–140
Manual Threading .......................19-130–132
Nipple Chucks .....................................19-140
Oil ........................................................19-134
Oiler.....................................................19-134
Plastic (PVC) ...19-131, 19-137–138, 19-140
Plastic Coated Pipe ..............19-129, 19-131,
..............................................19-137, 19-140
Power Drives ...............................19-132–134
Ratchet Handles..................................19-130
Stands .................................................19-135
Universal Drive Shaft ..........................19-133
TAPPING
Tool, Pipe ....................................19-143–144
TIE WIRE
Belt ..................................................19-83–84
Twister ...................................................19-99
TAPS
Pipe .....................................................19-129
TIN
Snips .......................................................19-2
TELEPHONE
Circuit Tester .........................................19-52
TONGUE AND GROOVE
PLIERS .................................19-10–11, 19-64
TESTING
Circuit...................................19-52, 19-66–67
Continuity ...................................19-52, 19-66
DC Voltage ............................................19-52
Diode .....................................................19-52
GFCI......................................................19-52
HFE .......................................................19-52
Pipe Pressure......................................19-148
Resistance ............................................19-52
Solenoid Voltage ...................................19-66
Telephone Line......................................19-52
Twin Lead ..............................................19-67
Voltage .................................19-52, 19-66–67
TOOL
Aprons........................................19-29, 19-81
Bags.....................................19-28, 19-84–85
Belts..........................19-29, 19-79, 19-83–84
Boxes .........................19-53–54, 19-177–179
Buckets ................................19-27–29, 19-85
Cabinets.....................19-53–54, 19-177–178
Carts............................................19-177–178
Chests .........................................19-177–179
Organizer.........................................19-27–28
Pickup ................................19-34–35, 19-109
Rebar ....................................................19-86
Rollups ..................................................19-28
Stacker Pockets.....................................19-28
Totes....................................................19-179
THAWING
Pipe Tool..............................................19-149
THERMOMETER ...................................19-111
THICKNESS
Gauge ...................................................19-33
THREAD
Cleaner................................................19-113
Repair File.............................................19-31
Restorers.....................................19-112–113
WWW.HANESSUPPLY.COM
TOOL SETS
Construction Equipment Repair ..........19-181
Industrial Mechanic & Machine Repair19-180
Master Service ....................................19-180
Metric Service Mobile Work Shop.......19-181
TORQUE
Multiplier ..............................................19-206
Wrench .............19-128, 19-206–207, 19-210
TORX
Key Wrench ...........................................19-21
Screwdrivers .........19-68, 19-71, 19-212–213
TOTES
Tools ....................................................19-179
TRACK
Spike Lifter ..............................................19-8
TREE
Pruner ......................................19-29, 19-175
TRIMMER
Grass...................................................19-174
TROWELS
Brick ......................................................19-96
Concrete/Masonry...........................19-96–97
Finishing...................................19-97, 19-100
Gauging.................................................19-96
Margin ...................................................19-96
Nursery................................................19-174
Pointing .................................................19-96
Pool .......................................................19-97
Tuck Pointer...........................................19-96
TUBING
Cutter .............................19-130, 19-144–145
Cutter Wheels......................................19-145
Deburring Tool........................19-129, 19-148
Expander .............................................19-148
TUCK POINT
Trowels ..................................................19-96
TUGGER
Cable ...............................................19-45–46
Sheaves ..........................................19-46–47
TWEEZERS
Industrial................................................19-34
UTILITY
Knife .........................................19-27, 19-169
Knife Blades.............................19-27, 19-169
Knife Holders.........................................19-82
VACUUM
Accessories.................................19-151–152
Industrial Environment ........................19-110
Machine...............................................19-109
Pump Kit..............................................19-109
Shop ....................................................19-110
Wet/Dry ...............................................19-151
VISE-GRIP PLIERS ...................................19-1
VISES
All Weather..........................................19-214
Bench ..........................................19-128–129
Chain ...........................................19-128–129
Combination ........................................19-214
Covers....................................19-149, 19-215
Drill Press Vise....................................19-216
– continues –
19 -I
19
Hand Tools
THREADERS
Bolt.................................19-130, 19-132–140
Carry Case ..........................................19-130
Conduit ................................................19-129
Dies ..........19-131–132, 19-134, 19-137–140
Die Heads ...19-129, 19-131, 19-137, 19-140
Geared ........................................19-133–134
Nipple Chucks .....................................19-140
Oiler.....................................................19-134
Oil-Less ...............................................19-135
Pipe, Manual ...............................19-132–132
Pipe, Powered .............................19-132–140
TOOL, HOLDERS
Bull Pin ..................................................19-83
Cable Splicer Knife................................19-82
Cell Phone .................................19-29, 19-79
Chisel ....................................................19-30
Erection Wrench....................................19-83
Flashlight....................................19-79, 19-82
Hammer .....................................19-79, 19-81
Linesmen’s Knife ...................................19-82
Multi Purpose ........................................19-79
Pliers .....................................................19-82
Pliers & Rule .........................................19-83
Pliers & Screwdriver..............................19-83
Pliers, Rule & Screwdriver ....................19-82
Pocket Knife ..........................................19-82
Punch ....................................................19-30
Scissors.................................................19-82
Scissors & Cable Knife..........................19-82
Snap Loop.............................................19-83
Tape Measure ............................19-79, 19-82
Utility Knife ............................................19-82
Voltage Tester........................................19-82
Albany/NE Division:
518.438.0139
Rochester Division:
585.235.0160
FAX:
FAX:
FAX:
716.826.4412
518.438.5343
585.235.0229
CCISCO: 843.238.1338
FAX:
843.238.8337
SECTION INDEX
SECTION 19
Hand Tools
General Purpose .........................19-149–150
High Visibility .......................................19-215
Jaw Caps ...............................19-149, 19-215
Machine...............................................19-216
Machinists’ ..........................................19-214
Mechanics’ ..........................................19-215
Milling Machine ...................................19-216
Pipe .....................................................19-128
Pipe & Bench ......................................19-214
Tradesmen...........................................19-214
Tri Stand ..............................................19-128
Utility Workshop .....................19-150, 19-215
Welding ...............................................19-128
Wood Working .....................................19-216
Yoke.....................................................19-128
VOLTAGE
Tester ...................................19-52, 19-66–67
Tester Holder.........................................19-82
WALL COVERING
Cutters.................................................19-177
Stripper................................................19-177
Tools ....................................................19-177
WAND
Magnetic..............................................19-109
WEDGES
Setup ...................................................19-208
Wood Splitting .........................................19-5
WELDING
Clamp Pliers............................................19-1
Clamps ...............19-1–2, 19-56, 19-106–109
Electrode Bag........................................19-85
Flange Pins ...........................................19-56
Heat Measuring Tools .........................19-111
Magnetic Square .................................19-109
Pipe End Prep Lathes ...........................19-56
Vise .....................................................19-128
WHEELBARROWS........................19-170–171
WIGGLER/CENTER FINDER..................19-32
WIRE
Caddies ...........................................19-48–49
Carts......................................................19-48
Crimper.....................19-50–51, 19-65, 19-75
Cutting Pliers.........................................19-11
Dispenser ..............................................19-49
End Caps, Insulated............................19-213
Gauge ...................................................19-33
Stands ...................................................19-49
Strippers ...........19-64–65, 19-74–75, 19-211
WIRE ROPE
Cutter, Hydraulic..................................19-105
Cutter, Impact......................................19-105
Grips................................................19-87–95
Shears, Insulated .....................19-17, 19-212
WOOD
Boring Tools.....................................19-41–42
Splitting Wedges .....................................19-5
Workers Clamp............................19-111–112
Workers Vise .......................................19-216
WORK
Belt ...........................19-29, 19-79, 19-83–84
Belt Suspenders ........................19-79, 19-84
WORK BENCH
Mobile....................................................19-54
Fold .....................................................19-101
WORKSITE
Storage Boxes.................................19-53–54
YOKE
Vises ...................................................19-128
Hand Tools
19
19 -J
WRENCHES
Adjustable ..............................19-185, 19-224
Adjustable Construction .............19-185–186,
...........................................................19-220
Basin ...................................................19-126
Bell System ...........................................19-67
Box ..............................................19-184–185
Chain...........................................19-125, 207
Chain Pipe Tong ..................................19-207
Combination...................19-181–182, 19-219
Construction .......19-67, 19-185–186, 19-220
Crow Foot....................................19-219–220
Engineers’ Pipe ...................................19-220
Erection .............19- 67, 19-185–186, 19-220
Flare Nut .............................................19-185
Hex ......................................................19-126
Hex Key ...........................................19-20–22
Insulated......................................19-208–210
Internal ................................................19-126
Linemen ................................................19-67
Locking ....................................................19-1
Metric .............................19-182, 19-184–187
Open End ....................................19-183–184
Pipe ..................19-125–126, 19-129, 19-220
Ratcheting box ....................................19-184
Soil Pipe ..............................................19-128
Spanner...............................................19-187
Spud ...................19-67, 19-185–186, 19-220
Spud, Pipe...........................................19-126
Strap ...........................19-68, 19-126, 19-129
Striking Face ..........19-119–121, 19-186–187
Structural ............19-67, 19-185–186, 19-220
Three in One .......................................19-220
Torque ............................19-206–207, 19-210
Torque, Soil Pipe .................................19-128
WWW.HANESSUPPLY.COM
Albany/NE Division:
518.438.0139
Rochester Division:
585.235.0160
FAX:
FAX:
FAX:
716.826.4412
518.438.5343 CCISCO: 843.238.1338
585.235.0229
FAX: 843.238.8337
Hand Tools
American Tool
®
Vise-Grip® Locking Clamps
American Tool®
LOCKING TOOLS
Vise-Grip® Locking Pliers
• Used for turning, cutting,
tightening, clamping & twisting
• High-grade alloy steels heat
treated for max. toughness and
durability.
• Hardened tooth design grips
from any angle
• Turn adjusting screw to fit work
and squeeze handle w/one
hand to lock on w/tremendous
pressure.
• Stays adjusted for repetitive use.
• Guarded release trigger quickly
unlocks
DescSize Jaw Adj. Carded Boxed
ription
(in)
(in)
Stock # Stock #
Curved Jaw Locking Pliers w/ Wire Cutter
10WR®
10 0 - 1-7/8
–
05
10WR®-3 10 0 - 1-7/8 0502L3
–
7WR®
7 0 - 1-5/8
–
07
7WR®-3
7 0 - 1-5/8 0702L3
–
5WR®
5 0 - 1-1/4
–
09
®
5WR -3
5 0 - 1-1/4 0902L3
4WR
4 0 - 15/16
–
10
4WR-3
4 0 - 15/16 1002L3
–
Curved Jaw Locking Pliers
10CR®
10 0 - 1-7/8
–
11
10CR®-3 10 0 - 1-7/8 1102L3
–
®
7CR
7 0 - 1-5/8
–
13
®
7CR -3
7 0 - 1-5/8 1302L3
–
Straight Jaw Locking Pliers
10R®
10 0 - 1-5/8
01
10R®-3
10 0 - 1-5/8 0102L3
®
7R
7 0 - 1-1/8
03
7R®-3
7 0 - 1-1/8 0302L3
Long Nose Locking Pliers
9LN®
9 0 - 2-7/8
–
15
9LN®-3
9 0 - 2-7/8 1502L3
–
6LN®
6 0 - 2-1/4
–
14
®
6LN -3
6 0 - 2-1/4 1402L3
–
4LN
4 0 - 1-5/8
–
16
4LN-3
4 0 - 1-5/8 1602L3
–
Bent Nose Locking Pliers
9BN
9 0 - 2-7/8
–
154
9BN-3
9 0 - 2-7/8 01542L3
–
6BN
6 0 - 2-1/4
–
144
6BN-3
6 0 - 2-1/4 01442L3
–
4BN
4 0 - 1-5/8
–
164
4BN-3
4 0 - 1-5/8 01642L3
–
Large Jaw Locking Pliers
12LC
12 0 - 3-1/8
–
12
12LC-3
12 0 - 3-1/8
12L3
–
Curved Jaw Locking Pliers w/ Wire
Cutter
- Convenient wire cutter cuts up to a 1/4"
bolt.
- Involute jaw curve permits user to put
tremendous pressure on four points of
any style nut or bolt head.
Curved Jaw Locking Pliers
- Involute jaw curve permits user to put
tremendous pressure on four points of
any style nut or bolt head.
Straight Jaw Locking Pliers
- Straight jaws allow for maximum contract
on flat, square or hex work.
- Very popular in welding & other metal
work.
- Use for safer grinding or as a portable
vise.
Long Nose Locking Pliers
- Convenient wire cutter cuts up to a 1/4"
bolt.
- Long, straight nose allows for use in
narrow spaces not reachable by curved
or straight jaws.
- Use to clamp or tighten bolts or extract
items in hard-to-reach places.
Bent Nose Locking Pliers
- Bent jaws provide off-angle access to
tight places and allow for a better line
of sight.
- Useful in automotive and electronic
applications.
Large Jaw Locking Pliers
- Heavy-duty jaw grips around work
of all shapes.
- 3-1/8" maximum jaw opening.
- Ideal for plumbers, mechanics,
welders and others who work with
large objects.
Locking Wrenches
Wrench Size
Range (in)
5/8 to 1-1/8
7/16 to 3/4
1/4 to 9/16
Carded
Stock #
02
04
08
- Locks work with the squeeze of one hand.
- High-grade alloy steels heat treated for
maximum toughness and durability.
Locking Clamps with Swivel Pads
- Swivel pads for holding without damaging
work surface.
Locking Bar Clamp
- Moveable jaw slides
open to extend clamping
capabilities.
- Easy locking and quick
release action.
*Extended Throat Width
Locking Hold Down Clamp
- Self-leveling swivel tip helps hold-tapered
work, irregular-shaped jobs and delicate
objects.
- Clamps items securely to most drilling
tables and workbenches.
Vise-Grip® Locking Specialty Tools:
Locking Welding Clamp
Desc- Size Jaw Width Throat Boxed
ription (in)
(in)
Depth (in) Stock #
9R®
9
2-3/4
1-5/8
25
- U-shaped jaws for visibility and working
space.
- Holds work in proper alignment.
Locking Sheet Metal Tool
Desc- Size Jaw Width Throat Boxed
ription (in)
(in)
Depth (in) Stock #
8R®
8
3-1/8
1-3/4
23
- Locks to work, eliminates hand gripping.
- Makes bending, forming and crimping
jobs easier.
Locking Panel Clamp
Desc- Size Jaw Open. Throat Boxed
ription (in)
(in)
Depth (in) Stock #
9AC
9
3/8
7/32
251
- Provides quick clamping and alignment
of auto body panels.
- Bottom jaw slides in straight line motion.
Desc- Size
ription (in)
20R®
9
Chain
Lgth. (in)
18
19
Boxed
Stock #
27
- Holds and locks around any shape,
any size.
- 18" chain, extension chain available.
Locking Pinch-Off Tool
Desc- Size Jaw Thkns. Throat Boxed
ription (in)
(in)
Depth (in) Stock #
RR®
7
1/4
1
29
WWW.HANESSUPPLY.COM
- Pinches off and locks on tubing.
- Leaves both hands free to do other work.
19 -1
Hand Tools
Size
(in)
10
7
4
Desc- Size Jaw Adj.
Throat Carded
ription (in)
(in)
Depth (in) Stock #
Locking Clamps w/Regular Tips
6R®
6
0-2
1-1/2
17
11R®
11
0-4
2-5/8
19
18R®
18
0-8
9-1/2
21
18DR* 18
0-8
9-1/2
211
24R
24 0 - 12-1/2
15-1/2
275
Locking Clamps w/Swivel Pads
4SP
4 0 - 1-5/8
1-1/4
165
6SP
6 0 - 2-1/8
1-1/2
18
11SP
11
0-4
2-5/8
20
18SP
18
0-8
9-1/2
22
24SP
24
0 - 10
15-1/2
28
Locking Bar Clamps
310S
10
0 - 10
18
226
Locking Hold Down Clamp
11HD
11 0 - 3-3/4
2-1/2
24
Locking Clamps w/Regular Tips
Locking Chain Clamp
• Heavy-Duty Jaw - Will twist fastener before breaking.
• Wire cutter
• Adjustable to Over 16 Wrench Sizes.
• Jaws Lock onto Three Sides - will not slip or mar.
• High Grade Alloy Steel - Heat treated for maximum toughness.
• Guarded Release Trigger - For quick opening.
• Adjusting Screw - For changing size and pressure.
Description
10LW TM
7LW TM
4LW TM
• Wide-opening jaws provide
greater versatility in clamping a
wide variety of shapes.
• Powerful Locking Mechanism
• Adjusting Screw Gives Exacting
Pressure:
- Simply turn the adjustment
screw to change jaw opening
and clamping pressure.
- Stays adjusted for repetitive use.
• Guarded release trigger quickly
unlocks.
Albany/NE Division:
518.438.0139
Rochester Division:
585.235.0160
FAX:
FAX:
FAX:
716.826.4412
518.438.5343
585.235.0229
CCISCO: 843.238.1338
FAX:
843.238.8337
Hand Tools
American Tool®
CLAMPING TOOLS
Prosnip™ Aviation Snips, Compound Leverage (continued)
Quick-Grip® Clamping Tools Clamps
• High-tech resin material - adds durability to the clamp, yet maintains its
lightweight feature
• Non-marring, soft pliable pads - works well w/delicate or finished materials
• Heat-Treated bar - results in a stronger bar which resists flexing, even
when the clamp is tightened to its fullest
• Quick-ReleaseTM Trigger
• Pistol Grip
Bar Clamps
Standard Bar Clamps
- Provides quick and easy onehanded clamping.
- Can't over tighten.
Max. Jaw
Throat
Opening
Depth
Stock
Cap (in) Cap. (in) No.
Standard Bar Clamps
6
3-1/4
506
12
3-1/4
512
18
3-1/4
518
24
3-1/4
524
36
3-1/4
536
50
3-1/4
550
Mini Bar Clamps
6
2-7/16
546
6" / 2-Pack
5462
12"
2-7/16
5412
12" / 2-Pack
54122
27.5
Mini Bar Clamps
- 25% smaller than standard
QUICK-GRIP bar clamp.
- Ideal for smaller projects.
- Excellent for working in confined spaces.
500
20SL
20SR
Description
20SL - Straight and Angles
or Curves Left
20SR - Cuts Straight and Angles
or Curves Right
Welding Clamps
- Jaws constructed
from heat-treated carbon steel for greater
(Quick-Grip® Specialty Clamp)
heat dissipation.
- Copper plated pads make
Max. Jaw
Throat
jaws resistant to welding
Opening
Depth
Stock
splatter.
Cap (in) Cap. (in) No.
- Special horizontal and vertical groove design allows for
6
3-1/4
5906
clamping a variety of materials and shapes.
18
3-1/4
5918
- One jaw swivels to assist in holding round stock.
Quick-Grip® Spring Clamps
• Non-slip handles
- Designed for comfortable hand span
- Incorporated into the handle are grooves to prevent slipping for quickest
clamping possible
• The Jaws are configured to hold odd-shaped work pieces
• Jaws open to complete parallel position
• Hightech resin material - made of durable
glass-reinforced nylon
Max. Jaw
affording lightweight
Opening
Stock
durability.
Cap. (in)
No.
• Non-Marring, Soft, Pliable
1
58100
Removable Pads 2
58200
protects work pieces.
3
58300
SNIPS
ProsnipTM Aviation Snips, Compound Leverage
Hand Tools
Max. Cutting Cap.
Size Lgth. of Grip Cold-Roll Stainless Carded
(in) Cut (in) Color
Steel
Steel
Stock #
10
1-3/16 Yellow 18 ga
N/A
21004
ProsnipTM Offset Snips, Compound Leverage
Spreader
Welding Clamps
19
ProsnipTM Utility
Snips, Compound
Leverage
Description
104 Cuts Straight and Curves
- Convenient one-handed applicaSpreader
tion and features of traditional
®
QUICK-GRIP® bar clamp.
(Quick-Grip Specialty Clamp)
- Provides controlled outward
Max. Jaw
Throat
pressure facilitating disassemOpening
Depth
Stock
bly without need for striking surCap (in) Cap. (in) No.
faces.
7-1/4
Max. Cutting Cap.
Description
(in) Cut (in) Color
Steel
Steel
Stock #
101 - Cuts Left and Straight
10
1-3/16 Red
18 ga
22 ga
21001
102 - Cuts Right and Straight
10
1-3/16 Green
18 ga
22 ga
21002
103 - Cuts Straight and Wide Curves 10
1-3/16 Yellow 18 ga
22 ga
21003
105 - Bulldog Snip, Notch and Trim
9
3/4
Red
16 ga
18 ga
21005
Max. Cutting Cap.
(in) Cut (in) Color
Steel
Steel
Stock #
9-1/2 1-3/16 Red
18 ga
N/A
20001
9-1/2 1-3/16
Green
102
103
101
010
210
Description
007 Cuts Straight and Wide Curves
207 Cuts Straight and Tight Curves
Max. Cutting Cap.
Size Cold-Roll Stainless
(in)
Steel
Steel
7
24 ga
28 ga
10
22 ga
26 ga
12-3/4
20 ga
22 ga
7
26 ga
28 ga
10
24 ga
26 ga
12-3/4
22 ga
24 ga
Carded
Stock #
22007
22010
22012
23007
23010
23012
HAND SAWS
JackproTM Hand Saws
Hard Wood Handle - Hard Point Teeth
Description
15" - 8P-Aggressive Teeth
20" - 8P-Aggressive Teeth
20" - 10P-Universal Teeth
26" - 8P-Universal Teeth
14" - 12P-Back Saw
12" - 12P-Compass Saw
Description
10" - Dovetail Saw
6" - Wallboard Saw
6" - Coping Saw
– continues –
19 -2
N/A
ProsnipTM Tinner Snips
Stock #
766PHP-375
766PHP-500
788UHP-500
788UHP-650
7136HP-350
7126HP-300
766PHP-500
Specialty Saws
105
18 ga
WWW.HANESSUPPLY.COM
Stock #
13J
106-150
108-150
108-150
20002
Albany/NE Division:
518.438.0139
Rochester Division:
585.235.0160
FAX:
FAX:
FAX:
716.826.4412
518.438.5343 CCISCO: 843.238.1338
585.235.0229
FAX: 843.238.8337
Hand Tools
American Tool
®
Pruning Saws
Metric, Self-Starting - Titanium Nitride
Coated Multiple Hole Sizes
• Designed for cutting on the pull stroke.
Description
Stock #
13-1/2" - Straight-with Hard Point Teeth 142HP-343
13" - Curved
172P-330
172P-330
Bow Saws
• Hard pointed teeth.
Description
21"
24"
30"
36"
Stock #
157-24HP-533
224HP-610
224HP-762
224HP-914
157-24HP-533
Metric, Self - Starting - Single Hole Sizes
STEP DRILLS & CARBIDE HOLE CUTTERS
UNIBIT® Step Drills:
Style
No.
12M
Hole Size
(mm)
8
KO
Size
N/A
Shank
Size (in)
1/4
Carded
Stock #
11312
Metric, Hole-Enlarging
Fractional, Self-Starting Multiple Hole Sizes
Style No. of
No. Holes
1
13
2
6
3
9
4
12
5
10
Style No. of
Hole
Increments Shank Max. Mat'l Carded
No. Holes Sizes (mm)
(mm)
Size (in) Thkns (in) Stock #
1MT
9
4 - 12
1
1/4
5
16101
2MT
5
4 - 12
2
1/4
11
16102
3MT
7
6 - 18
2
3/8
5
16103
4MT
10
4 - 22
2
3/8
5
16104
5MT
13
5 - 35
2-3
1/2
3.5
16105
Style No. of
Hole
(mm)
20M
6
14 - 24
2
1/2
5
11580
21M
8
20 - 34
2
1/2
5
11581
Hole
Sizes (in)
(in)
1/8 - 1/2
1/32
1/4
1/8
10231
3/16 - 1/2
1/16
1/4
3/8
10232
1/4 - 3/4
1/16
3/8
1/8
10233
3/16 - 7/8
1/16
3/8
1/8
10234
1/4 - 1-3/8
1/8
1/2
1/8
10235
UNIBIT ® Carbide Hole Cutters
• Carbide Cutting Edge - Cuts cleanly, without hogging, chattering or
vibration, for true, round holes in materials up to 10 gauge.
• 3 Flatted Shank - Provides for a more secure chuck hold than available
on most other hole cutters.
• 135-degree Split Point - Helps ensure a true start with no walking; no
center punching is required. 3/16" pilot drill is double ended for long life.
• Hardened Carbon Steel Body - For long life and tool durability.
• Designed to make holes in thin material, less than 1/8".
• Available in 18 sizes from 3/4" to 2-1/2".
• Turned from solid steel, not welded.
• Carbide tip brazed to hardened steel body.
• Makes clean, round holes.
• Ideal for use with: stainless steel, mild steel, copper, brass, aluminum,
plexiglass, fiberglass and laminates.
Fractional, Self-Starting Titanium Nitride Coated Multiple Hole Sizes
Style No. of
Hole
No. Holes Sizes (in)
(in)
1T
13
1/8 - 1/2
1/32
1/4
1/8
15101
2T
6
3/16 - 1/2
1/16
1/4
3/8
15102
3T
9
1/4 - 3/4
1/16
3/8
1/8
15103
4T
12
3/16 - 7/8
1/6
3/8
1/8
15104
Fractional, Self-Starting-Single Hole Sizes
Style
Hole
KO
Shank Carded
No. Sizes (in)
Size
Size (in) Stock #
10
1/2
N/A
1/4
10310
11
7/8
1/2"
3/8
10311
12
3/8
N/A
1/4
10312
13
1-1/8
3/4"
1/2
10313
14
1-7/32 Oil tight switches
1/2
10314
Fractional, Hole Enlarging-Multiple
Hole Sizes
Style No. of
Hole
No. Holes Sizes (in)
(in)
20
8
9/16 - 1
1/16
1/2
1/8
10220
21
10 13/16 - 1-3/8
1/16
1/2
1/8
10221
Style
Hole
KO
Shank
No. Sizes (in)
Size
Size (in)
329
3/4
PG11
3/8
331
13/16
PG13
3/8
332
7/8
1/2", PG16
3/8
335
1
N/A
3/8
337
1-1/16
N/A
3/8
338
1-1/8
3/4",PG21
1/2
340
1-7/32 Oil Tight Switches
1/2
341
1-1/4
N/A
1/2
342
1-5/16
N/A
1/2
344
1-3/8
1"
1/2
346
1-7/16
PG29
1/2
347
1-1/2
N/A
1/2
353
1-3/4
1-1/4"
1/2
359
2
1-1/2"
1/2
362
2-1/8
Locksmith,PG42
1/2
365
2-1/4
N/A
1/2
368
2-3/8
2",PG48
1/2
371
2-1/2
N/A
1/2
Carded
Stock #
10329
10331
10332
10335
10337
10338
10340
10341
10342
10344
10346
10347
10353
10359
10362
10365
10368
10371
19
Hand Tools
Metric, Self-Starting Multiple Hole Sizes
Style No. of
Hole
(mm)
1M
9
4 - 12
1
1/4
5
11101
2M
5
4 - 12
2
1/4
11
11102
3M
7
6 - 18
2
3/8
5
11103
4M
10
4 - 22
2
3/8
5
11104
5M
13
5 - 35
2-3
1/2
3.5
11105
WWW.HANESSUPPLY.COM
19 -3
Albany/NE Division:
518.438.0139
Rochester Division:
585.235.0160
FAX:
FAX:
FAX:
716.826.4412
518.438.5343
585.235.0229
CCISCO: 843.238.1338
FAX:
843.238.8337
Hand Tools
Ames®
Double Face Sledge Hammer Repair Handles
Ames®
HAMMERS & SLEDGES
Hand Drill Hammers
Used with chisels, punches, star
drills and hardened nails. Their
design permits heavy blows with
limited swing.
Product Head Wt.
No.
(lbs)
1100800
2
1101300
3
1101800
4
1101400
3
Handle
Lgth. (in)
10-1/2 Hickory
10-1/2 Hickory
10-1/2 Hickory
10-1/2 FiberPro®
FiberPro®
Handle
Hickory
Handle
Eye Size
(in)
3/4” x 1”
3/4” x 1”
3/4” x 1”
3/4” x 1”
Repair
Handle
11420
11420
11420
11419
UPC
Pack
Pack
No.
Qty. Wt. (lbs)
0 49206 11008 3
2
4.20
0 49206 11013 7
2
6.00
0 49206 11018 2
2
8.40
0 49206 11014 4
2
6.40
Pack
Cube
0.100
0.100
0.100
0.100
Hand Drill Hammer Repair Handles
Product
Handle
Fits
UPC
No.
Lgth (in)
(lbs)
No.
1142000 10-1/2" Hickory 2 - 4 0 49206 11420 3
1141900 10-1/2" FiberPro® 2 - 4 0 49206 11419 7
Product
No.
1142300
1140100
1140300
1140500
1140700
1142200
1140000
1140600
Handle
Lgth (in)
16" Hickory
36" Hickory
32" Hickory
16" Hickory
36" Hickory
16" FiberPro®
36" FiberPro®
36" FiberPro®
Fits
(lbs)
2-4
6 - 16
6 - 16
6 - 16
20
2-4
6 - 12
20
UPC
No.
0 49206 11423 4
0 49206 11401 2
0 49206 11403 6
0 49206 11405 0
0 49206 11407 4
0 49206 11422 7
0 49206 11400 5
0 49206 11406 7
Pack
Qty.
12
12
12
12
12
12
12
12
Pack
Pack
Wt. (lbs) Cube
6.00
0.500
18.00
1.600
18.00
1.500
6.00
0.500
18.00
1.200
6.00
0.500
9.00
0.600
18.00
1.200
AXES
Axes are used to trim branches, prune trees, split and cut wood. Single
bit axes can also be used to drive wood stakes with the face.
Half Hatchet
Pack
Qty.
12
12
Pack
Pack
Wt. (lbs) Cube
3.00
0.300
3.00
0.300
Product
Head
Handle Repair
UPC
Pack Pack
Pack
No.
Wt.(lbs) Lgth. (in) Handle
No.
Qty. Wt. (lbs) Cube
1125800
1-1/2 14" Hickory 11414 0 49206 11258 2 6
12.60 0.100
Cross Peen Hammers
The striking face is designed for
general blacksmith work in striking
unhardened metal.
The peens are used for shaping
(fullering) and bending unhardened
metal.
Product
No.
Head Wt.
(lbs)
Handle
Lgth. (in)
1102400
1102900
1103400
1104200
1103500
2
2-1/2
3
4
3
16" Hickory
16" Hickory
16" Hickory
16" Hickory
16" FiberPro®
Hickory
Handle
Eye Size Repair
(in)
Handle
3/4 x 1
3/4 x 1
3/4 x 1
3/4 x 1
3/4 x 1
11423
11423
11423
11423
11422
FiberPro®
Handle
UPC
No.
Pack
Pack
Pack
Qty. Wt. (lbs) Cube
0 49206 11024 3
0 49206 11029 8
0 49206 11034 2
0 49206 11042 7
0 49206 11035 9
2
2
2
2
2
5.20
5.40
6.60
9.20
6.60
0.100
0.100
0.100
0.100
0.100
Product
No.
1141400
Handle
Lgth (in)
16" Hickory
16" FiberPro®
Fits
UPC
(lbs)
No.
2 – 4 0 49206 11423 4
2 – 4 0 49206 11422 7
Pack
Qty.
12
12
Pack
Pack
Wt. (lbs) Cube
6.00
0.500
6.00
0.500
Hand Tools
19
Product Head
Handle
Eye Size
No.
Wt.(lbs)
Lgth. (in)
(in)
1104900
2
16" Hickory
3/4 x 1
1105300 2-1/2
16" Hickory
3/4 x 1
1106200
3
16" Hickory
3/4 x 1
1107000
4
16" Hickory
3/4 x 1
1107100
4
32" Hickory
3/4 x 1
1108200
6
30"/36" Hickory
1 x 1-3/8
1108300
6
26" Hickory
1 x 1-3/8
1108400
6
16" Hickory
1 x 1-3/8
1109900
8
32"/36" Hickory
1 x 1-3/8
1110000
8
16" Hickory
1 x 1-3/8
1120300
10
32"/36" Hickory
1 x 1-3/8
1121900
12
32"/36" Hickory
1 x 1-3/8
1123400
16
36" Hickory
1 x 1-3/8
1123500
16
28" Hickory
1 x 1-3/8
1124400
20
36" Hickory 1-1/4 x 1-1/2
®
3/4 x 1
1105000
2
16" FiberPro
3/4 x 1
1105400 2-1/2
16" FiberPro®
3/4 x 1
1106300
3
16" FiberPro®
®
1107200
4
16" FiberPro
3/4 x 1
1108500
6
33-1/2" FiberPro® 1 x 1-3/8
1110100
8
33-1/2" FiberPro® 1 x 1-3/8
1120400
10
33-1/2" FiberPro® 1 x 1-3/8
1 x 1-3/8
1122000
12
34" FiberPro®
1 x 1-3/8
1123600
16
34" FiberPro®
Product Head
Handle
No. Wt.(lbs) Lgth. (in)
1125300 1-1/4 14" Hickory
1125400 1-1/4 14" FiberPro®
19 -4
UPC
No.
0 49206 11414 2
Pack
Qt.
6
Pack
Wt. (lbs)
3.00
Repair
UPC
Pack Pack
Handle
No.
Qty. Wt. (lbs)
11412 0 49206 11253 7 6
12.00
11411 0 49206 11254 4 6
12.00
Pack
Cube
0.300
Pack
Cube
0.200
0.200
FiberPro®
Handle
Hickory
Handle
Product
No.
1141200
1141100
Hickory
Handle
Handle
Lgth. (in)
14" Hickory
14" FiberPro®
Fits
(lbs)
1-1/4
1-1/4
UPC
No.
0 49206 11412 8
0 49206 11411 1
Pack
Qt.
12
12
Pack
Wt. (lbs)
6.00
6.00
Pack
Cube
0.500
0.500
Miner’s Axe
FiberPro®
Handle
Repair
Handle
11423
11423
11423
11423
–
11401
–
11405
11401
11405
11401
11401
11401
–
11407
11422
11422
11422
11422
11400
11400
11400
11400
11400
Fits
(lbs)
1-1/2
Camp/Hunter Axes Repair Handle
Double Face Sledge Hammers
Used for general sledging operations
in striking wood, concrete, metal and
stone. Common Uses are drifting
timbers and striking spikes, cold
chisels, star drills and hardened nails.
Handle
Lgth. (in)
14" Hickory
Single Bit Camp/Hunter Axes
Engineer/Cross Peen Hammer Repair Handles
Product
No.
1142300
1142200
Hickory
Handle
Half Hatchet Repair Handle
UPC
Pack Pack
No.
Qty. Wt. (lbs)
0 49206 11049 6
2
4.00
0 49206 11053 3
2
5.80
0 49206 11062 5
2
6.80
0 49206 11070 0
6
27.00
0 49206 11071 7
6
30.00
0 49206 11082 3
6
42.00
0 49206 11083 0
6
39.00
0 49206 11084 7
6
37.80
0 49206 11099 1
6
55.20
0 49206 11100 4
6
49.20
0 49206 11203 2
2
23.80
0 49206 11219 3
2
26.20
0 49206 11234 6
2
34.40
0 49206 11235 3
2
34.40
0 49206 11244 5
2
42.60
0 49206 11050 2
2
4.00
0 49206 11054 0
2
6.00
0 49206 11063 2
2
7.00
0 49206 11072 4
6
28.20
0 49206 11085 4
6
46.20
0 49206 11101 1
6
58.80
0 49206 11204 9
2
24.00
0 49206 11220 9
2
27.60
0 49206 11236 0
2
35.80
Pack
Cube
0.100
0.100
0.100
0.600
0.600
0.800
0.800
0.700
0.900
0.600
0.400
0.400
0.400
0.400
1.600
0.100
0.100
0.100
0.600
0.800
0.900
0.400
0.400
0.400
Product
No.
1128500
1128600
Head
Handle Repair
UPC
Pack Pack
Wt.(lbs) Lgth. (in) Handle
No.
Qty. Wt. (lbs)
3-1/2 20" Hickory 11758 0 49206 11285 8 6
30.00
3-1/2 26" Hickory
0 49206 11286 5 6
30.00
Pack
Cube
0.600
0.600
Miner’s Axe Repair Handle
Product
No.
1175800
Handle
Lgth. (in)
20" Hickory
Fits
(lbs)
3-1/2
UPC
No.
0 49206 11758 7
Pack
Qt.
12
Pack
Wt. (lbs)
8.00
Pack
Cube
0.400
Boy’s Axe
Product Head
Handle
Repair
UPC
Pack Pack
Pack
No. Wt. (lbs) Lgth. (in) Handle
No.
Qty. Wt. (lbs) Cube
1127800 2-1/4 28" Hickory 11448 0 49206 11278 0 6
21.00 0.500
Boy’s Axe Repair Handle
Hickory
Handle
Product
No.
1144800
1144700
Handle
Fits
Lgth. (in)
(lbs)
28" Hickory 2-1/4
28" FiberPro® 2-1/4
WWW.HANESSUPPLY.COM
UPC
No.
0 49206 11448 7
0 49206 11447 0
Pack
Qt.
12
12
Pack
Wt. (lbs)
15.00
15.00
Pack
Cube
1.200
1.200
Albany/NE Division:
518.438.0139
Rochester Division:
585.235.0160
FAX:
FAX:
FAX:
716.826.4412
518.438.5343 CCISCO: 843.238.1338
585.235.0229
FAX: 843.238.8337
Hand Tools
Ames
®
Single Bit Michigan Axes
Product Head
Handle
No. Wt. (lbs) Lgth. (in)
1126400 3-1/2 36" Hickory
1126500 3-1/2 36" FiberPro®
Sledge Eye Woodsplitters
Repair
UPC
Pack Pack
Handle
No.
Qty. Wt. (lbs)
11442 0 49206 11264 3 6
28.80
11441 0 49206 11265 0 6
34.20
Pack
Cube
0.700
0.700
FiberPro®
Handle
Hickory
Handle
Used for splitting wood in conjunction with woodsplitting wedges by first
making a notch with the splitting edge and then driving the wedge with
the maul's striking face.
Product Head
No.
Wt. (lbs)
1129300
6
1129700
8
1129400
6
1129800
8
Handle
Lgth.(in)
36" Hickory
36" Hickory
36" FiberPro®
36" FiberPro®
Eye
Size (in)
1 x 1-3/8
1 x 1-3/8
1 x 1-3/8
1 x 1-3/8
Premium Single Bit Michigan Axes
Repair
Handle
11401
11401
11400
11400
IUPC
Pack Pack
No.
Qty. Wt. (lbs)
0 49206 11293 3 6
44.40
0 49206 11297 1 6
60.60
0 49206 11294 0 6
48.00
0 49206 11298 8 6
61.80
Pack
Cube
1.100
1.200
1.100
1.200
FiberPro®
Handle
Hickory
Handle
Product Head
Handle
Repair
UPC
Pack Pack
Pack
No.
Qty. Wt. (lbs) Cube
1126800 3-1/2 36" Hickory 11442 0 49206 11268 1 6
27.00 0.700
Hickory
Handle
Single Bit Michigan Axe Repair Handle
Product
Handle
No.
Lgth. (in)
1144200 36" Hickory
1144100 36" FiberPro®
Fits
UPC
Pack Pack
(lbs)
No.
Qt. Wt. (lbs)
3 - 5 0 49206 11442 5 12
18.00
3 - 5 0 49206 11441 8 12
18.00
Pack
Cube
1.200
1.200
Sledge Eye Woodsplitter Repair Handles
Product
Handle
No.
Lgth.(in)
1140100 36" Hickory
1140000 36" FiberPro®
Fits
(lbs)
6-8
6-8
UPC
No.
0 49206 11401 2
0 49206 11400 5
Pack
Qty.
12
12
Pack
Wt.(lbs)
18.00
9.00
Pack
Cube
1.600
0.600
Square-Head Woodsplitting
Wedges
Used for splitting wood.
Double Bit Michigan Axes
Product Head
Handle
Repair
UPC
Pack Pack
Pack
No.
Qty. Wt. (lbs) Cube
1127300 3-1/2 36" Hickory 11445 0 49206 11273 5 6
31.20 0.800
Hickory
Handle
Product
Net
No.
Wt. (lbs)
1131900
3
1132200
4
1132600
5
1132900
6
Lgth.
(in)
7-1/2
8-1/4
9-1/4
9-1/2
Head
(in)
1-1/2
1-5/8
1-3/4
1-7/8
UPC
No.
0 49206 11319 0
0 49206 11322 0
0 49206 11326 8
0 49206 11329 9
Pack
Pack
Qty. Wt. (lbs)
10
29.00
10
39.00
10
49.00
10
60.00
Premium Double Bit Michigan Axes
MATTOCKS, PICKS & TAMPERS
Product Head
Handle
Repair
UPC
Pack Pack
Pack
No.
Qty. Wt. (lbs) Cube
1127500 3-1/2 36" Hickory 11445 0 49206 11275 9 6
31.20 0.800
Cutter Mattocks with Handles
Hickory
Handle
Double Bit Michigan Axe Repair Handle
Product
Handle
No.
Lgth. (in)
1144500 36" Hickory
1144400 36" FiberPro®
Fits
UPC
Pack Pack
(lbs)
No.
Qt. Wt. (lbs)
3 - 5 0 49206 11445 6 12
18.00
3 - 5 0 49206 11444 9 12
18.00
Pack
Cube
1.200
1.200
Pack
Cube
0.300
0.300
0.400
0.500
Used to dig or grub into the earth. The cutter blade is particularly
adaptable when digging around bushes and shrubs, and when it is
necessary to cut roots.
Product
Head
Handle
Eye Repair
UPC
Pack
Pack
No.
Wt. (lbs)
Lgth.(in)
Size Handle
No.
Qty. Wt. (lbs)
1135000
5
36" Hickory
6
11436 0 49206 11350 3 6
46.80
1135200*
5
36" FiberPro® 6
11435 0 49206 11352 7 6
49.80
Pack
Cube
3.400
1.400
*Head and handle packed separately.
FiberPro®
Handle
Hickory
Handle
WOOD SPLITTERS & WEDGES
Cutter Mattocks Repair Handles
Super Splitter
Woodsplitters
The ultimate woodsplitting tools provide more
splitting power with less
weight, reducing fatigue.
Product Head
No.
Wt. (lbs)
1156300
2
1156200
4
1156100
2
1156000
4
Handle
Lgth. (in)
28" Hickory
36" Hickory
28" FiberPro®
36" FiberPro®
Product
No.
FiberPro®
Handle
Hickory
Handle
UPC
Pack
Pack
No.
Qty. Wt. (lbs)
0 49206 11563 7
2
7.00
0 49206 11562 0
2
10.00
0 49206 11561 3
2
8.00
0 49206 11560 6
2
12.00
Pack
Cube
.290
.630
.290
.630
Handle
Lgth.(in)
Fits
(lbs., eye)
UPC
No.
1143600 36" Hickory 5 - 7 lbs., 6 eye 0 49206 11436 4
1143500 36" FiberPro® 5 - 7 lbs., 6 eye 0 49206 11435 7
Pack
Qty.
12
12
Pack
Pack
Wt. (lbs) Cube
30.00
36.00
1.400
1.400
Pick Mattocks
Used to dig or grub into the earth and for digging in packed earth or clay.
It may be necessary to loosen the clay or earth with pick and dig out with
mattock end.
Handle
Lgth. (in)
36" Hickory
36" Hickory
Eye
Size
6
6
Repair
UPC
Pack
Pack
Handle
No.
Qty. Wt. (lbs)
11436 0 49206 11361 9 6
43.80
11436 0 49206 11362 6 6
43.80
Pack
Cube
3.400
1.400
*Head and handle packed separately.
Hickory
Handle
Pick Mattocks Repair Handles
Product
Handle
Fits
UPC
Pack
No.
Lgth. (in)
(lbs., eye)
No.
Qty.
1143600 36" Hickory 5 - 7 lbs., 6 eye 0 49206 11436 4 12
1143500 36" FiberPro® 5 - 7 lbs., 6 eye 0 49206 11435 7 12
WWW.HANESSUPPLY.COM
Pack
Wt. (lbs)
30.00
36.00
Pack
Cube
1.400
1.400
19 -5
19
Hand Tools
Product
Head
No.
Wt. (lbs)
1136100
5
1136200*
5
Albany/NE Division:
518.438.0139
Rochester Division:
585.235.0160
FAX:
FAX:
FAX:
716.826.4412
518.438.5343
585.235.0229
CCISCO: 843.238.1338
FAX:
843.238.8337
Hand Tools
Ames®
Ripping Chisels
Clay Picks
Used for digging in clay or packed earth, particularly when long or deep
ditches are to be dug.
Product
Head
Handle
Eye Repair
UPC
Pack
Pack
No.
Wt. (lbs)
Lgth.(in)
Size Handle
No.
Qty. Wt. (lbs)
1137500
5
36" Hickory
6
11436 0 49206 11375 6 6
45.00
1138400
6
36" Hickory
6
11436 0 49206 11384 8 6
51.00
®
1137700*
5
36" FiberPro
6
11435 0 49206 11377 0 6
43.20
Pack
Cube
3.400
3.400
1.400
*Head & Handle packed separately
Heavy-duty wood cutting
tools designed for rough
work.
Straight
Offset
Product Stock
Length
UPC
Pack
Pack
No.
(in)
(in)
No.
Qty. Wt. (lbs)
1165800 3/4 18" Straight 0 49206 11658 0
5
10.30
1166100 3/4
17" Offset 0 49206 11661 0
5
11.00
Pack
Cube
0.122
0.122
Molding Tool
Used to remove molding from walls and doorways.
Clay Picks
Repair Handles
Product
No.
1143600
1143500
Handle
Fits
UPC
Pack
Pack
Lgth. (in)
(lbs., eye)
No.
Qty. Wt. (lbs)
36" Hickory 5 - 7 lbs., 6 eye 0 49206 11436 4 12
30.00
36" FiberPro® 5 - 7 lbs., 6 eye 0 49206 11435 7 12
36.00
Pack
Cube
1.400
1.400
Tamper with Handles
Used to pack and level soil.
Product
Head
No.
Wt. (lbs)
1133400
11
1133700
14
Handle
Eye Repair
UPC
Pack Pack
Pack
Lgth. (in)
Size Handle
No.
Qty. Wt. (lbs) Cube
8x8
42" Ash 11440 0 49206 11334 3 2
21.80
0.700
10 x 10 42" Ash 11440 0 49206 11337 4 2
29.20
1.200
Handle
Lgth. (in)
42" Ash
Fits
UPC
Pack
Pack
Pack
(lbs., eye)
No.
Qty. Wt. (lbs) Cube
11 lbs., 14 lbs. 0 49206 11440 1 12
18.00 1.700
BARS, PUNCHES & PINS
Fully Painted Gooseneck
Wrecking Bars
Product
No.
1169400
1169800
1170500
1171000
1171600
1172400
1172500
1173000
1173100
1173300
Stock
(in)
1/2
5/8
3/4
3/4
3/4
7/8
7/8
1
1
1
Length
(in)
12
18
24
30
36
36
42
48
36
60
Stock
(in)
1/2
Length
(in)
10
UPC
Pack
No.
Qty.
0 49206 11666 5
5
Pack
Wt. (lbs)
3.15
Pack
Cube
0.067
Double Claw Carpenter Bars
Used for demolition work. Molding can be removed easily
with end opposite the gooseneck and nails can be
removed with the claw end. For close joint
applications.
Product
No.
1167600
1167700
Stock
(in)
3/4
3/4
Length
(in)
24
30
UPC
Pack
No.
Qty.
0 49206 11676 4
5
0 49206 11677 1
5
Pack
Wt. (lbs)
16.90
20.00
Pack
Cube
0.388
0.458
Pack
Wt. (lbs)
25.00
40.00
Pack
Cube
0.388
0.488
Two-in-One Salvage/
Contractor Bars
Tamper Repair Handle
Product
No.
1144000
Product
No.
1166600
Used for demolition work, roofing and
siding removal.
Product
No.
1164200
1164300
Stock
(in)
3/4
3/4
Length
(in)
18
30
UPC
Pack
No.
Qty.
0 49206 11642 9 10
0 49206 11643 6 10
Post Hole Digger Bars with Tamper Top
UPC
Pack
Pack
No.
Qty. Wt. (lbs)
0 49206 11694 8 10
8.50
0 49206 11698 6 10
19.10
0 49206 11705 1 10
33.30
0 49206 11710 5 10
40.00
0 49206 11716 7 10
47.50
0 49206 11724 2
1
7.25
0 49206 11725 9
1
8.25
0 49206 11725 9
1
12.30
0 49206 11731 0
1
10.00
0 49206 11733 4
1
15.50
Used to dig holes in the ground with the blade end. The tamper head
is used to tamp the earth around fence posts and deck
supports in the ground.
Pack
Cube
0.107
0.227
0.388
0.458
0.584
0.272
0.272
0.416
0.312
0.520
Straight
Bent
Product
No.
1167900
1168000
1160000
Stock
(in)
1
1
1
Length
(in)
30" Bent
48"
69"
Net Wt.
UPC
(lbs)
No.
8.25 0 49206 11679 5
12
0 49206 11680 1
17
0 49206 11600 9
Pack
Qty.
1
1
1
Pack
Pack
Wt. (lbs) Cube
8.30
0.100
12.50
0.100
17.00
0.100
Diamond Point San Angelo Bars
Utility Bar
Used to open crates and boxes. Nail remover on one end.
Hand Tools
19
Product
No.
1174700
1175100
1175200
Product
Stock
Length
UPC
Pack
Pack
Pack
No.
(in)
(in)
No.
Qty. Wt. (lbs) Cube
1167000 1/4" x 1-3/8" 13" 0 49206 11670 2 5
7.74
0.107
Nail Pullers
Used for a variety of
carpentry and nail
pulling applications.
Product
No.
1164700
1165300
1165700
19 -6
Single
End
Double
End
Stock
Length
UPC
Pack
(in)
(in)
No.
Qty.
5/8 10-1/2" Single End 0 49206 11647 4
5
5/8
11" Double End
0 49206 11653 5
5
5/8 15" Combination 0 49206 11657 3
5
Combination
Pack
Wt. (lbs)
5.35
5.35
6.90
Pack
Cube
0.067
0.067
0.086
Stock
(in)
1" Hex
1" Hex
1" Hex
Length Net Wt.
UPC
Pack
Pack
Pack
(in)
(lbs)
No.
Qty. Wt.(lbs) Cube
48
12
0 49206 11747 1
1
11.50 0.062
60
14
0 49206 11751 8
1
14.25 0.078
72
17
0 49206 11752 5
1
16.63 0.094
Warehouse Bar
Used to move material on pallets and adjust loads.
Product
No.
1169200
Stock
(in)
1" Hex
Length Net Wt.
UPC
Pack
Pack
Pack
(in)
(lbs)
No.
Qty. Wt.(lbs) Cube
48
11
0 49206 11692 4
1
11.50 0.282
WWW.HANESSUPPLY.COM
Albany/NE Division:
518.438.0139
Rochester Division:
585.235.0160
FAX:
FAX:
FAX:
716.826.4412
518.438.5343 CCISCO: 843.238.1338
585.235.0229
FAX: 843.238.8337
Hand Tools
Ames
®
Diamond Point Chisel Slate Bars
Stripping Bars with Claw
Primarily used in mine
work. The diamond point is
used as a jack bar on track
jacks. The other end is used
to loosen slate in the mine.
Used to strip wooden forms from cured concrete.
Has a claw to remove nails.
Product
No.
1169100
1164600
Stock
(in)
1" Hex
1" Hex
Bent
Straight
Length
Net Wt.
UPC
Pack Pack
(in)
(lbs)
No.
Qty. Wt. (lbs)
60" Bent
14
0 49206 11691 7 1
14.31
60" Straight
14
0 49206 11646 7 1
14.31
Pack
Cube
0.063
0.056
Telegraph Digging Bars
Stock
(in)
1
1
Length
(in)
72
96
Stock
(in)
7/8
7/8
1
Length
(in)
36
42
48
Net Wt.
UPC
Pack Pack
(lbs)
No.
Qty. Wt. (lbs)
5.25 0 49206 11686 3 10
52.50
8
0 49206 11687 0
1
8.00
12
0 49206 11688 7
1
12.13
Pack
Cube
0.584
0.239
0.320
Stripping Bars without Claw
Used to dig holes for insertion of post. The sharp
end is used to line up long posts once they
are in and being tamped into place.
Product
No.
1168500
1168400
Product
No.
1168600
1168700
1168800
Used to strip wooden forms from cured concrete.
Net Wt.
UPC
Pack
Pack
(lbs)
No.
Qty. Wt. (lbs)
17
0 49206 11685 6
1
16.63
22
0 49206 11684 9
1
22.13
Pack
Cube
0.088
0.118
Warehouse Loading Bar
Used for moving pallets and loads in warehouses
or on trucks.
Product
No.
1168900
1169000
Stock
(in)
7/8
1
Length
(in)
42
48
Net Wt.
UPC
Pack
Pack
(lbs)
No.
Qty. Wt. (lbs)
8
0 49206 11689 4 1
8.00
12
0 49206 11690 0 1
12.13
Pack
Cube
0.205
0.240
Slate Bars
Used primarily to loosen slate in mines.
Product
No.
1165600
Stock
(in)
1-1/4
Length
(in)
60
Net Wt.
UPC
Pack
Pack
Pack
(lbs)
No.
Qty. Wt.(lbs) Cube
18
0 49206 11656 6
1
18.00 0.238
Pinch Point Crowbars
Used to pry and move heavy objects.
Product
No.
1174600
1174400
1174200
1174300
Stock
(in)
1" Hex
1" Hex
1" Hex
1" Hex
Length
(in)
36
48
54
60
Net Wt.
(lbs)
8
11
12
14
UPC
Pack Pack
No.
Qty. Wt. (lbs)
0 49206 11746 4 1
8.32
0 49206 11744 0 1
11.54
0 49206 11742 6 1
12.50
0 49206 11743 3 1
14.31
Pack
Cube
0.042
0.055
0.062
0.069
Connecting Bars
Product
No.
1161300
1161400
1161600
1161800
1161900
1160100
1162400
1162500
Stock
(in)
7/8
1
1-1/8
1-1/4
1-1/4
1-1/4
1-3/8
1-1/2
Length
(in)
36
48
51
54
57
60
64
66
Net Wt.
(lbs)
6
10
12
14
16
18
22
26
UPC
Pack
Pack
No.
Qty. Wt. (lbs)
0 49206 11613 9
1
6.25
0 49206 11614 6
1
10.25
0 49206 11616 0
1
12.25
0 49206 11618 4
1
14.00
0 49206 11619 1
1
16.00
0 49206 11601 6
1
18.00
0 49206 11624 5
1
22.00
0 49206 11625 2
1
26.00
Pack
Cube
0.021
0.028
0.046
0.049
0.051
0.054
0.070
0.086
Construction tool used to line up bolt holes in
erection steel.
Product
No.
1160600
Stock Length
(in)
(in)
7/8" Hex
30
Net Wt.
UPC
Pack
Pack
(lbs)
No.
Qty. Wt. (lbs)
5
0 49206 11606 1 10
50.00
Pack
Cube
0.388
Chisel Pry Bars
Wedge Point Crowbars
Product
No.
1162600
1162700
1162800
1162900
1163000
1160200
1163200
1163300
Stock
(in)
7/8
1
1-1/8
1-1/4
1-1/4
1-1/4
1-3/8
1-1/2
Length
(in)
36
48
51
54
57
60
64
66
Net Wt.
(lbs)
6
10
12
14
16
18
22
26
UPC
Pack
Pack
No.
Qty. Wt. (lbs)
0 49206 11626 9
1
6.25
0 49206 11627 6
1
10.25
0 49206 11628 3
1
12.25
0 49206 11629 0
1
14.00
0 49206 11630 6
1
16.00
0 49206 11602 3
1
18.00
0 49206 11632 0
1
22.00
0 49206 11633 7
1
26.00
Pack
Cube
0.021
0.028
0.046
0.049
0.051
0.054
0.070
0.086
Peerless Bars
Product
Stock
No.
(in)
1160700 1/2" Hex
1160900 5/8" Hex
1161100 3/4" Hex
Length
(in)
13
20
24
UPC
Pack
No.
Qty.
0 49206 11607 8 10
0 49206 11609 2 10
0 49206 11611 5 10
Pack
Wt. (lbs)
7.50
15.00
27.50
Pack
Cube
0.086
0.122
0.219
Hexagon Offset Pinch Bars
Used for lining up holes and prying work. Adaptable
for use in automotive work for pulling engine
parts into place and tightening generators.
Product
No.
1163400
1163500
1163600
Stock Length
(in)
(in)
3/4" Hex
26
7/8" Hex
30
1" Hex
36
UPC
Pack
No.
Qty.
0 49206 11634 4
5
0 49206 11635 1
5
0 49206 11636 8
5
Pack
Cube
0.211
0.211
0.250
Pack
Wt. (lbs)
2.80
8.10
12.50
Pack
Cube
0.067
0.130
0.130
19
Hand Tools
Pack
Wt. (lbs)
15.00
26.25
41.90
Rolling Head Bars
Product
No.
1160400
1160500
Stock
Length
Net Wt.
(in)
(in)
(lbs)
1
60" Short Point
14
1
60" Long Point
14
UPC
No.
0 49206 11604 7
0 49206 11605 4
Pack
Pack
Pack
Qty. Wt. (lbs) Cube
1
14.50 0.106
1
14.50 0.110
Used to roll engine onto block and align holes.
Product
No.
1173400
1173500
1173700
Stock
(in)
3/8
1/2
5/8
Length
(in)
9
15
16
WWW.HANESSUPPLY.COM
UPC
Pack
No.
Qty.
0 49206 11734 1 10
0 49206 11735 8 10
0 49206 11737 2 10
19 -7
Albany/NE Division:
518.438.0139
Rochester Division:
585.235.0160
FAX:
FAX:
FAX:
716.826.4412
518.438.5343
585.235.0229
CCISCO: 843.238.1338
FAX:
843.238.8337
Hand Tools
Ames®
Tie or Plug Punches
Manhole Cover Lifter
Used to lift manhole covers.
Product
No.
1175300
Stock
(in)
5/8
Length
(in)
24
Hickory
Handle
29-AH
UPC
Pack
Pack
Pack
No.
Qty. Wt. (lbs) Cube
0 49206 11753 2
6
22.50
0.388
Backing Out Punches
Blacksmiths’ tool for backing out bolts, rivets and pins.
Product
No.
1149400
1149600
1149800
1150000
1150100
1150300
Handle
Punch
Lgth. (in) Dia. (in)
16" Hickory
3/8
16" Hickory
1/2
16" Hickory
5/8
16" Hickory
3/4
16" Hickory
7/8
16" Hickory
1
Eye
Size (in)
3/4 x 1
3/4 x 1
3/4 x 1
3/4 x 1
3/4 x 1
3/4 x 1
Repair
Handle
11423
11423
11423
11423
11423
11423
UPC
Pack
Pack
No.
Qty. Wt. (lbs)
0 49206 11494 4
5
16.00
0 49206 11496 8
5
16.00
0 49206 11498 2
5
16.50
0 49206 11500 2
5
16.50
0 49206 11501 9
5
16.50
0 49206 11503 3
5
16.50
Pack
Cube
0.300
0.300
0.300
0.400
0.400
0.400
Product
No.
1024700
1024900
1024800
Product
Stock
Length
UPC
Pack
Pack
Pack
No.
(in)
(in)
No.
Qty. Wt. (lbs) Cube
1142300 16" Hickory 2 - 4 0 49206 11423 4 12
6.00
0.500
Head
Wt. (lbs)
4 lbs. - Alloy
4 lbs. - Alloy
4 lbs. - Alloy
Head
Handle
Wt. (lbs)
Lgth. (in)
5-1/2 lbs. - Alloy 24" Hickory
5-1/2 lbs. - Alloy 24" Safety Grip
UPC
Pack
Pack
No.
Qty. Wt. (lbs)
0 49206 11482 1 50
20.00
0 49206 11483 8 50
25.00
0 49206 11484 5 25
20.00
0 49206 11485 2 25
30.00
0 49206 11486 9 15
22.50
0 49206 11487 6 15
55.00
Product
No.
1017800
1018000
1017900
1018100
Head
Handle
Wt.(lbs)
Lgth.(in)
Pack
Cube
0.200
0.200
0.200
0.200
0.200
0.200
Product
Head
Handle
Wt. (lbs)
Lgth. (in)
No.
1021700 10 lbs. - Carbon 36" Hickory
1021900 10 lbs. - Alloy 36" Hickory
1022100 10 lbs. - Alloy 36" Safety Grip
Hand Tools
Product
No.
1018300
1018500
1018400
1018600
19 -8
Head
Handle
Wt. (lbs)
Lgth. (in)
5-1/2 lbs. - Alloy
24" Hickory
5-1/2 lbs. - Alloy
36" Hickory
Safety Grip
Handle
5-H & 5-AH
Eye
Head Dia. Long Dia. Short Pack Pack Pack
Size (in) Lgth. (in) End (in) End (in) Qty. Wt.(lbs) Cube
1 x 1-3/8
15
1-1/4
1-5/8
4
46.20 3.244
1 x 1-3/8
15
1-1/4
1-5/8
4
46.20 3.244
1 x 1-3/8
15
1-1/4
1-5/8
4
46.20 3.244
Safety Grip
Handle
57-AH
Hickory
Handle
57-AH
Safety Grip
Handle
1-QAH
Eye
Head
Pack Pack
Size (in) Lgth. (in) Qty. Wt. (lbs)
3/4 x 1-3/8 10-1/2
5
30.90
3/4 x 1-3/8 10-1/2
5
35.00
3/4 x 1-3/8 10-1/2
5
30.90
3/4 x 1-3/8 10-1/2
5
35.00
Hickory
Handle
1-QSAH
Pack
Cube
1.866
2.871
1.866
2.871
Track Spike Lifters (Area Plan 32)
Pack
Cube
1.290
1.934
1.285
1.934
Product
No.
1025800
1025900
Head
Wt. (lbs)
6 lbs. - Alloy
6 lbs. - Alloy
Square Bit Track Chisels (Area Plan 35)
19
Safety Grip
Handle
36-AH
Eye
Head
Pack Pack
3/4 x 1-3/8
13
4
27.20
3/4 x 1-3/8
13
4
30.40
3/4 x 1-3/8
13
4
27.20
3/4 x 1-3/8
13
4
30.40
Hickory
Handle
5-H & 5-AH
CHISELS, PUNCHES & MAULS:
Round Bit Track Chisels (Area Plan 17)
Hickory
Handle
1-QAH
Pack
Cube
1.643
2.527
1.643
Bell Pattern Spike Mauls (Area Plan 3)
Used to line up steel for erection work.
Length
(in)
6-1/2
7
7-1/8
8
8-1/2
9-1/2
Eye
Head
Pack Pack
3/4 x 1-3/8 12-1/2
4
17.00
3/4 x 1-3/8 12-1/2
4
21.00
3/4 x 1-3/8 12-1/2
4
17.00
Hickory
Handle
36-AH
Barrel Type Drift Pins
Stock
(in)
9/16
11/16
13/16
15/16
1-1/16
1-3/16
Handle
Lgth. (in)
24" Hickory
36" Hickory
24" Safety Grip
Round Point Track Punches (Area Plan 19)
Product
No.
1025100
1025300
1025200
1025400
Backing Out Punche Repair Handle
Product
No.
1148200
1148300
1148400
1148500
1148600
1148700
Safety Grip
Handle
29-AH
Safety Grip
Handle
1-QSAH
Eye
Head
Pack
Pack
3/4 x 1-3/8 10-1/2
5
30.90
3/4 x 1-3/8 10-1/2
5
35.00
3/4 x 1-3/8 10-1/2
5
30.90
3/4 x 1-3/8 10-1/2
5
35.00
Pack
Cube
1.285
1.934
1.285
1.934
WWW.HANESSUPPLY.COM
Handle
Lgth. (in)
36" Hickory
36" Safety Grip
Eye
Size (in)
1 x 1-3/8
1 x 1-3/8
Head
Pack Pack
Lgth. (in) Qty. Wt. (lbs)
7/8
2
14.60
7/8
2
14.60
Pack
Cube
0.891
0.891
Albany/NE Division:
518.438.0139
Rochester Division:
585.235.0160
FAX:
FAX:
FAX:
716.826.4412
518.438.5343 CCISCO: 843.238.1338
585.235.0229
FAX: 843.238.8337
Hand Tools
Arrow
T59™ Wiring Tacker (continued)
Arrow®
T-50® Professional
Heavy Duty Staple Gun
• Chrome finish
• All-steel construction
• High carbon hardened steel working parts
• Visual refill window
• Patented jam-proof mechanism
• Easy squeeze double-leverage operation
Loads (85) Arrow #T-50® staples only of .050 wire
in 6 sizes; 1/4", 5/16", 3/8", 1/2", 9/16" and
CEILTILE®. Monel & stainless steel rust proof staples available. Used
extensively by building contractors, home do-it yourselfers and specialty
trade applicators for stapling insulation, ceiling tile, window screening,
upholstering, carpet padding, fence wire, metal lath, cornerite and 1,001
other jobs ranging from light to heavy duty work.
ET50TM Electro-Matic®
Staple Gun Tacker
• Solid-state electronic circuitry
• Exclusive on/off safety trigger lock
• Trigger-squeeze speed and ease of operation
• One-piece solid steel base construction
• Tough, impact-resistant housing
• Patented jam-proof mechanism
• Lightweight, compact, extremely well balanced for tireless use
• Hand-contoured handle grip for comfort
Used by building contractors, do-it-yourselfers and specialty trade applicators for tacking insulation, ceiling tile, window screening, upholstering, carpet padding, fence wire, cornerite and other jobs ranging from light to
heavy-duty work. Uses 6 Arrow T50® staple sizes: 1/4", 5/16", 3/8", 1/2",
9/16" and 17/32" CEILTILE®. Monel & Stainless Steel rust proof staples
available.
The above electric staple gun tacker is available in 110V is UL and C-UL listed.
* Monel® is a registered trademark of the ®Inco Family of Companies
Hammer Tackers
Arrow’s family of rugged, American-made Hammer Tackers feature: All
steel construction, high carbon hardened steel working parts, patented
jam-proof mechanisms, precision-locked rear loading, a retractable striking
edge & specially designed power grip handles. Every Arrow Hammer
Tacker is finished in durable chrome plating
to withstand the bumps and scratches of
daily use.
HT65TM
HT65TM Extra Heavy Duty
Loads full strip (52) Arrow HT65 staples only,
of .062 wire with 1" crown and 3/4" leg
length.
HT30
®
HT30TM
TM
Loads 2 full strips (260) Arrow T30 and T32
1/4", 5/16" and T30 3/8" of .030 wire staples.
HT50PTM Heavy Duty
Loads 2 full strips (170) Arrow T50 staples of
.050 wire in 3 sizes: 5/16", 3/8" and 1/2".
HT50TM
T59TM Wiring Tacker
P22TM Plier-Type Stapler
Designed for reaching into hard-to-get-at
places for stapling from any position or
angle.
• All steel construction
• Chrome finish
• Hand guide loop
• Cam actuated double leverage
• Deep throat
• Easy-to-get-at mechanism
Loads (150) Arrow P22 staples only, in 2 sizes: 1/4" and 5/16". Used by
dry cleaners, florists, supermarket check-out counters, etc., for all types of
bagging, tagging, sealing, labeling and numerous other applications.
P35TM Heavy Duty Plier-Type Stapler
Same design and rugged construction
as Model P22 with more powerful drive
for accommodating tougher materials.
Loads (85) Arrow P35 staples only,
wedge-point, of .050 wire in 2 sizes: 1/4"
and 3/8".
Widely used in stores, plants, workshops and shipping rooms for sealing
kraft, burlap and jiffy bags; rug edge
binding; fastening extended carton flaps
and many other heavy production jobs in specialty markets.
P35STM Heavy Duty
Spear-Pointed Plier
Type Stapler
Same as model P35, except with spearpointed anvil arm for penetrating edges
of corrugated container for sealing from
within.
RH200TM Professional
• Comfortable vinyl grip
• Spring-loaded handle for easy
rivet loading and ejection
• Extended nose for hard-to-getat places
• Lock clip when not in use
• 4 nose pieces with wrench
• Uses 4 rivet sizes: 3/32", 1/8",
5/32" and 3/16"
For use in repairing lawn furniture, metal cabinets, aluminum doors and
windows, cooking utensils and baking pans, pails, ironing boards, metal
mail boxes, toys, power tools, bicycles, motor scooters, electrical fixtures,
automobile add-on and repairs; installing and repairing heating ducts,
gutters, downspouts, air conditioners, TV antennas. Fasten metal to metal,
canvas to canvas, canvas or leather to metal for 1001 uses.
– continues –
WWW.HANESSUPPLY.COM
19 -9
19
Hand Tools
Uses UL Listed 5911 Insulated Staples
Safety, speed and efficiency are built-in performance factors
that have made Arrow Staple Gun Tackers the preferred
fastening tools of professional wire and cable installers in
every field. 5 precision-made Arrow models, using a total
of 18 different staple types, fit a wide range of wire and
cable diameters for safer, snugger and neater fastening.
• Grooved guide
• Patented, jam-proof mechanism
• Shortspan, easy compression handle
• Chrome finish
• Grooved driving blade
No. 5911 Insulated Staples (300 Per Box) for use with T59 Wire Gun Tacker
Height Width
Per Ctn.
Item #
Description
(in)
(in)
(Bxs)
591168
Insulated Staple/Clear
1/4
1/4
40
591168BL
Insulated Staple/Black
1/4
1/4
40
591188
1/4
5/16
40
591188BL
1/4
5/16
40
591188BLSS Stainless Steel Insulated Staple/Black
1/4
5/16
40
591189
5/16
5/16
40
591189BL
5/16
5/16
40
591189BLSS Stainless Steel Insulated Staple/Black
5/16
5/16
40
591189SS
Stainless Steel Insulated Staple/Clear
5/16
5/16
40
Albany/NE Division:
518.438.0139
Rochester Division:
585.235.0160
FAX:
FAX:
FAX:
716.826.4412
518.438.5343
585.235.0229
CCISCO: 843.238.1338
FAX:
843.238.8337
Hand Tools
Arrow® / Channellock®
RHT300TM TwisterTM Professional
Channellock®
- Unique "Twistable" Head
- Plus All Features of the RH200
- Uses Same Size Rivets as RH200
Rivet in hard-to-get-at areas - behind the
furnace, beneath the auto dashboard, or
anywhere else. Because the Twister's
head turns 360° to fit into tight corners
and narrow spaces, while its handle
remains accessible and easy to
squeeze.
BigAzz® Tongue and Groove Plier
•
•
•
•
Right angle teeth grip in all directions.
Undercut Tongue and Groove, won't slip.
PermaLock Fastener eliminates nut and bolt failure.
Reinforcing edge that minimizes
Pt. Length AdjustCap.
stress breakage.
No.
(in)
ment
(in)
• ChannelLock Blue comfort grips.
480 20-1/4
12
5-1/2
• Big as the job. Big as you need.
460
16
8
4-1/4
• The biggest pliers on the planet.
442
12
7
2-1/4" Curved Jaw
TR400TM
All Purpose Trigger Feed
*Safe-T-StopTM
prevents finger
pinch
• Check valve controls glue flow
• Built-in safety stand
• Contoured design for perfect balance
• Hi-impact/Hi-temp housing
This versatile glue gun bonds almost anything permanently in 60 seconds without the need of mixing or clamping.
The ideal instrument for repairs, hobbies, arts & crafts and much more.
Uses all Purpose, White Caulk/Sealer & Slow Set Glue stix.
440
430
422
420
421*
415
426
424
12
10
9-1/2
9-1/2
9-1/2
10
6-1/2
4-1/2
7
7
5
5
5
7
5
3
2-1/4
2
1-1/2" Curved Jaw
1-1/2
1-1/2
2" Smooth Jaw
7/8
1/2
TR550 Professional Automatic Lever Feed
• Clutch mechanism prevents glue
buildup
• Check valve controls glue flow
• Interchangeable nozzle
• Built-in drip tray/stand
• High volume melt chamber for fast and
steady even application
• Solid state P.T.C. heating system develops heat quicker and holds temperature for smooth consistent bonding
• Re-usable storage box
• Heavy duty circuitry
• 6 foot cord
480
Pt.
No.
414
410
307
430
422
420
*421
415
426
424
Length Adjust(in)
ment
14
6
9-1/2
4
7
–
Cap.
(in)
2
1-1/8
5/8
414
410
307
Long Nose Plier
• Perfectly mated cutter, heat-treated to
hold its edge.
• Crosshatching on jaws.
• Polished high carbon drop-forged steel.
• Channel Lock Blue comfort grips.
Hot Melt Glue Stix
All Purpose Clear - for Crafts,
Hobbies and General Repairs
Hand Tools
440
• Right angle teeth grip in all directions.
• Reinforcing edge that minimizes stress breakage.
• Safe-T-StopTM prevents finger pinch.
• Double Tongue and Groove won't slip.
• PermaLock Fastener eliminates nut and bolt failure.
• Built-in safety stand
• Trigger feed
• Interchangeable nozzle capability
Works with or without power cord. This unique
feature is especially useful for crafting and
detail gluing task. Once the gun reaches the
proper temperature, the cord can be removed
to prevent it from disturbing fragile appliques.
Perfect for jewelry, costumes, etc.
For woodworking, ceramics, leather,
canvas, fabrics, cardboard, plastics,
metal, etc. Press surfaces together within 15 seconds. Sets in 30 to 60 seconds. Available in packages of 6 - 4"
sticks to a card (AP5), packages of 12 10" sticks (AP10), bulk packages of 24 4" sticks (BAP5), 25 lb. - 4" bulk (AP1000) and 25 lb. - 10" bulk (AP2000).
Pt.
No.
317
318
326
3017
3026
3036
3037
386
Length
(in)
7-1/2
8-3/8
6
7-1/2
6
6
7-1/2
5-1/2
With/Without
Side Cutter
With Side Cutter
With Side Cutter
With Side Cutter
Without Side Cutter
Without Side Cutter
Without Side Cutter
Without Side Cutter
Without Side Cutter
CS7TM White Caulk/Sealer/Glue - for Caulking and Sealing
For windows, walls, tubs, boats, etc. Sets in 30 to 60 seconds.
Available 6 - 4" sticks to a card.
SS6TM Slow Set/Woodworking - Allows More Time for
Lineup Of Larger Areas
For wood, metal, plastics, leather, fabrics, etc. Sets in 90 to 120 seconds.
Available 6 - 4" sticks to a card and 24 - 4" sticks (BSS6) Slow
Set/Woodworking.
19 -10
442
NutbusterTM
CTR600TM Cordless
Professional
19
460
WWW.HANESSUPPLY.COM
317
3026
318
3036
326
3037
3017
386
Albany/NE Division:
518.438.0139
Rochester Division:
585.235.0160
FAX:
FAX:
FAX:
716.826.4412
518.438.5343 CCISCO: 843.238.1338
585.235.0229
FAX: 843.238.8337
Hand Tools
Channellock / Cooper Hand Tools - Lufkin
®
Linemen’s Plier
Cooper Hand Tools -
• Perfectly mated cutter, heat-treated to
hold its edge.
• Polished high carbon drop-forged steel.
• Useful crushing area.
Pt.
No.
346
347
348
349
369
350-S
3047
3048
3248
Lgth.
(in)
6
7
8-1/2
9
9
9
7
8-1/2
8-1/2
Pt.
No.
308
337
337W
338
435
436
436S
148-10
148-14
911
437
447
486S
356
357
358
• Perfectly mated cutter, heattreated to hold its edge.
• Polished high carbon dropforged steel.
• ChannelLock Blue comfort
grips.
308
50 Footer
346, 347, 348
Type
Rounded Nose
Rounded Nose
Rounded Nose
Wire Master High Leverage Plier
High Leverage/Rounded Nose
Ironworker's Plier Coiled Spring
Bevel Nose
Bevel Nose
With Cutter and Crimper
Cutting Plier
337
Lufkin
350-S
349
3047, 3048
369
3248
Lgth.
(in)
Type
8
Short Nose Shearing Plier
7
Lap Joint
7
Wiring Plier, Cuts, Strips Insulation
8
Lap Joint
5
Box Joint
6
Box Joint
6
Box Joint Coil Spring
10
Cutting Nippers
14
Cutting Nippers
9-1/2
Cable Cutter
7
Box Joint
7-3/4
Curved Diagonal, Box Joint
6
Plastic Cutting Diagonal
6
End Cutter
7
End Cutter
8
End Cutter
337W
• Unique blade graphics simplify layout work
• 1" wide steel blade, unique among 50' tape measures; rigid 1" blade
allows user to push the blade for one-man use
• 7-1/2' stand-out, just like a power tape
• Durable ASB case in Hi-Viz® yellow (EL50) or orange is easy to find on
the job site
• Ribbed insert makes easy to hold on to
• Virtually unbreakable Quad HookTM; four rivets for extra strength
• Convenient removable belt clip
Cat.
Blade
Blade
No.
Width (in) Length (ft)
EL50
1
50
EL50C
1
50
EL50D
1
50' Engineer's
EL15CME
1
50
EL15M
25mm
15m
Power Return Tapes - Series 2000
• Case designed to fit perfectly in the hand
• Lightweight, high strength chrome finished case
• Fits easily into most tape holsters
• Bright yellow blade has clear easy-to-read numerals
• Toggle lock is positioned for convenient operation and holds the blade
securely in any position
• Virtually unbreakable Quad Hook; four rivets for extra strength.
• Cushioned
Cat.
Blade
Blade
blade return
No.
• Removable
2133
1
33
belt clip
2133D
1
33' Engineer’s
2125
1
25
• All shelf pack
power tapes
2325
3/4
25
2325D
3/4
25' Engineer’s
are carded
2316
2312
2312D
2212
3/4
3/4
3/4
1/2
16
12
12' Engineers
12
Power Return Tapes - Series 1000
338
435, 436, 436S
437
447
486S
356, 357, 358 148-10,
148-14
911
Slip Joint Plier
• Wire Cutting shear.
• Polished high carbon drop forged steel.
• PermaLock Fastener, eliminates nut and bolt failure.
Pt.
No.
516
526
537
546
548
558
5410
Lgth.
(in)
Description
6
Thin nose, Wire Cutting Shear
6
Popular priced, Wire Cutting Shear
7
Precision Tool with Fine Side Cutter
6
Heavy-duty Wire Cutting Shear
8
8
10
516
35-220
Cat.
No.
1325
1316
1312
Color
Black
Black
Black
Blade
Blade
3/4
25
3/4
16
3/4
12
548
Pt.
No.
35-220P
*35-220
35-250P
*35-250
35-280P
*35-280
35-300P
*35-300
558
5410
Lgth. Jaw Width
(in)
(in)
9
15/16
9
15/16
10
1-1/16
10
1-1/16
11
1-1/16
11
1-1/16
12
1-1/16
12
1-1/16
• Chrome plated case (except for the Y8210 & Y8212 which have a black case)
• Available in widths of 1/2" and 3/4" and up to 12' in length
• Yellow clad blade
• Power retraction operation
• Belt clip
Cat.
Blade
No.
Width (in)
W928
1/2
W9210
1/2
W9212
1/2
W9312
3/4
Blade
Length (ft)
8
10
12
12
*ChannelLock Blue Comfort Grips.
WWW.HANESSUPPLY.COM
19 -11
19
Hand Tools
• Precision matched jaws.
• High carbon drop-forged steel.
• Perfectly mated cutter heat-treated to hold
its edge. Hardness HRC 58-60.
537
Mezurall®
546
Concretors’ Nipper
526
Black and Green cases
• Case designed to fit perfectly in the hand
• Lightweight, high strength case
• Fits easily into most tape holsters
• Bright yellow blade has clear easy-to-read numerals
• Toggle lock is positioned for convenient operation and holds the blade
securely in any position
• Virtually unbreakable Quad HookTM; four
rivets for extra strength (1" blade only)
• Cushioned blade return
• Removable belt clip
Albany/NE Division:
518.438.0139
Rochester Division:
585.235.0160
FAX:
FAX:
FAX:
716.826.4412
518.438.5343
585.235.0229
CCISCO: 843.238.1338
FAX:
843.238.8337
Hand Tools
Lufkin
Cooper Hand Tools ®
Hi-Viz Universal Lightweight
• High impact polystyrene case; available in Hi-Viz® orange, green or yellow
• Yellow clad blade .005"/0.13mm thick
• Easy wind nylon drum
• East-to-read black and red markings
• Hook ring is retained neatly in the contoured mouth of the case
• Removable belt clip
• Metric-English tape measures have a 2-sided end hook for use with
either scale
Cat.
No.
HG15CM
HG15CME
HG30CM
HG30CME
50
100L
HV15CM
HV15CME
HV30CM
HV30CME
BY15CM
BY15CME
BY30CM
BY30CME
Color
Green
Green
Green
Green
Orange
Orange
Orange
Orange
Orange
Orange
Yellow
Yellow
Yellow
Yellow
Blade
Width (in)
10mm
3/8" (10mm)
10mm
3/8" (10mm)
3/8"
3/8"
10mm
3/8" (10mm)
10mm
3/8" (10mm)
10mm
3/8" (10mm)
10mm
3/8" (10mm)
Blade
Length (ft)
15mm
50' (15m)
30m
100' (30m)
50'
100'
15m
50' (15m)
30m
100' (30m)
15m
50' (15m)
30m
100' (30m)
Cat.
No.
1709
Blade
Length (ft)
3
Blade
Length (ft)
6
Banner
Hand Tools
• Professional tradesman’s quality
• Rugged, vinyl-covered steel case
• Yellow clad tape; .008" / 0.2mm thick
• Large easy action winding drum and friction
washers
• Nylon rollers guide the tape smoothly in and out
of case
• Available in 3/8" / 10mm width and up to
164’/50m length
• Bold graduations with black and red numbers for
accurate measuring
• “H” prefix denotes product blade is fitted with a folding hook ring
19 -12
Blade
Width (in)
3/8
3/8
Blade
Length (ft)
50
100
Blade
Length (ft)
150
200
Blade
Width (in)
1/2
Blade
Length (ft)
300
• 1830DMM and 1850DMM are Engineer's tapes
• Nominal thickness .022" Nylon-Clad steel tape
has wear resistant nylon
• Easy-to-read 1/2"/13mm wide yellow blade in
Hi-Viz® orange case
• Lightweight open reel is easy to handle and
rewind
• 1806 and 1808 graduated feet and inches to
1/8ths
• 1830MM and 1850MM graduated to millimeters,
numbered in millimeters and meters
• Designed for measuring diameters of pipe, cable, tire or any circular object
• Polished chrome case
• Zero falls in the same place on each side of the blade; conversion from
diameter to circumference is made simply by turning the blade
• Model W606P shows diameter inches to 1/64ths; Model
W606PD to 100ths, W606PM to millimeters
• Easy-to-read bold graduations on yellow background
• Spring action returns blade to case
Cat.
No.
HW223
HW226
Blade
Width (in)
1/2
1/2
Hi-Viz® Atlas® Ny-Clad®
Pocket Tapes - Executive® Diameter
19
Cat.
No.
1707
1708
• Sturdy open case
• Long handle for fast and effortless rewinding
• Hi-Viz orange case
• Ideal for the professional and homeowner
• Easy-to-read bold graduations on yellow background
• Spring action returns blade to case
• Strong key ring attached to tape rule with flexible
connector; fits easily in pocket or purse
• 3' easy-to-read blade
• Blade is not replaceable
• Available in black, Hi-Viz orange & green
Cat.
Blade
No.
Width (in)
W606P
1/4
• Lightweight open reel is easy to handle and
rewind; line does not collect dirt in case
• Hi-Viz orange case
Fiberglass Tapes - Hi-Viz
Linear Reel
Key Ring
Cat.
Blade
No.
Width (in)
KR613
1/4
Fiberglass Tapes Hi-Viz Linear Reel
Cat.
No.
1806
1806D
1808
1808D
1830MM
1830DMM
1830MME
1850MM
1850DMM
1850MME
Blade
Width (in)
1/2
1/2
1/2
1/2
13mm
1/2" (13mm)
1/2" (13mm)
13mm
1/2" (13mm)
1/2" (13mm)
Blade
Length (ft)
100
100
200
200
30m
100' (30m)
100' (30m)
50m
164' (50m)
164' (50m)
1806
1808
FOLDING WOOD RULES - Red End® Series
• First choice of carpenters and other professional craftsmen
• Boxwood finish wood sections are 25% thicker than regular wood rules,
withstands daily usage
• Bold red & black markings contrast sharply against white or natural finish
background
• Clear, abrasive-resistant coating protects markings
• Long wearing, riveted lock joints eliminate end play and retain accuracy
• Brass plated end clasps and strike plates prevent wear
Red End® Extension
• 6' and 8' wood rules available
• Graduated slide rule extends up to 6"
• Slide rule runs under friction in T-slot and stops at each end to prevent
slide from falling out
• X46X has two 6" extension slides; an extension is ready for use on the
first section
• HX46 has hook; zero falls at inside of hook, for distance measuring
• Marked both sides and both edges
• X46F has flat, inside markings; numbering begins on inside of rule
• Graduated to 1/16ths of an inch, 16" stud centers in red, regular outside
markings
Cat.
No.
X46
HX46
X48
X46F
X46X
Blade
Width (in)
5/8
5/8
5/8
5/8
5/8
WWW.HANESSUPPLY.COM
Blade
Length (ft)
6
6
8
6
6
Albany/NE Division:
518.438.0139
Rochester Division:
585.235.0160
716.826.4412
518.438.5343 CCISCO: 843.238.1338
585.235.0229
FAX: 843.238.8337
FAX:
FAX:
FAX:
Hand Tools
Cooper Hand Tools -
Lufkin & Nicholson
Red End®
Kinds of Teeth:
•
•
•
•
Single-cut
Marked on both sides, both edges
Graduated to 1/16ths both edges; 16” stud centers marked in red
Regular outside markings
066F has inside markings; numbering begins on inside of rule; measurement lies close to the work
• 062CME is marked both sides, reading left to right on both sides; rule is
graduated in millimeters with centimeter and meter markings on metric
side; English side is marked to 1/16ths
Cat.
Blade
Blade
No.
066
5/8
6
066F
5/8
6
068
5/8
8
068F
5/8
8
062CME
5/8
6
Red End® Engineer’s
• 066DM and 1066DM graduated in millimeters and feet, 1/10ths and
1/100ths
• 066D and 1066D graduated in feet, 1/10ths and 1/100ths of feet
• Red foot figures
• Regular outside markings in feet, inches and 1/16ths
• Decimal points on engineer’s scale prevent reading errors
Cat.
Blade
No.
Width (in)
066D
5/8
1066D
5/8
066DM
5/8
1066DM
5/8
Nicholson
File Terminology
• Work to be accomplished, roughing or finishing, will determine type of
teeth and coarseness for each application
• Most American pattern files are available with 3 grades of cut: bastardcut, second-cut and smooth-cuts
• Swiss pattern files are available in seven cuts: No. 00, 0, 1, 2, 3, 4 and 6
• The degree of coarseness is greater in longer files, but differences
between bastard, second and smooth are proportionate
Coarseness:
Second Cut
1
• Series of individual teeth which are
formed by a single-pointed tool
• Produces a rough cut that is used primarily on wood, hooves, aluminum and lead
Magicut
2
• Teeth arranged in curved contours
across the file face
• Curved-cut file is normally used in
automotive body shops for smoothing body panels
AMERICAN PATTERN FILES:
Aluminum Files-Type “A” Flat
•
•
•
•
•
Special tooth construction eliminates clogging when filing aluminum
Flat shape
Cat.
Length
Double-cut
No.
(in)
All sizes have same number of teeth per inch
6
Smooth finish obtained by using shearing cut toward left 00001
00024
00047
00070
8
10
12
Aluminum Files-Type “A” Half Round
3
4
6
• Length is measured exclusive of tang, from point to heel, unless
specified otherwise
• Desired stroke length, type of material and size will determine length
required
Length:
Tang
Rasp-cut
Smooth Cut
Swiss Pattern Files
0
• 2 sets of diagonal rows of teeth
• Second set of teeth cut in opposite diagonal direction and on top of the first set
• First set of teeth is known as the overcut, second is known as upcut
• Upcut is finer than overcut
• Double-cut file is used with heavier pressure than the single-cut
and removes materials faster from the workpiece
Curved-cut
Cooper Hand Tools -
00
Double-cut
• Single cut teeth divided by angular serrations into shorter cutting edges, which
free themselves readily from chips and
perform roughing and smoothing at the same time
Blade
Length (ft)
6
6
6.5
6.5
Bastard Cut
• Single set of parallel, diagonal rows
of teeth
• Single-cut files are often used with light pressure to produces a smooth
surface finish or to put a keen edge on knives, shears or saws
•
•
•
•
•
Special tooth construction eliminates clogging when filing aluminum
Half-round shape
Cat.
Length
Double-cut
No.
(in)
All sizes have same number of teeth per inch
00113
6
Smooth finish obtained by using shearing cut toward left 00136
8
00161
00187
10
12
Cat.
No.
01232
01260
Length
(in)
8
10
Cabinet Files
Heel
Belly
Point
Length
• Used by cabinetmakers and woodworkers
• Files are half-round in section
• Teeth are slightly finer than those of wood files
• Radius is larger and thinner than regular half round files
Cantsaw Files
Shape:
• Used for sharpening crosscut saws with “M” teeth, circular
teeth with less than 60-degree angle
• Triangular shape
• Single-cut
• Edges set and cut
• Same number of teeth per inch as mill bastard files of
equivalent length
• Regularly supplied with “cut back” unless “safe backs”
specifically ordered
WWW.HANESSUPPLY.COM
saws and saw
Cat.
Length
No.
(in)
Cut Back
01327
6
01387
8
01418
10
Safe back
01448
6
19 -13
19
Hand Tools
• Area to be filed will determine specific cross-section
(round, square, flat, etc.) to be used
Albany/NE Division:
518.438.0139
Rochester Division:
585.235.0160
FAX:
FAX:
FAX:
716.826.4412
518.438.5343
585.235.0229
CCISCO: 843.238.1338
FAX:
843.238.8337
Hand Tools
Chain Saw
Files-Round
Smooth
• Round shape
• Smooth-cut
• For carded files, weight is
per shelf pack
• 6" files have a straight tang
Cat.
No.
01576
01590
01609
01630
01891
01714
01753
01765
Cooper Hand Tools - Nicholson
Knife Files
Length
Dia.
Cat.
Length
Dia.
(in)
6
6
6
6
8
8
8
8
(in)
1/8
1/8
5/32
5/32
5/32
5/32
3/16
3/16
No.
01798
01876
01888
01964
01974
02082
02150
(in)
8
8
8
8
8
8
8
(in)
13/64
7/32
7/32
1/4
1/4
5/16
3/8
Round shape
Double-cut
European style, design and size
More aggressive sharpening
Cat.
No.
01751
01811
01874
01962
Length
(in)
8
8
8
8
Dia.
(in)
3/16
13/64
7/32
1/4
Crosscut-Great American
• Used for sharpening saws of Great American type and varieties of
crosscut saws
• Rounded back and thin edge are cut
• Same number of teeth per inch as mill bastard files of equivalent length
• Rounded back used to deepen rounded gullets of saw teeth
Cat.
Length
• Single-cut
No.
(in)
02401
02435
02465
6
8
10
Flat Files
• Used by machinists, machinery builders,
ship engine builders, repairman and others who require rapid removal of metal
• Rectangular in cross section and taper
slightly towards point in width
• Double-cut on sides, single-cut on edges
• American pattern, available in bastard,
second and smooth-cut
• Boxed
Bastard
Cut #
06711
06804
06898
06992
07085
Second Smooth Length
Cut #
Cut #
(in)
06742
06773
4
06836
06867
6
06930
06961
8
07023
07054
10
12
Long Angle Lathe Files-Bastard
Chain Saw Files - Round Double Cut
•
•
•
•
• Used primarily by tool and die makers
with work having acute angles
• Double-cut on sides, single-cut on sharp
edge
• Knife files are supplied with safe backs
• Boxed
•
•
•
•
•
•
Rapid, free cutting files designed for lathe filing
Rectangular shape
Single-cut
Safe edges to protect shoulder or dog
Made on flat blanks in bastard-cut
Cut faster than regular mill files and leave smoother finish
Cat.
No.
07657
07688
07719
Length
(in)
10
12
14
Mill Files
•
•
•
•
•
•
•
Used for sharpening mill or circular saws
Also for draw-filing and finishing metals
Rectangular shape
Single-cut on sides and edges
2 square edges
All sizes taper slightly in width
Boxed
Bastard
Cut #
08243
08354
08497
08642
08737
08832
08925
Cut #
Cut #
(in)
08306
4
08385
08416
6
08529
08560
8
08673
08704
10
08768
08799
12
08894
14
16
Round Files
Bastard
Cut #
03367
03467
03566
03665
03764
03863
03980
Cut #
Cut #
(in)
03401
03434
4
03500
03533
6
03599
03632
8
03698
03731
10
03797
03830
12
03896
03929
14
–
–
16
• Primarily used to file circular
openings or concave surfaces
• Round shape
• All 4, 5, 6, 8, 10, 12" files are
single-cut
• 14" bastard file is double-cut
• Tapered slightly toward point
• Boxed
Bastard
Cut #
11526
11637
11716
11904
12019
12134
12248
Cut #
Cut #
(in)
11559
11592
4
11665
5
11748
11781
6
11936
11969
8
12051
12084
10
12166
12199
12
12282
14
Dia.
(in)
1/8
3/16
1/4
5/16
3/8
1/2
5/8
• Used on slots, keyways and general surface filing
• Square shape
Bastard Second Smooth Length
• Double-cut
Cut #
Cut #
Cut #
(in)
• Tapered slightly towards point
12790
12824
12857
4
• Larger sizes frequently preferred
12967
13000
13033
6
to corresponding flat files
13081
13114
13147
8
because of heavier section and
13196
13229
13262
10
4 filing surfaces
13310
13343
13376
12
13425
–
–
14
• Boxed
Dia.
(in)
5/32
1/4
5/16
3/8
1/2
5/8
Square Files
Half Round Files
• Used on concave, convex and flat
Bastard Second
surfaces
Cut #
Cut #
• Rounded on 1 side, flat on opposite
04695
04729
04795
04828
• Backs of all half-round bastard files are
04896
04927
double-cut
04995
05026
• Backs of all half-round second-cut files
05094
05125
longer than 6” are double-cut
05194
05225
• Backs of all 4 and 6” files are single-cut
05190 Pipeliner
• Backs of all half-round smooth files are
05307
–
single-cut
• Flat sides of all half-round files are double-cut
• Pipeliner file (#05190) is single-cut on back and flat sides
Hand Tools
19
Hand Files
•
•
•
•
Rectangular shape
Double-cut
1 safe edge
Same coarseness as flat files of
corresponding lengths
19 -14
Bastard
Cut #
05652
05738
05853
05968
06084
Smooth Length
Cut #
(in)
04762
4
04861
6
04960
8
05059
10
05158
12
05258
14
–
14
–
16
Cut #
Cut #
(in)
05675
05698
4
05771
05804
6
05886
05919
8
06001
06034
10
06117
06150
12
Taper Files-Regular
• Boxed
• Edges set and cut for filing gullets between saw teeth
• Tapers slightly towards the point
Taper Files-Slim
• Boxed
WWW.HANESSUPPLY.COM
Cat.
No.
13727
13750
13772
13807
13841
13875
13930
Cat.
No.
14106
14139
14162
14224
14255
14290
14341
Length
(in)
4
4-1/2
5
6
7
8
10
Length
(in)
4
4-1/2
5
6
7
8
10
Albany/NE Division:
518.438.0139
Rochester Division:
585.235.0160
FAX:
FAX:
FAX:
716.826.4412
518.438.5343 CCISCO: 843.238.1338
585.235.0229
FAX: 843.238.8337
Hand Tools
Taper Files-Extra Slim
Cat.
Length
SWISS PATTERN:
No.
(in)
• Boxed
Taper Files-Double Extra Slim
• Edges set and cut for filing gullets between teeth
• Boxed
Taper Files-Double-Cut
Saw Files (Machine File)
• Designed and recommended primarily
for use in saw filing machines
• Double-cut
Cat.
No.
15334
15395
15418
15460
15481
15524
15545
14547
14579
14599
14665
14698
14729
4
4-1/2
5
6
7
8
Cat.
No.
14942
14992
15024
15056
15087
Length
(in)
4
5
6
7
8
Type
Taper
Slim taper
Slim taper
Extra slim taper
Extra slim taper
Dbl. Extra slim taper
Dbl. Extra slim taper
Length
(in)
6
6
7
6
7
6
7
3-1/2" Die Sinker’s Files
•
•
•
•
Designed for use by die sinkers in dressing and finishing dies of all kinds
Made in 12 shapes
Cat.
Cut
3-1/2", 89mm long
No.
Shape
No. Inch x Inch
Assorted sets of 12 files supplied
35807
–
0 Assorted Set
in plastic pouches
35812
–
2 Assorted Set
Flat
Auriform
Oval (1 sharp edge)
16258
16291
16315
12
Round
Knife (safe back)
35895
Half Round
Flat (2 round edges) (crochet)
35907
Lozenge
Square
•
•
•
•
Used by cabinetmakers and woodworkers
Half-round
Single-cut on edges
Curved side of rasps similar to half-round
rasps but has larger radius
Cat.
No.
17505
Length
(in)
10
Regular
Smooth Length
(second cut) # Cut #
(in)
17615
–
8
17683
17718
10
17751
17786
12
• Used by tool and die makers, jewelers, model
makers and home craftsman
• Made in shapes as illustrated
• Made in approximately 6-1/2" lengths and
in cuts 0, 2 and 4
• Each riffler identified by number
• Assorted sets of 12 files are supplied in
plastic pouches
1
4
5
Wood Rasps-Flat Bastard
Cat.
No.
19136
• Flat shape
• Bastard-cut
Length
(in)
10
6
7
Wood Rasps-Half Round
Used by woodworkers, hobbyists and plumbers
Half-round shape
Single-cut file teeth on edge
For use on wood and soft metals
Boxed
Wood Rasps-Half Round
•
•
•
•
•
Used by woodworkers, hobbyists, and plumbers
Half-round shape
Single-cut file teeth on edge
For use on wood and soft metals
Carded
8
Bastard
Cut #
19361
19394
19427
19460
19493
Second
Cut #
–
19575
19593
19611
–
Length
(in)
6
8
10
12
14
9
11
12
15
Bastard
Cut. #
21878
21749
Length
(in)
8
8
16
18
WWW.HANESSUPPLY.COM
Cat. No.
35961
35966
35971
35976
35982
35988
35994
36000
36006
36012
36018
36024N
36030
36036
36042
36048
36054
36060
36066
36072
36078
36084
36090
36096
36102
36108
36114
36120
36126
36132
36138
36144
36150
36156
36162
36168
36174
36180
36186
0
2
0
2
0
7/32 x 7/64
7/32 x 7/64
17/64 x 7/64
17/64 x 7/64
17/64 x 7/64
2
17/64 x 7/64
0
2
0
2
0
2
0
0
17/64 x 7/64
17/64 x 7/64
1/4 x 3/32
1/4 x 3/32
1/8
1/8
1/4 x 5/64
x 1/64
1/4 x 5/64
x 1/64
9/32 x 7/64
2
9/32 x 7/64
0
2
0
2
0
2
0
2
13/64 x 3/32
13/64 x 3/32
13/64 x 5/32
13/64 x 5/32
1/8
1/8
11/64
11/64
2
Style No. Cut No.
Assorted
0
Assorted
2
Assorted
4
1
0
1
2
1
4
4
0
4
2
4
4
5
0
5
2
5
4
6
0
6
2
6
4
7
0
7
2
7
4
8
0
8
2
8
4
9
0
9
2
9
4
11
0
11
2
11
4
12
0
12
2
12
4
15
0
15
2
15
4
16
0
16
2
16
4
18
0
18
2
18
4
19 -15
19
Hand Tools
•
•
•
•
•
35913
35919
35925
35931
35937
35943
35949
35955
Flat
Flat
Auriform
Auriform
Oval
(1 Sharp Edge)
Oval
(1 Sharp Edge)
Oval
Oval
Half round
Half round
Round
Round
Knife
(Safe back)
Knife
(Safe back)
Flat (crochet)
(2 round edges)
Flat (crochet)
(2 round edges)
Warding
Warding
Lozenge
Lozenge
Square
Square
Three Square
Three Square
6-1/2" Die Skinner’s Rifflers
• Specially coarse teeth for use on wood
• Half-round
• Made in same section and size as half-round file
Cabinet Rasps
35901
Warding
Three Square
AMERICAN PATTERN RASPS:
Wood Files (Coarse)-Half Round
35847
35853
35859
35865
35871
35877
35883
35889
Oval
Three Square Files
• For general use by machinists for filing internal angles more acute than
right angles, clearing out square corners
Bastard Second Smooth Length
and filing taps and gutters
Cut #
Cut #
Cut #
(in)
15803
15825
15848
4
• Double-cut
15925
15958
15991
6
16036
16069
16102
8
• Sharp corners are slightly set and cut
16147
16180
16213
10
• Cut to the point
35817
35823
35829
35835
35841
Albany/NE Division:
518.438.0139
Rochester Division:
585.235.0160
FAX:
FAX:
FAX:
716.826.4412
518.438.5343
585.235.0229
CCISCO: 843.238.1338
FAX:
843.238.8337
Hand Tools
Metal Ferruled Wooden
Needle Files
• Used primarily by jewelers, die makers, watchmakers and fine
Handles
•
•
•
•
•
Hand Tools
19
toolmakers
Available in 12 shapes, round handles
All individual styles shelf pack 12, all assortments of 12, shelf pack 1
Knurled handles
In 4” lengths, oval is furnished instead of crossing
Come with protective plastic pouches when purchased in assortments
Barrette
Half Round
Equaling
Round
Flat
Sitting
Marking
Square
Joint
Three Square
Knife
Crossing
Cat.
Lgth.
No.
(in)
Cut
Assortment
37029
4
0
37035
4
2
Barrette
37277
4
0
37234
4
2
Equaling
37249
4
0
37256
4
2
Flat
37109
4
0
37116
4
2
Half round
37081
4
0
37088
4
2
Joint (2 round edges)
37305
4
0
37312
4
2
Knife (safe back)
37165
4
0
37172
4
2
Marking (safe on flat side)
37361
4
0
37368
4
2
Oval
37137
4
0
37144
4
2
Round
37053
4
0
37060
4
2
Slitting
37333
4
0
37340
4
2
Square
37193
4
0
37200
4
2
Three square
37221
4
0
37228
4
2
Assortment
37392
5-1/2
0
37398
5-1/2
2
37404
5-1/2
4
Barrette
37640
5-1/2
0
37647
5-1/2
2
37654
5-1/2
4
Crossing
37500
5-1/2
0
37507
5-1/2
2
37514
2-1/2
4
19 -16
Cat.
Lgth.
No.
(in)
Cut
Equaling
37612
5-1/2
0
37619
5-1/2
2
37626
5-1/2
4
Flat
37472
5-1/2
0
37479
5-1/2
2
37486
5-1/2
4
Half round
37444
5-1/2
0
37451
5-1/2
2
37458
5-1/2
4
37668
5-1/2
0
37675
5-1/2
2
37682
5-1/2
4
Knife (safe back)
37528
5-1/2
0
37535
5-1/2
2
37542
5-1/2
4
37724
5-1/2
0
37731
5-1/2
2
37738
5-1/2
4
Round
37416
5-1/2
0
37423
5-1/2
2
37430
5-1/2
4
Slitting
37696
5-1/2
0
37703
5-1/2
2
37710
5-1/2
4
Square
37556
5-1/2
0
37563
5-1/2
2
37570
5-1/2
4
Three square
37584
5-1/2
0
37591
5-1/2
2
37598
5-1/2
4
Assortment
37755
6-1/4
0
37761
6-1/4
2
37767
6-1/4
4
37773
6-1/4
6
Barrette
38003
6-1/4
0
38010
6-1/4
2
38017
6-1/4
4
38024
6-1/4
6
Cat.
Lgth.
No.
(in)
Cut
Crossing
37863
6-1/4
0
37870
6-1/4
2
37877
6-1/4
4
37884
6-1/4
6
Equaling
37975
6-1/4
0
37982
6-1/4
2
37989
6-1/4
4
37996
6-1/4
6
Flat
37835
6-1/4
0
37842
6-1/4
2
37849
6-1/4
4
37856
6-1/4
6
Half round
37807
6-1/4
0
37814
6-1/4
2
37821
6-1/4
4
37828
6-1/4
6
38031
6-1/4
0
38038
6-1/4
2
38045
6-1/4
4
38052
6-1/4
6
Knife (safe back)
37891
6-1/4
0
37898
6-1/4
2
37905
6-1/4
4
37912
6-1/4
6
38087
6-1/4
0
38094
6-1/4
2
38101
6-1/4
4
38108
6-1/4
6
Round
37779
6-1/4
0
37786
6-1/4
2
37793
6-1/4
4
37800
6-1/4
6
Slitting
38059
6-1/4
0
38066
6-1/4
2
38073
6-1/4
4
38080
6-1/4
6
Square
37919
6-1/4
0
37926
6-1/4
2
37933
6-1/4
4
37940
6-1/4
6
Three square
37947
6-1/4
0
37954
6-1/4
2
37961
6-1/4
4
37968
6-1/4
6
Cat. No. Handle No. Type
21470
000
21471
00
21476
0
21528
0
E
21485
1
21526
1
D
21494
2
21524
2
C
21503
3
21522
3
B
21511
4
21520
4
A
• Made from seasoned white birch with
nickel-plated ferrules
• Shellac finish
• Handles have strong metal ferrules
Item
Size –
4"
5"
Taper
4
3
Slim
4
4
X Slim
4
4
XX Slim
4
Item
Size – 8 x 3/16 8 x 7/32
Chainsaw
4
4
Item
Size –
4"
6"
Mill
3
2
Flat
3
2
Hand
3
2
Half round
4
3
Warding
3
3
Knife
3
2
Round
4
4
Square
4
4
Cantsaw
–
3
Crosscut
–
–
Tanged horse rasp
–
–
Platers Special
–
–
6"
3
4
4
4
8 x 1/4
4
8"
2
2
1
2
2
2
3
3
2
1
–
–
7"
8"
3
2
4
3
4
4
4
4
8 x 5/16 8 x 3/8
4
3
10"
12"
0
0
0
0
1
0
1
00
1
–
1
0
3
1
2
1
1
–
0
–
–
000
–
–
9"
1
–
–
–
10"
1
2
–
–
14"
00
00
–
000
–
–
0
0
–
–
000
000
File Cleaners
Available in two styles-file card for general cleaning of file teeth and file
card/brush especially for use on finer
cut files
Cat. No. Length (in)
Description
21455
8
File Card #4
21458
10
File Card
21467
10
File Card & Brush
Cooper Hand Tools -
H.K.Porter
HAND OPERATED CUTTERS:
Industrial Grade, Center Cut Cutters
•
•
•
•
•
•
General plant maintenance tool
Drop forged, precision ground, alloy tool steel jaws with center-cut blades
Cuts soft, medium, or hard materials
Maximum hardness of material to be cut: Brinell 455/Rockwell C48
Lockplate keeps jaws from loosening
Toggle joints turn 50-lbs. hand
pressure to 4000 lbs. cutting
pressure
• Screw-type adjustment realigns
edges
• Steel handles with rubber grips
Cat.
No.
1490MC
0090MC
0190MC
0290MC
0390MC
0590MC
Approx.
Soft and Medium Hard
Hard Materials
Wt
Lgth. Materials (Up to Brinell 300, (Up to Brinell 455,
(lbs)
(in)
Rockwell C31) - (in)
2-3/4
14
5/16
3/16
3-1/2
18
3/8
1/4
5-1/4
2
7/16
5/16
8-1/2
30
1/2
3/8
12-7/8 36
9/16
7/16
End View
17-1/8 42
11/16
1/2
WWW.HANESSUPPLY.COM
Albany/NE Division:
518.438.0139
Rochester Division:
585.235.0160
FAX:
FAX:
FAX:
716.826.4412
518.438.5343 CCISCO: 843.238.1338
585.235.0229
FAX: 843.238.8337
Hand Tools
Cooper Hand Tools - H.K.Porter
General Purpose Center Cut Bolt Cutters
Heavy Duty Cutters
• Series 2000 Bolt Cutter
• Drop-forged jaws with center-cut blades. Heat-treated for wear
resistance and long cutting life
• Cuts soft, and medium/hard materials
• Maximum hardness of material to be cut: Brinell 300/Rockwell
C31
• Toggle joints turn 50-lbs.
hand pressure to 4000 lbs.
of cutting pressure
• Precision cast, 1-piece,
aluminum alloy handles with rubber grips
Approx.
Soft Materials
Wt
Lgth. (Up to Brinell 200,
(lbs)
(in) Rockwell C15) - (in)
1.7
14
5/16
2.4
18
3/8
4
24
7/16
Cat.
No.
1490AC
0090AC
0190AC
Hard Materials
(Up to Brinell 300,
1/4
5/16
3/8
• Recommended for the most demanding hand cutting applications
• Heavy-duty straps support the jaws
• Maximum hardness of material to be cut:
Brinell 455/Rockwell C48
• Lockplate keeps jaws from loosening
• Toggle joints turn 50 lbs. hand pressure to 4000 lbs. cutting pressure
• Screw-type adjustment realigns edges
• Available with
Approx.
Hard Metal, Wire Mesh
tubular steel or
Cat.
Wt.
Lgth.
& Reinforcing
lightweight,
No.
(lbs)
(in)
Rod & Bar
fiberglass
0190MCX 5-1/2
24
5/16
handles
0290MCX 9-1/4
30
3/8
End
View
0390MCX
0590MCX
Hard Materials
Lgth. Materials (Up to Brinell 200, (Up to Brinell 300,
(in)
14
5/16
1/4
18
3/8
5/16
24
7/16
3/8
30
1/2
7/16
36
9/16
1/2
42
11/16
9/16
Cat.
Approx.
No.
Wt. (lbs)
0190ME
5-3/8
• All-purpose jaws with center-cut blades
• Cuts soft, medium and hard metals
• Maximum hardness of material to be cut: Brinell 455/Rockwell C48
• Toggle joints turn 50-lbs. hand pressure to 4000 lbs. cutting pressure
• Screw-type adjustment
realigns edges
• Strong, lightweight fiberglass
handles
• Popular cutter
Cat.
No.
0090FC
0190FC
0290FC
0390FC
Lgth.
(in)
18-1/4
24-1/2
30-1/2
36-1/2
End View
Hard Materials
Materials (Up to Brinell 300, (Up to Brinell 455,
3/8
1/4
7/16
5/16
1/2
3/8
9/16
7/16
End
View
Angular Style Cutters
End View
Power and Communications Cable Cutters
• Lightweight, rugged cutter
• Drop-forged, alloy tool steel jaws with shear-cut blades
• Cuts copper or aluminum,
power and communications
cable
• Fiberglass handles for
2-handed control
Cat.
No.
0290FCS
0390FCS
Approx.
Copper Aluminum Communications
Wt.
Lgth.
Power
Power
Cable
(lbs)
(in)
Cable
Cable
(in)
4-1/2 25-1/2 500 MCM 750MCM
1-3/8
6
32
750MCM 1200MCM
1-3/4
End
View
Shear Type Cable Cutters
• For Wire Rope to 3/4"
• Notched, shear-cut blades hold and lock cable in cutting position
• Cuts steel cable, coarse-or fine-stranded cable,
or wire rope with minimal distortion
• Toggle joints turn 50-lbs. hand
pressure
Cat.
No.
1490MTN
0190MTN
0390MTN
0590MTN
Approx.
Wire Hard Stainless Aircraft
Wt. Lgth. Rope Steel Cable Cable
(lbs)
(in) (in)
(in)
(in)
2-3/4
14
1/4
1/4
1/4
5
24
3/8
3/8
3/8
12
36
5/8
5/8
5/8
17
42
3/4
3/4
3/4
End
View
19
Hand Tools
• For soft and medium hard metals to 1/2"
• Angular-style jaws with clipper-cut blades, have a 30-degree offset to
keep work in view and hands clear
of work surface while cutting
• Cuts soft and medium materials
• Maximum hardness of material to
be cut: Brinell 300/Rockwell C31
Approx.
Soft Steel & Non-Ferrous Medium Hard Metals
Cat.
Wt.
Lgth. Metals Up to Brinell 200, Up to Brinell 300,
No.
(lbs)
(in)
Rockwell C15 (in)
Rockwell C31 (in)
1490MAF
3
14
5/16
1/4
0190MA
5-1/2
24
7/16
3/8
0390MA
13-1/8 36
9/16
1/2
End
View
Lgth.
Soft Steel, NonWrought
(in) Ferrous Material (in) Iron (in)
24
5/16
5/16
Shear Type Hand Operated Cutters
End
View
General Purpose, Center Cut Cutters
Approx.
Wt
(lbs)
3-1/2
4-1/2
7-1/2
11-1/2
7/16
1/2
• End-cut blades are at right angles to handles for easier handling and
head-on, close cutting in confined spaces
• Cuts soft materials
• Maximum hardness of material to be cut: Brinell 200/Rockwell C15
• Toggle joints turn 50-lbs. hand
pressure
• Screw-type adjustment realigns
edges
• Cutterhead available for 9190E Pneumatic cutter
• All-purpose jaws with clipper-cut blades for close or flush cutting
• Not for cutting hard materials
• Maximum hardness of
material to be cut: Brinell
300/Rockwell C31
• Lockplate keeps jaws from
loosening
• Toggle joints turn 50-lbs. hand pressure
to 4000 lbs. cutting pressure
Cat.
No.
1490MNE
0090MNE
0190MNE
0290MNE
0390MNE
0590MNE
36
42
End Cut Nipper
Industrial Grade, Clipper Cut Cutters
Approx.
Wt
(lbs)
2-3/4
3-1/2
5-1/4
8-1/2
12-7/8
17-1/8
14-1/8
18-1/4
“B” Strand Cutter
• Support cable only up to 5/16"
• Notched, shear-cut blades hold and lock cable in cutting position
• Cuts self-supporting steel cable and
coarse or fine-stranded cable with
minimal distortion
Cat.
Approx.
No
Wt. (lbs)
0190MTQ
5
WWW.HANESSUPPLY.COM
Lgth.
(in)
24
Cap.
(in)
5/16
19 -17
Albany/NE Division:
518.438.0139
Rochester Division:
585.235.0160
FAX:
FAX:
FAX:
716.826.4412
518.438.5343
585.235.0229
CCISCO: 843.238.1338
FAX:
843.238.8337
Hand Tools
Cooper Hand Tools Compact, Electric Cable Cutter
Lgth.
(in)
8-1/4
9-1/2
Professional (260/200 Watts)
• Professional heavy-duty gun
• Pistol grip design
• Fingertip trigger selects high (1st trigger
position) or low output (2nd trigger position)
• Ready to use in 6 seconds
• Heavy gauge, high efficiency, tin-plated cooper tip
• Twin lights illuminate work
• 2-wire cord (D5503 has a 3-wire cord)
• Helpful hints and instructions on packaging
• Instruction booklet included
• UL and CUL listed
• High-leverage jaws with shear-cut
blades
• Do NOT cut steel or ACSR
• Plastic covered, non-slip grips
• Compact cutter fits into most tool
pouches
• NOT an insulated tool
• Blister packed for easy point-ofpurchase display
Cat.
Approx.
No.
Wt. (lbs)
0690CSJ
3/4
0890CSJ
1
H.K.Porter & Weller
Copper Aluminum
Cable
Cable
1/0
3/0
2/0
4/0
Cat. No.
Description
D550
Soldering gun
D5503 Soldering gun 3-wire
8250D
Soldering gun
Steel Strap Cutter
•
•
•
•
•
•
For Strap to 3/4"
Sheer-cut blades give clean, smooth, easy cuts
Lower jaw slides under the tightest strapping staple
Workhead has black oxide, rust-resistant finish
Cuts steel strap up to 3/4" wide
Spring action handles with Plastisol®
grips open jaws automatically before
and after each cut
• HKP’s most popular strap cutter model
Cat.
No.
0990T
Approx.
Wt. Lgth.
(lbs)
(in)
1
9
Marksman® Mini Iron (12 Watt)
•
•
•
•
•
•
•
Flat Steel Round Steel
Strap
Tie Wire
(in)
(in)
3/4 x .035
.080
Cat. No. Description Volts
SP12
Soldering iron 120
•
•
•
•
Cuts Steel Strap up to 1-1/4"
Sheer-cut blades
Workhead has black oxide, rust-resistant finish
1-handed operation gives extra leverage for continuous cuts of wide
steel strap, quickly and cleanly
• Cushion grip handles
Cat.
Approx. Lgth. Flat Steel
No.
Wt. (lbs) (in) Strap (in)
1290G
1-1/2
12 1-1/4 x .050
Heavy-Duty, Steel Strap Cutter
Cooper Hand Tools - Weller
SOLDERING GUNS/IRONS:
Universal (140/100 Watts)
Hand Tools
• Universal all-purpose gun
• Pistol grip design
• Fingertip trigger selects high (1st trigger position) or low output
(2nd trigger position)
• Ready to use in 6 seconds
• High efficiency, tin-plated copper tip
• Light illuminates work
• 2-wire cord (82003 has a 3-wire cord)
• Helpful hints and instructions on packaging
• Instruction booklet included
• UL and CUL listed
19 -18
•
•
•
•
•
•
•
•
•
Fine quality consumer mini iron
8-1/4" long
Featherweight iron with pencil handle
Ideal for hobbies, kits, radios, and electronics work
Includes MT1 1/8" diameter replaceable nickel-plated copper tip
Develops 750-degrees Farenheit/400-degrees Celsius
Stainless steel barrel and heat and impact resistant handle
UL listed
CUL listed model available
Volt
120
220/240
IMPORTANT: Use only Weller® tips. Use of nonWeller® components may void product warranty if the
non-Weller® component causes damage to the unit.
Marksman® Iron (40 Watt)
Cat.
Approx. Lgth. Flat Steel
No.
Wt. (lbs) (in) Strap (in)
2690GP
7
24
2 x .050
Volts
120
120
240
IMPORTANT: Use only Weller® tips. Use of non-Weller®
components may void product warranty if the non-Weller®
component causes damage to the unit
Cat. No. Description
SP23
Soldering iron
SP25D
Soldering iron
• Sheer-cut blades
• Cuts heavy steel strapping up to 2"
• Excellent for pallets, loading and
unloading freight cars, trucks,
and ships
• Long-handled, goose neck, 2-hand operated cutter
• Keep hands away from cutting area
Cat. No.
Description
8200
Soldering gun
82003 Soldering gun 3-wire
8200D
Soldering gun
7" long
Lightweight and pencil thin
Ideal for fine soldering and hobby work such as electronic kits, model
railways and jewelry making
Replaceable nickelplated copper tip
Stainless steel barrel
Heat and impact resistant handle
UL listed
•
Steel Strap Cutters
19
Volts
120
120
240
•
•
•
•
•
•
•
•
•
8-1/4" long
Lightweight pencil iron
Ideal for hobbies
MT10 1/4" diameter replaceable nickel-plated copper tip
Develops 900-degrees farenheit/482-degrees Celsius
UL listed
Cat. No.
Description
SP40
Soldering iron
SP40D Soldering iron
Volt
120
220/240
IMPORTANT: Use only Weller® tips. Use of nonWeller® components may void product warranty if the
non-Weller® component causes damage to the unit.
•
•
•
•
•
•
•
•
•
Fine quality, consumer medium-duty iron
9-3/4" long
Ideal for hobby work, stained glass and minor repairs
Soldering iron rest included
MTG20 3/8" diameter replaceable iron-plated copper tip
UL listed
Volts
SP80
Soldering iron
120
SP80D Soldering iron 220/240
WWW.HANESSUPPLY.COM
Albany/NE Division:
518.438.0139
Rochester Division:
585.235.0160
FAX:
FAX:
FAX:
716.826.4412
518.438.5343 CCISCO: 843.238.1338
585.235.0229
FAX: 843.238.8337
Hand Tools
Cooper Hand Tools -
Weller & Wiss
Marksman Iron (120 Watt)
Metalmaster® Offset Snips
•
•
•
•
•
•
•
•
•
•
•
•
•
®
Fine quality, heavy-duty iron
11-3/8" long
Ideal for home workshop, repairs, stained glass and hobbies
MTG30 1/2" diameter replaceable iron-plated copper tip
UL listed
Volts
SP120 Soldering iron
120
SP120D Soldering iron 220/240
Marksman® Iron (175 Watts)
•
•
•
•
•
•
•
•
•
Fine quality heavy-duty consumer iron
12-1/2" long
Extra heavy-duty for demanding jobs like sheet metal work
MTG40 5/8” diameter replaceable iron-plated copper tip
UL listed
Cat. No.
SP175
SP175D
Description
Soldering iron
Soldering iron
Volts
120
240
components may void product warranty if the nonWeller® component causes damage to the unit
Cooper Hand Tools - Wiss
SNIPS:
Metalmaster® Compound Action Snips
• Non-slip serrated jaws of Weiss® Metalmaster® snips are made of extra
tough, wear-resistant molybdenum steel to provide extra service
demanded by the compound lever action
• Withstands severe strain of cutting heavy stock & tight curves
• Handles are formed of high strength steel
• Handles have a margin of strength far above the limit of hand power that
can be extended
Metalmaster®
Compound Action
Snips
M1R
• Left cut, cuts left from tight
curves to straight (MR1)
• Right cut cuts right from tight
curves to straight (MR2)
Cat. Grip Lgth.
Snip
Recommended max. cap.
No.
color (in) Lgth. (in) low carbon cold rolled steel
M1R Red 9-3/4 1-3/8
18 Gauge Steel 0.049"
M2R Green 9-3/4 1-3/8
Snip
Lgth. (in) low carbon cold rolled steel
1-1/2
Metalmaster® Special Series Snips
•
•
•
•
M1RS1 cuts left
M2RS1 cuts right
Specially hardened to cut exotic metals
Non-slip serrated jaw of tough molybdenum steel allows for compound
lever action
• Withstands strain of cutting heavy stock and tight curves
• Spring-action for fast, effortless feed
• Handle of high tensile strength alloy steel
exceeds hand power limit
• Handy hang-up hole
• Non-slip, textured grips and safety
latch for superior control
Cat.
No.
M1RS1
M2RS1
Grip
color
Blue
Blue
Lgth.
Snip
(in) Lgth. (in) low carbon cold rolled steel
9-3/4
1-3/8
18 Gauge Stainless Steel 0.049"
9-3/4
1-3/8
Metalmaster® Pipe & Duct Snips
• Cuts curves, straight or any combination
• Cuts any shape ducts, seams, sheet metal stock, vinyl tiles & plastic
laminates
• Non-slip serrated jaw of tough molybdenum steel allows for compound
lever action
• Patented ball-bearing jaw action automatically adjusts blade clearance
for squarer, cleaner cuts
• Handle of high tensile strength alloy
steel exceeds hand power limit
• Non-slip, textured grips and
safety latch for superior
control
Grip Lgth.
Snip
color (in) Lgth. (in) low carbon cold rolled steel
Yellow 9-1/4
9/16
• Combines the long cut of tinners snips with the
strength of compound action
• Compound action multiplies the
force of the hand by five times
• Great for making long, fast cuts
in several types of material
including: paper, plastic, sheet metal, aluminum,
vinyl sliding, screening and much more
• Cuts up to 20 gauge steel
• Features non-slip, serrated jaws as well as non-slip textured grips
Cat.
No.
M300
Lgth.
(in)
10-1/2
Snip
3
WWW.HANESSUPPLY.COM
19 -19
19
Hand Tools
Cat. Grip Lgth.
No.
color (in)
M3R Yellow 9-3/4
Snip
1-1/4
1-1/4
Multimaster® Snips
Metalmaster Compound Action Snips
• Cuts straight, left or right in
light stock
• Perfect for home craftsman
Cat. Grip Lgth.
No.
color (in)
M6R Red 9-1/4
M7R Green 9-1/4
Cat.
No.
M41R
M2R
®
M6R cuts left and straight
M7R cuts right and straight
Offset blades keep hands clear of metal
Non-slip serrated jaw of tough molybdenum steel allows for compound
lever action
• Withstands strain of cutting heavy stock and tight curves
• Handle of high tensile strength alloy steel
exceeds hand power limit
• Handy hang-up hole
• Non-slip, textured grips
and safety latch for superior
control
Albany/NE Division:
518.438.0139
Rochester Division:
585.235.0160
FAX:
FAX:
FAX:
716.826.4412
518.438.5343
585.235.0229
CCISCO: 843.238.1338
FAX:
843.238.8337
Hand Tools
Eklind®
Fold-Up Hex Key Sets
Eklind®
Ball-Hex-L
TM
Five inch sets & three metric sets are available, covering the full range of inch & metric sizes. Each set of
keys is housed in a one-piece comfort grip handle which
is designed to operate smoothly, as well as hold the
keys firmly in any desired work position.
Hex Inch Sets
Key Sets
These Ball-Hex-LTM Keys are designed with a ball profile on
the long arm. This feature provides 360 degrees of rotation
at up to a 30 degree angle. The blurr-free short arm allows
the user to apply maximum torque in required applications.
Four inch sets and two metric sets are available. These sets
come in compact molded plastic holders that firmly retain
each key in size marked holes. Key holders
are color-coded, red for inch & blue for metric
sizes.
Item
No.
20811
20912
20911
20812
20511
Inch Sets
Item
No.
13207
13211
13212
13213
Series
Long
Long
Long
Long
Hex Metric Sets
No.
Key Sizes (in)
of
Keys .050 1/16 5/64 3/32 7/64 1/8 9/64 5/32 3/16 7/32 1/4 5/16 3/8
7
11
12
13
No.
of
Keys
7
9
Key Sizes (mm)
1.5
2.0
2.5
3.0
4.0
5.0
Handle No.
Item
Size
of
No.
(in)
Keys 1.5
21171 3.63 (S)
7
21172 4.25 (M) 7
21151 5.25 (L)
6
Key Sizes (mm)
2.0
2.5
3.0
4.0
5.0
6.0
8.0
10.0
Fold-A-Ball Sets
Metric Sets
Item
No. Series
13607 Long
13609 Long
Handle No.
Key Sizes (in)
Size
of
(in) Keys .050 1/16 5/64 3/32 7/64 1/8 9/64 5/32 3/16 7/32 1/4 5/16 3/8
3.00 (S) 8
3.63 (S) 9
4.25 (M) 9
5.25 (L) 8
5.25 (L) 5
6.0
8.0
10.0
Hex-L® Key Sets
Three inch sizes & two metric sizes round out this versatile tool which allows 360 degrees of rotation at up to
a 25 degree angle. Each set of keys is housed in a onepiece comfort grip handle which is designed to operate
smoothly, as well as hold the keys firmly in any desired
work position.
Ball-End Inch Sets
Handle No.
Key Sizes (in)
Item
Size
of
No.
(in) Keys .050 1/16 5/64 3/32 7/64 1/8 9/64 5/32 3/16 7/32 1/4 5/16 3/8
20719 3.00 (S) 7
20919 4.25 (M) 9
20519 5.25 (L) 5
Seven inch sets & four metric sets are available in
short & long arm series. These sets come in compact
molded plastic holders that firmly retain each key in
size marked holes. Key holders are color-coded, red
for inch sizes & blue for metric sizes.
Ball-End Metric Sets
Handle No.
Item
Size
of
No.
(in)
Keys 1.5
21158 3.00 (S)
5
21159 5.25 (L)
5
Hex-L® Inch Sets in Moulded Plastic Holders
Item
No.
10107
10111
10113
10207
10211
10213
10018
Series
Short
Short
Short
Long
Long
Long
Short
Long
No.
Key Sizes (in)
of
Keys .050 1/16 5/64 3/32 7/64 1/8 9/64 5/32 3/16 7/32 1/4 5/16 3/8
7
11
13
7
11
13
9
9
Hex-L® Metric Sets in Moulded Plastic Holders
Item
No.
10507
10509
10607
10609
Series
Short
Short
Long
Long
Hand Tools
19
No.
of
Keys
7
9
7
9
2.0
2.5
3.0
4.0
2.0
2.5
3.0
4.0
5.0
6.0
8.0
Cushion Grip Hex T-Key Sets
These Hex T-Keys feature a one piece loop handle
for extra strength which is vinyl coated to reduce
hand fatigue. Pouch sets or bench sets with metal
stands are available in 6" & 9" arm lengths and in
inch or metric sizes.
Cushion Grip Inch Sets
Key Sizes (mm)
1.5
Key Sizes (mm)
5.0
6.0
8.0
10.0
Arm
No.
Key Sizes (in)
Item
Lgth.
of
No.
(in) Keys 3/32 7/64 1/8 9/64 5/32 3/16 7/32 1/4 5/16 3/8
Sets in Pouches
53610
6
10
53910
9
10
53168
6
8
53198
9
8
Sets in Stands
50160
6
10
50190
9
10
Cushion Grip Metric Sets
Arm
Item
Lgth.
No.
(in)
Sets in Pouches
55168
6
55198
9
55166
6
55196
9
Sets in Stands
56168
6
56198
9
19 -20
No.
of
Keys
8
8
6
6
8
8
WWW.HANESSUPPLY.COM
Key Sizes (mm)
2.0
2.5
3.0
4.0
5.0
6.0
8.0
10.0
10.0
Albany/NE Division:
518.438.0139
Rochester Division:
585.235.0160
FAX:
FAX:
FAX:
716.826.4412
518.438.5343 CCISCO: 843.238.1338
585.235.0229
FAX: 843.238.8337
Hand Tools
Eklind
®
Torx®-L Keys
Standard Grip Hex T-Key Sets
Featuring our one piece loop handle construction for
extra strength. Pouch sets or bench sets with metal
stands are available in 6" & 9" arm lengths & in inch
or metric sizes.
Hex
Size
A
T5
T6
T7
T8
T9
T10
T15
T20
T25
T27
T30
T40
T45
T50
T55
T60
Cushion Grip Inch Sets
Arm
No.
Key Sizes (in)
Item
Lgth.
of
No.
(in) Keys 3/32 7/64 1/8 9/64 5/32 3/16 7/32 1/4 5/16 3/8
Sets in Pouches
33610
6
10
33910
9
10
33168
6
8
33198
9
8
Sets in Stands
30160
6
10
30190
9
10
Short
Arm
(in) C
0.532
0.46
0.51
0.56
0.61
0.66
0.71
0.75
0.80
0.85
0.94
1.03
1.13
1.25
1.38
1.63
Short Series
Item Long Arm
No.
(in) B
15805
1.30
15806
1.59
15807
1.64
15808
1.74
15809
1.88
15810
2.00
15815
2.13
15820
2.25
15825
2.38
15827
2.50
15830
2.75
15840
3.00
15845
3.25
15850
3.75
15855
4.25
15860
5.25
Ball-Hex-LTM Keys
Inch Sizes
Individuall Hex-L® Keys
Inch Sizes
Hex
Size
A
.028
.035
.050
1/16
5/64
3/32
7/64
1/8
9/64
5/32
3/16
7/32
1/4
5/16
3/8
7/16
1/2
9/16
5/8
3/4
7/8
1
Short
Arm
(in) C
0.22
0.34
0.53
0.56
0.61
0.66
0.70
0.75
0.80
0.84
0.94
1.03
1.12
1.25
1.38
1.50
1.63
1.75
1.88
2.13
2.38
2.63
Short Series
Item Long Arm
No.
(in) B
15101
1.22
15102
1.22
15103
1.66
15104
1.75
15105
1.88
15106
2.00
15107
2.12
15108
2.25
15109
2.38
15110
2.50
15112
2.75
15114
3.00
15116
3.25
15120
3.75
15124
4.25
15128
4.75
15132
5.25
15136
5.75
15140
6.25
15148
7.25
15156
8.25
15164
9.25
Long Series
6" Series 12" Series
Item Long Arm
Item
Item
No.
(in) B
No.
No.
–
–
–
–
15202
2.67
–
–
15203
2.84
–
–
15204
3.00
–
–
15205
3.19
15305
15405
15206
3.38
15306
15406
15207
3.56
15307
–
15208
3.75
15308
15408
15209
3.94
15309
–
15210
4.12
15310
15410
15212
4.50
15312
15412
15214
4.88
14314
15414
15216
5.25
15316
15416
15220
6.00
15320
–
15224
6.75
15324
–
15228
7.50
–
–
15232
8.25
–
–
15236
9.00
–
–
15240
9.75
–
–
15248
11.25
–
–
15256
12.75
–
–
–
15264
14.25
–
Metric Sizes
Short
Arm
(in) C
0.22
0.34
0.53
0.53
0.61
0.69
0.75
0.94
1.06
1.22
1.34
1.38
1.46
1.54
1.73
2.15
2.42
2.72
3.07
4.37
Short Series
Item Long Arm
No.
(in) B
15500
1.22
15501
1.22
15502
1.63
15503
1.73
15504
1.93
15505
2.15
15506
2.42
15508
2.68
15510
3.08
15512
3.46
15514
3.74
15516
3.84
15518
4.07
15520
4.29
15524
4.80
15528
5.37
15534
6.14
15538
6.91
11544
7.68
15548
9.25
Long Series
Item Long Arm
No.
(in) B
15601
15602
15603
15604
15605
15606
15608
15610
15612
15614
15616
15618
15620
15624
15628
15634
15638
15644
15648
2.67
2.84
3.03
3.19
3.48
3.88
4.09
4.57
5.43
5.82
6.20
6.39
6.58
8.23
9.15
9.69
10.85
12.99
14.78
C
B
Hex
Size
A
.050
1/16
5/64
3/32
7/64
1/8
9/64
5/32
3/16
7/32
1/4
5/16
3/8
7/16
1/2
9/16
5/8
3/4
Short
Arm
(in) C
0.53
0.56
0.61
0.66
0.70
0.75
0.80
0.84
0.94
1.03
1.12
1.25
1.38
1.50
1.63
1.75
1.88
2.13
Metric Sizes
Short Series
Item Long Arm
No.
(in) B
18203
2.84
18204
3.00
18205
3.19
18206
3.38
18207
3.56
18208
3.75
18209
3.94
18210
4.12
18212
4.50
18214
4.88
18216
5.25
18220
6.00
18224
6.75
18228
7.50
18232
8.25
18236
9.00
18240
9.75
18248 11.25
Hex
Size
A
1.3
1.5
2.0
2.5
3.0
4.0
5.0
6.0
7.0
8.0
9.0
10.0
12.0
14.0
17.0
19.0
Short
Arm
(in) C
0.53
0.53
0.61
0.69
0.75
0.94
1.06
1.22
1.38
1.38
1.54
1.54
1.73
2.15
2.42
2.70
Short Series
Item Long Arm
No.
(in) B
18602
2.84
18603
3.03
18604
3.19
18605
3.48
18606
3.88
18608
4.09
18610
4.57
18612
5.43
18614
6.20
18616
6.20
18618
6.58
18620
6.58
18624
8.23
18628
9.15
18634
9.69
18638
10.85
Individual Hex T-Keys
Inch Sizes
Cushion Grip
Standard Grip
Hex Handle
Size Width 9" Series 6" Series 9" Series 6" Series 3" Series
A
(in) C Item No. Item No. Item No. Item No. Item No.
5/64
3.00
51905
51605
31905
31605
31305
3/32
3.00
51906
51606
31906
31606
31306
7/64
3.00
51907
51607
31907
31607
31307
1/8
3.00
51908
51608
31908
31608
31308
9/64
3.00
51909
51609
31909
31609
31309
5/32
3.00
51910
51610
31910
31610
31310
3/16
4.00
51912
51612
31912
31612
31312
7/32
4.00
51914
51614
31914
31614
31314
1/4
4.00
51916
51616
31916
31616
31316
5/16
6.00
51920
51620
31920
31620
31320
3/8
6.00
51924
51624
31924
31624
–
C
B
A
Metric Sizes
A
Cushion Grip
Standard Grip
Hex Handle
Size Width 9" Series 6" Series 9" Series 6" Series 3" Series
A
(in) C Item No. Item No. Item No. Item No. Item No.
2.0
3.00
54920
54620
34920
34620
–
2.5
3.00
54925
54625
34925
34625
–
3.0
3.00
54930
34630
34930
34630
–
4.0
3.00
54940
54640
34940
34640
–
5.0
4.00
54950
54650
34950
34650
–
6.0
4.00
54960
54660
34960
34660
–
8.0
6.00
54980
54680
34980
34680
–
10.0
6.00
54990
54690
34990
34690
–
WWW.HANESSUPPLY.COM
19
Hand Tools
Hex
Size
A
0.7
0.9
1.3
1.5
2.0
2.5
3.0
4.0
5.0
6.0
7.0
8.0
9.0
10.0
12.0
14.0
17.0
19.0
22.0
24.0
Long Series
Item Long Arm
No.
(in) B
15905
2.40
15906
2.77
15907
2.82
15908
2.99
15909
3.19
15910
3.38
15915
3.57
15920
3.75
15925
3.94
15927
4.13
15930
4.50
15940
4.88
15945
5.25
15950
6.00
15955
6.75
15960
8.25
19 -21
Albany/NE Division:
518.438.0139
Rochester Division:
585.235.0160
FAX:
FAX:
FAX:
716.826.4412
518.438.5343
585.235.0229
CCISCO: 843.238.1338
FAX:
843.238.8337
Hand Tools
Eklind®
Screw Charts
UnitekTM Aluminum Level 18", 24", 36", 48", 72"
Inch Sizes
Cap Screws
Socket
Head
Flat
1960
Head
Socket
Head
1936
Button Low
Head Head
Hex
Size
A
.028
.035
0
.050
0,1
0
1,2
1/16
2
1
3,4
5/64
3,4
2,3
5,6
3/32
5,6
4,5
8
7/64
6
1/8
8
10
9/64
10
8
5/32
1/4
10
1/4
3/16
1/4
1/4
5/16
7/32
5/16
3/8
1/4
5/16
7/16
5/16
3/8,7/16
3/8
1/2
3/8
1/2
7/16,1/2
5/8
7/16
1/2
5/8
5/8
3/4
9/16
3/4,7/8
7/8
5/8
1
3/4
1
3/4 1-1/8,1-1/4,1-3/8
7/8,1
1-1/8
7/8
1-1/8,1-1/4 1-1/4, 1-3/8
1
1-1/2
1-3/8,1-1/2
1-1/2
Set
Screws
PresShoulders sure
Screws Plugs
4
5,6
8
10
0
1,2
3,4
5,6
8
10
10
1/4
1/4
1/4
1/4
5/16
3/8
5/16
3/8
7/16
1/2
5/8
5/16
3/8
7/16
1/2
5/8
3/4
5/16
3/8
1/16
1/8
1/2
5/8
3/4
1/4
3/8
1/2
7/8
1,1-1/8
1
1-1/4,1-3/8
1-1/4
1-1/2
1-3/4,2
Metric Sizes
Cap Screws
Socket
Head
1960
Flat Button Low
Head Head Head
Hex
Size
A
0.7
0.9
1.3
1.4
1.5 1.6 - 2.0
2.0 2.3 - 2.6
3
2.5
3
4
3.0
4
5
4.0
5
6
5.0
6
8
6.0
8
10
8.0
10
12
10.0
12
14, 16
12.0
14
20
14.0
16
17.0
20
19.0
24
Set Shoulders
Screws Screws
1-1/2
1-3/4
Solid I-beam frame
Replaceable acrylic vials
Top reading window
Precision ground edges
assure accuracy
• Beveled end plates protect from shock
Item
Vial
UPC
No.
Code No.
580-18
D 58017-6
580-18VP
E 58018-3
580-24
D 58024-4
580-24PRO H 58026-8
580-36
D 58036-7
580-48
D 58048-0
580-72
G 58072-5
0
1,2
3,4
5,6
8
1/2
5/8
•
•
•
•
3/4
1
1-1/4
1-1/2,2
Inner Pack
lbs.
Qty.
1.9
2
1.9
2
2.4
2
2.4
2
3.4
2
4.5
2
3.9
1
Outer Pack
Qty. Cu. Ft.
.06
.06
10
.52
10
.52
.13
10
.90
.38
Magnetic UnitekTM Aluminum Level
18", 24", 36", 48", 72"
• Magnetic edge holds to ferrous surfaces
• Top reading window
• Replaceable acrylic
vials
• Advanced frame design assures accuracy
Item
No.
581-18
581-24
581-36
581-48
581-72
Vial
Code
F
F
D
D
G
UPC
No.
58118-0
58124-1
58136-4
58148-7
58172-2
Inner Pack
lbs.
Qty.
2.3
2
2.8
2
4.0
2
5.4
2
4.6
1
Outer Pack
Qty. Cu. Ft.
.06
10
.52
.13
10
.18
.38
Magnetic Master ContractorTM Level 24", 48", 78"
3
4
5
6
8
10
12
4
5
6
8
10
12
14
16
22
24
1.4 - 1.7
2, 2.3
2.5, 2.6
3
4
5
6
8
10
12, 14
16
20
24
•
•
•
•
•
4
5
6
8
10
14
Gold anodized frame for 24" and 48" levels
Strong magnetic edge holds to ferrous surfaces
Acrylic vials are replaceable
Heavy-duty I-beam frame with top read window
Beveled end plates protect from shock
Item
No.
881-24
881-48
881-78*
890/68
891/68
16
20
Vial
Code
F
D
G
D
D
UPC
No.
88124-2
88148-8
88178-5
89068-8
89168-5
Inner Pack
lbs.
Qty.
1.8
2
3.3
2
5.6
1
40.0
10
25.2
6
Outer Pack
Qty. Cu. Ft.
.08
.16
.40
3.2
2.1
Lifetime Warranty
*Level has black
anodized frame
Magnum Level 24", 48"
Empire
Speed Level 24", 36", 48"
• Three acrylic vials
• Triangular frame design to measure and level simultaneously
• Large, easy to read numbers and graduations
• Ideal for wallpapering, shelving, for use as cutting guide
Hand Tools
19
Item
No.
450-24
450-36
450-48
19 -22
Vial
Code
D
D
D
UPC
No.
45024-0
45036-3
45048-6
Inner Pack
lbs.
Qty.
6.5
6
6.3
4
12.3
6
•
•
•
•
•
Replaces any wood level
Full sized hand holes-20% larger
Aluminum reinforced frame will not warp
Full-travel 2" MAGNUM level vial for easy reading
Replaceable lenses
and vials
Item
No.
944-24
944-48
944/68
Vial
Code
D
D
D
UPC
No.
94424-4
94448-0
94468-8
Outer Pack
Qty. Cu. Ft.
.22
.26
.45
WWW.HANESSUPPLY.COM
Inner Pack
lbs.
Qty.
2.5
1
4.8
1
35.4
6
Outer Pack
Qty. Cu. Ft.
.03
.07
2.1
Lifetime Warranty
Albany/NE Division:
518.438.0139
Rochester Division:
585.235.0160
FAX:
FAX:
FAX:
716.826.4412
518.438.5343 CCISCO: 843.238.1338
585.235.0229
FAX: 843.238.8337
Hand Tools
Empire
TM
Titan
Box Levels
Top GunTM Magnetic Laser Torpedo Level
• Heavy-duty frame with reinforcing center strut maximizes frame
durability. Tool won't twist or bend under normal use.
• Oversized hand holes for sure-handed carrying.
• Shatter resistant acrylic level vial provides 300-degree viewing,
maximizes readings from any angle.
• Bright yellow finish is extremely durable and makes tool easy to see.
• Rubberized anti-slip end plates absorb shock.
• 980-24 model features
2 vials.
• Bright Yellow Color
with Hand Holes
Item
No.
980-02
980-04
980-24
980-48
980-72
Vial
Code
D
D
J
D
D
UPC
No.
98002-0
98004-4
98024-2
98048-8
98072-3
Inner Pack
lbs.
Qty.
1.73
1
3.46
1
1.73
1
3.46
1
5.19
1
Outer Pack
Qty. Cu. Ft.
.05
.09
.05
.09
.38
Item
No.
971-02
• Mahogany frame with brass bound edges
• Six vials protected by
crystal glass lenses
UPC
No.
99024-1
99048-7
Inner Pack
lbs.
Qty.
1.9
1
3.6
1
Outer Pack
Qty. Cu. Ft.
.06
.12
UPC
No.
98124-9
98148-5
Inner Pack
lbs.
Qty.
2.00
1
3.75
1
Outer Pack
Qty. Cu. Ft.
.05
.09
Inner Pack
lbs.
Qty.
3.4
1
Outer Pack
Qty. Cu. Ft.
–
.30
• Used to attach the TOP GUN to a contractor’s tripod.
5/8" x 11 thread.
• Easy to adjust leveling legs.
Item
No.
9701
UPC
No.
09701-8
Inner Pack
lbs.
Qty.
1.5
1
Outer Pack
Qty. Cu. Ft.
–
.06
Outer Pack
Qty. Cu. Ft.
.83
Item
No.
972-01
UPC
No.
97201-8
Inner Pack
lbs.
Qty.
3.2
1
Outer Pack
Qty. Cu. Ft.
.17
Solid aluminum frame, 9" overall length
Magnetic edge frees hands
Vials read plumb, level and 45-degrees
Top read window
V-grooved working edge fits on
pipe or conduit
Item
Vial
UPC
Inner Pack
No.
Code
No.
lbs.
Qty.
581-9
F
05819-4 3.2
10
5819-24
F
05819-4 7.8
24
3309-519
F
09519-9 3.2
10
Neon Orange Torpedo 36 pc. P.O.P.
587-36
F
58736-6 10.0
36
Outer Pack
Qty. Cu. Ft.
.16
.62
.16
-
Lifetime Warranty
.52
Heavy-Duty Magnetic Aluminum Torpedo
•
•
•
•
Heavy-duty aluminum frame, 9" overall length
Top read window
V-grooved working edge for pipe work
Strong holding magnetic edge
frees hands
• Vials read plumb, level and
45-degrees
Item
No.
991-9
Vial
Code
F
UPC
No.
09919-7
WWW.HANESSUPPLY.COM
Inner Pack
lbs.
Qty.
3.1
10
Outer Pack
Qty. Cu. Ft.
.16
19
Hand Tools
Top Gun Laser Level Base
Inner Pack
lbs.
Qty.
3.0
1
• Laser projects a 360-degree laser reference line accurate to
within + 1/4" across a 50' radius
• Reduces time and manpower needs when laying out
ceilings, walls, floors, cabinets, etc.
• Sets up in minutes for either plumb or level operation
• Kit includes 25 laser targets, laser assist viewing
glasses, acoustical ceiling angle bracket, leveling
platform, batteries, instructions, carrying case.
• One year manufacturer’s warranty
•
•
•
•
•
• Class II laser diode is 30% brighter than most competitor’s Class IIIa
diodes. Accurate to within +/- 1/4" at 100 feet.
• Uses include installing countertops, wainscoting, cabinets, masonry
work, chair rail, machinery alignment
• Kit includes laser beam level, instruction book, carrying case, 4 laser
targets, 2-AAA batteries.
• One year manufacture’s warranty.
UPC
No.
97001-4
UPC
No.
97101-1
Magnetic Aluminum UnitekTM Torpedo
Top Gun 24" Laser Beam Level
Item
No.
970-01
Outer Pack
Qty. Cu. Ft.
.34
Blazer Rotary Laser
• Heavy-duty frame with reinforcing center strut maximizes frame
durability. Tool won't twist or bend under normal use.
• Strong magnetic edge frees hands when working with ferrous surfaces
• Oversized hand holes for sure-handed carrying
• Shatter resistant acrylic level vial provides 300-degree viewing,
maximizes readings from any angle.
• Bright orange finish is extremely durable and makes tool easy to see
• Rubberized anti-slip end plates absorb shock
• 2 vials on 24" model;
3 vials on 48" model
• Bright Orange Color
with Hand Holes
Vial
Code
J
D
Inner Pack
lbs.
Qty.
0.75
1
• Used to project a plumbed laser dot to above ceiling locations. Use when
conventional plumb bob application is needed but with greater speed
and accuracy.
• One man operation
• Accurate to within 1/8" at 25', 1/4" at 50'
• Bright Class II laser diode
• 1 pc. Molded glass reinforced polycarbonate frame
guarantees durability
• One year manufacturer’s warranty
Item
No.
971-01
TitanTM Magnetic Box Levels
Item
No.
981-24
981-48
UPC
No.
97102-8
Top GunTM Vertical Laser
Brass Bound Mahogany Level 24", 48"
Item
Vial
No.
Code
990BB-24 M
990BB-48 M
• Features “rare earth” magnets that provide super holding strength on
ferrous materials.
• Made of blue anodized aircraft-quality aluminum
• Class II diode. Accurate to within + 1/4" at 100 feet.
• Exclusive VARI-PITCH vial allows user to apply a slope up to a 1/4" per
foot in 1/8" increments.
• Exclusive safety strap protects level from dropping when working with
oversized or non-ferrous pipes
• Powered by two long-lasting
AAA batteries (included)
• One year manufacturer’s
warranty
Lifetime Warranty
19 -23
Albany/NE Division:
518.438.0139
Rochester Division:
585.235.0160
FAX:
FAX:
FAX:
716.826.4412
518.438.5343
585.235.0229
CCISCO: 843.238.1338
FAX:
843.238.8337
Hand Tools
Empire
Magnetic Polycast® Protractor
Professional Combination Square
• Magnetic base and back
• Easy reading dial with adjustable angle pointer
• Built-in angle pitch calculator on back
• Durable POLYCAST® construction
• Transfer angles to within 1-degree
• Use for making accurate 90-degree & 45-degree, markings, measuring
and checking depth
• 12" steel blade with 1/8", 1/16", 1/32" graduations
• Self-aligning drawbolt
• Hardened scriber
• Machined head with full view
acrylic vial
Item
No.
36
UPC
No.
00036-0
Inner Pack
lbs.
Qty.
4.5
10
Outer Pack
Qty. Cu. Ft.
.31
Item
No.
230
UPC
No.
00230-2
Inner Pack
lbs.
Qty.
7.0
10
Outer Pack
Qty. Cu. Ft.
.22
BullseyeTM Level
• Levels in all directions
• Use on ranges, refrigerators, washers, dryers,
stereos, RV appliances
Item
No.
3604
UPC
No.
03604-8
Inner Pack
lbs.
Qty.
.5
10
Heavy-Duty Professional Combination
Square
Outer Pack
Qty. Cu. Ft.
.07
• Use for making accurate 90-degree & 45-degree markings, measuring
and checking depth.
• 12" stainless steel blade on both models, 1/8", 1/16", 1/32" graduations
for Model 250; metric graduations only for Model 250M.
• Machined square head
• Full view vial
• Hardened scribe
Carpenter’s Pencils
• Unique shape prevents rolling
• Medium lead can be sharpened easily
• 4 per card
Item
No.
87-7
87 BLK
UPC
No.
00877-9
-
Inner Pack
lbs.
Qty.
1.5
10
8.4
72
Item
No.
250
250M
Outer Pack
Qty. Cu. Ft.
.17
.06
•
•
•
•
Lightweight construction minimizes line sag
Unbendable open hooks allow level to slide freely
Pocket clip will guard tool against loss
Use for landscaping, plumbing, masonry work, gutters and sheet metal
work
• VARI-PITCHTM vial reads from level to 1/2" pitch in 1/8" increments
Inner Pack
lbs.
Qty.
.4
10
.4
10
2.8
40
.4
10
50
.45
1.0
10
-
.07
Inner Pack
lbs.
Qty.
.6
10
19 -24
UPC
No.
00220-3
22000-3
00220-3
Inner Pack
lbs.
Qty.
4.2
10
4.2
10
10.1
24
Outer Pack
Qty. Cu. Ft.
.22
.22
.75
Hand Tools
Inner Pack
lbs.
Qty.
8.0
10
Outer Pack
Qty. Cu. Ft.
.25
Lifetime
Warranty
24" x 2" body, 16" x 1-1/2" tongue, 1/16" thick
Permanently stamped numbers and 1/8" graduations
Durable protective epoxy finish to prevent rust
Model 1110 has inch graduations, Model 1110IM has inch/metric
graduations
Item
No.
1110
1110M
Outer Pack
Qty. Cu. Ft.
.08
and checking depth
• 12" steel blade, 1/8", 1/16", 1/32" graduations for Model 220, 12"
stainless steel blade with inch/metric graduations for Model 220 IM
• Durable POLYCAST® head
• Full view acrylic vial
Item
No.
220
220IM
220-24
UPC
No.
00280-7
•
•
•
•
PolysteelTM Combination Square
19
Lifetime
Warranty
16" x 24" Steel Tradesman Square
• Strong molded frame
• Top reading window
• Durable pocket clip
UPC
No.
00845-8
Outer Pack
Qty. Cu. Ft.
.22
.22
and checking depth
• 16" stainless steel blade spans wider boards, 1/8", 1/16" graduations
• Machined square head
• Self-aligning drawbolt,
hardened scriber
Item
No.
280
Outer Pack
Qty. Cu. Ft.
50
.45
50
.45
.33
Pocket Level
Item
No.
84-5
Inner Pack
lbs.
Qty.
7.0
10
7.0
10
Heavy-Duty Professional 16" Combination
Square
Line Levels
Item
UPC
No.
No.
83-8
00833-5
3310-833 10833-2
833-40
00833-5
Vari-Pitch Line Level
83-8
00838-0
Line Level Set
83038
83038-7
UPC
No.
00250-0
11250-6
UPC
No.
01110-6
11100-4
Inner Pack
lbs.
Qty.
10.8
6
10.8
6
Outer Pack
Qty. Cu. Ft.
24
.69
.15
16" x 24" Aluminum Professional Square
• 24" x 2" body, 16" x 1-1/2" tongue, 1/8" thick
• Permanently stamped numbers, rafter tables and graduations on
brushed aluminum finish
• Complete 1/8" graduated scale
• Aluminum construction will not rust or corrode
Item
No.
1140
UPC
No.
01140-3
WWW.HANESSUPPLY.COM
Inner Pack
lbs.
Qty.
4.8
5
Outer Pack
Qty. Cu. Ft.
20
.56
Albany/NE Division:
518.438.0139
Rochester Division:
585.235.0160
FAX:
FAX:
FAX:
716.826.4412
518.438.5343 CCISCO: 843.238.1338
585.235.0229
FAX: 843.238.8337
Hand Tools
Empire
100' ABS Case Steel Tape
16" x 24" Anodized Aluminum
Professional Square
• 24" x 2" body, 16" x 1-1/2" tongue, 1/8" thick
• Easy-reading black anodized finish with permanently stamped white
numbers
• Complete rafter tables and graduations
• Complete 1/8" graduated scale
• Aluminum construction will not rust
Item
No.
1190
UPC
No.
01190-8
Inner Pack
lbs.
Qty.
4.5
5
Outer Pack
Qty. Cu. Ft.
.14
Lifetime Warranty
•
•
•
•
Fits comfortably in hand
High impact resistant ABS case
Folding rewind crank for fast reliable retrieval
Carbon steel blade has acrylic coating to
resist chemicals, corrosion and breakage
• Zero at end of hook
• Stainless steel belt clip
Item Blade
UPC
No.
LxW
No.
6699 100'x3/8" 06699-1
Inner Pack
lbs
Qty.
5.7
10
Outer Pack
Qty. Cu. Ft.
40
1.50
Open Reel Fiberglass Tape with
Inch and Engineer’s Scale
16" x 24" “Fat Boy” Aluminum Framing
Square
• 24" x 2" body, 16" x 1-1/2" tongue
• Heavy-gauge aluminum 3/16" thick resists bending
• Deep stamped inch graduations, numbers and rafter tables
for long life
• Aluminum construction will not rust or corrode
Item
No.
1240
UPC
No.
01240-0
Inner Pack
lbs.
Qty.
4.0
3
Outer Pack
Qty. Cu. Ft.
.14
Heavy-Duty Extruded Aluminum Rafter
Layout Square
• Solid, one-piece extrusion outperforms brittle die casts.
• Easy reading anodized black and white square comes with instruction
manual with tables.
• Aluminum frame will not rust
• Use as a saw guide
• Use for marking and cutting 90-degree and
45-degree angles
• Lifetime warranty
Item
No.
290
UPC
No.
00290-6
Inner Pack
lbs.
Qty.
9.0
12
Outer Pack
Qty. Cu. Ft.
.21
Rafter Layout Square
• Heavy-duty construction with easy reading
recessed graduations and numbers
• Use as a saw guide
• Use for marking and cutting
90-degree and 45-degree angles
• Lifetime warranty
Item
No.
294
UPC
No.
02940-8
Inner Pack
lbs.
Qty.
13.0
20
Outer Pack
Qty. Cu. Ft.
1.3
Power Tapes
Durable chrome and neon cases
Blade lengths from 10' to 30'
Bold, clear numbers on bright yellow blades
Rigid blade with protective acrylic coating
3-inch case lengths on 25' and 30' tapes
Durable steel belt clip
3 language packaging on neon orange case
tapes
• Dependable slide locks
• Inch/metric blade graduations available on
neon orange case 25' and 30' lengths
Item Blade
UPC
Inner Pack
No.
LxW
No.
lbs
Qty.
Chrome Case with Slide Lock Mechanism
610 10' x 5/8" 00610-2
3.9
12
612 12' x 5/8" 00612-6
4.2
12
616 16' x 3/4" 00616-4
5.5
12
626 25' x 1" 00626-3
9.8
12
636 30' x 1" 00636-2
12.1
12
Outer Pack
Qty. Cu. Ft.
48
48
48
48
48
0.75
0.75
0.91
1.82
1.82
Item Blade
UPC
No.
LxW
No.
6799 100'x1/2" 06799-8
6820 200'x1/2" 06820-9
6830 300'x1/2" 06830-8
Inner Pack
lbs
Qty.
8.7
5
2.6
1
3.8
1
Outer Pack
Qty. Cu. Ft.
.70
5
1.00
5
1.30
Open Reel Fiberglass Tape with Inch and
Metric Scale
• High Impact-resistant ABS body
• Fiberglass tape will not rot, corrode or distort
• Numbers and graduations are printed in black
on white blade
• Zero at end of hook
• Comfortable rubber hand grip
• 100' tape sold as 5 Pc. P.O.P.
Item
Blade
UPC
No.
LxW
No.
6711 100'x1/2" 06711-0
6812 200'x1/2" 06812-4
6813 300'x1/2" 06813-1
Inner Pack
lbs
Qty.
8.7
5
2.6
1
3.8
1
Outer Pack
Qty. Cu. Ft.
.70
5
1.00
5
1.30
Steel Plumb Bobs
• Steel plumb bob with plated finish to resist corrosion
• Ties easily to any string or line
• Used in wallpapering, installing support beams, etc.
Item
UPC
No.
No.
905 00905-9
908 00908-0
Inner Pack
lbs
Qty.
3.8
10
5.5
10
Outer Pack
Qty. Cu. Ft.
.17
.17
Heavy-Duty Aluminum Straight Edges
• Easy reading inch scale graduations
• Heavy-duty aluminum straight edge-2" width
Item
Blade
No.
LxW
4003
36"
4003IM*
36"
4004
48"
4004IM*
48"
4006
72"
4008
96"
4010**
1M
403
36"x1-1/8"
WWW.HANESSUPPLY.COM
UPC
No.
04003-8
40030-6
04004-5
40040-5
04006-9
04008-3
04010-6
00403-0
Inner Pack Outer Pack
lbs Qty. Qty. Cu. Ft.
7.5
8
.14
7.5
8
.14
10.8 8
.18
10.8 8
.18
10.1 5
.27
13.5 5
.35
8.6
8
.15
2.6 10
.03
19
Hand Tools
•
•
•
•
•
•
•
• Heavy-Duty construction
• High impact resistant ABS body
• Exclusive 2 color blade
- white for inch scale,
- yellow for engineer’s scale
• Numbers and graduations printed in black
• Fiberglass tape will not rot, corrode or distort
• Comfortable rubber hand grip
• 100' tape sold as 5 Pc. P.O.P.
*Inch/metric graduations
**Metric graduations
19 -25
Albany/NE Division:
518.438.0139
Rochester Division:
585.235.0160
FAX:
FAX:
FAX:
716.826.4412
518.438.5343
585.235.0229
CCISCO: 843.238.1338
FAX:
843.238.8337
Hand Tools
Estwing / Fiskars®
Hatchets
Estwing
Hammers
A
B
C
D
E
Tool
Type
Order
No.
Weight
(oz)
Description
B
E3-12S
E3-20S
16
20
Full Polished, Straight Claw, Nylon-Vinyl Grip
Full Polished, Straight Claw, Nylon-Vinyl Grip
C
E3-22SM
22
E3-22S
22
E3-24SM
24
E3-24S
24
E3-28SM
28
E3-28S
28
ES-30SM
30
E3-30S
30
Milled Face, Long Handle, Full Polished, Straight Claw,
Framing Hammer, Nylon-Vinyl Grip
Long Handle, Full Polished, Straight Claw,
D
E16C
E20C
16
20
Full Polished, Curved Claw, Leather Grip
Full Polished, Curved Claw, Leather Grip
E
E16S
E20S
16
20
Full Polished, Straight Claw, Leather Grip
Full Polished, Straight Claw, Leather Grip
Fiberglass Handle Hammers
A
Tool
Type
A
B
C
D
Order
No.
FG-16C
FG-16S
FG-20C
FG-20S
Weight
(oz)
16
16
20
20
B
C
D
Description
Fiberglass Handle Hammer, Curved Claw, Smooth Face
Fiberglass Handle Hammer, Straight Claw, Smooth Face
Fiberglass Handle Hammer, Curved Claw, Smooth Face
Fiberglass Handle Hammer, Straight Claw, Smooth Face
Tool
Type
A
D
D
Order
No.
E3-1H
E3-2H
E3-CA
Cutting
Edge (in)
3-1/8
3-5/8
See B-5
blades
F
E3-S
1-7/8
F
Description
Carpenter's Hatchet-Full Polished, Nylon-Vinyl Grip
Carpenter's Hatchet-Full Polished, Nylon-Vinyl Grip
Shingler's Hammer-For use with both Metric & Standard
Composition Shingles, Full Polished, Nylon-Vinyl Grip,
Milled Head, w/Replaceable Retractable Blade and Gauge
Shingling Hatchet-For use with both Metric & Standard
Shingles and Wook Shakes, Full Polished,
Nylon-Vinyl Grip, Milled Head, w/ Gauge
Supreme Rock Pick
Order
No.
E3-12PC
E3-20PC
E3-24PC
Weight
(oz)
Description
12
Supreme Rock Pick-Chisel Edge,
Full Polished, Nylon-Vinyl Grip
20
24
Soft Face Hammers
Face
Head
Overall
Order Dia.
Lgth.
Lgth.
No.
(in)
(in)
(in)
Dead Blow Hammers (A)
14E
1-1/4
3-1/8
10-1/8
22E
1-5/8
3-3/4
11-1/4
27E
2
4-1/8
12-3/4
45E
2-1/4
4-5/8
14-3/8
54E
2-5/8
5-3/8
15-1/4
Slim Line Dead Blow Hammers (B)
9S
7/8
2-7/8
9-3/8
18S
1-1/4 4-3/16 10-5/8
23S
1-1/2
4-1/4
12-1/8
27S
1-5/8
5-1/4
12-3/4
Slim Line Dead Blow Hammers (C)
88E
2-3/4
7
20
144E 2-3/4
7
30
176E 3-1/2
8
30
192E 3-1/2
8
36
DeadheadTM Rubber Mallets (D)
DH-12 2-1/4
4
13
DH-18 2-3/8
4-1/2
14-1/2
Wt.
A
14 oz.
22 oz.
27 oz.
45 oz.
54 oz.
9 oz.
18 oz.
23 oz.
27 oz.
5lb, 8 oz
9 lb.
11 lb.
12 lb.
B
C
D
20 oz.
25 oz.
Specialty Hammers
Fiskars®
ERGO CUTTERS
A
Hand Tools
19
Tool
Type
A
B
Order
No.
E3-12BL
E3-20BL
E3-24BL
E3-11
E3-17
C*
B3-2LB
B3-3LB
B3-4LB
B3-4LBL
D
E3-WC
B3-WC
19 -26
B
Weight
12 oz.
20 oz.
24 oz.
14 oz.
C
D
Description
Tile Setter's Hammer-Full Polished, Nylon-Vinyl Grip
Mason's Hammer-Full Polished, Nylon-Vinyl Grip
Mason's Hammer-Full Polished, Nylon-Vinyl Grip
Drywall Hammer-Crowned & Scored Face, Full Polished,
Nylon-Vinyl Grip
17 oz.
Drywall Hammer-Long Handle, Crowned & Scored Face,
2 lbs.
Drilling Hammer-Painted Finish, Nylon-Vinyl Grip
3 lbs.
4 lbs.
4 lbs. Drilling Hammer-Long Handle, Painted Finish, Nylon-Vinyl Grip
*The proper tool for driving hardened nails and cold chisels.
20 oz.
Welding/Chipping Hammer-Full Polished, Nylon-Vinyl Grip
20 oz.
Welding/Chipping Hammer-Painted Finish, Nylon-Vinyl Grip
All-Purpose Snip
9613 - A workhorse. Long serrated blades reduce slippage, and
the spring action minimizes hand
fatigue. Performs well on both
light and heavy materials.
Fiber-Optic Snips
9924 - Perfect for trimming the
Kevlar® strands from Fiber-Optic
cable or any intricate cutting of
aramid fibers. High Performance
steel blades last up to 15x
longer than standard steel blades. Award-winning Softouch® ergonomic
design handles. Features a metric scale on the blade for trimming strands
to length.
WWW.HANESSUPPLY.COM
Albany/NE Division:
518.438.0139
Rochester Division:
585.235.0160
FAX:
FAX:
FAX:
716.826.4412
518.438.5343 CCISCO: 843.238.1338
585.235.0229
FAX: 843.238.8337
Hand Tools
Fiskars
®
Multi-Plier® 400 Series
UTILITY KNIVES
®
PowerGrip Utility Knife
7845 - Ergonomically designed to
encourage a neutral hand position, for
greater comfort and ease of use. Cuts
cloth, leather, vinyl, cardboard, plastic,
and much more.
Replacement Blades for 7845 Utility Knife - 5 pk.
93056919 - Five pack replacement blades for the PowerGrip® Utility Knife.
Replacement Blades for 7845 Utility Knife - 10 pk.
93106919 - Ten pack replacement blades for the PowerGrip® Utility Knife.
Heavy Duty Ergo Utility Knife
7849 - Professional ergonomic design
to promote a neutral hand position with
a non-slip rubber grip for safety. Quick
blade changes no tools required. Four
position retractable blade controls cutting depth. Extra blades can be stored
in the handle.
Model
No.
05500
05510
Softouch® Razor Knife
Multi-Plier 600 Series
*Delux: Multi-Plier® 600 Series with all of the
extras including Fiskars® scissors, the
replaceable saw blade and the handy tool kit.
Model
No.
07500
07530
07564
Length
Open (in)
6.375
6.625
6.625
Length
Closed (in)
4.875
5.125
5.125
Wt.
(oz)
8
8
11.5
Length
Closed (in)
1.2
1.2
05510
Wt.
(oz)
6
9.5
E-Z OutTM Knives
MULTI-PURPOSE TOOLS
07500 - MP600 Blunt w/Sheath
07530 - MP600 Needlenose w/Sheath
07564 - MP 600 NN Delux*
w/Tool Kit, Sheath
Length
Open (in)
5.75
5.75
05500
FOLDING KNIVES
2607 - Ideal for cutting a wide
variety of lightweight materials.
Cushion grip provides maximum
comfort and control. Blade is easily replaced.
The Multi-Plier® 600 Series includes:
• Blunt or needlenose pliers
• Wire cutter
• Crimper
• Stand/Metric Scale
• Lanyard ring
• File
• Crosshead Screwdriver
• Bottle/Can Opener
• Serrated Sheepsfoot blade
• Large, Medium & Small Flathead
Screwdrivers
• Drop Point Blade
Multi-Plier® 400 series Compact Sport.
It is a lighter, more compact version of
the Multi-Plier® 600 series. Some users
like multi-function tools, but want
something compact to carry at all
times. The Multi-Plier® 400 series was
designed specifically for those users.
The Compact Sport is one handed
opening, has all locking components,
independent tool rotation, and comfortable non-pinch handles like the MultiPlier® 600 series in a tool 3/4 of the
size.
05500 - MP400 Compact Sport
w/Sheath
05510 - MP400 Compact Sport w/Tool
Kit, Sheath
07500
Features all the best that users expect
from today's pocket knife. E-Z Out®
Knives are one-handed opening, pocket
clip knives with molded Kraton® inserts
on the handles providing a firm and
comfortable grip during use. The low profile oval hole in the blade allows for one
handed opening, yet keeps the stainless
steel blade unobtrusive for everyday use.
06701 - E-Z-OutTM
06751 - E-Z-OutTM Serrated
06501 - E-Z-OutTM Jr.
06551 - E-Z-OutTM Jr. Serrated
06701
06751
06501
07530
Model
No.
06701
06751
06501
06551
Length
Open (in)
8
8
5.5
5.5
Blade
Closed (in)
3.5
3.5
2.375
2.375
Wt.
(oz)
3
3
1.7
1.7
06551
07564
SOFT-SIDED ORGANIZERS
Bucket Boss® 24 - 01024
• Large power tools and cords fit easily
inside of bucket
• Small pockets great for drill bits, nail set
and pencils
• 24 Pockets carry and organize a wide
variety of tools
• Made with 600 denier fabric
19
Hand Tools
Bucket Boss® 44 - 01044
• Boss®Tex ripstop fabric
• Interior loop keeps hammer in place and
accessible
• 30 outside pockets, 14 inside pockets
• Special shallow pocket for small items like
screwdriver bits
• Handy loop can dispense tape without
removing roll
WWW.HANESSUPPLY.COM
19 -27
Albany/NE Division:
518.438.0139
Rochester Division:
585.235.0160
FAX:
FAX:
FAX:
716.826.4412
518.438.5343
585.235.0229
CCISCO: 843.238.1338
FAX:
843.238.8337
Hand Tools
Fiskars®
Super Chutes®
Parts Bag - 25005
Stacker PocketsTM - 03061
• Straps to the outside lip of any 5 gallon bucket
• 27 pockets to hold all of your tools
• 600 denier polyester in yellow and black
•
•
•
•
GatemouthTM Jr. - 06007
Duckwear®
Tool Roll - 07004
• Dimensions: 13" L x 9" W x 8" H
• Ideal for cordless power tools or smaller
corded power tools
• Super-wide opening GatemouthTM design.
• Padded sides protect tools, rigid bottom
retains shape
• 22 pockets to carry a variety of tools
• Socket strip holds 3/8" and 1/4" sockets
• Two barrel locks to secure
• Duckwear® color scheme
• Imported
Pro Super
GateMouthTM - 06067
Bucket Stacker® - 15051
• Four compartments for organizing nails, nuts,
and much more
• Includes a drill bit sizer, pencil holder and 4"
measuring rule
Better than a tool box!
• Dimensions: 19"L x 14"W x 12"H
• 39 exterior pockets and 10 interior
pockets organize your tools
• Rugged ripstop fabric with ballistic
reinforcement on sides and bottom
• Outside elastic straps for quick access to
a level or long handled tool
• Rigid bottom padded to protect tools
• Beefy shoulder strap for heavy loads
• Handy tape loop dispenses tape or keeps keys handy
Contractor’s
Briefcase® - 06005
- 06066
Bigger, Better, Stronger - 500 cubic
inches larger than the original.
• Dimensions: 18"L x 10"W x 12"H
• Rugged ripstop fabric with ballistic
reinforcement on the sides and
bottom
• Exterior loop dispenses tape or
keeps keys handy
• Outside elastic straps for quick access
to a level or favorite long handled tool
• Rigid bottom padded to protect tools
• Beefy shoulder strap for heavy loads
Pro GateMouthTM
Mobile office and toolcase in one.
• Adjustable shoulder strap
• Side release buckle
• 600 Denier Polyester
• Imported
Pro GateMouthTM Jr. - 06065
Contractor’s
PortfolioTM - 57021
Same great design as the Pro GateMouthTM
in a smaller size.
• Dimensions: 12.5"L x 10"W x 9.5"H
• 100 cubic inches larger than original, wider
opening for easy access
• Adjustable shoulder strap
• Rugged ripstop fabric with ballistic reinforcement on sides and bottom
• Fits today's bigger drills
Hand Tools
19
For small parts and tools
12 exterior tool pockets
6 interior compartments
Made of 600 Denier Polyester in yellow
and black with a drawstring closure
Carries the essentials for jobsite visits.
• Right/left-handed legal pad holder
• Zips for extra security
• Interior pockets
• 600 Denier Polyester
Tool HogTM
- 06080
Instantly create a workstation at the jobsite.
• Dimensions: 17.5"L x 12"W x 12"H
• Three removable tool boards connect to
make a work station
• For smaller jobs, turn the detachable
shoulder bag into a convenient tool
pouch
• Internal file storage pocket
• Large main compartment opens wide for easy access
• Padded wrap handle and shoulder straps
• Constructed of two layers of rugged fabric sandwiching dense foam
19 -28
Contractor’s Organizer® - 57011
Time and project management system.
• Designed for contractors and small business
owners
• 3-ring binder, Bucket Boss yearly planner
• Planning sheets for contractors
• Interior pockets, zipper for extra security
WWW.HANESSUPPLY.COM
Albany/NE Division:
518.438.0139
Rochester Division:
585.235.0160
FAX:
FAX:
FAX:
716.826.4412
518.438.5343 CCISCO: 843.238.1338
585.235.0229
FAX: 843.238.8337
Hand Tools
Fiskars
®
Contractor’s
RigTM - 55034
• 30 pockets for all
tool-carrying needs
• Made of durable
Anso®-tex nylon
• Comfortable, padded
adjustable belt with
reinforced spine prevents
crushing under load
Builder’s
RigTM - 55033
• 18 pockets plus tape measure pouch fits most tools
• Made of durable Anso®-tex
nylon
• Comfortable, padded
adjustable belt with reinforced spine prevents
crushing under load
16 Pocket Super Bib
Apron - 83200
• Fully adjustable with quick release
buckle
• Constructed of 12 oz. Durable cotton
duck fabric
• 16 total pockets, a variety of sizes
8 Pocket Duckwear® Bib
Apron - 82208
•
•
•
•
10 oz. 100% Cotton Duck
Bar-tacked seams
8 pockets to hold a variety of tools
Duckwear® color scheme
Cell Phone Holster - 54000
Designed to carry and protect today's
compact cell phones.
• Dense foam padding helps protect your
cell phone
• Secure quick access flap enclosure
• Stainless steel spring clip holds securely
to your belt or tool pouch
OUTDOOR TOOLS
PowerGear® By-Pass Lopper
- 9154
• 2" cutting capacity
• PowerGear® cutting action
• Tubular aluminum handles
• Teflon® coated blade
• High carbon steel blade
• Replaceable blade
• Overall length: 32"
• Made in Finland
Pruning Stik
- 9234
• Reaches branches up to 12' high without a ladder
• Trims at ground level while standing
• 1-1/4" cutting capacity
• Easy to use PowerstrokeTM cutting action
• Cutting head rotates for best pruning angle
• Dual-activated cutting, pull handle or ball end
Ropeless Tree Pruner
- 9236
• No more tangled ropes! Patented no rope design
• PowerstrokeTM cutting action
• Pole extends to 12 ft.
• 15" Saw Blade
• Teardrop-shaped fiberglass pole for added strength
• Two-position saw blade angle
• 1-1/8" lopper capacity
Power-Lever® Tree Pruner - 9261 & 9301
5 Gallon Bucket - 10001
Bucket Seat® - 10010
• Works as a cover or seat
• Works alone or with bucket tool carriers
• Air cushioned
• Made in U.S.A.
6" Deluxe Folding Saw
- 46034
Cuts wood in half the time of conventional saws.
• 6" stainless steel blade
• Cushion grip
• Quick-release® push button lock
• Triple angle tooth design
• Replacement blades available
• Patent pending
• Made in U.S.A.
WWW.HANESSUPPLY.COM
19
Hand Tools
Padded Bucket SeatTM
- 10050
Swiveling foam-padded bucket seat.
• Fits any standard 3.5 to 7 gallon bucket
• Works well with any of our Bucket Boss®
tool carriers
• 1" closed-cell EVA foam with a durable
nylon laminated cover
• 1-1/8" lopper cutting capacity
• Steel head
• 12' extension - model No. 9261
14' extension - model No. 9301
• Fiberglass pole
• Non-stick coated blade
• 15" saw blade
• Replaceable pruning blade
• Adjustable saw blade angle
• Two-point saw lock
• Patented sliding hand grip
• Made in U.S.A.
19 -29
Albany/NE Division:
518.438.0139
Rochester Division:
585.235.0160
FAX:
FAX:
FAX:
716.826.4412
518.438.5343
585.235.0229
CCISCO: 843.238.1338
FAX:
843.238.8337
Hand Tools
Fiskars® /Garland/General®
21" Bow Saw - 7029
Split-Head Hammers
• Hardened steel blade
• Made in Denmark
The split-head hammer does the work of five different hammers because
the face can be easily changed. Five face types are available: rawhide,
copper, urethane, nylon and Gar-Dur plastic.
Code
Face
No. Dia. (in)
31101 1-1/4
31002 1-1/2
31003 1-3/4
31004
2
31005 2-3/4
Power Axe 1000 - 7851
• 17-1/2" long, 1-1/2 pound axe
• Overmolded head design eliminates
risk of head loosening
• Strong fiberglass handle never
needs replacing
• Includes a plastic sheath for safe storage and carrying
• Made in Finland
Wt.
(lbs)
1-1/2
2
2-3/4
4
6-1/2
Rawhide
Face
Copper
Face
Urethane
Face
Nylon
Face
Gar-Dur
Plastic Face
Garland
MALLETS / HAMMERS
General®
Rawhide Mallets
Code
No.
11000
11001
11002
11003
11004
11005
11006
Face
Dia. (in)
1
1-1/4
1-1/2
1-3/4
2
2-3/4
2-3/4
Wt.
(oz)
2
4
6
9
11
22
24
Heavy Duty Steel Automatic Center Punch
Garland's all-rawhide mallets are made of tough,
long wearing, water buffalo rawhide.They're ideal
for use on broad-faced striking surfaces in a
broad range of applications.
UPC Code
31066 8
31068 2
31070 5
Dead-Blow Hammers
Standard Head
Soft-faced, Dead-Blow Hammers are made of high-quality, hot-cast
polyurethane that gives them outstanding elasticity. The custom-formulated
material also gives the hammers a self-healing feature that makes them
resistant to dents, abrasions and cuts for
Code
Face
Head
Wt.
longer use.
No. Dia. (in) Lgth. (in) (oz)
40001 1-1/4
3-1/8
13
40002 1-3/4
3-3/4
21
40003
2
4-1/8
26
40004 2-1/4
4-5/8
45
40005 2-3/4
5-3/8
53
Code
Face
Head
Wt.
39001
7/8
2-7/8
8
39002 1-1/4
4-3/16
18
39003 1-1/2
4-1/4
22
39004 1-3/4
5-3/16
26
Hand Tools
This handy holder allows you to hand hold punches and chisels in normally inaccessible work areas. Heavy duty 4" plastic handle with nylon tip in
steel frame reduces risk of hand injury and improperly struck tools.
• Capacity 0-1" chisels and punches.
• Rust resistant finish.
• Overall length 6".
1286
• Tungsten carbide tip marks hard materials including hardened steel,
ceramics, and glass.
• Alnico permanent magnet picks up small parts and retrieves steel chips
from hard to reach places.
• Scriber point reverses for safety.
• Replacement Point No. 88P.
• Overall length 6".
88CM
No.
88CM
88P
Scraper/Scriber
Garland rubber mallets are designed for general-purpose
applications. All sizes deliver solid, mar-free blows.
Wt.
(oz)
17
19
32
• For punching, marking, cutting and carving plastic, leather, paper, and
rubber.
• Combines a needle sharp hardened scriber with a specially designed
hardened raked angle sharp chisel scraper in the same tool.
• Knurled 1/4" body with an overall length of 6-1/2".
UPC Code
31406
Plastic Mallets
Our plastic mallets are made from Garland's own Gar-DurTM ultra-high-molecularweight plastic. This nonporous material won't mar and is easy to clean.
19 -30
78
Punch/Chisel Holder
UPC Code
31116
31114
Rubber Mallets
Code
Face
Head
Wt.
15001 1-1/4
3
4
15002 1-1/2
3-1/2
6
15003 1-3/4
3-7/8
9
15004 2-1/8
4-1/2
14
15005 2-1/2
4-7/8
19
15006 2-3/4
5
24
Replacement point
Replacement shaft
Tungsten Carbide Scriber & Magnet
Slim-Line
Soft-faced, Dead-Blow Hammers are made of high-quality, hot-cast
polyurethane that gives them outstanding elasticity. The custom-formulated
material also gives the hammers a self-healing feature that makes them
resistant to dents, abrasions and cuts for longer use.
19
No.
78
78P
78SH
UPC Code No.
30995 2
1286
Dead-Blow Hammers
Code
Face
Head
No. Dia. (in) Lgth. (in)
13001
2-1/4
3
13002
2-1/4
3-7/8
13003
2-1/2
4-1/2
• Heavy duty center punch.
• Black oxide finish inhibits rust.
• All steel 6" body with threaded, replaceable hardened steel point
and shaft.
• Body diameter is 5/8".
No.
381
381
Pocket Scriber
• Replaceable hardened and centerless ground point.
• Point reverses into knurled body for safety.
• Body diameter 1/4".
• Conforms to government specifications GGG-S-131e.
UPC
Code
31098
31100
Body
Blade
Overall
No. Dia. (in) Lgth. (in) Lgth.(in)
83
1/4"
2-3/8"
4-3/4"
83P
WWW.HANESSUPPLY.COM
83
Albany/NE Division:
518.438.0139
Rochester Division:
585.235.0160
FAX:
FAX:
FAX:
716.826.4412
518.438.5343 CCISCO: 843.238.1338
585.235.0229
FAX: 843.238.8337
Hand Tools
General
®
Flag Leg Pattern Dividers and Calipers
• Flat leg dividers and caliper legs are forged of special caliper steel.
• Hardened and tempered bow springs and fulcrum spools assure uniform
tension without side play.*
• Adjusting screw has a self seating washer and nut to permit quick and
positive adjustment.*
• Dividers have hardened points.
• Calipers have hardened measurement faces.
• Meet government specifications GGG-C-95.
UPC
Size
Code
No.
(in)
Dividers
31598 4
450-4
4"
31601 1
450-6
6"
31604 2
450-8
8"
31592 2
450-10 10"
31595 3
450-12 12"
Outside Calipers
31615 8
452-4
4"
31618 9
452-6
6"
31621 9
452-8
8"
31607 3
452-10 10"
31610 3
452-12 12"
Inside Calipers
31636 3
454-4
4"
31639 4
454-6
6"
31641 7
454-8
8"
31624 0
454-10 10"
31627 1
454-12 12"
Hermaphrodite Calipers
31644 8
456-6
6"
450
452
454
456-6
*Caliper/Divider 450, 452 and 454 only.
No.
176
Here is a real time saver for the removal of frozen, hard to remove rusted
nuts.
• Only 4-3/4" long, this compact tool will split nuts up to 1/2" automotive
series (3/4" or 19mm across flats).
• Standard 3/4" driving hex head for use with wrenches or sockets.
• Angled body for getting into hard to reach work areas.
• Replaceable hardened steel chisel point can be reversed to achieve best
cutting angle.
• Made of high grade heat treated
forged steel for durability. Plated and
black oxide finishes to prevent rust.
No.
175
Thread Repair Files
5
2
0
6
Thread
Pitchers
11, 12, 13, 14, 16, 18, 20, 24, T.P.I.
9, 10, 12, 16, 20, 27, 28, 32, T.P.I.
8, 11-1/2", 14, 18 iron pipe
.75, 1.0, 1.25, 1.5, 1.75, 2.0, 2.5, 3.0mm
177-1
177-2
177-3
177-4
CF647
CF661
CF1865
UPC
Code
6" RULES
39021 9
33015 4
33018 5
33020 8
33025 3
33030 7
33035 2
33040 6
Stock
No.
Size
(in)
Grad.
Type
CF640mm
CF643
CF644
CF645
CF646
CF647me
CF649md
CF661
150mm Flex
6" Flex
6" Flex
6" Flex
6" Flex
6" Flex
6" Flex
6" Rigid
3R
4R
5R
16R
4R
33045 1
CF663
6" Rigid
33050 5
CF664
6" Rigid
33055 0
CF665
6" Rigid
33060 4
CF666
6" Rigid
33065 9
CF667me
6" Rigid
33070 3
CF669md
6" Rigid
6" BLACK NICKEL PLATED RULES
33019 2
BF644
6" Flex
33021 5
BF645
6" Flex
33051 2
BF664
6" Rigid
33056 7
BF665
6" Rigid
12" RULES
33075 8
CF1243
12" Flex
33080 2
CF1244
12" Flex
33085 7
CF1245
12" Flex
33090 1
CF1246
12" Flex
33095 6
CF1247me
12" Flex
33100 7
CF1249md
12" Flex
33105 2
CF1263
12" Rigid
33110 6
CF1264
12" Rigid
33115 1
CF1265
12" Rigid
33120 5
CF1266
12" Rigid
18" RULES
33130 4
CF1843
18" Flex
33135 9
CF1844
18" Flex
33140 3
CF1845
18" Flex
33145 8
CF1846
18" Flex
33150 2
CF1847me
18" Flex
33155 7
CF1849md
18" Flex
33160 1
CF1863
18" Rigid
33165 6
CF1864
18" Rigid
33170 0
CF1865
18" Rigid
33175 5
CF1866
18" Rigid
24" RULES
33180 9
CF2443
24" Flex
33185 4
CF2444
24" Flex
33190 8
CF2445
24" Flex
33195 3
CF2446
24" Flex
33200 4
CF2447me
24" Flex
33205 9
CF2449md
24" Flex
33210 3
CF2463
24" Rigid
33215 8
CF2464
24" Rigid
33220 2
CF2465
24" Rigid
33225 7
CF2466
24" Rigid
33230 1
CF2467me
24" Rigid
33235 6
CF2469md
24" Rigid
ADJUSTABLE HOOK RULES
33010 9
CF624H
6" Rigid
33005 5
CF1224H
12" Rigid
Graduation
Side 1
Graduation
Side 2
Width†
(in)
mm, .5mm
10, 50
32, 64
32, 64
50, 100
mm, .5mm
mm, .5mm
32, 64
1/2
1/2
1/2
1/2
1/2
1/2
1/2
3/4
3R
4R
5R
16R
-
mm, .5mm
32, 64
8, 16
10, 100
32, 64
32, 64
10, 100
8, 16
w/32nd End Grads
32, 64
8, 16
10, 100
32, 64
32, 64
10, 100
10, 50
32, 64
32, 64
50, 100
mm, .5mm
mm, .5mm
3/4
3/4
3/4
3/4
3/4
3/4
4R
5R
4R
5R
8, 16
10, 100
8, 16
10, 100
32, 64
32, 64
32, 64
32, 64
1/2
1/2
3/4
3/4
3R
4R
5R
16R
3R
4R
5R
16R
32, 64
8, 16
10, 100
32, 64
32, 64
10, 100
32, 64
8, 16
10, 100
32, 64
10, 50
32, 64
32, 64
50, 100
mm, .5mm
mm, .5mm
10, 50
32, 64
32, 64
50, 100
1/2
1/2
1/2
1/2
1/2
1/2
1
1
1
1
3R
4R
5R
16R
3R
4R
5R
16R
32, 64
8, 16
10, 100
32, 64
32, 64
10, 100
32, 64
8, 16
10, 100
32, 64
10, 50
32, 64
32, 64
50, 100
mm, .5mm
mm, .5mm
10, 50
32, 64
32, 64
50, 100
3/4
3/4
3/4
3/4
3/4
3/4
1-1/8
1-1/8
1-1/8
1-1/8
3R
4R
5R
16R
3R
4R
5R
16R
-
32, 64
8, 16
10, 100
32, 64
32, 64
10, 100
32, 64
8, 16
10, 100
32, 64
32, 64
10, 100
10,50
32, 64
32, 64
50, 100
mm, .5mm
mm, .5mm
10, 50
32, 64
32, 64
50, 100
mm, .5mm
mm, .5mm
3/4
3/4
3/4
3/4
3/4
3/4
1-1/8
1-1/8
1-1/8
1-1/8
1-1/8
1-1/8
4R
4R
8, 16
8, 16
32, 64
32, 64
3/4
1
†Dimensions are approximate.
WWW.HANESSUPPLY.COM
19 -31
19
Hand Tools
These indispensable files restore damaged external threads on studs, bolts
screws, plumbing pipe and pipe fittings.
• Four different high carbon steel files are
available. Each file provides 4 to 8
different thread pitches.
• Restores rusted or corroded fasteners.
• Doubles as a screw pitch gage.
• Length 8-1/2" x 7/16" x 7/16".
File
No.
177-1
177-2
177-4
177-8
CF645
CF665
Nut Splitter
UPC
Code
31236
31240
31244
31242
Type of Graduations:
3R Graduation - 32nds, 64ths, 10ths, 50ths.
4R Graduation - 8ths, 16ths, 32nds, 64ths.
Metric English - 32nds, 64ths, 0.5mm, mm.
CF624H
• Eliminates the inconvenience and cost of replacing damaged fasteners.
• Constructed of durable high carbon tool steel with a serrated cutting edge.
• 60 degree angle allows use on all pitches and diameters of threads.
• Rust resistant black oxide finish.
• Comfort grip vinyl handle.
• Overall length 9" with 5" working blade.
UPC Code
31325 6
• All Ultratest rules are manufactured by a special process to meet or
exceed federal specification GGG-R-791f for accuracy.
• They have ultra fine black graduations against hard satin chrome finish
for easy reading and long life.
• All Ultratest rules supplied with plastic case.
CF1265
Universal Thread File
UPC Code
31234 1
Ultratest® Steel Rules
Albany/NE Division:
518.438.0139
Rochester Division:
585.235.0160
FAX:
FAX:
FAX:
716.826.4412
518.438.5343
585.235.0229
CCISCO: 843.238.1338
FAX:
843.238.8337
Hand Tools
General®
Steel Rules
Telescoping Gages
General industrial quality rules are precision
made with etched fine black graduations on
stainless steel or satin chrome finish.
CF616
1201me
1210
1216
1276
308
301 300
1251
UPC
Stock
Size
Grad.
Code
No.
(in)
Type
6" PRECISION STAINLESS STEEL RULES
32096 4
616
6" Flex
5R
32105 3
633
6" Flex
–
32108 4
634
6" Flex
4R
32110 7
651
6" Flex
Model RR
32111 4
676
6" Rigid
4R
32114 5
678med
6" Rigid
–
32162 6
1201me
12" Flex
–
32168 8
32171 8
32174 9
32177 0
32180 0
1203me
1210
1216
1234
1251
12" Flex
–
12" Flex Center Finding
12" Flex
5R
12" Flex
4R
12" Flex
Model RR
Graduation
Side 1
Graduation
Side 2
10, 100
10, 50
8, 16
HO, S, O, Gage
8, 16
mm, .5mm
32, 64
15/32
16, 32
15/32
32, 64
15/32
N, Z
3/4
32, 64
3/4
10, 20, 50, 100 3/4
16, 32, 64
16, 32, 64
mm, .5mm
mm, .5mm
16, 32
10, 100
8, 16
HO, S, O, Gage
8, 16
32, 64
32, 64
32, 64
32, 64
32, 64
N Gg., mm, 64
Dec. Equiv.
32, 64
31286 0
1276
12" Rigid
4R
8, 16
6" AND 12" PRECISION SATIN CHROME STAINLESS STEEL RULES
32123 7
CF616
6" Flex
5R
10, 100
32129 9 CF618med
6" Flex
.5mm, 100
32132 9
CF633
6" Flex
10, 50
32135 0
CF634
6" Flex
4R
8, 16
32141 1
CF676
6" Rigid
4R
8, 16
32147 3 CF678med
6" Rigid
mm, .5mm
32, 64
32, 64
16, 32
32, 64
32, 64
10, 20, 50, 100
16, 32, 64
32, 64
mm, .5mm
32, 64
32, 64
32150 3
CF1216
12" Flex
5R
10, 100
32153 4 CF1227me
12" Rigid
32, 64
32156 5
CF1234
12" Flex
4R
8, 16
32159 6
CF1276
12" Rigid
4R
8, 16
ECONOMY STEEL RULES
32036 0
300/1*
6" Flex
32, 64
Dec. Equiv.
32039 1
300/12*
Twelve No. 300 Rules on Display Card
32041 4 300mm* 150mm Flex
mm, .5mm
32042 1
300me*
6" Flex
mm, 64
Metric Equiv.
(150mm)
32046 9
301/1*
6" Flex
32, 64
32049 0 301me/1*
6" Flex
mm, 16
32060 5
305me
6" Flex
mm, 16
32063 6
307
6" Flex
8, 16
w/32nd End Grads
30266 3
308
6" Flex
32, 64
Dec. Equiv.
32072 8
310
6" Flex
32, 64
B & S Wire Gg.
32075 9
311me
6" Flex
mm-inch
Comparison
16, 32
32093 3 CF306md*
6" Flex
10, 50
mm, .5mm
* Furnished with pocket clip † Dimensions are approximate.
7/8
15/32
1
15/32
15/32
1
1
15/32
15/32
15/32
15/32
3/4
3/4
15/32
1
15/32
1
15/32
15/32
15/32
1/4
1/4
15/32
3/4
3/4
3/4
15/32
UPC Code No.
Range
31128 3 S98-4 One each of four sizes, AA-C,
listed below, packed in vinyl case
31130 6 S98-6 One each of six sizes, AA-E,
listed below, packed in vinyl case
31132 0 98AA 5/16" to 1/2"
31134 4 98A
1/2" to 3/4"
31136 8 98B
3/4" to 1-1/4"
31138 2 98C
1-1/4" to 2-1/8"
31140 5 98D 2-1/8" to 3-1/2"
31141 2 98E
3-1/2" to 6"
19 -32
S98-6
Wiggler/Center Finder Set
• The snap in ball and socket wiggler is essential for precise setups in
machine shops.
• Locates spindle centers and working points on drill presses, milling
and other machines.
• Four interchangeable point
attachments snap into
adjustable spring tension clutch
holder.
• Set includes snap in holder,
needle point, disc point, ball
shaft and indicator shaft packed
in a vinyl case.
UPC Code
31418 5
No.
S389-4
Replacement Parts for No. 389
UPC Code
31421 5
31424 6
31427 7
31430 7
No.
389NPS
389BS
389DS
389-IH
Description
Needle point shaft
Ball shaft
Disc point shaft
Offset indicator holder
Screw Pitch Gages
• These finely crafted measuring devices are used for gaging V,
American National or U.S. standard 60° threads.
• Gages are notched for measuring inside threads of small holes and nuts
as well as external threads.
• Set of 51 screw pitches combines all sizes from
4 to 84, including 11-1/2 and 27 pipe thread
sizes.
• Knurled thumb nuts lock the case in an open or
closed position.
• Also available in 22 pitch set No. 252 and metric
251
No. 255mm.
UPC
Code
31321 8
31323 2
31326 3
No. of
No. Pitches
Sizes
251
51
4 to 84
252
22
9 to 40
255mm
22
.35 to 6.0mm
Hand Tools
19
Width†
(in)
• These gages are used for quick and accurate measurement of
inside diameters of holes and widths of slots from which micrometer
measurements are taken.
• Both gaging ends are heat treated tool steel and ground to a radius for
measuring the smallest hole the gage will enter.
• Self centering action ensures accuracy.
• Long handled design provides improved
reach in deep holes and slots.
• Satin chrome finish.
• Available in sets of four and six.
WWW.HANESSUPPLY.COM
252
Albany/NE Division:
518.438.0139
Rochester Division:
585.235.0160
FAX:
FAX:
FAX:
716.826.4412
518.438.5343 CCISCO: 843.238.1338
585.235.0229
FAX: 843.238.8337
Hand Tools
General
®
Sheet Metal Gage
Feeler (Thickness)
Gages
• Made of the finest high grade
precision gage steel.
• Each leaf is etched with size
numbers in thousandths for quick
identification.
• Knurled lock nut holds the leaves
in desired position.
• Gages conform to government
specifications GGG-G-17b.
226
226T
• For gaging uncoated sheet metal, plate iron, and steel.
• Gage numbers are U.S. Standard 0 to 36, based on weights in ounces
per square inch.
• Decimal equivalents of each size are stamped on reverse side.
• Chrome finished, heavy gage tool steel is hardened
and tempered.
• 3-1/4" diameter, 3/32" thick.
• Conforms to government specifications GG-G-86b.
UPC Code No.
22041 7
21
Straight Leaf
· 3" leaves are 1/2" wide.
UPC Code
31300 3
31306 5
No. Leaves
Sizes
209
9
.0015" to .015"
226
26
.0015" to .025"
Screw and Wire Gage
Taper Leaf
· 3" leaves taper from 1/2" to just
1/4" wide for working in confined
spaces.
UPC Code No. Leaves
Sizes
31309 6
226T
26
.0015" to .025"
Drill Gages
• General’s drill gages are used to
quickly and conveniently identify
drill bit sizes.
• Made of heavy gage steel, machined
and ground to close tolerances.
• Hole sizes and decimal equivalents
are permanently etched on the face.
• No. 13 is 3" x 1-1/8" wide; Nos. 14,
15 and 35mm are 5" x 2" wide.
• No. 14 conforms to government
specifications GG-G-86b.
13
22009 7
23044 7
15
Letter size drills A to Z
3" x 1". Number size
drills 61 to 80
15
Number size drills
1 to 60
14
Fractional size drills
1/16 to 1/2 x 64ths
35mm Metric size drills to
13mm x 0.5mm
14
35mm
Stainless Steel Radius Gages
• A handy method for checking internal and external radii
of tools, patterns and dies.
• Each radius or fillet gage has both internal and external
radii for easy application.
• Radius sizes are stamped on each gage.
• Packed in vinyl case with
snap closure.
• Also available in 24 piece
set without holder No.
S435B or 24 piece set with
holder No. S435BH.
UPC Code
No.
435
31580 9
S435BH
UPC Code No.
22044 8
26
Ultratest® Electronic Micrometers
UPC Code No.
22003 5
12
22006 6
13
22012 7
• Front side measures American Standard wood screws No. 0 to 30 at one
edge, wire and screw diameters from 1/16" to 7/16" on opposite edge.
• Reverse side is graduated for Old or English Wire Gage (BWG) from 17
to 0000 on one edge. New Standard or American Wire Gage (AWG)
from 15 to 0000 on the opposite edge.
• Also includes 3" rule for
measuring screw lengths.
• Measures 4" x 1-3/8"
• Made of stainless steel.
S435BH
Size
Small (1/32" to 17/64" by 64ths)
Large (9/32" to 1/2" by 32nds)
16 small and 8 large sizes as above with holder
• American Standard wire gage 0 to 36 used for gaging non-ferrous wire
and metals such as copper, brass and aluminum.
• Chrome finished, heavy gage hardened and
tempered tool steel.
• Decimal equivalents of each size are stamped
on reverse side.
• 3-1/4" diameter, 3/32" thick.
UPC
Code
34145
34150
34155
34160
No.
MG9201C
MG9202C
MG9203C
MG9204C
Range Standard
(in)
(in)
0 to 1"
–
1 to 2"
1"
2 to 3"
2"
3 to 4"
3"
MG9204C
Ultratest® Electronic Digital Caliper
• Outside, inside and depth measurements are quickly obtained and read
out on the high contrast LCD display.
• Floating zero checks deviation from reference size, compensating for wear
and eliminating recalibration.
• True inch/metric conversion without rezeroing.
• Switchable inch/metric selector with resolution to .0005" or .01mm.
• Display indicates out of tolerance parts.
• Peak mode setting to indicate largest or smallest measurements of 2.
• Fully oil, dust and chip-proof.
• Body is hardened stainless steel, satin chromed with black scale divisions.
• Automatic shut off feature extends battery life to 12 months.
• Includes fitted case
and two type SR44G13
batteries and instructors.
• Compatible with
General's electronic
printers or interface.
UPC
Range
Code
No.
(in)
34121 MG8206 0 - 6
Resolution
Accuracy
Repeatability (in)
(in)
.0005 .0005
.001
Outside
Jaws (in)
1.6
Inside
Jaws (in)
.700
UPC Code No.
22036 3
20
WWW.HANESSUPPLY.COM
19 -33
19
Hand Tools
Wire Gage
• Large LCD is easily read to .0001"/.001mm and has a .00005" indicator.
• Micrometer operates as go/no-go gage with flashing LCD display.
• Makes true size or comparison measurements of part to master.
• Connects to the optional printer or interface.
• Features carbide tip anvils, satin chrome finish, ratchet thimble
and locking knob.
• Self-contained power of 3,000 to 5,000 hours. Auto-off after four minutes
of nonuse.
• Standard included with micrometers
of over 1".
MG9201C
• Includes fitted case, two batteries
(SR44G13) and instructors.
Albany/NE Division:
518.438.0139
Rochester Division:
585.235.0160
FAX:
FAX:
FAX:
716.826.4412
518.438.5343
585.235.0229
CCISCO: 843.238.1338
FAX:
843.238.8337
Hand Tools
General®
Ultratest® Vernier Calipers
Ultratest® Full Finish Micrometers
•
•
•
•
Permanent black graduations.
Satin chrome scale with 0-7" range.
Ultra fine graduations, .001" bottom, 1/20mm top.
Meets or exceeds federal
specifications for accuracy.
• Case included.
• Satin chrome finish frame and spindle.
• Accuracy .0001".
• .0001" graduations, .00003" flatness, .00005" parallelism.
• Decimal equivalents.
• With friction thimble.
UPC Code
No.
33470 1
MG7002DC
UPC Code
No.
Range (in)
33265 3
MG1950C 0" to 1"
Industrial Tweezers
Ultratest® Depth Micrometers
•
•
•
•
•
•
Base made of tool steel, hardened, precision ground and microlapped.
Satin chrome finish.
Ratchet stop for accurate repetitive measurement.
.001" graduations, accuracy to .0003".
Spanner wrench is included.
Fitted wooden case.
UPC
Code
33340 7
33345 2
33350 6
33355 1
No.
MG1723
MG1726
MG1743
MG1746
Range
(in)
0" to 3"
0" to 6"
0" to 3"
0" to 6"
Base No. of
(in) Rods
2-1/2"
3
2-1/2"
6
4"
3
4"
6
MG1723
General's quality tweezers for toolmakers,
repairmen, electronic assemblers and
other professionals.
UPC Code
No.
42263 7
401XX
42266 8
403
42269 9
407
42271 2
408
42280 4
410
42283 5
411
42286 6
412
42289 7
413`
Point Style
Strong Sharp
Blunt serrated
Blunt (soldering)
Sharp bent
Narrow sharp
Sharp (self closing)
Blunt (slide lock)
Sharp
Length
4-1/2"
6"
4"
407 408
4-1/4"
410
4-1/4" 401XX
411
4-3/4"
6-1/2"
4-1/2"
403
412
413
Mini Mechanical Pickup
®
Ultratest Electronic Digital Caliper
• Outside, inside and depth measurements are quickly obtained and read
out on the high contrast LCD display.
• Floating zero checks deviation from reference size, compensating for
wear and eliminating recalibration.
• Switchable inch/metric selector with resolution to .0005" or .01mm.
• Display indicates out of tolerance parts.
• Peak mode setting to indicate largest or smallest measurements of 2.
• Fully oil, dust and chip-proof.
• Body is hardened stainless steel, satin chromed with black scale
divisions.
• Automatic shut off feature extends battery life to 12 months.
• Includes fitted case and two type SR44G13 batteries and instructors.
• Compatible with
General's electronic
printers or interface.
UPC Code
34121 1
Thumb lock
• Strong three prong steel jaws retrieve small objects up to 1/2".
• Knurled 4-3/4" x 1/4" body with tapered point for hard-to-reach work areas.
• Smooth traveling plunger actuator for greater control.
• Chrome finish to prevent rust.
• Can be used as a screwstarter.
UPC Code
42214 9
No.
388
Jeweler’s Screwdrivers
For jewelers, instrument makers, sub miniature parts assemblers, and
model makers.
• Set of Six Jeweler's Screwdrivers
• Nickel plated blade sizes: .100", .080", .070", .055", .040", .025".
• Screw chucks have identification rings showing blade size.
• Overall length 3-7/8".
• Conforms to government specifications GGG-S-1808.
• Plastic case.
UPC Code
No.
42568 3
SPC600 Plastic Case
No.
MG8206
Individual Screwdrivers
®
Ultratest 6" Dial Caliper
• Large clear dial accurately reads to .001".
• Satin chrome scale with clearly engraved tenths of inch/mm graduations.
• Covered rack ensures precision accuracy by preventing dirt and chips
from entering rack mechanism.
• Meets or exceeds federal specifications for accuracy.
• Deluxe fitted case.
UPC Code
33475 6
Hand Tools
19
Ultratest® Single Revolution Dial Caliper
Large dial with wider spaced graduations for easier reading.
• One revolution for each .100".
• Friction roller for rapid setting and easy adjustment; knurled lock for
repetitive measurements and gaging.
• Satin chrome, non-glare 6" scale has micro fine graduations in tenths
of inch/mm.
• Dual pinion mechanism reduces wear and covered rack prevents
accumulation of dirt in gear teeth.
• Meets or exceeds federal specifications for accuracy.
• Fitted case for storage; comes with instructions.
19 -34
No.
600-0
600-1
600-2
600-3
600-4
600-5
SPC600
Blade
Width (in)
.100
.080
.070
.055
.040
.025
Pocket Caliper
• Stainless steel slide caliper with inside and outside
readings in metric and inches.
• Decimal equivalents.
• 3" capacity.
No.
MG-JDC6
UPC Code
No.
33457 2
MG6100
UPC
Code
42515 7
42518 8
42521 8
42524 9
42527 0
42530 0
UPC Code
44136 2
No.
132me
Grads
32nds and mm
Utility Vernier Calipers
• Economical steel vernier calipers have 5" capacity.
• Inside and outside jaws and full-length depth gage.
• Friction roller adjustment.
• Slide lock for gaging.
Fractional scale vernier caliper
• Graduated in 16ths and 32nds
of an inch with vernier reading
of 1/128".
UPC Code
42574 4
No.
721
WWW.HANESSUPPLY.COM
132me
Albany/NE Division:
518.438.0139
Rochester Division:
585.235.0160
FAX:
FAX:
FAX:
716.826.4412
518.438.5343 CCISCO: 843.238.1338
585.235.0229
FAX: 843.238.8337
Hand Tools
General
®
4 Power Pocket Illuminated Magnifier
Power Alnico Magnets
• Handy 4 power magnifier has plastic body and lens.
• Replaceable bulb and batteries are included.
• Strong magnetic pull for lifting, holding, sorting,
clamping, or retrieving steel or iron parts.
• Hole in top of magnet for attaching conveyors,
racks and welding jigs.
UPC Code No.
Power
42456 3
553/1
Ind. Carded
4
42447 1
553BB Replace bulb 2-batteries
370-4
UPC
Code
42044 2
42047 3
42050 3
42053 4
42056 5
42059 6
42061 9
42064 0
42067 1
4" Illuminated Magnifier
•
•
•
•
•
4" diameter with 3-power lens covers large areas of print.
5-power bifocal lens insert gives even greater magnification.
Bulb gives wide circle of illumination.
Plastic body and optical plastic lens.
Replaceable bulb and batteries included.
UPC
Code
42462 4
Focal
Lgth. (in)
3-1/3"
2"
No.
Power
554
3.0
Bifocal
5.0
No.
370-2
370-3
370-4
370-6
370-8
370-10
370-12
370-16
370-24
Size
(oz)
2
3
4
6
8
10
12
16
24
Approx.
Pull
(lbs)
13
17
22
30
32
37
42
50
70
Pole Opening
Width Height Depth Width Between
(in)
(in)
(in)
(in) Poles (in)
1-1/8
3/4
3/4
1/4
9/16
1-5/16 1-3/8
5/8
3/8
5/16
1-1/2
1
1
5/16
3/4
1-3/4 1-1/8 1-1/8 5/16
7/8
2-3/16 1-13/16 15/16 1/2
1-3/16
2-7/16
2
15/16 5/8
1-3/16
2-5/8 2-1/4 15/16 5/8
1-3/8
3
2-1/2 15/16 3/4
1-1/2
2-1/2 1-13/16 1-7/8 5/8
1-3/8
Cored Oz. Wt.
Hole Each w/
(in) Keeper
3/16
3
4
3/16
5
3/16
8
3/16
10
1/4
13
1/4
15
1/4
20
1/4
28
Magnetic Adjustable Welding Links
Oblong Illuminated Magnifier
• Lens measures 2" x 4" for distortion free magnification of large areas.
• Reversible light reflector adapts for right or left-hand use.
• 2.5 power shatterproof lens, with
5 power bifocal insert.
• Replaceable bulb and batteries
are included.
UPC
Code
42509 6
No.
Power
565
2.5
Bifocal
5.0
Focal
Lgth. (in)
4"
2"
• For holding steel plates in position for welding, brazing and soldering.
• Eliminates need for clamps or temporary fastening.
• Constructed of two heavy duty Alnico magnetic blocks linked together
with strong steel bar and wing nuts for
easy angle adjustment.
UPC
Code
No.
42108 1 375
Size of
Block
2" x 1" x 1"
Wt.
(lbs)
1-1/2
Extra-Long, Magnetic Pickup w/Pivot Joint
Inspection Mirrors
• These mirrors facilitate inspection of inaccessible workpieces and
machines by toolmakers, assemblers, inspectors, and mechanics.
• Fully polished mirrors are enclosed in plated holders which are attached
to knurled handles with ball socket joints.
• Nos. 557 and 560 have telescoping arms and vinyl cushion grip handles.
558
555
• An excellent tool for retrieving steel parts from hard-to-reach places.
• High-power neodymium magnet lifts up to five pounds and will never lose
its magnetism.
• Steel body measures 13" and can be extended to 27".
• Locking pivot joint allows user to pick up objects around corners.
• Body is chrome plated, with a vinyl cushion grip handle.
UPC Code
42228 6
No.
394
Pull (lbs)
5
394
Telescoping High-Power Magnetic Pickup
557
• A powerful permanent magnetic pickup tool.
• Ideal for retrieving steel and iron parts from hard-to-reach work areas.
• Magnet is fitted in a 5-1/2" long nickel-plated steel handle that can
extend up to 23-1/2".
• Holder is fitted with a pocket clip.
560
UPC Code
42465 5
42468 6
42471 6
42473 0
No.
Size (in)
Overall Lgth. (in)
555
1-1/4" dia.
8"
557
2-1/4" dia.
10-1/2" extends to 15"
558
1" by 2" oval
9"
560 3-1/2" x 2" oblong 11-1/2" extends to 16"
UPC Code
42206 4
42208 8
Button Type Alnico Magnets
• Button shaped magnet has almost unlimited applications.
• Retrieves screws and steel parts.
• Center hole in top of magnet for easy fastening.
Dia.
(in)
1/2"
3/4"
1"
1-1/4"
1-1/2"
372
Size
No. (oz)
371
1/2
370-1
1
Pull Opening Between
(lbs)
Poles (in)
1
1/4"
2-1/4
1/4"
• An excellent tool for retrieving steel parts from hard-to-reach places.
• High-power neodymium magnet is six times more powerful than a cobalt
magnet of the same size and density.
• Knurled aluminum body with flexible 15" wire.
• Overall length is 20".
• Lifts up to 2 pounds.
395
UPC Code
42229 3
371
No.
395
Pull (lbs)
2
Glass cutter
Pocket Horseshoe Alnico Magnets
UPC
Code
42039 8
42041 1
383NX
Flexible Magnetic Pick Up
Ht.
Pull
Cored
(in) (lbs) Hole (in)
3/8" 1-1/2
1/8"
1/2"
4
1/8"
5/8" 6-1/2
3/16"
3/4"
14
1/4"
7/8" 18-1/2 3/16"
• Small but powerful magnet.
• For retrieving small steel parts and screw
from hard-to-get-at places.
Pull
6 oz.
2 lbs.
370-1
• Cuts plate glass from 1/8" to 1/4" thick.
• Steel wheel with honed angle of 120-degrees for cutting single
and double strength glass.
• Ball end handle for snapping of scored glass.
• Tooth design to remove rough edges.
UPC Code
43061 8
No.
8501
WWW.HANESSUPPLY.COM
Length
5"
19
Hand Tools
UPC
Code
No.
42073 2 372A
42076 3 372B
42079 4 372C
42082 4 372D
42085 5 372E
No.
383X
383NX
8501
19 -35
Albany/NE Division:
518.438.0139
Rochester Division:
585.235.0160
FAX:
FAX:
FAX:
716.826.4412
518.438.5343
585.235.0229
CCISCO: 843.238.1338
FAX:
843.238.8337
Hand Tools
Greenlee®
Mechanical Benders for IMC and Rigid
Conduit
Greenlee®
BENDING & CUTTING PRODUCTS
SITE-RITE® Heat-Treated Aluminum and
SITE-RITE II® Malleable Iron Hand Benders
Both Benders feature:
• Handle straight up and down for 30O bends.
• Patented sight indicator on bender is a key feature for bending angles
fast and easy.
• Non-slip, contoured pedal for added leverage.
• Strong, stable square hook design.
• Cast-in markings for stub-ups, saddle bends, back-to-back bends and
head-up or down bending.
SITE-RITE® Aluminum Benders feature:
Site-Rite
• Special design and heat-treated aluminum
construction make this patented hand bender
significantly stronger.
• Cast-in offset multipliers.
®
Centerline Bending Radii
EMT
(in)
1/2
3/4
1
1-1/4
1-1/4
Rigid
IMC (in)
Cat. No.
840
841
842
843
840H
841H
842H
8840
8841
8842
8843
8840H
8841H
8842H
845
846
1/2
3/4
1
1
Centerline
Radii (in)
4-3/16
5-1/8
6-1/2
11
9-5/8
UPC No.
23533
23392
23564
23667
32917
32918
32919
35094
35095
35096
35097
35482
35483
35484
25567
25568
Heat-Treated Malleable
Aluminum
Iron
840, 840H 8840, 8840H
841, 841H 8841, 8841H
842, 842H 8842, 8842H
843
–
–
8843
Site-Rite II®
Description
SITE-RITE® Hand Bender for 1/2" EMT
SITE-RITE® Hand Bender for 3/4" EMT, 1/2" Rigid, IMC
SITE-RITE® Hand Bender for 1" EMT, 3/4" Rigid, IMC
SITE-RITE® Hand Bender for 1-1/4" EMT, 1" Rigid, IMC
SITE-RITE® Hand Bender with handle for 1/2" EMT
SITE-RITE® Hand Bender with handle for 3/4" EMT, 1/2" Rigid
SITE-RITE® Hand Bender with handle for 1" EMT, 3/4" Rigid
SITE-RITE II® Hand Bender for 1/2" EMT
SITE-RITE II® Hand Bender for 3/4" EMT, 1/2" Rigid, IMC
SITE-RITE II® Hand Bender for 1" EMT, 3/4" Rigid, IMC
SITE-RITE II® Hand Bender for 1-1/4" EMT, 1" Rigid, IMC
SITF-RITE II® Hand Bender with handle for 1/2" EMT
SITE-RITE II® Hand Bender with handle for 3/4" EMT, 1/2" Rigid
SITE-RITE II® Hand Bender with handle for 1" EMT, 3/4" Rigid
Handle for 1/2" and 3/4" hand benders
Handle for 1" hand benders
HICKEYS with Welded Handles
Hand Tools
19
1800, 1800G1
1801, 1801G1
Cat. No.
1800
1800G1
1/2" Rigid Conduit
3/4" Rigid Conduit
1" Rigid Conduit
1-1/4" Rigid Conduit
1-1/2" Rigid Conduit
UPC No.
24400
24401
1801
1801G1
24753
24507
32416
32416
32416
32416
Shoe Size
1/2" EMT
1/2" IMC/Rigid
3/4" EMT
3/4" IMC/Rigid
1" EMT
1" IMC/Rigid
38650
01711
38863
01648
38780
38148
01700
38962
Description
Hickey for 1/2" Rigid
Hickey for 3/4" Rigid
Hickey for 1" Rigid
Inches
4-5/16"
4-1/4"
5-1/2"
5-7/16"
7"
6-15/16"
UPC No.
08550
38650
01711
38863
01648
38780
38148
01700
38962
• Bends offsets in one easy operation. Insert conduit, depress
handle completely, release and remove conduit.
• Makes identical offsets every time for
wall mounted boxes with exposed conduit.
19 -36
UPC No.
13815
14159
Description
Mechanical Bender for 1/2", 3/4", 1" IMC and Rigid conduit
Mechanical Bender w/o undercarriage, for bench or truck bed
mounting. Bends 1/2", 3/4", 1" IMC and Rigid conduit
Mechanical Bender for 1-1/4", 1-1/2" IMC and Rigid conduit
Mechanical Bender w/o undercarriage, for bench or truck bed
mounting. Bends 1-1/4", 1-1/2" IMC and Rigid conduit
Undercarriage Unit for 1800
Undercarriage Unit for 1801
• Bends a variety of types and sizes of conduit.
• Intelligent pendant controls: Standard (included), digital readout
and programmable bend angles for accurate repeat bends.
Deluxe (optional), interactive control – calculates complete layout
measurements for various types of bends.
• Bends 1/2" to 2" EMT, IMC, Rigid and Rigid aluminum conduit without
any shoe changes. No loose parts to get lost.
• Two operating positions; table top and upright.
• Optional shoes available to bend PVC coated
steel conduit.
• Adjustable leveler pads.
• Excellent portability. Convenient lifting eyes.
• Weather resistant construction.
Little Kicker® Offset Bender
Cat. No.
1810
1811
2-5/8"
4-5/8"
5-7/8"
8-1/16"
9-11/16"
Electric Conduit Bender for 1/2" to 2"
EMT, IMC, Rigid and Rigid Aluminum
Cat. No.
855
• Heavy-duty cast steel head.
• Welded steel handle.
• Bend tight radius stub-ups.
UPC No.
18102
18103
18104
Ratchet action for increased leverage.
Bypass the ratchet for fast, direct bending on smaller sizes.
Heavy-duty welded construction for long, reliable service.
Built-in bending degree indicator and easy to use
bending charts for accurate, consistent bends.
Use a 5' (1.5 m) length of 1" Rigid conduit for the handle.
NOTE: The 843 and 8843 Hand Benders require the addition of a 5' (1.5m) length
of 1-1/4" Rigid conduit threaded one end for a handle.
Cat. No.
508
512
516
•
•
•
•
Description
Offset Bender for 1/2" EMT
Offset Bender for 3/4" EMT
WWW.HANESSUPPLY.COM
Shoe Size
1-1/4" EMT
1-1/4" IMC/Rigid
1-1/2" EMT
1-1/2" IMC/Rigid
2" EMT
2" IMC/Rigid
Inches
8-13/16"
8-3/4"
8-3/8"
8-1/4"
9-1/4"
9"
Description
Smart BenderTM for 1/2" - 2" EMT, IMC and Rigid conduit
(includes Standard Pendant)
Deluxe Pendant for older bender with serial code ZW
Deluxe Pendant for current bender with serial code ABL
Standard Pendant for older bender with serial code ZW
Standard Pendant for current bender with serial code ABL
Shoe Unit, 1/2" - 1-1/4"
Shoe Unit, 1-1/2" - 2"
PVC Shoe Unit, 1/2" - 2" for bender with serial code ABL only
Vinyl Rain Cover
Albany/NE Division:
518.438.0139
Rochester Division:
585.235.0160
FAX:
FAX:
FAX:
716.826.4412
518.438.5343 CCISCO: 843.238.1338
585.235.0229
FAX: 843.238.8337
Hand Tools
Greenlee
®
Electric Conduit Bender for
1/2" thru 2" Conduit and Pipe
Rigid Conduit Bender for
1", 1-1/4", 1-1/2" & 2"
• Fast and easy way to bend up thru 2" conduit.
• Remote pendant control and bending data charts
for easy, accurate bends.
• Simple setup and easy operation for correct,
consistent bends.
• Portable, has large handle, excellent balance
and heavy duty wheels.
• Squeeze adjustment to compensate for variations
in EMT conduit.
• Will make 180O one shot bends in 1/2" thru 2"
Rigid conduit.
• Strong, portable pin-assembled aluminum
components.
• Easy-to-use ram travel scale and bending
charts.
• Conduit supports index to suit all sizes.
• Model available to bend PVC coated rigid conduit.
Centerline Bending Radii for 880 & 880 PVC Benders
Rigid Shoe Size
1/2"
Bending Radius-Inches
4"
Bending Radius-cm
10.16
Cat. No. UPC No. Description
555*
39780
Electric Bender power unit without bending accessories
555R
23446
Electric Bender with shoe groups for 1/2" thru 2" Rigid and 1/2" thru
1-1/4" IMC conduit and pipe includes 28007-1/2"-2" Rigid Shoe Group
and two 53389-Hinge Pins
555E
27989
Electric Bender with shoe group for 1/2" thru 2" EMT conduit
Includes 23802-1/2"-2" EMT Shoe Group and two 53389- Hinge Pins
555I
27990
Electric Bender with shoe group for 1-1/2" and 2" IMC conduit Includes
26330-1-1/2" - 2" IMC Shoe Group and two 53389- Hinge Pins
555-22 39971
220 VAC 50/60 Cycle Electric Bender power unit w/o bending accessories
53389 53389
Hinge Pin for 555 & 555-22
Cam Track® Conduit Benders for 2-1/2" to
4" EMT, IMC and Rigid
• One bender to bend EMT, IMC and Rigid Conduit.
• Fast and easy set-up on the job site.
• True one shot 90O bends with CT models for quick accurate bends.
• Steel reinforced follow bars for long life.
• Bend a 90O elbow in 4" Rigid conduit in 95 seconds.
• Optional 1813 Bending Table and accessories for easier operation.
• Patented.
861
881 CT, 881 CTD, 881 BASIC
Centerline Centerline
Size
Radius
Radius
Shoe
Degree
(in)
(in)
(in)
Group of Bend
2-1/2 13-1/2
13-1/2
27554
90
3
16
16
27555
90
3-1/2 18-5/8
18-5/8
31281
90
4
21
20-7/8
31274
90
3-1/2
18-5/8
27556
45
4
21
27557
45
#881 Basic Only
Cat. No.
881CT
Cat. No.
880
88OH755
880E975
880PVC
UPC No.
16480
16464
34200
33613
1802
21357
10917
10918
21257
21357
10917
10918
3/4"
4-1/2"
11.43
1"
5-3/4"
14.60
1-1/4"
7-1/4"
18.41
1-1/2"
8-1/4"
20.95
2"
9-1/2"
24.13
Description
1", 1-1/4", 1-1/2" & 2" Rigid Conduit Bender w/o hydraulic pump
1", 1-1/4", 1-1/2" & 2" Rigid Conduit Bender w/ 755 Hand Hydraulic Pump
1", 1-1/4", 1-1/2" & 2" Rigid Conduit Bender w/ 975 Electric Hydraulic Pump
1", 1-1/4", 1-1/2" & 2" 40 Mil PVC Coated Rigid Conduit Bender w/o
hydraulic pump
Bending Table
Conduit Support Pin for use w/ 1802 Bending Table - (2) Required
1/2" Shoe
3/4" Shoe
Note: Please call for information on individual parts.
PVC Heating Blankets for up to 4",
All schedules
• Make bends, offsets or saddles in PVC fast and easy.
• Easy to use: wrap blanket around PVC, secure with hook and loop strap.
Built-in stiffeners help keep the blanket tight to the PVC surface. Remove
blanket and form bend by hand.
• Controlled, even heating for uniform bending.
• Tough cord and thermostat for long life.
• Temperature over 300O F.
Cat. No
860-1-1/2
860-3
860-4
UPC No.
31486
31487
31488
Description
PVC Heating Blanket tor up to 1-1/2"
PVC Heating Blanket for 2" - 3"
PVC Heating Blanket for 3-1/2" and 4"
Specifcations:
860-1-1/2
Up to 1-1/2" PVC
All Schedules
Power Source: 120 VAC
Size:
13" x 8-1/4"
Weight:
1.7 lbs.
Capacity:
Shown with optional
1813 Bending Table
860-4
3-1/2" - 4" PVC
All Schedules
120 VAC
38" x 16-1/4"
4.9 lbs.
Electric PVC Heater/Bender for 1/2" - 2",
All schedules
• Easy to use: preheat for 10 minutes, insert PVC, rotate until pliable,
remove and form bend.
• Sturdy double wall metal with fiberglass insulation and reflective interior
for fast, even heat.
• Full length door for easy PVC loading and removal.
• Other features include on/off switch, pilot light and carrying handle.
Cat. No
UPC No.
849
27395
27811
27811
Specifcations:
Description
Electronic PVC Heater for 1/2" - 2"
Calrod Heating Element
19
Capacity:
1/2" - 2" PVC All Scheduals
Power Source: 120 VAC 20 AMP or 3000 Watt Generator
Weight:
15 lbs.
WWW.HANESSUPPLY.COM
Hand Tools
UPC. No. Description
31287
Cam Track® Conduit Bender for One Shot 90O Bends in 2-1/2", 3",
3-1/2" and 4" EMT, IMC and Rigid conduit, without hydraulic pump
881CT-E980
34208
Cam Track® Conduit Bender for One Shot 90O Bends in 2-1/2", 3",
3-1/2" and 4" EMT, IMC and Rigid conduit, with 980 Electric
Hydraulic Pump
881CTD
38466
Cam Track® Conduit Bender for One Shot 90O Bends in 2-1/2", 3"
and 4" EMT, IMC and Rigid conduit, without hydraulic pump
881 CTD-E980 38467
Cam Track® Conduit Bender for One Shot 90O Bends in 2-1/2", 3" and
4" EMT, IMC and Rigid conduit, with 980 Electric Hydraulic Pump
881
27778
Conduit Bender for One Shot 90O bends in 2-1/2" and 3", Two Shot
90O Bends in 3-1/2" and 4" EMT, IMC and Rigid conduit, without
hydraulic pump
881-E980
34205
Hydraulic Conduit Bender for One Shot 90O Bends in 2-1/2" and
3", Two Shot 90O Bends in 3-1/2" and 4" EMT, IMC and Rigid conduit,
with 980 Electric Hydraulic Pump
881 BASIC
35711
Conduit Bender without shoe groups or hydraulic pump
27554
27554
2-1/2" - One Shot 90O EMT, IMC, Rigid Shoe Group
27555
27555
3" - One Shot 90O EMT, IMC, Rigid Shoe Group
31281
31281
3-1/2" - One Shot 90O EMT, IMC, Rigid Shoe Group
27556
27556
3-1/2" - 45O EMT, IMC, Rigid Shoe Group (requires 2 bends to make
a 90O)
31274
31274
4" - One Shot 90O EMT, IMC, Rigid Shoe Group
27557
27557
4" - 45O EMT, IMC, Rigid Shoe Group (requires 2 bends to make a
90O)
1813
28901
Bending Table for 881 Series Bender
881A
27553
Converts 884 or 885 to an 881
860-3
2" - 3" PVC
All Schedules
120 VAC
30" x 13-1/4"
3.3 lbs.
19 -37
Albany/NE Division:
518.438.0139
Rochester Division:
585.235.0160
FAX:
FAX:
FAX:
716.826.4412
518.438.5343
585.235.0229
CCISCO: 843.238.1338
FAX:
843.238.8337
Hand Tools
Greenlee®
Electric PVC Heater/Bender for 1/2" - 6",
All schedules
Optional
• Easy to use: preheat for 10
PVC Plug
minutes, open lid and position PVC, close lid, rotate
until pliable, open lid, remove
230 VAC
30 AMP
PVC and form bend. 848
model has motorized rotation.
• Heavy duty metal construction
Optional 857
with reflective interior for fast,
Roller Support
efficient heating.
• Has heating chart,
timer, and on/off
847
30866
Electric PVC Heater / Bender for 1/2" - 6"
switch with indicator
30867
Electric PVC Heater Bender with Motorized
light for added con- 848
PVC Rotation for 1/2" - 6" All Schedules
venience.
31092
31092
Motorized PVC rotation kit for 847
• Double doors with
857
31093
PVC Roller Support
piano hinges allow
30908
30908
Calrod Heating Element
heating shorter
Specifications:
lengths with one
door open.
Power Source: 230 VAC 30 AMP or 7000 Watt Generator
Length:
71 in.
• Sturdy wheels for
Weight:
847 - 78 lbs. / 848 - 80 lbs.
easy mobility.
PVC Cutter for up to 1-1/4"
• Ratchet action for fast, easy cutting.
• Heat-treated, replaceable steel blade for long cutting life.
• Rugged metal alloy frame for durability.
Cat No. UPC No.
864
04253
00355
00355
Specifications:
Description
PVC Cutter for up to 1-1/4"
Replacement Blade Kit
Capacity: up thru 1-1/4" PVC
Weight: .9 lbs.
HOLEMAKING:
Knockout Punches
• The contractor's choice - worldwide.
• Unique punch profile splits slugs allowing easy
slug removal.
• Use with manual, ratchet, hydraulic or battery
powered drivers.
• Uses standard Greenlee dies and draw studs.
• Available in sizes up thru 2.52"
• U.S. Patent #4,543,722
Unique Slug Buster® punch
design creases slug as the
punch is drawn into the die.
Slug is split in half as
punching operation is
completed.
Split slugs fall free
from the die and stud.
Specifications:
Capacity:
Mild steel up thru 10 gauge.
Application: Punch mild steel, aluminum, fiberglass and plastic.
Hole Size:
Conduit Sizes - Hole size is outside diameter of US conduit sizes.
Example: 1/2" conduit size punch actually makes a 7/8" hole.
Pg Sizes - European standard pipe sizes. (not shown, call for Pg specs)
ISO Sizes - International Standards Organization pipe sizes.
Operation: Operate manually, or with ratchet, hydraulic or battery drivers.
When used with ratchet, hydraulic or battery drivers, buy the
punch and die only; the draw stud is part of the driver kit
Hole Size
Conduit
Punch Unit*
Actual
Pipe
Cat. No.
UPC No. Size (in) in
in
7211B-1/2
31962
1/2
7/8
0.885
7211BB-3/4
31963
3/4
–
1.115
7211BB-1
31964
1
–
1.362
7211BB-1-1/4 31965
1-1/4
–
1.701
7211BB-1-1/2 31966
1-1/2
–
1.951
7211BB-2
31967
2
2-3/8 2.416
ISO
–
–
–
–
–
–
Cap.
Mild
Steel
GA.
10
10
10
10
10
10
Wt.
(lbs)
0.3
0.8
1
1.3
2.1
3.2
"Custom Size"
punches and
dies available.
Please contact
us with your
requirements.
* Punch Unit
Includes:
Punch, Die &
Draw Stud
- Please call
for information on
replacements
for these
items
Flex Splitter® BX and
Flexible Conduit Cutter
• Cut flexible metal conduit in seconds with a
few turns of the crank and an easy twist of
the conduit.
• Ample clearance between handle and body
for comfortable operation.
• Cut flexible metal conduit in seconds with a
few turns of the crank and an easy twist of
the conduit.
• Ample clearance between handle and body for comfortable operation.
• Set conduit size for multiple cuts of the same size conduit. No need to reset.
• Compact and lightweight. Fits easily in back pocket or tool pouch.
• Set blade adjustment with only a screwdriver.
• Convenient in-handle blade storage - holds up to five spare blades.
• Point-of-purchase packaged. Blades point-of-purchase packaged
1 and 5 blades per package.
Cat No. UPC No.
1940
34953
1941-1 33735
1941-5 00288
Specifications:
Description
Flex Splinter® Flexible Metal Conduit Cutter
Single Blade Replacement Blade for 1940
5 Pack Replacement Blades for 1940
Knockout Punch Kits for
Ratchet/Hydraulic Drivers
• Boxed in carton for easy insertion
into your existing case.
• Replacement punch kits for ratchet,
hydraulic & battery powered drivers.
Cat.
No.
721-1/2
721-3/4
721-1
721-1-1/4
721-1-1/2
721-2
UPC
No.
31756
31757
31758
31759
31760
31761
Conduit
& Pipe
Desc.
Size (in)
1/2" Conduit Size Punch
1/2
3/4
1" Conduit Size Punch
1
1-1/4" Conduit Size Punch 1-1/4
1-1/2" Conduit Size Punch 1-1/2
2
Capacity: 14/2 to 10/4 BX 3/8" flexible metal conduit
Weight: 1940 - 4 lbs.
Hand Tools
19
19 -38
WWW.HANESSUPPLY.COM
Hole Size
Actual
(in)
7/8
–
–
–
–
2-3/8
(in)
.885
1.115
1.362
1.701
1.951
2.416
ISO
–
–
–
–
–
–
Cap.-Mild
Steel
GA
10
10
10
10
10
10
Albany/NE Division:
518.438.0139
Rochester Division:
585.235.0160
FAX:
FAX:
FAX:
716.826.4412
518.438.5343 CCISCO: 843.238.1338
585.235.0229
FAX: 843.238.8337
Hand Tools
Greenlee
Hydraulic Punch Driver and Kit
Manual Knockout Kit with
Ratchet Wrench
• 1" Hex Ratchet Wrench allows use with both
3/8" and 3/4" draw studs.
• High impact rugged plasfic carrying case.
Cap. Mild Steel Wt.
Cat. No. UPC. No. Desc.
GA
(lbs)
7238SB 34757
1/2" - 2" Conduit Size Manual Slug10
10
Buster® Knockout Punch Kit
7238SB/34757 Slug Buster® Knockout Punch Kit Includes:
Cat. No.
34941
721-1/2
14722
721-3/4
124AV
721-1
126AV
721-1-1/4
128AV
721-1-1/2
440AV
721-2
442AV
00042
304AVBB
34758
UPC. No.
34941
31756
14722
31757
06972
31758
04011
31759
04013
31760
04061
31761
04063
00042
04042
34758
Hole Size
Actual
(in)
(in)
Desc.
Ratchet wrench - 1" Hex
7/8
.885
1/2" Conduit Size Die
7/8
.885
–
1.115
–
1.115
–
1.362
1" Conduit Size Die
–
1.362
1-1/4" Conduit Size Punch
–
1.701
1-1/4" Conduit Size Die
–
1.701
1- 1/2" Conduit Size Punch
–
1.951
–
1.951
2-3/8
2.416
2" Conduit Size Die
2-3/8
2.416
Ball Bearing Draw Stud w/1" Hex Head-3/8" x 3"
Draw Stud-3/4" x 2-15/16"
Plastic Case
Manual Knockout
Punch Kits
UPC. No.
32013
7237BB
30214
UPC
No.
31756
14722
04045
31757
06972
31758
04011
31759
04013
04040
31880
Cap. Mild Steel
Desc.
GA
1/2" - 1-1/4" Conduit Size Manual
10
®
Slug Buster Knockout Punch Kit
1-1/2" and 2" Conduit Size Manual
10
Slug Buster® Knockout Punch Kit
Desc.
Draw Stud-3/8" x 1-9/16"
1" Conduit Size Die
Draw Stud-3/4" x 2-1/8"
Plastic Case
Hole Size
Actual
(in)
(in)
7/8
.885
7/8
.885
–
–
–
–
–
–
1.115
1.115
1.362
1.362
1.701
1.701
UPC
No.
31760
04061
31761
04063
04042
32012
Desc.
2" Conduit Size Die
Draw Stud-3/4" x 2-15/16"
Plastic Case
UPC
No.
34292
34293
7804E
34291
7804ESB
35611
7804ISO
35614
7904SB
7906SB
33794
34300
7904E
34299
7904ES8
35615
7904ISO
35616
Description
Quick DrawTM Driver, 3 draw studs, 2 adapters, 1 spacer & case
Standard- Quick DrawTM Driver, 1/2" thru 2" Slug Buster® conduit
size punches & dies 2 draw studs, 1 adapter, 1 spacer & case
Metric - Quick DrawTM Driver, 2 draw studs, 1 adapter,
1 spacer & case
Metric - Quick DrawTM Driver, Slug-Buster® Pg punches & dies
15.2 mm thru 30.5 mm, 2 draw studs, 1 adapter, 1 spacer & case
Metric - Quick DrawTM Driver, Slug-Buster® ISO punches & dies
Quick Draw 90TM Driver, 2 draw studs, 1 adapter, 1 spacer & case
Quick Draw 90TM Driver, 1/2" thru 2" Slug-Buster® conduit size
punches, dies and draw studs & case
Metric - Quick Draw 90TM Driver, 2 draw studs,
1 adapter, 1 spacer and case
Metric - Quick Draw 90TM Driver, Slug-Buster® Pg punches & dies
Metric - Quick Draw 90TM Driver, Slug-Buster® ISO punches &
dies 16.2 mm thru 40.5 mm, 2 draw studs, 1 adapter,
1 spacer & case
Wt.
(Ibs)
10
14
9.4
10.3
11.4
10
14
11
11
12.2
Hole Size
Actual
in
in
–
1.951
–
1.951
2-3/8 2.416
2-3/8 2.416
Wt.
(lbs)
2.7
5.2
• Punches a hole for 2" conduit in only 12 seconds.
• Angled pistol grip allows easy one handed control and positioning.
• Tool senses when the hole is completely punched and automatically
shuts off to prevent damage to the punch and die.
• Develops 6.7 tons of hydraulic force, capable of punching up to 2"
conduit size holes in 10 gauge mild steel and 12 gauge stainless steel.
• Three choices of battery chargers - 115 volt, 220 volt or 12 volt.
Punches approximately 80-1/2" conduit size holes or 40 2" conduit
size holes in 10 gauge mild steel per battery charge.
Specifications:
Wt. (driver with battery only):
Overall Lgth. (ram retracted):
Height:
Max. Punch Force:
Max. Round Punch Size:
(in 10 gauge mild steel)
Max. Square Punch Size:
Max. Rectangular Punch Size:
Max. Ram Travel:
Charging Time:
Battery Voltage:
Cat. No.
LS6011A
LS6012A
LS6022A
L56011B
LS6012B
LS6022B
8.25 lbs.
10.3"
11.5"
6.7 tons
2.42" dia.
LS6012A
2-11/16" x
2-11/16"
1.378" x
2.559"
0.87"
Approx. 1 hr.
12 volts NiCd
UPC No. Descnption
03557
Battery powered driver with 115 volt charger, 2 batteries,
3 draw studs, 2 adapters, and 1 spacer and case
03558
03559
04311
1/2" thru 2" Slug Buster® conduit size punches,
04661
04312
WWW.HANESSUPPLY.COM
Wt. (lbs)
23
23
23
27
27
27
19 -39
19
Hand Tools
7237BB/ 32014 Slug Buster® Knockout Punch Kit Includes:
Cat.
No.
721-1-1/2
440AV
721-2
442AV
304AVBB
32012
Cat.
No.
7804SB
7806SB
Battery Powered Knockout Punch Driver Kits
7235BB/ 32013 Slug Buster® Knockout Punch Kit Includes:
Cat.
No.
721-1/2
14722
32AVBB
721-3/4
124AV
721-1
126AV
721-1-1/4
128AV
249AVBB
31880
The Quick DrawTM and the Quick Draw 90TM feature:
• Optional step-saver adapter converts standard Greenlee punches thru
1-1/4" conduit size to use 7/16" draw stud (adapter and draw stud
included with 7804SB only).
• Compact, lightweight design for portability &
fast, easy one-person operation.
• Develops 8 tons of hydraulic force for easy
punching, even in 10-gauge stainless steel
7804SB
depending on individual punch capacities.
• Quick Draw is perfect for fast, straight-on front
panel punching.
• Quick Draw 90’s right angle driver head
rotates over 180 degrees for maximum flexibility in tight working areas.
7235BB
• Assortment of commonly used Slug Buster®
knockout punches, packaged to meet the
contractor's needs.
• High impact rugged
plastic carrying case.
Cat. No.
7235BB
®
Albany/NE Division:
518.438.0139
Rochester Division:
585.235.0160
FAX:
FAX:
FAX:
716.826.4412
518.438.5343
585.235.0229
CCISCO: 843.238.1338
FAX:
843.238.8337
Hand Tools
Greenlee®
Ram and Hand Pump Hydraulic Driver Kits
(inch and Metric)
Ram and Hand Pump Hydraulic Driver
Punch Kit
• Fast, easy and simple to operate.
• Compact design for field use on
construction sites & maintenance jobs.
• Punches 10 times faster than wrench
method.
• Will also drive 751 Cable Cutter head.
• Can be used with all standard round,
Slug-Buster® & Slug-Splitter® punch sizes.
• 3-foot hose.
• Powerful 11-ton hydraulic ram.
All Kits Feature:
• Slug Splitter® Knockout Punches with
capacities up thru 10 gauge stainless steel.
Refer to individual punch capacity ratings.
7506 Kit Features:
• Fast easy and simple to operate.
• Compact design makes this a perfect
choice for use on construction sites and
maintenance jobs.
• 3-foot hose.
7646
Cat. No.
7646
UPC No. Description
Wt. (lbs)
15906
Driver, hand pump, draw studs, adapter, spacers, Kwik
20
®
Stepper Step Bit & plastic case
73065B
34360
Driver, hand pump, Slug Buster® punches, dies & draw studs
24
for 1/2" thru 2" conduit, adapter, spacers, Kwik Stepper®
Step Bit & plastic case
731OSB
34361
Driver, hand pump, Slug Buster® punches, dies & draw studs
54
for 1/2" thru 2" and 2-1/2" thru 4" standard conduit size punches,
®
punches dies & draw studs, adapter, spacers, Kwik Stepper
Step Bit & steel case
7646PgSB 32799
Metric - Driver, Slug Buster® Pg punches, dies & draw studs
24
for 15.2 mm thru 60.0 mm, adapter, spacers, Kwik Stepper®
Step Bit & plastic case
38520
38520
Driver, hand pump, Slug Buster® punches & draw studs for
48
1/2" thru 3" and 4" conduit, adapter, spacers, Kwik Stepper®
Step Bit & steel case
Knockout Punches
DIE
Cat./
UPC
No.
31126
31128
31129
28155
28157
36489
28159
31135
28161
31131
28163
31132
31133
28166
Hole Size
Conduit
& Pipe
(in)
–
–
–
1/2
3/4
–
1
–
1-1/4
–
1-1/2
–
–
2
Actual
(in)
(in)
–
.598
–
.732
–
.803
7/8
.885
–
1.115
1-7/32
1.210
1-11/32
1.362
–
1.457
1-11/16
1.701
–
1.850
1-15/16
1.951
–
2.125
–
2.362
2-3/8
2.416
UPC No.
29619
7307
29528
7506
30385
Description
1/2" through 1-1/4" Conduit Size Slug Splitter®
Knockout Punch Kit
1/2" through 2" Conduit Size Slug Spliter®
Knockout Punch Kit
1/2" through 2" Conduit Size Slug Splitter®
Knockout Punch Kit with Hydraulic Ram & Hand Pump
Wt. (lbs)
5
10.4
32
Specifications:
744/29619 - Quick DrawTM and Quick Draw 90TM hydraulic drivers, Battery Powered drivers,
7646 and 7625 ram-type drivers.
7307/29528 - Quick DrawTM and Quick Draw 90TM hydraulic drivers, Battery Powered drivers,
7646 and 7625 ram-type drivers.
7506/30385 - Hydraulic ram and hand pump included.
Ram and Hand Pump Hydraulic Driver Kits
(Inch and Metric)
• Slug Splitter® heavy-duty punches are designed
to punch up thru 10 gauge stainless steel.
• Unique slug splitting design and tool steel
construction easily punch 10 gauge mild
steel & stainless steel.
• Heavy-duty dies & stainless steel draw studs
for longer life.
• Excellent abrasion resistance for punching
fiberglass & plastic.
• U. S. Patent No. 4,543,722
PUNCH
Cat./
UPC
No
31117
31119
31120
28154
28156
36490
28158
31122
28160
31123
28162
31124
31125
28165
Cat No.
744
7506
DRAW STUDS
Cap.
Stainless
Hydraulic
Ratchet
Steel
Drivers
Drivers*
GA.
7804/7904 7646/7625 1904
12
29451
29451
30227
12
29451
29451
30227
12
29451
29451
30227
10
29451
29451
30227
10
31872
29452
12098
10
31872
29452
12098
10
31872
29452
12098
10
31872
29452
12098
10
31872
29452
12098
10
–
29452
12098
10
–
29452
12098
10
–
29452
12098
10
–
29452
12098
10
–
29452
12098
* 16 ga. stainless steel capacity with ratchet driver
Note: Slug Splitter® Punch Units are also available & consist of: punch, die and draw stud.
Check individual punch for specific capacity. Call for more details.
• Fast, easy and simple to operate.
• Compact design for field use on
construction sites & maintenance jobs.
• Punches 10 times faster than wrench
method.
• Can be used with all standard round,
Slug-Buster, and Slug-Splitter® punches.
• 3-foot hose.
Wt. (lbs)
7646
15906
Driver with hand pump, plastic case
20
7306
15909
Driver, hand pump, standard punches, dies an draw studs
24
for 1/2" through 2" conduit, plastic case
7310
15910
Driver, hand pump, standard punches, dies and draw studs
54
for 1/2" through 4" conduit steel case and 2-1/2" thru 4"
standard conduit size punches, dies and draw studs, steel case
7646Pg 27433
Metric - Driver, hand pump, standard Pg punches, dies and
24
draw studs for 15.2 mm through 60.0 mm, plastic case
7304
02815
Standard punch and die kit (no draw studs) for
21
2-1/2" thru 4" conduit, plastic case
38456
38456
Driver, hand pump, standard punches, dies and
48.4
draw studs for 1/2" through 3" and 4" conduit, steel case
Ratchet Punch Driver and
Standard Knock Out
Punch Kits
1806
• Time saving ball bearing head punches
faster than wrench method.
• Punches up through 10 gauge mild steel.
• Ratchet action allows for work in confined
areas.
• Plastic carrying case.
Hand Tools
19
19 -40
Cat. No.
1804
UPC No.
02810
1806
07179
17828
17828
WWW.HANESSUPPLY.COM
Description
Basic Ratchet Driver with two Draw Studs,
Kwik Stepper® Step Bit and case
Inch-Ratchet Driver with 1/2" thru 2" standard
punches, dies and draw studs and case
3/8" x 3-1/2" Draw Stud for use with 16 gauge
capacity round standard punches, actual size 15/16"
thru 1-1/2", 18.6 mm, 20.4 mm and 22.5 mm).
Wt. (lbs)
9
14
Albany/NE Division:
518.438.0139
Rochester Division:
585.235.0160
FAX:
FAX:
FAX:
716.826.4412
518.438.5343 CCISCO: 843.238.1338
585.235.0229
FAX: 843.238.8337
Hand Tools
Greenlee
Nail Eater II® Impact Bits
Metal Stud Punches
• Punch up through 20 gauge (0.9 mm) steel studs in one stroke.
• Aluminum head provides strength with minimum weight, reducing operator fatigue.
• Contoured handle design gives better operator leverage and makes it
possible to punch in tight places.
• Self stripping design eliminates punch hang-ups.
• Automatically centers holes on standard studs.
• Conversion kit available to upgrade early models from
24 gauge to 20 gauge maximum capacity.
Specifications:
Capacity: 709 - 1-5/8" & wider studs.
20 gauge steel studs.
710 - 2-1/2" and wider studs.
20 gauge steel studs.
Cat. No.
709
710
30968
UPC No.
22280
21285
30968
121 AV
22286
24823
21297
04006
22286
24823
21297
®
Desription
Wt. (lbs)
7/8" Diameter Stud Punch
7
1-11/32" Diameter Stud Punch
7.5
Conversion Kit - Upgrades early model 709 or 710
from 24 to 20 gauge maximum capacity
Punch for 709 - Accessory
Die for 709 - Accessory
Punch for 710 - Accessory
Die for 710 - Accessoy
Nail Eater II® Power Bits
• Patented new design for improved cutting and cleaner holes.
• Self-feeding screw point draws bit through wood.
• Unique patented design cutting angle - smoother starts, reduced cutting loads.
• Made of super tough heat treated steel; cuts through nails and provides
longer life.
• “Shorty” bits - for working in tight places, yet still can go through three
abutting 2 x 4s.
• See “Bit Extensions” if more length is required.
• POP packaged.
• Quickly bore through creosoted and salt treated utility poles.
•
•
•
•
Resists wear, eats through nails and staples.
Self-feeding screw point draws the bit through the wood.
Choice of 7/16" or 5/8" hex shank to fit impact drivers.
Available in 18" and 24" overall lengths.
Cat.
No.
37868
37869
37870
37871
37872
37873
37874
37875
37876
37877
37878
37879
37880
37881
37882
37883
37884
37885
37886
37887
UPC
No.
9/16
11/16
13/16
15/16
1-1/16
9/16
11/16
13/16
15/16
1-1/16
9/16
11/16
13/16
15/16
1-1/16
9/16
11/16
13/16
15/16
1-1/16
Hole
(in)
18
18
18
18
18
24
24
24
24
24
18
18
18
18
18
24
24
24
24
24
Overall Length: 7-5/8"
Twist Length: 5"
Electric drill required: 61 PTS - 5/8" thru 61 PTS 1", minimum 3/8" drill; All Big Shank, 1/2" drill.
66PT Nail Eater II®:
Overall Length: 18"
Twist Length: 15"
61PTS Shorty, 62PTS & 61/62 PTS Big Shank
Shorty Nail Eater II® Bits
Cat.
No.
61PTS-5/8
61PTS-11/16
61PTS-3/4
61PTS-13/16
61PTS-7/8
61PTS-1
62PTS-5/8
62PTS-11/16
62PTS-3/4
62PTS-13/16
62PTS-7/8
62PTS-1
61/62PTS-1-1/8
61/62PTS-1-1/4
UPC
No.
30419
30421
30423
30425
30427
30429
31788
31790
31792
31794
31796
31798
30431
30433
Hole Hex Shank
(in)
(in)
5/8
5/16
11/16
5/16
3/4
5/16
13/16
5/16
7/8
5/16
1
5/16
5/8
7/16
11/16
7/16
3/4
7/16
13/16
7/16
7/8
7/16
1
7/16
1-1/8
7/16
1-1/4
7/16
Wt.
(lbs)
.3
.4
.4
.5
.5
.8
.3
.4
.5
.5
.6
.7
.9
1.1
66PT Nail Eater II® Bits
• Double-end replaceable screw point. Choose the right feed for the
material you are drilling. Fine thread for hardwoods, coarse thread
for fast effortless drilling even in soft gummy woods.
• Tapered backside for easier removal.
• Open design won't clog with wood chips.
• Three milled flats for use in portable electric or pneumatic drills and
stationary boring machines.
UPC
No.
30915
30919
30921
30923
30925
30927
30929
30931
30935
30937
Hole Hex Shank
(in)
(in)
1/2
5/16
5/8
7/16
11/16
7/16
3/4
7/16
13/16
7/16
7/8
7/16
15/16
7/16
1
7/16
1-1/8
7/16
1-1/4
7/16
Wt.
(lbs)
.7
.8
1
1.2
1.2
1.5
1.6
1.8
2.3
2.8
Cat No.
UPC No.
149G-1
34985
149G-1-1/8
29388
149G-1-1/4
29389
149G-1-3/8
29390
149G-1-1/2
29391
149G-1-3/4
29392
149G-2
34986
149G-2-1/8
29393
149G-2-1/4
29395
149G-2-9/16 29396
149G-3
34987
149G-3-5/8
29398
149G-4-5/8
29400
Hole
Dia.
(in)
1
1-1/8
1-1/4
1-3/8
1-1/2
1-3/4
2
2-1/8
2-1/4
2-9/16
3
3-5/8
4-5/8
Overall
Length
(in)
5
5
5
5
5
5
5
5
5
5
5
6-1/4
6-1/4
Pipe &
Conduit
Size (in)
1/2
1/2 & 3/4
3/4
–
1
1-1/4
–
1-1/2
–
2
2-1/2
3
4
Wt.
(lbs)
.4
.3
.3
.4
.4
.5
.6
.7
.7
.8
1.1
2.1
2.6
Replacement Parts:
Cat. No.
4236AV
UPC No.
05133
18358
18405
18358
18405
Description
Replacement Screw Point for 149G-1, 149G-1-1/8, 149G-1-1/4,
149G-1-3/8, 149G-1-1/2, 149G-1-3/4, 149G-2, 149G-2-1/8,
149G-2-1/4, 149G-2-9/16 and 149G-3
Replacement Screw Point for 149G-3-5/8 & 4-5/8
Replacement Shank for 149G-3-5/8 & 4-5/8
Conduit and Pipe Bit Sets
• Complete assortment of the most commonly used Greenlee bits.
• High impact rugged plastic carrying case.
• Full compliment of accessories conveniently stored.
Cat. No.
144OG
1441
UPC No.
29407
34995
1440G/
29407
Plumber's
Bit Kit
Description
Wt. (lbs)
Plumber's Bit Kit
6.5
Contractor's Bit Kit
6
1441/34995
Contractor's Bit Kit
– continues –
WWW.HANESSUPPLY.COM
19 -41
19
Hand Tools
Cat.
No.
66PT-1/2
66PT-5/8
66PT-11/16
66PT-3/4
66PT-13/16
66PT-7/8
66PT-15/16
66PT-1
66PT-1-1/8
66PT-1-1/4
Wt.
(lbs)
0.9
1.1
1.4
1.5
1.7
1.2
1.5
1.8
2.1
2.2
1.0
1.2
1.5
1.6
1.8
1.2
1.6
1.9
2.1
2.2
149G E-Z BoreTM Bits
Specifications:
61 PTS Shorty Nail Eater II® and 62 PTS and
61/62 Big Shank Shorty Nail Eater Il® Bits:
Hex Shank
(in)
7/16
7/16
7/16
7/16
7/16
7/16
7/16
7/16
7/16
7/16
5/8
5/8
5/8
5/8
5/8
5/8
5/8
5/8
5/8
5/8
Albany/NE Division:
518.438.0139
Rochester Division:
585.235.0160
FAX:
FAX:
FAX:
716.826.4412
518.438.5343
585.235.0229
CCISCO: 843.238.1338
FAX:
843.238.8337
Hand Tools
Greenlee®
Conduit and Pipe Bit Sets (continued)
Cat.
No.
45-7/8
45-1-1/8
45-1-1/4
149G-1
149G-1-1/8
149G-1-1/4
149G-1-1/2
149G-1-3/4
149G-2-1/8
149G-2-9/16
423AV
51376
3174GB
52144
1440C
1440E
904-5-1/2
34997
UPC
No.
34037
06614
00267
34985
29388
29389
29391
29392
29393
29396
05133
51376
50668
52144
02775
06864
34996
34997
D'versBIT® System (continued)
Kit. Cat./UPC No.
1440G 1441
Description
29407 34995
7/8" Unispur Bit
x
1-1/8" Unispur Bit
x
1-1/4" Unispur Bit
x
1" E-Z BoreTM Kit
x
TM
1-1/8" E-Z Bore Bit
x
1-1/4" E-Z BoreTM Bit
x
x
x
x
x
x
x
x
x
Double End Screw Point x
x
1/8" Allen Wrench
x
x
3/16" Allen Wrench
x
5/32" Allen Wrench
x
Coupling Adapter
x
Drill Adapter
x
5-1/2" Bit Extension
x
Plastic Case
x
x
Type M, Masonry
• For drilling in masonry walls and through plaster.
• Recommended for use with Abrasion Shield to
reduce friction and abrasion as the shaft turns against masonry.
Type HS, High Speed Steel
• Designed for aggressive cutting in all types of wood.
• Retrieve wire or cable by removing the drill motor, attaching D'versiGRIP
and wire to chuck end of shaft and pulling from drill end of shaft.
Bit Dia.
(in)
Shaft
Color Lgth
Code
(in)
18
1/4"
24
Blue
36
54
72
18
3/8"
24
Black
36
54
72
18
1/2"
24
Green
36
54
72
3/8"
36
Black
54
72
1/2"
36
Green
54
72
3/4"
54
Red
72
D'versBIT® System:
A new twist to an old problem. These flexible steel drill bits are the right tools
for installing wire or cable inside existing walls.
It bends to meet your needs! Fishing wire or cable through existing walls used
to be frustrating and time-consuming, but the D'versiBIT® has made it as simple
as bowing the spring steel shaft in the direction you want to drill and turning on
the power. Proven in the field to deliver accurate and professional results in
many applications. Bits range from 1/4" to 1" in diameter and in shaft length
from 18" to 72".
The D'versiBit® System makes it possible to easily accomplish even complex
installations. This patented system attaches a quality drill bit to a long flexible
spring steel shaft. When used with the Placement Tool, this flexibility makes it
possible to easily manipulate the bit within walls. After drilling, attach a
D'versiGRIP to the hole in the drill and pull wire or cable back through the wall.
Shaft
Dia.
(in)
3/16
3/16
3/16
3/16
3/16
3/16
3/16
3/16
3/16
3/16
3/16
3/16
3/16
3/16
3/16
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1/4
Type M
Masonry
Type HS
High Speed Steel
Cat. No. UPC No. Cat. No.
–
–
1418D
04-03-24M 38661
1424D
04-03-36M 38662
1436D
04-03-54M 38663
1458D
–
–
1472D
06-03-18M 38665
3818D
06-03-24M 38666
3824D
06-03-36M 38667
3836D
06-03-54M 38668
3858D
06-03-72M 38669
3872D
–
–
1218D
–
–
1224D
–
–
1236D
–
–
1258D
–
–
1272D
06-04-36M 38672 3836D14
06-04-54M 38673 3858D14
06-04-72M 38674 3872D14
08-04-36M 38677 1236D14
08-04-54M 38678 1258D14
08-04-72M 38679 1272D14
12-04-54M 38683
–
12-04-72M 38684
–
UPC No.
38744
38745
38746
38747
38748
38749
38750
38751
38752
38753
38754
38755
38756
38757
38758
38761
38762
38763
38766
38767
38768
–
–
Type A, Auger
• Wood-type auger bit with screw point
• Pulls itself through wood, avoids walking or skidding.
• Excellent for drilling in soft woods or through thin sections.
Placement Tool
Type B, Combination w/Screw Point:
• A popular bit that can be used in many applications.
• Screw point for easy starting and pulling through wood.
• With screw point removed, this bit can be ground to function like a
standard combination bit.
• Allows placement of the drill bit at any point within the wall.
• Helpful in judging where the bit will be during drilling to avoid
accidentally drilling through the wall.
• Useful for vertical and horizontal placements.
Cat. No
712P
Functions: Use to position all bit & shaft sizes.
• For drilling in wood and light sheet metal.
• Drilling speed relative to pressure applied.
• Chips can be brought easily out of the hole.
• This bit is excellent for tough woods and thick obstacles.
Hand Tools
19
19 -42
Shaft
Dia.
(in)
5/32
5/32
5/35
5/32
5/32
3/16
3/16
3/16
3/16
3/16
3/16
3/16
3/16
3/16
3/16
3/16
3/16
3/16
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1/4
Type A
Auger
Cat. No. UPC No.
–
–
–
–
–
–
–
–
–
–
06-03-18A 38065
06-03-24A 38066
06-03-36A 38067
06-03-54A 38068
06-03-72A 38069
08-03-18A 38070
08-03-36A 38072
08-03-54A 38073
08-03-72A 38074
09-03-24A 38076
09-03-36A 38077
09-03-54A 38078
09-03-72A 38079
12-04-18A 38080
12-04-24A 38081
12-04-36A 38082
12-04-54A 38083
12-04-72A 38084
16-04-36A 38087
16-04-54A 38088
16-04-72A 38089
– continues –
Description
D'versBIT® Placement Tool
Specifications:
Type C, Combination:
Bit Dia.
(in)
Shaft
Color Lgth
Code
(in)
18
1/4"
24
Blue
36
54
72
18
3/8"
24
Black
36
54
72
18
1/2"
36
Green
54
72
24
9/16"
36
Orange 54
72
18
3/4"
24
Red
36
54
72
1"
36
White
54
72
UPC No.
38350
Type B
Combo. w/Screw Point
Cat. No.
–
–
–
–
–
–
06-03-24B
06-03-36B
06-03-54B
06-03-72B
–
08-03-36B
08-03-54B
08-03-72B
–
09-03-36B
09-03-54B
09-03-72B
–
–
–
–
–
–
–
–
UPC No.
–
–
–
–
–
–
38091
38092
38093
38094
–
38097
38098
38099
–
38102
38103
38104
–
–
–
–
–
–
–
–
Recessed Light Hole Saws
Type C
Combo.
Cat. No. UPC No.
04-03-18C 38110
04-03-24C 38111
04-03-36C 38112
04-03-54C 38113
04-03-72C 38114
06-03-18C 38115
06-03-24C 38116
06-03-36C 38117
06-03-54C 38118
06-03-72C 38119
–
–
08-03-36C 38122
08-03-54C 38123
08-03-72C 38124
–
–
09-03-36C 38127
09-03-54C 38128
09-03-72C 38129
–
–
–
–
12-04-36C 38132
12-04-54C 38133
12-04-72C 38134
–
–
16-04-54C 38138
16-04-72C 38139
•
•
•
•
•
Industry's only interchangeable replacement blades.
Strong durable back plate.
Available in two styles - steel tooth and carbide grit.
Made and designed in U.S.A. by Greenlee.
Use with a power drill to cut large diameter holes for recessed lighting
fixtures.
• Saws use Greenlee arbor 37156, purchased separately.
Specifications
Capacity:
Steel Toothed Blade - up to 7/8" plywood, wood,
acoustical tile and ceiling tile.
Carbide Grit Blade - up to 7/8" drywall, plywood,
wood, acoustical tile, ceiling tile, piaster and stucco.
Cat/ UPC
No.
35712
35716
35713
35717
35714
35718
35715
35719
Hole
Wt.
Description Dia. (in) (lbs)
Steel Toothed
4-3/8
.76
Carbide Grit
4-3/8
.74
Steel Toothed
6-3/8
1.2
Carbide Grit
6-3/8
1.1
Steel Toothed
6-5/8
1.3
Carbide Grit
6-5/8
1.3
Steel Toothed
6-7/8
1.3
Carbide Grit
6-7/8
1.4
WWW.HANESSUPPLY.COM
Use For
Mini Juno, Capri
Marco & Halo
Halo & Capri
Halo & Capri
Juno & Progress
Juno & Progress
Lithonia, Marco,
Lightioler, Progress,
Capri & Precolite
Albany/NE Division:
518.438.0139
Rochester Division:
585.235.0160
FAX:
FAX:
FAX:
716.826.4412
518.438.5343 CCISCO: 843.238.1338
585.235.0229
FAX: 843.238.8337
Hand Tools
Greenlee
Flex-O-TwistTM Flexible Steel Fish Tapes
Screw Anchor Expanders
for Caulking Anchors
• Quickly & securely set expansive screw
anchors in masonry, regardless of thickness
• Hardened alloy steel.
• Patented
Cat.
No.
866
868
870
UPC
No.
02667
02669
02671
Cat. No.
4451AV
4457AV
4717AV
Expansive
Belt Size
#10-24
1/4" - 20
3/8" - 16
UPC No.
05191
05197
05300
Use With
Qty.
Anchor No. Per Box
84296
1
84299
1
84305
1
Wt.
(lb)
.3
.4
.6
1. Drill hole of required
size & put anchored screw
on expander. Insert screw
anchor into drilled hole.
2. Strike head of expander w/
hammer or mallet until anchor
is held securely in wall.
Unscrew expander.
Description
Anchor Screw for 866
FISHING, CABLE PULLING
Steel Fish Tapes
• High-impact nylon, one-piece handle for maximum durability, long life,
and easy, comfortable use.
• Large handle grip for greater user control.
• Self, tensioning case for easy tape winding. (No tension trigger.)
• Wide, impact resistant rewinder case with viewports
to ensure tape fit and retaining strap on inside to
hold tape secure.
• Dirt-free tape finish keeps hands cleaner during use.
Specifications:
UPC No.
29045
28256
29046
29047
28257
29048
30394
30395
30396
29367
30859
39790
39791
Description
50' x 1/8" x .060" Steel Fish Tape in Winder Case
50' x 1/8" x .060" Steel Fish Tape w/o Winder Case
Swivel Ball Head for use on 1/8" steel fish tapes
Flexible Leader
One Piece Handle and Retaining Strap
12" Diameter Replacement Case
Nylon Fish Tapes
• High-impact nylon, one-piece handle for maximum
durability, long life, and easy comfortable use.
• Co-extruded curl resistant nylon fish tape that fishes
equally well in large and small conduit.
• Heavy-duty winder case.
UPC No.
27396
27397
36850
36849
39790
39791
Specifications:
Capacity: 3/16" tape width - 500 lbs. maximum design strength.
Weight: 539-25-3 lbs.
439-25-3 lbs.
539-50-6 lbs.
439-50-4 lbs.
539-100-10 lbs. 439-100-6 lbs.
Cat. No.
539-25
539-50
539-100
439-25
439-50
439-100
39790
39791
UPC No.
30161
30162
34002
29516
29517
29518
39790
39791
Description
25' x 3/16" x .060" diameter Flexible Steel Fish Tape in Winder Case
50' x 3/16" diameter Flexible Steel Fish Tape in Winder Case
100' x 3/16" diameter Flexible Steel Fish Tape in Winder Case
25' x 3/16" diameter Flexible Steel Fish Tape w/o Winder Case
12" diameter Replacement
Li'l FisherTM 390 Power Fishing System
390
38594
Li'l FisherTM Vacuum/Blower Power Fishing System Includes only unit and hose
392
39051
Power Fishing System Accessory Kit
Blow a piston through conduit using 390 Li'l FisherTM Power
Fishing System. Can be used with fish line, poly line or
measuring tape.
Blow a piston through conduit using 390 Li'l FisherTM Power
Fishing System using 691 Blow Gun with 595 Mighty Mouser® Fish Line.
Vacuum a piston through conduit using 390 FisherTM Power Fishing System. Can be used
with fish line, poly line or measuring tape.
Note: Individual & Replacement parts are available, please call for information.
Mighty Mouser® Blow Gun Kit
• This compact, self-contained Lexan®
thermoplastic blow gun holds a
2,150' package of 85 lb. breaking
strength fish line.
• Compact self-contained unit leaves
one hand free for more efficient
operation.
• Mighty Mouser® Blow Gun and
Accessories all fit into compact sturdy metal case.
Specifications:
Capacity: 1/2" - 4" conduit through 6" with additional
optional accessories
Power Source: Use with blower power fishing systems
691 - 1.7 lbs.
Description
50' x 3/16" diameter Nylon Fish Tape in Winder Case
100' x 3/16" diameter Nylon Fish Tape in Winder Case
50' x 3/16" diameter Nylon Fish Tape Winder Case
100' x 3/16" diameter Nylon Fish Tape w/o Winder Case
12" diameter Replacement Case
Cat. No.
592
691
595
618
619
UPC No.
32565
32095
32433
16517
16951
WWW.HANESSUPPLY.COM
Description
Mighty Mouser® Blow Gun Kit for 1/2" - 4" Conduit in metal box
Mighty Mouser® Blow Gun only
Fish Line - 85 lbs. pulling strength; 2,150' long.
Piston for 5" Conduit - IMC, Rigid
Piston for 6" Conduit - EMT
19 -43
19
Hand Tools
Cat. No.
436-5
436-10
R436-5
R436-10
39790
39791
• High-impact nylon, one-piece handle for maximum durability, long life
and easy, comfortable use.
• Made of wound multi-strand 3/16" diameter steel
cable for strength and flexibility.
• Flexible... slips through lateral and vertical bends
in the same rum.
• Heavy-duty winder case.
Capacity: 1/2" - 2" conduit with optional Accessory Kit
(2-1/2" - 4" with optional foam pistons)
Liquid Capacity - 1.75 gal. (6.5 L) Use 690 Power Fishing
System for greater liquid capacity requirements.
Capacity: 1/8" an 1/4" tape width 400 lbs. max. design strength.
Weight:
438-10-5 lbs. R438-10-3 lbs. R538-10-6 lbs.
438-20-7 lbs. R438-20-6 lbs. R538-20-11 lbs.
R438-5-2 lbs. 538-10-8 lbs.
Cat. No.
438-5
438-10
438-20
R438-5
R438-10
R438-20
538-10
R538-10
R538-20
R438B
439-1
®
Albany/NE Division:
518.438.0139
Rochester Division:
585.235.0160
FAX:
FAX:
FAX:
716.826.4412
518.438.5343
585.235.0229
CCISCO: 843.238.1338
FAX:
843.238.8337
Hand Tools
Greenlee®
Portable Blower
Power Fishing System
Poly Line
• Use with power fishing Systems directly from the
container.
• Resists tangling when dispensing.
• Rot and mildew resistant.
• Handy reusable plastic dispenser pail with handle
keeps the line dry.
• Not for pulling wire or cable. Use to pull rope
through conduit.
• Powerful, will blow line or measuring tape
in up to 4" conduit.
• Portable, lightweight blower has shoulder
strap to make it easy to carry and allow the
operator to have both hands free.
• Efficient, includes the Mighty Mouser® blow
gun for fast, easy line blowing.
Capacity: 1/2"-4" conduit
591
32432
Portable Blower Power Fishing System
618
16517
Accessory - Piston for 5" Conduit - IMC, Rigid Weight: 34 lbs.
619
16951
Accessory - Piston for 6" Conduit - EMT
Note: Replacement parts are available, please call for information.
Vacuum/Blower
Power Fishing System
UPC No.
31339
31340
16646
18877
18879
16517
16951
Description
Vacuum / Blower Power Fishing System - 120 VAC
Vacuum / Blower Power Fishing System - 220 VAC
Accessory - Adapter for 1-1/2" - 6" conduit
Accessory - Vacuum Crevice Tool
Accessory - Vacuum Dust Brush
Accessory - Piston for 5" Conduit - IMC, Rigid
Accessory - Piston for 6" Conduit - EMT
Cat. No.
620
405
409
UPC No.
16956
21546
21468
Description
Pay-Out Reel w/Rope (consists o 405 & 409)
Reel Stand
Polypro Rope 3/16" x 600'
Specifications:
Size: 3/16" x 600'
Capacity: 720 lbs. average breaking strength
Weight: 620: 10 lbs., 405: 5.2 lbs., 409: 5 lbs.
620
Note: Individual & Replacement parts are available, please call for information.
Conduit Measuring Tape and Dispenser
Conduit Pistons
• Fish and measure conduit runs in one operation.
• Permanently printed measurements every foot
from zero to 3000'.
• Made of strong, waterproof polyester.
• Pay-out dispenser has anti-skid pads, handle
and built-in cutter.
Individual Pistons:
Cat.
No.
608
609
610
611
612
613
614
621
615
622
616
646
617
623
618
619
Hand Tools
Size: 430 - 6500', 431 - 5200", 37959 - 2200'
Capacity:
430 - 210 lbs. average breaking strength
Weight: 430 - 11 lbs., 431 - 12 lbs.
• Use to hand pull wire or cable.
• Light enough to be vacuumed or blown into the conduit run with a power
fishing system.
• Rot and mildew resistant.
• Can be pulled into the run along with cable or wire
and left for future additions to the run.
• Use with blower or vacuum power fishing system to pioneer the line
through the conduit run.
• Flexible foam body for an air-tight seal.
• Color coded end disk with embossed size markings for fast, easy selection.
• Strong steel center rod with loops on both ends.
• Pistons available for all types and sizes of conduit 1/2" through 6".
• Patented.
19
Description
Poly Line 6500'
Poly Line 5200'
Poly Line 2200'
Poly Line Refill 6500'
Rope and Pay-Out Reel
• Rugged, self-contained unit includes everything you
need to blow or vacuum fish line, poly line or measuring tape.
• Durable tank and accessory storage box are corrosion, chemical and impact resistant polyethylene.
• Designed for the job site, 10' long hose, large
heavy- duty wheels and removable accessory box.
• Large 11 gallon tank makes the 690 excellent
for cleaning water and debris.
Cat. No.
690
690-22
16646
18877
18879
618
619
Specifications:
Cat. No. UPC No.
430
21481
431
21482
37959
R430
37835
UPC
No.
16640
16507
16508
16509
16510
16511
16512
19107
16513
19109
16514
24326
16515
19110
16517
16951
Conduit
Size (in)
1/2
3/4
1
1-1/4
1-1/2
2
2-1/2"
2-1/2
3
3
3-1/2
3-1/2
4
4
5
6
Conduit
Type
All
All
All
All
All
All
IMC, Rigid
EMT
IMC, Rigid
EMT
IMC, Rigid
EMT
IMC, Rigid
EMT
All
All
Color
Green
Green
Green
Green
Green
Green
Green
Yellow
Green
Yellow
Green
Yellow
Green
Yellow
Green
Green
Specifications:
Size:
3000'
Capacity: 130 lbs. average breaking strength
Weight: 435: 18.4 lbs., 434: 3.5 lbs.
Note: Piston Sets are also avaialble,
please call for more information.
Fish Line
• Strong, lightweight nylon.
• 595 - Center feed for fast payout without tangling. Use with Mighty
Mouser® blow gun.
• 604, 605, 606 and 607 – Specially wound to payout fast from outside
without tangles.
• Mildew resistant can be pulled into the run with
the wire to provide a means to add wires later.
Cat.
No.
595
604
605
606
607
UPC
NO.
32433
23368
16504
16505
16506
19 -44
Strength Length
(Ibs)
(ft)
85
2150
85
2200
45
2750
72
1700
90
1350
435
21562
Conduit Measuring Tape 3/16" x 3000'
434
21875
Pay-Out Dispenser for 435 Conduit
Measuring Tape
435 Measuring Tape shown on
434 Dispenser - sold separately.
Kevlar® High Strength
Conduit Measuring Tape
• Pull small cables or install pull rope for large cable pulling jobs.
• Made of Kevlar®, will not rot or deteriorate. Can be left in ducts
indefinitely for future use.
• Low stretch properties make measurements accurate.
• Permanently printed measurements every foot from zero to 3000'.
• Use 406 Dispenser.
Cat. No.
39243
39244
39245
UPC No.
39243
39244
39245
Description
Specifications:
Size: 3000'
Capacity:
39243 - 1250 lbs. average breaking Strength
Weight: 39243: 10.5 lbs., 39244: 14.5 lbs., 39245: 18 lbs.
WWW.HANESSUPPLY.COM
Kevlar is a registared trademark
of E.I. DuDonp, Inc.
Albany/NE Division:
518.438.0139
Rochester Division:
585.235.0160
FAX:
FAX:
FAX:
716.826.4412
518.438.5343 CCISCO: 843.238.1338
585.235.0229
FAX: 843.238.8337
Hand Tools
Greenlee
Cable Pulling Rope Safety Tips
WARNING: Rope is a very critical link in the cable pulling system. The following steps should be observed in the selection and use of cable pulling
rope.
1. Select a rope with an average breaking strength at least four times the
rated capacity of your puller (rope safety factor). A safety factor of 4:1 minimum or greater than 4:1 is REQUIRED for pulling inside of raceways with
a minimum of rope length exposed. Higher safety factors are recommended if the pulling rope is exposed.
Required safety factors are for new rope in good condition without kinks or
splices. When pulling, avoid sharp corners, edges, wedging or dragging
over rough ground. Dirt and grit picked up by the rope can work into the
strands reducing its pulling capacity. If there is any question, discard the
used rope.
2. Use only low stretch Double Braided Polyester for high force cable
pulling. High stretch ropes store energy much like a stretched rubber
band. If, for any reason, there is a failure of the rope, pulling grip conductors, or any other component in the pulling system, this "stored-up" energy
will suddenly be unleashed. The whipping action of a rope can cause considerable damage, serious injury or death.
3. Inspect rope thoroughly before using. Make sure there are no cuts or
frays in the rope. Remember the rope is only as strong as its weakest
point. INSPECT THOROUGHLY BEFORE USING!
4. When designing the pull, keep rope confined in conduit wherever possible. Should the rope break or any other part of the pulling system fail,
releasing the stored energy in the rope, the confinement in the conduit will
work against the whipping
action of the rope by playing out much of this energy
CUT ROPE
WORN, FRAYED ROPE
within the conduit.
5. Do not stand in direct
Rope Average Breaking Strength
line with the pulling rope.
ROPE
SAFETY =
FACTOR
Maximum Pull Force Developed
By Your Cable Puller
Double Braided Composite Rope for High
Force Cable Pullers
• Custom made to Greenlee specifications
•
•
•
•
•
to provide 4:1 Safety Factor required for cable pulling.
Double braided inner core with an extra double braided outer jacket for
added strength and less stretch; white with green tracer.
Rot and mildew resistant
Factory spliced eyes at both ends.
Lowest stretch.
Select a rope with a maximum rated capacity that meets or exceeds the
cable puller's maximum pulling force.
Rope Rope
Cat./
Max.
Average
Dia. Lgth.
UPC
Rated
Breaking
(in)
(ft)
No. Cap. (lbs) Strength (lbs)
For the 640 Puller
9/16
300
35283
4,000
16,000
9/16
600
35284
4,000
16,000
9/16 1,200 35285
4,000
16,000
For the 6001 Puller
3/4
300
35098
6,500
26,000
3/4
600
35100
6,500
26,000
3/4
1,200 35101
6,500
26,000
For the 6800 Puller
7/8
300
34136
8,000
32,000
7/8
600
34137
8,000
32,000
7/8
1,200 34138
8,000
32,000
Wt. Rope
(lbs) Stand
28
63
130
644
644
†
58
113
230
644
654
†
90
178
359
654
654
†
®
Multiplex Cable Pulling Rope for Low Force
Cable Pullers
• Strong white polyester braided rope with green tracer.
•
•
•
•
•
Rot and mildew resistant.
Packed on sturdy reel.
Factory spliced eyes at both ends.
Low stretch.
Select a rope with a maximum rated capacity that meets or exceed the
cable puller's maximum pulling force.
Rope Rope
Cat./
Max. Ave. Breaking
Dia. Lgth.
UPC
Rated
Strength Wt. Rope
(in)
(ft)
No.
Cap. (lbs)
(lbs)
(lbs) Stand
For the 805 Puller
3/8
100
34121
800
3700
5.6
405
3/8
300
34122
800
3700
14.3 406
3/8
600
34123
800
3700
31.0 644
3/8
1,200
34124
800
3700
60.0 644
For the 446 Puller
1/2
300
480 / 31529 1,200
6400
21
406
1/2
600
481 / 31530 1,200
6400
50
644
1/2
1,200 482 / 31531 1,200
6400
104
†
For the 2001 Puller
5/8
300
483 / 31532 2,000
10,000
34
644
5/8
600
484 / 31533 2,000
10,000
75
644
5/8
1,200 485 / 31534 2,000
10,000
142
†
3/4
300 6005 / 29910 2,000
12,500
58
644
3/4
600 6015 / 30031 2,000
12,500
113 654
3/4
1,200 6025 / 30039 2,000
12,500
230
†
† This rope does not fit
on a rope stand. Use
reel jacks and a
spindle to dispense.
Rope Stands
• Use to organize and rewind rope.
• Welded steel with washer and spring clip to hold rope reel on stand.
Rope Stand
Rope Length
3/16" 1/4"
405 / 21546 Rope Stand
250' Rope
x
x
600'
x
300' Rope
600' Rope
x
1,000' Rope
x
x
3,000'
Conduit Tape
x
Measuring Tape Cat./UPC No.
300'
600'
1,200'
5,000'
x
300'
600'
Rope Diameter
3/8"
1/2"
5/8"
3/4" 7/8"
654
x
x
x
x
39243 39244 39245
x
x
x
x
x
x
405
x
x
x
Super Tugger® Cable Puller: 6500 lb. rated
• Pull up to 6,500 lbs. with less than 27 lbs. of operator effort.
• Unique floor mounting attachment for quick, reliable setup.
• Leaf type mounting chains won't twist when tightening.
• Heat treated steel serrated gripper feet for secure mounting to conduit.
• Force Gauge included to constantly monitor the pull.
• Right angle sheave allows the operator to stand out of the direct line of force.
• Audio alarm high force warning and circuit breaker shut off at maximum
force for added safety.
• Tapered capstan and patented rope guidance system for better control of
the rope when feeding onto the capstan.
• Patented.
UPC No.
29627
31466
29909
Description
Super Tugger® Cable Puller Power Unit. Includes force gauge & vise chains.
Same as 6001 except 220 VAC 50 Hz
Supper Tugger® Complete Puller Package. Includes 6001 Super Tugger®
cable puller power unit, pipe adapter sheave, flexible pipe adapter, 12" hook
type cable sheave, mobile extension boom, 2", 2-1/2", 3", 3-1/2", 4" extension bushings, 3/4" x 300' double braided polyester rope, rope reel stand,
floor mount, and steel storage box with casters.
– continues –
WWW.HANESSUPPLY.COM
19 -45
Hand Tools
Cat. No.
6001
6001-22
6000
19
Albany/NE Division:
518.438.0139
Rochester Division:
585.235.0160
FAX:
FAX:
FAX:
716.826.4412
518.438.5343
585.235.0229
CCISCO: 843.238.1338
FAX:
843.238.8337
Hand Tools
Super Tuger® Cable Puller: 6500 lb. rated (continued)
Pulling Force
Max.: 6,500 lbs.
Continuous: 4,500 lbs.
Dimensions
Length: 20-3/4"
Width: 22-1/2"
Height: 12"
Pulling Speed (Feet per Min.)
No Load: 16.5
At 2000 lbs: – 11
At 4000 lbs: – 7.5
At 6000 lbs: – 6
Power
1-1/2HP: 120 VAC
1-1/2HP: 220 VAC 50HZ
Required Rope
3/4" Double Braided Composite –
6,500 lbs. Max. Rated Cap.
Greenlee®
Mobile Extension Boom Kits for TuggerTM
and Super TuggerTM
•
•
•
•
Use in conjunction with Adapter Sheave for concealed wall panels.
Helps eliminate strain on hangers and boxes.
Wheels on mobile boom makes it easier to move to the next pull.
Extension bushing for 2" - 4"' conduit for mounting to the conduit inside
the panel.
• Select a boom kit with a maximum rated capacity that meets or exceeds
the cable puller’s maximum pulling force.
Cat. No.
682
16779
Note: Replacement Cable Puller Parts
and Cable Pulling components are available, please call for more information.
6082
682/16779
Description
Cat/UPC No.
Flexible Pipe Adapter
685/16780
Mobile T-Boom
6080/29964
2" Extension Bushing
16782
2-1/2" Extension Bushing 16783
16784
3-1/2" Extension Bushing 16785
16786
Ultra TuggerTM Cable Puller
Cable Puller: 8000 lb. rated
Nothing Pulls Like The ULTRA TuggerTM
• Pulls up to 8,000 lbs.
• Versi-BoomTM System allows you to make
versatile and fast set-ups and pull 10' or 20'
of extra cable easily.
• Uses standard 3" rigid steel conduit for boom.
• Direct gear drive.
• Lightweight.
• Portable
• Optional deluxe force gauge.
Cat. No.
6800
6800-22
6801
6802
UPC No.
00985
03196
00986
00987
29911
UPC No. Description
Extension Boom Kit for 640 Tugger® Cable Puller. Includes mobile T-boom,
flexible adapter sheave and 2" - 4" conduit extension bushings.
Extension Boom Kit for 6001 Super Tugger® Cable Puller. Includes mobile
T-boom, flexible adapter sheave and 2" - 4" conduit extension bushings.
6082/29911
Cat/UPC No.
6085/29912
6080/29964
16782
16783
16784
16785
16786
Specifications:
Max. Pulling Cap.
682 - 4,000 lbs.
6082 - 6,500 lbs.
Description
Ultra TuggerTM Cable Puller with Std. Force Gauge, and Floor Mount.
Same as 6800 except 220 VAC 50 Hz.
Ultra TuggerTM Cable Puller w/ Std. Force Gauge, & Conduit Chain Mount.
Ultra TuggerTM Cable Puller Std. Force Gauge, Pipe Adapter Sheave, Floor
Mount, Versi-BoomTM System and "T" Stand w/o the Versi-BoomTM
excludes Extensions and Elbow, Wheeled Carriage, Screw-on Couplers,
or Rope.
Weight
682 - 86 lbs.; 6082 - 86 lbs.
Hook-Type Sheaves for Easy TuggerTM
and Tugger®
•
•
•
•
Strong, welded steel frames.
Forged steel closure type hooks with 1" opening.
5" wide aluminum alloy sheaves with self lubricating bearings
Select a sheave with a maximum rated capacity that meets or exceeds
the cable puller's maximum pulling force.
Specifications:
Weight: 86 lbs. Dimensions:
Dimensions:
Length: 11.5 in., Width: 26 in., Height: 8.5 in.
Drive Motor 1-1/2 Horsepower
Power Source 6800, 01, 02, 03, 04 and 05: 12O V 2 0A
Power Source 6800-22, 02-22 and 05-22: 220 VAC 50 HZ
Pulling Force: Maximum - 8,000 lbs.,Continuous -6,500 lbs.
Pulling Speed - Feet Per Minute: No Load: 9 fpm, At 2000 lbs.: 8 fpm,
At 4000 lbs.: 7.5 fpm, At 6000 lbs.: 7 fpm, At 8000 lbs.: 6 fpm
Power Source: 120 V 20 A
Required Rope: 7/8 diameter; Double Braided Polyester Composite
8,000 Ib. Maximum Rated Capacity
Cat. No.
650
651
652
653
Hand Tools
19
Cat. No. UPC No.
685
16780
6085
29912
Specifications:
Max. Rated Cap.
685 - 4,000 lbs.
6085 - 6,500 lbs.
Description
Flexible Adapter Sheave for use with 640 Tugger® Cable Puller
Flexible Adapter Sheave for use with 6001 Super Tugger® Cable Puller
Weight
6085 - 31 lbs.
685 - 26 lbs.
Description
6" dia. Hook Sheave with 1-1/2" minimum radius.
18" dia. Hook Sheave with 7" minimum radius.
Sheave
650/15324 651/15325 652/15326 653/15327
Dia.
6"
12"
18"
24"
Desc.
Cat/UPC No. Cat/UPC No. Cat/UPC No. Cat/UPC No.
Sheave Pin
16797
16797
16797
16797
Sheave Pin Clip (2) 50302
50302
50302
50302
Sheave
15362
15358
15363
15364
Sheave Bushing (2) 16798
16798
16798
16798
Yoke Frame
16799
16801
16801
16802
Max. Rated Cap.: 4,000 lbs.
Weight: 650 - 8.8 lbs. 652 - 25 lbs.
651 - 15 lbs. 653 - 35 lbs.
Flexible Adapter Sheaves for Tugger®
and Super Tugger®
• Use to attach to the conduit in conjunction with adapter sheave
for easier setups.
• Helps eliminate strain on hangers and boxes.
• Select a sheave with a maximum rated capacity that meets or
exceeds the cable puller's maximum pulling force.
UPC No.
15324
15325
15326
15327
Hook Sheaves for any Greenlee Cable
Puller
•
•
•
•
For use with any Greenlee cable puller.
Strong, welded steel frames.
Forged steel closure type hooks with 1" opening.
All three sheaves are aluminum alloy with self lubricating
bearings.
Outside
Cat/UPC No. Dia. (in)
8012/00872
12
8018/00873
18
8024/00874
24
685/16780 6085/29912
Description
Cat./UPC No. Cat./UPC No.
Sheave Pin
15360
29803
Sheave Pin Clip
50302 (4)
50302 (2)
Sheave
15358
29616
Vise Chain Unit
30142
30142
(1) Vise Chain
27831
27831
(2) Vise Chain Handle 29630
29630
Frame Pin
17313
–
19 -46
WWW.HANESSUPPLY.COM
Inside
Radius (in)
3-7/8
7
9-7/8
Width
(in)
5
6
6-1/2
Weight
(lbs)
28
44
67
Max. Rated
Cap. (lbs)
8,000
8,000
8,000
Albany/NE Division:
518.438.0139
Rochester Division:
585.235.0160
FAX:
FAX:
FAX:
716.826.4412
518.438.5343 CCISCO: 843.238.1338
585.235.0229
FAX: 843.238.8337
Hand Tools
Greenlee
Cable CreamTM Cable Pulling Lubricant
Right Angle Twin Yoke Sheave for Easy
TuggerTM and Tugger®
•
•
•
•
•
•
Advanced formula, light yellow cream makes pulling faster and easier.
Compatible with all cable insulation types.
Dries slowly to a thin, non-conductive non-hardening residue.
Adheres well to the cable without messy dripping. Reduces waste.
Cleans up easily. Non-staining.
Won’t break down or Separate after exposure to freezing cold or
blistering heat.
• Environmentally safe/non hazardous.
•
•
•
•
9-13/16" minimum radius.
Strong welded steel yokes.
Forged steel closure type hook with 1" opening.
5" wide aluminum alloy sheave with self lubricating
bearings.
• Yokes rotate independently to fit various setups.
• Use with any cable puller whose maximum pulling
force is 4,000 lbs. or less.
Cat. No.
639
UPC No.
17265
Cat. No.
CRM-Q
CRM-1
CRM-5
CRM-55
Desc.
Right Angle Twin Yoke Sheave
with 9-13/16" min. radius.
Cable GelTM Cable Pulling Lubricant
Adjustable center sheave for 19-1/2" or 36" radius.
Forged steel closure type hook with 1-1/2" opening.
Aluminum frames for light weight.
Steel yoke is pinned for easy renewal.
21-7/8" high, 24" long, 7-3/8" wide with 5" wide sheaves.
Use with any cable puller whose maximum pulling
force is 6,500 lbs. or less.
Cat. No. UPC No.
6036
31569
• Polymer based lubricant offers lower friction and easier pulling
• Compatible with all cable insulation types.
• Cleans up quickly. Non-staining.
• Higher lubricity than competitive products.
• Will not cement itself into the pipe.
• Dries slowly.
• Can be applied by hand or pump.
• Will not breakdown or separate after exposure to heat or cold.
• Environmentally safe/non-hazardous.
Description
Triple Sheave Cable Guide
Specifications:
Max. Rated Cap:
Weight:
6,500 lbs.
28 lbs.
Radius Cable Sheaves for Easy TuggerTM,
Tugger® and Super Tugger®
• Welded steel frame with a series of sheaves to form a large radius.
• Yokes with cast steel closure type hooks
with a 1" opening.
• 5" wide aluminum alloy sheaves.
• Use with any cable puller whose maximum
pulling force is 4,000 lbs. or less.
Cat. No.
636
637
638
631
UPC No.
17255
17260
17263
21572
Tray Type Sheaves
Steel frame easily attaches to cable tray up to 2" thick.
Helps roll and guide tray pulls.
Make tray pulls easier.
5" wide aluminum alloy sheaves with self lubricating bearings.
Viscosity: 8,000 - 12,000 CPS
PH Range: 7.0 - 8.0
Wire Duct Brush
• Flat steel bristles for maximum cleaning of sand, grit and light
obstructions from duct.
• Pulling eye on one end and smaller twisted eye on the other end
for tailing line allows bi-directional use.
• Can be pulled to loosen dried material before using mandrels or
659
spreader swabs.
658
Cat./
Duct
Max.
UPC No. Size (in) Dia. (in)
39274
2
1.87
39276
2.5
2.38
39278
3
2.87
39280
3.5
3.38
39282
4
3.87
39284
5
4.87
39286
6
5.87
WWW.HANESSUPPLY.COM
Max. Rated Wt.
Cap. (lbs) (lbs)
200
.83
200
.83
200
.83
200
.90
200
.95
200
1.15
200
1.28
19 -47
19
Hand Tools
Size:
658 - 12" long. 659 - 22" long
Weight: 658 - 11 lbs. 659 - 17 lbs.
Weight: GEL-Q - 2.3 lbs.
GEL-5 - 45 lbs
GEL-1 -8.5 lbs.
GEL-55 - 498 lbs.
Cat./
Duct
Max. Disk Max. Rated Wt.
UPC No. Size (in) Size (in)
Cap. (lbs) (lbs)
16854
2
1.75
4800
.5
16856
2.5
2.25
4800
.6
16857
3
2.75
4800
1.5
16858
3.5
3.25
4800
2.0
16859
4
3.75
4800
2.5
17370
5
4.75
4800
3.5
17571
6
5.75
4800
4.0
Max. Rated Cap: 4,000 lbs.
Weight: 631 - 115 lbs. 637 - 63 lbs.
636 - 49 lbs. 638 - 85 lbs.
Specifications:
Description
Cable-GelTM One Quart Squeeze Bottle
Cable-GelTM One Gallon
Cable-GelTM 5 Gallons
Cable-GelTM 55 Gallons
• Spreads a coat of wire lubricant in duct before installation of cable.
• Cleans mud, dirt and light debris from duct before pulling.
• Tapered shape permits bi-directional use.
• Will not damage inner walls of duct.
Description
16" Radius Cable Sheave w/4 sheave wheels.
658
15332
Tray-Type Sheave
659
19094
Tray-Type Sheave
Cat. No. UPC No.
GEL-Q
35211
GEL-1
35212
GEL-5
35213
GEL-55 35214
Specifications:
Lube Spreader Swab
Specifications:
•
•
•
•
Desciption
Cable-CreamTM One Quart Squeeze Bottle
Cable-CreamTM One Gallon
Cable-CreamTM 5 Gallons
Cable-CreamTM 55 Gallons
Weight: CRM-Q - 2.3 lbs.
Viscosity: 30,000 - 45,000 CPS
CRM-5 - 42 lbs
PH Range: 7.0 - 8.0
CRM-1 - 9.5 lbs.
CRM-55 - 459 lbs.
4,000 lbs.
45 lbs.
Triple Sheave Cable Guide for Easy
TuggerTM, Tugger® and Super Tugger®
•
•
•
•
•
•
UPC No.
35207
35208
35209
35210
Specifications:
Specifications:
Max. Rated Cap:
Weight:
®
Albany/NE Division:
518.438.0139
Rochester Division:
585.235.0160
FAX:
FAX:
FAX:
716.826.4412
518.438.5343
585.235.0229
CCISCO: 843.238.1338
FAX:
843.238.8337
Hand Tools
Greenlee®
Flexible Mandrel
Rope Clevis
• Useful for cleaning out mud, dirt and light obstacles from ducts before
•
•
•
•
installation of cable.
• Can be used around fight bends due to convex contacts between disks.
• Tapered profile allows pulling in either direction. Pulling eyes on both ends.
• Polyurethane disks do not damage inner walls of duct.
Cat./
Duct
Max. Disk Max. Rated Wt.
UPC No. Size (in) Size (in)
Cap. (lbs) (lbs)
39265
2
1.88
2330
1
39263
2.5
2.19
2330
1
39261
3
2.81
2330
1.5
39259
3.5
3.25
4800
3.5
39257
4
3.75
4800
4.5
39255
5
4.69
4800
6
39288
6
5.81
4800
8.5
For use with flexible forged eye grips.
Removable bolt and rope sheave.
Removable grip eye bolt.
Select the clevis with a maximum rated clevis that meets or exceeds
the cable puller's maximum pulling force.
• For use with flexible eye grips.
• Removable sheave for rope eye.
Cat.
No.
578
579
678
UPC No.
31910
31905
19524
Desc.
Rope Clevis
Rope Clevis
Rope Clevis
Max. Rated
cap. (lbs)
6,500 lbs.
10,000 lbs.
6,500 lbs.
Wt.
(lbs)
578 - 0.9
579 - 1.3
678 - 1.3
579
Wire Caddies
Rope to Swivel Connectors
• Rope to swivel connectors connect the cable
pulling rope, up to 1" in diameter, to the pulling
swivel.
• Makes connecting the pulling rope and the pulling
swivel easier.
• Connectors feature a removable sheave for rope eye.
• Select the connector with a maximum rated capacity that
meets or exceeds the cable puller's maximum pulling force.
Max. Rated Cap. Max.
in Conduit or Rated Cap.
"F"
Cat./ Underground Overhead Dia. Length "E"
Dia. Use on
UPC No.
(lbs)
(lbs)
(in)
(in)
(in)
(in) Swivel
39905
5,000
3,000
2 4-11/16 7/16 13/32 39107
39904
7,000
4,200
2 4-11/16 1/2
1/2 39108
39903
10,000
6,000
2 4-11/16 9/16
5/8 39109
39902
10,000
6,000
2 4-11/16 11/16 11/16 39110
905, 906 Features
• All welded steel frame.
• 6 wire spool axles with spring clip locks.
• Pre-drilled caster mounting holes.
906 Features
• Collapsible wire guide.
• Swivel caster set with 2 locking casters for easy use.
Cat. No.
905
906
33405
UPC No.
33024
33026
33405
906
Desc.
Wire Caddy
Wire Caddy w/Casters & Wire Guide
Caster Set (2 Swivel, 2 Swivel Kit)
Specifications:
Size:
16" long, 26" wide & 17-1/2" high
Capacity: Six 500' spools up to 8" in dia. of #6 thru #10 AWG 600 volt wire.
906 - 10 lbs.
Hand Truck Caddy
Swivels
• Holds up to 12 spools of #12 AWG wire or 8 spools of #10 AWG wife.
• 10" diameter pneumatic tire for jobsite portability.
• Pinless design eliminates loose parts.
• 4 solid steel 1/2" spindles included.
• Lay cart flat when dispensing wire. Upright for use as hand caddy.
• Helps eliminate winding and tangling
of rope and cable during pull.
• Connects grip and pulling rope.
• All stainless steel body construction.
• Efficient thrust and roller bearing
construction allows smooth rotation, even
under full load.
• Clevis pins are "shoulder bolt" style,
so load on both sides of clevis is taken
on the shoulder, not on the thread.
• Select the swivel with a maximum rated
capacity that meets or exceeds the cable
pulleys maximum pulling force.
Cat.
Max.
UPC Rated Cap. A
No.
(lbs)
(in)
39106 2,500
7/8
39107 5,000 1-1/4
39108 7,000 1-3/8
39109 10,000 1-5/8
39110 15,000
2
39111 25,000 2-1/2
B
(in)
2-5/8
3-1/16
3-9/32
3-15/16
4-11/16
5-11/16
Diameter
C
D
E
(in)
(in) (in)
3-1/2
7/16 3/8
4-1/8 17/32 1/2
4-17/32 5/8 9/16
5-7/16
3/4
5/8
6-9/16 15/16 3/4
8-7/16 1-3/16 1
Cat. No.
9505
Replace.
F
G
Wt. Pin Kit
(in)
(in)
(lbs) UPC No.
5/16
31/32
.4
39112
13/32 1-9/32
1.0 39113
1/2
1-3/8
1.0 39114
5/8 1-23/32 2.0 39115
11/16
2
4.0 39116
7/8 2-25/32 7.0 39117
Hand Tools
• Acts as a mechanical fuse, breaking away at a preset load to prevent
damage to expensive cable.
• Breakaway pins can be replaced to change breakaway values.
Cat./
UPC No.
39294
39295
39296
39297
39302
39303
39304
39306
39308
19 -48
Breaking
Point (lbs)
200
400
600
675
200
400
600
800
1000
Color
Code
White
Yellow
Orange
Black
White
Yellow
Orange
Grey
Red
Use
with
39290
5/8" Swivel
39298
7/8" Swivel
Desc.
Hand Truck Caddy
Specifications:
Breakaway Swivels
19
UPC No.
01205
Size:
46-5/8" long, 28-1/4" wide
Capacity: Max. Total Spool Weight: 200 lbs. 4000' #10 ga. wire
Max. Spool Dia.: 7.5"
Dolly Lift (max.): 250 lbs.
Weight: 32 lbs.
Wire Cart
• Large capacity, excellent for storing, transporting or feeding wire.
• Save space, use and store vertically or horizontally.
• 5 strong reel axles with spring clip retainers plus 2 positions for axle
storage allows you to configure for large reels with no loose parts.
• Strong, yet lightweight, tubular steel welded
construction with rugged 8" wheels.
• Built-in wire guide for horizontal dispensing.
• Will pass through a 28" opening.
Cat. No.
911
31523
50303
UPC No.
31518
31523
50303
Size:
Desc.
Wire Cart
Reel Shaft (5)
Hitch Clip (10)
54-1/2" long, 27" wide, 26-1/2" high
when horizontal
Capacity: Six 2,500' spools up to 16" in diameter.
Six 500' spools up to 8"in dia.
Weight: 62 lbs.
WWW.HANESSUPPLY.COM
Albany/NE Division:
518.438.0139
Rochester Division:
585.235.0160
FAX:
FAX:
FAX:
716.826.4412
518.438.5343 CCISCO: 843.238.1338
585.235.0229
FAX: 843.238.8337
Hand Tools
Greenlee
Deluxe A-Frame Mobile Caddy
•
•
•
•
•
•
Holds up to 24 spools of #12 AWG wire or 16 spools of #10 AWG wire.
Folds for easy storage.
Optional Basket caddy available to dispense metal clad cable.
10" diameter pneumatic tires for jobsite portability.
Pinless design eliminates loose parts.
8 solid steel 1/2" spindles included.
Cat. No.
9510
UPC No.
01214
Description
Delux A-Frame Mobile Caddy
Size:
47-7/8" high. 28-1/4" wide.
Capacity: Max. Tool Spool Weight: 400 lbs.
Max. Spool Dia: 7.5"
Weight: 47 lbs.
Cat. UPC
No.
No.
704 24564
24565 24565
24567 24567
683
Copper
350 MCM
250 MCM
Aluminum
500 MCM
350 MCM
Lenght: 21"
Weight: 3.01 lbs.
Heavy-Duty Cable Cutter
• Replaceable, shear type blades of forged, heat treated steel - precision ground.
• Designed for long, dependable service.
• Fiberglass handles with large rubber grips.
Capacity
Maximum
Frequent Use
683 - 24" 23" base; 54" max. height
687 - 14-1/2" x 20" base; 28" max. height
Capacity: 683 - 2,500 lbs. each, 46" - 96" reel diameter
687 - 2,500 lbs. each, 28" - 56" reel diameter
687 - 25 lbs.
Copper
750 MCM
500 MCM
Aluminum
1000 MCM
750 MCM
Lenght: 31-1/2"
Weight: 6.16 lbs.
Compact Ratchet Cable Cutters
Reel Rollers
Both models feature:
• Simple, one-hand operation.
• Two-speed ratchet mechanism adjusts for light/heavy cutting.
• Well suited for tight work spaces.
• Specially designed blade improves cutting capacity.
Heavy duty welded steel construction.
Built-in loading ramps.
Adjustable to various reel widths and diameters.
Roller locks for unloading.
Side ball rollers for centering.
Fast, convenient ground level set-up for paying
out large cable reels.
39660
39666
Cat.
UPC
No.
No. Desc.
45206 45206 Compact Ratchet Cable Cutter
45207 45207 Compact Ratchet Cable Cutter
Specifications:
Capacity
Copper
Aluminum
45206
Maximum
600 MCM 600 MCM
Frequent Use
500 MCM 500 MCM
Length: 10", Jaw Opening: 1-7/16"
45207
Maximum
750 MCM 1000 MCM
Frequent Use
600 MCM 750 MCM
Length: 11", Jaw Opening: 2"
WWW.HANESSUPPLY.COM
Wt.
(lbs)
1.5
2.4
45207
45206
19 -49
19
Hand Tools
39660 - 32" L x 34" W
39666 - 32" L x 11" W
Capacity: 39660 - 2,500 lbs. 30" wide.
39666 - 2,000 lbs. 42" wide.
Lenght: 18"
Weight: 2.78 lbs
Specifications:
Size:
Size:
350 MCM
Cat.
UPC
No.
No. Desc.
706
22291 Heavy-Duty Cable Cutter
22292 22292 Cutter Unit (Includes 2 Blades)
22296 22296 Handle Unit (Includes 1 each:
Handle, Sleeve, Grip)
Specifications:
Specifications:
Aluminum
Desc.
Heavy-duty Cable Cutter
Cutter Unit (Includes 2 Blades)
Handle Unit (Includes 1 each:
Handle, Sleeve, Grip)
Capacity
Maximum
Frequent Use
• Wide welded steel base for added stability.
• Roller bearings fit in the spindle groove to keep the spindle in place
and turning freely.
• Two stands and a spindle are required for a complete set-up.
Cat./
UPC No. Description
39660
Reel Roller, single platform roller, 32" L x 34" W
39666
Reel Roller, kit of two rollers & two Spreaders,
32" L x 11" W per frame
Coper
350 MCM
4/0
Specifications:
Screw Type Reel Stands
•
•
•
•
•
•
UPC
No.
Desc.
30208 Cable Cutter
• Replaceable, shear type blades of forged, heat
treated steel - precision ground.
• Designed for long; dependable service.
• Fiberglass handles with large rubber grips.
• Made in U.S.A.
Size:
36-1/4" long, 31-1/2" wide, 59" high
Capacity: Ten 2,500' spools up to 18" in diameter.
Weight: 213 lbs.
Desc.
Reel Stand 22" - 54"
Reel Stand 13" - 28"
Spindle for 683 Reel Stand
Spindle for 687 Reel Stand
Stop Pin (683-2; 687-1)
Jackscrew Replacement
Unit for 683 or 687.
Economical, lightweight; fits easily into tool boxes.
Heat treated, precision ground, shear action blades.
Steel handles with rubber grips for leverage.
Made in USA
Heavy-Duty Cable Cutter
Description
Wire Dispenser
UPC. No.
15372
17076
15375
15321
25591
38619
•
•
•
•
Capacity
Maximum
Frequent Use
• All welded steel construction.
• Base has 2 fixed and 2 swivel locking
heavy duty casters.
• The spool rack consists of 10 spindles
and an adjustable guide loop and can be
turned 360O independent of the base.
• Spindles are angled to contain reels and act
as a brake while paying out wire.
• Fits through a 36" opening.
Cat. No.
683
687
684
647
25591
38619
Cable Cutter
Specifications:
Wire Dispenser
Cat. No. UPC No.
910
21982
Specifications:
CUTTERS, STRIPPERS, CRIMPERS,
CONNECTORS & HAND TOOLS
Cat.
No.
718
Specifications:
®
Albany/NE Division:
518.438.0139
Rochester Division:
585.235.0160
FAX:
FAX:
FAX:
716.826.4412
518.438.5343
585.235.0229
CCISCO: 843.238.1338
FAX:
843.238.8337
Hand Tools
Greenlee®
Compact Ratchet Cable Cutters
Hydraulic Cable Cutter
Both models feature:
• Compact, patented ratchet design.
• Versatile - for most field cutting applications.
• Convenient one-hand operation for tight work spaces.
• Quick release - interrupts cut without full cycle.
• Flip open head provides strength while making it easy to cut long lengths.
• Head rotates 180°.
• Thumb release lever for quick blade retraction.
Cat.
No.
752
753
UPC
No. Desc.
35465 Compact Ratchet Cable Cutter
34954 Compact Ratchet Cable Cutter
Wt.
(lbs)
1.1
2.5
Cat.
No.
HK510GL
03701
03685
752 / 35465
Desc.
Hydraulic cable Cutter
Cutter Blade
Fixed Cutter Head
Specifications:
Capacity:
Aluminum & Copper Cable, ACSR: 3/4"
Std. Guy Wire, Ground Rod Rebar: 1/2"
Soft Steel Bolts: 11/16"
Wire Rope: 3/4"
Length:
14.5 lbs.
Weight: 5.7 lbs.
Specifications:
Capacity
Copper
Aluminum
752 / 35465
Maximum
600 MCM 600 MCM
Frequent Use
350 MCM 500 MCM
Length: 9", Jaw Opening: 1-3/16"
753 / 34954
Maximum
750 MCM 750 MCM
Frequent Use
500 MCM 750 MCM
Length: 10-1/2" Jaw Opening: 1-1/2"
753 / 34954
GatorTM - Battery Powered Cable Cutters
Ratchet Cable Cutter
• High leverage for easier cutting.
• Anti-slip mechanism ensures positive ratcheting.
• One handle stationary while the other ratchets for use in deep boxes or
against walls.
• Durable, lightweight fiberglass handles.
Cat.
No.
764
UPC
No.
02644
03701
03685
UPC
No. Desc.
35516 Ratchet cable Cutter
36037 Cutter Head Unit (2 Blades)
•
•
•
•
•
•
•
Cuts in 22 seconds. Jaws flip to save time between cuts.
Approximately 120 cuts per battery charge.
Jaws specially hardened and precision ground to hold sharpness.
Lightweight & easy to use pistol grip provides excellent control & balance.
Cutting head rotates 330° for cutting cables in fight locations
Includes one hour battery charger, carrying case and two batteries.
Choice of a 120 volt 230 volt or 12 volt battery charger.
Cat.
UPC
No.
No. Desc.
ESG50GL11 03554 Battery Powered Cable Cutter 120 Volt Charger
Specifications:
Capacity
Maximum
Frequent Use
Length: 19-1/8"
Specifications:
Copper
Aluminum
750 MCM 795 MCM
500 MCM 750 MCM
Jaw Opening: 1-3/16" Weight: 5.28 lbs.
Capacity: 1.75" dia. Al or Cu cable
Length: 15.75"
Height: 14.25"
Weight: 10 lbs.
Battery: 12 Volts Ni Cd
Heavy-Duty Ratchet Cable Cutters
Battery Powered 6 Ton Crimping Tool
• Extra thick blades, ground flat to reduce potential for breakage.
• Ratchet action for heavy-duty cutting.
• Two cutting actions - fast scissor cutting for small cable and
insulation; converts automatically to ratchet mode.
• Anti-slip mechanism for positive ratchet action.
• Rubber boot protects ratchet mechanism.
• Approximately 120 crimps per battery charge.
• Crimps a very wide range of connector sizes.
• Accepts Greenlee K22 series dies and industry “W” and “X” dies.
• UL classified and CSA certified to 600 MCM
with Anderson, Blackburn, Burndy ILSCO,
Panduit, Thomas & Betts and Penn-Union
copper connectors when used with K22 series dies.
• Flip-top style opens easily with simple push on latch
and rotates 330°.
• 6 tons crimping force.
• One hour battery charger, 2 batteries and carrying
case included.
• Choice of 120 volt, 230 volt, or 12 volt battery charger.
Cat.
No.
756
756U
UPC
No.
34081
38793
34188
Desc.
Heavy Duty Ratchet Cable Cutter w/Rubber Boot
Heavy Duty Ratchet cable Cutter w/o Rubber Boot
Cutter Head Unit (includes 2 Blades)
Specifications:
Capacity
Copper
Aluminum
Maximum
1500 MCM 1500 MCM
Frequent Use
1000 MCM 1000 MCM
Length: 27-1/2" long Jaw Opening: 2" Weight: 11.41 lbs.
Cat. No.
EK22GL11
EK22GL22
EK22GL12
Ratchet ACSR/Cable Cutter
Hand Tools
19
• Extra thick blades, ground flat to reduce potential for breakage.
• Ratchet action for increased cutting power.
• Two cutting actions - fast scissor cutting for small cable;
converts automatically to ratchet mode.
• Anti-slip mechanism for positive ratchet action.
• Rubber boot protects ratchet mechanism.
UPC No.
03551
03553
03552
Specifications:
Capacity: See crimping tool capacity chart.
Battery Voltage: 12.0 volts Battery Charge Time: 50 minutes
Crimping Force: 6 tons
Length: 12.875" Weight: 9.2 lbs. with battery
Cat.
UPC
No.
No. Desc.
757
34084 Ratchet ACSR/Cable Cutter
757U 38794 Ratchet ACSR/Cable Cutter w/o Rubber Boot
34187 34187 Cutter Head Unit (includes 2 Blades)
Specifications:
Capacity: 954 MCM ACSR, 1/2" soft steel rod
Length:
29-1/4",
Jaw Opening: 1.18"
Weight:
12.22 lbs.
19 -50
Description
6 ton Battery Powered Crimper with 120 Volt Charger
WWW.HANESSUPPLY.COM
Albany/NE Division:
518.438.0139
Rochester Division:
585.235.0160
FAX:
FAX:
FAX:
716.826.4412
518.438.5343 CCISCO: 843.238.1338
585.235.0229
FAX: 843.238.8337
Hand Tools
Greenlee
®
6 Ton Hydraulic Crimping Tool
14 Ton Die-Type Crimper
• UL classified and CSA Certified to 600 MCM with Anderson, Blackburn,
Burndy, ILSCO, Panduit, Thomas & Betts and Penn-Union copper connectors when used with K22 series dies.
• Crimping head rotates 360O
• Accepts Greenlee K22 series dies and industry “W” type dies.
• Flip open style head opens easily with simple push on latch.
• Delivers 14 tons of hydraulic force for crimping applications including
lugs, splices, tension sleeves and “C” and “H” taps.
• 1-1/2" jaw opening for large conductors and taps.
• Automatic two-speed pump action for rapid ram advancement.
• Fast ram release w/twist of handle.
• 360O continuous head rotation.
• Sturdy, rust-proof fiberglass
handles with comfort grips.
Includes metal storage case.
• Uses standard "U" type dies.
• Includes steel carrying case.
Cat. No. UPC No. Desc.
HK5/22GL 02651 22-Series Hydraulic Crimper
Capacity: See Crimping Chart
Length: 16.5"
Weight: 8.4 lbs.
Cat. No.
1985
35887
48912
UPC No.
35728
35887
48912
6 Ton 22-Series Crimping Tool
• UL classified CSA certified to 600 MCM with Anderson,
Blackbun Bumdy, ILSCO, Panduit, Thomas & Betts, and
Penn-Union copper connectors when used with K22 series dies.
• Crimping head rotates 360O.
• Telescoping handles for easy storage and low handle effort
• Accepts Greenlee K22 series and industry “W” type dies.
• Flip open style head opens easily with simple, push on latch.
Cat. No.
K22GL
Desc.
Die Type Crimper
Load Cell w/Test Blocks
Test Blocks (for use w/load cells to
test crimping force)
Specifications:
Length: 23"
Weight: 15.5 lbs.
12 Ton Die-Type Crimper
•
•
•
•
•
•
•
•
UPC No. Desc.
02648
22-Series Crimper
12 tons of force for crimping lugs, splices, overhead connectors & taps.
1-3/16" jaw opening - crimps up to 500 MCM.
Automatic two-speed pump reduces cycle time.
Ram retracts quickly with a simple twist of the handle.
Head rotates 360O for use in tight locations.
Fiberglass handles with rubber grips.
Uses all “U” style dies.
Includes steel carrying case.
Cat. No.
1984
35887
48912
Length: 23.25" handles collapsed, 33.125" handles extended
Weight: 7.7 lbs.
UPC No.
03670
35887
48912
Desc.
Die Type Crimper
Load Cell w/Test Blocks
Test Blocks (for use w/load cells to
test crimping force)
Specifications:
Length: 22"
Weight: 12.6 lbs.
Greenlee Crimping Tool Capacities
Tool Type
K05-1GL
Rotating Die
K09-2GL K09-3GL
Serv Ent
K91GL
Connector
Type
1
1
1
#8 - 1/0
#8 - 1/0
–
–
–
–
–
#8 - 4/0
#8 - 4/0
–
–
–
–
–
3/0 - 400
3/0 - 400
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
12 Ton
2510
1984
2520
1985
1980
Dieless
1989
1990
3
3
#8 - 600
#8 - 600
#8 - 4/0
#8 - 4/0
#12 - #2
#6 - 500
#6 - 1/0
#8 - 750
#8 - 400
#8 - 750
#8 - 400
#12 - 4/0
#6 - 500
#6 - 500
#8 - 750
#8 - 750
#8 - 750
#8 - 750
#12 - 4/0
#6 - 500
#6 - 750
#8 - 4/0
#8 - 4/0
–
–
–
–
–
#4 - 500
#4 - 500
#6 - 500
#6 - 500
–
–
#6 - 500
#4 - 1000
#4 - 1000
#6 - 1000
#6 - 1000
–
–
#6 - 750
–
–
#6 - #3
–
#6- 500
#6 - 500
#6 - 500
#6 - 500
–
–
–
–
–
–
#10 - 1/0
–
–
–
–
–
–
–
–
–
–
–
#10 - 1/0
1/0 - 4/0
#6 - 4/0
#12 - #2
#6 - 2/0
#6 - 4/0
#4 - 1/0
#2 - 4/0
#4 - 266.8
#6 - 4/0
#4 - 4/0
1/0 - 2/0
#10 - 1/0
1/0 - 4/0
#6 - 4/0
#12 - 4/0
#8 - 500
#6 - 587.2
#4 - 556.5
#2 - 556.5
#4 - 556.5
#6 - 500
#4 - 556.5
1/0 - 500
#10 - 1/0
1/0 - 4/0
#6 - 4/0
#12 - 4/0
#8 - 500
#6 - 587.2
#4 - 556.5
#2 - 556.5
#4 - 556.5
#6 - 500
#4 - 556.5
1/0 - 500
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
WWW.HANESSUPPLY.COM
NOTES:
1. Die wheels are rotated to
match the cable size. Dies
are color coded and marked
with the cable size.
2. Burndy “X” dies are used for
industrial aluminum lugs and
splices, Burndy “W” dies are
used for all other connectors
shown. Greenlee K22 series
dies may also be used for
copper splices & lugs.
3. Used with “U” dies.
19 -51
19
Hand Tools
Notes:
INDUSTRIAL
Copper Lugs
Copper Splices
Aluminum Lugs
Aluminum Splices
Copper "C" Taps
Aluminum "H" Taps
Aluminum in Adapters
GROUNDING
Ground Grid Connectors
Copper "E" Taps
OVERHEAD
5/8" Service Ent. Connectors
840 Service Connectors
Aluminum "H" Taps
Copper "H" Taps
Copper Tension Splice
All Aluminum Tension Splice
One Piece ACSR Tension Splice
Two Piece ACSR Tension Splice
Aluminum Jumper Splice
Stirrups
Aluminum Lugs
Copper Lugs
6 Ton
PK22GL
EK22GL
HK2/22GL
K22GL
2
Albany/NE Division:
518.438.0139
Rochester Division:
585.235.0160
FAX:
FAX:
FAX:
716.826.4412
518.438.5343
585.235.0229
CCISCO: 843.238.1338
FAX:
843.238.8337
Hand Tools
Greenlee®
TESTING
Analog Multimeter
• Measures AC/DC voltage, DC current plus
resistance and battery check.
• 3-Color Mirrored Scale.
• Fuse protected.
• Lead holding protective boot
AC DetectiveTM - Voltage Detector
•
•
•
•
•
Detects AC voltage without touching live circuits.
Audible and visual indicators.
Pocket size; auto-on.
Has an easy flip-up cap for replacing batteries.
Made in USA.
Cat. No.
93-502
Cat./UPC No. Desc.
38880
AC DetectiveTM AC Voltage Detector
Capacity: Detects 50 to 600 VAC
Size: 5-3/8" long
Weight: 1 lb.
Batteries: 2 - AAA, included
Digital Multimeter
• Measures AC/DC voltage, DC current, plus resistance,
diode test hFE test and continuity.
• Pocket-sized, digital meter with 3-1/2 digit LCD read-out.
• Polarity, low battery and overload indication.
• Includes battery and leads.
Voltage & Continuity Testers
6706 & 6708 feature:
• AC/DC switchless, dial-free voltage test
• Polarity indicator.
• Progressive LEDs indicate voltage.
• Test resistance up to 800K ohms.
• Automatic range selection.
• One probe indicates hot side with light and buzzer.
• Spring-loaded probe tips.
• Solid-state design, no mechanical parts.
• Internally protected from damage if voltage is
encountered while in continuity mode.
UPC No.
34729
34521
34572
35448
35449
Cat. No.
93-602
93-602TL
• Indicates whether Ground Fault Circuit Interrupter is acceptable at 3mA,
5mA, 6mA, 7mA and 10mA.
• Tests and indicates conditions of GFCls and circuits.
• Indicators for wiring errors glow in combinations to signal one of the following wiring conditions: correct wiring, open ground, open neutral, open
hot hot/ground reversed, hot/neutral reversed.
• Recommended for testing Pass and Seymour.
Capacity: 6706 - VAC & VDC 12, 48, 120, 208, 277, 480 & 600
6708 - VAC & VDC 6, 12, 24, 50, 115, 240 & 440
Size:
8" x 2-1/4" x 1-1/2"
Weight: .5 lbs.
Cat. No.
57081
AC/DC Clamp-On Ammeter
Capacity:
AC Current, amp range - 0 - 1000A
DC Current, volt range - 0 - 1000A
Frequency Hz Range - 4K, 10K
Max. Conductor Size - 2"
Size: 9-1/2" x 4-1/4" x 1-1/2"
Weight: 14.28 oz.
Battery: 9 Volt Battery, included
Digital Clamp-On Meter
Hand Tools
19
Ammeter, Voltmeter and Ohmmeter
features:
• Digital LCD read-out with data hold
function.
• Peak hold switch for starting surge
current.
• Low battery indicator.
• Overload indication.
• Battery, leads and case included.
Cat. No.
93-8010
93-8010C
93-8010TL
19 -52
UPC. No.
34461
34870
34869
Desc.
Digital Clamp-On Meter
Storage Case
Leads
Desc.
Digital Multimeter
Leads (2)
Inspector GFCI and Circuit Tester
Specifications:
Cat. No. UPC. No. Desc.
93-812 02030
AC/DC Clamp-On Ammeter
02027
02027
Carrying Cse
UPC. No.
00044
00046
Capacity:
DC Voltage - 2, 20, 200, 1000 V
DC Current - 2, 20, 200mA
AC voltage - 200, 750 V
Resistance - 200, 2k, 20k, 200kΩ, 2MΩ
Size: 2.8 x 4.7 x 1.5 in.
Weight: 6.7 oz.
Battery: 1 - 9V, included
Desc.
Voltage & Continuity Tester
Voltage & Continuity Tester
Hoister - Accessory
Battery Door for 6706
Battery Door for 6708
• Provides 1000 ACA/DCA range with
hall effect sensing.
• Features peak hold key, auto zero key
for DCA and auto power off.
• Large jaw size.
• 3-3/4 digit LCD read-out.
• Low battery level icon.
• Frequency counter.
• Auto off feature to extend battery life.
Desc.
Analog Multimeter
Capacity:
DC Voltage - 0-2.5, 10, 50, 250, 500V
DC Current: 0-500u, 10m, 250mA
AC voltage - 0-10, 50, 500V
Resistance - 0-20K, 2MΩ (RX10/RX1k)
Battery Test: 1.5V "AA" and 9V
Size: 4.72 x 2.36 x 1.18 in. Weight: 5.2 oz. Battery: 1.5V "AA"
Specifications:
Cat. No.
6706
6708
6723
35448
35449
UPC. No.
01304
Capacity:
Max. Amps - 1000A
AC Current, amp range - 20, 200, 1000A
AC voltage, volt range - 200, 750V
Resistance, ohms range - 0 - 2000
Jaw Capacity - 2"
Size: 10" x 3" x 1-1/2"
Weight: 1.6 lbs.
Battery: 1 - 9V, included
UPC. No.
34524
Desc.
Inspector GFCI and Circuit Tester
Capacity: 120 VAC, 3 wire Systems
Size: 5-3/8 x 2-5/8 x 1-3/8 in.
Cord Length: 16"
Weight: .5 lb.
Accuracy: Current =/ 10% + 1mA, Time =/ 12%
Test Durration:
Current - mA
Time Durration - Sec.
3
15
5
5
6
4
7
3
10
2
Universal Test Set
The DSV Universal Test Set is used to troubleshoot communication circuits.
• Data and digital safe monitor.
• Attractive, ergonomic design for comfortable, every day use.
• Rounded design for snug fit on shoulder.
• 10 number memory, 2-tone ringer and a high impedance monitor.
• Includes ringer, redial feature, mute and polarity
indicator.
• Tough, impact-resistant case that can withstand
a 20 foot drop.
• Hermetically Sealed (floats in water).
• Premium electronics eliminate noise and
interference.
• Angled bed of nails alligator clip cord set.
Heavy duty, spring loaded belt clip.
• CE Compliant.
Cat. No.
45053
UPC. No.
45053
Length: 9-3/4 in.
Weight: 1.2 lb.
WWW.HANESSUPPLY.COM
Desc.
Universal Test Set
Albany/NE Division:
518.438.0139
Rochester Division:
585.235.0160
FAX:
FAX:
FAX:
716.826.4412
518.438.5343 CCISCO: 843.238.1338
585.235.0229
FAX: 843.238.8337
Hand Tools
Greenlee®
STORAGE, MISC.
Slant Top Boxes
Small Storage Boxes
•
•
•
•
• Protects small tools and supplies. Single lock hasp for use with padlock.
• Compact side handles for easy portability.
• Heavy-duty hinges plus chain connector to
hold lid in upright position.
• Welders box (1230/31510) has cutout for
hoses.
Cat.
No.
1230
1531
UPC
No.
31510
23274
Cap.
Ft 3
3.3
4.5
Ht.
(in)
12
15
Width
(in)
30
31
Depth
(in)
16
18
Wt.
(lbs)
48
51
Cat.
No.
2260
3648
3660
Mobile Storage Boxes
• Easy mobility for jobsite or shop use.
• Dual recessed and concealed lock protectors for maximum security
against drilling and cutting lock.
• Built-in pretapped skids for easy caster installation.
• Large fold-down recessed handles for convenient lifting.
• Heavy-duty piano hinges with non-removable pin.
• Steel support arms to hold lid in upright position.
• Convenient storage tray on back wall for small
items (Models 2448, 2460 and 3048 only).
Cat.
No.
1332
1636
2142
2448
2460
3048
UPC
No.
38717
38718
31651
23273
23363
23362
Cap.
Ft 3
4.9
6.7
9.7
16
20
25
Ht.
(in)
14
17
20
24
24
30
Width
(in)
32
36
42
48
60
48
Depth
(in)
19
19
20
24
24
30
Wt.
(lbs)
83
99
113
146
182
183
UPC
No.
Desc.
15341 2 Rigid, 2 Swivel
35113
4 Swivel
Wheel
Dia. Thread
(in)
(in)
4
2
4
2
4
2
Cap. per
Wheel
(in)
400
375
400
Casters not
included
Ship
Wt.
(lbs)
13
10
13
• Flat-top design provides more storage capacity for tall, bulky items, plus
a large work surface for jobsite plans.
• Gas springs allow easy opening & closing.
• Double-hinged cover folds up & locks out of the way.
• Dual recessed & concealed lock protectors provide
maximum security against drilling & cutting locks.
• Features two reinforced steel shelves with large lip
to prevent items from rolling off.
• Channel reinforcements on lid lock side panels into
lid for added security when closed.
• Large fold-down recessed handles for convenient
lifting.
UPC
No.
38719
35043
35057
Cap.
Ft 3
34.5
40
50
Ht.
(in)
33
48
48
Width
(in)
60
48
60
Depth
(in)
30
30
30
Wt.
(lbs)
256
292
305
Accessories - Casters:
UPC
No.
15341
30239
35113
53904
Width Depth
(in)
(in)
60
32
48
30
60
30
Back
Ht.
(in)
36
48
48
Wt.
(lbs)
228
273
282
Casters not
included
Cat.
No.
666
695
694
53950
53951
UPC
No.
15341
30239
35113
53950
53951
Wheel
Dia. Thread
Desc.
(in)
(in)
2 Rigid, 2 Swivel
4
2
2 Rigid, 2 Swivel
4
2
4 Swivel
4
2
Gas Springs for 2260
Gas Springs for 3648 and 3660
Cap. per
Wheel
(in)
400
375
400
Ship
Wt.
(lbs)
13
10
13
• Maximum storage capacity with minimum floor space requirements.
• Four individual 15" d. x 14-1/2" h. x 60" w. storage compartments on
each side.
• Reinforced steel shelves welded in place for added strength & durability.
• All shelves feature large front lip to keep small items from rolling off.
• Each bi-fold section is mounted on four casters
for easy opening and closing.
• Sturdy lifting eyes for transporting from floor to
floor on construction sites.
• Large fold-down recessed handles.
• 6 swivel and 2 rigid 4" casters included.
Wheel
Cap. per Ship
Dia. Thread
Wheel
Wt.
Desc.
(in)
(in)
(in)
(lbs)
2 Rigid, 2 Swivel
4
2
400
13
2 Rigid, 2 Swivel
4
2
375
10
4 Swivel
4
2
400
13
Gas Springs for 3360, 4848 & 4860 storage boxes.
Casters not
included
UPC
No.
35068
Cap.
Ft 3
60.4
Ht.
(in)
58
Width
(in)
60
Depth
(in)
30
Wt.
(lbs)
548
Double-Door Utility Cabinet
• Complete workshop for storing supplies and tools close to work area.
• Double doors swing wide for full access to interior.
• Shelves feature large front lip to keep small
items from rolling off.
• Top features full-length rain gutter for weather
protection.
• Sturdy lifting eyes for transporting from floor
to floor on construction sites.
• Optional casters available.
Cat. UPC
No.
No.
5660 30401
Cap.
Ft 3
46
Ht.
(in)
56
Width
(in)
60
Depth
(in)
24
Wt.
(lbs)
401
Wheel
Cap. per
Cat. UPC
Dia. Thread Wheel
No.
No.
Desc.
(in)
(in)
(in)
503 28044
2 Swivel
6
2
500
603 23405 2 Rigid, 2 Swivel
6
2
500
WWW.HANESSUPPLY.COM
19
Ship
Wt.
(lbs)
22
20
Hand Tools
Cat.
No.
666
695
694
53904
Front
Ht.
(in)
22
36
36
Cat.
No.
5860
Flat Top Boxes
Cat.
No.
3360
4848
4860
UPC Cap.
No.
Ft 3
23270 32
23276 34
23196 44
Bi-Fold Utility Cabinet
Cat.
No.
666
695
694
Large capacity storage with traditional slant-top design.
Gas springs allow easy opening and dosing.
Double-hinged cover folds up and out of the way.
Dual recessed and concealed lock protectors provide maximum security
against drilling and cutting locks.
• Features two reinforced steel shelves with large
lip to prevent items from rolling off (Model 2260,
one shelf only).
• Add optional casters for easy mobility.
19 -53
Albany/NE Division:
518.438.0139
Rochester Division:
585.235.0160
FAX:
FAX:
FAX:
716.826.4412
518.438.5343
585.235.0229
CCISCO: 843.238.1338
FAX:
843.238.8337
Hand Tools
Greenlee®
Field Office
Double-Door Utility Cabinet with
Lock Protector
•
•
•
•
• Flush mounted doors.
• Concealed lock protector provides maximum
security.
• Large fold-down recessed handles for
convenient lifting.
• Secure storage with easy access.
Cat.
No.
5660L
UPC
No.
38659
Cap.
Ft 3
46
Ht.
(in)
56
Width
(in)
60
Depth
(in)
24
Cat.
No.
8060
Casters not
included
Ship
Wt.
(lbs)
22
20
• Concealed lock protector provides
maximum security.
convenient lifting.
UPC
No.
38722
Cap.
Ft 3
59.3
Ht.
(in)
57
Width
(in)
60
Depth
(in)
30
UPC
No.
Desc.
28044
4 Swivel
Wheel
Dia. Thread
(in)
(in)
6
2
6
2
Casters not included
Wt.
(lbs)
437
Cap.
Ft 3
23
Ht.
(in)
35
Width
(in)
48
Depth
(in)
24
Cap. per
Wheel
(in)
500
500
Ship
Wt.
(lbs)
22
20
Wt.
(lbs)
257
Hand Tools
• Flush mounted doors
maximum security.
convenient lifting.
Cat.
No.
3448
UPC
No.
38720
Cap.
Ft 3
22.5
Ht.
(in)
34
Width
(in)
48
Depth
(in)
24
UPC
No.
Desc.
28044
4 Swivel
19 -54
Wheel
Dia. Thread
(in)
(in)
6
2
6
2
Wt.
(lbs)
626
Cap. per
Wheel
(in)
500
500
Ship
Wt.
(lbs)
22
20
Cap.
Ft 3
36.8
Ht.
(in)
54
Width
(in)
28
Depth Wt.
(in) (lbs)
57
401
UPC
No.
Desc.
28044
4 Swivel
Wheel
Dia. Thread
(in)
(in)
6
2
6
2
Cap. per
Wheel
(in)
500
500
Ship
Wt.
(lbs)
22
20
• 7 individual bins allow you to sort by size
and type.
• Made of structural square tubing.
• Folds down for storage.
Cat. No.
668
503
603
UPC No.
15343
28044
23405
Desc.
Mobile conduit and Pipe Rack
6" Dia. Caster Set, 4 Swivel
6" Dia. Caster Set, 2 Swivel and 2 Rigid
Specifications:
Capacity:
1000 lbs.
Dimensions: 58" H. x 58-1/2" L. x 34" W.
Folded Down: 15-1/2" H. x 61" L. x 34" W.
Weight:
100 lbs.
Pipe Cart
• Easy one-person operation saves time and money.
• Move standard 20 ft. lengths of pipe.
• Large 4.80" x 8" wheels with 4-ply pneumatic tires and
precision roller bearings for easy rolling.
• Heavy-duty steel construction for long service life.
Cat.
No.
36745
Wt.
(lbs)
201
UPC
No.
04460
UPC
No.
36745
Desc.
Pipe Cart
Casters not
included
Cat.
No.
503
603
Depth
(in)
42
Conduit and Pipe Storage
Rack
2-Door Cabinet
19
Width
(in)
60
Wheel
Cap. per
UPC
Dia. Thread Wheel
No.
Desc.
(in)
(in)
(in)
28044
4 Swivel
6
2
500
6
2
500
Cat.
No.
503
603
maximum security.
• Large capacity storage box that's also
a workbench.
• Tough composition board work surface
on top with built-in chain vise and
telescoping wrench stop.
Casters included
• Two swivel casters and two rigid casters for easy mobility.
• Four reinforced steel shelves with large lip to prevent items from rolling off.
• Large fold-down recessed handles for convenient lifting.
UPC
No.
31229
Cat.
No.
503
603
Cat.
No.
560MESH
Mobile Workbench
Cat.
No.
3548
Ht.
(in)
80
• High visibility mesh screen on 3 sides.
• 1/2" conduit support tunnels for top storage
(conduit not included).
• Sturdy handle for mobility.
• Compartments on doors for small tool and
parts storage.
• Platform for shovels, picks, brooms and
other long handle tools.
Cat.
No.
503
603
Cap.
Ft 3
116.5
Mesh Job Box
4-Door Cabinet
(2 Front, 2 Rear)
Cat.
No.
5760
UPC
No.
38724
Wt.
(lbs)
401
Wheel
Cap. per
Cat. UPC
Dia. Thread Wheel
No.
No.
Desc.
(in)
(in)
(in)
503 28044
4 Swivel
6
2
500
603 23405 2 Rigid, 2 Swivel
6
2
500
Separate storage for tools and blueprints.
Built-in key lock for top section.
Bottom section has lock protector.
Optional casters available.
Ship
Wt.
(lbs)
22
20
WWW.HANESSUPPLY.COM
Dia.
(in)
20
Wt.
(lbs)
1000
Casters not
included
Albany/NE Division:
518.438.0139
Rochester Division:
585.235.0160
FAX:
FAX:
FAX:
716.826.4412
518.438.5343 CCISCO: 843.238.1338
585.235.0229
FAX: 843.238.8337
Hand Tools
H&M
Band-Type Pipe Cutting
and Beveling Machine
H&M Pipe Beveling Machine Co., Inc.
H&M Standard Beveling
Machines
H&M is the leader with its Band-Type
Pipe Cutting and Beveling Machine for
speed, accuracy and versatile operations
on large-diameter pipe. The H&M
Motorized Beveling Head is constructed
of cast aluminum. Its lightweight, compact design allows for easy one-man
setup and operation. Seventeen different
stainless steel bands provide a cutting
range of 10" - to 96" -diameter pipe, plus
special bands are available to cut pipe
diameters up to 20 feet. In about five minutes a single operator can
position the band and beveling machine head on 48" -diameter pipe and
begin the cutting process. H&M’s machine has the following features:
Net Ship.
Model
Wt.
Wt.
Ship.
No.
Std. Pipe Sizes (in)
(lbs) (lbs)
Dim.
Manual
No. 0
2
2.5
3
4
9.50
12
9 x 11 x 11
Std.
No. 1
3
4
6
8
18
25
13 x 16 x 17 Std.
No. 2
7
8
10
12
27
38
15 x 22 x 22 Std.
No. 3
14 16
18
20
55
75
13 x 34 x 34 Std.
No. 4
20 22
24
26
81
118 14 x 36 x 45 Std.
No. 30 24 26
28
30
92
133 14 x 38 x 48 Std.
No. 5
30 32
34
36
145
250 16 x 48 x 61 Std.
No. 42 36 38
40
42
185
320 23 x 53 x 63 Std.
No. 6
42 44
46
48
220
350 24 x 55 x 72 Std.
Spacers for odd pipe sizes and tubing can be special ordered
Motorized
Opt.
Opt.
Opt.
Opt.
Opt.
Opt.
Opt.
Opt.
Opt.
Cuboid
Spacer
(Patented)
Std.
Std.
Std.
Std.
Std.
Std.
Std.
Std.
Std.
Shape Cutting Attachments and Templates
Even novices to pipe cutting and beveling
can achieve superior-quality craftsmanship
in making saddles, Y’s, T’s, miters and various angle cuts on all H&M machines with
shape cutting attachments and templates.
Each custom-made, H&M prefabricated
metal template is bolted to the face of the
ring gear. The torch is spring-loaded
against the template. While the machine
rotates around the pipe, the torch moves
along the same path as the template. The
triangular design of hard-anodized travel
tubes and carriage rollers ensures lateral
torch stability and smooth, consistent, horizontal torch travel during a complete revolution. Achieve accurate cuts from proven
patterns every time, even when cutting
miters up to 45 degrees.
Model
Net Wt.
No.
(lbs)
Model No. 0
7
Std. 24"
11
Std. 36
13
Recommended
Usage
Model No.0
Model Nos. 1 & 2
Model Nos. 3 & 4
Examples of
CustomMade
Templates
from H&M
H&M Stainless Steel Bands
•
•
•
•
•
Economical – each band overlaps numerous pipe sizes
Automatically compensates for over- and under-sized pipe
Unaffected by dope or coating on the pipe
Assures accuracy – overlapping squares up the band
Flexibility conforms to out-of-round pipe
H&M Motorized Beveling Machine Head
• Rugged, lightweight cast aluminum chassis
• Easily portable at only 18 lbs.
• Works with all H&M stainless steel bands
• Variable speed control box with forward and reverse capabilities
• Standard 90-volt DC motor
• Speed ranges – 2 ipm to 24 ipm
• 220-volt optional
• Plasma speeds optional.
Note: The optional H&M Band-Type Machine Storage Box is ruggedly constructed,
making it a safe storage place for one beveling machine head and several bands, plus
torches, cutting tips, strikers, tip cleaners and more.
Band-Type Pipe Cutting and Bev
Model
Beveling Machine Head
Storage Box
Ship.
Part No. Wt.(in)
BMH
20
BANDBOX
38
Ship.
Dim.(in)
18 x 12 x 10
24 x 24 x 10
Note: Head includes a 115-volt AC control box, DC reversible motor, torch holder and
works with all band sizes (cutting torch and tip not included).
Note: Box provides storage for one beveling machine head and multiple bands.
Stainless Steel Bands
Pipe Sizes Ship. Wt.
Ship Dim.
Model No. Part No.
(in)
(lbs)
(in)
14" Band
BAND14
10 to 14
6
12 x 12 x 10
20" Band
BAND20
14 to 20
8
12 x 12 x 10
26" Band
BAND26
20 to 26
9
12 x 12 x 10
30" Band
BAND30
26 to 30
10
12 x 12 x 10
36" Band
BAND36
30 to 36
12
20 x 20 x 13
42" Band
BAND42
36 to 42
14
20 x 20 x 13
48" Band
BAND48
42 to 48
15
20 x 20 x 13
56" Band
BAND56
48 to 56
16
20 x 20 x 13
60" Band
BAND60
56 to 60
17
20 x 20 x 13
64" Band
BAND64
60 to 64
18
20 x 20 x 13
68" Band
BAND68
64 to 68
19
20 x 20 x 13
72" Band
BAND72
68 to 72
20
20 x 20 x 13
76" Band
BAND76
72 to 76
21
20 x 20 x 13
80" Band
BAND80
76 to 80
22
20 x 20 x 13
84" Band
BAND84
80 to 84
23
20 x 20 x 13
90" Band
BAND90
84 to 90
24
20 x 20 x 13
96" Band
BAND96
90 to 96
25
20 x 20 x 13
Larger bands quoted upon request.
Note: Each band includes a drive chain & a coupling.
19
Hand Tools
WWW.HANESSUPPLY.COM
19 -55
Albany/NE Division:
518.438.0139
Rochester Division:
585.235.0160
FAX:
FAX:
FAX:
716.826.4412
518.438.5343
585.235.0229
CCISCO: 843.238.1338
FAX:
843.238.8337
Hand Tools
H&M
General Pipe Clamps
H&M Pipe-End-Prep Lathes
H&M presents the perfect tools for beveling, facing and counterboring,
the H&M Pipe-End-Prep Lathe PEPL-400 for 1" to 4" pipe or tube and
he PEPL-800 for 3" to 8" pipe or tube.
Both tools place bevels, lands and counterbore on ferrous and nonferrous
materials up to SCH 160. Special tooling is available for heavier wall thicknesses. They are pneumatic-driven, lightweight, portable and complete
with the following features and specifications.
PEPL-400
• 1" to 4" pipe capacity – 1" SCH 40
(1.049 ID) to 4" SCH 40 (4.02 ID)
• 1-5/8 hp heavy-duty pneumatic motor –
55 cfm and 90 psi
• One mandrel fits 1" to 4" pipe
• Adjustable "lock in" torque-accepting
mandrel eliminates backlash and chatter
• 4" cutter head
• Bevels, faces and counterbores
simultaneously
• 2" cuter head available for confined
spaces
• One 37.5-degree bevel bit (PB-0333)
and one facing bit (PB-0258)
• Heavy-duty storage case
• Operation Manual
• Portable
• Net weight 24 lbs.
Note: The H&M Adjustable Pipe Clamp and General Pipe clamps are only designed
for aligning pipe ends while welding. DO NOT use these clamps to support the weight
of a pipe being lifted or moved and DO NOT use these clamps with shims, wedges or
cheaters.
PEPL-400
Model
Pipe Sizes (in)
Standard
2" to 60"
Standard No Tack
3" to 60"
Hydraulic
16" to 60"
Hydraulic No Tack
16" to 60"
Ratchet
10" to 60"
Ratchet No Tack
14" to 60"
Ratchet
Pipe Clamp
• 3" to 8" pipe capacity – 3" SCH 40 (3.068
ID) to 8" SCH 40 (7.981 ID)
• 2-1/2 hp heavy-duty pneumatic motor –
PEPL-800
70 cfm and 90 psi
• One mandrel fits 3" to 8" pipe
• Adjustable "lock-in" torque-accepting mandrel eliminates backlash and
chatter
• Two sets of tool bit holders: one set 3" to 6" and one set 4" to 8"
• Bevels, faces and counterbores simultaneously
• One 37.5-degree bevel bit (PB-2905) and one facing bit (PB-2904)
• Heavy-duty storage case
• Operation manual
• Portable
• Net weight 58 lbs.
H&M APC-16 Adjustable Pipe Clamp
Hydraulic
Pipe Clamp
H&M introduces its new Master Chain
Clamp, a versatile clamping system
designed to increase productivity. One
person can quickly and safely perform
perfect fit-ups of flanges, tees and elbows
in minutes. Each Master Chain Clamp works
4" - to 16" -diameter pipe/fittings. Additional
chain links and jackbars can be added for
larger pipe sizes. The clamp weighs 28 lbs.
when fully assembled, but can be streamlined when working smaller-sized pipe.
Set-up, positioning and alignment for welding is now faster, easier & more precise.
WARNING: H&M’s Master Chain Clamp is exclusively designed as a precision tool
for aligning pipe fittings to pipe and end-to-end alignment of pipe for welding. It is
NOT intended to support or lift the entire length of a pipe. Always exercise extreme
caution when using this product.
Quick-Acting
Flange Pins
With H&M’s Quick-Acting Flange Pins
start welding in minutes with very little
fit-up time. Endless threading and
unthreading of flange pins are now
completely eliminated.
The secret is in the knob. Just tilt
the knob to bypass the flange pin
threads, then straighten the knob to
grip the threads for tight, positive
clamping. Removal is just as quick and
easy. Loosen the knob, tilt and remove.
These precise, conical flange pins
provide perfect centering on 5/8" to
1-1/2" bolt holes. Try a set of H&M
Quick-Acting Flange Pins and experience why they are a "hole" lot better.
Hand Tools
Here is one great tool that does the
work of 12 cage-type clamps. The
H&M APC-16 Adjustable Pipe
Clamp comes complete and ready
to align 2" - to 16" -diameter pipe.
Made of durable, ductile cast
iron, the H&M APC-16 features
convenient carrying handles and
precisely machined V’s for perfect
pipe alignment every time. At only
31 lbs. it is also lightweight and
easily portable to any job site. One
person can position the clamp and
start welding in about two minutes for most applications and pipe sizes.
Acme 3/4-6" threaded bolts and nuts tighten the pipe chain around the
pipe. Each adjusting nut is fitted with its own handle. No extra tools or
ratchet handles are needed. The Acme threaded bolts, nuts and chain are
captive to the pipe clamp, eliminating any lost or misplaced items.
19 -56
Standard
Pipe Clamp
Master Chain Clamp
PEPL-800
19
H&M offers General Pipe Clamps for 2" - to 60" -diameter pipe. Each is
hinged for easy positioning around the pipe an available with flat or arched
cross bars.
The Standard Pipe Clamp features a lever and a cam for tightening the
clamp around both ends of an adjoining pipe.
The hydraulic Pipe Clamp employs an eight-ton hydraulic jack for
opening and closing the clamp. This feature is especially important
when aligning 16" - to 60" -diameter pipe.
The Ratchet Clamp includes precision-cut Acme thread design for
strength and easy operation, plus an enclosed mechanism to prevent mud
& dirt contamination. This clamp works on 10" - to 60" diameter pipe.
WWW.HANESSUPPLY.COM
Albany/NE Division:
518.438.0139
Rochester Division:
585.235.0160
FAX:
FAX:
FAX:
716.826.4412
518.438.5343 CCISCO: 843.238.1338
585.235.0229
FAX: 843.238.8337
Hand Tools
Keson
®
Proline® Chalk Line Reels
Keson®
Innovative and Feature Packed Keson® Proline® High
Speed Chalk Line Reel
Specialty Tapes
Depth Gauge
Developed for seismo-graphic measuring. The numbers are graduated
from snap ring end hook upward to the strap handle. Simply attach a
lead or brass weight (not included) to the snap ring and you’re ready to
measure depth.
A combination of extruded fiberglass and polyvinyl chloride make a
very lightweight, tough, flexible rope that will withstand constant use in
mud, water and over abrasive terrain.
Surveyors Rope
Quality engineered fiberglass rope with the same characteristics of the
depth gauge. Makes an ideal drag chain for rough surveying measurements. The numbers are graduated from the strap handle upward to the
end of rope.
Model
No.
DG-50-18
DG-100-18
DG-200-18
Surveyors
SR-18-100
Rope 18 Series SR-18-200
SR-18-300
Surveyors
SR-10-100
Rope 10 Series SR-10-200
SR-10-300
Surveyors
SR-30M
Metric Rope
SR-50M
SR-60M
SR-100M
Description
Depth Gauge
Lgth.
(ft)
50
100
200
100
200
300
100
200
300
30 meters
50 meters
60 meters
100 meters
Depth
Gauge
Graduation
Inches & Feet
Inches & Feet
Inches & Feet
Inches & Feet
Inches & Feet
Inches & Feet
10ths of a Foot
10ths of a Foot
10ths of a Foot
Metric
Metric
Metric
Metric
Surveyors
Rope
Model RR-318N Graduated: Feet and inches
Model RR-310 Graduated: Feet and 10ths of a Foot
Model RR-3M Graduated: Metric & Decimeters
Ideal for long indoor runs such as plant floor plans or
outdoor measuring on firm surfaces. Large 1 meter
circumference (39.37”) is more accurate over rough
surfaces. The modern 3 spoke design wheel is not likely
to get caught when measuring in tall grass, unlike
wire spokes. Wheel is made of tough engineered
plastic and has a molded rubber tire. No need to
worry about corrosion. The unit adds in forward
motion and subtracts in backwards motion.
Counter features 5 digits and a reset button. The
sturdy telescoping aluminum handle adjusts to fit
the individual. Include: curved handle and molded
grip. Weight 3.6 lbs. Packed 1 per carton. Backed
by two-year warranty from date of purchase.
No.
No.
TeleMax.
Wheel Wheel
of
of
Reset Curved scoping Dist. w/o
Circum. Dia. Wheels Digits System Handle Handle Resetting
1 Ft. 3.75”
1
4
Quick
No
Yes
999.11
Reverse
Ft.
2 Ft.
Ideal for the homeowners, do-it-yourselfers and professionals. This lightweight, corrosion-free chalk line has a rugged poly/pro case that fits the
hand with ease. Comes with 100 Ft. of spun cotton/poly line with a metal
catch hook for one-person layout work. The line is self-chalking every time
you rewind. To fill the chalk line reel simply insert the pointed spout of the
chalk container into the slit in the rubber grommet and squeeze until chalk
line reel is full and remove spout. The grommet self-seals perfectly.
Keson Ultra-Fine® Marking Chalk
Roadrunner Measuring Wheels
7.5”
1
5
Knob
Yes
No
99,999
Ft.
39.37” 12.5”
1
5
Button
Yes
Yes
9,999.11
Ft.
39.37” 12.5”
1
5
Button
Yes
Yes
9,999.9
Ft.
39.37” 12.5”
1
5
Button
Yes
Yes
9,999.9
Meters
Ultra-Fine® Marking Chalk is formulated to Achieve Perfect Line
Every Time! Constant Color Tones.
Keson chalk is a blend of basic inert materials with
brilliant color oxides added to achieve the constant
color tones needed for strong, sharp lines.
Colors include: Red, White, Blue and Yellow as
well as Fluorescent Glo/Orange and Glo/Lime.
Fluorescent colors are ideal when there is limited
light available such as in new construction.
Keson Ultra-Fine Marking Chalk comes in
4 popular sizes including: 4 oz., 8 oz., 12 oz. and
5 lb. All size containers
Model
are functional squeeze
Color
Size
No.
bottles with color coordiRed
12 oz.
12R
nated condiment style
White 12 oz.
12W
caps. Simply insert the
Blue
12 oz.
12B
long spout into the chalk
Yellow 12 oz.
12Y
line reel receptacle and
Red
5 lb.
105R
squeeze the bottle with a
White
5 lb.
105W
gentle pumping action
Blue
5 lb.
105B
until reel is full.
Yellow 5 lb.
105Y
WWW.HANESSUPPLY.COM
19
Hand Tools
Description
Graduations
Compact
Executive Model
Ft/In
RR-218
Landscape
Measuring Wheel
Feet Only
RR-318N Professional Wheel
w/Telescoping
Handles - Ft/In
RR-310
Engineering
Feet &
10ths of a foot
RR-3M
Metric
Meters &
Decimeters
Keson Proline Quick Fill Chalk Line Reel
Description
Model No. Line Lgth. (ft)
High Speed Chalk Line Reel
GB-1
100
Quick Fill Chalk Line Reel
FB-2
100
®
Model
No.
RR-118
High speed-rapid rewind and a free-wheeling line out feature make the
Keson Model GB-1 the preferred chalk line of the professionals. It’s a real
time saver! The high-speed rewind is 3-1/2 times faster than that of conventional chalk line reels. Simply push the sturdy handle to the side and
the line is free-wheeling – without the handle spinning. Release the pressure and the line locks in place. There is also a line lock position for setting
a plumb line. All this is accomplished through
our exclusive gear/clutch design. The chalk
line reel has a corrosion free, chrome-plated,
scratch-free ABS case, which is lightweight
but exceedingly strong. Includes a quick fill
self-sealing rubber grommet for fast refilling
and 100 Ft. of spun cotton/poly line with a
metal catch hook.
19 -57
Albany/NE Division:
518.438.0139
Rochester Division:
585.235.0160
FAX:
FAX:
FAX:
716.826.4412
518.438.5343
585.235.0229
CCISCO: 843.238.1338
FAX:
843.238.8337
Hand Tools
Klein Tools
High-Leverage Side Cutters
Klein
An original Klein design, these pliers provide a 46% greater mechanical
advantage than regular 9 1/4-inch side cutters. Plastic-dipped handles.
Side-Cutting Pliers
Klein side-cutting pliers come in two styles: Standard duty, which has long
been recognized for their premium quality design and rugged, precision
construction; and the innovative Klein "2000 SERIES" with super-tough cutting knives, specially designed and heat treated to cut bolts, nails, ACSR,
and most hardened wire without damage. All "2000 SERIES" have combination polished and black-oxide finish.
* WARNING: Plastic-Dipped or slip-on plastic handles are NOT intended for protection
against electrical shock. This warning includes heavy-duty plastic-dipped handles.
NEVER use any pliers or cutters on live electrical circuits.
High-Leverage NE-Type Side Cutters
Our most popular side cutting pliers. Smooth, streamlined nose with knurled
jaws. High-leverage design provides 46% greater cutting and gripping power
than regular 8-1/2" and 9-1/4" side cutters. Blue plastic-dipped handles.
Overall Jaw
Jaw
Jaw Knife
Cat.
Lgth.
Lgth. Width Thkns. Lgth.
No.
(in)
(in)
(in)
(in)
(in)
D213-8NE
8-1/2 1-7/16 1-7/32 5/8
23/32
HD213-8NE With heavy-duty plastic-dipped handles.*
D213-9NE
9-1/4 1-19/32 1-5/16 5/8
25/32
213-9NE
With plain handles.
HD213-9NE With heavy-duty plastic-dipped handles.*
KLEIN 2000 SERIES:
D2000-9NE Same as D213-9NE except with ultra-durable
“2000 Series” cutting knives for ACSR, bolts, nails and
most hardened wire. Blue plastic-dipped handles.
HD2000-9NE Same as above except with heavy-duty
plastic-dipped handles.*
D213-9NE
Jaw
Lgth.
(in)
Jaw
Width
(in)
Jaw
Thkns.
(in)
Knife
Lgth.
(in)
9-1/4
1-19/32
1-5/16
5/8
25/32
High-Leverage NE-Type Side Cutters with
Bolt-Thread Holder
Same high-leverage design and mechanical cutting advantage as D2139NE pliers, but with 5/8-inch diameter, 11-thread opening at the hinge for
line work. Lets you hold threaded end of bolts without damaging threads,
clean and straighten threads, and remove or install pole hardware more
easily and safely. Plastic-dipped handles.
Overall Jaw
Jaw
Jaw Knife
Cat.
Lgth.
No.
(in)
(in)
(in)
(in)
(in)
D213-9NETH
9-1/4 1-19/32 1-5/16 5/8 25/32
HD213-9NETH With heavy-duty plastic-dipped handles.*
D213-9NETH
Square-Nose Side Cutters
The original Klein side-cutting pliers for general-purpose use. Squared
nose and knurled jaws. Plastic-dipped handles.
Cat.
No.
D201-8
D201-9
Overall Jaw
Lgth.
Lgth.
(in)
(in)
8-1/2 1-7/16
9-1/4 1-19/32
Jaw
Jaw
Width Thkns.
(in)
(in)
1-7/32
5/8
1-5/16
5/8
Knife
Lgth.
(in)
23/32
25/32
D201-8
Standard Side Cutters for Rebar Work
Smooth, streamlined design. Slides more easily in and
out of tool pouch. Plastic-dipped handles.
Specially designed and sharpened for cutting soft annealed tie wire used
on reinforcing rods. Special, heavy, knurled jaws. Hook bend in one handle
for non-slip grip. Coil spring holds jaws open. Plastic-dipped handles.
D201-8NE
High-Leverage NE-Type Side Cutters with Fish-Tape
Pulling Grip
Same as our popular D213-9NE pliers, but with a special groove at the
hinge for gripping and pulling flat fish tapes. Design provides a quick, sure
grip and minimizes pulling effort without damaging the fish tape. Plasticdipped handles.
Overall Jaw
Jaw
Jaw Knife
Cat.
Lgth. Lgth. Width Thkns. Lgth.
No.
(in)
(in)
(in)
(in)
(in)
D213-9NETP 9-1/4 1-19/32 1-5/16
5/8 25/32
KLEIN 2000 SERIES:
D2000-9NETP Same as D213-9NEPT except with ultradurable “2000 Series” cutting knives for ACSR, bolts,
nails and most hardened wire.
Hand Tools
D213-9
Overall
Lgth.
(in)
Standard NE-Type Side Cutters
Overall Jaw
Jaw
Jaw Knife
Cat.
Lgth.
No.
(in)
(in)
(in)
(in)
(in)
D201-6NE
6-1/4 1-3/32 29/32
1/2
9/16
D201-7NE
7-5/16 1-9/32 1-5/32
1/2
5/8
D201-8NE
8-1/2 1-7/16 1-7/32
5/8 23/32
HD201-8NE With heavy-duty plastic-dipped handles.
D201-9NE
9-1/4 1-19/32 1-5/16
5/8 25/32
19
Cat.
No.
D213-9NETP
Overall Jaw
Jaw
Jaw Knife
Cat.
No.
(in)
(in)
(in)
(in)
(in)
D201-7CST 8-3/4 1-9/32 1-5/32
1/2
5/8
201-7CST With plain handles.
D2000-7CST Same as D201-7CST except with ultradurable “2000 Series” cutting knives for ACSR, bolts,
nails and most hardened wire. Plastic-dipped handles.
D201-7CST
High-Leverage Side Cutters for Rebar Work
High-leverage design for easier cutting of soft annealed tie wire. Provides
a 46% greater mechanical cutting and gripping advantage than other pliers
of this type. Knurled jaws. Hook bend in one handle for non-slip grip. With
coil spring. Plastic-dipped handles.
Overall Jaw
Jaw
Jaw Knife
Cat.
No.
(in)
(in)
(in)
(in)
(in)
D213-9ST
9-9/32 1-7/16 1-7/32
5/8 23/32
213-9ST
With plain handles.
KLEIN 200 SERIES
D2000-9ST Same as D213-9ST except with ultradurable “2000 Series” cutting knives for ACSR, bolts,
nails and most hardened wire. Plastic-dipped handles.
D213-9ST
High-Leverage NE-Type Side Cutters with Crimping Die
Same high-leverage design and mechanical cutting advantage as D2139NE pliers, but with crimping die at the hinge for crimping sleeve connectors. Plastic-dipped handles.
Overall Jaw
Jaw
Jaw Knife
Cat.
No.
(in)
(in)
(in)
(in)
(in)
D213-9NE-CR 9-1/4 1-19/32 1-5/16
5/8 25/32
KLEIN 2000 SERIES:
D2000-9NE-CR Same as D213-9NE-CR except with
ultra-durable “2000 Series” cutting knives for ACSR,
bolts, nails and most hardened wire.
19 -58
D213-9NE-CR
High-Leverage End-Cutting Pliers
For cutting wire or nails close to the work. With wide throat clearance,
ample handle leverage and jaws at just the right angle for easy cutting.
Makes a clean, even cut. Plastic-dipped handles.
Overall Jaw
Jaw
Jaw Knife
Cat.
No.
(in)
(in)
(in)
(in)
(in)
D232-8
8-1/2
7/16
1-5/8
1/2 1-3/16
KLEIN 200 SERIES:
D2000-32 Same as D232-8 except with ultra-durable
“2000 Series” cutting knives for ACSR, bolts, nails and
most hardened wire. Plastic-dipped handles.
WWW.HANESSUPPLY.COM
D232-8
Albany/NE Division:
518.438.0139
Rochester Division:
585.235.0160
FAX:
FAX:
FAX:
716.826.4412
518.438.5343 CCISCO: 843.238.1338
585.235.0229
FAX: 843.238.8337
Hand Tools
Klein Tools
Diagonal-Cutting Pliers
Heavy-Duty Diagonal Cutters with Tapered Nose
Klein diagonal-cutting pliers come in two styles: Standard duty, which has
long been recognized for their premium quality design and rugged, precision construction; and the innovative Klein “2000 SERIES” with supertough cutting knives, specially designed and heat treated to cut bolts,
nails, ACSR and most hardened wire without damage. All “2000 SERIES”
have combination polished and black-oxide finish.
Heavier design for all-purpose use. Tapered nose and standard-bevel
cutting knives. Plastic-dipped handles.
Warning: Plastic-Dipped or slip-on plastic handles are not intended for protection
against electrical shock.
NEVER use any pliers or cutters on live electrical circuits.
Note: Dimensions for pliers shown are accurate w/i accepted commercial tolerances,
which allow slight variations that normally result from forging & grinding operations.
High-Leverage Diagonal Cutters
High-leverage design provides a 36% greater mechanical cutting and gripping advantage than regular 7” and 8” heavy-duty diagonal cutters.
Standard-bevel cutting knives. Plastic-dipped handles–hand form style on
No. D228-8, curved style on No. D228-7.
D228-8
High-leverage, heavy-duty with head angled for easier work in confined
areas. Standard-bevel cutting knives. Plastic-dipped handles.
D248-8
High-Leverage, Diagonal Cutters with Skinning Holes
High-leverage, heavy-duty with two skinning holes for 12 and 14-gauge
wire. Standard-bevel cutting knives. Plastic-dipped handles.
Tapered nose and standard-bevel cutting knives with .052” skinning
hole for 16 AWG wire. Plastic-dipped handles.
Cat.
No.
D240-6
Jaw
Jaw
Jaw
Lgth. Width Thkns.
(in)
(in)
(in)
13/16 1-3/16 7/16
D243-8
Tapered nose and standard-bevel cutting knives. One-inch jaws reach into
confined spaces. Plastic-dipped handles.
Jaw
Jaw
Jaw
Lgth. Width Thkns.
(in)
(in)
(in)
1
31/32
1/2
D220-7
Semi-flush cut. For plastic trimming or printed circuit board work.
With coil spring. Plastic-dipped handles.
Cat.
No.
D202-5SW
D252-6SW
Jaw
Thkns.
(in)
7/16
7/16
D210-5C
Standard Diagonal Cutters with Tapered Nose
Tapered nose and standard-bevel cutting knives. Available
with or without coil spring. Plastic-dipped handles.
Overall Jaw
Cat.
Lgth.
Lgth.
No.
(in)
(in)
D202-5
5-1/2 13/16
D202-5C With coil spring.
D202-6
6-1/16 13/16
Jaw
Width
(in)
11/16
Jaw
Thkns.
(in)
7/16
D202-6
11/16
7/16
Overall Jaw
Jaw
Jaw
Lgth. Lgth. Width Thkns.
(in)
(in)
(in)
(in)
5-1/2 13/16 11/16
7/16
6
13/16
3/4
7/16
D252-6SW
Designed for work on switchboards. Tapered nose and standard-bevel
cutting knives. With “W” notches in nose to slit insulation and “V” notch
at hinge to crush insulation. Red plastic-dipped handles.
Overall
Lgth.
(in)
5
Jaw
Jaw
Jaw
Lgth. Width Thkns.
(in)
(in)
(in)
5/8
9/16
3/8
Midget Standard-Nose Diagonal Cutters
General-purpose cutter with short, strong, tapered nose. Knives are semiflush cutting. With or without coil spring. Plastic-dipped handles.
Overall Jaw
Jaw
Jaw
Cat.
Lgth.
Lgth. Width Thkns.
No.
(in)
(in)
(in)
(in)
D257-4
4-3/16
1/2
7/16
1/4
D257-4
Midget Pointed-Nose Diagonal Cutters
Sharp nose for working in confined areas. Widely used for
trimming printed circuit boards. Specifically designed for
tip cutting. Semi-flush cutting knives. With coil spring.
Plastic-dipped handles.
Cat.
No.
D209-4C
D209-5C
Overall Jaw
Jaw
Jaw
(in)
(in)
(in)
(in)
4-3/16 1/2
7/16
1/4
5
11/16 9/16
3/8
D209-5C
This is the basic Klein diagonal-cutting pliers with tapered nose and
standard-bevel cutting knives. Available with or without coil spring to
hold jaws open. Red plastic-dipped handles.
Cat.
No.
D245-5
D245-5C
Overall Jaw
Lgth. Lgth.
(in)
(in)
5
11/16
With coil spring.
Jaw
Jaw
Width Thkns.
(in)
(in)
9/16
3/8
19
D245-5
Hand Tools
Jaw
Jaw
Lgth. Width
(in)
(in)
13/16 11/16
13/16 11/16
Jaw
Jaw
Jaw
Lgth. Width Thkns.
(in)
(in)
(in)
13/16 11/16 7/16
Midget Standard Diagonal Cutters with Tapered Nose
Standard-Nose Diagonal Cutters
Overall
Cat.
Lgth.
No.
(in)
D210-5C 5-1/2
D210-6C 6-1/16
Overall
Lgth.
(in)
6-1/16
Diagonal Cutters with Skinning Hole
Heavy-Duty Diagonal Cutters with Tapered Nose
Overall
Lgth.
(in)
7-11/16
D252-6
Standard Diagonal Cutters with Skinning Hole
Cat.
No.
D528V
Overall
Jaw
Jaw
Jaw
Cat.
Lgth.
Lgth.
Width
Thkns.
No.
(in)
(in)
(in)
(in)
D248-8
8
13/16
1-3/16
7/16
D238-8 Same as D248-8, but w/semi flush cutting
knives for Cherry Burrell rivets. Not for hard
wire. For use on non-ferrous wire only.
D2000-48 Same as D248-8 except w/ ultra-durable
“2000 Series” cutting knives for ACSR,
bolts, nails & most hardened wire.
Cat.
No.
D220-7
Jaw
Jaw
Jaw
Lgth. Width Thkns.
(in)
(in)
(in)
13/16 3/4
7/16
Diagonal Cutters with “V” and “W” Notches
High-Leverage, Diagonal Cutters with Angled Head
Overall
Lgth.
(in)
8
Overall
Lgth.
(in)
6
Tapered nose and standard-bevel cutting knives. With “W” stripping notches and .052” skinning hole. Comfortable red plastic-dipped handles.
Overall
Jaw
Jaw
Jaw
Cat.
Lgth.
Lgth.
Width
Thkns.
No.
(in)
(in)
(in)
(in)
D228-8
8
13/16
1-3/16
7/16
D228-7 Same as D228-8 except length is 7"
w/curved handles.
KLEIN 2000 SERIES:
D2000-28 Same as D228-8 except w/ ultra-durable
“2000 Series” cutting knives for ACSR, bolts, nails
& most hardened wire. Plastic-dipped handles.
Cat.
No.
D243-8
Cat.
No.
D252-6
Midget Slim Pointed-Nose Diagonal Cutters
Similar in design to semi-flush cutting D209 series pliers,
but relieved in the back to permit entry into confined areas.
Specifically designed for tip cutting. With coil spring.
Overall
Jaw
Jaw
Jaw
Cat.
Lgth.
Lgth.
Width Thkns.
No.
(in)
(in)
(in)
(in)
D219-4C
4-3/16
1/2
7/16
1/4
FCD219-4C Same as D219-4C except full flush cutting.
D219-5C
5
5/8
9/16
3/8
WWW.HANESSUPPLY.COM
D219-4C
19 -59
Albany/NE Division:
518.438.0139
Rochester Division:
585.235.0160
FAX:
FAX:
FAX:
716.826.4412
518.438.5343
585.235.0229
CCISCO: 843.238.1338
FAX:
843.238.8337
Hand Tools
Klein Tools
Standard Long-Nose with Side Cutters
with Extra-Narrow Jaw
Standard long-nose design with cutting knives at hinge. Permits wrapping,
looping and cutting with a single pliers. Available with or without coil
spring. Plastic-dipped handles.
Full flush-cutting diagonal cutters with fine, narrow jaw
taper and narrow hinge for especially delicate work.
Fully polished head and neck. With coil spring.
Cat.
No.
D259-4C
Overall
Lgth.
(in)
4-3/16
Jaw
Jaw
Jaw
Lgth. Width Thkns.
(in)
(in)
(in)
1/2 13/32
1/4
Midget Tapered-Nose Diagonal Cutters
with Midget Jaw
Our smallest diagonal cutter, designed for full-flush cutting in
very close quarters with maximum visibility. Fullypolished head and neck. With coil spring.
Comfortable plastic-dipped handles.
Cat.
No.
D295-4C
Overall
Lgth.
(in)
4-3/16
Jaw
Jaw
Jaw
Lgth. Width Thkns.
(in)
(in)
(in)
11/16 1/2
5/16
Jaw
Jaw
Jaw
Lgth. Width Thkns.
(in)
(in)
(in)
1/2
1/2
7/16
Overall Jaw Jaw
Jaw Knife Point
Lgth. Lgth. Width Thkns. Lgth. Thkns.
(in)
(in)
(in)
(in) (in)
(in)
4-5/8 15/16 7/16
1/4
1/8
1/8
With Skinning hole for No. 12 AWG
insulated wire and crimping die for connectors,
lugs & terminals. Comfortable plastic-dipped handles.
The basic Klein long-nose pliers. Available with or without coil spring.
Knurled jaws, yellow plastic-dipped handles.
Hand Tools
Overall Jaw
Jaw Jaw Knife Point
(in)
(in)
(in)
(in) (in)
(in)
6-5/8 1-15/16 11/16 3/8
1/2 3/32
Heavy-Duty Long-Nose with Side Cutters,
Skinning Hole and Crimping Die
Long-Nose Pliers
Point
Thkns.
(in)
3/32
D301-6
3/32
3/32
Long-Reach Long-Nose with Rounded-Nose
Longer handles for more convenient use and greater jaw gripping power.
Knurled jaws. Plastic-dipped handles.
Overall Jaw
Jaw
Jaw Point
Lgth.
Lgth. Width Thkns. Thkns.
(in)
(in)
(in)
(in)
(in)
8
1-15/16 11/16 3/8
3/32
Flat-Nose Duck Bill
Same as D301-6 pliers, but w/ 1/16" diameter point. Plastic-dipped handles.
Overall Jaw
Jaw
Jaw Point
Lgth.
(in)
(in)
(in)
(in)
(in)
6-5/8 1-15/16 11/16 3/8
1/16
Overall Jaw
Jaw
Jaw Knife Point
Cat.
No.
(in)
(in)
(in)
(in) (in)
(in)
D203-8NCR 8-5/8 2-5/16
1
1/2
5/8
1/8
Cat.
No.
D314-8
Standard Long-Nose with Mini-Point
19 -60
Cat.
No.
D203-6CR
Overall Jaw Jaw
Jaw Knife Point
Cat.
No.
(in)
(in)
(in)
(in)
(in)
(in)
D203-8N 8-5/16 2-5/16 1
1/2
5/8
1/8
Standard Long-Nose
Cat.
No.
D303-6
Long-nose pliers with crimping die for
TelSplice connectors. Knurled jaws.
With skinning hole for No.12 AWG
insulated wire. Plastic-dipped handles.
Semi-flush cutting knives at tip. Ample 5/8" jaw slot for
wire end. Pliers may be extended vertically into work.
19
Overall Jaw
Jaw Jaw Knife Point
(in)
(in)
(in)
(in) (in)
(in)
8-5/16 2-5/16
1
1/2
5/8
1/8
Heavy-Duty Long-Nose with Side
Cutters and Skinning Hole
Midget Transverse End Cutters
Overall Jaw
Jaw
Jaw
Cat.
Lgth.
Lgth. Width Thkns.
No.
(in)
(in)
(in)
(in)
D301-5
5-9/16 1-9/16 11/16 3/8
D301-5C With coil spring and 1/16" point.
D301-6
6-5/8 1-15/16 11/16 3/8
D301-7
7-1/8 2-7/16 11/16 3/8
Heavier design long-nose pliers for easier, more
comfortable cutting. Plastic-dipped handles.
Heavy-Duty Long-Nose with Side Cutters Crimping Die
Designed for cutting nickel ribbon wire. Diagonal-cutting knives hardened
to Rockwell C60–as hard as to file. Nose only 1/16" at tip for use in
confined spaces. Semi-flush knives are hand honed under a
magnifier. Cutting knife at tip is 3/16" long. Fully-polished
head & neck. With coil spring and high-gloss finish.
Cat.
No.
D224-4-1/2C
Overall Jaw
Jaw Jaw Knife Point
(in)
(in)
(in)
(in) (in)
(in)
6-5/8 1-15/16 11/16 3/8
1/2 3/32
Heavy-Duty Long-Nose with Side Cutters
Cat.
No.
D203-8
with High-Hardness Blades
Overall
Lgth.
(in)
4-3/16
D203-6
Standard Long-Nose with Side Cutters
and Stripping Holes
Cat.
No.
D203-6H2
Narrow jaw & narrow hinge diagonal cutter. Reaches into
confined areas to permit full-flush cutting. Fully-polished head
and neck. With coil spring. Plastic-dipped handles.
Cat.
No.
D230-4C
Overall Jaw
Jaw
Jaw Knife Point
Lgth.
Lgth. Width Thkns. Lgth. Thkns.
(in)
(in)
(in)
(in)
(in)
(in)
5-9/16 1-9/16 11/16 3/8
1/2
3/32
With 1/16" point and coil spring.
6-5/8 1-15/16 11/16 3/8
1/2
3/32
With plain handles.
7-1/8 2-7/16 11/16 3/8
1/2
3/32
Designed for telephone switchboard work.
Similar to 203 series but with two stripping
holes at hinge for stripping 19 and 22 gauge wire. Plastic-dipped handles.
Jaw
Jaw
Jaw
Lgth. Width Thkns.
(in)
(in)
(in)
1/2
3/8
1/4
with Narrow Jaw
Overall
Cat.
Lgth.
No.
(in)
D244-5C
5
Cat.
No.
D203-5
D203-5C
D203-6
D203-6C
203-6
D203-7
D203-7C
Flat-nose design with inside jaws knurled.
Cat.
No.
D305-6
Overall Jaw
Lgth.
Lgth.
(in)
(in)
6-1/2 2-5/16
WWW.HANESSUPPLY.COM
Jaw
Jaw Point
Width Thkns. Thkns.
(in)
(in)
(in)
11/16 3/8
5/16
Albany/NE Division:
518.438.0139
Rochester Division:
585.235.0160
FAX:
FAX:
FAX:
716.826.4412
518.438.5343
585.235.0229
CCISCO: 843.238.1338
FAX:
843.238.8337
Hand Tools
Klein Tools
Rounded-Nose Duck Bill
Rounded tip and wide, flat gripping surface. Inside jaws are smooth.
Cat.
No.
D304-6
Overall Jaw
Lgth.
Lgth.
(in)
(in)
6-1/2 2-5/16
Jaw
Jaw Point
Width Thkns. Thkns.
(in)
(in)
(in)
11/16 3/8
3/8
Longer handles for more convenient use and greater jaw gripping power.
Knurled jaws. Plastic-dipped handles.
Jaw
Lgth.
(in)
1-9/16
Jaw
Jaw Knife Point
Width Thkns. Lgth. Thkns.
(in)
(in)
(in)
(in)
17/32 5/16 7/16 1/32
Curved Long-Nose
Nose curved to approximately 70-degree angle for working around
obstructions and in hard-to-reach spaces. Provides full view of work
area. Knurled jaws. Plastic-dipped handles.
Jaw
Jaw
Point
Width Thkns.
Thkns.
(in)
(in)
(in)
11/16 3/8 3/32 x 9/32
Cat.
No.
D302-6
Midget Slim-Nose
Our smallest, lightest slim-nose pliers. Designed for precision
subminiature assembly work. Knurled jaws. With or
without coil spring. Plastic-dipped handles.
D321-4-1/2
Overall Jaw
Jaw
Jaw Point
Lgth. Lgth. Width Thkns. Thkns.
(in)
(in)
(in)
(in)
(in)
6-1/4 1-1/2 11/16
3/8
3/32
Tapered Long-Nose
Larger and sturdier, yet shaped for efficient entry into confined areas.
Knurled jaws. With coil spring. Comfortable plastic-dipped handles.
Overall Jaw
Jaw
Jaw
Point
Cat.
Lgth.
No.
(in)
(in)
(in)
(in)
(in)
D321-4-1/2
4-3/4 1-1/16 7/16
1/4 1/32 x 1/16
D321-4-1/2C With coil spring.
Cat.
No.
D310-6C
Midget Slim-Nose with Smooth Jaws
Similar to No. D321-4-1/2C but with smooth inside jaws &
radiused jaw edges to prevent nicking wire.
Overall Jaw
Cat.
Lgth.
Lgth.
No.
(in)
(in)
D322-4-1/2C 4-3/4 1-1/16
Needle tip only 1/32" in diameter for precise assembly work.
Side cutters permit bending, forming and
cutting with a single plier. Knurled jaws.
Overall Jaw
Cat.
Lgth. Lgth.
No.
(in)
(in)
D221-5-1/2C 5-9/16 1-3/4
Long-Reach Long-Nose with Flat Nose
Overall
Cat.
Lgth.
No.
(in)
D315-8
8
Slim Long-Nose with Side Cutters
Overall Jaw
Lgth. Lgth.
(in)
(in)
6-5/8 1-15/16
Long Needle-Nose
For accurate assembly work in hard-to-reach areas. Affords maximum
visibility. Knurled jaws. With coil spring. Plastic-dipped handles.
Overall
Cat.
Lgth.
No.
(in)
D318-5-1/2C 5-13/32
Jaw
Jaw
Point
Width Thkns.
Thkns.
(in)
(in)
(in)
7/16
1/4 1/32 x 1/16
Jaw
Jaw Point
Width Thkns. Thkns.
(in)
(in)
(in)
11/16 3/8
1/16
Jaw
Jaw
Jaw Point
(in)
(in)
(in)
(in)
1-3/4
1/2
5/16 1/16
Midget Pliers with Curved Needle-Nose
Long Needle-Nose with Smooth Jaws
Designed to bend and form fine wire. Extra slim nose for delicate work in
narrow spaces. 60-degree bend at nose permits easy access to
work and full visibility. Polished inside jaws and radiused jaw
edges to prevent nicking wire. With coil spring. Fully
polished head and neck. Plastic-dipped handles.
Similar to D318-5-1/2C,but with smooth inside jaws and radiused jaw
edges to prevent nicking wire. With coil spring. Plastic-dipped handles.
Overall
Cat.
Lgth.
No.
(in)
D320-4-1/2C 4-5/8
Jaw
Lgth.
(in)
7/8
Jaw
Jaw
Point
Width Thkns. Thkns.
(in)
(in)
(in)
13/32 1/4
1/16
Jaw
Lgth.
(in)
1-3/4
Jaw
Jaw Point
Width Thkns. Thkns.
(in)
(in)
(in)
1/2
5/16 1/16
Extra-Slim Needle-Nose
Long, narrow nose and slim hinge for efficient use in extremely close
quarters. Finely knurled jaws grip thin wire without damaging it.
Midget Flat Long-Nose
Jaw width tapers down to narrow flat tip.
Polished inside jaws. With coil spring.
Overall Jaw
Cat.
Lgth.
Lgth.
No.
(in)
(in)
D323-4-1/2C 4-3/4 1-1/16
Overall
Cat.
Lgth.
No.
(in)
D328-5-1/2C 5-13/32
Jaw
Jaw
Point
Width Thkns. Thkns.
(in)
(in)
(in)
7/16
1/4 1/8 x 1/16
Overall Jaw
Jaw
Jaw Point
Cat.
Lgth.
No.
(in)
(in)
(in)
(in)
(in)
D335-5-1/2C 5-1/2 1-23/32 15/32 1/4
1/16
Fatigue-Reducing Needle-Nose
Slim Long-Nose
Longer nose and handles for deeper reach
into work. Knurled jaws. With coil spring.
Jaw
Lgth.
(in)
1-3/4
Jaw
Jaw
Width Thkns.
(in)
(in)
17/32 5/16
Point
Thkns.
(in)
1/16
Cat.
No.
D366-6C
Overall
Lgth.
(in)
7-1/2
2
11/16
3/8
1/16
Slim Long-Nose with Smooth Jaws
Curved Needle-Nose
Similar to D307-5-1/2C, but with smooth
inside jaws and radiused jaw edges to
prevent nicking wire. With coil spring.
60-degree bend at nose for maximum work visibility, especially
in confined areas. Polished inside jaws and radiused jaw
edges to prevent nicking wire. With coil spring.
Overall
Lgth.
(in)
Jaw
Lgth.
(in)
Jaw
Jaw
Point
Width Thkns. Thkns.
(in)
(in)
(in)
Cat.
No.
D327-5-1/2C 5-9/16
1-3/4
17/32
D338-5-1/2C
Cat.
No.
5/16
1/16
Overall
Lgth.
(in)
Jaw
Lgth.
(in)
5-1/2
1-1/4
WWW.HANESSUPPLY.COM
19
Jaw
Jaw
Jaw Point
(in)
(in)
(in)
(in)
Hand Tools
Overall
Cat.
Lgth.
No.
(in)
D307-5-1/2C 5-9/16
A special Klein design minimizes
bending of wrist, reduces strain and
fatigue. Knurled jaws with rounded edges, coil
spring, comfortable foam plastic-covered handles.
Jaw
Jaw Point
Width Thkns. Thkns.
(in)
(in)
(in)
1/2
5/16
1/16
19 -61
Albany/NE Division:
518.438.0139
Rochester Division:
585.235.0160
FAX:
FAX:
FAX:
716.826.4412
518.438.5343
585.235.0229
CCISCO: 843.238.1338
FAX:
843.238.8337
Hand Tools
Klein Tools
Types L1 & L2 Long-Nose
Needle-Nose with Side Cutters
Both pliers have knurled jaws at tip, side cutters, .030" skinning hole and
yellow plastic-dipped handles. Type L2 also has nose surface coating of
aluminum-oxide dielectric material.
Unique design combines length and feel of
regular long-nose pliers with 1-1/8" needle
nose for easy reach into tight places. Knurled
jaws. With coil spring. With side-cutting
knives. Comfortable plastic-dipped handles.
Cat.
No.
D203-6SCPC
71980
Overall Jaw
Jaw
Jaw Knife Point
Lgth.
Lgth. Width Thkns. Lgth. Thkns.
(in)
(in)
(in)
(in)
(in)
(in)
6-5/8 1-15/16 11/16 3/8
1/2
1/16
Cat.
No.
71980
71982
Long-Nose with Narrow Tip and Cutter
Jaws knurled at tip. Single-cutting knife
just behind point. With coil spring.
Cat.
No.
D317-6PC
Overall Jaw
Lgth. Lgth.
(in)
(in)
6
1-1/4
3/8
5/16
1/16
D306-5-1/2C 5-19/32 1-3/4
Cat.
No.
72192
72194
Jaw
Jaw Point
Width Thkns. Thkns.
(in)
(in)
(in)
17/32
5/16
Jaw
Width
11/16"
18mm
72192
Jaw width tapers to narrow, rounded tip. Concave jaws reach easily
into tight places. Inside jaws are polished. With coil spring.
Overall Jaw
Lgth. Lgth.
(in)
(in)
Jaw
Lgth.
1-7/8"
48mm
Jaw
Thkns.
3/8"
10mm
Knife
Lgth.
1/2"
13mm
Point
Thkns.
3/32" x 1/16"
2 x 1.6 mm
Tapered nose diagonal-cutting pliers with standard-bevel knives. Both
styles have .030" and .045" skinning holes, serrated behind hinge and
red plastic-dipped handles. Types D-6 also has “V” stripping notch. Type
E-6 has nose surface coating of aluminum-oxide dielectric material.
Long-Nose with Concave Outside Jaws
Cat.
No.
Overall
Lgth.
6-9/16"
167mm
Types D-6 and E-6 Diagonal Cutters
Jaw
Jaw Knife Point
Width Thkns. Lgth. Thkns.
(in)
(in)
(in)
(in)
11/16
Bell System
Type
L1 Long Nose
L2 Long Nose
71982
Bell System
Type
D-6 diagonal
E-6 Diagonal
72194
Overall
Lgth.
6"
152mm
Jaw
Lgth.
13/16"
21mm
Jaw
Width
3/4"
19mm
Jaw
Thkns.
7/16"
11mm
Types D & E Long-Nose
Both pliers have knurled jaws, nose surface coating of aluminum-oxide
dielectric material and orange plastic-dipped handles. Type E also has
pressing groove near hinge for brass sleeves.
1/8
Heavy-Duty Short-Nose
Short, strong, knurled jaws for bending and forming
medium-gauge wire. Coil spring. Plastic-dipped handles.
Cat.
No.
D317-5C
Overall
Lgth.
(in)
5-1/4
Jaw
Lgth.
(in)
1-1/8
71974
Jaw
Jaw Point
Width Thkns. Thkns.
(in)
(in)
(in)
1/2
5/16 1/16
Cat.
No.
71974
71967
Bell System
Type
D Long Nose
E Long Nose
Overall
Lgth.
6-5/8"
168mm
71967
Jaw
Lgth.
1-15/16"
49mm
Jaw
Width
11/16"
17mm
Jaw
Thkns.
3/8"
10mm
Point
Thkns.
3/32"
2mm
Type C Short-Nose
Skins 22 or 24-gauge wire. Has slot in nose for crushing insulation, nose
surface coating of aluminum-oxide dielectric material, orange plasticdipped handles.
Telephone/Bell-System Pliers
Bell-System Pliers Selection Chart
Bell-System
Designation
Type B Long-Nose
Type C Long-Nose
Type D Long-Nose
Type E Long-Nose
Type G Long-Nose
List 1 Long-Nose
List 2 Long-Nose
Type B Short-Nose
Type C Short-Nose
Current
Cat. No.
D301-6 *
71972
71974
71976
71978
71980
71982
D2291 *
71990
* Yellow rather than orange handles.
Former
Cat. No.
71970
–––
–––
–––
–––
–––
–––
71988
–––
Bell-System
Designation
Diagonal B-5
Diagonal B V-Notch
Diagonal C V-Notch
Diagonal D-6
Diagonal E-6
8" B Sidecut
9" B Sidecut
C Pressing
Current
Cat. No.
D245-5
D528V
72198
72192
72194
D213-8NE †
D213-9NE †
D234-6
Former
Cat. No.
72190
72196
–––
–––
–––
70196
70198
74298
† Blue rather than red handles.
Connector-Crimping Pliers with Side Cutters
Hand Tools
Cat.
No.
D234-6
D234-6C
Overall
Jaw
Jaw
Jaw
Lgth.
Lgth. Width Thkns.
(in)
(in)
(in)
(in)
6
1-3/32 11/16 3/8
With coil spring.
19 -62
Jaw
Jaw
Jaw Point
(in)
(in)
(in)
(in)
1-1/4 11/16
3/8
1/16
Type C Long-Nose
Has knurled jaws at tip and pressing groove near hinge for brass sleeves.
Orange plastic-dipped handles
Cat.
No.
71972
Overall Jaw
Jaw
Jaw Point
(in)
(in)
(in)
(in)
(in)
6-5/8 1-15/16 11/16 3/8
3/32
Cat.
No.
71978
Overall Jaw
Jaw
Jaw Point
(in)
(in)
(in)
(in)
(in)
6-5/8 1-15/16 11/16 3/8
3/32
Type CV Notch Diagonal Cutters
Special pliers for telephone work, designed to skin 22 or
24 gauge wire. Slot provided in nose to crush
insulation. Yellow plastic-dipped handles.
Overall
Lgth.
(in)
6
Jaw
Jaw Point
Width Thkns. Thkns.
(in)
(in)
(in)
11/16 3/8
1/16
For closing 700, 701 and 702 type connectors. Has knurled jaws at
tip, pick on inside of one handle for breaking out the side wall of wire
connectors and orange plastic-dipped handles.
D234-6
Long-Nose Insulation Skinner
Cat.
No.
D2291
Overall Jaw
Lgth. Lgth.
(in)
(in)
6
1-1/4
Type G Long-Nose
Designed to seat UG, UR and UY connectors. Stop behind cutout
prevents damage to connectors. With or without coil spring. Yellow
plastic-dipped handles.
19
Cat.
No.
71990
D2291
Tapered-nose diagonal-cutting pliers with standard-bevel cutting knives,
for work on switchboards. Has “V” notch at hinge to crush insulation,
nose surface coating of aluminum-oxide dielectric material
and red plastic-dipped handles.
Cat.
No.
72198
Overall Jaw
Lgth. Lgth.
(in)
(in)
5
5/8
WWW.HANESSUPPLY.COM
Jaw
Jaw
Width Thkns.
(in)
(in)
9/16
3/8
Albany/NE Division:
518.438.0139
Rochester Division:
585.235.0160
FAX:
FAX:
FAX:
716.826.4412
518.438.5343
585.235.0229
CCISCO: 843.238.1338
FAX:
843.238.8337
Hand Tools
Klein Tools
Internal Snap-Ring Pliers
Special-Purpose Pliers
Long-Nose Insulation Skinner
Special pliers designed to skin and cut 24 gauge wire, especially useful
for telephone work. Slot behind cutting blade is provided to crush
insulation. Comfortable plastic-dipped handles.
Cat.
No.
D317-5P
Overall
Lgth.
(in)
5
Jaw
Lgth.
(in)
7/8
Jaw
Jaw Point
Width Thkns. Thkns.
(in)
(in)
(in)
1/2
5/16
1/32
Cat.
Tip Size &
No.
Angle (in)
DELUXE STYLE:
73242 .038" Straight
73243
.038" 45O
73244
.038" 90O
FIELD STYLE
Specially designed for extracting lamps from switchboards.
Comfortable plastic-dipped handles.
Overall
Lgth.
(in)
5-1/4
Jaw
Lgth.
(in)
1-1/4
Jaw
Jaw Point
Width Thkns. Thkns.
(in)
(in)
(in)
1/2
5/16
1/32
Plastic-Cutting Pliers
Flush diagonal-cutting knives for clean, precise cutting of injection mold
sprues, gates and other plastic. Screw adjustment with 1/16"
hollow-head screw keeps knife edges from damaging
each other. Not designed for use on metal. With
coil spring, plastic-dipped handles.
Overall Jaw
Jaw
Jaw
Cat.
No.
(in)
(in)
(in)
(in)
D227-6C 6-1/16 3/4
3/4
7/16
D227-7C 7-11/16
1
31/32 1/2
D227-7C
Conduit Locknut and Reaming Pliers
This versatile new tool tightens conduit locknuts, fittings and caps. It also
reams both the inside and outside of conduit. The special long-nose jaw
design makes tightening locknuts faster and easier on electrical outlet
boxes and in hard-to-reach areas where conduit fittings are used. The tool
tightens conduit-fitting locknuts on 1/2" and 3/4" EMT thin-wall and rigidwall conduit. It also tightens 3/8", 1/2" and 3/4" liquidtight conduit fittings.
In addition, the tool handles conduit-fitting bodies and caps on 1/2" EMT
and rigid conduit fittings, as well as 3/8" and 1/2" liquidtight fittings.
To protect wire and permit correct installation of fittings, this tool quickly
reams and smooths the inside of EMT thin wall or rigid conduit in sizes
up to 3/4". It also reams the outside of EMT thin wall up to 3/4" and rigid
conduit up to 1/2”.
The knurled jaws at the nose tip are used for pulling wire or fish tape.
The tool is made of high-quality, drop-forged tempered steel that is heattreated for maximum strength, and has a combination polished and black
finish. Plastic-dipped handles provide extra comfort.
Cat.
No.
D333-8
Housing
I.D. (in)
Overall
Lgth. (in)
.375 to 1.0"
.375 to 1.0"
.375 to 1.0"
5-9/16
5-3/8
5-1/4
.375 to 1.0"
5-9/16
73237
External Snap-Ring Pliers
Lamp-Cap Extractor
Cat.
No.
D319B
Cat.
Tip Size &
No.
Angle (in)
DELUXE STYLE:
73238
.038" 45O
73239
.038" 90O
FIELD STYLE:
Overall Jaw Jaw Jaw Point
(in)
(in)
(in)
(in)
(in)
7-3/4 1-5/8 15/16 1/2
3/16
Snap-Ring Pliers
Overall
Lgth. (in)
1/4 to 7/8
1/4 to 7/8
1/4 to 7/8
5-11/16"
5-5/8"
5-1/2"
1/4 to 7/8
5-11/16"
73242
Interchangeable-Tip Snap-Ring Pliers
Deluxe style snap-ring pliers have two each of four interchangeable tips:
.038"/90-degrees, .047"/straight, .047/45-degrees, and .067"/straight tips.
Overall pliers length: 6-1/4". Plastic grips. Spring-loaded handles.
73247 Set contains one internal and one external
pliers with four sets of tips.
73248 Set contains one internal pliers with four
sets of tips.
73249 Set contains one external pliers with four
sets of tips.
73250 Replacement tip set contains two each of
the four styles of tips.
73249
Convertible Snap-Ring Pliers
Multi-purpose pliers adjust for internal or external snap rings.
73245
Fits internal rings 0.375" to 1.00" and
external rings 0.250" to 0.875".
.038” straight tip. 5-7/8" overall length.
73246
Fits internal rings 1.023" to 1.625" and
external rings 0.938" to 1.438". .070"
straight tip. 7-5/8" overall length.
73245
Combination Internal/External Snap-Ring Pliers Kits
Sturdy plastic-boxed assortment of snap rings with appropriate pliers for
on-the-job or bench use. Box measures
13-1/2" x 9-1/2" front-to-back x 2-1/8" D.
73235 Plastic-box assortment contains over 220
internal snap rings in sizes up to 1.023"
housing diameter & external snap rings
in sizes up to 0.875". Snap-ring pliers
No. 73236 & No. 73241 also included.
Hinged cover & identification label in
cover. Individual compartments for each
snap ring.
73240 Plastic-box assortment contains selection
of internal snap rings up to 1.625" housing diameter & external snap rings in
sixes up to 1.438". Snap-ring pliers No.
73246 included. Hinged cover, individual
compartments for each snap ring.
Identification label in cover.
73235
Slip-Joint Pliers
19
Standard Slip-Joint Pliers
All Klein slip-joint pliers are nickel-chrome plated with knurled handles.
Have shear-type wire cutter and two jaw positions. Choice of plasticdipped or plain handles.
Overall Jaw
Jaw
Jaw
Cat.
No.
(in)
(in)
(in)
(in)
D511-6
6
1-3/32 1-3/16 13/32
511-6
With plain handles.
D511-8
8
1-5/16 1-1/4 7/16
511-8
With plain handles.
D511-10
10
1-1/2 1-1/2
1/2
511-10 With plain handles.
WWW.HANESSUPPLY.COM
511-6
19 -63
Hand Tools
These pliers are used to install snap rings that form a retaining system
on cylindrical supports. Eliminates costly machining or assembly and
cuts product bulk and weight. The snap rings fit into grooves, providing
a shoulder for holding components in place. Internal snap-rings used in
housings, boxes etc. External rings are for shafts, studs, etc.
Snap-ring pliers are made of quality carbon steel with corrosion-resistant black-oxide finish. Tips are heat treated for a secure grip. They release
easily when ring is in position. Pliers are available with fixed or interchangeable tips for internal or external rings. Choice of straight, 45O or 90O
tips. Convertible pliers handle
both internal and external
snap rings by means of a
simple thumbscrew adjustField Style
ment. Spring-loaded models
keep tips open on internal
pliers and closed on external
pliers.
Field-style pliers have
fixed tips without cushion
Deluxe Style
grips or springs. Deluxestyle
pliers are spring-loaded and
include cushion-grip handles
for improved user comfort
and control.
Shaft
O.D. (in)
Albany/NE Division:
518.438.0139
Rochester Division:
585.235.0160
FAX:
FAX:
FAX:
716.826.4412
518.438.5343
585.235.0229
CCISCO: 843.238.1338
FAX:
843.238.8337
Hand Tools
Klein Tools
Hose-Clamp Pliers
Type NM Cable Strippers/Cutters
For installation and removal of spring-tension hose clamps. Slip-joint
action grips full range of clamp sizes. Grips with either end or side of jaws
for working in tight places. Nickel-chrome plated. Plastic-dipped or plain
handles.
Quickly Removes Outer Jacket of Romex® Cable
• Strong-gripping serrated nose;
easy bending, shaping and pulling
of wire
• Narrow nose fits into tight places
• Precision shear-type blades for
square, clean cuts on solid copper
wire
• Rugged 2-piece rivet adjusts to preferred tension
• Spring-loaded action for self-opening
• Handy closure lock for convenient storage
• Cushion grip handles provide comfort
• 12 and 14 gauge stripping slots quickly remove outer jacket of Type
NM-B nonmetallic-sheathed cable
• Precision-ground stripping holes easily remove insulation on 12 and
14 AWG wires
• Holes for quick wire looping and bending
• 6-32 and 8-32 screw-shearing holes
Cat.
No.
D514-8
514-8
Overall Jaw
Jaw
Jaw
Lgth.
Lgth. Width Thkns.
(in)
(in)
(in)
(in)
7-5/8
1-7/8 1-5/16 3/8
With plain handles.
D514-8
Pump Pliers
Jaws are positioned and locked into place by engaging tongue in proper
groove. Series of channels gives wide range of jaw openings. Jaws cannot
slip even under heavy pressure. All four lengths with yellow plastic-dipped
straight handles; 6", 10", 12" lengths are also available with heavy-duty
(HD) plastic-dipped handles.
Cat. No.
Length (in) Max. Cap. (in)
D502-6
6-1/2
1
HD502-6 With heavy-duty plastic-dipped handles.
D502-10
10
1-3/4
D502-12
12
2-1/8
D502-16
16
4-1/4
Romex® is a Registered Trademark of General Cable Industries Inc. or an affiliate.
Cat.
No.
1412
Type
NM-B Cable
12/2 & 14/2
AWG Solid
Wire Gauges
No. 12 & 14
Handle
Color
Yellow
Length
(in)
7-7/8
Combination Wire-Stripping & Cutting Tools
Wire Strippers-Cutters
SCISSORS
Electrician’s Scissors
Designed for heavy-duty use. Strong, tough, tempered steel.
Nickel-plated finish. Scraper and file on outside of both blades.
Sharp points. Screw-hinge permits adjustment.
Cat.
No.
2100-5
Overall
Lgth. (in)
5
Electrician’s Scissors with Stripping Notches
Similar to No. 2100-5, but with lower blade serrated to minimize
slippage of wire when cutting. Upper blade has notches for stripping
19- and 23-gauge wire. Rounded points.
Cat.
No.
2100-7
Overall
Lgth. (in)
5
This precision stripping tool kit includes a selection of the most used
components for fiber optic stripping, together with complete instructions,
cleaning brush and push-out tool.
Kit Components for Stripping Fiber-Optic
Buffer/Coating up to 900 Microns
Hand Tools
19
Handle Color
Yellow
Red
Yellow
11045
11046
Strips AWG Gauges
No. 10, 12, 14, 16, 18 solid wire
No. 16, 18, 20, 22, 24, 26 stranded wire
No. 22, 24, 26, 28, 30 solid wire
Cuts and loops copper and aluminum wire. Compact, flat design; easy to
store and carry; narrow nose fits into tight places. Tough, hardened steel
with smooth, ground shear-type blades for square, clean cuts.
Cuts solid wire up to No. 10 AWG (4.0mm) and most fine stranded cable
up to 1/2" OD (12mm). Plastic-dipped handles for comfort.
Do not use for cutting steel wire or bolts.
Cat.
No.
11044
Length
(in)
6
Multi-Purpose Wire Stripper-Cutter
Strips six standard wire sizes without nicking wire: No. 10 through 20
AWG (2.6 through .8mm). Scissors action of 1/2" wide cutter makes clean
cuts with little effort. Serrated nose jaws to bend, shape, or pull wire; holes
for looping wire ends. Compact; only 6" long. Coil-spring
opening action reduces fatigue. Comfortable,
plastic-covered handles.
NOTE: Cutter-Blades are Normal sharpness. To order replacement cutter blades, add suffix N
to Blade Set Cat. No. above for normal sharpness or suffix S for extra-sharp blades, used for
stripping extra-hard, tough or thick coatings.
Cat.
No.
1011
Length
(in)
6
Wire Stripper-Cutter
A handy, light, compact tool for stripping insulation from
12 to 26 AWG wire. Convenient hole for looping
or bending wire. With or without hold-open
spring. Plastic-dipped handles.
Cat. No.
Length
No.
(in)
1004 (with spring)
5
1003 (without spring)
5
19 -64
11047
Tube Guides
Cat. No. Size (in)
MS1-RT-10
.010
MS1-RB-06 .0063
MS1-RT-13
.013
MS-1-FS MS1-RB-08 .008
MS1-RT-21
.021
MS1-RB-10 .010
MS1-RT-25
.025
MS1-RT-40
.040
KIT COMPONENTS FOR JACKET STRIPPING
MS-2-L MS2-RB-44S .044
MS2-RT-D1
.103
MS2-RB-54S .054
MS2-RT-D2
.122
Please Call for More Information.
Cat. No.
11045
11046
11047
11045
Wire Cutter
Standard (non-thermal) Kit for Stripping
Fiber-Optic Cable
Blade Sets
Handle
Asmbly. (w/Tube Guide Locks)
Cat. No.
Cat. No.
Size (in)
Compact, lightweight strippers gauge,
cut, strip and loop wire. Springloaded, self-opening action. Flat
design makes them easy to store and
carry. Narrow nose fits into tight
places. Strip wire quickly, cleanly,
evenly. Strong, hardened-steel with
precision-ground stripping holes.
Clear gauge markings on both sides.
Black oxide finish. Comfortable plastic-dipped handles. Overall length 6".
WWW.HANESSUPPLY.COM
Albany/NE Division:
518.438.0139
Rochester Division:
585.235.0160
FAX:
FAX:
FAX:
716.826.4412
518.438.5343
585.235.0229
CCISCO: 843.238.1338
FAX:
843.238.8337
Hand Tools
Klein Tools
Multi-Purpose 6-in-One Tool
Metric Multi-Purpose Tool
Shears bolts clean, cuts wire, strips wire,
measures stud sizes, gauges wire sizes,
and crimps insulated terminals. For sizes
10 to 22 AWG (6.0 to 0.75 mm²). Cuts bolt
sizes 10-24, 10- 32, 8-32, 6-32 and 4-40.
Plastic-covered handles for comfort.
Metric wire pliers are dual marked in AWG and metric sizes for added
versatility. Cuts metric bolts. Wire cutter conveniently placed in tip of nose.
Solderless terminal crimping dies for 0.75 to 8 mm diameter wire (22-8
AWG). Also crimps 7 and 8 mm ignition terminals. Stripping dies for 0.75
to 14 mm. Cuts five metric bolt sizes: M2.6, M3, M3.5, M4 and M5.
Measuring guides for stripping and bolt length marked on tool. Jumbo
cushion-grip handles for added comfort and strength.
Cat. No.
1000
Length (in)
7-1/2
70286
Metric cutter/stripper/crimper.
Overall length 8-7/8"
Long-Nose All-Purpose Tool
All-purpose cutter/crimper handles a wide range of sizes and functions:
wire cutting, bolt cutting, wire stripping and crimping including 7 to 8 mm
ignition terminals. Cutters and strippers are in front of the pivot for
Maximum ease-of-use in reaching into
tight places. Tool features crimping dies
for insulated and non-insulated connectors from 10 to 22 gauge, and cutters for
4-40, 5-40, 6-32, 8-32, 10-32 and 10-24
bolts. Narrow, serrated plier jaws to pull,
loop and bend wire. Plastic-covered handles for maximum comfort.
Cat. No.
1010
Length (in)
8-1/4
Compound-Action Ratcheting Crimper
Compound-Action Crimping Tool crimps 22-10 AWG insulated terminals
to meet or exceed MIL-SPEC pull-out tests. Built-in ratchet with safety
release assures uniform crimps every time. Compound lever-action of
narrow-span handles puts more crimping power into each squeeze.
Special locator quickly positions terminal for double crimp. Comfort-grip
plastic handles are 9" long.
T1710
Compound-action crimper for
22-10 AWG insulated terminals.
Cable Preparation Tools
All-Purpose Tool
Crimps insulated & non-insulated terminals,
lugs, and splices. Also cuts wire, strips wire,
cuts bolts, crimps 7 mm ignition and distributor terminals. For sizes No. 10 to 22 AWG.
Cuts bolt sized 10-24, 10-32, 8-32, 6-32
and 4-40. Wire cutter in nose. Comfortable
plastic-covered handles.
Cat. No.
1002
Length (in)
8-1/2
All-Purpose Electrician’s Tool
Two wire cutters–one at tip, the other halfway back near stripping holesdouble the utility of this tool. Crimps insulated & non-insulated terminals,
lugs & splices. Cuts wire, strips wire, cuts bolts, crimps 7-8mm ignition terminals. Strips No. 8 to 18 AWG solid wire or 10 to 22 AWG stranded wire.
Cuts bolt sizes 6-32, 8-32, 10-32, 10-24
and 4-40. Pivot nut adjusts tension. Leftand-right-hand wire-looping holes near tip.
Full-sized plastic-covered handles for
comfort. Easy-to-read markings. Crimping
dies color-coded for easy identification.
Cat. No.
1001
These tools, cut, slit and remove
insulation from a variety of cable
including Triplex or Quadraplex;
sizes from No. 4 to 750 MCM ACSR
74504
or copper quickly, cleanly & safely.
These tools are compact–ideal for
use in confined areas. No open74503
bladed knife or other cutter needed
to cleanly strip insulation without
damage. Tools adjust for perfect
circumferential cuts for the cable
size, then let you slit between cuts,
74502
all without nicking the cable.
Removing the separated insulation
is easy, using the built-in grippers at
74501
the tip of each tool. Total time for
the job, less than one minute! The
simple three-step process requires
a minimum of effort and affords
maximum safety.
Cat. No. Length (in) Accepts Wire Sizes
74501
74502
74503
74504
74505
Length (in)
8-3/4
9-1/2
No. 4 to 4/0 ACSR or Copper
10-5/8
No. 3/0 to 350 MCM ACSR or Copper
11-5/8
500 MCM to 750 MCM ACSR or Copper
9-1/2
No. 1/0 to 2/0 (primary or secondary cable)
Same as 74502 with stripping holes.
No. 1 hole-No. 1/0 and 2/0 ACSR or Copper
No. 2 hole-No. 3/0 and 4/0 ACSR or Copper
*General purpose stripper No. 74504 requires parallel slitting with a knife.
Crimping Tools
Cable Cutters
Crimping Tool
For non-insulated terminals and connectors.
Designed for crimping non-insulated solderless terminals and connectors
ranging from No. 10 to 22 AWG. Specially
hardened wire cutter in nose. Tapered nose
for working in confined spaces. Plasticdipped handles. One handle is red, the other
black to identify proper crimping position.
Cat. No.
1006
Length (in)
9-3/4
Length (in)
9-1/2
Compact Cable Cutter
Precise, one-hand shearing action cuts copper and aluminum multi-strand
cable and wire, such as 24-gauge, 100-pair telephone cable. Special
shear angle cuts clean without compression or causing frayed ends.
Heat-treated, high-carbon steel shearing edges. Drop-forged body with
3/8" casehardened rivet. Red plastic-dipped handles. Not designed for
cutting steel or ACSR.
Cat. No.
63055
Length (in)
8
WWW.HANESSUPPLY.COM
19 -65
19
Hand Tools
For insulated and non-insulated terminals and connectors.
Thin nose permits work in confined space.
Crimping die marked for insulated and
non-insulated solderless terminals and
connectors. Accommodates wire from
No. 10 to 22 AWG. Wire cutter in nose.
Red plastic-dipped handles for comfort.
Length (in)
9-3/4
This handy, economical tool handles most cable-cutting jobs with ease.
Special high-leverage design gives it amazing cutting capability for its size.
Cable-gripping, shear-type jaws cut up to 4/0 aluminum (not ACSR), up to
2/0 soft copper, up to 100-pair, 24-gauge communication cable. Makes
clean, efficient cuts. Compact, only 9-1/2" long, can be carried in tool
pouch or Klein No. 5112 or No. 5112T tool holders. Ideal for working in
confined spaces. Tough, comfortable, red plastic-dipped handles. Not
designed for cutting steel or ACSR.
Cat. No.
63050
Crimping Tool
Cat. No.
1005
High-Leverage Cable Cutter
Albany/NE Division:
518.438.0139
Rochester Division:
585.235.0160
FAX:
FAX:
FAX:
716.826.4412
518.438.5343
585.235.0229
CCISCO: 843.238.1338
FAX:
843.238.8337
Hand Tools
Klein Tools
All-Purpose Shears and BX Cutter
High-leverage; shear-type design for one hand operation. Lightweight,
compact. Has stripping notch. Cuts sheet metal, steel strapping, bundling
wire. Cuts cable easily and quickly. Bow in handle designed to restore BX
cable to original shape after cutting.
Red plastic-dipped handles.
Cat. No. Length (in)
1104
7-5/8" with stripping notch
Electrical Testers
Circuit Tester
Tests Circuits rated from 80 to 600 volts AC/DC. Compact, pocket size. Has
high visibility neon lamp indicator. High-impact, sealed 5-11/16" prods on
long 24" leads for convenience in testing motors, fuses, relays, switches, etc.
Resistor between each prod & lead. Reliable electronic components.
Cat. No. Overall Length w/Prods (in)
69105 35
Length of Cut (in)
7/8"
Ratcheting Cable Cutter
With one-hand, cleanly cut copper up to 400 MCM, and aluminum & multiconductor cables up to 600 MCM. Unique ratchet-action holds cable tight
and allows rapid, straight cuts with minimum effort. Hold-open spring speeds
cutting action. Quick-release lever opens blade at any time during operation.
Large, finger-formed handles have limit
guards and plastic covering for comfortable, non-slip grip. Strong, lightweight
tool can be locked in closed position for
pouch carrying. Not designed for cutting
steel or ACSR.
Cat. No. Length (in) MCM Cable Cutting Capacity
63060
10"
400 Copper, 600 Aluminum and Multi-Conductor
Utility Cable Cutter
Rugged, lightweight. Cuts soft copper & aluminum cable up to 350 MCM
easily. Drop-forged steel with black oxide finish. Shear-type hook jaws grab
and hold cable to make clean, even cuts. Beveled tips for positive mating.
Hinge bolt with pinset nut for proper
blade tension. Non-slip red vinyl
grips. Not designed for cutting
steel or ACSR.
Cat. No. Length (in) MCM Cable Cutting Cap.
63035 16-3/4
350 Copper, 350 Aluminum
Standard Cable Cutters
Economically priced, lightweight, yet efficient shear-type cable cutters.
No. 63041 cuts soft cable up to 1-3/8" diameter; see table for nominal MCM
ratings. No. 63045 cuts soft cable up to 1-3/4"; see table for nominal MCM
ratings. Hook jaw shape forces cable into jaws. Exceptionally strong fiberglass
handles with heavy vinyl grips for comfort and slip resistance. Heavy-duty pins
in head serve as blade-stops. Jaws are of drop-forged alloy tool steel and are
replaceable if damaged or worn out. Beveled tips assure positive mating and
hinge on a rugged bolt with a pinset nut to maintain proper blade tension.
Make a clean, even cut for ease in fitting lugs and terminals. Not
designed for cutting steel or ACSR.
Overall
Approx.
Cat. No. MCM Cable-Cutting Cap.
Lgth. (in) Wt. (lbs)
63041 500 Copper, 750 Aluminum
25-1/2
4-1/2
63045 1000 Copper, 1200 Aluminum 32
6
REPLACEMENT CABLE CUTTER HEADS (COMPLETE):
Cat. No. Fits Klein Cat.
63081 63041
63090 63045
Hand Tools
Battery-powered tester quickly checks continuity of dead circuits, switches,
appliances, cords, fuses, motors, control equipment, coils and panel
boards. Also tests circuits for low-resistance shorts and helps identify
wires in multi-wire cables. Spring-steel pocket clip serves as test prod.
Lead is 36" long with plug on one end, alligator clip on the other. Body is
copper-nickel-plated brass with plug receptacle in one end, incandescent
bulb in the other. Can also be used as a flashlight. Uses two AA-size
penlight batteries (not included). Do not use on live electrical circuits.
Cat.
Overall Length,
No.
Prod to Clip (in)
69110
45
Wiggy® Solenoid Voltage Tester
Genuine Wiggy® solenoid voltage tester for 120V to 600V AC or 120V to
600V DC current. Locates blown fuses, grounds and system leaks quickly.
U.L. and C.S.A. approved. Has large, easy-to-read voltage indicator scale
and DC polarity indicator. The Wiggy tester operates without the use of
batteries. Compact design, with high-impact case and prod assemblies.
Sealed construction keeps out dust and dirt. Prods have retractable protective sleeves that can be adjusted and locked
to expose the appropriate tip length desired for
any application. Prods store conveniently in
case, which can also serve as prod holder. Test
leads are 28” long (including prod module) and
have strain-relief protection. Replacement polarity-indicating cap and replacement test leads
with prods are available. Rugged leather
Voltage-Tester Holder is available, see No. 5137.
69115
Voltage Tester for 120-600V AC or 120-600V DC with DC polarity indicator.
Tester body is 6" long; leads are 28" long including 6" prod module.
69116
Replacement Lead Module, complete with prods.
69117
Replacement DC Polarity Indicating Cap for No. 69115.
Continuity Tester
Heavy-Duty Ratcheting Cutter
19
Continuity Tester
The ratchet-action design of this cutter provides maximum leverage
with minimum effort for severe-service use in cutting ACSR and ACAR,
common guy strand, steel wire rope, steel rod (CRS soft) and copper
or aluminum cable. Features drop-forged heat-treated, shear-type blades,
plus a 36" long steel handle with heavy vinyl grips for comfort and slipresistance. The design incorporates a blade-advance knob which permits
fast rotation of the blade to engage the cable or other material being cut,
plus a quick release mechanism which allows removal of the cable or
rod before completion of the cut, if
desired. Not designed for cutting EHS
Guy Strand or reinforcement rod.
Quickly reveals shorts or broken circuits in lamp cords and fuses, motors,
electrical appliances, switches, receptacles and all types of electrical
devices and controls. Tests for continuity of circuit with power off. Bulb
in handle glows when circuit is
complete. Pointed 3-3/4" probe gets
right to the problem. Deluxe 4" long
handle with removable nylon cap
holds replaceable bulb and battery.
36" test lead with fully insulated alligator clip.
Uses one AAA battery (not included).
Do not use on live electrical circuits.
69133 Continuity tester complete with bulb, less battery.
Overall length prod to clip, 43-3/4".
69131 Replacement bulb for Cat. No. 69133.
Cat.
Overall Approx.
No.
Cutting Capacity
Lgth. (in) Wt. (lbs)
63700 1-1/4" Dia. ACSR, ACAR
36
13
7/16" Dia. Common Guy Strand
5/8" Dia. Steel Wire Rope
1/2" Dia. Steel Rod (CRS Soft)
750 MCM (1-3/8" Dia.) Copper or Aluminum
19 -66
WWW.HANESSUPPLY.COM
Albany/NE Division:
518.438.0139
Rochester Division:
585.235.0160
FAX:
FAX:
FAX:
716.826.4412
518.438.5343
585.235.0229
CCISCO: 843.238.1338
FAX:
843.238.8337
Hand Tools
Klein Tools
Low-Voltage Tester
Lineman’s Wrenches
Low-voltage device for checking live 6-24V, AC or DC circuits. Tests for
shorts on automotive and truck electrical systems, motor field coils, radio
and low-voltage circuits, ground circuit of all lamps, wiring, fuses, etc.
Bulb in handle glows when circuit is complete. Pointed 3-3/4" probe
makes checking easier. Deluxe 4" long handle with nylon top holds
replaceable bulb. 36" test lead with fully insulated alligator clip.
Standard Type
69127 Voltage tester complete with bulb. Overall length prod to clip, 43-3/4"
69130 Replacement bulb for Cat. No. 69127
Forged from special bar steel and heat-treated. Each end has two different
size openings. Hole is provided at larger end for turning-in standard pole
steps. Wrench is particularly suited for use on the heavier three-bolt guy
clamps on which clearance is limited. Wrench is 13" long. Available
for 5/8" or 3/4" hardware.
3146
For 5/8" hardware. Large end has 1-3/32" and 29/32" openings.
Small end has 13/16" and 5/8" openings. Dark blue painted finish.
3146A For 3/4" hardware. Large end has 1-1/16" and 1-5/16" openings.
Small end has 5/8" and 7/8" openings. Dark blue painted finish with
small end painted white.
Bell System Type
Similar to standard lineman’s wrench, but with end openings sized to
NEMA hardware specifications. Overall length is 13".
Pocket-Size Circuit Tester
Handy, pocket-clip tester for
checking line circuits. Can be
used on 100-500 volt circuits,
AC or DC. Neon glow-lamp indicates
hot side of line. Screwdriver-shaped probe easily fits into receptacles.
Cat. No.
69125
69129
69126-12
Description
Pocketsize tester complete with bulb. Probe length: 1-5/8"; overall length: 4-1/2"
Replacement bulb for Cat. No. 69125
12 No. 69125 testers in plastic display tray.
Low-Voltage Twin-Lead Tester
Tests 5-50 volt, AC or DC circuits and components. Built-in lamp glows
if circuit is live. Each of
the 4-1/2" test leads has
an alligator clip on the
end. Handy pocket clip.
69134
Low-Voltage twin-lead tester
Tests for DC polarity, frequency, and polyphase line. Checks and indicates
voltage on circuits up to 460 volts, AC or DC. Combination of glow lamps
indicate voltage being tested-110, 220, 277, or 460 volts. Test leads furnished with probes on the ends.
69135
Multi-volt twin-lead tester
General Purpose Twin-Lead Tester
Tests voltage in 90-250 volt range, AC or DC. Neon lamp glows indicating
live circuit. The 5" test
leads have probes on
the ends. Has handy
pocket clip.
Test Lead Set
69128
Test lead set
Versatile wrench fits all nuts and bolts to 1-1/2". Eliminates the need for
carrying several fixed-size wrenches. Drop forged from select alloy steel
with continuous-taper handle. Industrial black finish.
Cat.
No.
3239
Max. Size
Cap. (in)
1-1/2
Length
(in)
15
1/2" Drive Ratcheting Construction Wrench
Accepts 1/2" square-drive hex socket. Reversible ratchet. Eliminates the
need for carrying several fixed-size wrenches. Drop forged from select
alloy steel with continuous-taper handle for aligning bolt holes. Industrial
black finish.
Overall
Lgth. (in)
15
Erection Wrenches
Drop-forged from select alloy
steel to withstand high-leverage
and heavy loads. Extra-heavyduty head area gives maximum
strength and durability. Wrench
handle features an extra-deep offset
to provide additional hand-clearance
without sacrificing tightening power.
Continuous taper of handle makes
lining-up bolt holes easy, allows use
on a range of bolt-hole sizes without
binding. Extra-large hub area allows use on larger diameter holes
than possible with most other wrenches. Available in heavy, regular
and utility nut sizes. Catalog
Cat.
Nut
Bolt
Nominal
number, bolt size and
No.
Type
Size (in) Opening (in)
nominal opening size are
3210 U.S. Heavy
1/2
7/8
stamped on every wrench
3211 U.S. Heavy
5/8
1-1/16
for easy identification.
3212 U.S. Heavy
3/4
1-1/4
American Bridge Design.
A- Nominal Opening (in)
Bolt
U.S.
U.S.
Size (in) Heavy Reg. Utility
1/2
7/8
13/16
5/8
1-1/16
1
15/16
3/4
1-1/4 1-1/8 1-1/16
7/8
1-7/16 1-5/16
1
1-5/8 1-1/2
Bolt
Size (in)
1/2
5/8
3/4
7/8
1
3213
3214
3219
3220
3221
3222
3223
3224
3231
3232
U.S. Heavy
U.S. Heavy
U.S. Regular
U.S. Regular
U.S. Regular
U.S. Regular
U.S. Regular
U.S. Regular
Utility
Utility
7/8
1
1/2
1/2
5/8
3/4
7/8
1
5/8
3/4
Dimensions (in)
B
C
D
E
F
G
J
1-13/16 3/8
5/8
5/8
1/8
1/4 1-7/16
2-9/32 7/16
7/8
7/8
1/8 5/16 1-3/4
2-1/2
9/16
1
1
1/4
3/8
2
3-1/16 11/16 1-1/8 1-1/8
1/4
1/2 2-5/16
3-17/32 11/16 1-1/8 1-1/8 3/16 1/2 2-11/16
WWW.HANESSUPPLY.COM
1-7/16
1-5/8
3/4
13/16
1
1-1/8
1-5/16
1-1/2
15/16
1-1/16
K
3
3
4
4
4
Length
(in)
14-1/2
14-3/4
16-1/2
17-1/4
17-11/16
14-5/8
14-1/2
14-3/4
16-1/2
17-1/4
17-11/16
14-3/4
16-1/2
L
M
7-9/16
12
10
14-3/4
11
16-1/2
11
17-1/4
11
17-11/16
19 -67
19
Hand Tools
Set of two 32" leads. Red and black. Each lead has
alligator clips attached to both ends.
Adjustable-Head Construction Wrench
Cat.
No.
3238
Multi-Volt Twin-Lead Tester
69136
General purpose twin-lead tester.
69132-12 12 No. 69136 testers in plastic display tray
3146B Large end has 1-1/16" and 1-3/16"
openings. Small end has 11/16" and
7/8" openings. White painted finish.
Albany/NE Division:
518.438.0139
Rochester Division:
585.235.0160
FAX:
FAX:
FAX:
716.826.4412
518.438.5343
585.235.0229
CCISCO: 843.238.1338
FAX:
843.238.8337
Hand Tools
Klein Tools
Round-Shank, Cabinet-Tip with Plastic-Coated Blade
Grip-It Strap Wrenches
The completely adjustable strap wrench in three different sizes. Urethanecovered, high-strength belting attached to lightweight, I-beam handle with
patented cam-action design permits uniform, high-torque application.
Under normal conditions, will not scratch, damage or deform polished pipe
and fittings, plastic pipe and fittings, oil and water filters, glass pipe, PVC
conduit, and polished shafts. Also works on alternator belts, flywheels and
propeller assemblies. Works in the tightest quarters. Can be ratcheted with
one hand.
Cat.
Handle
Dia. Cap.
No. Length (in) O.D. (in)
S6H
6
1-1/2 - 5
S12H
12
1-1/2 - 5
S18H
18
1-1/8 - 8
CUSHION GRIP SCREWDRIVERS
These Cushion-Grip screwdrivers have a plastic-coated, non-insulated
shank. Resists cutting, cracking and chipping. Coating is intended for protection of circuits only. Dipped coating is thin enough to permit use in confined areas. Tip is exposed 1/8" beyond insulation. Available with both regular and heavy-duty shanks for all types of electrical and telecommunications applications.
Heavy-Duty Plastic-Coated Screwdrivers
Cat.
Shank Tip Width x
Overall
No.
Shank Length (in)
Length (in)
620-3
3/16 x 2-3/4
6-1/2
620-4
1/4 x 3-3/4
8-3/32
620-6
5/16 x 5-3/4
10-11/16
620-8
3/8 x 7-3/4
13-3/16
Regular Plastic-Coated Screwdrivers
621-6
3/16 x 5-3/4
9-1/2
621-8
3/16 x 7-3/4
11-1/2
621-10
3/16 x 9-3/4
13-1/2
620 Series
WARNING: Plastic-dipped blades, shanks,
or other tool parts are NOT intended for
protection against electrical shock.
Heavy-Duty Square-Shank, Keystone-Tip
Designed for the most demanding uses. With heavy-duty square shank for
wrench-assisted turning. Keystone-tip.
Cat.
Shank Tip Width x
No.
Shank Length (in)
600-1
1/4 x 1-1/2
600-4
1/4 x 4
600-6
5/16 x 6
600-8
3/8 x 8
600-12
1/2 x 12
Overall
Length (in)
3-7/16
8-11/32
10-15/16
13-7/16
17-7/16
Round-Shank, Square-Recess Tip
Round shank with special tip for square-recess screws. Handle-ends are
color-coded for easy selection of correct tips for screw sizes 3 through 14.
600 Series
Stubby 600-1
Cat.
No.
660
661
662
663
Round-Shank, Cabinet-Tip
Perfect for electrical and telephone work. Narrow tip permits blade access
where space is limited.
Cat.
Shank Tip Width x
No.
Shank Length (in)
601-3
3/16 x 3
601-4
3/16 x 4
601-6
3/16 x 6
601-8
3/16 x 8
601-10
3/16 x 10
Overall
Length (in)
6-3/4
7-3/4
9-3/4
11-3/4
13-3/4
660 Series
5, 6, 7
8, 9, 10
12 and 14
Torx tip drive cuts slippage, saves fasteners and transmits more torque to
the work. Similar to round-shank Cushion-Grip screwdrivers. Handle-ends
are color-coded for Torx size identification
Cat. TORX
No.
Size
19542 T15
19543 T20
19544 T25
19545 T27
19546 T30
Built to handle the tough jobs with ease. Keystone-tip.
Overall
Length (in)
6-3/4
8-11/32
10-15/16
13-7/16
15-7/16
17-7/16
For Screw
Sizes
3 and 4
5, 6, 7
8, 9, 10
12 and 14
Round-Shank, TORX® Tip
601 Series
Heavy-Duty Round-Shank, Keystone-Tip
Cat.
Shank Tip Width x
No.
Shank Length (in)
602-3
7/32 x 3
602-4
1/4 x 4
602-6
5/16 x 6
602-8
3/8 x 8
602-10
3/8 x 10
602-12
3/8 x 12
665
666
667
4" Shank
Color
Code
Yellow
Green
Red
Black
8" Shank
No. 1
Green
No. 2
Red
No. 3
Black
Point
Size
No. 0
No. 1
No. 2
No. 3
602 Series
Color
Code
Yellow
Green
Blue
Brown
Red
Shank
Overall
Length (in) Length (in)
4
8-5/16
4
8-5/16
4
8-5/16
4
8-5/16
4
8-5/16
19542 Series
Conduit-Fitting Screwdriver
®
Round-Shank, Special Profilated Phillips-Tip
Tips are profilated to provide a more consistent geometric symmetry than
conventional Phillips-tip screwdrivers. Provide more accurate fit
and torque without slippage.
Hooded-blade design keeps tip from slipping out of screws, especially
when tightening overhead conduit fittings. Deep-ribbed Cushion-Grip for
maximum turning power and comfort.
Cat. Shank Tip
No. Width (in)
19360
3/8
Shank
Length (in)
1
Overall
Length (in)
5-11/32
603 Series
Hand Tools
19
Cat.
Point
Shank
Overall
No.
Size (in) Length (in) Length (in)
603-1
No. 2
1-1/2
3-7/16
603-3
No. 1
3
6-3/4
603-4
No. 2
4
8-5/16
603-6
No. 3
6
11
603-7
No. 2
7
11-5/16
603-10
No. 2
10
14-5/16
Conduit-Fitting and Reaming Screwdriver
Stubby 603-1
Heavy-Duty Round-Shank, Cabinet-Tip
Heavy-duty shank and tip for rugged usage. Narrow tip permits blade
access where space is limited.
Cat.
Shank Tip Width x
No.
Shank Length (in)
605-4
1/4 x 4
605-6
1/4 x 6
605-8
1/4 x 8
605-10
1/4 x 10
19 -68
Overall
Length (in)
8-11/32
10-11/32
12-11/32
14-11/32
605 Series
As a conduit-fitting screwdriver, the hooded-blade design keeps the tip
from slipping out of screw, especially overhead. As a conduit reamer, it
reams and smooths 1/2", 3/4" and 1" thin-wall conduit ends to protect wire
and permit correct installation of fittings. It reams both the inside and outside at the same time, and has a hard anodized finish to resist wear.
The Cushion-Grip handle helps resists slippage for extra turning power
and comfort. Klein’s patented Tip-Ident® marking system, with its vividwhite symbol permanently inscribed on the end of the handle allows for
easy tool selection. The shaft and tip are made of high-quality tempered
steel, heat-treated for maximum strength. Shaft has internal flanges that
provide an extra-strong, torque-resistant anchor, deep in the handle.
Cat.
No.
85188
19351
Shank-Tip
Shank
Overall
Width (in) Length (in ) Length (in)
3/8
3
7-3/8
Conduit Reamer Replacement Blade
WWW.HANESSUPPLY.COM
Albany/NE Division:
518.438.0139
Rochester Division:
585.235.0160
FAX:
FAX:
FAX:
716.826.4412
518.438.5343
585.235.0229
CCISCO: 843.238.1338
FAX:
843.238.8337
Hand Tools
Klein Tools
®
Rapi-Driv Screwdrivers with Slotted or Phillips-Tips
Crank-action handle spins screws fast with one hand.
Shank rotates in handle to save time and effort,
especially on long-threaded screws in switch
plates, light fixtures, etc.
Cat.
No.
670-3
670-6
671-4
671-6
Cat.
No.
681-6
682-6
Spiral Ratcheting Screwdriver Set
Saves time and effort. Extended screwdriver reach. Heavy-duty design.
Forward and reverse ratcheting plus standard drive. Quick-return spring
keeps blade in the screw, automatically returns handle to driving position
after each stroke. Smooth plastic handle. Comes with 7/32" and 9/32"
slotted-tip bits and No. 2 size Phillips-tip bit. Overall length with bit extended
is 20".
Cabinet-Tip Rotary Screwdrivers
Shank Tip Width x
Overall
Shank Length (in)
Length (in)
3/16 x 4
7-3/4
3/16 x 6
9-3/4
1/4 x 4
7-3/4
1/4 x 6
9-3/4
Phillips-Tip Rotary Screwdrivers
Point
Shank Tip Width x
Overall
Size (in) Shank Length (in) Length (in)
No. 1
3/16 x 6
9-3/4
No. 2
1/4 x 6
9-3/4
64000 Ratcheting screwdriver with 3 bits
64001 Set of 3 replacement bits.
Spiral Ratcheting Screwdriver and Drill Set
5-Piece Cushion-Grip Screwdriver Set
A basic selection of the most frequently used screwdrivers,
featuring Klein heat-treated and tempered-steel blades
plus super comfortable Cushion-Grip handles. See
individual screwdriver listings for description and
close-up photos. Set is provided in reclosable
seal-tight vinyl pouch.
Cat.
No.
600-4
601-6
602-6
603-4
605-6
Cat. No. 85075 – Set Contains
Description
Overall
Length (in)
Square-shank, keystone-tip*
8-11/32
Round-shank, cabinet-tip
9-3/4
Round-shank, keystone-tip*
10-15/16
Round-shank, No. 2 Phillips-tip
8-5/16
Round-shank, cabinet-tip*
10-11/32
This tool does double duty as a screwdriver and a drill. Ideal for use in
confined spaces. Forward and reverse ratcheting drive plus standard drive.
Quick-return spring keeps bit in work, automatically returns handle to driving position after each stroke. Supplied with five-piece screwdriver-bit and drill-bit set in plastic-pouch. Set includes 5/32"
slotted-tip bit, No. 2 Phillips-tip bit, and three drill bits-5/64",
7/64" and 9/64". Overall length with bit extended is 13-1/2".
64025 Ratcheting drive with five-piece set of screwdriver and drill bits.
64026 Five-piece replacement set of screwdriver and drill bits. Supplied in plastic pouch.
*Heavyduty
model
Folding-Screwdriver Set
7-Piece Cushion-Grip Screwdriver Set
A convenient selection of popular screwdrivers including three cabinet-tip,
two Phillips-tip and two keystone-tip styles, all with Cushion-Grip highquality design and construction features. See individual screwdriver listings
for description and close-up photos. Set is provided in reclosable seal-tight vinyl pouch.
Cat.
No.
600-4
602-6
601-3
601-6
605-4
603-3
603-4
SPECIALTY SCREWDRIVERS
Overall
Description
Length (in)
8-11/32
10-15/16
6-3/4
9-3/4
8-11/32
6-3/4
8-5/16
A pocket-size combination tool with heattreated chrome-nickel alloy-steel blades. All
five blades fold flat into handle; can be used
straight out or at a right angle for extra leverage. Contains 1/8", 3/16" and 1/4" slotted-tip
screwdriver blades; No. 2 Phillips-tip screwdriver blade; and 3/16" awl.
Cat.
No.
70585
Handle
Blade
Length (in) Lengths (in)
3-5/8
2-3/8 to 3
PLASTIC-HANDLE, SLOTTED
SCREWDRIVERS
*Heavy-duty model
WARNING: Do not use any screwdriver on live electrical circuits.
WARNING: Plastic-dipped blades, shanks, or other tool parts are NOT intended for
7-Piece Screwdriver Set
Midget, Keystone-Tip
Contains all the Cushion-Grip screwdrivers in the 5-piece set No. 85075
plus a Cushion-Grip rotary screwdriver with crank-action handle and a
plastic-handle slotted screw-holding screwdriver
that permits one-hand operation in hard-to-reach
places. Set is provided in reclosable seal-tight
vinyl pouch.
Cat.
Overall
No.
Description
Length (in)
This midget screwdriver is specially designed for delicate instrument
work. Hexagon-shaped handle of tough amber plastic.
Cabinet-tip rotary screwdriver
Slotted screw-holding screwdriver
*Heavy-duty model
8-11/32
9-3/4
10-15/16
8-5/16
10-11/32
9-3/4
9-3/4
Shank Tip Width x
Overall
Shank Length (in) Length (in)
3/32 x 1-1/2
2-7/8
Pocket-Clip Screwdriver
Round-shank screwdrivers ranging from 3-1/4" to 6-7/16" long, with convenient pocket clip. No. A010 has keystone-tip, all others have cabinet tip.
Cat.
No.
A010
A130-2
A130-3
A116-2
A116-3
A116-4
A131-2
Shank Tip Width x
Shank Length (in)
3/32 x 1-3/8
1/8 x 2
1/8 x 3
3/32 x 2
3/32 x 3
3/32 x 4
1/8 x 2
WWW.HANESSUPPLY.COM
Overall
Length (in)
3-1/4
3-7/8
4-7/8
4-7/16
5-7/16
6-7/16
4-7/16
19 -69
19
Hand Tools
600-4
601-6
602-6
603-4
605-6
670-6
K36
Cat.
No.
A000
Albany/NE Division:
518.438.0139
Rochester Division:
585.235.0160
FAX:
FAX:
FAX:
716.826.4412
518.438.5343
585.235.0229
CCISCO: 843.238.1338
FAX:
843.238.8337
Hand Tools
Klein Tools
1/8" Round-Shank, Cabinet-Tip
Heavy-Duty Square-Shank, Keystone-Tip
Small-diameter shank for use in recessed holes or tight places.
Hefty square shank allows wrench-assisted turning when extra force is
needed.
Cat.
Shank Tip Width x
No.
Shank Length (in)
A216-2
1/8 x 2
A216-3
1/8 x 3
A216-4
1/8 x 4
A216-6
1/8 x 6
A216-8
1/8 x 8
A216-10
1/8 x 10
Overall
Length (in)
5
6
7
9
11
13
Cat.
No.
C66
C68
C610
C612
C718
PLASTIC-HANDLE, PHILLIPS-TIP
SCREWDRIVER
3/16" Round-Shank, Cabinet-Tip
Medium-duty screwdrivers well-suited for electrical and
telecommunications work.
Cat.
Shank Tip Width x
No.
Shank Length (in)
A316-3
3/16 x 3
A316-4
3/16 x 4
A316-6
3/16 x 6
A316-8
3/16 x 8
A316-10
3/16 x 10
Round-Shank Profilated® Phillips-Tip
Overall
Length (in)
6-5/8
7-5/8
9-5/8
11-5/8
13-5/8
Profilated tips fit more accurately and torque without slippage.
Cat.
No.
P01
P1
P2
P3
P4
1/4" Round-Shank, Keystone-Tip
Fills many job needs with a choice of lengths.
Cat.
No.
A416-3
A416-4
A416-6
A416-8
A416-10
For hard-to-get-at screw. Has oversize Comfordome handle.
Heavy-Duty 5/16" Round-Shank, Keystone-Tip
Makes turning big screws easier. Choice of three lengths.
Shank Tip Width x Overall
5/16 x 4
8
5/16 x 6
10
5/16 x 8
12
Extra-length and extra-wide blade handles the biggest screws.
Cat. Shank Tip Width x Overall
No.
A616-6
3/8 x 6
10-1/4
A616-8
3/8 x 8
12-1/4
A616-10
3/8 x 10
14-1/2
Round-Shank, Keystone-Tip
Cat. Shank Tip Width x
Overall
No. Shank Length (in) Length (in)
A132
1/4 x 1-1/4
3
A135
5/16 x 1-3/4
4
Square-Shank, Keystone-Tip
Square-shank screwdrivers with 1/4" and 5/16" tips, in 9 lengths for a wide
range of uses.
19 -70
Hand Tools
Note: All screwdriver dimensions given in inches.
WARNING: Do not use any screwdriver on live electrical circuits.
Overall
No.
BD364
3/16 x 4
7-5/8
BD366
3/16 x 6
9-5/8
Allows work in close quarters. No. A132 has cabinet tip.
No. A135 has keystone tip.
Shank Tip Width x
Overall
1/4 x 3
6-5/8
1/4 x 4
7-5/8
1/4 x 6
9-5/8
1/4 x 8
11-5/8
1/4 x 10
13-5/8
5/16 x 4
8-1/2
5/16 x 6
10-1/2
5/16 x 8
12-1/2
5/16 x 10
14-1/2
The most powerful screwdrivers you can buy. Over-sized handle is 35%
bigger, delivering up to 50% extra power to perform tough jobs with minimum effort and maximum comfort. Bull Driver screwdrivers feature exclusive Comfordome® handle, fully fluted with chamfered edges for fatiguefree driving, plus durable chrome-vanadium tempered-steel shafts and
nickel chrome precision forged and polished blades with black tips.
Round-Shank, Cabinet-Tip
Stubby Screwdrivers
Cat.
No.
C43
C44
C46
C48
C410
C54
C56
C58
C510
Cat. Pt.
Shank
Overall
No. Size Length (in) Length (in)
P18
1
8
11-1/2
P28
2
8
11-5/8
P212 2
12
15-5/8
P202 2
20
24-1/2
Bull Driver Plastic-Handle Screwdrivers
Extra-Heavy-Duty 3/8" Round-Shank, Keystone-Tip
19
Pt.
Shank
Overall
Size Length (in) Length (in)
0
2-1/2
5-1/4
1
3
6-1/2
2
4
7-5/8
3
6
10
4
8
12-1/2
Extra-Long Round-Shank, Profilated® Phillips-Tip
1/4 x 3
6-5/8
1/4 x 4
7-5/8
1/4 x 6
9-5/8
1/4 x 8
11-5/8
1/4 x 10
13-5/8
Cat.
No.
A516-4
A516-6
A516-8
Shank Tip Width x
Overall
3/8 x 6
10-1/2
3/8 x 8
12-1/2
3/8 x 10
14-1/2
3/8 x 12
16-1/2
3/8 x 18
23-5/16
BD143
7/32 x 3
7-1/2
BD144
1/4 x 4
8-1/2
BD146
1/4 x 6
10-1/2
BD156
5/16 x 6
11-3/16
BD158
5/16 x 8
13-3/16
BD408
3/8 x 8
13-3/16
BD510
3/8 x 10
15-3/16
BD512
3/8 x 12
17-3/16
Square-Shank, Keystone-Tip
Overall
BD284
1/4 x 4
8-1/2
BD286
1/4 x 6
10-1/2
BD306
5/16 x 6
11-3/16
BD308
5/16 x 8
13-3/16
BD310
5/16 x 10
15-3/16
BD410
3/8 x 10
15-3/16
BD412
3/8 x 12
17-3/16
WWW.HANESSUPPLY.COM
Albany/NE Division:
518.438.0139
Rochester Division:
585.235.0160
FAX:
FAX:
FAX:
716.826.4412
518.438.5343
585.235.0229
CCISCO: 843.238.1338
FAX:
843.238.8337
Hand Tools
Klein Tools
Stubby and Pocket-Clip Screwdrivers
Magnetic Screwdriver Sets
Each screwdriver has a powerful magnet built into its shank to hold interchangeable bits and also screws. Comfortable handle for fatigue-free driving. Interchangeable bits store inside handle. Wide selection of bits for different screw types.
Cat.
Tip
Shank Tip Width x
Overall
No.
Type
BD135
Keystone
5/16 x 1-3/4
4
BD125 No. 2 Phillips
1/4 x 1-1/4
3-5/8
*Pocket Clip
BD183*
Cabinet
1/8 x 3
5-3/4
Round-Shank, Profilated® Phillips-Tip
Cat.
No.
BD111
BD122
BD133
BD244
Pt.
Size
1
2
3
4
Magnetic bit
securely holds
the screw. Extralong shaft allows
extra reach.
Shank
Overall
3
6-5/8
4
8-1/2
6
11-3/16
8
13-3/16
6-Piece Combination Bull Driver Screwdriver Set
Set of six Bull Driver screwdrivers in reclosable,
seal-tight vinyl pouch. See individual screwdriver
listings for full details.
Cat. No.
BD111
BD122
BD135
BD146
BD284
BD306
Description
No. 1 Phillips tip, 6-5/8 overall length
No. 2 Phillips tip, 8-1/2 overall length
5/16 slotted stubby, 4 overall length
1/4 x 6 slotted, 10-1/2 overall length
PLASTIC-HANDLE SPECIALTY
SCREWDRIVERS TORX® SCREWDRIVERS
Bull Driver® Handle, Torx Tip®
Hefty handle is 35% bigger, delivers up to 50% extra power.
Cat.
No.
70509
70515
70520
70525
70527
70530
TORX
Shank
Overall
T10
4
8-1/2
T15
4
8-1/2
T20
4
8-1/2
T25
4
8-1/2
T27
4
8-1/2
T30
4
8-1/2
Description
Slotted, Phillips, Torx® Set
General-purpose assortment
Overall length 7"
70426
RV Set
Selected bits for RV market
Overall length 7"
70427
Torx® Set Contains five
popular Torx® sizes.
Overall length 7"
70035
Slotted and Phillips Set
Overall Length 7"
70035-12C 12 pack of Catalog No. 70035
70037
Long-Shank Slotted
and Phillips Set.
Overall length 11"
Bit Included
3/16" and 9/32" Slotted No.1
and No. 2 Phillips T15 Torx®
No. 2 Phillips
9/32" Slotted, 5/32" Clutch Head
No. 1 and No. 2 Square Recess
T15, T20, T25, T27
and T30 Torx®
3/16" and 9/32" Slotted and No.1
and No. 2 Phillips
3/16" and 9/32" Slotted No. 1
and No. 2 Phillips
Reversible-Blade Screwdrivers
Reversible-blade screwdrivers offer the convenience of two different-size
tips in a single tool. Blade inserts and locks into full size handle with exclusive Comfordome® top. Choose the blade combination that meets your
requirements–two slotted tips, two Phillips tips or one of each.
Cat.
Overall
No.
Type and Size of Blade (in)
Length (in)
DU2
No. 1 Phillips x 3/16" Slotted tips
6-3/16
DUH4
No. 2 Phillips x 1/4" Slotted tips
6-9/16
DU5
No. 2 Phillips x 1/4" Slotted tips (Stubby)
4-7/8
DUP12
No. 1 Phillips x No. 2 Phillips tips
6-9/16
Replacement Blades Only, for Reversible Screwdrivers
70179
Blade only, for DU2: No.1 Phillips x 3/16" Slotted Tips
70180
Blade only, for DUH4: No. 2 Phillips x 1/4" Slotted Tips
Standard-Handle, TORX Tip
Combines the exclusive Vaco Comfordome handle
with the finest TORX® blade.
Cat.
No.
70808
70809
70815
70820
Cat. No.
70425
Comfortable handle stores
extra bits. Just unscrew cap.
TORX
Shank
Overall
T8
4
7-5/8
T10
4
7-5/8
T15
4
7-5/8
T20
4
7-5/8
5-in-1 and 10-in-1 Screwdriver/Nut Driver
Ratcheting Screwdriver Sets
Three screwdriver sets, each containing a unique 3-position ratcheting
screwdriver plus an assortment of blade types and/or sizes. These screwdrivers drive the toughest screws with minimum effort. Each features a
comfortable handle with an easy-to-open snap top. Interchangeable bits
store inside the handle for a quick access. Shaft length with bits is 4-1/2".
Overall length is 9-3/4".
Cat. No.
32473
32473-12C
32474
32475
Comfortable handle stores
extra bits. Easy open snap
cap is permanently attached.
Description
Bits Included
Slotted and Phillips-tip set 3/16" and 9/32" Slotted plus No.1 and No. 2 Phillips.
12 pack of Cat. No. 32473 screwdriver set.
Slotted, Phillips and
3/16" and 9/32" Slotted plus No.1 and No. 2 Phillips
Torx-tip set
plus T15 Torx tips.
Torx-tip set
T15, T20, T25 and T30 Torx.
OA-Length (in)
32476 5-in-1 Screwdriver/Nut Driver
7-3/8
32477 10-in-1 Screwdriver/Nut Driver
7-3/8
Qty.
Additional or Replacement Blades for 5-in-1
32478 #1 Phillips – 3/16" Slotted
Contains 1 Bit
Contains 1 Bit
Additional or Replacement Blades for 10-in-1
Contains 2 Bits
Contains 2 Bits
32484 #1 Square – #2 Square
Contains 2 Bits
32485 #10 Torx® – #15 Torx®
Contains 2 Bits
WWW.HANESSUPPLY.COM
19
Hand Tools
3-position ratcheting
system for forward,
lock or reverse driving.
with Cushion-Grip Handle
Features of 5-in-1 (32476):
5/16" Nut Driver,
#2 Phillips, 9/32" Slotted,
#1 Phillips, 3/16" Slotted.
End of handle is marked
32476
to quickly identify tool.
Features of 10-in-1 (32477):
5/16" Nut Driver, 1/4" Nut Driver, #2 Phillips, 1/4" Slotted, #1 Phillips,
3/16" Slotted, #15 Torx®, #10 Torx®, #1 Square, #2 Square.
End of handle is marked to quickly identify tool.
19 -71
Albany/NE Division:
518.438.0139
Rochester Division:
585.235.0160
FAX:
FAX:
FAX:
716.826.4412
518.438.5343
585.235.0229
CCISCO: 843.238.1338
FAX:
843.238.8337
Hand Tools
Klein Tools
Slotted Screw-Holding Screwdrivers
Split-blade screw-holding driver wedges into screw slot. Positive gripping
action holds, starts and drives slotted screws in awkward, hard-to-reach
places.
No.
K21*
1/8 x 3
5-1/4
K23
1/8 x 3
5-1/4
K28
1/8 x 8
10-1/4
K34†
3/16 x 4
7-3/4
K36†
3/16 x 6
9-3/4
K38†
3/16 x 8
11-3/4
K44
1/4 x 4
8-1/4
K46
1/4 x 6
10-1/4
K48
1/4 x 8
12-1/4
Positive gripping action.
Tough, durable
spring-steel blade.
* Precision blade for use with small precision screw. Blade thickness of .028" expanding
to .045".
† Blade thickness of .043" expanding to .085".
NOTE: K21 and K23 have pocket clips.
CUSHION-GRIP NUT DRIVERS
Individual Cushion-Grip, Hollow-Shaft Nut Drivers
The finest nut drivers made. Rugged and solid from end to end. Amber
plastic handle with Cushion-Grip is comfortable, never hurts the hand; permits the use of maximum turning power without discomfort. Handle caps
are color-coded for easy size identification. Strong hex-head drives nuts
and socket screws. Full hollow-shaft chrome-plated shank permits turning
nuts on long screws. In nine individual sizes or a 7-piece set.
Cat.
No.
630-3/16
630-1/4
630-5/16
630-11/32
630-3/8
630-7/16
630-1/2
630-9/16
630-5/8
Color
Code
Black
Red
Yellow
Green
Blue
Brown
Red
Orange
Yellow
Hex
Size (in)
3/16
1/4
5/16
11/32
3/8
7/16
1/2
9/16
5/8
Shank
Length (in)
3
3
3
3
3
3
3
4
4
CAUTION: Plastic-dipped blades, shanks,
or other tool parts are NOT intended for
Hand Tools
Handle
Hex
Overall
Color Size (in) Length (in)
Amber
5/32
6-1/2
Black
3/16
6-5/8
Brown
7/32
6-5/8
Red
1/4
6-5/8
Orange
9/32
6-5/8
Amber
5/16
6-5/8
Green
11/32
6-5/8
Blue
3/8
6-5/8
Brown
7/16
7
Red
1/2
7
Individual 4-Inch-Shaft Nut Drivers
Cat.
No.
S18
S20
Handle
Hex
Overall
Red
9/16
8
Red
5/8
8
19 -72
Handle
Hex
Overall
Color Size (mm) Length (in)
Black
4
6-5/8
Black
4.5
6-5/8
Black
5
6-5/8
Black
5.5
6-5/8
Black
6
6-5/8
Black
7
6-5/8
Black
8
6-5/8
Black
9
6-5/8
Black
10
7
Black
11
7
SCRATCH AWLS
Plastic-Handle Awl
A rugged, heavy-duty tool for scribing, piercing and punching. Hard pointed, bolstered shaft. Flanged shaft forms a strong, solid anchor in plastic
handle. Comfortable handle lets you apply maximum gripping power.
Blade
Overall
3-1/2
7-1/4
Cat.
Handle Size Dia. Blade Size Dia.
No.
x Length (in)
x Length (in)
70455C
1-1/4 x 2-1/4
1/4 x 3-3/4
Spring Tool
Spring tool installs or removers small-diameter coil
springs on motors, brake shoes, headlights, relays,
solenoids and hundreds of other applications. Unique
C-tip prevents spring slippage.
19
Cat.
No.
70204
70245
70205
70255
70206
70207
70208
70209
70210
70211
Stubby handle scratch awl pierces and starts holes, scribes in metal,
scores and cleans. Tapered blade is made of top-grade alloy-steel. Blade
is heat-treated and tempered for added strength and can be resharpened.
Stubby handle allows use in confined areas. Overall Length is 6".
PLASTIC-HANDLE HOLLOW-SHAFT NUT
DRIVERS
Cat.
No.
S5
S6
S7
S8
S9
S10
S11
S12
S14
S16
Individual 3-Inch-Shaft Metric Nut Drivers
Scratch-Awl
Entire shank coated with yellow plastic material. Amber plastic handle
with comfortable Klein Cushion-Grip. Handle-ends color-coded for size
identification. Hex head drives nut and socket screws. Eight sizes. Hollowshaft permits turning nuts on long screws.
Color
Hex
Shank
Coded Size (in) Length (in)
Black
3/16
3
Red
1/4
3
Yellow
5/16
3
Blue
3/8
3
Brown
7/16
3
Red
1/2
3
Orange
9/16
4
Yellow
5/8
4
Cat. Handle
Hex
Overall
No.
S66
Black
3/16
9-5/8
S86
Red
1/4
9-5/8
S106 Amber
5/16
9-5/8
S116 Green
11/32
9-5/8
S126 Blue
3/8
9-5/8
S146 Brown
7/16
10
S166 Red
1/2
10
Cat
No.
37513
Individual Hollow-Shaft Nut Drivers with
Plastic-Dipped Shank
Cat.
No.
640-3/16
640-1/4
640-5/16
640-3/8
640-7/16
640-1/2
640-9/16
640-5/8
Cat.
No.
ST49
Overall
Length (in)
7-1/2
SHEET METAL TOOLS
WARNING: Plastic-dipped or slip-on plastic handles are not intended for protection.
Do NOT use near live electrical circuits. Also, work safely with all hand and power
tools, wear approved eye protection.
Straight and Offset Hand Seamers
Bend and flatten sheet metal and non-ferrous metals easily with these
rugged hand seamers. Straight-handle model used for most general applications, offset-handle model for use in overhead or confined areas. The
compound-leverage design gives accurate control and powerful
grip for making quick, permanent, tight fitting seams. The
3-1/4" wide drop-forged; high-impact steel jaws are
marked in 1/4" increments for precise bending measurements. Hardened steel handles
are covered with blue vinyl grips with handle
86553
stops for added comfort and easy operation.
The all-steel construction and nickel-plated
hardware provide long life and durability.
86553
Straight Hand Seamer, 8" overall length
86552
Offset Hand Seamer, 8" overall length
WWW.HANESSUPPLY.COM
86552
Albany/NE Division:
518.438.0139
Rochester Division:
585.235.0160
FAX:
FAX:
FAX:
716.826.4412
518.438.5343
585.235.0229
CCISCO: 843.238.1338
FAX:
843.238.8337
Hand Tools
Klein Tools
Hand Notcher
2-Blade Pocket Knife
Make clean, 30-degree “V”-shaped cuts in sheet metal quickly
and easily with this powerful hand notcher. The drop-forged,
high-impact steel jaw has a maximum throat of 13/16" and a
hook design for easy notching of corners and take-off
tabs without slippage. All steel construction with nickelplate and black-oxide finish provide long life and
durability. Blue vinyl grips with handle stops for
added comfort and easy operation.
Curved-sheepfoot slitting blade 2-3/8" long and
screwdriver-tip blade 2-1/2" long. Screwdriver blade
locks open.
86551
Hand Notcher, 8" overall length
Special insulation-slitting blade 1-1/2" long, spearpoint blade
2-1/2" long and screwdriver-tip blade 2-1/2" long. Both
slitting blade and screwdriver blade lock open.
5-Blade Crimper
This 5-Blade Crimper produces factory-precision indentations in stove pipe
and round duct with just a squeeze. The compound leverage mechanism, heavy-duty jaw/handle linkage, and closing stop provide
easy operation and consistent crimps for virtually leak proof
connections. The spring-actuated, narrow-opening handles
are covered with blue vinyl grips and have carefully
placed hand stops for extra comfort. Hardened
steel construction and nickel plating provide long life and consistent crimp profile.
Pocket Knives
These heavy-duty knives all have blades of the finest cutlery steel, tough
and carefully tempered to hold their edge. Most of these knives feature
strongly-riveted construction with large shackles, steel and brass bodies
with special, super-tough plastic handles that won’t crack or chip. Handles
are textured for better gripping. All screwdriver-tip blades also have a cutting edge; certain blades lock open automatically for more efficient use.
2-Blade Pocket Knives
Standard spear point blade 2-1/2" long and screwdriver-tip
blade 2-1/2" long. Screwdriver blade locks open. Blades
available in standard carbon steel or stainless steel.
Length Closed (in)
3-3/4" with carbon-steel blades.
Same as No. 1550-2 above,
except with stainless steel blades.
Coping-type blade 2-1/4" long. Compact, lightweight–ideal
for skinning small wire and cable. Blade locks open.
Length Closed (in)
3-1/4"
Extra-long curved sheepfoot slitting-blade 2-5/8" long.
Ideal for heavy-duty line work. Blade locks open. Cutting
blade available in standard carbon steel or stainless steel.
Coping-Type Pocket Knife
Big, carbon-steel coping-type blade 3" long.
Man-sized, woodgrain plastic handle.
Blade locks open.
Cat. No.
1550-14
Length Closed (in)
4-1/4"
Special Purpose Knifes
Cable-Sheath Splitting Knife
Cat.
No.
1515-S
Overall
Length (in)
7-3/8"
Blade
Length (in)
2-19/32"
Heavy-Duty Cable Sheath Splitting Knife,
Bell System Type
Special insulation-slitting blade 1-1/2" long and curved sheepfoot skinning blade 2-3/8" long. Slitting blade locks open.
Cat. No. Length Closed (in)
1550-10
3-3/4"
Slitting Pocket Knives
A compact, lightweight knife for opening lead cables. Strong, carefully
tempered blade of the finest cutlery steel. Sharp, chisel-shaped edge.
Hammer head on back. Plastic-dipped handle for comfort. Leather guard
available. No. 5574S.
Coping-Type Pocket Knife
Cat. No.
1550-11
1550-9 3-3/4"
1550-4 4"
1550-44 Same as No. 1550-4 above,
except stainless steel blade.
86550
5-Blade Crimper
Cat. No.
1550-2
1550-42
1550-7 3-3/4"
A big, heavy-duty knife for splitting cable sheaths. Rugged carefully
tempered cutlery-steel blade. Keen, chisel-shaped edge. Plastic-dipped
handle. Leather guard available, No. 5574L.
Cat.
No.
1515-1
Overall
Length (in)
8-3/4"
Blade
Length (in)
4-1/2"
Lineman’s Plastic-Handle Skinning Knife
Coping-Type Pocket Knives
Coping-type blade 2-1/4" long. Compact, lightweight–
ideal for skinning small wire and cable. Cutting blade
available in standard carbon steel or stainless steel.
Length Closed (in)
3-1/4"
Same as No. 1550-5 above,
except stainless steel blade.
Curved-sheepfoot skinning blade 2-3/8" long, standard spearpoint blade 2-1/2" long and screwdrivertip blade 2-1/2" long. Screwdriver blade locks open.
1550-6 3-3/4"
Cat.
Length Less
Blade
No.
Ring (in)
Length (in)
1570-3
8"
3"
157 0-3LR As above without handle ring.
Cable-Splicer’s Knife
Special-purpose short blade with comfortable, full-sized, heavy-duty handle. Coping-type blade made of the finest cutlery steel, tough and carefully
tempered to hold its edge. Non-slip handle is plastic-dipped for comfort.
Cat.
Overall
Blade
No.
44200
6-1/4"
1-3/4"
WWW.HANESSUPPLY.COM
19
Hand Tools
Cat. No.
1550-5
1550-45
Built extra strong for line work. Tough, tempered-steel blade with the blade
background flat for scrapping copper wire. Big, rugged, molded-on plastic
handle provides a firm, comfortable grip. Large finger guard helps keep
fingers away from blade. With or without handle ring. Fits lineman’s knife
holder No. 5163.
19 -73
Albany/NE Division:
518.438.0139
Rochester Division:
585.235.0160
FAX:
FAX:
FAX:
716.826.4412
518.438.5343
585.235.0229
CCISCO: 843.238.1338
FAX:
843.238.8337
Hand Tools
Klein Tools
Cable Splicer’s Kit
Complete, compact splicing kit contains cable-splicer’s knife No. 44200,
electrician’s scissors with stripping notches No. 2100-7, and slotted leather
holder No. 5187 for belts up to 2" wide.
Cat. No. Description and Nominal Size
46037
Complete Cable-Splicer’s Kit
Holder only, for Scissors and Splicer’s Knife
5187
Leather holder for electrician’s scissors
No. 2100-5 or No. 2100-7 and No. 44200
cable splicer’s knife. Slotted to fit belts up
to 2" wide. 2-1/8" x 7-1/2"
5187T
Same as above, except with tunnel loop for
belts up to 2" wide. Not available in
No. 46037 Cable Splicer’s Kit.
Insulated High-Leverage Diagonal Cutters
with Angled Head
High-leverage, heavy-duty design
with angled head for easier work
in confined areas.
D2000-48-INS
Cat. No.
Description
D248-8-INS
Nominal 8" length insulated, angled-head diagonal cutters.
D2000-48-INS Same as D248-8-INS but with ultra-durable “2000 Series”
cutting knives for ACSR, bolts, nails and most hardened wire.
Insulated Heavy-Duty Diagonal Cutters with Tapered Nose
Diagonal cutters with standard-bevel cutting knives.
INSULATED SIDE-CUTTING PLIERS
Klein’s insulated side-cutting pliers are available in two styles. They are:
1) the standard duty pliers, which have long been recognized for their
premium quality design and rugged, precision construction, and
2) the Innovative Klein “2000 SERIES” pliers with super-tough cutting
knives, specially designed and heat-treated to cut bolts, nails, ACSR and
most hardened wire without damage. The two-layer insulation on all pliers
listed results in a 1000-volt rating for the tools’ use. They comply with IEC
900 standards for hand tools.
Insulated High-Leverage NE-Type Side Cutters
High-leverage design provides
46% greater cutting and gripping
power than regular side cutters of
the same size. Has smooth,
streamlined nose with knurled
jaws.
Cat. No.
D213-8NE-INS
D213-9NE-INS
D2000-9NE-INS
D213-9NE-INS
Description
Nominal 8-1/2" length insulated side cutters.
Same as D213-9NE-INS, except with ultra-durable “2000 Series” cutting knives.
Insulated High-Leverage NE-Type Side Cutters with
Crimping Die
Provides the same high-leverage
gripping and cutting power as
Klein’s D213-9NE-INS but has
crimping die at the hinge for
crimping sleeve connectors.
INSULATED LONG-NOSE PLIERS
Insulated Heavy-Duty Long-Nose with Side Cutters
Extra-heavy design for easier
and more comfortable cutting.
Available with or without
skinning hole.
This insulted cable cutter permits precise, one-hand shearing of copper
and multi-strand cable and wire such as 24-gauge, 100-pair telephone
cable. Cuts clean without compression or causing frayed ends. Has heattreated, high-carbon steel shearing edges and drop-forged body with 3/8”
case-hardened rivet. Not designed
for cutting steel or ACSR.
Description
INSULATED DIAGONAL-CUTTING PLIERS
Hand Tools
Cat.
Nominal
Max.
No.
Length (in) Cap. (in)
D502-10-INS
10"
1-3/4"
D502-12-INS
12"
2-1/8"
Insulated Compact Cable Cutter
Provides 46% greater mechanical
advantage than regular side
cutters of the same size, with
knurled front jaws.
Klein’s insulated diagonal-cutting pliers are available in two styles. They
are: 1) the standard duty pliers, which have long been recognized for their
premium quality design and rugged, precision construction, and 2) the
innovative Klein “2000 Series” pliers with super-tough cutting knives, specially designed and heat-treated to cut bolts, nails, ACSR and most hardened wire without damage. The two-layer insulation on all pliers listed
results in a 1000-volt rating for the tools’ use. They comply with IEC 900
standards for hand tools.
Insulated High-Leverage Diagonal Cutters
High-leverage design with standardbevel cutting knives. Provides 36%
greater mechanical cutting and
gripping advantage than regular
diagonal cutters of the same size.
Cat.
Nominal
No.
Length (in)
63055-INS
8"
INSULATED CRIMPING TOOL AND WIRE
STRIPPERS
Insulated Crimping Tool for Insulated and Non-Insulated
Terminals and Connectors
Insulated crimping tool with thin nose to allow work in confined space.
Crimping dies clearly marked for insulated or non-insulated solderless
terminals and connectors. Accommodates wire from No.10 to 22 AWG.
Has wire cutter in nose.
Cat.
Nominal
No.
Length (in)
1005-INS
9-3/4"
Cat. No.
Description
D228-8-INS
Nominal 8" length insulated regular-head diagonal cutters.
D2000-28-INS Same as D228-8-INS, but with ultra-durable “2000 Series”
cutting knives for ACSR, bolts, nails and most hardened wire.
19 -74
Jaws are positioned and locked into place by engaging tongue in proper
groove. Series of channels provides wide range of jaw openings. Jaws
cannot slip even under heavy pressure. These insulated pump pliers come
in two sizes and two different jaw
capacities.
Insulated Cable Cutters
Insulated High-Leverage Side Cutters with
Toothed Pipe-Grip Jaws
19
Insulated Pump Pliers
Cat. No.
Description
D203-8-INS Nominal 8-5/16" length insulated long-nose pliers.
D203-8N-INS Same as D203-8-INS, but with skinning hole for No. 12 B&S insulated wire.
Cat. No.
Description
D213-9NE-CR-INS Nominal 9-1/4" length insulated side cutters with crimping die.
Cat. No.
D12211-INS
Cat. No.
Description
D220-7-INS Nominal 7-11/16" length
insulated diagonal cutters
with one-inch jaws for
reaching into confined spaces.
D228-8-INS
WWW.HANESSUPPLY.COM
Albany/NE Division:
518.438.0139
Rochester Division:
585.235.0160
FAX:
FAX:
FAX:
716.826.4412
518.438.5343
585.235.0229
CCISCO: 843.238.1338
FAX:
843.238.8337
Hand Tools
Klein Tools
Insulated Wire Stripper-Cutter
Compact, lightweight insulated stripper gauges, cuts, strips and loops wire.
Spring-loaded, self-opening action. Flat design, easy to store and carry.
Narrow nose to fit tight places. Strong,
hardened steel with precision-ground
stripping holes for quick, clean, even
stripping. Clear gauge markings on
both sides.
Cat. No.
11045-INS
Strips AWG Gauges
No. 10, 12, 14, 16, 18 solid wire
Insulated Cushion-Grip Screwdrivers
Klein screwdrivers give professional extra-quality features that have made
the Klein name famous for hand tools-features that assure greater convenience, comfort and efficiency in use, plus exceptional strength and durability.
All Klein drivers are made of the highest quality tempered steel, carefully
heat-treated for maximum strength. Shafts will not bend for twist in normal
use. Shafts have integral flanges that provide an extra-strong, torque-proof
anchor in the handle. Strong, durable black tips are precision forged and
ground with square edges to fit screw openings securely. They resist slippage and provide positive turning action.
Insulated Cushion-Grip screwdrivers feature super-comfortable, sure-grip
handles on top-quality tools for the professional.
Insulated screwdrivers with strong, durable black tips that are precision
forged and ground with square edges to fit screw openings securely and
to resist slippage.
Tips are profilated to provide a more consistent geometric symmetry
than conventional Phillips-tip screwdrivers for more accurate fit and
torque without slippage.
For Screw
Sizes
5, 6, 7
8, 9, 10
12 and 14
Hacksaws
Heavy-Duty professional quality, yet light enough for overhead cutting or
use from a ladder or scaffold. Strong tubular steel frame with cast-aluminum handles, comfortable molded plastic grip insert. Pivot action front
end and large knurled thumbscrew at handle for easy blade tension adjustment. Blade cuts fully through to a flat surface. Removable retaining pins
permit quick blade conversion to horizontal position for full-flush cutting.
Storage chamber for extra
blades. Supplied with blade.
Cat.
Overall
Blade
No.
701-AL
16-1/4
12
666-INS
Economical and exceptionally light in weight, but made to professional
standards. Trim outlined compact design make it easy to use in confined
spaces. Lighter weight and good balance make it less tiring for overhead
work. Tubular steel frame, cast-aluminum handles with comfortable plastic
grip inserts. Blade cuts fully through to a flat surface. Wing nut provides
simple, direct blade tension adjustment and easy conversion to horizontal
position for nearly flush cutting. Supplied with blade.
Cat.
Overall
Blade
No.
700-12
16-1/2
12
WWW.HANESSUPPLY.COM
19
Hand Tools
Color
Code
Green
Red
Black
Sweep (in)
10
12
“The Industrial” Hacksaw
Round shank with special tip for square-recess screws. Handle ends are
color-coded for easy selection of correct tips for screw sizes 5 through 14.
Shank length is 8".
Point
Size
No. 1
No. 2
No. 3
Bit Brace
603-6-INS
Insulated Round-Shank, Square-Recess Tip Screwdrivers
Cat.
No.
665-INS
666-INS
667-INS
Extra-strong construction for line work. Tough, tempered-steel blade.
Big, rugged insulated handle provides a firm, comfortable grip and
has large finger guard.
Light-Weight Hacksaw
601-4-INS
Insulated Round-Shank, Special Profilated® Phillips-Tip
Screwdrivers
Point
Shank
Overall
No. 1
3
6-3/4
No. 2
4
8-5/16
No. 3
6
11
Color
Hex
Shank
Code Size (in) Length (in)
Black
3/16
3
Red
1/4
3
Yellow
5/16
3
Green
11/32
3
Blue
3/8
3
Brown
7/16
3
Red
1/2
3
Orange
9/16
4
Yellow
5/8
4
Insulated Lineman’s Skinning Knife
Cat. No.
64004
64005
Perfect for electrical, telephone and work in recessed holes and other tight
spaces.
Cat.
No.
603-3-INS
603-4-INS
603-6-INS
Cat.
No.
630-3/16-INS
630-1/4-INS
630-5/16-INS
630-11/32-INS
630-3/8-INS
630-7/16-INS
630-1/2-INS
630-9/16-INS
630-5/8-INS
Strong, nickel-plated steel body with smooth, tough Cycolac handle and
head. Ball-bearing, steel-reinforced head. Positive ratchet action. Springloaded jaws hold square taper-shank
bits. Small and medium size drills.
Chuck housing finely cross knurled.
602-6-INS
Insulated Round-Shank, Cabinet-Tip,
Cushion-Grip Screwdrivers
Cat.
No.
601-4-INS
3/16 x 4
7-3/4
601-6-INS
3/16 x 6
9-3/4
601-8-INS
3/16 x 8
11-3/4
The finest nut drivers made. Amber plastic handle with Cushion-Grip is
comfortable, never hurts the hand; permits the use of maximum turning
power without discomfort. Handle caps are color-coded for easy size
identification. Strong hex-head drives nuts and socket screws. Insulated
full hollow-shaft chrome-plated shank permits turning nuts on long screws.
In nine individual sizes.
Cat.
Nominal Overall
Blade
No.
Length (in)
Length (in)
1570-3LR-INS
7-3/4
2-1/2
Insulated Heavy-Duty Round-Shank,
Keystone-Tip Screwdrivers
Cat.
No.
602-4-INS
1/4 x 4
8-11/32
602-6-INS
5/16 x 6
10-15/16
602-10-INS
3/8 x 10
15-7/16
Insulated Individual Cushion-Grip,
Hollow-Shaft Nut Drivers
19 -75
Albany/NE Division:
518.438.0139
Rochester Division:
585.235.0160
FAX:
FAX:
FAX:
716.826.4412
518.438.5343
585.235.0229
CCISCO: 843.238.1338
FAX:
843.238.8337
Hand Tools
Klein Tools
“Dual-Purpose” Hacksaw
Soft-Face Dead-Blow Hammers
Powerful, efficient cutting action. Handle design and rigid steel box-frame
concentrate force at the blade-edge. Easy, fingertip-tensioning adjustment
for longer blade life and straight, clean cuts. Simple, direct screw-pivot in
handle puts full, even tension on all blades. Tough, die-cast aluminum handle and front end. Excellent design for two-hand sawing. Blade cuts fully
through to a flat surface; converts easily from vertical to 45-degree angle.
Front-end holds blade for use as jab saw. Box-frame stores extra blades.
Supplied with No. 1200BI Golden Tri-Cut blade.
Steel, shot-loaded hammers encased in thick high-visibility orange
urethane. Non-sparking; no exposed metal. Soft faces yield but won’t
mar most surfaces. Hundreds of metal shot follow each impact to prevent
rebounding and control the hammer. Dead-blow action permits maximum
striking force, increases accuracy, makes work easier and helps guard
against accidents. Available in both standard-head and slim-head designs.
It’s a jab saw, too.
Setscrew holds
blade.
Built-in pins for
easier, 45O full-flush
cutting.
Pivot-lock tensions
all blades easily &
correctly
Cat.
No.
701-S
Overall
Length (in)
16
Blade
Length (in)
12
WARNING: These hammers are not intended for use on any liquid oxygen application
or in extreme temperatures. Such misuse could result in ignition or rupture of hammer
material. Useful temperature range is 30-degrees F to 120-degrees F.
Cat.
Hammer Face
Head
Overall
No.
Wt. (oz) Dia. (in) Length (in) Length (in)
Standard-Head Design. Two weights and two lengths.
810-32
22
2
4-1/4
12-3/4
810-48
42
2-1/2
4-3/4
14
Slim-Head Design. Designed for assembly and
repair work in confined areas.
811-32
Extra blades store
in frame
22
1-3/4
5-1/4
13
810-32
811-32
Conduit Tools
Conduit-Fitting and Reaming Screwdriver
Hammers
Electrician’s Straight-Claw Hammer
Correctly balanced and designed specifically for use in electrical work.
Extra-long neck, straight-claw and narrow striking face is ideal for reaching
into outlet boxes and other tight areas. Polished, drop-forged tempered-steel
head is bonded to high-strength, shock-absorbent fiberglass shaft. Highly
durable plastic-alloy jacket protects neck from fraying and splintering. Comfortable, perforated
neoprene grip bonded to handle.
Cat.
No.
807-18
Head
Overall
Wt. (oz) Length (in)
18
15
As a conduit-fitting screwdriver, the hooded-blade design keeps the tip
from slipping out of screws, especially overhead. As a conduit reamer,
it reams and smooths 1/2", 3/4" and 1" thin-wall conduit ends to protect
wire and permit correct installation of fittings. It reams both the inside and
outside at the same time, and has a hard anodized finish to resist wear.
The Cushion-Grip handle helps resist slippage for extra turning power
and comfort. Klein’s patented Tip-Ident® marking system, with its vividwhite symbol permanently inscribed on the end of the handle allows for
easy tool selection. The shaft and tip are made of high-quality tempered
steel, heat-treated for maximum strength. Shaft has internal flanges that
provide an extra-strong, torque-resistant anchor, deep in the handle.
Cat.
Shank-Tip
Shank
Overall
No.
Width (in) Length (in) Length (in)
85188
3/8
3
7-3/8
19351 Conduit Reamer Replacement Blade
Heavy-Duty Curved-Claw Hammer
“PAL” Thin-Wall Conduit Reamer
Curved claw gives maximum nail-pulling leverage. Polished drop-forged,
tempered steel head. High-strength fiberglass shaft keeps head tight.
Durable plastic-alloy jacket protects neck from fraying and splintering.
Comfortable, perforated neoprene
grip bonded to handle.
Locks onto screwdriver, reams and smooths 1/2", 3/4" and 1" thin-wall
conduit ends to protect wire and permit correct installation of fittings.
Reams inside and outside at the same time. Two set-screws hold
“PAL” tight on round or square screwdriver shanks. Reamer can be left
on screwdriver for normal use. Fits most Klein screwdrivers. Screwdriver
not included. Not for use on power tools. Replaceable hardened springsteel blade available.
Cat.
Head
Overall
No.
818-16
16
13
818-20
20
13
19350
“PAL” Conduit Reamer
19351
Replacement Blade
Heavy-Duty Straight-Claw Hammer
Regular straight-claw design with polished drop-forged, tempered-steel
head. High strength fiberglass shaft absorbs shock and keeps tempered
steel head tight. Durable plastic-alloy jacketing protects neck from fraying
and splintering. Comfortable, perforated neoprene grip bonded to handle.
Cat.
No.
808-16
808-20
Hand Tools
19
Head
Overall
16
13
20
13
Lineman’s Double-Face Hammer
Designed for pole-line work. Rugged and well balanced, with the weight to
drive lag bolts. Drop-forged, tempered-steel head is only 3-3/4" long for
use in tight areas. Identical faces with 1-3/4" round-crown driving surface
and beveled edges. High-strength fiberglass handle has a plastic-alloy
jacket to prevent neck from fraying and splintering. Comfortable, perforated
neoprene grip bonded to handle.
Cat.
No.
809-36
Head
Overall
36
15
19 -76
Conduit Locknut and Reaming Pliers
This versatile new tool tightens conduit locknuts, fittings and caps. It also
reams both the inside and outside of conduit. The special long-nose jaw
design makes tightening locknuts faster and easier on electrical outlet
boxes and in hard-to-reach areas where conduit fittings are used. The tool
tightens conduit-fitting locknuts on 1/2" and 3/4" EMT thin-wall and rigidwall conduit. It also tightens 3/8", 1/2" and 3/4" liquidtight conduit fittings.
In addition, the tool handles conduit-fitting bodies and caps on 1/2" EMT
and rigid conduit fittings, as well as 3/8" and 1/2" liquid tight fittings.
To protect wire and permit correct installation of fittings, this tool quickly
reams and smooths the inside of EMT thin wall or rigid conduit in sizes up
to 3/4". It also reams the outside of EMT thin wall up to 3/4" and rigid conduit up to 1/2".
The knurled jaws at the nose tip are used for pulling wire or fish tape.
The tool is made of high-quality, drop-forged tempered steel that is heattreated for maximum strength, and
has a combination polished and
black finish. Plastic-dipped handles
provide extra comfort.
Cat.
Overall
Jaw
Jaw
Jaw
Point
No.
Length (in) Length (in) Width (in) Thkns (in) Thkns (in)
D333-8
7-3/4
1-5/8
15/16
1/2
3/16
WWW.HANESSUPPLY.COM
Albany/NE Division:
518.438.0139
Rochester Division:
585.235.0160
FAX:
FAX:
FAX:
716.826.4412
518.438.5343
585.235.0229
CCISCO: 843.238.1338
FAX:
843.238.8337
Hand Tools
Klein Tools
Klein-Benfield® Short-Radius Combination Bender
PVC Cutters
Ratcheting PVC-Cutters
Makes clean burr-free cuts through PVC. Ratchet-action design for maximum cutting power with very little effort. No. 50500 cuts 1/4" through 1-1/4"
PVC. 9" long, it is easy to carry in pocket or pouch. No. 50501 is a highleverage ratchet-action cutter for 1/2" through 2" PVC. It has a pipe supporting-plate that adjusts to the PVC
size. It reduces pipe deformation and
the possibility of the pipe cracking.
Special heat-treated blades assure
50501
long life.
Cat.
Length
Capacity
No.
(in)
(in)
50500
9
1/2 – 1-1/4
50501
16-1/2
1/2 – 2
50503 Replacement blade for No. 50500
50504 Replacement blade for No. 50501
50500
This combination short-radius bender gives you two tools in
one – eliminates need to carry an extra size. Simply
select one of the two grooves made for the conduit size and type you want to bend.
Cat. No. Conduit Size, Type and Radius
51209
1/2" EMT, 3" radius
3/4" EMT and 1/2” rigid, 4" radius
Klein-Benfield® Stubber Hickeys
Produces bends with various radii, allowing perfect concentricity for
parallel conduit runs. Deep-wall side-support and unique groove-contour
for bending EMT, Rigid and IMC conduit.
Cat.
No.
51230
51231
51232
51233
For Thinwall (EMT)
Conduit (in)
1/2
3/4
1
1-1/4
For Rigid & IMC
Conduit (in)
–
1/2
3/4
1
Conduit Benders and Hickeys
Klein-Benfield® Plumb-Bob Hickeys for Rigid Conduit
Klein-Benfield® Benders
Complete with Handles
Each model bends two conduit sizes – reduces need for extra hickey sizes
and each has automatic angle-indicator to
show the exact degree of the bend.
Three bender/handle combinations cover
a range of bending requirements for 1/2"
to 1" EMT and 1/2" or 3/4" rigid conduit.
The benders are described at the top of
the next column on this page; the handles
on the following page.
Cat. No.
51227
51228
For Rigid Conduit
1/2" and 3/4" (one shot)
1" and 1-1/4" (two shot)
Conduit Bender and Hickey Handles
Cat. No.
51211
51212
51213
Description
No. 51201 Bender complete with No. 50473 handle for 1/2" EMT
No. 51202 Bender complete with No. 50473 handle for 3/4" EMT or 1/2" rigid conduit
No. 51203 Bender complete with No. 50474 handle for 1" EMT or 3/4" rigid conduit
Klein-Benfield® Benders
Fixed-radius, one-sweep design permits pinpoint precision even by inexperienced users. Has easy-to-read cast-in benchmark symbols and offsetdegree scales on opposite sides, plus a countersunk and painted arrow
and star to indicate beginning and back-of-bend locations. No. 51201 for
1/2" EMT only, also has 45-degree bend center-marker and cast-in offset
formula in addition to the multipliers.
Cat.
No.
51201
51202
51203
For Thinwall
For Rigid
(EMT) Conduit (in) Conduit (in)
1/2
–
3/4
1/2
1
3/4
Bender and Hickey Handles
Four sizes and four lengths provide the proper leverage for use with all
Klein-Benfield benders and hickeys. High-strength galvanized steel handles are threaded at one end. Informative bending guide on every handle.
Comfortable enlarged handle at gripping area.
Cat. No. IPS Dia. x Lgth. (in)
50473
3/4 x 38
50474
1 x 44
50475
1-1/4 x 54
50476
1-1/2 x 60
Fits Klein-Benfield Benders
51201, 51202, 51209, 51216, 51230 & 51231
51203, 51205, 51217, 51227 & 51232
51206 & 51233
51228
51201
Fish Tapes
®
Klein-Flex handle is Orange
Klein-Lite® handle is Blue
Flat Steel handle is Black
Klein-Benfield® Power-Jack® Benders
Has cast-in calibrations plus a two-position booster-step that makes
it possible to bend up to 1-1/4" EMT and 1" Rigid and IMC without
expensive power tools. Eliminates the
need for costly, performed elbows.
Cat. For Thinwall (EMT) For Rigid For IMC
No.
Conduit (in)
Conduit (in) (in)
51205
1
3/4
–
51206
1-1/4
1
1
Klein-Benfield® Rigid and IMC Benders
• A winder Reel Handle
So Rugged You Can
Really Grip-ItTM
• Withstand rugged use
and harsh handling on
the job site.
• Handle prevents kinking
or jamming when
retracting the tape.
• Handle base wraps
around 180° of the real.
• Impact resistant plastic.
Reinforcing
ribs, molded
into the handle
Plenty of
room for a
gloved hand
Comfortable,
slip resistant
gripping surface.
Enlarged
guide slot
makes dispensing fast
and smooth
Four
viewpoints
to see
remaining
tape
Extra-strong benders especially designed and reinforced for IMC and Rigid
only. They make space-saving bends to the smallest radius allowed by the
NEC. Cast-in indicators simplify
bending and assure accuracy.
For Rigid & IMC
Conduit (in)
1/2
3/4
Radius
(in)
4
5
51216
Flat-Steel Fish Tape with Grip-ItTM Handle in Winder Reel
• Highly-durable tempered 1/8" wide spring
steel.
• Tough, impact resistant reel.
• Comfortable slip resistant gripping surface.
Cat. No.
20206
50211
50221
Desc.
50' x 1/8" x .060"
100' x 1/8" x .060"
200' x 1/8" x .060"
Reel Dia. (in)
12"
12"
12"
– Fish Tapes Continue On Next Page –
WWW.HANESSUPPLY.COM
19 -77
Hand Tools
Cat.
No.
51216
51217
19
Albany/NE Division:
518.438.0139
Rochester Division:
585.235.0160
FAX:
FAX:
FAX:
716.826.4412
518.438.5343
585.235.0229
CCISCO: 843.238.1338
FAX:
843.238.8337
Hand Tools
Klein Tools
Fish Tapes (continued)
PowerLineTM Series
Klein-Flex® Fish Tape with Grip-ItTM Handle in Winder Reel
Combo Sets, Tool and Utility Pouches, Belts,
Tool Holders and Accessories
• Super-flexible 3/16" round spiral-wound steel tape.
• Enlarged eye-loop accomodates up to five
unstripped No. 12 AWG wires.
• Rated to 500 lbs. maximum pulling force.
• In 50' length with reel. (Note: 25' length
comes with easy-grip handle.)
Cat. No.
50151
50125
Constructed of double layered 1000 denier Dupont’s Cordura® Plus nylon
Exceptional resistance to abrasion, punctures and tearing
Double nylon-stitched and rivet reinforced
Oversized pockets and reinforced bottom for extra carrying capacity
Heavy-duty, nylon webbing
Lightweight and comfortable in warm climates, soft and pliable in cold
climates
• Great-looking, washable and made in the USA
•
•
•
•
•
•
Desc.
Reel Dia. (in)
50' in Reel, grip-It handle
12"
25' in Reel, easy-grip handel
8-1/2
PowerLineTM Combo Sets:
Klein-Lite® Non-Metallic, Fish Tape with
Grip-ItTM Handle in Winder Reel
4-Piece Electrician’s Combo Set
• High pulling strength.
• Enlarged contoured eye-loop accommodates up to five unstripped
No. 12 AWG wires.
• Smooth action, reduces tape jamming
• Rated to 500 lbs. maximum pulling force.
• UV resistant.
• Leaders on applicable fish-tape models are 7" long.
Cat. No.
Desc. (ft)
Reel Dia. (in)
Klein-Lite Fish Tape with reel, and 7" leader
50156
25'
12"
50161
50'
12"
50166
100'
12"
Klein-Lite Fish Tape with reel, without leader
50176
25'
12"
50181
50'
12"
50186
100'
12"
Same as tape in reel with eye-loops on both
ends. Three standard lengths: other lengths
available on special order.
Cat. No. 5709 (M, L, XL or XXL)
• 8-Pocket Tool Pouch
• 3-Pocket Utility Pouch
• Hammer holder
• Padded tool belt (includes nylon web belt)
Cat. No.
50025
50050
50100
Desc. (ft)
25*
50*
100
*Only 25' and 50' lengths can be used as replacements in wider reels.
Replacement Flat-Steel Fish Tapes
(without reel)
Cat. No.
50305
50301
50320
This fish-tape ball provides a handy swivel hook for attachment of wires to
all Klein flat-steel fish tapes. Helps prevent kinks in tape and allows
smoother, easier fishing through tight runs. Simple installation requires
unscrewing head from base of fish-tape ball, sliding base onto
tape, heating and bending of fish-tape end, and reattachment of head to base. Detailed directions are furnished. Fish-tape ball is precision made from
black-oxide finished, high-strength steel.
Hand Tools
19
Description
Fish-Tape Ball
Fish-Tape Leader
Flexible 13-1/2" leader makes pushing and pulling flat-steel tapes easier.
Heavy-duty 3/16" diameter wound-steel spring with rustproof inner steel
cable will lead flat tapes through 90-degree bends and can withstand
500-lb. pull. Eye-loop accepts up to five unstripped No. 12 wires.
• Attaches to 1/8" or 1/4" (if ground to 1/8") flat-steel tapes. Makes fishing
through tight bends
easier, faster.
• New enlarged eye-loop
accommodates up to five
unstripped No. 12 wires.
50350
Leader for 1/8" or 1/4"* flat steel fish tapes.
Cat. No.
5709M
5709L
5709XL
5709XXL
5710M
5710L
5710XL
5710XXL
Desc.
4-Piece Combo Set
4-Piece Combo Set
4-Piece Combo Set
4-Piece Combo Set
4-Piece Electrician's combo Set
PowerLineTM Tool and Utility Pouches:
Cat No. 5718
• Squared pouch bottom for plenty of room
• Large utility pocket with divider
• 2 inside pockets for pliers
• 2 medium outside pockets for connectors or tools
• 2 small outside pockets for tools
19-Pocket Electrician’s Tool Pouch
Cat. No. 5719
• Squared pouch bottom for plenty of room
• Large utility pocket with divider
• 4 outside screw river cops
• 3 outside pliers pockets
• 2 inside pliers pockets
• 2 inside stripper pockets
• 2 inside accessory pockets
• 4 inside screwdriver loops
• Chain tape thong
9-Pocket Tool Pouch
Cat. No. 5700
• Large utility pocket with divider keeps tools upright
for easy access
• Medium pocket for connectors or tools
• Small pocket for tape measure
• 4 accessory pockets
– Continues On Next Page –
*1/4" tape ends must be ground to 1/8" width.
19 -78
Nominal Size (in)
28" - 38" waist
36" - 44" waist
40" - 48" waist
46" - 54" waist
28" - 38" waist
36" - 44" waist
40" - 48" waist
46" - 54" waist
8-Pocket Electrician’s Tool Pouch
Desc. (ft)
50
100
200
Fish-Tape Ball
Cat. No.
50351
Tools not included
4-Piece Combo Set (not shown)
WARNING: Although composite fish tape itself is non-magnetic, its metallic tip and
leader are conductive and could be grounded against conduit. DO NOT use on live
electrical circuits.
Klein-Flex Fish Tape Uncased Coils,
including replacement tape for
winder reel.
• 8-Pocket
Electrician’s Tool
Pouch
• 19-Pocket
Electrician’s Tool Pouch
• Hammer holder
• Padded tool belt
(includes nylon web belt)
WWW.HANESSUPPLY.COM
Albany/NE Division:
518.438.0139
Rochester Division:
585.235.0160
FAX:
FAX:
FAX:
716.826.4412
518.438.5343
585.235.0229
CCISCO: 843.238.1338
FAX:
843.238.8337
Hand Tools
Klein Tools
PowerLine Tool and Utility Pouches (continued):
TM
Closeable Pouch
8-Pocket Tool Pouch
Cat No. 5714
• Closeable pouch helps protect supplies and tools
• Tunnel loop fits nylon web and leather belts up to
2-114" wide
Cat. No. 5701
• Large utility pocket with divider keeps tools
upright for easy access
• Medium pocket for connectors or tools
• 4 accessory pockets
Hammer Holder
Cat. No. 5706
• Heavy-metal hammer loop riveted for strength
2-1/4" wide
3-Pocket Utility Pouch
Cat No. 5703
• Large, medium and small main pockets for
supplies and tools
Tape Measure Holder
Cat No. 5707
• Holds most tape measures with belt clips
• Rust-resistant metal clip riveted for strength
2-1/4" wide
Cat No. 5702
• Large and medium main pockets for supplies
and tools
Cat. No.
5700
5701
5702
5703
5718
5719
Desc.
9-Pocket Tool Pouch
8-Pocket Tool Pouch
8-Pocket Electrician's Tool Pouch
19-Pocket Electrician's Tool Pouch
Cellular Phone Holder
Cat. No. 5715
• Fits most cellular phones
• Metal belt clip for simple mount removal from belts
up to 2" wide
• Closeable Velcro flap and closed for convenient
storage
Nominal Size (in)
11" x 13"
11" x 13"
11" x 13"
11" x 13"
11" x 13"
11" x 13"
Utility Knife Holder
PowerLineTM Belts, Tool Holders
and Accessories:
Cat No. 5716
• Holds standard utility knife or other small tools
• Constructed of puncture-resistant Cordura Plus
2-1/4" wide
Padded Tool Belt
Padded Suspenders
Cat No. 5717
• Fully adjustable length – front & back
• Heavy-duty, 1-1/2" wide nylon web strength and
long wear
• Convenient Velcro fastening system
• Heavy-duty padding for user comfort
• 5" cushioned pad for stability and comfort
• Tapered front for comfort while bending
• Heavy duty 2" wide nylon web belt with
rugged polyvinyl buckle
Web Work Belt
Cat. No. 5705
• Adjustable belt-fits waist sizes up to 54"
• Heavy-duty, 2" wide nylon webbing for extra
strength
• Accommodates tunnel loop and slotted tool
pouches and holders
• Rugged polyvinyl buckle for quick release and adjustment
Multi-Purpose Holder
Cat. No. 5708
• Holds a flashlight, cellular phone or electrical
tester
• Tunnel loop fits nylon web or leather belts up
to 2-1/4" wide
Flashlight Holder
Cat No. 5713
• Accommodates most "D" cell size battery
flashlights up to 1-7/8" in diameter
• Heavy-duty, 1-1/2" wide nylon webbing for extra strength
• Tunnel loop fits nylon web and leather belts up to 2-1/4"
wide
Cat. No.
5704M
5704L
5704XL
5704XXL
5705
5706
5707
5708
5713
5714
5715
5716
5717
Desc.
Padded Tool Belt
Padded Tool Belt
Padded Tool Belt
Padded Tool Belt
Web Work Belt
Hammer Holder
Tape Measure Holder
Multi-Purpose Holder
Flashlight Holder
Closeable Pouch
Cellular Phone Holder
Utility Knife Holder
Padded Suspenders
Nominal Size (in)
28" x 38" waist
36" x 44" waist
40" x 48" waist
46" x 54" waist
Adjusts to 54" waist, 2" width
4-1/8" x 5"
3-1/2" x 4"
3-1/2" x 9"
4-1/4" x 2-3/8"
7-1/4" x 6-3/4"
7" x 3-3/8"
7-3/4" x 2-1/2"
One Size Fits Most
19
Hand Tools
WWW.HANESSUPPLY.COM
19 -79
Albany/NE Division:
518.438.0139
Rochester Division:
585.235.0160
FAX:
FAX:
FAX:
716.826.4412
518.438.5343
585.235.0229
CCISCO: 843.238.1338
FAX:
843.238.8337
Hand Tools
Klein Tools
8-Pocket Tool Pouch
Klein Tool Pouches
All Klein tool pouches are made of the finest materials available and those
most suitable for the product. Many pouches are specially designed to suit
specific needs of electricians, telephone installers, CATV installers, industrial maintenance engineers and other professionals. A wide variety of
designs insures that there is a pouch to suit virtually every individual preference and need.
Pouches with slots fit on belts up to 1-3/4” wide, except as otherwise
noted. Pouches with tunnel loops fit on belts up to 2” wide except as otherwise noted.
7-Pocket Multi-Purpose Tool Pouch
A multi-purpose pouch, soft and pliable. Moisture
resistant to retain flexibility even after being wet
and dried. Has two large, gusseted utility pockets,
two screwdriver pockets, hammer loop, three
pliers pockets and one chain tape thong. MADE
OF CHROME-TANNED LEATHER.
Cat. No.
5166
Tool Pouch
Pouch with center pocket for 6-foot wood rule, front loop
for No. D201-7CST and other pliers, two side loops for
keel holders. Knife snap on front. Slotted to fit belts up to
2" wide. MADE OF LEATHER.
Nominal Overall
Size (in)
5119
6-1/2 x 8-1/2
Cat. No. Nominal Overall Size
5164
Slotted pouch, fits belts up to 2" wide. Overall
Size: 6-3/4" x 9-3/4"
5164T Same as above but with tunnel loop to fit belts
up to 2-1/2" wide.
5164
8-Pocket Extra-Capacity Tool Pouch
An extra-capacity multi-purpose stitched and riveted
pouch with two pliers pockets, five screwdriver pockets,
large utility compartments, hammer loop, knife snap
and leather tape thong. Tunnel loop fits belt up to 3"
wide. MADE OF LEATHER.
Cat.
No.
5162T
Description
Leather pouch 7" x 10". Tunnel loop
fits belts up to 2-1/4" wide.
Cat.
No.
This multi-purpose pouch provides space for an
extraordinary number of tools. Four large, gusseted
utility pockets. Two pliers pockets. Two pockets for
screwdrivers. Knife snap. Choice of slotted or tunnel
loop style. MADE OF LEATHER.
Nominal Overall
Size (in)
8-1/2 x 10-3/4
6-Pocket Tool Pouch
Compact, multi-pocketed, stitched and riveted pouch
with compartments for a variety of tools. Also has an
extra-large utility pocket, tape thong and knife snap.
Tunnel loop fits belts up to 2" wide. MADE OF
LEATHER.
Cat.
No.
5160T
Nominal Overall
Size (in)
7 x 8-3/4
8-Pocket Tool Pouch
A roomy pouch for electricians, service men and
maintenance workers. Five large utility pockets for
a wide variety of tools such as pliers, wrenches,
wire cutters. Smaller pockets for screwdrivers,
scratch awls. Knife snap, chain tape thong and
tape rule holder are conveniently located on the
front. MADE OF CHROME-TANNED LEATHER.
5178
Leather pouch with tunnel loop to fit belts up
to 2-1/2" wide. Overall size: 12" x 10"
A high-quality pouch with extra-large, gusseted utility
pocket, two pliers pockets, two screwdriver pockets,
and knife snap. Slotted pouch. Fits belts up to 1-3/4"
Cat. No. Nominal Overall
No.
Size (in)
5126
6 x 8-3/4
6-Pocket Tool Pouch
Similar to pouch 5126 but has three pliers pockets
rather than two. Available with slots to fit belts up
to 2" wide or with a tunnel loop (5127T) to fit belts
up to 2-1/2" wide. Both feature all leather-stitched
construction. No. SL5127 is similar except with
stitched and riveted all leather construction.
ALL MADE OF LEATHER.
Hand Tools
Cat.
Nominal Overall
No.
Size (in)
5127
7 x 10
5127T
7 x 10
SL5127
7 x 10
Here is a versatile pouch favored by many telephone
installers. This pouch is riveted throughout to assure
long life. Ten separate compartments provide places
for a wide variety of pliers, screwdrivers and other
tools. Has ring and tape thong. Slotted pouch fits
belts up to 1-3/4" wide. MADE OF LEATHER.
Cat.
No.
5190
5-Pocket Tool Pouch
19
10-Pocket Tool Pouch
5127
Nominal Overall
Size (in)
6 x 8-3/4
11-Pocket Tool Pouch
A multi-pocketed, all-leather pouch made for electricians and other professionals. Soft, pliable and moisture-resistant to retain flexibility even after
being wet and dried. This redesigned pouch has a slotted-leather tape
thong that allows easy removal of 1" I.D. tape rolls and the stainless steel,
power-return tape holder clip accommodates
from 8' to 30' tapes. Has two closed-end pockets
for long screwdrivers; two small pockets for stubby screwdrivers; big double pocket for pliers,
special partitioned pocket for 9" torpedo level;
special pockets for wire stripper, awl and steel
tape; and two more pockets for additional tools.
Knife snap. Slotted pouch fits belts up to 2-3/4"
wide. Riveted and stitched. MADE OF LEATHER.
Cat.
No.
5167
Nominal Overall
Size (in)
10 x 10-1/2
10-Pocket Big-Capacity Tool Pouch
Rugged, big-capacity pouch with 10 separate
pockets. Four large, gusseted utility pockets.
Two pliers pockets. Four pockets for screwdrivers.
Knife snap. Slotted pouch fits belts up to 2" wide.
Riveted and stitched. MADE OF LEATHER.
Cat. Nominal Overall
No.
Size (in)
5165
10 x 10
19 -80
WWW.HANESSUPPLY.COM
Albany/NE Division:
518.438.0139
Rochester Division:
585.235.0160
FAX:
FAX:
FAX:
716.826.4412
518.438.5343
585.235.0229
CCISCO: 843.238.1338
FAX:
843.238.8337
Hand Tools
Klein Tools
6-Pocket Tool Pouch
Combination Aprons
This extra-spacious tool carrier is contoured to fit the
hip for added comfort. Large utility pocket provides
ample room for assorted tools. A smaller utility pocket,
two pliers pockets, two screwdriver pockets, a chain
tape thong and knife snap are provided. Available in
slotted or tunnel loop style. MADE OF LEATHER.
Nail/Screw and Tool-Pouch Combination
5168
Slotted pouch. Fits belts up to 2"
wide. Overall size: 9" x 11"
5168T
Same as above but with tunnel loop
to fit belts up to 2-1/2" wide.
5168
5168T
5-Pocket Tool Pouch
This high-quality pouch is curved to fit the hip for added
comfort. Has large utility pocket, two pliers pockets, two
screwdriver pockets and a knife snap. Slotted pouch fits
belts up to 1-1/2" wide. Made of Ultra-HydeTM.
Cat.
No.
5150
42244
Complete combination: belt (No. 5225), left-hand (No. 42246) and righthand (No. 42245) nail-and-tool pouches, and tape-rule holder (No. 5195.)
42245
Right-hand nail-and-tool pouch only. 10" x 11-1/2"
42246
Left-hand nail-and-tool pouch only. 10" x 11-1/2"
5225
Poly-web belt only. Adjustable from 32" to 48"
5195
Tape-rule holder only for 20' and 25' tapes.
Nominal Overall
Size (in)
8-3/4 x 9-1/4
7-Pocket Tool Pouch
A versatile pouch with seven individual compartments for
pliers, screwdrivers and other tools. Tunnel loop fits belts
up to 2" wide. Made of Ultra-HydeTM.
One-Piece Nail/Screw and Tool-Pouch Apron
Cat.
Nominal Overall
No.
Size (in)
5148T
8x9
5-Pocket Tool Pouch
These general-purpose pouches have an
extra-large utility pocket for assorted tools
and other items, a smaller utility pocket,
three small pockets and a tape thong.
Loops fit belts up to 2-1/4" wide. No. 5125 is
made of heavy canvas with heavy UltraHydeTM back for user comfort and stability
No. 5125L is made of leather and Ultra-HydeTM.
Cat.
Cat.
5125
5125L
Description
Canvas pouch with Ultra-Hyde back
Leather and Ultra-Hyde pouch
5125
Cat.
No.
42242
Nominal Overall
Size (in)
7-1/2 x 8-1/2
7-1/2 x 8-1/2
Size Adj.
(in)
32 - 48
Tool Holders
Hammer Holders
No. 5457 is slotted for attaching to 2" wide belt.
No. 5457T has tunnel loop to fit belts up to 3-1/2"
wide or to slide over D-rings, buckles and other
accessories. MADE OF LEATHER.
Has heavy hammer-loops on both sides, allowing for
convenient use by right-or left-handed workers. Large
flared inside pocket for nails; small pocket in front,
plus four small-tool side pockets. Has tunnel loop for
attaching to belts up to 3" wide. MADE OF LEATHER.
Cat.
No.
5457
5457T
Cat.
Nominal Overall
No.
Size (in)
42241
11 x 11-3/4
Nominal
Size (in)
4-1/4 x 10-1/2
4-1/4 x 12
5457
5457T
Hammer Holders
Small-Tool Pouch
Here is a pouch that can be hooked on belt or slipped in
almost any pocket. A convenient means of keeping track
of small, easily lost tools. Flap snaps back to form loop to
fit belts up to 3" wide. Made of Ultra-HydeTM.
Two hammer holders with heavy-metal hammer
loop riveted to panel. No. 5456 is slotted to fit belts
up to 2-1/2" wide. No. 5456T has tunnel loop to fit
belts up to 4" wide. MADE OF LEATHER.
Cat.
No.
5456
5456T
Nominal
Size (in)
4-1/2 x 8
4-1/4 x 9-1/2
19
5456
5456T
Hammer Holder
Utility Pouch
Utility pouch with 1" reinforced gusset. Has 2"
outside pockets. Tunnel loop fits belts up to 1"
Cat. Nominal Overall
No
Size (in)
5145
5-1/4 x 7
Heavy-metal hammer loop is riveted to panel. Hold-down
strap riveted to hammer loop, unsnaps with downward
pressure only, to resist upward pressure of hammer. Two
snap-on positions to hold large and small hammers. Tunnel
loop to fit belts up to 4" wide. MADE OF LEATHER.
Cat.
No.
5456TS
Nominal
Size (in)
4-1/4 x 9-1/2
WWW.HANESSUPPLY.COM
19 -81
Hand Tools
Nominal Overall
Size (in)
4-1/2 x 7
An amazingly versatile and roomy double-pouch apron for use by construction workers, carpenters and other professionals. Double-pouch
design allows unrestricted leg movement. Two large pockets plus two
smaller pockets for holding nails or bolts. All four pockets have rolled-over,
doubled edges for long wear. Two other pockets for holding pliers or other
small tools; reinforced throughout with rustproof rivets. Heavy-duty 2-1/4"
wide web belt has army style buckle, snap and slides. POUCHES ARE
MADE OF LEATHER.
5125L
Nail/Screw and Tool Pouch
Cat.
No.
5175
Exceptional utility and convenience in a durable belt with double pouch
and tape-rule holder combination. Consists of leather left- and right-hand
nail-and tool pouches, a fully adjustable polyweb belt and tape-rule holder
for 20' and 25' tapes. The
nail-and-tool pouches feature leather construction,
each with a heavy hammer
loop; large, flared inside
pocket for nails; a smaller
42244
pocket in front; three smalltool pockets; and tunnel loop
to fit any belt up to 3" width.
42245
Large pockets have rolled42246
over doubled edges for
extra-long life. All pouches
slide along belt for most
convenient working position.
Components are also available separately. POUCHES
ARE MADE OF LEATHER.
Albany/NE Division:
518.438.0139
Rochester Division:
585.235.0160
FAX:
FAX:
FAX:
716.826.4412
518.438.5343
585.235.0229
CCISCO: 843.238.1338
FAX:
843.238.8337
Hand Tools
Klein Tools
Pocket-Knife Holder
Scissors Holder
Leather case with snap closure for sportsman knives.
Loop on back fits belts up to 2-1/2" wide. Designed for
Klein Cat. No. 44137 and other similar sized sportsman
knives. MADE OF LEATHER.
A high-quality holder designed for Klein electrician’s
scissors, Nos. 2100-5 and 2100-7. Tunnel loop to fit
belts up to 1-3/4" wide. MADE OF LEATHER.
Cat.
No.
5100
5186
Leather knife case with belt loop
Nominal
Size (in)
2-1/4 x 8
Knife Holder
Holder designed to hold Klein utility knives, Cat. No. 44100
and 44105. Slotted to fit belts up to 2-1/2" wide. MADE OF
LEATHER.
Cat.
No.
5185
Scissors Holder
Economical scissors holder made of strap leather, riveted with a
clip on back for attaching to belt. Slotted to fit belts up to 1-1/2"
wide. Designed to hold Klein scissors, Nos. 2100-5 and 2100-7.
MADE OF LEATHER.
Nominal
Size (in)
2-1/4 x 8
Cat.
No.
5101
Tape-Rule Holders
Flashlight Holder
Cut-out sides for easy access to tape. Slotted for attaching
to belts up to 2-1/2" wide. MADE OF LEATHER.
A high-quality holder designed for a standard two-cell flashlight.
Slotted to fit belts up to 1-3/4" wide. Made of Ultra-HydeTM.
5193
Holds 10' and 12' tape sizes (3/4" wide only) Nominal
overall size: 3-1/2" x 6"
5194
Holds 16' tapes: also No. 926-5ME tape. Nominal
overall size: 4" x 6"
5195
Holds 20', 25', 30' tapes; also Nos. 926-6ME and
926-7.5ME tapes. Nominal overall size: 4-1/2" x 7"
Cat.
No.
5129
Pliers Holder
Holds Klein No. 69115 Voltage Tester and most standard
voltage testers. Full top flap with twist-closure keeps tester
in holder and keeps out weather and dirt. Slotted to fit belts
up to 2" wide. MADE OF LEATHER.
Cat.
Nominal
No.
Size (in)
5112 3-1/2 x 9
Cat.
No.
5137
Nominal
Size (in)
3-1/2 x 9-1/2
Pliers Holders
Voltage-Tester Holder
Has slots for attaching to belts up to 2". Nose of pliers protrudes through opening at bottom. Two sizes available; 5107-6
holds No. 201-7CST or any 6" or 7" pliers; 5107-9 holds No.
213-9ST or any 8" or 9" pliers. MADE OF LEATHER.
Designed to hold most standard voltage testers. Equipped with
a snap to prevent the instrument from falling out of holder.
Slotted to fit belts up to 1-3/4" wide. Made of Ultra-HydeTM.
Cat.
No.
5107-6
5107-9
Cat.
No.
5138
Nominal
Size (in)
3-1/2 x 8-1/2
3-3/4 x 11
Scissors and Cable Splicer’s Knife Holders
Cat. No.
5187
5187T
Nominal Size (in)
2-1/8 x 7-1/2
2-1/8 x 7-1/2
Slotted to fit belts up to 2" wide. MADE OF LEATHER.
Cat. No.
5118PRS
Description
3 pockets for pliers, folding rule
and screwdriver.
S5118PRS Same as above but has a two-way
knife snap.
5187
5187T
Cable Splicer’s Knife Holders
6-3/4 x 9-1/2
Lineman’s Knife Holder
Cat.
No.
5163
Nominal
Size (in)
2-1/8 x 7-3/4
2-1/8 x 7-1/2
5188
19 -82
Nominal Size (in)
6-3/4 x 9-1/2
This lineman’s knife holder is designed for Klein skinning knives
Nos. 1570-3 and 1570-3LR. Slotted to fit belts up to 2" wide.
MADE OF LEATHER.
Designed to hold Klein No. 44200 cable splicer’s
knife. No. 5188 pouch is slotted. No. 5188T pouch
has a tunnel loop. Both fit belts up to 2-1/4" wide.
MADE OF LEATHER.
Cat.
No.
5188
5188T
Nominal
Size (in)
3x8
Pliers, Rule and Screwdriver Holders
Specially designed to hold one pair of electrician’s
scissors (Klein No. 2100-5 or 2100-7) and the Klein
No. 44200 cable splicer’s knife. Knife fits in separate
sheath behind scissors pocket. 5187T has tunnel
loop. 5187 is slotted. Both fit belts up to 2-1/4" wide.
MADE OF LEATHER.
Hand Tools
Nominal
Size (in)
3x8
Leather Voltage-Tester Holder
Nose of pliers does not protrude from this high-quality holder.
Bottom is vented to prevent collection of dirt or water. Slotted
to fit belts up to 2" wide or may be riveted to belt. MADE OF
LEATHER.
19
Nominal
Size (in)
1-1/2 x 6-1/2
Nominal
Size (in)
3x9
5188T
WWW.HANESSUPPLY.COM
Albany/NE Division:
518.438.0139
Rochester Division:
585.235.0160
FAX:
FAX:
FAX:
716.826.4412
518.438.5343
585.235.0229
CCISCO: 843.238.1338
FAX:
843.238.8337
Hand Tools
Klein Tools
Pliers and Screwdriver Holder
General-Purpose Belt
This is NOT an occupational protective belt. Strong, 1-1/2" wide belt
of heavy strap leather. Removable single-tongue buckle held by two
heavy-duty snaps. MADE OF LEATHER.
Nom. Size (in)
5118S One pocket for side cutting
4x8
pliers and one for screwdriver.
Cat
No.
5202M
5202L
5202XL
Pliers, Rule, Screwdriver and Wrench Holder
Sizes
(in)
32 - 40
38 - 46
46 - 54
Belt Width
(in)
1-1/2
1-1/2
1-1/2
Lightweight Tool Belt
Nominal Size (in)
5118C Four pockets to hold pliers, rule,
7 x 10-1/2
screwdriver and adjustable wrench;
plus a two-way knife snap.
No exposed rivets in back.
This is NOT an occupational protective belt. The durability of strap leather
in a low cost tool belt. Designed to carry lightweight tool pouches. MADE
OF LEATHER.
Cat.
No.
5201
Pliers and Rule Holders
5118R Has pockets for side-cutting
pliers & 6'. folding rule.
Fits belts up to 2".
5118T
Same, but has tunnel loop to
fit belts up to 3-3/4".
Nominal Size
4-3/4 x 8
5118T
This is NOT an occupational protective belt. This rugged 2" wide belt is
made of heavy strap leather and equipped with a double-tongue buckle
to stand up to years of service. MADE OF LEATHER.
4-1/2 x 12-1/2
Wrench holders have tool-slots for two erection wrenches. No. 5460 is
slotted to fit on 2" wide belt; No. 5459-T has tunnel loop to fit belts up to
3-1/2" wide or to slide over D-rings, buckles and
other accessories. MADE OF LEATHER.
5460
Nominal
Size (in)
6x8
6 x 9-1/2
5459T
Leather wrench holder with cotton web tunnel loop. Has slots
for two erection wrenches. Tunnel loop allows use on wider
belts or to slide over D-rings, buckles and other accessories
up to 2". MADE OF LEATHER.
5417T
Holders for Klein bull pins. Attach to belt for on-thejob convenience. No. 5417 is slotted for attaching
to 2" wide belts. No. 5417T has tunnel loop to
permit use on wider belts or to slide over D-rings,
buckles, and other accessories up to 3-1/2".
MADE OF LEATHER.
Nominal
Size (in)
1-1/4 x 9
Size
(in)
32 - 40
38 - 46
46 - 54
Belt Width
(in)
1-1/2
1-1/2
1-1/2
Cat.
No.
5227M
5227L
5227XL
Size
(in)
32 - 40
40 - 48
48 - 56
Belt Width
(in)
1-1/2
1-1/2
1-1/2
Lightweight Utility Belt
This is NOT an occupational protective belt. This strong, lightweight
synthetic-web belt quickly adjusts for waist sizes through 52". The 2" wide
belt will accept tunnel-loop and slotted pouches and holders. The tough,
molded, non-metallic, slide-action buckle provides single-handed, quick
release and adjustment.
This is NOT an occupational protective belt. This rugged 2" wide belt has
separate reel-strap with its own buckle that lets you quickly and conveniently put on or take off a Klein tie-wire
reel and optional pad without removing
the belt or your tool pouch. The belt and
reel-strap are made of extra-heavy rigging leather. The belt has a strong double-tongue buckle with keeper, and is
5420
attractively embossed with a basketweave pattern. MADE OF LEATHER.
Cat.
Waist Size
No.
Size (in)
5420S
36
5420
40
5420L
44
5420XL
48
Belt Size Range
Range (in)
32 to 40
36 to 44
40 to 48
44 to 52
Side view of reel
belt showing reel &
pad on reel-strap
with tool pouch on
either side of belt
Belt Width
(in)
2
WWW.HANESSUPPLY.COM
19 -83
19
Hand Tools
Tool Belts
Size
(in)
Adjusts to 52"
This is NOT an occupational protective belt.
Made of leather with tool loops and chain-tape
thong. This belt may be used with all Klein
pouches and holders. MADE OF LEATHER.
Ironworker’s Heavy-Duty Tie-Wire Belt
Loop with snap hook for carrying an adjustable wrench, welder’s
igniter or other tool with hang hole. Slides on belts up to 4" wide.
MADE OF LEATHER.
Cat.
No.
5204
Electrician’s Leather Tool Belt
Ironworker’s Tie-Wire Belts, Reel, and Pad
5417
Snap Loop
Cat.
No.
5458
Belt Width
(in)
2
2
2
2
This is NOT an occupational protective belt.
This lightweight web belt comes with an
Ultra-Hyde™ tool loop and a chain tape
thong. Furnished with a friction buckle.
Bull-Pin Holders
Nominal Size (in)
3-1/4 x 11
3-1/4 x 12-1/4
Size
(in)
32 - 40
36 - 44
40 - 48
44 - 52
Electrician’s Web Tool Belt
Nominal
Size (in)
6 x 9-1/2
Cat. No.
5417
5417T
Cat.
No.
5415S
5415
5415L
5415XL
Cat.
No.
5207M
5207L
5207XL
Erection Wrench Holder
Cat.
No.
5461T
Belt Width
(in)
1
Heavy-Duty Embossed Tool Belt
5118R
Erection Wrench Holders
Cat.
No.
5460
5459T
Sizes
(in)
33 - 45
Albany/NE Division:
518.438.0139
Rochester Division:
585.235.0160
FAX:
FAX:
FAX:
716.826.4412
518.438.5343
585.235.0229
CCISCO: 843.238.1338
FAX:
843.238.8337
Hand Tools
Klein Tools
Tie-Wire Reel, Pad and Heavy-Duty Belt
Tool Bags
Tire-Wire Reel. Rugged, lightweight reel feeds pre-coiled wire smoothly,
easily, & quickly. Saves time and reduces wasted wire. Handles all types of
tie-wire and is designed for left- or right-hand use. 6-1/4" Dia. x 2-15/16" W.
Reel is smooth aluminum alloy with wear parts made of steel. Has
large, comfortable rewind knob, nylon bushing for smooth, trouble-free
operation & easily removed cover plate that permits quick, convenient
reloading. Optional accessory rigging-leather belt & hip pad available separately.
Canvas Tool Bags
27400
Cat. No. 27400
27450
Tie-wire reel pad. Worn on the belt under the Klein
tie-wire reel. Made of 3/16" thick rigging leather
with slots to accommodate belts up to 2" wide. Pad
size is 7" x 7" with rounded corners. Underside has
a sponge-rubber pad to minimize
hip fatigue. MADE OF LEATHER.
Cat. No. 27450
5415
Heavy-Duty, embossed tool belt. This is not
an occupational protective belt. Rugged 2"
wide belt of heavy strap leather for use with
the Klein tie-wire reel. Strong double-tongue
buckle. Size adjusts from 37" to 44". Other
sizes also available. MADE OF LEATHER.
Cat. Length
No.
(in)
5180
24
Leather Suspenders
This is NOT an occupational protective harness.
Do NOT use for safety support. Soft chrome-leather
work-belt suspenders have adjustable loops at the
end of all three straps to permit use on any width
Klein belt. Fully adjustable front and back to distribute the weight for added user comfort. MADE OF
LEATHER.
Suspenders
This is NOT an occupational protective harness. Do NOT use for safety
support. Suspenders help redistribute and relieve weight of heavy tool
pouches and aprons to reduce strain on back and hips. Suspenders
feature heavy-duty, 2" wide straps and easy-reach fully adjustable sliders
on front for comfort and convenience. Clips and slides are nickel-plated for
corrosion resistance. Extra-strong belt clips have alligator teeth for added
gripping power. One size fits all. Nylon Web
Suspenders have adjustable, leather strap spreader
at back. Elastic-Back suspenders have synthetic web
front straps and synthetic-web elastic rear straps.
Both front and rear straps are laminated between
a 2-piece, leather cross section at the back.
Elastic-Back (Rainbow)
Elastic-Back (Red)
Elastic-Back (Blue)
Width
(in)
10
Depth
(in)
18
Made of No. 6 canvas with extra-strong
double canvas bottom.
Cat. Length
No.
(in)
5156
19
60208RB
Depth
(in)
10
14
14
14
15
15
15
Canvas Tool Bag
Cat. No. 5413
60222RB
60224R
60223B
Length
(in)
12
14
16
18
20
22
24
Orange vinyl-coated nylon fabric bag. Extra large to hold more.
Naugahyde-reinforced bottom extends 3" up the sides. The bottom of
the bag is protected by metal studs.
Nylon-web handles extend around bag for
extra support. Wide opening steel frame is
securely riveted in top of bag. Extra flap
for storm protection.
Work-Belt Suspenders
Color
Nylon-Web (Rainbow)
Nylon-Web (Red)
Nylon-Web (Blue)
Cat.
No.
5102-12
5102-14
5102-16
5102-18
5102-20
5102-22
5102-24
Extra-Large Nylon Equipment Bag
Cat. No. 5415
Cat. No.
60208RB
60209R
60210B
Durable bags made of one-piece No. 8 white canvas. Bottom and 3" of lower
sides are covered with one-piece Naugahyde, cemented & lock-stitched.
Bottom is protected w/steel studs. Mouth has steel frame. Handles are
harness leather. All bags have two retaining
straps & buckles. Bags are 6" wide. For
shoulder strap kit see Cat. No. 5102S.
Width
(in)
9
Depth
(in)
15
Canvas Utility Bag
Made of heavy No. 8 brown canvas with 1/4" rope ring
sewn into top for extra rigidity. Snaps provided on loop for
easy attachment to belts up to 3" wide. Ventilating eyelet
in bottom.
Cat.
Overall
Top Opening
No.
Size (in)
Size (in)
5142
9 x10
8x3
5142P Same as above but with inside pocket.
Ten-Compartment Drawstring Bag
A 12 oz. olive-drab fabric bag with 10 divided
compartments to hold small parts.
Cat.
No
5151
Dia.
(in)
11
Depth
(in)
6
Bull-Pin and Bolt Bags
19
Hand Tools
Bolt bag with bull-pin loop on each side. Made of No. 4 canvas with double
bottom, 3" belt loops or tunnel loop. ALSO AVAILABLE IN LEATHER.
5416
Canvas, 5" x 9" x 10" deep. Loops fit
belts up to 3" wide.
5416T
Same, with tunnel loop.
5416L
Same as No. 5416T except made of
leather.
5416
19 -84
WWW.HANESSUPPLY.COM
5416T
Albany/NE Division:
518.438.0139
Rochester Division:
585.235.0160
FAX:
FAX:
FAX:
716.826.4412
518.438.5343
585.235.0229
CCISCO: 843.238.1338
FAX:
843.238.8337
Hand Tools
Klein Tools
Leather Bolt Bag
Leather-Bottom Bucket
A soft-leather bolt bag with rugged stitched
and riveted construction. Tunnel loop fits belts
up to 3". MADE OF LEATHER.
This Klein bucket is more widely used by public utilities
than any other. Made of No. 1 canvas with Cycolac top
ring. Bottom is covered with leather reinforcement extending 3" up the sides. Inside pocket measures 8" x 8".
Polypropylene rope handle is reinforced with leather
where it is spliced around top ring. Spec. GGG-B-50.
Cat. No.
42247
Size (in)
5 x 8-1/2 x 8-1/2 deep
Line-Hose Bag
This line-hose bag is large enough to accommodate several
pieces of hose and may also be used to raise protective rubber
blankets that are rolled. Made of No. 6 canvas with Cycolac top
ring and molded bottom. Leather cuff extends 3" up the side.
Handle of 1/2" polypropylene rope is reinforced with leather
where it is spliced around top ring. Standard height is 48".
Other lengths and larger diameters available on special order.
Call for further details.
Cat.
No
5110-48
Dia.
(in)
48
Depth
(in)
7
Cat.
No.
5104
5104S
Top
Bottom
Height
Dia. (in)
Dia. (in)
(in)
12
12
17
Same as above but equipped with
No. 2012 swivel snap.
5104
Heavy-Duty Bucket
Made of heavy No. 4 canvas with a Cycolac top ring and
molded bottom. Polypropylene-rope handle spliced around
top ring. Comes with No. 2012 swivel snap. Meets telephone
specification AT6673 or CAO 6673.
Cat.
No.
5103S
Top
Dia. (in)
12
Bottom Height
Dia. (in)
(in)
9
12
Canvas Electrode Bag
Bag is tough No. 4 canvas with heat-resistant hard-leather
bottom. Height in front is 12"; height in back is 15-1/2".
Web loop for sliding over belt.
Cat.
No
5471
Nominal
Dia. (in)
2-1/2
Heavy-Duty Buckets
with Pockets
Tapered-wall buckets, with inside or
outside pockets for extra utility and convenience. Made of heavy No. 4 canvas
with a Cycolac top ring and molded bottom. Each bucket has a polypropylenerope handle reinforced with leather where
it is spliced around the top ring. Handle
has a No. 2012 swivel snap.
Canvas Buckets
All of these durable straight-wall and tapered-wall buckets are made of
heavy-duty canvas. All have Cycolac top rings and molded bottoms.
Polypropylene rope handle reinforced with leather where it is spliced around
top ring. All Klein canvas buckets may also be made of orange vinyl-coated
nylon as a special order. Specify “VC” after the catalog number.
5171PS
5172PS
Cat.
Top
Bottom Height
No. of
No.
Dia. (in) Dia. (in)
(in)
Pockets
5171PS
12
9
12
4 Outside
5172PS
12
9
12
15 Inside
Top View
Straight-Wall Buckets
Made of No. 6 canvas.
Cat. No.
5106
5106P
5106S
Oval Bucket with 41 Pockets
Size and Description
9" Dia. x 14" H
Same as 5106 but with two 7" x 7" inside pockets.
Same as 5106 but with No. 2012 swivel snap.
5106
Cat.
No.
5152S
Wide-Opening
Straight-Wall Buckets
5109
Cat. No.
5109
5109P
5109S
5109PS
Has 26 pockets inside and 15 pockets outside for use
by cable splicers who use many color-coded ties. Made
of heavy No. 6 canvas. Bucket has Cycolac top ring and
molded bottom. Tripod suspension rope is reinforced
with leather where spliced around top ring. Equipped
with No. 2012 swivel snap hooks.
Size and Description
12" Dia. x 15" H
Same as 5109 but with two 8" x 8" inside pockets.
Same as 5109 but with No. 2012 swivel snap.
Same as 5109P but with No. 2012 swivel snap.
Length
(in)
14
Width
(in)
8
Height
(in)
10
Oval Bucket with 15 Pockets
Has 15 pockets inside. Made of No. 6
canvas. Tripod suspension equipped
with No. 2012 swivel snap hook.
Length
(in)
14
Width
(in)
8
5144
19
Height
(in)
10
Hand Tools
Cat.
No.
5144S
5144S
Tapered-Wall Buckets
Cat.
No.
5113
5113S
Top
Bottom
Height
Dia. (in)
Dia. (in)
(in)
12
9
13
Same as 5113 but with
No. 2012 swivel snap.
5113
WWW.HANESSUPPLY.COM
19 -85
Albany/NE Division:
518.438.0139
Rochester Division:
585.235.0160
FAX:
FAX:
FAX:
716.826.4412
518.438.5343
585.235.0229
CCISCO: 843.238.1338
FAX:
843.238.8337
Hand Tools
Klein Tools
Block & Tackle
Rebar Tools
These are NOT occupational protective devices. NOT for human support.
These light, galvanized-steel shell block are fitted with snubbing hooks to
hold the load in any position. Sheaves are strong yet lightweight aluminum
alloy with all-bronze bushings. Available with standard snap hooks or
guarded snap hooks (with snap hook nose lengthened to extend over the
latch or keeper.) Choice of drop-forged hook No. 258 or swivel hook No.
259. Hooks fit under insulator and engage pin on cross arm.
All Klein block and tackle use high quality, 3/8" diameter rope. Catalog
numbers followed by S/R have rope spliced to block.
Maximum safe load for all block and tackle is 750 lbs.
Grizzly® tools are produced by Klein especially for rebar work and concrete
construction. They are exceptionally rugged, proven tools with unique
design features that help save time and effort on construction job. All are
made to highest-quality standards for strength and durability. All are
designed to provide long life, trouble-free service and convenience in use.
1802-30 S/R
Cat. No.
Description
Blocks with standard snap hooks.
1802-30
Furnished with 25' of 3/8" rope. Has
No. 267 block with snap hook and a
detachable drop-forged anchor hook
on one end and block No. 268 with
eye and rope tie-off hook on other
end.
1802-30 S/R
Same as above but with rope spliced
to No. 268 block.
1802-30S
Same as 1802-30 except supplied
with a detachable swivel anchor hook
(No. 259) instead of hook No. 258.
1802-30S S/R Same as above but with rope spliced
to No. 268 block.
Blocks with guarded snap hooks.
H1802-30
Furnished with 25' of 3/8" rope. Has
No. H267 block with guarded snap
hook and a detachable drop-forged
anchor hook (No. 258) on one end
and block No. H268 (with guarded
snap hook, eye and rope tie-off hook)
on other end.
H1802-30 S/R Same as above but with rope spliced
to No. H268 block.
H1802-30S
Same as H1802-30 except supplied
with a detachable swivel anchor hook
(No. 259) instead of hook No. 258.
H1802-30S S/R Same as above but with rope spliced
to No. H268 block.
268
268
H267
H268
Description
Plain block of light-galvanized
steel and aluminum alloy.
Sheaves have bronze bushings.
Same as 267 but with eye to
splice line to block and rope
tie-off hook.
Same as 267 but nose extends
over keeper.
Same as 268 but nose extends
over keeper.
267
H267
267 block w/ 258 hook
H1802-30 S/R
Guarded
Snap Hook
H268
268
H267 block
w/ 258 hook
Hand Tools
Eye I.D.
Throat
(in)
Opening (in)
5/8
3-1/4
Swivel Anchor Hook
This is NOT an occupational protective hook. NOT for human support. The
swivel clevis on this drop-forged hook will engage with snap on Klein block
& tackle No. 1802-30 and H1802-30. Swivel prevents twisting and kinking
of rope. Maximum safe load 750 lbs.
Cat.
No.
259
Overall
Lgth (in)
6-1/2
19 -86
64302
Manual rebar shear complete with handle and wooden platform. Overall size:
6" H x 6" W x 13" L. Handle is 60" long.
64321
Replacement cutting blades.(Pair)
Lightweight rebar hickeys have exceptionally
durable steel-alloy heads and extra-strong
handles to withstand punishing service conditions. Five sizes bend rebar from No. 3
through No. 9. Heavy-duty tubular-steel handles range from 24" through 60" lengths.
This is NOT an occupational protective hook. NOT for human support.
Standard on Klein block & tackle No. 1802-30 and H1802-30, this dropforged hook is designed to slip under insulator and
engage pin of cross arm. Maximum safe load 750 lbs.
19
Top-loading 3/4" heavy-duty model cuts up to
and through No. 6 rebar. Has easily replaceable
tool-steel knives, and features extra-heavy steel
construction for long service life. Weighs only 49
lbs. Complete with wooden platform, mounting
bolts and removable steel handle that provides
excellent leverage.
Rebar Hickeys
Anchor Hook
Overall
Lgth (in)
5-1/2
64304 Rebar bender complete with handle.
Overall size: 7" H x 5" W x 6" L. Handle
is 40" long. Platform is NOT included.
H267 block w/ 258 hook
Hooks for Block & Tackle
Cat.
No.
258
An easy-to-use tool that bends up to No. 5
rebar. Features hardened pins and rollers
for heavy-duty service. Weighs 17 lbs.
Heavy-duty tubular-steel handle provides
excellent leverage.
Manual Rebar Shear
Blocks without Ropes and Hooks
Cat. No.
267
Manual Rebar Bender
64308
Cat.
Hickey Bends Rebar Head Type and
Handle
No.
Size
Size
Bending Angle Lgth. (in)
64308
1
Nos. 3,4
Single 65O
24
64309
1a
Nos. 3,4
Double 65O & 90O
24
O
64310
2
No. 5
Single 65
40
40
64311
3
No. 6
Single 65O
O
64312
4
Nos. 7 thru 9
Single 65
60
Grizzly® Bar
A heavy, strong, multi-purpose
tool that saves time and effort on the
job. Its 3" width forms. Its efficient
blade angle and 55" total length provides high leverage as a crow bar
and nail and spike puller. Blade is
hardened alloy with keyhole nailpulling slot in center and V-notch in
tapered edge. It is a very efficient
nail-pulling tool even in awkward
positions. Can also be used to help
align walls during tilt-up construction,
roll and align large pipe, remove shingles and flooring and for many other
stripping and prying tasks.
64306
Grizzly bar form-stripper/crow
bar/nail puller. Overall length
is 55-1/2".
Eye I.D.
Throat
(in)
Opening (in)
1
3-1/4
WWW.HANESSUPPLY.COM
Pulling
Spikes
Rolling
Pipes
Prying
Stripping
Forms
Albany/NE Division:
518.438.0139
Rochester Division:
585.235.0160
FAX:
FAX:
FAX:
716.826.4412
518.438.5343
585.235.0229
CCISCO: 843.238.1338
FAX:
843.238.8337
Hand Tools
Klein Tools
Bull Pins
“Chicago” Grips
Broad-Head Bull Pins
Grips for Large-Diameter Conductors
A drop-forged, heat-treated bull pin which increases efficiency by proceeding a larger striking surface. Design of the head also reduces chance of
pin slipping from the hand when aligning holes. Angled head and smooth
blending of radii increases strength and reduces the danger of chipping.
Below the head, squared-off shoulders have been forged to provide a surface for applying wrench to loosen wedged bull pins. Long, even taper
reduces binding and hang-up. Klein broad-head bull pins offer added
resistance to “mushrooming”, permitting much longer use than is possible
with conventional designs. Black finish. NOTE: OSHA specifically states
that, “impact tools such as drift pins, wedges and chisels, shall be kept
free of mushroomed heads.”
Klein custom finishes each to these grips to your cable specifications.
Designed for hollow conductors and other large-diameter cables, the
round jaws of these grips are shaped to provide maximum contact with the
circumference of the cable, virtually eliminating conductor damage.
Because we hold these grips in blank and finish each grip to your specs,
allow 60 to 90 days for delivery. Since these grips are made to special
order, they are not returnable.
Cat. No. 1628-50 is furnished with removable floating jaw which allows
maximum coverage of cables and minimize conductor damage, particularly under heavy load. The removable jaw
is held in place by a bolt swaged into the
lever arm of grip, secured by a nut and
cotter pin. Jaw must be removed to
insert cable.
Your order must specify exact outside
diameter of cables, circular mills with
Inside
strand combination or manufacturer’s
Jaw
code. Each grip for large diameter cable
Contour
is made for one-size cable only.
Cat.
No.
3255
3256
Top
Point
Length
Dia. (in) Dia. (in)
(in)
1-1/4
5/16
13
1-1/16
1/4
10
All diameters are nominal.
Standard Bull Pins
Machined from forge-quality alloy steel. Standard design offers greater initial
economy, but no added protection against mushrooming. Available in all of the
most popular sizes. Heat-treated. Black finish. NOTE: For safety’s sake, OSHA
requires that bull pins be replaced when the head begins to mushroom.
Cat.
No.
3251
3252
3257
3258
3265
3259
Top
Point
Length
Dia. (in) Dia. (in)
(in)
1-1/16
3/8
15
1-3/16
7/16
15
1-1/16
3/8
12
1-3/16
7/16
12
1-1/4
7/16
12
1-5/16
7/16
12
Machined from forge-quality alloy steel. Tapers are uniform and blend into
body diameter. Tough, drop-forged steel will probably end-pin in use.
Heat-treated. Black finish.
Ripping Bars
Carbon-Steel Ripping Bar
Strong, high-carbon steel construction; heat-treated claws. Efficient, double-claw design. Baked-on black finish. Heavy 90-degree claw gets into
Cat.
tight spaces, has one “V” nail puller.
No
Thinner straight claw for ripping has
66380
both “V” and keyhole nail pullers.
Forged spring steel 1/4" thick and 1-1/2" wide. Fully heat-treated w/sandblasted finish for better gripping. Both ends with pry edge and “V” nail puller;
one end curved, the other at 90-degree angle. Keyhole nail-puller in body.
Overall
Lgth. (in)
14
Connecting Bars
Cat.
Hex.
Length
No.
Dia. (in)
(in)
3242
3/4
30
3243
7/8
36
3244
3/4
24
Similar to hexagonal bar No. 3242
above but chisel-end is straight.
3240
3/4
30
.88
1.24
1.54
1.82
15,000
20,000
25,000
25,000
17
27
34
34
7-1/4
10-3/4
10-3/4
10-3/4
Grips for Bare A.C.S.R.,
Aluminum and
Stranded-Copper Cables
The round, smooth inside jaw contour
on this series of grips is ideal for bare
A.C.S.R., aluminum and stranded-copper
cables. The smooth jaws grip with maximum contact; are less likely to damage
conductors.
Cat.
No.
Minimum Cable*
(in)
Maximum* Cable
(in)
1656-20
1656-30
1656-40
1656-50
1656-60
6 A.C.S.R. .20
2 A.C.S.R. .31
.53
397,500 CM A.C.S.R. .74
477,000 CM A.C.S.R. .86
1/0 A.C.S.R. .40
.53
336,400 CM A.C.S.R. .74
477,000 CM A.C.S.R. .86
605,000 CM A.C.S.R. .96
Inside
Jaw
Contour
Max.
Approx.
Jaw
Safe
Wt. Each Length
Load (lbs) (lbs)
(in)
4500
4500
8000
8000
8000
3
3-3/4
7-1/2
7-1/2
7-1/2
4
4-3/4
5-1/2
5-1/2
5-1/2
Round Bars
Cat.
Dia.
Length
No.
(in)
(in)
3245
3/4
30
3246
7/8
36
3247
3/4
24
3248
7/8
30
Similar to round bar No. 3245
above but chisel-end is straight.
3241
3/4
30
Lightweight grips designed for use on
aluminum conductors in distribution work.
Round jaws shaped to provide maximum
contact with circumference of cable, less
likely to damage conductors. Supplied with
spring and locking loop handles, allowing
jaws to be held in an open position for
easier placement on cable.*
Cat.
Min.
No.
Size (in)
1678-20
.96
1678-30
1.02
1678-40
1.08
1678-50
1.14
Max. Cable
Size (in)
1.02
1.08
1.14
1.20
Max. Safe
Load (lbs)
8000
5500
5500
5500
Inside
Jaw
Contour
Approx.
Jaw
Wt. Ea. (lbs) Lgth. (in)
7-1/2
5-1/2
7-1/2
5-1/2
7-1/2
5-1/2
7-1/2
5-1/2
* Can be supplied with hotline latch on
special order call for details
19
Grip for Bare Wire
Hand Tools
Provide extra leverage when positioning steel members and aligning boltholes. These drop-forged fit-up bars are pointed on one end; the chisel-end
is available straight of at a 15-degree angle to give greater leverage.
Hexagonal or round.
Hexagonal Bars
.31 477,000 CM A.C.S.R.
.85 1,033,500 CM A.C.S.R.
1.24 1,590,000 CM A.C.S.R.
1.00
2,500,000 CM Alu.
Grips for Aluminum Conductors
Overall
Lgth. (in)
18
Spring-Steel Ripping Bar
Cat.
No
66384
Max.
Approx.
Jaw
Safe
Wt. Each Length
Load (lbs) (lbs)
(in)
Maximum* Cable
(in)
*Minimum-maximum sizes listed indicate the unfinished size-range capability for each
Cat. No. Each grip is finished to fit one specific cable size only within range shown.
† Maximum safe stringing tension 12,500 lbs. to minimize conductor damage.
Barrel-Type Drift Pins
Top
Point
Length
Dia. (in) Dia. (in)
(in)
11/16
5/16
7-1/2
13/16
7/16
8
15/16
1/2
8
1-1/16
9/16
8
Minimum Cable*
(in)
1628-16P
2 A.C.S.R.
1628-30 † 477,000 CM A.C.S.R.
1628-40 † 1,003,500 CM A.C.S.R.
1628-50 † 666,600 CM A.C.S.R.
Drift Pins
Cat.
No.
3260
3261
3262
3263
Cat.
No.
A lightweight especially economical grip for
working with solid and stranded bare wire
from .08" to .20". Single “V” groove jaw.
Inside
Jaw
Contour
Cat.
No.
Min.
Size (in)
1613-30 12 B&S Solid .08
WWW.HANESSUPPLY.COM
Max. Cable
Size (in)
4 B&S Solid .20
Max. Safe
Approx.
Jaw
Load (lbs) Wt. Ea. (lbs) Lgth. (in)
1500
1-1/2
3
19 -87
Albany/NE Division:
518.438.0139
Rochester Division:
585.235.0160
FAX:
FAX:
FAX:
716.826.4412
518.438.5343
585.235.0229
CCISCO: 843.238.1338
FAX:
843.238.8337
Hand Tools
Klein Tools
Grips for Weatherproof Wire
Hot-Line Grips for Bare Conductors
Round inside jaw contour for weatherproof coated wire. Notches in jaw provide
firm grip on insulation.
Klein provides hot-line grips for both bare and insulated conductors.
Grip may be placed on wire with hot-line stick.
When stick is removed, latch closes automatically to guard against grip accidentally disengaging from wire. Standard
hot-line grips are not supplied with
springs or lock-open features. When
†
these features are desired, add prefix
letter “S” before catalog number.
(example: S1684-5H).
Inside
NOTE: Due to various types of weatherproof
coatings available, selection of proper grips is
determined by outside diameter of cable.
Cat.
Min. Cable Max. Cable Max. Safe
Approx.
No.
Size (in)
Size (in)
Load (lbs) Wt. Ea. (lbs)
1611-20
.20
.40
4500
3
1611-30
.31
.53
4500
3-3/4
1611-40
.53
.74
8000
7-3/4
1611-50
.78
.88
8000
7-3/4
Jaw Lgth.
(in)
4
4-3/4
5-1/2
5-1/2
Inside
Jaw
Contour
Jaw
Contour
Cat.*
Minimum Conductor
Maximum Conductor
No.
(in)
(in)
1613-40H †
8 B&S Solid .12
1/0 B&S Strand .37
1684-5H †
.218
.55
1656-20H •
6 A.C.S.R. .20
1/0 A.C.S.R. .40
1656-30H •
2 A.C.S.R. .31
.53
1656-40H •
.53 336,400 CM A.C.S.R. .74
1656-50H •
.74
.86
1656-60H • 477,000 CM A.C.S.R. .86 605,000 CM A.C.S.R. .96
Grips for PVC-Covered Conductors
The serpentine jaws of this grips series are specially machined to
allow insertion of insulated conductor
through the jaws, which reduces danger
of slippage, which might result in insulation damage. Eliminates necessity of
stripping insulation from conductor.
Round inside-jaw contour.
Max. Safe Approx. Jaw
Load
Wt. Ea. Lgth.
(lbs)
(lbs)
(in)
4500
3-1/4
4
8000
6-1/4
5
4500
3-1/4
4
4500
4
4-3/4
8000
7-3/4 5-1/2
8000
7-3/4 5-1/2
8000
7-1/2 5-1/2
* To order springs and lock-open features, add prefix letter “S” before catalog number.
Cat.
Approx.
No.
Size (in)
Size (in)
1659-20
.20
.42
4500
3
1659-30
.31
.50
4500
3-3/4
1659-40
.49
.79
8000
7-3/4
1659-50
.79
1.01
8000
7-3/4
Jaw Lgth.
(in)
4
4-3/4
5-1/2
5-1/2
Inside
Jaw
Contour
Grips for Extra-High-Strength
Cables, Messenger, Guy Strand
and Conductors
A family of grips for cable sizes from .12"
to 1.0". Double “V” grooves give fourpoint contact, reducing chance of slipping and providing proper alignment. For
larger conductors, see our grips with round inside-jaw contour.
Cat.
Approx.
Jaw Lgth.
No.
Size (in)
Size (in)
(in)
1613-40
.12
.37
4500
3
4
1684-5
.218
.55
8000
6-1/4
5
1692-5
.218
.55
8000
6-3/8
5
1684-5F*
.16
.55
8000
6-1/4
5
1628-16
.31
.62
15,000
15-1/2
7-1/4
1628-17
.50
.75
15,000
17
7-1/4
1628-18
.75
1.00
15,000
17
7-1/4
These lightweight, compact grips pull an
exceptionally wide range of cable sizes
and types. Each grip is designed with
round inside-jaw contours. The lower jaw
is serrated to firmly grip insulated cables
and conductors. The design includes a
latch that prevents the grip from falling in
case of jaw disengagement from the
cable, plus a large-diameter eye that
accommodates large hooks on hoists,
winches and tackle blocks.
Hand Tools
19
Inside
Jaw
Contour
*Hot-line latch and spring.
Inside
Jaw
Contour
Bell-System Type Grips
1684-5AT is identical to Bell-System type
“L” strand puller, 1628-16AT is identical to
Bell-System type “H” strand puller. All are
equipped with chain, toggle and shackle.
For support wire .134 and larger, refer to 1659
series. Outside diameter of support wire includes
thickness of polyethylene coating.
Cat.
No.
1684-5AT
1628-16AT
1692-5AT
1685-20
Approx.
Jaw
Size (in)
Size (in) Load (lbs) Wt. Ea. (lbs) Lgth. (in)
.218
.55
8000
6-1/4
5
.31
.62
15,000
15-1/2
7-1/4
.218
.55
8000
6-3/8
5
“Type B” Strand Puller
1865-30
1865-31
Cat.
Approx.
Jaw Lgth.
No.
Size (in)
Size (in)
(in)
1685-20
.157
.886
4500
3
2.36
1865-30
.625
1.250
6600
5
4.5
1685-31
.625
1.250
7500
5
4.5
19 -88
When pulling EHS (extra-high-strength)
galvanized-steel cable, the galvanizing
has a tendency to coat the jaws of any
grip, causing the cable to slip. To reduce
the possibility of slippage and damage
to the cable, the jaws of this grip are
milled on a curve with a double “V”
contour. Available with hot-line latch
and spring, Cat. No. S1684-74H.
Cat.
Approx.
Jaw
No.
Size (in)
Size (in) Load (lbs) Wt. Ea. (lbs) Lgth. (in)
1684-74
.218
.55
8000
6-1/4
5
S1684-74H*
.218
.55
8000
6-1/4
5
*Similar to No.1684-5 above except with a file inserted in jaw for extra gripping power.
Replacement file No. 578 and screws No. 573 are also available.
Parallel-Jaw Grips
Curved-Jaw Grips for EHS Cable
Inside
Jaw
Contour
This grip is similar to Bell-System
Type B strand puller. Designed to
pull 1/4" figure-8 telephone cable.
Serpentine grooves grip insulation
on strand, preventing slippage.
Equipped with chain, toggle and
shackle.
Cat.
Min. Cable
No.
Size (in)
1659-5AT
.20
WWW.HANESSUPPLY.COM
Max. Cable
Size (in)
.37
Inside
Jaw
Contour
Max. Safe
Approx.
Jaw
5000
6
5
Inside
Jaw
Contour
Albany/NE Division:
518.438.0139
Rochester Division:
585.235.0160
FAX:
FAX:
FAX:
716.826.4412
518.438.5343
585.235.0229
CCISCO: 843.238.1338
FAX:
843.238.8337
Hand Tools
Klein Tools/Lewis
®
Parallel-Jaw Grips
Cat.
Min. Cable Max. Cable
No.
Size (in)
Size (in)
1686-10
.20
.40
1671-10
.37
.75
1686-20 *
.20
.40
1672-10 *
.37
.75
Lewis®
Lewis Sealed Ball Bearing Directional
Boring Swivel
1671-10
Longer jaws achieve a firm hold,
reducing possibility of slippage and
damage to cable. The design includes
a latch, plus a large-diameter eye that
accommodates large hooks on hoists,
winches and tackle blocks. When latch
is closed, it helps maintain cable position in grip jaws.
1672-10
Max. Safe
Approx.
Jaw
10,000
5
4-3/8
10,000
5
4-3/8
10,000
5
4-3/8
10,000
5
4-3/8
Inside
Jaw
Contour
*1672-10 is same as 1671-10 but with knurled jaws.
1686-20 is the same as 1686-10 but with knurled jaws.
Klein “Haven” Grips
Designed for use when light, compact grip is desired and where conductor
damage is not a factor. Gripping pressure of the knurled jaw is applied to
1/4" cable area. 1604-20L and 1625 series have swing latch to help hold
cable in the jaw.
Lewis Sealed Ball Bearing Directional
Boring Swivels prevent equipment’s
rotational torque from interfering with
the product being pulled. In a typical
boring application, the swivel is
attached behind the reamer head
and to the pipe or cable being
pulled through the bore.
Permanently sealed to keep contaminants out, they never require
lubrication.
Ball
Bearing
Part No.
HD-00-S
HD-0-S
HD-1-S
HD-2-S
HD-3-S
HD-4-S
Overall
Length
A (in)
4
5-1/16
6-3/8
7
8-3/4
10-1/8
Dia.
of Pin
B (in)
5/16
7/16
1/2
5/8
3/4
7/8
Jaw
Opening
C (in)
3/8
1/2
1/2
5/8
3/4
7/8
Overall
Dia.
D (in)
7/8
1-1/8
1-3/8
1-5/8
2
2-3/8
Working
Load
(lbs)
1,500
5,400
9,000
12,000
21,000
30,000
JL-R-Series Grips
1604-20L
1625-20
1625-20-7/8
1625-20 1
The JL-R series is designed to be used in secondary light duty cable
pulls. The neoprene cone at the front of the grip helps the grip and cable
go around the tightest bends easily and smoothly. If installed properly, the
cone can also help eliminate possible cable lubricant migration by sealing
off the end of the cable during a pull.
1604-10
1604-20
Cat.
No.
1604-10
1604-20
1604-20L
1625-20
1625-20-7/8
1625-20 1
Min. Cable
Size (in)
14 B&S .06
8 B&S .125
8 B&S .125
1 B&S .28
.38
.50
Part
No.
XS-JL-25-R
XS-JL-50-R
XS-JL-100-R
XS-JL-125-R
Max. Cable
Max. Safe Approx Wt.
Size (in)
Load (lbs) Ea. (lbs)
2 B&S .25
2500
1
Steel Strand .50
5000
2-1/2
Steel Strand .50
5000
2-1/2
Wire Rope .75
8000
3-1/2
Wire Rope .88
8000
3-1/2
Wire Rope 1.00
8000
3-1/2
AWG/B&S Wire Gauges
Diameter of American (AWG) or Brown & Sharpe (B&S) Wire Gauges
American (AWG)
or Brown &
Sharpe (B&S) (in)
.460
.40964
.3648
.32486
.2893
.25763
.22942
.20431
.18194
.16202
.14428
.12849
.11443
.10189
.090742
.080808
.071961
.064084
.057068
.05082
.045257
.040303
.03589
.031961
No. of
Wire
Gauges
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
American (AWG)
or Brown &
Sharpe (B&S) (in)
.028462
.025347
.022571
.0201
.0179
.01594
.014195
.012641
.011257
.010025
.008928
.00795
.00708
.006304
.005614
.005
.004453
.003965
.003531
.003144
U.T.S.
(lbs)
1,200
2,500
2,800
4,500
Working Load
(lbs)
600
1250
1400
2250
Eye
(in)
3-1/2
4
4-1/2
5-1/2
Mesh
(in)
6
8
10
13
Warning:
(1) Make a complete inspection of swivel before each use.
(2) See that end pins match up properly and allen screw is in place.
(3) Rotate swivel by hand to determine proper operation of bearings.
(4) Test complete swivel frequently.
(5) Do not alter or modify unit.
Swivel Eye Grips
The SEG Series are available with
hardened steel rotating eyes.
These eyes are durable, compact,
and streamlined and will thread
through blocks and sheaves without binding.
The rotating eye is not a ball bearing swivel and will not turn
while under tension. It will turn to relieve pulling torque when the
pulling tension is released. If a continual swivel movement is needed,
a ball bearing swivel should be used.
Reference swivel usages per following 1-3 explanations:
1. HD series for overhead and high tension underground.
2. W series for standard underground pulling.
3. HD-S series when a high tension environment is anticipated, coupled
with a need for a sealed swivel: ie. directional boring applications.
In addition, the SEG series can be customized to meet customer specifications. We offer the following options:
A. Special mesh lengths. When a customer would like a different mesh
length than the one specified on the SEG chart.
B. Mesh available in three different types of wire for varying applications
and environments: 1. Galvanized (standard) 2. Plastic coated galvanized 3. Stainless
All inquiries on custom made grips are given our prompt attention.
– continues –
WWW.HANESSUPPLY.COM
19 -89
19
Hand Tools
No. of
Wire
Gauge
0000
000
00
0
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
Size Range
(in)
1/4 - 1/2
1/2 - 3/4
3/4 - 1
1 - 1-1/2
Albany/NE Division:
518.438.0139
Rochester Division:
585.235.0160
Hand Tools
FAX:
FAX:
FAX:
Mesh
Size
Part
Length Range
No.
(in)
(in)
SEG-0
24
1/4 - 1/2
SEG-1
36
1/2 - 1
SEG-2
42
1 - 1-1/2
SEG-3
48
1-1/2 - 2
SEG-4
60
2 - 2-1/2
SEG-5
60
2-1/2 - 3
SEG-6
66
3 - 3-1/2
SEG-7
72
3-1/2 - 4
SEG-8
72
4 - 4-1/2
SEG-9
72
4-1/2 - 5
SEG-10 72
5 - 5-1/2
FAX:
843.238.8337
Model D/Triple Weave - 2-3/4" to 3-1/2"
Working Breaking
Load Strength
(lbs)
(lbs)
1,200
6,000
3,500
10,000
9,600
28,800
11,200 32,000
16,300 49,000
16,700 50,300
16,700 50,300
16,700 50,300
23,300 70,000
23,300 70,000
23,300 70,000
Dimension (in)
A
3-1/4
3-1/2
4-5/8
6-1/2
7-1/2
8
8
8
8-1/2
8-1/2
8-1/2
B
7/8
1
1-3/8
1-5/8
1-7/8
2
2
2
2-1/4
2-1/4
2-1/4
C
3/8
1/2
1/2
5/8
21/32
11/16
11/16
11/16
13/16
13/16
13/16
D
15/32
17/32
43/64
55/64
63/64
1-1/16
1-1/16
1-1/16
1-1/8
1-1/8
1-1/8
E
17/32
5/8
7/8
1
1-3/16
1-1/4
1-1/4
1-1/4
1-3/8
1-3/8
1-3/8
Model D is a heavy duty grip manufactured of Hi-Fatigue Aircraft Strand,
continuous weave process with flexible stress relieving pulling eye. All
strands are plastic coated, which increases the life of the grip, provides a
bearing surface on underground pulls and increases the ease and safety
of installation and removal for workmen.
Size
(in)
Work Load
(lbs)
4,500
2-3/4 to 3-1/2
5,500
Weight
1 lb. 12 oz.
2 lbs. 2 oz.
Mesh Lgth.
(in)
38
46
Weave
Triple
Eye
(in)
3-3/4
Model E/Triple Weave - 3-1/2" to 4-1/4"
Flex-Eye Heavy Duty Grip
Here is a powerful grip for pulling big conductors and it will
travel smoothly through pulleys. It is made of highest quality,
flexible aircraft strand steel, integrated with a new flexible
eye. The eye itself is composed of braided strands (rather
than being rigid) to give it maximum flexibility in going around
angle pulls or through small openings. Strands of the grip are
retained at the head by a stainless steel spring, eliminating a
rigid compression sleeve.
U.T.S.
(lbs)
6,000
12,000
28,800
48,000
57,600
67,200
76,800
86,400
CCISCO: 843.238.1338
Lewis®
Swivel Eye Grips (Continued)
Size Range
(in)
1/4 - 1/2
1/2 - 7/8
7/8 - 1-3/8
1-3/8 - 2
2 - 2-3/4
2-3/4 - 3-1/2
3-1/2 - 4-1/4
4-1/4 - 5
716.826.4412
518.438.5343
585.235.0229
Wk. Ld.
(lbs)
1,200
2,400
5,700
9,600
11,500
13,500
15,300
17,900
Model E is a heavy duty grip manufactured of Hi-Fatigue Aircraft Strand,
continuous weave process with flexible stress relieving pulling eye. All
strands are plastic coated, which increases the life of the grip, provides a
bearing surface on underground pulls and increases the ease and safety
of installation and removal for workman.
Size
Work Load
(in)
(lbs)
Weight
Weave
3-1/2 - 4-1/2
5,500
2 lbs. 5 oz. Triple
6,500
2 lbs. 13 oz.
Mesh Lgth. Eye
(in)
(in)
46
4
52
Model F/Triple Weave - 4-1/4" to 4-7/8"
Model F is a heavy grip manufactured of Hi-Fatigue Aircraft Strand, continuous weave process with flexible stress relieving pulling eye. All strands
are plastic coated, which increases the life of the grip, provides a bearing
surface on underground pulls and increases the ease and safety of installation and removal for workmen.
STANDARD PULLING GRIPS:
Model A/Single Weave or Double Weave - 3/4" to 1-1/4"
Model A Pulling grip is manufactured in both single and double weave
design of Hi-Fatigue plastic coated Aircraft Strand steel cable, and is recommended wherever high strength and small size are required. Patented
pulling eye is flexible stress relieving.
Size
(in)
Work Load
(lbs)
1,000
3/4 - 1-1/4
2,000
Weight
(oz)
5-1/2
8-1/2
Weave
Single
Double
Mesh Lgth.
(in)
18
24
Size
(in)
Work Load
(lbs)
6,000
4-1/4 - 4-7/8
7,000
Weight
2 lbs. 5 oz.
2 lbs. 13 oz.
Weave
Triple
Mesh Lgth.
(in)
52
58
Eye
(in)
4
Model G /Quad Weave - 4-7/8" to 5-1/2"
Eye
(in)
3
Model B/Triple Weave - 1-1/4" to 2"
Model B Pulling Grip is manufactured in both single and double weave
design of Hi-Fatigue plastic coated Aircraft Strand steel cable, and is recommended wherever high strength and small size are required. Patented
pulling eye is flexible stress relieving.
Size
(in)
Work Load
(lbs)
7,300
4-7/8 - 5-1/2
8,300
Weight
(lbs)
8.8
9.6
Weave
4 Wire
Mesh Lgth.
Eye
(in)
(in)
58
6" Braided
64
Model H/Quad Weave - 5-1/2" to 6"
Size
(in)
1-1/4 - 2
Hand Tools
19
Work Load
(lbs)
2,500
3,500
Weight
13 oz.
1 lb. 1 oz.
Weave
Triple
Mesh Lgth.
(in)
26
32
Eye
(in)
3-1/4
Size
(in)
Model C/Triple Weave - 2" to 2-3/4"
Model C Pulling Grip is fabricated of the best grade Hi-Fatigue Aircraft
Strand Plastic coated steel. Continuous fabrication of grip from receiving
end through entire mesh - including eye - provides a flexible stress relieving pulling eye. This exclusive patented feature is used exclusively by
Lewis Manufacturing Co. in grip fabrication.
Size
Work Load
(in)
(lbs)
2 - 2-3/4
3,500
4,500
19 -90
Weight
1 lb. 4 oz.
1 lb. 11 oz.
Weave
Triple
Mesh Length
(lbs)
32
38
Eye
(in)
3-1/2
5-1/2 - 6
Work Load
(lbs)
7,300
8,300
Weight
(lbs)
9.0
9.14
Weave
4 Wire
Mesh Lgth.
Eye
(in)
(in)
58
6" Braided
64
Model I /Quad Weave - 6" to 6-3/4"
Size
(in)
6 - 6-3/4
Work Load
(lbs)
7,300
8,300
WWW.HANESSUPPLY.COM
Weight
(lbs)
9.4
10.2
Weave Mesh Lgth.
Eye
(in)
(lbs)
58
4 Wire
6" Braided
64
Albany/NE Division:
518.438.0139
Rochester Division:
585.235.0160
FAX:
FAX:
FAX:
716.826.4412
518.438.5343
585.235.0229
CCISCO: 843.238.1338
FAX:
843.238.8337
Hand Tools
Lewis
®
Model J/Double Weave - 6-3/4" to 8"
Split Pulling Grips
Rod and Lace Closing
Size
(in)
6-3/4 - 8
Work Load
(lbs)
9,100
10,100
Weight
(lbs)
9.4
10.2
Mesh Lgth.
Eye
(in)
(in)
58
Double
6" Braided
64
Weave
Lewis Snake Grips
The Lewis Snake Grip expands or contracts to grip different or identical
cable and/or rope sizes as per the customer's needs. SAVE time stringing
up, changing and unstringing because the snake requires no special tools.
The swivel and swing link go smoothly through blocks and prevent line
twisting. INSTALL new cable by using old existing cable as pulling line.
Always seize the ends of the grips by banding or taping.
Lewis Type Lsg Wire Rope Snakes
Size
UTS
Regular Size Snakes
Lewis Type LSG 1/4 - 1/2
4,486
Lewis Type LSG 1/2 - 1
7,500
Lewis Type LSG 1 - 1-1/2
10,000
Lewis Type LSG 1-1/2 - 2
12,000
Lewis Type LSG 2 - 2-3/4
16,000
Lewis Type LSG 2-3/4 - 3-1/2
20,000
24,000
Special Size Snakes
Lewis Type LSG 1/4 - 1-1/2
4,486 / 7,500
Lewis Type LSG 1/2 - 1-1/2
7,500 / 10,000
Lewis Type LSG 1/2 - 2
7,500 / 12,000
Lewis Type LSG 1 - 2
10,000 / 12,000
12,000 / 16,000
WK. LD.
1,200
2,500
3,500
4,000
5,000
6,500
8,000
1,200 / 2,500
2,500 / 3,500
2,500 / 4,000
3,500 / 4,000
4,000 / 5,000
Lewis Split Grips - both rod and lace closing - are designed for all phases
of suspension or pulling, where neither end of the conductor is available
and “middle of the run” application of the grip is desired. Head variations
are “DLE” (pictured), “SE” or “U”. Please specify head desired. Working
loads, as listed in the table below, are maximum holding power for the
smallest conductor in each size range.
Model
Grip Size
Work Load
No.
(in)
(lbs)
LSR – .75*
3/4 – 1
600
LSL – .75ø
LSR – 1.00
1 – 1-1/4
750
LSL – 1.00
LSR – 1.25
1-1/4 – 1-1/2
900
LSL – 1.25
LSR – 1.50
1-1/2 – 1-3/4
1100
LSL – 1.50
LSR – 1.75
1-3/4 – 2
1300
LSL – 1.75
LSR – 2.00
2 – 2-1/2
1500
LSL – 2.00
LSR – 2.50
2-1/2 – 3
1700
LSL – 2.50
LSR – 3.00
3 – 3-1/2
1700
LSL – 3.00
LSR – 3.50
3-1/2 – 4
1800
LSL – 3.50
LSR – 4.00
4 – 4-1/2
2000
LSL – 4.00
LSR – 4.50
4-1/2 – 5
2250
LSL – 4.50
LSR – 5.00
5 – 5-1/2
2500
LSL – 5.00
* LSR - Lewis Split Grip, Rod Closing
ø LSL - Lewis Split Grip, Lace Closing
Rod
Closing
Lace
Closing
Heavy Duty Split Grips
Models S-1, S-2, S-3 and S-4
Split Grips are specially designed to pull or support wire or cable already
in place. They are manufactured of Hi-Fatigue Aircraft Strand steel cable
with abrasive resistant plastic coating. All Split Grips are closed with plastic coated stainless steel flexible lacing cable.
PULLING GRIPS:
Model OH
Four Standard Sizes: 1/4" - 1/2"; 3/0-.336 M.C.M.; .477-.795 M.C.M.;
.795-1.000 M.C.M.
Model OH Pulling Grips, designed for the special demands of overhead
stringing crews, has a basket constructed of triple woven nylon coated
Aircraft Strand for maximum abrasive resistance. It has special tough
plastic boots at eye-end to prevent abrasion between the conductor
and pulling dollies. A steel thimble is manufactured into the eye, and is
furnished without swivel or steel thimble on request. It is easily adaptable
to Lewis ball bearing swivels. Uncoated wire gives approximately 20%
more strength. Please specify when ordering.
Size
1/4 – 1/2
3/0 – .336 M.C.M.
.477 – .795 M.C.M.
.795 – 1.000 M.C.M.
Work Load
(lbs)
1,500
3,200
4,100
6,300
Weight
12 oz.
1 lb.
1 lb. 8 oz.
2 lbs.
Weave
Double
Triple
Triple
5-Wire
Mesh Lgth.
(in)
24
42
48
51
Eye
(in)
3
4
4
4
Model R
Size
(in)
3/4 – 1-1/4
S-2
1-1/4 – 1-3/4
S-3
1-3/4 – 2-1/4
S-4
2-1/4 – 2-3/4
Work Load
(lbs)
1,500
2,000
2,000
3,000
2,500
4,000
3,000
5,000
Weight
5 oz.
6 oz.
9 oz.
10 oz.
12 oz.
15 oz.
1 lb.
1 lb. 10 oz.
Weave
Single
Double
Single
Double
Single
Double
Single
Double
Mesh Length
(in)
14
14
18
18
24
24
30
30
Eye
(in)
9
9
11
11
13
13
15
15
Ring & Conduit Riser Grips
Conduit Riser Ring Grips are specially designed to suspend conductor by using the conduit as a means of support. With the conductor
approximately one-half inch above the “in place” position, the grip is
slipped into position and seats on the conduit edge, thus completing the
installation. Ring size permits conduit couplings to be used. The ring and
its components are constructed of solder dipped cast bronze. Spring pins
mounted in the cast ring provide proper spacing between conduit and grip
mesh. The plastic coasted Aircraft Strand cable - plus the flexibility of
design - permits a maximum of line surge without conductor damage.
Patent Nos. 3,216,682 and 3,399,853. Foreign and other patents pending.
Conduit
Size
Work Load
(in)
(lbs)
1/2 – 7/8
3200
7/8 – 1-1/4
4100
Weight
14 oz.
1 lb.
Weave
Triple
Triple
Mesh Length
(in)
36
42
Eye
(in)
4
4
– continues –
WWW.HANESSUPPLY.COM
19 -91
19
Hand Tools
Model R is basically the same grip in size and basket construction as the
Model OH; however, it is some shorter. This grip is employed in pulling all
types of rope.
Model
No.
S-1
Albany/NE Division:
518.438.0139
Rochester Division:
585.235.0160
FAX:
FAX:
FAX:
716.826.4412
518.438.5343
585.235.0229
CCISCO: 843.238.1338
FAX:
843.238.8337
Hand Tools
Lewis®
Conduit Ring Grip Reducer Bushings make it possible for a
small grip to be used with a large conduit until an increase in service is
desired - at which time the small grip
and bushing are extended for further
use, while a larger grip is installed for
the increased service. Patent Nos.
3,216,682 and 3,399,853. Foreign and
other patents pending.
Grip Size (in)
Conduit
Size
(in)
.75
3/4 – 1-1/8
1-1/4
LR 1-1/4 - .75
1,000 lbs.
2-1/2 oz.
LR 1-1/2 – .75
3 oz.
LR 2 - .75
3 oz.
1-1/2
2
1.12
1-1/8 – 1-5/8
1.62
1-5/8 – 2-1/2
2.50
2-1/2 – 3-1/2
3.50
4.50
3-1/2 – 4-1/2 4-1/2 – 5-1/2
LR 2 - 1.12
1,250 lbs.
3-1/2 oz.
2-1/2 LR 2-1/2 - .75 LR 2-1/2 - 1.12 LR 2-1/2 - 1.62
3-1/2 oz.
4 oz.
2,250 lbs*
4-1/2 oz
3
LR 3 - .75
LR 3 - 1.12
LR 3 - 1.62
4 oz.
4-1/2 oz.
6 oz.
3-1/2 LR 3-1/2 - .75 LR 3-1/2 - 1.12 LR 3-1/2 - 1.62 LR 3-1/2 - 2.50
4-1/2 oz.
5 oz.
6-1/2 oz.
3,000 lbs. †
9-1/2 oz.
4
LR 4 - .75
LR 4 - 1.12
LR 4 - 1.62
LR 4 - 2.50
4-1/2 oz.
4-3/4 oz.
6-3/4 oz.
10 oz.
4-1/2 LR 4-1/2 - .75 LR 4-1/2 - 1.12 LR 4-1/2 - 1.62 LR 4-1/2 - 2.50
5 oz.
5-1/2 oz.
7-1/2 oz.
10 oz.
5
LR 5 - .75
LR 5 - 1.12
LR 5 - 1.62
LR 5 - 2.50
LR 5 - 3.50
5-1/2 oz.
6 oz.
8 oz.
11 oz.
4,500 lbs. ‡
15 oz.
6
LR 6 - .75
LR 5 - 1.12
LR 6 - 1.62
LR 6 - 2.50
LR 6 - 3.50 LR 6 - 4.50
7 oz.
8 oz.
11-1/2 oz.
13 oz.
1 oz.
6,000 lbs. ¥
1 lb. 5 oz.
* Maximum in 2-1/2 inch conduit and 2 inch conductor
† Maximum in 3-1/2 inch conduit and 3 inch conductor
‡ Maximum in 4-1/2 inch conduit and 4-inch conductor
¥ Maximum in 6-inch conduit and 5-1/2 inch conductor
Ball Bearing Swivels, Links, Swivel Toggles (continued)
LINK (LW Series). A rigid link
used as a connector for rope,
conductor or wire line. A screwdriver removable pin is provided
in each end.
Swivel Toggle (TW Series). A toggle
used in conjunction with our ball bearing swivel. Provides a 90° “breakover” when pulling through angle
structures or sharp bends in conduit.
Link
Model
LW-1
LW-2
LW-3
LW-4
Length
A (in)
3-1/2
5
6
7
Dia.
D (in)
1-1/4
1-9/16
1-7/8
2-1/8
Jaw
C (in)
5/8
3/4
1
1-1/4
Toggle
Model
TW-1
TW-2
TW-3
TW-4
Length
A (in)
3-1/4
4-3/4
5-3/4
6-3/4
Dia.
D (in)
1-1/4
1-9/16
1-7/8
2-1/8
Jaw
C (in)
5/8
3/4
1
1-1/4
Link
Model
LHD-0
LHD-1
LHD-2
LHD-3
LHD-4
Length
A (in)
3
3-1/2
4-1/4
5-1/4
6-1/4
Dia.
D (in)
1-1/8
1-3/8
1-5/8
2
2-3/8
Jaw
C (in)
1/2
1/2
5/8
3/4
7/8
Toggle
Model
THD-0
THD-1
THD-2
THD-3
THD-4
Length
A (in)
3
3-1/2
4-1/8
5-1/8
6-1/8
Dia.
D (in)
1-1/8
1-3/8
1-5/8
2
2-3/8
Jaw
C (in)
1/2
1/2
5/8
3/4
7/8
Swing Links
Drop forged steel swing links are fabricated from the same high quality
steel as Lewis swivels. They are used for adapting swivels to Lewis grips
and/or winch lines. They are available in sizes
from 1/4-inch to 1/2-inch; other sizes will be
furnished on request.
Type of
Hardware
Swing Link
Size of Eye
(in)
3/8
3/8
9/16
19/32
5/8
Metal Thkns.
(in)
1/4
5/16
3/8
7/16
1/2
Closed
Open
STANDARD FIBER OPTICS
Ball Bearing Swivels, Links, Swivel Toggles
PULLING GRIPS:
Lewis Ball Bearing Swivels
Closed Mesh
Either “W” Series (Regular Duty) or “HD” Series (Heavy Duty) are specifically designed for tension stringing, and assure that conductor will remain
in neutral position during stringing of transmission and distribution lines.
These twin race ball bearing swivels are manufactured from high-grade
pre-stressed steel. Proper placement of thrust and radial bearing allow
thrust and shock loads to be absorbed without affecting rotation of swivel.
Pins are screwdriver removable.
Model
JL-25-FO-CM
JL-37-FO-CM
JL-50-FO-CM
JL-62-FO-CM
JL-75-FO-CM
JL-100-FO-CM
The above pictured ball-bearing swivel is available in Models
W-1, W-2, W-3 and W-4. They are different sizes, specifications
and ratings but they have the same basic design.
Hand Tools
19
Ball Bearing
Swivel
Model
W-1
W-2
W-3
W-4
Ball Bearing
Swivel
Model
HD-00
HD-0
HD-1
HD-2
HD-3
HD-4
– continues –
19 -92
Overall
Length
A (in)
5-1/8
6-11/16
7-3/4
8-15/16
Overall
Length
A (in)
4
5-1/16
6-3/8
7
8-3/4
10-1/8
Dia. of
Pin
B (in)
7/16
1/2
5/8
3/4
Jaw
Opening
C (in)
5/8
7/8
1
1-1/4
Dia. of
Pin
B (in)
5/16
7/16
1/2
5/8
3/4
7/8
Overall
Dia.
D (in)
1-5/16
1-5/8
2
2-1/4
Jaw
Opening
C (in)
3/8
1/2
1/2
5/8
3/4
7/8
This Lewis grip is especially designed for long pulls. It features a continuous single weave design that provides an even pull from the receiving end
through the pulling eye.
The grip is fabricated of coated galvanized aircraft strand for long life
and safety. Each grip has a 24" mesh length for maximum gripping surface.
E
(in)
8
8
8
8
8
8
Grip Size
(in)
1/4 – 3/8
1/4 – 1/2
1/2 – 5/8
5/8 – 3/4
3/4 – 1
1 – 1-1/4
Working Load
(lbs)
600
600
750
750
900
900
Breaking
Strength (lbs)
1,200
1,200
1,500
1,500
1,800
1,800
Split Lace
Working
Load
(lbs)
3,000
5,400
12,000
15,000
Overall
Dia.
D (in)
7/8
1-1/8
1-3/8
1-5/8
2
2-3/8
M
(in)
24
24
24
24
24
24
The Lewis grip has the same long-life easy pulling characteristics as
the closed mesh grip but is for use in any phase of suspension or pulling
when a conductor end is not available. This grip can also be used for
“middle of the run” applications. The lacing is made of coated, steel flexible lacing cable.
Working
Load
(lbs)
1,500
5,400
9,000
12,000
21,000
30,000
Model
JL-25-FO-SL
JL-37-FO-SL
JL-50-FO-SL
JL-62-FO-Sl
JL-75-FO-SL
JL-100-FO-SL
M
(in)
24
24
24
24
24
24
WWW.HANESSUPPLY.COM
E
(in)
8
8
8
8
8
8
Grip Size
(in)
1/4 – 3/8
1/4 – 1/2
1/2 – 5/8
5/8 – 3/4
3/4 – 1
1 – 1-1/4
Working Load
(lbs)
500
500
750
750
900
900
Breaking
Strength (lbs)
1,200
1,200
1,500
1,500
1,800
1,800
Albany/NE Division:
518.438.0139
Rochester Division:
585.235.0160
FAX:
FAX:
FAX:
716.826.4412
518.438.5343
585.235.0229
CCISCO: 843.238.1338
FAX:
843.238.8337
Hand Tools
Lewis
®
Split Rod
MULTI-PURPOSE X-SERIES
Use this Lewis grip, as you would the Split Lace Grip, for “middle of the
run” applications or when neither end of the conductor is available. Same
24" mesh length for maximum gripping surface, same continuous single
weave through the eye for even pulling tension. The rod and eyelets are
made of Hi-Strength steel for durable service.
PULLING GRIPS:
Model
JL-25-FO-SR
JL-37-FO-SR
JL-50-FO-SR
JL-62-FO-SR
JL-75-FO-SR
JL-100-FO-SR
M
(in)
24
24
24
24
24
24
E
(in)
8
8
8
8
8
8
Grip Size
(in)
1/4 – 3/8
1/4 – 1/2
1/2 – 5/8
5/8 – 3/4
3/4 – 1
1 – 1-1/4
Working Load
(lbs)
600
600
750
750
900
900
Breaking
Strength (lbs)
1,200
1,200
1,500
1,500
2,000
2,000
PULLING COLLARS:
(Split grips can be ordered with any style head: HB, U, OE or DLE.)
Split Lace Grip
Use this grip for final adjustments and retensioning or to support or suspend wire. Patented, flexible pulling eye tends to equalize radial loads.
Aircraft strand steel.
(Can be used for overhead or underground
cable or wire rope pulling applications.)
The XS, X and the X-HDFE were designed to simplify the process
of selecting a pulling grip. The entire X series is unique for several
reasons.
1) X model grips can be used overhead or for underground pulls.
2) X model grips incorporate a single wire bail which, when put under
pressure, conforms to even the tightest clearances. The single wire
bail also connects easily with either ball bearing swivels or drop
forged friction swivels.
3) The reverse weave of all X models insures that the grip and cable will
pass smoothly through even the tightest blocks, sheaves, bullwheels,
etc.
4) The X and X Heavy Duty feature metal shoulders installed beneath the
bail. These shoulders allow the grip to be pulled through the most abrasive conduit or other rough environments, and still be used time after
time. These shoulders are color coded to ensure the correct grip size is
selected when making a pull.
When a friction swivel is needX or XS Swivel Size
X or XS Swivel Size
ed for the X-Series Pulling
Models
(in)
Models
(in)
Grips or any other Lewis Pulling
A
5/16
F
3/8
Grip, please refer to the followB
3/8
G
1/2
ing chart. To order a swivel built
C
3/8
H
1/2
into a grip add “W/S” to the end
D
3/8
I
1/2
of the grip part number.
E
3/8
J
1/2
X-Series Grip
Model
FO-25-SL-U
FO-37-SL-U
FO-50-SL-U
FO-62-SL-U
FO-75-SL-U
FO-100-SL-U
M (in.)
(in)
6
6
6
6
6
6
E (in.)
(in)
5
6
6
7
7
8
Grip Size
(in)
1/4 - 3/8
1/4 - 1/2
1/2 - 5/8
5/8 - 3/4
3/4 - 1
1 - 1-1/4
Working Load
(lbs)
500
500
600
600
750
750
Breaking
Strength (lbs)
1,000
1,000
1,250
1,250
1,500
1,500
Split Rod Grip
Use this grip as the Split Lace. Patented, flexible pulling eye. Aircraft
strand steel. Heavy-duty steel rod and eyelets maintain their shape for
repeated threadings.
Model
FO-25-SR-U
FO-37-SR-U
FO-50-SR-U
FO-62-SR-U
FO-75-SR-U
FO-100-SR-U
M (in.)
(in)
6
6
6
6
6
6
E (in.)
(in)
5
6
6
7
7
8
Grip Size
(in)
1/4 - 3/8
1/4 - 1/2
1/2 - 5/8
5/8 - 3/4
3/4 - 1
1 - 1-1/4
Working Load
(lbs)
500
500
600
600
750
750
Breaking
Strength (lbs)
1,000
1,000
1,250
1,250
1,500
1,500
The X-Series Grip are color coded for quick identification and organized
storage. They are plastic-coated which increases the life of the grip, provides a more effective gripping surface, and reduces injuries due to frayed
or mangled wire in the pulling grip itself.
The grip is designed with the ball bearing swivel user in mind. The single
wire eye allows a swivel to be attached to the grip easily, and helps to
alleviate any binding that may occur in the throat of the swivel during a
pull. The X model grip also offers a backwards weave that (1) adds pulling
surface to the grip itself, and (2) allows the grip to pass through even the
tightest of clearances. The X series features metal sleeves near the top of
the grip to eliminate wear when pulling through clay conduit, gravel or
other abrasive pulling environments. This series is constructed with galvanized wire, but can be ordered with stainless steel at additional cost.
Range
(in)
3/4 - 1-1/4"
3/4 - 1-1/4
3/4 - 1-1/4
3/4 - 1-1/4
1-1/4 - 2
1-1/4 - 2"
2 - 2-3/4
2 - 2-3/4
2-3/4 - 3-1/2
2-3/4 - 3-1/2
3-1/2 - 4-1/4
3-1/2 - 4-1/4
4-1/4 - 4-7/8
4-1/4 - 4-7/8
4-7/8 - 5-1/2
4-7/8 - 5-1/2
5-1/2 - 6
5-1/2 - 6
6 - 6-3/4
6 - 6-3/4
6-3/4 - 8
6-3/4 - 8
WWW.HANESSUPPLY.COM
Color
Code
Lt. Blue
Red
Purple
Orange
Green
Black
Yellow
Brown
Turquoise
Aluminum
Wk. Ld.
(lbs)
1,000
1,500
1,700
2,000
2,500
2,500
3,500
4,500
4,500
5,500
5,500
6,500
6,000
7,000
15,000
15,000
15,000
15,000
15,000
15,000
16,500
16,500
Ultimate
Tensile
(lbs)
3,000
3,500
3,400
6,000
7,500
7,500
10,500
13,500
13,500
16,500
16,500
19,500
18,000
21,000
30,000
30,000
30,000
30,000
30,000
30,000
33,000
33,000
Mesh
(in)
18
18
24
24
26
32
32
38
38
46
46
52
52
58
58
64
58
64
58
64
58
64
Eye
(in)
5
5
5
5
6
6
7
7
7
7
8
8
9
9
10
10
10
10
10
10
10
10
19 -93
19
Hand Tools
Part
No.
X-A-SW-18"
X-A-DW-18"
X-A-SW-24"
X-A-DW-24"
X-B-TW-26"
X-B-TW-32"
X-C-TW-32"
X-C-TW-38"
X-D-TW-38"
X-D-TW-46"
X-E-TW-46"
X-E-TW-52"
X-F-TW-52"
X-F-TW-58"
X-G-TW-58"
X-G-TW-64"
X-H-TW-58"
X-H-TW-64"
X-I-TW-58"
X-I-TW-64"
X-J-TW-58"
X-J-TW-64"
Albany/NE Division:
518.438.0139
Rochester Division:
585.235.0160
FAX:
FAX:
FAX:
716.826.4412
518.438.5343
585.235.0229
CCISCO: 843.238.1338
FAX:
843.238.8337
Hand Tools
Lewis®
XS-Series Grip
Offset Eye Grip
These grips feature coated galvanized cable, reverse weave and a single
wire bail but will not have metal shoulders. XS series grips are identified
by tags beneath the heavy duty clear tubing. The XS series is designed for
normal working conditions.
The Offset Eye series is most commonly used in cable placement applications. Use the OE series when a DLE, U or HB model is unsuitable. The
offset eye may also be used as a suspensions grip. If a split grip is needed, add the following to the end of the part number: “SL” for split lace or
“SR” for split rod. Add “SS” to the end of the part number if stainless steel
mesh is desired.
Part
No.
XS-A-SW-18"
XS-A-DW-18"
XS-A-SW-24"
XS-A-DW-24"
XS-B-TW-26"
XS-B-TW-32"
XS-C-TW-32"
XS-C-TW-38"
XS-D-TW-38"
XS-D-TW-46"
XS-E-TW-46"
XS-E-TW-52"
XS-F-TW-52"
XS-F-TW-58"
XS-G-TW-58"
XS-G-TW-64"
XS-H-TW-58"
XS-H-TW-64"
XS-I-TW-58"
XS-I-TW-64"
XS-J-TW-58"
XS-J-TW-64"
Range
(in)
3/4 - 1-1/4
3/4 - 1-1/4
3/4 - 1-1/4
3/4 - 1-1/4
1-1/4 - 2
1-1/4 - 2
2 - 2-3/4
2 - 2-3/4
2-3/4 - 3-1/2
2-3/4 - 3-1/2
3-1/2 - 4-1/4
3-1/2 - 4-1/4
4-1/4 - 4-7/8
4-1/4 - 4-7/8
4-7/8 - 5-1/2
4-7/8 - 5-1/2
5-1/2" - 6
5-1/2" - 6
6 - 6-3/4
6 - 6-3/4
6-3/4 - 8
6-3/4 - 8
Wk. Ld.
(lbs)
1,000
1,500
1,700
2,000
2,500
2,500
3,500
4,500
4,500
5,500
5,500
6,500
6,000
7,000
15,000
15,000
15,000
15,000
15,000
15,000
16,500
16,500
Ultimate
Tensile
(lbs)
3,000
3,500
3,400
6,000
7,500
7,500
10,500
13,500
13,500
16,500
16,500
19,500
18,000
21,000
30,000
30,000
30,000
30,000
30,000
30,000
33,000
33,000
Mesh
(in)
18
18
24
24
26
32
32
38
38
46
46
52
52
58
58
64
58
64
58
64
58
64
Eye
(in)
5
5
5
5
6
6
7
7
7
7
8
8
9
9
10
10
10
10
10
10
10
10
Heavy Duty X Model Grip
These grips are designed for large work loads and rugged conditions. The
following heavy duty X models incorporate the use of exceptionally strong
mesh, reverse weave, single wire bail and abrasion-resistant metal shoulders. Heavy Duty X models are constructed of uncoated aircraft strand galvanized wire.
Part #
Color
No.
Code
X-HDFE-1/4 - 1/2"
Brown
X-HDFE-1/2 - 7/8"
Yellow
X-HDFE-7/8 - 1-3/8"
Black
X-HDFE-1-3/8 - 2"
Green
X-HDFE-2 - 2-3/4"
Orange
X-HDFE-2-3/4 - 3-1/2" Purple
X-HDFE-3-1/2 - 4-1/4
Red
X-HDFE-4-1/4 - 5"
Lt. Blue
Wk. Ld.
Ultimate
(lbs) Tensile (lbs)
1,200
6,000
2,400
12,000
5,700
28,800
9,600
48,000
11,500
56,600
13,500
67,200
15,300
76,800
17,900
86,400
Mesh
(in)
22
42
48
50
52
54
56
58
Eye
(in)
6
8
9
9
9
9
9
9
SPECIAL APPLICATION
SUSPENSION GRIPS:
Hook Bail Grip
The Hook Bail Series is used when a connection cannot be made with a
U-Bail. The hook bail series is available in split lace or split rod configurations. If a split grip is needed, add the following to the end of the part
number: “SL” for split lace or “SR” for split rod. Add “SS” to the end of the
part number of stainless steel mesh is desired.
Hand Tools
19
Part
Range
No.
(in)
Single Weave
HB-25-SW
1/4 – 3/8
HB-37-SW
3/8 – 1/2
HB-50-SW
1/2 – 5/8
HB-62-SW
5/8 – 3/4
HB-75-SW
3/4 – 1-1/8
HB-100-SW
3/4 – 1-1/4
HS-112-SW 1-1/8 – 1-5/8
HB-162-SW 1-5/8 – 2-1/2
HB-250-SW 2-1/2 – 3-1/2
HB-350-SW 3-1/2 – 4-1/2
HB-450-SW 4-1/2 – 5-1/2
Double Weave
HB-50-DW
1/2 – 5/8
HB-62-DW
5/8 – 3/4
HB-75-DW
3/4 – 1-1/8
HB-100-DW
3/4 – 1-1/4
HB-112-DW 1-1/8 – 1-5/8
HB-162-DW 1-5/8 – 2-1/2
HB-250-DW 2-1/2 – 3-1/2
HB-350-DW 3-1/2 – 4-1/2
HB-450-DW 4-1/2 – 5-1/2
19 -94
Wk. Ld.
(lbs)
UTS
(lbs)
Mesh
(in)
Eye
(in)
500
500
500
500
1,000
1,000
1000
2,250
3,000
4,500
6,000
1,000
1,000
1,000
1,000
2,000
2,000
2,500
5,000
6,000
9,000
12,000
6
6
8
10
12
14
14
16
18
20
22
4
4-1/2
4-1/2
5
5
6
7
7
8
8
8
1,000
1,000
2,000
2,000
3,000
5,000
6,000
9,000
12,000
2,000
2,000
4,000
4,000
6,000
10,000
12,000
18,000
24,000
8
10
12
14
14
16
18
20
22
4-1/2
5
5
6
7
7
8
8
8
Part
Range
Wk. Ld.
No.
(in)
(lbs)
Single Weave
OE-25-SW
1/4 – 3/8
500
OE-37-SW
3/8 – 1/2
500
OE-50-SW
1/2 – 5/8
500
OE-62-SW
5/8 – 3/4
500
OE-75-SW
3/4 – 1-1/8
1,000
OE-100-SW
3/4 – 1-1/4
1,000
OE-112-SW 1-1/8 – 1-5/8 1,000
OE-162-SW 1-5/8 – 2-1/2 2,250
OE-250-SW 2-1/2 – 3-1/2 3,000
OE-350-SW 3-1/2 – 4-1/2 4,500
OE-450-SW 4-1/2 – 5-1/2 6,000
Double Weave
OE-50-DW
1/2 – 5/8
1,000
OE-62-DW
5/8 – 3/4
1,000
OE-75-DW
3/4 – 1-1/8
2,000
OE-100-DW
3/4 – 1-1/4
2,000
OE-112-DW 1-1/8 – 1-5/8 3,000
OE-162-DW 1-5/8 – 2-1/2 5,000
OE-250-DW 2-1/2 – 3-1/2 6,000
OE-350-DW 3-1/2 – 4-1/2 9,000
OE-450-DW 4-1/2 – 5-1/2 12,000
UTS
(lbs)
Mesh
(in)
Eye
(in)
1,000
1,000
1,000
1,000
2,000
2,000
2,500
5,000
6,000
9,000
12,000
6
7
8
10
12
14
14
16
18
20
22
4
4
4-1/2
5
5
5-1/2
6
7
8-1/2
8-1/2
10
2,000
2,000
4,000
4,000
6,000
10,000
12,000
18,000
24,000
8
10
12
14
14
16
18
20
22
4-1/2
5
5
5-1/2
6
7
8-1/2
8-1/2
10
Dual Lift Eye Grip
The Dual Lift Eye series is most commonly used in cable placement applications. Use the DLE series when a OE, U or HB model is unsuitable. The
DLE may also be used as a suspension grip. If a split grip is needed, add
the following to the end of the part number: “SL” for split lace or “SR” for
split rod. Add “SS” to the end of the part number if stainless steel mesh is
desired.
Part
No.
Single Weave
DLE-25-SW
DLE-37-SW
DLE-50-SW
DLE-62-SW
DLE-75-SW
DLE-100-SW
DLE-112-SW
DLE-162-SW
DLE-250-SW
DLE-350-SW
DLE-450-SW
Double Weave
DLE-50-DW
DLE-62-DW
DLE-75-DW
DLE-100-DW
DLE-112-DW
DLE-162-DW
DLE-250-DW
DLE-350-DW
DLE-450-DW
Range
(in)
Wk. Ld.
(lbs)
UTS
(lbs)
Mesh
(in)
Eye
(in)
1/4 – 3/8
3/8 – 1/2
1/2 – 5/8
5/8 – 3/4
3/4 – 1-1/8
3/4 – 1-1/4
1-1/8 – 1-5/8
1-5/8 – 2-1/2
2-1/2 – 3-1/2
3-1/2 – 4-1/2
4-1/2 – 5-1/2
500
500
500
500
1,000
1,000
1,000
2,250
3,000
4,500
6,000
1,000
1,000
1,000
1,000
2,000
2,000
2,500
5,000
6,000
9,000
12,000
6
7
8
10
12
14
14
16
18
20
22
4
4
4-1/2
5
5
5-1/2
6
7
8-1/2
8-1/2
10
1/2 – 5/8
5/8 – 3/4
3/4 – 1-1/8
3/4 – 1-1/4
1-1/8 – 1-5/8
1-5/8 – 2-1/2
2-1/2 – 3-1/2
3-1/2 – 4-1/2
4-1/2 – 5-1/2
1,000
1,000
2,000
2,000
3,000
5,000
6,000
9,000
12,000
2,000
2,000
4,000
4,000
6,000
10,000
12,000
18,000
24,000
8
10
12
14
14
16
18
20
22
4-1/2
5
5
5-1/2
6
7
8-1/2
8-1/2
10
Cord Cap Grip
These grips are used to prevent electrical
cords from pulling out of cord caps.
Part #
No.
CC-50
CC-62
CC-75
CC-100
Range
(in)
1/2 – 5/8
5/8 – 3/4
3/4 – 1-1/8
3/4 – 1-1/4
WWW.HANESSUPPLY.COM
Wk. Ld.
(lbs)
500
500
1,000
1,000
UTS
(lbs)
1,000
1,000
2,000
2,000
Mesh
(in)
4-3/4
6
8
10
Albany/NE Division:
518.438.0139
Rochester Division:
585.235.0160
FAX:
FAX:
FAX:
716.826.4412
518.438.5343
585.235.0229
CCISCO: 843.238.1338
FAX:
843.238.8337
Hand Tools
Lewis
®
Inline Horizontal Support Grip (continued)
U-Bail Suspension Grip
These grips are constructed of galvanized wire and are used for bus
drops and general suspension. The standard and heavy-duty models
feature plastic coated wire mesh which provides a much more dependable
gripping surface.
Part
Range
No.
(in)
Light Weight
U-25-SWB-PGE
1/4 – 3/8
U-37-SWB-PGE
3/8 – 1/2
U-50-SWB-PGE
1/2 – 5/8
U-62-SWB-PGE
5/8 – 3/4
U-75-SWB-PGE
3/4 – 1-1/8
U-100-SWB-PGE
3/4 – 1-1/4
U-112-SWB-PGE
1-1/8 – 1-5/8
U-162-SWB-PGE
1-5/8 – 2-1/2
U-250-SWB-PGE
2-1/2 – 3-1/2
Standard Duty - Single Weave
U-50-SWB-SW
1/2 – 5/8
U-62-SWB-SW
5/8 – 3/4
U-75-SWB-SW
3/4 – 1-1/8
U-100-SWB-SW
3/4 – 1-1/4
U-112-SWB-SW
1-1/8 – 1-5/8
U-162-SWB-SW
1-5/8 – 2-1/2
U-250-SWB-SW
2-1/2 – 3-1/2
U-350-SWB-SW
3-1/2 – 4-1/2
U-450-SWB-SW
4-1/2 – 5-1/2
Heavy Duty - Double Weave
U-50-SWB-DW
1/2 – 5/8
U-62-SWB-DW
5/8 – 3/4
U-75-SWB-DW
3/4 – 1-1/8
U-100-SWB-DW
3/4 – 1-1/4
U-112-SWB-DW
1-1/8 – 1-5/8
U-162-SWB-DW
1-5/8 – 2-1/2
U-250-SWB-DW
2-1/2 – 3-1/2
U-350-SWB-DW
3-1/2 – 4-1/2
U-450-SWB-DW
4-1/2 – 5-1/2
Wk. Ld.
(lbs)
UTS
(lbs)
Mesh
(in)
Eye
(in)
500
500
500
500
1,000
1,000
1,000
2,250
3,000
1,000
1,000
1,000
1,000
2,000
2,000
2,500
5,000
6,000
5
6
8
10
12
14
14
16
18
5-1/2
5-1/2
6
7
8
9
10
16
18
500
500
1,000
1,000
1,000
2,250
3,000
4,500
6,000
1,000
1,000
2,000
2,000
2,500
5,000
6,000
9,000
12,000
8
10
12
14
14
16
18
20
22
6
7
8
9
10
16
18
20
20
1,000
1,000
2,000
2,000
3,000
5,000
6,000
9,000
12,000
2,000
2,000
4,000
4,000
6,000
10,000
12,000
18,000
24,000
8
10
12
14
14
16
18
20
22
6
7
8
9
10
16
18
20
20
This series of grips is designed to permanently support
cable in conduit. Special hooked ends hook over conduit,
eliminating the need for a bushing. The LRHB series is
available in split lace or split rod configurations. For split
lace, add “SL” to the end of the part number. For split rod,
add “SR.” Split grips are used when ends of cable are not
available.
Range
(in)
Wk. Ld.
(lbs)
UTS
(lbs)
Mesh
(in)
1/2 – 5/8
5/8 – 3/4
3/4 – 1-1/8
3/4 – 1-1/4
1-1/8 – 1-5/8
1-5/8 – 2-1/2
2-1/2 – 3-1/2
3-1/2 – 4-1/2
4-1/2 – 5-1/2
500
500
1,000
1,000
1,000
2,250
3,000
4,500
6,000
1,000
1,000
2,000
2,000
2,500
5,000
6,000
9,000
12,000
8
10
12
14
14
16
18
20
22
Inline Horizontal Support Grip
UTS
(lbs)
500
500
1,000
1,000
1,000
2,250
3,000
4,500
6,000
1,000
1,000
2,000
2,000
2,500
5,000
6,000
9,000
12,000
500
500
1,000
1,000
1,000
2,250
3,000
4,500
6,000
1,000
1,000
2,000
2,000
2,500
5,000
6,000
9,000
12,000
Fitted Bus Drop Strain Relief Grips
Application: Yields a liquid tight and strain relief termination for flexibletype neoprene, hypolon and PVC jacketed power or control cord and
cable. For use in wet or dry locations sealing electrical connections against
dust and dirt, oil, water or other circumstances involving moisture.
Features: Available in Aluminum construction to meet the specifications
of demanding service on all types of machinery and in all non-hazardous
areas. Part numbers are clearly stamped into metal connector. The wire
mesh combined with the Neoprene sealing grommet provides strain relief
protecting internal wiring connections against outside tension on cable or
cord.
Cat.
Conduit Size
No.
(in)
FBDM-1
1/4
FBDM-2
1/4
FBDM-3
3/8
FBDM-4
3/8
FBDM-5
3/8
FBDM-6
1/2
FBDM-7
1/2
FBDM-8
1/2
FBDM- 9
1/2
FBDM-10
1/2
FBDM-11
1/2
FBDM-12
3/4
FBDM-13
3/4
FBDM-14
3/4
FBDM-15
3/4
FBDM-16
3/4
FBDM-17
3/4
FBDM-18
1
FBDM-19
1
FBDM-20
1
FBDM-21
1
FBDM-22
1
FBDM-23
1
FBDM-24
1-1/4
FBDM-25
1-1/4
FBDM-26
1-1/4
FBDM-27
1-1/4
FBDM-28
1-1/4
FBDM-29
1-1/4
FBDM-30
1-1/2
FBDM-31
1-1/2
FBDM-32
2
FBDM-33
2
FBDM-34
2-1/2
FBDM-35
2-1/2
FBDM-36
3
FBDM-37
3
FBDM-38
3-1/2
FBDM-39
3-1/2
FBDM-40
4
FBDM-41
4
WWW.HANESSUPPLY.COM
Cord or
Cable Size
.060 to .156
.156 to .250
.125 to .187
.187 to .312
.312 to .437
.125 to .187
.187 to .312
.312 to .437
.375 to .500
.500 to .625
.625 to .750
.125 to .250
.250 to .375
.375 to .500
.500 to .625
.625 to .750
.750 to .875
.375 to .500
.500 to .625
.625 to .750
.750 to .875
.875 to 1.000
1.000 to 1.125
.750 to .875
.875 to 1.000
1.000 to 1.125
1.125 to 1.250
1.250 to 1.375
1.375 to 1.500
1.156 to 1.312
1.281 to 1.531
1.531 to 1.780
1.650 to 2.000
2.000 to 2.343
2.250 to 2.500
2.500 to 2.843
2.687 to 3.062
3.000 to 3.390
3.281 to 3.515
3.500 to 3.583
3.750 to 4.000
19
Hand Tools
These grips are designed to support horizontal industrial lines or cords
and are constructed of high grade coated
galvanized wire for long life and reliability.
The inline series is available in closed,
split rod or split lace mesh configurations.
Split rod is indicated by
“SR”, split lace is
denoted by “SL”.
Closed mesh has
neither SL or SR included
in the part number
(example: IH-50-SW).
– continues –
Wk. Ld.
(lbs)
Male Threads
Lewis Riser Hook Bail Grip
Part
No.
Single Weave
LRHB-50-SW
LRHB-62-SW
LRHB-75-SW
LRHB-100-SW
LRHB-112-SW
LRHB-162-SW
LRHB-250-SW
LRHB-350-SW
LRHB-450-SW
Part
Range
No.
(in)
Closed Mesh
IH-50-SW
1/2 – 5/8
IH-62-SW
5/8 – 3/4
IH-75-SW
3/4 – 1-1/8
IH-100-SW
3/4 – 1-1/4
IH-112-SW
1-1/8 – 1-5/8
IH-162-SW
1-5/8 – 2-1/2
IH-250-SW
2-1/2 – 3-1/2
IH-350-SW
3-1/2 – 4-1/2
IH-450-SW
4-1/2 – 5-1/2
Split Mesh Lace Closing
IH-50-SW-SL
1/2 – 5/8
IH-62-SW-SL
5/8 – 3/4
IH-75-SW-SL
3/4 – 1-1/8
IH-100-SW-SL
3/4 – 1-1/4
IH-112-SW-SL 1-1/8 – 1-5/8
IH-162-SW-SL 1-5/8 – 2-1/2
IH-250-SW-SL 2-1/2 – 3-1/2
IH-350-SW-SL 3-1/2 – 4-1/2
IH-450-SW-SL 4-1/2 – 5-1/2
19 -95
Albany/NE Division:
518.438.0139
Rochester Division:
585.235.0160
FAX:
FAX:
FAX:
716.826.4412
518.438.5343
585.235.0229
CCISCO: 843.238.1338
FAX:
843.238.8337
Hand Tools
MARSHALLTOWN®
Pointing Trowels
MARSHALLTOWN®
BRICKLAYING TOOLS
Philadelphia Pattern Brick Trowels
• Philadelphia pattern trowels are better suited for laying block
because they allow more mortar to be placed on the blade
EDI
10805
Part#
BT305
UPC#
035965008051
Size
11 x 5-1/2
Box
4
• Forged from a single piece of highest grade tool steel
for unsurpassed strength
• Hardwood handle with polished steel ferrule is
securely attached
• Versatile tool
• Made in the U.S.A.
EDI
11122
Case
12
Part#
454.5
UPC#
Size
035965011228 4-1/2 x 2-1/4
Box
6
Case
72
Pointing Trowels
London Pattern Brick Trowels
• Forged in one piece from high grade tool steel
• Tempered, then taper ground and polished
from toe to heel
• Hardwood handle and metal ferrule are
securely attached
• London pattern trowels are designed for laying brick
• Rounded heel shapes the blade so that the mortar
is carried a little further forward on the blade
EDI
10802
Part#
BT302
UPC#
035965008020
Size
11-1/2 x 5
Box
4
Case
12
EDI
10820
Tuck Pointers
• Forged in one piece
• Tapered for the required sturdiness and correct flexibility
• High shank and high lift give plenty of hand room
• Hardwood handle with metal ferrule is
securely attached
EDI
11305
11306
11307
Part#
505
506
507
UPC#
035965013055
035965013062
035965013079
Size
6-3/4 x 3/8
6-3/4 x 1/2
6-3/4 x 5/8
Box
6
6
6
Case
72
72
72
Size
5 x 2-1/2
Box
6
• Forged in one piece from high grade tool steel
• Tempered, then taper ground and polished
from toe to heel
• Hardwood handle and metal ferrule are
securely attached
Part#
MT315
MT316
UPC#
035965008150
035965008167
Size
5 x 1-1/2
5x2
Box
6
6
Gauging Trowels
• Forged, then ground and tapered to give the correct
flexibility and required sturdiness
• Hardwood handle with metal ferrule is securely attached
• Plenty of hand room is provided by the high
shank and lift
• Made from high grade tool steel
• Blade is fully tempered, ground and polished
• Hardwood handle and metal ferrule is
securely attached
• Used for mixing or “gauging” small quantities
of quick setting plaster
Part#
TP326
TP327
UPC#
035965008266
035965008273
Size
6-3/4 x 3/8
6-3/4 x 1/2
Box
6
6
Case
24
24
EDI
17927
• Made from high carbon steel
• Brick joiners have a convex face for
striking concave joints
• Each end is a different size for making
different size joints
• Tooled joints are recommended for exterior applications because the
joiner compacts the mortar to keep moisture from penetrating the joint
• Concave joint helps conceal small irregularities in laying and emphasizes
the pattern
• Made in U.S.A.
EDI
15522
15526
Part#
UPC#
80 035965055222
82 035965055260
Joint Size
1/2 & 5/8
5/8 & 3/4
Length
10-1/2"
10-1/2"
Box Case
6
72
6
72
• Made of carbon steel that is tempered, hardened,
and polished
• Each end makes a different size rounded joint
• Tooled joints are recommended for exterior applications
because the jointer compacts the mortar to keep
moisture from penetrating the joint
• Concave joint helps conceal small irregularities in laying
and emphasizes the pattern
19 -96
Joint Size
1/2 & 5/8
3/8 & 1/2
Length
10-1/2"
10-1/2"
Part#
GT738
UPC#
035965079273
Size
7 x 3-3/8
Box
6
Case
24
24
Case
72
Joint Raker
• Large 1 3/4" skate wheels
• Strong aluminum handle is contoured to fit the
hand and squared off at te end
• Hardened nail, adjustable to the proper depth,
can be securely tightened by slipping the nail
in the eye of a spade bolt and twisting
EDI
15502
Part#
89
UPC#
035965055024
Size
8-1/2 x 3
Box
3
Case
36
Brick Tongs
Brick Jointers
EDI
Part#
UPC#
10830 BJ330 035965008303
10831 BJ331 035965008310
Case
24
Margin Trowels
EDI
10815
10816
Brick Jointers
Hand Tools
UPC#
035965008204
Tuck Pointers
EDI
10826
10827
19
Part#
PT320
• Heavy duty tongs designed and built for long
wear
• Can be quickly adjusted to carry from six to
ten bricks
• Tongs are maintenance free
EDI
16510
Part#
88
UPC#
035965065108
Box Case
6
72
6
72
WWW.HANESSUPPLY.COM
Size
16"
Box
1
Case
12
Albany/NE Division:
518.438.0139
Rochester Division:
585.235.0160
FAX:
FAX:
FAX:
716.826.4412
518.438.5343
585.235.0229
CCISCO: 843.238.1338
FAX:
843.238.8337
Hand Tools
MARSHALLTOWN
®
Masonry Brush
Concrete Edger
• Bristles made of white tampico fiber
• 4" bristles are set securely in hardwood block
• Sturdy steel mounting with a smooth
comfortable handle securely attached
• Both ends are curved up for use in
either direction
• Used to produce a radius at the edge of
a concrete slab to help prevent the edge
from chipping off
• One of the basic concrete finisher’s tools
• Has the most popular combination of radius, lip and blade dimensions
EDI
16520
Part#
829
UPC#
035965065207
Size
6-1/2 x 2
Box
1
Case
12
Grout Bags
•
•
•
•
•
•
Made of black vinyl
Bag is seamless
Used for holding and depensing grout or mortar
Available with or without a 3/8" metal tip
Replacement tip sold separately
Made in the U.S.A.
EDI
17818
17819
Part#
GB692
RT693
UPC#
Size
035965078184 12 x 24-w/Tip
035965078191
Tip Only
Box
1
1
EDI
13824
Case
72
72
EDI
13950
• Cast aluminum mounting securely riveted
to tempered, polished steel blade
• Mounting has a square shank to prevent
handle from turning
• Curved handle gives extra knuckle room
UPC#
035965038010
035965038027
035965038034
Size
12 x 4
14 x 4
16 x 4
Size
6x3
Radius
3/8"
Lip
1/2"
Box
6
Case
36
• Blade is heavy gauge 301 premium stainless
steel
• Both ends are curved up for use in
either direction
• Comfortable handle securely attached
Finishing Trowels
Part#
FT362
FT363
FT364
UPC#
035965038249
Stainless Steel Curved
End Edger
CONCRETE FINISHING TOOLS
EDI
13801
13802
13803
Part#
CE384
Part#
UPC#
Size
Radius
Lip
Box
Case
CE535S
035965039505
6x3
1/4"
3/8"
1
1
Box
1
Case
12
Steel Groover
Box
4
4
4
• Sturdy steel mounting
• Properly shaped bit and leading edge cut a
sharp groove and finishes clean
• Smooth comfortable handle is securely attached
• Cuts 1/2" x 1/2" groove
Case
12
12
12
EDI
Part#
UPC#
Size
Box
Case
13836
CG396
035965038362
6x3
6
36
Heavy-Duty Zinc Groovers
High Carbon Blue Steel Pool Trowels
• Made from high quality long wearing zinc,
harder than bronze
• Smooth finish allows for easier cleanup
• Finely finished to cut sharp clean grooves
• Dimensionally more consistent than bronze
• Short aluminum alloy mounting and a curved
hardwood handle
• Blade is flexible enough to blend to almost
any radius
• Made in the U.S. A.
EDI
13115
13127
Part#
UPC#
Size
Box
Case
PT144B
PT164B
035965031158
035965031271
14 x 4
16 x 4-1/2
4
4
12
12
EDI
14106
Part#
834
UPC#
035965041065
Bit Size
3/4 x 3/8
Blade Size
6 x 4 1/2
Magnesium Floats, Beveled Ends
Straight End Stainless Steel Edgers
• Blade is made of heavy gauge 301 premium
stainless steel
• Sturdy mounting with comfortable handle
securely attached
• Used to produce a radius at the edge of
a concrete slab to help prevent the edge
from chipping off
• Made in the U.S. A.
Part#
161SS
185SS
196SS
UPC#
035965042284
035965042864
035965042963
Size
6x6
8x6
10 x 4
Radius
1/8"
3/8"
1"
Lip
1/4"
1/2"
1-1/8"
Box
6
6
6
Case
6
6
6
EDI
14606
14604
14610
14602
Part#
142
145
145D
146
WWW.HANESSUPPLY.COM
UPC#
035965046060
035965046046
035965046107
035965046022
Size
12 x 3-1/8
16 x 3-1/8
16 x 3-1/8
20 x 3-1/8
Box
1
2
2
2
19
Hand Tools
EDI
14228
14286
14296
• Extruded from very hard, durable, lightweight magnesium
• Our most popular float design
• Comfortable handle is positioned to give
the tool perfect balance
• Handles are secured with torque pad
screws that will not back out
• Assist the user in preparing the surface
for troweling
• If a float (rough) finish is desired, floating is
the final operation
• Recommended for use with air entrained concrete
• Magnesium floats produce a smoother finish than wood
• “SH” indicates structural foam handle
• “D” indicates DuraSoft® handle, provides a soft feel,
reduces fatigue and offers excellent durability
• U.S. Patent No. 5,781,956 for DuraSoft® Handle
Case
12
24
24
12
19 -97
Albany/NE Division:
518.438.0139
Rochester Division:
585.235.0160
FAX:
FAX:
FAX:
716.826.4412
518.438.5343
585.235.0229
CCISCO: 843.238.1338
FAX:
843.238.8337
Hand Tools
MARSHALLTOWN®
Magnesium Bull Floats
Auto-Just® Bull Float Bracket
• Extruded from magnesium alloy
• Lightweight, long wearing
• MB42, MB48 and MB48R come
with bracket assembly
• “R” indicates round ends
• This truly unique bracket actually changes pitch
automatically by just pushing and pulling
• Eliminates twisting, turning, raising and lowering
when floating concrete
• Either screw type or push button handles may
be used
• Push button handle requires an adapter
• Universal mounting plate is included-fits all two
and four hole bull floats
• U.S. Patent No. 4,722,637
EDI
13875
13873
Part#
UPC#
Size
Box
Case
MB48R
MB48B
035965038751
035965038737
48 x 8
48 x 8
(Blade Only)
1
3
1
3
Bull Float Bracket
Replacement Parts
EDI
Part#
UPC#
Size
Box
Case
14800
AB4
035965048002
N/A
1
1
Handle Sections
• Fits most four hole bull floats
EDI
Part#
UPC#
Description
19166
A3003
035965091664
Complete Assembly
Box Case
1
1
Universal Mounting Plate
• Adapts bull floats and brackets to a two or
four hole mounting
• Can be used with the Auto-Just® bull float
bracket and similar brackets made by others
EDI
EDI
Part#
UPC#
Size
Box
Case
19176
A3008
035965091763
N/A
1
1
• Bracket will operate a fresno with a bull float
handle bracket
Part#
UPC#
Description
13749
3749
035965137492
Bracket Adapter
Box Case
1
UPC#
Size
14802 B5 60
035965048026
5'
1-3/4"
1
6
14804 B5 72
035965048040
6'
1-3/4"
1
6
1
EDI
Part#
UPC#
Size
13867 FH427 035965038676
Diameter Box Case
5'
1-3/8"
Rotaleveler® Bull Float Bracket
Wood Floats
• Fits any bull float without adapters
• Features easy control adjustment, smooth operation,
and a large protected grease reservoir
• Accepts most 1 3/4" and 1 3/8" push button handles
without adapters
• Easier to keep clean than most competitors’ units
• Made from clear, seasoned redwood,
3/4" thick
• Smooth handle securely attached
• Primarily used for leveling and smoothing
concrete prior to final finish
• Also ideal when a slightly rougher concrete
finish is desired
• The 16" float has a beveled front edge
EDI
Part#
UPC#
Size
Box
Case
14801
RL6
035965048019
N/A
1
6
EDI
Rotaleveler Adapter
Hand Tools
Diameter Box Case
• Made of lightweight aluminum
• Threaded ends are welded in place instead of
press-fit so they will not come apart
• Compatible with similar handles made by others
• Warning: When using handle extensions, always
avoid contact with electrical power lines or any
electrical source
®
19
Part#
Aluminum Extension Handle
Fresno Bull Float Bracket Adapter
EDI
• Made of light, yet rigid tubular design
• The large threads can be combined with similar
handles made by others
• Warning: When using handle extensions, always
avoid contact with electrical power lines or any
electrical source
• Used to attach smaller diameter push button handles
to our #RL6 PotaLeveler® bull float bracket
• Has an outside diameter of 1-3/4" to attach to the
RotaLeveler® and a 1-3/8" outside diameter to
attach to the handle
EDI
Part#
UPC#
Size
Box
Case
14809
HA4
035965048095
15"
1
1
6
Part#
UPC#
Size
Box
Case
14502
44
035965045025
12 x 5
4
24
14504
144
035965045049
16 x 3-1/2
6
18
Rub Bricks
•
•
•
•
Fluted silicon carbide stone
Comfortable handle securely attached
20-grit
Ideal for dressing down and removing form
marks from concrete
EDI
19 -98
1
Part#
UPC#
Size
Box
Case
16440
840
035965064408
6x3x1
1
5
16441
841
035965064415
8 x 3-1/2 x 1-1/2
1
5
WWW.HANESSUPPLY.COM
Albany/NE Division:
518.438.0139
Rochester Division:
585.235.0160
FAX:
FAX:
FAX:
716.826.4412
518.438.5343
585.235.0229
CCISCO: 843.238.1338
FAX:
843.238.8337
Hand Tools
MARSHALLTOWN
®
Concrete Brooms
Hand Sander
• Long wearing 2-3/4" black polypropylene bristles
set solidly into a natural lacquered hardwood block
• Threaded hole accepts any standard
broom handle
• Ideal for applying non-slip finish to newly
finished concrete surfaces
•
•
•
•
EDI
16425
Part#
UPC#
Size
Box
Case
848
035965064255
48"
1
6
Rust resistant backer
Bonded foam rubber pad
Smooth contour handle
Exclusive one piece handle clamp design
makes for easy use and holds the sandpaper
firmly in place
• For use with die-cut or a half sheet of
standard sandpaper
• Used for sanding drywall joints
Tie Wire Twister
EDI
16101
• Safety and easily twists wire bar ties
• Hardwood handle
• Rugged design
Part#
UPC#
Size
Box
Case
14731
14731
035965047319
N/A
24
24
DRYWALL / PLASTERING TOOLS
Pro-Style Taping Knives With
Molded - On Handles
Part#
UPC#
Size
Box
Case
903M
905M
907M
913M
035965061360
035965061377
035965061438
035965061445
6 x 3-1/4
8 x 3-1/4
10 x 3-1/4
12 x 3-1/4
6
6
6
6
48
48
48
48
Inside Drywall Corner Trowel
•
•
•
•
Lightweight tool that features a stainless steel blade
Comfortable hardwood handle is securely attached
Blade is angled at 103°
Flexes to 90° to finish both sides of an inside
corner at the same time
• Used to embed tape and smooth out the final
layer of mud to taped corners
Box
2
Case
48
Plastic Mud Pan
Part#
914
UPC#
035965061148
Size
12"
Box
12
Part#
26
UPC#
035965044264
Size
9-3/8 x 3-1/4
Box
2
Case
24
EDI
16468
Part#
DWS467-3
UPC#
035965064675
Size
9 x 4-1/2 x 1-3/4
Box
48
Case
48
Quik-Mix® Mixers
• Blade is securely welded to a 3/8” hex shaft
• Saves time and energy
• Ideal for stirring and blending paint, drywall mud,
and acoustic quickly and lump free
• Fits any 3/8" or larger slow speed drill (500 rpm)
• Blade measures 8-1/2 x 4-1/2
EDI
16371
Part#
819L
UPC#
035965063715
Size
36"
Box
6
Case
6
Jiffler® Mixer, 3-1/2" Wheels
• Plated carbon adjustable steel wheels
• Unique action disperses lumps fast as the
lower wheel cuts upward and the upper wheel
downward to create counter flow
• Has a plated steel 3/8 x 16 shaft that has been
miled for a 1/4" or larger chuck on portable or
stationary power of at least 1000 rpm
EDI
16336
Part#
893
UPC#
035965163361
Size
3-1/2"
Box
1
19
Hand Tools
• Made of durable plastic
• Tapered ends and sides
• Features a metal scraping bar
• Resists chemicals and temperature changes
• Used for carrying joint compound
EDI
16114
Case
24
• Abrasive side for wet sanding; sponge side for
removing residue
• Recommended by compound manufacturers
• Virtually dustless drywall sanding
• Cleans easily, reusable
16136
16137
16143
16144
Size
4x5
Box
2
Drywall Sanding Sponge
EDI
UPC#
035965045407
Size
9-1/2 x 3-1/4
• Made of reinforced die-cast aluminum bonded to
a foam rubber pad
• Fast, positive clamps lock securely to hold
the sandpaper in place
• Used for sanding drywall joints
• Combining this sander with our #28 or #28L
pole sander handle permits sanding
anywhere
EDI
14426
• Flexible blue spring steel blade
• Tapered blade lets you get close to the
corner without scraping the wall
• The most lightweight yet durable taping
knives on the market
• Equipped with a very lightweight yet durable
contour handle that gives a rugged feel
• Plastic handle is securely molded to an
aluminum backing plate
Part#
CT750
UPC#
035965061018
Swivel Pole Sander
EDI
EDI
14540
Part#
HS901
Case
18
Case
12
WWW.HANESSUPPLY.COM
19 -99
Albany/NE Division:
518.438.0139
Rochester Division:
585.235.0160
FAX:
FAX:
FAX:
716.826.4412
518.438.5343
585.235.0229
CCISCO: 843.238.1338
FAX:
843.238.8337
Hand Tools
MARSHALLTOWN®
Aluminum Hawk
TapeshooterTM Drywall Tapers
• Made of heavy gauge hard-rolled aluminum
• Lightweight but durable
• Edges have been smoothed and the corners
rounded for convenience
• 3 5/8" flange with extended hub that is threaded
for the handle
• Wood handle and sponge callus preventer
included
• Made from lightweight aluminum
• One-handed mud loading
• Precision mud flow control is easy to adjust
• Latched door on tape spool holder
• Adjustable web side handle with thumb rest
• Serrated cut-off blade
• Comfortable DuraSoft® handle
• Available as right-handed or left-handed
EDI
14659
Part#
AH659
UPC#
035965046596
Size
13 x 13
Box
6
Case
24
EDI
Part#
UPC#
Size
16375
798D
035965063753 Right-Handed
16376
799D
035965063760 Left-Handed
Replacement Blades
16457
RB798
035965064576 Right-Handed
Callus Preventer
• Made of sponge rubber
• Can be used with any of our hawks
EDI
19102
Part#
0
UPC#
035965091022
Size
N/A
16458
Box
1
Case
12
Permashape Premium Stainless Steel
Plastering Trowels
• Guaranteed to stay flat use after use
• Made from highest grade stainless steel
• Properly shaped & tempered
• Withstands pressure of hard-troweling
• Flat blade makes applications easier with more consistent finish
• Available with either comfortable wood handle or DuraSoft® handle
• “D” indicates DuraSoft® handle; provides soft feel, reduces fatigue
• U.S. patent Nos. 5,522,111; 5,713,096 and 5,791,009
Part#
1SSFPD
4SSFPD
13SSFPD
UPC#
035965021807
035965021821
035965021845
Size
11 x 4-1/2
11-1/2 x 4-3/4
13 x 5
Box
1
1
1
Case
12
12
12
Finishing Trowels
EDI
13807
Part#
FT368
UPC#
035965038072
Size
12 x 5
Box
4
Case
12
Hand Tools
• Red rubber pad is durable and lightweight
• Has a stiff aluminum backing plate bonded to the pad
• Measures 9 x 4 and is 5/8" thick
• Pads are available with either a fine or coarse cell
• The ideal float for bringing sand to the
surface
• Used by both the concrete finisher and
plasterer
EDI
14557
14558
Part#
RF767
RF768
19 -100
UPC#
035965045575
035965045582
Size
9 x 4-FINE
9 x 4-COARSE
1
1
1
Made of steel and plated to prevent rust
Holds all standard tape rolls up to 500 feet
Hangs on belt for easy dispensing
Quick opening design makes changing
tape easy
• A great time saver
EDI
14664
Part#
TR664
UPC#
035965046640
Size
10-1/4 x 3
Box
6
Case
60
Drywall Board Lifter
• Has a non-slip checkered surface to provide foot traction for user’s safety
• Stirrup design makes for convenient carry handle
• Self-righting feature makes it ready for
use without fumbling to turn it over
• Designed for easy use, the tapered front
end slides easily under the board; then it
lifts and holds it in place while nailing
Part#
790
UPC#
035965053303
Size
12 X 5-1/4
Box
2
Case
2
Drywall Utility Saw
Rubber Floats
19
1
Left-Handed
•
•
•
•
EDI
15330
• Cast aluminum mounting securely riveted
to tempered, polished steel blade
• Mounting has a square shank to prevent
handle from turning
• Curved handle gives extra knuckle room
035965064583
Case
1
1
Drywall Tape Reel
®
EDI
12180
12182
12184
RB799
Box
1
1
Box Case
1
24
1
24
• Rugged steel blade with eight teeth per inch
• Sharp point can penetrate wallboard
without drilling
• Cuts wallboard, masonite, plywood and wood
• Contoured hardwood handle with steel
ferrule securely attached
EDI
16120
Part#
US920
UPC#
035965161206
Size
6
Box
12
Case
12
Box
6
Case
60
Drywall Circle Cutter
• Hardened cutter wheel and center pin will
remain sharp indefinitely
• Cuts sharp clean circles of up to 16" in
diameter with only one hand
• Measure accurately on the calibrated
steel shaft
EDI
14556
Part#
CC766
UPC#
035965145565
WWW.HANESSUPPLY.COM
Size
8-1/2"
Albany/NE Division:
518.438.0139
Rochester Division:
585.235.0160
FAX:
FAX:
FAX:
716.826.4412
518.438.5343
585.235.0229
CCISCO: 843.238.1338
FAX:
843.238.8337
Hand Tools
MARSHALLTOWN
®
T-Square
KNEE PADS
• Silver anodized finish with black epoxy paint
numerals for long wear and legibility
• reverse ruled to read from either edge
• head is notched to permit full length cut
• Stud location marks aid in nailing
EDI
16118
Part#
TS917
UPC#
035965061186
Size
47-7/8 x 22
Box
2
Rubber Knee Pads
•
•
•
•
•
Case
20
EDI
16412
16411
Scratcher Trowel
•
•
•
•
Blade made of the highest grade spring steel
Aluminum alloy mounting fitted with a curved handle
Blade is 1/2" “V” notched on three sides
Used for scoring plaster to form a good
bond between coats
EDI
15742
Part#
715S
UPC#
035965057424
Size
12 x 4-1/2
Box
4
UPC#
035965063562
Case
24
Size
Hopper Gun-Complete
Skywalker StiltsTM
•
•
•
•
Heavy gauge overlapping aluminum legs tubes
Padded calf brace
Dual spring action
Adjustable metal buckle straps and adjustable heel
plates already attached
• 225 lb. load limit
EDI
16408
16409
Part#
SW18
SW24
UPC#
035965064088
035965064095
Size
Adj. 18" - 30"
Adj. 24" - 40"
Box Case
1
1
1
1
UPC#
035965064125
035965164115
Size
Knee Pads
Replacement Straps
Box
1
1pr
Case
20
1pr
• Tough construction to stand up under
hard wear
• Neolite pads are felt lined and shaped
to fit your knee
• One leather strap holds them in place
• Strap will not slip or bind
• Sold in pairs
• Plastic hopper and specially formulated nylon gun
• Seven orifice sizes with tubular design for reduced
overspray and greater texture variety
• Tight sealing flow shutoff prevents leakage
• Knurled knob allows for easy adjustment of
orifice plate
• Angled hopper allows user to spray ceilings
and walls with hopper gun in upright position
• Gun features a handy air control valve which allows
flow control at the gun instead of at the pump
• Easy pull swing trigger for greater control and
less fatigue
• Adjustable trigger stop for consistency of
pattern
• Hopper with seamless corner design eliminates
material build-up and reduces clogging
Part#
693
Part#
823
16411
Neolite Knee Pads
Sharpshooter ITM Hopper Gun
EDI
16356
Made from comfortable foam rubber
Single web strap holds them in place
Strap will not slip or bind
Sold in pairs
Made in the U.S.A.
EDI
16410
Part#
821
UPC#
035965164108
Size
N/A
Box
1
Case
20
Knee-EZ Pads
• Molded rubber outer shell with a comfortable,
soft rubber insert
• Adjustable strap embedded within the pad
that will not slip or bind
• Prevent moisture from penetrating the
user’s clothes
• Sold in pairs
EDI
16414
Box
1
Case
1
Part#
862
UPC#
035965064149
Size
N/A
Box
1
Case
12
Nylon Fitted Knee Pads
• Made of cordura nylon fabric with a hard plastic cap
• Contour fitted
• Offer better weight distribution
• Have a full 1/2" foam cushion
• Water and abrasion resistant
• Adjustable Velcro® closure
• Sold in pairs
EDI
16446
Part#
KP46
UPC#
035965164467
Size
N/A
Box
1
Case
12
SurefootTM Folding Work Bench
19
EDI
16444
Part#
WB444
UPC#
035695064446
Size
48 x 8
Box
1
Hand Tools
• Adjustable from 18" to 30"
• “Finger-safe,” no pinch height adjustment
• Work deck surface is 48" in length
• 400 lb. capacity
• Made of durable, high strength, tempered
aluminum
• Best stability at any height
• Simple, reliable leg locks
Case
1
WWW.HANESSUPPLY.COM
19 -101
Albany/NE Division:
518.438.0139
Rochester Division:
585.235.0160
FAX:
FAX:
FAX:
716.826.4412
518.438.5343
585.235.0229
CCISCO: 843.238.1338
FAX:
843.238.8337
Hand Tools
Mayhew Tools
Line-Up Punch
Mayhew Tools
For aligning holes in metal pieces through which rivets, pins or bolts are
inserted. Do not use for driving.
CHISELS
Full Finish
Cold Chisels
For cutting, shaping and removing metal softer than the cutting edge of the
chisel.
Economy Finish
EDP
No.
70200
70201
70202
70204
70205
70209
70212
70216
70220
70223
A
B
C
Cuts Body Size Overall
Wt.
(in)
(in)
Lgth. (in) (lbs)
1/4
1/4
5
.070
5/16
1/4
5
.070
3/8
5/16
5-1/2
.128
7/16
3/8
6
.198
1/2
7/16
6
.246
5/8
1/2
6-1/2
.370
3/4
5/8
7
.602
7/8
3/4
7-1/2
.900
1
7/8
8
1.250
1-1/8
7/8
8
1.332
Tool
No.
70
70
70
70
70
70
70
70
70
70
A
B
C
Cuts Body Size Overall
(in)
(in)
Lgth. (in)
1/2
7/16
12
5/8
1/2
12
3/4
5/8
12
7/8
3/4
12
7/8
3/4
18
1
3/4
12
For driving out and removing already loosened pins and keys after initial
movement by a solid punch.
Full Finish
Wt.
(lbs)
.528
.694
1.094
1.514
2.358
1.534
PUNCHES
Center Punches
For piercing or marking for starting drills in metal and other materials.
Economy Finish
EDP
No.
74000
74001
74002
74003
74004
Tool
No.
415
415
415
416
416
A
B
Cuts Body Size
(in)
(in)
1/4
3/32
5/16
5/32
3/8
3/16
1/2
5/16
5/8
3/8
C
Overall
Wt.
Lgth. (in) (lbs)
4
.044
4-1/2
.090
5
.152
6
.335
6-1/4
.502
EDP Tool
No.
No.
21500 443
21506 443
21501 443
21505 443
21502 443
21503 443
21504 443
For scribing lines into metal before cutting or riveting.
Full Finish
B
C
Tool Body Size Overall
No.
(in)
Lgth. (in)
410
1/4
4
410
5/16
4-1/2
410
3/8
5
402
1/2
6
A
B
D
C
EDP Tool
Point Body Size
Taper
Overall
Wt.
No.
No. Size (in)
(in)
Lgth. (in) Lgth. (in) (lbs)
21000 413
1/16
1/4
3/4
4
.045
21001 413
3/32
5/16
7/8
4-1/2
.090
21002 413
1/8
5/16
1
4-3/4
.090
21003 413
5/32
5/16
1
5
.096
21004 413
3/16
3/8
1-1/4
5-1/4
.155
21011 413
7/32
3/8
1-1/4
5-1/2
.152
21005 413
1/4
3/8
1-1/4
5-3/4
.168
21019 413
5/16
7/16
1-1/4
6
.244
21100 414
3/16
1/2
1-1/4
6
.272
21103 414
1/4
1/2
1-1/4
6
.284
21104 414
5/16
1/2
1-1/4
6
.341
21105 414
3/8
1/2
1-1/4
6
.349
21302 418
3/8
5/8
2-1/4
8
.600
21400 419
7/16
3/4
2-1/4
10
1.066
21401 419
1/2
3/4
2-1/4
10
1.086
Extra Long
Full Finish
Prick Punches
EDP
No.
23000
23001
23002
23003
Wt.
(lbs)
.044
.090
.146
.284
A
B
D
C
Point Body Size
Taper
Overall
Size (in)
(in)
Lgth. (in) Lgth. (in)
1/8
5/16
3-1/2
8
5/32
5/16
3-1/2
8
3/16
3/8
3-1/2
8
7/32
3/8
3-1/2
8
1/4
3/8
3-1/2
8
5/16
7/16
3-1/2
8
3/8
1/2
3-1/2
8
Nail Sets – 435 series
Drive nails to surface level or below
without denting the wood.
Solid Punches
For loosening frozen or tight pins and keys or knocking out rivets.
Hand Tools
19
Full Finish
EDP
No.
20004
20000
20001
20005
20002
20003
20103
20104
20105
20301
20302
Tool
No.
400
400
400
400
400
400
401
401
401
407
407
19 -102
Wt.
(lbs)
.130
.148
.348
.230
.438
.448
.822
1.504
.848
1.716
2.874
.329
.644
1.164
Pin Punches
Extra Long
Economy Finish
EDP Tool
No.
No.
70207 110
70210 110
70213 110
70217 110
70219 110
70221 110
A
B
D
C
EDP Tool
Point Body Size
Taper
Overall
No.
No. Size (in)
(in)
22021 466
3/32
5/16
3-1/2
8
22010 466
1/8
5/16
3-1/2
8
22000 453
5/32
1/2
4-1/2
8
22011 466
5/32
3/8
4-1/2
9
22012 467
3/16
1/2
5
10
22025 467
7/32
1/2
5
10
22003 458
1/4
5/8
7-1/4
12
22005 460
1/4
3/4
7-1/4
15
22013 458
5/16
5/8
7-1/4
12
22017 460
3/8
3/4
8
15
22024 464
1/2
7/8
7-1/2
18
22006 461
3/16
3/8
6
12
22007 462
1/4
1/2
7-1/2
14
22008 463
5/16
5/8
9
16
A
B
D
C
Point
Body Size
Taper
Overall
Size (in)
(in)
1/16
3/8
1-1/2
5
3/32
3/8
1-1/2
5
1/8
3/8
1-1/2
5
5/32
3/8
1-1/2
5
3/16
3/8
1-1/2
5
1/4
3/8
1-1/2
5
3/16
1/2
2
6
1/4
1/2
2
6
5/16
1/2
2
6
3/8
5/8
2-1/4
6-1/2
1/2
5/8
2-1/4
7
Wt.
(lbs)
.146
.146
.146
.152
.152
.154
.296
.300
.332
.540
.630
A
B
EDP
Point Sq. Head Overall
No. Size (in) Size (in) Lgth. (in)
26000 1/32
11/32
4
26001 2/32
11/32
4
26002 3/32
11/32
4
26003 4/32
11/32
4
26004 5/32
11/32
4
WWW.HANESSUPPLY.COM
C
Wt.
(lbs)
.074
.074
.075
.075
.076
Wt.
(lbs)
.118
.119
.162
.176
.190
.280
.376
Albany/NE Division:
518.438.0139
Rochester Division:
585.235.0160
FAX:
FAX:
FAX:
716.826.4412
518.438.5343
585.235.0229
CCISCO: 843.238.1338
FAX:
843.238.8337
Hand Tools
Mayhew Tools
MASONRY TOOLS
Brick Set – Economy Finish
HAND GUARDED
THERE’S A STRIKING DIFFERENCE
IN HAND TOOLS FROM MAYHEW TOOLS!
• Protects against misplaced hammer blows
• Absorbs the shock of the hammer blows
• Ergonomically designed to give a more comfortable and secure grip.
For scoring and trimming concrete blocks
and masonry bricks.
EDP
No.
12300
12301
12302
A
B
C
Tool Cut Body Size Overall
Wt.
No. (in)
(in)
Lgth. (in) (lbs)
780
3
7/8
7-3/4
1.324
781 3-1/2
1
7-1/2
1.696
782
4
1
7-1/2
1.662
EDP
No.
85220
85213
85217
85304
85221
85212
85216
85770
85772
85777
85780
85781
85782
85790
85869
85090
85092
85925
85949
85950
85951
85999
Mason’s Chisels – ECONOMY FINISH
For cutting, scoring and shaping cement,
cinder blocks, brick and stone.
EDP
No.
30200
30201
30202
Tool
No.
770
771
772
A
B
C
Cut Body Size Overall
Wt.
(in)
(in)
Lgth. (in) (lbs)
1-3/4
5/8
7-1/2
.662
1-1/4
3/4
7-1/2
1.000
2-1/4
5/8
7-1/2
.700
Floor Chisels – ECONOMY FINISH
Thin cutting blade for rough cutting and trimming of
wood and for prying tongue and grooves together.
EDP
No.
12309
12310
12311
Tool
No.
949
950
951
A
B
C
Cut Body Size Overall
Wt.
(in)
(in)
Lgth. (in) (lbs)
2
5/8
10
.890
2-1/2
5/8
10-1/2
.918
3
3/4
11
1.380
For prying and lifting.
• The entire length of the blade is heat-treated.
• The cellulose acetate handle is ergonomically designed to provide a
more comfortable and secure grip.
• Curved blade style
gives extra leverage.
B
C
Body
Overall
Size (in) Lgth. (in)
1/4
8
3/8
13
3/8
17
1/2
25
1/2
31
3/8
12
3/8
17
1/8
25
1/2
31
5/8
36
Tool
Overall Lth. (in)/
No.
Blade Style
8-C 3-3/4" Curved Blade
8-S
8" Straight Blade
12-S 12" Straight Blade
7-C
7" Curved Blade
12-C
12" Curved Blade
18-C
18" Curved Blade
24-C
24" Curved Blade
36-C
36" Curved Blade
Set
Inch
Metric
EDP No.
66000
66004
Kit No.
330US
330CM
Wt. (lbs)
2.47
2.47
27 Pc. Hollow Punch Tool Kit
Set
Inch
Metric
EDP No. Kit No.
66002
350US
66006
250CM
Wt. (lbs)
6.06
6.06
25 Punch sizes: 1/8", 3/16", 1/4", 5/16", 3/8", 7/16",
1/2", 9/16", 5/8", 3/4", 7/8", 1", 1-1/16", 1-1/8", 1-3/16",
1-1/4", 1-5/16", 1-3/8", 1-7/16", 1-1/2", 1-5/8",
1-11/16", 1-3/4", 1-7/8", 2" with mandrin and handle
29 Punch sizes: 2mm, 3mm, 4mm, 5mm, 6mm,
7mm, 8mm, 9mm, 10mm, 12mm, 14mm, 16mm,
18mm, 20mm, 22mm, 24mm, 26mm, 28mm, 30mm,
32mm, 34mm, 36mm, 38mm, 40mm, 42mm, 44mm,
46mm, 48mm, 50mm with mandrin and handle
C
Overall
Wt.
Lgth. (in) (lbs)
12
.462
16
1.052
21
1.990
19
Hand Tools
B
Body
Size (in)
7/16 Rnd.
9/16 Rnd.
11/16 Rnd.
16 Pc. Hollow Punch Tool Kit
15 Punch sizes: 3mm, 4mm, 6mm, 8mm, 10mm,
12mm, 14mm, 16mm, 18mm, 20mm, 22mm, 24mm,
26mm, 28mm, 30mm with handle
The curved end ensures better leverage
in small areas; other end
for aligning work.
Tool
No.
424
426
428
For cutting out washers and sealing rings in a multitude of different
materials including foam, cardboard, leather, rubber fiber, plastic,
gasket material and lead.
15 Punch sizes: 1/8", 3/16", 1/4", 5/16", 3/8",
7/16", 1/2" 9/16", 5/8", 3/4", 7/8" 1", 1-1/16", 1-1/8",
1-3/16" with handle
Wt.
(lbs)
0.25
0.40
0.53
1.50
2.00
0.33
0.53
1.50
2.00
3.50
Ladyfoot Pry Bars
EDP
No.
40150
40152
40154
Wt.
(lbs)
1.82
1.38
2.00
0.81
1.58
0.88
1.19
0.94
1.24
1.24
1.93
1.93
1.97
1.24
1.21
2.04
2.19
1.27
1.50
1.57
1.63
0.27
HOLLOW PUNCHES
BARS
Pry Bars (Screwdriver Type)
EDP
No.
40135
40105
40106
40108
40113
40110
40111
40112
40109
40123
Tool Pt./Cut Overall
No.
(in) Lgth. (in)
Description
110
1
12
Cold Chisel w/guard
110
3/4
12
Cold Chisel w/guard
110
7/8
12
Cold Chisel w/guard
407
3/8
12
Solid Punch w/guard
50
1
8
Cold Chisel w/guard
70
3/4
7
Cold Chisel w/guard
70
7/8
7-1/2
Cold Chisel w/guard
770 1-3/4
7-1/2
Mason Chisel w/guard
772 2-1/4
7-1/2
Mason Chisel w/guard
777 2-1/4
7-1/2
Tooth Chisel w/guard
780
3
7-3/4
Brick Set w/guard
781 3-1/2
7-1/2
Brick Set w/guard
782
4
7-1/2
Brick Set w/guard
790 1-1/8
12
Flat Utility Chisel w/guard
869
3/16
10-1/2 Plugging Chisel w/guard
90
3/4
12
Bull Point Chisel w/guard
92
7/8
12
Bull Point Chisel w/guard
925 2-3/4
8
Electrician’s Chisel w/guard
949
2
10
Floor Chisel w/guard
950 2-1/2
10-1/2
951
3
11
Handguarded (GUARD ONLY)
(Fits on tools with a diameter of 5/8" to 3/4")
Carbon Scrapers
For a variety of multi-purpose automotive scraping applications.
EDP
No.
11110
11111
11112
Tool
No.
850
851
852
A
Cut
(in)
3/4
1
1-1/2
B
Sq. Shank
(in)
5/16
5/16
5/16
E
Overall
Lgth. (in)
11-7/8
11-7/8
11-7/8
Wt.
(lbs)
.380
.400
.450
WWW.HANESSUPPLY.COM
19 -103
Albany/NE Division:
518.438.0139
Rochester Division:
585.235.0160
FAX:
FAX:
FAX:
716.826.4412
518.438.5343
585.235.0229
CCISCO: 843.238.1338
FAX:
843.238.8337
Hand Tools
Mayhew Tools
5 Pc. Pin Punch Kit
KITS
6 Pc. Punch and Chisel Kit
Finish
Economy
EDP No.
76005
Kit No.
751-K
Wt. (lbs)
1.25
Tool
Description
Pin Punch
Tool Pt./Cut Body Size Taper/Pin Overall
No.
(in)
(in)
413
1/8
5/16
1
4-3/4
413
3/16
3/8
1-1/4
5-1/4
Center Punch 415
3/16
3/8
—
5
Solid Punch 400
3/16
3/8
1-1/4
5
Cold Chisel
70
1/2
7/16
—
6
70
5/8
1/2
—
6-1/2
8 Pc. Punch and Chisel Kit
Finish
Economy
EDP No.
61025
Kit No.
754-K
Wt.(lbs)
1.53
Tool
Description
Pin Punch
Tool Pt./Cut Body Size Taper/Pin Overall
No. (in)
(in)
413
1/8
5/16
1
4-3/4
413 3/16
3/8
1-1/4
5-1/4
413
1/4
3/8
1-1/4
5-3/4
Center Punch 415 3/16
3/8
—
5
Solid Punch 400 3/16
3/8
1-1/4
5
Cold Chisel
70
3/8
5/16
—
5-1/2
70
5/8
1/2
—
6-1/2
70
1/2
7/16
—
6
14 Pc. Punch
and Chisel Kit
Finish
Full
Economy
EDP No.
61044
76044
Tool
Description
Center Punch
Solid Punch
Tool
No.
415
400
400
Pin Punch
413
413
413
413
413
Line-Up Punch 466
Cold Chisel
70
70
70
70
70
Kit No. Wt. (lbs)
7014-K
2.85
7014-K
2.85
Pt./Cut
(in)
3/8
1/8
3/16
3/32
1/8
5/32
3/16
1/4
1/8
1/4
3/8
1/2
5/8
3/4
Body Size
(in)
3/8
3/8
3/8
5/16
5/16
5/16
3/8
3/8
5/16
1/4
5/16
7/16
1/2
5/8
Taper/Pin Overall
—
5
1-1/2
5
1-1/2
5
7/8
4-1/2
1
4-3/4
1
5
1-1/4
5-1/4
1-1/4
5-3/4
3-1/2
8
—
5
—
5-1/2
—
6
—
6-1/2
—
7
EDP
No.
62056
Finish
Full Finish
Tool
Tool
Description No.
Pin Punch 413
413
413
413
413
Kit
No.
704-K
Wt.
(lbs)
0.79
Pt.
Body
Pin Lgth.
(in) Size (in)
(in)
1/8
5/16
1
5/32
5/16
1
3/16
3/8
1-1/4
1/4
3/8
1-1/4
5/16
7/16
1-1/4
Overall
Lgth. (in)
4-3/4
5
5-1/4
5-3/4
6
5 Pc. Extra Long Pin Punch Kit
Finish
Full Finish
Economy Finish
EDP
No.
62065
76065
Tool
Tool
Desc.
No.
Pin Punch 443
443
443
443
443
Pt.
(in)
1/8
3/16
1/4
5/16
3/8
Kit
No.
446-K
446-K
Wt.
(lbs)
1.23
1.23
Body
Pin
Overall
Size (in) Lgth. (in) Lgth. (in)
5/16
3-1/2
8
3/8
3-1/2
8
3/8
3-1/2
8
7/16
3-1/2
8
1/2
3-1/2
8
6 Pc. Solid Punch Kit
EDP
No.
61340
Finish
Full Finish
Tool
Tool
Desc.
No.
Solid Punch 400
400
400
400
400
401
Kit
No.
4006-K
Wt.
(lbs)
1.16
Pt.
Body
Taper
Overall
(in) Size (in) Lgth. (in) Lgth. (in)
3/32
3/8
1-1/2
5
1/8
3/8
1-1/2
5
5/32
3/8
1-1/4
5
3/16
3/8
1-1/4
5
1/4
3/8
1-1/4
5
5/16
1/2
2
6
6 Pc. Punch Kit
Finish
Full Finish
Economy Finish
Tool
Desc.
Center Punch
Prick Punch
Solid Punch
Pin Punch
EDP
No.
62030
76030
Tool
No.
415
410
400
400
413
413
Kit
No.
4106-K
4106-K
Pt.
Body
(in) Size (in)
5/32
5/16
—
3/8
1/8
3/8
3/16
3/8
3/16
3/8
1/4
3/8
Wt.
(lbs)
0.93
0.93
Taper/Pin
Lgth. (in)
—
—
1-1/2
1-1/4
1-1/4
1-1/4
Overall
Lgth. (in)
4-1/2
5
5
5
5-1/4
5-3/4
6 Pc. Cold Chisel Kit
EDP
No.
60560
76560
Finish
Full Finish
Economy Finish
Tool
Description
Cold Chisel
Hand Tools
19
Tool
No.
70
70
70
70
70
70
Cut
(in)
1/4
5/16
3/8
1/2
5/8
3/4
Kit.
No.
7001-K
7001-K
Body
Size (in)
1/4
1/4
5/16
7/16
1/2
5/8
Wt.
(lbs)
1.56
1.56
Overall
Lgth. (in)
5
5
5-1/2
6
6-1/2
7
6 Pc. Pilot Punch Kit
Finish
Economy Finish
EDP
No.
62250
Kit
No.
106-K
Wt.
(lbs)
0.60
Tool
Tool
Desc.
No.
Pilot Punch 112
112
112
112
112
112
Pt. AKA
Body Pin Lgth. Overall
(in)
# Size (in)
(in)
Lgth. (in)
1/8
4
1/4
2
4
5/32 5
1/4
2-1/2
4-1/2
3/16 6
3/8
2-1/2
4-1/2
7/32 7
3/8
3
5
1/4
8
7/16
3-1/2
5-1/2
5/16 9
7/16
4
6
5 Pc. Punch Kit
Finish
Full Finish
Tool
Description
Solid Punch
Pin Punch
19 -104
EDP
No.
62020
Tool
No.
400
413
413
413
413
Kit
No.
4105-K
Wt.
(lbs)
0.70
Pt.
Body
Taper/Pin Overall
(in) Size (in) Lgth. (in) Lgt. (in)
3/16
3/8
1-1/4
5
1/8
5/16
1
4-3/4
5/32
5/16
1
5
3/16
3/8
1-1/4
5-1/4
1/4
3/8
1-1/4
5-3/4
3 Pc. Pry Bar (Screwdriver Type) Set
EDP
No.
61350
Wt.
(lbs)
3.65
Tool
Tool
Blade
Overall
Description
No. Lth./Type Lgth. (in)
Pry Bar (Screwdriver Type) 7-C
7" Curved
12
Pry Bar (Screwdriver Type) 12-C 12" Curved
17
Pry Bar (Screwdriver Type) 18-C 18" Curved 25-1/4
WWW.HANESSUPPLY.COM
Albany/NE Division:
518.438.0139
Rochester Division:
585.235.0160
FAX:
FAX:
FAX:
716.826.4412
518.438.5343
585.235.0229
CCISCO: 843.238.1338
FAX:
843.238.8337
Hand Tools
Morse Starrett /James Morton
Legendary Bessey Heat Treated Steel,
Sliding Arm Clamps (continued)
Morse Starrett
Impact Type Wire Rope Cutters
Nominal
Opening
(in)
Nominal
Throat
Depth
(in)
Nominal
Clamping
Pressure
(lbs)
Nominal
Rail
Size
(in)
Approx.
Wt.
(lbs)
MO-ST® Models 1, 1A & 2
Cat.
No.
The impact type wire rope cutters are the original portable tools invented
by Morse-Starrett to cut wire rope. The cutters are actuated by striking with
a hammer, they are easy to operate and do a superior cutting job with only
a few blows of a hammer. These cutters are
precision engineered to deliver a cut without
affecting the original roundness of the wire
rope. The blades and dies are made of the
finest tool steel available, heat treated
and ground to close tolerances.
1800 Series Medium Duty Clamps - with Morpad
1800S-8
8
4-3/4
1800
1-1/16 x 1/2
1800S-12
12
4-3/4
1800
1-1/16 x 1/2
2400 Series Regular Duty Clamps - with Morpad
2400S-6
6
5-1/2
2660
1-3/16 x 9/16
2400S-8
8
5-1/2
2660
1-3/16 x 9/16
2400S-10
10
5-1/2
2660
1-3/16 x 9/16
2400S-12
12
5-1/2
2660
1-3/16 x 9/16
2400S-20
20
5-1/2
2660
1-3/16 x 9/16
2400S-40
40
5-1/2
2660
1-3/16 x 9/16
2400S-60
60
5-1/2
2660
1-3/16 x 9/16
4800 Series Heavy Duty Clamps - with Morpad
4800S-12
12
7
4880
1-9/16 x 3/4
4800S-20
20
7
4880
1-9/16 x 3/4
4800S-40
40
7
4880
1-9/16 x 3/4
4800S-48
48
7
4880
1-9/16 x 3/4
4800S-60
60
7
4880
1-9/16 x 3/4
7200 Series Extra Heavy Duty Clamps - with Morpad
7200S-12
12
8
7770
1-15/16 x 1
7200S-20
20
8
7770
1-15/16 x 1
7200S-40
40
8
7770
1-15/16 x 1
Model
No.
Description
1
Light Duty
1A
Heavy Duty
2
Extra Heavy Duty
Cap.
Wt.
(in)
(lbs)
3/4
8
1-1/16 17
1-1/2
28
Manually Operated
Hydraulic Wire Rope
Cutters
4.00
4.75
5.00
5.50
5.75
6.80
7.50
10.75
14.25
12.00
14.50
20.00
22.00
28.00
24.00
28.00
38.00
Hydrashear® Models W, P & C
SQ and STB All-Steel Industrial Clamps
The self-contained hydraulic cable cutter
is a precision engineered tool designed to
give a clean cut with minimum effort. Just pump the handle... no outside
power is required. This self-contained portable tool can be easily carried
and is used by contractors, rigging lofts and elevator repairmen. All three
models will operate underwater. The Pell Hydrashear® is recommended
by wire rope manufacturers and used by industries throughout the world.
The blades and die sets are made of the finest tool steel available, heat
treated and ground to close tolerances. This means a long life for the
blades as well as superior performance. The hydraulic cutters are available
in three sizes and capacities. The Model W has a 3/4" capacity, the Model
P, a 1-1/8" capacity and the Model C has a 1-3/4" capacity.
SQ Series / “Super Quick” Clamps
• Deep throat has greater reach... eliminates the need for regular AND
deep throat C-clamp
• Manufactured to Bessey’s high quality standards…with an economical
standard pad
STB Series / “Super Tough” Clamps
• Hex head spindle
• Manufactured to Bessey’s high quality standards... with an economical
standard pad
Cat.
No.
James Morton
SLIDING ARM CLAMPS
Legendary Bessey Heat Treated Steel,
Sliding Arm Clamps
These clamps offer a greater reach to eliminate the need to buy both
regular AND deep throat clamps.
Bessey Heat Treated Steel, Sliding Arm Clamps feature the Patented
Morpad - the replaceable pad that tilts to 35°
1800 Series/Medium Duty Clamps
SQ Series/“Super Quick” Clamps
SQ-4
4-3/4
6
1330
SQ-8
4-3/4
8
2660
SQ-10
4-3/4
10
2660
SQ-12
5-1/2
12
2660
SQ-20
4-3/4
20
2660
STB Series/“Super Tough” Clamps
STB30
12
7
4880
STB50
20
7
4880
STB100
40
7
4880
Nominal
Clamping
Pressure
(in)
Approx.
Wt.
(lbs)
27/32 x 13/32
1-3/16 x 9/16
1-3/16 x 9/16
1-3/16 x 9/16
1-3/16 x 9/16
2.50
5.50
6.00
7.30
8.50
1-9/16 x 3/4
1-9/16 x 3/4
1-9/16 x 3/4
12.00
14.50
20.00
Light Pressure to Medium Duty, Sliding
Arm Clamps
300 & 500 Series:
• Seven sizes - from 6" to 60" openings
• 2660 lb. nominal clamping pressure
• 4" capacity, up to 330 lbs. clamping pressure; 6", 8" and 12" capacities
up to 1200 lbs. clamping pressure; wood handle; standard pad.
4800 Series/Heavy Duty Clamps
2400S-8
1200 Series:
• 8" and 12" capacities; up to 1200 lbs. clamping pressure; standard pad;
tommy bar handle.
Light Duty GZK Series:
• 6" - 50" capacities, up to 1660 lbs. clamping pressure; standard pad;
tommy bar handle.
Medium Duty SGL Series:
• 8" - 24" capacity, up to 1800 lbs. clamping pressure; standard pad;
tommy bar handle.
– continues –
– continues –
WWW.HANESSUPPLY.COM
19 -105
19
Hand Tools
• For uses such as clamping 1" plate
• Safety wedge provides additional locking pressure
on sliding arm
• Three sizes – from 12" to 40" openings
Nominal
Rail
Size
(lbs)
• 4" - 20" capacities, up to 450 lbs. clamping pressure; wood handle;
standard pad.
2400 Series/Regular Duty Clamps
7200 Series/Extra Heavy Duty Clamps
Nominal
Opening
(in)
Light Pressure GZ Series:
• Two sizes - 8" and 12" openings
• For uses such as clamping 3/4" plate
• Five sizes – from 12" to 60" openings
Nominal
Throat
Depth
(in)
Albany/NE Division:
518.438.0139
Rochester Division:
585.235.0160
FAX:
FAX:
FAX:
716.826.4412
518.438.5343
585.235.0229
CCISCO: 843.238.1338
FAX:
843.238.8337
Hand Tools
James Morton
Light Pressure to Medium Duty, Sliding Arm Clamps (continued)
Nominal
Throat Nominal
Depth
Opening
(in)
(in)
Cat.
No.
Light Pressure Series
G10Z
2
G15B5Z
2
G20B5Z
2
G30B5Z
2
G12Z
2-1/2
G40B6Z
2-1/2
G50B6Z
2-1/2
300 & 500 Series
300S-4
2
500S-6
3
500S-8
4
500S-12
5-1/2
1200 Series
1200S-8
5-1/2
1200S-12
5-1/2
Light Duty Series
G16ZK
3-1/4
G20ZK
4
G30ZK
5-1/2
G40ZK
4-3/4
G50ZK
4-3/4
G60ZK
4-3/4
G80ZK
4-3/4
G100ZK
4-3/4
G125ZK
4-3/4
Medium Duty Series
SGL20
4-3/4
SGL25
4-3/4
SGL30
4-3/4
SGL40
4-3/4
SGL50
4-3/4
SGL60
4-3/4
Nominal
Rail
Size
(in)
Nominal
Clamping Approx.
Pressure
Wt.
(lbs)
(lbs)
4
6
8
12
5
16
20
7/16 x 7/32
7/16 x 7/32
7/16 x 7/32
7/16 x 7/32
17/32 x 1/4
17/32 x 1/4
17/32 x 1/4
330
330
330
330
450
450
450
0.50
0.50
0.50
0.50
0.75
0.75
1.00
4
6
8
12
7/16 x 7/32
5/8 x 9/32
3/4 x 3/8
1 x 15/32
330
550
660
1200
0.50
1.20
2.00
4.00
8
12
1 x 15/32
1 x 15/32
1200
1200
3.75
4.25
6
8
12
16
20
24
31
40
50
5/8 x 9/32
3/4 x 3/8
1 x 15/32
1 x 15/32
1 x 15/32
1 x 15/32
1 x 15/32
1 x 15/32
1 x 15/32
550
660
1200
1660
1660
1660
1660
1660
1660
1.20
2.00
4.00
4.50
4.75
5.25
6.50
7.75
9.00
8
10
12
16
20
24
1-1/16 x 1/2
1-1/16 x 1/2
1-1/16 x 1/2
1-1/16 x 1/2
1-1/16 x 1/2
1-1/16 x 1/2
1800
1800
1800
1800
1800
1800
4.00
4.50
4.75
5.00
5.50
6.30
One Handed, Self-Centering Jig & Fixture Clamps
• Combination floating head and rotating spindle
holds, fixes and aligns different material thickness at a 90 degree angle. Ideal for plates,
angle iron, square tubing, pipe, channel iron, etc.
• Made of spheroidal cast iron for use as heavy
duty welders' vise
• Copper plated Acme screw protects against
weld splatter.
• Slotted base holes mount easily to work table.
• High wall construction easily holds pipe &
square tubing.
Cat.
No.
WSM-9
WSM-12
Cat.
No.
Standard Handle
LC-4
2-3/8
4
400
LC-6
3-1/8
6
500
LC-8
4
8
770
LC-10
5
10
880
LC-12
5-1/2
12
1110
LC-20
5
20
1440
Offset Handle... for more leverage
1800L-12 5-1/2
12
1800
Approx.
Wt.
(lbs)
1.10
1.30
2.40
3.30
5.10
5.30
7.00
Description
PG-12
Aluminum handle
PG-24
Aluminum handle
PG4.012
Wood handle
PG4.024
Wood handle
19 -106
Nominal
Throat Nominal
Depth
Opening
(in)
(in)
4
4
4
4
12
24
12
24
Hand Tools
Miter
Cap.
Sides
(in)
7
9-1/2
Joints for Approx.
Each Side
Wt.
(in)
(lbs)
3-1/2
10.00
4-3/4
18.00
Jaw
Length
(in)
5
Nominal
Opening
(in)
4
Approx.
Wt.
(lbs)
21.50
Bessey Welders’ Corner Clamps
• Open construction for more access to material being welded
• Holds different thickness of metals at 90° angles.
Nominal
Opening
(in)
2
4
Approx.
Wt.
(lbs)
3.00
6.00
Bessey SuperGripsTM
Light clamping pressure a simple squeeze on the handy
two-way lever
Maximum pressure... a hefty crank on the power handle.
• Bright-drawn, spring tempered “I” Beam Steel Rail –
minimizes flexing & bending... won't ever rust
• Quick Release Button – for rapid movement of sliding arm.
• Glass-Fiber, Reinforced Polymer Housing & Hand Lever
– Light in weight to reduce worker fatigue... space-age
tough for industrial use.
• Aluminum or Wooden Handle
• Innovative Two-Way Hand lever - Gives you the flexibility
to operate the clamping action from either side of your work.
• Over-Sized, ACME thread - for positive grip w/minimum turns.
Cat.
No.
Jaw
Cat.
Height
No.
(in)
WVS-4 1-1/2
Cat.
No.
H94/1
H94/2
The Award Winning Bessey PowerGripTM
19
Passage Total
Jaw
for “T”
Length Joints
(in)
(in)
4
2-1/2
4-1/2
4
Dual vises that swivel independently 5° to 180° on base plate
• Vises come with locking set screw to position and lock vise at
pre-determined angle for repetitive work
• Copper plated Acme screw protects against
weld spatter
• Made of spheroidal cast iron making it a heavy
duty welders’ vise
• Slotted base holes provide easy mounting to
work table
• Vises can be removed from base plate to be
used independently as welders' vises
The Rapid Action Lever Clamp is a great clamp where multiple clamps
need to be set up and taken down quickly... the ideal clamp for high
volume production.
Nominal
Clamping
Pressure
(lbs)
Jaw
Height
(in)
1-1/2
2-1/2
Bessey Welders’ Multi-Angle Vise Set
SPECIALTY WELDING & INDUSTRIAL CLAMPS
Bessey Rapid Action Lever Clamp
Nominal
Throat Nominal
Depth
Opening
(in)
(in)
Bessey WSM Welders’ Angle Clamp
Nominal Clamping
Pressure Pressure
w/ Lever w/ Handle
(lbs)
(lbs)
200
200
200
200
1000
1000
1000
1000
With conventional grip pliers, the jaw opening has to be adjusted
for different tasks, resulting in uncontrolled clamping pressures
and time-consuming manual operations and the jaws do not
remain parallel with each other.
BESSEY SuperGrips solve these problems
by combining the adjustability of the sliding
jaw of screw clamps with the conventional
grip pliers design.
The jaws of the BESSEY SuperGrip pliers
remain parallel or at the proper angle to each
other in any position. The preset clamping
SuperGrip
pressure remains the same, regardless of the
distance between the jaws.
TM
– continues –
Approx.
Wt.
(lbs)
2.50
3.50
2.80
3.50
WWW.HANESSUPPLY.COM
Albany/NE Division:
518.438.0139
Rochester Division:
585.235.0160
FAX:
FAX:
FAX:
716.826.4412
518.438.5343
585.235.0229
CCISCO: 843.238.1338
FAX:
843.238.8337
Hand Tools
James Morton™
Bessey T-Bar Clamps
Bessey SuperGrips (continued)
TM
Nominal
Throat
Depth
(in)
Cat.
No.
Nominal
Opening
(in)
Nominal
Clamping
Pressure
(lbs)
Standard SuperGrips
SMG-2
1-3/4
2
222
SG-4
2-1/2
4
440
SG-4WP (w/pads) 2-1/2
4
440
SG-8
2-1/2
8
440
SG-8WP (w/pads) 2-1/2
8
440
SuperGrip Accessories
SG Pads (set of 2 pads fits SG-4 and SG-8)
MultiGripTM
SG2-MGR
2-3/4
2-1/2
222
Welders’ Ground
SG-GC
2-3/4
2-1/2
310
Welders’ Fork
SG24-WF
4
3
310
VarioGrip Welders’ Fork
SG24-VWF
4
2-1/8
310
Deep Reach
SG5-DR
4-1/2
3
310
Pipe Clamps
SG24-PC
4-1/2
3
310
• Fast, easy adjustment of movable jaw simply slide to work piece, locate
jaw at closest convenient hole in rail & lock jaw in position w/clamping pin.
• Sliding and adjustable jaws are malleable cast iron, “T” section rail is steel
Approx.
Wt.
(lbs)
1.00
2.50
2.50
3.00
3.00
Cat.
No.
BT-36
BT-70
BT-96
BT-120
0.10
2.50
CL-12
CL-24
CL-40
CLS shoe
Nominal
Throat
Depth
(in)
Nominal
Clamping
Pressure
(lbs)
12
24
40
4
4
4
1775
1775
1775
2.75
2.50
2.75
Approx.
Wt.
(lbs)
5.75
7.25
9.50
0.75
• Floating pads tilt 60° inward or outward - ideal for
clamping or aligning round, oval and angular pieces
• Solves hard-to-clamp problems without damaging the
clamp
• Assembly swivels 360° or can be fixed
• Easy installation and removal
• Fits up to 2400 series clamps
39
70
98
120
2
2
2
2
3990
3990
3330
2660
2x2
2x2
2x2
2x2
18.00
26.00
32.00
40.00
Nom.
Length
(in)
Nom.
Width
(in)
Nom.
Height
(in)
Nom.
Thkns.
(in)
2
3
4
6
10
14
Wt.
Ea.
(lbs)
1.50
2.25
3.00
2
2-3/4
2-3/4
1
1-9/16
1-9/16
3.50
8.00
10.00
3/8
3/8
3/8
3/8
3/8
0.40
0.40
0.40
0.40
0.40
Vibration proof, ratchet action mechanism is fast
and secure. Ideal for milling or drilling on
machines equipped with “T” slots. Clamp swivels
and has a quick release button to instantly
release pressure.
Nominal
Opening
(in)
Nominal
Throat
Depth
(in)
Nominal
Clamping
Pressure
(lbs)
Approx.
Wt.
(lbs)
8
4-1/2
2660
6.50
Cat.
No.
1200HD-9
2400HD-10
Nominal
Throat
Depth
(in)
Nominal
Opening
(in)
Nominal
Clamping
Pressure
(lbs)
Approx
Wt.
(lbs)
4-1/4
4-1/2
8
10
1220
2220
3.50
8.00
19
Hand Tools
• Portable clamp and bushing assembly for fast, secure clamping on any
flat surface with appropriate hole
• Two position bushing assembly - use in either
a fixed or rotating position
• Comes with 1-13/16" round bushing
• Full rotation through 360° radius for easier
work set-up and positioning outside of work
area
FC24-8
Approx.
Wt.
(lbs)
Hold Down Table Clamps
Approx.
Wt. (lbs)
2.00
Bessey Jig & Fixture Clamp
Cat.
No.
Nominal
Rail
Size
(in)
For
Cat.
Bolts
No.
(in)
Quick Set Blocks
SB-82
SB-83
SB-84
Quick Set Straps
PS-876
5/8 - 7/8
S-100
3/4 - 1
S-1000
3/4 - 1
Quick Set Washers
W-500
1/2
W-625
5/8
W-750
3/4
W-875
7/8
W-1000
1
Bessey Variable Angle Device
(VAD Pad)
Cat.
No. Description
VAD Set of two
Nominal
Clamping
Pressure
(lbs)
Hold Down Clamping System
Quick Set Hardened Straps... drop forged OR cold-drawn, heat-treated
straps
Quick Set Blocks... drilled and riveted at one end - individual leaves
rotate independently to match clamping height (leaf thickness approx. 1/8")
Quick Set Heavy Duty Washers... 3/8" thick,
2-5/8" OD - matched to Quick Set System
Quick Set Kits... regular OR heavy duty kits
depending on your application.
Quick Set Kits:
Regular Duty
QS-16 - 6 Blocks (2 each of SB-82, SB-83,
SB-84), 2 Drop Forged Straps (PS-876)
8 Washers (2 each of W500, W625, W750,
W875)
Heavy Duty
HQS-20 - 12 Blocks (4 each of SB-82, SB-83,
SB-84). 2 Heavy Duty 14" Straps (S-1000),
12 Washers (4 each of W750, W875, W1000)
3.00
...for precision clamping in tight workspaces.
• Spindle mechanism can be positioned outside working area... for use on small projecting surfaces and
confined spaces.
• With stop-screw removed, sliding arm can be
reinstalled upside-down for use as a spreader
(requires optional CLS shoe).
Nominal
Opening
(in)
Nominal
Throat
Depth
(in)
WORK HOLD DOWN SYSTEMS
Jamacc Quick Set
2.50
Bessey Claw Clamp
Cat.
No.
Nominal
Opening
(in)
Claw Machine Clamp
• Cantilever jaw for clamping in tight work areas with
screw positioned outside of work area
• Full rotation through 360° radius for easier work set-up
and positioning outside of work area
Cat.
No.
MCL-8
Nominal
Throat
Depth
(in)
Nominal
Opening
(in)
Nominal
Clamping
Pressure
(lbs)
Approx.
Wt.
(lbs)
8
5-3/4
1760
6.75
WWW.HANESSUPPLY.COM
19 -107
Albany/NE Division:
518.438.0139
Rochester Division:
585.235.0160
FAX:
FAX:
FAX:
716.826.4412
518.438.5343
585.235.0229
CCISCO: 843.238.1338
FAX:
843.238.8337
Hand Tools
James Morton™
BAS Machine Clamping System
The BAS system is a family of compact components with automatic clamping and releasing mechanisms to save set-up/take-down time. The Bessey
BAS system takes about 30% less surface area and about 50% less overall space, yet can reach clamping pressures to over 3,000 lbs. The modular design allows an operator to stack up to 10 base units one on top of
the other to a height of over 30".
• Housing and clamping arm, made of tempered high-grade steel extreme strength, long life.
• Self-locking worm gear - fast, powerful
clamping.
• Seal on clamping arm protects interior from
contamination.
• Aluminum pressure shoe clips simply into
place - efficient distribution, prevents damage to work
• Finger grips on both sides of clamp for positioning.
BASC 9-4
Nominal
Clamping
Cat.
Pressure
No.
(lbs)
BASC 9-4
3,600
BASC 10-6
2,700
BASC 10-6SP
2,700
BASCB 9-4
3,600
BASCB10-6
2,700
BASCB 10-6SP
2,700
BASO (Clamping Base)
BASKN (wrench)
Clamp
Height
(in)
3-1/2
3-13/16
3-13/16
3-1/2
3-13/16
3-13/16
Clamp
Depth
(in)
1-5/8
2-3/8
2-3/8
1-5/8
2-3/8
2-3/8
3.2
Pressure Approx.
Arm
Wt.
(in)
(lbs)
2-15/16
3.00
3-11/16
3.30
3-11/16
3.30
2-15/16
3.00
3-7/10
3.30
3-7/10
3.30
1.00
0.70
RiteHite - Self-Positioning Hold Down
Clamping System
RiteHite Self Positioning Hold
Down Clamps
Hand Tools
D
E
F
(in)
7/32
9/32
11/32
11/32
11/32
3/8
7/16
7/16
15/32
9/16
9/16
9/16
5/8
3/4
11/16
5/8
11/16
3/4
11/16
3/4
(in)
11/16
7/8
7/8
7/8
1
1-1/8
1/8
1-1/8
1-1/4
1-1/4
1-1/8
1-1/2
1-5/8
1-3/4
1-5/8
1-5/8
1-5/8
1-3/4
1-5/8
1-3/4
(in)
7/8
7/8
1-1/8
1-1/8
1-1/8
1-1/8
1-1/4
1-1/4
1-1/4
1-1/2
1-1/2
1-1/2
1-3/4
1-3/4
2
1-3/4
2
2
2
2
Approx.
Wt. (lbs)
0.05
0.03
0.13
0.10
0.14
0.17
0.21
0.19
0.32
0.37
0.34
0.41
0.55
0.86
0.76
0.84
0.72
0.98
1.31
0.91
Kant-Twist® Clamps
Unique cantilever clamp with floating jaws that always stay parallel built-in “V” block to hold round stock - copper plated jaws and screws
resist weld spatter
Stainless Steel Kant-Twist®
• For use where corrosion and magnetism are a problem
Kant-Twist® Weaver Grip
RiteHite (single)
T-Slot Accessories
T-Slot Nuts
• Hardened machine surfaces will not damage underside of T-slot
• Morton T-slot nuts are NOT threaded through to eliminate the risk of
screwing the stud through the nut and damaging the table slot
Cat.
Thread
Approx.
No.
Size (in)
Wt. (lbs)
Flange Nuts: Hardened steel for long life
375FN
3/8-16
0.05
500FN
1/2-13
0.11
625FN
5/8-11
0.18
750FN
3/4-10
0.31
875FN
7/8-9
0.42
1000FN
1-8
0.59
• Comfortable grip affords maximum
pressure with less effort
• Easy to tap on and off
• Made from high quality ABS plastic for
durability
Cat.
Opening A
No.
Max.
Min.
Original Kant-Twist®
3/4
3/4
0
1
1/16
0
2
2
0
2-1/2D (Deep Throat)
2-7/16
0
3
3
0
4-1/2D (Deep Throat)
4-1/2
0
6
6
0
6D (Deep Throat)
6
0
6D3J (Deep Throat/3 jaw)
6
0
9
9
0
10D (Deep Throat)
10
0
12
12
2
®
Stainless Steel Kant-Twist
2-SS
2
0
3-SS
3
0
4-1/2D-SS (Deep Throat)
4-1/2
0
®
Kant-Twist Welders’ Ground
400A-1J
4-1/2
0
Cat.
No.
1 WG
2 WG
3 WG
4 WG
For Models...
1
2, 2-1/2, 2SS
3, 3F, 3FT, 4-1/2D, 3SS, 4-1/2DSS
6, 6D, 6F, 6FT
– continues –
19 -108
C
(in)
1/2
1/2
5/8
5/8
5/8
3/4
3/4
3/4
3/4
1
1
1
1
1-1/2
1-1/8
1
1-1/8
1-1/2
1-1/8
1-1/2
• Full 4.5" opening can be simultaneously used as a clamp and ground
• Brass terminal lug grounds up to 400 amps.
• Heavy duty construction for high pressure and secure grounding
Max.
Max.
Approx.
Stud Clamping
Nominal
Load
Weight
Cat.
Size
Height
Dim.
Limit
Each
No.
(in)
(in)
(in)
(lbs)
(lbs)
RiteHite Model L - Long Reach
375L
3/8
1-1/4
1-1/8 x 3-1/2
10,000
0.50
500L
1/2
2-1/2
1-7/16 x 5-3/4
12,800
1.40
625L
5/8
3-1/2
1-7/8 x 6-3/4
18,000
2.50
750L
3/4
5
2-1/8 x 9
24,000
4.75
1000L
1
5
2-7/8 x 11-1/8
65,000 12.00
RiteHite Model S - Short Reach (closer set-ups)
376S
3/8
1
1-1/8 x 3
14,000
0.50
501S
1/2
1-3/4
1-3/8 x 4-1/4
16,800
1.00
626S
5/8
2-3/4
1-7/8 x 5-1/2
24,000
2.00
751S
3/4
3-1/2
2x7
35,000
4.00
1001S
1
3
2-7/8 x 9
80,000 10.00
Cat.
Thread
Approx.
No.
Size (in)
Wt. (lbs)
36" Threaded Rod: Heat-Treated Steel
375HSTS
3/8-16
0.90
500HSTS
1/2-13
1.60
625HSTS
5/8-11
2.60
750HSTS
3/4-10
2.65
875HSTS
7/8-9
5.00
1000HSTS
1-8
6.60
A
B
Cat.
Thread Table Slot
No.
Size (in) Size (in)
716TN
3/8-16
7/16
12TN
3/8-16
1/2
916TN
3/8-16
9/16
916TN1
1/2-13
9/16
58TN
1/2-13
5/8
58TN1
1/2-13
5/8
1116TN
1/2-13
11/16
1116TN1
5/8-11
11/16
34TN
5/8-11
3/4
1316TN
5/8-11
13/16
1316TN1
3/4-10
13/16
78TN
3/4-10
7/8
1000TN
3/4-10
1
1000TN1
3/4-10
1
10116TN
3/4-10
1-1/16
1000TN2
7/8-9
1
10116TN2 7/8-9
1-1/16
1018TN1
7/8-9
1-1/8
10116TN1
1-8
1-1/16
1018TN
1-8
1-1/8
Kant-Twist® Welders’ Ground
• Single component design for selfpositioning hold down clamp
• Swivel rocker attached to body to
prevent loss
• Instant set-up increases
productivity…eliminates shim stock
• Wide clamping range with instant
adjustment up to 5"
• Strong, ductile iron body
19
T-Slot Accessories
(continued)
WWW.HANESSUPPLY.COM
Nominal
Clamping Approx.
Pressure Wt.
(lbs)
(lbs)
B
C
D
3/8
1/2
1-1/8
2
1-1/4
2-1/4
2-1/8
4-5/8
4-1/2
3-3/8
6
5
3/8
1/2
1-1/4
1-13/16
1-3/4
2-1/2
3-1/8
5-1/2
5-1/2
5-1/4
7-1/2
7
1/4
5/16
1/2
1/2
1/2
7/8
7/8
7/8
7/8
1-1/4
1-1/4
1-1/4
200
300
700
700
1500
1500
1800
1800
1800
3500
3500
6000
0.06
0.86
0.38
0.56
1.00
2.00
3.00
4.00
4.50
7.50
10.75
13.00
1-1/8
1-1/4
2-1/4
1-1/4
1-3/4
2-1/2
1/2
1/2
7/8
700
1500
1500
0.38
1.00
2.00
2-1/2
2-1/2
1-1/2
1700
2.00
Dia.
(in)
1/2
1-1/16
7/8
1-1/8
Approx.
Length
(in)
1-1/2
2-1/2
4
5
Wt.
(lbs)
0.10
0.10
0.10
0.10
Albany/NE Division:
518.438.0139
Rochester Division:
585.235.0160
FAX:
FAX:
FAX:
716.826.4412
518.438.5343
585.235.0229
CCISCO: 843.238.1338
FAX:
843.238.8337
Hand Tools
James Morton™
INDUSTRIAL & WELDERS’ MAGNETS:
MagSweep
Multi-Purpose Magnetic Squares
When it comes to sweeping up metal
you can stash the broom forever. For
big jobs inside or outside, the handy
MagSweep has a powerful magnet that
sweeps a 24" wide swath. A simple pull
on the waist level handle dumps the
payload. Large wheels for easy rolling.
...like having a second pair of hands!
High quality, rare earth magnets are designed
for fast, simple set-ups
• Hold work firmly at 45°, 90° or 135° angle...
double magnets can be set at ANY angle
• Enclosed models prevent filings and dirt
from getting in magnets.
• Large 100 lb. pull models are supplied with
“T” handles to “break” magnet from work
Cat.
No.
WMS-1
Open
WMS-2 Enclosed
WMS-3 Compact
WMS-4
Double
CMS-1
Chunky
BDMS-1 Big Daddy
Nominal Nominal
Width
Height
(in)
(in)
3-3/4
4-3/8
3-3/4
4-3/8
3-3/8
3-3/8
6-1/8
3-3/8
3-3/4
4-3/8
8
8
Nominal
Thkns
(in)
3/4
3/4
5/8
5/8
1-1/2
1-5/8
Ave.
Pull
(lbs)
57
57
55
110
100
100
Cat.
No.
MBC
MBT
MPU-1
MPU-12
Approx.
Description
Wt. (lbs)
BeltMag Clip (single item)
0.25
MagBend-it (single item)
0.25
MagPick-up Pal (single item)
1.50
MagPick-up Pal
19.00
(12 MagPick-up Pals in POP floor display)
MS-1
MagStik (single item)
0.25
MS-18
MagStik (18 MagStiks on easel card)
4.50
MSP-24 MagSweep
45.00
Approx.
Wt.
(lbs)
1.00
1.00
0.70
1.40
2.75
9.50
Mor-Vac Pump Kits
Spring loaded electrode secures ground to
work surface; rotating stud assembly allows
ground wire to rotate 360° free of work area.
Nominal Connection Ave.
Height
Stud Size Pull
(in)
(in)
(lbs)
2
1/2
55
2-1/2
1/2
55
Approx.
Wt.
(lbs)
1.25
1.25
The MagWand
• Safer Workplace - No more cuts from picking up metal scrap and waste
• Cleaner Workplace - No more tedious, manual handling of dirty shop
waste
• Economical Workplace - Recover Steel
items in hard-to-reach places
• Efficient Workplace - Retrieve, separate
and re-use small parts
CATALOG NO. - MW-1
- High gradient, rare earth magnet lifts up to 12 lbs.
- Magnetic Field - 7-7/8"
- Overall Length - 16"
- Diameter - 1"
- Guard Diameter - 2-1/2"
- Shipping Weight - 1.60 lbs.
BeltMag Clip
BeltMag
Clip
Conveniently clips to your belt to prevent
awkward (and painful) fumbling in your
pocket or pouch for screws, nails, etc.
MagBend-it
19" bendable shaft retrieves iron objects
from hard to reach places.
MagPick-up Pal
MagStik
Powerful, permanent neodymium
magnet with handy pocket clip lifts
32 times its own weight, telescoping
barrel extends from 6" to 24"
Mag
Bend-it
Mag
Pick-up
Pal
Portable air-power Venturi pump kit designed to safely reclaim liquids from
sumps, milling machines, EDM, surface grinders, lathes, open pits and floors.
• Safely recovers coolants, metal chips, used oil, spilled liquids, sludge,
hydraulic oil, trampoil, solvents and hazardous waste.
• Mount on 3/4" bung hole - converts any size drum into a high powered
vacuum tank. When used on approved container, Mor-Vac can safely
recover hazardous material without spillage.
• Venturi design creates a very powerful vacuum
• Air-operated - safe to use in shop area
• No moving parts - maintenance free
• Filter exhaust - lower decibel level,
quieter running pump
• Automatically shuts off at 96.4%
capacity - allows for expansion
• Uses only 6 CFM at 100 PSI air supply efficient consumption
• Vertical lift - 11 ft. maximum
• Linear pull - 30 ft. maximum
• Fills 55 gallon (US) drum in 90 seconds
MPK-100 Mor-Vac Pump Kit
MP-1
Mor-Vac Pump with nipple/air control valve and safety shut-off valve
MP-2
Plastic vacuum head
MP-3
1-1/4" plastic wand (2 pc. Set)
MP-5
1-1/2" suction hose (US-8 ft.; Canada - 3m)
MP-6
(1-1/2") hose cuff
MP-8S (1-1/2") polygrip hose connector
MP-25 Crevice tool
MPKD-100 Mor-Vac Deluxe Pump Kit
MP-1
MP-5
1-1/2" suction hose (US-8 ft.; Canada - 3m)
MP-8S 1-1/2" polygrip hose connector
MP-20 Steel wand (2 pc. Set)
MP-21 Steel vacuum head with brush/squeegee
Mor-Vac Accessories & Parts
MP-1
MP-2
Plastic vacuum head
MP-3
1-1/4" plastic wand (2 pc. Set)
MP-5
1-1/2" suction hoses (sold by the foot in the US and by the meter in Canada)
MP-6
1-1/2" hose cuff
MP-8S 1-1/2" polygrip hose connector
MP-17 Drum spear
MP-20 Steel wand set (2 pcs.)
MP-21 Steel vacuum head with brush/squeegee
MP-22 Replacement squeegee
MP-23 Replacement brush insert
MP-25 Crevice tool
MP-26 Safety shut-off valve
MP-30 Replacement muffler
Pressure (PSI)
Vacuum (in Hg)
Water flow rate (gal/min)
Hydraulic oil flow rate (gal/min)
WWW.HANESSUPPLY.COM
80
8.0
26
12
100
9.0
30
16
120
9.5
36
20
19 -109
19
Hand Tools
Powerful, permanent neodymium magnet on a strong, lightweight 35" shaft
saves wear and tear on your back
around shop or home.
MagSweep
AIR FLOW SAFETY & CLEAN-UP
SYSTEMS:
Welder’s Magnetic
Ground Clamps
Cat.
Max.
No.
AMP.
MGC-1 250
MGC-2 800
MagStik
Albany/NE Division:
518.438.0139
Rochester Division:
585.235.0160
FAX:
FAX:
FAX:
716.826.4412
518.438.5343
585.235.0229
CCISCO: 843.238.1338
FAX:
843.238.8337
Hand Tools
James Morton™
Safety-Vac IITM Air Gun
Reco Induction Bearing Heater (continued)
• The Safety-Vac II uses two air flow principles, Venturi and Vortex.
• One system can be used as both a blower and a vacuum.
• The Safety-Vac II has no moving parts so it is maintenance free.
The unique venturi design increases air volume 10 fold. Air is exhausted in
a spiral form enabling material to be quickly conveyed over long distances.
Nominal input - 10 cfm @ 80 psi.
Safety-Vac II is ideal for vacuuming around shops and other industrial
environments to pick up sawdust, metal chips, abrasive grit, granular
material, plastic beads, paper, textile trimmings and more.
The Safety-Vac II Air Gun is made of durable aluminum and is resistant
to most chemicals. A dust bag and full line of hoses and accessories are
available.
Cat. No.
Description
SVK-1 Safety-Vac Hose Kit
SV-400
Safety-Vac II Air Gun
SV-8
(1-1/4") Suction Hose*
SV-0
(1-1/4") Hose Clamp
SVK-2 Safety-Vac Dust Bag Kit
SV-400
SV-1
Dust Bag
SVK-3 Safety-Vac Deluxe Hose Kit
SV-400
SV-8
SV-0
(1-1/4") Hose Clamp
SV-2
Vacuum Head
SV-3
(18") Long Reach Wand
SV-4
Wand Extension
SV-7
Bench Nozzle
SVK-4 Safety-Vac Deluxe Dust Bag Kit
SV-400
SV-1
Dust Bag
SV-2
Vacuum Head
SV-3
SV-4
Wand Extension
SVK-5 Safety-Vac Master Hose Dust Bag Kit
SV-400
SV-1
Dust Bag
SV-2
Vacuum Head
SV-3
SV-4
Wand Extension
SV-8
Safety-Vac Accessories & Parts
SV-400
SV-0
(1-1/4") Hose Clamp
SV-1
Dust Bag
SV-2
Vacuum Head
SV-3
SV-4
Wand Extension
SV-5
Crevice Tool
SV-6
Round Brush
SV-7
Bench Nozzle
SV-8
(1-1/4") Suction Hose**
SV-10
(1-1/4") Polygrip Hose Connector
SV-13
Replacement Dust Bag
Cat.
No.
SC 110
SC 220
BC 220
BC 440
BC 550
BCS 220
BCS 440
BCS 550
12-1/4
7
1-1/4
1-1/4
F
9
16
16
Std.
Optional Approx.
Cross Bars
Cross
Wt.
(in)
Bars (in) (lbs)
3/4, 1-1/4, 2
1/2*
52.00
3/4, 1-1/4, 2
1/2*
52.00
1-1/4, 2, 3
3/4, 1
200.00
1-1/4, 2, 3
3/4, 1
200.00
1-1/4, 2, 3
3/4, 1
200.00
1-1/4", 2, 3
1*
235.00
1-1/4, 2, 3
1*
235.00
1-1/4, 2, 3
1*
235.00
Voltage
110V (17 AMP)
220V (9 AMP)
220V (30 AMP)
440V (20 AMP)
550V (20 AMP)
220V (30 AMP)
440V (20 AMP)
550V (20 AMP)
BEARING SENTRY
Reco Induction
Add precision to your
Bearing Heater
bearing heater with the
Bearing Sentry.
Bearing
• Easy-to-use monitor for
Sentry
your bearing heater... cuts
cost & saves time.
• Prevent overheating...
reduce bearing damage for
longer life.
• Increases productivity...
eliminates time wasted
watching bearings heat.
• Temperature sensor –
3' armored lead.
• Bearing heater capacity - up to 17amp.120VAC, single phase (without
auxiliary contactor) Note: Auxiliary Contactor required for use in Canada
* (1-1/4") Suction Hose - in the
United States hose length is 8',
in Canada hose length is 3m
** (1-1/4") Accessory Suction Hose
- sold by the foot in the United
States and by the meter in
Canada
RECO INDUCTION BEARING HEATER
The superior method of expanding bearings, gears, sprockets, couplings
and sleeves for placement on shafts.
• Ready to use in minutes - mount bearing quickly reduce downtime
• Eliminates hammering and pounding to cold-mount bearings... extends
bearing life and cuts operating costs
• Easy to use... cuts labor costs
• Works on bearings, sprockets, gears, couplings, sleeves... increases
productivity
• No more open flames, torches or open oil baths for heating... reduces
risk to operator
• Comes with three standard cross bars…wide size range of bearing
application
Bearing Sentry II
• Three user-adjustable temperature presets – shows the temperature
presets – shows the temperature through a digital display.
• Cycles power to the heater to maintain desired temperature.
Bearing Sentry III
• Three user-adjustable temperature presets – shows the temperature
through a digital display.
• Cycles power to the heater to maintain desired temperature.
• Demagnetizes the bearing.
Cat.
No.
BS-II
BS-III
Width
(in)
10-1/2
10-1/2
NOTE Reco Bearing Heaters also demagnetize bearings - simply remove bar, turn
heater on and pass bearing several times between the two upright columns without
contacting them.
– continues –
19 -110
BC Special
E
9-1/4
14-3/4
18-3/4
* only available in the USA
Bearing Heater and Bearing Sentry:
Hand Tools
BC Model
• 220V, 440V or 550V models
• Capacity: bearings
Bearing Heater Dimensions (in)
up to 8" wide x 22"
O.D. (or 32" O.D.
Cat. No.
A
B
C
D
with optional raising
SC
4-3/8 3-5/8
3/4
3/4
blocks)
BC
8
7
1-1/4 1-1/4
BC Special Model
• 220V, 440V or 550V
models
• Capacity: bearings
up to 12-1/4" wide x
22" O.D.
(or 32" O.D. with
optional raising
blocks)
BEARING HEATERS & ACCESSORIES
19
SC Model
• 110V or 220V models
• Capacity: bearings up to 4-3/8" wide x 11" O.D.
(or 14" O.D. with optional raising blocks)
WWW.HANESSUPPLY.COM
Depth
(in)
10-1/2
10-1/2
Height
(in)
4
4
Temp. Range
°F
180 - 300
180 - 300
Approx. Wt.
(lbs)
8
8
Albany/NE Division:
518.438.0139
Rochester Division:
585.235.0160
FAX:
FAX:
FAX:
716.826.4412
518.438.5343
585.235.0229
CCISCO: 843.238.1338
FAX:
843.238.8337
Hand Tools
James Morton™
Morton Pyrometer/Thermometer
Tradesman Bar Clamps (continued)
• Multi-purpose heat measuring tools for a wide variety of uses from bearings, gears, etc. to pre-heating or post-heating measurements for welding inspection
• Digital temperature readings in either Celsius or Fahrenheit to cover a
wide range of temperatures from -80°C (-112°F) to +1100°C (+1999°F)
• Standard probe withstands temperatures up to 550°C (1022°F)
• Accurate to ± 1° eliminates
guesswork and overheating
• Available with either bayonet
probe for one hand use while
welding or flexible cord probe
for bearings
• Economical and long lasting to
be more cost effective than
consumable crayons
Cat.
No.
39658K
5028KW
50318K
50028KW
Approx.
Description
Wt. (lbs)
Pyrometer w/probe & flexible cord
2.0
Pyrometer w/bayonet probe
2.0
Replacement Probe Only
0.3
Probe & Bracket Only
0.1
Raising Blocks
Raising blocks (sold in pairs) lift bearing heater crossbar to
accommodate larger diameter bearings.
Cat.
Height
Width
Approx.
No.
(in)
(in)
Wt. (lbs)
SCRB
2-3/8
2-5/8
7.50
(fits SC bearing heaters)
BCRB
5"
3-5/8
31.00
(fits BC and BC Special bearing heaters)
Sold in Pairs Only
CONTRACTOR & WOODWORKER CLAMPS:
Bessey TradesmenTM Bar Clamps
The Original Bessey
Malleable, Cast-Iron Bar
Clamp... The world’s largest
selling bar clamp
The Bessey design is unmistakable with its patented non-slip
locking mechanism; corrugated
cast jaws; high quality profiled
rail; coated Acme thread and
large ergonomic wood handle.
The Bessey Tradesmen Bar
Clamp is a respected reliable
workhorse.
Nominal
Rail
Size
(in)
1-1/4 x 3/8
1-1/4 x 3/8
1-1/4 x 3/8
1-1/4 x 3/8
1-1/4 x 3/8
1-1/4 x 3/8
1-1/4 x 3/8
1-1/4 x 3/8
1-1/4 x 3/8
1-1/4 x 3/8
1-1/4 x 3/8
1-1/4 x 3/8
1-1/4 x 3/8
1-1/4 x 3/8
1-1/4 x 3/8
1-1/4 x 1/2
1-1/4 x 1/2
1-1/4 x 1/2
1-1/4 x 1/2
1-1/4 x 1/2
1-1/4 x 1/2
Nominal
Clamping
Pressure
(lbs)
1540
1540
1540
1540
1540
1540
1540
1540
1320
1320
1320
1320
1320
1320
1320
1550
1550
1550
1550
990
990
Approx.
Wt.
(lbs)
6.00
7.00
8.00
9.00
10.50
11.50
14.50
17.50
5.00
6.30
8.00
6.00
7.00
9.00
10.00
12.00
12.00
14.00
14.00
20.00
20.00
The Bessey K BodyTM Clamps
Serious hobbyists and professionals tell us the K Body is
their favorite woodworking clamp. Its unique, guided jaws
with large, flat faces make it ideally suited for clamping
components at right angles…without twisting or tilting. The
polyamid clad jaws are glue-resistant and provide a soft
touch for delicate projects.
Cat.
No.
K3.512
K3.524
K3.531
K3.540
K3.550
K3.560
K3.582
K3.598
Nominal
Throat
(in)
3-1/2
3-1/2
3-1/2
3-1/2
3-1/2
3-1/2
3-1/2
3-1/2
Nominal
Opening
(in)
12
24
31
40
50
60
82
98
Nominal
Rail Size
(in)
1-1/8 x 3/8
1-1/8 x 3/8
1-1/8 x 3/8
1-1/8 x 3/8
1-1/8 x 3/8
1-1/8 x 3/8
1-1/8 x 3/8
1-1/8 x 3/8
Nominal
Pressure
(lbs)
1100
1100
1100
1100
1100
1100
1100
1100
Approx.
Wt.
(lbs)
4.50
5.50
6.50
7.30
8.00
9.30
11.50
13.50
Bessey Wood Handscrew Clamps
Approx.
Wt.
(lbs)
1.00
1.80
2.00
2.30
2.50
3.00
3.50
2.50
2.80
3.00
4.80
6.30
Large spindle diameter for added strength and durability. Spindles
and swivel nuts are made from cold drawn carbon steel. Acme thread
for rapid operation and years of hard use.
Over-sized hardwood for comfort and extra torque.
Spiral pin secures the handles to the spindle - easy
removal for repair or replacement.
All metal parts are treated to resist rust. The jaws
are manufactured from hard maple to stand up to a
lifetime of use and are oiled to resist glue.
Cat.
No.
HS-4
HS-5
HS-6
HS-8
HS-10
HS-12
HS-14
Jaw
Max.Jaw
Length Opening
(in)
(in)
4
2-1/4
5
2-3/4
6
3
8
5
10
7
12
9-1/4
14
10-1/4
Throat
Depth
(in)
2
2-1/2
3
4
5
6
7
Spindle
Dia.
(in)
1/4
1/4
5/16
7/16
7/16
7/16
7/16
Approx.
Wt.
(lbs)
0.50
0.50
1.00
1.25
1.75
2.00
2.25
19
Hand Tools
TradesmenTM Medium Duty Bar Clamps
Nominal
Nominal
Nominal
Throat Nominal
Rail
Clamping
Cat.
Depth Opening
Size
Pressure
No.
(in)
(in)
(in)
(lbs)
TG2.004
2
4
19/32 x 3/16
450
TGJ2.506
2-1/2
6
1 x 1/4
600
TGJ2.512
2-1/2
12
1 x 1/4
600
TGJ2.518
2-1/2
18
1 x 1/4
600
TGJ2.524
2-1/2
24
1 x 1/4
600
TGJ2.530
2-1/2
30
1 x 1/4
600
TGJ2.536
2-1/2
36
1 x 1/4
600
TG4.008
4
8
1 x 5/16
880
TG4.012
4
12
1 x 5/16
880
TG4.016
4
16
1 x 5/16
880
TG4.524
4-1/2
24
1 x 5/16
1100
TG4.540
4-1/2
40
1 x 5/16
1100
TradesmanTM Heavy Duty Bar Clamps
Nominal
Throat Nominal
Cat.
Depth Opening
No.
(in)
(in)
TGK4.516
4-1/2
16
TGK4.524
4-1/2
24
TGK4.531
4-1/2
31
TGK4.540
4-1/2
40
TGK4.550
4-1/2
50
TGK4.560
4-1/2
60
TGK4.579
4-1/2
79
TGK4.598
4-1/2
98
TG5.512
5-1/2
12
TG5.524
5-1/2
24
TG5.540
5-1/2
40
TG7.016
7
16
TG7.024
7
24
TG7.040
7
40
TG7.048
7
48
CDS 20-10 (w/o pads)
10
20
CDS 20-10WP (w/pads)
10
20
12
20
12
20
20
20
20
20
Replacement Protective Pads
TRP2.5 - fits TGJ 2.5 clamps
TRP4.0 - fits TG 4.0 clamps
TRP4.5 - fits TG 4.5 clamps
TRP5.5 - fits TGK 4.5, TG 5.5 & TG 7.0 clamps
– continues –
WWW.HANESSUPPLY.COM
19 -111
Albany/NE Division:
518.438.0139
Rochester Division:
585.235.0160
FAX:
FAX:
FAX:
716.826.4412
518.438.5343
585.235.0229
CCISCO: 843.238.1338
FAX:
843.238.8337
Hand Tools
James MortonTM/Nes
Nes
Bessey WS Angle Clamps
These versatile clamps are designed to always hold, fix and align material
at a 90° angle and adjust automatically to variations in wood thickness.
Their accuracy makes them ideal for many applications including cabinet work, furniture assembly,
framing and their compact size fits easily into a tool
box for site work.
The WS features: Galvanized spindle with large
Acme thread; accurate, durable, die cast jaws are
plastic coated to protect work; open design allows
ample clearance to screw, dowel or staple material
together while gluing.
Dif.
Material
Thkns.
(in)
side one: 7/8
side two: 2-1/2
WS-6
side one: 1"
side two: 6
TK-6 - Table Clamps (Pair)
Cat.
No.
WS-3
Uniform
Material
Thkns.
(in)
side one: 2
side two: 2
side one: 4
side two: 4
Clearance
for
T-Joints
(lbs)
1-1/8
Approx.
Wt.
(lbs)
2.50
2-7/16
4.50
Nes - Universal Thread Restorer
• Adjusts automatically to any thread diameter and pitch.
• No measuring of thread required
• Can be used on right or left hand threads
• Applicable to all kinds of threads – both inch and metric
• Two handed steel blades (58 RC), guided by the existing thread,
regroove the damaged area.
An essential tool for anyone who deals with nuts and bolts in: Maintenance,
garages, plumbing, construction, agriculture and engineering.
0.50
JamaccTM Pipe Clamp Fixtures
• Plated spindles to prevent rust & corrosion
• “Clutch” action grips bar automatically
• Large clamping surface - positive grip
• Large handle - positive pressure
Cat.
No.
PC-12
PC-34
Pipe
Dia. (in)
1/2
3/4
Approx.
Wt. (lbs)
2.00
3.00
PC-12
PC-34
Turn handle (A) to raise
blades (B). Place Nes
over bolt to be repaired
Turn handle (A) to lower
blades into grooves of
thread and tighten lightly
Turn Nes in direction of
the arrow
JamaccTM Steel Spring Clamps
These clamps feature: heavy duty springs for more
pressure and longer life; nickel plating - won’t rust or
mark work piece; heavy duty vinyl tips and handles
won't mar clamping surfaces.
Nominal
Cat.
Opening
No.
(in)
SC1-HT
1
SC2-HT
2
SC3-HT
3
SC4-HT
4
Maximum Clamping
Opening Pressure
(in)
(in)
1-1/4
33.0
2-1/4
49.5
3-5/16
66.0
5
63.0
Approx.
Wt.
(lbs)
0.05
0.10
0.20
0.21
Bessey Variable Angle
Strap ClampTM
The unique, geared winder tightens the
clamp evenly from both sides at the same
time for distortion-free clamping. The integral rewinding mechanism keeps the strap
conveniently rolled-up and stored out of
the way... without twists and tangles.
Cat.
Strap
Strap
No.
Width (in) Lgth (in)
VAS-23
1
23 ft.
VAC-6 - Set of 6 extra clips
Hand Tools
19
Approx.
Wt. (lbs)
1.70
0.20
Nes1
Cat.
OD Range
LxWxH
Model
No.
(in)
(in)
Nes1A
06001 5/32 - 11/16
2-3/8 x 29/32 x 2-7/16
Nes1
06000
1/4 - 3/4
Replacement Blades for Nes1/Nes1A
NRK160° 00010
RK155° 00020
R max
(in)
WxH
(in)
0.5
2-11/16
4-1/2 x 6-1/2
0.07
2-1/2 x 5-1/8
55° for British standard
Nes2
Cat.
OD Range
LxWxH
Model
No.
(in)
(in)
Nes2
02000 11/16 - 1-1/2 4-1/8 x 1-1/4 x 4-5/16
Replacement Blades for Nes1 / Nes2
RK260° 00030
RK225° 00040
Note: For threads
RK260° 00031F
Wt.
(lbs)
0.5
0.24
3-1/8 x 5-1/6
FINE
0.24
3-1/8 x 5-1/6
RK225°
finer than
00041F
FINE
19 -112
Wt.
(lbs)
WWW.HANESSUPPLY.COM
17 T.P.I
or 1.5mm
R max
(in)
2-11/16
WxH
(in)
4-1/2 x 6-1/2
Albany/NE Division:
518.438.0139
Rochester Division:
585.235.0160
FAX:
FAX:
FAX:
716.826.4412
518.438.5343
585.235.0229
CCISCO: 843.238.1338
FAX:
843.238.8337
Hand Tools
Nes/Nicopress
Nes3
No. 17-B4 Nicopress Tool
Cat.
No.
03000
03100
OD Range
(in)
1-1/4 - 5
LxWxH
(in)
12 x 1-3/4 x 5-1/8
Model
Nes3
Ext.
Rod
Replacement blades for Nes3
RK360° 03010
RK355° 03020
RK360° 03011C
Note: For threads
coarser than
7 T.P.I.
or 3.5 mm
COARSE
RK355° 03021C
COARSE
Wt.
(lbs)
4.4
0.44
R max
(in)
9-7/8
WxH
(in)
12-3/8 x 2 x 5-1/2
This tool used to press 3/64" oval sleeves onto steel aircraft cable. The
17-B4 tool will reach confined spaces which larger tools cannot. Use this
tool to press Nicopress Part Numbers 18-11-B4, 28-11-B4, & 428-1.5-VB4
oval sleeves.
Tool Length ............... 8-1/4"
Shipping Weight ........ 3/4 lbs.
0.09
2-1/2 x 5-1/8
Important: Make three presses per sleeve.
0.09
2-1/2 x 5-1/8
No. 32-VC: VG Tool
• Adjusts automatically to any thread diameter and pitch, from 1-1/4" to 5"
• Applicable to all kinds of threads: inch and metric, right hand or left hand
• Two replaceable hardened tool steel bits (58RC), for fine coarse threads.
• Reversible blade - prevents damage to pipe surface
• Special aperture for extension rod (included) - for greater torque
A small hand tool with two sleeve-pressing grooves in the head. It is used for
splicing with Nicopress Oval & Stop
Sleeves having “C” or “G” letters in their
stock Numbers.
Tool Length ............... 11-1/2"
Shipping Weight ........ 2-1/2 lbs.
No. 51 Tools
Each tool has a single sleeve-pressing groove for the size of cable.
Range accommodated – 3/64"
through 7/32"
Tool Length ............... 18-1/4"
Nes - Internal Thread Cleaner
Model
Nes
Cleaner
Cleaner
Blade
Cat.
No.
07000
L x OD
(in)
6-1/8 x 29/32
00070
Wt.
(lbs)
0.07
OD min
(in)
Ø 3/8
R max
(in)
2-11/16
Pkg. L x W x H
(in)
6-7/8 x 1/32 x 1/32
0.01
Cat.
No.
01300
LxWXH
(in)
17 x 9-1/2 x 2-5/8
These are multiple sleeve-pressing
groove hand tools. The No. 63VXPM has three grooves & is used
only with Oval Sleeves. For cable
sizes 1/8", 5/32" & 3/16".
The No.64-CGMP has four grooves & is used for
Oval Sleeves in the range of cable sizes from 1/16" through 5/32".
The “C” groove is also used for the No. 871-1-C Stop Sleeve.
Tool Length ............... 20"
Shipping Weight ........ 6 lbs.
No. 51 Tools for Stop Sleeves
Nes - Full Set 123
Model
Nes full Set 123
Type Nos. 63 & 64 Tools
Wt.
(lbs)
2.1
Contents
Nes1 + RK1
Nes2 + RK2,
Nes3 + RK3 + extension rod,
Nes cleaner
The No. 51-MJ hand tool with two sleeve-pressing grooves is used for all
M & J lettered Nicopress Stop Sleeves for cable sizes 3/32" through 7/32".
The “M” groove of this tool can also be used for the No. 18-3-M & No. 283-M Oval Sleeves.
The No. 51-Q-929 single-groove
tool is used for galvanized steel Stop
Sleeves No. 871-1-Q & No. 871-3-Q.
Tool Length ............... 18-3/4"
No. 3 Nicopress Tool
Nes - Set 12
Replaces more than 300 dies!
Model
Nes Set 12
Cat.
No.
01000
LxWXH
(in)
6-1/2 x 9-7/16
Wt.
(lbs)
2.1
Contents
Nes1A, Nes2, RK1, RK2
Hydraulic Tool No. 635
No. 17-BA Nicopress Tool
1/32" oval sleeves & stop sleeves can be pressed with this tool. Light
weight and low cost, this handy field tool can be used with small diameter
steel aircraft cable. Use the 17-BA tool to press Nicopress part Numbers
17-1-B & 27-1-B oval sleeves & the 871-32-B stop sleeve.
Tool Length ............... 8-1/4"
Shipping Weight ........ 3/4 lbs.
Important: Make two presses per sleeve.
Larger Nicopress sleeves require great
pressing effort & the No. 635 Hydraulic
Tool is made for this purpose. Use the
No. 635 Hydraulic Tool to press the larger Nicopress oval sleeves and stop
sleeves.
We manufacture 635 tool dies to
press Nicopress sleeve sizes 3/64" thru
5/8". For other sizes, please contact a
sales rep. with your exact requirements.
WWW.HANESSUPPLY.COM
19
Hand Tools
Nicopress
These hand tools have single sleeve pressing groove heads which are
available in the following styles.
• No. 3-F6-950 – For Oval & Stop Sleeves having “F6” as part of their
Stock Numbers.
• No. 3-F2-950 – For oval sleeves having “F2” as a part of their Stock
Numbers.
• No. 3-G9-950 – For No. 18-13-G9
and No. 28-13-G9 Oval Sleeves
for 5/16" cable.
Tool Length ............... 33"
Gasoline & Electric
Powered Pumps Available
19 -113
Albany/NE Division:
518.438.0139
Rochester Division:
585.235.0160
FAX:
FAX:
FAX:
716.826.4412
518.438.5343
585.235.0229
CCISCO: 843.238.1338
FAX:
843.238.8337
Hand Tools
OZAT
Deep Fractional Sizes
OZAT
SIX POINT FRACTIONAL SOCKETS
1" SQUARE DRIVE
Standard Fractional Sizes
Hand Tools
19
Size (in)
3/4
13/16
7/8
15/16
1
1-1/16
1-1/8
1-3/16
1-1/4
1-5/16
1-3/8
1-7/16
1-1/2
1-9/16
1-5/8
1-11/16
1-3/4
1-13/16
1-7/8
1-15/16
2
2-1/16
2-1/8
2-3/16
2-1/4
2-5/16
2-3/8
2-7/16
2-1/2
2-9/16
2-5/8
2-11/16
2-3/4
2-13/16
2-7/8
2-15/16
3
3-1/16
3-1/8
3-3/16
3-1/4
3-5/16
3-3/8
3-7/16
3-1/2
3-9/16
3-5/8
3-11/16
3-3/4
3-13/16
3-7/8
3-15/16
4
4-1/16
4-1/8
4-3/16
4-1/4
4-5/16
4-3/8
4-7/16
4-1/2
Part No.
Z-1612
Z-1613
Z-1614
Z-1615
Z-1616
Z-1617
Z-1618
Z-1619
Z-1620
Z-1621
Z-1622
Z-1623
Z-1624
Z-1625
Z-1626
Z-1627
Z-1628
Z-1629
Z-1630
Z-1631
Z-1632
Z-1633
Z-1634
Z-1635
Z-1636
Z-1637
Z-1638
Z-1639
Z-1640
Z-1641
Z-1642
Z-1643
Z-1644
Z-1645
Z-1646
Z-1647
Z-1648
Z-1649
Z-1650
Z-1651
Z-1652
Z-1653
Z-1654
Z-1655
Z-1656
Z-1657
Z-1658
Z-1659
Z-1660
Z-1661
Z-1662
Z-1663
Z-1664
Z-1665
Z-1666
Z-1667
Z-1668
Z-1669
Z-1670
Z-1671
Z-1672
D1
1.417
1.496
1.575
1.614
1.693
1.811
1.890
1.969
2.008
2.126
2.126
2.126
2.362
2.362
2.480
2.638
2.756
2.756
2.756
2.874
2.874
3.071
3.228
3.228
3.228
3.386
3.386
3.622
3.622
3.622
3.622
3.780
3.780
3.937
3.937
3.937
4.134
4.134
4.134
4.291
4.291
4.291
4.291
4.764
4.764
5.000
5.118
5.118
5.315
5.315
5.315
5.315
5.512
4.512
5.709
5.709
5.709
5.906
5.906
6.102
6.102
D2
2.126
2.126
2.126
2.126
2.126
2.126
2.126
2.126
2.126
2.126
2.126
2.126
2.126
2.126
2.126
2.126
2.126
2.126
2.126
2.126
2.126
2.126
2.126
2.126
2.126
2.126
2.126
2.126
2.126
2.126
2.126
2.126
3.386
3.386
3.386
3.386
3.386
3.386
3.386
3.386
3.386
3.386
3.386
3.386
3.386
3.386
3.386
3.386
3.386
3.386
3.386
3.386
5
5
5
5
5
5
5
5
5
L
2.165
2.165
2.165
2.165
2.224
2.224
2.224
2.224
2.224
2.323
2.323
2.323
2.441
2.441
2.441
2.638
2.717
2.717
2.756
2.756
2.756
2.953
2.953
3.071
3.071
3.150
3.543
3.543
3.543
3.543
3.661
3.701
3.740
3.740
3.740
3.740
3.780
3.780
3.780
3.937
3.937
3.937
4.055
4.055
4.055
4.055
4.055
4.055
4.370
4.370
4.370
4.370
4.370
4.370
4.370
4.370
4.724
4.724
4.724
4.724
4.724
T
0.374
0.433
0.551
0.551
0.551
0.551
0.650
0.650
0.669
0.748
0.748
0.748
0.866
0.866
0.866
0.984
1.004
1.004
1.062
1.062
1.062
1.181
1.181
1.259
1.299
1.299
1.378
1.378
1.378
1.378
1.496
1.496
1.496
1.575
1.614
1.614
1.732
1.732
1.732
1.850
1.850
1.850
1.929
1.929
1.929
1.890
1.929
1.929
1.929
2.125
2.125
2.125
2.125
2.125
2.125
2.441
2.441
2.441
2.441
2.441
2.441
C
1.040
1.040
1.040
1.040
1.119
1.119
1.119
1.119
1.119
1.198
1.198
1.198
1.316
1.316
1.316
1.513
1.592
1.592
1.631
1.631
1.631
1.828
1.828
1.946
1.946
2.025
2.418
2.418
2.418
2.458
2.536
2.576
2.615
2.615
2.615
2.615
2.655
2.655
2.655
2.812
2.812
2.812
2.930
2.930
2.930
2.930
2.930
2.930
3.245
3.245
3.245
3.245
3.245
3.245
3.245
3.245
3.599
3.599
3.599
3.599
3.599
ATP maintains "in stock" one of the broadest ranges of 1"
drive sockets available to industry. OZAT 1" drive sizes are
equally well suited for construction, maintenance, and heavy
assembly application, as well as for precision bolting with
hydraulic bolting equipment.
19 -114
Size (in)
3/4
13/16
7/8
15/16
1
1-1/16
1-1/8
1-3/16
1-1/4
1-5/16
1-3/8
1-7/16
1-1/2
1-9/16
1-5/8
1-11/16
1-3/4
1-13/16
1-7/8
1-15/16
2
2-1/16
2-1/8
2-3/16
2-1/4
2-5/16
2-3/8
2-7/16
2-1/2
2-9/16
2-5/8
2-11/16
2-3/4
2-13/16
2-7/8
2-15/16
3
3-1/16
3-1/8
3-3/16
3-1/4
3-5/16
3-3/8
3-7/16
3-1/2
3-9/16
3-5/8
3-11/16
3-3/4
3-13/16
3-7/8
3-15/16
4
4-1/16
4-1/8
4-3/16
4-1/4
4-5/16
4-3/8
4-7/16
4-1/2
Part No.
Z-1612L
Z-1613L
Z-1614L
Z-1615L
Z-1616L
Z-1617L
Z-1618L
Z-1619L
Z-1620L
Z-1621L
Z-1622L
Z-1623L
Z-1624L
Z-1625L
Z-1626L
Z-1627L
Z-1628L
Z-1629L
Z-1630L
Z-1631L
Z-1632L
Z-1633L
Z-1634L
Z-1635L
Z-1636L
Z-1637L
Z-1638L
Z-1639L
Z-1640L
Z-1641L
Z-1642L
Z-1643L
Z-1644L
Z-1645L
Z-1646L
Z-1647L
Z-1648L
Z-1649L
Z-1650L
Z-1651L
Z-1652L
Z-1653L
Z-1654L
Z-1655L
Z-1656L
Z-1657L
Z-1658L
Z-1659L
Z-1660L
Z-1661L
Z-1662L
Z-1663L
Z-1664L
Z-1665L
Z-1666L
Z-1667L
Z-1668L
Z-1669L
Z-1670L
Z-1671L
Z-1672L
D1
1.417
1.496
1.575
1.614
1.693
1.811
1.890
1.969
2.008
2.126
2.126
2.126
2.362
2.362
2.480
2.638
2.756
2.756
2.756
2.874
2.874
3.071
3.228
3.228
3.228
3.386
3.386
3.622
3.622
3.622
3.622
3.780
3.780
3.937
3.937
3.937
4.134
4.134
4.134
4.291
4.291
4.291
4.291
4.764
4.764
5.000
5.118
5.118
5.315
5.315
5.315
5.315
5.512
4.512
5.709
5.709
5.709
5.906
5.906
6.102
6.102
D2
2.126
2.126
2.126
2.126
2.126
2.126
2.126
2.126
2.126
2.126
2.126
2.126
2.126
2.126
2.126
2.126
2.126
2.126
2.126
2.126
2.126
2.126
2.126
2.126
2.126
2.126
2.126
2.126
2.126
2.126
2.126
2.126
3.386
3.386
3.386
3.386
3.386
3.386
3.386
3.386
3.386
3.386
3.386
3.386
3.386
3.386
3.386
3.386
3.386
3.386
3.386
3.386
5.000
5.000
5.000
5.000
5.000
5.000
5.000
5.000
5.000
L
3.937
3.937
3.937
3.937
3.937
3.937
3.937
3.937
3.937
3.937
3.937
3.937
3.937
3.937
3.937
3.937
3.937
3.937
3.937
3.937
3.937
4.094
4.094
4.213
4.213
4.291
4.685
4.685
4.685
4.724
4.803
4.843
4.882
4.882
4.882
4.882
4.921
4.921
4.921
5.079
5.079
5.079
5.197
5.197
5.197
5.197
5.197
5.197
5.512
5.512
5.512
5.512
5.512
5.512
5.512
5.512
5.866
5.866
5.866
5.866
5.866
T
0.374
0.433
0.551
0.551
0.551
0.551
0.650
0.650
0.669
0.748
0.748
0.748
0.866
0.866
0.866
0.984
1.004
1.004
1.062
1.062
1.062
1.181
1.181
1.259
1.299
1.299
1.378
1.378
1.378
1.378
1.496
1.496
1.496
1.575
1.614
1.614
1.732
1.732
1.732
1.850
1.850
1.850
1.929
1.929
1.929
1.890
1.929
1.929
1.929
2.125
2.125
2.125
2.125
2.125
2.125
2.441
2.441
2.441
2.441
2.441
2.441
C
2.812
2.812
2.812
2.812
2.812
2.812
2.812
2.812
2.812
2.812
2.812
2.812
2.812
2.812
2.812
2.812
2.812
2.812
2.812
2.812
2.812
2.969
2.969
3.088
3.088
3.166
3.560
3.560
3.560
3.599
3.678
3.718
3.757
3.757
3.757
3.757
3.796
3.796
3.796
3.954
3.954
3.954
4.072
4.072
4.072
4.072
4.072
4.072
4.387
4.387
4.387
4.387
4.387
4.387
4.387
4.387
4.741
4.741
4.741
4.741
4.741
Deep Fractional Thinwall
Size (in)
7/8
15/16
1
1-1/16
1-1/8
1-3/16
1-1/4
1-5/16
1-3/8
1-7/16
1-1/2
1-9/16
1-5/8
1-11/16
1-3/4
1-13/16
Part No.
Z-1614LT
Z-1615LT
Z-1616LT
Z-1617LT
Z-1618LT
Z-1619LT
Z-1620LT
Z-1621LT
Z-1622LT
Z-1623LT
Z-1624LT
Z-1625LT
Z-1626LT
Z-1627LT
Z-1628LT
Z-1629LT
WWW.HANESSUPPLY.COM
D1
1.496
1.496
1.614
1.732
1.732
1.929
1.929
2.047
2.047
2.126
2.224
2.244
2.362
2.480
2.638
2.638
D2
2.126
2.126
2.126
2.126
2.126
2.126
2.126
2.126
2.126
2.126
2.126
2.126
2.126
2.126
2.126
2.126
L
3.937
3.937
3.937
3.937
3.937
3.937
3.937
3.937
3.937
3.937
3.937
3.937
3.937
3.937
3.937
3.937
T
1.024
1.024
1.024
1.024
1.299
1.299
1.339
1.496
1.496
1.496
1.732
1.732
1.732
1.968
2.008
2.008
C
2.812
2.812
2.812
2.812
2.812
2.812
2.812
2.812
2.812
2.812
2.812
2.812
2.812
2.812
2.812
2.812
Albany/NE Division:
518.438.0139
Rochester Division:
585.235.0160
FAX:
FAX:
FAX:
716.826.4412
518.438.5343
585.235.0229
CCISCO: 843.238.1338
FAX:
843.238.8337
Hand Tools
OZAT
SIX POINT FRACTIONAL SOCKETS
1" SQUARE DRIVE (continued)
Deep Metric Thinwall (continued)
Standard Metric Sizes
Size (in)
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
54
55
56
57
58
59
60
61
62
65
67
70
73
75
76
77
80
85
86
90
95
100
105
110
115
Part No.
Z-16M19
Z-16M20
Z-16M21
Z-16M22
Z-16M23
Z-16M24
Z-16M25
Z-16M26
Z-16M27
Z-16M28
Z-16M29
Z-16M30
Z-16M31
Z-16M32
Z-16M33
Z-16M34
Z-16M35
Z-16M36
Z-16M37
Z-16M38
Z-16M39
Z-16M40
Z-16M41
Z-16M42
Z-16M43
Z-16M44
Z-16M45
Z-16M46
Z-16M47
Z-16M48
Z-16M49
Z-16M50
Z-16M51
Z-16M52
Z-16M54
Z-16M55
Z-16M56
Z-16M57
Z-16M58
Z-16M59
Z-16M60
Z-16M61
Z-16M62
Z-16M65
Z-16M67
Z-16M70
Z-16M73
Z-16M75
Z-16M76
Z-16M77
Z-16M80
Z-16M85
Z-16M86
Z-16M90
Z-16M95
Z-16M100
Z-16M105
Z-16M110
Z-16M115
D1
36
37
38
40
41
42
43
45
46
47
48
50
51
51
54
54
54
54
57
60
60
63
63
63
67
67
70
70
70
73
73
73
73
78
82
82
82
82
86
86
86
88
92
92
92
96
100
100
105
105
105
115
115
127
135
135
145
150
155
D2
54
54
54
54
54
54
54
54
54
54
54
54
54
54
54
54
54
54
54
54
54
54
54
54
54
54
54
54
54
54
54
54
54
54
54
54
54
54
54
54
54
54
54
54
54
54
86
86
86
86
86
86
86
86
86
86
127
127
127
L
55
55
55
55
55
55
55
55
55
55
57
57
57
57
57
60
60
60
60
64
64
64
64
64
69
69
69
69
69
72
72
72
72
72
76
76
75
80
75
82
75
85
85
85
91
88
92
92
97
97
88
92
104
97
106
112
112
122
120
C
26
26
26
26
26
26
26
26
26
26
28
28
28
28
28
31
31
31
31
35
35
35
35
35
40
40
40
40
40
43
43
43
43
43
47
47
46
51
46
53
46
56
56
56
62
79
83
83
68
68
59
63
75
68
77
83
83
93
91
T
20
24
24
26
26
26
28
28
33
33
33
34
C
71
71
71
71
71
71
71
71
71
71
71
71
Deep Metric Thinwall
Size (in)
22
23
24
25
26
27
28
29
30
31
32
33
Part No.
Z-16M22LT
Z-16M23LT
Z-16M24LT
Z-16M25LT
Z-16M26LT
Z-16M27LT
Z-16M28LT
Z-16M29LT
Z-16M30LT
Z-16M31LT
Z-16M32LT
Z-16M33LT
D1
38
38
38
41
44
44
44
44
49
49
49
52
D2
54
54
54
54
54
54
54
54
54
54
54
54
L
100
100
100
100
100
100
100
100
100
100
100
100
Part No.
D1
D2
L
T
C
34
35
36
37
38
39
40
41
42
43
44
45
46
Z-16M34LT
Z-16M35LT
Z-16M36LT
Z-16M37LT
Z-16M38LT
Z-16M39LT
Z-16M40LT
Z-16M41LT
Z-16M42LT
Z-16M43LT
Z-16M44LT
Z-16M45LT
Z-16M46LT
52
52
54
54
54
54
54
54
54
54
54
54
54
54
54
54
54
54
54
54
54
54
54
54
54
54
100
100
100
100
100
100
100
100
100
100
100
100
100
34
38
38
38
43
43
43
44
44
50
50
51
51
71
71
71
71
71
71
71
71
71
71
71
71
71
L
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
104
104
105
105
105
112
105
112
118
118
118
124
124
124
130
130
132
132
140
140
140
143
143
149
149
T
9.5
10
10
10
12
12
13
13
13
14
14
16.5
16.5
16.5
17
19
19
19
19
22
21.5
21.5
22
21.5
25
21.5
21.5
25.5
23.5
23.5
27
23.5
27
27
30
27
28
33
28
33
28
28
35
35
38
38
41
41
44
44
37
40
49
43
49
54
54
62
57
C
71
71
71
71
71
71
71
71
71
71
71
71
71
71
71
71
71
71
71
71
71
71
71
71
71
71
71
71
71
71
71
71
71
71
75
75
76
76
76
83
83
83
89
89
89
95
95
95
101
101
103
103
111
111
111
114
114
120
120
Deep Metric Sizes
Size (in)
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
54
55
56
57
58
59
60
61
62
65
67
70
73
75
76
77
80
85
86
90
95
100
105
110
115
Part No.
Z-16M19L
Z-16M20L
Z-16M21L
Z-16M22L
Z-16M23L
Z-16M24L
Z-16M25L
Z-16M26L
Z-16M27L
Z-16M28L
Z-16M29L
Z-16M30L
Z-16M31L
Z-16M32L
Z-16M33L
Z-16M34L
Z-16M35L
Z-16M36L
Z-16M37L
Z-16M38L
Z-16M39L
Z-16M40L
Z-16M41L
Z-16M42L
Z-16M43L
Z-16M44L
Z-16M45L
Z-16M46L
Z-16M47L
Z-16M48L
Z-16M49L
Z-16M50L
Z-16M51L
Z-16M52L
Z-16M54L
Z-16M55L
Z-16M56L
Z-16M57L
Z-16M58L
Z-16M59L
Z-16M60L
Z-16M61L
Z-16M62L
Z-16M65L
Z-16M67L
Z-16M70L
Z-16M73L
Z-16M75L
Z-16M76L
Z-16M77L
Z-16M80L
Z-16M85L
Z-16M86L
Z-16M90L
Z-16M95L
Z-16M100L
Z-16M105L
Z-16M110L
Z-16M115L
D1
36
37
38
40
41
42
43
45
46
47
48
50
51
51
54
54
54
54
57
60
60
63
63
63
67
67
70
70
70
73
73
73
73
78
82
82
82
82
86
86
86
88
92
92
92
96
100
100
105
105
105
115
115
127
135
135
145
150
155
D2
54
54
54
54
54
54
54
54
54
54
54
54
54
54
54
54
54
54
54
54
54
54
54
54
54
54
54
54
54
54
54
54
54
54
54
54
54
54
54
54
54
54
54
54
54
54
86
86
86
86
86
86
86
86
86
86
127
127
127
19
Hand Tools
T
9.5
10
10
10
12
12
13
13
13
14
14
16.5
16.5
16.5
17
19
19
19
19
22
21.5
21.5
22
21.5
25
21.5
21.5
25.5
23.5
23.5
27
23.5
27
27
30
27
28
33
28
33
28
28
35
35
38
38
41
41
44
44
37
40
49
43
49
54
54
62
57
Size (in)
– continues –
WWW.HANESSUPPLY.COM
19 -115
Albany/NE Division:
518.438.0139
Rochester Division:
585.235.0160
FAX:
FAX:
FAX:
716.826.4412
518.438.5343
585.235.0229
CCISCO: 843.238.1338
FAX:
843.238.8337
Hand Tools
OZAT
Accessories:
Hex Driver Sockets:
Adapters
Fractional Sizes
Size
(in)
1/2
9/16
5/8
3/4
13/16
7/8
1
1-1/16
1-1/8
1-3/16
1-1/4
Part No.
Z-1608H
Z-1609H
Z-1610H
Z-1612H
Z-1613H
Z-1614H
Z-1616H
Z-1617H
Z-1618H
Z-1619H
Z-1620H
D1
2.125
2.125
2.125
2.125
2.125
2.125
2.125
2.125
2.125
2.125
2.125
Metric Sizes
L
2.91
2.91
2.91
2.91
3.07
3.07
3.07
3.23
3.23
3.23
3.43
Size
(in)
10
12
14
17
19
22
24
27
30
32
T
1.16
1.16
1.16
1.16
1.32
1.32
1.32
1.48
1.48
1.48
1.68
Part No.
16M10H
16M12H
16M14H
16M17H
16M19H
16M22H
16M24H.
16M27H
16M30H
16M32H
Budd Wheel Sockets
Size
17
21
13/16
15/16
13/16
15/16
13/16 x 1-1/2
Part No.
Z-16M17B
Z-16M21B
Z-1613B
Z-1615B
Z-1613BL
Z-1615BL
Z-1624BS
D1
40
47
1.85
2.07
1.85
2.07
2.24
D2
54
54
2.125
2.125
2.125
2.125
2.125
L
55
55
2.165
2.360
3.937
3.937
3.937
T
9
10
0.472
0.512
0.472
0.512
0.571
Extensions
Part No. D1
D2
A1612
1
3/4
A1624
1
1-1/2
A1695
1 #5 Spline
D1
2.125
2.125
2.125
2.125
2.125
2.125
2.125
2.125
2.125
2.125
L
2.91
2.91
2.91
2.91
2.91
3.07
3.07
3.23
3.23
3.43
T
1.16
1.16
1.16
1.16
1.16
1.32
1.32
1.48
1.48
1.68
L
2.750
3.346
4.330
Double Ended
Female Adapters
Part No.
AN1612
AN1616
AN2416
D1
1
1
1
D2
3/4
1
1-1/2
Part No.
E1604
E1605
E1606
E1607
E1610
E1613
D1
2.125
2.125
2.125
2.125
2.125
2.125
Universal Joint
L
4
5
6
7
10
13
Part No.
Z1603
Z1604
Z1605
Z1606
Z1607
Z1610
Z1613
Z1615
Z1616
Z1617
Retaining Rings And Pins
PIN
No.
P1654
P1686
P16127
Ring
No.
R1654
R1686
R16127
SIX POINT IMPACT SOCKETS
1-1/2" SQUARE DRIVE:
Double Square Impact Sockets:
Size
1-5/16
1-3/8
1-7/16
1-1/2
1-9/16
1-5/8
1-11/16
1-3/4
1-13/16
1-7/8
2
2-1/8
2-3/16
2-1/4
2-3/8
2-1/2
Part No.
DS-1621
DS-1622
DS-1623
DS-1624
DS-1625
DS-1626
DS-1627
DS-1628
DS-1629
DS-1630
DS-1632
DS-1634
DS-1635
DS-1636
DS-1638
DS-1640
D1
2.480
2.638
2.638
2.756
3.071
3.071
3.228
3.228
3.386
3.386
3.622
3.937
3.937
3.937
4.134
4.291
D2
2.126
2.362
2.362
2.362
2.362
2.362
2.362
2.362
2.362
2.362
2.362
2.362
2.362
2.362
2.362
2.362
L
2.883
2.283
2.283
2.441
2.441
2.441
2.638
2.638
2.638
2.756
2.756
2.953
3.071
3.071
3.228
3.465
T
0.748
0.748
0.748
0.866
0.866
0.866
0.984
1.005
1.005
1.063
1.063
1.181
1.260
1.260
1.378
1.378
C
1.283
1.283
1.283
1.441
1.441
1.441
1.638
1.638
1.638
1.756
1.756
1.953
2.071
2.071
2.228
2.465
L
3.189
3.189
3.189
3.425
3.425
3.465
3.465
3.465
3.465
3.465
3.465
3.819
3.819
3.937
3.937
3.937
T
0.748
0.748
0.748
0.866
0.866
0.866
0.984
1.005
1.005
1.063
1.063
1.181
1.260
1.260
1.378
1.378
C
2.189
2.189
2.189
2.425
2.425
2.465
2.465
2.465
2.465
2.465
2.465
2.819
2.819
2.937
2.937
2.937
Hand Tools
19
Size
1-5/16
1-3/8
1-7/16
1-1/2
1-9/16
1-5/8
1-11/16
1-3/4
1-13/16
1-7/8
2
2-1/8
2-3/16
2-1/4
2-3/8
2-1/2
Part No.
DS-1621L
DS-1622L
DS-1623L
DS-1624L
DS-1625L
DS-1626L
DS-1627L
DS-1628L
DS-1629L
DS-1630L
DS-1632L
DS-1634L
DS-1635L
DS-1636L
DS-1638L
DS-1640L
D1
2.480
2.638
2.638
2.756
3.071
3.071
3.228
3.228
3.386
3.386
3.622
3.937
3.937
3.937
4.134
4.291
D2
2.126
2.362
2.362
2.362
2.362
2.362
2.362
2.362
2.362
2.362
2.362
2.362
2.362
2.362
2.362
2.362
Size
1-5/16
1-3/8
1-7/16
1-1/2
1-9/16
1-5/8
1-11/16
1-3/4
1-13/16
1-7/8
1-15/16
2
2-1/16
2-1/8
2-3/16
2-1/4
2-5/16
2-3/8
2-7/16
2-1/2
2-9/16
2-5/8
2-11/16
2-3/4
2-13/16
2-7/8
2-15/16
3
3-1/16
3-1/8
3-3/16
3-1/4
3-5/16
3-3/8
3-7/16
3-1/2
3-9/16
3-5/8
3-11/16
3-3/4
3-13/16
3-7/8
3-15/16
4
4-1/16
4-1/8
4-3/16
4-1/4
Part No.
Z-2421
Z-2422
Z-2423
Z-2424
Z-2425
Z-2426
Z-2427
Z-2428
Z-2429
Z-2430
Z-2431
Z-2432
Z-2433
Z-2434
Z-2435
Z-2436
Z-2437
Z-2438
Z-2439
Z-2440
Z-2441
Z-2442
Z-2443
Z-2444
Z-2445
Z-2446
Z-2447
Z-2448
Z-2449
Z-2450
Z-2451
Z-2452
Z-2453
Z-2454
Z-2455
Z-2456
Z-2457
Z-2458
Z-2459
Z-2460
Z-2461
Z-2462
Z-2463
Z-2464
Z-2465
Z-2466
Z-2467
Z-2468
– continues –
19 -116
WWW.HANESSUPPLY.COM
D1
2.402
2.480
2.520
2.520
2.677
2.795
2.874
2.953
2.953
3.150
3.150
3.150
3.386
3.386
3.386
3.386
3.622
3.622
3.780
3.937
3.937
3.937
4.134
4.134
4.291
4.291
4.291
4.528
4.528
4.528
4.764
4.764
4.764
5.000
5.000
5.118
5.118
5.315
5.315
5.315
5.512
5.512
5.512
5.709
5.709
5.906
5.906
5.906
Part No.
U1616
Double Ended
Male Extensions
L
2.48
2.32
3.27
Square
Through Hex
Drive
Size
1
2-3/4 - 70mm
1
3-5/16 - 100mm
1
Above 3-5/16
Size
1
D2
3.386
3.386
3.386
3.386
3.386
3.386
3.386
3.386
3.386
3.386
3.386
3.386
3.386
3.386
3.386
3.386
3.386
3.386
3.386
3.386
3.386
3.386
3.386
3.386
3.386
3.386
3.386
3.386
3.386
3.386
3.386
3.386
3.386
3.386
3.386
3.386
3.386
5.000
5.000
5.000
5.000
5.000
5.000
5.000
5.000
5.000
5.000
5.000
L
2.953
2.953
3.150
3.150
3.150
3.150
3.150
3.150
3.150
3.228
3.228
3.228
3.465
3.465
3.583
3.583
3.583
3.740
3.740
3.740
3.740
3.937
3.937
3.937
4.134
4.134
4.134
4.331
4.331
4.331
4.724
4.724
4.724
4.724
4.724
4.724
4.724
4.724
4.921
4.921
4.921
4.921
4.921
4.921
4.921
4.921
4.921
5.315
T
0.748
0.748
0.748
0.866
0.866
0.866
0.984
1.004
1.004
1.036
1.063
1.063
1.181
1.181
1.260
1.280
1.300
1.378
1.378
1.378
1.378
1.496
1.496
1.496
1.575
1.614
1.614
1.732
1.732
1.770
1.850
1.850
1.850
1.930
1.930
1.930
1.930
1.930
1.930
1.930
2.125
2.125
2.125
2.125
2.125
2.126
2.440
2.440
C
1.328
1.328
1.525
1.525
1.525
1.525
1.525
1.525
1.525
1.603
1.603
1.603
1.840
1.840
1.958
1.958
1.958
2.115
2.115
2.115
2.115
2.312
2.312
2.312
2.509
2.509
2.509
2.706
2.706
2.706
3.099
3.099
3.099
3.099
3.099
3.099
3.099
3.099
3.099
3.296
3.296
3.296
3.296
3.296
3.296
3.296
3.296
3.690
D1
1.3
1.3
1.3
1.3
1.3
1.3
1.3
1.3
1.3
1.3
L
3
4
5
6
7
10
13
15
16
17
Albany/NE Division:
518.438.0139
Rochester Division:
585.235.0160
FAX:
FAX:
FAX:
716.826.4412
518.438.5343
585.235.0229
CCISCO: 843.238.1338
FAX:
843.238.8337
Hand Tools
OZAT
1-1/2" SQUARE DRIVE (continued):
Size
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
54
55
56
57
58
59
60
61
62
65
67
70
73
75
76
80
85
86
90
95
100
105
110
115
120
125
130
Standard Fractional Sizes (continued)
Size
4-5/16
4-3/8
4-7/16
4-1/2
4-5/8
4-3/4
4-7/8
5
5-1/8
5-3/16
5-1/4
5-3/8
Part No.
Z-2469
Z-2470
Z-2471
Z-2472
Z-2474
Z-2476
Z-2478
Z-2480
Z-2482
Z-2483
Z-2484
Z-2486
D1
6.102
6.102
6.102
6.299
6.496
6.693
6.693
7.087
7.087
7.087
7.480
7.480
D2
5.000
5.000
5.000
5.000
5.000
5.000
5.000
5.000
5.000
5.000
5.000
5.000
L
5.315
5.315
5.315
5.315
5.709
5.709
7.709
5.906
6.299
6.299
5.283
6.299
C
3.690
3.690
3.690
3.690
4.084
4.084
4.084
4.281
4.674
4.674
4.574
4.674
T
0.748
0.748
0.748
0.866
0.866
0.866
0.984
1.004
1.004
1.036
1.063
1.063
1.181
1.181
1.260
1.280
1.300
1.378
1.378
1.378
1.378
1.496
1.496
1.496
1.575
1.614
1.614
1.732
1.732
1.770
1.850
1.850
1.850
1.930
1.930
1.930
1.930
1.930
1.930
1.930
2.125
2.125
2.125
2.125
2.125
2.126
2.440
2.440
2.440
2.440
2.440
2.440
2.640
2.640
2.640
2.830
2.990
2.990
2.990
C
3.887
3.887
3.887
3.887
3.887
3.887
3.887
3.887
3.887
3.887
3.887
3.887
3.887
3.887
3.887
3.887
3.887
3.887
3.887
3.887
3.887
3.887
3.887
3.887
3.887
3.887
3.887
3.887
3.887
3.887
3.887
3.887
3.887
3.887
3.887
3.887
3.887
3.887
4.281
4.281
4.281
4.281
4.281
4.281
4.281
4.281
4.281
4.674
2.674
4.674
4.674
4.674
5.068
5.068
5.068
5.462
5.658
5.658
5.658
Size
1-5/16
1-3/8
1-7/16
1-1/2
1-9/16
1-5/8
1-11/16
1-3/4
1-13/16
1-7/8
1-15/16
2
2-1/16
2-1/8
2-3/16
2-1/4
2-5/16
2-3/8
2-7/16
2-1/2
2-9/16
2-5/8
2-11/16
2-3/4
2-13/16
2-7/8
2-15/16
3
3-1/16
3-1/8
3-3/16
3-1/4
3-5/16
3-3/8
3-7/16
3-1/2
3-9/16
3-5/8
3-11/16
3-3/4
3-13/16
3-7/8
3-15/16
4
4-1/16
4-1/8
4-3/16
4-1/4
4-5/16
4-3/8
4-7/16
4-1/2
4-5/8
4-3/4
4-7/8
5
5-1/8
5-3/16
5-3/8
Part No.
Z-2421L
Z-2422L
Z-2423L
Z-2424L
Z-2425L
Z-2426L
Z-2427L
Z-2428L
Z-2429L
Z-2430L
Z-2431L
Z-2432L
Z-2433L
Z-2434L
Z-2435L
Z-2436L
Z-2437L
Z-2438L
Z-2439L
Z-2440L
Z-2441L
Z-2442L
Z-2443L
Z-2444L
Z-2445L
Z-2446L
Z-2447L
Z-2448L
Z-2449L
Z-2450L
Z-2451L
Z-2452L
Z-2453L
Z-2454L
Z-2455L
Z-2456L
Z-2457L
Z-2458L
Z-2459L
Z-2460L
Z-2461L
Z-2462L
Z-2463L
Z-2464L
Z-2465L
Z-2466L
Z-2467L
Z-2468L
Z-2469L
Z-2470L
Z-2471L
Z-2472L
Z-2474L
Z-2476L
Z-2478L
Z-2480L
Z-2482L
Z-2483L
Z-2486L
D1
2.402
2.480
2.520
2.520
2.677
2.795
2.874
2.953
2.953
3.150
3.150
3.150
3.386
3.386
3.386
3.386
3.622
3.622
3.780
3.937
3.937
3.937
4.134
4.134
4.291
4.291
4.291
4.528
4.528
4.528
4.764
4.764
4.764
5.000
5.000
5.118
5.118
5.315
5.315
5.315
5.512
5.512
5.512
5.709
5.709
5.906
5.906
5.906
6.102
6.102
6.102
6.299
6.496
6.693
6.693
7.087
7.087
7.087
7.480
D2
3.386
3.386
3.386
3.386
3.386
3.386
3.386
3.386
3.386
3.386
3.386
3.386
3.386
3.386
3.386
3.386
3.386
3.386
3.386
3.386
3.386
3.386
3.386
3.386
3.386
3.386
3.386
3.386
3.386
3.386
3.386
3.386
3.386
3.386
3.386
3.386
3.386
5.000
5.000
5.000
5.000
5.000
5.000
5.000
5.000
5.000
5.000
5.000
5.000
5.000
5.000
5.000
5.000
5.000
5.000
5.000
5.000
5.000
5.000
L
5.512
5.512
5.512
5.512
5.512
5.512
5.512
5.512
5.512
5.512
5.512
5.512
5.512
5.512
5.512
5.512
5.512
5.512
5.512
5.512
5.512
5.512
5.512
5.512
5.512
5.512
5.512
5.512
5.512
5.512
5.512
5.512
5.512
5.512
5.512
5.512
5.512
5.512
5.906
5.906
5.906
5.906
5.906
5.906
5.906
5.906
5.906
6.299
6.299
6.299
6.299
6.299
6.693
6.693
6.693
7.087
7.286
7.283
7.283
D1
60
60
60
60
64
64
64
70
70
70
70
75
75
75
75
75
80
80
80
80
80
86
86
86
86
92
92
92
96
96
100
100
105
109
109
115
115
121
127
130
135
140
150
155
160
165
170
180
D2
86
86
86
86
86
86
86
86
86
86
86
86
86
86
86
86
86
86
86
86
86
86
86
86
86
86
86
86
86
86
86
86
86
86
86
86
86
86
86
86
127
127
127
127
127
127
127
127
L
75
75
75
75
80
80
80
80
80
80
80
80
80
80
80
80
82
82
82
82
82
89
89
92
92
92
92
92
96
96
96
101
101
105
105
110
110
116
116
118
118
125
125
137
137
145
145
158
T
16.5
17
17
19
19
19
22
21.5
21.5
22
21.5
25
21.5
21.5
25.5
23.5
23.5
27
23.5
27
27
30
27
28
32.5
28
33
28
28
35
35
38
38
41
41
44
37
40
49
43
49
54
54
62
57
67
67
76
C
34
34
34
34
39
39
39
39
39
39
39
39
39
39
39
39
41
41
41
41
41
47
47
50
50
50
50
50
54
54
54
59
59
64
64
69
69
79
79
79
84
84
84
94
94
104
104
119
L
140
140
140
140
140
140
140
140
140
140
140
140
140
140
140
140
140
140
140
140
140
140
140
140
140
140
140
140
140
140
T
16.5
17
17
19
19
19
22
21.5
21.5
22
21.5
25
21.5
21.5
25.5
23.5
23.5
27
23.5
27
27
30
27
28
32.5
28
33
28
28
35
C
99
99
99
99
99
99
99
99
99
99
99
99
99
99
99
99
99
99
99
99
99
99
99
99
99
99
99
99
99
99
Deep Metric Sizes
OZAT’s exclusive electro chemical machining process, (ECM) produces a far
stronger socket than one manufactured by conventional machining or broaching
methods. The exceptional strength of the OZAT-1-1/2" drive sockets often makes
them the preferred choice of hydraulic bolting specialists. Speciality sockets for
the precision bolting market are available from ATP.
Size
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
54
55
56
57
58
59
60
61
62
Part No.
Z-24M32L
Z-24M33L
Z-24M34L
Z-24M35L
Z-24M36L
Z-24M37L
Z-24M38L
Z-24M39L
Z-24M40L
Z-24M41L
Z-24M42L
Z-24M43L
Z-24M44L
Z-24M45L
Z-24M46L
Z-24M47L
Z-24M48L
Z-24M49L
Z-24M50L
Z-24M51L
Z-24M52L
Z-24M54L
Z-24M55L
Z-24M56L
Z-24M57L
Z-24M58L
Z-24M59L
Z-24M60L
Z-24M61L
Z-24M62L
D1
60
60
60
60
64
64
64
70
70
70
70
75
75
75
75
75
80
80
80
80
80
86
86
86
86
92
92
92
96
96
D2
86
86
86
86
86
86
86
86
86
86
86
86
86
86
86
86
86
86
86
86
86
86
86
86
86
86
86
86
86
86
19
Hand Tools
T
2.440
2.440
2.440
2.440
2.640
2.640
2.640
2.830
2.990
2.990
2.980
2.990
Part No.
Z-24M32
Z-24M33
Z-24M34
Z-24M35
Z-24M36
Z-24M37
Z-24M38
Z-24M39
Z-24M40
Z-24M41
Z-24M42
Z-24M43
Z-24M44
Z-24M45
Z-24M46
Z-24M47
Z-24M48
Z-24M49
Z-24M50
Z-24M51
Z-24M52
Z-24M54
Z-24M55
Z-24M56
Z-24M57
Z-24M58
Z-24M59
Z-24M60
Z-24M61
Z-24M62
Z-24M65
Z-24M67
Z-24M70
Z-24M73
Z-24M75
Z-24M76
Z-24M80
Z-24M85
Z-24M86
Z-24M90
Z-24M95
Z-24M100
Z-24M105
Z-24M110
Z-24M115
Z-24M120
Z-24M125
Z-24M130
– continues –
WWW.HANESSUPPLY.COM
19 -117
Albany/NE Division:
518.438.0139
Rochester Division:
585.235.0160
FAX:
FAX:
FAX:
716.826.4412
518.438.5343
585.235.0229
CCISCO: 843.238.1338
FAX:
843.238.8337
Hand Tools
OZAT
1-1/2" SQUARE DRIVE (continued):
Standard Fractional Sizes (continued)
Deep Metric Sizes (continued)
Size
Part No.
D1
D2
L
T
C
65
67
70
73
75
76
80
85
86
90
95
100
105
110
115
120
125
130
Z-24M65L
Z-24M67L
Z-24M70L
Z-24M73L
Z-24M75L
Z-24M76L
Z-24M80L
Z-24M85L
Z-24M86L
Z-24M90L
Z-24M95L
Z-24M100L
Z-24M105L
Z-24M110L
Z-24M115L
Z-24M120L
Z-24M125L
Z-24M130L
100
100
105
109
109
115
115
121
127
130
135
140
150
155
160
165
170
180
86
86
86
86
86
86
86
86
86
86
127
127
127
127
127
127
127
127
140
140
140
140
140
140
140
140
140
140
150
150
150
160
160
170
170
185
35
38
38
41
41
44
37
40
49
43
49
54
54
62
57
67
67
76
99
99
99
99
99
99
99
99
99
99
109
109
109
119
119
129
129
144
Accessories:
Adapters
Part No.
A2416
A2440
A2495
DI
1-1/2
1-1/2
1-1/2
D2
1
2-1/2
#5 Spline
L
3.75
3.50
4.33
Double Ended Female Adapters
Part No.
AN2416
AN2424
AN4024
D1
1-1/2
1-1/2
1-1/2
D2
1
1-1/2
2-1/2
L
3.27
3.35
4.53
Size
1-1/2
Part No.
E2406
E2412
Part No.
U2424
L
6
12
Double Ended Male Extensions
Part No.
Z2404
Z2405
Z2410
Z2420
D1
1.93
1.93
1.93
1.93
L
4
5
10
20
Retaining Pins And Rings
Square
Drive
1-1/2
1-1/2
Through Hex
Size
3-9/16-90mm
Above 3-9/16
Pin No.
P2486
P24127
Ring No.
R2486
R24127
#5 SPLINE DRIVE
Hand Tools
19
Size
Part No.
3/4
Z-9512
13/16
Z-9513
7/8
Z-9514
15/16
Z-9515
1
Z-9516
1-1/16
Z-9517
1-1/8
Z-9518
1-3/16
Z-9519
1-1/4
Z-9520
1-5/16
Z-9521
1-3/8
Z-9522
1-7/16
Z-9523
– continues –
19 -118
D1
1.890
1.890
1.890
1.890
1.929
2.008
2.008
2.126
2.362
2.362
2.362
2.480
D2
2.362
2.362
2.362
2.362
2.362
2.362
2.362
2.362
2.362
2.362
2.362
2.362
Part No.
Z-9524
Z-9525
Z-9526
Z-9527
Z-9528
Z-9529
Z-9530
Z-9531
Z-9532
Z-9533
Z-9534
Z-9535
Z-9536
Z-9537
Z-9538
Z-9539
Z-9540
Z-9541
Z-9542
Z-9543
Z-9544
Z-9545
Z-9546
Z-9547
Z-9548
Z-9549
Z-9550
Z-9552
Z-9553
Z-9554
Z-9556
Z-9558
Z-9560
Z-9562
Z-9564
D1
2.480
2.638
2.638
2.638
2.874
2.874
2.874
2.874
3.228
3.228
3.228
3.228
3.465
3.465
3.465
3.465
3.937
3.937
3.937
3.937
3.937
4.134
4.134
4.134
4.291
4.291
4.291
5.062
5.062
5.062
5.129
5.256
5.309
5.442
5.511
D2
2.362
2.362
2.362
2.362
2.362
2.362
2.362
2.362
2.362
3.386
3.386
3.386
3.386
3.386
3.386
3.386
3.386
3.386
3.386
3.386
3.386
3.386
3.386
3.386
3.386
3.386
3.386
3.386
3.386
3.386
3.386
3.386
3.386
3.386
3.386
L
3.150
3.150
3.150
3.307
3.307
3.307
3.465
3.465
3.465
3.661
3.661
3.780
3.780
3.780
3.858
5.858
3.858
3.858
4.016
4.016
4.016
4.252
4.252
4.252
4.488
4.488
4.488
4.909
4.909
4.909
4.909
4.909
4.909
4.909
4.909
T
0.866
0.866
0.866
0.984
1.000
1.000
1.063
1.063
1.063
1.181
1.181
1.260
1.299
1.299
1.378
1.378
1.378
1.378
1.496
1.496
1.496
1.575
1.614
1.614
1.732
1.732
1.732
2.106
2.106
2.106
2.106
2.106
2.106
2.106
2.106
C
1.400
1.400
1.400
1.557
1.557
1.577
1.715
1.715
1.715
1.911
1.911
2.030
2.030
2.030
2.108
2.108
2.108
2.108
2.226
2.266
2.266
2.502
2.502
2.502
2.738
2.738
2.738
2.781
2.781
2.781
2.781
2.781
2.781
2.781
2.781
T
0.374
0.435
0.512
0.512
0.512
0.512
0.650
0.650
0.669
0.748
0.748
0.748
0.866
0.866
0.866
0.984
1.000
1.000
1.063
1.063
1.063
1.181
1.181
1.260
1.299
1.299
1.378
1.378
1.378
1.378
1.496
1.496
1.496
1.575
1.614
1.614
1.732
1.732
1.732
C
4.549
4.549
4.549
4.549
4.549
4.549
4.549
4.549
4.549
4.549
4.549
4.549
4.549
4.549
4.549
4.549
4.549
4.549
4.549
4.549
4.549
4.549
4.549
4.549
4.549
4.549
4.549
4.549
4.549
4.549
4.549
4.549
4.549
4.549
4.549
4.549
4.628
4.628
4.628
Extensions
Universal Joint
Size
1-1/2
1-9/16
1-5/8
1-11/16
1-3/4
1-13/16
1-7/8
1-15/16
2
2-1/16
2-1/8
2-3/16
2-1/4
2-5/16
2-3/8
2-7/16
2-1/2
2-9/16
2-5/8
2-11/16
2-3/4
2-13/16
2-7/8
2-15/16
3
3-1/16
3-1/8
3-1/4
3-5/16
3-3/8
3-1/2
3-5/8
3-3/4
3-7/8
4
L
2.756
2.756
2.756
2.756
2.756
2.756
2.756
2.756
2.953
3.031
3.031
3.031
T
0.374
0.435
0.512
0.512
0.512
0.512
0.650
0.650
0.669
0.748
0.748
0.748
C
1.006
1.006
1.006
1.006
1.006
1.006
1.006
1.006
1.203
1.281
1.281
1.281
Sizes
3/4
13/16
7/8
15/16
1
1-1/16
1-1/8
1-3/16
1-1/4
1-5/16
1-3/8
1-7/16
1-1/2
1-9/16
1-5/8
1-11/16
1-3/4
1-13/16
1-7/8
1-15/16
2
2-1/16
2-1/8
2-3/16
2-1/4
2.5/16
2-3/8
2-7/16
2-1/2
2-9/16
2-5/8
2-11/16
2-3/4
2-13/16
2-7/8
2-15/16
3
3-1/16
3-1/8
Part No.
Z-9512L
Z-9513L
Z-9514L
Z-9515L
Z-9516L
Z-9517L
Z-9518L
Z-9519L
Z-9520L
Z-9521L
Z-9522L
Z-9523L
Z-9524L
Z-9525L
Z-9526L
Z-9527L
Z-9528L
Z-9529L
Z-9530L
Z-9531L
Z-9532L
Z-9533L
Z-9534L
Z-9535L
Z-9536L
Z-9537L
Z-9538L
Z-9539L
Z-9540L
Z-9541L
Z-9542L
Z-9543L
Z-9544L
Z-9545L
Z-9546L
Z-9547L
Z-9548L
Z-9549L
Z-9550L
WWW.HANESSUPPLY.COM
D1
1.890
1.890
1.890
1.890
1.929
2.008
2.008
2.126
2.362
2.362
2.362
2.480
2.480
2.638
2.638
2.638
2.874
2.874
2.874
2.874
3.228
3.228
3.228
3.228
3.465
3.465
3.465
3.465
3.937
3.937
3.937
3.937
3.937
4.134
4.134
4.134
4.291
4.291
4.291
D2
2.362
2.362
2.362
2.362
2.362
2.362
2.362
2.362
2.362
2.362
2.362
2.362
2.362
2.362
2.362
2.362
2.362
2.362
2.362
2.362
2.362
3.386
3.386
3.386
3.386
3.386
3.386
3.386
3.386
3.386
3.386
3.386
3.386
3.386
3.386
3.386
3.386
3.386
3.386
L
6.299
6.299
6.299
6.299
6.299
6.299
6.299
6.299
6.299
6.299
6.299
6.299
6.299
6.299
6.299
6.299
6.299
6.299
6.299
6.299
6.299
6.299
6.299
6.299
6.299
6.299
6.299
6.299
6.299
6.299
6.299
6.299
6.299
6.299
6.299
6.299
6.378
6.378
6.378
Albany/NE Division:
518.438.0139
Rochester Division:
585.235.0160
FAX:
FAX:
FAX:
716.826.4412
518.438.5343
585.235.0229
CCISCO: 843.238.1338
FAX:
843.238.8337
Hand Tools
OZAT
Deep Metric Sizes (continued)
#5 SPLINE DRIVE (continued)
Size
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
54
55
56
57
58
59
60
61
62
65
67
70
73
75
76
80
Part No.
Z-95M19
Z-95M20
Z-95M21
Z-95M22
Z-95M23
Z-95M24
Z-95M25
Z-95M26
Z-95M27
Z-95M28
Z-95M29
Z-95M30
Z-95M31
Z-95M32
Z-95M33
Z-95M34
Z-95M35
Z-95M36
Z-95M37
Z-95M38
Z-95M39
Z-95M40
Z-95M41
Z-95M42
Z-95M43
Z-95M44
Z-95M45
Z-95M46
Z-95M47
Z-95M48
Z-95M49
Z-95M50
Z-95M51
Z-95M52
Z-95M54
Z-95M55
Z-95M56
Z-95M57
Z-95M58
Z-95M59
Z-95M60
Z-95M61
Z-95M62
Z-95M65
Z-95M67
Z-95M70
Z-95M73
Z-95M75
Z-95M76
Z-95M80
D1
48
48
48
48
48
49
49
51
51
51
54
54
60
60
60
60
60
63
63
63
67
67
67
67
67
73
73
73
73
73
73
82
82
82
82
82
88
88
88
88
88
88
88
100
100
100
105
105
109
115
D2
60
60
60
60
60
60
60
60
60
60
60
60
60
60
60
60
60
60
60
60
60
60
60
60
60
60
60
60
60
60
60
60
60
60
60
60
86
76
86
86
86
86
86
86
86
86
86
86
86
86
T
0.374
0.394
0.394
0.394
0.472
0.472
0.512
0.512
0.512
0.551
0.551
0.650
0.650
0.650
0.669
0.669
0.748
0.748
0.748
0.866
0.866
0.866
0.866
0.846
0.984
0.846
0.846
1.004
0.925
0.925
1.063
0.925
1.063
1.063
1.181
1.063
1.102
1.299
1.102
1.299
1.102
1.102
1.378
1.378
1.496
1.496
1.614
1.614
1.732
1.457
C
26
26
26
26
26
26
26
26
26
26
26
26
31
31
31
33
33
33
33
36
36
36
36
36
40
40
40
40
40
44
44
44
44
44
49
49
52
52
52
52
52
54
56
56
58
58
64
64
70
70
L
160
160
160
160
160
160
160
160
160
160
160
160
160
160
160
160
160
160
160
160
160
160
160
160
T
0.374
0.394
0.394
0.394
0.472
0.472
0.512
0.512
0.512
0.551
0.551
0.650
0.650
0.650
0.669
0.669
.0748
0.748
0.748
0.866
0.866
0.866
0.866
0.846
C
116
116
116
116
116
116
116
116
116
116
116
116
116
116
116
116
116
116
116
116
116
116
116
116
Deep Metric Sizes
Size
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
Part No.
Z-95M19L
Z-95M20L
Z-95M21L
Z-95M22L
Z-95M23L
Z-95M24L
Z-95M25L
Z-95M26L
Z-95M27L
Z-95M28L
Z-95M29L
Z-95M30L
Z-95M31L
Z-95M32L
Z-95M33L
Z-95M34L
Z-95M35L
Z-95M36L
Z-95M37L
Z-95M38L
Z-95M39L
Z-95M40L
Z-95M41L
Z-95M42L
– continues –
D1
48
48
48
48
48
49
49
51
51
51
54
54
60
60
60
60
60
63
63
63
67
67
67
67
D2
60
60
60
60
60
60
60
61
60
60
60
60
60
60
60
60
60
60
60
60
60
60
60
60
Part No.
Z-95M43L
Z-95M44L
Z-95M45L
Z-95M46L
Z-95M47L
Z-95M48L
Z-95M49L
Z-95M50L
Z-95M51L
Z-95M52L
Z-95M54L
Z-95M55L
Z-95M56L
Z-95M57L
Z-95M58L
Z-95M59L
Z-95M60L
Z-95M61L
Z-95M62L
Z-95M65L
Z-95M67L
Z-95M70L
Z-95M73L
Z-95M75L
Z-95M76L
Z-95M80L
D1
67
73
73
73
73
73
73
82
82
82
82
82
88
88
88
88
88
88
88
100
100
100
105
105
109
115
D2
60
60
60
60
60
60
60
60
60
60
60
60
86
76
86
86
86
86
86
86
86
86
86
86
86
86
L
160
160
160
160
160
160
160
160
160
160
160
160
160
160
160
160
160
160
160
160
160
160
160
162
162
162
T
0.984
0.846
0.846
1.004
0.925
0.925
1.063
0.925
1.063
1.063
1.181
1.063
1.102
1.299
1.102
1.299
1.102
1.102
1.378
1.378
1.496
1.496
1.614
1.614
1.732
1.457
C
116
116
116
116
116
116
116
116
116
116
116
116
116
116
116
116
116
116
116
116
116
116
116
116
118
118
BUDD Wheel Sockets
Size
13/16x1-1/2
13/16
Part No.
Z-9524BS
Z-9513B
D1
2.48
2.008
D2
2.36
2.36
L
4.133
2.756
T
0.571
0.472
Accessories:
Adapters
Size
#5
#5
1-1/2
Extensions
Part No.
A9516
A9524
A2495
D2
1
1-1/2
#5
Part No.
E9508
E9515
Retaining Rings and Pins
Universal Joint
Size
#5 Spline Drive
L
8
15
Spline Through Hex
Drive
Size
#5
2-3/16 - 55mm
#5
Above 2-3/16
Part No.
U9595
Pin No.
P9560
P9586
Ring No.
R9560
R9586
Universal Joint Repair Kits
Part No. Description
95UK1 Retainer Kit Contents: Hex Plunger
Lock Button, Inner & Outer Springs
95UK2 Pin Kit Contents: Drive Pin, Trunions,
Spirol Pins
95UK3 Retrofit Kit Contents: All Parts From
the Above 2 Kits
FLAT STRIKING WRENCHES
– 12 POINT OPENING –
Fractional Sizes
Part No.
FSW14
FSW15
FSW16
FSW17
FSW18
FSW19
FSW20
FSW21
FSW22
FSW23
FSW24
FSW25
FSW26
FSW27
FSW28
Sizes
7/8
15/16
1
1-1/16
1-1/8
1-3/16
1-1/4
1-5/16
1-3/8
1-7/16
1-1/2
1-9/16
1-5/8
1-11/16
1-3/4
D
1-13/16
1-13/16
1-13/16
1-13/16
1-13/16
2-1/16
2-1/16
2-1/16
2-1/16
2-15/16
2-15/16
2-15/16
2-15/16
2-15/16
2-15/16
C
9/16
9/16
9/16
5/8
5/8
11/16
11/16
11/16
11/16
11/16
11/16
11/16
13/16
13/16
13/16
L
6-1/2
6-1/2
6-1/2
7-1/16
7-1/16
7-1/2
7-1/2
7-1/2
7-1/2
8-1/16
8-1/16
8-1/16
9-1/16
9-1/16
9-1/16
19
Hand Tools
L
70
70
70
70
70
70
70
70
70
70
70
70
75
75
75
77
77
77
77
80
80
80
80
80
84
84
84
84
84
88
88
88
88
88
93
93
96
96
96
96
96
98
100
100
102
102
108
108
114
114
Size
43
44
45
46
47
48
49
50
51
52
54
55
56
57
58
59
60
61
62
65
67
70
73
75
76
80
– continues –
WWW.HANESSUPPLY.COM
19 -119
Albany/NE Division:
518.438.0139
Rochester Division:
585.235.0160
FAX:
FAX:
FAX:
716.826.4412
518.438.5343
585.235.0229
CCISCO: 843.238.1338
FAX:
843.238.8337
Hand Tools
OZAT
FLAT STRIKING WRENCHES
Metric Sizes
– 12 POINT OPENING – (continued)
Fractional Sizes (continued)
Hand Tools
19
Part No.
FSW29
FSW30
FSW31
FSW32
FSW33
FSW34
FSW35
FSW36
FSW37
FSW38
FSW39
FSW40
FSW41
FSW42
FSW43
FSW44
FSW45
FSW46
FSW47
FSW48
FSW49
FSW50
FSW51
FSW52
FSW53
FSW54
FSW55
FSW56
FSW57
FSW58
FSW59
FSW60
FSW61
FSW62
FSW63
FSW64
FSW65
FSW66
FSW67
FSW68
FSW69
FSW70
FSW71
FSW72
FSW74
FSW76
FSW78
FSW80
FSW82
FSW83
FSW84
FSW86
FSW88
FSW90
FSW92
FSW94
FSW96
FSW98
FSW100
FSW102
FSW104
FSW106
FSW108
FSW110
FSW112
FSW114
FSW116
FSW118
FSW120
FSW122
FSW124
FSW125
FSW126
FSW128
FSW130
FSW132
FSW134
FSW136
FSW140
FSW142
FSW144
19 -120
Sizes
1-13/16
1-7/8
1-15/16
2
2-1/16
2-1/8
2-3/16
2-1/4
2-5/16
2-3/8
2-7/16
2-1/2
2-9/16
2-5/8
2-11/16
2-3/4
2-13/16
2-7/8
2-15/16
3
3-1/16
3-1/8
3-3/16
3-1/4
3-5/16
3-3/8
3-7/16
3-1/2
3-9/16
3-5/8
3-11/16
3-3/4
3-13/16
3-7/8
3-15/16
4
4-1/16
4-1/8
4-3/16
4-1/4
4-5/16
4-3/8
4-7/16
4-1/2
4-5/8
4-3/4
4-7/8
5
5-1/8
5-3/16
5-1/4
5-3/8
5-1/2
5-5/8
5-3/4
5-7/8
6
6-1/8
6-1/4
6-3/8
6-1/2
6-5/8
6-3/4
6-7/8
7
7-1/8
7-1/4
7-3/8
7-1/2
7-5/8
7-3/4
7-13/16
7-7/8
8
8-1/8
8-1/4
8-3/8
8-1/2
8-5/8
8-7/8
9
D
2-15/16
2-15/16
2-15/16
3-1/8
3-1/8
3-1/8
3-3/8
3-3/8
3-3/8
3-11/16
3-11/16
3-11/16
4
4
4
4-5/16
4-5/16
4-5/16
4-5/16
4-5/16
4-5/16
4-15/16
4-15/16
4-15/16
4-15/16
4-15/16
4-15/16
4-15/16
5-9/16
5-9/16
5-9/16
5-9/16
5-9/16
5-9/16
6-1/8
6-1/8
6-1/8
6-1/8
6-1/8
6-1/8
6-11/16
6-11/16
6-11/16
6-11/16
6-11/16
7-3/16
7-3/16
7-3/16
7-15/16
7-15/16
7-15/16
7-15/16
8-1/4
8-1/4
9
9
9
9
9
9-7/16
10-7/16
10-7/16
10-7/16
10-7/16
10-7/16
10-7/16
11-7/16
11-7/16
11-7/16
11-7/16
11-7/16
11-7/16
11-7/16
11-7/16
11-7/16
12-5/8
12-5/8
12-5/8
12-5/8
12-5/8
12-5/8
C
7/8
7/8
7/8
15/16
15/16
15/16
1
1
1
1
1
1
1-3/16
1-3/16
1-3/16
1-5/16
1-5/16
1-5/16
1-5/16
1-5/16
1-5/16
1-7/16
1-7/16
1-7/16
1-7/16
1-7/16
1-7/16
1-7/16
1-9/16
1-9/16
1-9/16
1-9/16
1-9/16
1-9/16
1-3/4
1-3/4
1-3/4
1-3/4
1-3/4
1-3/4
1-7/8
1-7/8
1-7/8
1-7/8
1-7/8
2-1/8
2-1/8
2-1/8
2-5/16
2-5/16
2-5/16
2-5/16
2-5/16
2-5/16
2-1/2
2-1/2
2-1/2
2-1/2
2-1/2
2-1/2
2-3/4
2-3/4
2-3/4
2-3/4
2-3/4
2-3/4
2-15/16
2-15/16
2-15/16
2-15/16
2-15/16
2-15/16
2-15/16
2-15/16
2-15/16
3-1/8
3-1/8
3-1/8
3-1/8
3-1/8
3-1/8
L
9-7/16
9-7/16
9-7/16
10-1/16
10-1/16
10-1/16
10-5/8
10-5/8
10-5/8
11
11
11
11-13/1
11-13/1
11-13/1
13
13
13
13
13
13
14-3/16
14-3/16
14-3/16
14-3/16
14-3/16
14-3/16
14-3/16
15-3/8
15-3/8
15-3/8
15-3/8
15-3/8
15-3/8
16-9/16
16-9/16
16-9/16
16-9/16
16-9/16
16-9/16
17-11/16
17-11/16
17-11/16
17-11/16
17-11/16
18-7/8
18-7/8
18-7/8
20-1/2
20-1/2
20-1/2
20-1/2
20-1/2
20-1/2
22-13/16
22-13/16
22-13/16
22-13/16
22-13/16
22-13/16
25-9/16
25-9/16
25-9/16
25-9/16
25-9/16
25-9/16
27-9/16
27-9/16
27-9/16
27-9/16
27-9/16
27-9/16
27-9/16
27-9/16
27-9/16
29-1/2
29-1/2
29-1/2
29-1/2
29-1/2
29-1/2
Part No.
FSWM22
FSWM23
FSWM24
FSWM25
FSWM26
FSWM27
FSWM28
FSWM29
FSWM30
FSWM31
FSWM32
FSWM33
FSWM34
FSWM35
FSWM36
FSWM37
FSWM38
FSWM39
FSWM40
FSWM41
FSWM42
FSWM43
FSWM44
FSWM45
FSWM46
FSWM47
FSWM48
FSWM49
FSWM50
FSWM51
FSWM52
FSWM54
FSWM55
FSWM56
FSWM57
FSWM58
FSWM59
FSWM60
FSWM61
FSWM62
FSWM65
FSWM67
FSWM70
FSWM73
FSWM75
FSWM76
FSWM80
FSWM85
FSWM86
FSWM90
FSWM95
FSWM210
FSWM215
FSWM225
FSWM230
FSWM100
FSWM105
FSWM110
FSWM115
FSWM120
FSWM125
FSWM130
FSWM135
FSWM135
FSWM140
FSWM145
FSWM150
FSWM155
FSWM160
FSWM165
FSWM170
FSWM175
FSWM180
FSWM185
FSWM190
FSWM195
FSWM200
Size
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
54
55
56
57
58
59
60
61
62
65
67
70
73
75
76
80
85
86
90
95
210
215
225
230
100
105
110
115
120
125
130
135
135
140
145
150
155
160
165
170
175
180
185
190
195
200
WWW.HANESSUPPLY.COM
D
43
43
43
43
43
46
46
46
52
52
52
52
52
52
58
58
58
58
58
66
66
66
66
66
74
74
74
74
80
80
80
80
86
86
86
86
86
93
93
93
102
102
110
110
110
110
125
125
125
142
142
320
320
320
320
115
155
170
170
182
182
202
202
202
210
228
228
228
240
265
265
265
265
290
290
290
290
C
15
15
15
15
15
16
16
16
17
17
17
17
17
17
18
18
18
18
18
20
20
20
20
20
22
22
22
22
24
24
24
24
25
25
25
25
25
26
26
26
30
30
33
33
33
33
36
36
36
40
40
80
80
80
80
45
45
48
48
54
54
58
58
58
58
64
64
64
64
70
70
70
70
75
75
75
75
L
165
165
165
165
165
180
180
180
190
190
190
190
190
190
205
205
205
205
205
230
230
230
230
230
240
240
240
240
255
255
255
255
270
270
270
270
270
280
280
280
300
300
330
330
330
330
360
360
360
390
390
750
750
750
750
420
420
450
450
480
480
520
520
520
520
580
580
580
580
650
650
650
650
700
700
700
700
Albany/NE Division:
518.438.0139
Rochester Division:
585.235.0160
FAX:
FAX:
FAX:
716.826.4412
518.438.5343
585.235.0229
CCISCO: 843.238.1338
FAX:
843.238.8337
Hand Tools
OZAT/ Posi Lock
OFFSET STRIKING WRENCHES
Posi Lock
– 12 POINT OPENING –
Manual Pullers
Fractional Sizes
Part No.
SW17
SW18
SW20
SW21
SW23
SW24
SW26
SW27
SW28
SW29
SW30
SW31
SW32
SW34
SW35
SW36
SW37
SW38
SW40
SW41
SW42
SW44
SW46
SW47
SW48
SW50
Size
1-1/16
1-1/8
1-1/4
1-5/16
1-7/16
1-1/2
1-5/8
1-11/16
1-3/4
1-13/16
1-7/8
1-15/16
2
2-1/8
2-3/16
2-1/4
2-5/16
2-3/8
2-1/2
2-9/16
2-5/8
2-3/4
2-7/8
2-15/16
3
3-1/8
D
2-1/16
2-1/16
2-1/16
2-1/16
2-11/16
2-11/16
2-11/16
3-1/4
3-1/4
3-1/4
3-1/4
3-1/4
3-1/4
3-1/4
3-1/4
3-1/4
3-1/4
4-5/16
4-5/16
4-5/16
4-5/16
5
5
5
5
5
C
1
1
1
1
1-1/4
1-1/4
1-1/4
1-3/8
1-3/8
1-3/8
1-3/8
1-3/8
1-3/8
1-1/2
1-1/2
1-1/2
1-1/2
1-3/4
1-3/4
1-3/4
1-3/4
2
2
2
2
2
•
•
•
•
L
10-5/8
10-5/8
10-5/8
10-5/8
12-1/4
12-1/4
12-1/4
13-3/8
13-3/8
13-3/8
13-3/8
13-3/8
13-3/8
14-3/16
14-3/16
14-3/16
14-3/16
15
15
15
15
15-3/4
15-3/4
15-3/4
15-3/4
15-3/4
Single
Square
Double
Square
12 models to choose from
Available in 2 or 3 jaw models
2-40 ton capacity
Reach: 4" - 14"; Spread: 5" - 25"
Long jaws available
Cage® to guide jaws for
fast set up, solid contact
Nut recessed to
Center bolt threads
avoid mushrooming and superior safety
designed for less effort
and disfiguration
to apply high torque
from impact
Hardened tip
T-handle locks jaw
opening precisely
where you set it
Leverage up front for viselike power and no slippage
Sizes larger than shown
in the charts, open end,
short handled, six point,
etc., are available on a
special order basis.
Specify ECM Opening Type (Check One)
Double
Hex
•
•
•
•
•
Jaw Features:
REQUEST FOR PRICE QUOTE
Single
Hex
Saves time, money and labor
One-man operation
Locks like a vise
Jaws made of 4140 steel
Rectangular
Part #
104
106
108
110
113
116
204
206
208
210
213
216
Description
3 Jaw 4" 5 Ton
3 Jaw 6" 10 Ton
3 Jaw 8" 17 Ton
3 Jaw 10" 20 Ton
3 Jaw 12" 30 Ton
3 Jaw 14" 40 Ton
2 Jaw 4" 2 Ton
2 Jaw 6" 6 Ton
2 Jaw 8" 12 Ton
2 Jaw 10" 14 Ton
2 Jaw 12" 25 Ton
2 Jaw 14" 35 Ton
Slim tapered jaws
allow for easier gripping and better
access to tight spots
Tip
Protector
Bolt
Extender
Other
Internal Slide
Hammer Set - PM16
POSI LOCK’s PM16 is ideal for the
removal of many tough internal pulling
jobs such as crankshaft pilot bearings,
bearing cups, needle bearings, bushings, seal and grease retainers. Tool
board and accessories
are included. Create an
external slide hammer
puller by coupling POSI
LOCKTM’s model 104 or
204 with the slide rod
2.5 lb. hammer or 5 lb.
hammer (10563).
Specify Socket Type (Check One)
Specify Critical Dimensions, in necessary.
(Leave blank for default)
Transmission Bearing Puller TJ-1
E. Bolt Clear. Depth
I. Taper Length
B. Drive Outside Diam.
F. Opening Depth
J. Bolt Clear Diam.
C. Overall Length
G. Nut Side Diam.
K/L. Rec. Size
D. Shoulder Length
H. Across Flats
Other Info:
Quantity:
Applications/Comments:
WWW.HANESSUPPLY.COM
19 -121
19
Hand Tools
A. Square Drive
Transmission bearing removal takes minutes... not hours when you add
POSI LOCK’s transmission jaws (11054T) to the model 208 puller creating our TJ-1 puller. Jaws clamp in snap ring grooves as narrow as .070"
to allow removal of front input shaft bearings on 1955-present 3 speed,
4 speed, 5 speed, 3 speed overdrive and 4 speed overdrive
manual transmissions on rear wheel drive foreign and
domestic cars, trucks and vans.
The 208 and 210 pullers with their standard
jaws are used on front wheel drive vehicles
(Chrysler, Ford, foreign, etc.) to remove front
drive hubs (for CV joint replacement) and
hanger bearings as well as numerous
other applications on any
vehicle. The cage® control
design makes these pullers
safe and easy to use.
Albany/NE Division:
518.438.0139
Rochester Division:
585.235.0160
FAX:
FAX:
FAX:
716.826.4412
518.438.5343
585.235.0229
CCISCO: 843.238.1338
FAX:
843.238.8337
Hand Tools
POSI LOCK / Railway Handle Corp.
POSI LOCK’s Hydraulic Sets
POSI LOCK’s complete hydraulic sets include puller, cylinder, pump, pressure gauge, gauge adapter, lift plate, couplers, 10' hose, ram points and
transport cart. The 10 and 15 ton hydraulic puller sets DO NOT include
transport carts. Basic hydraulic sets that include only the puller, cylinder,
lift plate and ram points are also available for all sizes.
Choose your hydraulic sets by jaws, reach and tonnage required and
then pick your preference in pumps as follows:
Bent Manure, Barley & Header Fork
Handles W/F – 1-7/16" Dia.
Length
(ft)
4
4-1/2
5
5-1/2
Wt. Per
Dozen (lbs)
22
24
26
28
X
Grade
52
55
58
61
#1
Grade
53-F
56-F
59-F
Bent Spading Fork Handles W/F
(Light Bend) – 1-1/2" Dia.
PHWS-108
10 Ton, 3 Jaw w/ Walk-Pac Pump
Description
3 Jaw 8" 10 Ton
3 Jaw 10" 15 Ton
3 Jaw 12" 25 Ton
3 Jaw 14" 50 Ton
2 Jaw 8" 10 Ton
2 Jaw 10" 15 Ton
2 Jaw 12" 25 Ton
2 Jaw 14" 50 Ton
Set w/
Electric
Pump
Part #
PHES-108
PHES-110
PHES-113
PHES-116
PHES-208
PHES-210
PHES-213
PHES-216
Set w/
Air
Pump
Part #
PHAS-108
PHAS-110
PHAS-113
PHAS-116
PHAS-208
PHAS-210
PHAS-213
PHAS-216
Set w/
Set w/
Basic Set
Manual
Walk-Pac
w/o
Pump
Pump
Pump
Part #
Part #
Part #
PHMS-108 PHWS-108 PHB-108
PHMS-110
PHB-110
PHMS-113
PHB-113
PHMS-116
PHB-116
PHMS-208 PHWS-208 PHB-208
PHMS-210
PHB-210
PHMS-213
PHB-213
PHMS-216
PHB-216
Length
(ft)
4
4-1/2
Wt. Per
Dozen (lbs)
24
26
X
Grade
72
75
#1
Grade
73-F
76-F
Bent Chaff, Ensilage & Heavy Fork Handles
W/F (Heavy Bend)
Length
(ft)
4' Ensilage
4-1/2' Ensilage
4' Chaff
4-1/2'
Wt. Per
Dozen (lbs)
26
28
25
28
X
Grade
72-E
75-E
72-C
75-C
#1
Grade
73-EF
76-EF
73-CF
76-CF
Railway Handle Corporation
Seed, Coke, Ensilage, Mill, Heavy Manure
Fork Handles W/F –
REPLACEMENT HANDLES:
Drive fit handles should be soaked in hot water prior to driving into shovel
so that the wood will be flexible enough to bend. Lubricating the shovel
socket will help simplify the installation.
Our Handles and Grades are Industry Standard for Replacement Uses.
• X-Grade: Medium to heavy weight, tough, quality Ash. Selected for long
service, permitting minor blemishes which do not affect service. This
grade is smooth sanded and given a clear lacquer finish.
• #1-Grade: Good weight, serviceable Ash handle, permitting defects or blemishes that do not materially affect service. Fire sealed and lacquered finish.
1-1/2" Dia.
Length
Wt. Per
X
#1
(in)
Dozen (lbs)
Grade
Grade
30" D-Grip
26
85
86-F
Spading Fork Handles W/F – 1-1/2" Dia.
30" D-Grip
25
95
96-F
Straight Hay Fork Handles
with Tubular Ferrules and Caps – 1-3/8" Dia.
Length
(ft)
4
4-1/2
5
5-1/2
6
12
Hand Tools
19
Wt. Per
Dozen (lbs)
19
21
24
26
28
58
X
Grade
2
5
8
11
14
29
#1
Grade
3-F
6-F
9-F
Length
Wt. Per
(in)
Dozen (lbs)
32" D-Grip
26
36" Chopped Hay
30
D-Grip
Bent Hay, Alfalfa & Chopped Hay Fork
Handles Tubular Ferruled and Capped – 1-3/8" Dia.
Length
(ft)
4
4-1/2
5
5-1/2
19 -122
Wt. Per
Dozen (lbs)
19
21
24
26
X
Grade
35
38
41
44
#1
Grade
36-F
39-F
42-F
Manure, Barley & Chopped Hay Fork
Handles W/F – 1-7/16" Dia.
X
Grade
105
108
#1
Grade
106-F
109-F
Rake Handles (Bored & Chucked)
Length
(ft)
5
5-1/2
6
Wt. Per
Dozen (lbs)
17
19
21
WWW.HANESSUPPLY.COM
X
Grade
112
115
118
#1
Grade
113-F
Albany/NE Division:
518.438.0139
Rochester Division:
585.235.0160
FAX:
FAX:
FAX:
716.826.4412
518.438.5343
585.235.0229
CCISCO: 843.238.1338
FAX:
843.238.8337
Hand Tools
Railway Handle Corp.
Rake Handles – Garden Rakes or
Blackland Hoe Handles (Bored with Ferrules)
Length
(ft)
5
5-1/2
6
Wt. Per
Dozen (lbs)
19
21
23
X
Grade
122
125
128
Mortar Hoe Handles – Bored with Short Ferrule
Length
(ft)
5
5-1/2
6
#1
Grade
123-F
Wt. Per
Dozen (lbs)
22
24
26
X
Grade
252
255
258
#1
Grade
253-F
256-F
Mortar Hoe – Asphalt Rake & Corn Drag
Handles (Specify Type) with Tubular Ferrules and Caps
Hook Handles
– Heavy Potato Hook,
Stone & Manure Hook (Bored with Ferrules)
Length
(ft)
4-1/2
5
5-1/2
Wt. Per
Dozen (lbs)
21
23
26
X
Grade
162
165
168
Length
(ft)
5
5-1/2
6
6-1/2
7
#1
Grade
163-F
166-F
Garden, Meadow & Light Cotton Hoe
Handles – Bored & Chucked (without Ferrules)
Length
(ft)
4
4-1/3
4-1/2
5
Wt. Per
Dozen (lbs)
14
15
16
17
X
Grade
172
175
178
181
X
Grade
272
275
278
281
284
#1
Grade
273-F
Planters Eye Hoe and Fire Rake Handles
Length
(ft x in)
4-1/2' x 1-1/2"
4-1/2' x 1-3/4"
5' x 1-3/4"
5' x 2"
#1
Grade
173-F
176-F
179-F
182-F
Wt. Per
Dozen (lbs)
23
25
27
30
32
Wt. Per
Dozen (lbs)
18
21
23
24
X
Grade
295
301
313
316
#1
Grade
296-F
302-F
314-F
317-F
Ash Boat Hook Handles – 1-1/2" Dia.
Garden, Meadow & Light Cotton Hoe
Handles – Bored with Ferrules
Length
(ft)
4
4-1/3
4-1/2
5
Wt. Per
Dozen (lbs)
16
17
18
19
X
Grade
192
195
198
201
#1
Grade
193-F
196-F
199-F
202-F
Length
(ft)
6
8
10
12
Bored and Chucked (without Ferrules)
Wt. Per
Dozen (lbs)
17
20
X
Grade
212
215
#1
Grade
213-F
216-F
Wt. Per
Dozen (lbs)
19
22
X
Grade
232
235
(For Short Ferrules)
Length
(ft)
5
5-1/2
6
Wt. Per
Dozen (lbs)
20
22
24
X
Grade
242
245
248
Wt. Per
Dozen (lbs)
36
49
62
73
X Grade
721
722
723
724
– Sanded Finish Only
#1
Grade
233-F
236-F
Length
(ft)
4
Wt. Per
Dozen (lbs)
12
X Grade
951
Bent Razorback or Single Bend Shovel
Handles – Without Shoulder
– Bored and Chucked
Length
(in)
48
54
30" D-Grip
Wt. Per
Dozen (lbs)
20
21
20
WWW.HANESSUPPLY.COM
X
Grade
392
395
401
19
Hand Tools
Mortar Hoe Handles
X Grade
751
718
719
720
Lawn and Broom Rake Handles
Heavy Cotton Hoe Handles – Bored with Ferrules
Length
(ft)
4-1/2
5
Wt. Per
Dozen (lbs)
28
34
46
56
Ash Pike Poles – 1-5/8" Dia.
Heavy Cotton Hoe Handles
Length
(ft)
4-1/2
5
Length
(ft)
6
8
10
12
#1
Grade
393-F
396-F
402-F
19 -123
Albany/NE Division:
518.438.0139
Rochester Division:
585.235.0160
FAX:
FAX:
FAX:
716.826.4412
518.438.5343
585.235.0229
CCISCO: 843.238.1338
FAX:
843.238.8337
Hand Tools
Railway Handle Corp.
Hollowback Shovel, Spade and Scoop
Handles – with Shoulder
Length
(in)
48
54
30" D-Grip
Wt. Per
Dozen (lbs)
20
21
20
X
Grade
411
414
420
Length
(in)
44-1/2
46-1/2
48
54
24" D-Grip
#1
Grade
412-F
415-F
421-F
Light Grain and Gravel Scoop Handles
– with Shoulder
Length
(in)
30" D-Grip
Wt. Per
Dozen (lbs)
18
X
Grade
435
Solid Socket Shovel Handles – with Shoulder
X
Grade
512
515
518
521
535
#1
Grade
513-F
516-F
519-F
522-F
536-F
Solid Shank Shovel Handles – with Shoulder
Length
(in)
44-1/2
46-1/2
48
54
24" D-Grip
#1
Grade
436-F
Wt. Per
Dozen (lbs)
17
18
20
23
16
Wt. Per
Dozen (lbs)
17
18
18
23
18
X
Grade
555
558
561
564
575
#1
Grade
556-F
559-F
562-F
565-F
576-F
Lock Socket Shovel Handles
– Ames Regular Weight
Length
(in)
54
30" D-Grip
Wt. Per
Dozen (lbs)
23
20
X
Grade
442
448
Post Hole Digger Handles
Square Eye for Atlas, Hercules & Similar Diggers
Round Ends for Lightning Diggers –
Flat Ends for Eureka Diggers
#1
Grade
443-F
449-F
Length
(ft)
4' Square
4' Round
4' Flat
6' Square
8' Square
6' Round
8' Round
Featherlight Pattern
Length
(in)
51
30" D-Grip
Wt. Per
Dozen (lbs)
18
18
X
Grade
804
810
#1
Grade
805-F
811-F
Wt. Per
Dozen (lbs)
15
15
15
23
25
23
25
X
Grade
662
665
668
6-662
8-662
6-665
8-665
#1
Grade
663-F
666-F
669-F
Drive Fit Shovel Handles
Lock Socket Spade Handles
Length
(in)
54
30" D-Grip
Wt. Per
Dozen (lbs)
23
20
X
Grade
821
827
Length
4'
30" D-Grip
#1
Grade
822-F
828-F
Wt. Per
Dozen (lbs)
20
20
X
Grade
902
912
#1
Grade
903-F
913-F
Telegraph Shovel and Spoon Handles
Straight Razorback Shovel Handles
Hand Tools
19
Length
(in)
48
27" D-Grip
Wt. Per
Dozen (lbs)
20
20
X
Grade
482
488
#1
Grade
483-F
489-F
– 1-3/4" Dia.
Length
(ft)
8
10
Wt. Per
Dozen (lbs)
60
77
D-Grip
Pattern
19 -124
WWW.HANESSUPPLY.COM
Ash XX
Grade
693
695

19-Hand Tools - Hanes Supply, Inc.

Transcription

Similar documents

xm series

Softub T-220 - Softub of the Carolinas

K9 SUPERFUEL TM Human Grade Ingredients

Softub T-140 - Softub of the Carolinas

VFX-9/13 Pneumatic Combination Tool for Polypropylene

SHRINKFAST.

SC-2300 spec

Com-Pac Yachts Sail Away Pricing New 2016 Models

PREPOSITIONS OF PLACE

recycling done right - Vancouver